Views
1 year ago

Download document - Meiko UK

Download document - Meiko UK

Download document - Meiko

Meiko WRAS approval details & numbers WRAS Approval Number: 0910322 Free standing food waste disposal units with a stainless steel hopper and integral cutting ring and stainless steel spout. The flow is controlled by a solenoid valve (ASCO). Maximum working pressure 4 bar. Note The unit is supplied with a spout which must be installed to comply with an AUK3 air gap. Size: ½" BSP (M). Model: Disperator 500 Series Waste Disposal. Marking: Label on body showing Disperator Excellent. Data label on body showing manufactures name address and technical information. Note: Manufacturer: Factor: Meiko (UK) Ltd WRAS Approval Number: 1003336 Range of under counter glass washing machines having a solenoid valve (Invensys) fitted to the cold water inlet which supplies water to the heater within the machine. The appliance has a commercial salt regenerated water softener built in. Maximum supply pressure 5.0 bar. Size: ¾” BSP (F) inlet Model: Meiko ECO530 F-M EW10 Glasswasher Marking: Front panel badged MEIKO, ECOSTAR 530F GW. Data label on front panel bottom right-hand side corner showing Manufacturers Meiko, manufacturers address, Type, Serial number, DVGW, Voltage, KW rating of boiler, Boiler contents and year of manufacture Note: This appliance has a Fluid Category 3 backflow prevention device built in. Manufacturer: Meiko Maschinebau GmbH & Co KG Factor: Meiko (UK) Ltd WRAS Approval Number: 1007051 `Topic` range of bed pan washing machines. Flow is controlled via a solenoid valve (A&K Muller) and discharges via a type `AA` airgap arrangement, which incorporates an aerator at the outlet (Neoperl). The appliances also incorporate a strainer at the inlet (A&K Muller). Maximum working pressure 6.0 bar. Size: ¾” BSP male inlets. Model: Meiko topic 10.2, 20.2 & 40.2. Marking: Topic, Meiko, Meiko logo printed on control panel.Meiko, Meiko logo, model number, and product information printed on adhesive label on front panel and inside door. Note: These appliances incorporate a Fluid category 5 backflow prevention device. Manufacturer: Meiko Maschinebau GMBH Factor: Meiko (UK) Ltd WRAS Approval Number: 1111099 `Meiko TopLine` range of bedpan washing machines. Flow is controlled by two normally closed solenoid valves incorporating a dirt trap arrangement with stainless steel strainers, and plastic flow regulators and discharges via a type `AA` air gap. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C. Size: ¾” BSP male inlets. Model: Meiko TopLine 10 (Wall mounted). Meiko TopLine 20 (Floor standing). Meiko TopLine 30 (Wall installation). Meiko TopLine 40 (Cabinet installation). Marking: Meiko, TopLine on control panel.Meiko, model number, company details product information on servicing hatch. Note: These appliances incorporate a Fluid Category 5 backflow prevention device. Manufacturer: Meiko Maschinebau GmbH & Co KG Factor: Meiko (UK) Ltd WRAS Approval Number: 1207338 Bed pan washing and disinfection machine. Flow is controlled via a solenoid valve and discharges via a type `AA` airgap arrangement. Maximum working pressure 5.0 bar & maximum supply temperature 60ºC. Size: ¾ BSP (M) inlet connections Model: MEIKO TOPIC 10 MEIKO TOPIC 20 MEIKO TOPIC 40 MEIKO TOPIC 40 E10 = wall mounting model20 = floor mounted model40 = cabinet model40E = small cabinet model Marking: Front casing badged MEIKO TOPIC. Data label at the base of front casing stating MEIKO TOPIC and serial number. Data label inside of top door stating manufacturers name, Type and serial number. Manufacturer: Meiko Maschinebau GmbH & Co KG Factor: Meiko (UK) Ltd WRAS Approval Number: 0812089 `K-Tronic` and `B-Tronic` range of commercial dishwashing machines with two separate water supplies one feeding the final rinse via a strainer (AUK Muller) and solenoid valve (AUK Muller) and discharges through a type `AA` air gap arrangement through a float valve (AUK Muller). The other supply to the sump is via a strainer (AUK Muller), solenoid valve (AUK Muller) and discharges via an `AA` air gap arrangement providing fluid category 5 protection. Maximum working pressure 2.5 bar. Size: ¾" BSP inlet. Model: B & K Tronic range.K200 V/KV/VA/P/I/VP/VAP/CSSTop.K400 V/KV/VA/P/I/VP/VAP/CSSTop.Eco K200KA15B190 V/P/CSSTopB230 V/VA/VAP/CSSTop B350 V/VA/VAP/CSSTopB460 VA/VAP/CSSTop B580 VA/VAP/CSSTopB690 V/VA/VAP/CSSTop B810 VA/VAP/CSSTopBA VAT, BA VAP, BA VAS, BA HAT, BA HAS, BA G, BA B, BA C, BTA 160, BTA 240, BA133. Marking: Model number and technical data printed on adhesive label on body. Meiko and Clean Controls printed on control panel. Meiko embossed into body. Manufacturer: Meiko (UK) Ltd Factor: Meiko (UK) Ltd www.meiko-uk.co.uk Please contact our UK sales office on 01753 215120 for further information

Thoroughly Modern Meiko - University at Buffalo Libraries

library.buffalo.edu

Here - Meiko Takechi Arquillos Photography

meikophoto.com

HH FebMar10.pmd - American Haflinger Registry

haflingerhorse.com

Download - School of Electronic & Computing Systems

ceas.uc.edu

EcoStar 545 D Pass-through model EcoStar 430 F ... - GoHospitality

gohospitality.com.au

PURE SIMPLE - Meiko Takechi Arquillos

meikophoto.com

Penetration Test Tool for XML-based Web Services

nds.rub.de

Artist Album 7 Worlds Collide ft. KT Tunstall The Sun Came Out A. A. ...

exit977.org

Low Latency MPI for Meiko CS/2 and ATM Clusters - IPDPS ...

ipdps.cc.gatech.edu

MIKE control technology - MEIKO Maschinenbau GmbH & Co. KG

meiko.info

MEIKO Trolley washing solutions - GoHospitality

gohospitality.com.au

GMC Honors Tea Ceremony - Green Mountain College

greenmtn.edu

meiko: green solutions for greener hotels, restaurants and other ...

oser.com

The forward-looking control technology New - GoHospitality

gohospitality.com.au