DS TECH US_CAD Motox Catalogue 2011_1

1275 Newton, local 15 

Boucherville, Qc, 

Canada, J4B 5H2 

MOTOX 

Answers for industry. 

MOTOX Gearmotors and Gear Units 

Catalog CAN/USA 2011 

(450) 655-7447 

info@pt-dstech.com 

www.dstech.ca




(450) 655-7447 


www.dstech.ca 

BEVEL HELICAL GEAR MOTORS AND GEAR UNITS 

TORQUE 177000 lb-in / 20000 Nm 

POWER 200 hp / 150 KW 

OUTPUT SPEED 0.06 .. 367 rpm 

HELICAL WORM GEAR MOTORS AND GEAR UNITS 

TORQUE 14000 lb-in / 1590 Nm 

POWER 20 hp / 15 kW 


HELICAL GEAR MOTORS AND GEAR UNITS 

Motox Gear Motors 

TORQUE 177000 lb-in / 20000 Nm 



PARALLEL SHAFT GEAR MOTORS AND GEAR UNITS 

TORQUE 300900 lb-in / 34000 Nm 



0 - 1


Branch Drives 

0 - 2 

Agitator Cooling Tower Drives 

DR/ZR ZK 

Mixer Drives 

FM KM 

Extruder Drives 

FAE KAE 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

General Terms and Conditions of Sale for Products and Services 

The following terms and conditions shall apply to the sale of any products 

and the provision of any services by Siemens Canada Limited "Siemens") 

to you. Your receipt and/ or accept ance of the products or services shall 

constitute your acceptance of these terms and conditions. When taken 

together wit h the quotati on, purchase order or ot her applicab le documents 

setting out the order for the products and/or services, these terms and 

conditions shall create a binding agreement between you and Siemens and 

shall sup ersede all previous quotations, orders or agreements. The laws of 

the Province of Ontario and the appli cable l aws of Canada shall govern 

the validi ty, in terpretation and en forcemen t of t hese t erms and condi tions 

of sale and any contract of which these term s and conditions are a part. 

Les parties aux présentes ont exigé que la présente entente, de même que 

tout e la corres pondance et la document ati on relative à cette ent ente, soient 

rédigées en langue anglaise. 

1. ACCEPTANCE / BINDING AGREEMENT / CHANGES / 

CANCELLATION/ RETURNED PRODUCTS 

In the event of any conflict or inconsistency between these terms and 

conditions of sale and any terms and conditions contained in an order form 

you subm itted to Siemens, these terms and conditions shall prevail. No 

waiver, alteration or modification of these terms and conditions shall be 

binding on Siemens un less they are made in writing, they specifically refer 

to t he sect ions of these t erms and condit ions w hich are b eing m odifi ed, 

and they are signed by a duly authorized representative of Siemens. 

Your order as governed by these terms and conditions cannot be changed 

or cancelled by you, except with Siemens' prior written con sent, which 

may be withheld in its sole discretion. Where Siemens authorizes a change 

or cancellation, it reserves the right to charge you with reasonable costs 

based upon expenses Siemens has already incurred and commitments it 

has made, including, without limitation, any labour done, material 

purchased and also including overhead, reasonab le profit and cancellation 

charges from Siemens' suppliers. 

Products may not be returned t o Siemen s wit hout Si emens' prior writt en 

permission. Siemens reserves the right to d ecline all retu rns or to accept 

them subject t o a handling/res tocki ng charge. Even aft er Siemen s has 

authorized the return of products for credit, Siemens reserves the right to 

adjust the amount of any credit given to you on the return of products 

based on the conditions of the products on arrival in Siem ens' wareh ou se. 

Cred it for returned products will b e issued only where such products are 

returned by you and not by any subsequent owner. Products will be 

considered for return only if they are in their original condition and 

packaging. 

Unless otherwise stated, all products and prices are provided Free Carrier, 

Carrier location identified in the Pu rchas e Order or, if not named, the 

carrier and location selected by Siemens, Loaded, all in accordance with 

Incoterms 2000. If you request reasonably in advance, Siemens will assist 

you in the selection of th e methods of transportation, including any special 

transport ati on requirem ents , all at your cost and expense. Any del ivery 

schedules provided by Siemens are approximate and dependent upon (i) 

prompt receipt by Siem ens of all necessary information from you, 

including manufacturing specificati ons, if applicab le, (i i) mark et 

conditions and availability of all required supplies and raw materials, and 

(iii) events of Force Majeure set out below. Siemens may extend delivery 

schedules or may, at its option , cancel any order in full or in part without 

liabili ty other than to return any depos it or prepayment which i s unearned 

by reason of the cancellation. Siem ens reserves the righ t to make partial 

shipm ents and to subm it invoices for partial shipments. 

Although you assume all responsibility for losses and damages occurring 

following delivery by Siemens to the named carrier, Siemens will provide 

you with reasonable assistance in the event that you have a claim against 

the named carri er. Cl aim s for shortages in del ivered products must be 

made in writing to Siemens within ten (10) days after receipt of produ cts 

by you. Otherwise, it shall be conclusively p resumed that the produ cts 

were delivered in their entirety. 


Unless otherwise stated, products shall be installed by you and at your 

ri sk. In the e vent that Si eme ns i s requested to su pervise such insta lla tion, 

Si emens' responsi bilit y shall be lim ited t o exerci sing that degree of sk ill 

cu stoma ry i n the trade . Y ou sha ll re mai n responsi ble for a ll ot her a spects 

of the work including com pliance with applicable law and regulation. 

4. TE RM S OF PAYME NT / TAXES 

Unless otherwise stated, invoices on "open account" shipment are 

payable, with no cash discount, within thirty (30 ) days of invoice date. 

Where a cash discount is offered, the discount price is computed from the 

date of invoice. Should paymen t not be made to Siemens when due, 

Si emens reserves the right, until th e price has been ful ly paid in cash, to 

ch arge you w it h inte re st on su ch ove rdue pa ym ents at t he rate of e ighte en 

percent (18%) per annum or the maximum rate permitted by law. Th e 

ch arging of such intere st, how e ver, does not obli gat e S iem ens t o gra nt 

an y e xte nsion of t ime . Your obliga tion to ma ke full pa yme nt for goods 

and se rvi ce s provide d by Si eme ns is uncondi tional a nd you expressly 

wa ive a ll right to wi thhold, set off or redu ce pa ym ent for a ny rea son, 

including warrant y claims. 

Prices quoted exclude GS T, provi nci al, m unici pal sales, use, value-added 

or taxes of any kind, except for those levied on Siemens’ income. While 

Si emens w ill use reas onable effort s to appl y all exigibl e taxes t o i ts 

invoices , you shall be solely responsi ble and liab le for the paym ent of 

an y pre sen t or future sale s, u se, va lue -adde d or sim ila r tax paya ble in 

conn ect ion wi th the sale of p roducts and provision of se rvi ces gove rned 

by these terms and conditions. 

5. TIT LE / INT ELL ECTUAL PROPE RT Y / PRO PRIE TARY 

RI GHTS 

Title to the products and to the work product of any services shall not 

pass to you until Siemens has been paid in full for such products and 

services. Products shall be and remain person al or moveable property, 

notwithstanding their mode of attachment to realty or other property. If 

default is made in any of th e paym ents herein, you agree that Siem ens 

may retain all paymen ts which have been made on account of the 

purchase price as liquidated dam ages, and Siemens shall be free to enter 

the prem ises where the products may be located and remove them as 

Si emens' property, wi thout prejudi ce to S iem ens' right to recover any 

fu rth er e xpense s or da mages Si emens m ay suffe r by rea son of such nonpaym 

ent. 

You acknowledge and agree that Siemens and its licensors own all 

intellect ual p ropert y and propriet ary ri ghts underl yi ng in the products and 

services provided to you. Your use of the intellectual property and 

2. QUOTATIONS 

proprietary rights is authorized only in accordance with the licenses Unless otherwise set out in a Siemens quotation, prices are (i) based on 

provided to you . Unless otherwise stated, upon termination of these terms 

current exchange rates, tariffs and transport costs; (ii) subject to change or 

and conditi ons, for an y reason, su ch au thori za tion w ill c ea se . 

correction by Siemens with or without prior notice to you prior to your 6. WARRANTIES 

acceptance. Quotations not accepted by you in writing within thirty (30) 

A. Product Warranty 

days of the date of the qu otation shall be deemed to b e autom atically 

revoked by Siemens and of no further force and effect. 

Unless otherwise stated, products are covered by a warranty against 

defects in material and workm anship, provided the products and services 

3. D EL IVE RY AND T RANSPORTAT ION / CL AI MS FO R 

are sub jected t o norma l use in a cc orda nce wit h a ll use r manua ls and 

SHORTAGES / INSTALLATION 

specifications provided. The warranty period s hall comm ence on the date 

of delivery of the produ cts and/or services and expire twelve (12) months 

thereafter. For comp onents not suppli ed by S iem ens, the origin al 

manufacturer's warranty shall apply to the extent assignable by Siemens. 

B. Services Warranty 

Unless otherwise stated, services are covered by a warranty that the 

services have been p rovided in a good and workmanlike manner in 

ac corda nce wi th good indust ry practic es and suc h spec ific ati ons agreed to 

by Siem ens an d you in writing. The warranty period shall commence on 

the dat e on whi ch th e servi ces are provided and expire six (6) months 

thereafter. 

C. Remedy for Warranty C laims 

The sole obligation and liability of Siemens and your sole remedy against 

Si emens for claims, incl ud ing negligence, breach of condition, breach of 

wa rra nty, brea ch of contract or for a ny othe r liabili ty in any w ay 

conn ect ed wi th or a rising out of t hese t erms a nd condit ions or t he 

products and services p rovided by Siem ens shall be the warranty 

provided in this section and shall be as follows: (i) for products supplied 

by Siem ens and during the applicable warranty period, your sole rem edy 

shall be, at Siemen s’ option, the repair or replacement of the p roducts or 

the refund of fees paid by you for t he produ cts; and (ii) for any s ervices 

performed by Siemens and during the applicable warranty period , reperformance 

of the services at no additional charge to you or the refund 

of fees paid by you for the services. 

0 - 3


For greater certai nty, defective parts shall be rep laced FC A Siemen s 

facility following your return of the defective parts to Siemens or, if 

designated by Siem ens, to the location where the works are made, properly 

packed and with transportation charges prepaid by you. You are solel y 

responsible for all expenses for dismantling, removal, re-installation and 

freight for any permitted returns. The same obligations and conditions 

ext end t o replacement parts furnished b y S iemens hereunder. Repairs or 

replacement deliveries do not interrupt or prolong the term of the 

warranty. 

D. Exclusions 

The applicable warranties are void if products are (i) altered or repaired 

other than b y persons authorized or approved b y Siemens or (ii) not 

stored , operated, used and maintained in a safe and reasonable manner and 

in accord ance with their specificati ons and any writt en inst ructions from 

the manufact urers. Unl ess oth erwi se st ated, the warranties in thi s Secti on 6 

ext end onl y t o you and not t o third parties. 

EXCEPT AS EXPRESSLY SET OUT IN THESE TERMS AND 

CONDITIONS, SIEMENS DISCLAIMS ANY FUR THER 

CONDITIONS, R EPRESENTATIONS OR WARR ANTIES, WHETHER 

WR ITTEN OR ORAL, EXPR ESS OR IMPLIED, INC LUDING BUT 

NOT LIM ITED TO THE CONDITIONS , REPR ESENTATIONS AND 

WARRANTIES OF MERCHANTABILITY, MERCHANTABLE 

QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AGAINST 

INFRINGEMENT AND THOSE ARISING FROM STATUTE. 

LIAB ILIT IES AND DI SCLAIME R 

A. Exclusion of Certain Dam ages 

IN NO EVENT SHALL SIEMENS BE LIABLE FOR LOSS OF 

PR OFITS , LOS S OF GOODWILL, LOSS OF EXP EC TED S AVINGS 

OR EXPECTED PROFITS, BUSINESS INTERRUPTION, LOST 

BUSINESS, LOST PR OFITS OR INDIREC T, SPEC IAL, 

CONSEQUENTIAL, INCIDENTAL, PUNITIVE OR EXEM PLAR Y 

LOSSES, DAMAGES OR EXPENSES INCURRED OR SUFFERED 

ARISING OUT OF THESE TERMS AND CONDITIONS OR ANY 

PR ODUCTS OR S ERVIC ES PR OVIDED BY SIEM ENS , EVEN IF 

SIEMENS HAS BEEN ADVISED OF OR IS AWARE OF THE 

POS SIBILITY OF SUC H DAMAGES . 

THE LIMITATIONS, EXCLUSIONS AND DISCLAIMERS IN THESE 

TERMS AND CONDITIONS SHALL APPLY IRRESPECTIVE OF THE 

NATURE OF THE CAUSE OF ACTION, DEMAND OR CLAIM, 

INCLUDING BUT NOT LIMITED TO, BREACH OF CONTRACT, 

TORT (INCLUDING NEGLIGENCE), FUNDAMENTAL BREACH, 

FAILUR E OF THE ESEENTIAL PURP OS E OR F ITNESS FOR A 

PARTICULAR P URPOS E OR ANY OTHER LEGAL THEORY AND 

SHALL S UR VIVE TERM INATION OF THESE TERM S AND 

CONDITIONS. THE ALLOC ATIONS OF LIAB ILITY IN THIS 

SEC TION R EP RES ENT THE AGR EED AND BARGAINED F OR 

UNDERSTANDING OF THE PARTIES. 

B. Absolute Limitation of Liability 

Notwithstanding any oth er term and condition set forth herein, the limit of 

Si emens’ l iabi lity to you i n any mann er rel ated to these terms and 

conditions or products or services provided by Siemens hereunder, for any 

and all claims, shall not in the aggregate exceed the price of the goods and 

services set out in the applicable purchas e order . 

0 - 4 

faulty castings or forgings, or the failure of Siemens' suppliers to meet 

th eir deli very comm itments. Your accept ance of t he del ivery of products 

and/or services shall constitute your waiver of all claims for loss or 

damage due to any delay whatsoever. 

3. DEFAULT / TERMINATION 

If you (a) breach any of these terms and conditions; (b) assign, move, 

pledge, sublease, resell or relinquish possession of any products (or the 

real property where the products are located) prior to payment in full; (c) 

cease to do business as a going concern or becoming insolvent; or (d) 

breach the terms of any loan or credit agreement to which the p roducts or 

services relate, then Siemens res erves the right to terminate these terms 

and conditions and the delivery of products and services hereunder. Where 

a cure or remedy of the default is possible, then Siemens will not terminate 

prior to affording you ten (10) business days to remed y such breach. 

If Siemens terminates these terms and conditions, then it shall be entitled, 

at its sole election and in additional to any other remedies available to it at 

law (a) to be pai d in full for all accrued and unpaid payments and charges 

due, as liquidated damages and not as a penalty, (b) to be paid for all 

reasonable costs and expenses including, without limitation, any expenses 

incurred by Siem ens as a result of your defau lt hereunder; (c) to sell, 

transfer or ot herwi se d ispose of t he product s Si emens has deli vered and 

which have not yet been paid for without being liable in any suit or action 

or another proceed ing b y you or any third party, and (d ) to declare these 

terms and condition s term inat ed, wit hou t prej ud ice to Siemens’ rights and 

your obligations then accru ed and remaining unsatisfied. 

4. EXPORT COMPLIANCE 

You shall not export products covered by these terms and conditions from 

Canada or from any other country without first applying for and obtaining 

any and all required authorizations from the Government of Canada or 

from the government of any other country to the extent permitted under 

Canadian law. You shall be responsible for, and require a legally 

enforceable commitment from, any party to whom you sell the products 

that such purchaser will comply with t he above rest ri cti ons. 

Siemens reserves the right to request written confirmation of all 

authorizations procured by you, including certifying that the products will 

be used or consumed in the territory id entified on such form, will be used 

or consumed in the manner described on such form, and will n ot be used, 

consumed, sold nor exported except in accordance with the laws of 

Canada, or the laws of any other country to the extent permitted under 

Canadian law. If you fail to provide Siemens with a requested 

confirmation, or in Siemens’ reasonable judgment you have failed to 

comply with the terms of any declaration, Siemens may refuse to 

commence or continue manufacture or making shipment of the products, 

and may, if shipment has been made, recover the products from the carrier. 

Where specified in the Purchase Order, Siemens will use reasonable 

efforts to provide you with a Certificate of Origin, however in no event 

will Siemens be liable for failing to provide a Certificate of Origin or for 

th e paym ent of an y dut ies , t axes, penalti es, int erest , cost s, legal or ot her 

fees or any other amounts arising as a result of any actions in respect of 

th e products on t he part of th e customs authorities of any country. 

Siemens’ obligation to fulfill these terms and conditions are subject to the 

proviso th at the fulfillment is not preven ted by any impediments arising 

out of national and international foreign trade and customs requirements or 

any embargos or other sanctions. 

C. Ind emnity 

5. PRIVACY and CONFIDENTIALITY 

Use of the products and services provided by Siemens shall be at your sole 

risk and discretion. Other than as set out herein, Siemens shall have no 

liabili ty i n connection wi th su ch use. Further, you shall indemnify and 

Except as required by law or with the express written consent of Siemens, 

you agree to receive and maintain all information received from Siemens 

in confidence, u sing it only in connecti on wi th your us e of the products 

hold harmless, and reimburse Siemens for any claims, damages, losses or 

and services purchased, and use the same degree of care you employ with 

penalties, interest, costs, legal or other fees or any other amounts incurred 

your own confidential information, provided this is no less than a 

by Siemens or that m ay becom e payable by Siemens as a direct or indirect 

reasonable standard of care. You agree not to disclose, authorize the 

result of: (a) your breach of any of these terms and conditions; (b) your 

use of the products or services contrary to the specifications provided by 

disclosure of, or make public any such information and will not use such 

in formation excep t as s et out h erein. 

Si emens; and (c) your failu re to obtain any and all authorizat ions or 

permits that may be required in connect ion wi th the us e or export of the 

products, i nclu di ng those re fe rr e d to in S ec tions 10. 

FORCE MAJEURE 

Unless otherwise stated, you shall not provide Siemens with any personal 

in formation and you shall remove any such informat ion from records and 

documen ts provided to Siem ens. To the extent Siemens provides you with 

person al information, you shall comply with applicable privacy laws, 

Siemens shall not be responsible or liable for any loss or damage incurred 

by you resu lting from causes beyond the reasonable control of Siemens including, wit hou t limi tation, acts of God, war, in vasion, i nsurrecti on, ri ot, 

the order of any ci vil or m ilitary authori ty, fire, flood, weather, act s of the 

el ements, del ays in t ransportation, unavailabi lity of equi pment or 

materials, breakdown, sabotage, lock-outs, strikes or labour disputes, 

includin g i n its use, disclosure, st orage and des truction th ereof. 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Contents Page 

Table of Contents 0 - 5 

Technical Information 

General 1 - 0 

Product Range 1 - 1 

Coats of Paint 1 - 2 

Drive Selection 

Drive Selection 2 -1 

Service Factors 2 - 2 

Formulas / SI units 2 - 5 

Helical Gear Motors and Gear Units 3 -1 

Table of contents 3 -3 

Bevel Helical Gear Motors and Gear Units 4 -1 


Parallel Shaft Gear Motors and Gear Units 5 -1 


Helical Worm Gear Motors and Gear Units 6 -1 


Input Units K., A, P 7 -1 


Documentation 8 -1 


Electrical Section 9 -1 



0 - 5

MOTOX Gear Motors 

1 - 0 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Technical information 

General 


MOTOX geared motors are available in an almost infinite number of combinations for adaptation to a wide range of drive scenarios. 

All geared motors can be supplied with a mounted brake. 

All the usual additional components and variants are also offered. 

Made-to-measure solutions for all kinds of drive technology tasks are achieved with different gearbox types, 

(helical, parallel shaft, bevel helical, helical worm and worm) 

Electronic catalog 

MOTOX Configurator (CD) 

The MOTOX Configurator makes it easy to select the right geared motor, providing you with not only the correct geared motor order 

numbers, but also prices and relevant documentaion. 

Data sheets and dimension drawings can be created for different products. 

Product range 

The printed catalog contains the basic selection of standard MOTOX geared motors. The MOTOX configurator, however, contains 

practically all combinations of MOTOX geared motors which are theoretically possible. It also contains additional sector-specific 

applications , such as: 

• Monorail conveyor drives 

• Extruder geared motors 

• Cooling tower drives 

• Mixer and agitator geared motors 

You can also use the electronic catalog to configure explosionproof ATEX geared motors for zones 1, 2, 21 and 22. 

The MOTOX Configurator can also be accessed online at 

www.siemens.com/gearedmotors 

1 - 1


Modular Gear Motor System 

1 - 2 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Modular Gear Motor System 

Input Units 


1 - 3


Tolerances for functional dimensions 

Dimension D and SA (height from foot base to shaft center) 

1 - 4 

Imperial System [inch] Metric System [mm] 

D Tolerances D Tolerances 

< = 9.84 

+0 

-0.02 

< = 250 

+0 

-0.5 

> 9.84 

+0 

-0.039 

> 250 

+0 

-1 

Shaft Diameters U and FU1 (ref. MG 1 - 4.05) 


over 

Diameter 

to 

Tolerances 

over 

Diameter 

to 

Tolerances ISO Fit 

0.25 1.5 

+0 

-0.0005 

10 18 

+0.012 

+0.001 

1.5 6.5 

+0 

-0.001 

18 30 

+0.015 

+0.002 

k6 

30 55 

+0.018 

+0.002 

50 80 

+0.03 

+0.011 

80 120 

+0.035 

+0.013 

m6 

120 180 

+0.040 

+0.015 

Shaft Diameters UA and UH 


over 

Diameter 

to 

Tolerances 

over 

Diameter 

to 


18 30 

+0.0 

-0.013 

- 

30 

50 

50 

80 

+0.0 

-0.016 

+0.0 

-0.019 

h6 

80 120 

+0.0 

-0.022 

Key width KEY or KEY1 (1st value in w x h x l) 


Square keys Square and rectangular keys 

over 

Width 

to 

Tolerances 

from 

Width 

to 


- 1 1/4 

+0.003 

+0 

3 6 

+0 

-0.03 

6 

10 

10 

18 

+0 

-0.036 

+0 

-0.043 

h9 

18 30 

+0 

-0.052 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Keyway width Y or FY1 (on hollow shafts and couplings) 



over 

Width 

to 

Tolerances 

from 

Width 

to 


- 1 1/4 

6 10 

+0.018 

-0.018 

1 1/4 3 

+0.002 

+0 

10 18 

+0.0215 

-0.0215 

JS9 

3 3 1/2 18 30 

+0.026 

-0.026 

Hollow shaft bore diameters U and FU1 


over 

Diameter 

to 

Tolerances 

over 

Diameter 

to 


- 2 

+0.001 

+0 

18 30 

+0.021 

+0 

2 6.5 

Per AGMA 9002 - A86 

+0.0015 

+0 

30 

50 

80 

50 

80 

120 

+0.025 

+0 

+0.03 

+0 

+0.035 

+0 

H7* 

* Measured with plug gauge. 

Mounting rabbet diameter AK / AK1 

Imperial system [inch] Metric system [mm] 

over 

Diameter 

to 

Tolerances 

over 

Diameter 

to 


2 3.15 

+0.0005 

-0.0003 

50 80 

+0.012 

-0.007 

3.15 

4.75 

4.75 

7 

+0.0005 

-0.0004 

+0.0006 

-0.0004 

80 

120 

120 

180 

+0.013 

-0.009 

+0.014 

-0.011 

j6 

7 9 

+0.0006 

-0.0005 

180 230 

+0.016 

-0.013 

9 12.5 

+0 

-0.001 

230 315 

+0 

-0.032 

12.5 15.75 

+0 

-0.001 

315 400 

+0 

-0.036 

h6 

15.75 20 

+0 

-0.0015 

400 550 

+0 

-0.04 

1 - 5


Tolerance for Customer Shaft Diameter (Load Classification) 

The following table represents the appropriate tolerance that the customer should chose for their keyed shaft-end based on the nature 

of their load. Hollow shafts supplied by SIEMENS are machined with bore tolerances as represented in page 1 - 4. 

*Tolerance for Shaft Diameter U (in INCH) 

1 - 6 

U Load Class 

over to I II III 

0.5 2.000 

2.000 3.000 

0.0 

-0.0007 

0.0 

-0.0008 

3.000 4.000 0.0 

-0.0012 

*Tolerance for Shaft Diameter U (in mm) 

+0.0004 

-0.0003 

+0.0005 

-0.0003 

+0.0005 

-0.0007 

U Load Class 

over to I II III 

- 30 

30 50 

50 80 

80 120 

Load Class. I = Uniform Load or light shocks and J L / J M ≤ 0.3 

Load Class. II = Moderate Shock Load and J L / J M ≤ 3.0 

Load Class. III = Heavy Shock Load and J L / J M ≤ 10 

J L = Load Inertia reflected to motor shaft 

J M = Motor Inertia 

* Dimensions subject to change without notice. 

0.0 

-0.013 

0.0 

-0.016 

0.0 

-0.019 

0.0 

-0.022 

+0.009 

-0.004 

+0.011 

-0.005 

+0.012 

-0.007 

+0.013 

-0.009 

+0.0007 

0.0 

+0.0008 

0.0 

+0.0010 

-0.0002 

+0.015 

+0.002 

+0.018 

+0.002 

+0.021 

+0.002 

+0.025 

+0.003 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Output Shaft Tap Specifications 

Inch Shaft (Dimensions are in inch) 


Shaft Diameter U D1 D2 D3 D4 T1 T2 T3 T4 

over to 

0 13/16 1/4 - 20 0.2086 0.256 0.374 0.630 0.787 0.197 0.102 

7/8 15/16 5/16 - 18 0.2638 0.327 0.472 0.966 1.102 0.236 0.126 

1 1 1/8 3/8 - 16 0.3189 0.386 0.571 0.966 1.102 0.285 0.169 

11/4 1 3/8 1/2 - 13 0.4330 0.531 0.768 1.122 1.417 0.374 0.205 

11/2 1 7/8 5/8 - 11 0.5433 0.654 0.984 1.378 1.772 0.472 0.283 

2 3 1/4 3/4 - 10 0.6693 0.795 1.181 1.614 2.047 0.591 0.335 

3 3/8 5 1 - 8 0.8858 1.016 1.457 2.126 2.756 0.709 0.394 

5 1/6 and over 1 1/8 - 7 0.9844 1.181 1.638 2.441 3.307 0.787 0.394 

Metric Shaft (Dimensions are in mm) 

Shaft Diameter U D1 D2 D3 D4 R i T1 T2 T3 T4 

over to 

10 13 M4 3.3 4.3 6.7 5.0 10.0 14.0 3.2 2.1 

13 16 M5 4.2 5.3 8.1 6.3 12.5 17.0 4.0 2.4 

16 21 M6 5.0 6.4 9.6 8.0 16.0 21.0 5.0 2.8 

21 24 M8 6.8 8.4 12.2 10.0 19.0 25.0 6.0 3.3 

24 30 M10 8.5 10.5 14.9 16.0 22.0 30.0 7.5 3.8 

30 38 M12 10.2 13.0 18.1 20.0 28.0 37.0 9.5 4.4 

38 50 M16 14.0 17.0 23.0 25.0 36.0 45.0 12.0 5.2 

50 85 M20 17.5 21.0 28.4 31.5 42.0 53.0 15.0 6.4 

85 130 M24 21.0 25.0 34.2 40.0 50.0 63.0 18.0 8.0 

130 and over M30 26.5 31.0 42.6 50.0 63.0 85.0 20.0 10.0 

Dimensions subject to change without notice. 

Metric Shaft Inch Shaft 

1 - 7


we 

Surface treatment 

We offer 5 high-quality paint systems in different hues to protect drives against corrosion and external influences. 

Our corrosion protection range is available in accordance with the corrosion categories in the DIN EN ISO 12944-2 Standard. 

Geared motors of size 38 and above are painted in RAL 5015 (sky blue) as standard according to corrosion category C1. This ensures 

that they are protected against corrosion for intallation in interior areas. Gearboxes of size 18 and 28 with an aluminum housing are 

supplied unpainted as standard. 

For transport, the bare parts are coated with an anti-corrosion paint which will last for a limited amount of time. 

Corrosion catagory Order code Paint system Hue Description 

Surface protection for normal environment stress 

C1 L02 

Surface protection for minimal environment stress 

C2 L03 

Surface protection for medium environment stress 

C3 L04 

Surface protection for high environment stress 

C4 L20 

1 - 8 

1-component 

water-based coating 

2-component 

poyurethane primer 

2-component 

polyurethane top 

coatl 

2-component 


2-component 


coatl 

2-component 

epoxy zinc 


2-component 


coatl 

Surface protection for extremely high environment stress 

C5 L05 

2-component 

epoxy zinc 


2-component 

epoxy iron mica 

2-component 


coat 

Standard: 5015 

On request: 

RAL 1003, 1007, 1012, 

1018, 1023,2000, 2004, 

3000, 5007, 5009, 5010, 

5012, 6011, 6018, 7001, 

7011, 7016, 7030, 7031, 

7032, 7035, 9005, 9006, 

9010 

Standard: RAL 7031 

On request: 

RAL 1003, 1012, 1018, 

1023, 2004, 3000, 5002, 

5007, 5009, 5010, 5012, 

5015, 6011, 6018, 7000, 

7001, 7011, 7030, 7032, 

7035, 9005, 9006, 9010, 

9011, 9016 


On request 

RAL 1003, 1012, 1018, 

1023, 2004, 3000, 5002, 

5007, 5009, 5010, 5012, 

5015, 6011, 6018, 7000, 

7001, 7011, 7016, 7030, 

7031, 7032, 7035, 9005, 

9006, 9010, 9011, 9016 


On request: 

RAL 1003, 1012, 1018, 

1023, 2004, 3000, 5002, 

5007, 5009, 5010, 5012, 

5015, 6011, 6018, 7000, 

7001, 7011, 7016, 7030, 

7031, 7032, 7035, 9005, 

9006, 9010, 9011, 9016 

StandardL RAL 7031 

On request: 

RAL 1003, 1012, 1018, 

1023, 2004, 3000, 5002, 

5007, 5009, 5010, 5012, 

5015, 6011, 6018, 7000, 

7001, 7011, 7016, 7030, 

7031, 7032, 7035, 9005, 

9006, 9010, 9011, 9016 

• Indoor installation 

• Heated buildings with neutral atmospheres 

• Resistance to greases and some resistance to 

mineral oils, aliphatic solvents 

• Standard paint finish 

• Indoor and outdoor installation 

• Unheated buildings with condensation, 

production areas with low humidity, e.g 

warehouses and sports facilities 

• Atmospheres with little contamination, mostly 

rural areas 

• Resistant to greases, mineral oils and sulfuric 

acid (10%), caustic soda (10%) and some 

resistance to aliphatic solvents 


• Production areas with high levels of humidity and 

some air pollution, e.g plants for food 

manufacturing, dairies, laundries and breweries 

• Urban and industrial atmospheres, moderate 

contamination from sulfur dioxide, coastal areas 

with low salt levels 

• Resistant to greases, mineral oils, aliphatic 

solvents, sulfuric acid (10%), caustic (10%) 


• Chemical plants, swimming pools, wastewater 

treatment plants, electroplating shops, and 

boathouses above seawater 

• Industrial areas and coastal areas with moderate 

salt levels 

• Resistant to greases, mineral oils, aliphatic 

solvents, sulfuric acid (10%), caustic soda (10%) 


• Buildings and areas with almost constant 

codensation and with heavy pollution, e.g malt 

factories and aseptic areas 

• Industrial areas with high humidity and 

aggressive atmosphere, coastal areas and 

offshore environments with high salt levels 

• Resistant to greases, mineral oil, aliphatic 

solvents, sulfuric acid (10%), caustic soda (10%) 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Surface treatment (continued) 


Corrosion catagory Order code Paint system Hue Description 

Primed according to corrosion category C2 G 

C2 G L01 

Primed according to corrosion category C4 G 

C4 G L09 

Unpainted 

C1 G L00 

Special pre-treatment before painting 

L19 

2-component 


2-component 

epoxy zinc 

phosphate primer 

• 2-component polyurethane paint, 

• 2-component epoxide paint and acid hardening 

paint 

• 2-component acrylic paint 

• 2-component polyurethane paint, 

• 2-component epoxide paint and acid hardening 

paint 

• 2-component acrylic paint 

• Plastic paint, synthetic resin paint, oil paint, 2component 

polyurethane paint, 2component 

epoxide paint 

• For special requirements for the surface 

treatment and priming of drives, especially as a 

primer and intermediate coating for surface 

protection under severe environmental stress 

*Note: 

Information about repaintability is not a guarantee of the quality of the paint product purchased from your supplier. Only the paint manufacturer is liable for the quality and 

compatibility. 

Order codes for RAL colors: 

5015 Sky blue (standard) L50 

7011 Steel grey L51 

7031 Blue grey L53 

7035 Light grey L54 

7030 Stone grey L55 

Increased protection against humidity and tropical 

climate 

Increased protection against humidity and tropical climate can 

be supplied as an option for (geared) motors of frame size 71 

to 200L. This version is designed for humidity in the range from 

30 to 60 g water per m³ air depending on the temperature. This 

version comprises a surface treatment for corosion category 

C2 (L03), increased humidity and acid protection for the 

winding (N54), motor-internal corrosion protection (N41) and 

temperature class (155) F. 

Increased protection against acid and alkali 

Increased protection against acid and alkali can be supplied as 

an option for (geared) motors of frame sizes 71 to 200L. This 

version is suitable for city and industrial atmospheres with moderate 

pollution with sulfur dioxide, coastal areas with low salt 

levels and aggressive atmospheres with up to 1% concentrations 

of acids or alkalis. This version comprises a surface treatment 

for corrosion category C3 (L04), increased humidity and 

acid protection for the winding (N54), motor-internal corrosion 

protection (N41), temperature class (155) F and pressure ventilation 

in the gearbox (G45) 

The colors listed above can be specified using order code Y80 and 

RAL color code in plain text 

Example: Reseda green (RAL6011) 

Order code: Y80 

Plain Text Y80*RAL @60111 

Combination with increased acid and alkali protection is not 

possible. 

If function expansions (brakes, backstops, encoder systems) are 

required on the motor, consultation with the manufacturer is necessary 

beforehand. 

Order code: 

Increased protection against humidity and tropical climate N43 

Combination with increased humidity and tropical climate protection 

is not possible. 

If function expansions (brakes, backstops, encoder systems) are 

required on the motor, consultation with the manufacturer is necessary 

beforehand. 

Order code: 

Increased protection against acid and alkali N44 

1 - 9


2 - 0 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Drive selection 


Operating conditions decide the selection of drive. These conditions are taken into account by service factor (SF). 

For normal operating conditions with uniform loadings, low masses to be accelerated and few starts, this service factor (SF) = 1. 

For different operating conditions see table “Service factor”. This factor decides the speed reducer size, not, however, the drive motor 

rating. 

With known motor rating and output speed enter the selection tables list and choose a speed reducer type, whose permissible service 

factor SF o ≤ SF (please see next page). 

Siemens personnel are available to advise on drive selection for special operating conditions, e.g. reversing, short time or intermittent 

operation, abnormal temperature, counter-current braking, high or rotating radial forces onto the output shaft etc. upon request. 

For that purpose we require the following data: 

1. Type of driven machine 

2. Daily operating period 

3. Required power [hp] or torque [lb.in.] 

4. Nominal speed of gear unit [r.p.m.] or ratio i 

5. Voltage [V] and frequency [Hz] 

6. Starting (direct on line or star/delta) 

7. Type of operation, starting cycles frequency, frequency inverter operation 

8. Moments of inertia J ext [lb.in. 2 ] of driven machine referred to nominal output speed of gear unit 

9. Connection to input or output shaft (direct, coupling, belt drive, chain drive, gears) 

10. Overhung loads F R [lb] on shafts and their direction with distance of load application point from shaft shoulder, thrust forces F A [N] 

11. Ambient temperature [°F] 

12. Mounting position 

13. Desired braking torque [lb.in.] 

If motors must conform to foreign standards, these standards should be specified exactly. 

2 - 1


Service Factor 

Factor SF 1 

2 - 2 

SF 0 = SF 1 ? SF 2 ? SF 3 

SF 0 ≤ SF 

where, 

SF 0 = Minimum service factor 

SF = Service factor (see gear motors selection) 

Daily operation 4 hours 8 hours 16 hours 24 hours 

Starts / hour 200 200 200 200 

Load 

Classification 

I 0.8 0.9 1 0.9 1 1.1 1 1.1 1.2 1.2 1.3 1.5 

II 1 1.1 1.3 1.1 1.2 1.3 1.2 1.4 1.5 1.4 1.5 1.6 

III 1.3 1.4 1.5 1.4 1.5 1.6 1.5 1.6 1.7 1.6 1.7 1.8 

For daily operating periods up to 4 hours and if flexible coupling or belt drives are being used, lower service factors can be chosen. 

Load Type Driven Machine 

I 

Light Shocks 

II 

Moderate Shocks 

III 

Heavy Shocks 

Mass acceleration factor ≤ 0.3 : 

Generators, belt conveyors, platform conveyors, screw conveyors, light hoists, electric hoists, auxiliary 

machine tool drives, turbo blowers, turbo compressors, agitators and mixers for light uniform density materials. 

Mass acceleration factor ≤ 3 : 

Main machine tool drives, hoists, slewing gears, cranes, induced draught fans, mixer and agitator for materials 

with variable density, muticylinder piston pumps, metering pumps. 

Mass acceleration factor ≤ 10 : 

Punch presses, shears, banbury mixers, rolling mill and foundry drivers, bucket dredger, heavy centrifugal 

drives, heavy metering pumps, rotary drilling equipment, briquet presses, pug mills. 

For very heavy shock load applications such as reversing operation, please contact your sales branch. 

Mass Acceleration Factor = 

all exterior moments of inertia 

moment of inertia of drive motor 

[ lb-ft 2 ] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Exterior moments of inertia are defined as the “load inertia” referring to the motor speed. The “load inertia” must be provided by the 

driven machine manufacturer. For assistance contact Siemens or see the following formula. 

1 

0.5 

Exterior Moment of Inertia (Rotating) = Load Inertia x 

Exterior Moment of Inertia (Linear) = W x 

where, 

W = Weight (lb) 

V = Linear Velocity (Ft./Min.) 

N = Motor RPM 

Factor SF 2 (for short term operation) Factor SF 3 (for ambient temperature) 

0 50 100 ED [%] 

ϑ Um = Ambient temperature 

Losses by splashing 

ED = Operating cycle / h 

Load RPM 

Motor RPM 

* For temperature below 20°C contact SIEMENS 

For certain mounting position the first stage gears dip completely into the oil. When using bigger gear boxes with high input speed there 

will be losses by splashing which have to be taken into consideration. 

You should use the mounting positions B3.. / B5 / B5-01 / H01 for gear box types DZ., F., and K. to minimize losses. 

2.0 

1.9 

1.8 

1.7 

1.6 

1.5 

1.4 

1.3 

1.2 

1.1 

1.0 

0.9 

0.8 

V 

6.28 N 

0 10 20 30 40 50 60 ϑUm [°C] 

2 

2 

2 - 3


AGMA Application Standard 

2 - 4 

Hrs. per 

Hrs. per 

Hrs. per 

Hrs. per 

Day 

Day 

Day 

Day 

Application 8-10 24 Application 8-10 24 Application 8-10 24 Application 8-10 24 

AGITATORS ELEVATORS MACHINE TOOLS Reciprocating 

Pure Liquids I II Bucket-Uniform Load I II Bending Roll -- II Single Acting 

Liquids and Solids II II Bucket-Heavy Load II II Notching Press-Belt Driven I II 3 or more Cylinders II II 

Liquids-Variable Density II II Bucket-Continuous I II Plate Planer III III Double Acting 

BLOWERS Centrifugal-Discharge I II Punch Press-Gear Driven III III 2 or more Cylinders II II 

Centrifugal I II Escalators I I Tapping Machines -- III ++Single Acting 

Lobe II II Freight II II Other Machine Tools 1 or 2 Cylinders ++ ++ 

Vane I II Gravity Discharge I I Main Drives II II ++Double Acting 

BREWING & DESTILLING Man Lifts -- -- Auxiliary Drives I II Single-Cylinder ++ ++ 

Bottling Machinery I II ++Passenger ++ ++ METAL MILLS Rotary-Gear Type I II 

Brew Kettles-Continuous Duty -- II Service Hand Lift III -- Draw-Bench-Carriage III III Lobe,Vane I II 

Cookers-Continuous Duty -- II FANS Draw-Bench-Main Drive II III RUBBER INDUSTRY 

Mash Tubs-Continuous Duty -- II Centrifugal I II Forming Machines III III Mixer III III 

Scale Hopper 

Frequent Starts II II Cooling Towers ++Pinch Dryer & Scubber *Rubber Calender II II 

CAN FILLING MACHINES I II Induced Draft II II Rolls Reversing ++ ++ *Rubber Mill(2 or more) II II 

CAN KNIVES II II ++Forced Draft ++ ++ *Sitters II II *Sheeter II II 

CAR DUMPERS III -- Induced Draft II II Table Conveyors -- -- Tire Building Machines II II 

CAR PULLERS II -- Large (Mine, etc..) II II Non-Reversing II II Tire & Tube Press Openers I I 

CLARIFIERS I II Large Industrial I II *Reversing -- -- Tubers and Strainers II II 

Wire Drawing & Flattening SEWAGE DISPOSAL 

CLASSIFIERS II II Light (Small Diameter) I II Machine II II EQUIPMENT 

CLAY WORKING 

MACHINERY FEEDERS Wire Winding Machine -- II Bare Screens -- II 

Brick Press III III Apron II II MILLS ROTARY TYPE Chemical Feeders I II 

Briquette Machine III III Belt II II *Ball II II Collectors Circuline or Straightline I II 

Clay Working Machinery II II Disc I II *Cement Kilns -- II Dewatering Screens II II 

Pug Mill II II Reciprocating III III Dryers & Coolers II II Grit Collectors I II 

COMPRESSORS Screw II II Kilns II II Scum Breakers II II 

Centrifugal I II FOOD INDUSTRY *Pebble II II Slow or Rapid Mixers II II 

Lobe II II Beet Slicer II II Rod III III Sludge Collectors I II 

Reciprocating Cereal Cooker I II Tumbling Barrels III III Thickeners II II 

Multi-Cylinder II II Dough Mixer II II MIXERS Vacuum Filters II II 

Single-Cylinder III III Meat Grinders II II Concrete-Continuous II II SCREENS 

CONVEYORS-UNIFORMLY GENERATORS- 

LOADED OR FED (Not Welding) I II Concrete-Intermittent I -- Air Washing I II 

Apron I II HAMMER MILLS III III Constant Density I II Rotary-Stone or Gravel II II 

Assembly I II LAUNDRY WASHERS Variable Density II II Travelling Water Intake I II 

Belt I II Reversing II II OIL INDUSTRY SLAB PUSHERS II II 

Bucket I II LAUNDRY TUMBLERS II II Chillers II II STEERING GEAR II II 

Chain I II LINE SHAFTS ++Oil Well Pumping ++ ++ STOKERS I II 

Flight I II Driving Processing Equipment II II Paraffin Filter Press II II TEXTILE INDUSTRY 

Oven I II Other Line Shafts I II Rotary Kilns II II Batchers II II 

Screw I II LUMBER INDUSTRY PAPER MILLS Calenders II II 

CONVEYORS-HEAVY DUTY Barkers-Hydraulic-Mechanical II II Agitators (Mixes) II II *Card Machines II II 

Cloth Finishing Machines 

( washers, pads , 

tenters, dryers , 

Apron II II Burner Conveyor II II Barker Auxiliaries Hydraulic -- III calenders, etc.) II II 

Assembly II II Chain Saw and Drag Saw III III Barker Mechanical -- III Dry Cans II II 

Belt II II Chain Transfer III III Barking Drum II II Dyeing Machinery II II 

Bucket II II Craneway Transfer III III *Beater & Pulpers -- II ++Knitting Machines (Looms, etc.)++ ++ 

Chain II II De-Barking Drum III III Bleacher I II Looms II II 

Flight II II Edger Feed II II *Calenders -- II Mangles II II 

++Live Roll ++ ++ Gang Feed II II Calenders-Super -- III Nappers II II 

Converting Machines, Excep. 

Oven II II Green Chain II II Cutters, Platers -- III ++Range Drivers ++ ++ 

Reciprocating III III Line Rolls III III Conveyors -- II Soapers II II 

Screw II II Log Deck III III *Coach -- II Spinners II II 

Shaker III III Log-Haul-Incline III III Cutters, Platers -- III Tenter Frames II II 

CRANES & HOISTS Log-Haul-Well Type III III Cylinders -- II Winders (other than Batchers) II II 

Yard Preparatory Machines (Cards 

Main Hoists Log Turning Device III III *Dryers -- II Spiners, Slashers, etc.) II II 

Heavy Duty III III Main Log Conveyor III III Felt Stretcher -- II WINDLASS II II 

Medium Duty II II Off Bearing Rolls II II Felt Whipper -- III 

Reversing II II Planer Feed Chains II II Jordans -- III 

Skip Hoists II II Planer Floor Chains II II Log Haul -- III 

Travel Motion II II Planer Tilting Hoist II II *Presses -- II 

Re-Saw Merry-Go-Round 

Trolley Motion II II Conveyor II II Pulp Machines -- II 

CRUSHERS Roll Cases III III Reel -- II 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

International SI-Units 


Description Symbol Unit Symbol SI-Units Denomination 

Length (length of path) l m Meter 

Area A m 2 

Volume V m 3 

Angle in one plane α, β, γ rad Radian 

Angle of rotation φ 

Time t s Second 

Cycle length T s 

Frequency f Hz Hertz 

Rotational speed n rpm 

Velocity v m/s 

Acceleration 

Gravitational Acceleration 

a 

g 

m/s 2 

g=9.81 m/s 2 

Angular velocity ω rad/s 

Angular acceleration α rad/s 2 

Mass m kg Kilogram 

Density g kg/dm 3 

Force 

Weight 

Pressure 

Mechanical stress 

Work 

Energy 

Amount of Heat 

Torque 

Bending moment 

F 

G 

p 

σ 

W 

W 

Q 

T 

M 

N Newton 

Pa 

N/m2 N/mm 2 

J 

J 

J 

Nm 

Nm 

Pascal 

Joule 

Newton meter 

Output power P W Watt 

Moment of inertia J kgm 2 m.r2 Dynamical viscosity η Pa · s 

Kinematical viscosity υ m2 /s 

Electrical current I A Ampere 

Voltage U V Volt 

Electrical resistance R Ω Ohm 

Conductance G S Siemens 

Capacitance C F Farad 

Quantity of electricity 

Charge 

Q C Coulomb 

Self inductance L H Henry 

Magnetic flux density 

Magnetic induction 

B T Tefla 

Magnetic field strength H A/m 

Magnetical flux φ Wb Weber 

Temperature T(ϑ) K(°C) Kelvin 

2 - 5


Conversion table for frequently used Imperial-Metric units 

2 - 6 

DISTANCE in ft yd mm m 

1 in = 1 0.0833 0.0278 25.4 0.0254 

1 ft = 12 1 0.3333 304.8 0.3048 

1 yd = 36 3 1 914 0.9144 

1 mm = 0.039 3.281E-03 1.094E-03 1 0.001 

1 m = 39.37 3.281 1.094 1000 1 

AREA sq in sq ft sq yd cm 2 

m 2 

1 sq in = 1 6.944E-03 7.716E-04 6.4516 6.452E-04 

1 sq ft = 144 1 0.1111 929 9.290E-02 

1 sq yd = 1296 9 1 8361 8.361E-01 

1 cm2 = 0.155 1.076E-03 1.196E-04 1 0.0001 

1 m 2 = 1550 10.764 1.196 10000 1 

VOLUME cu in pint US-Gallon dm 3 

m 3 

1 cu in = 1 3.463E-02 4.330E-03 0.016 1.639E-05 

1 pint = 28.87 1 0.1250 4.732E-01 4.732E-04 

1 US-Gallon = 230.9 8 1 3.785 3.785E-03 

1 l = 1 dm3 = 61.01 2.113 2.642E-01 1 0.001 

1 m 3 = 61013 2113 264,2 1000 1 

MASS 1 oz 1 lb 1 g 1 kg 

1 oz = 1 6.250E-02 28.35 0.028 

1 lb = 16 1 453.6 0.454 

1 g = 0.035 0,0022 1 0.001 

1 kg = 35.27 2.205 1000 1 

PRESSURE bar Pa atm psi 

1 bar = 1 1.0E+05 0.99 14.50 

1 Pa = 1 N/m 2 = 1.0E-05 1 9.869E-06 1.45E-04 

1 atm = 1.013 1.013E+05 1 14.70 

1 psi = 1 lb/sq in = 0.069 6895 0.068 1 

TORQUE lb in lb ft kpm Nm 

1 lb in = 1 8.333E-02 0.01 0.113 

1 lb ft = 12 1 0.1 1.356 

1 kpm = 86.77 7.231 1 9.807 

1 Nm = 8.848 0.737 0.102 1 

FORCE lbf kp N 

1 lbf = 1 0.454 4.448 

1 kp = 2.205 1 9.807 

1 N = 0.225 0.102 1 

POWER hp PS kW 

1 hp = 1 1.014 0.746 

1 PS = 0.986 1 0.735 

1 kW = 1.341 1.360 1 

TEMPERATURE °F °C 

1 °F = 1 0.555 x (°F-32) 

1 °C = 1.8 x °C + 32 1 

Notice: The information contained on this page were compiled with the utmost care. 

However, SIEMENS does not assume liability for its accuracy or contents. 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Helical Gear Motors and Gear Units 


3 - 1


3 - 2 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


3 - 3 

Table of Contents Page 


Technical Information 3 - 4 

Type Designations 3 - 6 

Existing overhung load 3 - 7 

Permissible Radial Loads 3 - 8 

Performance Data 3 - 11 

Torque table for type 3 - 71 

Quadrilip seals, Breather element 3 - 94 

Pinhole 3 - 95 

Dimension Sheets - Overview 3 - 96 

Optional Output Shafts 3 - 202 

Mounting Position 3 - 210 

Lubrication, Oil Quantities 3 - 219

Helical Gear Units 

Technical description 


MOTOX helical gear units are part of the MOTOX modular system which essentially comprises helical, helical bevel, parallel shaft, 

helical worm gear units or mechanical variable speed drives. With three or single phase AC motors with or without brake, all imaginable 

drive combinations up to electronic variable speed drives are possible. 

MOTOX helical gear units are designed for continuous operation. 

The housings made of grey cast iron or aluminium are developed in 3D-CAD and optimized for rigid and anti-vibration structure. 

Lubricant loss and entry of dust and water are effectively prevented by high quality radial shaft seal. 

All gears are hobbed, case hardened and profile ground or honed. Additionally, gear teeth are profile corrected and crowned for 

optimum performance. 

Helical gearing provides for optimal quiet operation. 

Helical gears are in compliance with ASME / AGMA Standard 2001-B88. 

Helical gears have a hardness of 58-62 R c. 

The maximum permissible radial and axial forces at the input and output shafts are to be considered. 

Design Variations 

The standard unit is available in foot, face or flange mounted versions for use in all mounting positions. 

Integrally mounted C-Face adapters, either in the clamp collar style (K5TC) or the elastic coupling style (KTC), are available for 

NEMA motors. 

Electro-magnetic brakes, backstops, speed monitors and numerous integral options are available. 

Output power, torque and speed 

The horsepower, output torque and speeds shown in the selection tables are based on mounting position B3 (or a similar position), 

standard features, ambient temperature of 20°C (68°F) and standard lubricant. 

The actual output speeds and torques may vary slightly from the figures in this catalogue due to motor variations, supply voltage or 

reflected load. 

Efficiency 

The efficiency of helical gearing is determined by gearing and bearing friction as well as splash losses. It ranges from approximately 

94% for 3 stage units to 98% for single stage units. 

3 - 4 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Standards 

The important dimensions correspond to the DIN standards, namely: 

Shaft heights DIN 747 

Cylindrical shaft ends DIN 748/1 

Mounting flanges DIN 42948 

Coaxial concentricity and runout of shaft ends and of flange surface DIN 42955 

Parallel keys DIN 6885/1 

Second motor shaft extension DIN 748/3 

Centre holes in shaft ends DIN 332/2 

Direction of rotation of the gear motors 

Three-phase a.c. motors are arranged so that the motor shaft turns to the right (IEC 60034-8). 

The direction of rotation of the gear unit output shaft may be reversed by swapping over two external wires at the motor. For singlephase 

a.c. geared motors and for geared motors fitted with backstop, the required direction of rotation must be stated when the order 

is placed. 

The Weights [lbs / kg] shown in the Dimension Sheets are average values and do not include Oil. 

For Oil Quantities according to the operational mounting positions, see chapter “Lubrication, Oil Quantities”. 

Specific Weights of Oils: 

Mineral Oil (CLP) = 0.9 kg/l (2 lbs/l) 

Synthetic Oil (PGLP) = 1.05 kg/l (2.3 lbs/l) 

3 - 5


Type Designations 

Gear Units 

Type 

Design 

Size 

Type of ancillary gear unit 

Size of ancillary gear unit 

Input unit 

(for motor frame size) 

Type of gear unit 

(-) Helical Gear Unit 

Stages 

E 1-stage 

Z 2-stages 

D 3-stages 

Design 

Shaft 

(-) Solid shaft 

Fixing 

3 - 6 

Example: D F 108 - Z 38 - K5TC (56) 

(-) Foot-mounted 

F Flange-mounted (A-type) 

Z Housing flange (C-type) 

R Agitator flange 

Connection 

(-) Parallel key 



Stages 

Z 2-stages 

D 3-stages 

Type of input unit 

K4 Extended housing with shank assembly for IEC flange 

mounted motors 

K2 Extended housing with elastic coupling for IEC flange 

mounted motor 

A Input flange with free input shaft (metric) 

P Design piggy back for IEC motors 

K5TC Adapter with clamp collar for NEMA C-face motors 

KTC Adapter 3 Piece Coupled for NEMA C-face mounted 

motors 

A5 Input flange with free input shaft (imperial) 

P5 Design piggy back for NEMA motors 

Motors 

Type 

Size 

Number of poles 

Additional characteristics 

Brake type / Brake design 

Motor type 

LA, LG 

Three-phase AC motors, built-in 

Example: LA 100L 4/2 R - L16 NH 

LAI, LGI 

Three-phase AC motors, with IEC flange 

Special features 

E High efficiency 

F Forced ventilation 

I High inertia fan 

W Canopy 

IN Incremental encoder 

IR Resolver 

IA Absolute encoder 

D Handwheel 

Mounted unit 

L, KFB 

Spring-operated single disk brake, DC excited 

16 Size = Nominal braking torque 

../10 Adjusted braking torque 

N Standard version 

G Enclosed version 

H Manual brake release 

HA Manual brake release with locking mechanism 

M Microswitch 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Existing overhung loads 

For the calculation of the existing radial load the type of drive element has to be taken into consideration. 

For different drive elements the following factor C have to be considered. 

Drive element Factor C Remarks 

Gears 1.15 < 17 teeth 

Chain sprockets 1.40 < 13 teeth 



V-Belt 2.0 Pretension 

Flat belt 2.50 Pretension 

Toothed belt 1.50 Pretension 

Agitator / Mixer 2.0 rotating radial force 

F exist = existing radial load [Ibf] 

T 2 

d 0 

F exist 

= 

T2 ⋅ 2 

------------- 

d 0 

= existing torque [Ib-in] 

= average diameter of the drive element [in] 

C = Factor for the drive element type [-] 

Fexist C ≤⋅ 

Fxperm 3 - 7


Permissible overhung loads for helical gear units at Service Factor 1.0 

Calculation based on bearing life 

Calculation based on mechanical strength 

3 - 8 

F xperm2 

F xperm1 

øU 

F xperm F Rperm 

x V x V/2 0 

valid for x V/2 

for x < V/2: F xperm = F Rperm 

The dimension x is the distance from the shaft shoulder to the point where the load (F xperm) is applied. 

The lower value F xperm of both calculation results is the permissible overhung load. Higher overhung loads are permitted under certain 

load conditions. If values on tables are not sufficient for the requirement, please consult SIEMENS, stating the following criteria on 

overhung load: 

- value 

- direction / angle of force 

- location (x) on shaft 

- direction of rotation of shaft 

Note: 

The listed radial forces refer to worst case setup. All setups can be calculated with the MOTOX Electronic Configurator (CD) 

For high or rotating radial load, mixer and agitator drives have to be used. 

F 

F xperm 

0 

y 

= FRperm ⋅ ------------ Ibf][ 

z+ x 

a ⋅ 1000 

= -------------------- Ibf][ 

b + x 

> = 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Standard Bearings 

Typ(e) 

y 

[in.] 

z 

[in.] 

a 

[lb in] 

b 

[in.] 

U 

[in.] 

V 

[in.] 

E.38 4.13 3.35 1.23 0.94 3/4 1.57 

E.48 4.49 3.50 1.69 0.94 1 1.97 

E.68 6.10 4.92 3.21 1.16 1 1/4 2.36 

E.88 6.73 5.16 5.64 1.28 1 5/8 3.15 

E.108 7.64 5.67 8.62 1.44 2 1/8 3.94 

E.128 8.98 6.61 14.15 1.44 2 3/8 4.72 

E.148 10.24 7.48 20.25 1.83 2 3/4 5.51 

Heavy Duty Bearings 

Typ(e) 

y 

[in.] 

z 

[in.] 

a 

[lb in] 

b 

[in.] 

U 

[in.] 

V 

[in.] 

E.38 4.13 3.35 1.23 0.94 3/4 1.57 

E.48 4.49 3.50 1.69 0.94 1 1.97 

E.68 6.10 4.92 3.21 1.16 1 1/4 2.36 

E.88 6.73 5.16 5.64 1.28 1 5/8 3.15 

E.108 7.64 5.67 8.62 1.44 2 1/8 3.94 

E.128 8.98 6.61 14.15 1.44 2 3/8 4.72 

E.148 10.24 7.48 20.25 1.83 2 3/4 5.51 

∗ Direction of rotation with view on output shaft 

cw = clockwise 

ccw = counter clockwise 

∗ 

≤ 160 

[rpm] 


F Rperm in lbf for x = V/2 for output speeds n 2 in rpm 

≤ 250 

[rpm] 

≤ 400 

[rpm] 

≤ 500 

[rpm] 

≤ 625 

[rpm] 

≤ 780 

[rpm] 

≤ 980 

[rpm] 

≤ 1200 

[rpm] 

ccw 

677 324 434 385 428 486 479 

- 

cw 713 457 488 353 367 380 403 

ccw 

632 441 101 160 232 396 385 

875 

cw 785 628 212 151 176 239 295 

ccw 

1118 599 536 428 484 486 515 

1372 

cw 1372 619 326 63 176 221 293 

ccw 

1640 1280 1172 1049 905 891 871 

1975 

cw 1739 1265 1069 857 518 585 666 

ccw 

2189 1746 1373 1150 920 965 - 

2529 

cw 1636 1130 700 513 250 437 - 

ccw 

3238 2511 2302 2106 2027 1917 - 

3728 

cw 3404 2320 1908 1438 1611 1690 - 

ccw 

3839 3227 2912 2486 2480 2417 2288 

4417 

cw 3695 2644 2201 1539 1708 1829 1895 

∗ 

≤ 160 

[rpm] 


≤ 250 

[rpm] 

≤ 400 

[rpm] 

≤ 500 

[rpm] 

≤ 625 

[rpm] 

≤ 780 

[rpm] 

≤ 980 

[rpm] 

≤ 1200 

[rpm] 

ccw - 587 295 387 347 380 446 533 

cw - 635 416 488 459 486 536 603 

ccw 783 567 407 122 171 232 378 500 

cw 853 700 587 387 425 470 572 547 

ccw 1231 956 540 491 412 605 736 880 

cw 1364 1166 875 846 797 934 1031 1127 

ccw 1975 1975 1589 1433 1265 1033 1026 1019 

cw 1975 1975 1726 1573 1395 1188 1163 1136 

ccw 2529 2081 1910 1730 1512 1321 1303 - 

cw 2529 2459 2212 1917 1703 1503 1451 - 

ccw 3728 3728 3292 2972 2666 2592 2477 - 

cw 3728 3728 3508 3200 2914 2790 2633 - 

ccw 4417 3989 3580 3398 2891 2846 2795 2660 

cw 4417 4417 4066 3661 3179 3105 3015 2840 

3 - 9



Typ(e) y 

[in.] 

3 - 10 

z 

[in.] 

a 

[lb in] 

b 

[in.] 

U 

[in.] 

V 

[in.] 

D./Z.18 3.58 2.80 0.45 0.47 3/4 1.57 

D./Z.F18 3.90 3.11 0.51 0.79 3/4 1.57 

D./Z.28 4.09 3.11 1.15 0.47 1 1.97 

D./Z.F28 4.33 3.35 1.15 0.71 1 1.97 

D./Z.38 4.17 3.19 1.50 0 1 1.97 

D./Z.48 5.51 4.13 2.88 0.75 1 3/8 2.76 

D./Z.68 6.69 5.10 5.00 0 1 5/8 3.15 

D./Z.88 8.62 6.26 14.47 0.83 2 1/8 3.94 

D./Z.108 9.80 7.44 18.71 0 2 3/8 4.72 

D./Z.128 12.03 9.27 27.63 0 2 7/8 5.51 

D./Z.148 13.43 10.08 56.32 0 3 5/8 6.69 

D./Z.168 16.56 12.42 103.23 1.18 4 3/8 8.27 

D./Z.188 17.54 13.41 149.86 1.42 4 3/4 8.27 


Typ(e) y 

[in.] 

z 

[in.] 

a 

[lb in] 

b 

[in.] 

U 

[in.] 

V 

[in.] 

D./Z.68 6.69 5.10 5.00 0 1 5/8 3.15 

D./Z.88 8.23 6.26 14.47 0.83 2 1/8 3.94 

D./Z.108 9.80 7.44 18.71 0 2 3/8 4.72 

D./Z.128 12.03 9.27 27.63 0 2 7/8 5.51 

D./Z.148 13.43 10.08 56.32 0 3 5/8 6.69 

D./Z.168 16.56 12.42 103.23 1.18 4 3/8 8.27 

D./Z.188 17.54 13.41 149.86 1.42 4 3/4 8.27 




∗ 

≤ 16 

[rpm] 


≤ 25 

[rpm] 

≤ 40 

[rpm] 

≤ 63 

[rpm] 

≤ 100 

[rpm] 

≤ 160 

[rpm] 

≤ 250 

[rpm] 

≤ 400 

[rpm] 

ccw 360 360 360 360 360 360 344 304 

cw 360 360 360 360 360 360 331 295 

ccw 322 322 322 322 322 322 317 281 

cw 322 322 322 322 322 322 304 272 

ccw 648 648 648 612 394 223 122 205 

cw 770 770 770 734 515 344 241 304 

ccw 626 632 677 583 473 196 218 189 

cw 677 677 677 677 567 302 317 277 

ccw 938 938 938 770 563 304 302 378 

cw 1051 1051 1051 889 722 464 452 497 

ccw 1348 1348 1348 1348 909 803 671 594 

cw 1353 1353 1353 1353 1091 968 839 740 

ccw 2477 2477 2477 1978 1310 806 761 871 

cw 2909 2909 2909 2410 1742 1229 1163 1098 

ccw 5175 5175 5175 4678 3929 3420 2909 2561 

cw 5175 5175 5175 4372 3623 3139 2682 2426 

ccw 7484 7481 6701 5679 4790 3980 3562 3155 

cw 7018 7016 6235 5211 4325 3515 3296 2984 

ccw 10032 10032 9464 7436 6014 5524 5112 4604 

cw 10032 10032 9043 6786 5362 5063 4811 4426 

ccw 15264 13509 10739 9142 7722 6656 6102 5351 

cw 14420 12665 9896 8296 6878 6062 5708 5119 

ccw 19420 19420 19420 19420 19420 19420 19420 19420 

cw 19420 19420 19420 19420 19420 19420 19420 19420 

ccw 26994 26994 26994 26994 22196 22109 25504 - 

cw 26994 26994 26994 26994 25976 25589 26994 - 

∗ 

≤ 16 

[rpm] 


≤ 25 

[rpm] 

≤ 40 

[rpm] 

≤ 63 

[rpm] 

≤ 100 

[rpm] 

≤ 160 

[rpm] 

≤ 250 

[rpm] 

≤ 400 

[rpm] 

ccw 3172 3172 3172 3172 3172 3172 3172 3172 

cw 3172 3172 3172 3172 3172 3172 3172 3172 

ccw 5175 5175 5175 5175 4428 3778 3490 3134 

cw 5175 5175 5175 5175 5175 4520 4100 3683 

ccw 7925 7925 7925 7925 6284 4590 5166 5654 

cw 7925 7925 7925 7925 7490 5794 6185 6080 

ccw 10032 10032 10032 10032 10032 10032 10032 10032 

cw 10032 10032 10032 10032 10032 10032 10032 10032 

ccw 16832 16832 16832 16832 16832 16832 16630 15217 

cw 16832 16832 16832 16832 16832 16832 16236 14983 

ccw 19420 19420 19420 19420 19420 19420 19420 19420 

cw 19420 19420 19420 19420 19420 19420 19420 19420 

ccw 26994 26994 26994 26994 22196 22109 25504 - 

cw 26994 26994 26994 26994 25976 25589 26994 - 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Legend / Explanations 

Performance Data / Torque tables 

P Motor 

=Rated power of motor 

(60Hz) = at mains frequency 60Hz 

Ratio =Total ratio of the gear unit 

=Ratio belonging to preferred list 

n 2 

T 2 

T 1 

=Output speed of gear unit 

(60Hz) at mains frequency 60Hz (4pol.) and 4 pole motor 

=Output torque of gear unit (SF=1) at Service Factor SF =1 

=permisssible continuous input torque of input unit K., A., P. 

SF =Service Factor of the drive 

FU1 x V1 =Dimension of solid shaft of type if input unit A., P. 

F RAperm V1/2 =Permissible overhung load at type of input unit A., P. at 0.5 x V1 

Prefered list 

The preferred list offers short delivery through higher availability. 


3 - 11


Performance Data 

Legend / explanations see page 3 - 11 

PMotor [hp] 

n2 (60 Hz) 

[rpm] 

T2 [lb in] 

SF 

[-] 

Ratio 

[-] 

Gear Motor 

0.25 (60 Hz) 0.05 218546 0.81 32268 D.188-D48-LA71C4 

3 - 12 

0.06 191400 0.92 28260 

0.07 153432 1.15 22654 

0.07 169294 1.05 24996 

0.09 122175 1.45 18039 

0.08 135436 1.31 19997 

0.1 110810 1.60 16361 

0.11 100963 1.75 14907 

0.13 87040 2.03 12504 D.188-Z48-LA71C4 

0.08 141457 0.88 20886 D.168-D48-LA71C4 

0.10 121949 1.02 17519 D.168-Z48-LA71C4 

0.11 107923 1.15 15504 

0.12 98108 1.26 14094 

0.13 88133 1.41 12661 

0.15 75547 1.64 10853 

0.17 68350 1.81 9819 

0.18 63094 1.96 9064 

0.15 79633 0.89 11440 D.148-Z38-LA71C4 

0.16 74406 0.95 10689 

0.18 65440 1.08 9401 

0.20 57310 1.24 8233 

0.23 50690 1.40 7282 

0.25 45942 1.54 6600 

0.29 40555 1.75 5826 

0.32 36587 1.93 5256 

0.22 52207 0.86 7500 D.128-Z38-LA71C4 

0.25 45727 0.99 6569 

0.29 40443 1.12 5810 

0.32 36656 1.23 5266 

0.36 32355 1.39 4648 

0.40 29187 1.55 4193 

0.44 26473 1.70 3803 

0.48 24120 1.87 3465 

0.53 22059 2.05 3169 

0.36 32320 0.85 4643 D.108-Z38-LA71C4 

0.39 29556 0.93 4246 

0.44 26431 1.04 3797 

0.46 25227 1.09 3624 

0.52 22435 1.22 3223 

0.60 19463 1.41 2796 

0.64 18182 1.51 2612 

0.73 15989 1.72 2297 

0.83 14005 1.96 2012 

0.66 17576 0.85 2525 D.88-Z28-LA71C4 

0.73 15941 0.93 2290 

0.80 14507 1.02 2084 

0.91 12822 1.16 1842 

0.98 11841 1.26 1701 

1.1 10198 1.46 1465 

1.3 9265 1.60 1331 

1.4 8423 1.76 1210 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



PMotor n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

1.5 7636 1.95 1097 

0.25 (60 Hz) 1.4 8409 0.84 1208 D.68-Z28-LA71C4 

1.5 7643 0.93 1098 

1.7 6933 1.02 996 

1.8 6307 1.12 906 

2.1 5576 1.27 801 

2.3 5151 1.37 740 

2.6 4434 1.60 637 

2.8 4225 1.68 607 

3.0 3829 1.85 550 

3.3 3487 2.03 501 

2.5 4615 0.86 663 D.48-Z28-LA71C4 

2.8 4197 0.95 603 

3.1 3717 1.07 534 

3.4 3432 1.16 493 

4.0 2951 1.35 424 

4.0 2944 1.35 423 

4.4 2673 1.49 384 

4.8 2429 1.64 349 

5.4 2151 1.85 309 

5.9 1984 2.01 285 

8.0 1846 2.16 208.77 D.48-LA71C4 

5.2 2188 0.89 323 Z.38-Z28-LA71C4 

6.0 1903 1.02 281 

6.6 1714 1.14 253 

7.3 1544 1.26 228 

8.1 1402 1.39 207 

8.7 1696 1.15 191.75 D.38-LA71C4 

9.8 1505 1.29 170.24 

11.2 1320 1.47 149.26 

12.5 1181 1.65 133.57 

14.1 1048 1.86 118.55 

16.1 919 2.12 103.89 

10.2 1454 0.85 164.48 D.28-LA71C4 

11.2 1322 0.94 149.53 

12.7 1170 1.06 132.35 

15.1 980 1.26 110.86 

17.7 836 1.48 94.52 

21 710 1.74 80.34 

24 617 2.01 69.82 

28 537 2.30 60.77 

33 464 2.67 51.35 Z.28-LA71C4 

39 391 3.17 43.3 

44 347 3.57 38.45 

50 304 4.07 33.71 

56 272 4.55 30.16 

63 242 5.12 26.77 

71 212 5.84 23.46 

81 186 6.65 20.63 

90 168 7.36 18.63 

103 147 8.44 16.24 

115 132 9.40 14.58 

3 - 13




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

127 119 10.41 13.17 

140 108 11.48 11.94 

154 98 12.61 10.87 

174 87 14.27 9.61 

0.25 (60 Hz) 265 57 21.73 6.31 Z.28-LA71C4 

3 - 14 

15 973 0.82 110.01 D.18-LA71C4 

18 815 0.98 92.14 

21 695 1.15 78.56 

25 590 1.35 66.78 

29 513 1.55 58.03 

33 447 1.78 50.51 

39 390 2.04 43.15 Z.18-LA71C4 

45 336 2.37 37.23 

52 289 2.76 31.98 

57 266 2.99 29.45 

63 242 3.29 26.77 

71 214 3.72 23.69 

84 179 4.44 19.85 

99 153 5.21 16.92 

116 130 6.13 14.38 

134 113 7.05 12.5 

154 98 7.83 10.88 

171 89 8.29 9.81 

193 78 9.04 8.66 

226 67 7.25 7.42 

260 58 8.03 6.45 

299 51 8.90 5.61 

331 46 9.48 5.06 

375 40 10.73 4.47 

468 32 12.59 3.58 

180 86 3.29 9.33 E.38-LA71C4 

202 77 3.70 8.3 

0.33 (60 Hz) 0.08 199833 0.89 19997 D.188-D48-LA71S4 

0.09 180266 0.98 18039 

0.10 163498 1.08 16361 

0.11 148968 1.19 14907 

0.13 128078 1.38 12504 D.188-Z48-LA71S4 

0.15 113349 1.56 11066 

0.18 92566 1.91 9037 

0.12 144365 0.86 14094 D.168-Z48-LA71S4 

0.13 129686 0.96 12661 

0.15 111167 1.11 10853 

0.17 100576 1.23 9819 

0.18 92842 1.33 9064 

0.21 80725 1.53 7881 

0.23 73299 1.69 7156 

0.25 66928 1.85 6534 

0.28 61407 2.02 5995 

0.20 84330 0.84 8233 D.148-Z38-LA71S4 

0.23 74589 0.95 7282 

0.25 67604 1.05 6600 

0.29 59676 1.19 5826 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.32 53837 1.31 5256 

0.35 48828 1.45 4767 

0.38 44485 1.59 4343 

0.42 40685 1.74 3972 

0.47 36383 1.95 3552 

0.32 53940 0.84 5266 D.128-Z38-LA71S4 

0.36 47609 0.95 4648 

0.33 (60 Hz) 0.40 42949 1.05 4193 D.128-Z38-LA71S4 

0.44 38954 1.16 3803 

0.48 35492 1.27 3465 

0.53 32460 1.39 3169 

0.59 29029 1.55 2834 

0.64 26652 1.69 2602 

0.71 24020 1.88 2345 

0.52 33013 0.83 3223 D.108-Z38-LA71S4 

0.60 28639 0.96 2796 

0.64 26755 1.03 2612 

0.72 23528 1.17 2297 

0.83 20609 1.33 2012 

0.94 18233 1.50 1780 

1.0 16522 1.66 1613 

1.2 14586 1.88 1424 

0.98 17423 0.85 1701 D.88-Z28-LA71S4 

1.1 15006 0.99 1465 

1.3 13633 1.09 1331 

1.4 12394 1.20 1210 

1.5 11237 1.32 1097 

1.7 10233 1.45 999 

1.9 9045 1.64 883 

2.0 8348 1.78 815 

2.1 8205 0.86 801 D.68-Z28-LA71S4 

2.3 7580 0.93 740 

2.6 6525 1.08 637 

2.7 6217 1.14 607 

3.0 5634 1.26 550 

3.3 5132 1.38 501 

3.8 4538 1.56 443 

4.1 4189 1.69 409 

4.7 3606 1.96 352 

5.9 3300 2.15 281.01 D.68-LA71S4 

3.9 4967 0.80 423 D.48-Z28-LA71S4 

3.9 4979 0.80 424 

4.3 4509 0.88 384 

4.8 4098 0.97 349 

5.4 3628 1.10 309 

5.8 3346 1.19 285 

6.8 2889 1.38 246 

7.5 2618 1.52 223 

8.0 2451 1.62 208.77 D.48-LA71S4 

9.0 2180 1.83 185.66 

10.3 1891 2.11 161.05 

11.1 1767 2.25 150.48 

7.3 2734 0.71 228 Z.38-Z28-LA71S4 

3 - 15



P Motor 

[hp] 

3 - 16 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

8.0 2482 0.78 207 

8.7 2252 0.86 191.75 D.38-LA71S4 

9.8 1999 0.97 170.24 

11.2 1753 1.11 149.26 

12.5 1568 1.24 133.57 

14.0 1392 1.40 118.55 

16.0 1220 1.60 103.89 

18.2 1073 1.81 91.34 

20 969 2.01 82.52 

0.33 (60 Hz) 23 844 2.30 71.91 D.38-LA71S4 

26 758 2.57 64.58 

15.0 1302 0.95 110.86 D.28-LA71S4 

17.6 1110 1.12 94.52 

21 943 1.31 80.34 

24 820 1.51 69.82 

27 714 1.73 60.77 

32 616 2.01 51.35 Z.28-LA71S4 

38 519 2.38 43.3 

43 461 2.68 38.45 

49 404 3.06 33.71 

55 362 3.42 30.16 

62 321 3.86 26.77 

71 281 4.40 23.46 

81 247 5.00 20.63 

89 223 5.54 18.63 

103 195 6.36 16.24 

114 175 7.08 14.58 

126 158 7.84 13.17 

139 143 8.65 11.94 

153 130 9.50 10.87 

173 115 10.74 9.61 

188 106 11.64 8.87 

218 92 13.13 7.64 

240 83 14.02 6.94 

264 76 11.10 6.31 

291 69 11.98 5.72 

320 62 13.03 5.21 

362 55 14.10 4.6 

392 51 15.62 4.25 

21 922 0.86 78.56 D.18-LA71S4 

25 784 1.02 66.78 

29 681 1.17 58.03 

33 593 1.34 50.51 

39 517 1.54 43.15 Z.18-LA71S4 

45 446 1.78 37.23 

52 383 2.08 31.98 

57 353 2.25 29.45 

62 321 2.48 26.77 

70 284 2.80 23.69 

84 238 3.34 19.85 

98 203 3.92 16.92 

116 172 4.62 14.38 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

133 150 5.31 12.5 

153 130 5.89 10.88 

170 118 6.24 9.81 

192 104 6.81 8.66 

224 89 5.46 7.42 

258 77 6.05 6.45 

297 67 6.70 5.61 

329 61 7.14 5.06 

372 54 8.08 4.47 

465 43 9.48 3.58 

147 138 3.51 11.3 E.48-LA71S4 

178 114 2.48 9.33 E.38-LA71S4 

0.33 (60 Hz) 201 102 2.79 8.3 E.38-LA71S4 

231 88 3.81 7.2 

0.5 (60 Hz) 0.13 199362 0.89 12504 D.188-Z48-LA71M4 

0.15 176434 1.00 11066 

0.19 144084 1.23 9037 

0.22 123501 1.43 7746 

0.24 111734 1.58 7008 

0.26 103141 1.72 6469 

0.30 89684 1.97 5625 

0.17 156552 0.79 9819 D.168-Z48-LA71M4 

0.19 144515 0.86 9064 

0.21 125653 0.99 7881 

0.23 114094 1.09 7156 

0.26 104177 1.19 6534 

0.28 95583 1.30 5995 

0.30 88058 1.41 5523 

0.33 79974 1.55 5016 

0.37 72847 1.70 4569 

0.40 66741 1.86 4186 

0.32 83801 0.84 5256 D.148-Z38-LA71M4 

0.35 76004 0.93 4767 

0.39 69244 1.02 4343 

0.42 63329 1.12 3972 

0.47 56632 1.25 3552 

0.52 51993 1.36 3261 

0.57 46859 1.51 2939 

0.67 40194 1.76 2521 

0.66 40306 1.76 2528 

0.75 35937 1.97 2254 

0.48 55245 0.82 3465 D.128-Z38-LA71M4 

0.53 50526 0.89 3169 

0.59 45185 1.00 2834 

0.65 41486 1.09 2602 

0.72 37388 1.21 2345 

0.83 32159 1.40 2017 

0.84 32063 1.41 2011 

0.93 28667 1.57 1798 

1.0 26323 1.71 1651 

1.1 23724 1.90 1488 

0.83 32079 0.86 2012 D.108-Z38-LA71M4 

0.94 28380 0.97 1780 

3 - 17




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

1.0 25717 1.07 1613 

1.2 22704 1.21 1424 

1.3 20472 1.34 1284 

1.4 18575 1.48 1165 

1.6 16916 1.62 1061 

1.7 15481 1.77 971 

1.9 13839 1.98 868 

1.5 17490 0.85 1097 D.88-Z28-LA71M4 

1.7 15928 0.93 999 

1.9 14078 1.06 883 

2.1 12994 1.14 815 

2.4 11193 1.33 702 

2.6 10316 1.44 647 

2.9 9359 1.59 587 

0.5 (60 Hz) 3.1 8514 1.75 534 D.88-Z28-LA71M4 

3 - 18 

3.6 7525 1.98 472 

3.1 8769 0.81 550 D.68-Z28-LA71M4 

3.4 7988 0.89 501 

3.8 7063 1.00 443 

4.1 6521 1.09 409 

4.8 5612 1.26 352 

5.3 5102 1.39 320 

6.0 4955 1.43 281.01 D.68-LA71M4 

6.8 4385 1.61 248.68 

7.4 3986 1.78 226.07 

8.3 3581 1.98 203.09 

5.4 5448 0.73 309 D.48-Z28-LA71M4 

5.9 5025 0.79 285 

6.8 4337 0.92 246 

7.5 3932 1.01 223 

8.0 3681 1.08 208.77 D.48-LA71M4 

9.0 3274 1.22 185.66 

10.4 2840 1.40 161.05 

11.2 2653 1.50 150.48 

12.7 2333 1.71 132.34 

14.5 2044 1.95 115.91 

16.4 1808 2.20 102.52 

18.1 1638 2.43 92.91 

14.2 2090 0.93 118.55 D.38-LA71M4 

16.2 1832 1.06 103.89 

18.4 1611 1.21 91.34 

20 1455 1.34 82.52 

23 1268 1.53 71.91 

26 1139 1.71 64.58 

29 1028 1.89 58.3 

32 932 2.09 52.86 

38 794 2.45 44.12 Z.38-LA71M4 

43 707 2.60 39.24 

21 1417 0.87 80.34 D.28-LA71M4 

24 1231 1.01 69.82 

28 1071 1.16 60.77 

33 925 1.34 51.35 Z.28-LA71M4 

39 780 1.59 43.3 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

44 692 1.79 38.45 

50 607 2.04 33.71 

56 543 2.28 30.16 

63 482 2.57 26.77 

72 422 2.93 23.46 

81 371 3.33 20.63 

33 891 0.89 50.51 D.18-LA71M4 

39 777 1.02 43.15 Z.18-LA71M4 

45 670 1.19 37.23 

53 576 1.38 31.98 

57 530 1.50 29.45 

63 482 1.65 26.77 

71 427 1.87 23.69 

85 357 2.23 19.85 

99 305 2.61 16.92 

117 259 3.07 14.38 

0.5 (60 Hz) 134 225 3.54 12.5 Z.18-LA71M4 

154 196 3.93 10.88 

171 177 4.16 9.81 

194 156 4.53 8.66 

226 134 3.64 7.42 

260 116 4.03 6.45 

299 101 4.46 5.61 

332 91 4.75 5.06 

376 80 5.38 4.47 

135 228 3.14 12.4 E.68-LA71M4 

150 206 3.96 11.18 

149 208 2.34 11.3 E.48-LA71M4 

168 184 3.85 10 

185 167 3.39 9.09 

180 172 1.65 9.33 E.38-LA71M4 

202 153 1.85 8.3 

233 132 2.54 7.2 

250 124 3.43 6.73 

284 109 4.30 5.92 

0.75 (60 Hz) 0.19 220728 0.80 9037 D.188-Z48-LAI80S4 

0.22 189196 0.94 7746 

0.24 171170 1.03 7008 

0.26 158005 1.12 6469 

0.30 137390 1.29 5625 

0.33 124738 1.42 5107 

0.37 113894 1.55 4663 

0.40 104514 1.69 4279 

0.43 96283 1.84 3942 

0.48 87441 2.02 3580 

0.29 146428 0.85 5995 D.168-Z48-LAI80S4 

0.31 134899 0.92 5523 

0.34 122516 1.01 5016 

0.37 111598 1.11 4569 

0.41 102243 1.21 4186 

0.46 91227 1.36 3735 

0.48 86757 0.82 3552 D.148-Z38-LAI80S4 

3 - 19




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.52 79650 0.89 3261 

0.58 71785 0.99 2939 

0.68 61575 1.15 2521 

0.68 61746 1.15 2528 

0.76 55054 1.29 2254 

0.83 50560 1.40 2070 

0.92 45553 1.55 1865 

1.1 39178 1.81 1604 

1.0 39837 1.78 1631 D.148-Z48-LAI80S4 

1.1 36686 1.93 1502 

0.85 49265 0.92 2017 D.128-Z38-LAI80S4 

0.85 49119 0.92 2011 

0.95 43916 1.03 1798 

1.0 40326 1.12 1651 

1.1 36344 1.24 1488 

1.3 31264 1.44 1280 

1.3 31044 1.45 1271 D.128-Z48-LAI80S4 

1.5 28479 1.58 1166 

1.6 26232 1.72 1074 

0.75 (60 Hz) 1.8 23814 1.89 975 D.128-Z48-LAI80S4 

1.3 31362 0.87 1284 D.108-Z38-LAI80S4 

1.5 28455 0.96 1165 

1.6 25915 1.06 1061 

1.8 23717 1.16 971 

2.0 21201 1.29 868 

2.1 19467 1.41 797 

2.4 17537 1.56 718 

2.8 15095 1.82 618 

2.8 15046 1.82 616 

2.4 17453 0.85 702 D.88-Z28-LA71ZMP4 

2.6 16085 0.92 647 

2.9 14593 1.02 587 

3.1 13276 1.12 534 

3.6 11734 1.27 472 

3.9 10839 1.37 436 

4.5 9323 1.59 375 

4.9 8478 1.75 341 

5.7 7806 1.90 300.41 D.88-LAI80S4 

3 - 20 

6.3 7039 2.11 270.9 

4.9 8598 0.82 352 D.68-Z28-LA71ZMP4 

5.3 7816 0.91 320 

6.1 7302 0.97 281.01 D.68-LAI80S4 

6.9 6462 1.10 248.68 

7.6 5874 1.20 226.07 

8.4 5277 1.34 203.09 

9.8 4523 1.56 174.08 

10.9 4092 1.73 157.5 

11.8 3778 1.87 145.38 

13.5 3285 2.15 126.41 

14.9 2982 2.37 114.78 

10.6 4185 0.95 161.05 D.48-LAI80S4 

11.4 3910 1.02 150.48 

12.9 3439 1.16 132.34 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

14.8 3012 1.32 115.91 

16.7 2664 1.49 102.52 

18.4 2414 1.65 92.91 

21 2131 1.87 82.02 

23 1923 2.07 73.99 

25 1744 2.28 67.1 

28 1589 2.51 61.14 

33 1361 1.90 51.28 Z.48-LAI80S4 

21 2144 0.91 82.52 D.38-LAI80S4 

24 1869 1.04 71.91 

26 1678 1.16 64.58 

29 1515 1.28 58.3 

32 1374 1.42 52.86 

36 1250 1.56 48.1 

39 1171 1.66 44.12 Z.38-LAI80S4 

44 1041 1.77 39.24 

50 903 2.15 34.04 

54 844 2.31 31.8 

61 742 2.62 27.97 

70 650 2.99 24.5 

33 1387 0.89 51.35 Z.28-LA71ZMP4 

0.75 (60 Hz) 39 1170 1.06 43.3 Z.28-LA71ZMP4 

44 1039 1.19 38.45 

50 911 1.36 33.71 

56 815 1.52 30.16 

63 723 1.71 26.77 

72 634 1.95 23.46 

81 557 2.22 20.63 

90 503 2.46 18.63 

103 439 2.82 16.24 

115 394 3.14 14.58 

128 356 3.48 13.17 

141 323 3.84 11.94 

266 170 4.93 6.31 

53 864 0.92 31.98 Z.18-LA71ZMP4 

57 795 1.00 29.45 

63 723 1.10 26.77 

71 640 1.24 23.69 

85 536 1.48 19.85 

99 457 1.74 16.92 

117 388 2.05 14.38 

134 338 2.36 12.5 

154 294 2.62 10.88 

171 265 2.77 9.81 

194 234 3.02 8.66 

226 200 2.42 7.42 

260 174 2.69 6.45 

299 152 2.98 5.61 

332 137 3.17 5.06 

376 121 3.59 4.47 

469 97 4.21 3.58 

138 336 2.13 12.4 E.68-LAI80S4 

3 - 21



P Motor 

[hp] 

3 - 22 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

153 303 2.69 11.18 

170 273 3.08 10.08 

151 306 1.59 11.3 E.48-LAI80S4 

171 271 2.61 10 

188 246 2.30 9.09 

209 221 3.40 8.17 

244 190 4.52 7 

183 253 1.12 9.33 E.38-LAI80S4 

206 225 1.26 8.3 

238 195 1.72 7.2 

254 182 2.33 6.73 

289 160 2.92 5.92 

330 140 4.41 5.18 

412 112 4.87 4.15 

1 (60 Hz) 0.26 210673 0.84 6469 D.188-Z48-LA80M4 

0.30 183187 0.97 5625 

0.33 166318 1.06 5107 

0.37 151858 1.17 4663 

0.40 139352 1.27 4279 

0.43 128378 1.38 3942 

0.48 116588 1.52 3580 

0.52 106200 1.67 3261 

0.57 97309 1.82 2988 

0.64 86823 2.04 2666 

1 (60 Hz) 0.37 148797 0.83 4569 D.168-Z48-LA80M4 

0.41 136324 0.91 4186 

0.46 121636 1.02 3735 

0.51 108544 1.14 3333 

0.60 92196 1.34 2831 

0.73 76759 1.61 2357 

0.74 75522 1.64 2319 

0.83 67413 1.84 2070 

0.68 82100 0.86 2521 D.148-Z38-LA80M4 

0.68 82328 0.86 2528 

0.76 73405 0.96 2254 

0.83 67413 1.05 2070 

0.92 60737 1.17 1865 

1.1 52237 1.36 1604 

1.0 53116 1.33 1631 D.148-Z48-LA80M4 

1.1 48915 1.45 1502 

1.2 44421 1.59 1364 

1.3 40480 1.75 1243 

1.5 37093 1.91 1139 

1.0 53767 0.84 1651 D.128-Z38-LA80M4 

1.1 48459 0.93 1488 

1.3 41685 1.08 1280 

1.3 41392 1.09 1271 D.128-Z48-LA80M4 

1.5 37973 1.19 1166 

1.6 34977 1.29 1074 

1.8 31752 1.42 975 

1.9 28952 1.56 889 

2.1 26509 1.70 814 

2.4 23643 1.91 726 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

1.8 31622 0.87 971 D.108-Z38-LA80M4 

2.0 28268 0.97 868 

2.1 25956 1.06 797 

2.4 23383 1.17 718 

2.8 20126 1.36 618 

2.8 20061 1.37 616 

3.1 17944 1.53 551 

3.4 16479 1.66 506 

3.8 14850 1.85 456 

4.8 12448 2.20 359.3 D.108-LA80M4 

3.1 18188 0.82 534 D.88-Z28-LA71ZMD4 

3.5 16077 0.92 472 

3.8 14850 1.00 436 

4.4 12773 1.16 375 

4.8 11615 1.28 341 

5.7 10408 1.43 300.41 D.88-LA80M4 

6.3 9385 1.58 270.9 

7.0 8464 1.76 244.29 

8.0 7402 2.01 213.64 

8.9 6645 2.24 191.8 

7.6 7832 0.90 226.07 D.68-LA80M4 

8.4 7036 1.01 203.09 

9.8 6031 1.17 174.08 

10.9 5457 1.30 157.5 

11.8 5037 1.41 145.38 

13.5 4380 1.62 126.41 

1 (60 Hz) 14.9 3977 1.78 114.78 D.68-LA80M4 

16.3 3631 1.95 104.8 

17.8 3331 2.12 96.16 

19.3 3069 2.31 88.59 

21 2788 2.54 80.46 

36 1702 2.78 48.09 Z.68-LA80M4 

12.9 4585 0.87 132.34 D.48-LA80M4 

14.8 4016 0.99 115.91 

16.7 3552 1.12 102.52 

18.4 3219 1.24 92.91 

21 2842 1.40 82.02 

23 2563 1.55 73.99 

25 2325 1.71 67.1 

28 2118 1.88 61.14 

31 1937 2.05 55.92 

34 1732 2.30 50 

33 1814 1.42 51.28 Z.48-LA80M4 

38 1606 2.48 45.38 

41 1460 2.73 41.26 

26 2237 0.87 64.58 D.38-LA80M4 

29 2020 0.96 58.3 

32 1831 1.06 52.86 

36 1666 1.17 48.1 

39 1561 1.25 44.12 Z.38-LA80M4 

44 1388 1.33 39.24 

50 1204 1.62 34.04 

54 1125 1.73 31.8 

3 - 23




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

61 990 1.97 27.97 

70 867 2.24 24.5 

79 767 2.54 21.67 

87 695 2.80 19.64 

99 613 3.17 17.33 

109 553 3.52 15.64 

121 502 3.88 14.18 

43 1423 0.87 38.45 Z.28-LA71ZMD4 

49 1247 0.99 33.71 

54 1116 1.11 30.16 

61 991 1.25 26.77 

70 868 1.43 23.46 

79 763 1.62 20.63 

88 689 1.80 18.63 

101 601 2.06 16.24 

112 540 2.29 14.58 

124 487 2.54 13.17 

137 442 2.80 11.94 

150 402 3.08 10.87 

170 356 3.48 9.61 

184 328 3.77 8.87 

214 283 4.26 7.64 

236 257 4.54 6.94 

259 234 3.60 6.31 

286 212 3.88 5.72 

314 193 4.22 5.21 

355 170 4.57 4.6 

385 157 5.06 4.25 

1 (60 Hz) 447 135 5.22 3.66 Z.28-LA71ZMD4 

491 123 5.53 3.33 

69 877 0.91 23.69 Z.18-LA71ZMD4 

3 - 24 

82 735 1.08 19.85 

97 626 1.27 16.92 

114 532 1.50 14.38 

131 463 1.72 12.5 

150 403 1.91 10.88 

167 363 2.02 9.81 

189 320 2.21 8.66 

220 275 1.77 7.42 

253 239 1.96 6.45 

291 208 2.17 5.61 

323 187 2.31 5.06 

366 165 2.62 4.47 

457 132 3.07 3.58 

138 448 1.60 12.4 E.68-LA80M4 

153 404 2.02 11.18 

170 364 2.31 10.08 

194 319 4.17 8.82 

151 408 1.19 11.3 E.48-LA80M4 

171 361 1.96 10 

188 328 1.72 9.09 

209 295 2.55 8.17 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

244 253 3.39 7 

270 229 4.45 6.33 

292 211 5.02 5.85 

206 300 0.94 8.3 E.38-LA80M4 

238 260 1.29 7.2 

254 243 1.74 6.73 

289 214 2.19 5.92 

330 187 3.31 5.18 

373 165 4.17 4.58 

412 150 3.66 4.15 

466 133 4.67 3.67 

517 120 4.81 3.31 

1.5 (60 Hz) 0.41 203669 0.87 4279 D.188-Z48-LA90SB4E 

0.45 187629 0.94 3942 

0.49 170398 1.04 3580 

0.54 155215 1.14 3261 

0.59 142221 1.24 2988 

0.66 126895 1.39 2666 

0.74 113234 1.56 2379 

0.87 96194 1.84 2021 

0.62 134748 0.92 2831 D.168-Z48-LA90SB4E 

0.74 112187 1.10 2357 

0.76 110378 1.12 2319 

0.85 98526 1.26 2070 

1.0 83676 1.48 1758 

1.2 69635 1.78 1463 

1.4 58354 2.12 1226 D.168-Z68-LA90SB4E 

1.1 76346 0.93 1604 D.148-Z38-LA90SB4E 

1.2 71491 0.99 1502 D.148-Z48-LA90SB4E 

1.1 77631 0.91 1631 

1.3 64923 1.09 1364 

1.5 (60 Hz) 1.4 59163 1.20 1243 D.148-Z48-LA90SB4E 

1.5 54213 1.31 1139 

1.7 48359 1.46 1016 

1.9 43171 1.64 907 

2.3 36650 1.93 770 

1.6 51120 0.88 1074 D.128-Z48-LA90SB4E 

1.8 46407 0.97 975 

2.0 42314 1.07 889 

2.2 38744 1.16 814 

2.4 34556 1.31 726 

2.7 30843 1.46 648 

3.2 26226 1.72 551 

3.8 21800 2.07 458 

3.9 21466 2.10 451 

2.8 29415 0.93 618 D.108-Z38-LA90SB4E 

2.8 29320 0.94 616 

3.2 26226 1.05 551 

3.5 24084 1.14 506 

3.8 21704 1.26 456 

4.5 18658 1.47 392 

4.9 18193 1.51 359.3 D.108-LA90SB4E 

5.4 16467 1.67 325.21 

6.2 14417 1.90 284.73 

3 - 25



P Motor 

[hp] 

3 - 26 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

6.8 13006 2.11 256.86 

4.7 17849 0.83 375 D.88-Z28-LA90SB4E 

5.1 16231 0.92 341 

5.8 15211 0.98 300.41 D.88-LA90SB4E 

6.5 13717 1.08 270.9 

7.2 12370 1.20 244.29 

8.2 10818 1.37 213.64 

9.2 9712 1.53 191.8 

10.0 8870 1.68 175.18 

11.3 7872 1.89 155.46 

12.2 7266 2.05 143.5 

13.5 6572 2.26 129.79 

11.1 7975 0.89 157.5 D.68-LA90SB4E 

12.1 7361 0.96 145.38 

13.9 6401 1.11 126.41 

15.3 5812 1.22 114.78 

16.7 5307 1.33 104.8 

18.3 4869 1.45 96.16 

19.8 4486 1.58 88.59 

22 4074 1.74 80.46 

24 3712 1.91 73.3 

26 3400 2.08 67.14 

29 3034 2.33 59.91 

33 2707 2.61 53.47 

36 2487 1.90 48.09 Z.68-LA90SB4E 

21 4153 0.96 82.02 D.48-LA90SB4E 

24 3747 1.06 73.99 

26 3398 1.17 67.1 

29 3096 1.29 61.14 

31 2832 1.41 55.92 

35 2532 1.57 50 

39 2347 1.70 45.38 Z.48-LA90SB4E 

1.5 (60 Hz) 43 2134 1.87 41.26 Z.48-LA90SB4E 

47 1916 2.08 37.06 

55 1643 2.42 31.77 

61 1486 2.68 28.74 

66 1372 2.90 26.53 

76 1193 3.34 23.07 

41 2154 0.90 42.53 D.38-LA90SB4E 

45 1989 0.98 39.28 

52 1760 1.11 34.04 Z.38-LA90SB4E 

55 1644 1.18 31.8 

63 1446 1.35 27.97 

72 1267 1.54 24.5 

81 1121 1.74 21.67 

89 1016 1.92 19.64 

101 896 2.17 17.33 

112 809 2.41 15.64 

124 733 2.65 14.18 

136 668 2.91 12.92 

148 611 3.18 11.82 

166 547 3.40 10.57 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

181 502 3.53 9.7 

201 452 3.81 8.75 

233 389 4.32 7.52 

234 388 4.22 7.5 

262 347 4.59 6.71 

285 319 4.72 6.16 

316 287 5.08 5.55 

66 1384 0.89 26.77 Z.28-LA90SB4E 

75 1213 1.02 23.46 

85 1067 1.16 20.63 

94 963 1.29 18.63 

108 840 1.47 16.24 

120 754 1.64 14.58 

133 681 1.82 13.17 

147 617 2.01 11.94 

161 562 2.20 10.87 

183 497 2.49 9.61 

198 459 2.70 8.87 

230 395 3.04 7.64 

253 359 3.25 6.94 

278 326 2.57 6.31 

307 296 2.78 5.72 

337 269 3.02 5.21 

382 238 3.27 4.6 

413 220 3.62 4.25 

480 189 3.74 3.66 

527 172 3.95 3.33 

170 545 3.73 10.33 E.88-LA90SB4E 

186 499 3.72 9.46 

142 655 1.09 12.4 E.68-LA90SB4E 

157 590 1.38 11.18 

174 532 1.58 10.08 

199 466 2.85 8.82 

222 418 3.60 7.92 

243 382 3.48 7.23 

1.5 (60 Hz) 273 339 4.44 6.42 E.68-LA90SB4E 

176 528 1.34 10 E.48-LA90SB4E 

193 480 1.18 9.09 

215 431 1.74 8.17 

251 370 2.32 7 

277 334 3.04 6.33 

300 309 3.44 5.85 

345 268 3.96 5.08 

380 244 4.72 4.62 

244 380 0.88 7.2 E.38-LA90SB4E 

261 355 1.19 6.73 

296 313 1.50 5.92 

339 273 2.26 5.18 

383 242 2.85 4.58 

423 219 2.50 4.15 

478 194 3.20 3.67 

530 175 3.29 3.31 

3 - 27




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

585 158 4.46 3 

643 144 4.91 2.73 

702 132 4.89 2.5 

783 118 5.39 2.24 

856 108 6.53 2.05 

2 (60 Hz) 0.54 204621 0.86 3261 D.188-Z48-LA90ZLB4E 

0.59 187491 0.94 2988 

0.67 167286 1.06 2666 

0.75 149278 1.19 2379 

0.88 126814 1.40 2021 

1.1 105542 1.68 1682 

1.1 103848 1.70 1655 

1.2 92679 1.91 1477 

0.86 129888 0.95 2070 D.168-Z48-LA90ZLB4E 

1.0 110311 1.12 1758 

1.2 91800 1.35 1463 

1.2 91675 1.35 1461 D.168-Z68-LA90ZLB4E 

1.4 76929 1.61 1226 

1.7 65634 1.89 1046 

1.4 77996 0.91 1243 D.148-Z48-LA90ZLB4E 

1.6 71470 0.99 1139 

1.7 63752 1.11 1016 

2.0 56912 1.24 907 

2.3 48316 1.47 770 

2.8 39594 1.79 631 

2.8 40221 1.76 641 

3.2 35327 2.00 563 

2.2 51077 0.88 814 D.128-Z48-LA90ZLB4E 

2.4 45555 0.99 726 

2.7 40661 1.11 648 

3.2 34574 1.31 551 

3.9 28739 1.57 458 

3.9 28299 1.59 451 

4.4 25287 1.78 403 

5.2 21460 2.10 342 

3.5 31751 0.86 506 D.108-Z38-LA90ZLB4E 

3.9 28613 0.96 456 

4.5 24597 1.12 392 

2 (60 Hz) 4.9 23984 1.14 359.3 D.108-LA90ZLB4E 

5.5 21709 1.26 325.21 

6.2 19007 1.44 284.73 

6.9 17146 1.60 256.86 

7.5 15700 1.75 235.19 

8.5 13965 1.96 209.21 

9.3 12764 2.15 191.21 

10.1 11734 2.34 175.78 

7.3 16307 0.91 244.29 D.88-LA90ZLB4E 

3 - 28 

8.3 14261 1.04 213.64 

9.3 12803 1.16 191.8 

10.1 11694 1.27 175.18 

11.4 10377 1.43 155.46 

12.4 9579 1.55 143.5 

13.7 8664 1.72 129.79 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

14.9 7978 1.86 119.52 

16.1 7379 2.01 110.54 

17.3 6850 2.17 102.61 

19.6 6043 2.46 90.53 

15.5 7662 0.92 114.78 D.68-LA90ZLB4E 

16.9 6996 1.01 104.8 

18.5 6419 1.10 96.16 

20 5914 1.20 88.59 

22 5371 1.32 80.46 

24 4893 1.45 73.3 

26 4482 1.58 67.14 

30 3999 1.77 59.91 

33 3569 1.98 53.47 

37 3278 1.44 48.09 Z.68-LA90ZLB4E 

42 2867 2.47 42.06 

47 2574 2.75 37.76 

51 2351 3.01 34.49 

26 4479 0.89 67.1 D.48-LA90ZLB4E 

29 4081 0.98 61.14 

32 3733 1.07 55.92 

36 3338 1.19 50 

39 3094 1.29 45.38 Z.48-LA90ZLB4E 

43 2813 1.42 41.26 

48 2527 1.58 37.06 

56 2166 1.84 31.77 

62 1959 2.03 28.74 

67 1809 2.20 26.53 

77 1573 2.53 23.07 

85 1428 2.79 20.95 

93 1304 3.05 19.13 

101 1196 3.33 17.55 

110 1102 3.45 16.17 

121 1001 3.71 14.68 

133 912 3.98 13.38 

145 835 4.24 12.25 

56 2168 0.90 31.8 Z.38-LA90ZLB4E 

63 1907 1.02 27.97 

72 1670 1.17 24.5 

82 1477 1.32 21.67 

90 1339 1.45 19.64 

2 (60 Hz) 102 1181 1.65 17.33 Z.38-LA90ZLB4E 

113 1066 1.83 15.64 

125 967 2.01 14.18 

137 881 2.21 12.92 

150 806 2.41 11.82 

168 721 2.58 10.57 

183 661 2.68 9.7 

203 597 2.89 8.75 

236 513 3.28 7.52 

237 511 3.20 7.5 

265 457 3.48 6.71 

288 420 3.58 6.16 

3 - 29



P Motor 

[hp] 

3 - 30 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

320 378 3.86 5.55 

372 325 4.35 4.77 

86 1406 0.88 20.63 Z.28-LA90ZLB4E 

95 1270 0.97 18.63 

109 1107 1.12 16.24 

122 994 1.25 14.58 

135 898 1.38 13.17 

149 814 1.52 11.94 

163 741 1.67 10.87 

185 655 1.89 9.61 

200 605 2.05 8.87 

232 521 2.31 7.64 

256 473 2.47 6.94 

281 430 1.95 6.31 

310 390 2.11 5.72 

341 355 2.29 5.21 

386 314 2.48 4.6 

418 290 2.75 4.25 

485 250 2.83 3.66 

533 227 3.00 3.33 

172 719 2.83 10.33 E.88-LA90ZLB4E 

188 658 2.82 9.46 

211 586 3.70 8.42 

231 535 4.05 7.69 

159 778 1.05 11.18 E.68-LA90ZLB4E 

176 702 1.20 10.08 

201 614 2.16 8.82 

224 551 2.73 7.92 

246 503 2.64 7.23 

276 447 3.37 6.42 

300 412 4.08 5.92 

331 373 5.22 5.36 

178 696 1.02 10 E.48-LA90ZLB4E 

195 633 0.89 9.09 

217 569 1.32 8.17 

254 487 1.76 7 

280 441 2.31 6.33 

303 407 2.61 5.85 

349 354 3.00 5.08 

384 322 3.58 4.62 

422 293 4.53 4.21 

459 269 5.25 3.87 

499 248 5.00 3.56 

2 (60 Hz) 548 225 5.89 3.24 E.48-LA90ZLB4E 

264 468 0.91 6.73 E.38-LA90ZLB4E 

300 412 1.14 5.92 

343 360 1.72 5.18 

388 319 2.16 4.58 

428 289 1.90 4.15 

484 255 2.42 3.67 

536 230 2.50 3.31 

592 209 3.39 3 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

650 190 3.72 2.73 

710 174 3.71 2.5 

792 156 4.09 2.24 

866 143 4.96 2.05 

959 129 5.63 1.85 

1116 111 5.76 1.59 

3 (60 Hz) 0.87 192938 0.92 2021 D.188-Z48-LA100ZLP4E 

1.0 160575 1.10 1682 

1.1 157997 1.12 1655 

1.2 141004 1.25 1477 

1.4 119811 1.48 1255 

1.7 99667 1.78 1044 

1.4 119429 1.48 1251 D.188-Z68-LA100ZLP4E 

1.7 100240 1.77 1050 

2.0 85538 2.07 896 

1.2 139477 0.89 1461 D.168-Z68-LA100ZLP4E 

1.4 117042 1.06 1226 

1.7 99858 1.24 1046 

2.0 83151 1.49 871 

2.4 68927 1.80 722 

2.7 60812 2.04 637 

1.2 139668 0.89 1463 D.168-Z48-LA100ZLP4E 

2.3 73509 0.96 770 D.148-Z48-LA100ZLP4E 

2.7 61194 1.16 641 

2.8 60239 1.18 631 

3.1 53748 1.32 563 

3.7 45633 1.55 478 

4.4 37996 1.86 398 

5.2 32087 2.21 336.11 D.148-LA100ZLP4E 

3.2 52602 1.35 551 D.128-Z48-LA100ZLP4E 

3.9 43055 1.64 451 

3.8 43724 1.62 458 

4.3 38473 1.84 403 

5.1 32650 2.17 342 

6.1 27208 2.60 285 

6.5 27234 1.66 268.16 D.128-LA100ZLP4E 

7.1 24977 1.81 245.93 

8.0 22315 2.02 219.72 

8.7 20436 2.21 201.22 

6.1 28917 0.95 284.73 D.108-LA100ZLP4E 

6.8 26087 1.05 256.86 

7.4 23886 1.15 235.19 

8.4 21247 1.29 209.21 

9.2 19419 1.41 191.21 

10.0 17852 1.54 175.78 

10.8 16493 1.66 162.4 

3 (60 Hz) 11.6 15305 1.79 150.7 D.108-LA100ZLP4E 

12.5 14256 1.92 140.37 

13.8 12888 2.13 126.9 

15.0 11865 2.31 116.83 

11.3 15789 0.94 155.46 D.88-LA100ZLP4E 

12.2 14574 1.02 143.5 

13.5 13182 1.13 129.79 

3 - 31



P Motor 

[hp] 

3 - 32 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

14.6 12138 1.22 119.52 

15.8 11226 1.32 110.54 

17.1 10421 1.43 102.61 

19.3 9194 1.62 90.53 

21 8488 1.75 83.58 

23 7605 1.95 74.88 

25 7013 2.12 69.05 

30 5883 2.53 57.93 

34 5262 2.47 50.73 Z.88-LA100ZLP4E 

22 8172 0.87 80.46 D.68-LA100ZLP4E 

24 7444 0.95 73.3 

26 6819 1.04 67.14 

29 6084 1.16 59.91 

33 5430 1.30 53.47 

42 4363 1.62 42.06 Z.68-LA100ZLP4E 

46 3917 1.81 37.76 

51 3577 1.98 34.49 

57 3174 2.23 30.6 

62 2930 2.42 28.25 

68 2650 2.67 25.55 

74 2441 2.90 23.53 

80 2257 3.14 21.76 

87 2095 3.38 20.2 

38 4663 0.85 45.91 D.48-LA100ZLP4E 

42 4203 0.95 41.38 

49 3615 1.10 35.59 

55 3295 1.21 31.77 Z.48-LA100ZLP4E 

61 2981 1.34 28.74 

66 2752 1.45 26.53 

76 2393 1.66 23.07 

84 2173 1.83 20.95 

91 1984 2.01 19.13 

100 1820 2.19 17.55 

108 1677 2.27 16.17 

119 1523 2.44 14.68 

131 1388 2.61 13.38 

143 1271 2.79 12.25 

160 1134 3.04 10.93 

179 1012 3.32 9.76 

211 860 3.70 8.29 

254 716 4.20 6.9 

258 704 3.39 6.79 

289 629 3.80 6.06 

340 534 4.47 5.15 

409 444 5.18 4.28 

81 2248 0.87 21.67 Z.38-LA100ZLP4E 

89 2037 0.96 19.64 

101 1797 1.08 17.33 

3 (60 Hz) 112 1622 1.20 15.64 Z.38-LA100ZLP4E 

123 1471 1.32 14.18 

135 1340 1.45 12.92 

148 1226 1.59 11.82 

166 1096 1.69 10.57 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

180 1006 1.76 9.7 

200 908 1.90 8.75 

233 780 2.16 7.52 

233 778 2.10 7.5 

261 696 2.29 6.71 

284 639 2.35 6.16 

315 576 2.53 5.55 

367 495 2.86 4.77 

128 1423 0.87 13.17 Z.28-LA90ZLB4 

141 1290 0.96 11.94 

155 1174 1.05 10.87 

175 1038 1.19 9.61 

189 958 1.29 8.87 

220 825 1.46 7.64 

242 750 1.56 6.94 

266 682 1.23 6.31 

294 618 1.33 5.72 

322 563 1.45 5.21 

365 497 1.57 4.6 

395 459 1.73 4.25 

459 395 1.79 3.66 

505 360 1.89 3.33 

169 1094 1.86 10.33 E.88-LA100ZLP4E 

185 1002 1.85 9.46 

208 892 2.43 8.42 

228 814 2.66 7.69 

248 749 3.43 7.07 

268 691 3.84 6.53 

289 642 3.86 6.06 

310 598 4.73 5.65 

198 934 1.42 8.82 E.68-LA100ZLP4E 

221 839 1.79 7.92 

242 766 1.73 7.23 

273 680 2.21 6.42 

296 627 2.68 5.92 

326 568 3.43 5.36 

355 522 3.81 4.93 

384 483 4.03 4.56 

413 449 4.53 4.24 

468 396 5.14 3.74 

507 365 5.81 3.45 

250 741 1.16 7 E.48-LA100ZLP4E 

276 670 1.52 6.33 

299 619 1.71 5.85 

344 538 1.97 5.08 

379 489 2.35 4.62 

416 446 2.98 4.21 

452 410 3.45 3.87 

492 377 3.28 3.56 

540 343 3.87 3.24 

3 (60 Hz) 593 312 4.82 2.95 E.48-LA100ZLP4E 

648 286 4.95 2.7 

3 - 33




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

726 255 5.20 2.41 

814 228 5.24 2.15 

956 194 5.25 1.83 

1151 161 5.49 1.52 

338 548 1.13 5.18 E.38-LA100ZLP4E 

382 485 1.42 4.58 

422 439 1.25 4.15 

477 389 1.59 3.67 

529 350 1.64 3.31 

583 318 2.23 3 

641 289 2.45 2.73 

700 265 2.44 2.5 

781 237 2.69 2.24 

854 217 3.26 2.05 

946 196 3.70 1.85 

1101 168 3.78 1.59 

4 (60 Hz) 1.2 188006 0.94 1477 D.188-Z48-LA100ZLD4E 

1.4 159748 1.11 1255 

1.7 132890 1.33 1044 

1.4 159238 1.11 1251 D.188-Z68-LA100ZLD4E 

1.7 133653 1.32 1050 

2.0 114051 1.55 896 

2.3 94958 1.86 746 

1.7 133144 0.93 1046 D.168-Z68-LA100ZLD4E 

2.0 110869 1.12 871 

2.4 91903 1.35 722 

2.7 81083 1.53 637 

3.2 69245 1.79 544 

3.9 57662 2.15 453 

2.8 80319 0.88 631 D.148-Z48-LA100ZLD4E 

2.7 81592 0.87 641 

3.1 71664 0.99 563 

3.7 60844 1.16 478 

4.4 50661 1.40 398 

5.2 45514 1.56 336.11 D.148-LA100ZLD4E 

5.8 40806 1.73 301.34 

6.3 37405 1.89 276.23 

6.9 34490 2.05 254.7 

7.4 31964 2.21 236.05 

4.3 51297 0.88 403 D.128-Z48-LA100ZLD4E 

5.1 43533 1.04 342 

6.1 36277 1.24 285 

6.5 36313 1.24 268.16 D.128-LA100ZLD4E 

3 - 34 

7.1 33302 1.35 245.93 

8.0 29753 1.52 219.72 

8.7 27248 1.66 201.22 

9.4 25100 1.80 185.36 

10.2 23240 1.94 171.62 

11.0 21612 2.09 159.6 

11.7 20175 2.24 148.99 

7.4 31848 0.86 235.19 D.108-LA100ZLD4E 

8.4 28330 0.97 209.21 

9.2 25892 1.06 191.21 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

4 (60 Hz) 10.0 23803 1.15 175.78 D.108-LA100ZLD4E 

10.8 21991 1.25 162.4 

11.6 20407 1.34 150.7 

12.5 19008 1.44 140.37 

13.8 17184 1.60 126.9 

15.0 15820 1.73 116.83 

16.7 14229 1.93 105.08 

18.1 13127 2.09 96.94 

21 11123 2.47 82.14 

30 8166 2.57 59.05 Z.108-LA100ZLD4E 

15 16185 0.92 119.52 D.88-LA100ZLD4E 

16 14969 0.99 110.54 

17 13895 1.07 102.61 

19 12259 1.21 90.53 

21 11318 1.31 83.58 

23 10140 1.47 74.88 

25 9350 1.59 69.05 

30 7845 1.89 57.93 

34 7016 1.85 50.73 Z.88-LA100ZLD4E 

38 6328 2.35 45.76 

42 5795 2.57 41.9 

47 5154 2.88 37.27 

29 8113 0.87 59.91 D.68-LA100ZLD4E 

33 7241 0.98 53.47 

42 5817 1.22 42.06 Z.68-LA100ZLD4E 

46 5222 1.36 37.76 

51 4770 1.48 34.49 

57 4232 1.67 30.6 

62 3907 1.81 28.25 

68 3533 2.00 25.55 

74 3254 2.18 23.53 

80 3009 2.35 21.76 

87 2794 2.53 20.2 

98 2464 2.87 17.82 

106 2275 3.11 16.45 

119 2038 3.47 14.74 

129 1879 3.77 13.59 

295 820 8.47 5.93 

55 4394 0.91 31.77 Z.48-LA100ZLD4E 

61 3975 1.00 28.74 

66 3669 1.09 26.53 

76 3190 1.25 23.07 

84 2897 1.37 20.95 

91 2646 1.50 19.13 

100 2427 1.64 17.55 

108 2236 1.70 16.17 

119 2030 1.83 14.68 

131 1850 1.96 13.38 

143 1694 2.09 12.25 

160 1512 2.28 10.93 

179 1350 2.49 9.76 

211 1146 2.78 8.29 

3 - 35




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

254 954 3.15 6.9 

258 939 2.54 6.79 

289 838 2.85 6.06 

4 (60 Hz) 340 712 3.35 5.15 Z.48-LA100ZLD4E 

409 592 3.89 4.28 

112 2163 0.90 15.64 Z.38-LA100ZLD4E 

123 1961 0.99 14.18 

135 1787 1.09 12.92 

148 1635 1.19 11.82 

166 1462 1.27 10.57 

180 1341 1.32 9.7 

200 1210 1.43 8.75 

233 1040 1.62 7.52 

233 1037 1.58 7.5 

261 928 1.72 6.71 

284 852 1.77 6.16 

315 768 1.90 5.55 

367 660 2.15 4.77 

182 1329 0.93 9.61 Z.28-LA100ZLD4E 

197 1227 1.01 8.87 

229 1057 1.14 7.64 

252 960 1.22 6.94 

277 873 0.96 6.31 

306 791 1.04 5.72 

336 721 1.13 5.21 

380 636 1.22 4.6 

412 588 1.35 4.25 

478 506 1.40 3.66 

526 461 1.48 3.33 

173 1432 3.36 10.14 E.128-LA100ZLD4E 

3 - 36 

186 1327 3.89 9.4 

196 1262 4.49 8.94 

169 1458 1.40 10.33 E.88-LA100ZLD4E 

185 1336 1.39 9.46 

208 1189 1.82 8.42 

228 1086 2.00 7.69 

248 998 2.57 7.07 

268 922 2.88 6.53 

289 856 2.90 6.06 

310 798 3.55 5.65 

342 721 4.54 5.11 

372 664 5.13 4.7 

198 1245 1.07 8.82 E.68-LA100ZLD4E 

221 1118 1.35 7.92 

242 1021 1.30 7.23 

273 906 1.66 6.42 

296 836 2.01 5.92 

326 757 2.57 5.36 

355 696 2.86 4.93 

384 644 3.02 4.56 

413 599 3.40 4.24 

468 528 3.85 3.74 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

507 487 4.36 3.45 

566 436 5.07 3.09 

614 402 5.50 2.85 

732 337 6.03 2.39 

858 288 6.45 2.04 

1029 240 6.45 1.7 

4 (60 Hz) 250 988 0.87 7 E.48-LA100ZLD4E 

276 894 1.14 6.33 

299 826 1.28 5.85 

344 717 1.48 5.08 

379 652 1.76 4.62 

416 594 2.23 4.21 

452 546 2.59 3.87 

492 503 2.46 3.56 

540 457 2.90 3.24 

593 416 3.61 2.95 

648 381 3.71 2.7 

726 340 3.90 2.41 

814 304 3.93 2.15 

956 258 3.94 1.83 

1151 215 4.12 1.52 

338 731 0.85 5.18 E.38-LA100ZLD4E 

382 647 1.07 4.58 

422 586 0.94 4.15 

477 518 1.19 3.67 

529 467 1.23 3.31 

583 424 1.67 3 

641 385 1.83 2.73 

700 353 1.83 2.5 

781 316 2.01 2.24 

854 289 2.44 2.05 

946 261 2.78 1.85 

1101 224 2.84 1.59 

5.5 (60 Hz) 1.7 183250 0.97 1050 D.188-Z68-LA112ZMP4E 

2.0 156373 1.13 896 

2.4 130195 1.36 746 

2.8 108030 1.64 619 

3.2 95290 1.86 546 

1.7 182203 0.97 1044 D.188-Z48-LA112ZMP4E 

2.0 152010 0.81 871 D.168-Z68-LA112ZMP4E 

2.4 126006 0.98 722 

2.8 111172 1.11 637 

3.2 94941 1.30 544 

3.9 79059 1.57 453 

4.7 65621 1.89 376 

3.7 83422 0.85 478 D.148-Z48-LA112ZMP4E 

4.4 69460 1.02 398 

5.2 62403 1.13 336.11 D.148-LA112ZMP4E 

5.8 55948 1.27 301.34 

6.4 51286 1.38 276.23 

6.9 47288 1.50 254.7 

7.4 43826 1.62 236.05 

7.8 41668 1.70 224.43 

3 - 37



P Motor 

[hp] 

3 - 38 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

8.4 38945 1.82 209.76 

9.5 34353 2.06 185.03 

10.1 32404 2.18 174.53 

6.2 49739 0.91 285 D.128-Z48-LA112ZMP4E 

6.5 49787 0.91 268.16 D.128-LA112ZMP4E 

7.1 45660 0.99 245.93 

8.0 40794 1.11 219.72 

8.7 37359 1.21 201.22 

5.5 (60 Hz) 9.5 34415 1.31 185.36 D.128-LA112ZMP4E 

10.2 31864 1.42 171.62 

11.0 29632 1.52 159.6 

11.8 27662 1.63 148.99 

13.2 24749 1.82 133.3 

14.2 22935 1.97 123.53 

15.5 21025 2.15 113.24 

16.9 19272 2.34 103.8 

10.0 32636 0.84 175.78 D.108-LA112ZMP4E 

10.8 30152 0.91 162.4 

11.6 27979 0.98 150.7 

12.5 26062 1.05 140.37 

13.8 23561 1.16 126.9 

15.0 21691 1.26 116.83 

16.7 19510 1.41 105.08 

18.1 17998 1.52 96.94 

21 15250 1.80 82.14 

25 13292 2.06 71.59 

29 11307 2.43 60.9 

30 11197 1.87 59.05 Z.108-LA112ZMP4E 

32 10268 1.99 54.15 

19 16808 0.88 90.53 D.88-LA112ZMP4E 

21 15518 0.96 83.58 

23 13902 1.07 74.88 

25 12820 1.16 69.05 

30 10755 1.38 57.93 

38 8677 1.71 45.76 Z.88-LA112ZMP4E 

42 7945 1.87 41.9 

47 7067 2.10 37.27 

52 6460 2.30 34.07 

56 5939 2.50 31.32 

61 5486 2.71 28.93 

65 5091 2.92 26.85 

70 4742 3.13 25.01 

46 7160 0.99 37.76 Z.68-LA112ZMP4E 

51 6540 1.08 34.49 

57 5802 1.22 30.6 

62 5357 1.32 28.25 

69 4845 1.46 25.55 

75 4462 1.59 23.53 

81 4126 1.72 21.76 

87 3830 1.85 20.2 

98 3379 2.09 17.82 

107 3119 2.27 16.45 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

119 2795 2.53 14.74 

129 2577 2.75 13.59 

154 2162 3.21 11.4 

180 1845 3.57 9.73 

216 1538 4.03 8.11 

261 1274 4.51 6.72 

296 1124 3.86 5.93 

347 959 4.43 5.06 

416 800 5.20 4.22 

503 662 5.62 3.49 

76 4374 0.91 23.07 Z.48-LA112ZMP4E 

5.5 (60 Hz) 84 3972 1.00 20.95 Z.48-LA112ZMP4E 

92 3627 1.10 19.13 

100 3328 1.20 17.55 

109 3066 1.24 16.17 

120 2784 1.33 14.68 

131 2537 1.43 13.38 

143 2323 1.52 12.25 

161 2072 1.66 10.93 

180 1851 1.82 9.76 

212 1572 2.03 8.29 

254 1308 2.30 6.9 

258 1287 1.85 6.79 

290 1149 2.08 6.06 

341 977 2.45 5.15 

410 812 2.83 4.28 

148 2241 0.87 11.82 Z.38-LA112ZMP4E 

166 2004 0.93 10.57 

181 1839 0.96 9.7 

201 1659 1.04 8.75 

233 1426 1.18 7.52 

234 1422 1.15 7.5 

262 1272 1.25 6.71 

285 1168 1.29 6.16 

316 1052 1.39 5.55 

368 904 1.56 4.77 

173 1963 2.45 10.14 E.128-LA112ZMP4E 

187 1820 2.84 9.4 

196 1730 3.27 8.94 

210 1616 3.90 8.35 

170 2000 1.02 10.33 E.88-LA112ZMP4E 

186 1831 1.01 9.46 

208 1630 1.33 8.42 

228 1489 1.46 7.69 

248 1368 1.87 7.07 

269 1264 2.10 6.53 

290 1173 2.11 6.06 

311 1094 2.59 5.65 

343 989 3.31 5.11 

373 910 3.74 4.7 

415 819 4.32 4.23 

450 755 4.51 3.9 

3 - 39



P Motor 

[hp] 

3 - 40 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

222 1533 0.98 7.92 E.68-LA112ZMP4E 

243 1399 0.95 7.23 

273 1243 1.21 6.42 

296 1146 1.47 5.92 

327 1038 1.88 5.36 

356 954 2.09 4.93 

385 883 2.20 4.56 

414 821 2.48 4.24 

469 724 2.81 3.74 

509 668 3.18 3.45 

568 598 3.70 3.09 

616 552 4.01 2.85 

734 463 4.40 2.39 

860 395 4.71 2.04 

5.5 (60 Hz) 1032 329 4.70 1.7 E.68-LA112ZMP4E 

277 1225 0.83 6.33 E.48-LA112ZMP4E 

300 1132 0.94 5.85 

345 983 1.08 5.08 

380 894 1.29 4.62 

417 815 1.63 4.21 

453 749 1.89 3.87 

493 689 1.80 3.56 

542 627 2.12 3.24 

595 571 2.63 2.95 

650 523 2.71 2.7 

728 466 2.84 2.41 

816 416 2.87 2.15 

959 354 2.87 1.83 

1155 294 3.00 1.52 

478 710 0.87 3.67 E.38-LA112ZMP4E 

530 641 0.90 3.31 

585 581 1.22 3 

643 528 1.34 2.73 

783 434 1.49 2.24 

856 397 1.61 2.05 

949 358 1.97 1.85 

1104 308 2.36 1.59 

7.5 (60 Hz) 2.0 212630 0.83 896 D.188-Z68-LA132SP4E 

2.4 177034 1.00 746 

2.8 146895 1.20 619 

3.2 129572 1.37 546 

3.8 110587 1.60 466 

4.5 92077 1.92 388 

3.2 129097 0.96 544 D.168-Z68-LA132SP4E 

3.9 107502 1.15 453 

4.7 89229 1.39 376 

5.2 86242 1.44 341.61 D.168-LA132SP4E 

5.6 79123 1.57 313.41 

6.1 73018 1.70 289.23 

6.6 67732 1.83 268.29 

7.0 63892 1.94 253.08 

7.4 59762 2.07 236.72 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

5.8 76076 0.93 301.34 D.148-LA132SP4E 

6.4 69737 1.02 276.23 

6.9 64301 1.10 254.7 

7.5 59593 1.19 236.05 

7.8 56659 1.25 224.43 

8.4 52956 1.34 209.76 

9.5 46712 1.52 185.03 

10.1 44062 1.61 174.53 

11.3 39479 1.79 156.38 

12.2 36452 1.94 144.39 

14.3 31146 2.27 123.37 

8.7 50800 0.89 201.22 D.128-LA132SP4E 

9.5 46796 0.96 185.36 

10.3 43327 1.04 171.62 

11.0 40292 1.12 159.6 

11.8 37614 1.20 148.99 

13.2 33653 1.34 133.3 

7.5 (60 Hz) 14.2 31186 1.45 123.53 D.128-LA132SP4E 

15.5 28588 1.58 113.24 

17.0 26205 1.72 103.8 

19.9 22332 2.02 88.46 

23 19707 2.29 78.06 

40 11393 2.54 44.19 Z.128-LA132SP4E 

43 10561 2.68 40.96 

13.9 32037 0.86 126.9 D.108-LA132SP4E 

15.1 29495 0.93 116.83 

16.7 26528 1.03 105.08 

18.2 24473 1.12 96.94 

21 20737 1.32 82.14 

25 18073 1.52 71.59 

29 15375 1.78 60.9 

36 12474 2.20 48.38 Z.108-LA132SP4E 

40 11424 2.40 44.31 

43 10525 2.61 40.82 

47 9743 2.82 37.79 

25 17432 0.85 69.05 D.88-LA132SP4E 

30 14625 1.02 57.93 

36 12476 1.19 49.42 

43 10399 1.43 41.19 

47 9609 1.55 37.27 Z.88-LA132SP4E 

52 8784 1.69 34.07 

56 8075 1.84 31.32 

61 7459 1.99 28.93 

66 6923 2.15 26.85 

70 6448 2.31 25.01 

78 5830 2.55 22.61 

85 5365 2.77 20.81 

94 4827 3.08 18.72 

102 4453 3.34 17.27 

120 3772 3.80 14.63 

58 7890 0.90 30.6 Z.68-LA132SP4E 

62 7284 0.97 28.25 

3 - 41




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

69 6588 1.07 25.55 

75 6067 1.17 23.53 

81 5610 1.26 21.76 

87 5208 1.36 20.2 

99 4595 1.54 17.82 

107 4241 1.67 16.45 

119 3800 1.86 14.74 

130 3504 2.02 13.59 

154 2939 2.36 11.4 

181 2509 2.63 9.73 

217 2091 2.96 8.11 

262 1733 3.32 6.72 

297 1529 2.84 5.93 

348 1305 3.26 5.06 

417 1088 3.82 4.22 

504 900 4.13 3.49 

100 4525 0.88 17.55 Z.48-LA132SP4E 

109 4169 0.91 16.17 

120 3785 0.98 14.68 

132 3450 1.05 13.38 

7.5 (60 Hz) 144 3158 1.12 12.25 Z.48-LA132SP4E 

161 2818 1.22 10.93 

180 2516 1.34 9.76 

212 2137 1.49 8.29 

255 1779 1.69 6.9 

259 1751 1.36 6.79 

290 1562 1.53 6.06 

342 1328 1.80 5.15 

411 1104 2.08 4.28 

129 3598 1.48 13.67 E.148-LA132SP4E 

3 - 42 

140 3301 1.61 12.54 

152 3045 1.98 11.57 

164 2824 2.38 10.73 

174 2666 2.65 10.13 

186 2493 3.27 9.47 

209 2216 3.99 8.42 

221 2092 4.48 7.95 

174 2669 1.80 10.14 E.128-LA132SP4E 

187 2474 2.09 9.4 

197 2353 2.41 8.94 

211 2198 2.87 8.35 

239 1940 3.72 7.37 

253 1829 4.26 6.95 

283 1640 5.01 6.23 

322 1437 4.06 5.46 E.108-LA132SP4E 

352 1316 4.57 5 

468 990 6.44 3.76 

209 2216 0.98 8.42 E.88-LA132SP4E 

229 2024 1.07 7.69 

249 1861 1.38 7.07 

270 1719 1.54 6.53 

290 1595 1.55 6.06 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

312 1487 1.90 5.65 

344 1345 2.43 5.11 

374 1237 2.75 4.7 

416 1113 3.18 4.23 

451 1026 3.32 3.9 

533 869 4.58 3.3 

611 758 5.08 2.88 

718 645 5.76 2.45 

274 1690 0.89 6.42 E.68-LA132SP4E 

297 1558 1.08 5.92 

328 1411 1.38 5.36 

357 1298 1.53 4.93 

386 1200 1.62 4.56 

415 1116 1.82 4.24 

471 984 2.07 3.74 

510 908 2.34 3.45 

570 813 2.72 3.09 

618 750 2.95 2.85 

736 629 3.24 2.39 

863 537 3.46 2.04 

1035 447 3.46 1.7 

381 1216 0.95 4.62 E.48-LA132SP4E 

418 1108 1.20 4.21 

7.5 (60 Hz) 455 1019 1.39 3.87 E.48-LA132SP4E 

494 937 1.32 3.56 

543 853 1.56 3.24 

597 776 1.94 2.95 

652 711 1.99 2.7 

730 634 2.09 2.41 

819 566 2.11 2.15 

962 482 2.11 1.83 

1158 400 2.21 1.52 

10 (60 Hz) 2.8 195860 0.90 619 D.188-Z68-LA132ZMP4E 

3.2 172762 1.02 546 

3.8 147449 1.20 466 

4.5 122769 1.44 388 

5.5 101885 1.74 322 

7.2 82072 2.16 243.82 D.188-LA132ZMP4E 

3.9 143336 0.86 453 D.168-Z68-LA132ZMP4E 

4.7 118972 1.04 376 

5.2 114990 1.08 341.61 D.168-LA132ZMP4E 

5.6 105497 1.17 313.41 

6.1 97358 1.27 289.23 

6.6 90309 1.37 268.29 

7.0 85189 1.45 253.08 

7.4 79683 1.55 236.72 

8.4 70853 1.75 210.49 

8.9 66888 1.85 198.71 

9.9 60045 2.06 178.38 

10.8 55110 2.25 163.72 

7.5 79457 0.89 236.05 D.148-LA132ZMP4E 

7.8 75546 0.94 224.43 

8.4 70607 1.00 209.76 

3 - 43



P Motor 

[hp] 

3 - 44 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

9.5 62283 1.14 185.03 

10.1 58749 1.20 174.53 

11.3 52639 1.34 156.38 

12.2 48603 1.46 144.39 

14.3 41528 1.70 123.37 

15.8 37532 1.89 111.5 

16.4 36159 1.96 107.42 

18.9 31275 2.26 92.91 

22 27279 2.59 81.04 

31 19767 2.09 57.5 Z.148-LA132ZMP4E 

11.8 50152 0.90 148.99 D.128-LA132ZMP4E 

13.2 44870 1.01 133.3 

14.2 41582 1.09 123.53 

15.5 38118 1.18 113.24 

17.0 34940 1.29 103.8 

19.9 29777 1.52 88.46 

23 26276 1.72 78.06 

26 22361 2.02 66.43 

31 19375 2.33 57.56 

36 16305 2.77 48.44 

40 15191 1.91 44.19 Z.128-LA132ZMP4E 

43 14081 2.01 40.96 

21 27649 0.99 82.14 D.108-LA132ZMP4E 

25 24098 1.14 71.59 

29 20500 1.34 60.9 

10 (60 Hz) 36 16632 1.65 48.38 Z.108-LA132ZMP4E 

40 15233 1.80 44.31 

43 14033 1.95 40.82 

47 12991 2.11 37.79 

50 12080 2.27 35.14 

54 11279 2.43 32.81 

60 10090 2.72 29.35 

65 9351 2.93 27.2 

71 8574 3.20 24.94 

36 16635 0.89 49.42 D.88-LA132ZMP4E 

43 13865 1.07 41.19 

47 12812 1.16 37.27 Z.88-LA132ZMP4E 

52 11712 1.27 34.07 

56 10767 1.38 31.32 

61 9945 1.49 28.93 

66 9230 1.61 26.85 

70 8598 1.73 25.01 

78 7773 1.91 22.61 

85 7154 2.08 20.81 

94 6435 2.31 18.72 

102 5937 2.50 17.27 

120 5029 2.85 14.63 

138 4383 3.13 12.75 

162 3730 3.49 10.85 

190 3183 3.86 9.26 

232 2609 4.41 7.59 

253 2393 4.66 6.96 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

296 2042 5.16 5.94 

396 1530 6.42 4.45 

464 1303 5.43 3.79 

566 1069 6.12 3.11 

75 8089 0.88 23.53 Z.68-LA132ZMP4E 

81 7480 0.95 21.76 

87 6944 1.02 20.2 

99 6126 1.16 17.82 

107 5655 1.25 16.45 

119 5067 1.40 14.74 

130 4672 1.52 13.59 

154 3919 1.77 11.4 

181 3345 1.97 9.73 

217 2788 2.22 8.11 

262 2310 2.49 6.72 

297 2039 2.13 5.93 

348 1739 2.44 5.06 

417 1451 2.87 4.22 

504 1200 3.10 3.49 

144 4211 0.84 12.25 Z.48-LA132ZMP4E 

161 3757 0.92 10.93 

180 3355 1.00 9.76 

212 2850 1.12 8.29 

255 2372 1.27 6.9 

259 2334 1.02 6.79 

290 2083 1.15 6.06 

342 1770 1.35 5.15 

411 1471 1.56 4.28 

10 (60 Hz) 129 4797 1.11 13.67 E.148-LA132ZMP4E 

140 4401 1.21 12.54 

152 4060 1.48 11.57 

164 3766 1.79 10.73 

174 3555 1.99 10.13 

186 3323 2.45 9.47 

209 2955 2.99 8.42 

221 2790 3.36 7.95 

246 2506 3.95 7.14 

269 2299 4.43 6.55 

174 3558 1.35 10.14 E.128-LA132ZMP4E 

187 3299 1.57 9.4 

197 3137 1.80 8.94 

211 2930 2.15 8.35 

239 2586 2.79 7.37 

253 2439 3.19 6.95 

283 2186 3.76 6.23 

306 2018 4.21 5.75 

358 1723 4.93 4.91 

322 1916 3.05 5.46 E.108-LA132ZMP4E 

352 1755 3.43 5 

413 1495 4.26 4.26 

468 1320 4.02 3.76 

550 1123 5.87 3.2 

3 - 45



P Motor 

[hp] 

3 - 46 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

635 972 6.10 2.77 

249 2481 1.03 7.07 E.88-LA132ZMP4E 

270 2292 1.16 6.53 

290 2127 1.16 6.06 

312 1983 1.43 5.65 

344 1793 1.83 5.11 

374 1649 2.07 4.7 

416 1484 2.38 4.23 

451 1369 2.49 3.9 

533 1158 3.44 3.3 

611 1011 3.81 2.88 

718 860 4.32 2.45 

842 733 5.07 2.09 

1029 600 5.23 1.71 

328 1881 1.03 5.36 E.68-LA132ZMP4E 

357 1730 1.15 4.93 

386 1600 1.22 4.56 

415 1488 1.37 4.24 

471 1312 1.55 3.74 

510 1211 1.75 3.45 

570 1084 2.04 3.09 

618 1000 2.21 2.85 

736 839 2.43 2.39 

863 716 2.60 2.04 

1035 597 2.59 1.7 

418 1477 0.90 4.21 E.48-LA132ZMP4E 

455 1358 1.04 3.87 

494 1249 0.99 3.56 

543 1137 1.17 3.24 

597 1035 1.45 2.95 

652 948 1.49 2.7 

10 (60 Hz) 730 846 1.57 2.41 E.48-LA132ZMP4E 

819 755 1.58 2.15 

962 642 1.58 1.83 

1158 533 1.66 1.52 

12.3 (60 Hz) 3.7 182921 0.97 466 D.188-Z68-LA132ZMP4 

4.5 152304 1.16 388 

5.4 126396 1.40 322 

7.2 101817 1.74 243.82 D.188-LA132ZMP4 

7.9 91941 1.92 220.17 

8.5 86166 2.05 206.34 

4.6 147593 0.84 376 D.168-Z68-LA132ZMP4 

5.1 142653 0.87 341.61 D.168-LA132ZMP4 

5.6 130877 0.95 313.41 

6.0 120780 1.03 289.23 

6.5 112035 1.11 268.29 

6.9 105684 1.17 253.08 

7.4 98852 1.25 236.72 

8.3 87899 1.41 210.49 

8.8 82979 1.49 198.71 

9.8 74490 1.66 178.38 

10.7 68368 1.81 163.72 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

12.4 58997 2.10 141.28 

14.1 51610 2.40 123.59 

9.4 77267 0.92 185.03 D.148-LA132ZMP4 

10.0 72882 0.97 174.53 

11.2 65303 1.08 156.38 

12.1 60296 1.17 144.39 

14.1 51518 1.37 123.37 

15.7 46561 1.52 111.5 

16.2 44858 1.58 107.42 

18.8 38798 1.82 92.91 

22 33842 2.09 81.04 

25 28964 2.44 69.36 

30 24522 1.68 57.5 Z.148-LA132ZMP4 

14.1 51585 0.87 123.53 D.128-LA132ZMP4 

15.4 47288 0.95 113.24 

16.8 43346 1.04 103.8 

19.7 36940 1.22 88.46 

22 32597 1.38 78.06 

26 27741 1.63 66.43 

30 24036 1.88 57.56 

36 20228 2.23 48.44 

40 18253 2.47 43.71 

39 18846 1.54 44.19 Z.128-LA132ZMP4 

43 17468 1.62 40.96 

45 16607 2.72 38.94 

48 15519 2.91 36.39 

24 29895 0.92 71.59 D.108-LA132ZMP4 

29 25431 1.08 60.9 

36 20633 1.33 48.38 Z.108-LA132ZMP4 

39 18897 1.45 44.31 

43 17409 1.58 40.82 

46 16116 1.70 37.79 

50 14986 1.83 35.14 

53 13993 1.96 32.81 

12.3 (60 Hz) 59 12517 2.19 29.35 Z.108-LA132ZMP4 

64 11600 2.36 27.2 

70 10636 2.58 24.94 

76 9749 2.81 22.86 

90 8308 3.30 19.48 

333 2235 4.51 5.24 

396 1881 5.36 4.41 

438 1697 5.84 3.98 

42 17201 0.86 41.19 D.88-LA132ZMP4 

47 15895 0.94 37.27 Z.88-LA132ZMP4 

51 14530 1.02 34.07 

56 13357 1.11 31.32 

60 12338 1.20 28.93 

65 11451 1.30 26.85 

70 10666 1.39 25.01 

77 9643 1.54 22.61 

84 8875 1.67 20.81 

93 7984 1.86 18.72 

3 - 47



P Motor 

[hp] 

3 - 48 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

101 7365 2.02 17.27 

119 6239 2.30 14.63 

137 5438 2.52 12.75 

161 4627 2.81 10.85 

188 3949 3.11 9.26 

230 3237 3.55 7.59 

251 2968 3.76 6.96 

294 2533 4.16 5.94 

358 2077 4.73 4.87 

392 1898 3.73 4.45 

460 1616 4.05 3.79 

561 1326 4.40 3.11 

98 7600 0.93 17.82 Z.68-LA132ZMP4 

106 7016 1.01 16.45 

118 6286 1.13 14.74 

128 5796 1.22 13.59 

153 4862 1.43 11.4 

179 4150 1.59 9.73 

215 3459 1.79 8.11 

260 2866 2.01 6.72 

294 2529 1.71 5.93 

345 2158 1.97 5.06 

414 1800 2.31 4.22 

500 1488 2.50 3.49 

210 3535 0.90 8.29 Z.48-LA132ZMP4 

253 2943 1.02 6.9 

288 2584 0.92 6.06 

339 2196 1.09 5.15 

408 1825 1.31 4.28 

128 5951 0.89 13.67 E.148-LA132ZMP4 

139 5459 0.97 12.54 

151 5037 1.19 11.57 

163 4671 1.44 10.73 

172 4410 1.60 10.13 

184 4123 1.97 9.47 

207 3666 2.41 8.42 

219 3461 2.71 7.95 

12.3 (60 Hz) 244 3108 3.19 7.14 E.148-LA132ZMP4 

266 2852 3.57 6.55 

309 2460 4.89 5.65 

172 4415 1.09 10.14 E.128-LA132ZMP4 

186 4092 1.26 9.4 

195 3892 1.45 8.94 

209 3635 1.73 8.35 

237 3209 2.25 7.37 

251 3026 2.57 6.95 

280 2712 3.03 6.23 

303 2503 3.39 5.75 

355 2138 3.97 4.91 

393 1933 4.58 4.44 

408 1863 4.75 4.28 

472 1611 5.49 3.7 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

320 2377 2.46 5.46 E.108-LA132ZMP4 

349 2177 2.76 5 

410 1855 3.43 4.26 

464 1637 3.24 3.76 

545 1393 4.73 3.2 

630 1206 4.92 2.77 

749 1014 5.93 2.33 

827 919 5.97 2.11 

964 788 6.18 1.81 

247 3078 0.83 7.07 E.88-LA132ZMP4 

267 2843 0.93 6.53 

288 2638 0.94 6.06 

309 2460 1.15 5.65 

341 2225 1.47 5.11 

371 2046 1.66 4.7 

413 1842 1.92 4.23 

447 1698 2.01 3.9 

529 1437 2.77 3.3 

606 1254 3.07 2.88 

712 1067 3.48 2.45 

835 910 4.08 2.09 

1020 744 4.22 1.71 

326 2334 0.83 5.36 E.68-LA132ZMP4 

354 2146 0.93 4.93 

383 1985 0.98 4.56 

412 1846 1.10 4.24 

467 1628 1.25 3.74 

506 1502 1.41 3.45 

565 1345 1.64 3.09 

612 1241 1.78 2.85 

730 1041 1.96 2.39 

855 888 2.09 2.04 

1026 740 2.09 1.7 

451 1685 0.84 3.87 E.48-LA132ZMP4 

539 1411 0.88 3.24 

592 1284 1.03 2.95 

646 1175 1.28 2.7 

15 (60 Hz) 4.5 183631 0.96 388 D.188-Z68-LA160MP4E 

5.5 152395 1.16 322 

7.2 122760 1.44 243.82 D.188-LA160MP4E 

15 (60 Hz) 8.0 110852 1.60 220.17 D.188-LA160MP4E 

8.6 103889 1.70 206.34 

10.0 89233 1.98 177.23 

11.5 77094 2.30 153.12 

7.0 127422 0.97 253.08 D.168-LA160MP4E 

7.5 119185 1.04 236.72 

8.4 105979 1.17 210.49 

8.9 100048 1.24 198.71 

9.9 89812 1.38 178.38 

10.8 82431 1.50 163.72 

12.5 71132 1.74 141.28 

14.3 62226 1.99 123.59 

16.4 54115 2.29 107.48 

3 - 49



P Motor 

[hp] 

3 - 50 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

11.3 78735 0.90 156.38 D.148-LA160MP4E 

12.2 72698 0.97 144.39 

14.3 62115 1.14 123.37 

15.8 56139 1.26 111.5 

16.4 54084 1.31 107.42 

19.0 46779 1.51 92.91 

22 40802 1.73 81.04 

25 34922 2.03 69.36 

28 31277 2.26 62.12 

33 27890 2.54 54.24 Z.148-LA160MP4E 

35 26090 2.71 50.74 

17 52262 0.86 103.8 D.128-LA160MP4E 

20 44538 1.01 88.46 

23 39302 1.15 78.06 

27 33447 1.35 66.43 

31 28981 1.56 57.56 

36 24389 1.85 48.44 

40 22007 2.05 43.71 

45 20023 2.25 38.94 Z.128-LA160MP4E 

49 18712 2.41 36.39 

55 16511 2.73 32.11 

58 15570 2.90 30.28 

29 30662 0.89 60.9 D.108-LA160MP4E 

34 26166 1.05 51.97 

41 21454 1.28 42.61 

50 18069 1.52 35.14 Z.108-LA160MP4E 

54 16871 1.63 32.81 

60 15092 1.82 29.35 

65 13986 1.96 27.2 

71 12824 2.14 24.94 

77 11755 2.33 22.86 

91 10017 2.74 19.48 

103 8839 3.10 17.19 

121 7523 3.65 14.63 

249 3651 7.51 7.1 

275 3296 8.32 6.41 

320 2833 9.68 5.51 

337 2694 10.18 5.24 

400 2268 7.02 4.41 

443 2047 7.61 3.98 

516 1759 8.55 3.42 

66 13806 1.08 26.85 Z.88-LA160MP4E 

15 (60 Hz) 71 12860 1.16 25.01 Z.88-LA160MP4E 

78 11626 1.28 22.61 

85 10700 1.39 20.81 

94 9626 1.54 18.72 

102 8880 1.67 17.27 

121 7523 1.91 14.63 

138 6556 2.09 12.75 

163 5579 2.33 10.85 

191 4761 2.58 9.26 

233 3903 2.95 7.59 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

254 3579 3.11 6.96 

297 3054 3.45 5.94 

362 2504 3.92 4.87 

397 2288 3.09 4.45 

466 1949 3.36 3.79 

568 1599 3.65 3.11 

107 8459 0.84 16.45 Z.68-LA160MP4E 

120 7579 0.93 14.74 

130 6988 1.01 13.59 

155 5862 1.18 11.4 

181 5003 1.32 9.73 

218 4170 1.49 8.11 

263 3455 1.66 6.72 

298 3049 1.42 5.93 

349 2602 1.63 5.06 

418 2170 1.92 4.22 

506 1795 2.07 3.49 

174 5317 1.26 10.13 E.148-LA160MP4E 

186 4971 1.42 9.47 

210 4420 1.84 8.42 

222 4173 2.12 7.95 

247 3748 2.50 7.14 

269 3438 2.88 6.55 

312 2966 3.43 5.65 

357 2593 4.64 4.94 

410 2257 5.49 4.3 

197 4693 1.21 8.94 E.128-LA160MP4E 

211 4383 1.44 8.35 

239 3869 1.87 7.37 

254 3648 2.13 6.95 

283 3270 2.51 6.23 

307 3018 2.81 5.75 

359 2577 3.30 4.91 

398 2331 3.80 4.44 

412 2247 3.94 4.28 

477 1942 4.56 3.7 

546 1695 5.22 3.23 

639 1449 6.11 2.76 

323 2866 2.04 5.46 E.108-LA160MP4E 

353 2625 2.29 5 

414 2236 2.85 4.26 

469 1974 2.69 3.76 

552 1680 3.92 3.2 

637 1454 4.08 2.77 

758 1223 4.92 2.33 

15 (60 Hz) 836 1108 4.95 2.11 E.108-LA160MP4E 

975 950 5.12 1.81 

312 2966 0.95 5.65 E.88-LA160MP4E 

345 2682 1.22 5.11 

376 2467 1.38 4.7 

417 2220 1.59 4.23 

453 2047 1.66 3.9 

3 - 51



P Motor 

[hp] 

3 - 52 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

535 1732 2.30 3.3 

613 1512 2.55 2.88 

720 1286 2.89 2.45 

844 1097 3.39 2.09 

1032 898 3.50 1.71 

387 2394 0.81 4.56 E.68-LA160MP4E 

416 2226 0.91 4.24 

472 1963 1.04 3.74 

512 1811 1.17 3.45 

571 1622 1.36 3.09 

619 1496 1.48 2.85 

738 1255 1.62 2.39 

865 1071 1.74 2.04 

1038 892 1.73 1.7 

20 (60 Hz) 5.5 203193 0.87 322 D.188-Z68-LA160ZLP4E 

7.2 163680 1.08 243.82 D.188-LA160ZLP4E 

8.0 147803 1.20 220.17 

8.6 138519 1.28 206.34 

10.0 118977 1.49 177.23 

11.5 102792 1.72 153.12 

13.1 90735 1.95 135.16 

14.5 81679 2.17 121.67 

8.4 141305 0.88 210.49 D.168-LA160ZLP4E 

8.9 133397 0.93 198.71 

9.9 119749 1.03 178.38 

10.8 109908 1.13 163.72 

12.5 94843 1.31 141.28 

14.3 82968 1.49 123.59 

16.4 72153 1.72 107.48 

22.0 63305 1.96 94.3 

24.0 53537 2.31 79.75 

24.4 48576 2.55 72.36 

38.0 31956 2.80 46.61 Z.168-LA160ZLP4E 

15.8 74852 0.95 111.5 D.148-LA160ZLP4E 

16.4 72113 0.98 107.42 

19.0 62372 1.13 92.91 

22 54403 1.30 81.04 

25 46562 1.52 69.36 

28 41702 1.70 62.12 

33 37187 1.90 54.24 Z.148-LA160ZLP4E 

35 34787 2.03 50.74 

39 30927 2.29 45.11 

41 29200 2.42 42.59 

46 26210 2.70 38.23 

50 24058 2.94 35.09 

27 44595 1.01 66.43 D.128-LA160ZLP4E 

31 38641 1.17 57.56 

36 32518 1.39 48.44 

20 (60 Hz) 40 29343 1.54 43.71 D.128-LA160ZLP4E 

45 26697 1.69 38.94 Z.128-LA160ZLP4E 

49 24949 1.81 36.39 

55 22015 2.05 32.11 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

58 20760 2.17 30.28 

65 18600 2.43 27.13 

70 17174 2.63 25.05 

82 14679 3.07 21.41 

91 13266 3.40 19.35 

95 12780 3.53 18.64 

242 4998 8.84 7.29 

283 4278 10.07 6.24 

41 28605 0.96 42.61 D.108-LA160ZLP4E 

50 24092 1.14 35.14 Z.108-LA160ZLP4E 

54 22494 1.22 32.81 

60 20122 1.36 29.35 

65 18648 1.47 27.2 

71 17099 1.60 24.94 

77 15673 1.75 22.86 

91 13355 2.05 19.48 

103 11785 2.33 17.19 

121 10030 2.73 14.63 

139 8693 3.16 12.68 

165 7315 3.75 10.67 

183 6595 4.16 9.62 

213 5670 4.84 8.27 

249 4868 3.27 7.1 

275 4395 3.54 6.41 

320 3778 3.98 5.51 

337 3593 2.81 5.24 

400 3023 3.34 4.41 

443 2729 3.63 3.98 

516 2345 4.08 3.42 

71 17147 0.87 25.01 Z.88-LA160ZLP4E 

78 15501 0.96 22.61 

85 14267 1.04 20.81 

94 12834 1.16 18.72 

102 11840 1.26 17.27 

121 10030 1.43 14.63 

138 8741 1.57 12.75 

163 7439 1.75 10.85 

191 6349 1.94 9.26 

233 5204 2.21 7.59 

254 4772 2.34 6.96 

297 4072 2.59 5.94 

362 3339 2.94 4.87 

397 3051 2.32 4.45 

466 2598 2.52 3.79 

568 2132 2.74 3.11 

155 7816 0.89 11.4 Z.68-LA160ZLP4E 

181 6671 0.99 9.73 

218 5560 1.11 8.11 

263 4607 1.25 6.72 

298 4066 1.07 5.93 

349 3469 1.22 5.06 

20 (60 Hz) 418 2893 1.44 4.22 Z.68-LA160ZLP4E 

3 - 53



P Motor 

[hp] 

3 - 54 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

506 2393 1.55 3.49 

174 7090 0.95 10.13 E.148-LA160ZLP4E 

186 6628 1.07 9.47 

210 5893 1.38 8.42 

222 5564 1.59 7.95 

247 4997 1.88 7.14 

269 4584 2.16 6.55 

312 3954 2.57 5.65 

357 3457 3.48 4.94 

410 3009 4.12 4.3 

468 2639 4.46 3.77 

553 2233 5.35 3.19 

609 2030 6.76 2.9 

700 1764 7.02 2.52 

197 6257 0.90 8.94 E.128-LA160ZLP4E 

211 5844 1.08 8.35 

239 5158 1.40 7.37 

254 4864 1.60 6.95 

283 4360 1.88 6.23 

307 4024 2.11 5.75 

359 3436 2.47 4.91 

398 3107 2.85 4.44 

412 2995 2.95 4.28 

477 2590 3.42 3.7 

546 2261 3.91 3.23 

639 1932 4.58 2.76 

715 1729 4.86 2.47 

840 1470 5.18 2.1 

975 1267 5.59 1.81 

323 3821 1.53 5.46 E.108-LA160ZLP4E 

353 3499 1.72 5 

414 2981 2.14 4.26 

469 2632 2.02 3.76 

552 2240 2.94 3.2 

637 1939 3.06 2.77 

758 1631 3.69 2.33 

836 1477 3.71 2.11 

975 1267 3.84 1.81 

345 3576 0.92 5.11 E.88-LA160ZLP4E 

376 3289 1.04 4.7 

417 2960 1.20 4.23 

453 2730 1.25 3.9 

535 2310 1.72 3.3 

613 2016 1.91 2.88 

720 1715 2.17 2.45 

844 1463 2.54 2.09 

1032 1197 2.62 1.71 

512 2415 0.88 3.45 E.68-LA160ZLP4E 

571 2163 1.02 3.09 

619 1995 1.11 2.85 

25 (60 Hz) 7.3 204022 0.87 243.82 D.188-LG180ZMB4E 

8.0 184232 0.96 220.17 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

8.6 172660 1.02 206.34 

10.0 148301 1.19 177.23 

25 (60 Hz) 11.6 128127 1.38 153.12 D.188-LG180ZMB4E 

13.1 113098 1.56 135.16 

14.5 101810 1.74 121.67 

17.5 84481 2.09 100.96 

19.2 77033 2.30 92.06 

22 67586 2.62 80.77 

10.8 136996 0.90 163.72 D.168-LG180ZMB4E 

12.5 118219 1.05 141.28 

14.3 103417 1.20 123.59 

16.5 89936 1.38 107.48 

18.8 78908 1.57 94.3 

22 66733 1.86 79.75 

24 60549 2.05 72.36 

28 52784 2.35 63.08 

38 39832 2.24 46.61 Z.168-LG180ZMB4E 

19.1 77745 0.91 92.91 D.148-LG180ZMB4E 

22 67812 1.04 81.04 

26 58039 1.22 69.36 

28 51980 1.36 62.12 

34 44023 1.61 52.61 

39 38550 1.84 45.11 Z.148-LG180ZMB4E 

42 36396 1.94 42.59 

46 32670 2.17 38.23 

50 29987 2.36 35.09 

58 25877 2.74 30.28 

67 22638 3.13 26.49 

31 48165 0.94 57.56 D.128-LG180ZMB4E 

37 40533 1.11 48.44 

40 36575 1.23 43.71 

47 31438 1.44 37.57 

55 27440 1.64 32.11 Z.128-LG180ZMB4E 

58 25877 1.74 30.28 

65 23185 1.95 27.13 

71 21407 2.11 25.05 

83 18296 2.47 21.41 

91 16536 2.73 19.35 

95 15929 2.83 18.64 

110 13776 3.21 16.12 

126 12015 3.58 14.06 

147 10281 4.06 12.03 

243 6230 6.54 7.29 

284 5333 7.34 6.24 

317 4777 7.89 5.59 

366 4128 5.44 4.83 

374 4042 5.54 4.73 

60 25082 1.09 29.35 Z.108-LG180ZMB4E 

65 23244 1.18 27.2 

71 21313 1.29 24.94 

77 19536 1.40 22.86 

91 16647 1.65 19.48 

3 - 55




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

103 14690 1.87 17.19 

121 12502 2.19 14.63 

140 10836 2.53 12.68 

166 9118 3.01 10.67 

184 8221 3.34 9.62 

25 (60 Hz) 214 7067 3.88 8.27 Z.108-LG180ZMB4E 

249 6067 2.62 7.1 

276 5478 2.84 6.41 

321 4709 3.19 5.51 

338 4478 2.25 5.24 

401 3769 2.68 4.41 

445 3401 2.91 3.98 

518 2923 3.27 3.42 

95 15998 0.93 18.72 Z.88-LG180ZMB4E 

3 - 56 

102 14759 1.01 17.27 

121 12502 1.15 14.63 

139 10896 1.26 12.75 

163 9272 1.40 10.85 

191 7913 1.55 9.26 

233 6486 1.77 7.59 

254 5948 1.87 6.96 

298 5076 2.07 5.94 

363 4162 2.36 4.87 

398 3803 1.86 4.45 

467 3239 2.02 3.79 

569 2658 2.20 3.11 

210 7345 1.20 8.42 E.148-LG180ZMB4E 

223 6935 1.35 7.95 

248 6229 1.59 7.14 

270 5714 1.78 6.55 

313 4929 2.44 5.65 

358 4310 2.87 4.94 

412 3751 3.14 4.3 

469 3289 3.63 3.77 

555 2783 4.93 3.19 

610 2530 4.90 2.9 

702 2198 4.91 2.52 

827 1867 5.69 2.14 

1079 1431 5.94 1.64 

240 6429 1.12 7.37 E.128-LG180ZMB4E 

255 6063 1.28 6.95 

284 5435 1.51 6.23 

308 5016 1.69 5.75 

360 4283 1.98 4.91 

399 3873 2.28 4.44 

414 3734 2.37 4.28 

478 3228 2.74 3.7 

548 2818 3.14 3.23 

641 2408 3.67 2.76 

717 2155 3.90 2.47 

843 1832 4.15 2.1 

978 1579 4.48 1.81 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

324 4763 1.23 5.46 E.108-LG180ZMB4E 

354 4362 1.38 5 

415 3716 1.71 4.26 

471 3280 1.62 3.76 

553 2792 2.36 3.2 

639 2416 2.45 2.77 

760 2033 2.96 2.33 

839 1841 2.98 2.11 

25 (60 Hz) 978 1579 3.08 1.81 E.108-LG180ZMB4E 

377 4100 0.83 4.7 E.88-LG180ZMB4E 

418 3690 0.96 4.23 

454 3402 1.00 3.9 

536 2879 1.38 3.3 

615 2512 1.53 2.88 

722 2137 1.74 2.45 

847 1823 2.04 2.09 

1035 1492 2.11 1.71 

30 (60 Hz) 8.6 207192 0.85 206.34 D.188-LG180ZLB4E 

10.0 177961 0.99 177.23 

11.6 153752 1.15 153.12 

13.1 135718 1.30 135.16 

14.5 122172 1.45 121.67 

17.5 101377 1.75 100.96 

19.2 92440 1.91 92.06 

22 81103 2.18 80.77 

26 69696 2.54 69.41 

34 53684 2.59 52.35 Z.188-LG180ZLB4E 

12.5 141863 0.87 141.28 D.168-LG180ZLB4E 

14.3 124100 1.00 123.59 

16.5 107924 1.15 107.48 

18.8 94689 1.31 94.3 

22 80079 1.55 79.75 

24 72659 1.70 72.36 

28 63340 1.96 63.08 

33 53781 2.30 53.56 

38 47798 1.87 46.61 Z.168-LG180ZLB4E 

22 81374 0.87 81.04 D.148-LG180ZLB4E 

26 69646 1.02 69.36 

28 62376 1.13 62.12 

34 52827 1.34 52.61 

39 46260 1.53 45.11 Z.148-LG180ZLB4E 

42 43676 1.62 42.59 

46 39205 1.81 38.23 

50 35984 1.97 35.09 

58 31052 2.28 30.28 

67 27165 2.61 26.49 

77 23627 3.00 23.04 

88 20725 3.42 20.21 

37 48640 0.93 48.44 D.128-LG180ZLB4E 

40 43890 1.03 43.71 

47 37725 1.20 37.57 

55 32929 1.37 32.11 Z.128-LG180ZLB4E 

3 - 57




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

58 31052 1.45 30.28 

65 27822 1.62 27.13 

71 25689 1.76 25.05 

83 21956 2.06 21.41 

91 19843 2.27 19.35 

95 19115 2.36 18.64 

110 16531 2.67 16.12 

126 14418 2.99 14.06 

147 12337 3.38 12.03 

164 11055 3.68 10.78 

194 9363 4.18 9.13 

30 (60 Hz) 225 8081 4.66 7.88 Z.128-LG180ZLB4E 

243 7476 3.01 7.29 

284 6399 3.50 6.24 

317 5732 6.03 5.59 

366 4953 4.66 4.83 

374 4851 4.58 4.73 

433 4194 5.01 4.09 

488 3723 5.61 3.63 

60 30098 0.91 29.35 Z.108-LG180ZLB4E 

3 - 58 

65 27893 0.98 27.2 

71 25576 1.07 24.94 

77 23443 1.17 22.86 

91 19977 1.37 19.48 

103 17628 1.56 17.19 

121 15003 1.83 14.63 

140 13003 2.11 12.68 

166 10942 2.51 10.67 

184 9865 2.78 9.62 

214 8481 3.23 8.27 

249 7281 2.19 7.1 

276 6573 2.37 6.41 

321 5650 2.66 5.51 

338 5374 1.88 5.24 

401 4522 2.23 4.41 

445 4081 2.43 3.98 

518 3507 2.72 3.42 

102 17710 0.84 17.27 Z.88-LG180ZLB4E 

121 15003 0.96 14.63 

139 13075 1.05 12.75 

163 11127 1.17 10.85 

191 9496 1.30 9.26 

233 7783 1.48 7.59 

254 7137 1.56 6.96 

298 6091 1.73 5.94 

363 4994 1.97 4.87 

398 4563 1.55 4.45 

467 3887 1.68 3.79 

569 3189 1.83 3.11 

210 8815 1.00 8.42 E.148-LG180ZLB4E 

223 8323 1.13 7.95 

248 7475 1.33 7.14 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

270 6857 1.48 6.55 

313 5915 2.03 5.65 

358 5171 2.40 4.94 

412 4501 2.61 4.3 

469 3947 3.03 3.77 

555 3339 4.11 3.19 

610 3036 4.08 2.9 

702 2638 4.09 2.52 

827 2240 4.74 2.14 

1079 1717 4.95 1.64 

240 7715 0.94 7.37 E.128-LG180ZLB4E 

255 7276 1.07 6.95 

284 6522 1.26 6.23 

308 6019 1.41 5.75 

30 (60 Hz) 360 5140 1.65 4.91 E.128-LG180ZLB4E 

399 4648 1.90 4.44 

414 4481 1.97 4.28 

478 3873 2.28 3.7 

548 3381 2.62 3.23 

641 2889 3.06 2.76 

717 2586 3.25 2.47 

843 2198 3.46 2.1 

978 1895 3.74 1.81 

324 5716 1.02 5.46 E.108-LG180ZLB4E 

354 5234 1.15 5 

415 4460 1.43 4.26 

471 3936 1.35 3.76 

553 3350 1.97 3.2 

639 2900 2.04 2.77 

760 2439 2.47 2.33 

839 2209 2.48 2.11 

978 1895 2.57 1.81 

454 4083 0.83 3.9 E.88-LG180ZLB4E 

536 3455 1.15 3.3 

615 3015 1.28 2.88 

847 2188 1.70 2.09 

1035 1790 2.08 1.71 

40 (60 Hz) 11.6 205003 0.86 153.12 D.188-LG200LB4E 

13.1 180957 0.98 135.16 

14.5 162896 1.09 121.67 

17.5 135169 1.31 100.96 

19.2 123253 1.44 92.06 

22 108138 1.64 80.77 

26 92929 1.90 69.41 

33 72377 2.44 54.06 

34 71579 1.94 52.35 Z.188-LG200LB4E 

37 65932 2.14 48.22 

42 57222 2.49 41.85 

48 50441 2.91 36.89 

16.5 143898 0.86 107.48 D.168-LG200LB4E 

18.8 126252 0.98 94.3 

22 106772 1.16 79.75 

3 - 59



P Motor 

[hp] 

3 - 60 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

24 96878 1.28 72.36 

28 84454 1.47 63.08 

33 71708 1.73 53.56 

38 63731 1.40 46.61 Z.168-LG200LB4E 

42 57551 2.15 42.09 

45 53941 2.30 39.45 

52 46325 2.67 33.88 

60 40022 3.10 29.27 

28 83169 0.85 62.12 D.148-LG200LB4E 

34 70436 1.00 52.61 

39 61680 1.15 45.11 Z.148-LG200LB4E 

42 58234 1.22 42.59 

46 52273 1.35 38.23 

50 47979 1.48 35.09 

58 41403 1.71 30.28 

67 36220 1.95 26.49 

77 31503 2.25 23.04 

40 (60 Hz) 88 27634 2.56 20.21 Z.148-LG200LB4E 

104 23368 3.03 17.09 

114 21207 3.34 15.51 

131 18486 3.83 13.52 

205 11814 5.99 8.64 

226 10720 6.60 7.84 

234 10351 4.10 7.57 

259 9352 4.54 6.84 

305 7930 6.25 5.8 

399 6071 7.00 4.44 

47 50300 0.90 37.57 D.128-LG200LB4E 

55 43905 1.03 32.11 Z.128-LG200LB4E 

58 41403 1.09 30.28 

65 37095 1.22 27.13 

71 34251 1.32 25.05 

83 29274 1.54 21.41 

91 26458 1.71 19.35 

95 25487 1.77 18.64 

110 22041 2.00 16.12 

126 19225 2.24 14.06 

147 16449 2.54 12.03 

164 14740 2.76 10.78 

194 12484 3.14 9.13 

225 10774 3.50 7.88 

243 9968 2.25 7.29 

284 8532 2.62 6.24 

298 8108 4.26 5.93 

317 7643 3.02 5.59 

366 6604 3.37 4.83 

374 6467 3.25 4.73 

433 5592 3.73 4.09 

488 4963 4.12 3.63 

577 4198 4.68 3.07 

77 31257 0.88 22.86 Z.108-LG200LB4E 

91 26635 1.03 19.48 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

103 23504 1.17 17.19 

121 20004 1.37 14.63 

140 17338 1.58 12.68 

166 14589 1.88 10.67 

184 13154 2.09 9.62 

214 11308 2.43 8.27 

249 9708 1.64 7.1 

276 8765 1.78 6.41 

321 7534 2.00 5.51 

338 7165 1.41 5.24 

401 6030 1.67 4.41 

445 5442 1.82 3.98 

518 4676 2.04 3.42 

223 11097 0.85 7.95 E.148-LG200LB4E 

248 9966 0.99 7.14 

270 9143 1.11 6.55 

313 7886 1.53 5.65 

358 6895 1.80 4.94 

412 6002 1.96 4.3 

469 5262 2.27 3.77 

40 (60 Hz) 555 4453 3.08 3.19 E.148-LG200LB4E 

610 4048 3.06 2.9 

702 3517 3.07 2.52 

827 2987 3.55 2.14 

1079 2289 3.71 1.64 

284 8696 0.94 6.23 E.128-LG200LB4E 

308 8026 1.06 5.75 

360 6853 1.24 4.91 

399 6197 1.43 4.44 

414 5974 1.48 4.28 

478 5164 1.71 3.7 

548 4508 1.96 3.23 

641 3852 2.30 2.76 

717 3448 2.44 2.47 

843 2931 2.60 2.1 

978 2526 2.80 1.81 

354 6979 0.86 5 E.108-LG200LB4E 

415 5946 1.07 4.26 

471 5248 1.01 3.76 

553 4467 1.48 3.2 

639 3866 1.53 2.77 

760 3252 1.85 2.33 

839 2945 1.86 2.11 

978 2526 1.93 1.81 

50 (60 Hz) 14.7 201909 0.88 121.67 D.188-LG225S4E 

17.7 167541 1.06 100.96 

19.4 152772 1.16 92.06 

22 134036 1.32 80.77 

26 115185 1.54 69.41 

33 89712 1.97 54.06 

42 71275 2.48 42.95 

34 88722 1.57 52.35 Z.188-LG225S4E 

3 - 61



P Motor 

[hp] 

3 - 62 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

37 81723 1.72 48.22 

43 70927 2.01 41.85 

48 62521 2.35 36.89 

55 54860 2.98 32.37 

22 132344 0.94 79.75 D.168-LG225S4E 

25 120080 1.03 72.36 

28 104680 1.18 63.08 

33 88882 1.39 53.56 

42 71334 1.74 42.09 Z.168-LG225S4E 

45 66859 1.85 39.45 

53 57419 2.16 33.88 

61 49607 2.50 29.27 

69 43793 2.83 25.84 

77 39421 3.14 23.26 

193 15694 4.43 9.26 

39 75407 0.94 45.44 D.148-LG225S4E 

47 64792 1.09 38.23 Z.148-LG225S4E 

51 59470 1.19 35.09 

59 51318 1.38 30.28 

67 44895 1.58 26.49 

77 39048 1.81 23.04 

88 34252 2.07 20.21 

104 28964 2.44 17.09 

50 (60 Hz) 115 26286 2.69 15.51 Z.148-LG225S4E 

132 22914 3.09 13.52 

155 19456 3.64 11.48 

207 14643 4.83 8.64 

228 13287 3.20 7.84 

236 12830 3.31 7.57 

261 11592 4.27 6.84 

278 10897 3.90 6.43 

308 9830 4.86 5.8 

363 8338 4.46 4.92 

402 7525 5.94 4.44 

66 45980 0.98 27.13 Z.128-LG225S4E 

71 42454 1.06 25.05 

83 36285 1.24 21.41 

92 32794 1.38 19.35 

96 31591 1.43 18.64 

111 27320 1.62 16.12 

127 23829 1.81 14.06 

148 20388 2.05 12.03 

166 18270 2.23 10.78 

196 15473 2.53 9.13 

227 13355 2.82 7.88 

245 12355 1.82 7.29 

286 10575 2.12 6.24 

301 10050 3.44 5.93 

319 9474 2.43 5.59 

370 8186 2.72 4.83 

377 8016 2.62 4.73 

436 6932 3.01 4.09 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

492 6152 3.32 3.63 

581 5203 3.78 3.07 

92 33015 0.83 19.48 Z.108-K4-LGI225S4E 

104 29133 0.94 17.19 

122 24795 1.11 14.63 

141 21490 1.28 12.68 

167 18083 1.52 10.67 

186 16304 1.68 9.62 

216 14016 1.96 8.27 

251 12033 1.32 7.1 

278 10864 1.43 6.41 

324 9338 1.61 5.51 

341 8881 1.14 5.24 

405 7474 1.35 4.41 

448 6745 1.47 3.98 

522 5796 1.65 3.42 

273 11332 0.90 6.55 E.148-LG225S4E 

316 9775 1.23 5.65 

361 8547 1.45 4.94 

415 7439 1.58 4.3 

473 6522 1.83 3.77 

560 5519 2.48 3.19 

616 5017 2.47 2.9 

708 4360 2.48 2.52 

834 3702 2.87 2.14 

1088 2837 2.99 1.64 

50 (60 Hz) 310 9948 0.85 5.75 E.128-LG225S4E 

364 8495 1.00 4.91 

402 7682 1.15 4.44 

417 7405 1.19 4.28 

482 6401 1.38 3.7 

553 5588 1.58 3.23 

647 4775 1.85 2.76 

723 4273 1.97 2.47 

850 3633 2.09 2.1 

986 3131 2.26 1.81 

419 7370 0.86 4.26 E.108-K4-LGI225S4E 

475 6505 0.82 3.76 

558 5536 1.19 3.2 

644 4792 1.24 2.77 

766 4031 1.49 2.33 

846 3651 1.50 2.11 

986 3131 1.55 1.81 

60 (60 Hz) 17.7 201050 0.88 100.96 D.188-LG225ZM4E 

19.4 183326 0.97 92.06 

22 160844 1.10 80.77 

26 138222 1.28 69.41 

33 107654 1.64 54.06 

42 85530 2.07 42.95 

34 106467 1.31 52.35 Z.188-LG225ZM4E 

37 98067 1.44 48.22 

43 85112 1.67 41.85 

3 - 63



P Motor 

[hp] 

3 - 64 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

48 75025 1.96 36.89 

55 65832 2.48 32.37 

61 59345 2.98 29.18 

25 144096 0.86 72.36 D.168-LG225ZM4E 

28 125616 0.99 63.08 

33 106658 1.16 53.56 

42 85600 1.45 42.09 Z.168-LG225ZM4E 

45 80231 1.54 39.45 

53 68903 1.80 33.88 

61 59528 2.08 29.27 

69 52552 2.36 25.84 

77 47305 2.62 23.26 

92 39251 3.16 19.3 

101 35794 3.42 17.6 

116 31401 3.80 15.44 

193 18833 3.69 9.26 

248 14643 7.46 7.2 

318 11409 6.09 5.61 

47 77750 0.91 38.23 Z.148-LG225ZM4E 

51 71364 0.99 35.09 

59 61582 1.15 30.28 

67 53874 1.31 26.49 

77 46858 1.51 23.04 

88 41102 1.72 20.21 

104 34757 2.04 17.09 

115 31543 2.24 15.51 

132 27496 2.57 13.52 

155 23347 3.03 11.48 

203 17877 3.96 8.79 

60 (60 Hz) 207 17572 2.42 8.64 Z.148-LG225ZM4E 

228 15945 2.66 7.84 

236 15395 3.22 7.57 

261 13911 3.05 6.84 

278 13077 3.65 6.43 

308 11796 3.15 5.8 

363 10006 4.47 4.92 

402 9030 3.77 4.44 

71 50945 0.89 25.05 Z.128-LG225ZM4E 

83 43543 1.04 21.41 

92 39353 1.15 19.35 

96 37909 1.19 18.64 

111 32784 1.35 16.12 

127 28594 1.51 14.06 

148 24466 1.71 12.03 

166 21924 1.86 10.78 

196 18568 2.11 9.13 

227 16026 2.35 7.88 

245 14826 1.52 7.29 

286 12691 1.76 6.24 

301 12060 2.87 5.93 

319 11369 2.03 5.59 

370 9823 2.26 4.83 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

377 9620 2.18 4.73 

436 8318 2.51 4.09 

492 7383 2.77 3.63 

581 6244 3.15 3.07 

122 29754 0.92 14.63 Z.108-K4-LGI225ZM4E 

141 25788 1.06 12.68 

167 21700 1.26 10.67 

186 19565 1.40 9.62 

216 16819 1.63 8.27 

251 14440 1.10 7.1 

278 13036 1.19 6.41 

324 11206 1.34 5.51 

341 10657 0.95 5.24 

405 8969 1.12 4.41 

448 8094 1.22 3.98 

522 6955 1.37 3.42 

316 11730 1.03 5.65 E.148-LG225ZM4E 

361 10256 1.21 4.94 

415 8927 1.32 4.3 

473 7827 1.53 3.77 

560 6623 2.07 3.19 

616 6021 2.06 2.9 

708 5232 2.06 2.52 

834 4443 2.39 2.14 

1088 3405 2.49 1.64 

364 10194 0.83 4.91 E.128-LG225ZM4E 

402 9218 0.96 4.44 

417 8886 1.00 4.28 

482 7682 1.15 3.7 

553 6706 1.32 3.23 

647 5730 1.54 2.76 

723 5128 1.64 2.47 

60 (60 Hz) 850 4360 1.75 2.1 E.128-LG225ZM4E 

986 3758 1.88 1.81 

558 6644 0.99 3.2 E.108-K4-LGI225ZM4E 

644 5751 1.03 2.77 

75 (60 Hz) 22 201055 0.88 80.77 D.188-LG225YMB4E 

26 172777 1.02 69.41 

33 134567 1.32 54.06 

42 106912 1.66 42.95 

37 122584 1.15 48.22 Z.188-LG225YMB4E 

43 106390 1.34 41.85 

48 93781 1.57 36.89 

55 82291 1.98 32.37 

61 74181 2.39 29.18 

72 62970 2.81 24.77 

78 58496 3.03 23.01 

90 50234 3.52 19.76 

215 21100 5.47 8.3 

45 100289 1.24 39.45 Z.168-LG225YMB4E 

53 86129 1.44 33.88 

61 74410 1.66 29.27 

3 - 65




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

69 65690 1.89 25.84 

77 59131 2.09 23.26 

92 49064 2.52 19.3 

101 44742 2.73 17.6 

116 39251 3.04 15.44 

135 33735 3.43 13.27 

173 26286 4.16 10.34 

193 23541 2.95 9.26 

248 18304 5.62 7.2 

288 15762 3.99 6.2 

318 14262 4.66 5.61 

362 12533 4.79 4.93 

400 11338 5.51 4.46 

59 76977 0.92 30.28 Z.148-LG225YMB4E 

67 67342 1.05 26.49 

77 58572 1.21 23.04 

88 51378 1.38 20.21 

104 43446 1.63 17.09 

115 39429 1.80 15.51 

132 34370 2.06 13.52 

155 29184 2.43 11.48 

203 22346 3.17 8.79 

207 21964 1.93 8.64 

228 19931 2.13 7.84 

236 19244 2.57 7.57 

261 17389 2.44 6.84 

278 16346 2.92 6.43 

308 14745 2.52 5.8 

363 12508 3.57 4.92 

402 11287 3.02 4.44 

96 47386 0.95 18.64 Z.128-K4-LGI225YMB4E 

111 40980 1.08 16.12 

127 35743 1.21 14.06 

148 30582 1.36 12.03 

166 27405 1.49 10.78 

75 (60 Hz) 196 23210 1.69 9.13 Z.128-K4-LGI225YMB4E 

3 - 66 

227 20032 1.88 7.88 

245 18533 1.21 7.29 

286 15863 1.41 6.24 

301 15075 2.29 5.93 

319 14211 1.62 5.59 

370 12279 1.81 4.83 

377 12025 1.75 4.73 

436 10398 2.01 4.09 

492 9228 2.21 3.63 

581 7805 2.52 3.07 

316 14663 0.82 5.65 E.148-LG225YMB4E 

361 12820 0.97 4.94 

415 11159 1.05 4.3 

473 9784 1.22 3.77 

560 8279 1.66 3.19 

616 7526 1.65 2.9 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

708 6540 1.65 2.52 

834 5554 1.91 2.14 

1088 4256 2.00 1.64 

417 11107 0.80 4.28 E.128-LG225YMB4E 

482 9602 0.92 3.7 

553 8382 1.06 3.23 

647 7163 1.24 2.76 

986 4697 1.79 1.81 

100 (60 Hz) 33 179122 0.99 54.06 D.188-LG250ZMB4E 

42 142310 1.24 42.95 

48 124832 1.18 36.89 Z.188-LG250ZMB4E 

55 109537 1.49 32.37 

61 98742 1.79 29.18 

72 83819 2.11 24.77 

78 77863 2.27 23.01 

90 66866 2.65 19.76 

106 57052 3.10 16.86 

135 44938 3.71 13.28 

167 36174 3.96 10.69 

192 31436 4.03 9.29 

215 28086 4.11 8.3 

61 99047 1.25 29.27 Z.168-LG250ZMB4E 

69 87440 1.42 25.84 

77 78709 1.57 23.26 

93 65309 1.90 19.3 

102 59557 2.05 17.6 

116 52247 2.28 15.44 

135 44904 2.58 13.27 

173 34989 3.12 10.34 

193 31335 2.22 9.26 

218 27782 3.70 8.21 

248 24364 2.58 7.2 

288 20980 3.17 6.2 

319 18984 3.16 5.61 

363 16683 3.75 4.93 

401 15092 3.79 4.46 

78 77965 0.91 23.04 Z.148-LG250ZMB4E 

88 68388 1.04 20.21 

100 (60 Hz) 105 57831 1.22 17.09 Z.148-LG250ZMB4E 

115 52484 1.35 15.51 

132 45750 1.55 13.52 

156 38847 1.82 11.48 

203 29744 2.38 8.79 

207 29237 1.45 8.64 

228 26530 1.60 7.84 

236 25616 1.93 7.57 

261 23146 1.83 6.84 

278 21758 2.20 6.43 

308 19627 1.89 5.8 

363 16649 2.68 4.92 

403 15024 2.27 4.44 

474 13023 0.92 3.77 E.148-LG250ZMB4E 

3 - 67




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

561 11020 1.24 3.19 

617 10018 1.24 2.9 

1090 5665 1.91 1.64 

125 (60 Hz) 42 170582 1.04 42.95 D.188-K4-LGI280ZM4E 

49 149631 0.98 36.89 Z.188-K4-LGI280ZM4E 

55 131297 1.24 32.37 

61 118358 1.50 29.18 

72 100470 1.76 24.77 

78 93332 1.90 23.01 

91 80149 2.21 19.76 

106 68386 2.59 16.86 

135 53865 3.09 13.28 

167 43360 3.30 10.69 

193 37681 3.36 9.29 

216 33666 3.43 8.3 

61 118723 1.04 29.27 Z.168-K4-LGI280ZM4E 

69 104811 1.18 25.84 

77 94346 1.31 23.26 

93 78283 1.58 19.3 

102 71388 1.71 17.6 

116 62627 1.91 15.44 

135 53825 2.15 13.27 

173 41940 2.60 10.34 

193 37560 1.85 9.26 

218 33301 3.09 8.21 

249 29204 2.15 7.2 

289 25148 2.64 6.2 

319 22755 2.64 5.61 

363 19997 3.13 4.93 

401 18090 3.16 4.46 

89 81974 0.86 20.21 Z.148-K4-LGI280ZM4E 

105 69319 1.02 17.09 

115 62911 1.13 15.51 

132 54839 1.29 13.52 

156 46564 1.52 11.48 

204 35653 1.99 8.79 

207 35045 1.21 8.64 

228 31800 1.34 7.84 

236 30705 1.61 7.57 

262 27744 1.53 6.84 

278 26081 1.83 6.43 

125 (60 Hz) 309 23526 1.58 5.8 Z.148-K4-LGI280ZM4E 

364 19956 2.24 4.92 

403 18009 1.89 4.44 

561 13209 1.04 3.19 E.148-K4-LGI280ZM4E 

3 - 68 

617 12008 1.03 2.9 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


3 - 69


Possible types of input units 

Frame-size NEMA- IEC-K4 NEMA- IEC-K2 NEMA-A5 IEC-A NEMA-P5 IEC-P Motor 

K5TC on request KTC on request 

on request 

on request 

63 • • 

56C 71 • • • • • • • 

80 • • • • • • • 

140TC 90 • • • • • • • • • 

180TC 100 • • • • • • • • • 

112 • • • • • • • 

210TC 132 • • • • • • • • • 

250TC 160 • • • • • • • • • 

180 • • • • 

280TC 200 • • • • • • • • • 

320TC 225 • • • • • • • • • 

360TC 250 • • • • • • • • • 

280 • • • • 

315 • 

allowable combinations of input unit K., A., P. see chapter 7 

Permissible overhung loads and torque 

for type of input unit A., P. 

Frame-size T 1 1) FU1 V1 F RAperm V1/2 

[lb in] [Nm] [in] [mm] [in] [mm] [lbf] [N] 

56C 71 26.5 3 5/8 16 1.575 40 54 240 

80 44.2 5 3/4 19 1.575 40 54 240 

140TC 90 88.5 10 7/8 24 1.968 50 139 620 

180TC 100 177 20 1 1/8 28 2.362 60 189 840 

112 230 26 1 1/4 28 2.362 60 225 1000 

210TC 132 540 61 1 3/8 38 3.150 80 382 1700 

250TC 160 867 98 1 5/8 42 4.331 110 405 1800 

180 1752 198 - - - - - - 

280TC 200 1752 198 2 1/8 55 4.331 110 674 3000 

320TC 225 2575 291 2 1/8 60 5.512 140 776 3450 

360TC 250 3150 356 2 3/8 65 5.512 140 877 3900 

280 5132 580 - 70 - 140 1158 5150 

315 11414 1290 - - - - - 

1)permissible short time value is 2,5 times (for e.g. starting torque of motor) 

3 - 70 

F 

F RAperm V1/2 

0 

F RAperm V1/2 

∅FU1 

0 V1/2 V1 x 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Torque tables 


Input Units see chapter 7 

Gear Type 

E.38 

725 lb in 

E.48 

1504 lb in 

1) permissible short time value is 2,5 times (for e.g. starting torque of motor) 


T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 

Ratio n 2 (60 Hz) T 2 T 2 Size 

(4 pol.) (SF=1) (SF=1) 56C 140TC 180TC 210TC 

[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

9.33 ê188 283 32 • • 

8.30 211 283 32 • • • 

7.20 243 336 38 • • • • 

6.73 260 424 48 • • • • 

5.92 296 468 53 • • • • 

5.18 338 619 70 • • • • • 

4.58 382 690 78 • • • • • • 

4.15 422 548 62 • • • • • • 

3.67 477 619 70 • • • • • • 

3.31 529 575 65 • • • • • • 

3.00 583 707 80 • • • • • • 

2.73 641 707 80 • • • • • • 

2.50 700 645 73 • • • • • • 

2.24 781 637 72 • • • • • • 

2.05 854 707 80 • • • • • • 

1.85 946 725 82 • • • • • • 

1.59 1101 637 72 • • • • • • 

11.30 155 486 55 • • • 

10.00 175 707 80 • • • • 

9.09 193 566 64 • • • • 

8.17 214 752 85 • • • • 

7.00 250 858 97 • • • • • 

6.33 276 1017 115 • • • • • • 

5.85 299 1061 120 • • • • • • 

5.08 344 1061 120 • • • • • • • 

4.62 379 1150 130 • • • • • • • 

4.21 416 1327 150 • • • • • • • 

3.87 452 1415 160 • • • • • • • 

3.56 492 1238 140 • • • • • • • 

3.24 540 1327 150 • • • • • • • 

2.95 593 1504 170 • • • • • • • 

2.70 648 1415 160 • • • • • • • 

2.41 726 1327 150 • • • • • • • 

2.15 814 1194 135 • • • • • 

1.83 956 1017 115 • • • • • 

1.52 1151 884 100 • • • • • 

3 - 71




Gear Type 

E.68 

2212 lb in 

E.88 

3981 lb in 


3 - 72 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 


(4 pol.) (SF=1) (SF=1) 56C 140TC 180TC 210TC 250TC 

[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 

12.40 141 716 81 • • • • 

11.18 157 814 92 • • • • 

10.08 174 840 95 • • • • 

8.82 198 1327 150 • • • • • 

7.92 221 1504 170 • • • • • • 

7.23 242 1327 150 • • • • • • 

6.42 273 1504 170 • • • • • • • 

5.92 296 1681 190 • • • • • • • 

5.36 326 1946 220 • • • • • • • 

4.93 355 1990 225 • • • • • • • 

4.56 384 1946 220 • • • • • • • • 

4.24 413 2035 230 • • • • • • • • 

3.74 468 2035 230 • • • • • • • • 

3.45 507 2123 240 • • • • • • • • 

3.09 566 2212 250 • • • • • • • • 

2.85 614 2212 250 • • • • • • 

2.39 732 2035 230 • • • • • • 

2.04 858 1858 210 • • • • • • 

1.70 1029 1548 175 • • • • 

1.41 1241 1327 150 • • • • 

10.33 169 2035 230 • • • 

9.46 185 1858 210 • • • 

8.42 208 2167 245 • • • • 

7.69 228 2167 245 • • • • 

7.07 248 2565 290 • • • • 

6.53 268 2654 300 • • • • 

6.06 289 2477 280 • • • • • 

5.65 310 2831 320 • • • • • 

5.11 342 3273 370 • • • • • • 

4.70 372 3406 385 • • • • • • 

4.23 414 3539 400 • • • • • • 

3.90 449 3406 385 • • • • • • 

3.30 530 3981 450 • • • • • • 

2.88 608 3848 435 • • • • • • 

2.45 714 3716 420 • • • • • 

2.09 837 3716 420 • • • • • 

1.71 1023 3141 355 • • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

E.108 

6592 lb in 

E.128 

8848 lb in 

E.148 

13714 lb in 



Ratio n2 (60 Hz) T2 T2 1) T1 [Nm / lb in] 

10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752198 / 1752291 / 2575 356 / 3150 580 / 5132 

Size 

(4 pol.) (SF=1) (SF=1) 140TC 180TC 210TC 250TC 280TC 320TC 360TC 

[-] [rpm] [lb in] [Nm] 90 100 112 132 160 180 200 225 250 280 

5.46 321 5839 660 • • • • • • • • 

5.00 350 6016 680 • • • • • • • • 

4.26 411 6370 720 • • • • • • • • 

3.76 465 5308 600 • • • • • • • • 

3.20 547 6591 745 • • • • • • • 

2.77 632 5928 670 • • • • • • • 

2.33 751 6016 680 • • • • • • • 

2.11 829 5485 620 • • • • • 

1.81 967 4866 550 • • • • • 

10.14 173 4813 544 • • • 

9.40 186 5167 584 • • • 

8.94 196 5662 640 • • • • 

8.35 210 6299 712 • • • • 

7.37 237 7219 816 • • • • • • 

6.95 252 7786 880 • • • • • • 

6.23 281 8210 928 • • • • • • • 

5.75 304 8494 960 • • • • • • • 

4.91 356 8494 960 • • • • • • • 

4.44 394 8848 1000 • • • • • • • 

4.28 409 8848 1000 • • • • • • • 

3.70 473 8848 1000 • • • • • • • • 

3.23 542 8848 1000 • • • • • • • • 

2.76 634 8848 1000 • • • • • • • • 

2.47 709 8405 950 • • • • • • 

2.10 833 7609 860 • • • • • • 

1.81 967 7078 800 • • • • • 

1.36 1287 6016 680 • • • • • 

13.67 128 5308 600 • 

12.54 140 5308 600 • 

11.57 151 6016 680 • 

10.73 163 6724 760 • 

10.13 173 7078 800 • • 

9.47 185 8140 920 • • 

8.42 208 8848 1000 • • • • 

7.95 220 9378 1060 • • • • 

7.14 245 9909 1120 • • • • • 

6.55 267 10175 1150 • • • • • 

5.65 310 12033 1360 • • • • • • 

4.94 354 12387 1400 • • • • • • 

4.30 407 11767 1330 • • • • • • • 

3.77 464 11944 1350 • • • • • • • 

3.19 549 13714 1550 • • • • • • • 

2.90 603 12387 1400 • • • • • • • 

2.52 694 10794 1220 • • • • • • • 

2.14 818 10617 1200 • • • • • • 

1.64 1067 8494 960 • • • • • • 

3 - 73




Gear Type 

D.18 

796 lb in 

Z.18 

796 lb in 


3 - 74 

Ratio n 2 (60 Hz) T 2 T 2 Size of motor 


[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

200.36 8.7 796 90 • 

172.85 10.1 796 90 • 

148.50 11.8 796 90 • 

136.71 12.8 796 90 • 

124.29 14.1 796 90 • 

110.01 15.9 796 90 • 

92.14 19.0 796 90 • 

78.56 22.3 796 90 • 

66.78 26.0 796 90 • 

58.03 30.0 796 90 • 

50.51 35.0 796 90 • 

45.56 38.0 796 90 • 

40.21 44.0 796 90 • 

32.26 54.0 796 90 • 

43.15 41 796 90 • 

37.23 47 796 90 • 

31.98 55 796 90 • 

29.45 59 796 90 • 

26.77 65 796 90 • 

23.69 74 796 90 • 

19.85 88 796 90 • 

16.92 103 796 90 • 

14.38 122 796 90 • 

12.50 140 796 90 • 

10.88 161 769 87 • 

9.81 178 734 83 • 

8.66 202 707 80 • 

7.42 236 486 55 • 

6.45 271 468 53 • 

5.61 312 451 51 • 

5.06 346 433 49 • 

4.47 392 433 49 • 

3.58 488 407 46 • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

D.28 

1238 lb in 

Z.28 

1238 lb in 



T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 

241.05 7.3 1238 140 • 

207.96 8.4 1238 140 • • 

178.66 9.8 1238 140 • • 

164.48 10.6 1238 140 • • • 

149.53 11.7 1238 140 • • • 

132.35 13.2 1238 140 • • • 

110.86 15.8 1238 140 • • • 

94.52 18.5 1238 140 • • • 

80.34 22.0 1238 140 • • • 

69.82 25.0 1238 140 • • • 

60.77 29.0 1238 140 • • • 

54.82 32.0 1238 140 • • • 

48.38 36.0 1238 140 • • • 

51.35 34 1238 140 • 

43.30 40 1238 140 • • 

38.45 46 1238 140 • • 

33.71 52 1238 140 • • • 

30.16 58 1238 140 • • • 

26.77 65 1238 140 • • • 

23.46 75 1238 140 • • • 

20.63 85 1238 140 • • • 

18.63 94 1238 140 • • • • 

16.24 108 1238 140 • • • 

14.58 120 1238 140 • • • 

13.17 133 1238 140 • • • • 

11.94 147 1238 140 • • • • 

10.87 161 1238 140 • • • • 

9.61 182 1238 140 • • • • 

8.87 197 1238 140 • • • • 

7.64 229 1203 136 • • • • 

6.94 252 1167 132 • • • • 

6.31 277 840 95 • • • • 

5.72 306 822 93 • • • • 

5.21 336 814 92 • • • • 

4.60 380 778 88 • • • • 

4.25 412 796 90 • • • • 

3.66 478 707 80 • • • • 

3.33 526 681 77 • • • • 

3 - 75




Gear Type 

Z.38-D.28 

1946 lb in 

Z.38-Z.28 

1946 lb in 


3 - 76 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

5905 0.29 1946 220 • 

5094 0.33 1946 220 • • 

4376 0.39 1946 220 • • 

4029 0.42 1946 220 • • • 

3663 0.46 1946 220 • • • 

3242 0.52 1946 220 • • • 

2715 0.62 1946 220 • • • 

2315 0.73 1946 220 • • • 

1968 0.85 1946 220 • • • 

1710 0.98 1946 220 • • • 

1489 1.13 1946 220 • • • 

1343 1.20 1946 220 • • • 

1258 1.3 1946 220 • 

1061 1.6 1946 220 • • 

942 1.8 1946 220 • • 

890 1.9 1946 220 • 

751 2.2 1946 220 • • 

666 2.5 1946 220 • • 

584 2.9 1946 220 • • • 

523 3.2 1946 220 • • • 

464 3.6 1946 220 • • • 

407 4.1 1946 220 • • • 

358 4.7 1946 220 • • • 

323 5.2 1946 220 • • • • 

281 6.0 1946 220 • • • 

253 6.6 1946 220 • • • 

228 7.3 1946 220 • • • • 

207 8.1 1946 220 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

D.38 

1946 lb in 

Z.38 

1946 lb in 



T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

191.75 9.1 1946 220 • • • 

170.24 10.3 1946 220 • • • 

149.26 11.7 1946 220 • • • • 

133.57 13.1 1946 220 • • • • 

118.55 14.8 1946 220 • • • • 

103.89 16.8 1946 220 • • • • 

91.34 19.2 1946 220 • • • • 

82.52 21.0 1946 220 • • • • 

71.91 24.0 1946 220 • • • • 

64.58 27.0 1946 220 • • • • 

58.30 30.0 1946 220 • • • • 

52.86 33.0 1946 220 • • • • 

48.10 36.0 1946 220 • • • • 

42.53 41.0 1946 220 • • • • 

39.28 45.0 1946 220 • • • • 

33.82 52.0 1946 220 • • • • 

30.74 57.0 1946 220 • • • • 

44.12 40 1946 220 • • • 

39.24 45 1840 208 • • • 

34.04 51 1946 220 • • • • 

31.80 55 1946 220 • • • • 

27.97 63 1946 220 • • • • 

24.50 71 1946 220 • • • • • 

21.67 81 1946 220 • • • • • • 

19.64 89 1946 220 • • • • • • 

17.33 101 1946 220 • • • • • • 

15.64 112 1946 220 • • • • • • 

14.18 123 1946 220 • • • • • • 

12.92 135 1946 220 • • • • • • 

11.82 148 1946 220 • • • • • • 

10.57 166 1858 210 • • • • • • 

9.70 180 1769 200 • • • • • • 

8.75 200 1725 195 • • • • • • 

7.52 233 1681 190 • • • • • • 

7.50 233 1636 185 • • • • • • 

6.71 261 1592 180 • • • • • • 

6.16 284 1504 170 • • • • • • 

5.55 315 1459 165 • • • • • • 

4.77 367 1415 160 • • • • • • 

3 - 77




Gear Type 

D.48-D.28 

3981 lb in 

D.48-Z.28 

3981 lb in 


3 - 78 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

27940 0.06 3981 450 • 

24104 0.07 3981 450 • • 

20708 0.08 3981 450 • • 

19065 0.08 3981 450 • • • 

17332 0.10 3981 450 • • • 

15341 0.11 3981 450 • • • 

12849 0.13 3981 450 • • • 

10956 0.15 3981 450 • • • 

9312 0.18 3981 450 • • • 

8093 0.21 3981 450 • • • 

7044 0.24 3981 450 • • • 

6354 0.26 3981 450 • • • 

5608 0.30 3981 450 • • • 

5019 0.34 3981 450 • • 

4456 0.38 3981 450 • • 

3907 0.43 3981 450 • • • 

3496 0.48 3981 450 • • • 

3103 0.54 3981 450 • • • 

2720 0.62 3981 450 • • • 

2391 0.70 3981 450 • • • 

2160 0.78 3981 450 • • • • 

1882 0.89 3981 450 • • • 

1690 0.99 3981 450 • • • 

1526 1.10 3981 450 • • • • 

1384 1.20 3981 450 • • • • 

1259 1.30 3981 450 • • • • 

1113 1.50 3981 450 • • • • 

1028 1.60 3981 450 • • • • 

885 1.90 3981 450 • • • • 

805 2.10 3981 450 • • • • 

731 2.30 3981 450 • • • • 

663 2.50 3981 450 • • • • 

603 2.80 3981 450 • • • • 

534 3.10 3981 450 • • • • 

493 3.40 3981 450 • • • • 

424 3.90 3981 450 • • • • 

423 4.00 3981 450 • • • • 

384 4.40 3981 450 • • • • 

349 4.80 3981 450 • • • • 

309 5.40 3981 450 • • • • 

285 5.90 3981 450 • • • • 

246 6.80 3981 450 • • • • 

223 7.50 3981 450 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

D.48 

3981 lb in 

Z.48 

3981 lb in 



T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

208.77 8.4 3981 450 • • • 

185.66 9.4 3981 450 • • • 

161.05 10.9 3981 450 • • • • 

150.48 11.6 3981 450 • • • • 

132.34 13.2 3981 450 • • • • 

115.91 15.1 3981 450 • • • • • 

102.52 17.1 3981 450 • • • • • 

92.91 18.8 3981 450 • • • • • 

82.02 21.0 3981 450 • • • • • 

73.99 24.0 3981 450 • • • • • 

67.10 26.0 3981 450 • • • • • 

61.14 29.0 3981 450 • • • • • 

55.92 31.0 3981 450 • • • • • 

50.00 35.0 3981 450 • • • • • 

45.91 38.0 3981 450 • • • • • 

41.38 42.0 3981 450 • • • • • 

35.59 49.0 3981 450 • • • • • 

51.28 34 2583 292 • • • 

45.38 39 3981 450 • • • • 

41.26 42 3981 450 • • • • 

37.06 47 3981 450 • • • • 

31.77 55 3981 450 • • • • • 

28.74 61 3981 450 • • • • • • 

26.53 66 3981 450 • • • • • • 

23.07 76 3981 450 • • • • • • • 

20.95 84 3981 450 • • • • • • • 

19.13 91 3981 450 • • • • • • • 

17.55 100 3981 450 • • • • • • • 

16.17 108 3804 430 • • • • • • • 

14.68 119 3716 420 • • • • • • • 

13.38 131 3627 410 • • • • • • • 

12.25 143 3539 400 • • • • • • • 

10.93 160 3450 390 • • • • • • • 

9.76 179 3362 380 • • • • • 

8.29 211 3185 360 • • • • • 

6.90 254 3008 340 • • • • • 

6.79 258 2388 270 • • • • • • • 

6.06 289 2388 270 • • • • • 

5.15 340 2388 270 • • • • • 

4.28 409 2300 260 • • • • • 

3 - 79




Gear Type 

D.68-D.28 

7078 lb in 

D.68-Z.28 

7078 lb in 


3 - 80 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

41961 0.04 7078 800 • 

36200 0.05 7078 800 • • 

31101 0.05 7078 800 • • 

28633 0.06 7078 800 • • • 

26030 0.07 7078 800 • • • 

23039 0.07 7078 800 • • • 

19297 0.09 7078 800 • • • 

16454 0.10 7078 800 • • • 

13986 0.12 7078 800 • • • 

12154 0.14 7078 800 • • • 

10579 0.16 7078 800 • • • 

9543 0.18 7078 800 • • • 

8422 0.20 7078 800 • • • 

7538 0.22 7078 800 • • 

6693 0.25 7078 800 • • 

5868 0.29 7078 800 • • • 

5251 0.32 7078 800 • • • 

4660 0.36 7078 800 • • • 

4084 0.41 7078 800 • • • 

3591 0.47 7078 800 • • • 

3244 0.52 7078 800 • • • • 

2827 0.59 7078 800 • • • 

2539 0.66 7078 800 • • • 

2292 0.73 7078 800 • • • • 

2078 0.81 7078 800 • • • • 

1891 0.89 7078 800 • • • • 

1672 1.00 7078 800 • • • • 

1544 1.10 7078 800 • • • • 

1329 1.30 7078 800 • • • • 

1208 1.40 7078 800 • • • • 

1098 1.50 7078 800 • • • • 

996 1.70 7078 800 • • • • 

906 1.90 7078 800 • • • • 

801 2.10 7078 800 • • • • 

740 2.30 7078 800 • • • • 

637 2.60 7078 800 • • • • 

607 2.80 7078 800 • • • • 

550 3.10 7078 800 • • • • 

501 3.40 7078 800 • • • • 

443 3.80 7078 800 • • • • 

409 4.10 7078 800 • • • • 

352 4.80 7078 800 • • • • 

320 5.30 7078 800 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

D.68 

7078 lb in 

Z.68 

7078 lb in 



T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 


(4 pol.) (SF=1) (SF=1) 56C 140TC 180TC 210TC 250TC 280TV 

[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

281.01 6.2 7078 800 • • • 

248.68 7.0 7078 800 • • • • 

226.07 7.7 7078 800 • • • • 

203.09 8.6 7078 800 • • • • 

174.08 10.1 7078 800 • • • • • 

157.50 11.1 7078 800 • • • • • 

145.38 12.0 7078 800 • • • • • 

126.41 13.8 7078 800 • • • • • 

114.78 15.2 7078 800 • • • • • 

104.80 16.7 7078 800 • • • • • 

96.16 18.2 7078 800 • • • • • 

88.59 19.8 7078 800 • • • • • 

80.46 22.0 7078 800 • • • • • 

73.30 24.0 7078 800 • • • • • 

67.14 26.0 7078 800 • • • • • 

59.91 29.0 7078 800 • • • • • 

53.47 33.0 7078 800 • • • 

45.41 39.0 7078 800 • • • 

37.80 46.0 7078 800 • • • 

48.09 36 4733 535 • • • • 

42.06 42 7078 800 • • • • • 

37.76 46 7078 800 • • • • • • 

34.49 51 7078 800 • • • • • • 

30.60 57 7078 800 • • • • • • • 

28.25 62 7078 800 • • • • • • • 

25.55 68 7078 800 • • • • • • • 

23.53 74 7078 800 • • • • • • • 

21.76 80 7078 800 • • • • • • • • 

20.20 87 7078 800 • • • • • • • • 

17.82 98 7078 800 • • • • • • • • 

16.45 106 7078 800 • • • • • • • • 

14.74 119 7078 800 • • • • • • • • 

13.59 129 7078 800 • • • • • • 

11.40 154 6945 785 • • • • • • 

9.73 180 6591 745 • • • • • • 

8.11 216 6193 700 • • • • 

6.72 260 5751 650 • • • • 

5.93 295 4335 490 • • • • • • 

5.06 346 4247 480 • • • • • • 

4.22 415 4158 470 • • • • 

3.49 501 3716 420 • • • • 

3 - 81




Gear Type 

D.88-D.28 

14864 lb in 

D.88-Z.28 

14864 lb in 


3 - 82 

T 1 1)1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

46233 0.04 14864 1680 • 

39885 0.04 14864 1680 • • 

34267 0.05 14864 1680 • • 

31547 0.05 14864 1680 • • • 

28679 0.06 14864 1680 • • • 

25384 0.07 14864 1680 • • • 

21262 0.08 14864 1680 • • • 

18129 0.09 14864 1680 • • • 

15409 0.11 14864 1680 • • • 

13391 0.13 14864 1680 • • • 

11656 0.14 14864 1680 • • • 

10514 0.16 14864 1680 • • • 

9279 0.18 14864 1680 • • • 

8305 0.20 14864 1680 • • 

7374 0.23 14864 1680 • • 

6465 0.26 14864 1680 • • • 

5785 0.29 14864 1680 • • • 

5134 0.33 14864 1680 • • • 

4500 0.37 14864 1680 • • • 

3957 0.43 14864 1680 • • • 

3574 0.47 14864 1680 • • • • 

3114 0.54 14864 1680 • • • 

2797 0.60 14864 1680 • • • 

2525 0.67 14864 1680 • • • • 

2290 0.73 14864 1680 • • • • 

2084 0.81 14864 1680 • • • • 

1842 0.91 14864 1680 • • • • 

1701 0.99 14864 1680 • • • • 

1465 1.10 14864 1680 • • • • 

1331 1.30 14864 1680 • • • • 

1210 1.40 14864 1680 • • • • 

1097 1.50 14864 1680 • • • • 

999 1.70 14864 1680 • • • • 

883 1.90 14864 1680 • • • • 

815 2.10 14864 1680 • • • • 

702 2.40 14864 1680 • • • • 

647 2.60 14864 1680 • • • • 

587 2.90 14864 1680 • • • • 

534 3.10 14864 1680 • • • • 

472 3.60 14864 1680 • • • • 

436 3.90 14864 1680 • • • • 

375 4.50 14864 1680 • • • • 

341 4.90 14864 1680 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

D.88 

14864 lb in 

Z.88 

14864 lb in 


T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 


(4 pol.) (SF=1) (SF=1) 56C 140TC 180TC 210TC 250TC 280TC 

[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

300.41 5.8 14864 1680 • • • • 

270.90 6.5 14864 1680 • • • • 

244.29 7.2 14864 1680 • • • • 

213.64 8.2 14864 1680 • • • • • 

191.80 9.1 14864 1680 • • • • • • 

175.18 10.0 14864 1680 • • • • • • 

155.46 11.3 14864 1680 • • • • • • • 

143.50 12.2 14864 1680 • • • • • • • 

129.79 13.5 14864 1680 • • • • • • • 

119.52 14.6 14864 1680 • • • • • • • 

110.54 15.8 14864 1680 • • • • • • • 

102.61 17.1 14864 1680 • • • • • • • 

90.53 19.3 14864 1680 • • • • • • • 

83.58 21.0 14864 1680 • • • • • • • 

74.88 23.0 14864 1680 • • • • • • • 

69.05 25.0 14864 1680 • • • • • 

57.93 30.0 14864 1680 • • • • • 

49.42 35.0 14864 1680 • • • • • 

41.19 42.0 14864 1680 • • • 

34.14 51.0 14864 1680 • • • 

50.73 34 12988 1468 • • 

45.76 38 14864 1680 • • • 

41.90 42 14864 1680 • • • 

37.27 47 14864 1680 • • • • 

34.07 51 14864 1680 • • • • 

31.32 56 14864 1680 • • • • 

28.93 60 14864 1680 • • • • 

26.85 65 14864 1680 • • • • • 

25.01 70 14864 1680 • • • • • 

22.61 77 14864 1680 • • • • • • 

20.81 84 14864 1680 • • • • • • 

18.72 93 14864 1680 • • • • • • 

17.27 101 14864 1680 • • • • • • 

14.63 120 14333 1620 • • • • • • 

12.75 137 13714 1550 • • • • • • 

10.85 161 13006 1470 • • • • • 

9.26 189 12298 1390 • • • • • 

7.59 231 11502 1300 • • • • • 

6.96 251 11148 1260 • • • • • 

5.94 295 10529 1190 • • • • • 

4.87 359 9821 1110 • • • • • 

4.45 393 7078 800 • • • • • 

3.79 462 6547 740 • • • • • 

3.11 563 5839 660 • • • • • 


3 - 83




Gear Type 

D.108-D38 

27428 lb in 

D.108-Z38 

27428 lb in 


3 - 84 

Ratio n2 (60 Hz) T2 T2 T 1) 

1 [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752198 / 1752 

Size 


[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

68896 0.03 27428 3100 • • • 

61169 0.03 27428 3100 • • • 

53627 0.03 27428 3100 • • • • 

47990 0.04 27428 3100 • • • • 

42595 0.04 27428 3100 • • • • 

37326 0.05 27428 3100 • • • • 

32819 0.05 27428 3100 • • • • 

29650 0.06 27428 3100 • • • • 

25836 0.07 27428 3100 • • • • 

23204 0.08 27428 3100 • • • • 

20948 0.08 27428 3100 • • • • 

18993 0.09 27428 3100 • • • • 

17282 0.10 27428 3100 • • • • 

15280 0.11 27428 3100 • • • • 

15853 0.11 27428 3100 • • • 

14098 0.12 27428 3100 • • • 

12229 0.14 27428 3100 • • • • 

11426 0.15 27428 3100 • • • • 

10049 0.17 27428 3100 • • • • 

8801 0.20 27428 3100 • • • • • 

7785 0.22 27428 3100 • • • • • 

7055 0.25 27428 3100 • • • • • 

6228 0.28 27428 3100 • • • • • 

5618 0.31 27428 3100 • • • • • 

5096 0.34 27428 3100 • • • • • 

4643 0.38 27428 3100 • • • • • 

4246 0.41 27428 3100 • • • • • 

3797 0.46 27428 3100 • • • • • 

3624 0.48 27428 3100 • • • 

3223 0.54 27428 3100 • • • 

2796 0.63 27428 3100 • • • • 

2612 0.67 27428 3100 • • • • 

2297 0.76 27428 3100 • • • • 

2012 0.87 27428 3100 • • • • • 

1780 0.98 27428 3100 • • • • • 

1613 1.10 27428 3100 • • • • • 

1424 1.20 27428 3100 • • • • • 

1284 1.40 27428 3100 • • • • • 

1165 1.50 27428 3100 • • • • • 

1061 1.60 27428 3100 • • • • • 

971 1.80 27428 3100 • • • • • 

868 2.00 27428 3100 • • • • • 

797 2.20 27428 3100 • • • • • 

718 2.40 27428 3100 • • • • • 

618 2.80 27428 3100 • • • • • 

616 2.80 27428 3100 • • • • • 

551 3.20 27428 3100 • • • • • 

506 3.50 27428 3100 • • • • • 

456 3.80 27428 3100 • • • • • 

392 4.50 27428 3100 • • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T 1 1) [Nm / lb in] 

98 / 867 198 / 1752 198 / 1752 291 / 2575 

5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 

356 / 

3150 

Ratio n2 (60 Hz) T2 T2 Size 

Gear Type 


[-] [rpm] [lb in] [Nm] 80 90 100 112 132 160 180 200 225 250 

D.108 359.30 4.9 27428 3100 • • 

27428 lb in 

325.21 

284.73 

5.4 

6.1 

27428 

27428 

3100 

3100 

• 

• 

• 

• • 

256.86 6.8 27428 3100 • • • • 

235.19 7.4 27428 3100 • • • • 

209.21 8.4 27428 3100 • • • • • 

191.21 9.2 27428 3100 • • • • • 

175.78 10.0 27428 3100 • • • • • 

162.40 10.8 27428 3100 • • • • • 

150.70 11.6 27428 3100 • • • • • • 

140.37 12.5 27428 3100 • • • • • • 

126.90 13.8 27428 3100 • • • • • • 

116.83 15.0 27428 3100 • • • • • • 

105.08 16.7 27428 3100 • • • • • • 

96.94 18.1 27428 3100 • • • • • • 

82.14 21.0 27428 3100 • • • • • • 

71.59 24.0 27428 3100 • • • • • • 

60.90 29.0 27428 3100 • • • • 

51.97 34.0 27428 3100 • • • • 

42.61 41.0 27428 3100 • • • • 

Z.108 59.05 30 20952 2368 • • • 

27428 lb in 

54.15 

48.38 

32 

36 

20403 

27428 

2306 

3100 

• 

• 

• 

• 

• 

• • 

44.31 39 27428 3100 • • • • 

40.82 43 27428 3100 • • • • 

37.79 46 27428 3100 • • • • 

35.14 50 27428 3100 • • • • • 

32.81 53 27428 3100 • • • • • 

29.35 60 27428 3100 • • • • • • • 

27.20 64 27428 3100 • • • • • • • 

24.94 70 27428 3100 • • • • • • • • 

22.86 77 27428 3100 • • • • • • • • 

19.48 90 27428 3100 • • • • • • • • 

17.19 102 27428 3100 • • • • • • • • 

14.63 120 27428 3100 • • • • • • • 

12.68 138 27428 3100 • • • • • • • 

10.67 164 27428 3100 • • • • • • • 

9.62 182 27428 3100 • • • • • 

8.27 212 27428 3100 • • • • • 

7.10 246 15926 1800 • • • • • • • 

6.41 273 15572 1760 • • • • • 

5.51 318 15041 1700 • • • • • 

5.24 334 10086 1140 • • • • • 

4.41 397 10086 1140 • • • • • 

3.98 440 9909 1120 • • • • • 

1) permissible 3.42 short time value 512is 2,5 9555 times (for 1080e.g. starting torque of motor) • • • • • 

3 - 85




Gear Type 

D.128-D38 

45124 lb in 

D.128-Z38 

45124 lb in 

D.128-Z48 

45124 lb in 


3 - 86 

3 / 27 3 / 27 5 / 44 

1) 

T1 [Nm / lb in] 

10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752198 / 1752 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

51420 0.03 45124 5100 • • • 

45652 0.04 45124 5100 • • • 

40024 0.04 45124 5100 • • • • 

35817 0.05 45124 5100 • • • • 

31790 0.06 45124 5100 • • • • 

27858 0.06 45124 5100 • • • • 

24494 0.07 45124 5100 • • • • 

22129 0.08 45124 5100 • • • • 

19282 0.09 45124 5100 • • • • 

17318 0.10 45124 5100 • • • • 

15634 0.11 45124 5100 • • • • 

14175 0.12 45124 5100 • • • • 

12898 0.14 45124 5100 • • • • 

11404 0.15 45124 5100 • • • • 

11831 0.15 45124 5100 • • • 

10521 0.17 45124 5100 • • • 

9127 0.19 45124 5100 • • • • 

8528 0.21 45124 5100 • • • • 

7500 0.23 45124 5100 • • • • 

6569 0.27 45124 5100 • • • • • 

5810 0.30 45124 5100 • • • • • 

5266 0.33 45124 5100 • • • • • 

4648 0.38 45124 5100 • • • • • 

4193 0.42 45124 5100 • • • • • 

3803 0.46 45124 5100 • • • • • 

3465 0.51 45124 5100 • • • • • 

3169 0.55 45124 5100 • • • • • 

2834 0.62 45124 5100 • • • • • 

2602 0.67 45124 5100 • • • • • 

2345 0.75 45124 5100 • • • • • 

2017 0.87 45124 5100 • • • • • 

2011 0.87 45124 5100 • • • • • 

1798 0.97 45124 5100 • • • • • 

1651 1.10 45124 5100 • • • • • 

1488 1.20 45124 5100 • • • • • 

1280 1.40 45124 5100 • • • • • 

1271 1.4 45124 5100 • • • • • • 

1166 1.5 45124 5100 • • • • • • 

1074 1.6 45124 5100 • • • • • • 

975 1.8 45124 5100 • • • • • • 

889 2.0 45124 5100 • • • • • • 

814 2.1 45124 5100 • • • • • • 

726 2.4 45124 5100 • • • • • • 

648 2.7 45124 5100 • • • • 

551 3.2 45124 5100 • • • • 

458 3.8 45124 5100 • • • • 

451 3.9 45124 5100 • • • • • • 

403 4.3 45124 5100 • • • • 

342 5.1 45124 5100 • • • • 

285 6.1 45124 5100 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

D.128 

45124 lb in 

Z.128 

45124 lb in 



Ratio n2 (60 Hz) T2 T2 1) 


5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 291 / 2575 356 / 3150 

Size 


[-] [rpm] [lb in] [Nm] 80 90 100 112 132 160 180 200 225 250 

268.16 6.5 45124 5100 • • • 

245.93 7.1 45124 5100 • • • 

219.72 8.0 45124 5100 • • • • 

201.22 8.7 45124 5100 • • • • 

185.36 9.4 45124 5100 • • • • 

171.62 10.2 45124 5100 • • • • 

159.60 11.0 45124 5100 • • • • • 

148.99 11.7 45124 5100 • • • • • 

133.30 13.1 45124 5100 • • • • • • • 

123.53 14.2 45124 5100 • • • • • • • 

113.24 15.5 45124 5100 • • • • • • • 

103.80 16.9 45124 5100 • • • • • • • 

88.46 19.8 45124 5100 • • • • • • • 

78.06 22.0 45124 5100 • • • • • • • 

66.43 26.0 45124 5100 • • • • • • 

57.56 30.0 45124 5100 • • • • • • 

48.44 36.0 45124 5100 • • • • • • 

43.71 40.0 45124 5100 • • • • 

37.57 47.0 45124 5100 • • • • 

44.19 40 28977 3275 • • • 

40.96 43 28278 3196 • • • 

38.94 5 45124 5100 • • • • 

36.39 48 45124 5100 • • • • 

32.11 55 45124 5100 • • • • • • 

30.28 58 45124 5100 • • • • • • 

27.13 65 45124 5100 • • • • • • • 

25.05 70 45124 5100 • • • • • • • 

21.41 82 45124 5100 • • • • • • • • 

19.35 90 45124 5100 • • • • • • • • 

18.64 94 45124 5100 • • • • • • • 

16.12 109 44178 4993 • • • • • • • • 

14.06 124 43072 4868 • • • • • • • • 

12.03 145 41727 4716 • • • • • • • • 

10.78 162 40727 4603 • • • • • • 

9.13 192 39152 4425 • • • • • • 

7.88 222 37674 4258 • • • • • 

7.29 240 22473 2540 • • • • • 

6.24 280 22385 2530 • • • • • 

5.93 295 34577 3908 • • • • • 

5.59 313 23066 2607 • • • • • 

4.83 362 22226 2512 • • • • • 

4.73 370 21014 2375 • • • • • 

4.09 428 20881 2360 • • • • • 

3.63 482 20438 2310 • • • • • 

3.07 570 19642 2220 • • • • • 

3 - 87




3 / 27 3 / 27 5 / 44 

T 1) 


10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752198 / 1752 


Gear Type 


[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

D.148-D38 64450 0.03 70784 8000 • • • 

57221 

70784 lb in 50166 

0.03 

0.03 

70784 

70784 

8000 

8000 

• 

• 

• 

• 

• 

• • 

44893 0.04 70784 8000 • • • • 

39846 0.04 70784 8000 • • • • 

34917 0.05 70784 8000 • • • • 

30701 0.06 70784 8000 • • • • 

27736 0.06 70784 8000 • • • • 

24169 0.07 70784 8000 • • • • 

21707 0.08 70784 8000 • • • • 

19596 0.09 70784 8000 • • • • 

17767 0.10 70784 8000 • • • • 

16167 0.11 70784 8000 • • • • 

14294 0.12 70784 8000 • • • • 

D.148-Z38 14830 0.12 70784 8000 • • • 

13188 

70784 lb in 11440 

0.13 

0.15 

70784 

70784 

8000 

8000 

• 

• 

• 

• 

• 

• • 

10689 0.16 70784 8000 • • • • 

9401 0.19 70784 8000 • • • • 

8233 0.21 70784 8000 • • • • • 

7282 0.24 70784 8000 • • • • • 

6600 0.27 70784 8000 • • • • • 

5826 0.30 70784 8000 • • • • • 

5256 0.33 70784 8000 • • • • • 

4767 0.37 70784 8000 • • • • • 

4343 0.40 70784 8000 • • • • • 

3972 0.44 70784 8000 • • • • • 

3552 0.49 70784 8000 • • • • • 

3261 0.54 70784 8000 • • • • • 

2939 0.60 70784 8000 • • • • • 

2528 0.69 70784 8000 • • • • • 

2521 0.69 70784 8000 • • • • • 

2254 0.78 70784 8000 • • • • • 

2070 0.85 70784 8000 • • • • • 

1865 0.94 70784 8000 • • • • • 

1604 1.10 70784 8000 • • • • • 

D.148-Z48 1631 1.10 70784 8000 • • • • • • 

1502 

70784 lb in 1364 

1.20 

1.30 

70784 

70784 

8000 

8000 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

1243 1.40 70784 8000 • • • • • • 

1139 1.50 70784 8000 • • • • • • 

1016 1.70 70784 8000 • • • • • • 

907 1.90 70784 8000 • • • • 

770 2.30 70784 8000 • • • • 

641 2.70 70784 8000 • • • • 

631 2.80 70784 8000 • • • • • • 

563 3.10 70784 8000 • • • • 

478 3.70 70784 8000 • • • • 

398 4.40 70784 8000 • • • • 


3 - 88 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

D.148 

70784 lb in 

Z.148 

70784 lb in 



Ratio n2 (60 Hz) T2 T2 1) 


10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 291 / 2575 356 / 3150 580 / 5132 

Size 


[-] [rpm] [lb in] [Nm] 90 100 112 132 160 180 200 225 250 280 

336.11 5.2 70784 8000 • • 

301.34 5.8 70784 8000 • • • 

276.23 6.3 70784 8000 • • • 

254.70 6.9 70784 8000 • • • 

236.05 7.4 70784 8000 • • • 

224.43 7.8 70784 8000 • • • • 

209.76 8.3 70784 8000 • • • • 

185.03 9.5 70784 8000 • • • • • • 

174.53 10.0 70784 8000 • • • • • • 

156.38 11.2 70784 8000 • • • • • • • 

144.39 12.1 70784 8000 • • • • • • • 

123.37 14.2 70784 8000 • • • • • • • 

111.50 15.7 70784 8000 • • • • • • • 

107.42 16.3 70784 8000 • • • • • • 

92.91 18.8 70784 8000 • • • • • • • 

81.04 22.0 70784 8000 • • • • • • • 

69.36 25.0 70784 8000 • • • • • • • 

62.12 28.0 70784 8000 • • • • • 

52.61 33.0 70784 8000 • • • • • 

45.44 39.0 70784 8000 • • • • 

34.15 51.0 70784 8000 • • • • 

57.50 30 41267 4664 • 

54.24 32 70784 8000 • • 

50.74 34 70784 8000 • • 

45.11 39 70784 8000 • • • • 

42.59 41 70784 8000 • • • • 

38.23 46 70784 8000 • • • • • 

35.09 50 70784 8000 • • • • • 

30.28 58 70784 8000 • • • • • • 

26.49 66 70784 8000 • • • • • • 

23.04 76 70784 8000 • • • • • • • 

20.21 87 70784 8000 • • • • • • • 

17.09 102 70784 8000 • • • • • • • 

15.51 113 70784 8000 • • • • • • • 

13.52 129 70784 8000 • • • • • • • 

11.48 152 70784 8000 • • • • • • 

8.79 199 70784 8000 • • • • • • 

8.64 203 42470 4800 • • • • • • • 

7.84 223 42470 4800 • • • • • • • 

7.57 231 49548 5600 • • • • • • 

6.84 256 42470 4800 • • • • • • • 

6.43 272 47779 5400 • • • • • • 

5.80 302 37161 4200 • • • • • • 

4.92 356 44682 5050 • • • • • • 

4.44 394 34064 3850 • • • • • • 

3 - 89




Gear Type 

D.168-D48 

123872 lb in 

D.168-Z48 

123872 lb in 

D.168-Z68 

123872 lb in 


3 - 90 

3 / 27 3 / 27 5 / 44 

1) 


10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752198 / 1752 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

71317 0.02 123872 14000 • • • 

63421 0.03 123872 14000 • • • 

55016 0.03 123872 14000 • • • • 

51404 0.03 123872 14000 • • • • 

45210 0.04 123872 14000 • • • • 

39595 0.04 123872 14000 • • • • • 

35022 0.05 123872 14000 • • • • • 

31740 0.06 123872 14000 • • • • • 

28017 0.06 123872 14000 • • • • • 

25274 0.07 123872 14000 • • • • • 

22923 0.08 123872 14000 • • • • • 

20886 0.08 123872 14000 • • • • • 

19103 0.09 123872 14000 • • • • • 

17080 0.10 123872 14000 • • • • • 

17519 0.10 123872 14000 • • • 

15504 0.11 123872 14000 • • • • 

14094 0.12 123872 14000 • • • • 

12661 0.14 123872 14000 • • • • 

10853 0.16 123872 14000 • • • • • 

9819 0.18 123872 14000 • • • • • • 

9064 0.19 123872 14000 • • • • • • 

7881 0.22 123872 14000 • • • • • • 

7156 0.24 123872 14000 • • • • • • 

6534 0.27 123872 14000 • • • • • • 

5995 0.29 123872 14000 • • • • • • 

5523 0.32 123872 14000 • • • • • • 

5016 0.35 123872 14000 • • • • • • 

4569 0.38 123872 14000 • • • • • • 

4186 0.42 123872 14000 • • • • • • 

3735 0.47 123872 14000 • • • • • • 

3333 0.53 123872 14000 • • • • 

2831 0.62 123872 14000 • • • • 

2357 0.74 123872 14000 • • • • 

2319 0.75 123872 14000 • • • • • • 

2070 0.85 123872 14000 • • • • 

1758 1.00 123872 14000 • • • • 

1463 1.20 123872 14000 • • • • 

1226 1.4 123872 14000 • • • • • 

1046 1.7 123872 14000 • • • • • 

871 2.0 123872 14000 • • • 

722 2.4 123872 14000 • • • 

637 2.7 123872 14000 • • • • • 

544 3.2 123872 14000 • • • • • 

453 3.9 123872 14000 • • • 

376 4.7 123872 14000 • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

D.168 

123872 lb in 

Z.168 

123872 lb in 



T 1 1) [Nm / lb in] 

10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 291 / 2575 356 / 3150 580 / 5132 



[-] [rpm] [lb in] [Nm] 90 100 112 132 160 180 200 225 250 280 

341.61 5.1 123872 14000 • 

313.41 5.6 123872 14000 • 

289.23 6.1 123872 14000 • 

268.29 6.5 123872 14000 • 

253.08 6.9 123872 14000 • • 

236.72 7.4 123872 14000 • • 

210.49 8.3 123872 14000 • • • • 

198.71 8.8 123872 14000 • • • • 

178.38 9.8 123872 14000 • • • • • 

163.72 10.7 123872 14000 • • • • • 

141.28 12.4 123872 14000 • • • • • 

123.59 14.2 123872 14000 • • • • • 

107.48 16.3 123872 14000 • • • • • 

94.30 18.6 123872 14000 • • • • • 

79.75 22.0 123872 14000 • • • • • 

72.36 24.0 123872 14000 • • • • • 

63.08 28.0 123872 14000 • • • • • 

53.56 33.0 123872 14000 • • • • 

40.99 43.0 123872 14000 • • • • 

46.61 38 89364 10100 • • • • 

42.09 42 123872 14000 • • • • • 

39.45 44 123872 14000 • • • • • • 

33.88 52 123872 14000 • • • • • • 

29.27 60 123872 14000 • • • • • • • 

25.84 68 123872 14000 • • • • • • • 

23.26 75 123872 14000 • • • • • • • 

19.30 91 123872 14000 • • • • • • • 

17.60 99 122332 13826 • • • • • • • 

15.44 113 119324 13486 • • • • • • • 

13.27 132 115740 13081 • • • • • • • 

10.34 169 109228 12345 • • • • • • 

9.26 189 69456 7850 • • • • • • • 

8.21 213 102831 11622 • • • • • 

7.20 243 62820 7100 • • • • • • 

6.20 282 66421 7507 • • • • • • 

5.61 312 59989 6780 • • • • • • 

4.93 355 62502 7064 • • • • • 

4.46 392 57246 6470 • • • • • 

3 - 91




Gear Type 

D.188-D48 


3 - 92 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752198 / 1752 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

50901 0.03 176960 20000 • • • 

45266 0.04 176960 20000 • • • 

176960 lb in 

39267 0.04 176960 20000 • • • • 

D.188-Z48 

36689 0.05 176960 20000 • • • • 

32268 0.05 176960 20000 • • • • 

28260 0.06 176960 20000 • • • • 

24996 0.07 176960 20000 • • • • • 

22654 0.08 176960 20000 • • • • • 

19997 0.09 176960 20000 • • • • • 

18039 0.10 176960 20000 • • • • • 

16361 0.11 176960 20000 • • • • • 

14907 0.12 176960 20000 • • • • • 

13634 0.13 176960 20000 • • • • • 

12191 0.14 176960 20000 • • • • • 

12504 0.14 176960 20000 • • • 

11066 0.16 176960 20000 • • • • 

176960 lb in 

9037 0.19 176960 20000 • • • • 

D.188-Z68 

7746 0.23 176960 20000 • • • • • 

7008 0.25 176960 20000 • • • • • • 

6469 0.27 176960 20000 • • • • • • 

5625 0.31 176960 20000 • • • • • • 

5107 0.34 176960 20000 • • • • • • 

4663 0.38 176960 20000 • • • • • • 

4279 0.41 176960 20000 • • • • • • 

3942 0.44 176960 20000 • • • • • • 

3580 0.49 176960 20000 • • • • • • 

3261 0.54 176960 20000 • • • • • • 

2988 0.59 176960 20000 • • • • • • 

2666 0.66 176960 20000 • • • • • • 

2379 0.74 176960 20000 • • • • 

2021 0.87 176960 20000 • • • • 

1682 1.00 176960 20000 • • • • 

1655 1.10 176960 20000 • • • • • • 

1477 1.20 176960 20000 • • • • 

1255 1.40 176960 20000 • • • • 

1044 1.70 176960 20000 • • • • 

896 2.0 176960 20000 • • • • • 

746 2.3 176960 20000 • • • 

176960 lb in 

619 2.8 176960 20000 • • • 

546 3.2 176960 20000 • • • • • 

466 3.8 176960 20000 • • • • • 

388 4.5 176960 20000 • • • 

322 5.4 176960 20000 • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

D.188 

176960 lb in 

Z.188 

176960 lb in 



T 1 1) [Nm / lb in] 

20/177 26/230 61/540 98/867 198/1752 198/1752 291/2575 356/3150 580/5132 1290/11414 


(4 pol.) (SF=1) (SF=1) 180TC 210TC 250TC 280TC 320TC 360TC 

[-] [rpm] [lb in] [Nm] 100 112 132 160 180 200 225 250 280 315 

243.82 7.2 176960 20000 • • • • 

220.17 7.9 176960 20000 • • • • • 

206.34 8.5 176960 20000 • • • • • • 

177.23 9.9 176960 20000 • • • • • • 

153.12 11.4 176960 20000 • • • • • • • 

135.16 13.0 176960 20000 • • • • • • • 

121.67 14.4 176960 20000 • • • • • • • 

100.96 17.3 176960 20000 • • • • • • • 

92.06 19.0 176960 20000 • • • • • • • 

80.77 22.0 176960 20000 • • • • • • • 

69.41 25.0 176960 20000 • • • • • • • 

54.06 32.0 176960 20000 • • • • • • • 

42.95 41.0 176960 20000 • • • • • • • 

52.35 33 139002 15710 • • • • 

48.22 36 140860 15920 • • • • • 

41.85 42 142541 16110 • • • • • 

36.89 47 146876 16600 • • • • • • 

32.37 54 163245 18450 • • • • • • 

29.18 60 176960 20000 • • • • • • 

24.77 71 176960 20000 • • • • • • 

23.01 76 176960 20000 • • • • • • 

19.76 89 176960 20000 • • • • • • 

16.86 104 176960 20000 • • • • • • • 

13.28 132 166519 18820 • • • • • • • 

10.69 164 143072 16170 • • • • • • 

9.29 188 126614 14310 • • • • 

8.30 211 115377 13040 • • • 

3 - 93


Quadrilip seals (optional) 

Improvement of Sealing Quality D./Z.38-168 

Breather Element 

3 - 94 

Housing 

4 

2 

Shaft 

4 

1 

3 

3 

• Protected running surface for shaft seal 1 

• No risk of damage during assembly 

• Additional seal-lips against dust 2 

• Separate sealing system prevents damage to the shaft 

through corrosion and dust 

• Rubber coated inner ring and outer ring 3 

• Grease prevents dry run of lips of seals 4 

D./Z.18, 28 and 188 double sealing optional. 

The position of the plug screw is shown in the dimension sheets for the horizontal mounting position (B3,B5). 

When running the gear box, in sizes E.48...E.148 and D./ Z.48 ... D./ Z.188 a breather must replace the plug screw. The breather 

dimensions are as follows. 

Please note that the breather plug must be inserted at other locations for other mounting positions. 

(0.79”) 

20 

E./D./Z. 48 ... 128 E. 148; D./Z. 148 ... 188 

ø27 

(ø1.06”) 

ø22 

(ø0.87”) 

4 

(0.16”) 

(0.95”) 

24 

ø32 

(ø1.26”) 

ø32 

(ø1.26”) 

4 

(0.16”) 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Pin holes 


With housing flange ( C-Type ) for sizes EZ128...EZ148 and DZ/ZZ 108...DZ/ZZ 188, the output side can be pinned. 

The output flanges are designed in a manner, that the permissible torques and radial loads can be transmitted safely by screw 

connection. 

When there is need for additional safety, e.g. operation with heavy shock load, the existing pin holes can be used. 

The gear box can also be bored and pinned together with the machine. In this case the given dimensions should be observed. 

EZ128, DZ/ZZ108 EZ148, DZ/ZZ128 

DZ/ZZ148 DZ/ZZ168, DZ/ZZ188 

With heavy straight pins to DIN 1481: Use existing pinholes in the housing flange. 

With dowel pins to DIN EN 28740 / ISO 8740: 

Note: Bore the mating part together with the housing. 

3 - 95


Dimension Sheets-Overview 

3 - 96 

Type Dimension sheet see page 

E38 3 - 98 

E48 3 - 104 

E68 3 - 110 

E88 3 - 116 

E108 3 - 122 

E128 3 - 128 

E148 3 - 134 

EF38 3 - 100 

EF48 3 - 106 

EF68 3 - 112 

EF88 3 - 118 

EF108 3 - 124 

EF128 3 - 130 

EF148 3 - 136 

EZ38 3 - 102 

EZ48 3 - 108 

EZ68 3 - 114 

EZ88 3 - 120 

EZ108 3 - 126 

EZ128 3 - 132 

EZ148 3 - 138 

D/Z18 3 - 140 

D/Z28 3 - 144 

D/Z38 3 - 148 

D/Z48 3 - 154 

D/Z68 3 - 160 

D/Z88 3 - 166 

D/Z108 3 - 172 

D/Z128 3 - 178 

D/Z148 3 - 184 

D/Z168 3 - 190 

D/Z188 3 - 196 

DF/ZF18 3 - 142 

DF/ZF28 3 - 146 

DF/ZF38 3 - 150 

DF/ZF48 3 - 156 

DF/ZF68 3 - 162 

DF/ZF88 3 - 168 

DF/ZF108 3 - 174 

DF/ZF128 3 - 180 

DF/ZF148 3 - 186 

DF/ZF168 3 - 192 

DF/ZF188 3 - 198 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Type Dimension sheet see page 

DZ/ZZ38 3 - 152 

DZ/ZZ48 3 - 158 

DZ/ZZ68 3 - 164 

DZ/ZZ88 3 - 170 

DZ/ZZ108 3 - 176 

DZ/ZZ128 3 - 182 

DZ/ZZ148 3 - 188 

DZ/ZZ168 3 - 194 

DZ/ZZ188 3 - 200 

Available Output Solid Shaft 

D./Z.38-Z28 ... Z.188-Z68 

DR/ZR88 ... DR/ZR168 

3 - 202 

3 - 204 

3 - 208 

3 - 97


Helical Gear Motors 

Foot mounted 

E 38 E 510 

Mounting 

E F G H J 

4.92 4.33 0.71 0.43 1.38 

Output Shaft 

U V V3 VO UY Y BA TAP M 

0.75 1.57 1.25 0.01 0.83 0.1875 2.2 1/4-20UNC 

Gearcase 

RA AD B A AC D BS DB Z Q QA 

4.49 3.54 5.31 6.1 5.04 2.2 0.12 1.93 2.52 4.33 2.34 

Motor 

E38 Weight [lb] 

Motor C CB P AB AA E38 

LA71 14.51 16.67 5.47 5.75 1/2" + 3/4" 26 

LA71Z 15.26 17.42 5.47 5.75 1/2" + 3/4" 26 

LA80 15.96 18.46 6.16 6.10 1/2" + 3/4" 35 

LA90S 17.19 19.98 6.85 6.42 1/2" + 3/4" 46 

LA90Z 18.96 21.75 6.85 6.42 1/2" + 3/4" 46 

LA100Z 21.75 24.94 7.68 6.61 2 x 3/4" 66 

LA112M 21.28 24.47 8.62 7.13 2 x 3/4" 90 

Tolerances see page 1 - 4 Tap specification see page 1 - 7 

3 - 98 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

125 110 18 11 35 

Output Shaft 


19,05 40 31,75 0,254 21,08 4,763 56 1/4“-20UNC 

Gearcase 

RA AD B A AC D BS DB Z Q QA 

114 90 135 155 128 56 3 49 64 110 59,5 


E 38 E 510 

Motor 

E38 Weight [kg] 


LA71 368.5 423.5 139.0 146.0 1/2" + 3/4" 12 

LA71Z 387.5 442.5 139.0 146.0 1/2" + 3/4" 12 

LA80 405.5 469.0 156.5 155.0 1/2" + 3/4" 16 

LA90S 436.5 507.5 174.0 163.0 1/2" + 3/4" 21 

LA90Z 481.5 552.5 174.0 163.0 1/2" + 3/4" 21 

LA100Z 552.5 633.5 195.0 168.0 2 x 3/4" 30 

LA112M 540.5 621.5 219.0 181.0 2 x 3/4" 41 


[mm] 

3 - 99



Flange mounted 

EF 38 EF 510 

Flange 

BD AK GA AJ BB BF 

4.72 3.15 0.31 3.94 0.12 0.27 

5.51 3.74 0.39 4.53 0.12 0.35 

6.3 4.33 0.39 5.12 0.14 0.35 

7.87 5.12 0.47 6.5 0.14 0.43 

9.84 7.09 0.59 8.46 0.16 0.53 

Output Shaft 

U V V3 VO UY Y AM TAP M 

0.75 1.57 1.25 0.01 0.83 0.1875 1.57 1/4-20UNC 

Gearcase 

AC SA DB Z Q QA 

5.04 2.36 1.93 2.52 4.33 2.34 

Motor 

EF38 Weight [lb] 

Motor C CB P AB AA EF38 

LA71 14.51 16.67 5.47 5.75 1/2" + 3/4" 31 

LA71Z 15.26 17.42 5.47 5.75 1/2" + 3/4" 31 

LA80 15.96 18.46 6.16 6.10 1/2" + 3/4" 42 

LA90S 17.19 19.98 6.85 6.42 1/2" + 3/4" 53 

LA90Z 18.96 21.75 6.85 6.42 1/2" + 3/4" 53 

LA100Z 21.75 24.94 7.68 6.61 2 x 3/4" 73 

LA112M 21.28 24.47 8.62 7.13 2 x 3/4" 95 


3 - 100 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


120 80 8 100 3 6,8 

140 95 10 115 3 9 

160 110 10 130 3,5 9 

200 130 12 165 3,5 11 

250 180 15 215 4 13,5 

Output Shaft 


19,05 40 31,75 0,254 21,08 4,763 40 1/4“-20UNC 

Gearcase 

B AC SA DB Z Q QA 

60,5 128 60 49 64 110 59,5 


EF 38 EF 510 

Motor 

EF38 Weight [kg] 


LA71 368.5 423.5 139.0 146.0 1/2" + 3/4" 14 

LA71Z 387.5 442.5 139.0 146.0 1/2" + 3/4" 14 

LA80 405.5 469.0 156.5 155.0 1/2" + 3/4" 19 

LA90S 436.5 507.5 174.0 163.0 1/2" + 3/4" 24 

LA90Z 481.5 552.5 174.0 163.0 1/2" + 3/4" 24 

LA100Z 552.5 633.5 195.0 168.0 2 x 3/4" 33 

LA112M 540.5 621.5 219.0 181.0 2 x 3/4" 43 


[mm] 

3 - 101




EZ 38 EZ 510 

Flange 

BD AK BB AJ TAP BF BW 

4.72 3.15 0.35 3.94 M8x11 3.94 

Output Shaft 


0.75 1.57 1.25 0.01 0.83 0.1875 2.09 1/4-20UNC 

Gearcase 

A AC SA DB Z Q QA 

5.04 5.04 2.36 1.93 2.52 4.33 2.34 

Motor 

EZ38 Weight [lb] 

Motor C CB P AB AA EZ38 

LA71 14.51 16.67 5.47 5.75 1/2" + 3/4" 24 

LA71Z 15.26 17.42 5.47 5.75 1/2" + 3/4" 24 

LA80 15.96 18.46 6.16 6.10 1/2" + 3/4" 35 

LA90S 17.19 19.98 6.85 6.42 1/2" + 3/4" 44 

LA90Z 18.96 21.75 6.85 6.42 1/2" + 3/4" 44 

LA100Z 21.75 24.94 7.68 6.61 2 x 3/4" 64 

LA112M 21.28 24.47 8.62 7.13 2 x 3/4" 88 


3 - 102 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


120 80 9 100 M8x11 100 

Output Shaft 


19,05 40 31,75 0,254 21,08 4,763 53 1/4“-20UNC 

Gearcase 

A AC SA DB Z Q QA 

128 128 60 49 64 110 59,5 


EZ 38 EZ 510 

Motor 

EZ38 Weight [kg] 


LA71 368.5 423.5 139.0 146.0 1/2" + 3/4" 11 

LA71Z 387.5 442.5 139.0 146.0 1/2" + 3/4" 11 

LA80 405.5 469.0 156.5 155.0 1/2" + 3/4" 16 

LA90S 436.5 507.5 174.0 163.0 1/2" + 3/4" 20 

LA90Z 481.5 552.5 174.0 163.0 1/2" + 3/4" 20 

LA100Z 552.5 633.5 195.0 168.0 2 x 3/4" 29 

LA112M 540.5 621.5 219.0 181.0 2 x 3/4" 40 


[mm] 

3 - 103



Foot mounted 

E 48 E 510 

Mounting 

E F G H J 

5.31 4.72 0.79 0.53 1.42 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 2.95 3/8-16UNC 

Gearcase 

RA AD B A AC D BS DB Z P2 Q QA 

4.72 3.74 5.91 6.61 6.61 3.15 0.12 2.54 3.31 6.04 4.33 2.6 

Motor 



LA71 14.29 16.46 5.47 5.75 1/2" + 3/4" 33 

LA71Z 15.04 17.20 5.47 5.75 1/2" + 3/4" 33 

LA80 15.75 18.25 6.16 6.10 1/2" + 3/4" 44 

LA90S 16.97 19.76 6.85 6.42 1/2" + 3/4" 55 

LA90Z 18.74 21.54 6.85 6.42 1/2" + 3/4" 55 

LA100Z 21.54 24.72 7.68 6.61 2 x 3/4" 75 

LA112Z 21.02 24.21 8.62 7.13 2 x 3/4" 99 

LA132SP 22.38 26.40 10.20 7.68 1" + 3/4" 121 

LA132ZMP 24.19 28.21 10.20 7.68 1" + 3/4" 141 


3 - 104 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

135 120 20 13,5 36 

Output Shaft 


25,4 50 38,1 6,401 28,19 6,35 75 3/8“-16UNC 

Gearcase 

RA AD B A AC D BS DB Z P2 Q QA 

120 95 150 168 168 80 3 64,5 84 153,5 110 66 


E 48 E 510 

Motor 



LA71 363.0 418.0 139.0 146.0 1/2" + 3/4" 15 

LA71Z 382.0 437.0 139.0 146.0 1/2" + 3/4" 15 

LA80 400.0 463.5 156.5 155.0 1/2" + 3/4" 20 

LA90S 431.0 502.0 174.0 163.0 1/2" + 3/4" 25 

LA90Z 476.0 547.0 174.0 163.0 1/2" + 3/4" 25 

LA100Z 547.0 628.0 195.0 168.0 2 x 3/4" 34 

LA112Z 534.0 615.0 219.0 181.0 2 x 3/4" 45 

LA132SP 568.5 670.5 259.0 195.0 1" + 3/4" 55 

LA132ZMP 614.5 716.5 259.0 195.0 1" + 3/4" 64 


[mm] 

3 - 105




EF 48 EF 510 

Flange 


4.72 3.15 0.31 3.94 0.12 0.27 

5.51 3.74 0.39 4.53 0.12 0.35 

6.3 4.33 0.39 5.12 0.14 0.35 

7.87 5.12 0.47 6.5 0.14 0.43 

9.84 7.09 0.59 8.46 0.16 0.53 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 1.97 3/8-16UNC 

Gearcase 

B AC SA DB Z P2 Q QA 

3.19 6.61 2.99 2.54 3.31 6.04 4.33 2.6 

Motor 



LA71 14.29 16.46 5.47 5.75 1/2" + 3/4" 37 

LA71Z 15.04 17.20 5.47 5.75 1/2" + 3/4" 37 

LA80 15.75 18.25 6.16 6.10 1/2" + 3/4" 49 

LA90S 16.97 19.76 6.85 6.42 1/2" + 3/4" 60 

LA90Z 18.74 21.54 6.85 6.42 1/2" + 3/4" 60 

LA100Z 21.54 24.72 7.68 6.61 2 x 3/4" 79 

LA112Z 21.02 24.21 8.62 7.13 2 x 3/4" 104 

LA132SP 22.38 26.40 10.20 7.68 1" + 3/4" 126 

LA132ZMP 24.19 28.21 10.20 7.68 1" + 3/4" 146 


3 - 106 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


120 80 8 100 3 6,8 

140 95 10 115 3 9 

160 110 10 130 3,5 9 

200 130 12 165 3,5 11 

250 180 15 215 4 13,5 

Output Shaft 


25,4 50 38,1 6,401 28,19 6,35 50 3/8“-16UNC 

Gearcase 

B AC SA DB Z P2 Q QA 

81 168 76 64,5 84 153,5 110 66 


EF 48 EF 510 

Motor 



LA71 363.0 418.0 139.0 146.0 1/2" + 3/4" 17 

LA71Z 382.0 437.0 139.0 146.0 1/2" + 3/4" 17 

LA80 400.0 463.5 156.5 155.0 1/2" + 3/4" 22 

LA90S 431.0 502.0 174.0 163.0 1/2" + 3/4" 27 

LA90Z 476.0 547.0 174.0 163.0 1/2" + 3/4" 27 

LA100Z 547.0 628.0 195.0 168.0 2 x 3/4" 36 

LA112Z 534.0 615.0 219.0 181.0 2 x 3/4" 47 

LA132SP 568.5 670.5 259.0 195.0 1" + 3/4" 57 

LA132ZMP 614.5 716.5 259.0 195.0 1" + 3/4" 66 


[mm] 

3 - 107




EZ 48 EZ 510 

Flange 


4.72 3.15 0.35 3.94 M8x11 3.94 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 2.48 3/8-16UNC 

Gearcase 

B A AC SA DB Z P2 Q QA 

3.19 6.61 6.61 2.99 2.54 3.31 6.04 4.33 2.6 

Motor 



LA71 14.29 16.46 5.47 5.75 1/2" + 3/4" 31 

LA71Z 15.04 17.20 5.47 5.75 1/2" + 3/4" 31 

LA80 15.75 18.25 6.16 6.10 1/2" + 3/4" 42 

LA90S 16.97 19.76 6.85 6.42 1/2" + 3/4" 51 

LA90Z 18.74 21.54 6.85 6.42 1/2" + 3/4" 51 

LA100Z 21.54 24.72 7.68 6.61 2 x 3/4" 73 

LA112Z 21.02 24.21 8.62 7.13 2 x 3/4" 97 

LA132SP 22.38 26.40 10.20 7.68 1" + 3/4" 119 

LA132ZMP 24.19 28.21 10.20 7.68 1" + 3/4" 139 


3 - 108 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


120 80 9 100 M8x11 100 

Output Shaft 


25,4 50 38,1 6,401 28,19 6,35 63 3/8“-16UNC 

Gearcase 

B A AC SA DB Z P2 Q QA 

81 168 168 76 64,5 84 153,5 110 66 


EZ 48 EZ 510 

Motor 



LA71 363.0 418.0 139.0 146.0 1/2" + 3/4" 14 

LA71Z 382.0 437.0 139.0 146.0 1/2" + 3/4" 14 

LA80 400.0 463.5 156.5 155.0 1/2" + 3/4" 19 

LA90S 431.0 502.0 174.0 163.0 1/2" + 3/4" 23 

LA90Z 476.0 547.0 174.0 163.0 1/2" + 3/4" 23 

LA100Z 547.0 628.0 195.0 168.0 2 x 3/4" 33 

LA112Z 534.0 615.0 219.0 181.0 2 x 3/4" 44 

LA132SP 568.5 670.5 259.0 195.0 1" + 3/4" 54 

LA132ZMP 614.5 716.5 259.0 195.0 1" + 3/4" 63 


[mm] 

3 - 109



Foot mounted 

E 68 E 510 

Mounting 

E F G H J 

6.69 5.91 0.98 0.69 1.57 

Output Shaft 


1.25 2.36 1.875 0.133 1.36 0.25 3.35 1/2-13UNC 

Gearcase 

RA AD B A AC D BS DB Z P2 P3 Q QA 

6.3 4.92 7.24 8.27 8.27 3.54 0.12 3.07 4.13 7.4 8.94 5.83 3.35 

Motor 



LA71 15.55 17.72 5.47 5.75 1/2" + 3/4" 55 

LA71Z 16.30 18.46 5.47 5.75 1/2" + 3/4" 55 

LA80 17.01 19.51 6.16 6.10 1/2" + 3/4" 66 

LA90S 18.23 21.02 6.85 6.42 1/2" + 3/4" 75 

LA90Z 20.00 22.80 6.85 6.42 1/2" + 3/4" 75 

LA100Z 22.80 25.98 7.68 6.61 2 x 3/4" 97 

LA112Z 22.20 25.39 8.62 7.13 2 x 3/4" 121 

LA132SP 23.46 27.48 10.20 7.68 1" + 3/4" 150 

LA132ZMP 25.28 29.29 10.20 7.68 1" + 3/4" 170 

LA160MP 27.52 32.19 12.34 8.94 1" + 3/4" 223 

LA160ZLP 29.41 34.07 12.34 8.94 1" + 3/4" 223 


3 - 110 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

170 150 25 17,5 40 

Output Shaft 


31,75 60 47,625 3,378 34,54 6,35 85 1/2“-13UNC 


E 68 E 510 

Gearcase 


160 125 184 210 210 90 3 78 105 188 227 148 85 

Motor 



LA71 395.0 450.0 139.0 146.0 1/2" + 3/4" 25 

LA71Z 414.0 469.0 139.0 146.0 1/2" + 3/4" 25 

LA80 432.0 495.5 156.5 155.0 1/2" + 3/4" 30 

LA90S 463.0 534.0 174.0 163.0 1/2" + 3/4" 34 

LA90Z 508.0 579.0 174.0 163.0 1/2" + 3/4" 34 

LA100Z 579.0 660.0 195.0 168.0 2 x 3/4" 44 

LA112Z 564.0 645.0 219.0 181.0 2 x 3/4" 55 

LA132SP 596.0 698.0 259.0 195.0 1" + 3/4" 68 

LA132ZMP 642.0 744.0 259.0 195.0 1" + 3/4" 77 

LA160MP 699.0 817.5 313.5 227.0 1" + 3/4" 101 

LA160ZLP 747.0 865.5 313.5 227.0 1" + 3/4" 101 


[mm] 

3 - 111




EF 68 EF 510 

Flange 


7.87 5.12 0.47 6.5 0.14 0.43 

9.84 7.09 0.59 8.46 0.16 0.53 

11.81 9.06 0.63 10.43 0.16 0.53 

Output Shaft 


1.25 2.36 1.875 0.133 1.36 0.25 2.36 1/2-13UNC 

Gearcase 

B AC SA DB Z P2 P3 Q QA 

3.98 8.27 3.31 3.07 4.13 7.4 8.94 5.83 3.35 

Motor 



LA71 15.55 17.72 5.47 5.75 1/2" + 3/4" 60 

LA71Z 16.30 18.46 5.47 5.75 1/2" + 3/4" 60 

LA80 17.01 19.51 6.16 6.10 1/2" + 3/4" 71 

LA90S 18.23 21.02 6.85 6.42 1/2" + 3/4" 79 

LA90Z 20.00 22.80 6.85 6.42 1/2" + 3/4" 79 

LA100Z 22.80 25.98 7.68 6.61 2 x 3/4" 101 

LA112Z 22.20 25.39 8.62 7.13 2 x 3/4" 126 

LA132SP 23.46 27.48 10.20 7.68 1" + 3/4" 154 

LA132ZMP 25.28 29.29 10.20 7.68 1" + 3/4" 174 

LA160MP 27.52 32.19 12.34 8.94 1" + 3/4" 227 

LA160ZLP 29.41 34.07 12.34 8.94 1" + 3/4" 227 


3 - 112 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


200 130 12 165 3,5 11 

250 180 15 215 4 13,5 

300 230 16 265 4 13,5 

Output Shaft 


31,75 60 47,625 3,378 34,54 6,35 60 1/2“-13UNC 

Gearcase 


101 210 84 78 105 188 227 148 85 


EF 68 EF 510 

Motor 



LA71 395.0 450.0 139.0 146.0 1/2" + 3/4" 27 

LA71Z 414.0 469.0 139.0 146.0 1/2" + 3/4" 27 

LA80 432.0 495.5 156.5 155.0 1/2" + 3/4" 32 

LA90S 463.0 534.0 174.0 163.0 1/2" + 3/4" 36 

LA90Z 508.0 579.0 174.0 163.0 1/2" + 3/4" 36 

LA100Z 579.0 660.0 195.0 168.0 2 x 3/4" 46 

LA112Z 564.0 645.0 219.0 181.0 2 x 3/4" 57 

LA132SP 596.0 698.0 259.0 195.0 1" + 3/4" 70 

LA132ZMP 642.0 744.0 259.0 195.0 1" + 3/4" 79 

LA160MP 699.0 817.5 313.5 227.0 1" + 3/4" 103 

LA160ZLP 747.0 865.5 313.5 227.0 1" + 3/4" 103 


[mm] 

3 - 113




EZ 68 EZ 510 

Flange 


6.3 4.33 0.47 5.12 M10x16 4.92 

Output Shaft 


1.25 2.36 1.875 0.133 1.36 0.25 3.03 1/2-13UNC 

Gearcase 

B A AC SA DB Z P2 P3 Q QA 

3.98 8.27 8.27 3.31 3.07 4.13 7.4 8.94 5.83 3.35 

Motor 



LA71 15.55 17.72 5.47 5.75 1/2" + 3/4" 49 

LA71Z 16.30 18.46 5.47 5.75 1/2" + 3/4" 49 

LA80 17.01 19.51 6.16 6.10 1/2" + 3/4" 60 

LA90S 18.23 21.02 6.85 6.42 1/2" + 3/4" 71 

LA90Z 20.00 22.80 6.85 6.42 1/2" + 3/4" 71 

LA100Z 22.80 25.98 7.68 6.61 2 x 3/4" 90 

LA112Z 22.20 25.39 8.62 7.13 2 x 3/4" 117 

LA132SP 23.46 27.48 10.20 7.68 1" + 3/4" 146 

LA132ZMP 25.28 29.29 10.20 7.68 1" + 3/4" 165 

LA160MP 27.52 32.19 12.34 8.94 1" + 3/4" 218 

LA160ZLP 29.41 34.07 12.34 8.94 1" + 3/4" 218 


3 - 114 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


160 110 12 130 M10x16 125 

Output Shaft 


31,75 60 47,625 3,378 34,54 6,35 77 1/2“-13UNC 

Gearcase 


101 210 210 84 78 105 188 227 148 85 


EZ 68 EZ 510 

Motor 



LA71 395.0 450.0 139.0 146.0 1/2" + 3/4" 22 

LA71Z 414.0 469.0 139.0 146.0 1/2" + 3/4" 22 

LA80 432.0 495.5 156.5 155.0 1/2" + 3/4" 27 

LA90S 463.0 534.0 174.0 163.0 1/2" + 3/4" 32 

LA90Z 508.0 579.0 174.0 163.0 1/2" + 3/4" 32 

LA100Z 579.0 660.0 195.0 168.0 2 x 3/4" 41 

LA112Z 564.0 645.0 219.0 181.0 2 x 3/4" 53 

LA132SP 596.0 698.0 259.0 195.0 1" + 3/4" 66 

LA132ZMP 642.0 744.0 259.0 195.0 1" + 3/4" 75 

LA160MP 699.0 817.5 313.5 227.0 1" + 3/4" 99 

LA160ZLP 747.0 865.5 313.5 227.0 1" + 3/4" 99 


[mm] 

3 - 115



Foot mounted 

E 88 E 510 

Mounting 

E F G H J 

8.46 6.3 1.18 0.69 2.36 

Output Shaft 


1.625 3.15 2.75 0.065 1.79 0.375 4.33 5/8-11UNC 

Gearcase 


7.48 6.3 8.07 10.24 10.24 3.94 0.16 3.9 5.12 9.23 11.1 6.38 3.84 

Motor 



LA90S 18.19 20.98 6.85 6.42 1/2" + 3/4" 115 

LA90Z 19.96 22.76 6.85 6.42 1/2" + 3/4" 115 

LA100Z 22.66 25.85 7.68 6.61 2 x 3/4" 132 

LA112Z 22.03 25.22 8.62 7.13 2 x 3/4" 159 

LA132SP 23.29 27.30 10.20 7.68 1" + 3/4" 185 

LA132ZMP 22.03 25.22 10.20 7.68 1" + 3/4" 205 

LA160MP 27.40 32.07 12.34 8.94 1" + 3/4" 262 

LA160ZLP 29.29 33.96 12.34 8.94 1" + 3/4" 262 

LG180ZMB 31.77 36.57 13.70 12.70 1" + 3/4" 531 

LG180ZLB 31.77 36.57 13.70 12.70 1" + 3/4" 531 


3 - 116 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

215 160 30 17,5 60 

Output Shaft 


41,275 80 69,85 1,651 45,47 9,525 110 5/8“-11UNC 


E 88 E 510 

Gearcase 


190 160 205 260 260 100 4 99 130 234,5 282 162 97,5 

Motor 



LA90S 462.0 533.0 174.0 163.0 1/2" + 3/4" 52 

LA90Z 507.0 578.0 174.0 163.0 1/2" + 3/4" 52 

LA100Z 575.5 656.5 195.0 168.0 2 x 3/4" 60 

LA112Z 559.5 640.5 219.0 181.0 2 x 3/4" 72 

LA132SP 591.5 693.5 259.0 195.0 1" + 3/4" 84 

LA132ZMP 559.5 640.5 259.0 195.0 1" + 3/4" 93 

LA160MP 696.0 814.5 313.5 227.0 1" + 3/4" 119 

LA160ZLP 744.0 862.5 313.5 227.0 1" + 3/4" 119 

LG180ZMB 807.0 929.0 348.0 322.5 1" + 3/4" 241 

LG180ZLB 807.0 929.0 348.0 322.5 1" + 3/4" 241 


[mm] 

3 - 117




EF 88 EF 510 

Flange 


9.84 7.09 0.59 8.46 0.16 0.53 

11.81 9.06 0.63 10.43 0.16 0.53 

13.78 9.84 0.71 11.81 0.2 0.69 

Output Shaft 


1.625 3.15 2.75 0.065 1.79 0.375 3.15 5/8-11UNC 

Gearcase 


4.35 10.24 4.13 3.9 5.12 9.23 11.1 6.38 3.84 

Motor. 



LA90S 18.19 20.98 6.85 6.42 1/2" + 3/4" 119 

LA90Z 19.96 22.76 6.85 6.42 1/2" + 3/4" 119 

LA100Z 22.66 25.85 7.68 6.61 2 x 3/4" 137 

LA112Z 22.03 25.22 8.62 7.13 2 x 3/4" 163 

LA132SP 23.29 27.30 10.20 7.68 1" + 3/4" 187 

LA132ZMP 22.03 25.22 10.20 7.68 1" + 3/4" 209 

LA160MP 27.40 32.07 12.34 8.94 1" + 3/4" 265 

LA160ZLP 29.29 33.96 12.34 8.94 1" + 3/4" 265 

LG180ZMB 31.77 36.57 13.70 12.70 1" + 3/4" 534 

LG180ZLB 31.77 36.57 13.70 12.70 1" + 3/4" 534 


3 - 118 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


250 180 15 215 4 13,5 

300 230 16 265 4 13,5 

350 250 18 300 5 17,5 

Output Shaft 


41,275 80 69,85 1,651 45,47 9,525 80 5/8“-11UNC 

Gearcase 


110,5 260 105 99 130 234,5 282 162 97,5 


EF 88 EF 510 

Motor 



LA90S 462.0 533.0 174.0 163.0 1/2" + 3/4" 54 

LA90Z 507.0 578.0 174.0 163.0 1/2" + 3/4" 54 

LA100Z 575.5 656.5 195.0 168.0 2 x 3/4" 62 

LA112Z 559.5 640.5 219.0 181.0 2 x 3/4" 74 

LA132SP 591.5 693.5 259.0 195.0 1" + 3/4" 85 

LA132ZMP 559.5 640.5 259.0 195.0 1" + 3/4" 95 

LA160MP 696.0 814.5 313.5 227.0 1" + 3/4" 120 

LA160ZLP 744.0 862.5 313.5 227.0 1" + 3/4" 120 

LG180ZMB 807.0 929.0 348.0 322.5 1" + 3/4" 242 

LG180ZLB 807.0 929.0 348.0 322.5 1" + 3/4" 242 


[mm] 

3 - 119




EZ 88 EZ 510 

Flange 


7.48 5.12 0.43 6.5 M12x17 6.3 

Output Shaft 


1.625 3.15 2.75 0.065 1.79 0.375 3.86 5/8-11UNC 

Gearcase 


4.35 10.24 10.24 4.13 3.9 5.12 9.23 11.1 6.38 3.84 

Motor 



LA90S 18.19 20.98 6.85 6.42 1/2" + 3/4" 104 

LA90Z 19.96 22.76 6.85 6.42 1/2" + 3/4" 104 

LA100Z 22.66 25.85 7.68 6.61 2 x 3/4" 121 

LA112Z 22.03 25.22 8.62 7.13 2 x 3/4" 148 

LA132SP 23.29 27.30 10.20 7.68 1" + 3/4" 174 

LA132ZMP 22.03 25.22 10.20 7.68 1" + 3/4" 194 

LA160MP 27.40 32.07 12.34 8.94 1" + 3/4" 251 

LA160ZLP 29.29 33.96 12.34 8.94 1" + 3/4" 251 

LG180ZMB 31.77 36.57 13.70 12.70 1" + 3/4" 520 

LG180ZLB 31.77 36.57 13.70 12.70 1" + 3/4" 520 


3 - 120 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


190 130 11 165 M12x17 160 

Output Shaft 


41,275 80 69,85 1,651 45,47 9,525 98 5/8“-11UNC 

Gearcase 


110,5 260 260 105 99 130 234,5 282 162 97,5 


EZ 88 EZ 510 

Motor 



LA90S 462.0 533.0 174.0 163.0 1/2" + 3/4" 47 

LA90Z 507.0 578.0 174.0 163.0 1/2" + 3/4" 47 

LA100Z 575.5 656.5 195.0 168.0 2 x 3/4" 55 

LA112Z 559.5 640.5 219.0 181.0 2 x 3/4" 67 

LA132SP 591.5 693.5 259.0 195.0 1" + 3/4" 79 

LA132ZMP 559.5 640.5 259.0 195.0 1" + 3/4" 88 

LA160MP 696.0 814.5 313.5 227.0 1" + 3/4" 114 

LA160ZLP 744.0 862.5 313.5 227.0 1" + 3/4" 114 

LG180ZMB 807.0 929.0 348.0 322.5 1" + 3/4" 236 

LG180ZLB 807.0 929.0 348.0 322.5 1" + 3/4" 236 


[mm] 

3 - 121



Foot mounted 

E 108 E 510 

Mounting 

E F G H J 

9.84 7.28 1.38 0.87 2.56 

Output Shaft 


2.125 3.94 3.5 0.043 2.35 0.5 5.51 3/4-10UNC 

Gearcase 


9.45 7.48 9.45 12.05 12.05 4.41 0.16 4.76 6.18 10.98 13.23 7.32 4.53 

Motor 



LA90S 18.68 21.48 6.85 6.42 1/2" + 3/4" 163 

LA90Z 20.45 23.25 6.85 6.42 1/2" + 3/4" 163 

LA100Z 23.13 26.32 7.68 6.61 2 x 3/4" 181 

LA112Z 22.52 25.71 8.62 7.13 2 x 3/4" 207 

LA132SP 23.74 27.76 10.20 7.68 1" + 3/4" 232 

LA132ZMP 25.55 29.57 10.20 7.68 1" + 3/4" 251 

LA160MP 27.89 32.56 12.34 8.94 1" + 3/4" 306 

LA160ZLP 29.78 34.45 12.34 8.94 1" + 3/4" 306 

LG180ZMB 32.13 36.93 13.70 12.70 1" + 3/4" 587 

LG180ZLB 32.13 36.93 13.70 12.70 1" + 3/4" 587 

LG200LB 32.32 37.28 15.16 11.85 1" + 3/4" 697 

K4-LG225S 42.99 52.01 17.40 12.80 2" + 1 1/2" 1041 

K4-LG225ZM 44.96 54.37 17.40 12.80 2" + 1 1/2" 1142 


3 - 122 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

250 185 35 22 65 

Output Shaft 


53,975 100 88,9 1,092 59,69 12,7 140 3/4“-10UNC 


E 108 E 510 

Gearcase 


240 190 240 306 306 112 4 121 157 279 336 186 115 

Motor 



LA90S 474.5 545.5 174.0 163.0 1/2" + 3/4" 74 

LA90Z 519.5 590.5 174.0 163.0 1/2" + 3/4" 74 

LA100Z 587.5 668.5 195.0 168.0 2 x 3/4" 82 

LA112Z 572.0 653.0 219.0 181.0 2 x 3/4" 94 

LA132SP 603.0 705.0 259.0 195.0 1" + 3/4" 105 

LA132ZMP 649.0 751.0 259.0 195.0 1" + 3/4" 114 

LA160MP 708.5 827.0 313.5 227.0 1" + 3/4" 139 

LA160ZLP 756.5 875.0 313.5 227.0 1" + 3/4" 139 

LG180ZMB 816.0 938.0 348.0 322.5 1" + 3/4" 266 

LG180ZLB 816.0 938.0 348.0 322.5 1" + 3/4" 266 

LG200LB 821.0 947.0 385.0 301.0 1" + 3/4" 316 

K4-LGI225S 1092.0 1321.0 442.0 325.0 2" + 1 1/2" 472 

K4-LGI225ZM 1142.0 1381.0 442.0 325.0 2" + 1 1/2" 518 


[mm] 

3 - 123




EF 108 EF 510 

Flange Output Shaft 

BD AK GA AJ BB BF U V V3 VO UY Y AM TAP M 

11.81 9.06 0.63 10.43 0.16 0.53 2.125 3.94 3.5 0.043 2.35 0.5 3.94 3/4-10UNC 

13.78 9.84 0.71 11.81 0.2 0.69 

17.72 13.78 0.87 15.75 0.2 0.69 

Gearcase 


5.16 12.05 4.92 4.76 6.18 10.98 13.35 7.32 4.53 

Motor 



LA90S 18.68 21.48 6.85 6.42 1/2" + 3/4" 185 

LA90Z 20.45 23.25 6.85 6.42 1/2" + 3/4" 185 

LA100Z 23.13 26.32 7.68 6.61 2 x 3/4" 203 

LA112Z 22.52 25.71 8.62 7.13 2 x 3/4" 229 

LA132SP 23.74 27.76 10.20 7.68 1" + 3/4" 251 

LA132ZMP 25.55 29.57 10.20 7.68 1" + 3/4" 271 

LA160MP 27.89 32.56 12.34 8.94 1" + 3/4" 329 

LA160ZLP 29.78 34.45 12.34 8.94 1" + 3/4" 329 

LG180ZMB 32.13 36.93 13.70 12.70 1" + 3/4" 606 

LG180ZLB 32.13 36.93 13.70 12.70 1" + 3/4" 606 

LG200LB 32.32 37.28 15.16 11.85 1" + 3/4" 717 

K4-LG225S 42.99 52.01 17.40 12.80 2" + 1 1/2" 1061 

K4-LG225ZM 44.96 54.37 17.40 12.80 2" + 1 1/2" 1162 

3 - 124 

BD ≥ 17.72" 


[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




EF 108 EF 510 

BD ≥ 450 mm 



300 230 16 265 4 13,5 53,975 100 88,9 1,092 59,69 12,7 100 3/4“-10UNC 

350 250 18 300 5 17,5 

450 350 22 400 5 17,5 

Gearcase 


131 306 125 121 157 279 339 186 115 

Motor 



LA90S 474.5 545.5 174.0 163.0 1/2" + 3/4" 84 

LA90Z 519.5 590.5 174.0 163.0 1/2" + 3/4" 84 

LA100Z 587.5 668.5 195.0 168.0 2 x 3/4" 92 

LA112Z 572.0 653.0 219.0 181.0 2 x 3/4" 104 

LA132SP 603.0 705.0 259.0 195.0 1" + 3/4" 114 

LA132ZMP 649.0 751.0 259.0 195.0 1" + 3/4" 123 

LA160MP 708.5 827.0 313.5 227.0 1" + 3/4" 149 

LA160ZLP 756.5 875.0 313.5 227.0 1" + 3/4" 149 

LG180ZMB 816.0 938.0 348.0 322.5 1" + 3/4" 275 

LG180ZLB 816.0 938.0 348.0 322.5 1" + 3/4" 275 

LG200LB 821.0 947.0 385.0 301.0 1" + 3/4" 325 

K4-LGI225S 1092.0 1321.0 442.0 325.0 2" + 1 1/2" 481 

K4-LGI225ZM 1142.0 1381.0 442.0 325.0 2" + 1 1/2" 527 


[mm] 

3 - 125




EZ 108 EZ 510 

Flange 


9.84 7.09 0.59 8.46 M16x25 7.87 

Output Shaft 


2.125 3.94 3.5 0.043 2.35 0.5 4.8 3/4-10UNC 

Gearcase 


5.16 12.05 12.05 4.92 4.76 6.18 10.98 13.35 7.32 4.53 

Motor 



LA90S 18.68 21.48 6.85 6.42 1/2" + 3/4" 148 

LA90Z 20.45 23.25 6.85 6.42 1/2" + 3/4" 148 

LA100Z 23.13 26.32 7.68 6.61 2 x 3/4" 165 

LA112Z 22.52 25.71 8.62 7.13 2 x 3/4" 192 

LA132SP 23.74 27.76 10.20 7.68 1" + 3/4" 216 

LA132ZMP 25.55 29.57 10.20 7.68 1" + 3/4" 236 

LA160MP 27.89 32.56 12.34 8.94 1" + 3/4" 291 

LA160ZLP 29.78 34.45 12.34 8.94 1" + 3/4" 291 

LG180ZMB 32.13 36.93 13.70 12.70 1" + 3/4" 571 

LG180ZLB 32.13 36.93 13.70 12.70 1" + 3/4" 571 

LG200LB 32.32 37.28 15.16 11.85 1" + 3/4" 681 

K4-LG225S 42.99 52.01 17.40 12.80 2" + 1 1/2" 1025 

K4-LG225ZM 44.96 54.37 17.40 12.80 2" + 1 1/2" 1127 


3 - 126 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


250 180 15 215 M16x25 200 

Output Shaft 


53,975 100 88,9 1,092 59,69 12,7 122 3/4“-10UNC 

Gearcase 


131 306 306 125 121 157 279 339 186 115 


EZ 108 EZ 510 

Motor 



LA90S 474.5 545.5 174.0 163.0 1/2" + 3/4" 67 

LA90Z 519.5 590.5 174.0 163.0 1/2" + 3/4" 67 

LA100Z 587.5 668.5 195.0 168.0 2 x 3/4" 75 

LA112Z 572.0 653.0 219.0 181.0 2 x 3/4" 87 

LA132SP 603.0 705.0 259.0 195.0 1" + 3/4" 98 

LA132ZMP 649.0 751.0 259.0 195.0 1" + 3/4" 107 

LA160MP 708.5 827.0 313.5 227.0 1" + 3/4" 132 

LA160ZLP 756.5 875.0 313.5 227.0 1" + 3/4" 132 

LG180ZMB 816.0 938.0 348.0 322.5 1" + 3/4" 259 

LG180ZLB 816.0 938.0 348.0 322.5 1" + 3/4" 259 

LG200LB 821.0 947.0 385.0 301.0 1" + 3/4" 309 

K4-LGI225S 1092.0 1321.0 442.0 325.0 2" + 1 1/2" 465 

K4-LGI225ZM 1142.0 1381.0 442.0 325.0 2" + 1 1/2" 511 

Tolerances see page 1 - 4 Tap specification see page 1 - 7 * incl.adapter 

[mm] 

3 - 127



Foot mounted 

E 128 E 510 

Mounting 

E F G H J 

12.2 8.27 1.77 0.87 2.76 

Output Shaft 


2.375 4.72 4.25 0.081 2.65 0.625 5.98 3/4-10UNC 

Gearcase 


11.81 9.84 10.24 14.57 14.57 5.51 0.16 5.35 7.28 12.83 15.28 8.54 5.12 

Motor 



LA100Z 23.98 27.17 7.68 6.61 2 x 3/4" 267 

LA112Z 23.33 26.52 8.62 7.13 2 x 3/4" 291 

LA132SP 24.55 28.56 10.20 7.68 1" + 3/4" 313 

LA132ZMP 26.36 30.37 10.20 7.68 1" + 3/4" 333 

LA160MP 28.46 33.13 12.34 8.94 1" + 3/4" 399 

LA160ZLP 30.35 35.02 12.34 8.94 1" + 3/4" 399 

LG180ZMB 32.81 37.62 13.70 12.70 1" + 3/4" 666 

LG180ZLB 32.81 37.62 13.70 12.70 1" + 3/4" 666 

LG200LB 33.01 37.97 15.16 11.85 1" + 3/4" 776 

LG225S 35.81 45.22 17.40 12.80 2" + 1 1/2" 944 

LG225ZM 38.17 47.58 17.40 12.80 2" + 1 1/2" 1045 

LG250ZM 35.81 45.22 17.40 12.80 2" + 1 1/2" 1314 

K4-LGI250ZM 49.88 58.74 19.49 15.43 2 x 2 1/2" 1541 


3 - 128 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

310 210 45 22 70 

Output Shaft 


60,325 120 107,95 2,057 67,31 15,875 152 3/4“-10UNC 


E 128 E 510 

Gearcase 


300 250 260 370 370 140 4 136 185 326 388 217 130 

Motor 



LA100Z 609.0 690.0 195.0 168.0 2 x 3/4" 121 

LA112Z 592.5 673.5 219.0 181.0 2 x 3/4" 132 

LA132SP 623.5 725.5 259.0 195.0 1" + 3/4" 142 

LA132ZMP 669.5 771.5 259.0 195.0 1" + 3/4" 151 

LA160MP 723.0 841.5 313.5 227.0 1" + 3/4" 181 

LA160ZLP 771.0 889.5 313.5 227.0 1" + 3/4" 181 

LG180ZMB 833.5 955.5 348.0 322.5 1" + 3/4" 302 

LG180ZLB 833.5 955.5 348.0 322.5 1" + 3/4" 302 

LG200LB 838.5 964.5 385.0 301.0 1" + 3/4" 352 

LG225S 909.5 1148.5 442.0 325.0 2" + 1 1/2" 428 

LG225ZM 969.5 1208.5 442.0 325.0 2" + 1 1/2" 474 

K4-LGI250M 909.5 1148.5 442.0 325.0 2" + 1 1/2" 596 

K4-LGI250ZM 1267.0 1492.0 495.0 392.0 2 x 2 1/2" 699 


[mm] 

3 - 129




EF 128 EF 510 


BD AK GA AJ U V V3 VO UY Y AM TAP M 

13.78 9.84 0.71 11.81 2.375 4.72 4.25 0.081 2.65 0.625 4.72 3/4-10UNC 

17.72 13.78 0.87 15.75 

Gearcase 

B BB AC SA DB Z P2 P3 Q QA BF 

5.35 0.2 14.57 5.91 5.35 7.28 12.83 15.28 8.54 5.12 0.69 

Motor 



LA100Z 23.98 27.17 7.68 6.61 2 x 3/4" 276 

LA112Z 23.33 26.52 8.62 7.13 2 x 3/4" 302 

LA132SP 24.55 28.56 10.20 7.68 1" + 3/4" 322 

LA132ZMP 26.36 30.37 10.20 7.68 1" + 3/4" 342 

LA160MP 28.46 33.13 12.34 8.94 1" + 3/4" 408 

LA160ZLP 30.35 35.02 12.34 8.94 1" + 3/4" 408 

LG180ZMB 32.81 37.62 13.70 12.70 1" + 3/4" 675 

LG180ZLB 32.81 37.62 13.70 12.70 1" + 3/4" 675 

LG200LB 33.01 37.97 15.16 11.85 1" + 3/4" 785 

LG225S 35.81 45.22 17.40 12.80 2" + 1 1/2" 953 

LG225ZM 38.17 47.58 17.40 12.80 2" + 1 1/2" 1054 

LG250ZM 35.81 45.22 17.40 12.80 2" + 1 1/2" 1323 

K4-LGI250ZM 49.88 58.74 19.49 15.43 2 x 2 1/2" 1550 

3 - 130 

BD ≥ 17.72" 


[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




EF 128 EF 510 

BD ≥ 450 mm 



350 250 18 300 60,325 120 107,95 2,057 67,31 15,875 120 3/4“-10UNC 

450 350 22 400 

Gearcase 


136 5 370 150 136 185 326 388 217 130 17,5 

Motor 



LA100Z 609.0 690.0 195.0 168.0 2 x 3/4" 125 

LA112Z 592.5 673.5 219.0 181.0 2 x 3/4" 137 

LA132SP 623.5 725.5 259.0 195.0 1" + 3/4" 146 

LA132ZMP 669.5 771.5 259.0 195.0 1" + 3/4" 155 

LA160MP 723.0 841.5 313.5 227.0 1" + 3/4" 185 

LA160ZLP 771.0 889.5 313.5 227.0 1" + 3/4" 185 

LG180ZMB 833.5 955.5 348.0 322.5 1" + 3/4" 306 

LG180ZLB 833.5 955.5 348.0 322.5 1" + 3/4" 306 

LG200LB 838.5 964.5 385.0 301.0 1" + 3/4" 356 

LG225S 909.5 1148.5 442.0 325.0 2" + 1 1/2" 432 

LG225ZM 969.5 1208.5 442.0 325.0 2" + 1 1/2" 478 

K4-LGI250M 909.5 1148.5 442.0 325.0 2" + 1 1/2" 600 

K4-LGI250ZM 1267.0 1492.0 495.0 392.0 2 x 2 1/2" 703 


[mm] 

3 - 131




EZ 128 EZ 510 

Flange 


11.81 7.87 0.83 9.84 M16x28 9.84 

Output Shaft 


2.375 4.72 4.25 0.081 2.65 0.625 5.83 3/4-10UNC 

Gearcase 


5.35 14.57 14.57 5.91 5.35 7.28 12.83 15.28 8.54 5.12 

Motor 



LA100Z 23.98 27.17 7.68 6.61 2 x 3/4" 238 

LA112Z 23.33 26.52 8.62 7.13 2 x 3/4" 262 

LA132SP 24.55 28.56 10.20 7.68 1" + 3/4" 284 

LA132ZMP 26.36 30.37 10.20 7.68 1" + 3/4" 304 

LA160MP 28.46 33.13 12.34 8.94 1" + 3/4" 370 

LA160ZLP 30.35 35.02 12.34 8.94 1" + 3/4" 370 

LG180ZMB 32.81 37.62 13.70 12.70 1" + 3/4" 637 

LG180ZLB 32.81 37.62 13.70 12.70 1" + 3/4" 637 

LG200LB 33.01 37.97 15.16 11.85 1" + 3/4" 747 

LG225S 35.81 45.22 17.40 12.80 2" + 1 1/2" 915 

LG225ZM 38.17 47.58 17.40 12.80 2" + 1 1/2" 1017 

LG250ZM 35.81 45.22 17.40 12.80 2" + 1 1/2" 1286 

K4-LGI250ZM 49.88 58.74 19.49 15.43 2 x 2 1/2" 1513 

Tolerances see page 1 - 4 Tap specification see page 1 - 7 Note see page 3 - 93 

3 - 132 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


300 200 21 250 M16x28 250 

Output Shaft 


60,325 120 107,95 2,057 67,31 15,875 148 3/4“-10UNC 

Gearcase 


136 370 370 150 136 185 326 388 217 130 


EZ 128 EZ 510 

Motor 



LA100Z 609.0 690.0 195.0 168.0 2 x 3/4" 108 

LA112Z 592.5 673.5 219.0 181.0 2 x 3/4" 119 

LA132SP 623.5 725.5 259.0 195.0 1" + 3/4" 129 

LA132ZMP 669.5 771.5 259.0 195.0 1" + 3/4" 138 

LA160MP 723.0 841.5 313.5 227.0 1" + 3/4" 168 

LA160ZLP 771.0 889.5 313.5 227.0 1" + 3/4" 168 

LG180ZMB 833.5 955.5 348.0 322.5 1" + 3/4" 289 

LG180ZLB 833.5 955.5 348.0 322.5 1" + 3/4" 289 

LG200LB 838.5 964.5 385.0 301.0 1" + 3/4" 339 

LG225S 909.5 1148.5 442.0 325.0 2" + 1 1/2" 415 

LG225ZM 969.5 1208.5 442.0 325.0 2" + 1 1/2" 461 

K4-LGI250M 909.5 1148.5 442.0 325.0 2" + 1 1/2" 583 

K4-LGI250ZM 1267.0 1492.0 495.0 392.0 2 x 2 1/2" 686 


[mm] 

3 - 133



Foot mounted 

E 148 E 510 

Mounting 

E F G H J 

13.39 9.45 1.97 1.38 4.33 

Output Shaft 


2.75 5.51 4.25 0.671 3.03 0.625 6.89 3/4-10UNC 

Gearcase 


13.39 11.18 12.6 17.72 16.38 6.3 0.2 6.02 8.19 14.41 17.76 9.37 5.71 

Motor 



LA132SP 25.06 29.07 10.20 7.68 1" + 3/4" 373 

LA132ZMP 26.87 30.89 10.20 7.68 1" + 3/4" 392 

LA160MP 29.00 33.66 12.34 8.94 1" + 3/4" 448 

LA160ZLP 30.89 35.55 12.34 8.94 1" + 3/4" 448 

LG180ZMB 33.35 38.15 13.70 12.70 1" + 3/4" 723 

LG180ZLB 33.35 38.15 13.70 12.70 1" + 3/4" 723 

LG200LB 33.54 38.50 15.16 11.85 1" + 3/4" 833 

LG225S 36.34 45.75 17.40 12.80 2" + 1 1/2" 997 

LG225ZM 38.70 48.11 17.40 12.80 2" + 1 1/2" 1098 

LG250ZM 42.78 51.65 17.40 12.80 2" + 1 1/2" 1422 

K4-LGI280ZM 55.35 64.29 19.49 15.43 2 x 2 1/2" 1707 


3 - 134 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

340 240 50 35 110 

Output Shaft 


69,85 140 107,95 17,043 76,96 15,875 175 3/4“-10UNC 


E 148 E 510 

Gearcase 


340 284 320 450 416 160 5 153 208 366 451 238 145 

Motor 



LA132SP 636.5 738.5 259.0 195.0 1" + 3/4" 169 

LA132ZMP 682.5 784.5 259.0 195.0 1" + 3/4" 178 

LA160MP 736.5 855.0 313.5 227.0 1" + 3/4" 203 

LA160ZLP 784.5 903.0 313.5 227.0 1" + 3/4" 203 

LG180ZMB 847.0 969.0 348.0 322.5 1" + 3/4" 328 

LG180ZLB 847.0 969.0 348.0 322.5 1" + 3/4" 328 

LG200LB 852.0 978.0 385.0 301.0 1" + 3/4" 378 

LG225S 923.0 1162.0 442.0 325.0 2" + 1 1/2" 452 

LG225ZM 983.0 1222.0 442.0 325.0 2" + 1 1/2" 498 

LG250ZM 1086.5 1312.0 442.0 325.0 2" + 1 1/2" 645 

K4-LGI280ZM 1406.0 1633.0 495.0 392.0 2 x 2 1/2" 774 


[mm] 

3 - 135




EF 148 EF 510 



13.78 9.84 0.71 11.81 2.75 5.51 4.25 0.671 3.03 0.625 5.51 3/4-10UNC 

17.72 13.78 0.87 15.75 

21.65 17.72 0.98 19.69 

Gearcase 


6.38 0.2 16.38 6.69 6.02 8.19 14.41 17.76 9.37 5.71 0.69 

Motor 



LA132SP 25.06 29.07 10.20 7.68 1" + 3/4" 397 

LA132ZMP 26.87 30.89 10.20 7.68 1" + 3/4" 419 

LA160MP 29.00 33.66 12.34 8.94 1" + 3/4" 472 

LA160ZLP 30.89 35.55 12.34 8.94 1" + 3/4" 472 

LG180ZMB 33.35 38.15 13.70 12.70 1" + 3/4" 750 

LG180ZLB 33.35 38.15 13.70 12.70 1" + 3/4" 750 

LG200LB 33.54 38.50 15.16 11.85 1" + 3/4" 860 

LG225S 36.34 45.75 17.40 12.80 2" + 1 1/2" 1023 

LG225ZM 38.70 48.11 17.40 12.80 2" + 1 1/2" 1125 

LG250ZM 42.78 51.65 17.40 12.80 2" + 1 1/2" 1449 

K4-LGI280ZM 55.35 64.29 19.49 15.43 2 x 2 1/2" 1954 

3 - 136 

BD ≥ 17.72" 


[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




EF 148 EF 510 

BD ≥ 450 mm 



350 250 18 300 69,85 140 107,95 17,043 76,96 15,875 140 3/4“-10UNC 

450 350 22 400 

550 450 25 500 

Gearcase 


162 5 416 170 153 208 366 451 238 145 17,5 

Motor 



LA132SP 636.5 738.5 259.0 195.0 1" + 3/4" 180 

LA132ZMP 682.5 784.5 259.0 195.0 1" + 3/4" 190 

LA160MP 736.5 855.0 313.5 227.0 1" + 3/4" 214 

LA160ZLP 784.5 903.0 313.5 227.0 1" + 3/4" 214 

LG180ZMB 847.0 969.0 348.0 322.5 1" + 3/4" 340 

LG180ZLB 847.0 969.0 348.0 322.5 1" + 3/4" 340 

LG200LB 852.0 978.0 385.0 301.0 1" + 3/4" 390 

LG225S 923.0 1162.0 442.0 325.0 2" + 1 1/2" 464 

LG225ZM 983.0 1222.0 442.0 325.0 2" + 1 1/2" 510 

LG250ZM 1086.5 1312.0 442.0 325.0 2" + 1 1/2" 657 

K4-LGI280ZM 1406.0 1633.0 495.0 392.0 2 x 2 1/2" 886 


[mm] 

3 - 137




EZ 148 EZ 510 

Flange 


13.39 9.45 0.98 11.81 M16x28 12.68 

Output Shaft 


2.75 5.51 4.25 0.671 3.03 0.625 6.81 3/4-10UNC 

Gearcase 


6.38 16.38 16.38 6.69 6.02 8.19 14.41 17.76 9.37 5.71 

Motor 



LA132SP 25.06 29.07 10.20 7.68 1" + 3/4" 340 

LA132ZMP 26.87 30.89 10.20 7.68 1" + 3/4" 359 

LA160MP 29.00 33.66 12.34 8.94 1" + 3/4" 415 

LA160ZLP 30.89 35.55 12.34 8.94 1" + 3/4" 415 

LG180ZMB 33.35 38.15 13.70 12.70 1" + 3/4" 690 

LG180ZLB 33.35 38.15 13.70 12.70 1" + 3/4" 690 

LG200LB 33.54 38.50 15.16 11.85 1" + 3/4" 800 

LG225S 36.34 45.75 17.40 12.80 2" + 1 1/2" 964 

LG225ZM 38.70 48.11 17.40 12.80 2" + 1 1/2" 1065 

LG250ZM 42.78 51.65 17.40 12.80 2" + 1 1/2" 1389 

K4-LGI280ZM 55.35 64.29 19.49 15.43 2 x 2 1/2" 1894 


3 - 138 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


340 240 25 300 M16x28 322 

Output Shaft 


69,85 140 107,95 17,043 76,96 15,875 173 3/4“-10UNC 

Gearcase 


162 416 416 170 153 208 366 451 238 145 


EZ 148 EZ 510 

Motor 



LA132SP 636.5 738.5 259.0 195.0 1" + 3/4" 154 

LA132ZMP 682.5 784.5 259.0 195.0 1" + 3/4" 163 

LA160MP 736.5 855.0 313.5 227.0 1" + 3/4" 188 

LA160ZLP 784.5 903.0 313.5 227.0 1" + 3/4" 188 

LG180ZMB 847.0 969.0 348.0 322.5 1" + 3/4" 313 

LG180ZLB 847.0 969.0 348.0 322.5 1" + 3/4" 313 

LG200LB 852.0 978.0 385.0 301.0 1" + 3/4" 363 

LG225S 923.0 1162.0 442.0 325.0 2" + 1 1/2" 437 

LG225ZM 983.0 1222.0 442.0 325.0 2" + 1 1/2" 483 

LG250ZM 1086.5 1312.0 442.0 325.0 2" + 1 1/2" 630 

K4-LGI280ZM 1406.0 1633.0 495.0 392.0 2 x 2 1/2" 859 


[mm] 

3 - 139



Foot mounted 

D/Z 18 DZ 510 

Mounting 

E F G H J 

4,33 4.33 0.47 0.35 0.98 

Output Shaft 


0.75 1.57 1.25 0.01 0.83 0.1875 2.28 1/4-20UNC 

Gearcase 

KL B A AC AD D BS DB P1 P2 Q 

2.76 5.16 5.31 4.13 5.39 2.95 0.12 0.07 2.28 2.13 5.61 

Motor 

Z18 / D18 Weight [lb] 

Motor C CB P AB AA Z18 D18 

LA71 12.87 15.04 5.47 5.75 1/2" + 3/4" 18 18 

LA71Z 13.62 15.79 5.47 5.75 1/2" + 3/4" 18 18 


3 - 140 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

110 110 12 9 25 

Output Shaft 


19,05 40 31,75 0,254 21,08 4,763 58 1/4“-20UNC 

Gearcase 


70 131 135 105 137 75 3 1,8 58 54 142,5 


D/Z 18 DZ 510 

Motor 

Z18 / D18 Weight [kg] 


LA71 327.0 382.0 139.0 146.0 1/2" + 3/4" 8 8 

LA71Z 346.0 401.0 139.0 146.0 1/2" + 3/4" 8 8 


[mm] 

3 - 141




DF/ZF 18 DZF 510 

Flange 

BD AK GA AJ BB GL BF 

4.72 3.15 0.31 3.94 0.12 1.1 0.26 

5.51 3.74 0.35 4.53 0.12 1.06 0.35 

6.3 4.33 0.35 5.12 0.14 1.06 0.35 

Output Shaft 


0.75 1.57 1.25 0.01 0.83 0.1875 1.57 1/4-20UNC 

Gearcase 

KL AD SA DB P2 Q GAL 

3.05 

Motor 

ZF / DF18 Weight [lb] 

Motor C CB P AB AA ZF18 DF18 

LA71 13.19 15.35 5.43 4.67 2x1/2" 18 20 

LA71Z 13.94 16.10 5.43 4.67 2x1/2" 18 20 


3 - 142 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


120 80 8 100 3 28 6,6 

140 95 9 115 3 27 9 

160 110 9 130 3,5 27 9 

Output Shaft 


19,05 40 31,75 0,254 21,08 4,763 40 1/4“-20UNC 

Gearcase 


70 137 77,5 1,8 54 150,5 29 



Motor 

ZF18 / DF18 Weight [kg] 

Motor C CB P AB AA ZF18 DF18 

LA71 335.0 390.0 138.0 118,5 2x1/2" 8 9 

LA71Z 354.0 409.0 138.0 118,5 2x1/2" 8 9 


[mm] 

3 - 143



Foot mounted 

D/Z 28 DZ 510 

Mounting 

E F G H J 

4.33 5.12 0.69 0.35 1.06 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 2.95 3/8-16UNC 

Gearcase 


2.2 5.98 5.51 4.13 5.63 3.54 0.12 0.24 2.05 2.01 5.31 

Motor 

Z28 / D28 Weight [lb] 


LA71 13.29 15.45 5.47 5.75 1/2" + 3/4" 20 20 

LA71Z 14.04 16.20 5.47 5.75 1/2" + 3/4" 20 20 

LA90S 17.11 19.90 6.85 6.42 1/2" + 3/4" 40 42 

LA90Z 18.88 21.67 6.85 6.42 1/2" + 3/4" 40 42 


3 - 144 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

110 130 17,5 9 27 

Output Shaft 


25,4 50 38,1 6,401 28,19 6,35 75 3/8“-16UNC 

Gearcase 


56 152 140 105 143 90 3 6,2 52 51 135 


D/Z 28 DZ 510 

Motor 

Z28 / D28 Weight [kg] 


LA71 337.5 392.5 139.0 146.0 1/2" + 3/4" 9 9 

LA71Z 356.5 411.5 139.0 146.0 1/2" + 3/4" 9 9 

LA90S 434.5 505.5 174.0 163.0 1/2" + 3/4" 18 19 

LA90Z 479.5 550.5 174.0 163.0 1/2" + 3/4" 18 19 


[mm] 

3 - 145





Flange 


4.72 3.15 0.31 3.94 0.12 1.1 0.26 

5.51 3.74 0.35 4.53 0.12 1.06 0.35 

6.3 4.33 0.35 5.12 0.14 1.06 0.35 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 1.97 3/8-16UNC 

Gearcase 


2.2 5.59 3.54 0.12 2.05 5.55 1.1 

Motor 

ZF28 DF28 Weight [lb] 

Motor C CB C CB P AB AA ZF28 DF28 

LA71 13.52 15.69 13.29 15.69 5.47 5.75 1/2" + 3/4" 20 20 

LA71Z 14.27 16.44 14.04 16.44 5.47 5.75 1/2" + 3/4" 20 20 

LA90S 17.34 20.14 17.34 20.14 6.85 7.28 1/2" + 3/4" 40 42 

LA90L 17.34 20.14 17.34 20.14 6.85 7.28 1/2" + 3/4" 40 42 

LA90ZL 19.11 21.91 19.11 21.91 6.85 7.28 1/2" + 3/4" 46 49 


3 - 146 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


120 80 8 100 3 28 6,6 

140 95 9 115 3 27 9 

160 110 9 130 3,5 27 9 

Output Shaft 


25,4 50 38,1 6,401 27,94 6,35 50 3/8“-16UNC 

Gearcase 


56 142 90 6,2 52 141 28 



Motor 

ZF28 DF28 Weight [kg] 


LA71 343.5 398.5 337.5 398.5 139.0 146.0 1/2" + 3/4" 9 9 

LA71Z 362.5 417.5 356.5 417.5 139.0 146.0 1/2" + 3/4" 9 9 

LA90S 440.5 511.5 440.5 511.5 174.0 185.0 1/2" + 3/4" 18 19 

LA90L 440.5 511.5 440.5 511.5 174.0 185.0 1/2" + 3/4" 18 19 

LA90ZL 485.5 556.5 485.5 556.5 174.0 185.0 1/2" + 3/4" 21 22 


[mm] 

3 - 147



Foot mounted 

D/Z 38 DZ 510 

Mounting 

E F G H J 

4.33 5.12 0.79 0.39 1.38 

Output Shaft 


1 1.97 1.5 0.252 1.1 0.25 2.95 3/8-16UNC 

Gearcase 

BD KL BW B A AC AD D BS P2 Q 

4.72 3.11 3.94 6.3 5.71 5.04 6.42 3.54 0.12 2.72 5.51 

Motor 

Z38 D38 Weight [lb] 

Motor C CB C CB P AB AA Z38 D38 

LA71 15.69 17.85 16.28 18.44 5.47 5.75 1/2" + 3/4" 35 37 

LA71Z 16.44 18.60 17.03 19.19 5.47 5.75 1/2" + 3/4" 35 37 

LA80 17.15 19.65 17.74 20.24 6.16 6.10 1/2" + 3/4" 46 49 

LA90S 18.37 21.16 18.96 21.75 6.85 6.42 1/2" + 3/4" 57 60 

LA90Z 20.14 22.93 20.73 23.52 6.85 6.42 1/2" + 3/4" 57 60 

LA100Z 22.93 26.12 - - 7.68 6.61 2x3/4" 77 - 


3 - 148 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

110 130 20 9,8 35 

Output Shaft 


25,4 50 38,1 6,401 27,94 6,35 75 3/8“-16UNC 

Gearcase 


120 79 100 160 145 128 163 90 3 69 140 


D/Z 38 DZ 510 

Motor 

Z38 D38 Weight [kg] 


LA71 398.5 453.5 413.5 468.5 139.0 146.0 1/2" + 3/4" 16 17 

LA71Z 417.5 472.5 432.5 487.5 139.0 146.0 1/2" + 3/4" 16 17 

LA80 435.5 499.0 450.5 514.0 156.5 155.0 1/2" + 3/4" 21 22 

LA90S 466.5 537.5 481.5 552.5 174.0 163.0 1/2" + 3/4" 26 27 

LA90Z 511.5 582.5 526.5 597.5 174.0 163.0 1/2" + 3/4" 26 27 

LA100Z 582.5 663.5 - - 195.0 168.0 2x3/4" 35 - 


[mm] 

3 - 149





Flange 


4.72 3.15 0.31 3.94 0.12 0.91 0.27 

5.51 3.74 0.39 4.53 0.12 1.02 0.35 

6.3 4.33 0.39 5.12 0.14 1.02 0.35 

7.87 5.12 0.47 6.5 0.14 0.94 0.43 

9.84 7.09 0.59 8.46 0.16 0.83 0.53 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 1.97 3/8-16UNC 

Gearcase 

KL AC AD SA P2 Q 

2.72 5.04 6.42 3.62 2.72 5.51 

Motor 



LA71 15.69 17.85 16.28 18.44 5.47 5.75 1/2" + 3/4" 37 40 

LA71Z 16.44 18.60 17.03 19.19 5.47 5.75 1/2" + 3/4" 37 40 

LA80 17.15 19.65 17.74 20.24 6.16 6.10 1/2" + 3/4" 49 49 

LA90S 18.37 21.16 18.96 21.75 6.85 6.42 1/2" + 3/4" 57 60 

LA90Z 20.14 22.93 20.73 23.52 6.85 6.42 1/2" + 3/4" 57 60 

LA100Z 22.93 26.12 - - 7.68 6.61 2x3/4" 77 - 


3 - 150 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


120 80 8 100 3 23 6,8 

140 95 10 115 3 26 9 

160 110 10 130 3,5 26 9 

200 130 12 165 3,5 24 11 

250 180 15 215 4 21 13,5 

Output Shaft 


25,4 50 38,1 6,401 28,19 6,35 50 3/8“-16UNC 

Gearcase 


69 128 163 92 69 140 



Motor 



LA71 398.5 453.5 413.5 468.5 139.0 146.0 1/2" + 3/4" 17 18 

LA71Z 417.5 472.5 432.5 487.5 139.0 146.0 1/2" + 3/4" 17 18 

LA80 435.5 499.0 450.5 514.0 156.5 155.0 1/2" + 3/4" 22 22 

LA90S 466.5 537.5 481.5 552.5 174.0 163.0 1/2" + 3/4" 26 27 

LA90Z 511.5 582.5 526.5 597.5 174.0 163.0 1/2" + 3/4" 26 27 

LA100Z 582.5 663.5 - - 195.0 168.0 2 x 3/4" 35 - 


[mm] 

3 - 151




DZ/ZZ 38 DZZ 510 

Flange 

BD AK BW AJ BB TAP BF 

4.72 3.15 3.94 3.94 0.39 M8x11 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 2.48 3/8-16UNC 

Gearcase 


2.72 5.04 6.42 3.62 2.72 5.51 

Motor 

ZZ38 DZ38 Weight [lb] 

Motor C CB C CB P AB AA ZZ38 DZ38 

LA71 15.69 17.85 16.28 18.44 5.47 5.75 1/2" + 3/4" 33 35 

LA71Z 16.44 18.60 17.03 19.19 5.47 5.75 1/2" + 3/4" 33 35 

LA80 17.15 19.65 17.74 20.24 6.16 6.10 1/2" + 3/4" 44 46 

LA90S 18.37 21.16 18.96 21.75 6.85 6.42 1/2" + 3/4" 53 55 

LA90Z 20.14 22.93 20.73 23.52 6.85 6.42 1/2" + 3/4" 53 55 

LA100Z 22.93 26.12 - - 7.68 6.61 2x3/4" 73 - 


3 - 152 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


120 80 100 100 10 M8x11 

Output Shaft 


25,4 50 38,1 6,4 28,19 6,35 63 3/8“-16UNC 

Gearcase 


69 128 163 92 69 140 



Motor 

ZZ38 DZ38 Weight [kg] 


LA71 398.5 453.5 413.5 468.5 139.0 146.0 1/2" + 3/4" 15 16 

LA71Z 417.5 472.5 432.5 487.5 139.0 146.0 1/2" + 3/4" 15 16 

LA80 435.5 499.0 450.5 514.0 156.5 155.0 1/2" + 3/4" 20 21 

LA90S 466.5 537.5 481.5 552.5 174.0 163.0 1/2" + 3/4" 24 25 

LA90Z 511.5 582.5 526.5 597.5 174.0 163.0 1/2" + 3/4" 24 25 

LA100Z 582.5 663.5 - - 195.0 168.0 2x3/4" 33 - 


[mm] 

3 - 153



Foot mounted 

D/Z 48 DZ 510 

Mounting 

E F G H J 

5.31 6.5 0.98 0.53 2.17 

Output Shaft 


1.375 2.76 2.375 0.027 1.51 0.3125 3.96 3/8-16UNC 

Gearcase 


6.3 3.15 4.92 7.87 7.68 6.61 8.66 4.53 0.12 3.46 6.81 

Motor 



LA71 16.77 18.94 17.44 19.61 5.47 5.75 1/2" + 3/4" 57 60 

LA71Z 17.52 19.69 18.19 20.35 5.47 5.75 1/2" + 3/4" 57 60 

LA80 18.23 20.73 18.90 21.40 6.16 6.10 1/2" + 3/4" 68 71 

LA90S 19.45 22.24 20.12 22.91 6.85 6.42 1/2" + 3/4" 77 79 

LA90Z 21.22 24.02 21.89 24.69 6.85 6.42 1/2" + 3/4" 77 79 

LA100Z 24.02 27.20 24.69 27.87 7.68 6.61 2x3/4" 97 99 

LA112Z 23.50 26.69 - - 8.62 7.13 2x3/4" 123 - 

LA132SP 24.84 28.86 - - 10.20 7.68 1"+3/4" 146 - 

LA132ZMP 26.65 30.67 - - 10.20 7.68 1"+3/4" 165 - 


3 - 154 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

135 165 25 13,5 55 

Output Shaft 


34,925 70 60,325 0,686 38,35 7,938 100,5 3/8“-16UNC 

Gearcase 


160 80 125 200 195 168 220 115 3 88 173 


D/Z 48 DZ 510 

Motor 



LA71 426.0 481.0 443.0 498.0 139.0 146.0 1/2" + 3/4" 26 27 

LA71Z 445.0 500.0 462.0 517.0 139.0 146.0 1/2" + 3/4" 26 27 

LA80 463.0 526.5 480.0 543.5 156.5 155.0 1/2" + 3/4" 31 32 

LA90S 494.0 565.0 511.0 582.0 174.0 163.0 1/2" + 3/4" 35 36 

LA90Z 539.0 610.0 556.0 627.0 174.0 163.0 1/2" + 3/4" 35 36 

LA100Z 610.0 691.0 627.0 708.0 195.0 168.0 2 x 3/4" 44 45 

LA112Z 597.0 678.0 - - 219.0 181.0 2 x 3/4" 56 - 

LA132SP 631.0 733.0 - - 259.0 195.0 1" + 3/4" 66 - 

LA132ZMP 677.0 779.0 - - 259.0 195.0 1" + 3/4" 75 - 


[mm] 

3 - 155





Flange 


7.87 5.12 0.47 6.5 0.14 1.14 0.43 

9.84 7.09 0.59 8.46 0.16 1.02 0.53 

11.81 9.06 0.59 10.43 0.16 1.02 0.53 

Output Shaft 


1.375 2.76 2.375 0.027 1.51 0.3125 2.76 3/8-16UNC 

Gearcase 


3.15 6.61 8.66 4.61 3.46 6.81 

Motor 



LA71 16.77 18.94 17.44 19.61 5.47 5.75 1/2" + 3/4" 60 62 

LA71Z 17.52 19.69 18.19 20.35 5.47 5.75 1/2" + 3/4" 60 62 

LA80 18.23 20.73 18.90 21.40 6.16 6.10 1/2" + 3/4" 71 73 

LA90S 19.45 22.24 20.12 22.91 6.85 6.42 1/2" + 3/4" 82 84 

LA90Z 21.22 24.02 21.89 24.69 6.85 6.42 1/2" + 3/4" 82 84 

LA100Z 24.02 27.20 24.69 27.87 7.68 6.61 2x3/4" 101 104 

LA112Z 23.50 26.69 - - 8.62 7.13 2x3/4" 126 - 

LA132SP 24.84 28.86 - - 10.20 7.68 1"+3/4" 148 - 

LA132ZMP 26.65 30.67 - - 10.20 7.68 1"+3/4" 168 - 


3 - 156 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


200 130 12 165 3,5 29 11 

250 180 15 215 4 26 13,5 

300 230 15 265 4 26 13,5 

Output Shaft 


34,925 70 60,325 0,686 38,35 7,938 70 3/8“-16UNC 

Gearcase 


80 168 220 117 88 173 



Motor 



LA71 426.0 481.0 443.0 498.0 139.0 146.0 1/2" + 3/4" 27 28 

LA71Z 445.0 500.0 462.0 517.0 139.0 146.0 1/2" + 3/4" 27 28 

LA80 463.0 526.5 480.0 543.5 156.5 155.0 1/2" + 3/4" 32 33 

LA90S 494.0 565.0 511.0 582.0 174.0 163.0 1/2" + 3/4" 37 38 

LA90Z 539.0 610.0 556.0 627.0 174.0 163.0 1/2" + 3/4" 37 38 

LA100Z 610.0 691.0 627.0 708.0 195.0 168.0 2 x 3/4" 46 47 

LA112Z 597.0 678.0 - - 219.0 181.0 2 x 3/4" 57 - 

LA132SP 631.0 733.0 - - 259.0 195.0 1" + 3/4" 67 - 

LA132ZMP 677.0 779.0 - - 259.0 195.0 1" + 3/4" 76 - 


[mm] 

3 - 157





Flange 


6.26 4.33 4.92 5.12 0.55 M10x16 

Output Shaft 


1.375 2.76 2.375 0.027 1.51 0.3125 3.425 3/8-16UNC 

Gearcase 


3.15 6.61 8.66 4.61 3.46 6.81 

Motor 



LA71 16.77 18.94 17.44 19.61 5.47 5.75 1/2" + 3/4" 53 55 

LA71Z 17.52 19.69 18.19 20.35 5.47 5.75 1/2" + 3/4" 53 55 

LA80 18.23 20.73 18.90 21.40 6.16 6.10 1/2" + 3/4" 64 66 

LA90S 19.45 22.24 20.12 22.91 6.85 6.42 1/2" + 3/4" 73 75 

LA90Z 21.22 24.02 21.89 24.69 6.85 6.42 1/2" + 3/4" 73 75 

LA100Z 24.02 27.20 24.69 27.87 7.68 6.61 2x3/4" 93 95 

LA112Z 23.50 26.69 - - 8.62 7.13 2x3/4" 119 - 

LA132SP 24.84 28.86 - - 10.20 7.68 1"+3/4" 141 - 

LA132ZMP 26.65 30.67 - - 10.20 7.68 1"+3/4" 161 - 


3 - 158 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


159 110 125 130 14 M10x16 

Output Shaft 


34,925 70 60,325 0,686 38,35 7,938 87 3/8“-16UNC 

Gearcase 


80 168 220 117 88 173 



Motor 



LA71 426.0 481.0 443.0 498.0 139.0 146.0 1/2" + 3/4" 24 25 

LA71Z 445.0 500.0 462.0 517.0 139.0 146.0 1/2" + 3/4" 24 25 

LA80 463.0 526.5 480.0 543.5 156.5 155.0 1/2" + 3/4" 29 30 

LA90S 494.0 565.0 511.0 582.0 174.0 163.0 1/2" + 3/4" 33 34 

LA90Z 539.0 610.0 556.0 627.0 174.0 163.0 1/2" + 3/4" 33 34 

LA100Z 610.0 691.0 627.0 708.0 195.0 168.0 2 x 3/4" 42 43 

LA112Z 597.0 678.0 - - 219.0 181.0 2 x 3/4" 54 - 

LA132SP 631.0 733.0 - - 259.0 195.0 1" + 3/4" 64 - 

LA132ZMP 677.0 779.0 - - 259.0 195.0 1" + 3/4" 73 - 


[mm] 

3 - 159



Foot mounted 

D/Z 68 DZ 510 

Mounting 

E F G H J 

6.69 8.07 1.18 0.69 2.36 

Output Shaft 


1.625 3.15 2.75 0.065 1.79 0.375 4.53 5/8-11UNC 

Gearcase 

BD KL BW B A AC AD D BS P2 P3 Q 

7.48 3.62 6.3 9.65 9.25 8.11 10.35 5.51 0.16 4.29 5.87 8.23 

Motor 



LA71 17.95 20.12 18.68 20.85 5.47 5.75 1/2" + 3/4" 95 99 

LA71Z 18.70 20.87 19.43 21.59 5.47 5.75 1/2" + 3/4" 95 99 

LA80 19.41 21.91 20.14 22.64 6.16 6.10 1/2" + 3/4" 106 110 

LA90S 20.63 23.43 21.36 24.15 6.85 6.42 1/2" + 3/4" 115 121 

LA90Z 22.40 25.20 23.13 25.93 6.85 6.42 1/2" + 3/4" 115 121 

LA100Z 25.20 28.39 25.93 29.11 7.68 6.61 2x3/4" 135 141 

LA112Z 24.61 27.80 - - 8.62 7.13 2x3/4" 161 - 

LA132SP 25.87 29.88 - - 10.20 7.68 1"+3/4" 190 - 

LA132ZMP 27.68 31.69 - - 10.20 7.68 1"+3/4" 209 - 

LA160MP 29.90 34.57 - - 12.34 8.94 1" + 3/4" 262 - 

LA160ZLP 31.79 36.46 - - 12.34 8.94 1" + 3/4" 262 - 


3 - 160 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

170 205 30 17,5 60 

Output Shaft 


41,275 80 69,85 1,651 45,47 9,525 115 5/8“-11UNC 

Gearcase 


190 92 160 245 235 206 263 140 4 109 149 209 


D/Z 68 DZ 510 

Motor 



LA71 456.0 511.0 474.5 529.5 139.0 146.0 1/2" + 3/4" 43 45 

LA71Z 475.0 530.0 493.5 548.5 139.0 146.0 1/2" + 3/4" 43 45 

LA80 493.0 556.5 511.5 575.0 156.5 155.0 1/2" + 3/4" 48 50 

LA90S 524.0 595.0 542.5 613.5 174.0 163.0 1/2" + 3/4" 52 55 

LA90Z 569.0 640.0 587.5 658.5 174.0 163.0 1/2" + 3/4" 52 55 

LA100Z 640.0 721.0 658.5 739.5 195.0 168.0 2 x 3/4" 61 64 

LA112Z 625.0 706.0 - - 219.0 181.0 2 x 3/4" 73 - 

LA132SP 657.0 759.0 - - 259.0 195.0 1" + 3/4" 86 - 

LA132ZMP 703.0 805.0 - - 259.0 195.0 1" + 3/4" 95 - 

LA160MP 759.5 878.0 - - 313.5 227.0 1" + 3/4" 119 - 

LA160ZLP 807.5 926.0 - - 313.5 227.0 1" + 3/4" 119 - 


[mm] 

3 - 161





Flange 


9.84 7.09 0.59 8.46 0.16 1.69 0.53 

11.81 9.06 0.63 10.43 0.16 1.65 0.53 

13.78 9.84 0.71 11.81 0.16 1.57 0.69 

Output Shaft 


1.625 3.15 2.75 0.065 1.79 0.375 3.15 5/8-11UNC 

Gearcase 

KL AC AD SA P2 P3 Q 

3.6 8.11 10.35 5.67 4.29 5.87 8.23 

Motor 



LA71 17.95 20.12 18.68 20.85 5.47 5.75 1/2" + 3/4" 99 104 

LA71Z 18.70 20.87 19.43 21.59 5.47 5.75 1/2" + 3/4" 99 104 

LA80 19.41 21.91 20.14 22.64 6.16 6.10 1/2" + 3/4" 108 115 

LA90S 20.63 23.43 21.36 24.15 6.85 6.42 1/2" + 3/4" 119 123 

LA90Z 22.40 25.20 23.13 25.93 6.85 6.42 1/2" + 3/4" 119 123 

LA100Z 25.20 28.39 25.93 29.11 7.68 6.61 2x3/4" 139 143 

LA112Z 24.61 27.80 - - 8.62 7.13 2x3/4" 165 - 

LA132SP 25.87 29.88 - - 10.20 7.68 1"+3/4" 194 - 

LA132ZMP 27.68 31.69 - - 10.20 7.68 1"+3/4" 214 - 

LA160MP 29.90 34.57 - - 12.34 8.94 1" + 3/4" 267 - 

LA160ZLP 31.79 36.46 - - 12.34 8.94 1" + 3/4" 267 - 


3 - 162 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


250 180 15 215 4 43 13,5 

300 230 16 265 4 42 13,5 

350 250 18 300 4 42 17,5 

Output Shaft 


41,275 80 69,85 1,651 45,47 9,525 80 5/8“-11UNC 

Gearcase 


91,5 206 263 144 109 149 209 



Motor 



LA71 456.0 511.0 474.5 529.5 139.0 146.0 1/2" + 3/4" 45 47 

LA71Z 475.0 530.0 493.5 548.5 139.0 146.0 1/2" + 3/4" 45 47 

LA80 493.0 556.5 511.5 575.0 156.5 155.0 1/2" + 3/4" 49 52 

LA90S 524.0 595.0 542.5 613.5 174.0 163.0 1/2" + 3/4" 54 56 

LA90Z 569.0 640.0 587.5 658.5 174.0 163.0 1/2" + 3/4" 54 56 

LA100Z 640.0 721.0 658.5 739.5 195.0 168.0 2 x 3/4" 63 65 

LA112Z 625.0 706.0 - - 219.0 181.0 2 x 3/4" 75 - 

LA132SP 657.0 759.0 - - 259.0 195.0 1" + 3/4" 88 - 

LA132ZMP 703.0 805.0 - - 259.0 195.0 1" + 3/4" 97 - 

LA160MP 759.5 878.0 - - 313.5 227.0 1" + 3/4" 121 - 

LA160ZLP 807.5 926.0 - - 313.5 227.0 1" + 3/4" 121 - 


[mm] 

3 - 163





Flange 


7.48 5.12 6.3 6.5 0.55 M12x17 

Output Shaft 


1.625 3.15 2.75 0.065 1.79 0.375 3.86 5/8-11UNC 

Gearcase 


3.6 8.11 10.35 5.67 4.29 5.87 8.23 

Motor 



LA71 17.95 20.12 18.68 20.85 5.47 5.75 1/2" + 3/4" 86 90 

LA71Z 18.70 20.87 19.43 21.59 5.47 5.75 1/2" + 3/4" 86 90 

LA80 19.41 21.91 20.14 22.64 6.16 6.10 1/2" + 3/4" 97 101 

LA90S 20.63 23.43 21.36 24.15 6.85 6.42 1/2" + 3/4" 108 112 

LA90Z 22.40 25.20 23.13 25.93 6.85 6.42 1/2" + 3/4" 108 112 

LA100Z 25.20 28.39 25.93 29.11 7.68 6.61 2x3/4" 128 132 

LA112Z 24.61 27.80 - - 8.62 7.13 2x3/4" 152 - 

LA132SP 25.87 29.88 - - 10.20 7.68 1"+3/4" 181 - 

LA132ZMP 27.68 31.69 - - 10.20 7.68 1"+3/4" 203 - 

LA160MP 29.90 34.57 - - 12.34 8.94 1" + 3/4" 254 - 

LA160ZLP 31.79 36.46 - - 12.34 8.94 1" + 3/4" 254 - 


3 - 164 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


190 130 160 165 14 M12x17 

Output Shaft 


41,275 80 69,85 1,651 45,47 9,525 98 5/8“-11UNC 

Gearcase 


91,5 206 263 144 109 149 209 



Motor 



LA71 456.0 511.0 474.5 529.5 139.0 146.0 1/2" + 3/4" 39 41 

LA71Z 475.0 530.0 493.5 548.5 139.0 146.0 1/2" + 3/4" 39 41 

LA80 493.0 556.5 511.5 575.0 156.5 155.0 1/2" + 3/4" 44 46 

LA90S 524.0 595.0 542.5 613.5 174.0 163.0 1/2" + 3/4" 49 51 

LA90Z 569.0 640.0 587.5 658.5 174.0 163.0 1/2" + 3/4" 49 51 

LA100Z 640.0 721.0 658.5 739.5 195.0 168.0 2 x 3/4" 58 60 

LA112Z 625.0 706.0 - - 219.0 181.0 2 x 3/4" 69 - 

LA132SP 657.0 759.0 - - 259.0 195.0 1" + 3/4" 82 - 

LA132ZMP 703.0 805.0 - - 259.0 195.0 1" + 3/4" 92 - 

LA160MP 759.5 878.0 - - 313.5 227.0 1" + 3/4" 115 - 

LA160ZLP 807.5 926.0 - - 313.5 227.0 1" + 3/4" 115 - 


[mm] 

3 - 165



Foot mounted 

D/Z 88 DZ 510 

Mounting 

E F G H J 

8.46 10.24 1.77 0.69 2.95 

Output Shaft 


2.125 3.94 3.5 0.004 2.35 0.5 5.51 3/4-10UNC 

Gearcase 

BD KL BW B A AC AD D BS DB P P2 P3 Q 

9.65 5.08 7.87 12.2 11.42 10.24 13.07 7.09 0.16 0 5.12 5.28 7.13 10.47 

Motor 



LA71 - - 20.59 22.76 5.47 5.75 1/2" + 3/4" - 168 

LA71Z - - 21.34 23.50 5.47 5.75 1/2" + 3/4" - 168 

LA80 - - 22.05 24.55 6.16 6.10 1/2" + 3/4" - 179 

LA90S 22.28 25.08 23.27 26.06 6.85 6.42 1/2" + 3/4" 187 190 

LA90Z 24.06 26.85 25.04 27.83 6.85 6.42 1/2" + 3/4" 187 190 

LA100Z 26.75 29.94 27.83 31.02 7.68 6.61 2 x 3/4" 205 209 

LA112Z 26.12 29.31 27.26 30.45 8.62 7.13 2 x 3/4" 234 236 

LA132SP 28.48 32.50 28.48 32.50 10.20 7.68 1" + 3/4" 258 265 

LA132ZMP 29.19 33.21 30.30 34.31 10.20 7.68 1" + 3/4" 278 284 

LA160MP 31.50 36.16 - - 12.34 8.94 1" + 3/4" 335 - 

LA160ZLP 33.39 38.05 - - 12.34 8.94 1" + 3/4" 335 - 

LG180ZMB 35.85 40.65 - - 12.34 8.94 1 1/4" + 3/4" 604 - 

LG180ZLB 35.85 40.65 - - 13.70 12.70 1 1/4" + 3/4" 604 - 


3 - 166 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

215 260 45 17,5 75 

Output Shaft 


83,975 100 88,9 0,102 59,69 12,7 140 3/4“-10UNC 

Gearcase 


245 129 200 310 290 260 332 180 4 134 181 266 


D/Z 88 DZ 510 

Motor 



LA71 - - 523.0 578.0 139.0 146.0 1/2" + 3/4" - 76 

LA71Z - - 542.0 597.0 139.0 146.0 1/2" + 3/4" - 76 

LA80 - - 560.0 623.5 156.5 155.0 1/2" + 3/4" - 81 

LA90S 566.0 637.0 591.0 662.0 174.0 163.0 1/2" + 3/4" 85 86 

LA90Z 611.0 682.0 636.0 707.0 174.0 163.0 1/2" + 3/4" 85 86 

LA100Z 679.5 760.5 707.0 788.0 195.0 168.0 2 x 3/4" 93 95 

LA112Z 663.5 744.5 692.5 773.5 219.0 181.0 2 x 3/4" 106 107 

LA132SP 723.5 825.5 723.5 825.5 259.0 195.0 1" + 3/4" 117 120 

LA132ZMP 741.5 843.5 769.5 871.5 259.0 195.0 1" + 3/4" 126 129 

LA160MP 800.0 918.5 - - 313.5 227.0 1" + 3/4" 152 - 

LA160ZLP 848.0 966.5 - - 313.5 227.0 1" + 3/4" 152 - 

LG180ZMB 910.5 1032.5 - - 348.0 322.5 1 1/4" + 3/4" 274 - 

LG180ZLB 910.5 1032.5 - - 348.0 322.5 1 1/4" + 3/4" 274 - 


[mm] 

3 - 167





BD ≥ 17.72" 

Flange 


11.81 9.06 0.63 10.43 0.16 2.13 0.53 

13.78 9.84 0.71 11.81 0.2 2.05 0.69 

17.72 13.78 0.71 15.75 0.2 2.05 0.69 

Output Shaft 


2.125 3.94 3.5 0.004 2.35 0.5 3.94 3/4-10UNC 

Gearcase 


5.08 10.24 13.07 7.17 5.28 7.13 10.47 

Motor 



LA71 - - 20.59 22.76 5.47 5.75 1/2" + 3/4" - 172 

LA71Z - - 21.34 23.50 5.47 5.75 1/2" + 3/4" - 172 

LA80 - - 22.05 24.55 6.16 6.10 1/2" + 3/4" - 183 

LA90S 22.28 25.08 23.27 26.06 6.85 6.42 1/2" + 3/4" 192 194 

LA90Z 24.06 26.85 25.04 27.83 6.85 6.42 1/2" + 3/4" 192 194 

LA100Z 26.75 29.94 27.83 31.02 7.68 6.61 2 x 3/4" 209 214 

LA112Z 26.12 29.31 27.26 30.45 8.62 7.13 2 x 3/4" 238 240 

LA132SP 28.48 32.50 28.48 32.50 10.20 7.68 1" + 3/4" 262 269 

LA132ZMP 29.19 33.21 30.30 34.31 10.20 7.68 1" + 3/4" 282 289 

LA160MP 31.50 36.16 - - 12.34 8.94 1" + 3/4" 340 - 

LA160ZLP 33.39 38.05 - - 12.34 8.94 1" + 3/4" 340 - 

LG180ZMB 35.85 40.65 - - 12.34 8.94 1 1/4" + 3/4" 609 - 

LG180ZLB 35.85 40.65 - - 13.70 12.70 1 1/4" + 3/4" 609 - 


3 - 168 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


300 230 16 265 4 54 13,5 

350 250 18 300 5 52 17,5 

450 350 18 400 5 52 17,5 

Output Shaft 


83,975 100 88,9 0,102 59,69 12,7 100 3/4“-10UNC 

Gearcase 


129 260 332 182 134 181 266 



BD ≥ 450 mm 

Motor 



LA71 - - 523.0 578.0 139.0 146.0 1/2" + 3/4" - 78 

LA71Z - - 542.0 597.0 139.0 146.0 1/2" + 3/4" - 78 

LA80 - - 560.0 623.5 156.5 155.0 1/2" + 3/4" - 83 

LA90S 566.0 637.0 591.0 662.0 174.0 163.0 1/2" + 3/4" 87 88 

LA90Z 611.0 682.0 636.0 707.0 174.0 163.0 1/2" + 3/4" 87 88 

LA100Z 679.5 760.5 707.0 788.0 195.0 168.0 2 x 3/4" 95 97 

LA112Z 663.5 744.5 692.5 773.5 219.0 181.0 2 x 3/4" 108 109 

LA132SP 723.5 825.5 723.5 825.5 259.0 195.0 1" + 3/4" 119 122 

LA132ZMP 741.5 843.5 769.5 871.5 259.0 195.0 1" + 3/4" 128 131 

LA160MP 800.0 918.5 - - 313.5 227.0 1" + 3/4" 154 - 

LA160ZLP 848.0 966.5 - - 313.5 227.0 1" + 3/4" 154 - 

LG180ZMB 910.5 1032.5 - - 348.0 322.5 1 1/4" + 3/4" 276 - 

LG180ZLB 910.5 1032.5 - - 348.0 322.5 1 1/4" + 3/4" 276 - 


[mm] 

3 - 169





Flange 


9.65 7.09 7.87 8.46 0.71 M16x22 

Output Shaft 


2.125 3.94 3.5 0.004 2.35 0.5 4.8 3/4-10UNC 

Gearcase 


5.08 10.24 13.07 7.17 5.28 7.13 10.47 

Motor 



LA71 - - 20.59 22.76 5.47 5.75 1/2" + 3/4" - 152 

LA71Z - - 21.34 23.50 5.47 5.75 1/2" + 3/4" - 152 

LA80 - - 22.05 24.55 6.16 6.10 1/2" + 3/4" - 163 

LA90S 22.28 25.08 23.27 26.06 6.85 6.42 1/2" + 3/4" 174 174 

LA90Z 24.06 26.85 25.04 27.83 6.85 6.42 1/2" + 3/4" 174 174 

LA100Z 26.75 29.94 27.83 31.02 7.68 6.61 2 x 3/4" 192 194 

LA112Z 26.12 29.31 27.26 30.45 8.62 7.13 2 x 3/4" 218 223 

LA132SP 28.48 32.50 28.48 32.50 10.20 7.68 1" + 3/4" 243 249 

LA132ZMP 29.19 33.21 30.30 34.31 10.20 7.68 1" + 3/4" 265 269 

LA160MP 31.50 36.16 - - 12.34 8.94 1" + 3/4" 320 - 

LA160ZLP 33.39 38.05 - - 12.34 8.94 1" + 3/4" 320 - 

LG180ZMB 35.85 40.65 - - 12.34 8.94 1 1/4" + 3/4" 589 - 

LG180ZLB 35.85 40.65 - - 13.70 12.70 1 1/4" + 3/4" 589 - 


3 - 170 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


245 180 200 215 18 M16x22 

Output Shaft 


53,975 100 88,9 0,102 59,69 12,7 122 3/4“-10UNC 

Gearcase 


129 260 332 182 134 181 266 



Motor 



LA71 - - 523.0 578.0 139.0 146.0 1/2" + 3/4" - 69 

LA71Z - - 542.0 597.0 139.0 146.0 1/2" + 3/4" - 69 

LA80 - - 560.0 623.5 156.5 155.0 1/2" + 3/4" - 74 

LA90S 566.0 637.0 591.0 662.0 174.0 163.0 1/2" + 3/4" 79 79 

LA90Z 611.0 682.0 636.0 707.0 174.0 163.0 1/2" + 3/4" 79 79 

LA100Z 679.5 760.5 707.0 788.0 195.0 168.0 2 x 3/4" 87 88 

LA112Z 663.5 744.5 692.5 773.5 219.0 181.0 2 x 3/4" 99 101 

LA132SP 723.5 825.5 723.5 825.5 259.0 195.0 1" + 3/4" 110 113 

LA132ZMP 741.5 843.5 769.5 871.5 259.0 195.0 1" + 3/4" 120 122 

LA160MP 800.0 918.5 - - 313.5 227.0 1" + 3/4" 145 - 

LA160ZLP 848.0 966.5 - - 313.5 227.0 1" + 3/4" 145 - 

LG180ZMB 910.5 1032.5 - - 348.0 322.5 1 1/4" + 3/4" 267 - 

LG180ZLB 910.5 1032.5 - - 348.0 322.5 1 1/4" + 3/4" 267 - 


[mm] 

3 - 171



Foot mounted 

D/Z 108 DZ 510 

Mounting 

E F G H J 

9.84 12.2 1.97 0.87 3.54 

Output Shaft 


2.375 4.72 4.25 0.002 2.65 0.625 6.28 3/4-10UNC 

Gearcase 

BD KL BW B A AC AD D BS P1 P2 P3 Q 

11.81 4.94 9.84 14.37 13.39 12.05 16.14 8.86 0.2 6.18 6.54 8.58 12.24 

Motor 



LA80 - - 23.58 26.08 6.16 6.10 1/2" + 3/4" - 287 

LA90S 23.60 26.40 24.80 27.60 6.85 6.42 1/2" + 3/4" 293 298 

LA90Z 25.37 28.17 26.57 29.37 6.85 6.42 1/2" + 3/4" 293 298 

LA100Z 28.05 31.24 29.37 32.56 7.68 6.61 2 x 3/4" 311 318 

LA112Z 27.44 30.63 28.68 31.87 8.62 7.13 2 x 3/4" 335 344 

LA132SP 28.66 32.68 29.94 33.96 10.20 7.68 1" + 3/4" 359 370 

LA132ZMP 30.47 34.49 31.75 35.77 10.20 7.68 1" + 3/4" 379 390 

LA160MP 32.80 37.48 - - 12.34 8.94 1" + 3/4" 437 452 

LA160ZLP 34.70 39.37 - - 12.34 8.94 1" + 3/4" 437 452 

LG180ZMB 37.05 41.85 - - 12.34 8.94 1 1/4" + 3/4" 714 - 

LG180ZLB 37.05 41.85 - - 13.70 12.70 1 1/4" + 3/4" 714 - 

LG200LB 37.24 42.20 - - 13.70 12.70 1 1/4" + 3/4" 825 - 

K4-LG225S 47.50 56.91 - - 15.16 11.85 2 x 1 1/2" 1169 - 

K4-LG225ZM 49.86 59.27 - - 17.40 12.80 2 x 1 1/2" 1270 - 


3 - 172 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

250 310 50 22 90 

Output Shaft 


60,325 120 107,95 0,051 67,31 15,875 159,5 3/4“-10UNC 


D/Z 108 DZ 510 

Gearcase 


300 125,5 250 365 340 306 410 225 5 157 166 218 311 

Motor 



LA80 - - 599.0 662.5 156.5 155.0 1/2" + 3/4" - 130 

LA90S 599.5 670.5 630.0 701.0 174.0 163.0 1/2" + 3/4" 133 135 

LA90Z 644.5 715.5 675.0 746.0 174.0 163.0 1/2" + 3/4" 133 135 

LA100Z 712.5 793.5 746.0 827.0 195.0 168.0 2 x 3/4" 141 144 

LA112Z 697.0 778.0 728.5 809.5 219.0 181.0 2 x 3/4" 152 156 

LA132SP 728.0 830.0 760.5 862.5 259.0 195.0 1" + 3/4" 163 168 

LA132ZMP 774.0 876.0 806.5 908.5 259.0 195.0 1" + 3/4" 172 177 

LA160MP 833.0 952.0 863.0 981.5 313.5 227.0 1" + 3/4" 198 205 

LA160ZLP 881.5 1000.0 911.0 1029.5 313.5 227.0 1" + 3/4" 198 205 

LG180ZMB 941.0 1063.0 - - 348.0 322.5 1 1/4" + 3/4" 324 - 

LG180ZLB 941.0 1063.0 - - 348.0 322.5 1 1/4" + 3/4" 324 - 

LG200LB 946.0 1072.0 - - 385.0 301.0 1 1/4" + 3/4" 374 - 

K4-LG225S 1206.5 1445.5 - - 442.0 325.0 2 x 1 1/2" 530 - 

K4-LG225ZM 1266.5 1505.5 - - 442.0 325.0 2 x 1 1/2" 576 - 


[mm] 

3 - 173




DF/ZF 108 DZF 510 

BD ≥ 17.72" 

Flange 


13.78 9.84 0.71 11.81 0.2 1.61 0.69 

17.72 13.78 0.79 15.75 0.2 1.54 0.69 

Output Shaft 


2.375 4.72 4.25 0.002 2.65 0.625 4.72 3/4-10UNC 

Gearcase 

KL AC AD SA P1 P2 P3 Q 

4.98 12.83 16.14 8.7 6.63 6.97 8.98 12.24 

Motor 



LA80 - - 23.58 26.08 6.16 6.10 1/2" + 3/4" - 284 

LA90S 23.60 26.40 24.80 27.60 6.85 6.42 1/2" + 3/4" 289 295 

LA90Z 25.37 28.17 26.57 29.37 6.85 6.42 1/2" + 3/4" 289 295 

LA100Z 28.05 31.24 29.37 32.56 7.68 6.61 2 x 3/4" 306 315 

LA112Z 27.44 30.63 28.68 31.87 8.62 7.13 2 x 3/4" 333 342 

LA132SP 28.66 32.68 29.94 33.96 10.20 7.68 1" + 3/4" 357 368 

LA132ZMP 30.47 34.49 31.75 35.77 10.20 7.68 1" + 3/4" 377 388 

LA160MP 32.80 37.48 - - 12.34 8.94 1" + 3/4" 432 450 

LA160ZLP 34.70 39.37 - - 12.34 8.94 1" + 3/4" 432 450 

LG180ZMB 37.05 41.85 - - 12.34 8.94 1 1/4" + 3/4" 712 - 

LG180ZLB 37.05 41.85 - - 13.70 12.70 1 1/4" + 3/4" 712 - 

LG200LB 37.24 42.20 - - 13.70 12.70 1 1/4" + 3/4" 822 - 

K4-LG225S 47.50 56.91 - - 15.16 11.85 2 x 1 1/2" 1166 - 

K4-LG225ZM 49.86 59.27 - - 17.40 12.80 2 x 1 1/2" 1268 - 


3 - 174 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


350 250 18 300 5 41 17,5 

450 350 20 400 5 39 17,5 

Output Shaft 


60,325 120 107,95 0,051 67,31 15,875 120 3/4-10UNC 

Gearcase 


126,5 326 410 221 168,5 177 228 311 


DF/ZF 108 DZF 510 

BD ≥ 450 mm 

Motor 



LA80 - - 599.0 662.5 156.5 155.0 1/2" + 3/4" - 129 

LA90S 599.5 670.5 630.0 701.0 174.0 163.0 1/2" + 3/4" 131 134 

LA90Z 644.5 715.5 675.0 746.0 174.0 163.0 1/2" + 3/4" 131 134 

LA100Z 712.5 793.5 746.0 827.0 195.0 168.0 2 x 3/4" 139 143 

LA112Z 697.0 778.0 728.5 809.5 219.0 181.0 2 x 3/4" 151 155 

LA132SP 728.0 830.0 760.5 862.5 259.0 195.0 1" + 3/4" 162 167 

LA132ZMP 774.0 876.0 806.5 908.5 259.0 195.0 1" + 3/4" 171 176 

LA160MP 833.0 952.0 863.0 981.5 313.5 227.0 1" + 3/4" 196 204 

LA160ZLP 881.5 1000.0 911.0 1029.5 313.5 227.0 1" + 3/4" 196 204 

LG180ZMB 941.0 1063.0 348.0 322.5 1 1/4" + 3/4" 323 - 

LG180ZLB 941.0 1063.0 348.0 322.5 1 1/4" + 3/4" 323 - 

LG200LB 946.0 1072.0 385.0 301.0 1 1/4" + 3/4" 373 - 

K4-LG225S 1206.5 1445.5 442.0 325.0 2 x 1 1/2" 529 - 

K4-LG225ZM 1266.5 1505.5 442.0 325.0 2 x 1 1/2" 575 - 


[mm] 

3 - 175




DZ/ZZ 108 DZZ 510 

Flange 


11.81 7.87 9.84 9.84 0.91 M16x28 

Output Shaft 


2.375 4.72 4.25 0.002 2.65 0.625 5.827 3/4-10UNC 

Gearcase 


4.98 12.83 16.14 8.7 6.63 6.97 8.98 12.24 

Motor 



LA80 - - 23.58 26.08 6.16 6.10 1/2" + 3/4" - 267 

LA90S 23.60 26.40 24.80 27.60 6.85 6.42 1/2" + 3/4" 273 278 

LA90Z 25.37 28.17 26.57 29.37 6.85 6.42 1/2" + 3/4" 273 278 

LA100Z 28.05 31.24 29.37 32.56 7.68 6.61 2 x 3/4" 291 298 

LA112Z 27.44 30.63 28.68 31.87 8.62 7.13 2 x 3/4" 318 324 

LA132SP 28.66 32.68 29.94 33.96 10.20 7.68 1" + 3/4" 340 351 

LA132ZMP 30.47 34.49 31.75 35.77 10.20 7.68 1" + 3/4" 359 370 

LA160MP 32.80 37.48 - - 12.34 8.94 1" + 3/4" 417 432 

LA160ZLP 34.70 39.37 - - 12.34 8.94 1" + 3/4" 417 432 

LG180ZMB 37.05 41.85 - - 12.34 8.94 1 1/4" + 3/4" 695 - 

LG180ZLB 37.05 41.85 - - 13.70 12.70 1 1/4" + 3/4" 695 - 

LG200LB 37.24 42.20 - - 13.70 12.70 1 1/4" + 3/4" 805 - 

K4-LG225S 47.50 56.91 - - 15.16 11.85 2 x 1 1/2" 1149 - 

K4-LG225ZM 49.86 59.27 - - 17.40 12.80 2 x 1 1/2" 1250 - 


3 - 176 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


300 200 250 250 23 M16x28 

Output Shaft 


60,325 120 107,95 0,051 67,31 15,875 148 3/4“-10UNC 

Gearcase 


126,5 326 410 221 168,5 177 228 311 


DZ/ZZ 108 DZZ 510 

Motor 



LA80 - - 599.0 662.5 156.5 155.0 1/2" + 3/4" - 121 

LA90S 599.5 670.5 630.0 701.0 174.0 163.0 1/2" + 3/4" 124 126 

LA90Z 644.5 715.5 675.0 746.0 174.0 163.0 1/2" + 3/4" 124 126 

LA100Z 712.5 793.5 746.0 827.0 195.0 168.0 2 x 3/4" 132 135 

LA112Z 697.0 778.0 728.5 809.5 219.0 181.0 2 x 3/4" 144 147 

LA132SP 728.0 830.0 760.5 862.5 259.0 195.0 1" + 3/4" 154 159 

LA132ZMP 774.0 876.0 806.5 908.5 259.0 195.0 1" + 3/4" 163 168 

LA160MP 833.0 952.0 863.0 981.5 313.5 227.0 1" + 3/4" 189 196 

LA160ZLP 881.5 1000.0 911.0 1029.5 313.5 227.0 1" + 3/4" 189 196 

LG180ZMB 941.0 1063.0 348.0 322.5 1 1/4" + 3/4" 315 - 

LG180ZLB 941.0 1063.0 348.0 322.5 1 1/4" + 3/4" 315 - 

LG200LB 946.0 1072.0 385.0 301.0 1 1/4" + 3/4" 365 - 

K4-LG225S 1206.5 1445.5 442.0 325.0 2 x 1 1/2" 521 - 

K4-LG225ZM 1266.5 1505.5 442.0 325.0 2 x 1 1/2" 567 - 


[mm] 

3 - 177



Foot mounted 

D/Z 128 DZ 510 

Mounting 

E F G H J 

11.42 14.57 2.17 1.02 4.33 

Output Shaft 


2.875 5.51 4.875 0.046 3.2 0.75 7.28 3/4-10UNC 

Gearcase 


13.39 5.63 11.81 17.32 15.75 14.17 18.19 9.84 0.2 7.2 7.24 10.06 14.72 

Motor 



LA90S - - 27.01 29.80 6.85 6.42 1/2" + 3/4" - 467 

LA90Z - - 28.78 31.57 6.85 6.42 1/2" + 3/4" - 467 

LA100Z 30.16 33.35 31.57 34.76 7.68 6.61 2 x 3/4" 472 487 

LA112Z 29.51 32.70 30.85 34.04 8.62 7.13 2 x 3/4" 498 514 

LA132SP 30.73 34.74 32.07 36.08 10.20 7.68 1" + 3/4" 518 542 

LA132ZMP 32.54 36.56 33.88 37.89 10.20 7.68 1" + 3/4" 538 562 

LA160MP 34.65 39.31 36.10 40.77 12.34 8.94 1" + 3/4" 604 622 

LA160ZLP 36.54 41.20 37.99 42.66 12.34 8.94 1" + 3/4" 604 622 

LG180ZMB 39.00 43.80 40.45 45.26 13.70 12.70 1 1/4" + 3/4" 871 900 

LG180ZLB 39.00 43.80 40.45 45.26 13.70 12.70 1 1/4" + 3/4" 871 900 

LG200LB 39.19 44.15 40.65 45.61 15.16 11.85 1 1/4" + 3/4" 981 1010 

LG225S 41.99 51.40 - - 17.40 12.80 2 x 1 1/2" 1151 - 

LG225ZM 44.35 53.76 - - 17.40 12.80 2 x 1 1/2" 1252 - 

LG250ZM 46.32 55.73 - - 17.40 12.80 2 x 1 1/2" 1519 - 

K4-LGI280S 56.04 64.90 - - 19.49 15.43 2 x 2 1/2" 1746 - 


3 - 178 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

290 370 55 26 110 

Output Shaft 


73,025 140 123,825 1,168 81,28 19,05 185 3/4-10UNC 


D/Z 128 DZ 510 

Gearcase 


340 143 300 440 400 360 462 250 5 183 184 255,5 374 

Motor 



LA90S - - 686.0 757.0 174.0 163.0 1/2" + 3/4" - 212 

LA90Z - - 731.0 802.0 174.0 163.0 1/2" + 3/4" - 212 

LA100Z 766.0 847.0 802.0 883.0 195.0 168.0 2 x 3/4" 214 221 

LA112Z 749.5 830.5 783.5 864.5 219.0 181.0 2 x 3/4" 226 233 

LA132SP 780.5 882.5 814.5 916.5 259.0 195.0 1" + 3/4" 235 246 

LA132ZMP 826.5 928.5 860.5 962.5 259.0 195.0 1" + 3/4" 244 255 

LA160MP 880.0 998.5 917.0 1035.5 313.5 227.0 1" + 3/4" 274 282 

LA160ZLP 928.0 1046.5 965.0 1083.5 313.5 227.0 1" + 3/4" 274 282 

LG180ZMB 990.5 1112.5 1027.5 1149.5 348.0 322.5 1 1/4" + 3/4" 395 408 

LG180ZLB 990.5 1112.5 1027.5 1149.5 348.0 322.5 1 1/4" + 3/4" 395 408 

LG200LB 995.5 1121.5 1032.5 1158.5 385.0 301.0 1 1/4" + 3/4" 445 458 

LG225S 1066.5 1305.5 - - 442.0 325.0 2 x 1 1/2" 522 - 

LG225ZM 1126.5 1365.5 - - 442.0 325.0 2 x 1 1/2" 568 - 

LG250ZM 1176.5 1415.5 - - 442.0 325.0 2 x 1 1/2" 689 - 

K4-LGI280S 1423.5 1648.5 - - 495.0 392.0 2 x 2 1/2" 792 - 


[mm] 

3 - 179




DF/ZF 128 DZF 510 

BD ≥ 17.72" 

BD ≥ 450 mm 

Flange 


13.78 1) 9.84 0.71 11.81 0.2 2.36 0.69 1)with torque > 3500Nm flange has to be aligned. 

17.72 13.78 0.87 15.75 0.2 2.2 0.69 2 dowelpin of ∅12mm are recommended. 

21.65 17.72 0.87 19.69 0.2 2.2 0.69 

Output Shaft 


2.875 5.51 4.875 0.046 3.2 0.75 5.51 3/4-10UNC 

Gearcase 

KL AC AD SA P P2 P3 Q 

5.75 14.33 18.19 9.84 7.6 7.64 10.35 14.72 

Motor 



LA90S - - 27.01 29.80 6.85 6.42 1/2" + 3/4" - 454 

LA90Z - - 28.78 31.57 6.85 6.42 1/2" + 3/4" - 454 

LA100Z 30.16 33.35 31.57 34.76 7.68 6.61 2 x 3/4" 461 476 

LA112Z 29.51 32.70 30.85 34.04 8.62 7.13 2 x 3/4" 485 501 

LA132SP 30.73 34.74 32.07 36.08 10.20 7.68 1" + 3/4" 507 529 

LA132ZMP 32.54 36.56 33.88 37.89 10.20 7.68 1" + 3/4" 527 549 

LA160MP 34.65 39.31 36.10 40.77 12.34 8.94 1" + 3/4" 593 609 

LA160ZLP 36.54 41.20 37.99 42.66 12.34 8.94 1" + 3/4" 593 609 

LG180ZMB 39.00 43.80 40.45 45.26 13.70 12.70 1 1/4" + 3/4" 860 886 

LG180ZLB 39.00 43.80 40.45 45.26 13.70 12.70 1 1/4" + 3/4" 860 886 

LG200LB 39.19 44.15 40.65 45.61 15.16 11.85 1 1/4" + 3/4" 970 997 

LG225S 41.99 51.40 - - 17.40 12.80 2 x 1 1/2" 1140 - 

LG225ZM 44.35 53.76 - - 17.40 12.80 2 x 1 1/2" 1241 - 

LG250ZM 46.32 55.73 - - 17.40 12.80 2 x 1 1/2" 1508 - 

K4-LGI280S 56.04 64.90 - - 19.49 15.43 2 x 2 1/2" 1735 - 


3 - 180 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




DF/ZF 128 DZF 510 

BD ≥ 17.72" 

BD ≥ 450 mm 

Flange 


350 1) 250 18 300 5 60 17,5 1)with torque > 3500Nm flange has to be aligned. 

450 350 22 400 5 56 17,5 2 dowelpin of ∅12mm are recommended. 

550 450 22 500 5 56 17,5 

Output Shaft 


70,025 140 123,825 1,168 81,28 19,05 140 3/4“-10UNC 

Gearcase 


146 364 462 250 193 194 263 374 

Motor 



LA90S - - 686.0 757.0 174.0 163.0 1/2" + 3/4" - 206 

LA90Z - - 731.0 802.0 174.0 163.0 1/2" + 3/4" - 206 

LA100Z 766.0 847.0 802.0 883.0 195.0 168.0 2 x 3/4" 209 216 

LA112Z 749.5 830.5 783.5 864.5 219.0 181.0 2 x 3/4" 220 227 

LA132SP 780.5 882.5 814.5 916.5 259.0 195.0 1" + 3/4" 230 240 

LA132ZMP 826.5 928.5 860.5 962.5 259.0 195.0 1" + 3/4" 239 249 

LA160MP 880.0 998.5 917.0 1035.5 313.5 227.0 1" + 3/4" 269 276 

LA160ZLP 928.0 1046.5 965.0 1083.5 313.5 227.0 1" + 3/4" 269 276 

LG180ZMB 990.5 1112.5 1027.5 1149.5 348.0 322.5 1 1/4" + 3/4" 390 402 

LG180ZLB 990.5 1112.5 1027.5 1149.5 348.0 322.5 1 1/4" + 3/4" 390 402 

LG200LB 995.5 1121.5 1032.5 1158.5 385.0 301.0 1 1/4" + 3/4" 440 452 

LG225S 1066.5 1305.5 - - 442.0 325.0 2 x 1 1/2" 517 - 

LG225ZM 1126.5 1365.5 - - 442.0 325.0 2 x 1 1/2" 563 - 

LG250ZM 1176.5 1415.5 - - 442.0 325.0 2 x 1 1/2" 684 - 

K4-LGI280S 1423.5 1648.5 - - 495.0 392.0 2 x 2 1/2" 787 - 


[mm] 

3 - 181




DZ/ZZ 128 DZZ 510 

Flange 


13.39 9.45 11.81 11.81 1.06 M16x22 

Output Shaft 


2.875 5.51 4.875 0.046 3.2 0.75 6.81 3/4-10UNC 

Gearcase 


5.75 14.33 18.19 9.84 7.6 7.64 10.35 14.72 

Motor 



LA90S - - 27.01 29.80 6.85 6.42 1/2" + 3/4" - 419 

LA90Z - - 28.78 31.57 6.85 6.42 1/2" + 3/4" - 419 

LA100Z 30.16 33.35 31.57 34.76 7.68 6.61 2 x 3/4" 423 439 

LA112Z 29.51 32.70 30.85 34.04 8.62 7.13 2 x 3/4" 448 463 

LA132SP 30.73 34.74 32.07 36.08 10.20 7.68 1" + 3/4" 470 492 

LA132ZMP 32.54 36.56 33.88 37.89 10.20 7.68 1" + 3/4" 490 514 

LA160MP 34.65 39.31 36.10 40.77 12.34 8.94 1" + 3/4" 556 571 

LA160ZLP 36.54 41.20 37.99 42.66 12.34 8.94 1" + 3/4" 556 571 

LG180ZMB 39.00 43.80 40.45 45.26 13.70 12.70 1 1/4" + 3/4" 822 849 

LG180ZLB 39.00 43.80 40.45 45.26 13.70 12.70 1 1/4" + 3/4" 822 849 

LG200LB 39.19 44.15 40.65 45.61 15.16 11.85 1 1/4" + 3/4" 933 959 

LG225S 41.99 51.40 - - 17.40 12.80 2 x 1 1/2" 1103 - 

LG225ZM 44.35 53.76 - - 17.40 12.80 2 x 1 1/2" 1204 - 

LG250ZM 46.32 55.73 - - 17.40 12.80 2 x 1 1/2" 1471 - 

K4-LGI280S 56.04 64.90 - - 19.49 15.43 2 x 2 1/2" 1698 - 


3 - 182 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


340 240 300 300 27 M16x22 

Output Shaft 


73,025 140 123,825 1,168 81,28 19,05 173 3/4“-10UNC 

Gearcase 


146 364 462 250 193 194 263 374 


DZ/ZZ 128 DZZ 510 

Motor 



LA90S - - 686.0 757.0 174.0 163.0 1/2" + 3/4" - 190 

LA90Z - - 731.0 802.0 174.0 163.0 1/2" + 3/4" - 190 

LA100Z 766.0 847.0 802.0 883.0 195.0 168.0 2 x 3/4" 192 199 

LA112Z 749.5 830.5 783.5 864.5 219.0 181.0 2 x 3/4" 203 210 

LA132SP 780.5 882.5 814.5 916.5 259.0 195.0 1" + 3/4" 213 223 

LA132ZMP 826.5 928.5 860.5 962.5 259.0 195.0 1" + 3/4" 222 233 

LA160MP 880.0 998.5 917.0 1035.5 313.5 227.0 1" + 3/4" 252 259 

LA160ZLP 928.0 1046.5 965.0 1083.5 313.5 227.0 1" + 3/4" 252 259 

LG180ZMB 990.5 1112.5 1027.5 1149.5 348.0 322.5 1 1/4" + 3/4" 373 385 

LG180ZLB 990.5 1112.5 1027.5 1149.5 348.0 322.5 1 1/4" + 3/4" 373 385 

LG200LB 995.5 1121.5 1032.5 1158.5 385.0 301.0 1 1/4" + 3/4" 423 435 

LG225S 1066.5 1305.5 - - 442.0 325.0 2 x 1 1/2" 500 - 

LG225ZM 1126.5 1365.5 - - 442.0 325.0 2 x 1 1/2" 546 - 

LG250ZM 1176.5 1415.5 - - 442.0 325.0 2 x 1 1/2" 667 - 

K4-LGI280S 1423.5 1648.5 - - 495.0 392.0 2 x 2 1/2" 770 - 


[mm] 

3 - 183



Foot mounted 

D/Z 148 DZ 510 

Mounting 

E F G H J 

13.39 16.14 2.36 1.3 4.33 

Output Shaft 


3.625 6.69 5.5 0.602 4.01 0.875 8.66 1-8UNC 

Gearcase 

BD KL BW B A AC AD D BS DB J P1 P2 P3 Q 

13.39 6.3 11.81 19.29 17.72 16.38 20.08 12.4 0.24 1.46 4.33 6.77 7.2 10.35 16.18 

Motor 



LA100Z - - 32.83 36.02 7.68 6.61 2 x 3/4" - 690 

LA112Z - - 32.19 35.37 8.62 7.13 2 x 3/4" - 714 

LA132SP 31.87 35.89 33.37 37.38 10.20 7.68 1" + 3/4" 717 741 

LA132ZMP 33.68 37.70 35.18 39.19 10.20 7.68 1" + 3/4" 736 761 

LA160MP 35.81 40.47 37.30 41.97 12.34 8.94 1" + 3/4" 792 818 

LA160ZLP 37.70 42.36 39.19 43.86 12.34 8.94 1" + 3/4" 792 818 

LG180ZMB 40.16 44.96 41.65 46.46 13.70 12.70 1 1/4" + 3/4" 1069 1096 

LG180ZLB 40.16 44.96 41.65 46.46 13.70 12.70 1 1/4" + 3/4" 1069 1096 

LG200LB 40.35 45.31 41.85 46.81 15.16 11.85 1 1/4" + 3/4" 1180 1206 

LG225S 43.15 52.56 44.65 54.06 17.40 12.80 2 x 1 1/2" 1341 - 

LG225ZM 45.51 54.92 47.01 56.42 17.40 12.80 2 x 1 1/2" 1464 - 

LG250ZM 47.48 56.89 - - 17.40 12.80 2 x 1 1/2" 1766 - 

K4-LGI280ZM 62.15 71.08 - - 21.85 17.01 2 x 2 1/2" 2269 - 


3 - 184 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

340 410 60 33 110 

Output Shaft 


92,075 170 139,7 15,291 101,85 22,225 220 1“-8UNC 


D/Z 148 DZ 510 

Gearcase 

BD KL BW B A AC AD D BS DB P1 P2 P3 Q 

340 160 300 490 450 416 510 315 6 37 172 183 263 411 

Motor 



LA100Z - - 834.0 915.0 195.0 168.0 2 x 3/4" - 313 

LA112Z - - 817.5 898.5 219.0 181.0 2 x 3/4" - 324 

LA132SP 809.5 911.5 847.5 949.5 259.0 195.0 1" + 3/4" 325 336 

LA132ZMP 855.5 957.5 893.5 995.5 259.0 195.0 1" + 3/4" 334 345 

LA160MP 909.5 1028.0 947.5 1066.0 313.5 227.0 1" + 3/4" 359 371 

LA160ZLP 957.5 1076.0 995.5 1114.0 313.5 227.0 1" + 3/4" 359 371 

LG180ZMB 1020.0 1142.0 1058.0 1180.0 348.0 322.5 1 1/4" + 3/4" 485 497 

LG180ZLB 1020.0 1142.0 1058.0 1180.0 348.0 322.5 1 1/4" + 3/4" 485 497 

LG200LB 1025.0 1151.0 1063.0 1189.0 385.0 301.0 1 1/4" + 3/4" 535 547 

LG225S 1096.0 1335.0 1134.0 1373.0 442.0 325.0 2 x 1 1/2" 608 621 

LG225ZM 1156.0 1395.0 1194.0 1433.0 442.0 325.0 2 x 1 1/2" 664 667 

LG250ZM 1206.0 1445.0 - - 442.0 325.0 2 x 1 1/2" 801 - 

K4-LGI280ZM 1578.5 1805.5 - - 555.0 432.0 2 x 2 1/2" 1029 - 


[mm] 

3 - 185




DF/ZF 148 DZF 510 

Flange 


17.72 13.78 0.87 15.75 0.2 2.68 0.69 

21.65 17.72 0.98 19.69 0.2 2.56 0.69 

Output Shaft 


3.625 6.69 5.5 0.602 4.01 0.875 6.69 1-8UNC 

Gearcase 

KL AC AD SA DB P1 P2 P3 Q 

6.3 16.38 20.08 12.48 1.46 7.17 8.27 10.63 16.18 

Motor 



LA100Z - - 32.83 36.02 7.68 6.61 2 x 3/4" - 677 

LA112Z - - 32.19 35.37 8.62 7.13 2 x 3/4" - 701 

LA132SP 31.87 35.89 33.37 37.38 10.20 7.68 1" + 3/4" 703 728 

LA132ZMP 33.68 37.70 35.18 39.19 10.20 7.68 1" + 3/4" 723 747 

LA160MP 35.81 40.47 37.30 41.97 12.34 8.94 1" + 3/4" 778 805 

LA160ZLP 37.70 42.36 39.19 43.86 12.34 8.94 1" + 3/4" 778 805 

LG180ZMB 40.16 44.96 41.65 46.46 13.70 12.70 1 1/4" + 3/4" 1056 1083 

LG180ZLB 40.16 44.96 41.65 46.46 13.70 12.70 1 1/4" + 3/4" 1056 1083 

LG200LB 40.35 45.31 41.85 46.81 15.16 11.85 1 1/4" + 3/4" 1166 1193 

LG225S 43.15 52.56 44.65 54.06 17.40 12.80 2 x 1 1/2" 1327 - 

LG225ZM 45.51 54.92 47.01 56.42 17.40 12.80 2 x 1 1/2" 1429 - 

LG250ZM 49.59 58.46 - - 17.40 12.80 2 x 1 1/2" 1753 - 

K4-LGI280ZM 62.15 71.08 - - 21.85 17.01 2 x 2 1/2" 2269 - 


3 - 186 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


450 350 22 400 5 68 17,5 

550 450 25 500 5 65 17,5 

Output Shaft 


92,075 170 139,7 15,291 101,85 22,225 170 1“-8UNC 

Gearcase 


160 416 510 317 37 182 210 270 411 


DF/ZF 148 DZF 510 

Motor 



LA100Z - - 834.0 915.0 195.0 168.0 2 x 3/4" - 307 

LA112Z - - 817.5 898.5 219.0 181.0 2 x 3/4" - 318 

LA132SP 809.5 911.5 847.5 949.5 259.0 195.0 1" + 3/4" 319 330 

LA132ZMP 855.5 957.5 893.5 995.5 259.0 195.0 1" + 3/4" 328 339 

LA160MP 909.5 1028.0 947.5 1066.0 313.5 227.0 1" + 3/4" 353 365 

LA160ZLP 957.5 1076.0 995.5 1114.0 313.5 227.0 1" + 3/4" 353 365 

LG180ZMB 1020.0 1142.0 1058.0 1180.0 348.0 322.5 1 1/4" + 3/4" 479 491 

LG180ZLB 1020.0 1142.0 1058.0 1180.0 348.0 322.5 1 1/4" + 3/4" 479 491 

LG200LB 1025.0 1151.0 1063.0 1189.0 385.0 301.0 1 1/4" + 3/4" 529 541 

LG225S 1096.0 1335.0 1134.0 1373.0 442.0 325.0 2 x 1 1/2" 602 615 

LG225ZM 1156.0 1395.0 1194.0 1433.0 442.0 325.0 2 x 1 1/2" 648 661 

LG250ZM 1259.5 1485.0 - - 442.0 325.0 2 x 1 1/2" 795 - 

K4-LGI280ZM 1578.5 1805.5 - - 555.0 432.0 2 x 2 1/2" 1029 - 


[mm] 

3 - 187




DZ/ZZ 148 DZZ 510 

Flange 


13.39 9.45 11.81 11.81 1.06 M16x22 

Output Shaft 


3.625 6.69 5.5 0.602 4.01 0.875 7.99 1-8UNC 

Gearcase 


6.3 16.38 20.08 12.48 1.46 7.17 8.27 10.63 16.18 

Motor 



LA100Z - - 32.83 36.02 7.68 6.61 2 x 3/4" - 624 

LA112Z - - 32.19 35.37 8.62 7.13 2 x 3/4" - 648 

LA132SP 31.87 35.89 33.37 37.38 10.20 7.68 1" + 3/4" 666 675 

LA132ZMP 33.68 37.70 35.18 39.19 10.20 7.68 1" + 3/4" 686 695 

LA160MP 35.81 40.47 37.30 41.97 12.34 8.94 1" + 3/4" 741 752 

LA160ZLP 37.70 42.36 39.19 43.86 12.34 8.94 1" + 3/4" 741 752 

LG180ZMB 40.16 44.96 41.65 46.46 13.70 12.70 1 1/4" + 3/4" 1019 1030 

LG180ZLB 40.16 44.96 41.65 46.46 13.70 12.70 1 1/4" + 3/4" 1019 1030 

LG200LB 40.35 45.31 41.85 46.81 15.16 11.85 1 1/4" + 3/4" 1129 1140 

LG225S 43.15 52.56 44.65 54.06 17.40 12.80 2 x 1 1/2" 1290 - 

LG225ZM 45.51 54.92 47.01 56.42 17.40 12.80 2 x 1 1/2" 1391 - 

LG250ZM 49.59 58.46 - - 17.40 12.80 2 x 1 1/2" 1715 - 

K4-LGI280ZM 62.15 71.08 - - 21.85 17.01 2 x 2 1/2" 2218 - 


3 - 188 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


340 240 300 300 27 M16x22 

Output Shaft 


92,075 170 139,7 15,291 101,85 22,225 203 1“-8UNC 

Gearcase 


160 416 510 317 37 182 210 270 411 


DZ/ZZ 148 DZZ 510 

Motor 



LA100Z - - 834.0 915.0 195.0 168.0 2 x 3/4" - 283 

LA112Z - - 817.5 898.5 219.0 181.0 2 x 3/4" - 294 

LA132SP 809.5 911.5 847.5 949.5 259.0 195.0 1" + 3/4" 302 306 

LA132ZMP 855.5 957.5 893.5 995.5 259.0 195.0 1" + 3/4" 311 315 

LA160MP 909.5 1028.0 947.5 1066.0 313.5 227.0 1" + 3/4" 336 341 

LA160ZLP 957.5 1076.0 995.5 1114.0 313.5 227.0 1" + 3/4" 336 341 

LG180ZMB 1020.0 1142.0 1058.0 1180.0 348.0 322.5 1 1/4" + 3/4" 462 467 

LG180ZLB 1020.0 1142.0 1058.0 1180.0 348.0 322.5 1 1/4" + 3/4" 462 467 

LG200LB 1025.0 1151.0 1063.0 1189.0 385.0 301.0 1 1/4" + 3/4" 512 517 

LG225S 1096.0 1335.0 1134.0 1373.0 442.0 325.0 2 x 1 1/2" 585 587 

LG225ZM 1156.0 1395.0 1194.0 1433.0 442.0 325.0 2 x 1 1/2" 631 637 

LG250ZM 1259.5 1485.0 - - 442.0 325.0 2 x 1 1/2" 778 - 

K4-LGI280ZM 1578.5 1805.5 - - 555.0 432.0 2 x 2 1/2" 1006 - 


[mm] 

3 - 189



Foot mounted 

D/Z 168 DZ 510 

Mounting 

E F G H J 

14.96 19.69 2.56 1.54 5.71 

Output Shaft 


4.375 8.27 7 0.677 4.82 1 10.24 1-8UNC 

Gearcase 


16.54 7.26 15.75 23.23 20.87 18.11 22.83 13.98 0.24 1.65 8.54 8.98 12.01 19.45 

Motor 



LA132SP 34.57 38.58 36.18 40.20 10.20 7.68 1" + 3/4" 1083 1120 

LA132ZMP 36.38 40.39 37.99 42.01 10.20 7.68 1" + 3/4" 1103 1140 

LA160MP 38.50 43.17 40.12 44.78 12.34 8.94 1" + 3/4" 1155 1197 

LA160ZLP 40.39 45.06 42.01 46.67 12.34 8.94 1" + 3/4" 1155 1197 

LG180ZMB 42.85 47.66 44.47 49.27 13.70 12.70 1 1/4" + 3/4" 1433 1475 

LG180ZLB 42.85 47.66 44.47 49.27 13.70 12.70 1 1/4" + 3/4" 1433 1475 

LG200LB 43.05 48.01 44.67 49.63 15.16 11.85 1 1/4" + 3/4" 1544 1585 

LG225S 45.85 55.26 47.46 56.87 17.40 12.80 2 x 1 1/2" 1702 1746 

LG225ZM 48.21 57.62 49.82 59.23 17.40 12.80 2 x 1 1/2" 1804 1848 

LG250ZM 50.18 59.59 - - 17.40 12.80 2 x 1 1/2" 2128 - 

K4-LGI280ZM 64.86 73.80 - - 21.85 17.01 2 x 2 1/2" 2613 - 


3 - 190 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

380 500 65 39 145 

Output Shaft 


111,13 210 177,8 17,196 122,43 25,4 260 1“-8UNC 


D/Z 168 DZ 510 

Gearcase 


420 184,5 400 590 530 460 580 355 6 42 217 228 305 494 

Motor 



LA132SP 878.0 980.0 919.0 1021.0 259.0 195.0 1" + 3/4" 491 508 

LA132ZMP 924.0 1026.0 965.0 1067.0 259.0 195.0 1" + 3/4" 500 517 

LA160MP 978.0 1096.5 1019.0 1137.5 313.5 227.0 1" + 3/4" 524 543 

LA160ZLP 1026.0 1144.5 1067.0 1185.5 313.5 227.0 1" + 3/4" 524 543 

LG180ZMB 1088.5 1210.5 1129.5 1251.5 348.0 322.5 1 1/4" + 3/4" 650 669 

LG180ZLB 1088.5 1210.5 1129.5 1251.5 348.0 322.5 1 1/4" + 3/4" 650 669 

LG200LB 1093.5 1219.5 1134.5 1260.5 385.0 301.0 1 1/4" + 3/4" 700 719 

LG225S 1164.5 1403.5 1205.5 1444.5 442.0 325.0 2 x 1 1/2" 772 792 

LG225ZM 1224.5 1463.5 1265.5 1504.5 442.0 325.0 2 x 1 1/2" 818 838 

LG250ZM 1274.5 1513.5 1315.5 1554.5 442.0 325.0 2 x 1 1/2" 965 - 

K4-LGI280ZM 1647.5 1874.5 - - 555.0 432.0 2 x 2 1/2" 1185 - 


[mm] 

3 - 191




DF/ZF 168 DZF 510 

Flange 


17.72 13.78 1.22 15.75 0.2 2.56 0.69 

21.65 17.72 1.22 19.69 0.2 2.56 0.69 

25.98 21.65 1.22 23.62 0.24 2.56 0.87 

Output Shaft 


4.375 8.27 7 0.677 4.82 1 8.27 1-8UNC 

Gearcase 


7.42 18.5 22.83 14.09 1.65 9.33 9.76 12.8 19.45 

Motor 



LA132SP 34.57 38.58 36.18 40.20 10.20 7.68 1" + 3/4" 1028 1067 

LA132ZMP 36.38 40.39 37.99 42.01 10.20 7.68 1" + 3/4" 1047 1087 

LA160MP 38.50 43.17 40.12 44.78 12.34 8.94 1" + 3/4" 1103 1142 

LA160ZLP 40.39 45.06 42.01 46.67 12.34 8.94 1" + 3/4" 1103 1142 

LG180ZMB 42.85 47.66 44.47 49.27 13.70 12.70 1 1/4" + 3/4" 1378 1420 

LG180ZLB 42.85 47.66 44.47 49.27 13.70 12.70 1 1/4" + 3/4" 1378 1420 

LG200LB 43.05 48.01 44.67 49.63 15.16 11.85 1 1/4" + 3/4" 1488 1530 

LG225S 45.85 55.26 47.46 56.87 17.40 12.80 2 x 1 1/2" 1647 1691 

LG225ZM 48.21 57.62 49.82 59.23 17.40 12.80 2 x 1 1/2" 1749 1793 

LG250ZM 50.18 59.59 - - 17.40 12.80 2 x 1 1/2" 2073 - 

K4-LGI280ZM 64.86 73.80 - - 21.85 17.01 2 x 2 1/2" 2558 - 


3 - 192 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


450 350 31 400 5 65 17,5 

550 450 31 500 5 65 17,5 

660 550 31 600 6 65 22 

Output Shaft 


111,13 210 177,8 17,196 122,43 25,4 210 1“-8UNC 

Gearcase 


188,5 470 580 358 42 237 248 325 494 


DF/ZF 168 DZF 510 

Motor 



LA132SP 878.0 980.0 919.0 1021.0 259.0 195.0 1" + 3/4" 466 484 

LA132ZMP 924.0 1026.0 965.0 1067.0 259.0 195.0 1" + 3/4" 475 493 

LA160MP 978.0 1096.5 1019.0 1137.5 313.5 227.0 1" + 3/4" 500 518 

LA160ZLP 1026.0 1144.5 1067.0 1185.5 313.5 227.0 1" + 3/4" 500 518 

LG180ZMB 1088.5 1210.5 1129.5 1251.5 348.0 322.5 1 1/4" + 3/4" 625 644 

LG180ZLB 1088.5 1210.5 1129.5 1251.5 348.0 322.5 1 1/4" + 3/4" 625 644 

LG200LB 1093.5 1219.5 1134.5 1260.5 385.0 301.0 1 1/4" + 3/4" 675 694 

LG225S 1164.5 1403.5 1205.5 1444.5 442.0 325.0 2 x 1 1/2" 747 767 

LG225ZM 1224.5 1463.5 1265.5 1504.5 442.0 325.0 2 x 1 1/2" 793 813 

LG250ZM 1274.5 1513.5 1315.5 1554.5 442.0 325.0 2 x 1 1/2" 940 - 

K4-LGI280ZM 1647.5 1874.5 - - 555.0 432.0 2 x 2 1/2" 1160 - 


[mm] 

3 - 193




DZ/ZZ 168 DZZ 510 

Flange 


15.75 11.81 13.78 13.78 1.38 M20x34 

Output Shaft 


4.375 8.27 7 0.677 4.82 1 9.88 1-8UNC 

Gearcase 


7.42 18.5 22.83 14.09 1.65 9.33 9.76 12.8 19.45 

Motor 



LA132SP 34.57 38.58 36.18 40.20 10.20 7.68 1" + 3/4" 986 1025 

LA132ZMP 36.38 40.39 37.99 42.01 10.20 7.68 1" + 3/4" 1005 1045 

LA160MP 38.50 43.17 40.12 44.78 12.34 8.94 1" + 3/4" 1061 1100 

LA160ZLP 40.39 45.06 42.01 46.67 12.34 8.94 1" + 3/4" 1061 1100 

LG180ZMB 42.85 47.66 44.47 49.27 13.70 12.70 1 1/4" + 3/4" 1336 1378 

LG180ZLB 42.85 47.66 44.47 49.27 13.70 12.70 1 1/4" + 3/4" 1336 1378 

LG200LB 43.05 48.01 44.67 49.63 15.16 11.85 1 1/4" + 3/4" 1446 1488 

LG225S 45.85 55.26 47.46 56.87 17.40 12.80 2 x 1 1/2" 1605 1649 

LG225ZM 48.21 57.62 49.82 59.23 17.40 12.80 2 x 1 1/2" 1707 1751 

LG250ZM 50.18 59.59 - - 17.40 12.80 2 x 1 1/2" 2031 - 

K4-LGI280ZM 64.86 73.80 - - 21.85 17.01 2 x 2 1/2" 2516 - 


3 - 194 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 

BD AK AJ BB TAP BF 

400 300 350 35 M20x34 

Output Shaft 


111,13 210 177,8 17,196 122,43 25,4 251 1“-8UNC 

Gearcase 


188,5 470 580 358 42 237 248 325 494 


DZ/ZZ 168 DZZ 510 

Motor 



LA132SP 878.0 980.0 919.0 1021.0 259.0 195.0 1" + 3/4" 447 465 

LA132ZMP 924.0 1026.0 965.0 1067.0 259.0 195.0 1" + 3/4" 456 474 

LA160MP 978.0 1096.5 1019.0 1137.5 313.5 227.0 1" + 3/4" 481 499 

LA160ZLP 1026.0 1144.5 1067.0 1185.5 313.5 227.0 1" + 3/4" 481 499 

LG180ZMB 1088.5 1210.5 1129.5 1251.5 348.0 322.5 1 1/4" + 3/4" 606 625 

LG180ZLB 1088.5 1210.5 1129.5 1251.5 348.0 322.5 1 1/4" + 3/4" 606 625 

LG200LB 1093.5 1219.5 1134.5 1260.5 385.0 301.0 1 1/4" + 3/4" 656 675 

LG225S 1164.5 1403.5 1205.5 1444.5 442.0 325.0 2 x 1 1/2" 728 748 

LG225ZM 1224.5 1463.5 1265.5 1504.5 442.0 325.0 2 x 1 1/2" 774 794 

LG250ZM 1274.5 1513.5 1315.5 1554.5 442.0 325.0 2 x 1 1/2" 921 - 

K4-LGI280ZM 1647.5 1874.5 - - 555.0 432.0 2 x 2 1/2" 1141 - 


[mm] 

3 - 195



Foot mounted 

D/Z 188 DZ 510 

Mounting 

E F G H J 

19.69 22.83 3.94 1.54 5.51 

Output Shaft 


4.75 8.27 7 0.677 5.29 1.25 10.63 1-8UNC 

Gearcase 

BD KL B AC AD D BS DB P1 P2 P3 Q 

16.54 9.41 26.38 20.87 24.8 16.73 0.24 2.4 8.82 9.98 13.12 23.35 

Motor 



LA132SP - - 38.46 42.48 10.20 7.68 1" + 3/4" - 1438 

LA132ZMP - - 40.28 44.29 10.20 7.68 1" + 3/4" - 1458 

LA160MP 42.40 47.07 42.40 47.07 12.34 8.94 1" + 3/4" 1442 1508 

LA160ZLP 44.29 48.96 44.29 48.96 12.34 8.94 1" + 3/4" 1442 1508 

LG180ZMB 46.75 51.56 46.75 51.56 13.70 12.70 1 1/4" + 3/4" 1720 1784 

LG180ZLB 46.75 51.56 46.75 51.56 13.70 12.70 1 1/4" + 3/4" 1720 1784 

LG200LB 46.95 51.91 46.95 51.91 15.16 11.85 1 1/4" + 3/4" 1830 1894 

LG225S 49.74 59.15 49.74 59.15 17.40 12.80 2 x 1 1/2" 1991 2055 

LG225ZM 52.11 61.52 52.11 61.52 17.40 12.80 2 x 1 1/2" 2093 2156 

LG250ZM 54.07 63.48 - - 17.40 12.80 2 x 1 1/2" 2417 - 

K4-LGI280ZM 68.76 77.70 - - 21.85 17.01 2 x 2 1/2" 2900 - 


3 - 196 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Mounting 

E F G H J 

500 580 100 39 140 

Output Shaft 


120,65 210 177,8 17,196 134,37 31,75 270 1“-8UNC 

Gearcase 

BD KL B AC AD D BS DB P1 P2 P3 Q 

420 239 670 530 630 425 6 61 224 253,5 333,5 593 


D/Z 188 DZ 510 

Motor 



LA132SP - - 977.0 1079.0 259.0 195.0 1" + 3/4" - 652 

LA132ZMP - - 1023.0 1125.0 259.0 195.0 1" + 3/4" - 661 

LA160MP 1077.0 1195.5 1077.0 1195.5 313.5 227.0 1" + 3/4" 654 684 

LA160ZLP 1125.0 1243.5 1125.0 1243.5 313.5 227.0 1" + 3/4" 654 684 

LG180ZMB 1187.5 1309.5 1187.5 1309.5 348.0 322.5 1 1/4" + 3/4" 780 809 

LG180ZLB 1187.5 1309.5 1187.5 1309.5 348.0 322.5 1 1/4" + 3/4" 780 809 

LG200LB 1192.5 1318.5 1192.5 1318.5 385.0 301.0 1 1/4" + 3/4" 830 859 

LG225S 1263.5 1502.5 1263.5 1502.5 442.0 325.0 2 x 1 1/2" 903 932 

LG225ZM 1323.5 1562.5 1323.5 1562.5 442.0 325.0 2 x 1 1/2" 949 978 

LG250ZM 1373.5 1612.5 1373.5 1612.5 442.0 325.0 2 x 1 1/2" 1096 1125 

K4-LGI280ZM 1746.5 1973.5 1746.5 1973.5 555.0 432.0 2 x 2 1/2" 1315 1344 


[mm] 

3 - 197




DF/ZF 188 DZF 510 

Flange 


21.65 17.72 1.22 19.69 0.2 2.56 0.69 

25.98 21.65 1.22 23.62 0.24 3.17 0.87 

Output Shaft 


4.75 8.27 7 0.677 5.29 1.25 8.27 1-8UNC 

Gearcase 


9.41 20.87 24.8 16.73 2.4 8.82 9.98 13.12 23.35 

Motor 



LA132SP - - 38.46 42.48 10.20 7.68 1" + 3/4" - 1323 

LA132ZMP - - 40.28 44.29 10.20 7.68 1" + 3/4" - 1343 

LA160MP 42.40 47.07 42.40 47.07 12.34 8.94 1" + 3/4" 1327 1394 

LA160ZLP 44.29 48.96 44.29 48.96 12.34 8.94 1" + 3/4" 1327 1394 

LG180ZMB 46.75 51.56 46.75 51.56 13.70 12.70 1 1/4" + 3/4" 1605 1669 

LG180ZLB 46.75 51.56 46.75 51.56 13.70 12.70 1 1/4" + 3/4" 1605 1669 

LG200LB 46.95 51.91 46.95 51.91 15.16 11.85 1 1/4" + 3/4" 1715 1779 

LG225S 49.74 59.15 49.74 59.15 17.40 12.80 2 x 1 1/2" 1876 1940 

LG225ZM 52.11 61.52 52.11 61.52 17.40 12.80 2 x 1 1/2" 1978 2042 

LG250ZM 54.07 63.48 - - 17.40 12.80 2 x 1 1/2" 2302 - 

K4-LGI280ZM 68.76 77.70 - - 21.85 17.01 2 x 2 1/2" 2785 - 


3 - 198 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


550 450 31 500 5 65 17,5 

660 550 31 600 6 80,5 22 

Output Shaft 


120,65 210 177,8 17,196 134,37 31,75 210 1“-8UNC 

Gearcase 


239 530 630 425 61 224 253,5 333,5 593 


DF/ZF 188 DZF 510 

Motor 



LA132SP - - 977.0 1079.0 259.0 195.0 1" + 3/4" - 600 

LA132ZMP - - 1023.0 1125.0 259.0 195.0 1" + 3/4" - 609 

LA160MP 1077.0 1195.5 1077.0 1195.5 313.5 227.0 1" + 3/4" 602 632 

LA160ZLP 1125.0 1243.5 1125.0 1243.5 313.5 227.0 1" + 3/4" 602 632 

LG180ZMB 1187.5 1309.5 1187.5 1309.5 348.0 322.5 1 1/4" + 3/4" 728 757 

LG180ZLB 1187.5 1309.5 1187.5 1309.5 348.0 322.5 1 1/4" + 3/4" 728 757 

LG200LB 1192.5 1318.5 1192.5 1318.5 385.0 301.0 1 1/4" + 3/4" 778 807 

LG225S 1263.5 1502.5 1263.5 1502.5 442.0 325.0 2 x 1 1/2" 851 880 

LG225ZM 1323.5 1562.5 1323.5 1562.5 442.0 325.0 2 x 1 1/2" 897 926 

LG250ZM 1373.5 1612.5 1373.5 1612.5 442.0 325.0 2 x 1 1/2" 1044 1073 

K4-LGI280ZM 1746.5 1973.5 1746.5 1973.5 555.0 432.0 2 x 2 1/2" 1263 1292 


[mm] 

3 - 199




DZ/ZZ 188 DZZ 510 

Flange 


16.54 11.81 13.78 1.38 M20x34 

Output Shaft 


4.75 8.27 7 0.677 5.29 1.25 9.88 1-8UNC 

Gearcase 


9.13 20.87 24.8 16.73 2.4 8.82 9.98 13.11 23.35 

Motor 



LA132SP - - 38.46 42.48 10.20 7.68 1" + 3/4" - 1279 

LA132ZMP - - 40.28 44.29 10.20 7.68 1" + 3/4" - 1299 

LA160MP 42.40 47.07 42.40 47.07 12.34 8.94 1" + 3/4" 1283 1349 

LA160ZLP 44.29 48.96 44.29 48.96 12.34 8.94 1" + 3/4" 1283 1349 

LG180ZMB 46.75 51.56 46.75 51.56 13.70 12.70 1 1/4" + 3/4" 1561 1625 

LG180ZLB 46.75 51.56 46.75 51.56 13.70 12.70 1 1/4" + 3/4" 1561 1625 

LG200LB 46.95 51.91 46.95 51.91 15.16 11.85 1 1/4" + 3/4" 1671 1735 

LG225S 49.74 59.15 49.74 59.15 17.40 12.80 2 x 1 1/2" 1832 1896 

LG225ZM 52.11 61.52 52.11 61.52 17.40 12.80 2 x 1 1/2" 1934 1998 

LG250ZM 54.07 63.48 - - 17.40 12.80 2 x 1 1/2" 2258 - 

K4-LGI280ZM 68.76 77.70 - - 21.85 17.01 2 x 2 1/2" 2741 - 


3 - 200 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


420 300 350 35 M20x34 

Output Shaft 


120,65 210 177,8 17,196 134,37 31,75 251 1“-8UNC 

Gearcase 


232 530 630 425 61 227 253,5 333 593 


DZ/ZZ 188 DZZ 510 

Motor 



LA132SP - - 977.0 1079.0 259.0 195.0 1" + 3/4" - 580 

LA132ZMP - - 1023.0 1125.0 259.0 195.0 1" + 3/4" - 589 

LA160MP 1077.0 1195.5 1077.0 1195.5 313.5 227.0 1" + 3/4" 582 612 

LA160ZLP 1125.0 1243.5 1125.0 1243.5 313.5 227.0 1" + 3/4" 582 612 

LG180ZMB 1187.5 1309.5 1187.5 1309.5 348.0 322.5 1 1/4" + 3/4" 708 737 

LG180ZLB 1187.5 1309.5 1187.5 1309.5 348.0 322.5 1 1/4" + 3/4" 708 737 

LG200LB 1192.5 1318.5 1192.5 1318.5 385.0 301.0 1 1/4" + 3/4" 758 787 

LG225S 1263.5 1502.5 1263.5 1502.5 442.0 325.0 2 x 1 1/2" 831 860 

LG225ZM 1323.5 1562.5 1323.5 1562.5 442.0 325.0 2 x 1 1/2" 877 906 

LG250ZM 1373.5 1612.5 1373.5 1612.5 442.0 325.0 2 x 1 1/2" 1024 1053 

K4-LGI280ZM 1746.5 1973.5 1746.5 1973.5 555.0 432.0 2 x 2 1/2" 1243 1272 


[mm] 

3 - 201


Available Output Solid Shafts Inch 

Size U UY V VO KEY TAP M 

[inch] [inch] [inch] [inch] [inch] [inch] 

D/Z,DF/ZF18 

E, EF38 

D/Z,DF/ZF28 

3/4 0.83 1.57 0,01 3/16 x 3/16 x 1 1/4 1/4 - 20 x 0.63 

D/Z,DF/ZF38 

E, EF48 

D/Z,DF/ZF38 

1 1.11 1.97 0.252 1/4 x 1/4 x 1 1/2 3/8 - 16 x 0.87 

D/Z,DF/ZF48 

E, EF68 

1 1/4 1.36 2.36 0.133 1/4 x 1/4 x 1 7/8 3/8 - 16 x 0.87 

D/Z,DF/ZF48 

D/Z,DF/ZF48 

1 3/8 1.51 2.76 0.027 5/16 x 5/16 x 2 3/8 3/8 - 16 x 0.87 

D/Z,DF/ZF68 

E, EF88 

1 5/8 1.79 3.15 0.065 3/8 x 3/8 x 2 3/4 5/8 - 11 x 1.42 

E, EF108 

0,043 

D/Z,DF/ZF68 

D/Z,DF/ZF88 

2 1/8 2.35 3.94 

0,004 

1/2 x 1/2 x 3 1/2 3/4 - 10 x 1.65 

D/Z,DF/ZF88 

D/Z,DF/ZF108 2 3/8 2.65 4.72 

0,002 

5/8 x 5/8 x 4 1/4 3/4 - 10 x 1.65 

E, EF128 0,081 

E, EF148 2 3/4 3.03 5.51 0.671 5/8 x 5/8 x 4 1/4 3/4 - 10 x 1.65 

D/Z,DF/ZF108 

D/Z,DF/ZF128 

2 7/8 3.20 5.51 0.046 3/4 x 3/4 x 4 7/8 3/4 - 10 x 1.65 

D/Z,DF/ZF128 

D/Z,DF/ZF148 

3 5/8 4.01 6.69 0.602 7/8 x 7/8 x 5 1/2 1 - 8 x 1.97 

D/Z,DF/ZF148 

D/Z,DF/ZF168 

4 4.44 8.27 0.677 1 x 1 x 7 1 - 8 x 1.97 

D/Z,DF/ZF168 4 3/8 4.82 8.27 0.677 1 x 1 x 7 1 - 8 x 1.97 

D/Z,DF/ZF188 4 3/4 5.29 8.27 0.677 1 1/4 x 1 1/4 x 7 1 - 8 x 1.97 

Tolerances see page 1 - 4. Tap specification see page 1 - 7. 

3 - 202 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Available Output Solid Shafts Metric 



[mm] [mm] [mm] [mm] [mm] [mm] 

D/Z,DF/ZF18 

E, EF38 

D/Z,DF/ZF28 

20 22.5 40 

4 

5 

6 x 6 x 32 

6 x 6 x 30 

M6 x 16 

D/Z,DF/ZF38 

E, EF48 

25 28 50 7 8 x 7 x 40 M10 x 22 

E, EF68 

8 x 7 x 50 

D/Z,DF/ZF38 

D/Z,DF/ZF48 

30 33 60 7 

8 x 7 x 50 

M10 x 22 

D/Z,DF/ZF68 

E, EF88 

DR/ZR68 

40 43 80 5 12 x 8 x 70 M16 x 36 

D/Z,DF/ZF88 

E, EF108 

DR/ZR88 

50 53.5 100 10 14 x 9 x 80 M16 x 36 

D/Z,DF/ZF108 

E, EF128 

60 64 120 10 18 x 11 x 100 M20 x 42 

DR/ZR108 

20 x 12 x 125 

D/Z,DF/ZF128 

E, EF148 

70 74.5 140 15 

20 x 12 x 110 

M20 x 42 

DR/ZR128 80 85 170 20 22x14x125 M20 x 42 

D/Z,DF/ZF148 90 95 170 15 25 x 14 x 140 M24 x 50 

DR/ZR148 

D/Z,DF/ZF168 

100 106 210 15 28 x 16 x 180 M24 x 50 

DR/ZR168 110 116 210 15 28 x 16 x 180 M24 x 50 

D/Z,DF/ZF188 120 127 210 15 32 x 18 x 180 M24 x 50 


3 - 203


Tandem-Helical Gear Motors 

Gear Units P PC PCB C Gear Units P PC PCB C 

Z.38-Z28 

Z.38-D28 

D.48-Z28 

D.48-D28 

D.68-Z28 

D.68-D28 

D.88-Z28 

3 - 204 

DZ 710 

LA71 5.47 14.29 16.46 7.97 

LA71 5.47 14.23 16.40 7.97 

LA71Z 

LA90S 

5.47 

6.85 

15.04 

18.11 

17.20 

20.91 

8.72 

11.79 

D.88-D28 

LA71Z 

LA90S 

5.47 

6.85 

14.98 

18.05 

17.15 

20.85 

8.72 

11.79 

LA90ZL 6.85 21.65 24.45 15.33 LA90ZL 6.85 21.59 24.39 15.33 

LA100L 7.68 24.09 27.28 17.78 

LA71 

D.108-Z38 

1) 5.47 19.07 21.24 10.18 

LA71 5.47 14.29 16.46 7.97 LA71Z 1) 5.47 19.82 21.99 10.93 

LA71Z 5.47 15.04 17.20 8.72 LA80 1) 6.16 20.53 23.03 11.63 

LA90S 6.85 18.11 20.91 11.79 LA90S 1) 6.85 21.75 24.55 12.85 

LA90ZL 6.85 21.65 24.45 15.33 LA100L1) 7.68 26.32 29.51 17.42 

LA71 5.47 14.74 16.91 7.97 LA112M1) LA71Z 5.47 15.49 17.66 8.72 LA71 

8.62 25.83 29.02 16.93 

2) 5.47 19.53 21.69 10.18 

LA90S 6.85 18.56 21.36 11.79 LA71Z 2) 5.47 20.28 22.44 10.93 

LA90ZL 6.85 22.11 24.90 15.33 LA80 2) 6.16 20.98 23.48 11.63 

LA100L 7.68 24.55 27.74 17.78 LA90S 2) 6.85 22.20 25.00 12.85 

LA71 5.47 14.74 16.91 7.97 LA100L 2) 7.68 26.77 29.96 17.42 

LA71Z 5.47 15.49 17.66 8.72 LA112M 2) 8.62 26.28 29.47 16.93 

LA90S 6.85 18.56 21.36 11.79 

LA71 5.47 19.67 21.83 10.77 

LA90ZL 

LA71 

6.85 

5.47 

22.11 

14.57 

24.90 

16.73 

15.33 

7.97 

D.108-D38 

LA71Z 

LA80 

5.47 

6.16 

20.41 

21.12 

22.58 

23.62 

11.52 

12.22 

LA71Z 5.47 15.31 17.48 8.72 LA90S 6.85 22.34 25.14 13.44 

LA90S 6.85 18.39 21.18 11.79 

LA71 5.47 19.21 21.38 10.18 

LA90ZL 6.85 21.93 24.72 15.33 LA71Z 5.47 19.96 22.13 10.93 

LA100L 

LA71 

7.68 

5.47 

24.37 

14.57 

27.56 

16.73 

17.78 

7.97 

D.128-Z38 

LA80 

LA90S 

6.16 

6.85 

20.67 

21.89 

23.17 

24.69 

11.63 

12.85 

LA71Z 5.47 15.31 17.48 8.72 LA100L 7.68 26.46 29.65 17.42 

LA90S 6.85 18.39 21.18 11.79 LA112M 8.62 25.96 29.15 16.93 

LA90ZL 6.85 21.93 24.72 15.33 

LA71 5.47 19.80 21.97 10.77 

LA71 

LA71Z 

5.47 

5.47 

14.23 

14.98 

16.40 

17.15 

7.97 

8.72 

D.128-D38 

LA71Z 

LA80 

5.47 

6.16 

20.55 

21.26 

22.72 

23.76 

11.52 

12.22 

LA90S 6.85 18.05 20.85 11.79 LA90S 6.85 22.48 25.28 13.44 

LA90ZL 6.85 21.59 24.39 15.33 

LA71 5.47 21.87 24.04 9.96 

LA100L 7.68 24.04 27.22 17.78 D.128-Z48 LA71Z 5.47 22.62 24.78 10.71 

LA80 6.16 23.33 25.83 11.42 

1) i ges ≥3797 2) i ges




(450) 655-7447 


www.dstech.ca 



DZ 710 


LA90S 6.85 24.55 27.34 12.64 

LA90S 6.85 24.61 27.40 13.31 

LA90ZL 6.85 26.32 29.11 14.41 D.168-D48 LA90ZL 6.85 26.38 29.17 15.08 

D.128-Z48 

LA100L 

LA112M 

7.68 

8.62 

29.11 

28.60 

32.30 

31.79 

17.20 

16.69 

LA100L 

LA71 

7.68 

5.47 

29.17 

24.65 

32.36 

26.81 

17.87 

9.72 

LA132S 10.20 29.94 33.96 18.03 LA71Z 5.47 25.39 27.56 10.47 

LA132ZM 10.20 31.75 35.77 19.84 LA80 6.16 26.10 28.60 11.18 

LA71 5.47 19.09 21.26 10.18 LA90S 6.85 27.32 30.12 12.40 

LA71Z 5.47 19.84 22.01 10.93 LA90ZL 6.85 29.09 31.89 14.17 

LA80 6.16 20.55 23.05 11.63 D.168-Z68 LA100L 7.68 31.89 35.08 16.97 

D.148-Z38 LA90S 6.85 21.77 24.57 12.85 LA112M 8.62 31.30 34.49 16.38 

LA90ZL 6.85 23.54 26.34 14.63 LA132S 10.20 32.56 36.57 17.64 

LA100L 7.68 26.34 29.53 17.42 LA132ZM 10.20 34.37 38.39 19.45 

LA112M 8.62 25.85 29.04 16.93 LA160M 12.34 36.59 41.26 21.67 

LA71 5.47 19.69 21.85 10.77 LA160ZL 12.34 38.48 43.15 23.56 

LA71Z 5.47 20.43 22.60 11.52 

LA71 5.47 19.65 21.81 9.96 

D.148-D38 LA80 6.16 21.14 23.64 12.22 LA71Z 5.47 20.39 22.56 10.71 

LA90S 6.85 22.36 25.16 13.44 LA80 6.16 21.10 23.60 11.42 

LA90ZL 6.85 24.13 26.93 15.22 LA90S 6.85 22.32 25.12 12.64 

LA71 5.47 21.71 23.88 9.96 D.188-Z48 LA90ZL 6.85 24.09 26.89 14.41 

LA71Z 5.47 22.46 24.63 10.71 LA100L 7.68 26.89 30.08 17.20 

LA80 6.16 23.17 25.67 11.42 LA112M 8.62 26.38 29.57 16.69 

LA90S 6.85 24.39 27.19 12.64 LA132S 10.20 27.72 31.73 18.03 

D.148-Z48 LA90ZL 6.85 26.16 28.96 14.41 LA132ZM 10.20 29.53 33.54 19.84 

LA100L 7.68 28.96 32.15 17.20 

LA71 5.47 20.31 22.48 10.63 

LA112M 8.62 28.44 31.63 16.69 LA71Z 5.47 21.06 23.23 11.38 

LA132S 

LA132ZM 

10.20 

10.20 

29.78 

31.59 

33.80 

35.61 

18.03 

19.84 

D.188-D48 

LA80 

LA90S 

6.16 

6.85 

21.77 

22.99 

24.27 

25.79 

12.09 

13.31 

LA71 5.47 21.26 23.43 9.96 LA90ZL 6.85 24.76 27.56 15.08 

D.168-Z48 LA71Z 5.47 22.01 24.17 10.71 LA100L 7.68 27.56 30.75 17.87 

LA80 6.16 22.72 25.22 11.42 

LA71 5.47 23.03 25.20 9.72 

LA90S 6.85 23.94 26.73 12.64 LA71Z 5.47 23.78 25.94 10.47 

LA90ZL 6.85 25.71 28.50 14.41 D.188-Z68 LA80 6.16 24.49 26.99 11.18 

D.168-Z48 

LA100L 

LA112M 

7.68 

8.62 

28.50 

27.99 

31.69 

31.18 

17.20 

16.69 

LA90S 

LA90ZL 

6.85 

6.85 

25.71 

27.48 

28.50 

30.28 

12.40 

14.17 

LA132S 10.20 29.33 33.35 18.03 

LA100L 7.68 30.28 33.46 16.97 

LA132ZM 10.20 31.14 35.16 19.84 LA112M 8.62 29.69 32.87 16.38 

D.168-D48 

LA71 

LA71Z 

5.47 

5.47 

21.93 

22.68 

24.09 

24.84 

10.63 

11.38 

D.188-Z68 

LA132S 

LA132ZM 

10.20 

10.20 

30.94 

32.76 

34.96 

36.77 

17.64 

19.45 

LA80 6.16 23.39 25.89 12.09 LA160M 12.34 34.98 39.65 21.67 

LA160ZL 12.34 36.87 41.54 23.56 

[inch] 

3 - 205


3 - 206 

DZ 710 

[mm] 


LA71 139.0 363.0 418.0 202.5 

LA71 139.0 361.5 416.5 202.5 

Z.38-Z28 

LA71Z 

LA90S 

139.0 

174.0 

382.0 

460.0 

437.0 

531.0 

221.5 

299.5 

D.88-D28 

LA71Z 

LA90S 

139.0 

174.0 

380.5 

458.5 

435.5 

529.5 

221.5 

299.5 

LA90ZL 174.0 550.0 621.0 389.5 LA90ZL 174.0 548.5 619.5 389.5 

LA100L 195.0 612.0 693.0 451.5 

LA71 1) 139.0 484.5 539.5 258.5 

LA71 139.0 363.0 418.0 202.5 LA71Z 1) 139.0 503.5 558.5 277.5 

Z.38-D28 

LA71Z 

LA90S 

139.0 

174.0 

382.0 

460.0 

437.0 

531.0 

221.5 

299.5 

1) LA80 

1) LA90S 

156.5 

174.0 

521.5 

552.5 

585.0 

623.5 

295.5 

326.5 

LA90ZL 174.0 550.0 621.0 389.5 1) LA100L 195.0 668.5 749.5 442.5 

LA71 

LA71Z 

139.0 

139.0 

374.5 

393.5 

429.5 

448.5 

202.5 

221.5 

D.108-Z38 

1) LA112M 

2) LA71 

219.0 

139.0 

656.0 

496.0 

737.0 

551.0 

430.0 

258.5 

D.48-Z28 LA90S 174.0 471.5 542.5 299.5 LA71Z 2) 139.0 515.0 570.0 277.5 

LA90ZL 174.0 561.5 632.5 389.5 LA80 2) 156.5 533.0 596.5 295.5 

LA100L 195.0 623.5 704.5 451.5 LA90S 2) 174.0 564.0 635.0 326.5 

LA71 139.0 374.5 429.5 202.5 2) LA100L 195.0 680.0 761.0 442.5 

D.48-D28 

LA71Z 

LA90S 

139.0 

174.0 

393.5 

471.5 

448.5 

542.5 

221.5 

299.5 

2) LA112M 

LA71 

219.0 

139.0 

667.5 

499.5 

748.5 

554.5 

430.0 

273.5 

LA90ZL 

LA71 

174.0 

139.0 

561.5 

370.0 

632.5 

425.0 

389.5 

202.5 

D.108-D38 

LA71Z 

LA80 

139.0 

156.5 

518.5 

536.5 

573.5 

600.0 

292.5 

310.5 

LA71Z 139.0 389.0 444.0 221.5 LA90S 174.0 567.5 638.5 341.5 

D.68-Z28 LA90S 174.0 467.0 538.0 299.5 

LA71 139.0 488.0 543.0 258.5 

LA90ZL 174.0 557.0 628.0 389.5 LA71Z 139.0 507.0 562.0 277.5 

LA100L 

LA71 

195.0 

139.0 

619.0 

370.0 

700.0 

425.0 

451.5 

202.5 

D.128-Z38 

LA80 

LA90S 

156.5 

174.0 

525.0 

556.0 

588.5 

627.0 

295.5 

326.5 

D.68-D28 

LA71Z 

LA90S 

139.0 

174.0 

389.0 

467.0 

444.0 

538.0 

221.5 

299.5 

LA100L 

LA112M 

195.0 

219.0 

672.0 

659.5 

753.0 

740.5 

442.5 

430.0 

LA90ZL 174.0 557.0 628.0 389.5 

LA71 139.0 503.0 558.0 273.5 

LA71 

LA71Z 

139.0 

139.0 

361.5 

380.5 

416.5 

435.5 

202.5 

221.5 

D.128-D38 

LA71Z 

LA80 

139.0 

156.5 

522.0 

540.0 

577.0 

603.5 

292.5 

310.5 

D.88-Z28 LA90S 174.0 458.5 529.5 299.5 LA90S 174.0 571.0 642.0 341.5 

LA90ZL 174.0 548.5 619.5 389.5 

LA71 139.0 555.5 610.5 253.0 

LA100L 195.0 610.5 691.5 451.5 D.128-Z48 LA71Z 139.0 574.5 629.5 272.0 

LA80 156.5 592.5 656.0 290.0 

1) i ges≥3797 2) i ges




(450) 655-7447 


www.dstech.ca 



DZ 710 


LA90S 174.0 623.5 694.5 321.0 

LA90S 174.0 625.0 696.0 338.0 

D.128-Z48 

LA90ZL 

LA100L 

174.0 

195.0 

668.5 

739.5 

739.5 

820.5 

366.0 

437.0 

D.168-D48 LA90ZL 

LA100L 

174.0 

195.0 

670.0 

741.0 

741.0 

822.0 

383.0 

454.0 

LA112M 219.0 726.5 807.5 424.0 

LA71 139.0 626.0 681.0 247.0 

D.128-Z48 

LA132S 

LA132ZM 

259.0 

259.0 

760.5 

806.5 

862.5 

908.5 

458.0 

504.0 

LA71Z 

LA80 

139.0 

156.5 

645.0 

663.0 

700.0 

726.5 

266.0 

284.0 

LA71 139.0 485.0 540.0 258.5 LA90S 174.0 694.0 765.0 315.0 

LA71Z 139.0 504.0 559.0 277.5 LA90ZL 174.0 739.0 810.0 360.0 

LA80 156.5 522.0 585.5 295.5 D.168-Z68 LA100L 195.0 810.0 891.0 431.0 

D.148-Z38 LA90S 174.0 553.0 624.0 326.5 LA112M 219.0 795.0 876.0 416.0 

LA90ZL 174.0 598.0 669.0 371.5 LA132S 259.0 827.0 929.0 448.0 

LA100L 195.0 669.0 750.0 442.5 LA132ZM 259.0 873.0 975.0 494.0 

LA112M 219.0 656.5 737.5 430.0 LA160M 313.5 929.5 1048.0 550.5 

LA71 139.0 500.0 555.0 273.5 LA160ZL 313.5 977.5 1096.0 598.5 

LA71Z 139.0 519.0 574.0 292.5 

LA71 139.0 499.0 554.0 253.0 

D.148-D38 LA80 156.5 537.0 600.5 310.5 LA71Z 139.0 518.0 573.0 272.0 

LA90S 174.0 568.0 639.0 341.5 LA80 156.5 536.0 599.5 290.0 

LA90ZL 174.0 613.0 684.0 386.5 LA90S 174.0 567.0 638.0 321.0 

LA71 139.0 551.5 606.5 253.0 D.188-Z48 LA90ZL 174.0 612.0 683.0 366.0 

LA71Z 139.0 570.5 625.5 272.0 LA100L 195.0 683.0 764.0 437.0 

LA80 156.5 588.5 652.0 290.0 LA112M 219.0 670.0 751.0 424.0 

LA90S 174.0 619.5 690.5 321.0 LA132S 259.0 704.0 806.0 458.0 

D.148-Z48 LA90ZL 174.0 664.5 735.5 366.0 LA132ZM 259.0 750.0 852.0 504.0 

LA100L 195.0 735.5 816.5 437.0 

LA71 139.0 516.0 571.0 270.0 

LA112M 219.0 722.5 803.5 424.0 LA71Z 139.0 535.0 590.0 289.0 

LA132S 

LA132ZM 

259.0 

259.0 

756.5 

802.5 

858.5 

904.5 

458.0 

504.0 

D.188-D48 

LA80 

LA90S 

156.5 

174.0 

553.0 

584.0 

616.5 

655.0 

307.0 

338.0 

LA71 139.0 540.0 595.0 253.0 LA90ZL 174.0 629.0 700.0 383.0 

D.168-Z48 LA71Z 139.0 559.0 614.0 272.0 LA100L 195.0 700.0 781.0 454.0 

LA80 156.5 577.0 640.5 290.0 

LA71 139.0 585.0 640.0 247.0 

LA90S 174.0 608.0 679.0 321.0 LA71Z 139.0 604.0 659.0 266.0 

LA90ZL 174.0 653.0 724.0 366.0 D.188-Z68 LA80 156.5 622.0 685.5 284.0 

D.168-Z48 

LA100L 

LA112M 

195.0 

219.0 

724.0 

711.0 

805.0 

792.0 

437.0 

424.0 

LA90S 

LA90ZL 

174.0 

174.0 

653.0 

698.0 

724.0 

769.0 

315.0 

360.0 

LA132S 259.0 745.0 847.0 458.0 

LA100L 195.0 769.0 850.0 431.0 

LA132ZM 259.0 791.0 893.0 504.0 LA112M 219.0 754.0 835.0 416.0 

D.168-D48 

LA71 

LA71Z 

139.0 

139.0 

557.0 

576.0 

612.0 

631.0 

270.0 

289.0 

D.188-Z68 

LA132S 

LA132ZM 

259.0 

259.0 

786.0 

832.0 

888.0 

934.0 

448.0 

494.0 

LA80 156.5 594.0 657.5 307.0 LA160M 313.5 888.5 1007.0 550.5 

LA160ZL 313.5 936.5 1055.0 598.5 

[mm] 

3 - 207


Helical Gear Units with 

Agitator Flange 

Agitator-Design DZR 

Heavy-Duty Design 

Large fixed bearing with long distance between bearings on the output shaft to carry heavy radial and axial loads, especially for long 

shafts of mixer or agitator. 

Optimized design resulting in no axial force transmission through the gear-housing. 

Optional Dry-Well Design 

For mounting position V1-00, safety against possible oil-leakage is made possible by diverting any leaked oil to a safety chamber with 

an additional ‘V’-Ring (1) and detecting the leakage either through a sight glass or electronic sensor (2). 

Optional Re-Greasing System (3) 

Various Output Shaft Sealing System Possible. 

Bearing Life Time Calculation 

on request or in electronic catalogue. 

3 - 208 

2 1 3 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Helical Gear Units with Agitator flange 

BD ≥ 17.72" 

BD ≥ 450mm 


Inch 

Dimensions in 

Model BD AK GA BB GL BT GB VO U Y AJ TAP M AM P2 P3 SA KL AD AC DB 

mm 

Add. 

V3 V UY BF Q 

Weight* 

DR/ZR68 

13.78 9.84 0.71 0.28 3.11 

350 250 18 7 79 

6.50 2.24 

165 57 

- 

- 

3 1/2 

88.9 

2 

50.8 

3.94 

100 

1/2 

12.7 

2.22 

56.4 

11.81 3/4-10x1.65 11.81 

4.29 5.87 

300 UNC 300 

0.69 9.76 

109 149 

17.5 248 

5.67 

144 

3.60 10.35 8.11 

91.5 263 206 

0 

0 

53 

24 

DR/ZR88 

13.78 9.84 0.71 0.28 3.62 7.28 2.44 

350 250 18 7 92 185 62 

- 

- 

4 1/4 

108.0 

2 3/8 

60.33 

4.72 

120 

5/8 

15.9 

2.65 

67.3 

11.81 3/4-10x1.65 14.17 

5.28 7.13 

300 UNC 360 

0.69 12.05 

134 181 

17.5 306 

7.17 

182 

5.08 13.07 10.24 

129 332 260 

0 

0 

101 

46 

17.72 13.78 0.87 0.28 3.07 8.27 2.83 

DR/ZR108 

450 350 22 7 78 210 72 

0.67 

17.0 

4 1/4 

108.0 

2 3/4 

69.85 

5.51 

140 

5/8 

15.9 

3.03 

77.0 

15.75 3/4-10x1.65 16.54 

6.97 8.98 

400 UNC 420 

0.69 13.98 

177 228 

17.5 355 

8.64 4.98 16.14 12.83 

219.5 126.5 410 326 

0 

0 

181 

82 

21.65 17.72 0.98 0.31 3.98 9.92 3.19 

DR/ZR128 

550 450 25 8 101 252 81 

0.83 

21.2 

4 7/8 

123.8 

3 1/8 

79.38 

6.69 

170 

3/4 

19.1 

3.45 

87.7 

19.69 3/4-10x1.65 19.69 

7.64 10.35 9.84 

500 UNC 500 

0.69 16.61 

194 263 250 

17.5 422 

5.75 18.19 14.33 

146 462 364 

0 

0 

187 

85 

21.65 17.72 0.98 0.31 4.45 9.92 3.19 

DR/ZR148 

550 450 25 8 113 252 81 

0.68 

17.2 

7 

177.8 

4 

101.6 

8.27 

210 

1 19.69 

25.4 500 

4.44 0.69 

112.8 17.5 

1-8x1.97 

UNC 

23.62 

7.50 10.63 12.48 6.30 20.08 16.38 1.46 

600 

18.07 190. 

270 317 160 510 416 37 

459 5 

207 

94 

25.98 21.65 1.10 0.31 4.45 10.63 3.39 

DR/ZR168 

660 550 28 8 113 270 86 

0.68 

17.2 

7 

177.8 

4 3/8 

111.13 

8.27 

210 

1 23.62 

25.4 600 

4.82 0.87 

122.4 22 

1-8x1.97 

UNC 

25.98 

9.76 12.80 14.09 7.42 22.83 18.50 1.65 

660 

21.22 

248 325 358 188.5 580 470 42 

539 

547 

248 


* To get the weight of the complete drive, the additional weight must be added to the weight of the gear unit in flange design DZ/ZZ. 

Eg:- Weight DZ88-LA112M (223 lb / 101 kg) + additional weight DR88 (101 lb / 46 kg) = total weight DR88-LA112M (324 lb / 147 kg) 

3 - 209



Mounting positions 

When ordering, please state the mounting position in order to assure correct oil quantity. 

In case of mounting position other than shown here with regard to the oil quantity please contact SIEMENS. 

IM designations correspond to IEC 60034-7. 

1 ... 4 Position of terminal box, see also Electrical Part. 

Oil fitting 

Frame size 38: 

V Oil fitter inlet / Oil drain 

From frame size 48: 

* on opposite side 

3 - 210 

Oil level Ventilation Oil drain Dipstick 

E B3 (IM B3) E V5 (IM V5) 

V 

2 

1 

4 

2 1 4 

E V6 (IM V6) E B8 (IM B8) 

* 

V 

4 1 2 

E B7 (IM B7) E B6 (IM B6) 

2 

1 

3 

V 

4 

* 

4 

V 

1 

V 

V 

3 

1 

4 

2 

2 

3 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 








Oil fitting 





Oil level Ventilation Oil drain Dipstick 

EF B5 (IM B5) 

EZ B14 (IM B14) 

V 

EF V3 (IM V3) 

EZ V19 (IM V19) 

4 

EF B5-03 (IM B5-03) 

EZ B14-03 (IM B14-03) 

V 

1 

1 2 

2 

1 

4 

EF V1 (IM V1) 

EZ V18 (IM V18) 

2 

V 

1 4 

EF B5-02 (IM B5-02) 

EZ B14-02 (IM B14-02) 

V 1 V 

2 

* 

4 

3 

* 

2 

3 

EF B5-00 (IM B5-00) 

EZ B14-00 (IM B14-00) 

4 

V 

3 

1 

2 

4 

3 - 211








Oil fitting 

Frame size 18, 28: 

These types are supplied with lifetime-lubrication. Vent-, oil-level- and oil drain-plugs are not available. 





2 

3 

3 - 212 

2-stage Gear Units 


Oil level Ventilation Oil drain 

D/Z38-D/Z88 D/Z B3 (IM B3) D/Z V5 (IM V5) 

D/Z V6 (IM V6) D/Z B8 (IM B8) 

* 

4 

V 

* 

2 

1 

4 

* 

2 3 

D/Z B7 (IM B7) D/Z B6 (IM B6) 

V 

2 

1 

V 

1 2 

3 

4 

* 

4 

1 

2 

V 

3 

1 

V 

1 

* 

4 

2 

2 

V 

4 

3 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 








Oil fitting 


2 

3 



D/Z108-D/Z168 


D/Z B3 (IM B3) D/Z V5 (IM V5) 

2 

1 

4 

* 

1 4 


* 1 3 


2 

4 

1 

3 

1 2 

4 

* 

2 

3 

1 

4 

2 

4 2 

* 3 

2 

3 - 213








Oil fitting 


2 

3 

4 

D/Z188 

3 - 214 



Tandem-Gear Units 


D/Z B3 (IM B3) D/Z V5 (IM V5) 

* 

2 

1 

4 

1 4 


* 

4 


2 

3 

1 2 

1 

4 

4 

4 

2 

4 

1 3 

3 

1 

* 

2 

2 

* 2 3 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


D./Z.38-D./Z.88, DR/ZR68-DR/ZR88 







Oil fitting 

Frame size 18, 28: These types are supplied with lifetime-lubrication. Vent-, oil-level- and oil drain-plugs are not available. 

Frame size 38: V Oil fitter inlet / Oil drain 



2 

3 



ZF, DF/ZF B5 (IM B5) 

ZZ, DZ/ZZ B14 (IM B14) 

V 


* 

2 

1 

4 

ZF, DF/ZF V1 (IM V1) 

ZZ, DZ/ZZ V18 (IM V18) 

ZF, DF/ZF V3 (IM V3) 

ZZ, DZ/ZZ V19 (IM V19) DR/ZR68 -DR/ZR88 B5 (IM B5) 

* 

4 

V 

1 2 

* 

2 3 

DR/ZR68 -DR/ZR88 V1 (IM V1) DR/ZR68 -DR/ZR88 V3 (IM V3) 

2 1 4 

* 

2 3 

* 

2 

V 

4 

1 

4 

* 

1 2 

2 

1 

4 

3 - 215








Oil fitting 


2 2-stage Gear Units 


D./Z.108-D./Z.168 

3 - 216 


DF/ZF B5 (IM B5) 

DZ/ZZ B14 (IM B14) 

2 

1 

4 

* 

DF/ZF V1 (IM V1) 

DZ/ZZ V18 (IM V18) 

1 4 


DZ/ZZ V19 (IM V19) DR/ZR B5 (IM B5) 

* 1 

4 

1 2 

DR/ZR V1 (IM V1) DR/ZR V3 (IM V3) 

2 

1 

4 

* 3 

2 

* 

2 

4 

* 

1 2 

2 

4 

* 3 

2 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


D./Z.188 







Oil fitting 


2 

3 

4 



Tandem-Gear Units 


DF/ZF B5 (IM B5) 

DZ/ZZ B14 (IM B14) 



* 

4 

* 

2 

1 

4 

1 2 



4 

2 

1 4 

* 2 3 

3 - 217


Tandem-Helical Gear Motors and Tandem-Gear Units 




Note: 

In a horizontal mounting position the smaller gear unit generally is turned to the bottom. 


1 ... 4 

Oil fitting 

3 - 218 

Position of terminal box, see also Electrical Part. 

Frame size 28/38 (smaller gear unit): 




2 

3 



Main Gear Unit 


V 

* 

* 

2 3 

V 

Main Gear 

Unit 

* 

Main Gear 

Unit 

V 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Lubrication 

‚ 


MOTOX-Helical Gear Units of sizes 48...188 are furnished with filler, oil level and drain plug. Before starting operations the separately 

supplied breather plug has to replace the filler plug. 

The sizes 18 ... 28 have no venting, oil level and oil drain plug. Because of the low thermal load, no lubricant-change is necessary. 

E./D./Z. 38 gear units have one oil plug, ventilation of this gear units is not necessary. Speed reducers are shipped with their lubricant, 

ready for operation. In order to fill the housings with adequate amount of lubricant, working conditions have to be specified in the 

order. Only blended, age-resistant and non-foaming EP oils (FZG test DIN 51354 load stage > 12) are used. 

Do not mix oils of different manufacturers. We recommend the oils listed. This is, of course, no exclusive recommendation and equivalent 

lubricants of other manufacturers can be used. 

During an oil change, only oils of the same type (for example CLP) and with the same viscosity class (for example VG 220) may be 

mixed. Do not mix differing types of oil (e.g. CLP and PGLP) under any circumstances. 

Biologically decomposable, environment- friendly oils based on synthetic or native ester with water hazard class 1or 2 respectively or 

oils with USDA -H1/-H2 acceptance can be supplied on request. 

Maintenance 

of the helical gear units has to be carried out in accordance with the Operating Instructions manual supplied with the units. 

Lubricant selection table 

Ambient 

temperature °C 

-10 ... + 40 

-20* ... + 50 

0* ... + 60* 

Marking 

according to 

DIN 51502 

CLP 

ISO VG 220 

CLP PG 

ISO VG 220 

CLP PG 

ISO VG 460 

CLP 220S 

- 

- 

Degol 

BG 220 

Degol 

GS 220 

Degol 

GS 450 

Energol 

GR-XP 220 

Enersyn 

SG-XP 220 

Enersyn 

SG-XP 460 

Other brands on request or see operating instruction BA2110. 

Alpha SP 220 

Optigear BM220 

Tribol 1100/220 

Optiflex A220 

Tribol 800/220 

Optiflex A460 


Examples of Lubricants 

Falcon 

CLP220 

Polydea 

PGLP 220 

Polydea 

PGLP 460 

Spartan 

EP220 

Glycolube 

220 

Glycolube 

460 

Renolin 

CLP 220 

Renolin 

PG 220 

Renolin 

PG 460 

Klüberoil 

GEM 1-220 

Syntheso 

D 220 EP 

Syntheso 

D 460 EP 

Mobilgear 

XMP 220 

* Note: 

Ambient temperatures for motors according to EN 60034-1; see “Greasing of the bearings” in electrical section of this catalogue. 

- 

- 

Omala 

220 

Tivela S 

220 

Tivela S 

460 

3 - 219


Oil quantities (litre / US gallon) 

The quantities listed in the following tables are reference values. 

The exact oil quantities are specified on the rating plates of the drives. 

Important: 

The value on the left (italic) is in litres; the value on the right is in U.S. gallons. 

Type Mounting position 

3 - 220 

B3 B5 B6 B7 B8 V1 V3 V5 V6 

B14 V18 V19 

E.38 0.20 / 0.05 0.20 / 0.05 0.30 / 0.08 0.30 / 0.08 0.40 / 0.11 0.50 / 0.13 0.60 / 0.16 0.50 / 0.13 0.60 / 0.16 

E.48 0.30 / 0.08 0.30 / 0.08 0.60 / 0.16 0.50 / 0.13 0.70 / 0.18 0.70 / 0.18 1.1 / 0.29 0.70 / 0.18 1.1 / 0.29 

E.68 0.50 / 0.13 0.50 / 0.13 1.00 / 0.26 1.1 / 0.29 1.5 / 0.4 1.7 / 0.45 1.9 / 0.5 1.8 / 0.48 1.9 / 0.5 

E.88 0.80 / 0.21 0.70 / 0.18 1.6 / 0.42 1.6 / 0.42 2.5 / 0.66 2.2 / 0.58 3.8 / 1 2.3 / 0.61 3.8 / 1 

E.108 1.3 / 0.34 1.00 / 0.26 2.7 / 0.71 2.8 / 0.74 4.6 / 1.22 3.7 / 0.98 6.6 / 1.74 3.8 / 1 6.6 / 1.74 

E.128 2.3 / 0.61 2.3 / 0.61 5.3 / 1.4 5.2 / 1.37 7.2 / 1.9 6.4 / 1.69 10.9 / 2.88 6.4 / 1.69 10.9 / 2.88 

E.148 4.0 / 1.06 2.8 / 0.74 7.0 / 1.85 7.0 / 1.85 10.3 / 2.72 9.3 / 2.46 14.5 / 3.83 9.5 / 2.51 14.8 / 3.91 

Z.18 0.20 / 0.05 0.20 / 0.05 0.35 / 0.09 0.30 / 0.08 0.40 / 0.11 0.50 / 0.13 0.50 / 0.13 0.50 / 0.13 0.50 / 0.13 

Z.28 0.25 / 0.07 0.25 / 0.07 0.45 / 0.12 0.40 / 0.11 0.60 / 0.16 0.60 / 0.16 0.70 / 0.18 0.60 / 0.16 0.70 / 0.18 

Z.38 0.50 / 0.13 0.50 / 0.13 0.60 / 0.16 0.60 / 0.16 0.60 / 0.16 0.80 / 0.21 1.00 / 0.26 0.70 / 0.18 1.1 / 0.29 

Z.48 1.1 / 0.29 1.00 / 0.26 1.6 / 0.42 1.3 / 0.34 1.5 / 0.4 1.8 / 0.48 2.4 / 0.63 1.9 / 0.5 2.4 / 0.63 

Z.68 1.8 / 0.48 1.7 / 0.45 2.7 / 0.71 2.3 / 0.61 2.5 / 0.66 3.0 / 0.79 4.1 / 1.08 3.2 / 0.85 4.1 / 1.08 

Z.88 4.1 / 1.08 3.7 / 0.98 6.1 / 1.61 5.3 / 1.4 5.7 / 1.51 6.8 / 1.8 8.3 / 2.19 7.5 / 1.98 8.8 / 2.32 

Z.108 7.3 / 1.93 6.0 / 1.59 10.5 / 2.77 9.3 / 2.46 8.6 / 2.27 13.8 / 3.65 14.0 / 3.7 13.2 / 3.49 13.6 / 3.59 

Z.128 9.5 / 2.51 7.0 / 1.85 16.0 / 4.23 14.1 / 3.72 13.2 / 3.49 18.5 / 4.89 22.1 / 5.84 19.9 / 5.26 22.3 / 5.89 

Z.148 13.0 / 3.43 9.9 / 2.62 20.8 / 5.49 18.3 / 4.83 26.9 / 7.11 23.9 / 6.31 27.7 / 7.32 25.7 / 6.79 27.4 / 7.24 

Z.168 21.0 / 5.55 15.3 / 4.04 34.8 / 9.19 30.1 / 7.95 32.1 / 8.48 48.0 / 12.68 31.1 / 8.22 48.0 / 12.68 41.7 / 11.02 

Z.188 18.5 / 4.89 18.5 / 4.89 50.0 / 13.21 46.0 / 12.15 75.0 / 19.81 72.0 / 19.02 70.0 / 18.49 72.0 / 19.02 70.0 / 18.49 

D.18 0.20 / 0.05 0.20 / 0.05 0.35 / 0.09 0.30 / 0.08 0.40 / 0.11 0.50 / 0.13 0.50 / 0.13 0.50 / 0.13 0.50 / 0.13 

D.28 0.25 / 0.07 0.25 / 0.07 0.45 / 0.12 0.40 / 0.11 0.60 / 0.16 0.60 / 0.16 0.70 / 0.18 0.60 / 0.16 0.70 / 0.18 

D.38 0.50 / 0.13 0.50 / 0.13 0.60 / 0.16 0.60 / 0.16 0.60 / 0.16 0.90 / 0.24 1.1 / 0.29 0.90 / 0.24 1.1 / 0.29 

D.48 1.1 / 0.29 1.00 / 0.26 1.5 / 0.4 1.4 / 0.37 1.5 / 0.4 2.3 / 0.61 2.4 / 0.63 2.4 / 0.63 2.4 / 0.63 

D.68 1.7 / 0.45 1.6 / 0.42 2.6 / 0.69 2.4 / 0.63 2.6 / 0.69 3.9 / 1.03 4.0 / 1.06 4.0 / 1.06 4.0 / 1.06 

D.88 4.0 / 1.06 3.6 / 0.95 5.9 / 1.56 5.4 / 1.43 5.9 / 1.56 8.7 / 2.3 8.9 / 2.35 9.3 / 2.46 8.9 / 2.35 

D.108 7.1 / 1.88 5.7 / 1.51 10.3 / 2.72 9.5 / 2.51 10.0 / 2.64 16.3 / 4.31 14.2 / 3.75 15.6 / 4.12 13.7 / 3.62 

D.128 9.4 / 2.48 6.8 / 1.8 15.8 / 4.17 14.8 / 3.91 14.1 / 3.72 24.6 / 6.5 21.8 / 5.76 24.4 / 6.45 21.5 / 5.68 

D.148 12.5 / 3.3 9.4 / 2.48 20.4 / 5.39 19.1 / 5.05 23.4 / 6.18 30.6 / 8.08 28.2 / 7.45 32.2 / 8.51 27.9 / 7.37 

D.168 19.0 / 5.02 16.0 / 4.23 34.1 / 9.01 31.2 / 8.24 33.8 / 8.93 53.0 / 14 43.7 / 11.54 54.4 / 14.37 42.2 / 11.15 

D.188 18.4 / 4.86 18.4 / 4.86 48.0 / 12.68 46.0 / 12.15 73.0 / 19.29 

On tandem gear units the gear unit is provided with the oil quantity in paranthesis. 

69.0 / 18.23 

(83.0 / 21.93) 

68.0 / 17.96 69.0 / 18.23 

(83.0 / 21.93) 

68.0 / 17.96 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Bevel Helical Gear Motors and Gear Units 


4 - 1


4 - 2 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 









Torque table for type of input unit K., A, P 4 - 47 


Detail of flange 4 - 69 

Pinhole 4 - 70 

Cover B-Side 4 - 71 



Bevel Helical Gear Units flange mounted for Mixer/Agitator 4 - 214 

Bevel Helical Gear Units with Backstop 4 - 218 

Mounting Positions 4 - 219 

Lubrication, Oil Quantities 4 - 223 

4 - 3


Helical Bevel Gear Units 


MOTOX helical bevel gear units are part of the MOTOX modular system which essentially comprises helical, helical bevel, parallel 

shaft, helical worm gear units or mechanical variable speed drives. With three or single phase AC motors with or without brake, all 

imaginable drive combinations up to electronic variable speed drives are possible. 

MOTOX helical bevel gear units are designed for continuous operation. 



The gears of the helical stages are hobbed, case hardened and profile ground or honed. Additionally, gear teeth are profile corrected 

and crowned for optimum performance. 

The bevel stage for the standard program is hobbed, case hardened and lapped. 

Helical gearing provides for optimum quiet operation. The positioning of the bevel gear stage as the second stage has positive effects 

on the noise behaviour. 


Helical gears have a hardness of 58-62 R c . 

The output and input shafts are in right-angle position. 



The standard unit is available in foot, face, flange or shaft mounted versions for use in all mounting positions. The gear units are 

manufactured with a solid shaft or with a hollow shaft ( fitted key or shrink disc ). 

Integrally mounted C-Face adapters, either in the clamp collar style (K5TC) or the elastic coupling style (KTC) , are available for 

NEMA motors. 




standard features, ambient temperature of 20°C (68°F), and standard lubricant. 

The actual output speeds and torques may vary slightly from the figures in this catalogue due to motor variations, supply voltage, or 


Efficiency 

The efficiency of helical bevel gearing is determined by gearing and bearing friction and splash losses, and is approximately 94%. 

4 - 4 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Standards 

The important dimensions correspond to the DIN standards, namely : 













is placed. 






4 - 5



Gear Units Example: K F X 108 - Z 38 - K5TC (56) 

Type 

Design 

Backstop 

Size 



Input unit 


Type of gear unit 

B Bevel Helical Gear Unit 2-stage 

K Bevel Helical Gear Unit 3-stage 

Stages 

(-) without determination 

Design 

Shaft 


A Hollow shaft 

Fixing 

(-) Foot-mounted 



D Torque arm 

G Flange (A-type) on opposite side of output shaft 

M Mixer/Agitator 

E Extruder 

Connection 

(-) Parallel key 

S Hollow shaft with shrink disc 

T Splined hollow shaft 

Backstop 

X Backstop in intermediate shaft 



Stages 

Z 2-stages 

D 3-stages 

Type of input unit 

K4 Extended housing with shank assembly for IEC flange 

mounted motors 

K2 Extended housing with elastic coupling for IEC flange 

mounted motor 

A Input flange with free input shaft (metric) 

P Design piggy back for IEC motors 

K5TC Adapter with clamp collar for NEMA C-face motors 

KTC Adapter 3 Piece Coupled for NEMA C-face mounted 

motors 

A5 Input flange with free input shaft (imperial) 

P5 Design piggy back for NEMA motors 

PS Input unit with free input shaft/ piggy back protection cover 

4 - 6 

Motors 

Type 

Size 




Types of motors 

LA, LG 


Example: LA 100L 4/2 F - L16 NH 

LAI, LGI 






W Canopy 


IR Resolver 


D Handwheel 

Mounted unit 

L, KFB 

Spring-operated single disk brake, DC excited 







M Microswitch 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 














T 2 

d 0 

F exist 

= 

T2 ⋅ 2 

------------- 

d 0 





Fxperm 4 - 7


Permissible overhung loads for bevel helical gear units at Service Factor 1.0 



4 - 8 

F xperm2 

F xperm1 

øU 


x V x V/2 0 







- value 




Note: 

The listed radial forces refer to worst case setup (BF/KF). All setups can be calculated with the MOTOX Electronic Configurator (CD). 

For high or rotating radial load mixer and agitator drives have to be used. 

F 

F xperm 

0 

y 

= FRperm ⋅ ------------ Ibf][ 

z+ x 

a ⋅ 1000 

= -------------------- Ibf][ 

x 

> = 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Typ(e) y 

[in.] 

z 

[in.] 

a 

[lb in] 

U 

[in.] 

V 

[in.] 

BF28 5.43 4.65 0.48 3/4 1.57 

BF38 6.61 5.63 1.13 1 1.97 

KF38 5.75 4.76 1.22 1 1.97 

KF48 6.93 5.75 2.20 1 1/4 2.36 

KF68 8.39 6.81 3.45 1 5/8 3.15 

KF88 10.31 8.35 6.48 2 3.94 

KF108 11.73 9.37 12.17 2 3/8 4.72 

KF128 14.63 11.87 19.90 2 7/8 5.51 

KF148 17.09 13.74 25.41 3 5/8 6.69 

KF168 20.37 16.24 52.18 4 3/8 8.27 


Typ(e) y 

[in.] 

z 

[in.] 

a 

[lb in] 

U 

[in.] 

V 

[in.] 

KF68 8.39 6.81 4.97 1 5/8 3.15 

KF88 10.31 8.35 9.53 2 3.94 

KF108 11.73 9.37 16.88 2 3/8 4.72 

KF128 14.63 11.87 28.92 2 7/8 5.51 

KF148 17.09 13.74 42.58 3 5/8 6.69 

KF168 20.37 16.24 73.85 4 3/8 8.27 

KF188 23.54 19.41 77.39 4 3/4 8.27 




∗ 

≤ 16 

[rpm] 



≤ 25 

[rpm] 

≤ 40 

[rpm] 

≤ 63 

[rpm] 

≤ 100 

[rpm] 

≤ 160 

[rpm] 

≤ 250 

[rpm] 

≤ 400 

[rpm] 

ccw - - 608 608 608 592 608 592 

cw - - 608 608 608 608 608 608 

ccw - - 1098 887 736 664 736 664 

cw - - 1142 1051 891 806 891 806 

ccw 1244 1244 979 790 711 608 711 608 

cw 1244 1244 1044 855 761 653 761 653 

ccw 1864 1755 1384 1103 918 889 918 889 

cw 1864 1852 1481 1199 1015 934 1015 934 

ccw 2135 1787 1359 997 756 691 756 691 

cw 2190 1913 1485 1123 882 817 882 817 

ccw 3110 2545 2021 1422 1154 1197 1154 1197 

cw 3291 2788 2261 1663 1384 1400 1384 1400 

ccw 4545 3535 2806 2313 1946 1688 1946 1688 

cw 4959 3949 3220 2727 2311 1881 2311 1881 

ccw 6476 5272 4295 3382 2633 2522 2633 2522 

cw 6946 5742 4763 3850 3103 2792 3103 2792 

ccw 6136 4923 3839 2876 2599 2972 2599 2972 

cw 6725 5510 4428 2585 1883 3276 1883 3276 

ccw 9365 7632 5569 4160 4230 4057 4230 4057 

cw 10062 8330 6264 3951 4840 4356 4840 4356 

∗ 

≤ 16 

[rpm] 


≤ 25 

[rpm] 

≤ 40 

[rpm] 

≤ 63 

[rpm] 

≤ 100 

[rpm] 

≤ 160 

[rpm] 

≤ 250 

[rpm] 

≤ 400 

[rpm] 

ccw 3156 3156 3156 3156 3112 2826 3112 2826 

cw 3156 3156 3156 3156 3156 2925 3156 2925 

ccw 4838 4838 4838 4838 4838 4628 4838 4628 

cw 4838 4838 4838 4838 4838 4766 4838 4766 

ccw 7155 7155 7155 7155 7027 6005 7027 6005 

cw 7155 7155 7155 7155 7155 6206 7155 6206 

ccw 10500 10500 10500 10500 10500 9909 10500 9909 

cw 10500 10500 10500 10500 10500 10190 10500 10190 

ccw 11741 11741 11741 11741 11741 11252 11741 11252 

cw 11741 11741 11741 11741 11741 11547 11741 11547 

ccw 16709 16709 16709 16709 16709 16470 16709 16470 

cw 16709 16709 16709 16709 16709 16709 16709 16709 

ccw 18719 18719 18719 18719 18719 18719 18719 18719 

cw 18719 18719 18719 18719 18719 18719 18719 18719 

4 - 9




P Motor 

4 - 10 





n 2 

T 2 

T 1 








Prefered list 


(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




PMotor [hp] 

n2 (60 Hz) 

[rpm] 

T2 [lb in] 

SF 

[-] 

Ratio 

[-] 

Gear Motor 

0,25 (60 Hz) 0.06 188400 0.94 27817 K.188-D68-LA71C4 

0.06 204099 0.87 30135 

0.07 163815 1.08 24187 

0.08 148738 1.19 21961 

0.09 124607 1.42 18398 

0.08 135809 1.30 20052 

0.10 114806 1.54 16951 

0.11 104261 1.70 15394 

0.12 94982 1.86 14024 

0.13 87011 2.03 12847 

0.08 144288 0.83 21304 K.168-D48-LA71C4 

0.09 130872 0.91 19323 

0.10 109056 1.10 16102 

0.10 119236 1.00 17605 

0.12 97509 1.23 14397 

0.11 102793 1.16 14767 K.168-Z48-LA71C4 

0.13 90966 1.31 13068 

0.14 82696 1.44 11880 

0.16 74294 1.61 10673 

0.18 63679 1.88 9148 

0.13 90611 0.78 13017 K.148-D38-LA71C4 

0.14 83594 0.85 12009 K.148-Z38-LA71C4 

0.16 72519 0.98 10418 

0.17 67758 1.04 9734 

0.20 59593 1.19 8561 

0.22 52193 1.36 7498 

0.25 46165 1.53 6632 

0.28 41835 1.69 6010 

0.32 36928 1.92 5305 

0.23 50370 0.83 7236 K.128-Z38-LA71C4 

0.26 44550 0.94 6400 

0.29 40374 1.04 5800 

0.33 35640 1.17 5120 

0.36 32153 1.30 4619 

0.40 29160 1.44 4189 

0.44 26570 1.58 3817 

0.48 24301 1.72 3491 

0.54 21725 1.93 3121 

0.38 30329 0.88 4357 K.108-Z38-LA71C4 

0.42 27635 0.96 3970 

0.46 25275 1.05 3631 

0.52 22602 1.17 3247 

0.56 20751 1.28 2981 

0.62 18704 1.42 2687 

0.72 16087 1.65 2311 

0.81 14340 1.85 2060 

0.89 13170 2.02 1892 

0.69 16887 0.86 2426 K.88-Z28-LA71C4 

0.79 14848 0.98 2133 

0.87 13407 1.09 1926 

1.0 11687 1.25 1679 

1.1 10497 1.39 1508 

4 - 11




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0,25 (60 Hz) 1.2 9474 1.54 1361 K.88-Z28-LA71C4 

1.4 8590 1.70 1234 

1.5 7817 1.87 1123 

1.4 8465 0.86 1216 K.68-Z28-LA71C4 

1.5 7643 0.95 1098 

1.7 6933 1.05 996 

1.8 6307 1.15 906 

2.1 5576 1.30 801 

2.3 5151 1.41 740 

2.6 4434 1.64 637 

2.9 4030 1.80 579 

3.2 3661 1.98 526 

2.3 4991 0.80 717 K.48-Z28-LA71C4 

2.6 4532 0.88 651 

2.8 4121 0.97 592 

3.2 3641 1.09 523 

3.5 3362 1.18 483 

4.0 2896 1.37 416 

4.4 2631 1.51 378 

4.9 2395 1.66 344 

5.4 2172 1.83 312 

5.9 1977 2.01 284 

4.4 2631 0.84 378 K.38-Z28-LA71C4 

4.9 2395 0.92 344 

5.4 2172 1.02 312 

5.9 1977 1.12 284 

6.7 1747 1.27 251 

7.3 1608 1.38 231 

8.4 1385 1.60 199 

9.3 1260 1.76 181 

9.4 1584 1.40 179.13 K.38-LA71C4 

10.5 1406 1.57 159.04 

12.0 1233 1.79 139.43 

13.4 1103 2.00 124.78 

15.1 979 2.26 110.75 

29 517 2.23 57.53 B.28-LA71C4 

35 436 2.64 48.51 

39 387 2.97 43.07 

44 339 3.39 37.76 

50 304 3.79 33.79 

56 269 4.27 29.99 

64 236 4.87 26.28 

72 208 5.54 23.11 

80 187 6.13 20.87 

92 163 7.04 18.19 

103 147 7.83 16.34 

114 133 8.68 14.75 

125 120 9.57 13.38 

138 109 10.52 12.17 

156 97 11.90 10.76 

169 89 12.68 9.94 

196 77 13.91 8.56 

215 70 14.81 7.78 

224 67 11.83 7.49 

248 61 13.11 6.76 

4 - 12 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0,25 (60 Hz) 273 55 14.45 6.13 B.28-LA71C4 

0,33 (60 Hz) 0.08 205392 0.86 20052 K.188-D68-LA71S4 

0.08 224946 0.79 21961 

0.09 188450 0.94 18398 

0.10 173629 1.02 16951 

0.11 157680 1.12 15394 

0.12 143648 1.23 14024 

0.13 131592 1.34 12847 

0.15 117415 1.51 11463 

0.18 94246 1.88 9201 K.188-Z68-LA71S4 

0.12 147468 0.81 14397 K.168-D48-LA71S4 

0.13 133855 0.89 13068 K.168-Z48-LA71S4 

0.14 121687 0.98 11880 

0.16 109323 1.09 10673 

0.18 93703 1.27 9148 

0.20 84781 1.41 8277 

0.22 78256 1.53 7640 

0.25 68044 1.76 6643 

0.28 61786 1.93 6032 

0.19 87690 0.81 8561 K.148-Z38-LA71S4 

0.22 76802 0.92 7498 

0.25 67931 1.04 6632 

0.28 61560 1.15 6010 

0.31 54339 1.30 5305 

0.35 49023 1.44 4786 

0.38 44465 1.59 4341 

0.42 40511 1.75 3955 

0.46 37049 1.91 3617 

0.36 47312 0.88 4619 K.128-Z38-LA71S4 

0.40 42908 0.98 4189 

0.44 39097 1.07 3817 

0.48 35758 1.17 3491 

0.53 31968 1.31 3121 

0.58 29356 1.43 2866 

0.64 26458 1.58 2583 

0.75 22750 1.84 2221 

0.84 20291 2.06 1981 

0.51 33259 0.80 3247 K.108-Z38-LA71S4 

0.56 30534 0.87 2981 

0.62 27523 0.96 2687 

0.72 23672 1.12 2311 

0.81 21101 1.26 2060 

0.88 19380 1.37 1892 

0.98 17464 1.52 1705 

1.1 15016 1.77 1466 

1.2 13756 1.93 1343 K.108-Z48-LA71S4 

0.99 17198 0.85 1679 K.88-Z28-LA71S4 

1.1 15446 0.95 1508 

1.2 13941 1.05 1361 

1.3 12640 1.15 1234 

1.5 11503 1.27 1123 

1.7 10171 1.44 993 

1.8 9393 1.55 917 

2.1 8082 1.81 789 

2.3 7354 1.99 718 

4 - 13




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0,33 (60 Hz) 2.1 8205 0.88 801 K.68-Z28-LA71S4 

2.3 7580 0.96 740 

2.6 6525 1.11 637 

2.9 5931 1.22 579 

3.2 5388 1.35 526 

3.5 4886 1.48 477 

3.8 4445 1.63 434 

4.3 3933 1.84 384 

4.7 3626 2.00 354 

3.4 4947 0.80 483 K.48-Z28-LA71S4 

4.0 4261 0.93 416 

4.4 3872 1.03 378 

4.8 3524 1.13 344 

5.3 3196 1.25 312 

5.9 2909 1.37 284 

6.6 2571 1.55 251 

7.2 2376 1.68 232 

8.4 2038 1.95 199 

9.2 1854 2.15 181 

9.8 1991 2.00 169.53 K.48-LA71S4 

11.0 1770 2.25 150.76 

6.6 2571 0.86 251 K.38-Z28-LA71S4 

7.2 2366 0.93 231 

8.4 2038 1.09 199 

9.2 1854 1.19 181 

9.3 2103 1.05 179.13 K.38-LA71S4 

10.5 1867 1.18 159.04 

11.9 1637 1.35 139.43 

13.3 1465 1.51 124.78 

15.0 1300 1.70 110.75 

17.2 1140 1.94 97.05 

19.5 1002 2.21 85.33 

22 905 2.44 77.09 

29 686 1.68 57.53 B.28-LA71S4 

34 579 1.99 48.51 

39 514 2.24 43.07 

44 450 2.55 37.76 

49 403 2.85 33.79 

56 358 3.21 29.99 

63 314 3.67 26.28 

72 276 4.17 23.11 

80 249 4.62 20.87 

92 217 5.30 18.19 

102 195 5.90 16.34 

113 176 6.54 14.75 

124 160 7.20 13.38 

137 145 7.92 12.17 

155 128 8.96 10.76 

168 119 9.55 9.94 

195 102 10.48 8.56 

214 93 11.15 7.78 

222 89 8.91 7.49 

246 81 9.87 6.76 

272 73 10.89 6.13 

298 67 11.96 5.58 

4 - 14 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0,33 (60 Hz) 337 59 13.51 4.94 B.28-LA71S4 

365 54 14.14 4.56 

425 47 15.50 3.92 

0,5 (60 Hz) 0.12 215705 0.82 14024 K.188-D68-LA71M4 

0.13 197601 0.90 12847 

0.15 176314 1.00 11463 

0.18 146699 1.21 9201 K.188-Z68-LA71M4 

0.21 128300 1.38 8047 

0.23 115178 1.54 7224 

0.25 105197 1.68 6598 

0.29 93351 1.90 5855 

0.18 145854 0.82 9148 K.168-Z48-LA71M4 

0.20 131967 0.91 8277 

0.22 121811 0.98 7640 

0.25 105915 1.13 6643 

0.28 96173 1.24 6032 

0.31 87803 1.36 5507 

0.33 80564 1.48 5053 

0.36 74234 1.61 4656 

0.40 67410 1.77 4228 

0.44 61416 1.94 3852 

0.32 84582 0.84 5305 K.148-Z38-LA71M4 

0.35 76307 0.93 4786 

0.39 69212 1.02 4341 

0.42 63058 1.12 3955 

0.46 57669 1.23 3617 

0.52 51562 1.37 3234 

0.57 47353 1.49 2970 

0.63 42682 1.66 2677 

0.73 36703 1.93 2302 

0.54 49761 0.84 3121 K.128-Z38-LA71M4 

0.59 45695 0.92 2866 

0.65 41183 1.02 2583 

0.76 35411 1.18 2221 

0.85 31585 1.33 1981 

0.92 29002 1.44 1819 

1.0 26132 1.60 1639 

1.2 22481 1.86 1410 

1.2 22321 1.88 1400 K.128-Z48-LA71M4 

1.3 20472 2.04 1284 

0.8 32844 0.81 2060 K.108-Z38-LA71M4 

0.9 30166 0.88 1892 

1.0 27184 0.98 1705 

1.1 23374 1.14 1466 

1.3 21413 1.24 1343 K.108-Z48-LA71M4 

1.4 19659 1.35 1233 

1.5 18112 1.47 1136 

1.6 16438 1.61 1031 

1.8 14987 1.77 940 

2.0 13728 1.93 861 

1.5 17905 0.82 1123 K.88-Z28-LA71M4 

1.7 15832 0.92 993 

1.8 14620 1.00 917 

2.1 12580 1.16 789 

2.3 11448 1.28 718 

4 - 15




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0,5 (60 Hz) 2.6 10395 1.40 652 K.88-Z28-LA71M4 

2.8 9423 1.55 591 

3.1 8578 1.70 538 

3.5 7589 1.92 476 

3.2 8386 0.87 526 K.68-Z28-LA71M4 

3.5 7605 0.95 477 

3.9 6920 1.05 434 

4.4 6122 1.18 384 

4.7 5644 1.29 354 

5.5 4863 1.49 305 

6.1 4416 1.64 277 

6.9 4297 1.69 243,72 K.68-LA71M4 

7.8 3803 1.91 215,68 

8.6 3457 2.10 196,07 

5.4 4974 0.80 312 K.48-Z28-LA71M4 

5.9 4528 0.88 284 

6.7 4002 0.99 251 

7.2 3699 1.08 232 

8.4 3173 1.25 199 

9.3 2886 1.38 181 

9.9 2989 1.33 169.53 K.48-LA71M4 

11.1 2658 1.50 150.76 

12.8 2306 1.73 130.78 

13.7 2154 1.85 122.19 

15.6 1895 2.10 107.47 

17.8 1660 2.40 94.12 

12.0 2458 0.90 139.43 K.38-LA71M4 

13.5 2200 1.01 124.78 

15.2 1953 1.13 110.75 

17.3 1711 1.29 97.05 

19.7 1505 1.47 85.33 

22 1359 1.63 77.09 

25 1185 1.87 67.18 

28 1064 2.08 60.33 

31 960 2.30 54.47 

34 871 2.54 49.38 

26 1177 1.50 65.69 B.38-LA71M4 

29 1022 2.16 57.04 

33 909 2.43 50.72 

29 1031 1.12 57.53 B.28-LA71M4 

35 869 1.32 48.51 

39 772 1.49 43.07 

44 676 1.70 37.76 

50 605 1.90 33.79 

56 537 2.14 29.99 

64 471 2.44 26.28 

73 414 2.78 23.11 

80 374 3.08 20.87 

92 326 3.53 18.19 

0,75 (60 Hz) 0.21 195747 0.90 8047 K.188-Z68-LA80S4 

0.24 175727 1.01 7224 

0.26 160499 1.10 6598 

0.29 142425 1.24 5855 

0.32 131479 1.35 5405 

0.35 118927 1.49 4889 

4 - 16 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0,75 (60 Hz) 0.38 105780 1.67 4502 K.188-Z68-LA80S4 

0.41 97815 1.81 4163 

0.44 90813 1.95 3865 

0.28 141729 0.84 6032 K.168-Z48-LA80S4 

0.31 129393 0.92 5507 

0.34 118726 1.01 5053 

0.37 109398 1.09 4656 

0.40 99342 1.20 4228 

0.44 90507 1.32 3852 

0.48 82894 1.44 3528 

0.54 73966 1.61 3148 

0.47 84986 0.83 3617 K.148-Z38-LA80S4 

0.53 75987 0.93 3234 

0.58 69784 1.01 2970 

0.64 62899 1.13 2677 

0.74 54088 1.31 2302 

0.83 48238 1.47 2053 

0.91 44290 1.60 1885 

1.0 39920 1.77 1699 

1.2 34328 2.06 1461 

0.86 46546 0.90 1981 K.128-Z38-LA80S4 

0.94 42740 0.98 1819 

1.0 38510 1.09 1639 

1.2 33130 1.26 1410 

1.2 32895 1.27 1400 K.128-Z48-LA80S4 

1.3 30169 1.39 1284 

1.4 27796 1.51 1183 

1.6 25235 1.66 1074 

1.7 23003 1.82 979 

1.9 21076 1.99 897 

1.3 31555 0.84 1343 K.108-Z48-LA80S4 

1.4 28971 0.92 1233 

1.5 26692 0.99 1136 

1.7 24225 1.10 1031 

1.8 22086 1.20 940 

2.0 20230 1.31 861 

2.2 18045 1.47 768 

2.3 17171 0.85 718 K.88-Z28-LA71ZMP4 

2.6 15593 0.94 652 

2.8 14134 1.03 591 

3.1 12867 1.13 538 

3.5 11384 1.28 476 

3.8 10499 1.39 439 

4.4 9040 1.61 378 

4.9 8227 1.77 344 

5.6 7865 1.73 302.68 K.88-LA80S4 

6.3 7092 2.06 272.95 

4.8 8318 0.87 354 K.68-Z28-LA71ZMP4 

5.6 7166 1.01 305 

6.2 6508 1.11 277 

7.0 6333 1.15 243.72 K.68-LA80S4 

7.9 5604 1.29 215.68 

8.7 5095 1.42 196.07 

9.7 4577 1.59 176.14 

11.3 3923 1.85 150.98 

4 - 17




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0,75 (60 Hz) 12.5 3549 2.04 136.6 K.68-LA80S4 

13.6 3276 2.21 126.09 

8.4 4759 0.84 199 K.48-Z28-LA71ZMP4 

9.3 4329 0.92 181 

10.1 4405 0.90 169.53 K.48-LA80S4 

11.3 3917 1.02 150.76 

13.1 3398 1.17 130.78 

14.0 3175 1.25 122.19 

15.9 2792 1.43 107.47 

18.2 2446 1.63 94.12 

21 2163 1.84 83.25 

23 1960 2.03 75.45 

26 1731 2.30 66.6 

28 1561 2.55 60.08 

18 2522 0.88 97.05 K.38-LA80S4 

20 2217 1.00 85.33 

22 2003 1.10 77.09 

25 1746 1.27 67.18 

28 1568 1.41 60.33 

31 1415 1.56 54.47 

35 1283 1.72 49.38 

38 1168 1.89 44.94 

43 1032 2.14 39.73 

47 953 2.32 36.69 

54 821 2.69 31.59 

60 746 2.96 28.72 

64 699 2.73 26.9 

71 628 2.95 24.16 

78 567 3.17 21.81 

86 514 3.39 19.78 

95 467 3.61 17.99 

26 1734 1.02 65.69 B.38-LAI80S4 

30 1506 1.47 57.04 

34 1339 1.65 50.72 

39 1162 1.90 44 

42 1085 2.04 41.11 

47 955 2.32 36.16 

54 836 2.65 31.67 

61 739 2.99 28.01 

35 1303 0.88 48.51 B.28-LA71ZMP4 

39 1157 0.99 43.07 

44 1015 1.13 37.76 

50 908 1.27 33.79 

56 806 1.43 29.99 

64 706 1.63 26.28 

73 621 1.85 23.11 

80 561 2.05 20.87 

92 489 2.35 18.19 

103 439 2.62 16.34 

114 396 2.90 14.75 

126 360 3.20 13.38 

138 327 3.52 12.17 

156 289 3.98 10.76 

169 267 4.24 9.94 

224 201 5.32 7.49 

4 - 18 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0,75 (60 Hz) 249 182 5.70 6.76 B.28-LA71ZMP4 

274 165 4.83 6.13 

1 (60 Hz) 0.26 213999 0.83 6598 K.188-Z68-LA80M4 

0.29 189901 0.93 5855 

0.32 175305 1.01 5405 

0.35 158569 1.12 4889 

0.38 146017 1.21 4502 

0.41 135022 1.31 4163 

0.44 125357 1.41 3865 

0.50 110600 1.60 3410 

0.54 102102 1.73 3148 

0.61 91496 1.93 2821 

0.66 84361 2.10 2601 

0.40 137131 0.87 4228 K.168-Z48-LA80M4 

0.44 124935 0.96 3852 

0.48 114427 1.04 3528 

0.54 102102 1.17 3148 

0.61 91139 1.31 2810 

0.72 77387 1.54 2386 

0.86 64414 1.85 1986 

0.87 63408 1.88 1955 

0.74 74663 0.95 2302 K.148-Z38-LA80M4 

0.83 66587 1.06 2053 

0.91 61138 1.16 1885 

1.0 55105 1.28 1699 

1.2 47386 1.49 1461 

1.2 45148 1.57 1392 K.148-Z68-LA80M4 

1.4 40445 1.75 1247 

1.5 37299 1.90 1150 

1.2 45732 0.92 1410 K.128-Z38-LA80M4 

1.2 45407 0.92 1400 K.128-Z48-LA80M4 

1.3 41645 1.01 1284 

1.4 38369 1.09 1183 

1.6 34834 1.20 1074 

1.7 31753 1.32 979 

1.9 29093 1.44 897 

2.1 25947 1.61 800 

2.4 23158 1.81 714 

1.8 30488 0.87 940 K.108-Z48-LA80M4 

2.0 27926 0.95 861 

2.2 24909 1.07 768 

2.5 22217 1.19 685 

2.9 18877 1.41 582 

3.5 15730 1.69 485 

3.6 15471 1.72 477 

4.0 13817 1.92 426 

3.0 18250 0.80 538 K.88-Z28-LA71ZMD4 

3.4 16147 0.90 476 

3.7 14892 0.98 439 

4.3 12822 1.14 378 

4.8 11669 1.25 344 

5.6 10486 1.30 302.68 K.88-LA80M4 

6.3 9456 1.54 272.95 

6.9 8527 1.71 246.13 

7.9 7457 1.96 215.25 

4 - 19




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

1 (60 Hz) 8.8 6695 2.18 193.24 K.88-LA80M4 

7.0 8444 0.86 243.72 K.68-LA80M4 

7.9 7472 0.97 215.68 

8.7 6793 1.07 196.07 

9.7 6102 1.19 176.14 

11.3 5231 1.39 150.98 

12.5 4733 1.53 136.6 

13.6 4368 1.66 126.09 

15.6 3799 1.91 109.64 

17.2 3449 2.10 99.55 

18.8 3149 2.30 90.89 

20.5 2889 2.51 83.4 

13.1 4531 0.88 130.78 K.48-LA80M4 

14.0 4233 0.94 122.19 

15.9 3723 1.07 107.47 

18.2 3261 1.22 94.12 

21 2884 1.38 83.25 

23 2614 1.52 75.45 

26 2307 1.73 66.6 

28 2081 1.91 60.08 

31 1888 2.11 54.49 

34 1720 2.31 49.65 

38 1573 2.53 45.41 

42 1407 2.83 40.6 

25 2327 0.95 67.18 K.38-LA80M4 

28 2090 1.06 60.33 

31 1887 1.17 54.47 

35 1711 1.29 49.38 

38 1557 1.42 44.94 

43 1376 1.61 39.73 

47 1271 1.74 36.69 

54 1094 2.02 31.59 

60 995 2.22 28.72 

64 932 2.05 26.9 

71 837 2.21 24.16 

78 756 2.38 21.81 

86 685 2.54 19.78 

95 623 2.71 17.99 

107 551 2.95 15.91 

116 509 3.13 14.69 

135 438 3.47 12.65 

149 398 3.71 11.5 

160 371 3.79 10.72 

176 337 4.18 9.72 

193 307 4.59 8.85 

30 2008 1.10 57.04 B.38-LA80M4 

34 1785 1.24 50.72 

39 1549 1.43 44 

42 1447 1.53 41.11 

47 1273 1.74 36.16 

54 1115 1.98 31.67 

61 986 2.24 28.01 

67 893 2.48 25.38 

76 789 2.80 22.41 

85 712 3.04 20.22 

4 - 20 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

1 (60 Hz) 93 645 3.25 18.33 B.38-LA80M4 

102 588 3.46 16.7 

112 538 3.70 15.28 

125 481 3.99 13.66 

43 1390 0.83 37.76 B.28-LA71ZMD4 

48 1244 0.92 33.79 

55 1104 1.04 29.99 

62 967 1.19 26.28 

71 851 1.35 23.11 

78 768 1.50 20.87 

90 670 1.72 18.19 

100 602 1.91 16.34 

111 543 2.12 14.75 

122 493 2.33 13.38 

134 448 2.57 12.17 

152 396 2.90 10.76 

164 366 3.09 9.94 

191 315 3.40 8.56 

210 286 3.61 7.78 

218 276 2.89 7.49 

242 249 3.20 6.76 

267 226 3.53 6.13 

293 205 3.88 5.58 

331 182 4.38 4.94 

359 168 4.58 4.56 

417 144 5.02 3.92 

458 131 5.31 3.57 

1,5 (60 Hz) 0.39 213410 0.83 4502 K.188-Z68-LA90SB4E 

0.42 197340 0.90 4163 

0.45 183214 0.97 3865 

0.51 161646 1.09 3410 

0.56 149226 1.19 3148 

0.62 133725 1.32 2821 

0.67 123296 1.44 2601 

0.80 103434 1.71 2182 

0.94 88265 2.00 1862 

0.62 133204 0.90 2810 K.168-Z48-LA90SB4E 

0.74 113105 1.06 2386 

0.88 94143 1.27 1986 

0.90 92674 1.29 1955 

1.0 82719 1.44 1745 

1.2 70252 1.70 1482 

1.4 58448 2.04 1233 

1.0 80538 0.88 1699 K.148-Z38-LA90SB4E 

1.2 69256 1.02 1461 

1.3 65986 1.07 1392 K.148-Z68-LA90SB4E 

1.4 59112 1.20 1247 

1.5 54514 1.30 1150 

1.8 45744 1.55 965 

2.1 39013 1.81 823 

1.8 46408 0.90 979 K.128-Z48-LA90SB4E 

2.0 42521 0.98 897 

2.2 37923 1.10 800 

2.5 33846 1.24 714 

2.9 28726 1.46 606 

4 - 21




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

1,5 (60 Hz) 3.5 23939 1.75 505 K.128-Z48-LA90SB4E 

3.5 23559 1.78 497 

4.0 21000 1.99 443 

3.0 27589 0.96 582 K.108-Z48-LA90SB4E 

3.6 22991 1.15 485 

3.7 22611 1.17 477 

4.1 20194 1.31 426 

4.9 17113 1.55 361 

5.8 14268 1.86 301 

5.7 15557 1.65 307.24 K.108-LA90SB4E 

6.3 14082 1.78 278.1 

7.2 12328 2.15 243.47 

5.1 16307 0.90 344 K.88-Z28-LA90SB4E 

5.8 15326 0.89 302.68 K.88-LA90SB4E 

6.4 13821 1.06 272.95 

7.1 12463 1.17 246.13 

8.2 10899 1.34 215.25 

9.1 9785 1.49 193.24 

9.9 8937 1.63 176.5 

11.2 7931 1.84 156.63 

12.1 7321 1.99 144.58 

13.4 6622 2.20 130.77 

14.6 6098 2.39 120.42 

11.6 7645 0.95 150.98 K.68-LA90SB4E 

12.8 6917 1.05 136.6 

13.9 6385 1.14 126.09 

16.0 5552 1.31 109.64 

17.6 5041 1.44 99.55 

19.3 4602 1.58 90.89 

21 4223 1.72 83.4 

23 3891 1.86 76.84 

25 3533 2.05 69.78 

28 3219 2.25 63.57 

30 2949 2.46 58.23 

34 2631 2.76 51.96 

21 4215 0.94 83.25 K.48-LA90SB4E 

23 3820 1.04 75.45 

26 3372 1.18 66.6 

29 3042 1.31 60.08 

32 2759 1.44 54.49 

35 2514 1.58 49.65 

39 2299 1.73 45.41 

43 2056 1.94 40.6 

47 1888 2.11 37.28 

52 1701 2.34 33.6 

61 1463 2.72 28.9 

64 1395 2.85 27.55 

71 1258 3.16 24.85 

36 2500 0.88 49.38 K.38-LA90SB4E 

39 2276 0.97 44.94 

44 2012 1.10 39.73 

48 1858 1.19 36.69 

56 1600 1.38 31.59 

61 1454 1.52 28.72 

65 1362 1.40 26.9 

4 - 22 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

1,5 (60 Hz) 73 1223 1.51 24.16 K.38-LA90SB4E 

80 1104 1.63 21.81 

89 1002 1.74 19.78 

98 911 1.85 17.99 

110 806 2.02 15.91 

119 744 2.14 14.69 

139 641 2.37 12.65 

153 582 2.54 11.5 

164 543 2.59 10.72 

181 492 2.86 9.72 

198 448 3.14 8.85 

224 396 3.55 7.82 

243 366 3.85 7.22 

282 315 4.27 6.22 

311 286 4.58 5.65 

40 2264 0.98 44 B.38-LA90SB4E 

43 2115 1.05 41.11 

49 1860 1.19 36.16 

55 1629 1.36 31.67 

63 1441 1.54 28.01 

69 1306 1.69 25.38 

78 1153 1.92 22.41 

87 1040 2.08 20.22 

96 943 2.22 18.33 

105 859 2.37 16.7 

115 786 2.53 15.28 

128 703 2.73 13.66 

140 643 3.03 12.5 

159 568 3.47 11.05 

175 515 3.79 10.02 

199 455 4.59 8.84 

67 1352 0.85 26.28 B.28-LA90SB4E 

76 1189 0.97 23.11 

84 1074 1.07 20.87 

96 936 1.23 18.19 

107 841 1.37 16.34 

119 759 1.52 14.75 

131 688 1.67 13.38 

144 626 1.84 12.17 

163 554 2.08 10.76 

177 511 2.21 9.94 

205 440 2.43 8.56 

226 400 2.59 7.78 

234 385 2.07 7.49 

260 348 2.29 6.76 

286 315 2.52 6.13 

315 287 2.77 5.58 

355 254 3.13 4.94 

385 235 3.28 4.56 

448 202 3.60 3.92 

492 184 3.80 3.57 

2 (60 Hz) 0.56 196726 0.90 3148 K.188-Z68-LA90ZLB4E 

0.63 176291 1.00 2821 

0.68 162543 1.09 2601 

0.81 136358 1.30 2182 

4 - 23




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

2 (60 Hz) 0.95 116361 1.52 1862 K.188-Z68-LA90ZLB4E 

1.7 64555 1.85 1033 K.168-Z68-LA90ZLB4E 

2.0 55056 2.17 881 

0.89 124110 0.96 1986 K.168-Z48-LA90ZLB4E 

0.91 122173 0.98 1955 

1.0 109049 1.10 1745 

1.2 92614 1.29 1482 

1.4 77053 1.55 1233 

1.4 77928 0.91 1247 K.148-Z68-LA90ZLB4E 

1.5 71866 0.98 1150 

1.8 60305 1.17 965 

2.2 51431 1.38 823 

2.5 44620 0.94 714 K.128-Z48-LA90ZLB4E 

2.9 37870 1.11 606 

3.5 31559 1.33 505 

3.6 31059 1.35 497 

4.0 27684 1.51 443 

4.7 23560 1.78 377 

5.7 19560 2.14 313 

6.0 19718 2.12 295.38 K.128-LA90ZLB4E 

6.6 18083 2.31 270.9 

3.7 30309 0.88 485 K.108-Z48-LA90ZLB4E 

3.7 29809 0.89 477 

4.2 26622 1.00 426 

4.9 22560 1.18 361 

5.9 18810 1.41 301 

5.8 20509 1.25 307.24 K.108-LA90ZLB4E 

6.4 18564 1.35 278.1 

7.3 16252 1.63 243.47 

8.1 14662 1.81 219.64 

8.8 13425 1.98 201.11 

9.9 11942 2.22 178.9 

10.9 10915 2.43 163.51 

7.2 16430 0.89 246.13 K.88-LA90ZLB4E 

8.2 14369 1.02 215.25 

9.2 12899 1.13 193.24 

10.1 11782 1.24 176.5 

11.3 10456 1.40 156.63 

12.3 9651 1.51 144.58 

13.6 8729 1.67 130.77 

14.7 8038 1.82 120.42 

15.9 7434 1.96 111.37 

17.2 6901 2.12 103.38 

19.5 6089 2.40 91.22 

21 5621 2.60 84.21 

16.2 7319 0.99 109.64 K.68-LA90ZLB4E 

17.8 6645 1.09 99.55 

19.5 6067 1.20 90.89 

21 5567 1.30 83.4 

23 5129 1.41 76.84 

25 4658 1.56 69.78 

28 4244 1.71 63.57 

30 3887 1.87 58.23 

34 3468 2.09 51.96 

38 3095 2.34 46.37 

4 - 24 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

2 (60 Hz) 45 2629 2.76 39.39 K.68-LA90ZLB4E 

27 4446 0.90 66.6 K.48-LA90ZLB4E 

30 4011 0.99 60.08 

33 3637 1.09 54.49 

36 3314 1.20 49.65 

39 3031 1.31 45.41 

44 2710 1.47 40.6 

48 2489 1.60 37.28 

53 2243 1.77 33.6 

61 1929 2.06 28.9 

64 1839 2.16 27.55 

71 1659 2.40 24.85 

79 1505 2.65 22.54 

86 1371 2.90 20.54 

95 1254 3.18 18.78 

106 1121 3.55 16.79 

115 1029 3.87 15.42 

156 758 5.14 11.35 

175 678 5.48 10.15 

190 622 4.14 9.32 

211 561 4.48 8.4 

246 482 5.08 7.22 

48 2449 0.90 36.69 K.38-LA90ZLB4E 

56 2109 1.05 31.59 

62 1917 1.15 28.72 

66 1796 1.06 26.9 

73 1613 1.15 24.16 

81 1456 1.23 21.81 

90 1320 1.32 19.78 

99 1201 1.41 17.99 

112 1062 1.53 15.91 

121 981 1.62 14.69 

140 844 1.80 12.65 

154 768 1.92 11.5 

166 716 1.96 10.72 

183 649 2.17 9.72 

201 591 2.38 8.85 

227 522 2.69 7.82 

246 482 2.92 7.22 

285 415 3.24 6.22 

314 377 3.47 5.65 

49 2452 0.90 36.16 B.38-LA90ZLB4E 

56 2148 1.03 31.67 

63 1900 1.16 28.01 

70 1721 1.29 25.38 

79 1520 1.46 22.41 

88 1371 1.58 20.22 

97 1243 1.69 18.33 

106 1133 1.80 16.7 

116 1036 1.92 15.28 

130 926 2.07 13.66 

142 848 2.30 12.5 

161 749 2.63 11.05 

177 680 2.88 10.02 

201 600 3.48 8.84 

4 - 25




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

2 (60 Hz) 222 541 3.86 7.98 B.38-LA90ZLB4E 

245 491 4.25 7.24 

269 447 4.67 6.59 

294 409 5.08 6.03 

329 366 5.10 5.39 

98 1234 0.93 18.19 B.28-LA90ZLB4E 

109 1108 1.04 16.34 

120 1000 1.15 14.75 

133 907 1.27 13.38 

146 825 1.39 12.17 

165 730 1.58 10.76 

179 674 1.68 9.94 

207 581 1.84 8.56 

228 528 1.96 7.78 

237 508 1.57 7.49 

263 458 1.74 6.76 

290 416 1.91 6.13 

318 378 2.10 5.58 

359 335 2.38 4.94 

389 309 2.49 4.56 

453 266 2.73 3.92 

497 242 2.88 3.57 

3 (60 Hz) 0.80 207460 0.85 2182 K.188-Z68-LA100ZLP4E 

0.94 177035 1.00 1862 

1.1 147466 1.20 1551 

1.4 122270 1.45 1286 

1.5 107913 1.64 1135 

1.8 92035 1.92 968 

1.7 98215 1.22 1033 K.168-Z68-LA100ZLP4E 

2.0 83763 1.43 881 

2.4 69882 1.71 735 

2.9 57902 2.06 609 

1.2 140905 0.85 1482 K.168-Z48-LA100ZLP4E 

1.4 117231 1.02 1233 

2.1 78249 0.90 823 K.148-Z68-LA100ZLP4E 

2.6 65223 1.09 686 

3.1 54099 1.31 569 

3.5 47729 1.48 502 

4.1 40693 1.74 428 

4.9 33943 2.09 357 

5.7 31086 2.28 306.08 K.148-LA100ZLP4E 

3.5 48014 0.87 505 K.128-Z48-LA100ZLP4E 

3.5 47254 0.89 497 

4.0 42119 0.99 443 

4.6 35844 1.17 377 

5.6 29759 1.41 313 

5.9 29999 1.40 295.38 K.128-LA100ZLP4E 

6.5 27513 1.52 270.9 

7.2 24580 1.70 242.02 

7.9 22510 1.86 221.64 

8.6 20737 2.02 204.18 

9.3 19199 2.18 189.04 

5.8 28618 0.93 301 K.108-Z48-LA100ZLP4E 

7.2 24727 1.07 243.47 K.108-LA100ZLP4E 

8.0 22307 1.19 219.64 

4 - 26 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

3 (60 Hz) 8.7 20425 1.30 201.11 K.108-LA100ZLP4E 

9.8 18169 1.46 178.9 

10.7 16606 1.60 163.51 

11.6 15266 1.74 150.31 

12.6 14104 1.88 138.87 

13.6 13087 2.03 128.86 

14.6 12190 2.18 120.03 

16.1 11021 2.41 108.52 

11.2 15907 0.92 156.63 K.88-LA100ZLP4E 

12.1 14684 0.99 144.58 

13.4 13281 1.10 130.77 

14.5 12230 1.19 120.42 

15.7 11311 1.29 111.37 

16.9 10499 1.39 103.38 

19.2 9264 1.58 91.22 

21 8552 1.71 84.21 

23 7663 1.91 75.45 

25 7066 2.07 69.57 

30 5928 2.46 58.37 

21 8470 0.86 83.4 K.68-LA100ZLP4E 

23 7804 0.93 76.84 

25 7087 1.02 69.78 

28 6456 1.12 63.57 

30 5914 1.23 58.23 

34 5277 1.37 51.96 

38 4709 1.54 46.37 

44 4000 1.81 39.39 

53 3329 2.18 32.78 

58 3085 2.35 30.38 

63 2843 2.55 27.99 

69 2582 2.81 25.42 

76 2352 3.08 23.16 

82 2155 3.37 21.22 

153 1159 6.26 11.41 

168 1056 6.87 10.4 

184 967 7.43 9.52 

206 863 7.87 8.5 

231 770 4.99 7.58 

272 654 5.71 6.44 

39 4612 0.86 45.41 K.48-LA100ZLP4E 

43 4123 0.97 40.6 

47 3786 1.05 37.28 

52 3412 1.17 33.6 

61 2935 1.36 28.9 

64 2798 1.42 27.55 

70 2524 1.58 24.85 

78 2289 1.74 22.54 

85 2086 1.91 20.54 

93 1907 2.09 18.78 

104 1705 2.33 16.79 

113 1566 2.54 15.42 

126 1412 2.76 13.9 

146 1214 3.06 11.95 

154 1153 2.23 11.35 

172 1031 2.44 10.15 

4 - 27




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

3 (60 Hz) 188 947 2.59 9.32 K.48-LA100ZLP4E 

208 853 2.78 8.4 

242 733 3.09 7.22 

119 1492 1.07 14.69 K.38-LA100ZLP4E 

138 1285 1.18 12.65 

152 1168 1.26 11.5 

163 1089 1.29 10.72 

180 987 1.42 9.72 

198 899 1.56 8.85 

224 794 1.77 7.82 

242 733 1.92 7.22 

281 632 2.13 6.22 

310 574 2.28 5.65 

69 2619 0.84 25.38 B.38-LA100ZLP4E 

78 2312 0.96 22.41 

87 2086 1.04 20.22 

95 1891 1.11 18.33 

105 1723 1.18 16.7 

115 1577 1.26 15.28 

128 1409 1.36 13.66 

140 1290 1.51 12.5 

158 1140 1.73 11.05 

175 1034 1.89 10.02 

198 912 2.29 8.84 

219 823 2.54 7.98 

242 747 2.80 7.24 

266 680 3.07 6.59 

290 622 3.34 6.03 

325 556 3.36 5.39 

354 511 3.83 4.95 

392 460 4.09 4.46 

456 396 4.53 3.84 

138 1308 0.88 12.17 B.28-LA90ZLB4 

156 1156 0.99 10.76 

169 1068 1.06 9.94 

196 920 1.16 8.56 

216 836 1.24 7.78 

224 805 0.99 7.49 

249 727 1.10 6.76 

274 659 1.21 6.13 

301 600 1.33 5.58 

340 531 1.50 4.94 

368 490 1.57 4.56 

429 421 1.72 3.92 

471 384 1.82 3.57 

4 (60 Hz) 2.6 84809 2.09 669 K.188-Z88-LA100ZLD4E 

1.1 196621 0.90 1551 K.188-Z68-LA100ZLD4E 

1.4 163027 1.09 1286 

1.5 143884 1.23 1135 

1.8 122714 1.44 968 

2.2 102304 1.73 807 

2.6 84809 2.09 669 

1.7 130954 0.91 1033 K.168-Z68-LA100ZLD4E 

2.0 111685 1.07 881 

2.4 93176 1.28 735 

4 - 28 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

4 (60 Hz) 2.9 77203 1.55 609 K.168-Z68-LA100ZLD4E 

3.3 68076 1.75 537 

3.8 58061 2.06 458 

3.1 72132 0.98 569 K.148-Z68-LA100ZLD4E 

3.5 63639 1.11 502 

4.1 54258 1.30 428 

4.9 45257 1.56 357 

5.9 37524 1.89 296 

5.7 41447 1.71 306.08 K.148-LA100ZLD4E 

6.4 37160 1.90 274.42 

7.0 34063 2.08 251.55 

7.5 31409 2.25 231.95 

4.6 47792 0.88 377 K.128-Z48-LA100ZLD4E 

5.6 39679 1.05 313 

5.9 39999 1.05 295.38 K.128-LA100ZLD4E 

6.5 36684 1.14 270.9 

7.2 32773 1.28 242.02 

7.9 30013 1.39 221.64 

8.6 27649 1.51 204.18 

9.3 25599 1.64 189.04 

10.0 23806 1.76 175.8 

10.7 22223 1.88 164.11 

11.9 19884 2.10 146.84 

12.9 18424 2.27 136.06 

8.0 29742 0.89 219.64 K.108-LA100ZLD4E 

8.7 27233 0.97 201.11 

9.8 24226 1.10 178.9 

10.7 22141 1.20 163.51 

11.6 20354 1.30 150.31 

12.6 18805 1.41 138.87 

13.6 17449 1.52 128.86 

14.6 16254 1.63 120.03 

16.1 14695 1.81 108.52 

17.5 13528 1.96 99.9 

19.5 12167 2.18 89.85 

21 11226 2.36 82.9 

14.5 16307 0.90 120.42 K.88-LA100ZLD4E 

15.7 15081 0.97 111.37 

16.9 13999 1.04 103.38 

19.2 12352 1.18 91.22 

21 11403 1.28 84.21 

23 10217 1.43 75.45 

25 9421 1.55 69.57 

30 7904 1.85 58.37 

35 6744 2.16 49.8 

42 5620 2.60 41.5 

30 7885 0.92 58.23 K.68-LA100ZLD4E 

34 7036 1.03 51.96 

38 6279 1.16 46.37 

44 5334 1.36 39.39 

53 4439 1.63 32.78 

58 4114 1.76 30.38 

63 3790 1.91 27.99 

69 3442 2.11 25.42 

76 3136 2.31 23.16 

4 - 29




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

4 (60 Hz) 82 2873 2.52 21.22 K.68-LA100ZLD4E 

92 2563 2.83 18.93 

104 2287 3.17 16.89 

122 1943 3.70 14.35 

147 1617 4.20 11.94 

153 1545 2.49 11.41 

168 1408 2.65 10.4 

184 1289 2.82 9.52 

206 1151 3.05 8.5 

231 1026 3.30 7.58 

272 872 3.70 6.44 

326 726 4.20 5.36 

52 4550 0.87 33.6 K.48-LA100ZLD4E 

61 3913 1.02 28.9 

64 3731 1.07 27.55 

70 3365 1.18 24.85 

78 3052 1.30 22.54 

85 2781 1.43 20.54 

93 2543 1.57 18.78 

104 2274 1.75 16.79 

113 2088 1.91 15.42 

126 1882 2.07 13.9 

146 1618 2.30 11.95 

154 1537 1.67 11.35 

172 1374 1.83 10.15 

188 1262 1.94 9.32 

208 1137 2.08 8.4 

242 978 2.32 7.22 

138 1713 0.89 12.65 K.38-LA100ZLD4E 

152 1557 0.95 11.5 

163 1452 0.97 10.72 

180 1316 1.07 9.72 

198 1198 1.17 8.85 

224 1059 1.33 7.82 

242 978 1.44 7.22 

281 842 1.60 6.22 

310 765 1.71 5.65 

105 2297 0.89 16.7 B.38-LA100ZLD4E 

115 2102 0.95 15.28 

128 1879 1.02 13.66 

140 1720 1.13 12.5 

158 1520 1.30 11.05 

175 1378 1.42 10.02 

198 1216 1.72 8.84 

219 1098 1.90 7.98 

242 996 2.10 7.24 

266 907 2.30 6.59 

290 830 2.51 6.03 

325 742 2.52 5.39 

354 681 2.87 4.95 

392 614 3.07 4.46 

456 528 3.40 3.84 

204 1178 0.91 8.56 B.28-LA100ZLD4E 

225 1070 0.97 7.78 

259 930 0.86 6.76 

4 - 30 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

4 (60 Hz) 285 843 0.94 6.13 B.28-LA100ZLD4E 

314 768 1.04 5.58 

354 680 1.17 4.94 

384 627 1.27 4.56 

446 539 1.43 3.92 

490 491 1.48 3.57 

5,5 (60 Hz) 2.6 116281 1.52 669 K.188-Z88-LA112ZMP4E 

3.2 95249 1.86 548 

3.5 87428 2.02 503 

1.5 197277 0.90 1135 K.188-Z68-LA112ZMP4E 

1.8 168251 1.05 968 

2.2 140267 1.26 807 

2.6 116281 1.52 669 

2.4 127752 0.93 735 K.168-Z68-LA112ZMP4E 

2.9 105852 1.13 609 

3.3 93337 1.28 537 

3.8 79606 1.50 458 

4.6 66396 1.80 382 

5.5 55099 2.17 317 

4.1 74392 0.95 428 K.148-Z68-LA112ZMP4E 

4.9 62051 1.14 357 

5.9 51449 1.38 296 

5.7 56828 1.25 306.08 K.148-LA112ZMP4E 

6.4 50950 1.39 274.42 

7.0 46704 1.52 251.55 

7.6 43065 1.64 231.95 

8.2 39910 1.77 214.96 

8.6 37946 1.87 204.38 

9.2 35465 2.00 191.02 

10.4 31284 2.26 168.5 

7.3 44934 0.93 242.02 K.128-LA112ZMP4E 

7.9 41150 1.02 221.64 

8.6 37909 1.10 204.18 

9.3 35098 1.19 189.04 

10.0 32640 1.28 175.8 

10.7 30469 1.37 164.11 

12.0 27263 1.54 146.84 

12.9 25261 1.66 136.06 

14.1 23158 1.81 124.73 

15.3 21229 1.97 114.34 

18.0 18091 2.31 97.44 

10.7 30358 0.87 163.51 K.108-LA112ZMP4E 

11.7 27907 0.95 150.31 

12.6 25783 1.03 138.87 

13.6 23925 1.11 128.86 

14.6 22285 1.19 120.03 

16.2 20148 1.32 108.52 

17.6 18548 1.43 99.9 

19.5 16682 1.59 89.85 

21 15391 1.72 82.9 

25 13041 2.04 70.24 

29 11366 2.34 61.22 

34 9669 2.75 52.08 

19.2 16936 0.86 91.22 K.88-LA112ZMP4E 

21 15635 0.93 84.21 

4 - 31




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

5,5 (60 Hz) 23 14008 1.04 75.45 K.88-LA112ZMP4E 

25 12917 1.13 69.57 

30 10837 1.35 58.37 

35 9246 1.58 49.8 

42 7705 1.89 41.5 

51 6387 2.29 34.4 

57 5731 2.55 30.87 

62 5291 2.76 28.5 

69 4740 3.08 25.53 

75 4371 3.34 23.54 

157 2081 6.68 11.21 

187 1747 7.59 9.41 

219 1491 8.41 8.03 

262 1242 9.54 6.69 

38 8609 0.84 46.37 K.68-LA112ZMP4E 

45 7313 0.99 39.39 

54 6086 1.19 32.78 

58 5640 1.29 30.38 

63 5197 1.40 27.99 

69 4720 1.54 25.42 

76 4300 1.69 23.16 

83 3940 1.84 21.22 

93 3515 2.06 18.93 

104 3136 2.31 16.89 

122 2664 2.70 14.35 

147 2217 3.07 11.94 

154 2118 1.81 11.41 

169 1931 1.93 10.4 

184 1768 2.06 9.52 

206 1578 2.23 8.5 

232 1407 2.41 7.58 

273 1196 2.70 6.44 

327 995 3.07 5.36 

71 4614 0.86 24.85 K.48-LA112ZMP4E 

78 4185 0.95 22.54 

85 3814 1.04 20.54 

93 3487 1.14 18.78 

105 3117 1.28 16.79 

114 2863 1.39 15.42 

126 2581 1.51 13.9 

147 2219 1.67 11.95 

155 2107 1.22 11.35 

173 1884 1.33 10.15 

188 1730 1.42 9.32 

209 1560 1.52 8.4 

243 1340 1.69 7.22 

198 1643 0.86 8.85 K.38-LA112ZMP4E 

224 1452 0.97 7.82 

243 1340 1.05 7.22 

282 1155 1.16 6.22 

311 1049 1.25 5.65 

7,5 (60 Hz) 2.2 190729 0.93 807 K.188-Z68-LA132SP4E 

2.6 158114 1.12 669 

2.6 158114 1.12 669 K.188-Z88-LA132SP4E 

3.2 129516 1.37 548 

4 - 32 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

7,5 (60 Hz) 3.5 118881 1.49 503 K.188-Z88-LA132SP4E 

4.1 101391 1.75 429 

5.0 83193 2.13 352 

2.9 143933 0.83 609 K.168-Z68-LA132SP4E 

3.3 126917 0.94 537 

3.8 108245 1.10 458 

4.6 90283 1.32 382 

5.6 74921 1.59 317 

6.1 72695 1.64 287.95 K.168-LA132SP4E 

6.7 66694 1.79 264.18 

7.2 61549 1.94 243.8 

7.8 57093 2.09 226.15 

8.3 53857 2.22 213.33 

4.9 84375 0.84 357 K.148-Z68-LA132SP4E 

5.9 69958 1.01 296 

6.4 69280 1.02 274.42 K.148-LA132SP4E 

7.0 63506 1.11 251.55 

7.6 58558 1.21 231.95 

8.2 54268 1.30 214.96 

8.6 51597 1.37 204.38 

9.2 48225 1.47 191.02 

10.4 42539 1.66 168.5 

11.1 40123 1.76 158.93 

12.4 35953 1.97 142.41 

13.4 33196 2.13 131.49 

9.3 47725 0.88 189.04 K.128-LA132SP4E 

10.0 44382 0.94 175.8 

10.7 41431 1.01 164.11 

12.0 37071 1.13 146.84 

12.9 34349 1.22 136.06 

14.1 31489 1.33 124.73 

15.4 28866 1.45 114.34 

18.1 24600 1.70 97.44 

20 21706 1.93 85.98 

24 18475 2.27 73.18 

28 16008 2.61 63.41 

14.7 30303 0.88 120.03 K.108-LA132SP4E 

16.2 27397 0.97 108.52 

17.6 25221 1.05 99.9 

19.6 22683 1.17 89.85 

21 20929 1.27 82.9 

25 17733 1.50 70.24 

29 15455 1.72 61.22 

34 13148 2.02 52.08 

40 11219 2.37 44.44 

48 9200 2.72 36.44 

52 8551 3.10 33.87 

30 14736 0.99 58.37 K.88-LA132SP4E 

35 12572 1.16 49.8 

42 10477 1.39 41.5 

51 8685 1.68 34.4 

57 7793 1.87 30.87 

62 7195 2.03 28.5 

69 6445 2.27 25.53 

75 5943 2.46 23.54 

4 - 33




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

7,5 (60 Hz) 89 4986 2.79 19.75 K.88-LA132SP4E 

104 4254 3.12 16.85 

125 3545 3.54 14.04 

151 2939 4.03 11.64 

157 2830 2.52 11.21 

187 2376 2.85 9.41 

219 2027 3.18 8.03 

263 1689 3.61 6.69 

318 1399 4.12 5.54 

54 8276 0.88 32.78 K.68-LA132SP4E 

58 7670 0.95 30.38 

63 7066 1.03 27.99 

69 6417 1.13 25.42 

76 5847 1.24 23.16 

83 5357 1.35 21.22 

93 4779 1.52 18.93 

104 4264 1.70 16.89 

123 3623 1.98 14.35 

147 3014 2.25 11.94 

154 2881 1.33 11.41 

169 2626 1.42 10.4 

185 2403 1.51 9.52 

207 2146 1.64 8.5 

232 1914 1.77 7.58 

273 1626 1.99 6.44 

328 1353 2.26 5.36 

10 (60 Hz) 3.2 172689 1.02 548 K.188-Z88-LA132ZMP4E 

3.5 158508 1.12 503 

4.1 135189 1.31 429 

5.0 110924 1.60 352 

5.5 101155 1.75 321 

6.4 86344 2.05 274 

4.6 120378 0.99 382 K.168-Z68-LA132ZMP4E 

5.6 99895 1.20 317 

6.1 96927 1.23 287.95 K.168-LA132ZMP4E 

6.7 88926 1.34 264.18 

7.2 82066 1.46 243.8 

7.8 76125 1.57 226.15 

8.3 71809 1.66 213.33 

8.8 67167 1.78 199.54 

9.9 59725 2.00 177.43 

10.5 56382 2.12 167.5 

11.7 50613 2.36 150.36 

7.6 78077 0.91 231.95 K.148-LA132ZMP4E 

8.2 72358 0.98 214.96 

8.6 68797 1.03 204.38 

9.2 64299 1.10 191.02 

10.4 56719 1.25 168.5 

11.1 53498 1.32 158.93 

12.4 47937 1.48 142.41 

13.4 44261 1.60 131.49 

15.7 37818 1.87 112.35 

17.3 34176 2.07 101.53 

18.0 32927 2.15 97.82 

21 28481 2.49 84.61 

4 - 34 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

10 (60 Hz) 12.9 45799 0.91 136.06 K.128-LA132ZMP4E 

14.1 41985 1.00 124.73 

15.4 38488 1.09 114.34 

18.1 32799 1.28 97.44 

20 28942 1.45 85.98 

24 24633 1.70 73.18 

28 21344 1.96 63.41 

33 17962 2.33 53.36 

37 16204 2.58 48.14 

19.6 30244 0.88 89.85 K.108-LA132ZMP4E 

21 27905 0.95 82.9 

25 23644 1.12 70.24 

29 20607 1.29 61.22 

34 17531 1.51 52.08 

40 14959 1.77 44.44 

48 12266 2.04 36.44 

52 11401 2.33 33.87 

56 10519 2.52 31.25 

66 8913 2.86 26.48 

76 7769 3.15 23.08 

90 6608 3.52 19.63 

136 4342 5.11 12.9 

160 3693 5.66 10.97 

35 16763 0.87 49.8 K.88-LA132ZMP4E 

42 13969 1.05 41.5 

51 11579 1.26 34.4 

57 10391 1.40 30.87 

62 9593 1.52 28.5 

69 8594 1.70 25.53 

75 7924 1.84 23.54 

89 6648 2.09 19.75 

104 5672 2.34 16.85 

125 4726 2.65 14.04 

151 3918 3.02 11.64 

157 3773 1.89 11.21 

187 3168 2.13 9.41 

219 2703 2.38 8.03 

263 2252 2.71 6.69 

318 1865 3.09 5.54 

76 7796 0.93 23.16 K.68-LA132ZMP4E 

83 7143 1.02 21.22 

93 6372 1.14 18.93 

104 5685 1.28 16.89 

123 4830 1.49 14.35 

147 4019 1.69 11.94 

154 3841 1.00 11.41 

169 3501 1.07 10.4 

185 3205 1.13 9.52 

207 2861 1.23 8.5 

232 2552 1.33 7.58 

273 2168 1.49 6.44 

328 1804 1.69 5.36 

12,3 (60 Hz) 3.5 196641 0.90 503 K.188-Z88-LA132ZMP4 

4.1 167711 1.06 429 

5.0 137609 1.29 352 

4 - 35




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

12,3 (60 Hz) 5.4 125490 1.41 321 K.188-Z88-LA132ZMP4 

6.4 107116 1.65 274 

7.8 87961 2.01 225 

9.1 79902 2.21 191.34 K.188-LA132ZMP4 

5.5 123927 0.96 317 K.168-Z68-LA132ZMP4 

6.1 120245 0.99 287.95 K.168-LA132ZMP4 

6.6 110319 1.08 264.18 

7.2 101809 1.17 243.8 

7.7 94438 1.26 226.15 

8.2 89085 1.34 213.33 

8.7 83326 1.43 199.54 

9.8 74093 1.61 177.43 

10.4 69946 1.71 167.5 

11.6 62789 1.90 150.36 

12.6 57627 2.07 138 

9.1 79768 0.89 191.02 K.148-LA132ZMP4 

10.4 70364 1.01 168.5 

11.0 66368 1.07 158.93 

12.3 59469 1.19 142.41 

13.3 54909 1.29 131.49 

15.5 46916 1.51 112.35 

17.2 42398 1.67 101.53 

17.8 40849 1.73 97.82 

21 35332 2.00 84.61 

24 30818 2.30 73.8 

28 26375 2.68 63.16 

15.3 47747 0.88 114.34 K.128-LA132ZMP4 

17.9 40690 1.03 97.44 

20 35904 1.17 85.98 

24 30559 1.37 73.18 

28 26479 1.58 63.41 

33 22283 1.88 53.36 

36 20103 2.08 48.14 

42 17280 2.42 41.38 

45 16365 2.56 39.19 

49 15000 2.79 35.92 

25 29332 0.90 70.24 K.108-LA132ZMP4 

29 25565 1.04 61.22 

34 21748 1.22 52.08 

39 18558 1.43 44.44 

48 15217 1.65 36.44 

52 14144 1.88 33.87 

56 13050 2.03 31.25 

66 11058 2.31 26.48 

76 9638 2.54 23.08 

89 8197 2.84 19.63 

104 6995 3.17 16.75 

127 5738 3.64 13.74 

135 5387 3.18 12.9 

159 4581 3.56 10.97 

186 3909 3.98 9.36 

227 3207 4.57 7.68 

51 14365 1.02 34.4 K.88-LA132ZMP4 

57 12891 1.13 30.87 

61 11901 1.23 28.5 

4 - 36 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

12,3 (60 Hz) 68 10661 1.37 25.53 K.88-LA132ZMP4 

74 9830 1.49 23.54 

88 8247 1.69 19.75 

104 7036 1.88 16.85 

124 5863 2.14 14.04 

150 4861 2.44 11.64 

156 4681 1.52 11.21 

185 3930 1.72 9.41 

217 3353 1.92 8.03 

261 2794 2.18 6.69 

315 2313 2.49 5.54 

92 7905 0.92 18.93 K.68-LA132ZMP4 

103 7053 1.03 16.89 

122 5992 1.20 14.35 

146 4986 1.36 11.94 

168 4343 0.88 10.4 

183 3975 0.94 9.52 

205 3550 1.02 8.5 

230 3165 1.11 7.58 

271 2689 1.26 6.44 

326 2238 1.44 5.36 

15 (60 Hz) 4.1 202208 0.88 429 K.188-Z88-LA160MP4E 

5.0 165915 1.07 352 

5.5 151303 1.17 321 

6.4 129149 1.37 274 

7.8 106053 1.67 225 

9.2 96337 1.84 191.34 K.188-LA160MP4E 

10.2 86992 2.03 172.78 

10.9 81524 2.17 161.92 

8.3 107409 1.11 213.33 K.168-LA160MP4E 

8.8 100466 1.19 199.54 

9.9 89333 1.34 177.43 

10.5 84334 1.42 167.5 

11.7 75704 1.58 150.36 

12.8 69481 1.72 138 

14.8 59960 1.99 119.09 

16.9 52453 2.28 104.18 

11.1 80019 0.88 158.93 K.148-LA160MP4E 

12.4 71701 0.99 142.41 

13.4 66203 1.07 131.49 

15.7 56567 1.25 112.35 

17.4 51119 1.38 101.53 

18.0 49251 1.44 97.82 

21 42600 1.66 84.61 

24 37157 1.90 73.8 

28 31800 2.23 63.16 

31 28482 2.49 56.57 

18.0 49060 0.85 97.44 K.128-LA160MP4E 

21 43290 0.97 85.98 

24 36845 1.14 73.18 

28 31926 1.31 63.41 

33 26866 1.56 53.36 

37 24238 1.73 48.14 

43 20834 2.01 41.38 

45 19732 2.12 39.19 

4 - 37




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

15 (60 Hz) 49 18085 2.31 35.92 K.128-LA160MP4E 

58 15412 2.72 30.61 

65 13604 3.08 27.02 

29 30823 0.86 61.22 K.108-LA160MP4E 

34 26222 1.01 52.08 

40 22375 1.19 44.44 

48 18347 1.37 36.44 

52 17053 1.56 33.87 

56 15734 1.69 31.25 

67 13332 1.91 26.48 

76 11620 2.10 23.08 

90 9883 2.36 19.63 

105 8433 2.63 16.75 

128 6918 3.02 13.74 

137 6495 2.64 12.9 

161 5523 2.96 10.97 

189 4713 3.30 9.36 

230 3867 3.79 7.68 

57 15543 0.94 30.87 K.88-LA160MP4E 

62 14349 1.02 28.5 

69 12854 1.14 25.53 

75 11852 1.23 23.54 

89 9944 1.40 19.75 

105 8484 1.56 16.85 

126 7069 1.77 14.04 

152 5861 2.02 11.64 

157 5644 1.26 11.21 

188 4738 1.43 9.41 

220 4043 1.59 8.03 

264 3368 1.81 6.69 

319 2789 2.07 5.54 

20 (60 Hz) 5.5 201737 0.88 321 K.188-Z88-LA160ZLP4E 

6.4 172199 1.03 274 

7.8 141405 1.25 225 

9.2 128449 1.38 191.34 K.188-LA160ZLP4E 

10.2 115990 1.53 172.78 

10.9 108699 1.63 161.92 

12.7 93366 1.90 139.08 

14.7 80665 2.19 120.16 

16.6 71206 2.49 106.07 

8.8 133954 0.89 199.54 K.168-LA160ZLP4E 

9.9 119111 1.00 177.43 

10.5 112445 1.06 167.5 

11.7 100939 1.18 150.36 

12.8 92641 1.29 138 

14.8 79947 1.49 119.09 

16.9 69938 1.71 104.18 

19.5 60821 1.96 90.6 

22 53363 2.24 79.49 

26 45126 2.65 67.22 

15.7 75422 0.94 112.35 K.148-LA160ZLP4E 

17.4 68159 1.04 101.53 

18.0 65668 1.08 97.82 

21 56800 1.25 84.61 

24 49543 1.43 73.8 

4 - 38 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

20 (60 Hz) 28 42400 1.67 63.16 K.148-LA160ZLP4E 

31 37976 1.86 56.57 

37 32163 2.20 47.91 

43 27779 2.55 41.38 

28 42568 0.98 63.41 K.128-LA160ZLP4E 

33 35821 1.17 53.36 

37 32317 1.30 48.14 

43 27779 1.51 41.38 

45 26309 1.59 39.19 

49 24114 1.74 35.92 

58 20549 2.04 30.61 

65 18139 2.31 27.02 

77 15434 2.71 22.99 

89 13373 3.13 19.92 

105 11251 3.72 16.76 

117 10157 4.03 15.13 

141 8432 4.64 12.56 

162 7304 3.90 10.88 

193 6149 4.43 9.16 

214 5545 4.67 8.26 

249 4766 5.26 7.1 

40 29833 0.89 44.44 K.108-LA160ZLP4E 

48 24463 1.02 36.44 

52 22737 1.17 33.87 

56 20979 1.27 31.25 

67 17776 1.43 26.48 

76 15494 1.58 23.08 

90 13178 1.77 19.63 

105 11245 1.97 16.75 

128 9224 2.27 13.74 

137 8660 1.98 12.9 

161 7364 2.22 10.97 

189 6284 2.48 9.36 

230 5156 2.84 7.68 

75 15803 0.92 23.54 K.88-LA160ZLP4E 

89 13258 1.05 19.75 

105 11312 1.17 16.85 

126 9425 1.33 14.04 

152 7814 1.52 11.64 

157 7525 0.95 11.21 

188 6317 1.07 9.41 

220 5391 1.19 8.03 

264 4491 1.36 6.69 

319 3719 1.55 5.54 

25 (60 Hz) 7.9 176256 1.00 225 K.188-Z88-LG180ZMB4E 

9.3 160108 1.11 191.34 K.188-LG180ZMB4E 

10.2 144578 1.22 172.78 

10.9 135490 1.31 161.92 

12.7 116378 1.52 139.08 

14.7 100547 1.76 120.16 

16.7 88756 1.99 106.07 

18.5 79895 2.21 95.48 

11.8 125817 0.95 150.36 K.168-LG180ZMB4E 

12.8 115475 1.03 138 

14.9 99651 1.20 119.09 

4 - 39




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

25 (60 Hz) 17.0 87175 1.37 104.18 K.168-LG180ZMB4E 

19.5 75812 1.58 90.6 

22 66515 1.80 79.49 

26 56248 2.12 67.22 

29 51035 2.34 60.99 

33 44500 2.68 53.18 

18.1 81853 0.86 97.82 K.148-LG180ZMB4E 

21 70799 1.00 84.61 

24 61754 1.15 73.8 

28 52851 1.34 63.16 

31 47336 1.50 56.57 

37 40090 1.77 47.91 

43 34626 2.04 41.38 

58 25722 2.75 30.74 

57 26024 2.72 31.1 

67 22241 3.18 26.58 

201 7355 9.62 8.79 

33 44650 0.94 53.36 K.128-LG180ZMB4E 

37 40282 1.04 48.14 

43 34626 1.21 41.38 

45 32793 1.28 39.19 

49 30057 1.39 35.92 

58 25614 1.63 30.61 

66 22610 1.85 27.02 

77 19237 2.18 22.99 

89 16669 2.51 19.92 

106 14024 2.98 16.76 

117 12660 3.23 15.13 

136 10878 3.59 13 

141 10510 2.71 12.56 

163 9104 2.99 10.88 

193 7665 3.38 9.16 

214 6912 3.63 8.26 

249 5941 4.03 7.1 

52 28341 0.94 33.87 K.108-LG180ZMB4E 

57 26149 1.02 31.25 

67 22158 1.15 26.48 

77 19313 1.27 23.08 

90 16426 1.42 19.63 

106 14016 1.58 16.75 

129 11497 1.82 13.74 

137 10794 1.59 12.9 

161 9179 1.78 10.97 

189 7832 1.99 9.36 

230 6426 2.28 7.68 

30 (60 Hz) 9.3 192130 0.92 191.34 K.188-LG180ZLB4E 

10.2 173493 1.02 172.78 

10.9 162588 1.09 161.92 

12.7 139654 1.27 139.08 

14.7 120656 1.47 120.16 

16.7 106508 1.66 106.07 

18.5 95874 1.85 95.48 

22 79557 2.22 79.23 

25 72538 2.44 72.24 

12.8 138570 0.86 138 K.168-LG180ZLB4E 

4 - 40 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

30 (60 Hz) 14.9 119581 1.00 119.09 K.168-LG180ZLB4E 

17.0 104610 1.14 104.18 

19.5 90974 1.31 90.6 

22 79818 1.50 79.49 

26 67497 1.77 67.22 

29 61242 1.95 60.99 

33 53399 2.24 53.18 

39 45336 2.63 45.15 

24 74105 0.96 73.8 K.148-LG180ZLB4E 

28 63421 1.12 63.16 

31 56803 1.25 56.57 

37 48108 1.47 47.91 

43 41551 1.70 41.38 

57 31228 2.27 31.1 

58 30867 2.29 30.74 

67 26690 2.65 26.58 

76 23286 3.04 23.19 

89 19922 3.55 19.84 

201 8826 8.02 8.79 

238 7471 9.00 7.44 

275 6457 9.97 6.43 

37 48339 0.87 48.14 K.128-LG180ZLB4E 

43 41551 1.01 41.38 

45 39352 1.06 39.19 

49 36068 1.16 35.92 

58 30736 1.36 30.61 

66 27132 1.54 27.02 

77 32085 1.81 22.99 

89 20002 2.09 19.92 

106 16829 2.49 16.76 

117 15192 2.69 15.13 

136 13054 3.00 13 

141 12612 2.26 12.56 

163 10925 2.50 10.88 

193 9198 2.81 9.16 

214 8294 3.02 8.26 

249 7129 3.36 7.1 

57 31379 0.85 31.25 K.108-LG180ZLB4E 

67 26589 0.96 26.48 

77 23175 1.06 23.08 

90 19711 1.18 19.63 

106 16819 1.32 16.75 

129 13797 1.51 13.74 

137 12953 1.32 12.9 

161 11015 1.48 10.97 

189 9399 1.66 9.36 

230 7712 1.90 7.68 

40 (60 Hz) 12.7 186205 0.95 139.08 K.188-LG200LB4E 

14.7 160875 1.10 120.16 

16.7 142010 1.25 106.07 

18.5 127832 1.38 95.48 

22 106076 1.67 79.23 

25 96718 1.83 72.24 

28 84855 2.09 63.38 

32 72926 2.43 54.47 

4 - 41




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

40 (60 Hz) 17.0 139480 0.86 104.18 K.168-LG200LB4E 

19.5 121299 0.98 90.6 

22 106424 1.12 79.49 

26 89997 1.33 67.22 

29 81656 1.46 60.99 

33 71199 1.68 53.18 

39 60448 1.98 45.15 

51 46257 2.58 34.55 

54 43552 2.74 32.53 

62 38210 3.13 28.54 

152 15624 7.65 11.67 

174 13616 8.50 10.17 

31 75738 0.93 56.57 K.148-LG200LB4E 

37 64144 1.10 47.91 

43 55401 1.28 41.38 

57 41638 1.70 31.1 

58 41156 1.72 30.74 

67 35586 1.99 26.58 

76 31048 2.28 23.19 

89 26563 2.66 19.84 

100 23791 2.98 17.77 

118 20149 3.34 15.05 

136 17405 3.70 13 

181 13080 4.51 9.77 

201 11768 2.99 8.79 

238 9961 3.36 7.44 

275 8609 3.72 6.43 

366 6467 4.54 4.83 

49 48091 0.87 35.92 K.128-LG200LB4E 

58 40982 1.02 30.61 

66 36175 1.16 27.02 

77 30780 1.36 22.99 

89 26670 1.57 19.92 

106 22439 1.87 16.76 

117 20257 2.02 15.13 

136 17405 2.25 13 

141 16816 1.69 12.56 

163 14567 1.87 10.88 

193 12264 2.11 9.16 

214 11059 2.27 8.26 

249 9506 2.52 7.1 

50 (60 Hz) 14.9 199403 0.89 120.16 K.188-LG225S4E 

16.8 176021 1.01 106.07 

18.7 158447 1.12 95.48 

23 131481 1.35 79.23 

25 119881 1.48 72.24 

28 105178 1.68 63.38 

33 90392 1.96 54.47 

42 70412 2.51 42.43 

52 56887 3.11 34.28 

22 131912 0.91 79.49 K.168-LG225S4E 

27 111550 1.07 67.22 

29 101212 1.18 60.99 

34 88251 1.35 53.18 

40 74926 1.59 45.15 

4 - 42 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

50 (60 Hz) 52 57335 2.08 34.55 K.168-LG225S4E 

55 53983 2.21 32.53 

63 47362 2.52 28.54 

74 40060 2.98 24.14 

82 36343 3.19 21.9 

94 31680 3.51 19.09 

153 19366 5.46 11.67 

176 16877 5.78 10.17 

207 14338 4.30 8.64 

270 10969 5.40 6.61 

37 79506 0.89 47.91 K.148-LG225S4E 

43 68669 1.03 41.38 

57 51610 1.37 31.1 

58 51012 1.39 30.74 

67 44109 1.60 26.58 

77 38483 1.84 23.19 

90 32924 2.15 19.84 

100 29489 2.40 17.77 

119 24975 2.69 15.05 

137 21573 2.98 13 

183 16213 3.64 9.77 

203 14587 2.41 8.79 

240 12347 2.71 7.44 

278 10670 3.00 6.43 

370 8015 3.66 4.83 

66 44839 0.93 27.02 K.128-K4-LGI225S4E 

78 38151 1.10 22.99 

90 33057 1.27 19.92 

107 27813 1.50 16.76 

118 25108 1.63 15.13 

137 21573 1.81 13 

142 20843 1.37 12.56 

164 18055 1.51 10.88 

195 15201 1.70 9.16 

216 13707 1.83 8.26 

251 11782 2.03 7.1 

60 (60 Hz) 18.7 190137 0.93 95.48 K.188-LG225ZM4E 

23 157777 1.12 79.23 

25 143857 1.23 72.24 

28 126214 1.40 63.38 

33 108470 1.63 54.47 

42 84494 2.09 42.43 

52 68264 2.59 34.28 

63 56655 3.12 28.45 

27 133860 0.89 67.22 K.168-LG225ZM4E 

29 121454 0.98 60.99 

34 105901 1.13 53.18 

40 89911 1.33 45.15 

52 68802 1.74 34.55 

55 64780 1.84 32.53 

63 56834 2.10 28.54 

74 48072 2.48 24.14 

82 43611 2.65 21.9 

94 38015 2.92 19.09 

110 32280 3.27 16.21 

4 - 43




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

60 (60 Hz) 144 24713 3.94 12.41 K.168-LG225ZM4E 

153 23239 2.65 11.67 

176 20252 2.92 10.17 

207 17206 3.27 8.64 

270 13163 3.95 6.61 

43 82403 0.86 41.38 K.148-LG225ZM4E 

57 61932 1.14 31.1 

58 61215 1.16 30.74 

67 52931 1.34 26.58 

77 46180 1.53 23.19 

90 39509 1.79 19.84 

100 35387 2.00 17.77 

119 29970 2.24 15.05 

137 25888 2.49 13 

183 19456 3.03 9.77 

203 17504 2.01 8.79 

240 14816 2.26 7.44 

278 12805 2.50 6.43 

370 9618 3.05 4.83 

78 45782 0.91 22.99 K.128-K4-LGI225ZM4E 

90 39668 1.06 19.92 

107 33375 1.25 16.76 

118 30130 1.36 15.13 

137 25888 1.51 13.0 

142 25012 1.14 12.56 

164 21666 1.26 10.88 

195 18241 1.42 9.16 

216 16449 1.52 8.26 

251 14139 1.69 7.1 

75 (60 Hz) 23 197221 0.90 79.23 K.188-LG225YMB4E 

25 179821 0.98 72.24 

28 157767 1.12 63.38 

33 135588 1.31 54.47 

42 105618 1.68 42.43 

52 85331 2.07 34.28 

63 70818 2.50 28.45 

69 64570 2.74 25.94 

78 56655 3.12 22.76 

34 132377 0.90 53.18 K.168-LG225YMB4E 

40 112388 1.06 45.15 

52 86003 1.39 34.55 

55 80974 1.48 32.53 

63 71042 1.68 28.54 

74 60090 1.99 24.14 

82 54514 2.12 21.9 

94 47519 2.34 19.09 

110 40350 2.62 16.21 

144 30891 3.16 12.41 

153 29049 2.12 11.67 

176 25315 2.34 10.17 

207 21507 2.62 8.64 

270 16454 3.16 6.61 

58 76519 0.93 30.74 K.148-LG225YMB4E 

57 77415 0.91 31.1 

67 66164 1.07 26.58 

4 - 44 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

75 (60 Hz) 77 57725 1.23 23.19 K.148-LG225YMB4E 

90 49386 1.43 19.84 

100 44233 1.60 17.77 

119 37463 1.80 15.05 

137 32360 1.99 13 

183 24320 2.43 9.77 

203 21880 1.61 8.79 

240 18520 1.81 7.44 

278 16006 2.00 6.43 

370 12023 2.44 4.83 

100 (60 Hz) 33 180481 0.98 54.47 K.188-LG250ZMB4E 

42 140587 1.26 42.43 

52 113583 1.56 34.28 

63 94266 1.88 28.45 

69 85949 2.06 25.94 

79 75413 2.35 22.76 

91 64810 2.73 19.56 

117 50463 3.33 15.23 

148 40092 3.86 12.1 

52 114478 1.04 34.55 K.168-LG250ZMB4E 

55 107785 1.11 32.53 

63 94564 1.26 28.54 

74 79985 1.49 24.14 

82 72563 1.60 21.9 

94 63253 1.76 19.09 

110 53710 1.97 16.21 

144 41119 2.37 12.41 

153 38667 1.60 11.67 

176 33697 1.76 10.17 

207 28628 1.97 8.64 

270 21902 2.37 6.61 

125 (60 Hz) 42 168516 1.05 42.43 K.188-K4-LGI280ZM4E 

52 136148 1.30 34.28 

63 112993 1.57 28.45 

69 103024 1.72 25.94 

79 90394 1.96 22.76 

92 77685 2.28 19.56 

118 60488 2.78 15.23 

148 48057 3.22 12.1 

52 137220 0.87 34.55 K.168-K4-LGI280ZM4E 

55 129197 0.92 32.53 

63 113350 1.05 28.54 

74 95875 1.25 24.14 

82 86979 1.33 21.9 

94 75818 1.46 19.09 

110 64380 1.64 16.21 

144 49288 1.98 12.41 

153 46349 1.33 11.67 

176 40391 1.47 10.17 

207 34315 1.64 8.64 

271 26252 1.98 6.61 

4 - 45


4 - 46 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





on request 

on request 

63 • • 

56C 71 • • • • • • • 

80 • • • • • • • 

140TC 90 • • • • • • • • • 

180TC 100 • • • • • • • • • 

112 • • • • • • • 

210TC 132 • • • • • • • • • 

250TC 160 • • • • • • • • • 

180 • • • • 

280TC 200 • • • • • • • • • 

320TC 225 • • • • • • • • • 

360TC 250 • • • • • • • • • 

280 • • • • 

315 • 






56C 71 26.5 3 5/8 16 1.575 40 54 240 

80 44.2 5 3/4 19 1.575 40 54 240 

140TC 90 88.5 10 7/8 24 1.968 50 139 620 

180TC 100 177 20 1 1/8 28 2.362 60 189 840 

112 230 26 1 1/4 28 2.362 60 225 1000 

210TC 132 540 61 1 3/8 38 3.150 80 382 1700 

250TC 160 867 98 1 5/8 42 4.331 110 405 1800 

180 1752 198 - - - - - - 

280TC 200 1752 198 2 1/8 55 4.331 110 674 3000 

320TC 225 2575 291 2 1/8 60 5.512 140 776 3450 

360TC 250 3150 356 2 3/8 65 5.512 140 877 3900 

280 5132 580 - 70 - 140 1158 5150 

315 11414 1290 - - - - - 


F 

F RAperm V1/2 

0 

F RAperm V1/2 

∅FU1 

0 V1/2 V1 x 

4 - 47


Torque tables 



Gear Type 

B.28 

1150 lb in 


4 - 48 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 

57.53 29 1150 130 • 

48.51 35 1150 130 • • 

43.07 39 1150 130 • • 

37.76 44 1150 130 • • • 

33.79 50 1150 130 • • • 

29.99 56 1150 130 • • • 

26.28 64 1150 130 • • • 

23.11 73 1150 130 • • • 

20.87 80 1150 130 • • • • 

18.19 92 1150 130 • • • 

16.34 103 1150 130 • • • 

14.75 114 1150 130 • • • • 

13.38 126 1150 130 • • • • 

12.17 138 1150 130 • • • • 

10.76 156 1150 130 • • • • 

9.94 169 1132 128 • • • • 

8.56 196 1070 121 • • • • 

7.78 216 1035 117 • • • • 

7.49 224 796 90 • • • 

6.76 248 796 90 • • • • 

6.13 274 796 90 • • • • 

5.58 301 796 90 • • • • 

4.94 340 796 90 • • • • 

4.56 369 769 87 • • • • 

3.92 428 725 82 • • • • 

3.57 471 698 79 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

B.38 

2212 lb in 



T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 

65.69 26 1769 200 • 

57.04 31 2212 250 • • 

50.72 34 2212 250 • • 

44.00 40 2212 250 • • • 

41.11 42 2212 250 • • • 

36.16 48 2212 250 • • • 

31.67 55 2212 250 • • • • 

28.01 62 2212 250 • • • • 

25.38 69 2212 250 • • • • 

22.41 78 2212 250 • • • • 

20.22 86 2167 245 • • • • 

18.33 95 2096 237 • • • • 

16.70 104 2035 230 • • • • 

15.28 114 1990 225 • • • • 

13.66 127 1920 217 • • • • 

12.50 139 1946 220 • • • • 

11.05 157 1973 223 • • • • 

10.02 174 1955 221 • • • • 

8.84 197 2088 236 • • • • 

7.98 218 2088 236 • • • • 

7.24 240 2088 236 • • • • 

6.59 264 2088 236 • • • • 

6.03 289 2079 235 • • • • 

5.39 323 1866 211 • • • • 

4.95 351 1955 221 • • • • 

4.46 390 1884 213 • • • • 

3.84 453 1796 203 • • • • 

4 - 49




Gear Type 

K.38-D.28 

2212 lb in 

K.38-Z.28 

2212 lb in 


4 - 50 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

13129 0.13 2212 250 • 

11327 0.15 2212 250 • • 

9731 0.17 2212 250 • • 

8959 0.19 2212 250 • • • 

8144 0.21 2212 250 • • • 

7209 0.23 2212 250 • • • 

6038 0.28 2212 250 • • • 

5148 0.33 2212 250 • • • 

4376 0.38 2212 250 • • • 

3803 0.44 2212 250 • • • 

3310 0.51 2212 250 • • • 

2986 0.56 2212 250 • • • 

2797 0.60 2212 250 • 

2359 0.71 2212 250 • • 

2094 0.80 2212 250 • • 

1836 0.92 2212 250 • • • 

1643 1.00 2212 250 • • • 

1458 1.20 2212 250 • • • 

1278 1.30 2212 250 • • • 

1124 1.50 2212 250 • • • 

1015 1.70 2212 250 • • • • 

884 1.90 2212 250 • • • 

794 2.10 2212 250 • • • 

717 2.30 2212 250 • • • • 

650 2.60 2212 250 • • • • 

592 2.80 2212 250 • • • • 

523 3.20 2212 250 • • • • 

483 3.50 2212 250 • • • • 

416 4.00 2212 250 • • • • 

378 4.40 2212 250 • • • • 

344 4.90 2212 250 • • • • 

312 5.40 2212 250 • • • • 

284 5.90 2212 250 • • • • 

251 6.70 2212 250 • • • • 

231 7.30 2212 250 • • • • 

199 8.40 2212 250 • • • • 

181 9.30 2212 250 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

K.38 

2212 lb in 



T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 


(4 pol.) (SF=1) (SF=1) 56C 140TC 180TC 

[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 

179.13 9.8 2212 250 • • • 

159.04 11.0 2212 250 • • • 

139.43 12.6 2212 250 • • • • 

124.78 14.0 2212 250 • • • • 

110.75 15.8 2212 250 • • • • 

97.05 18.0 2212 250 • • • • 

85.33 21.0 2212 250 • • • • 

77.09 23.0 2212 250 • • • • 

67.18 26.0 2212 250 • • • • 

60.33 29.0 2212 250 • • • • 

54.47 32.0 2212 250 • • • • 

49.38 35.0 2212 250 • • • • 

44.94 39.0 2212 250 • • • • 

39.73 44.0 2212 250 • • • • 

36.69 48.0 2212 250 • • • • 

31.59 55.0 2212 250 • • • • 

28.72 61.0 2212 250 • • • • 

26.9 65.0 1911 216 • • • • 

24.16 72.0 1849 209 • • • • 

21.81 80.0 1796 203 • • • • 

19.78 88.0 1743 197 • • • • 

17.99 97.0 1689 191 • • • • 

15.91 110.0 1628 184 • • • • 

14.69 119.0 1592 180 • • • • • • 

12.65 138.0 1521 172 • • • • • • 

11.5 152.0 1477 167 • • • • • • 

10.72 163.0 1406 159 • • • • • • 

9.72 180.0 1406 159 • • • • • • 

8.85 198.0 1406 159 • • • • • • 

7.82 224.0 1406 159 • • • • • • 

7.22 242.0 1406 159 • • • • • • 

6.22 281.0 1344 152 • • • • • • 

5.65 310.0 1309 148 • • • • • • 

4 - 51




Gear Type 

K.48-D.28 

3981 lb in 

K.48-Z.28 

3981 lb in 


4 - 52 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

13135 0.13 3981 450 • 

11332 0.15 3981 450 • • 

9735 0.17 3981 450 • • 

8963 0.19 3981 450 • • • 

8148 0.21 3981 450 • • • 

7212 0.23 3981 450 • • • 

6041 0.28 3981 450 • • • 

5151 0.33 3981 450 • • • 

4378 0.38 3981 450 • • • 

3805 0.44 3981 450 • • • 

3312 0.51 3981 450 • • • 

2987 0.56 3981 450 • • • 

2798 0.60 3981 450 • 

2360 0.71 3981 450 • • 

2095 0.80 3981 450 • • 

1837 0.92 3981 450 • • • 

1644 1.00 3981 450 • • • 

1459 1.20 3981 450 • • • 

1279 1.30 3981 450 • • • 

1124 1.50 3981 450 • • • 

1015 1.70 3981 450 • • • • 

885 1.90 3981 450 • • • 

795 2.10 3981 450 • • • 

717 2.30 3981 450 • • • • 

651 2.60 3981 450 • • • • 

592 2.80 3981 450 • • • • 

523 3.20 3981 450 • • • • 

483 3.50 3981 450 • • • • 

416 4.00 3981 450 • • • • 

378 4.40 3981 450 • • • • 

344 4.90 3981 450 • • • • 

312 5.40 3981 450 • • • • 

284 5.90 3981 450 • • • • 

251 6.70 3981 450 • • • • 

232 7.30 3981 450 • • • • 

199 8.40 3981 450 • • • • 

181 9.30 3981 450 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

K.48 

3981 lb in 



T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 


(4 pol.) (SF=1) (SF=1) 56C 140TC 180TC 

[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 

169.53 10.3 3981 450 • • • 

150.76 11.6 3981 450 • • • 

130.78 13.4 3981 450 • • • • 

122.19 14.3 3981 450 • • • • 

107.47 16.3 3981 450 • • • • 

94.12 18.6 3981 450 • • • • • 

83.25 21.0 3981 450 • • • • • • 

75.45 23.0 3981 450 • • • • • • 

66.6 26.0 3981 450 • • • • • • 

60.08 29.0 3981 450 • • • • • • 

54.49 32.0 3981 450 • • • • • • 

49.65 35.0 3981 450 • • • • • • 

45.41 39.0 3981 450 • • • • • • 

40.6 43.0 3981 450 • • • • • • 

37.28 47.0 3981 450 • • • • • • 

33.6 52.0 3981 450 • • • • • • 

28.9 61.0 3981 450 • • • • • • 

27.55 64.0 3981 450 • • • • • • 

24.85 70.0 3981 450 • • • • • • 

22.54 78.0 3981 450 • • • • • • 

20.54 85.0 3981 450 • • • • • • 

18.78 93.0 3981 450 • • • • • • 

16.79 104.0 3981 450 • • • • • • 

15.42 113.0 3981 450 • • • • • • 

13.9 126.0 3893 440 • • • • • • 

11.95 146.0 3716 420 • • • • • • 

11.35 154.0 2574 291 • • • • • • 

10.15 172.0 2512 284 • • • • • • 

9.32 188.0 2450 277 • • • • • • 

8.4 208.0 2371 268 • • • • • • 

7.22 242.0 2265 256 • • • • • • 

4 - 53




Gear Type 

K.68-D.28 

7255 lb in 

K.68-Z.28 

7255 lb in 


4 - 54 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

20103 0.08 7255 820 • 

17343 0.10 7255 820 • • 

14900 0.11 7255 820 • • 

13717 0.12 7255 820 • • • 

12470 0.14 7255 820 • • • 

11038 0.15 7255 820 • • • 

9245 0.18 7255 820 • • • 

7883 0.21 7255 820 • • • 

6700 0.25 7255 820 • • • 

5823 0.29 7255 820 • • • 

5068 0.33 7255 820 • • • 

4572 0.37 7255 820 • • • 

4282 0.39 7255 820 • 

3611 0.47 7255 820 • • 

3206 0.52 7255 820 • • 

2811 0.60 7255 820 • • • 

2515 0.67 7255 820 • • • 

2233 0.75 7255 820 • • • 

1957 0.86 7255 820 • • • 

1720 0.98 7255 820 • • • 

1554 1.10 7255 820 • • • • 

1354 1.20 7255 820 • • • 

1216 1.40 7255 820 • • • 

1098 1.50 7255 820 • • • • 

996 1.70 7255 820 • • • • 

906 1.90 7255 820 • • • • 

801 2.10 7255 820 • • • • 

740 2.30 7255 820 • • • • 

637 2.60 7255 820 • • • • 

579 2.90 7255 820 • • • • 

526 3.20 7255 820 • • • • 

477 3.50 7255 820 • • • • 

434 3.90 7255 820 • • • • 

384 4.40 7255 820 • • • • 

354 4.70 7255 820 • • • • 

305 5.50 7255 820 • • • • 

277 6.10 7255 820 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

K.68 

7255 lb in 



T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

243.72 7.2 7255 820 • • • 

215.68 8.1 7255 820 • • • • 

196.07 8.9 7255 820 • • • • 

176.14 9.9 7255 820 • • • • 

150.98 11.6 7255 820 • • • • • 

136.6 12.8 7255 820 • • • • • • 

126.09 13.9 7255 820 • • • • • • 

109.64 16.0 7255 820 • • • • • • • 

99.55 17.6 7255 820 • • • • • • • 

90.89 19.3 7255 820 • • • • • • • 

83.4 21.0 7255 820 • • • • • • • 

76.84 23.0 7255 820 • • • • • • • 

69.78 25.0 7255 820 • • • • • • • 

63.57 28.0 7255 820 • • • • • • • 

58.23 30.0 7255 820 • • • • • • • 

51.96 34.0 7255 820 • • • • • • • 

46.37 38.0 7255 820 • • • • • 

39.39 44.0 7255 820 • • • • • 

32.78 53.0 7255 820 • • • • • 

30.38 58.0 7255 820 • • • • • • • 

27.99 63.0 7255 820 • • • • • • • 

25.42 69.0 7255 820 • • • • • • • 

23.16 76.0 7255 820 • • • • • • • 

21.22 82.0 7255 820 • • • • • • • 

18.93 92.0 7255 820 • • • • • • • 

16.89 104.0 7255 820 • • • • • 

14.35 122.0 7184 812 • • • • • 

11.94 147.0 6795 768 • • • • • 

11.41 153.0 3840 434 • • • • • • • 

10.4 168.0 3733 422 • • • • • • • 

9.52 184.0 3636 411 • • • • • • • 

8.5 206.0 3512 397 • • • • • • • 

7.58 231.0 3388 383 • • • • • 

6.44 272.0 3229 365 • • • • • 

5.36 326.0 3052 345 • • • • • 

4 - 55




Gear Type 

K.88-D.28 

14599 lb in 

K.88-Z.28 

14599 lb in 


4 - 56 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

24920 0.07 14599 1 650 • 

21499 0.08 14599 1 650 • • 

18470 0.09 14599 1 650 • • 

17005 0.10 14599 1 650 • • • 

15459 0.11 14599 1 650 • • • 

13683 0.12 14599 1 650 • • • 

11460 0.15 14599 1 650 • • • 

9772 0.17 14599 1 650 • • • 

8306 0.20 14599 1 650 • • • 

7218 0.23 14599 1 650 • • • 

6283 0.27 14599 1 650 • • • 

5667 0.30 14599 1 650 • • • 

5309 0.32 14599 1 650 • 

4477 0.38 14599 1 650 • • 

3975 0.42 14599 1 650 • • 

3485 0.48 14599 1 650 • • • 

3118 0.54 14599 1 650 • • • 

2768 0.61 14599 1 650 • • • 

2426 0.69 14599 1 650 • • • 

2133 0.79 14599 1 650 • • • 

1926 0.87 14599 1 650 • • • • 

1679 1.00 14599 1 650 • • • 

1508 1.10 14599 1 650 • • • 

1361 1.20 14599 1 650 • • • • 

1234 1.40 14599 1 650 • • • • 

1123 1.50 14599 1 650 • • • • 

993 1.70 14599 1 650 • • • • 

917 1.80 14599 1 650 • • • • 

789 2.10 14599 1 650 • • • • 

718 2.30 14599 1 650 • • • • 

652 2.60 14599 1 650 • • • • 

591 2.80 14599 1 650 • • • • 

538 3.10 14599 1 650 • • • • 

476 3.50 14599 1 650 • • • • 

439 3.80 14599 1 650 • • • • 

378 4.40 14599 1 650 • • • • 

344 4.90 14599 1 650 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

K.88 

14599 lb in 



T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 

302.68 5.8 13625 1540 • • • • 

272.95 6.4 14599 1650 • • • • 

246.13 7.1 14599 1650 • • • • 

215.25 8.1 14599 1650 • • • • • 

193.24 9.1 14599 1650 • • • • • • 

176.5 9.9 14599 1650 • • • • • • 

156.63 11.2 14599 1650 • • • • • • • 

144.58 12.1 14599 1650 • • • • • • • 

130.77 13.4 14599 1650 • • • • • • • 

120.42 14.5 14599 1650 • • • • • • • 

111.37 15.7 14599 1650 • • • • • • • • 

103.38 16.9 14599 1650 • • • • • • • • 

91.22 19.2 14599 1650 • • • • • • • • 

84.21 21.0 14599 1650 • • • • • • • • 

75.45 23.0 14599 1650 • • • • • • • • 

69.57 25.0 14599 1650 • • • • • • 

58.37 30.0 14599 1650 • • • • • • 

49.8 35.0 14599 1650 • • • • • • 

41.5 42.0 14599 1650 • • • • 

34.4 51.0 14599 1650 • • • • 

30.87 57.0 14599 1650 • • • • • • • • 

28.5 61.0 14599 1650 • • • • • • • • 

25.53 69.0 14599 1650 • • • • • • • • 

23.54 74.0 14599 1650 • • • • • • 

19.75 89.0 13909 1572 • • • • • • 

16.85 104.0 13254 1498 • • • • • • 

14.04 125.0 12537 1417 • • • • 

11.64 150.0 11847 1339 • • • • 

11.21 156.0 7131 806 • • • • • • 

9.41 186.0 6759 764 • • • • • • 

8.03 218.0 6441 728 • • • • • • 

6.69 262.0 6096 689 • • • • 

5.54 316.0 5760 651 • • • • 

4 - 57




Gear Type 

K.108-D38 

26543 lb in 

K.108-Z38 

26543 lb in 

K.108-Z48 

26543 lb in 


4 - 58 

1) 


3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 

58914 0.30 26544 3 000 • • • 

52306 0.30 26544 3 000 • • • 

45858 0.40 26544 3 000 • • • • 

41037 0.40 26544 3 000 • • • • 

36423 0.50 26544 3 000 • • • • 

31918 0.50 26544 3 000 • • • • 

28064 0.60 26544 3 000 • • • • 

25354 0.70 26544 3 000 • • • • 

22093 0.80 26544 3 000 • • • • 

19842 0.90 26544 3 000 • • • • 

17913 0.10 26544 3 000 • • • • 

16241 0.11 26544 3 000 • • • • 

14778 0.12 26544 3 000 • • • • 

13066 0.13 26544 3 000 • • • • 

13556 0.13 26544 3 000 • • • 

12055 0.15 26544 3 000 • • • 

10457 0.17 26544 3 000 • • • • 

9771 0.18 26544 3 000 • • • • 

8593 0.20 26544 3 000 • • • • 

7526 0.23 26544 3 000 • • • • • 

6657 0.26 26544 3 000 • • • • • 

6033 0.29 26544 3 000 • • • • • 

5326 0.33 26544 3 000 • • • • • 

4804 0.36 26544 3 000 • • • • • 

4357 0.40 26544 3 000 • • • • • 

3970 0.44 26544 3 000 • • • • • 

3631 0.48 26544 3 000 • • • • • 

3247 0.54 26544 3 000 • • • • • 

2981 0.59 26544 3 000 • • • • • 

2687 0.65 26544 3 000 • • • • • 

2311 0.76 26544 3 000 • • • • • 

2060 0.85 26544 3 000 • • • • • 

1892 0.92 26544 3 000 • • • • • 

1705 1.03 26544 3 000 • • • • • 

1466 1.19 26544 3 000 • • • • • 

1343 1.30 26544 3 000 • • • • • • 

1233 1.42 26544 3 000 • • • • • • 

1136 1.54 26544 3 000 • • • • • • 

1031 1.70 26544 3 000 • • • • • • 

940 1.86 26544 3 000 • • • • • • 

861 2.03 26544 3 000 • • • • • • 

768 2.28 26544 3 000 • • • • • • 

685 2.55 26544 3 000 • • • • 

582 3.01 26544 3 000 • • • • 

485 3.61 26544 3 000 • • • • 

477 3.67 26544 3 000 • • • • • • 

426 4.11 26544 3 000 • • • • 

361 4.85 26544 3 000 • • • • 

301 5.81 26544 3 000 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

K. 108 



T 1 1) [Nm / lb in] 

5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 


(4 pol.) (SF=1) (SF=1) 140TC 180TC 210TC 250TC 

[-] [rpm] [lb in] [Nm] 80 90 100 112 132 160 180 

307.24 5.70 25712 2906 • • 

278.10 6.30 25039 2830 • • 

26544 lb in 243.47 7.20 26544 3000 • • • 

219.64 8.00 26544 3000 • • • • 

201.11 8.70 26544 3000 • • • • 

178.90 9.80 26544 3000 • • • • • 

163.51 10.70 26544 3000 • • • • • 

150.31 11.60 26544 3000 • • • • • 

138.87 12.60 26544 3000 • • • • • 

128.86 13.60 26544 3000 • • • • • • 

120.03 14.60 26544 3000 • • • • • • 

108.52 16.10 26544 3000 • • • • • • • 

99.90 17.50 26544 3000 • • • • • • • 

89.85 19.50 26544 3000 • • • • • • • 

82.90 21.00 26544 3000 • • • • • • • 

70.24 25.00 26544 3000 • • • • • • • 

61.22 29.00 26544 3000 • • • • • • • 

52.08 34.00 26544 3000 • • • • • 

44.44 39.00 26544 3000 • • • • • 

36.44 48.00 25057 2832 • • • • • 

33.87 52.00 26544 3000 • • • • • • • 

31.25 56.00 26544 3000 • • • • • • • 

26.48 66.00 25499 2882 • • • • • • • 

23.08 76.00 24455 2764 • • • • • • • 

19.63 89.00 23287 2632 • • • • • 

16.75 104.00 22199 2509 • • • • • 

13.74 127.00 20898 2362 • • • • • 

12.90 136.00 17147 1938 • • • • • • • 

10.97 160.00 16324 1845 • • • • • 

9.36 187.00 15563 1759 • • • • • 

7.68 228.00 14652 1656 • • • • • 

4 - 59




Gear Type 

K.128-D38 

41856 lb in 

K.128-Z38 

41856 lb in 

K.128-Z48 

41856 lb in 


4 - 60 

1) 


3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 

56640 0.03 41856 4 700 • • • 

50287 0.03 41856 4 700 • • • 

44087 0.04 41856 4 700 • • • • 

39453 0.04 41856 4 700 • • • • 

35017 0.05 41856 4 700 • • • • 

30686 0.06 41856 4 700 • • • • 

26980 0.06 41856 4 700 • • • • 

24375 0.07 41856 4 700 • • • • 

21240 0.08 41856 4 700 • • • • 

19076 0.09 41856 4 700 • • • • 

17221 0.10 41856 4 700 • • • • 

15614 0.11 41856 4 700 • • • • 

14208 0.12 41856 4 700 • • • • 

12562 0.14 41856 4 700 • • • • 

13032 0.13 41856 4 700 • • • 

11590 0.15 41856 4 700 • • • 

10054 0.17 41856 4 700 • • • • 

9394 0.19 41856 4 700 • • • • 

8262 0.21 41856 4 700 • • • • 

7236 0.24 41856 4 700 • • • • • 

6400 0.27 41856 4 700 • • • • • 

5800 0.30 41856 4 700 • • • • • 

5120 0.34 41856 4 700 • • • • • 

4619 0.38 41856 4 700 • • • • • 

4189 0.42 41856 4 700 • • • • • 

3817 0.46 41856 4 700 • • • • • 

3491 0.50 41856 4 700 • • • • • 

3121 0.56 41856 4 700 • • • • • 

2866 0.61 41856 4 700 • • • • • 

2583 0.68 41856 4 700 • • • • • 

2221 0.79 41856 4 700 • • • • • 

1981 0.88 41856 4 700 • • • • • 

1819 0.96 41856 4 700 • • • • • 

1639 1.07 41856 4 700 • • • • • 

1410 1.24 41856 4 700 • • • • • 

1400 1.25 41856 4 700 • • • • • • 

1284 1.36 41856 4 700 • • • • • • 

1183 1.48 41856 4 700 • • • • • • 

1074 1.63 41856 4 700 • • • • • • 

979 1.79 41856 4 700 • • • • • • 

897 1.95 41856 4 700 • • • • • • 

800 2.19 41856 4 700 • • • • • • 

714 2.45 41856 4 700 • • • • 

606 2.89 41856 4 700 • • • • 

505 3.47 41856 4 700 • • • • 

497 3.52 41856 4 700 • • • • • • 

443 3.95 41856 4 700 • • • • 

377 4.64 41856 4 700 • • • • 

313 5.59 41856 4 700 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

K.128 



T 1 1) [Nm / lb in] 

10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 291 / 2575 



[-] [rpm] [lb in] [Nm] 90 100 112 132 160 180 200 225 

295.38 5.9 41856 4 700 • • • 

270.9 6.5 41856 4 700 • • • 

41586 lb in 242.02 7.2 41856 4 700 • • • • 

221.64 7.9 41856 4 700 • • • • 

204.18 8.6 41856 4 700 • • • • 

189.04 9.3 41856 4 700 • • • • 

175.8 10.0 41856 4 700 • • • • • 

164.11 10.7 41856 4 700 • • • • • 

146.84 11.9 41856 4 700 • • • • • • • 

136.06 12.9 41856 4 700 • • • • • • • 

124.73 14.0 41856 4 700 • • • • • • • • 

114.34 15.3 41856 4 700 • • • • • • • • 

97.44 18.0 41856 4 700 • • • • • • • • 

85.98 20.0 41856 4 700 • • • • • • • • 

73.18 24.0 41856 4 700 • • • • • • • 

63.41 28.0 41856 4 700 • • • • • • • 

53.36 33.0 41856 4 700 • • • • • • • 

48.14 36.0 41856 4 700 • • • • • 

41.38 42.0 41856 4 700 • • • • • 

39.19 45.0 41856 4 700 • • • • • • • • 

35.92 49.0 41856 4 700 • • • • • • • • 

30.61 57.0 41856 4 700 • • • • • • • • 

27.02 65.0 41856 4 700 • • • • • • • • 

22.99 76.0 41856 4 700 • • • • • • • 

19.92 88.0 41856 4 700 • • • • • • • 

16.76 104.0 41856 4 700 • • • • • • • 

15.13 116.0 40931 4 626 • • • • • 

13 135.0 39099 4 419 • • • • • 

12.56 139.0 28464 3 217 • • • • • • • 

10.88 161.0 27261 3 081 • • • • • • • 

9.16 191.0 25872 2 924 • • • • • • • 

8.26 212.0 25075 2 834 • • • • • 

7.1 246.0 23952 2 707 • • • • • 

4 - 61




Gear Type 

K.148-D38 

70784 lb in 

K.148-Z38 

70784 lb in 

K.148-Z68 

70784 lb in 


4 - 62 

T 1) 


3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 

58692 0.03 70784 8 000 • • • 

52109 0.03 70784 8 000 • • • 

45684 0.04 70784 8 000 • • • • 

40882 0.04 70784 8 000 • • • • 

36286 0.05 70784 8 000 • • • • 

31797 0.06 70784 8 000 • • • • 

27958 0.06 70784 8 000 • • • • 

25258 0.07 70784 8 000 • • • • 

22009 0.08 70784 8 000 • • • • 

19767 0.09 70784 8 000 • • • • 

17845 0.10 70784 8 000 • • • • 

16180 0.11 70784 8 000 • • • • 

14722 0.12 70784 8 000 • • • • 

13017 0.13 70784 8 000 • • • • 

13505 0.13 70784 8 000 • • • 

12009 0.15 70784 8 000 • • • 

10418 0.17 70784 8 000 • • • • 

9734 0.18 70784 8 000 • • • • 

8561 0.20 70784 8 000 • • • • 

7498 0.23 70784 8 000 • • • • • 

6632 0.26 70784 8 000 • • • • • 

6010 0.29 70784 8 000 • • • • • 

5305 0.33 70784 8 000 • • • • • 

4786 0.37 70784 8 000 • • • • • 

4341 0.40 70784 8 000 • • • • • 

3955 0.44 70784 8 000 • • • • • 

3617 0.48 70784 8 000 • • • • • 

3234 0.54 70784 8 000 • • • • • 

2970 0.59 70784 8 000 • • • • • 

2677 0.65 70784 8 000 • • • • • 

2302 0.76 70784 8 000 • • • • • 

2053 0.85 70784 8 000 • • • • • 

1885 0.93 70784 8 000 • • • • • 

1699 1.03 70784 8 000 • • • • • 

1466 1.20 70784 8 000 • • • • • 

1392 1.26 70784 8 000 • • • • • • • 

1247 1.40 70784 8 000 • • • • • • • 

1150 1.52 70784 8 000 • • • • • 

965 1.81 70784 8 000 • • • • • 

823 2.13 70784 8 000 • • • • • 

686 2.55 70784 8 000 • • • 

569 3.08 70784 8 000 • • • 

502 3.49 70784 8 000 • • • • • 

428 4.09 70784 8 000 • • • • • 

357 4.90 70784 8 000 • • • 

296 5.91 70784 8 000 • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

K.148 

70784 lb in 



T 1 1) [Nm / lb in] 

20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 291 / 2575 356 / 3150 


(4 pol.) (SF=1) (SF=1) 180TC 210TC 250TC 280TC 320TC 360 TC 

[-] [rpm] [lb in] [Nm] 100 112 132 160 180 200 225 250 

306.08 5.7 70784 8 000 • • 

274.42 6.4 70784 8 000 • • • 

251.55 7.0 70784 8 000 • • • 

231.95 7.5 70784 8 000 • • • 

214.96 8.1 70784 8 000 • • • 

204.38 8.6 70784 8 000 • • • • 

191.02 9.2 70784 8 000 • • • • 

168.5 10.4 70784 8 000 • • • • • • 

158.93 11.0 70784 8 000 • • • • • • 

142.41 12.3 70784 8 000 • • • • • • • 

131.49 13.3 70784 8 000 • • • • • • • 

112.35 15.6 70784 8 000 • • • • • • • • 

101.53 17.2 70784 8 000 • • • • • • • • 

97.82 17.9 70784 8 000 • • • • • • • 

84.61 21.0 70784 8 000 • • • • • • • • 

73.8 24.0 70784 8 000 • • • • • • • • 

63.16 28.0 70784 8 000 • • • • • • • • 

56.57 31.0 70784 8 000 • • • • • • 

47.91 37.0 70784 8 000 • • • • • • 

41.38 42.0 70784 8 000 • • • • • 

31.1 56.0 70784 8 000 • • • • • 

30.74 57.0 70784 8 000 • • • • • • • 

26.58 66.0 70784 8 000 • • • • • • • • 

23.19 75.0 70784 8 000 • • • • • • • • 

19.84 88.0 70784 8 000 • • • • • • • • 

17.77 98.0 70784 8 000 • • • • • • 

15.05 116.0 67271 7 603 • • • • • • 

13 135.0 64352 7 273 • • • • • 

9.77 179.0 59016 6 670 • • • • • 

8.79 199.0 35215 3 980 • • • • • • 

7.44 235.0 33490 3 785 • • • • • • 

6.43 272.0 32030 3 620 • • • • • 

4.83 362.0 29375 3 320 • • • • • 

4 - 63




Gear Type 

K.168-D48 

119448 lb in 

K.168-Z48 

119448 lb in 

K.168-Z68 

119448 lb in 


4 - 64 

1) 


3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 

60115 0.03 119448 13 500 • • • 

53459 0.03 119448 13 500 • • • 

46374 0.04 119448 13 500 • • • • 

43330 0.04 119448 13 500 • • • • 

38109 0.05 119448 13 500 • • • • 

33375 0.05 119448 13 500 • • • • • 

29521 0.06 119448 13 500 • • • • • 

26754 0.07 119448 13 500 • • • • • 

23617 0.07 119448 13 500 • • • • • 

21304 0.08 119448 13 500 • • • • • 

19323 0.09 119448 13 500 • • • • • 

17605 0.10 119448 13 500 • • • • • 

16102 0.11 119448 13 500 • • • • • 

14397 0.12 119448 13 500 • • • • • 

14767 0.12 119448 13 500 • • • 

13068 0.13 119448 13 500 • • • • 

11880 0.15 119448 13 500 • • • • 

10673 0.16 119448 13 500 • • • • 

9148 0.19 119448 13 500 • • • • • 

8277 0.21 119448 13 500 • • • • • • 

7640 0.23 119448 13 500 • • • • • • 

6643 0.26 119448 13 500 • • • • • • 

6032 0.29 119448 13 500 • • • • • • 

5507 0.32 119448 13 500 • • • • • • 

5053 0.35 119448 13 500 • • • • • • 

4656 0.38 119448 13 500 • • • • • • 

4228 0.41 119448 13 500 • • • • • • 

3852 0.45 119448 13 500 • • • • • • 

3528 0.50 119448 13 500 • • • • • • 

3148 0.56 119448 13 500 • • • • • • 

2810 0.62 119448 13 500 • • • • • • 

2386 0.73 119448 13 500 • • • • • • 

1986 0.88 119448 13 500 • • • • • • 

1955 0.90 119448 13 500 • • • • • • 

1745 1.00 119448 13 500 • • • • 

1482 1.18 119448 13 500 • • • • 

1233 1.42 119448 13 500 • • • • 

1033 1.69 119448 13 500 • • • • • 

881 1.99 119448 13 500 • • • • • 

735 2.38 119448 13 500 • • • 

609 2.87 119448 13 500 • • • 

537 3.26 119448 13 500 • • • • • 

458 3.82 119448 13 500 • • • • • 

382 4.58 119448 13 500 • • • 

317 5.52 119448 13 500 • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 

K.168 



T 1 1) [Nm / lb in] 

61 / 540 98 / 867 198 / 1752 198 / 1752 291 / 2575 356 / 3150 580 / 5132 1290 / 11414 


(4 pol.) (SF=1) (SF=1) 210TC 250TC 280TC 320TC 360TC 

[-] [rpm] [lb in] [Nm] 132 160 180 200 225 250 280 315 

287.95 6.1 119448 13 500 • 

264.18 6.6 119448 13 500 • 

119448 lb in 243.8 7.2 119448 13 500 • 

226.15 7.7 119448 13 500 • 

213.33 8.2 119448 13 500 • • 

199.54 8.8 119448 13 500 • • 

177.43 9.9 119448 13 500 • • • • 

167.5 10.4 119448 13 500 • • • • 

150.36 11.6 119448 13 500 • • • • • 

138 12.7 119448 13 500 • • • • • 

119.09 14.7 119448 13 500 • • • • • • 

104.18 16.8 119448 13 500 • • • • • • 

90.6 19.3 119448 13 500 • • • • • • 

79.49 22.0 119448 13 500 • • • • • • 

67.22 26.0 119448 13 500 • • • • • • 

60.99 29.0 119448 13 500 • • • • • • 

53.18 33.0 119448 13 500 • • • • • • 

45.15 39.0 119448 13 500 • • • • • 

34.55 51.0 119448 13 500 • • • • • • 

32.53 54.0 119448 13 500 • • • • • • • 

28.54 61.0 119448 13 500 • • • • • • • 

24.14 72.0 119448 13 500 • • • • • • • 

21.9 80.0 115784 13 086 • • • • • • • 

19.09 92.0 111068 12 553 • • • • • • • 

16.21 108.0 105698 11 946 • • • • • • 

12.41 141.0 97469 11 016 • • • • • • 

11.67 150.0 61697 6 973 • • • • • • • 

10.17 172.0 59184 6 689 • • • • • • • 

8.64 203.0 56326 6 366 • • • • • • 

6.61 265.0 51937 5 870 • • • • • • 

4 - 65




Gear Type 

K.188-D68 

176960 lb in 

K.188-Z68 

176960 lb in 

K.188-Z88 

176960 lb in 


4 - 66 

T 1) 


3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 

53767 0.03 176960 20 000 • • • 

47582 0.04 176960 20 000 • • • • 

43256 0.04 176960 20 000 • • • • 

38858 0.05 176960 20 000 • • • • 

33307 0.05 176960 20 000 • • • • • 

30135 0.06 176960 20 000 • • • • • 

27817 0.06 176960 20 000 • • • • • 

24187 0.07 176960 20 000 • • • • • 

21961 0.08 176960 20 000 • • • • • 

20052 0.09 176960 20 000 • • • • • 

18398 0.10 176960 20 000 • • • • • 

16951 0.10 176960 20 000 • • • • • 

15394 0.11 176960 20 000 • • • • • 

14024 0.12 176960 20 000 • • • • • 

12847 0.14 176960 20 000 • • • • • 

11463 0.15 176960 20 000 • • • • • 

10230 0.17 176960 20 000 • • • 

8689 0.20 176960 20 000 • • • 

9201 0.19 176960 20 000 • • • • 

8047 0.22 176960 20 000 • • • • • 

7224 0.24 176960 20 000 • • • • • • 

6598 0.27 176960 20 000 • • • • • • 

5855 0.30 176960 20 000 • • • • • • • 

5405 0.32 176960 20 000 • • • • • • • 

4889 0.36 176960 20 000 • • • • • • • 

4502 0.39 176960 20 000 • • • • • • • 

4163 0.42 176960 20 000 • • • • • • • 

3865 0.45 176960 20 000 • • • • • • • 

3410 0.51 176960 20 000 • • • • • • • 

3148 0.56 176960 20 000 • • • • • • • 

2821 0.62 176960 20 000 • • • • • • • 

2601 0.67 176960 20 000 • • • • • 

2182 0.80 176960 20 000 • • • • • 

1862 0.94 176960 20 000 • • • • • 

1551 1.10 176960 20 000 • • • 

1286 1.40 176960 20 000 • • • 

1135 1.50 176960 20 000 • • • • • 

968 1.80 176960 20 000 • • • • • 

807 2.20 176960 20 000 • • • 

669 2.60 176960 20 000 • • • 

669 2.6 176960 20 000 • • • • 

548 3.2 176960 20 000 • • • • 

503 3.5 176960 20 000 • • • • 

429 4.1 176960 20 000 • • • • 

352 5.0 176960 20 000 • • • • 

321 5.5 176960 20 000 • • • • 

274 6.4 176960 20 000 • • • • 

225 7.8 176960 20 000 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Type 



T 1 1) [Nm / lb in] 

61 / 540 98 / 867 198 / 1752 198 / 1752 291 / 2575 356 / 3150 580 / 51321290 / 11414 


(4 pol.) (SF=1) (SF=1) 210TC 250TC 280TC 320TC 360TC 

[-] [rpm] [lb in] [Nm] 132 160 180 200 225 250 280 315 

K. 188 191.34 9.1 176960 20 000 • • • • • 

172.78 

176960 lb in 

161.92 

10.1 

10.8 

176960 

176960 

20 000 

20 000 • 

• 

• 

• 

• 

• 

• • 

139.08 12.6 176960 20 000 • • • • • 

120.16 14.6 176960 20 000 • • • • • • • 

106.07 16.5 176960 20 000 • • • • • • • 

95.48 18.3 176960 20 000 • • • • • • • 

79.23 22.0 176960 20 000 • • • • • • • 

72.24 24.0 176960 20 000 • • • • • • • 

63.38 28.0 176960 20 000 • • • • • • • 

54.47 32.0 176960 20 000 • • • • • • • 

42.43 41.0 176960 20 000 • • • • • • • 

34.28 51.0 176960 20 000 • • • • • • • 

28.45 62.0 176960 20 000 • • • • • • • 

25.94 67.0 176960 20 000 • • • • • • • 

22.76 77.0 176960 20 000 • • • • • • • 

19.56 89.0 176960 20 000 • • • • • • • 

15.23 115.0 168112 19 000 • • • • • • • 

12.10 145.0 154840 17 500 • • • • • • 

4 - 67



Improvement of Sealing Quality K.38-168 


4 - 68 

Housing 

4 

2 

Shaft 

4 

1 

3 

3 








B.28, B.38 und K.188 double sealing optional. 

The position of the plug screw is shown in the dimension sheets for the horizontal mounting position (B3, B5). When running the gear 

box, in sizes K.48 ... K.188 a breather must replace the plug screw. The breather dimensions are as follows. 


(0.79”) 

20 

K. 48 ... 128 K. 148 ... 188 

ø27 

(ø1.06”) 

ø22 

(ø0.87”) 

4 

(0.16”) 

(0.95”) 

24 

ø32 

(ø1.26”) 

ø32 

(ø1.26”) 

4 

(0.16”) 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Flange mounted (A-Type) 


Detail inner outline 

Design reference for the appearance of the customer side e.g. for plug-in shaft at hollow shaft configuration. 

Types øBD1 øBI1 øBI2 LI1 

[mm] [inch] [mm] [inch] [mm] [inch] [mm] [inch] 

B.F28 120 4.72 70 2.76 72 2.84 24 0.95 

B.F28 160 6.30 70 2.76 103 4.06 8.5 0.34 

B.F38 160 6.30 95 3.74 98 3.86 27 1.06 

B.F38 200 7.87 84 3.31 90 3.54 22.5 0.89 

K.F38 160 6.30 70 2.76 77 3.03 20 0.79 

K.F48 200 7.87 84 3.31 90 3.54 22.5 0.89 

K.F68 250 9.84 96 3.78 96 3.78 - - 

K.F88 300 11.81 126 4.96 138 5.43 31 1.22 

K.F108 350 13.78 176 6.93 185 7.28 32 1.26 

K.F128 450 17.72 226 8.90 234 9.21 38.5 1.52 

K.F148 450 17.72 246 9.69 262 10.31 34 1.34 

K.F168 550 21.65 296 11.65 313 12.32 39 1.54 

K . F188 660 25.98 296 11.65 296 11.65 - - 

4 - 69


Pin holes 

With housing flange ( C-Type ) for sizes K.Z.108-188, the output side can be pinned. 


connection. 



4 - 70 

K.Z. 108 K.Z. 128 




K.Z.148 K.Z.168, K.Z.188 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Helical Bevel Gear Units 

Cover B-Side (optional) 

Inch 

KA, KAS 1) , KAT Dimensions in mm 

Model Steel cover Casting cover 

PA PG8 PH8* PH8 PG6 PH6 PH7* 

K.38 - - - - - - - 

K.48 

3.90 

99 

5.12 

130 

1.73 

44 

1.73 

44 

5.20 

132 

0.39 

10 

1.30 

33 

K.68 

4.53 

115 

5.91 

150 

2.46 

62.5 

2.72 

69 

5.91 

150 

0.39 

10 

1.46 

37 

K.88 

5.39 

137 

7.48 

190 

2.76 

70 

2.76 

70 

7.48 

190 

0.51 

13 

1.97 

50 

K.108 

7.36 

187 

9.45 

240 

3.15 

80 

3.62 

92 

9.65 

245 

0.51 

13 

2.17 

55 

K.128 

9.17 

233 

11.50 

292 

3.35 

85 

3.82 

97 

11.61 

295 

0.63 

16 

1.89 

48 

K.148 

10.14 

257.5 

13.15 

334 

3.94 

100 

4.45 

113 

13.19 

335 

0.51 

13 

1.97 

50 

K.168 

12.19 

309.5 

15.35 

390 

5.10 

129.5 

6.08 

154.5 

15.75 

400 

0.51 

13 

1.97 

50 

12.19 15.35 5.10 5.10 15.75 0.51 1.97 

K.188 

309.5 390 129.5 129.5 400 13 50 

BAF, BAZ, BAFS, BAZS, BAFT, BAZT, KAF, KAZ, KAFS 1) , KAZS 1) , KAFT, KAZT 


PA PG8 PH8 PG6 PH6 PH7 

B. 28 

2.28 

58 

4.02 

102 

1.42 

36 

- - - 

B. 38 

3.90 

99 

5.12 

130 

1.73 

44 

5.20 

132 

0.39 

10 

1.30 

33 

K. 38 

3.24 

82.2 

4.53 

115 

1.57 

40 

4.72 

120 

0.39 

10 

1.30 

33 

K. 48 

3.90 

99 

5.12 

130 

1.73 

44 

5.20 

132 

0.39 

10 

1.30 

33 

K. 68 

4.53 

115 

5.91 

150 

2.46 

62.5 

5.91 

150 

0.39 

10 

1.46 

37 

K. 88 

5.39 

137 

7.48 

190 

2.76 

70 

7.48 

190 

0.51 

13 

1.97 

50 

K.108 

7.36 

187 

9.45 

240 

3.15 

80 

9.65 

245 

0.51 

13 

2.17 

55 

K.128 

9.17 

233 

11.50 

292 

3.35 

85 

11.61 

295 

0.63 

16 

1.89 

48 

K.148 

10.14 

257.5 

13.15 

334 

3.94 

100 

13.19 

335 

0.51 

13 

1.97 

50 

K.168 

12.19 

309.5 

15.35 

390 

5.10 

129.5 

15.75 

400 

0.51 

13 

1.97 

50 

K. 188 

12.19 

309.5 

15.35 

390 

5.10 

129.5 

15.75 

400 

0.51 

13 

1.97 

50 

casting 


Cover not usable with backstop KX. 

1) For KAS, KADS, KAFS and KAZS only steel protection cover is possible. PH7*/PH8* = protection cover 

For size 28 protection cover is standard. PH7/PH8 = protection provided with sealing 

steel 

casting 

steel 

4 - 71



4 - 72 

Typ(e) Dimension sheet see page 

B28 / BZ28 4 - 76 

B38 / BZ38 4 - 86 

K38 4 - 96 

K48 4 - 108 

K68 4 - 120 

K88 4 - 132 

K108 4 - 144 

K128 4 - 156 

K148 4 - 168 

K168 4 - 180 

K188 4 - 192 

BF28 4 - 78 

BF38 4 - 88 

KF38 4 - 98 

KF48 4 - 110 

KF68 4 - 122 

KF88 4 - 134 

KF108 4 - 146 

KF128 4 - 158 

KF148 4 - 170 

KF168 4 - 182 

KF188 4 - 194 

BA28 / BAZ28 4 - 80 

BA38 / BAZ38 4 - 90 

KA38 4 - 100 

KA48 4 - 112 

KA68 4 - 124 

KA88 4 - 136 

KA108 4 - 148 

KA128 4 - 160 

KA148 4 - 172 

KA168 4 - 184 

KA188 4 - 196 

BAD28 4 - 82 

BAD38 4 - 92 

KAD38 4 - 102 

KAD48 4 - 114 

KAD68 4 - 126 

KAD88 4 - 138 

KAD108 4 - 150 

KAD128 4 - 162 

KAD148 4 - 174 

KAD168 4 - 186 

KAD188 4 - 198 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




BAF28 4 - 84 

BAF38 4 - 94 

KAF38 4 - 104 

KAF48 4 - 116 

KAF68 4 - 128 

KAF88 4 - 140 

KAF108 4 - 152 

KAF128 4 - 164 

KAF148 4 - 176 

KAF168 4 - 188 

KAF188 4 - 200 

KAZ38 4 - 106 

KAZ48 4 - 118 

KAZ68 4 - 130 

KAZ88 4 - 142 

KAZ108 4 - 154 

KAZ128 4 - 166 

KAZ148 4 - 178 

KAZ168 4 - 190 

KAZ188 4 - 202 

Available Output solid shaft 4 - 204 

Available Output hollow shaft 4 - 205 

KA.S38 ... KA.S188 4 - 207 

4 - 73



4 - 74 


K. 38-Z28 ... K. 188-Z68 4 - 208 

K.M 88 ... K.M 168 4 - 212 

K.E 68 ... K.E 168 4 - 214 

K.X 88 ... K.X 168 4 - 218 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


4 - 75


Bevel Helical Gear Motors 

Foot mounted 

Housing flange (C-type) 

B28 

BZ28 

Mounting 


4.02 2.91 3.39 0.12 M8x16 

Output Shaft 

U V V3 VO UY Y BA EA TAP M 

0.75 1.57 1.25 0.01 0.83 0.1875 2.17 100 1/4-20UNC 

Gearcase 

FA F B2 G B D FC FB DB J QC QB WG X H P2 PB1 

1.38 3.54 1.77 0.31 4.13 2.48 1.38 1.38 1.4 0.98 2.48 4.57 2.17 4.21 0.35 3.03 4.57 

Motor 

B/BZ28 

Motor C CB P AB AA Weight [lb] 

LA71 15.02 17.19 5.47 5.75 1/2" + 3/4" 22 

LA71Z 15.77 17.93 5.47 5.75 1/2" + 3/4" 22 

LA90S 18.84 21.63 6.85 6.42 1/2" + 3/4" 44 

LA90Z 20.61 23.41 6.85 6.42 1/2" + 3/4" 49 


4 - 76 

B 510 

BZ 510 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 


B28 

BZ28 

Mounting 


102 74 86 3 M8x16 

Output Shaft 


19,05 40 31,75 0,254 21,082 4,763 55 100 1/4“-20UNC 


B 510 

BZ 510 

[mm] 

Gearcase 


35 90 45 8 105 63 35 35 35,5 25 63 116 55 107 9 77 116 

Motor 

B/BZ28 

Motor C CB P AB AA Weight [kg] 

LA71 381.5 436.5 139.0 146.0 1/2" + 3/4" 10 

LA71Z 400.5 455.5 139.0 146.0 1/2" + 3/4" 10 

LA90S 478.5 549.5 174.0 163.0 1/2" + 3/4" 20 

LA90Z 523.5 594.5 174.0 163.0 1/2" + 3/4" 22 


4 - 77




BF28 BF 510 

[inch] 

Flange 

BD AK GA AJ BB BF D3 

4.72 3.15 0.31 3.94 0.12 0.25 - 

6.3 4.33 0.35 5.12 0.14 0.35 5,35 

Output Shaft 

U V V3 VO UY Y AM EA TAP M 

0.75 1.57 1.25 0.01 0.83 0.1875 1.57 4.72 1/4-20UNC 

Gearcase 

BDB FA F AKB AJB B2 G B BBB D FC FB DB J QC QB WG X H P2 PB1 TAP BFB 

4.02 1.38 3.54 2.91 3.39 1.77 0.31 4.13 0.12 2.48 1.38 1.38 1.4 0.98 2.48 4.57 2.17 4.21 0.35 3.03 4.57 M8x16 

Motor 

BF28 


LA71 15.02 17.19 5.47 5.75 1/2" + 3/4" 22 

LA71Z 15.77 17.93 5.47 5.75 1/2" + 3/4" 22 

LA90S 18.84 21.63 6.85 6.42 1/2" + 3/4" 44 

LA90Z 20.61 23.41 6.85 6.42 1/2" + 3/4" 51 


4 - 78 

BD = 6.3" 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 

BD AK GA AJ BB BF D3 

120 80 8 100 3 6,6 - 

160 110 9 130 3,5 9 136 

Output Shaft 


19,05 40 31,75 0,254 21,082 4,763 40 120 1/4-20UNC 


BF28 BF 510 

[mm] 

Gearcase 


102 35 90 74 86 45 8 105 3 63 35 35 35,5 25 63 116 55 107 9 77 116 M8x16 

Motor 

BF28 


LA71 381.5 436.5 139.0 146.0 1/2" + 3/4" 10 

LA71Z 400.5 455.5 139.0 146.0 1/2" + 3/4" 10 

LA90S 478.5 549.5 174.0 163.0 1/2" + 3/4" 20 

LA90Z 523.5 594.5 174.0 163.0 1/2" + 3/4" 23 


BD = 160mm 

4 - 79



Shaft mounted 

Shaft mounted with housing flange (C-type) 

BA28 

BAZ28 

Mounting 


4.02 2.91 3.39 0.12 M8x16 

Output Shaft 

U UF VC VG VH VL M BOLT UY Y EA EB Q1 

0.75 1.575 4.724 4.173 1.047 3.74 1/2-13UNC 0.847 0.188 2.36 1.575 2.44 

Gearcase 


1.38 3.54 1.77 0.31 4.13 2.48 1.38 1.38 1.4 0.98 2.48 4.57 2.17 4.21 0.35 3.03 4.57 

Motor 

BA.28 


LA71 15.02 17.19 5.47 5.75 1/2" + 3/4" 22 

LA71Z 15.77 17.93 5.47 5.75 1/2" + 3/4" 22 

LA90S 18.84 21.63 6.85 6.42 1/2" + 3/4" 42 

LA90Z 20.61 23.41 6.85 6.42 1/2" + 3/4" 49 


4 - 80 

BA 510 

BAZ 510 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


BA28 

BAZ28 

Mounting 


102 74 86 3 M8x16 


Output Shaft 


19,05 40 119,99 106 26,6 95 1/2“-13UNC 21,51 4,775 60 40 62 

Gearcase 


35 90 45 8 105 63 35 35 35,5 25 63 116 55 107 9 77 116 

Motor 

BA 510 

BAZ 510 

[mm] 

BA.28 


LA71 381.5 436.5 139.0 146.0 1/2" + 3/4" 10 

LA71Z 400.5 455.5 139.0 146.0 1/2" + 3/4" 10 

LA90S 478.5 549.5 174.0 163.0 1/2" + 3/4" 19 

LA90Z 523.5 594.5 174.0 163.0 1/2" + 3/4" 22 


4 - 81



Shaft mounted with torque arm 

BAD28 BAD 510 

[inch] 

Mounting Output Shaft 

BDB AKB AJB BBB WG TAP BFB U UF VC VG VH VL M BOLT UY Y EA EB Q1 

4.02 2.91 3.39 0.12 2.17 M8x16 0.75 1.575 4.724 4.173 1.047 3.74 1/2-13UNC 0.847 0.188 2.36 1.575 2.44 

Gearcase Torque Arm 

F G B D DB J B2 P2 PB1 FC FB QC QB X H FV GF SB UGF FW WF XF 

3.54 0.31 4.13 2.48 1.4 0.98 1.77 3.03 4.57 1.38 1.38 2.48 4.57 4.21 0.35 0.51 0.43 4.33 0.98 2.52 2.62 2.40 

Motor 

BAD28 


LA71 15.02 17.19 5.47 5.75 1/2" + 3/4" 22 

LA71Z 15.77 17.93 5.47 5.75 1/2" + 3/4" 22 

LA90S 18.84 21.63 6.85 6.42 1/2" + 3/4" 42 

LA90Z 20.61 23.41 6.85 6.42 1/2" + 3/4" 49 


4 - 82 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




BAD28 BAD 510 

[mm] 


BDB AKB AJB BBB WG TAP BFB U UF VC VG VH VL M BOLT UY Y EA EB Q1 

102 74 86 3 55 M8x16 19,05 40 120 106 26,6 95 1/2“-13UNC 21,51 4,775 60 40 62 


F G B D DB J B2 P2 PB1 FC FB QC QB X H FV GF SB UGF FW WF XF 

90 8 105 63 35,5 25 45 77 116 35 35 63 116 107 9 13 11 110 25 64 66,5 61 

Motor 

BAD28 


LA71 381.5 436.5 139.0 146.0 1/2" + 3/4" 10 

LA71Z 400.5 455.5 139.0 146.0 1/2" + 3/4" 10 

LA90S 478.5 549.5 174.0 163.0 1/2" + 3/4" 19 

LA90Z 523.5 594.5 174.0 163.0 1/2" + 3/4" 22 


4 - 83



Shaft mounted with flange 

BAF28 BAF 510 

[inch] 

Flange 

BD AK GA AJ BB XF TAP BF 

4.72 3.15 0.31 3.94 0.12 3.15 0.26 

6.3 4.33 0.35 5.12 0.14 3.15 0.35 

Output Shaft 


0.75 1.575 4.724 4.173 1.047 3.74 1/2-13UNC 0.847 0.188 2.36 1.575 2.44 

Gearcase 


4.02 1.38 3.54 2.91 3.39 1.77 0.31 4.13 0.12 2.48 1.38 1.38 1.4 0.98 2.48 4.57 2.17 4.21 0.35 3.03 4.57 M8x16 

Motor 

BAF28 


LA71 15.02 17.19 5.47 5.75 1/2" + 3/4" 22 

LA71Z 15.77 17.93 5.47 5.75 1/2" + 3/4" 22 

LA90S 18.84 21.63 6.85 6.42 1/2" + 3/4" 42 

LA90Z 20.61 23.41 6.85 6.42 1/2" + 3/4" 49 


4 - 84 

BD = 6.3" 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


120 80 8 100 3 80 6,6 

160 110 9 130 3,5 80 9 


BAF28 BAF 510 

[mm] 

Output Shaft 


19,05 40 119,99 106 26,6 95 1/2“-13UNC 21,51 4,775 60 95 62 

Gearcase 


102 35 90 74 86 45 8 105 3 63 35 35 35,5 25 63 116 55 107 9 77 116 M8x16 

Motor 

BAF28 


LA71 381.5 436.5 139.0 146.0 1/2" + 3/4" 10 

LA71Z 400.5 455.5 139.0 146.0 1/2" + 3/4" 10 

LA90S 478.5 549.5 174.0 163.0 1/2" + 3/4" 19 

LA90Z 523.5 594.5 174.0 163.0 1/2" + 3/4" 22 


BD = 160mm 

4 - 85



Foot mounted 


B38 

BZ38 

Mounting 


5.2 3.74 4.53 0.12 M10x17 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 2.76 120 3/8-16UNC 

Gearcase 

FA F JE G B D FC FB DB J QC QB WG X H 

1.97 3.94 2.68 0.43 4.72 3.15 1.97 1.97 1.46 1.26 3.15 6.65 2.56 5.18 0.35 

Motor 

B.38 


LA71 18.98 21.14 5.47 5.75 1/2" + 3/4" 46 

LA71Z 19.72 21.89 5.47 5.75 1/2" + 3/4" 46 

LA80 20.43 22.93 6.16 6.10 1/2" + 3/4" 57 

LA90S 21.65 24.45 6.85 6.42 1/2" + 3/4" 68 

LA90Z 23.43 26.22 6.85 6.42 1/2" + 3/4" 68 

LA100Z 26.22 29.41 7.68 6.61 2 x 3/4" 88 


4 - 86 

B 510 

BZ 510 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 


B38 

BZ38 

Mounting 


132 95 115 3 M10x17 

Output Shaft 


25,4 50 38,1 6,401 28,194 6,35 70 120 3/8“-16UNC 


Gearcase 


50 100 68 11 120 80 50 50 37 32 80 169 65 131,5 9 

B 510 

BZ 510 

[mm] 

Motor 

B.38 


LA71 482.0 537.0 139.0 146.0 1/2" + 3/4" 21 

LA71Z 501.0 556.0 139.0 146.0 1/2" + 3/4" 21 

LA80 519.0 582.5 156.5 155.0 1/2" + 3/4" 26 

LA90S 550.0 621.0 174.0 163.0 1/2" + 3/4" 31 

LA90Z 595.0 666.0 174.0 163.0 1/2" + 3/4" 31 

LA100Z 666.0 747.0 195.0 168.0 2 x 3/4" 40 


4 - 87




BF38 BF 510 

[inch] 

Flange 


6.3 4.33 0.39 5.12 0.12 0.35 

7.87 5.12 0.47 6.5 0.14 0.43 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 1.97 4.72 3/8-16UNC 

Gearcase 

BDB FA F AKB AJB JE G B BBB D FC FB DB J QC QB WG X H TAP BFB 

5.2 1.97 3.94 3.74 3.74 2.68 0.43 4.72 0.12 3.15 1.97 1.97 1.46 1.26 3.15 6.65 2.56 5.18 0.35 M10x17 

Motor 

BF38 


LA71 18.98 21.14 5.47 5.75 1/2" + 3/4" 51 

LA71Z 19.72 21.89 5.47 5.75 1/2" + 3/4" 51 

LA80 20.43 22.93 6.16 6.10 1/2" + 3/4" 62 

LA90S 21.65 24.45 6.85 6.42 1/2" + 3/4" 71 

LA90Z 23.43 26.22 6.85 6.42 1/2" + 3/4" 71 

LA100Z 26.22 29.41 7.68 6.61 2 x 3/4" 90 


4 - 88 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


160 110 10 130 3 9 

200 130 12 165 3,5 11 

Output Shaft 


25,4 50 38,1 6,401 28,194 6,35 50 120 3/8-16UNC 


BF38 BF 510 

[mm] 

Gearcase 


132 50 100 95 115 68 11 120 3 80 50 50 37 32 80 169 65 131,5 9 M10x17 

Motor 

BF38 


LA71 482.0 537.0 139.0 146.0 1/2" + 3/4" 23 

LA71Z 501.0 556.0 139.0 146.0 1/2" + 3/4" 23 

LA80 519.0 582.5 156.5 155.0 1/2" + 3/4" 28 

LA90S 550.0 621.0 174.0 163.0 1/2" + 3/4" 32 

LA90Z 595.0 666.0 174.0 163.0 1/2" + 3/4" 32 

LA100Z 666.0 747.0 195.0 168.0 2 x 3/4" 41 


4 - 89



Shaft mounted 


BA38 

BAZ38 

Mounting 


5.2 3.74 4.53 0.12 M10x17 

Output Shaft 


1.25 1.969 5.512 4.646 1.465 3.937 3/8-1 3/4UNC 1.377 0.25 2.76 2.126 2.85 

Gearcase 


1.97 3.94 2.68 0.43 4.72 3.15 1.97 1.97 1.46 1.26 3.15 6.65 2.56 5.18 0.35 

Motor 

4 - 90 

BA 510 

BAZ 510 

[inch] 

BA.38 


LA71 18.98 21.14 5.47 5.75 1/2" + 3/4" 46 

LA71Z 19.72 21.89 5.47 5.75 1/2" + 3/4" 46 

LA80 20.43 22.93 6.16 6.10 1/2" + 3/4" 57 

LA90S 21.65 24.45 6.85 6.42 1/2" + 3/4" 66 

LA90Z 23.43 26.22 6.85 6.42 1/2" + 3/4" 66 

LA100Z 26.22 29.41 7.68 6.61 2 x 3/4" 86 


(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


BA38 

BAZ38 

Mounting 


132 95 115 3 M10x17 


Output Shaft 


31,75 50 140 118 37,2 100 3/8“-1 3/4“UNC 34,98 6,35 70 54 72,5 

Gearcase 


50 100 68 11 120 80 50 50 37 32 80 169 65 131,5 9 

BA 510 

BAZ 510 

[mm] 

BA.38 


LA71 482.0 537.0 139.0 146.0 1/2" + 3/4" 21 

LA71Z 501.0 556.0 139.0 146.0 1/2" + 3/4" 21 

LA80 519.0 582.5 156.5 155.0 1/2" + 3/4" 26 

LA90S 550.0 621.0 174.0 163.0 1/2" + 3/4" 30 

LA90Z 595.0 666.0 174.0 163.0 1/2" + 3/4" 30 

LA100Z 666.0 747.0 195.0 168.0 2 x 3/4" 39 


4 - 91




BAD38 BAD 510 

[inch] 


BD AK AJ BB WG TAP BF U UF VC VG VH VL M BOLT UY Y EA EB Q1 

5.2 3.74 4.53 0.12 2.56 M10x17 1.25 1.969 5.512 4.646 1.465 3.937 3/8-1 3/4UNC 1.377 0.25 2.76 2.126 2.85 


F JE G B D DB J QC QB H FN FV GF SB UGF Q5 WF 

4.72 2.68 0.43 3.94 3.15 1.46 1.26 3.15 6.65 0.35 1.26 1.5 0.63 6.3 1.97 3.44 3.43 

BAD38 


LA71 18.98 21.14 5.47 5.75 1/2" + 3/4" 49 

LA71Z 19.72 21.89 5.47 5.75 1/2" + 3/4" 49 

LA80 20.43 22.93 6.16 6.10 1/2" + 3/4" 60 

LA90S 21.65 24.45 6.85 6.42 1/2" + 3/4" 71 

LA90Z 23.43 26.22 6.85 6.42 1/2" + 3/4" 71 

LA100Z 26.22 29.41 7.68 6.61 2 x 3/4" 90 


4 - 92 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




BAD38 BAD 510 

[mm] 



132 95 115 3 65 M10x17 31,75 50 140 118 37 100 3/8“-1 3/4“UNC 34,98 6,35 70 54 72,5 


F JE G B D DB J QC QB H FN FV GF SB UGF Q5 WF 

120 68 11 100 80 37 32 80 169 9 32 38 16 160 50 87,5 87 

BAD38 


LA71 482.0 537.0 139.0 146.0 1/2" + 3/4" 22 

LA71Z 501.0 556.0 139.0 146.0 1/2" + 3/4" 22 

LA80 519.0 582.5 156.5 155.0 1/2" + 3/4" 27 

LA90S 550.0 621.0 174.0 163.0 1/2" + 3/4" 32 

LA90Z 595.0 666.0 174.0 163.0 1/2" + 3/4" 32 

LA100Z 666.0 747.0 195.0 168.0 2 x 3/4" 41 


4 - 93




BAF38 BAF 510 

[inch] 

Flange 

BD AK GA AJ BB XF BF 

6.3 4.33 0.39 5.12 0.12 3.82 0.35 

7.87 5.12 0.47 6.5 0.14 3.82 0.43 

Output Shaft 


1.25 1.969 5.512 4.646 1.465 3.937 3/8-1 3/4UNC 1.377 0.25 2.76 2.126 2.85 

Gearcase 


5.2 1.97 3.94 3.74 4.53 2.68 0.43 4.72 0.12 3.15 1.97 1.97 1.46 1.26 3.15 6.65 2.56 5.18 0.35 M10x17 

Motor 

BAF38 


LA71 18.98 21.14 5.47 5.75 1/2" + 3/4" 49 

LA71Z 19.72 21.89 5.47 5.75 1/2" + 3/4" 49 

LA80 20.43 22.93 6.16 6.10 1/2" + 3/4" 60 

LA90S 21.65 24.45 6.85 6.42 1/2" + 3/4" 68 

LA90Z 23.43 26.22 6.85 6.42 1/2" + 3/4" 68 

LA100Z 26.22 29.41 7.68 6.61 2 x 3/4" 88 


4 - 94 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


160 110 10 130 3 97 9 

200 130 12 165 3,5 97 11 


BAF38 BAF 510 

[mm] 

Output Shaft 


31,75 50 140 118 37,2 100 3/8“-1 3/4“UNC 34,98 6,35 70 100 72,5 

Gearcase 


132 50 100 95 115 68 11 120 3 80 50 50 37 32 80 169 65 131,5 9 M10x17 

Motor 

BAF38 


LA71 482.0 537.0 139.0 146.0 1/2" + 3/4" 22 

LA71Z 501.0 556.0 139.0 146.0 1/2" + 3/4" 22 

LA80 519.0 582.5 156.5 155.0 1/2" + 3/4" 27 

LA90S 550.0 621.0 174.0 163.0 1/2" + 3/4" 31 

LA90Z 595.0 666.0 174.0 163.0 1/2" + 3/4" 31 

LA100Z 666.0 747.0 195.0 168.0 2 x 3/4" 40 


4 - 95



Foot mounted 

K38 K 510 

[inch] 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 2.36 3/8-16UNC 

Gearcase 

E FA F G JE B D FC FB PB2 DB JB JA JC JD PB1 X QC QB WG P2 EA H 

4.33 1.1 3.94 0.63 3.23 4.72 3.94 2.68 1.85 2.46 0.37 1.26 1.38 1.22 1.3 4.92 0 2.48 6.46 2.24 2.64 4.33 0.43 

Motor 

K38 


LA71 19.11 21.28 5.47 5.75 1/2" + 3/4" 44 

LA71Z 19.86 22.03 5.47 5.75 1/2" + 3/4" 44 

LA80 20.57 23.07 6.16 6.10 1/2" + 3/4" 55 

LA90S 21.79 24.59 6.85 6.42 1/2" + 3/4" 64 

LA90Z 23.56 26.36 6.85 6.42 1/2" + 3/4" 64 

LA100Z 26.36 29.55 7.68 6.61 2 x 3/4" 84 

LA112Z 25.87 29.06 8.62 7.13 2 x 3/4" 108 


4 - 96 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Output Shaft 


25,4 50 38,1 6,401 28,19 6,35 60 3/8“-16UNC 


K38 K 510 

[mm] 

Gearcase 


110 28 100 16 82 120 100 68 47 62,5 9,5 32 35 31 33 125 0 63 164 57 67 110 11 

Motor 

B A 

K38 


LA71 485.5 540.5 139.0 146.0 1/2" + 3/4" 20 

LA71Z 504.5 559.5 139.0 146.0 1/2" + 3/4" 20 

LA80 522.5 586.0 156.5 155.0 1/2" + 3/4" 25 

LA90S 553.5 624.5 174.0 163.0 1/2" + 3/4" 29 

LA90Z 598.5 669.5 174.0 163.0 1/2" + 3/4" 29 

LA100Z 669.5 750.5 195.0 168.0 2 x 3/4" 38 

LA112Z 657.0 738.0 219.0 181.0 2 x 3/4" 49 


4 - 97




KF38 KF 510 

[inch] 

Flange 


6.3 4.33 0.39 5.12 0.14 0.35 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 1.97 3/8-16UNC 

Gearcase 

E FA F B D PB2 DB JB PB1 X QC QB WG P2 EA TAP H 

4.61 1.38 2.36 3.94 3.94 2.46 0.37 1.26 4.92 0 2.76 6.46 2.24 2.64 5.28 M10x17 

Motor 

KF38 


LA71 19.39 21.56 5.47 5.75 1/2" + 3/4" 46 

LA71Z 20.14 22.30 5.47 5.75 1/2" + 3/4" 46 

LA80 20.85 23.35 6.16 6.10 1/2" + 3/4" 57 

LA90S 22.07 24.86 6.85 6.42 1/2" + 3/4" 68 

LA90Z 23.84 26.63 6.85 6.42 1/2" + 3/4" 68 

LA100Z 26.63 29.82 7.68 6.61 2 x 3/4" 88 

LA112Z 26.14 29.33 8.62 7.13 2 x 3/4" 110 


4 - 98 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


160 110 10 130 3,5 9 

Output Shaft 


25,4 50 38,1 6,401 28,19 6,35 50 3/8“-16UNC 


KF38 KF 510 

[mm] 

Gearcase 


117 35 60 100 100 62,5 9,5 32 125 0 70 164 57 67 134 M10x17 

Motor 

KF38 


LA71 492.5 547.5 139.0 146.0 1/2" + 3/4" 21 

LA71Z 511.5 566.5 139.0 146.0 1/2" + 3/4" 21 

LA80 529.5 593.0 156.5 155.0 1/2" + 3/4" 26 

LA90S 560.5 631.5 174.0 163.0 1/2" + 3/4" 31 

LA90Z 605.5 676.5 174.0 163.0 1/2" + 3/4" 31 

LA100Z 676.5 757.5 195.0 168.0 2 x 3/4" 40 

LA112Z 664.0 745.0 219.0 181.0 2 x 3/4" 50 


4 - 99



Shaft mounted 

KA38 KA 510 

[inch] 

Mounting 

E F FA G H 

4.33 3.94 1.1 0.63 0.43 

Output Shaft 


1 1.772 4.72 4.134 1.547 3.35 3/8-1 3/4UNC 1.124 0.25 2.36 1.732 2.48 

Gearcase 

JE B D FC FB PB2 DB JB JA JC JD PB1 QC QB WG P2 

3.23 4.72 3.94 2.68 1.85 2.46 0.37 1.26 1.38 1.22 1.3 4.92 2.48 6.46 2.24 2.64 

Motor 

KA38 


LA71 19.11 21.28 5.47 5.75 1/2" + 3/4" 40 

LA71Z 19.86 22.03 5.47 5.75 1/2" + 3/4" 40 

LA80 20.57 23.07 6.16 6.10 1/2" + 3/4" 51 

LA90S 21.79 24.59 6.85 6.42 1/2" + 3/4" 62 

LA90Z 23.56 26.36 6.85 6.42 1/2" + 3/4" 62 

LA100Z 26.36 29.55 7.68 6.61 2 x 3/4" 82 

LA112Z 25.87 29.06 8.62 7.13 2 x 3/4" 106 


4 - 100 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 

Mounting 

E F FA G H 

110 100 28 16 11 

Output Shaft 


25,4 45 120 105 39 85 3/8“-1 3/4“UNC 28,55 6,35 60 44 63 


KA38 KA 510 

[mm] 

Gearcase 

JE B D FC FB PB2 DB JB JA JC JD PB1 QC QB WG P2 

82 120 100 68 47 62,5 9,5 32 35 31 33 125 63 164 57 67 

Motor 

B A 

KA38 


LA71 485.5 540.5 139.0 146.0 1/2" + 3/4" 18 

LA71Z 504.5 559.5 139.0 146.0 1/2" + 3/4" 18 

LA80 522.5 586.0 156.5 155.0 1/2" + 3/4" 23 

LA90S 553.5 624.5 174.0 163.0 1/2" + 3/4" 28 

LA90Z 598.5 669.5 174.0 163.0 1/2" + 3/4" 28 

LA100Z 669.5 750.5 195.0 168.0 2 x 3/4" 37 

LA112Z 657.0 738.0 219.0 181.0 2 x 3/4" 48 


4 - 101




KAD38 KAD 510 

[inch] 



4.72 3.15 3.94 0.12 2.24 M8x14 1 1.772 4.724 4.134 1.547 3.35 3/8-1 3/4UNC 1.124 0.25 2.36 1.732 2.48 


D PB2 DB PB1 X QC QB P2 FN FV GF SB B FD GT OT R 

3.94 2.46 0.37 4.92 0 2.76 6.46 2.64 0.94 1.1 0.47 5.51 3.94 0.93 0.51 5.79 R0.87 

Motor 

KAD38 


LA71 19.39 21.56 5.47 5.75 1/2" + 3/4" 42 

LA71Z 20.14 22.30 5.47 5.75 1/2" + 3/4" 42 

LA80 20.85 23.35 6.16 6.10 1/2" + 3/4" 53 

LA90S 22.07 24.86 6.85 6.42 1/2" + 3/4" 62 

LA90Z 23.84 26.63 6.85 6.42 1/2" + 3/4" 62 

LA100Z 26.63 29.82 7.68 6.61 2 x 3/4" 84 

LA112Z 26.14 29.33 8.62 7.13 2 x 3/4" 106 


4 - 102 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




KAD38 KAD 510 

[mm] 

B A 



120 80 100 3 57 M8x14 25,4 45 120 105 39 85 3/8“-1 3/4“UNC 28,55 6,35 60 44 63 



100 62,5 9,5 125 0 70 164 67 24 28 12 140 100 23,5 13 147 R22 

Motor 

KAD38 


LA71 492.5 547.5 139.0 146.0 1/2" + 3/4" 19 

LA71Z 511.5 566.5 139.0 146.0 1/2" + 3/4" 19 

LA80 529.5 593.0 156.5 155.0 1/2" + 3/4" 24 

LA90S 560.5 631.5 174.0 163.0 1/2" + 3/4" 28 

LA90Z 605.5 676.5 174.0 163.0 1/2" + 3/4" 28 

LA100Z 676.5 757.5 195.0 168.0 2 x 3/4" 38 

LA112Z 664.0 745.0 219.0 181.0 2 x 3/4" 48 


4 - 103




KAF38 KAF 510 

[inch] 

Flange 


6.3 4.33 0.39 5.12 0.14 3.31 0.35 

Output Shaft 


1 1.772 4.724 0.059 1.547 3.35 3/8-1 3/4UNC 1.124 0.25 2.36 1.732 2.48 

Gearcase 

E FA F B D PB2 DB JB PB1 X QC QB WG P2 TAP H 

4.61 1.38 2.36 3.94 3.94 2.46 0.37 1.26 4.92 0 2.76 6.46 2.24 2.64 M10x17 

Motor 

KAF38 


LA71 19.39 21.56 5.47 5.75 1/2" + 3/4" 44 

LA71Z 20.14 22.30 5.47 5.75 1/2" + 3/4" 44 

LA80 20.85 23.35 6.16 6.10 1/2" + 3/4" 55 

LA90S 22.07 24.86 6.85 6.42 1/2" + 3/4" 64 

LA90Z 23.84 26.63 6.85 6.42 1/2" + 3/4" 64 

LA100Z 26.63 29.82 7.68 6.61 2 x 3/4" 86 

LA112Z 26.14 29.33 8.62 7.13 2 x 3/4" 108 


4 - 104 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Flange 


160 110 10 130 3,5 84 9 




KAF38 KAF 510 

[mm] 

B A 

Output Shaft 


25,4 45 120 1,5 39 85 3/8“-1 3/4“UNC 28,55 6,35 60 44 63 

Gearcase 


117 35 60 100 100 62,5 9,5 32 125 0 70 164 57 67 M10x17 

Motor 

KAF38 


LA71 492.5 547.5 139.0 146.0 1/2" + 3/4" 20 

LA71Z 511.5 566.5 139.0 146.0 1/2" + 3/4" 20 

LA80 529.5 593.0 156.5 155.0 1/2" + 3/4" 25 

LA90S 560.5 631.5 174.0 163.0 1/2" + 3/4" 29 

LA90Z 605.5 676.5 174.0 163.0 1/2" + 3/4" 29 

LA100Z 676.5 757.5 195.0 168.0 2 x 3/4" 39 

LA112Z 664.0 745.0 219.0 181.0 2 x 3/4" 49 


4 - 105




KAZ38 KAZ 510 

[inch] 

Mounting 


4.72 3.15 3.94 0.12 M8x14 

Output Shaft 


1 1.772 4.724 4.134 1.547 3.35 3/8-1 3/4UNC 1.124 0.25 2.36 1.732 2.48 

Gearcase 


4.61 1.38 2.36 3.94 3.94 2.46 0.37 1.26 4.92 0 2.76 6.46 2.24 2.64 M10x17 

Motor 

KAZ38 


LA71 19.39 21.56 5.47 5.75 1/2" + 3/4" 40 

LA71Z 20.14 22.30 5.47 5.75 1/2" + 3/4" 40 

LA80 20.85 23.35 6.16 6.10 1/2" + 3/4" 51 

LA90S 22.07 24.86 6.85 6.42 1/2" + 3/4" 62 

LA90Z 23.84 26.63 6.85 6.42 1/2" + 3/4" 62 

LA100Z 26.63 29.82 7.68 6.61 2 x 3/4" 82 

LA112Z 26.14 29.33 8.62 7.13 2 x 3/4" 106 


4 - 106 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Mounting 


120 80 100 3 M8x14 


KAZ38 KAZ 510 

[mm] 

B A 

Output Shaft 


25.4 45 120 105 39 85 3/8“-1 3/4“UNC 28,55 6,35 60 44 63 

Gearcase 


117 35 60 100 100 62,5 9,5 32 125 0 70 164 57 67 M10x17 

Motor 

KAZ38 


LA71 492.5 547.5 139.0 146.0 1/2" + 3/4" 18 

LA71Z 511.5 566.5 139.0 146.0 1/2" + 3/4" 18 

LA80 529.5 593.0 156.5 155.0 1/2" + 3/4" 23 

LA90S 560.5 631.5 174.0 163.0 1/2" + 3/4" 28 

LA90Z 605.5 676.5 174.0 163.0 1/2" + 3/4" 28 

LA100Z 676.5 757.5 195.0 168.0 2 x 3/4" 37 

LA112Z 664.0 745.0 219.0 181.0 2 x 3/4" 48 


4 - 107



Foot mounted 

K48 K 510 

[inch] 

Output Shaft 


1.25 2.36 1.875 0.133 1.36 0.25 2.95 5/8-11UNC 

Gearcase 


5.12 1.38 4.72 0.71 3.86 5.71 4.41 2.95 2.17 2.46 0.43 1.57 1.54 1.42 1.57 4.92 0.12 2.8 7.32 2.8 2.95 5.31 0.43 

Motor 

K48 


LA71 20.30 22.46 5.47 5.75 1/2" + 3/4" 53 

LA71Z 21.04 23.21 5.47 5.75 1/2" + 3/4" 53 

LA80 21.75 24.25 6.16 6.10 1/2" + 3/4" 64 

LA90S 22.97 25.77 6.85 6.42 1/2" + 3/4" 75 

LA90Z 24.74 27.54 6.85 6.42 1/2" + 3/4" 75 

LA100Z 27.54 30.73 7.68 6.61 2 x 3/4" 95 

LA112Z 27.05 30.24 8.62 7.13 2 x 3/4" 95 


4 - 108 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Output Shaft 


31,75 60 47,625 3,378 34,54 6,35 75 5/8“-11UNC 


K48 K 510 

[mm] 

Gearcase 


130 35 120 18 98 145 112 75 55 62,5 11 40 39 36 40 125 3 71 186 71 75 135 11 

Motor 

B A 

K48 


LA71 515.5 570.5 139.0 146.0 1/2" + 3/4" 24 

LA71Z 534.5 589.5 139.0 146.0 1/2" + 3/4" 24 

LA80 552.5 616.0 156.5 155.0 1/2" + 3/4" 29 

LA90S 583.5 654.5 174.0 163.0 1/2" + 3/4" 34 

LA90Z 628.5 699.5 174.0 163.0 1/2" + 3/4" 34 

LA100Z 699.5 780.5 195.0 168.0 2 x 3/4" 43 

LA112Z 687.0 768.0 219.0 181.0 2 x 3/4" 43 


4 - 109




KF48 KF 510 

[inch] 

Flange 


7.87 5.12 0.47 6.5 0.14 0.43 

Output Shaft 


1.25 2.36 1.875 0.133 1.36 0.25 2.36 3/8-16UNC 

Gearcase 


5.51 1.57 2.76 4.33 4.41 2.46 0.43 1.18 4.92 0.12 3.05 7.32 2.8 2.95 6.3 M10x17 

Motor 

KF48 


LA71 20.55 22.72 5.47 5.75 1/2" + 3/4" 57 

LA71Z 21.30 23.46 5.47 5.75 1/2" + 3/4" 57 

LA80 22.01 24.51 6.16 6.10 1/2" + 3/4" 68 

LA90S 23.23 26.02 6.85 6.42 1/2" + 3/4" 79 

LA90Z 25.00 27.80 6.85 6.42 1/2" + 3/4" 79 

LA100Z 27.80 30.98 7.68 6.61 2 x 3/4" 99 

LA112Z 27.30 30.49 8.62 7.13 2 x 3/4" 123 


4 - 110 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


200 130 12 165 3,5 11 

Output Shaft 


31,75 60 47,625 3,378 34,54 6,35 60 3/8“-16UNC 


KF48 KF 510 

[mm] 

Gearcase 


140 40 70 110 112 62,5 11 30 125 3 77,5 186 71 75 160 M10x17 

Motor 

KF48 


LA71 522.0 577.0 139.0 146.0 1/2" + 3/4" 26 

LA71Z 541.0 596.0 139.0 146.0 1/2" + 3/4" 26 

LA80 559.0 622.5 156.5 155.0 1/2" + 3/4" 31 

LA90S 590.0 661.0 174.0 163.0 1/2" + 3/4" 36 

LA90Z 635.0 706.0 174.0 163.0 1/2" + 3/4" 36 

LA100Z 706.0 787.0 195.0 168.0 2 x 3/4" 45 

LA112Z 693.5 774.5 219.0 181.0 2 x 3/4" 56 


4 - 111



Shaft mounted 

KA48 KA 510 

[inch] 

Mounting 

E F FA G H 

5.12 4.72 1.38 0.71 0.43 

Output Shaft 


1.375 2.165 5.91 5.039 1.37 4.53 3/8-16UNC 1.53 0.31 2.95 2.283 3.07 

Gearcase 

JE B D FC FB PB2 DB JB JA JC JD PB1 X QC QB WG P2 

3.86 5.71 4.41 2.95 2.17 2.46 0.43 1.57 1.54 1.42 1.57 4.92 0.12 2.8 7.32 2.8 2.95 

Motor 

KA48 


LA71 20.30 22.46 5.47 5.75 1/2" + 3/4" 51 

LA71Z 21.04 23.21 5.47 5.75 1/2" + 3/4" 51 

LA80 21.75 24.25 6.16 6.10 1/2" + 3/4" 62 

LA90S 22.97 25.77 6.85 6.42 1/2" + 3/4" 71 

LA90Z 24.74 27.54 6.85 6.42 1/2" + 3/4" 71 

LA100Z 27.54 30.73 7.68 6.61 2 x 3/4" 90 

LA112Z 27.05 30.24 8.62 7.13 2 x 3/4" 115 


4 - 112 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 

Mounting 

E F FA G H 

130 120 35 18 11 

Output Shaft 


34,925 55 150 128 35 115 3/8“-16UNC 38,86 7,874 75 58 78 


KA48 KA 510 

[mm] 

Gearcase 


98 145 112 75 55 62,5 11 40 39 36 40 125 3 71 186 71 75 

Motor 

B A 

KA48 


LA71 515.5 570.5 139.0 146.0 1/2" + 3/4" 23 

LA71Z 534.5 589.5 139.0 146.0 1/2" + 3/4" 23 

LA80 552.5 616.0 156.5 155.0 1/2" + 3/4" 28 

LA90S 583.5 654.5 174.0 163.0 1/2" + 3/4" 32 

LA90Z 628.5 699.5 174.0 163.0 1/2" + 3/4" 32 

LA100Z 699.5 780.5 195.0 168.0 2 x 3/4" 41 

LA112Z 687.0 768.0 219.0 181.0 2 x 3/4" 52 


4 - 113




KAD48 KAD 510 

[inch] 



5.2 3.74 4.53 0.12 2.8 M10x17 1.375 2.165 5.91“ 5.039 1.37 4.53 3/8-16UNC 1.53 0.31 2.95 2.283 3.07 



4.41 2.46 0.43 4.92 0.12 3.05 7.32 2.95 1.42 1.65 0.71 6.3 4.33 1.18 0.51 6.69 R1.34 

Motor 

KAD48 


LA71 20.55 22.72 5.47 5.75 1/2" + 3/4" 53 

LA71Z 21.30 23.46 5.47 5.75 1/2" + 3/4" 53 

LA80 22.01 24.51 6.16 6.10 1/2" + 3/4" 64 

LA90S 23.23 26.02 6.85 6.42 1/2" + 3/4" 73 

LA90Z 25.00 27.80 6.85 6.42 1/2" + 3/4" 73 

LA100Z 27.80 30.98 7.68 6.61 2 x 3/4" 93 

LA112Z 27.30 30.49 8.62 7.13 2 x 3/4" 117 


4 - 114 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




KAD48 KAD 510 

[mm] 

B A 



132 95 115 3 71 M10x17 34,925 55 150 128 35 115 3/8“-16UNC 38,86 7,874 75 58 78 



112 62,5 11 125 3 77,5 186 75 36 42 18 160 110 30 13 170 R34 

Motor 

KAD48 


LA71 522.0 577.0 139.0 146.0 1/2" + 3/4" 24 

LA71Z 541.0 596.0 139.0 146.0 1/2" + 3/4" 24 

LA80 559.0 622.5 156.5 155.0 1/2" + 3/4" 29 

LA90S 590.0 661.0 174.0 163.0 1/2" + 3/4" 33 

LA90Z 635.0 706.0 174.0 163.0 1/2" + 3/4" 33 

LA100Z 706.0 787.0 195.0 168.0 2 x 3/4" 42 

LA112Z 693.5 774.5 219.0 181.0 2 x 3/4" 53 


4 - 115




KAF48 KAF 510 

[inch] 

Flange 


7.87 5.12 0.47 6.5 0.14 3.94 0.43 

Output Shaft 


1.375 2.165 5.91“ 5.039 1.37 4.53 3/8-16UNC 1.53 0.31 2.95 2.283 3.07 

Gearcase 


5.51 1.57 2.76 4.33 4.41 2.46 0.43 1.18 4.92 0.12 3.05 7.32 2.8 2.95 M10x17 

Motor 

KAF48 


LA71 20.55 22.72 5.47 5.75 1/2" + 3/4" 55 

LA71Z 21.30 23.46 5.47 5.75 1/2" + 3/4" 55 

LA80 22.01 24.51 6.16 6.10 1/2" + 3/4" 66 

LA90S 23.23 26.02 6.85 6.42 1/2" + 3/4" 75 

LA90Z 25.00 27.80 6.85 6.42 1/2" + 3/4" 75 

LA100Z 27.80 30.98 7.68 6.61 2 x 3/4" 97 

LA112Z 27.30 30.49 8.62 7.13 2 x 3/4" 119 


4 - 116 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Flange 


200 130 12 165 3,5 100 11 




KAF48 KAF 510 

[mm] 

B A 

Output Shaft 


34,925 55 150 128 35 115 3/8“-16UNC 38,86 7,874 75 58 78 

Gearcase 


140 40 70 110 112 62,5 11 30 125 3 77,5 186 71 75 M10x17 

Motor 

KAF48 


LA71 522.0 577.0 139.0 146.0 1/2" + 3/4" 25 

LA71Z 541.0 596.0 139.0 146.0 1/2" + 3/4" 25 

LA80 559.0 622.5 156.5 155.0 1/2" + 3/4" 30 

LA90S 590.0 661.0 174.0 163.0 1/2" + 3/4" 34 

LA90Z 635.0 706.0 174.0 163.0 1/2" + 3/4" 34 

LA100Z 706.0 787.0 195.0 168.0 2 x 3/4" 44 

LA112Z 693.5 774.5 219.0 181.0 2 x 3/4" 54 


4 - 117




KAZ48 KAZ 510 

[inch] 

Mounting 


5.2 3.74 4.53 0.12 M10x17 

Output Shaft 


1.375 2.165 5.91“ 5.039 1.37 4.53 3/8-16UNC 1.53 0.31 2.95 2.283 3.07 

Gearcase 


5.51 1.57 2.76 4.33 4.41 2.46 0.43 1.18 4.92 0.12 3.05 7.32 2.8 2.95 M10x17 

Motor 

KAZ48 


LA71 20.55 22.72 5.47 5.75 1/2" + 3/4" 49 

LA71Z 21.30 23.46 5.47 5.75 1/2" + 3/4" 49 

LA80 22.01 24.51 6.16 6.10 1/2" + 3/4" 60 

LA90S 23.23 26.02 6.85 6.42 1/2" + 3/4" 71 

LA90Z 25.00 27.80 6.85 6.42 1/2" + 3/4" 71 

LA100Z 27.80 30.98 7.68 6.61 2 x 3/4" 90 

LA112Z 27.30 30.49 8.62 7.13 2 x 3/4" 115 


4 - 118 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Mounting 


132 95 115 3 M10x17 


KAZ48 KAZ 510 

[mm] 

Output Shaft 


34,925 55 150 128 35 115 3/8“-16UNC 38,86 7,874 75 58 78 

Gearcase 


140 40 70 110 112 62,5 11 30 125 3 77,5 186 71 75 M10x17 

Motor 

B A 

KAZ48 


LA71 522.0 577.0 139.0 146.0 1/2" + 3/4" 22 

LA71Z 541.0 596.0 139.0 146.0 1/2" + 3/4" 22 

LA80 559.0 622.5 156.5 155.0 1/2" + 3/4" 27 

LA90S 590.0 661.0 174.0 163.0 1/2" + 3/4" 32 

LA90Z 635.0 706.0 174.0 163.0 1/2" + 3/4" 32 

LA100Z 706.0 787.0 195.0 168.0 2 x 3/4" 41 

LA112Z 693.5 774.5 219.0 181.0 2 x 3/4" 52 


4 - 119



Foot mounted 

K68 K 510 

[inch] 

Output Shaft 


1.625 3.15 2.75 0.065 1.79 0.375 3.935 5/8-11UNC 

Gearcase 


4.72 1.18 5.51 0.87 4.67 6.69 5.51 3.74 2.56 3.15 0.26 1.97 1.97 1.89 1.97 6.3 0.51 3.54 8.66 3.39 3.58 6.69 0.53 

Motor 

K68 


LA71 22.17 24.33 5.47 5.75 1/2" + 3/4" 97 

LA71Z 22.91 25.08 5.47 5.75 1/2" + 3/4" 97 

LA80 23.62 26.12 6.16 6.10 1/2" + 3/4" 108 

LA90S 24.84 27.64 6.85 6.42 1/2" + 3/4" 117 

LA90Z 26.61 29.41 6.85 6.42 1/2" + 3/4" 117 

LA100Z 29.41 32.60 7.68 6.61 2 x 3/4" 137 

LA112Z 28.90 32.09 8.62 7.13 2 x 3/4" 163 

LA132SP 30.24 34.25 10.20 7.68 1" + 3/4" 185 

LA132ZMP 32.05 36.06 10.20 7.68 1" + 3/4" 205 


4 - 120 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Output Shaft 


41,275 80 69,85 1,651 45,47 9,525 100 5/8“-11UNC 


K68 K 510 

[mm] 

Gearcase 


120 30 140 22 118,5 170 140 95 65 80 6,5 50 50 48 50 160 13 90 220 86 91 170 13,5 

Motor 

B A 

K68 


LA71 563.0 618.0 139.0 146.0 1/2" + 3/4" 44 

LA71Z 582.0 637.0 139.0 146.0 1/2" + 3/4" 44 

LA80 600.0 663.5 156.5 155.0 1/2" + 3/4" 49 

LA90S 631.0 702.0 174.0 163.0 1/2" + 3/4" 53 

LA90Z 676.0 747.0 174.0 163.0 1/2" + 3/4" 53 

LA100Z 747.0 828.0 195.0 168.0 2 x 3/4" 62 

LA112Z 734.0 815.0 219.0 181.0 2 x 3/4" 74 

LA132SP 768.0 870.0 259.0 195.0 1" + 3/4" 84 

LA132ZMP 814.0 916.0 259.0 195.0 1" + 3/4" 93 


4 - 121




KF68 KF 510 

[inch] 

Flange 


9.84 7.09 0.59 8.46 0.16 0.53 

Output Shaft 


1.625 3.15 2.75 0.065 1.79 0.375 3.15 5/8-11UNC 

Gearcase 


5.98 1.65 3.46 5.51 5.51 3.15 0.26 1.97 6.3 0.51 3.48 8.66 3.39 3.58 7.6 M12x21 

Motor 

KF68 


LA71 22.11 24.27 5.47 5.75 1/2" + 3/4" 108 

LA71Z 22.85 25.02 5.47 5.75 1/2" + 3/4" 108 

LA80 23.56 26.06 6.16 6.10 1/2" + 3/4" 119 

LA90S 24.78 27.58 6.85 6.42 1/2" + 3/4" 128 

LA90Z 26.56 29.35 6.85 6.42 1/2" + 3/4" 128 

LA100Z 29.35 32.54 7.68 6.61 2 x 3/4" 148 

LA112Z 28.84 32.03 8.62 7.13 2 x 3/4" 174 

LA132SP 30.18 34.19 10.20 7.68 1" + 3/4" 196 

LA132ZMP 31.99 36.00 10.20 7.68 1" + 3/4" 216 


4 - 122 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


250 180 15 215 4 13,5 

Output Shaft 


41,275 80 69,85 1,651 45,47 9,525 80 5/8“-11UNC 


KF68 KF 510 

[mm] 

Gearcase 


152 42 88 140 140 80 6,5 50 160 13 88,5 220 86 91 193 M12x21 

Motor 

KF68 


LA71 561.5 616.5 139.0 146.0 1/2" + 3/4" 49 

LA71Z 580.5 635.5 139.0 146.0 1/2" + 3/4" 49 

LA80 598.5 662.0 156.5 155.0 1/2" + 3/4" 54 

LA90S 629.5 700.5 174.0 163.0 1/2" + 3/4" 58 

LA90Z 674.5 745.5 174.0 163.0 1/2" + 3/4" 58 

LA100Z 745.5 826.5 195.0 168.0 2 x 3/4" 67 

LA112Z 732.5 813.5 219.0 181.0 2 x 3/4" 79 

LA132SP 766.5 868.5 259.0 195.0 1" + 3/4" 89 

LA132ZMP 812.5 914.5 259.0 195.0 1" + 3/4" 98 


4 - 123



Shaft mounted 

KA68 KA 510 

[inch] 


E F FA G H U UF VC VG VH VL M BOLT UY Y EA EB Q1 

4.72 5.51 1.18 0.87 0.53 1.5 2.559 7.09 5.906 1.93 5.31 5/8-11UNC 1.68 0.38 3.54 2.717 3.66 

Gearcase 


4.67 6.69 5.51 3.74 2.56 3.15 0.26 1.97 1.97 1.89 1.97 6.3 0.51 3.54 8.66 3.39 3.58 

Motor 

KA68 


LA71 22.17 24.33 5.47 5.75 1/2" + 3/4" 88 

LA71Z 22.91 25.08 5.47 5.75 1/2" + 3/4" 88 

LA80 23.62 26.12 6.16 6.10 1/2" + 3/4" 99 

LA90S 24.84 27.64 6.85 6.42 1/2" + 3/4" 110 

LA90Z 26.61 29.41 6.85 6.42 1/2" + 3/4" 110 

LA100Z 29.41 32.60 7.68 6.61 2 x 3/4" 130 

LA112Z 28.90 32.09 8.62 7.13 2 x 3/4" 154 

LA132SP 30.24 34.25 10.20 7.68 1" + 3/4" 176 

LA132ZMP 32.05 36.06 10.20 7.68 1" + 3/4" 198 


4 - 124 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


KA68 KA 510 

[mm] 

B A 



120 140 30 22 13,5 38,1 65 180 150 49 135 5/8“-11UNC 42,67 9,652 90 69 93 

Gearcase 


118,5 170 140 95 65 80 6,5 50 50 48 50 160 13 90 220 86 91 

Motor 

KA68 


LA71 563.0 618.0 139.0 146.0 1/2" + 3/4" 40 

LA71Z 582.0 637.0 139.0 146.0 1/2" + 3/4" 40 

LA80 600.0 663.5 156.5 155.0 1/2" + 3/4" 45 

LA90S 631.0 702.0 174.0 163.0 1/2" + 3/4" 50 

LA90Z 676.0 747.0 174.0 163.0 1/2" + 3/4" 50 

LA100Z 747.0 828.0 195.0 168.0 2 x 3/4" 59 

LA112Z 734.0 815.0 219.0 181.0 2 x 3/4" 70 

LA132SP 768.0 870.0 259.0 195.0 1" + 3/4" 80 

LA132ZMP 814.0 916.0 259.0 195.0 1" + 3/4" 90 


4 - 125




KAD68 KAD 510 

[inch] 



5.91 4.33 5.12 0.14 3.39 M12x21 1.5 2.559 7.09 5.906 1.93 5.31 5/8-11UNC 1.68 0.38 3.54 2.717 3.66 



5.51 3.15 0.26 6.3 0.51 3.48 8.66 3.58 1.42 1.65 0.71 7.87 5.51 1.34 0.59 7.17 R1.34 

Motor 

KAD68 


LA71 22.11 24.27 5.47 5.75 1/2" + 3/4" 93 

LA71Z 22.85 25.02 5.47 5.75 1/2" + 3/4" 93 

LA80 23.56 26.06 6.16 6.10 1/2" + 3/4" 104 

LA90S 24.78 27.58 6.85 6.42 1/2" + 3/4" 115 

LA90Z 26.56 29.35 6.85 6.42 1/2" + 3/4" 115 

LA100Z 29.35 32.54 7.68 6.61 2 x 3/4" 135 

LA112Z 28.84 32.03 8.62 7.13 2 x 3/4" 159 

LA132SP 30.18 34.19 10.20 7.68 1" + 3/4" 181 

LA132ZMP 31.99 36.00 10.20 7.68 1" + 3/4" 203 


4 - 126 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




KAD68 KAD 510 

[mm] 



150 110 130 3,5 86 M12x21 38,1 65 180 150 49 135 5/8“-11UNC 42,67 9,652 90 69 93 



140 80 6,5 160 13 88,5 220 91 36 42 18 200 140 34 15 182 R34 

Motor 

B A 

KAD68 


LA71 561.5 616.5 139.0 146.0 1/2" + 3/4" 42 

LA71Z 580.5 635.5 139.0 146.0 1/2" + 3/4" 42 

LA80 598.5 662.0 156.5 155.0 1/2" + 3/4" 47 

LA90S 629.5 700.5 174.0 163.0 1/2" + 3/4" 52 

LA90Z 674.5 745.5 174.0 163.0 1/2" + 3/4" 52 

LA100Z 745.5 826.5 195.0 168.0 2 x 3/4" 61 

LA112Z 732.5 813.5 219.0 181.0 2 x 3/4" 72 

LA132SP 766.5 868.5 259.0 195.0 1" + 3/4" 82 

LA132ZMP 812.5 914.5 259.0 195.0 1" + 3/4" 92 


4 - 127




KAF68 KAF 510 

[inch] 


BD AK GA AJ BB XF BF U UF VC VG VH VL M BOLT UY Y EA EB Q1 

9.84 7.09 0.59 8.46 0.16 4.45 0.53 1.5 2.559 7.09“ 5.906 1.93 5.31 5/8-11UNC 1.68 0.38 3.54 2.717 3.66 

Gearcase 


5.98 1.65 3.46 5.51 5.51 3.15 0.26 1.97 6.3 0.51 3.48 8.66 3.39 3.58 M12x21 

Motor 

KAF68 


LA71 22.11 24.27 5.47 5.75 1/2" + 3/4" 99 

LA71Z 22.85 25.02 5.47 5.75 1/2" + 3/4" 99 

LA80 23.56 26.06 6.16 6.10 1/2" + 3/4" 110 

LA90S 24.78 27.58 6.85 6.42 1/2" + 3/4" 121 

LA90Z 26.56 29.35 6.85 6.42 1/2" + 3/4" 121 

LA100Z 29.35 32.54 7.68 6.61 2 x 3/4" 141 

LA112Z 28.84 32.03 8.62 7.13 2 x 3/4" 165 

LA132SP 30.18 34.19 10.20 7.68 1" + 3/4" 187 

LA132ZMP 31.99 36.00 10.20 7.68 1" + 3/4" 209 


4 - 128 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




KAF68 KAF 510 

[mm] 

B A 



250 180 15 215 4 113 13,5 38,1 65 180 150 49 135 5/8“-11UNC 42,67 9,652 90 69 93 

Gearcase 


152 42 88 140 140 80 6,5 50 160 13 88,5 220 86 91 M12x21 

Motor 

KAF68 


LA71 561.5 616.5 139.0 146.0 1/2" + 3/4" 45 

LA71Z 580.5 635.5 139.0 146.0 1/2" + 3/4" 45 

LA80 598.5 662.0 156.5 155.0 1/2" + 3/4" 50 

LA90S 629.5 700.5 174.0 163.0 1/2" + 3/4" 55 

LA90Z 674.5 745.5 174.0 163.0 1/2" + 3/4" 55 

LA100Z 745.5 826.5 195.0 168.0 2 x 3/4" 64 

LA112Z 732.5 813.5 219.0 181.0 2 x 3/4" 75 

LA132SP 766.5 868.5 259.0 195.0 1" + 3/4" 85 

LA132ZMP 812.5 914.5 259.0 195.0 1" + 3/4" 95 


4 - 129




KAZ68 KAZ 510 

[inch] 


BD AK AJ BB TAP BF U UF VC VG VH VL M BOLT UY Y EA EB Q1 

5.91 4.33 5.12 0.14 M12x21 1.5 2.559 7.09 5.906 1.93 5.31 5/8-11UNC 1.68 0.38 3.54 2.717 3.66 

Gearcase 


5.98 1.65 3.46 5.51 5.51 3.15 0.26 1.97 6.3 0.51 3.48 8.66 3.39 3.58 M12x21 

Motor 

KAZ68 


LA71 22.11 24.27 5.47 5.75 1/2" + 3/4" 90 

LA71Z 22.85 25.02 5.47 5.75 1/2" + 3/4" 90 

LA80 23.56 26.06 6.16 6.10 1/2" + 3/4" 101 

LA90S 24.78 27.58 6.85 6.42 1/2" + 3/4" 110 

LA90Z 26.56 29.35 6.85 6.42 1/2" + 3/4" 110 

LA100Z 29.35 32.54 7.68 6.61 2 x 3/4" 130 

LA112Z 28.84 32.03 8.62 7.13 2 x 3/4" 157 

LA132SP 30.18 34.19 10.20 7.68 1" + 3/4" 179 

LA132ZMP 31.99 36.00 10.20 7.68 1" + 3/4" 198 


4 - 130 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




KAZ68 KAZ 510 

[mm] 



150 110 130 3,5 M12x21 38,1 65 180 150 49 135 5/8“-11UNC 42,67 9,652 90 69 93 

Gearcase 


152 42 88 140 140 80 6,5 50 160 13 88,5 220 86 91 M12x21 

Motor 

B A 

KAZ68 


LA71 561.5 616.5 139.0 146.0 1/2" + 3/4" 41 

LA71Z 580.5 635.5 139.0 146.0 1/2" + 3/4" 41 

LA80 598.5 662.0 156.5 155.0 1/2" + 3/4" 46 

LA90S 629.5 700.5 174.0 163.0 1/2" + 3/4" 50 

LA90Z 674.5 745.5 174.0 163.0 1/2" + 3/4" 50 

LA100Z 745.5 826.5 195.0 168.0 2 x 3/4" 59 

LA112Z 732.5 813.5 219.0 181.0 2 x 3/4" 71 

LA132SP 766.5 868.5 259.0 195.0 1" + 3/4" 81 

LA132ZMP 812.5 914.5 259.0 195.0 1" + 3/4" 90 


4 - 131



Foot mounted 

K88 K 510 

[inch] 

Output Shaft 


2 3.94“ 3.5 0.004 2.22 0.5 4.82 3/4-10UNC 

Gearcase 


5.91 1.57 6.5 0.98 5.43 7.87 7.09 4.92 2.95 3.94 0.79 2.17 2.17 2.56 2.17 7.87 0.51 4.41 10.31 3.94 4.53 8.07 0.71 

Motor 

K88 


LA71 24.45 26.61 5.47 5.75 1/2" + 3/4" 161 

LA71Z 25.20 27.36 5.47 5.75 1/2" + 3/4" 161 

LA80 25.91 28.41 6.16 6.10 1/2" + 3/4" 172 

LA90S 27.13 29.92 6.85 6.42 1/2" + 3/4" 183 

LA90Z 28.90 31.69 6.85 6.42 1/2" + 3/4" 183 

LA100Z 31.69 34.88 7.68 6.61 2 x 3/4" 203 

LA112Z 31.10 34.29 8.62 7.13 2 x 3/4" 229 

LA132SP 32.36 36.38 10.20 7.68 1" + 3/4" 258 

LA132ZMP 34.17 38.19 10.20 7.68 1" + 3/4" 278 

LA160MP 36.40 41.06 12.34 8.94 1" + 3/4" 329 

LA160ZLP 38.29 42.95 12.34 8.94 1" + 3/4" 329 


4 - 132 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Output Shaft 


50,8 100 88,9 0,102 56,39 12,7 122,5 3/4“-10UNC 


K88 K 510 

[mm] 

Gearcase 


150 40 165 25 138 200 180 125 75 100 20 55 55 65 55 200 13 112 262 100 115 205 18 

Motor 

B A 

K88 


LA71 621.0 676.0 139.0 146.0 1/2" + 3/4" 73 

LA71Z 640.0 695.0 139.0 146.0 1/2" + 3/4" 73 

LA80 658.0 721.5 156.5 155.0 1/2" + 3/4" 78 

LA90S 689.0 760.0 174.0 163.0 1/2" + 3/4" 83 

LA90Z 734.0 805.0 174.0 163.0 1/2" + 3/4" 83 

LA100Z 805.0 886.0 195.0 168.0 2 x 3/4" 92 

LA112Z 790.0 871.0 219.0 181.0 2 x 3/4" 104 

LA132SP 822.0 924.0 259.0 195.0 1" + 3/4" 117 

LA132ZMP 868.0 970.0 259.0 195.0 1" + 3/4" 126 

LA160MP 924.5 1043.0 313.5 227.0 1" + 3/4" 149 

LA160ZLP 972.5 1091.0 313.5 227.0 1" + 3/4" 149 


4 - 133




KF88 KF 510 

[inch] 

Flange 


11.81 9.06 0.63 10.43 0.16 0.53 

Output Shaft 


2 3.94 3.5 0.004 2.22 0.5 3.94 3/4-10UNC 

Gearcase 


6.69 1.89 4.53 6.69 7.09 3.94 0.79 2.17 7.87 0.51 4.33 10.31 3.94 4.53 9.53 M16x26 

Motor 

KF88 


LA71 24.37 26.54 5.47 5.75 1/2" + 3/4" 176 

LA71Z 25.12 27.28 5.47 5.75 1/2" + 3/4" 176 

LA80 25.83 28.33 6.16 6.10 1/2" + 3/4" 187 

LA90S 27.05 29.84 6.85 6.42 1/2" + 3/4" 196 

LA90Z 28.82 31.61 6.85 6.42 1/2" + 3/4" 196 

LA100Z 31.61 34.80 7.68 6.61 2 x 3/4" 218 

LA112Z 31.02 34.21 8.62 7.13 2 x 3/4" 243 

LA132SP 32.28 36.30 10.20 7.68 1" + 3/4" 271 

LA132ZMP 34.09 38.11 10.20 7.68 1" + 3/4" 291 

LA160MP 36.32 40.98 12.34 8.94 1" + 3/4" 344 

LA160ZLP 38.21 42.87 12.34 8.94 1" + 3/4" 344 


4 - 134 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 

BD AK GA AJ BB TAP BF 

300 230 16 265 4 13,5 

Output Shaft 

U V V3 VO UY Y AM M 

50,8 100 88,9 0,102 56,39 12,7 100 3/4“-10UNC 


KF88 KF 510 

[mm] 

Gearcase 


170 48 115 170 180 100 20 55 200 13 110 262 100 115 242 M16x26 

Motor 

KF88 


LA71 619.0 674.0 139.0 146.0 1/2" + 3/4" 80 

LA71Z 638.0 693.0 139.0 146.0 1/2" + 3/4" 80 

LA80 656.0 719.5 156.5 155.0 1/2" + 3/4" 85 

LA90S 687.0 758.0 174.0 163.0 1/2" + 3/4" 89 

LA90Z 732.0 803.0 174.0 163.0 1/2" + 3/4" 89 

LA100Z 803.0 884.0 195.0 168.0 2 x 3/4" 99 

LA112Z 788.0 869.0 219.0 181.0 2 x 3/4" 110 

LA132SP 820.0 922.0 259.0 195.0 1" + 3/4" 123 

LA132ZMP 866.0 968.0 259.0 195.0 1" + 3/4" 132 

LA160MP 922.5 1041.0 313.5 227.0 1" + 3/4" 156 

LA160ZLP 970.5 1089.0 313.5 227.0 1" + 3/4" 156 


4 - 135



Shaft mounted 

KA88 KA 510 

[inch] 



5.91 6.5 1.57 0.98 0.71 2 3.15 8.27 7.087 1.62 6.5 3/4-10UNC 2.23 0.5 4.13 3.071 4.25 

Gearcase 


5.43 7.87 7.09 4.92 2.95 3.94 0.79 2.17 2.17 2.56 2.17 7.87 0.51 4.41 10.31 3.94 4.53 

Motor 

KA88 


LA71 24.45 26.61 5.47 5.75 1/2" + 3/4" 143 

LA71Z 25.20 27.36 5.47 5.75 1/2" + 3/4" 143 

LA80 25.91 28.41 6.16 6.10 1/2" + 3/4" 154 

LA90S 27.13 29.92 6.85 6.42 1/2" + 3/4" 165 

LA90Z 28.90 31.69 6.85 6.42 1/2" + 3/4" 165 

LA100Z 31.69 34.88 7.68 6.61 2 x 3/4" 185 

LA112Z 31.10 34.29 8.62 7.13 2 x 3/4" 212 

LA132SP 32.36 36.38 10.20 7.68 1" + 3/4" 240 

LA132ZMP 34.17 38.19 10.20 7.68 1" + 3/4" 260 

LA160MP 36.40 41.06 12.34 8.94 1" + 3/4" 311 

LA160ZLP 38.29 42.95 12.34 8.94 1" + 3/4" 311 


4 - 136 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


KA88 KA 510 

[mm] 

B A 



150 165 40 25 18 50,8 80 210 180 41 165 3/4“-10UNC 56,64 12,7 105 78 108 

Gearcase 


138 200 180 125 75 100 20 55 55 65 55 200 13 112 262 100 115 

Motor 

KA88 


LA71 621.0 676.0 139.0 146.0 1/2" + 3/4" 65 

LA71Z 640.0 695.0 139.0 146.0 1/2" + 3/4" 65 

LA80 658.0 721.5 156.5 155.0 1/2" + 3/4" 70 

LA90S 689.0 760.0 174.0 163.0 1/2" + 3/4" 75 

LA90Z 734.0 805.0 174.0 163.0 1/2" + 3/4" 75 

LA100Z 805.0 886.0 195.0 168.0 2 x 3/4" 84 

LA112Z 790.0 871.0 219.0 181.0 2 x 3/4" 96 

LA132SP 822.0 924.0 259.0 195.0 1" + 3/4" 109 

LA132ZMP 868.0 970.0 259.0 195.0 1" + 3/4" 118 

LA160MP 924.5 1043.0 313.5 227.0 1" + 3/4" 141 

LA160ZLP 972.5 1091.0 313.5 227.0 1" + 3/4" 141 


4 - 137




KAD88 KAD 510 

[inch] 



7.48 5.12 6.5 0.14 3.94 M12x21 2 3.15 8.27 7.087 1.62 6.5 3/4-10UNC 2.23 0.5 4.13 3.071 4.25 



7.09 3.94 0.79 7.87 0.51 4.33 10.31 4.53 1.97 2.2 0.98 9.84 6.69 1.46 0.79 8.03 R1.57 

KAD88 


LA71 24.37 26.54 5.47 5.75 1/2" + 3/4" 150 

LA71Z 25.12 27.28 5.47 5.75 1/2" + 3/4" 150 

LA80 25.83 28.33 6.16 6.10 1/2" + 3/4" 161 

LA90S 27.05 29.84 6.85 6.42 1/2" + 3/4" 170 

LA90Z 28.82 31.61 6.85 6.42 1/2" + 3/4" 170 

LA100Z 31.61 34.80 7.68 6.61 2 x 3/4" 190 

LA112Z 31.02 34.21 8.62 7.13 2 x 3/4" 216 

LA132SP 32.28 36.30 10.20 7.68 1" + 3/4" 245 

LA132ZMP 34.09 38.11 10.20 7.68 1" + 3/4" 265 

LA160MP 36.32 40.98 12.34 8.94 1" + 3/4" 309 

LA160ZLP 38.21 42.87 12.34 8.94 1" + 3/4" 309 


4 - 138 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




KAD88 KAD 510 

[mm] 

B A 



190 130 165 3,5 100 M12x21 50,8 80 210 180 41 165 3/4“-10UNC 56,64 12,7 105 78 108 



180 100 20 200 13 110 262 115 50 56 25 250 170 37 20 204 R40 

KAD88 


LA71 619.0 674.0 139.0 146.0 1/2" + 3/4" 68 

LA71Z 638.0 693.0 139.0 146.0 1/2" + 3/4" 68 

LA80 656.0 719.5 156.5 155.0 1/2" + 3/4" 73 

LA90S 687.0 758.0 174.0 163.0 1/2" + 3/4" 77 

LA90Z 732.0 803.0 174.0 163.0 1/2" + 3/4" 77 

LA100Z 803.0 884.0 195.0 168.0 2 x 3/4" 86 

LA112Z 788.0 869.0 219.0 181.0 2 x 3/4" 98 

LA132SP 820.0 922.0 259.0 195.0 1" + 3/4" 111 

LA132ZMP 866.0 968.0 259.0 195.0 1" + 3/4" 120 

LA160MP 922.5 1041.0 313.5 227.0 1" + 3/4" 140 

LA160ZLP 970.5 1089.0 313.5 227.0 1" + 3/4" 140 


4 - 139




KAF88 KAF 510 

[inch] 



11.81 9.06 0.63 10.43 0.16 5.59 0.53 2 3.15 8.27 7.087 1.62 6.5 3/4-10UNC 2.23 0.5 4.13 3.071 4.25 

Gearcase 


6.69 1.89 4.53 6.69 7.09 3.94 0.79 2.17 7.87 0.51 4.33 10.31 3.94 4.53 M16x26 

KAF88 


LA71 24.37 26.54 5.47 5.75 1/2" + 3/4" 159 

LA71Z 25.12 27.28 5.47 5.75 1/2" + 3/4" 159 

LA80 25.83 28.33 6.16 6.10 1/2" + 3/4" 170 

LA90S 27.05 29.84 6.85 6.42 1/2" + 3/4" 179 

LA90Z 28.82 31.61 6.85 6.42 1/2" + 3/4" 179 

LA100Z 31.61 34.80 7.68 6.61 2 x 3/4" 198 

LA112Z 31.02 34.21 8.62 7.13 2 x 3/4" 225 

LA132SP 32.28 36.30 10.20 7.68 1" + 3/4" 254 

LA132ZMP 34.09 38.11 10.20 7.68 1" + 3/4" 273 

LA160MP 36.32 40.98 12.34 8.94 1" + 3/4" 326 

LA160ZLP 38.21 42.87 12.34 8.94 1" + 3/4" 326 


4 - 140 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




KAF88 KAF 510 

[mm] 

B A 



300 230 16 265 4 142 13,5 50,8 80 210 180 41 165 3/4“-10UNC 56,64 12,7 105 78 108 

Gearcase 


170 48 115 170 180 100 20 55 200 13 110 262 100 115 M16x26 

KAF88 


LA71 619.0 674.0 139.0 146.0 1/2" + 3/4" 72 

LA71Z 638.0 693.0 139.0 146.0 1/2" + 3/4" 72 

LA80 656.0 719.5 156.5 155.0 1/2" + 3/4" 77 

LA90S 687.0 758.0 174.0 163.0 1/2" + 3/4" 81 

LA90Z 732.0 803.0 174.0 163.0 1/2" + 3/4" 81 

LA100Z 803.0 884.0 195.0 168.0 2 x 3/4" 90 

LA112Z 788.0 869.0 219.0 181.0 2 x 3/4" 102 

LA132SP 820.0 922.0 259.0 195.0 1" + 3/4" 115 

LA132ZMP 866.0 968.0 259.0 195.0 1" + 3/4" 124 

LA160MP 922.5 1041.0 313.5 227.0 1" + 3/4" 148 

LA160ZLP 970.5 1089.0 313.5 227.0 1" + 3/4" 148 


4 - 141




KAZ88 KAZ 510 

[inch] 



7.48 5.12 6.5 0.14 M12x21 2 3.15 8.27 7.087 1.62 6.5 3/4-10UNC 2.23 0.5 4.13 3.071 4.25 

Gearcase 


6.69 1.89 4.53 6.69 7.09 3.94 0.79 2.17 7.87 0.51 4.33 10.31 3.94 4.53 M16x26 

Motor 

KAZ88 


LA71 24.37 26.54 5.47 5.75 1/2" + 3/4" 143 

LA71Z 25.12 27.28 5.47 5.75 1/2" + 3/4" 143 

LA80 25.83 28.33 6.16 6.10 1/2" + 3/4" 154 

LA90S 27.05 29.84 6.85 6.42 1/2" + 3/4" 163 

LA90Z 28.82 31.61 6.85 6.42 1/2" + 3/4" 163 

LA100Z 31.61 34.80 7.68 6.61 2 x 3/4" 185 

LA112Z 31.02 34.21 8.62 7.13 2 x 3/4" 209 

LA132SP 32.28 36.30 10.20 7.68 1" + 3/4" 238 

LA132ZMP 34.09 38.11 10.20 7.68 1" + 3/4" 258 

LA160MP 36.32 40.98 12.34 8.94 1" + 3/4" 311 

LA160ZLP 38.21 42.87 12.34 8.94 1" + 3/4" 311 


4 - 142 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




KAZ88 KAZ 510 

[mm] 

B A 



190 130 165 3,5 M12x21 50,8 80 210 180 41 165 3/4“-10UNC 56,64 12,7 105 78 108 

Gearcase 


170 48 115 170 180 100 20 55 200 13 110 262 100 115 M16x26 

Motor 

KAZ88 


LA71 619.0 674.0 139.0 146.0 1/2" + 3/4" 65 

LA71Z 638.0 693.0 139.0 146.0 1/2" + 3/4" 65 

LA80 656.0 719.5 156.5 155.0 1/2" + 3/4" 70 

LA90S 687.0 758.0 174.0 163.0 1/2" + 3/4" 74 

LA90Z 732.0 803.0 174.0 163.0 1/2" + 3/4" 74 

LA100Z 803.0 884.0 195.0 168.0 2 x 3/4" 84 

LA112Z 788.0 869.0 219.0 181.0 2 x 3/4" 95 

LA132SP 820.0 922.0 259.0 195.0 1" + 3/4" 108 

LA132ZMP 866.0 968.0 259.0 195.0 1" + 3/4" 117 

LA160MP 922.5 1041.0 313.5 227.0 1" + 3/4" 141 

LA160ZLP 970.5 1089.0 313.5 227.0 1" + 3/4" 141 


4 - 143



Foot mounted 

K108 K 510 

[inch] 

Output Shaft 


2.375 4.72 4.25 0.002 2.65 0.625 5.905 3/4-10UNC 

Gearcase 


7.09 2.17 7.09 1.18 5.51 9.06 8.35 5.59 3.58 4.92 0.51 3.15 2.76 2.91 2.76 9.84 0.79 5.2 12.91 4.53 5.24 9.45 0.87 

Motor 

K108 


LA80 28.70 31.20 6.16 6.10 1/2" + 3/4" 293 

LA90S 29.92 32.72 6.85 6.42 1/2" + 3/4" 304 

LA90Z 31.69 34.49 6.85 6.42 1/2" + 3/4" 304 

LA100Z 34.39 37.58 7.68 6.61 2 x 3/4" 322 

LA112Z 33.76 36.95 8.62 7.13 2 x 3/4" 348 

LA132SP 35.02 39.04 10.20 7.68 1" + 3/4" 373 

LA132ZMP 36.83 40.85 10.20 7.68 1" + 3/4" 395 

LA160MP 39.13 43.80 12.34 8.94 1" + 3/4" 450 

LA160ZLP 41.02 45.69 12.34 8.94 1" + 3/4" 450 

LG180ZMB 43.48 48.29 13.70 12.70 1 1/4" + 3/4" 719 

LG180ZLB 43.48 48.29 13.70 12.70 1 1/4" + 3/4" 719 


4 - 144 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Output Shaft 


60,325 120 107,95 0,051 67,31 15,875 150 3/4“-10UNC 


K108 K 510 

[mm] 

Gearcase 


180 55 180 30 140 230 212 142 91 125 13 80 70 74 70 250 20 132 328 115 133 240 22 

Motor 

B A 

K108 


LA80 729.0 792.5 156.5 155.0 1/2" + 3/4" 133 

LA90S 760.0 831.0 174.0 163.0 1/2" + 3/4" 138 

LA90Z 805.0 876.0 174.0 163.0 1/2" + 3/4" 138 

LA100Z 873.5 954.5 195.0 168.0 2 x 3/4" 146 

LA112Z 857.5 938.5 219.0 181.0 2 x 3/4" 158 

LA132SP 889.5 991.5 259.0 195.0 1" + 3/4" 169 

LA132ZMP 935.5 1037.5 259.0 195.0 1" + 3/4" 179 

LA160MP 994.0 1112.5 313.5 227.0 1" + 3/4" 204 

LA160ZLP 1042.0 1160.5 313.5 227.0 1" + 3/4" 204 

LG180ZMB 1104.5 1226.5 348.0 322.5 1 1/4" + 3/4" 326 

LG180ZLB 1104.5 1226.5 348.0 322.5 1 1/4" + 3/4" 326 


4 - 145




KF108 KF 510 

[inch] 

Flange 


13.78 9.84 0.71 11.81 0.2 0.69 

Output Shaft 


2.375 4.72 4.25 0.002 2.65 0.625 4.72 3/4-10UNC 

Gearcase 


8.86 2.56 6.1 8.27 8.35 4.92 0.51 2.76 9.84 0.79 5.33 12.91 4.53 5.24 10.87 M16x28 

Motor 

KF108 


LA80 28.84 31.34 6.16 6.10 1/2" + 3/4" 322 

LA90S 30.06 32.85 6.85 6.42 1/2" + 3/4" 333 

LA90Z 31.83 34.63 6.85 6.42 1/2" + 3/4" 333 

LA100Z 34.53 37.72 7.68 6.61 2 x 3/4" 351 

LA112Z 33.90 37.09 8.62 7.13 2 x 3/4" 377 

LA132SP 35.16 39.17 10.20 7.68 1" + 3/4" 404 

LA132ZMP 36.97 40.98 10.20 7.68 1" + 3/4" 423 

LA160MP 39.27 43.94 12.34 8.94 1" + 3/4" 478 

LA160ZLP 41.16 45.83 12.34 8.94 1" + 3/4" 478 

LG180ZMB 43.62 48.43 13.70 12.70 1 1/4" + 3/4" 747 

LG180ZLB 43.62 48.43 13.70 12.70 1 1/4" + 3/4" 747 


4 - 146 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


350 250 18 300 5 17,5 

Output Shaft 


60,325 120 107,95 0,051 67,31 15,875 120 3/4“-10UNC 


KF108 KF 510 

[mm] 

Gearcase 


225 65 155 210 212 125 13 70 250 20 135,5 328 115 133 276 M16x28 

Motor 

KF108 


LA80 732.5 796.0 156.5 155.0 1/2" + 3/4" 146 

LA90S 763.5 834.5 174.0 163.0 1/2" + 3/4" 151 

LA90Z 808.5 879.5 174.0 163.0 1/2" + 3/4" 151 

LA100Z 877.0 958.0 195.0 168.0 2 x 3/4" 159 

LA112Z 861.0 942.0 219.0 181.0 2 x 3/4" 171 

LA132SP 893.0 995.0 259.0 195.0 1" + 3/4" 183 

LA132ZMP 939.0 1041.0 259.0 195.0 1" + 3/4" 192 

LA160MP 997.5 1116.0 313.5 227.0 1" + 3/4" 217 

LA160ZLP 1045.5 1164.0 313.5 227.0 1" + 3/4" 217 

LG180ZMB 1108.0 1230.0 348.0 322.5 1 1/4" + 3/4" 339 

LG180ZLB 1108.0 1230.0 348.0 322.5 1 1/4" + 3/4" 339 


4 - 147



Shaft mounted 

KA108 KA 510 

[inch] 



7.09 7.09 2.17 1.18 0.87 2.375 3.74 9.45 8.189 2.37 7.28 3/4-10UNC 2.66 0.63 4.72 3.661 4.88 

Gearcase 


5.51 9.06 8.35 5.59 3.58 4.92 0.51 3.15 2.76 2.91 2.76 9.84 0.79 5.2 12.91 4.53 5.24 

Motor 

KA108 


LA80 28.70 31.20 6.16 6.10 1/2" + 3/4" 265 

LA90S 29.92 32.72 6.85 6.42 1/2" + 3/4" 276 

LA90Z 31.69 34.49 6.85 6.42 1/2" + 3/4" 276 

LA100Z 34.39 37.58 7.68 6.61 2 x 3/4" 293 

LA112Z 33.76 36.95 8.62 7.13 2 x 3/4" 320 

LA132SP 35.02 39.04 10.20 7.68 1" + 3/4" 346 

LA132ZMP 36.83 40.85 10.20 7.68 1" + 3/4" 366 

LA160MP 39.13 43.80 12.34 8.94 1" + 3/4" 421 

LA160ZLP 41.02 45.69 12.34 8.94 1" + 3/4" 421 

LG180ZMB 43.48 48.29 13.70 12.70 1 1/4" + 3/4" 690 

LG180ZLB 43.48 48.29 13.70 12.70 1 1/4" + 3/4" 690 


4 - 148 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


KA108 KA 510 

[mm] 

B A 



180 180 55 30 22 60,325 95 240 208 60 185 3/4“-10UNC 67,56 16,002 120 93 124 

Gearcase 


140 230 212 142 91 125 13 80 70 74 70 250 20 132 328 115 133 

Motor 

KA108 


LA80 729.0 792.5 156.5 155.0 1/2" + 3/4" 120 

LA90S 760.0 831.0 174.0 163.0 1/2" + 3/4" 125 

LA90Z 805.0 876.0 174.0 163.0 1/2" + 3/4" 125 

LA100Z 873.5 954.5 195.0 168.0 2 x 3/4" 133 

LA112Z 857.5 938.5 219.0 181.0 2 x 3/4" 145 

LA132SP 889.5 991.5 259.0 195.0 1" + 3/4" 157 

LA132ZMP 935.5 1037.5 259.0 195.0 1" + 3/4" 166 

LA160MP 994.0 1112.5 313.5 227.0 1" + 3/4" 191 

LA160ZLP 1042.0 1160.5 313.5 227.0 1" + 3/4" 191 

LG180ZMB 1104.5 1226.5 348.0 322.5 1 1/4" + 3/4" 313 

LG180ZLB 1104.5 1226.5 348.0 322.5 1 1/4" + 3/4" 313 


4 - 149




KAD108 KAD 510 

[inch] 



9.65 7.09 8.46 0.16 4.53 M16x28 2.375 3.74 9.45 8.189 2.37 7.28 3/4-10UNC 2.66 0.63 4.72 3.661 4.88 



8.35 4.92 0.51 9.84 0.79 5.33 12.91 5.24 1.97 2.2 0.98 11.81 8.27 1.87 0.98 10.83 R1.57 

Motor 

KAD108 


LA80 28.84 31.34 6.16 6.10 1/2" + 3/4" 282 

LA90S 30.06 32.85 6.85 6.42 1/2" + 3/4" 293 

LA90Z 31.83 34.63 6.85 6.42 1/2" + 3/4" 293 

LA100Z 34.53 37.72 7.68 6.61 2 x 3/4" 311 

LA112Z 33.90 37.09 8.62 7.13 2 x 3/4" 337 

LA132SP 35.16 39.17 10.20 7.68 1" + 3/4" 362 

LA132ZMP 36.97 40.98 10.20 7.68 1" + 3/4" 384 

LA160MP 39.27 43.94 12.34 8.94 1" + 3/4" 439 

LA160ZLP 41.16 45.83 12.34 8.94 1" + 3/4" 439 

LG180ZMB 43.62 48.43 13.70 12.70 1 1/4" + 3/4" 708 

LG180ZLB 43.62 48.43 13.70 12.70 1 1/4" + 3/4" 708 


4 - 150 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



245 180 215 4 115 M16x28 60,325 95 240 208 60 185 3/4“-10UNC 67,56 16,002 120 93 124 



212 125 13 250 20 135,5 328 133 50 56 25 300 210 47,5 25 275 R40 

Motor 

KAD108 


LA80 732.5 796.0 156.5 155.0 1/2" + 3/4" 128 

LA90S 763.5 834.5 174.0 163.0 1/2" + 3/4" 133 

LA90Z 808.5 879.5 174.0 163.0 1/2" + 3/4" 133 

LA100Z 877.0 958.0 195.0 168.0 2 x 3/4" 141 

LA112Z 861.0 942.0 219.0 181.0 2 x 3/4" 153 

LA132SP 893.0 995.0 259.0 195.0 1" + 3/4" 164 

LA132ZMP 939.0 1041.0 259.0 195.0 1" + 3/4" 174 

LA160MP 997.5 1116.0 313.5 227.0 1" + 3/4" 199 

LA160ZLP 1045.5 1164.0 313.5 227.0 1" + 3/4" 199 

LG180ZMB 1108.0 1230.0 348.0 322.5 1 1/4" + 3/4" 321 

LG180ZLB 1108.0 1230.0 348.0 322.5 1 1/4" + 3/4" 321 


4 - 151




KAF108 KAF 510 

[inch] 



13.78 9.84 0.71 11.81 0.2 6.14 0.69 2.375 3.74 9.45 8.189 2.37 7.28 3/4-10UNC 2.66 0.63 4.72 3.661 4.88 

Gearcase 


8.86 2.56 6.1 8.27 8.35 4.92 0.51 2.76 9.84 0.79 5.33 12.91 4.53 5.24 M16x28 

Motor 

KAF108 


LA80 28.84 31.34 6.16 6.10 1/2" + 3/4" 293 

LA90S 30.06 32.85 6.85 6.42 1/2" + 3/4" 302 

LA90Z 31.83 34.63 6.85 6.42 1/2" + 3/4" 302 

LA100Z 34.53 37.72 7.68 6.61 2 x 3/4" 320 

LA112Z 33.90 37.09 8.62 7.13 2 x 3/4" 348 

LA132SP 35.16 39.17 10.20 7.68 1" + 3/4" 373 

LA132ZMP 36.97 40.98 10.20 7.68 1" + 3/4" 392 

LA160MP 39.27 43.94 12.34 8.94 1" + 3/4" 450 

LA160ZLP 41.16 45.83 12.34 8.94 1" + 3/4" 450 

LG180ZMB 43.62 48.43 13.70 12.70 1 1/4" + 3/4" 719 

LG180ZLB 43.62 48.43 13.70 12.70 1 1/4" + 3/4" 719 


4 - 152 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 


BD AK GA AJ BB XF TAP BF U UF VC VG VH VL M BOLT UY Y EA EB Q1 

350 250 18 300 5 156 17,5 60,325 95 240 208 60 185 3/4“-10UNC 67,56 16,002 120 93 124 

Gearcase 


225 65 155 210 212 125 13 70 250 20 135,5 328 115 133 M16x28 

Motor 

B A 

KAF108 


LA80 732.5 796.0 156.5 155.0 1/2" + 3/4" 133 

LA90S 763.5 834.5 174.0 163.0 1/2" + 3/4" 137 

LA90Z 808.5 879.5 174.0 163.0 1/2" + 3/4" 137 

LA100Z 877.0 958.0 195.0 168.0 2 x 3/4" 145 

LA112Z 861.0 942.0 219.0 181.0 2 x 3/4" 158 

LA132SP 893.0 995.0 259.0 195.0 1" + 3/4" 169 

LA132ZMP 939.0 1041.0 259.0 195.0 1" + 3/4" 178 

LA160MP 997.5 1116.0 313.5 227.0 1" + 3/4" 204 

LA160ZLP 1045.5 1164.0 313.5 227.0 1" + 3/4" 204 

LG180ZMB 1108.0 1230.0 348.0 322.5 1 1/4" + 3/4" 326 

LG180ZLB 1108.0 1230.0 348.0 322.5 1 1/4" + 3/4" 326 


4 - 153




KAZ108 KAZ 510 

[inch] 



9.65 7.09 8.46 0.16 M16x28 2.375 3.74 9.45 8.189 2.37 7.28 3/4-10UNC 2.66 0.63 4.72 3.661 4.88 

Gearcase 


8.86 2.56 6.1 8.27 8.35 4.92 0.51 2.76 9.84 0.79 5.33 12.91 4.53 5.24 M16x28 

Motor 

KAZ108 


LA80 28.84 31.34 6.16 6.10 1/2" + 3/4" 271 

LA90S 30.06 32.85 6.85 6.42 1/2" + 3/4" 282 

LA90Z 31.83 34.63 6.85 6.42 1/2" + 3/4" 282 

LA100Z 34.53 37.72 7.68 6.61 2 x 3/4" 300 

LA112Z 33.90 37.09 8.62 7.13 2 x 3/4" 326 

LA132SP 35.16 39.17 10.20 7.68 1" + 3/4" 353 

LA132ZMP 36.97 40.98 10.20 7.68 1" + 3/4" 373 

LA160MP 39.27 43.94 12.34 8.94 1" + 3/4" 428 

LA160ZLP 41.16 45.83 12.34 8.94 1" + 3/4" 428 

LG180ZMB 43.62 48.43 13.70 12.70 1 1/4" + 3/4" 697 

LG180ZLB 43.62 48.43 13.70 12.70 1 1/4" + 3/4" 697 


4 - 154 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



245 180 215 4 M16x28 60,325 95 240 208 60 185 3/4“-10UNC 67,56 16,002 120 93 124 

Gearcase 


225 65 155 210 212 125 13 70 250 20 135,5 328 115 133 M16x28 

Motor 

KAZ108 


LA80 732.5 796.0 156.5 155.0 1/2" + 3/4" 123 

LA90S 763.5 834.5 174.0 163.0 1/2" + 3/4" 128 

LA90Z 808.5 879.5 174.0 163.0 1/2" + 3/4" 128 

LA100Z 877.0 958.0 195.0 168.0 2 x 3/4" 136 

LA112Z 861.0 942.0 219.0 181.0 2 x 3/4" 148 

LA132SP 893.0 995.0 259.0 195.0 1" + 3/4" 160 

LA132ZMP 939.0 1041.0 259.0 195.0 1" + 3/4" 169 

LA160MP 997.5 1116.0 313.5 227.0 1" + 3/4" 194 

LA160ZLP 1045.5 1164.0 313.5 227.0 1" + 3/4" 194 

LG180ZMB 1108.0 1230.0 348.0 322.5 1 1/4" + 3/4" 316 

LG180ZLB 1108.0 1230.0 348.0 322.5 1 1/4" + 3/4" 316 


4 - 155



Foot mounted 

K128 K 510 

[inch] 

Output Shaft 


2.875 5.51 4.875 0.046 3.2 0.75 6.695 3/4-10UNC 

Gearcase 


9.45 2.95 9.45 1.38 7.48 11.42 10.43 7.48 4.13 5.91 0.79 3.15 3.15 3.54 3.15 11.81 0.67 6.3 14.61 5.71 6.22 11.42 1.02 

Motor 

K128 


LA90S 32.26 35.06 6.85 6.42 1/2" + 3/4" 463 

LA90Z 34.04 36.83 6.85 6.42 1/2" + 3/4" 463 

LA100Z 36.71 39.90 7.68 6.61 2 x 3/4" 481 

LA112Z 36.10 39.29 8.62 7.13 2 x 3/4" 507 

LA132SP 37.32 41.34 10.20 7.68 1" + 3/4" 529 

LA132ZMP 39.13 43.15 10.20 7.68 1" + 3/4" 549 

LA160MP 41.48 46.14 12.34 8.94 1" + 3/4" 606 

LA160ZLP 43.37 48.03 12.34 8.94 1" + 3/4" 606 

LG180ZMB 45.71 50.51 13.70 12.70 1 1/4" + 3/4" 884 

LG180ZLB 45.71 50.51 13.70 12.70 1 1/4" + 3/4" 884 

LG200LB 45.91 50.87 15.16 11.85 1" + 3/4" 884 

K4-LGI225S 56.16 65.57 17.40 12.80 2" + 1 1/2" 994 

K4-LGI225ZM 58.52 67.93 17.40 12.80 2" + 1 1/2" 1338 


4 - 156 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Output Shaft 


73,025 140 123,825 1,168 81,28 19,05 170 3/4“-10UNC 


K128 K 510 

[mm] 

Gearcase 


240 75 240 35 190 290 265 190 105 150 20 80 80 90 80 300 17 160 371 145 158 290 26 

Motor 

B A 

K128 


LA90S 819.5 890.5 174.0 163.0 1/2" + 3/4" 210 

LA90Z 864.5 935.5 174.0 163.0 1/2" + 3/4" 210 

LA100Z 932.5 1013.5 195.0 168.0 2 x 3/4" 218 

LA112Z 917.0 998.0 219.0 181.0 2 x 3/4" 230 

LA132SP 948.0 1050.0 259.0 195.0 1" + 3/4" 240 

LA132ZMP 994.0 1096.0 259.0 195.0 1" + 3/4" 249 

LA160MP 1053.5 1172.0 313.5 227.0 1" + 3/4" 275 

LA160ZLP 1101.5 1220.0 313.5 227.0 1" + 3/4" 275 

LG180ZMB 1161.0 1283.0 348.0 322.5 1 1/4" + 3/4" 401 

LG180ZLB 1161.0 1283.0 348.0 322.5 1 1/4" + 3/4" 401 

LG200LB 1166.0 1292.0 385.0 301.0 1 1/4" + 3/4" 451 

K4-LGI225S 1426.5 1665.5 442.0 325.0 2 x 1 1/2" 607 

K4-LGI225ZM 1486.5 1725.5 442.0 325.0 2 x 1 1/2" 653 


4 - 157




KF128 KF 510 

[inch] 

Flange 


17.72 13.78 0.87 15.75 0.2 0.69 

Output Shaft 


2.875 5.51 4.875 0.046 3.2 0.75 5.51 3/4-10UNC 

Gearcase 


9.76 3.27 7.68 10.04 10.43 5.91 0.79 3.15 11.81 0.67 6.16 14.61 5.71 6.22 13.05 M20x34 

Motor 

KF128 


LA90S 32.13 34.92 6.85 6.42 1/2" + 3/4" 518 

LA90Z 33.90 36.69 6.85 6.42 1/2" + 3/4" 518 

LA100Z 36.57 39.76 7.68 6.61 2 x 3/4" 536 

LA112Z 35.96 39.15 8.62 7.13 2 x 3/4" 562 

LA132SP 37.19 41.20 10.20 7.68 1" + 3/4" 584 

LA132ZMP 39.00 43.01 10.20 7.68 1" + 3/4" 606 

LA160MP 41.34 46.00 12.34 8.94 1" + 3/4" 662 

LA160ZLP 43.23 47.89 12.34 8.94 1" + 3/4" 662 

LG180ZMB 45.57 50.37 13.70 12.70 1 1/4" + 3/4" 942 

LG180ZLB 45.57 50.37 13.70 12.70 1 1/4" + 3/4" 942 

LG200LB 45.77 50.73 15.16 11.85 1" + 3/4" 942 

K4-LGI225S 56.02 65.43 17.40 12.80 2" + 1 1/2" 1052 

K4-LGI225ZM 58.39 67.80 17.40 12.80 2" + 1 1/2" 1396 


4 - 158 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


450 350 22 400 5 17,5 

Output Shaft 


73,025 140 123,825 1,168 81,28 19,05 140 3/4“-10UNC 


KF128 KF 510 

[mm] 

Gearcase 


248 83 195 255 265 150 20 80 300 17 156,5 371 145 158 331,5 M20x34 

Motor 

KF128 


LA90S 816.0 887.0 174.0 163.0 1/2" + 3/4" 235 

LA90Z 861.0 932.0 174.0 163.0 1/2" + 3/4" 235 

LA100Z 929.0 1010.0 195.0 168.0 2 x 3/4" 243 

LA112Z 913.5 994.5 219.0 181.0 2 x 3/4" 255 

LA132SP 944.5 1046.5 259.0 195.0 1" + 3/4" 265 

LA132ZMP 990.5 1092.5 259.0 195.0 1" + 3/4" 275 

LA160MP 1050.0 1168.5 313.5 227.0 1" + 3/4" 300 

LA160ZLP 1098.0 1216.5 313.5 227.0 1" + 3/4" 300 

LG180ZMB 1157.5 1279.5 348.0 322.5 1 1/4" + 3/4" 427 

LG180ZLB 1157.5 1279.5 348.0 322.5 1 1/4" + 3/4" 427 

LG200LB 1162.5 1288.5 385.0 301.0 1 1/4" + 3/4" 477 

K4-LGI225S 1423.0 1662.0 442.0 325.0 2 x 1 1/2" 633 

K4-LGI225ZM 1483.0 1722.0 442.0 325.0 2 x 1 1/2" 679 


4 - 159



Shaft mounted 

KA128 KA 510 

[inch] 



9.45 9.45 2.95 1.38 1.02 2.75 4.331 11.81 10.354 2.35 9.45 3/4-10UNC 3.04 0.63 5.91 4.843 6.06 

Gearcase 


7.48 11.42 10.43 7.48 4.13 5.91 0.79 3.15 3.15 3.54 3.15 11.81 0.67 6.3 14.61 5.71 6.22 

Motor 

KA128 


LA90S 32.26 35.06 6.85 6.42 1/2" + 3/4" 419 

LA90Z 34.04 36.83 6.85 6.42 1/2" + 3/4" 419 

LA100Z 36.71 39.90 7.68 6.61 2 x 3/4" 437 

LA112Z 36.10 39.29 8.62 7.13 2 x 3/4" 463 

LA132SP 37.32 41.34 10.20 7.68 1" + 3/4" 485 

LA132ZMP 39.13 43.15 10.20 7.68 1" + 3/4" 507 

LA160MP 41.48 46.14 12.34 8.94 1" + 3/4" 562 

LA160ZLP 43.37 48.03 12.34 8.94 1" + 3/4" 562 

LG180ZMB 45.71 50.51 13.70 12.70 1 1/4" + 3/4" 842 

LG180ZLB 45.71 50.51 13.70 12.70 1 1/4" + 3/4" 842 

LG200LB 45.91 50.87 15.16 11.85 1" + 3/4" 842 

K4-LGI225S 56.16 65.57 17.40 12.80 2" + 1 1/2" 953 

K4-LGI225ZM 58.52 67.93 17.40 12.80 2" + 1 1/2" 1297 


4 - 160 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


KA128 KA 510 

[mm] 



240 240 75 35 26 69,85 110 300 263 60 240 3/4“-10UNC 77,22 16,002 150 123 154 

Gearcase 


190 290 265 190 105 150 20 80 80 90 80 300 17 160 371 145 158 

Motor 

B A 

KA128 


LA90S 819.5 890.5 174.0 163.0 1/2" + 3/4" 190 

LA90Z 864.5 935.5 174.0 163.0 1/2" + 3/4" 190 

LA100Z 932.5 1013.5 195.0 168.0 2 x 3/4" 198 

LA112Z 917.0 998.0 219.0 181.0 2 x 3/4" 210 

LA132SP 948.0 1050.0 259.0 195.0 1" + 3/4" 220 

LA132ZMP 994.0 1096.0 259.0 195.0 1" + 3/4" 230 

LA160MP 1053.5 1172.0 313.5 227.0 1" + 3/4" 255 

LA160ZLP 1101.5 1220.0 313.5 227.0 1" + 3/4" 255 

LG180ZMB 1161.0 1283.0 348.0 322.5 1 1/4" + 3/4" 382 

LG180ZLB 1161.0 1283.0 348.0 322.5 1 1/4" + 3/4" 382 

LG200LB 1166.0 1292.0 385.0 301.0 1 1/4" + 3/4" 432 

K4-LGI225S 1426.5 1665.5 442.0 325.0 2 x 1 1/2" 588 

K4-LGI225ZM 1486.5 1725.5 442.0 325.0 2 x 1 1/2" 634 


4 - 161





[inch] 



11.61 9.06 10.43 0.16 5.71 M16x28 2.75 4.331 11.81 10.354 2.35 9.45 3/4-10UNC 3.04 0.63 5.91 4.843 6.06 



10.43 5.91 0.79 11.81 0.67 6.16 14.61 6.22 1.97 2.2 0.98 13.78 10.04 1.61 1.18 12.91 R1.57 

Motor 

KAD128 


LA90S 32.13 34.92 6.85 6.42 1/2" + 3/4" 450 

LA90Z 33.90 36.69 6.85 6.42 1/2" + 3/4" 450 

LA100Z 36.57 39.76 7.68 6.61 2 x 3/4" 467 

LA112Z 35.96 39.15 8.62 7.13 2 x 3/4" 494 

LA132SP 37.19 41.20 10.20 7.68 1" + 3/4" 518 

LA132ZMP 39.00 43.01 10.20 7.68 1" + 3/4" 538 

LA160MP 41.34 46.00 12.34 8.94 1" + 3/4" 593 

LA160ZLP 43.23 47.89 12.34 8.94 1" + 3/4" 593 

LG180ZMB 45.57 50.37 13.70 12.70 1 1/4" + 3/4" 873 

LG180ZLB 45.57 50.37 13.70 12.70 1 1/4" + 3/4" 873 

LG200LB 45.77 50.73 15.16 11.85 1" + 3/4" 873 

K4-LGI225S 56.02 65.43 17.40 12.80 2" + 1 1/2" 983 

K4-LGI225ZM 58.39 67.80 17.40 12.80 2" + 1 1/2" 1327 


4 - 162 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



295 230 265 4 145 M16x28 69,85 110 300 263 60 240 3/4“-10UNC 77,22 16,002 150 123 154 



265 150 20 300 17 156,5 371 158 50 56 25 350 255 41 30 328 R40 

Motor 

KAD128 


LA90S 816.0 887.0 174.0 163.0 1/2" + 3/4" 204 

LA90Z 861.0 932.0 174.0 163.0 1/2" + 3/4" 204 

LA100Z 929.0 1010.0 195.0 168.0 2 x 3/4" 212 

LA112Z 913.5 994.5 219.0 181.0 2 x 3/4" 224 

LA132SP 944.5 1046.5 259.0 195.0 1" + 3/4" 235 

LA132ZMP 990.5 1092.5 259.0 195.0 1" + 3/4" 244 

LA160MP 1050.0 1168.5 313.5 227.0 1" + 3/4" 269 

LA160ZLP 1098.0 1216.5 313.5 227.0 1" + 3/4" 269 

LG180ZMB 1157.5 1279.5 348.0 322.5 1 1/4" + 3/4" 396 

LG180ZLB 1157.5 1279.5 348.0 322.5 1 1/4" + 3/4" 396 

LG200LB 1162.5 1288.5 385.0 301.0 1 1/4" + 3/4" 446 

K4-LGI225S 1423.0 1662.0 442.0 325.0 2 x 1 1/2" 602 

K4-LGI225ZM 1483.0 1722.0 442.0 325.0 2 x 1 1/2" 648 


4 - 163





[inch] 



17.72 13.78 0.87 15.75 0.2 7.54 0.69 2.75 4.331 11.81 10.354 2.35 9.45 3/4-10UNC 3.04 0.63 5.91 4.843 6.06 

Gearcase 


9.76 3.27 7.68 10.04 10.43 5.91 0.79 3.15 11.81 0.67 6.16 14.61 5.71 6.22 M20x34 

Motor 

KAF128 


LA90S 32.13 34.92 6.85 6.42 1/2" + 3/4" 474 

LA90Z 33.90 36.69 6.85 6.42 1/2" + 3/4" 474 

LA100Z 36.57 39.76 7.68 6.61 2 x 3/4" 492 

LA112Z 35.96 39.15 8.62 7.13 2 x 3/4" 518 

LA132SP 37.19 41.20 10.20 7.68 1" + 3/4" 542 

LA132ZMP 39.00 43.01 10.20 7.68 1" + 3/4" 562 

LA160MP 41.34 46.00 12.34 8.94 1" + 3/4" 617 

LA160ZLP 43.23 47.89 12.34 8.94 1" + 3/4" 617 

LG180ZMB 45.57 50.37 13.70 12.70 1 1/4" + 3/4" 897 

LG180ZLB 45.57 50.37 13.70 12.70 1 1/4" + 3/4" 897 

LG200LB 45.77 50.73 15.16 11.85 1" + 3/4" 897 

K4-LGI225S 56.02 65.43 17.40 12.80 2" + 1 1/2" 1008 

K4-LGI225ZM 58.39 67.80 17.40 12.80 2" + 1 1/2" 1330 


4 - 164 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



450 350 22 400 5 191,5 17,5 69,85 110 300 263 60 240 3/4“-10UNC 77,22 16,002 150 123 154 

Gearcase 


248 83 195 255 265 150 20 80 300 17 156,5 371 145 158 M20x34 

Motor 

KAF128 


LA90S 816.0 887.0 174.0 163.0 1/2" + 3/4" 215 

LA90Z 861.0 932.0 174.0 163.0 1/2" + 3/4" 215 

LA100Z 929.0 1010.0 195.0 168.0 2 x 3/4" 223 

LA112Z 913.5 994.5 219.0 181.0 2 x 3/4" 235 

LA132SP 944.5 1046.5 259.0 195.0 1" + 3/4" 246 

LA132ZMP 990.5 1092.5 259.0 195.0 1" + 3/4" 255 

LA160MP 1050.0 1168.5 313.5 227.0 1" + 3/4" 280 

LA160ZLP 1098.0 1216.5 313.5 227.0 1" + 3/4" 280 

LG180ZMB 1157.5 1279.5 348.0 322.5 1 1/4" + 3/4" 407 

LG180ZLB 1157.5 1279.5 348.0 322.5 1 1/4" + 3/4" 407 

LG200LB 1162.5 1288.5 385.0 301.0 1 1/4" + 3/4" 457 

K4-LGI225S 1423.0 1662.0 442.0 325.0 2 x 1 1/2" 603 

K4-LGI225ZM 1483.0 1722.0 442.0 325.0 2 x 1 1/2" 659 


4 - 165





[inch] 



11.61 9.06 10.43 0.16 M16x28 2.75 4.331 11.81 10.354 2.35 9.45 3/4-10UNC 3.04 0.63 5.91 4.843 6.06 

Gearcase 


9.76 3.27 7.68 10.04 10.43 5.91 0.79 3.15 11.81 0.67 6.16 14.61 5.71 6.22 M20x34 

Motor 

KAZ128 


LA90S 32.13 34.92 6.85 6.42 1/2" + 3/4" 437 

LA90Z 33.90 36.69 6.85 6.42 1/2" + 3/4" 437 

LA100Z 36.57 39.76 7.68 6.61 2 x 3/4" 454 

LA112Z 35.96 39.15 8.62 7.13 2 x 3/4" 481 

LA132SP 37.19 41.20 10.20 7.68 1" + 3/4" 503 

LA132ZMP 39.00 43.01 10.20 7.68 1" + 3/4" 525 

LA160MP 41.34 46.00 12.34 8.94 1" + 3/4" 580 

LA160ZLP 43.23 47.89 12.34 8.94 1" + 3/4" 580 

LG180ZMB 45.57 50.37 13.70 12.70 1 1/4" + 3/4" 860 

LG180ZLB 45.57 50.37 13.70 12.70 1 1/4" + 3/4" 860 

LG200LB 45.77 50.73 15.16 11.85 1" + 3/4" 860 

K4-LGI225S 56.02 65.43 17.40 12.80 2" + 1 1/2" 970 

K4-LGI225ZM 58.39 67.80 17.40 12.80 2" + 1 1/2" 1314 


4 - 166 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



295 230 265 4 M16x28 69,85 110 300 263 60 240 3/4“-10UNC 77,22 16,002 150 123 154 

Gearcase 


248 83 195 255 265 150 20 80 300 17 156,5 371 145 158 M20x34 

Motor 

KAZ128 


LA90S 816.0 887.0 174.0 163.0 1/2" + 3/4" 198 

LA90Z 861.0 932.0 174.0 163.0 1/2" + 3/4" 198 

LA100Z 929.0 1010.0 195.0 168.0 2 x 3/4" 206 

LA112Z 913.5 994.5 219.0 181.0 2 x 3/4" 218 

LA132SP 944.5 1046.5 259.0 195.0 1" + 3/4" 228 

LA132ZMP 990.5 1092.5 259.0 195.0 1" + 3/4" 238 

LA160MP 1050.0 1168.5 313.5 227.0 1" + 3/4" 263 

LA160ZLP 1098.0 1216.5 313.5 227.0 1" + 3/4" 263 

LG180ZMB 1157.5 1279.5 348.0 322.5 1 1/4" + 3/4" 390 

LG180ZLB 1157.5 1279.5 348.0 322.5 1 1/4" + 3/4" 390 

LG200LB 1162.5 1288.5 385.0 301.0 1 1/4" + 3/4" 440 

K4-LGI225S 1423.0 1662.0 442.0 325.0 2 x 1 1/2" 596 

K4-LGI225ZM 1483.0 1722.0 442.0 325.0 2 x 1 1/2" 642 


4 - 167



Foot mounted 

K148 K 510 

[inch] 

Output Shaft 


3.625 6.69 5.5 0.602 4.01 0.875 8.265 1-8UNC 

Gearcase 


11.02 3.74 10.63 1.57 8.58 13.39 12.4 8.66 5.51 7.09 1.46 4.17 3.54 3.5 3.54 14.17 0.79 7.87 16.61 6.65 7.4 13.58 1.3 

Motor 

K148 


LA100Z 39.92 43.11 7.68 6.61 2 x 3/4" 703 

LA112Z 39.27 42.46 8.62 7.13 2 x 3/4" 730 

LA132SP 40.49 44.51 10.20 7.68 1" + 3/4" 750 

LA132ZMP 42.30 46.32 10.20 7.68 1" + 3/4" 770 

LA160MP 44.41 49.07 12.34 8.94 1" + 3/4" 836 

LA160ZLP 46.30 50.96 12.34 8.94 1" + 3/4" 836 

LG180ZMB 48.76 53.56 13.70 12.70 1 1/4" + 3/4" 1103 

LG180ZLB 48.76 53.56 13.70 12.70 1 1/4" + 3/4" 1103 

LG200LB 48.96 53.92 15.16 11.85 1 1/4" + 3/4" 1213 

LG225S 51.75 61.16 17.40 12.80 2 x 1 1/2" 1380 

LG225ZM 54.11 63.52 17.40 12.80 2 x 1 1/2" 1482 

K4-LGI250ZM 56.08 65.49 17.40 12.80 2 x 1 1/2" 1978 


4 - 168 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Output Shaft 


92,075 170 139,7 15,291 101,85 22,225 210 1“-8UNC 


K148 K 510 

[mm] 

Gearcase 


280 95 270 40 218 340 315 220 140 180 37 106 90 89 90 360 20 200 422 169 188 345 33 

Motor 

B A 

K148 


LA100Z 1014.0 1095.0 195.0 168.0 2 x 3/4" 319 

LA112Z 997.5 1078.5 219.0 181.0 2 x 3/4" 331 

LA132SP 1028.5 1130.5 259.0 195.0 1" + 3/4" 340 

LA132ZMP 1074.5 1176.5 259.0 195.0 1" + 3/4" 349 

LA160MP 1128.0 1246.5 313.5 227.0 1" + 3/4" 379 

LA160ZLP 1176.0 1294.5 313.5 227.0 1" + 3/4" 379 

LG180ZMB 1238.5 1360.5 348.0 322.5 1 1/4" + 3/4" 500 

LG180ZLB 1238.5 1360.5 348.0 322.5 1 1/4" + 3/4" 500 

LG200LB 1243.5 1369.5 385.0 301.0 1 1/4" + 3/4" 550 

LG225S 1314.5 1553.5 442.0 325.0 2 x 1 1/2" 626 

LG225ZM 1374.5 1613.5 442.0 325.0 2 x 1 1/2" 672 

K4-LGI250ZM 1424.5 1663.5 442.0 325.0 2 x 1 1/2" 897 


4 - 169




KF148 KF 510 

[inch] 

Flange 


17.72 13.78 0.87 15.75 0.2 0.69 

Output Shaft 


3.625 6.69 5.5 0.602 4.01 0.875 6.69 1-8UNC 

Gearcase 


11.42 3.94 8.27 11.26 12.4 7.09 1.46 3.54 14.17 0.79 7.72 16.61 6.65 7.4 15.2 M24x41 

Motor 

KF148 


LA100Z 39.76 42.95 7.68 6.61 2 x 3/4" 770 

LA112Z 39.11 42.30 8.62 7.13 2 x 3/4" 796 

LA132SP 40.33 44.35 10.20 7.68 1" + 3/4" 816 

LA132ZMP 42.15 46.16 10.20 7.68 1" + 3/4" 836 

LA160MP 44.25 48.92 12.34 8.94 1" + 3/4" 902 

LA160ZLP 46.14 50.81 12.34 8.94 1" + 3/4" 902 

LG180ZMB 48.60 53.41 13.70 12.70 1 1/4" + 3/4" 1169 

LG180ZLB 48.60 53.41 13.70 12.70 1 1/4" + 3/4" 1169 

LG200LB 48.80 53.76 15.16 11.85 1 1/4" + 3/4" 1279 

LG225S 51.59 61.00 17.40 12.80 2 x 1 1/2" 1446 

LG225ZM 53.96 63.37 17.40 12.80 2 x 1 1/2" 1548 

K4-LGI250ZM 55.93 65.33 17.40 12.80 2 x 1 1/2" 2044 


4 - 170 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


450 350 22 400 5 17,5 

Output Shaft 


92,075 170 139,7 15,291 101,85 22,225 170 14“-8UNC 


KF148 KF 510 

[mm] 

Gearcase 


290 100 210 286 315 180 37 90 360 20 196 422 169 188 386 M24x41 

Motor 

KF148 


LA100Z 1010.0 1091.0 195.0 168.0 2 x 3/4" 349 

LA112Z 993.5 1074.5 219.0 181.0 2 x 3/4" 361 

LA132SP 1024.5 1126.5 259.0 195.0 1" + 3/4" 370 

LA132ZMP 1070.5 1172.5 259.0 195.0 1" + 3/4" 379 

LA160MP 1124.0 1242.5 313.5 227.0 1" + 3/4" 409 

LA160ZLP 1172.0 1290.5 313.5 227.0 1" + 3/4" 409 

LG180ZMB 1234.5 1356.5 348.0 322.5 1 1/4" + 3/4" 530 

LG180ZLB 1234.5 1356.5 348.0 322.5 1 1/4" + 3/4" 530 

LG200LB 1239.5 1365.5 385.0 301.0 1 1/4" + 3/4" 580 

LG225S 1310.5 1549.5 442.0 325.0 2 x 1 1/2" 656 

LG225ZM 1370.5 1609.5 442.0 325.0 2 x 1 1/2" 702 

K4-LGI250ZM 1420.5 1659.5 442.0 325.0 2 x 1 1/2" 927 


4 - 171



Shaft mounted 

KA148 KA 510 

[inch] 



11.02 10.63 3.74 1.57 1.3 3.625 4.724 13.78 12.205 2.1 11.22 1-8UNC 3.84 0.88 6.89 5.827 7.05 

Gearcase 


8.58 13.39 12.4 8.66 5.51 7.09 1.46 4.17 3.54 3.5 3.54 14.17 0.79 7.87 16.61 6.65 7.4 

Motor 

KA148 


LA100Z 39.92 43.11 7.68 6.61 2 x 3/4" 642 

LA112Z 39.27 42.46 8.62 7.13 2 x 3/4" 668 

LA132SP 40.49 44.51 10.20 7.68 1" + 3/4" 688 

LA132ZMP 42.30 46.32 10.20 7.68 1" + 3/4" 708 

LA160MP 44.41 49.07 12.34 8.94 1" + 3/4" 774 

LA160ZLP 46.30 50.96 12.34 8.94 1" + 3/4" 774 

LG180ZMB 48.76 53.56 13.70 12.70 1 1/4" + 3/4" 1041 

LG180ZLB 48.76 53.56 13.70 12.70 1 1/4" + 3/4" 1041 

LG200LB 48.96 53.92 15.16 11.85 1 1/4" + 3/4" 1151 

LG225S 51.75 61.16 17.40 12.80 2 x 1 1/2" 1319 

LG225ZM 54.11 63.52 17.40 12.80 2 x 1 1/2" 1420 

K4-LGI250ZM 56.08 65.49 17.40 12.80 2 x 1 1/2" 1916 


4 - 172 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


KA148 KA 510 

[mm] 

B A 



280 270 95 40 33 92,075 120 350 310 53 285 1“-8UNC 97,54 22,352 175 148 179 

Gearcase 


218 340 315 220 140 180 37 106 90 89 90 360 20 200 422 169 188 

Moto 

KA148 


LA100Z 1014.0 1095.0 195.0 168.0 2 x 3/4" 291 

LA112Z 997.5 1078.5 219.0 181.0 2 x 3/4" 303 

LA132SP 1028.5 1130.5 259.0 195.0 1" + 3/4" 312 

LA132ZMP 1074.5 1176.5 259.0 195.0 1" + 3/4" 321 

LA160MP 1128.0 1246.5 313.5 227.0 1" + 3/4" 351 

LA160ZLP 1176.0 1294.5 313.5 227.0 1" + 3/4" 351 

LG180ZMB 1238.5 1360.5 348.0 322.5 1 1/4" + 3/4" 472 

LG180ZLB 1238.5 1360.5 348.0 322.5 1 1/4" + 3/4" 472 

LG200LB 1243.5 1369.5 385.0 301.0 1 1/4" + 3/4" 522 

LG225S 1314.5 1553.5 442.0 325.0 2 x 1 1/2" 598 

LG225ZM 1374.5 1613.5 442.0 325.0 2 x 1 1/2" 644 

K4-LGI250ZM 1424.5 1663.5 442.0 325.0 2 x 1 1/2" 869 


4 - 173





[inch] 



13.19 9.84 11.81 0.2 6.65 M20x34 3.625 4.724 13.78“ 12.205 2.1 11.22 1-8UNC 3.84 0.88 6.89 5.827 7.05 



12.4 7.09 1.46 14.17 0.79 7.72 16.61 7.4 3.15 3.46 1.57 17.72 11.26 1.77 1.42 14.96 R2.56 

Motor 

KAD148 


LA100Z 39.76 42.95 7.68 6.61 2 x 3/4" 703 

LA112Z 39.11 42.30 8.62 7.13 2 x 3/4" 728 

LA132SP 40.33 44.35 10.20 7.68 1" + 3/4" 747 

LA132ZMP 42.15 46.16 10.20 7.68 1" + 3/4" 770 

LA160MP 44.25 48.92 12.34 8.94 1" + 3/4" 836 

LA160ZLP 46.14 50.81 12.34 8.94 1" + 3/4" 836 

LG180ZMB 48.60 53.41 13.70 12.70 1 1/4" + 3/4" 1103 

LG180ZLB 48.60 53.41 13.70 12.70 1 1/4" + 3/4" 1103 

LG200LB 48.80 53.76 15.16 11.85 1 1/4" + 3/4" 1213 

LG225S 51.59 61.00 17.40 12.80 2 x 1 1/2" 1380 

LG225ZM 53.96 63.37 17.40 12.80 2 x 1 1/2" 1482 

K4-LGI250ZM 55.93 65.33 17.40 12.80 2 x 1 1/2" 1978 


4 - 174 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



335 250 300 5 169 M20x34 92,075 120 350 310 53 285 1“-8UNC 97,54 22,352 175 148 179 



315 180 37 360 20 196 422 188 80 88 40 450 286 45 36 380 R65 

Motor 

KAD148 


LA100Z 1010.0 1091.0 195.0 168.0 2 x 3/4" 319 

LA112Z 993.5 1074.5 219.0 181.0 2 x 3/4" 330 

LA132SP 1024.5 1126.5 259.0 195.0 1" + 3/4" 339 

LA132ZMP 1070.5 1172.5 259.0 195.0 1" + 3/4" 349 

LA160MP 1124.0 1242.5 313.5 227.0 1" + 3/4" 379 

LA160ZLP 1172.0 1290.5 313.5 227.0 1" + 3/4" 379 

LG180ZMB 1234.5 1356.5 348.0 322.5 1 1/4" + 3/4" 500 

LG180ZLB 1234.5 1356.5 348.0 322.5 1 1/4" + 3/4" 500 

LG200LB 1239.5 1365.5 385.0 301.0 1 1/4" + 3/4" 550 

LG225S 1310.5 1549.5 442.0 325.0 2 x 1 1/2" 626 

LG225ZM 1370.5 1609.5 442.0 325.0 2 x 1 1/2" 672 

K4-LGI250ZM 1420.5 1659.5 442.0 325.0 2 x 1 1/2" 897 


4 - 175





[inch] 



17.72 13.78 0.87 15.75 0.2 8.5 0.69 3.625 4.724 13.78 12.205 2.1 11.22 1-8UNC 3.84 0.88 6.89 5.827 7.05 

Gearcase 


11.42 3.94 8.27 11.26 12.4 7.09 1.46 3.54 14.17 0.79 7.72 16.61 6.65 7.4 M24x41 

Motor 

KAF148 


LA100Z 39.76 42.95 7.68 6.61 2 x 3/4" 708 

LA112Z 39.11 42.30 8.62 7.13 2 x 3/4" 734 

LA132SP 40.33 44.35 10.20 7.68 1" + 3/4" 754 

LA132ZMP 42.15 46.16 10.20 7.68 1" + 3/4" 774 

LA160MP 44.25 48.92 12.34 8.94 1" + 3/4" 840 

LA160ZLP 46.14 50.81 12.34 8.94 1" + 3/4" 840 

LG180ZMB 48.60 53.41 13.70 12.70 1 1/4" + 3/4" 1107 

LG180ZLB 48.60 53.41 13.70 12.70 1 1/4" + 3/4" 1107 

LG200LB 48.80 53.76 15.16 11.85 1 1/4" + 3/4" 1217 

LG225S 51.59 61.00 17.40 12.80 2 x 1 1/2" 1385 

LG225ZM 53.96 63.37 17.40 12.80 2 x 1 1/2" 1486 

K4-LGI250ZM 55.93 65.33 17.40 12.80 2 x 1 1/2" 1982 


4 - 176 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



450 350 22 400 5 216 17,5 92,075 120 350 310 53 285 1“-8UNC 97,54 22,352 175 148 179 

Gearcase 


290 100 210 286 315 180 37 90 360 20 196 422 169 188 M24x41 

Motor 

KAF148 


LA100Z 1010.0 1091.0 195.0 168.0 2 x 3/4" 321 

LA112Z 993.5 1074.5 219.0 181.0 2 x 3/4" 333 

LA132SP 1024.5 1126.5 259.0 195.0 1" + 3/4" 342 

LA132ZMP 1070.5 1172.5 259.0 195.0 1" + 3/4" 351 

LA160MP 1124.0 1242.5 313.5 227.0 1" + 3/4" 381 

LA160ZLP 1172.0 1290.5 313.5 227.0 1" + 3/4" 381 

LG180ZMB 1234.5 1356.5 348.0 322.5 1 1/4" + 3/4" 502 

LG180ZLB 1234.5 1356.5 348.0 322.5 1 1/4" + 3/4" 502 

LG200LB 1239.5 1365.5 385.0 301.0 1 1/4" + 3/4" 552 

LG225S 1310.5 1549.5 442.0 325.0 2 x 1 1/2" 628 

LG225ZM 1370.5 1609.5 442.0 325.0 2 x 1 1/2" 674 

K4-LGI250ZM 1420.5 1659.5 442.0 325.0 2 x 1 1/2" 899 


4 - 177





[inch] 



13.19 9.84 11.81 0.2 M20x34 3.625 4.724 13.78 12.205 2.1 11.22 1-8UNC 3.84 0.88 6.89 5.827 7.05 

Gearcase 


11.42 3.94 8.27 11.26 12.4 7.09 1.46 3.54 14.17 0.79 7.72 16.61 6.65 7.4 M24x41 

Motor 

KAZ148 


LA100Z 39.76 42.95 7.68 6.61 2 x 3/4" 666 

LA112Z 39.11 42.30 8.62 7.13 2 x 3/4" 692 

LA132SP 40.33 44.35 10.20 7.68 1" + 3/4" 712 

LA132ZMP 42.15 46.16 10.20 7.68 1" + 3/4" 732 

LA160MP 44.25 48.92 12.34 8.94 1" + 3/4" 798 

LA160ZLP 46.14 50.81 12.34 8.94 1" + 3/4" 798 

LG180ZMB 48.60 53.41 13.70 12.70 1 1/4" + 3/4" 1065 

LG180ZLB 48.60 53.41 13.70 12.70 1 1/4" + 3/4" 1065 

LG200LB 48.80 53.76 15.16 11.85 1 1/4" + 3/4" 1175 

LG225S 51.59 61.00 17.40 12.80 2 x 1 1/2" 1343 

LG225ZM 53.96 63.37 17.40 12.80 2 x 1 1/2" 1444 

K4-LGI250ZM 55.93 65.33 17.40 12.80 2 x 1 1/2" 1940 


4 - 178 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



335 250 300 5 M20x34 92,075 120 350 310 53 285 1“-8UNC 97,54 22,352 175 148 179 

Gearcase 


290 100 210 286 315 180 37 90 360 20 196 422 169 188 M24x41 

Motor 

KAZ148 


LA100Z 1010.0 1091.0 195.0 168.0 2 x 3/4" 302 

LA112Z 993.5 1074.5 219.0 181.0 2 x 3/4" 314 

LA132SP 1024.5 1126.5 259.0 195.0 1" + 3/4" 323 

LA132ZMP 1070.5 1172.5 259.0 195.0 1" + 3/4" 332 

LA160MP 1124.0 1242.5 313.5 227.0 1" + 3/4" 362 

LA160ZLP 1172.0 1290.5 313.5 227.0 1" + 3/4" 362 

LG180ZMB 1234.5 1356.5 348.0 322.5 1 1/4" + 3/4" 483 

LG180ZLB 1234.5 1356.5 348.0 322.5 1 1/4" + 3/4" 483 

LG200LB 1239.5 1365.5 385.0 301.0 1 1/4" + 3/4" 533 

LG225S 1310.5 1549.5 442.0 325.0 2 x 1 1/2" 609 

LG225ZM 1370.5 1609.5 442.0 325.0 2 x 1 1/2" 655 

K4-LGI250ZM 1420.5 1659.5 442.0 325.0 2 x 1 1/2" 880 


4 - 179



Foot mounted 

K168 K 510 

[inch] 

Output Shaft 


4.375 8.27 7 0.677 4.82 1 9.845 1-8UNC 

Gearcase 


13.78 4.53 12.99 1.77 10.43 15.75 14.76 10.43 6.1 8.03 1.97 4.33 4.33 4.33 4.33 16.06 0.87 8.86 19.61 7.83 8.86 16.34 1.54 

Motor 

K168 


LA132SP 44.15 48.17 10.20 7.68 1" + 3/4" 1127 

LA132ZMP 45.96 49.98 10.20 7.68 1" + 3/4" 1147 

LA160MP 48.09 52.76 12.34 8.94 1" + 3/4" 1202 

LA160ZLP 49.98 54.65 12.34 8.94 1" + 3/4" 1202 

LG180ZMB 52.44 57.24 13.70 12.70 1 1/4" + 3/4" 1480 

LG180ZLB 52.44 57.24 13.70 12.70 1 1/4" + 3/4" 1480 

LG200LB 52.64 57.60 15.16 11.85 1 1/4" + 3/4" 1590 

LG225S 55.43 64.84 17.40 12.80 2 x 1 1/2" 1751 

LG225ZM 57.80 67.20 17.40 12.80 2 x 1 1/2" 1852 

LG250ZM 59.76 69.17 17.40 12.80 2 x 1 1/2" 2176 

K4-LGI280ZM 74.43 83.37 21.85 17.01 2 x 2 1/2" 2679 


4 - 180 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Output Shaft 


111,125 210 177,8 17,196 122,43 25,4 250 1“-8UNC 


K168 K 510 

[mm] 

Gearcase 


350 115 330 45 265 400 375 265 155 204 50 110 110 110 110 408 22 225 498 199 225 415 39 

Motor 

B A 

K168 


LA132SP 1121.5 1223.5 259.0 195.0 1" + 3/4" 511 

LA132ZMP 1167.5 1269.5 259.0 195.0 1" + 3/4" 520 

LA160MP 1221.5 1340.0 313.5 227.0 1" + 3/4" 545 

LA160ZLP 1269.5 1388.0 313.5 227.0 1" + 3/4" 545 

LG180ZMB 1332.0 1454.0 348.0 322.5 1 1/4" + 3/4" 671 

LG180ZLB 1332.0 1454.0 348.0 322.5 1 1/4" + 3/4" 671 

LG200LB 1337.0 1463.0 385.0 301.0 1 1/4" + 3/4" 721 

LG225S 1408.0 1647.0 442.0 325.0 2 x 1 1/2" 794 

LG225ZM 1468.0 1707.0 442.0 325.0 2 x 1 1/2" 840 

LG250ZM 1518.0 1757.0 442.0 325.0 2 x 1 1/2" 987 

K4-LGI280ZM 1890.5 2117.5 555.0 432.0 2 x 2 1/2" 1215 


4 - 181




KF168 KF 510 

[inch] 

Flange 


21.65 17.72 0.98 19.69 0.2 0.69 

Output Shaft 


4.375 8.27 7 0.677 4.82 1 8.27 1-8UNC 

Gearcase 


13.78 4.53 9.45 12.76 14.76 8.03 1.97 4.33 16.06 0.87 8.68 19.61 7.83 8.86 18.35 M30x48 

Motor 

KF168 


LA132SP 43.98 47.99 10.20 7.68 1" + 3/4" 1263 

LA132ZMP 45.79 49.80 10.20 7.68 1" + 3/4" 1283 

LA160MP 47.91 52.58 12.34 8.94 1" + 3/4" 1338 

LA160ZLP 49.80 54.47 12.34 8.94 1" + 3/4" 1338 

LG180ZMB 52.26 57.07 13.70 12.70 1 1/4" + 3/4" 1616 

LG180ZLB 52.26 57.07 13.70 12.70 1 1/4" + 3/4" 1616 

LG200LB 52.46 57.42 15.16 11.85 1 1/4" + 3/4" 1727 

LG225S 55.26 64.67 17.40 12.80 2 x 1 1/2" 1887 

LG225ZM 57.62 67.03 17.40 12.80 2 x 1 1/2" 1991 

LG250ZM 59.59 69.00 17.40 12.80 2 x 1 1/2" 2315 

K4-LGI280ZM 74.25 83.19 21.85 17.01 2 x 2 1/2" 2818 


4 - 182 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


550 450 25 500 5 17,5 

Output Shaft 


111,125 210 177,8 17,196 122,43 25,4 210 1“-8UNC 


KF168 KF 510 

[mm] 

Gearcase 


350 115 240 324 375 204 50 110 408 22 220,5 498 199 225 466 M30x48 

Motor 

KF168 


LA132SP 1117.0 1219.0 259.0 195.0 1" + 3/4" 573 

LA132ZMP 1163.0 1265.0 259.0 195.0 1" + 3/4" 582 

LA160MP 1217.0 1335.5 313.5 227.0 1" + 3/4" 607 

LA160ZLP 1265.0 1383.5 313.5 227.0 1" + 3/4" 607 

LG180ZMB 1327.5 1449.5 348.0 322.5 1 1/4" + 3/4" 733 

LG180ZLB 1327.5 1449.5 348.0 322.5 1 1/4" + 3/4" 733 

LG200LB 1332.5 1458.5 385.0 301.0 1 1/4" + 3/4" 783 

LG225S 1403.5 1642.5 442.0 325.0 2 x 1 1/2" 856 

LG225ZM 1463.5 1702.5 442.0 325.0 2 x 1 1/2" 903 

LG250ZM 1513.5 1752.5 442.0 325.0 2 x 1 1/2" 1050 

K4-LGI280ZM 1886.0 2113.0 555.0 432.0 2 x 2 1/2" 1278 


4 - 183



Shaft mounted 

KA168 KA 510 

[inch] 



13.78 12.99 4.53 1.77 1.54 4 5.906 16.14 14.409 2.09 13.39 1-8UNC 4.45 1 8.07 6.89 8.23 

Gearcase 


10.43 15.75 14.76 10.43 6.1 8.03 1.97 4.33 4.33 4.33 4.33 16.06 0.87 8.86 19.61 7.83 8.86 

Motor 

KA168 


LA132SP 44.15 48.17 10.20 7.68 1" + 3/4" 1065 

LA132ZMP 45.96 49.98 10.20 7.68 1" + 3/4" 1085 

LA160MP 48.09 52.76 12.34 8.94 1" + 3/4" 1140 

LA160ZLP 49.98 54.65 12.34 8.94 1" + 3/4" 1140 

LG180ZMB 52.44 57.24 13.70 12.70 1 1/4" + 3/4" 1418 

LG180ZLB 52.44 57.24 13.70 12.70 1 1/4" + 3/4" 1418 

LG200LB 52.64 57.60 15.16 11.85 1 1/4" + 3/4" 1528 

LG225S 55.43 64.84 17.40 12.80 2 x 1 1/2" 1689 

LG225ZM 57.80 67.20 17.40 12.80 2 x 1 1/2" 1790 

LG250ZM 59.76 69.17 17.40 12.80 2 x 1 1/2" 2115 

K4-LGI280ZM 74.43 83.37 21.85 17.01 2 x 2 1/2" 2617 


4 - 184 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


KA168 KA 510 

[mm] 

B A 



350 330 115 45 39 101,6 150 410 366 53 340 1“-8UNC 113,03 25,4 205 175 209 

Gearcase 


265 400 375 265 155 204 50 110 110 110 110 408 22 225 498 199 225 

Motor 

KA168 


LA132SP 1121.5 1223.5 259.0 195.0 1" + 3/4" 483 

LA132ZMP 1167.5 1269.5 259.0 195.0 1" + 3/4" 492 

LA160MP 1221.5 1340.0 313.5 227.0 1" + 3/4" 517 

LA160ZLP 1269.5 1388.0 313.5 227.0 1" + 3/4" 517 

LG180ZMB 1332.0 1454.0 348.0 322.5 1 1/4" + 3/4" 643 

LG180ZLB 1332.0 1454.0 348.0 322.5 1 1/4" + 3/4" 643 

LG200LB 1337.0 1463.0 385.0 301.0 1 1/4" + 3/4" 693 

LG225S 1408.0 1647.0 442.0 325.0 2 x 1 1/2" 766 

LG225ZM 1468.0 1707.0 442.0 325.0 2 x 1 1/2" 812 

LG250ZM 1518.0 1757.0 442.0 325.0 2 x 1 1/2" 959 

K4-LGI280ZM 1890.5 2117.5 555.0 432.0 2 x 2 1/2" 1187 


4 - 185





[inch] 



15.75 11.81 13.78 0.2 7.83 M20x34 4 5.906 16.14 14.409 2.09 13.39 1-8UNC 4.45 1 8.07 6.89 8.23 



14.76 8.03 1.97 16.06 0.87 8.68 19.61 8.86 3.15 3.46 1.57 21.65 12.76 2.36 1.57 18.11 R2.56 

Motor 

KAD168 


LA132SP 43.98 47.99 10.20 7.68 1" + 3/4" 1144 

LA132ZMP 45.79 49.80 10.20 7.68 1" + 3/4" 1166 

LA160MP 47.91 52.58 12.34 8.94 1" + 3/4" 1219 

LA160ZLP 49.80 54.47 12.34 8.94 1" + 3/4" 1219 

LG180ZMB 52.26 57.07 13.70 12.70 1 1/4" + 3/4" 1497 

LG180ZLB 52.26 57.07 13.70 12.70 1 1/4" + 3/4" 1497 

LG200LB 52.46 57.42 15.16 11.85 1 1/4" + 3/4" 1607 

LG225S 55.26 64.67 17.40 12.80 2 x 1 1/2" 1768 

LG225ZM 57.62 67.03 17.40 12.80 2 x 1 1/2" 1876 

LG250ZM 59.59 69.00 17.40 12.80 2 x 1 1/2" 2196 

K4-LGI280ZM 74.25 83.19 21.85 17.01 2 x 2 1/2" 2699 


4 - 186 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



400 300 350 5 199 M20x34 101,6 150 410 366 53 340 1“-8UNC 113,03 25,4 205 175 209 



375 204 50 408 22 220,5 498 225 80 88 40 550 324 60 40 460 R65 

Motor 

KAD168 


LA132SP 1117.0 1219.0 259.0 195.0 1" + 3/4" 519 

LA132ZMP 1163.0 1265.0 259.0 195.0 1" + 3/4" 529 

LA160MP 1217.0 1335.5 313.5 227.0 1" + 3/4" 553 

LA160ZLP 1265.0 1383.5 313.5 227.0 1" + 3/4" 553 

LG180ZMB 1327.5 1449.5 348.0 322.5 1 1/4" + 3/4" 679 

LG180ZLB 1327.5 1449.5 348.0 322.5 1 1/4" + 3/4" 679 

LG200LB 1332.5 1458.5 385.0 301.0 1 1/4" + 3/4" 729 

LG225S 1403.5 1642.5 442.0 325.0 2 x 1 1/2" 802 

LG225ZM 1463.5 1702.5 442.0 325.0 2 x 1 1/2" 851 

LG250ZM 1513.5 1752.5 442.0 325.0 2 x 1 1/2" 996 

K4-LGI280ZM 1886.0 2113.0 555.0 432.0 2 x 2 1/2" 1224 


4 - 187





[inch] 



21.65 17.72 0.98 19.69 0.2 10.08 0.69 4 5.906 16.14 14.409 2.09 13.39 1-8UNC 4.45 1 8.07 6.89 8.23 

Gearcase 


13.78 4.53 9.45 12.76 14.76 8.03 1.97 4.33 16.06 0.87 8.68 19.61 7.83 8.86 M30x48 

Motor 

KAF168 


LA132SP 43.98 47.99 10.20 7.68 1" + 3/4" 1164 

LA132ZMP 45.79 49.80 10.20 7.68 1" + 3/4" 1184 

LA160MP 47.91 52.58 12.34 8.94 1" + 3/4" 1239 

LA160ZLP 49.80 54.47 12.34 8.94 1" + 3/4" 1239 

LG180ZMB 52.26 57.07 13.70 12.70 1 1/4" + 3/4" 1517 

LG180ZLB 52.26 57.07 13.70 12.70 1 1/4" + 3/4" 1517 

LG200LB 52.46 57.42 15.16 11.85 1 1/4" + 3/4" 1627 

LG225S 55.26 64.67 17.40 12.80 2 x 1 1/2" 1788 

LG225ZM 57.62 67.03 17.40 12.80 2 x 1 1/2" 1892 

LG250ZM 59.59 69.00 17.40 12.80 2 x 1 1/2" 2216 

K4-LGI280ZM 74.25 83.19 21.85 17.01 2 x 2 1/2" 2719 


4 - 188 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



550 450 25 500 5 256 17,5 101,6 150 410 366 53 340 1“-8UNC 113,03 25,4 205 175 209 

Gearcase 


350 115 240 324 375 204 50 110 408 22 220,5 498 199 225 M30x48 

Motor 

KAF168 


LA132SP 1117.0 1219.0 259.0 195.0 1" + 3/4" 528 

LA132ZMP 1163.0 1265.0 259.0 195.0 1" + 3/4" 537 

LA160MP 1217.0 1335.5 313.5 227.0 1" + 3/4" 562 

LA160ZLP 1265.0 1383.5 313.5 227.0 1" + 3/4" 562 

LG180ZMB 1327.5 1449.5 348.0 322.5 1 1/4" + 3/4" 688 

LG180ZLB 1327.5 1449.5 348.0 322.5 1 1/4" + 3/4" 688 

LG200LB 1332.5 1458.5 385.0 301.0 1 1/4" + 3/4" 738 

LG225S 1403.5 1642.5 442.0 325.0 2 x 1 1/2" 811 

LG225ZM 1463.5 1702.5 442.0 325.0 2 x 1 1/2" 858 

LG250ZM 1513.5 1752.5 442.0 325.0 2 x 1 1/2" 1005 

K4-LGI280ZM 1886.0 2113.0 555.0 432.0 2 x 2 1/2" 1233 


4 - 189





[inch] 



15.75 11.81 13.78 0.2 M20x34 4 5.906 16.14 14.409 2.09 13.39 1-8UNC 4.45 1 8.07 6.89 8.23 

Gearcase 


13.78 4.53 9.45 12.76 14.76 8.03 1.97 4.33 16.06 0.87 8.68 19.61 7.83 8.86 M30x48 

Motor 

KAZ168 


LA132SP 43.98 47.99 10.20 7.68 1" + 3/4" 1094 

LA132ZMP 45.79 49.80 10.20 7.68 1" + 3/4" 1114 

LA160MP 47.91 52.58 12.34 8.94 1" + 3/4" 1169 

LA160ZLP 49.80 54.47 12.34 8.94 1" + 3/4" 1169 

LG180ZMB 52.26 57.07 13.70 12.70 1 1/4" + 3/4" 1444 

LG180ZLB 52.26 57.07 13.70 12.70 1 1/4" + 3/4" 1444 

LG200LB 52.46 57.42 15.16 11.85 1 1/4" + 3/4" 1555 

LG225S 55.26 64.67 17.40 12.80 2 x 1 1/2" 1715 

LG225ZM 57.62 67.03 17.40 12.80 2 x 1 1/2" 1819 

LG250ZM 59.59 69.00 17.40 12.80 2 x 1 1/2" 2143 

K4-LGI280ZM 74.25 83.19 21.85 17.01 2 x 2 1/2" 2646 


4 - 190 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



400 300 350 5 M20x34 101,6 150 410 366 53 340 1“-8UNC 113,03 25,4 205 175 209 

Gearcase 


350 115 240 324 375 204 50 110 408 22 220,5 498 199 225 M30x48 

Motor 

KAZ168 


LA132SP 1117.0 1219.0 259.0 195.0 1" + 3/4" 496 

LA132ZMP 1163.0 1265.0 259.0 195.0 1" + 3/4" 505 

LA160MP 1217.0 1335.5 313.5 227.0 1" + 3/4" 530 

LA160ZLP 1265.0 1383.5 313.5 227.0 1" + 3/4" 530 

LG180ZMB 1327.5 1449.5 348.0 322.5 1 1/4" + 3/4" 655 

LG180ZLB 1327.5 1449.5 348.0 322.5 1 1/4" + 3/4" 655 

LG200LB 1332.5 1458.5 385.0 301.0 1 1/4" + 3/4" 705 

LG225S 1403.5 1642.5 442.0 325.0 2 x 1 1/2" 778 

LG225ZM 1463.5 1702.5 442.0 325.0 2 x 1 1/2" 825 

LG250ZM 1513.5 1752.5 442.0 325.0 2 x 1 1/2" 972 

K4-LGI280ZM 1886.0 2113.0 555.0 432.0 2 x 2 1/2" 1200 


4 - 191



Foot mounted 

K188 K 510 

[inch] 

Output Shaft 


4.75 8.27 7 0.677 5.29 1.25 9.84 1-8UNC 

Gearcase 

E FA F G JE B D FC FB PB2 DB JB JA JC JD PB1 QC QB WG P2 EA H 

14.96 5.51 16.54 1.97 13.39 19.69 17.72 12.6 7.09 8.86 2.7 5.12 5.12 5.12 5.12 17.72 11.02 21.1 9.49 10.06 18.11 1.54 

Motor 

K188 


LA132SP 47.24 51.26 10.20 7.68 1" + 3/4" 1713 

LA132ZMP 49.06 53.07 10.20 7.68 1" + 3/4" 1735 

LA160MP 51.18 55.85 12.34 8.94 1" + 3/4" 1788 

LA160ZLP 53.07 57.74 12.34 8.94 1" + 3/4" 1788 

LG180ZMB 55.53 60.33 13.70 12.70 1 1/4" + 3/4" 2066 

LG180ZLB 55.53 60.33 13.70 12.70 1 1/4" + 3/4" 2066 

LG200LB 55.73 60.69 15.16 11.85 1 1/4" + 3/4" 2176 

LG225S 58.52 67.93 17.40 12.80 2 x 1 1/2" 2335 

LG225ZM 60.89 70.30 17.40 12.80 2 x 1 1/2" 2437 

LG250ZM 62.85 72.26 17.40 12.80 2 x 1 1/2" 2761 

K4-LGI280ZM 77.54 86.48 21.85 17.01 2 x 2 1/2" 3246 


4 - 192 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Foot mounted 

Output Shaft 


120,65 210 177,8 17,196 134,37 31,75 250 1“-8UNC 


K188 K 510 

[mm] 

B A 

Gearcase 

E FA F G JE B D FC FB PB2 DB JB JA JC JD PB1 QC QB WG P2 EA H 

380 140 420 50 340 500 450 320 180 225 68,5 130 130 130 130 450 280 536 241 255,5 460 39 

Motor 

K188 


LA132SP 1200.0 1302.0 259.0 195.0 1" + 3/4" 777 

LA132ZMP 1246.0 1348.0 259.0 195.0 1" + 3/4" 787 

LA160MP 1300.0 1418.5 313.5 227.0 1" + 3/4" 811 

LA160ZLP 1348.0 1466.5 313.5 227.0 1" + 3/4" 811 

LG180ZMB 1410.5 1532.5 348.0 322.5 1 1/4" + 3/4" 937 

LG180ZLB 1410.5 1532.5 348.0 322.5 1 1/4" + 3/4" 937 

LG200LB 1415.5 1541.5 385.0 301.0 1 1/4" + 3/4" 987 

LG225S 1486.5 1725.5 442.0 325.0 2 x 1 1/2" 1059 

LG225ZM 1546.5 1785.5 442.0 325.0 2 x 1 1/2" 1105 

LG250ZM 1596.5 1835.5 442.0 325.0 2 x 1 1/2" 1252 

K4-LGI280ZM 1969.5 2196.5 555.0 432.0 2 x 2 1/2" 1472 


4 - 193




KF188 KF 510 

[inch] 

Flange 


25.98 21.65 1.1 23.62 0.24 0.87 

Output Shaft 


4.75 8.27 7 0.677 5.29 1.25 8.27 1-8UNC 

Gearcase 

E FA F G JE B D PB2 DB JB JA PB1 QC QB WG P2 EA H 

14.96 5.51 16.54 1.97 13.39 19.69 17.72 8.86 2.7 5.12 5.12 17.72 11.02 21.1 9.49 10.06 20.12 1.54 

Motor 

KF188 


LA132SP 47.24 51.26 10.20 7.68 1" + 3/4" 1835 

LA132ZMP 49.06 53.07 10.20 7.68 1" + 3/4" 1854 

LA160MP 51.18 55.85 12.34 8.94 1" + 3/4" 1910 

LA160ZLP 53.07 57.74 12.34 8.94 1" + 3/4" 1910 

LG180ZMB 55.53 60.33 13.70 12.70 1 1/4" + 3/4" 2185 

LG180ZLB 55.53 60.33 13.70 12.70 1 1/4" + 3/4" 2185 

LG200LB 55.73 60.69 15.16 11.85 1 1/4" + 3/4" 2295 

LG225S 58.52 67.93 17.40 12.80 2 x 1 1/2" 2454 

LG225ZM 60.89 70.30 17.40 12.80 2 x 1 1/2" 2556 

LG250ZM 62.85 72.26 17.40 12.80 2 x 1 1/2" 2880 

K4-LGI280ZM 77.54 86.48 21.85 17.01 2 x 2 1/2" 3365 


4 - 194 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


660 550 28 600 6 22 

Output Shaft 


120,65 210 177,8 17,196 134,37 31,75 210 1“-8UNC 


KF188 KF 510 

[mm] 

Gearcase 

E FA F G JE B D PB2 DB JB JA PB1 QC QB WG P2 EA H 

380 140 420 50 340 500 450 225 68,5 130 130 450 280 536 241 255,5 511 39 

Motor 

KF188 


LA132SP 1200.0 1302.0 259.0 195.0 1" + 3/4" 832 

LA132ZMP 1246.0 1348.0 259.0 195.0 1" + 3/4" 841 

LA160MP 1300.0 1418.5 313.5 227.0 1" + 3/4" 866 

LA160ZLP 1348.0 1466.5 313.5 227.0 1" + 3/4" 866 

LG180ZMB 1410.5 1532.5 348.0 322.5 1 1/4" + 3/4" 991 

LG180ZLB 1410.5 1532.5 348.0 322.5 1 1/4" + 3/4" 991 

LG200LB 1415.5 1541.5 385.0 301.0 1 1/4" + 3/4" 1041 

LG225S 1486.5 1725.5 442.0 325.0 2 x 1 1/2" 1113 

LG225ZM 1546.5 1785.5 442.0 325.0 2 x 1 1/2" 1159 

LG250ZM 1596.5 1835.5 442.0 325.0 2 x 1 1/2" 1306 

K4-LGI280ZM 1969.5 2196.5 555.0 432.0 2 x 2 1/2" 1526 


4 - 195



Shaft mounted 

KA188 KA 510 

[inch] 


AK BD BB AJ TAP BF U UF VC VG VH VL M BOLT UY Y EA EB Q1 

11.81 15.75 0.2 13.78 M24x32 4.5 6.299 19.685 18.11 3.134 16.93 1-8UNC 4.959 1 9.84 8.661 10.2 

Gearcase 

E F FA G JE B D FC FB PB2 DB JB JA JC JD PB1 QC QB WG P2 H 

14.96 16.54 5.51 1.97 13.39 19.69 17.72 12.6 7.09 8.86 2.7 5.12 5.12 5.12 5.12 17.72 11.02 21.1 9.49 10.06 1.54 

Motor 

KA188 


LA132SP 47.24 51.26 10.20 7.68 1" + 3/4" 1486 

LA132ZMP 49.06 53.07 10.20 7.68 1" + 3/4" 1506 

LA160MP 51.18 55.85 12.34 8.94 1" + 3/4" 1559 

LA160ZLP 53.07 57.74 12.34 8.94 1" + 3/4" 1559 

LG180ZMB 55.53 60.33 13.70 12.70 1 1/4" + 3/4" 1837 

LG180ZLB 55.53 60.33 13.70 12.70 1 1/4" + 3/4" 1837 

LG200LB 55.73 60.69 15.16 11.85 1 1/4" + 3/4" 1947 

LG225S 58.52 67.93 17.40 12.80 2 x 1 1/2" 2106 

LG225ZM 60.89 70.30 17.40 12.80 2 x 1 1/2" 2207 

LG250ZM 62.85 72.26 17.40 12.80 2 x 1 1/2" 2531 

K4-LGI280ZM 77.54 86.48 21.85 17.01 2 x 2 1/2" 3016 


4 - 196 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


KA188 KA 510 

[mm] 


AK BD BB AJ TAP BF U UF VC VG VH VL M BOLT UY Y EA EB Q1 

300 400 5 350 M24x32 114,3 160 500 460 80 430 1“-8UNC 125,96 25,4 250 220 259 

Gearcase 

E F FA G JE B D FC FB PB2 DB JB JA JC JD PB1 QC QB WG P2 H 

380 420 140 50 340 500 450 320 180 225 68,5 130 130 130 130 450 280 536 241 255,5 39 

Motor 

B A 

KA188 


LA132SP 1200.0 1302.0 259.0 195.0 1" + 3/4" 674 

LA132ZMP 1246.0 1348.0 259.0 195.0 1" + 3/4" 683 

LA160MP 1300.0 1418.5 313.5 227.0 1" + 3/4" 707 

LA160ZLP 1348.0 1466.5 313.5 227.0 1" + 3/4" 707 

LG180ZMB 1410.5 1532.5 348.0 322.5 1 1/4" + 3/4" 833 

LG180ZLB 1410.5 1532.5 348.0 322.5 1 1/4" + 3/4" 833 

LG200LB 1415.5 1541.5 385.0 301.0 1 1/4" + 3/4" 883 

LG225S 1486.5 1725.5 442.0 325.0 2 x 1 1/2" 955 

LG225ZM 1546.5 1785.5 442.0 325.0 2 x 1 1/2" 1001 

LG250ZM 1596.5 1835.5 442.0 325.0 2 x 1 1/2" 1148 

K4-LGI280ZM 1969.5 2196.5 555.0 432.0 2 x 2 1/2" 1368 


4 - 197





[inch] 



15.75 11.81 13.78 0.2 9.49 M24x32 4.5 6.299 19.685 18.11 3.134 16.93 1-8UNC 4.959 1 9.84 8.661 10.2 


D PB2 DB PB1 QC QB P2 FN FV GF SB B FD GT OT R JE 

17.72 8.86 2.7 17.72 11.02 21.1 10.06 4.65 4.72 2.76 27.56 19.69 1.97 1.77 20.08 R4.13 5.08 

Motor 

KAD188 


LA132SP 47.24 51.26 10.20 7.68 1" + 3/4" 1537 

LA132ZMP 49.06 53.07 10.20 7.68 1" + 3/4" 1557 

LA160MP 51.18 55.85 12.34 8.94 1" + 3/4" 1612 

LA160ZLP 53.07 57.74 12.34 8.94 1" + 3/4" 1612 

LG180ZMB 55.53 60.33 13.70 12.70 1 1/4" + 3/4" 1887 

LG180ZLB 55.53 60.33 13.70 12.70 1 1/4" + 3/4" 1887 

LG200LB 55.73 60.69 15.16 11.85 1 1/4" + 3/4" 1998 

LG225S 58.52 67.93 17.40 12.80 2 x 1 1/2" 2156 

LG225ZM 60.89 70.30 17.40 12.80 2 x 1 1/2" 2258 

LG250ZM 62.85 72.26 17.40 12.80 2 x 1 1/2" 2582 

K4-LGI280ZM 77.54 86.48 21.85 17.01 2 x 2 1/2" 3067 


4 - 198 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



400 300 350 5 241 M24x32 114,3 160 500 460 80 430 1“-8UNC 125,96 25,4 250 220 259 


D PB2 DB PB1 QC QB P2 FN FV GF SB B FD GT OT R JE 

450 225 68,5 450 280 536 255,5 118 120 70 700 500 50 45 510 R105 129 

Motor 

KAD188 


LA132SP 1200.0 1302.0 259.0 195.0 1" + 3/4" 697 

LA132ZMP 1246.0 1348.0 259.0 195.0 1" + 3/4" 706 

LA160MP 1300.0 1418.5 313.5 227.0 1" + 3/4" 731 

LA160ZLP 1348.0 1466.5 313.5 227.0 1" + 3/4" 731 

LG180ZMB 1410.5 1532.5 348.0 322.5 1 1/4" + 3/4" 856 

LG180ZLB 1410.5 1532.5 348.0 322.5 1 1/4" + 3/4" 856 

LG200LB 1415.5 1541.5 385.0 301.0 1 1/4" + 3/4" 906 

LG225S 1486.5 1725.5 442.0 325.0 2 x 1 1/2" 978 

LG225ZM 1546.5 1785.5 442.0 325.0 2 x 1 1/2" 1024 

LG250ZM 1596.5 1835.5 442.0 325.0 2 x 1 1/2" 1171 

K4-LGI280ZM 1969.5 2196.5 555.0 432.0 2 x 2 1/2" 1391 


4 - 199





[inch] 



25.98 21.65 1.1 23.62 0.24 12.2 0.87 4.5 6.299 19.685“ 18.11 3.134 16.93 1-8UNC 4.959 1 9.84 8.661 10.2 

Gearcase 

E FA F B JE G D PB2 DB JB JA PB1 QC QB WG P2 H 

14.96 5.51 16.54 19.69 13.38 1.97 17.72 8.86 2.7 5.12 5.12 17.72 11.02 21.1 9.49 10.06 1.535 

Motor 

KAF188 


LA132SP 47.24 51.26 10.20 7.68 1" + 3/4" 1557 

LA132ZMP 49.06 53.07 10.20 7.68 1" + 3/4" 1577 

LA160MP 51.18 55.85 12.34 8.94 1" + 3/4" 1632 

LA160ZLP 53.07 57.74 12.34 8.94 1" + 3/4" 1632 

LG180ZMB 55.53 60.33 13.70 12.70 1 1/4" + 3/4" 1907 

LG180ZLB 55.53 60.33 13.70 12.70 1 1/4" + 3/4" 1907 

LG200LB 55.73 60.69 15.16 11.85 1 1/4" + 3/4" 2018 

LG225S 58.52 67.93 17.40 12.80 2 x 1 1/2" 2176 

LG225ZM 60.89 70.30 17.40 12.80 2 x 1 1/2" 2278 

LG250ZM 62.85 72.26 17.40 12.80 2 x 1 1/2" 2602 

K4-LGI280ZM 77.54 86.48 21.85 17.01 2 x 2 1/2" 3087 


4 - 200 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 

B A 



660 550 28 600 6 310 22 114,3 160 500 460 80 430 1“-8UNC 125,96 25,4 250 220 259 

Gearcase 

E FA F B JE G D PB2 DB JB JA PB1 QC QB WG P2 H 

380 140 420 500 340 50 450 225 68,5 130 130 450 280 536 241 255,5 39 

Motor 

KAF188 


LA132SP 1200.0 1302.0 259.0 195.0 1" + 3/4" 706 

LA132ZMP 1246.0 1348.0 259.0 195.0 1" + 3/4" 715 

LA160MP 1300.0 1418.5 313.5 227.0 1" + 3/4" 740 

LA160ZLP 1348.0 1466.5 313.5 227.0 1" + 3/4" 740 

LG180ZMB 1410.5 1532.5 348.0 322.5 1 1/4" + 3/4" 865 

LG180ZLB 1410.5 1532.5 348.0 322.5 1 1/4" + 3/4" 865 

LG200LB 1415.5 1541.5 385.0 301.0 1 1/4" + 3/4" 915 

LG225S 1486.5 1725.5 442.0 325.0 2 x 1 1/2" 987 

LG225ZM 1546.5 1785.5 442.0 325.0 2 x 1 1/2" 1033 

LG250ZM 1596.5 1835.5 442.0 325.0 2 x 1 1/2" 1180 

K4-LGI280ZM 1969.5 2196.5 555.0 432.0 2 x 2 1/2" 1400 


4 - 201





[inch] 



15.75 11.81 13.78 0.2 M24x32 4.5“ 6.299 19.685“ 18.11 3.134 16.93 1-8UNC 4.959 1 9.84 8.661 10.2 

Gearcase 

E FA F FC FB G JE B D PB2 DB JB JA JC JD PB1 QC QB WG P2 H 

14.96 5.51 11.02 12.6 7.09 1.97 13.38 19.69 17.72 8.86 2.7 5.12 5.12 5.12 5.12 17.72 11.02 21.1 9.49 10.06 1.54 

Motor 

KAZ188 


LA132SP 47.24 51.26 10.20 7.68 1" + 3/4" 1486 

LA132ZMP 49.06 53.07 10.20 7.68 1" + 3/4" 1506 

LA160MP 51.18 55.85 12.34 8.94 1" + 3/4" 1559 

LA160ZLP 53.07 57.74 12.34 8.94 1" + 3/4" 1559 

LG180ZMB 55.53 60.33 13.70 12.70 1 1/4" + 3/4" 1837 

LG180ZLB 55.53 60.33 13.70 12.70 1 1/4" + 3/4" 1837 

LG200LB 55.73 60.69 15.16 11.85 1 1/4" + 3/4" 1947 

LG225S 58.52 67.93 17.40 12.80 2 x 1 1/2" 2104 

LG225ZM 60.89 70.30 17.40 12.80 2 x 1 1/2" 2207 

LG250ZM 62.85 72.26 17.40 12.80 2 x 1 1/2" 2531 

K4-LGI280ZM 77.54 86.48 21.85 17.01 2 x 2 1/2" 3016 


4 - 202 

B A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



400 300 350 5 M24x32 114,3 160 500 460 80 430 1“-8UNC 125,96 25,4 250 220 259 

Gearcase 

E FA F FC FB G JE B D PB2 DB JB JA JC JD PB1 QC QB WG P2 H 

380 140 420 320 180 50 340 500 450 225 68,5 130 130 130 130 450 280 536 241 255,5 39 

Motor 

B A 

KAZ188 


LA132SP 1200.0 1302.0 259.0 195.0 1" + 3/4" 674 

LA132ZMP 1246.0 1348.0 259.0 195.0 1" + 3/4" 683 

LA160MP 1300.0 1418.5 313.5 227.0 1" + 3/4" 707 

LA160ZLP 1348.0 1466.5 313.5 227.0 1" + 3/4" 707 

LG180ZMB 1410.5 1532.5 348.0 322.5 1 1/4" + 3/4" 833 

LG180ZLB 1410.5 1532.5 348.0 322.5 1 1/4" + 3/4" 833 

LG200LB 1415.5 1541.5 385.0 301.0 1 1/4" + 3/4" 883 

LG225S 1486.5 1725.5 442.0 325.0 2 x 1 1/2" 954 

LG225ZM 1546.5 1785.5 442.0 325.0 2 x 1 1/2" 1001 

LG250ZM 1596.5 1835.5 442.0 325.0 2 x 1 1/2" 1148 

K4-LGI280ZM 1969.5 2196.5 555.0 432.0 2 x 2 1/2" 1368 


4 - 203


Available Output Solid Shafts 

INCH 

Size U 

UY 

V 

VO 

KEY 

TAP M 

[inch] 

[inch] 

[inch] 

[inch] 

[inch] 

[inch] 

B./B.F28 3/4 0.83 1.57 0.01 3/16 x 3/16 x 1 1/4 1/4 - 20 x 0.63 

B./B.F38 

K./K.F38 * 

1 1.11 1.97 0.252 1/4 x 1/4 x 1 1/2 3/8 - 16 x 0.87 

K./K.F48 * 1 1/4 1.36 2.36 0.133 1/4 x 1/4 x 1 7/8 3/8 - 16 x 0.87 

K.38 1 3/8 1.51 2.76 0.027 5/16 x 5/16 x 2 3/8 3/8 - 16 x 0.87 

K.48 

K./K.F68 * 

1 5/8 1.79 3.15 0.065 3/8 x 3/8 x 2 3/4 5/8 - 11 x 1.42 

K.68 

K./K.F88 * 

2 2.22 3.94 0.004 1/2 x 1/2 x 3 1/2 3/4 - 10 x 1.65 

K./K.F108 * 2 3/8 2.65 4.72 0.002 5/8 x 5/8 x 4 1/4 3/4 - 10 x 1.65 

K.88 2 3/4 3.03 5.51 0.671 5/8 x 5/8 x 4 1/4 3/4 - 10 x 1.65 

K./K.F128 * 2 7/8 3.20 5.51 0.046 3/4 x 3/4 x 4 7/8 3/4 - 10 x 1.65 

K.108 3 3/16 3.52 6.69 0.834 3/4 x 3/4 x 4 7/8 3/4 - 10 x 1.65 

K.128 

K./K.F148 * 

3 5/8 4.01 6.69 0.602 7/8 x 7/8 x 5 1/2 1 - 8 x 1.97 

K.148 4 4.44 8.27 0.677 1 x 1 x 7 1 - 8 x 1.97 

K./K.F168 * 4 3/8 4.82 8.27 0.677 1 x 1 x 7 1 - 8 x 1.97 

K.168 

K./K.F188 * 

4 3/4 5.29 8.27 0.677 1 1/4 x 1 1/4 x 7 1 - 8 x 1.97 

METRIC 

Size U 

UY 

V 

VO 

KEY 

TAP M 

[mm] 

[mm] 

[mm] 

[mm] 

[mm] 

[mm] 

B./B.F28 20 22.5 40 4 6 x 6 x 32 M6 x 16 

B./B.F38 30 33 60 3.5 8 x 7 x 50 M10 x 22 

K./K.F38 * 25 28 50 5 8 x 7 x 40 M10 x 22 

K./K.F48 * 30 33 60 3.5 8 x 7 x 50 M10 x 22 

K./K.F68 * 40 43 80 5 12 x 8 x 70 M16 x 36 

K./K.F88 * 50 53.5 100 10 14 x 9 x 80 M16 x 36 

K./K.F108 * 60 64 120 5 18 x 11 x 110 M20 x 42 

K./K.F128 * 70 74.5 140 7.5 20 x 12 x 125 M20 x 42 

K./K.F148 * 90 95 170 15 25 x 14 x 140 M24 x 50 

K./K.F168 * 110 116 210 15 28 x 16 x 180 M24 x 50 

K./K.F188 * 120 127 210 15 32 x 18 x 180 M24 x 50 

* Second Shaft Extension possible (not for KF) Tolerances see page 1- 4. Tap specification see page 1 - 7. 

4 - 204 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Available Output Hollow Shafts Inch 

INCH 

Size VC 

[inch] 

BA. 28 

4.72 

EH 

[inch] 

EB 

[inch] 

U 

[inch] 

UF 

[inch] 

UY 

[inch] 


Y 

[inch] 

VG 

[inch] 

VH 

[inch] 

M BOLT 

[inch] 

4.82 1.58 3/4 1.58 0.85 3/16 4.18 1.047 1/2 - 13 UNC 

KA. 38 4.84 1.73 

1 

1 1/4 

1.77 

1.12 

1.38 

1/4 

4.13 

4.02 

1.547 3/8 - 16 UNC 

BA. 38 5.51 5.61 2.13 1 1/4 1.97 1.38 1/4 4.65 1.465 3/8 - 16 UNC 

KA. 48 5.91 6.02 2.28 

1 3/8 

1 1/2 

2.17 

1.53 

1.68 

5/16 

3/8 

5.04 

1.37 

1.93 

3/8 - 16 UNC 

KA. 68 7.09 7.20 2.72 

1 1/2 

1 3/4 

2.56 

1.68 

1.87 * 

3/8 5.91 1.93 5/8 - 11 UNC 

KA. 88 8.27 8.39 3.07 

2 

2 3/8 

3.15 

2.23 

2.47 * 

1/2 

5/8 

7.09 1.62 3/4 - 10 UNC 

KA. 108 9.45 9.61 3.66 

2 3/8 

2 7/16 3.74 

2.66 

2.72 5/8 8.19 

2.37 

3/4 - 10 UNC 

2 3/4 2.92 * 2.35 

2 3/4 

3.04 5/8 

2.35 

KA. 128 11.81 11.97 4.84 2 15/16 

2 1/4 

4.33 3.28 

3.41 * 

3/4 

10.35 2.27 

2.15 

3/4 - 10 UNC 

KA. 148 13.78 13.94 5.83 

3 7/16 

3 5/8 

4.72 

3.70 * 

3.84 * 

7/8 12.2 2.10 1 - 8 UNC 

KA. 168 16.14 16.30 6.89 

4 

4 1/2 

5.91 

4.45 

4.83 * 

1 14.41 

2.09 

1.94 

1 - 8 UNC 

KA. 188 19.69 20.04 8.66 4 1/2 6.30 4.95 1 18.11 3.134 1 - 8 UNC 

Tolerances see page 1- 4. * rectangular key have to be used 

4 - 205


Available Output Hollow Shafts Metric 

METRIC 

Size VC 

[mm] 

BA. 28 

4 - 206 

120 

EH 

[mm] 

EB 

[mm] 

U 

[mm] 

UF 

[mm] 

UY 

[mm] 

122 40 25 40 28.3 

Y 

[mm] 

8 

VG 

[mm] 

VH 

[mm] 

M BOLT 

[mm] 

105 27.6 M10 x 35 

KA. 38 123 44 30 45 33.3 102 31 M10 x 40 

BA. 38 140 142 54 30 50 33.3 8 118 31 M10 x 25 

KA. 48 150 153 58 

40 

35 

55 

43.3 

38.3 

12 

10 

128 

48 

40 

M16 x 60 

M12 x 50 

KA. 68 180 183 69 

45 

40 

65 

48.8 

43.3 

14 

12 

150 

47 

48 

M16 x 60 

KA. 88 210 213 78 

60 

50 

80 

64.4 

53.8 

18 

14 

180 

54 

44.5 

M20 x 70 

M16 x 60 

KA. 108 240 244 93 

70 

60 

95 

74.9 

64.4 

20 

18 

208 

63.5 

64 

M20 x 80 

KA. 128 300 304 123 

80 

70 

110 

85.4 

74.9 

22 

20 

263 63.5 

M20 x 85 

M20 x 80 

KA. 148 350 354 148 

90 

80 

120 

95.4 

85.4 

25 

22 

310 

72 

63.5 

M24 x 95 

M20 x 85 

KA. 168 410 414 175 

110 

100 

150 

116.4 

106.4 

28 366 

73 

72 

M24 x 100 

M24 x 95 

KA. 188 500 510 220 120 160 127.4 32 460 71 M24 x 100 

Tolerances see page 1- 4. 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Helical Bevel Gear Motors shaft mounted with shrink disk 

Model U UA 

[inch] 

[mm] 

BA.S 28 

BA.S 38 

KA.S 38 

KA.S 48 

KA.S 68 

KA.S 88 

KA.S 108 

KA.S 128 

KA.S 148 

KA.S 168 

KA.S 188 

UG UH 

[inch] 

[mm] 

VL 

[inch] 

[mm] 

TA 

[inch] 

[mm] 

TB 

[inch] 

[mm] 

TC 

[inch] 

[mm] 


TD 

[inch] 

[mm] 

PA 

[inch] 

[mm] 

EA 

[inch] 

[mm] 

Q1 

[inch] 

[mm] 

1) 

Motor size 

- - 5.59 0.79 0.98 0.91 0.98 2.28 2.36 3.58 

20 20 142 20 25 23 25 58 60 91 100 * 

- - 6.54 0.79 0.98 1.06 1.26 3.03 2.76 4.09 

30 30 166 20 25 27 32 77 70 104 100 

- - 5.75 0.79 0.98 0.87 1.06 3.03 2.36 3.70 

30 30 146 20 25 22 27 77 60 94 100 

- - 6.97 0.79 0.98 0.98 1.18 3.66 2.95 4.29 

40 40 177 20 25 25 30 93 75 109 112 

- - 8.23 0.79 0.98 1.06 1.26 4.41 3.54 4.96 

50 50 209 20 25 27 32 112 90 126 132 

- - 9.49 1.18 1.38 1.14 1.34 5.20 4.13 5.67 

60 60 241 30 35 29 34 132 105 144 160 

- - 11.02 1.57 1.77 1.18 1.38 5.67 4.72 6.61 

70 70 280 40 45 30 35 144 120 168 200 

- - 13.58 1.97 2.17 1.57 1.77 7.09 5.91 8.15 

80 80 345 50 55 40 45 180 150 207 225 

- - 15.91 2.36 2.56 1.93 2.13 8.27 6.89 9.57 

95 95 404 60 65 49 54 210 175 243 250 

- - 19.02 2.76 2.95 2.13 2.32 9.33 8.07 11.46 

105 105 483 70 75 54 59 237 205 291 280 

- - 22.83 3.15 3.35 2.44 2.64 10.35 9.84 13.47 

125 125 580 80 85 62 67 263 250 342 315 

1) Largest mountable motor size Tolerances see page 1-4. 

*) B.A.S 28-90 not possible Minimum strength of machines drive shaft 50000 psi (360 N/mm 2 ) 

4 - 207


Tandem-Bevel Helical Gear Motors 

4 - 208 

K 710 


LA71 5.47 14.29 16.46 7.97 

LA80 6.16 19.78 22.28 11.63 

K.38-Z28 

LA71Z 

LA90S 

5.47 

6.85 

15.04 

18.11 

17.20 

20.91 

8.72 

11.79 

K108-Z38 

LA90S 

LA100L 

6.85 

7.68 

21.00 

25.57 

23.80 

28.76 

12.85 

17.42 

LA90ZL 6.85 21.65 24.45 15.33 LA112M 8.62 25.08 28.27 16.93 

LA100L 7.68 24.09 27.28 17.78 

LA71 5.47 18.92 21.08 10.77 

LA71 5.47 14.29 16.46 7.97 LA71Z 5.47 19.67 21.83 11.52 

K.38-D28 

LA71Z 

LA90S 

5.47 

6.85 

15.04 

18.11 

17.20 

20.91 

8.72 

11.79 

K108-D38 LA80 

LA90S 

6.16 

6.85 

20.37 

21.59 

22.87 

24.39 

12.22 

13.44 

LA90ZL 6.85 21.65 24.45 15.33 LA90ZL 6.85 23.37 26.16 15.22 

LA71 5.47 14.29 16.46 7.97 

LA71 5.47 21.44 23.60 9.96 

LA71Z 5.47 15.04 17.20 8.72 LA71Z 5.47 22.19 24.35 10.71 

K.48-Z28 LA90S 6.85 18.11 20.91 11.79 LA80 6.16 22.89 25.39 11.42 

LA90ZL 6.85 21.65 24.45 15.33 LA90S 6.85 24.11 26.91 12.64 

LA100L 7.68 24.09 27.28 17.78 K108-Z48 LA90ZL 6.85 25.89 28.68 14.41 

LA71 5.47 14.29 16.46 7.97 LA100L 7.68 28.68 31.87 17.20 

K.48-D28 

LA71Z 

LA90S 

5.47 

6.85 

15.04 

18.11 

17.20 

20.91 

8.72 

11.79 

LA112M 

LA132S 

8.62 

10.20 

28.17 

29.51 

31.36 

33.52 

16.69 

18.03 

LA90ZL 6.85 21.65 24.45 15.33 LA132ZM 10.20 31.32 35.33 19.84 

LA71 5.47 14.07 16.24 7.97 

LA71 5.47 18.05 20.22 10.18 

LA71Z 5.47 14.82 16.99 8.72 LA71Z 5.47 18.80 20.96 10.93 

K.68-Z28 LA90S 6.85 17.89 20.69 11.79 LA80 6.16 19.51 22.01 11.63 

LA90ZL 6.85 21.44 24.23 15.33 K128-Z38 LA90S 6.85 20.73 23.52 12.85 

LA100L 7.68 23.88 27.07 17.78 LA90ZL 6.85 22.50 25.30 14.63 

LA71 5.47 14.07 16.24 7.97 LA100L 7.68 25.30 28.48 17.42 

K.68-D28 

LA71Z 

LA90S 

5.47 

6.85 

14.82 

17.89 

16.99 

20.69 

8.72 

11.79 

LA112M 

LA71 

8.62 

5.47 

24.80 

18.64 

27.99 

20.81 

16.93 

10.77 

LA90ZL 6.85 21.44 24.23 15.33 LA71Z 5.47 19.39 21.56 11.52 

LA71 5.47 13.84 16.00 7.97 K128-D38 LA80 6.16 20.10 22.60 12.22 

LA71Z 5.47 14.59 16.75 8.72 LA90S 6.85 21.32 24.11 13.44 

K.88-Z28 LA90S 6.85 17.66 20.45 11.79 LA90ZL 6.85 23.09 25.89 15.22 

LA90ZL 6.85 21.20 24.00 15.33 

LA71 5.47 20.94 23.11 9.96 

LA100L 7.68 23.64 26.83 17.78 LA71Z 5.47 21.69 23.86 10.71 

LA71 5.47 13.84 16.00 7.97 LA80 6.16 22.40 24.90 11.42 

K.88-D28 

LA71Z 

LA90S 

5.47 

6.85 

14.59 

17.66 

16.75 

20.45 

8.72 

11.79 

K128-Z48 

LA90S 

LA90ZL 

6.85 

6.85 

23.62 

25.39 

26.42 

28.19 

12.64 

14.41 

LA90ZL 6.85 21.20 24.00 15.33 LA100L 7.68 28.19 31.38 17.20 

K.108-Z388 

LA71 

LA71Z 

5.47 

5.47 

18.33 

19.07 

20.49 

21.24 

10.18 

10.93 

LA112M 

LA132S 

8.62 

10.20 

27.68 

29.02 

30.87 

33.03 

16.69 

18.03 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




K128-Z48 LA132ZM 

LA71 

10.20 

5.47 

30.83 

17.87 

34.84 

20.04 

19.84 

10.18 

K168-D48 

LA90ZL 

LA100L 

6.85 

7.68 

25.33 

28.13 

28.13 

31.32 

15.08 

17.87 

LA71Z 5.47 18.62 20.79 10.93 

LA71 5.47 23.60 25.77 9.72 

LA80 6.16 19.33 21.83 11.63 LA71Z 5.47 24.35 26.52 10.47 

K148-Z38 LA90S 6.85 20.55 23.35 12.85 LA80 6.16 25.06 27.56 11.18 

LA90ZL 6.85 22.32 25.12 14.63 LA90S 6.85 26.28 29.07 12.40 

LA100L 7.68 25.12 28.31 17.42 LA90ZL 6.85 28.05 30.85 14.17 

LA112M 8.62 24.63 27.81 16.93 K168-Z68 LA100L 7.68 30.85 34.04 16.97 

LA71 5.47 18.46 20.63 10.77 LA112M 8.62 30.26 32.34 16.38 

LA71Z 5.47 19.21 21.38 11.52 LA132S 10.20 31.52 35.53 17.64 

K148-D38 LA80 6.16 19.92 22.42 12.22 LA132ZM 10.20 33.33 37.34 19.45 

LA90S 6.85 21.14 23.94 13.44 LA160M 12.34 35.55 40.22 21.67 

LA90ZL 6.85 22.91 25.71 15.22 LA160ZL 12.34 37.44 42.11 23.56 

LA71 5.47 23.25 25.41 9.72 

LA71 5.47 22.38 24.55 9.72 

LA71Z 5.47 24.00 26.16 10.47 LA71Z 5.47 23.13 25.30 10.47 

LA80 6.16 24.70 27.20 11.18 LA80 6.16 23.84 26.34 11.18 

LA90S 6.85 25.93 28.72 12.40 LA90S 6.85 25.06 27.85 12.40 

LA90ZL 6.85 27.70 30.49 14.17 LA90ZL 6.85 26.83 29.63 14.17 

K148-Z68 LA100L 7.68 30.49 33.68 16.97 K188-Z68 LA100L 7.68 29.63 32.81 16.97 

LA112M 8.62 29.90 33.09 16.38 LA112M 8.62 29.04 32.22 16.38 

LA132S 10.20 31.16 35.18 17.64 LA132S 10.20 30.30 34.31 17.64 

LA132ZM 10.20 32.97 36.99 19.45 LA132ZM 10.20 32.11 36.12 19.45 

LA160M 12.34 35.20 39.86 21.67 LA160M 12.34 34.33 39.00 21.67 

LA160ZL 12.34 37.09 41.75 23.56 LA160ZL 12.34 36.22 40.89 23.56 

LA71 5.47 20.22 22.38 9.96 

LA71 5.47 23.11 25.28 10.45 

LA71Z 5.47 20.96 23.13 10.71 LA71Z 5.47 23.86 26.02 11.20 

LA80 

LA90S 

6.16 

6.85 

21.67 

22.89 

24.17 

25.69 

11.42 

12.64 

K188-D68 

LA80 

LA90S 

6.16 

6.85 

24.57 

25.79 

27.07 

28.58 

11.91 

13.13 

K168-Z48 LA90ZL 6.85 24.67 27.46 14.41 LA90ZL 6.85 27.56 30.35 14.90 

LA100L 7.68 27.46 30.65 17.20 LA100L 7.68 30.35 33.54 17.70 

LA112M 8.62 26.95 30.14 16.69 

LA90S 6.85 30.57 33.37 11.81 

LA132S 10.20 28.29 32.30 18.03 LA90ZL 6.85 32.34 35.14 13.58 

LA132ZM 10.20 30.10 34.11 19.84 LA100L 7.68 35.04 38.23 16.28 

K168-D48 

LA71 

LA71Z 

LA80 

5.47 

5.47 

6.16 

20.89 

21.63 

22.34 

23.05 

23.80 

24.84 

10.63 

11.38 

12.09 

K188-Z88 

LA112M 

LA132S 

LA132ZM 

8.62 

10.20 

10.20 

34.41 

35.67 

37.48 

37.60 

39.69 

41.50 

15.65 

16.91 

18.72 

LA90S 6.85 23.56 26.36 13.31 LA160M 12.34 39.78 44.45 21.02 

LA160ZL 12.34 41.67 46.34 22.91 

K 710 

[inch] 

4 - 209


4 - 210 

K 710 

[mm] 


LA71 139.0 363.0 418.0 202.5 

LA80 156.5 502.5 566.0 295.5 

K38-Z28 

LA71Z 

LA90S 

139.0 

174.0 

382.0 

460.0 

437.0 

531.0 

221.5 

299.5 

K108-Z38 

LA90S 

LA100L 

174.0 

195.0 

533.5 

649.5 

604.5 

730.5 

326.5 

442.5 

LA90ZL 174.0 550.0 621.0 389.5 LA112M 219.0 637.0 718.0 430.0 

LA100L 195.0 612.0 693.0 451.5 

LA71 139.0 480.5 535.5 273.5 

LA71 139.0 363.0 418.0 202.5 LA71Z 139.0 499.5 554.5 292.5 

K38-D28 

LA71Z 

LA90S 

139.0 

174.0 

382.0 

460.0 

437.0 

531.0 

221.5 

299.5 

K108-D38 LA80 

LA90S 

156.5 

174.0 

517.5 

548.5 

581.0 

619.5 

310.5 

341.5 

LA90ZL 174.0 550.0 621.0 389.5 LA90ZL 174.0 593.5 664.5 386.5 

LA71 139.0 363.0 418.0 202.5 

LA71 139.0 544.5 599.5 253.0 

LA71Z 139.0 382.0 437.0 221.5 LA71Z 139.0 563.5 618.5 272.0 

K48-Z28 LA90S 174.0 460.0 531.0 299.5 LA80 156.5 581.5 645.0 290.0 

LA90ZL 174.0 550.0 621.0 389.5 LA90S 174.0 612.5 683.5 321.0 

LA100L 195.0 612.0 693.0 451.5 K108-Z48 LA90ZL 174.0 657.5 728.5 366.0 

LA71 139.0 363.0 418.0 202.5 LA100L 195.0 728.5 809.5 437.0 

K48-D28 

LA71Z 

LA90S 

139.0 

174.0 

382.0 

460.0 

437.0 

531.0 

221.5 

299.5 

LA112M 

LA132S 

219.0 

259.0 

715.5 

749.5 

796.5 

851.5 

424.0 

458.0 

LA90ZL 174.0 550.0 621.0 389.5 LA132ZM 259.0 795.5 897.5 504.0 

LA71 139.0 357.5 412.5 202.5 

LA71 139.0 458.5 513.5 258.5 

LA71Z 139.0 376.5 431.5 221.5 LA71Z 139.0 477.5 532.5 277.5 

K68-Z28 LA90S 174.0 454.5 525.5 299.5 LA80 156.5 495.5 559.0 295.5 

LA90ZL 174.0 544.5 615.5 389.5 K128-Z38 LA90S 174.0 526.5 597.5 326.5 

LA100L 195.0 606.5 687.5 451.5 LA90ZL 174.0 571.5 642.5 371.5 

LA71 139.0 357.5 412.5 202.5 LA100L 195.0 642.5 723.5 442.5 

K68-D28 

LA71Z 

LA90S 

139.0 

174.0 

376.5 

454.5 

431.5 

525.5 

221.5 

299.5 

LA112M 

LA71 

219.0 

139.0 

630.0 

473.5 

711.0 

528.5 

430.0 

273.5 

LA90ZL 174.0 544.5 615.5 389.5 LA71Z 139.0 492.5 547.5 292.5 

LA71 139.0 351.5 406.5 202.5 K128-D38 LA80 156.5 510.5 574.0 310.5 

LA71Z 139.0 370.5 425.5 221.5 LA90S 174.0 541.5 612.5 341.5 

K88-Z28 LA90S 174.0 448.5 519.5 299.5 LA90ZL 174.0 586.5 657.5 386.5 

LA90ZL 174.0 538.5 609.5 389.5 

LA71 139.0 532.0 587.0 253.0 

LA100L 195.0 600.5 681.5 451.5 LA71Z 139.0 551.0 606.0 272.0 

LA71 139.0 351.5 406.5 202.5 LA80 156.5 569.0 632.5 290.0 

K88-D28 

LA71Z 

LA90S 

139.0 

174.0 

370.5 

448.5 

425.5 

519.5 

221.5 

299.5 

K128-Z48 

LA90S 

LA90ZL 

174.0 

174.0 

600.0 

645.0 

671.0 

716.0 

321.0 

366.0 

LA90ZL 174.0 538.5 609.5 389.5 LA100L 195.0 716.0 797.0 437.0 

K108-Z38 

LA71 

LA71Z 

139.0 

139.0 

465.5 

484.5 

520.5 

539.5 

258.5 

277.5 

LA112M 

LA132S 

219.0 

259.0 

703.0 

737.0 

784.0 

839.0 

424.0 

458.0 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




K128-Z48 LA132ZM 

LA71 

259.0 

139.0 

783.0 

454.0 

885.0 

509.0 

504.0 

258.5 

K168-D48 

LA90ZL 

LA100L 

174.0 

195.0 

643.5 

714.5 

714.5 

795.5 

383.0 

454.0 

LA71Z 139.0 473.0 528.0 277.5 

LA71 139.0 599.5 654.5 247.0 

LA80 156.5 491.0 554.5 295.5 LA71Z 139.0 618.5 673.5 266.0 

K148-Z38 LA90S 174.0 522.0 593.0 326.5 LA80 156.5 636.5 700.0 284.0 

LA90ZL 174.0 567.0 638.0 371.5 LA90S 174.0 667.5 738.5 315.0 

LA100L 195.0 638.0 719.0 442.5 LA90ZL 174.0 712.5 783.5 360.0 

LA112M 219.0 625.5 706.5 430.0 K168-Z68 LA100L 195.0 783.5 864.5 431.0 

LA71 139.0 469.0 524.0 273.5 LA112M 219.0 768.5 821.5 416.0 

LA71Z 139.0 488.0 543.0 292.5 LA132S 259.0 800.5 902.5 448.0 

K148-D38 LA80 156.5 506.0 569.5 310.5 LA132ZM 259.0 846.5 948.5 494.0 

LA90S 174.0 537.0 608.0 341.5 LA160M 313.5 903.0 1021.5 550.5 

LA90ZL 174.0 582.0 653.0 386.5 LA160ZL 313.5 951.0 1069.5 598.5 

LA71 139.0 590.5 645.5 247.0 

LA71 139.0 568.5 623.5 247.0 

LA71Z 139.0 609.5 664.5 266.0 LA71Z 139.0 587.5 642.5 266.0 

LA80 156.5 627.5 691.0 284.0 LA80 156.5 605.5 669.0 284.0 

LA90S 174.0 658.5 729.5 315.0 LA90S 174.0 636.5 707.5 315.0 

LA90ZL 174.0 703.5 774.5 360.0 LA90ZL 174.0 681.5 752.5 360.0 

K148-Z68 LA100L 195.0 774.5 855.5 431.0 K188-Z68 LA100L 195.0 752.5 833.5 431.0 

LA112M 219.0 759.5 840.5 416.0 LA112M 219.0 737.5 818.5 416.0 

LA132S 259.0 791.5 893.5 448.0 LA132S 259.0 769.5 871.5 448.0 

LA132ZM 259.0 837.5 939.5 494.0 LA132ZM 259.0 815.5 917.5 494.0 

LA160M 313.5 894.0 1012.5 550.5 LA160M 313.5 872.0 990.5 550.5 

LA160ZL 313.5 942.0 1060.5 598.5 LA160ZL 313.5 920.0 1038.5 598.5 

LA71 139.0 513.5 568.5 253.0 

LA71 139.0 587.0 642.0 265.5 

LA71Z 139.0 532.5 587.5 272.0 LA71Z 139.0 606.0 661.0 284.5 

LA80 

LA90S 

156.5 

174.0 

550.5 

581.5 

614.0 

652.5 

290.0 

321.0 

K188-D68 

LA80 

LA90S 

156.5 

174.0 

624.0 

655.0 

687.5 

726.0 

302.5 

333.5 

K168-Z48 LA90ZL 174.0 626.5 697.5 366.0 LA90ZL 174.0 700.0 771.0 378.5 

LA100L 195.0 697.5 778.5 437.0 LA100L 195.0 771.0 852.0 449.5 

LA112M 219.0 684.5 765.5 424.0 

LA90S 174.0 776.5 847.5 300.0 

LA132S 259.0 718.5 820.5 458.0 LA90ZL 174.0 821.5 892.5 345.0 

LA132ZM 259.0 764.5 866.5 504.0 LA100L 195.0 890.0 971.0 413.5 

K168-D48 

LA71 

LA71Z 

LA80 

139.0 

139.0 

156.5 

530.5 

549.5 

567.5 

585.5 

604.5 

631.0 

270.0 

289.0 

307.0 

K188-Z88 

LA112M 

LA132S 

LA132ZM 

219.0 

259.0 

259.0 

874.0 

906.0 

952.0 

955.0 

1008.0 

1054.0 

397.5 

429.5 

475.5 

LA90S 174.0 598.5 669.5 338.0 LA160M 313.5 1010.5 1129.0 534.0 

LA160ZL 313.5 1058.5 1177.0 582.0 

K 710 

[mm] 

4 - 211


Bevel Helical Gear Units flange mounted for Mixer/Agitator 

Mixer-Design KAM/KM 







an additional „V“-Ring (1) and detecting the leakage either through a sight glass or electronic sensor (2). 

Optional Re-Greasing System 



on request or in electronic cataloque. 

4 - 212 

2 

1 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Helical Bevel Gear Units Flange mounted for Mixer / Agitator 

B A 

for KM108 - KM168 only output side B is possible. 

BD ≥ 17.72" 

BD ≥ 450 mm 


Inch 

Dimensions in 

mm 

Model BD AK GA AJ BB BF GL XF AM U V V3 VO UY Y TAP M Add.Weight* 

KM88 

11.81 

300 

9.06 

230 

0.79 

20 

10.43 

265 

0.16 

4 

0.53 

13.5 

4.72 

120 

8.52 

216.5 

5.51 

140 70 

5.51 

140 

4.33 

110 

0.59 

15 

2.93 

74.5 20 M20 x 42 

64 

29 

KM108 

13.78 

350 

9.84 

250 

0.79 

20 

11.81 

300 

0.20 

5 

0.69 

17.5 

5.31 

135 

9.69 

246 

6.69 

170 80 

6.69 

170 

4.92 

125 

0.79 

20 

3.35 

85 22 M20 x 42 

105 

48 

KM128 

17.72 

450 

13.78 

350 

0.98 

25 

15.75 

400 

0.20 

5 

0.69 

17.5 

6.50 

165 

12.05 

306 

6.69 

170 90 

6.69 

170 

5.51 

140 

0.59 

15 

3.74 

95 25 M24 x 50 

182 

82 

KM148 

17.72 

450 

13.78 

350 

0.98 

25 

15.75 

400 

0.20 

5 

0.69 

17.5 

7.28 

185 

13.74 

349 

8.27 

210 100 

8.27 

210 

7.09 

180 

0.59 

15 

4.17 

106 28 M24 x 50 

234 

106 

KM168 

21.65 

550 

17.72 

450 

1.10 

28 

19.69 

500 

0.20 

5 

0.69 

17.5 

8.27 

210 

15.91 

404 

8.27 

210 120 

8.27 

210 

7.09 

180 

0.59 

15 

5.00 

127 32 M24 x 50 

389 

177 


* To get the weight of the complete drive, the additional weight must be added to the weight of the gear unit in flange design KAZ 

Eg:- Weight KAZ88-LA112M (212 lb / 96 kg) + additional weight KM88 (64 lb / 29 kg) = total weight KM88-LA112M (276 lb / 125 kg) 

4 - 213


Helical Bevel Gear Units Shaft mounted with flange for Mixer / Agitator 

for KAM108 - KAM168 only output side B is possible. 

4 - 214 

B A 

BD ≥ 17.72" 

BD ≥ 450 mm 

Dimensions in 

mm 

Model BD AK GA AJ BB BF GL XF EH U UF VC EB VG VH VL UY Y M BOLT Add. 

Weight* 

KAM88 

11.81 

300 

9.06 

230 

0.79 10.43 0.16 

20 265 4 

0.53 

13.5 

4.72 

120 

8.52 12.76 

216.5 324 60 

3.15 12.64 3.07 

80 321 78 

11.46 

291 

2.13 10.83 2.54 

54 275 64.4 18 M20 

39 

18 

13.78 9.84 

KAM108 

350 250 

0.79 

20 

11.81 

300 

0.20 

5 

0.69 

17.5 

5.31 

135 

9.69 14.55 

246 369.5 70 

3.74 14.41 3.66 13.15 2.50 12.20 2.95 

95 366 93 334 63.5 310 74.9 20 M20 

66 

30 

17.72 13.78 0.98 15.75 0.20 

KAM128 

450 350 25 400 5 

0.69 

17.5 

6.50 12.05 18.03 

165 306 458 80 

4.33 17.95 4.84 16.50 2.50 15.55 3.36 

110 456 123 419 63.5 395 85.4 22 M20 

123 

56 

17.72 13.78 0.98 15.75 0.20 

KAM148 

450 350 25 400 5 

0.69 

17.5 

7.28 13.74 20.71 

185 349 526 90 

4.72 20.63 5.83 19.06 2.83 

120 524 148 484 72 

18.11 

460 

3.76 

95.4 25 M24 

148 

67 

21.65 17.72 1.10 19.69 0.20 

KAM168 

550 450 28 500 5 

0.69 

17.5 

8.27 15.91 24.06 

210 404 611 110 

5.91 23.98 6.89 22.24 2.87 21.26 4.58 

150 609 175 565 73 540 116.4 28 M24 

248 

113 


* To get the weight of the complete drive, the additional weight must be added to the weight of the gear unit in flange design KAZ 

Eg:- Weight KAZ88-LA112M (212 lb / 96 kg) + additional weight KAM88 (39 lb / 18 kg) = total weight KAM88-LA112M (251 lb / 114 kg) 

Inch 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Helical Bevel Gear Units with Extruder Flange 


1 2 

5 4 3 

1. Large Spherical Roller Bearing - 294... Series of Spherical Roller Bearings to carry heavy Axial Loads. 

2. Simple, Cost-effective Design - Customer Connecting Hub without any Grinding Process. Standard Shaft-Hub Connection by 

Key acc. DIN 6885/1. 

3. High Accuracy - Customer-side Centering and Radial Bearing Bore machined in One Setting and from One Direction. 

4. Optimized Lubrication - Extruder Flange Lubrication isolated from Gearbox Lubrication. 

5. Standard Connections - Metric thread for support of extruder screw (disassembly of extruder screw to the back end). 

Scope of Application 

Helical Bevel Gear Unit KAE68 KAE88 KAE108 KAE128 KAE148 KAE168 

Maximum Power [hp] 12.5 20 30 60 75 120 

Min / Max Ratio [2-stage] 5.36 / 243.72 5.54 / 302.68 7.68 / 307.24 7.1 / 295.38 4.83 / 306.08 6.61 / 287.95 

Maximum Torque [lb-in] 7300 14600 26600 41600 70800 119500 

Thrust Bearing [.] 29414E 29417E 29420E 29424E 29426E 29432E 

Screw-ø [mm] 

20 X 

25 X 

30 X X 

35 O X 

38 X 

40 X X 

45 O X X 

50 O X X 

60 O X X 

70 O X X 

75 X X 

80 O X 

90 X 

100 O 

X Extruder Screw Extraction towards the front / back end O Extruder Screw Extraction only towards the front end 

4 - 215


Helical Bevel Gear Motors with Extruder Flange 

for KAE108 - KAE168 only output side B is possible 

Flange Dimensions in 

Model BD AK AJ BB TAP BF GL AM XF 

KAE 68 

10.24 

260 

8.66 

220 

+0.0018 / 0 

+0.046 / 0 

9.29 

236 

0.39 

10 M12x17 

5.81 

147.5 

0.59 

15 

9.01 

230 

KAE 88 

12.21 

310 

10.04 

255 

+0.0021 / 0 

+0.052 / 0 

11.02 

280 

0.39 

10 M16x22 

6.73 

171 

0.61 

15.5 

10.53 

267.5 

KAE 108 

14.17 

360 

12.01 

305 

+0.0021 / 0 

+0.052 / 0 

12.99 

330 

0.39 

10 M16x22 

7.40 

188 

0.91 

23 

9.02 

229 

KAE 128 

16.54 

420 

13.58 

345 

+0.0023 / 0 

+0.057 / 0 

14.96 

380 

0.39 

10 M20x27 

8.11 

206 

0.98 

25 

13.66 

347 

KAE 148 

17.72 

450 

14.17 

360 

+0.0023 / 0 

+0.057 / 0 

15.75 

400 

0.39 

10 M24x32 

8.86 

225 

1.06 

27 

15.32 

389 

KAE 168 

20.08 

510 

16.54 

420 

+0.0025 / 0 

+0.063 / 0 

18.11 

460 

0.59 

15 M24x32 

10.32 

262 

1.50 

38 

17.95 

456 

4 - 216 

B A 

BD ≥ 12.21" 

BD ≥ 310 mm 

BD ≥ 6.3" 

BD ≥ 160 mm 

Inch 

mm 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft Dimensions in 

Model U VS UF UH VH UG EH UA VA UJ UD US VD UC VB VG BOLT UY Y 

VC UB 

- 

13.74 4.13 

0.90 0.24 

20 1.89 2.56 1.50 1.18 

0.55 3.47 1.89 +0.001 / 0 0.43 0.43 2.56 0.16 0.79 22.8 6 

KAE 68 

- 

25 

349 105 

12.01 4.09 

1.11 

28.3 

0.32 

8 

- 48 65 38 30 M42x2 14 88 48 +0.025 / 0 11 11 65 4 20 M10x25 1.31 0.32 

30 305 104 

33.3 8 

- 

16.16 5.12 

1.31 0.32 

30 2.28 3.15 1.93 1.54 

0.91 4.33 2.48 +0.0012 / 0 0.67 0.47 3.15 0.18 0.93 33.3 8 

KAE 88 

- 

35 

410.5 130 

14.06 5.08 

1.51 0.39 

38.3 10 

- 58 80 49 39 M56x2 23 110 63 +0.030 / 0 17 12 80 4.5 23.5 M12x35 1.71 0.47 

40 357 129 43.3 12 

- 

18.19 6.30 

1.71 0.47 

40 2.80 3.74 2.36 1.54 

0.98 5.12 3.07 +0.0012 / 0 0.67 0.55 3.74 0.20 1.22 43.3 12 

KAE 108 

- 

45 

462 160 

15.59 6.14 

1.92 0.55 

48.8 14 

- 71 95 60 39 M64x2 25 130 78 +0.030 / 0 17 14 95 5 31 M16x45 2.12 0.55 

50 396 156 53.8 14 

- 

21.81 6.89 

1.92 0.55 

45 3.43 4.33 2.80 1.93 

1.22 5.91 3.47 +0.0014 / 0 0.87 0.67 4.33 0.20 1.65 48.8 14 

KAE 128 

- 

50 

554 175 

18.58 6.85 

2.12 0.55 

53.8 14 

- 87 110 71 49 M80x3 31 150 88 +0.035 / 0 22 17 110 5 42 M16x45 2.54 0.71 

60 472 174 64.4 18 

- 

24.65 7.48 

2.54 0.71 

60 3.74 4.72 3.47 2.05 

1.30 6.30 4.13 +0.0014 / 0 0.87 0.79 4.72 0.24 1.77 64.4 18 

KAE 148 

- 

70 

626 190 

21.14 7.44 

2.95 0.79 

74.9 20 

- 95 120 88 52 M95x3 33 160 105 +0.035 / 0 22 20 120 6 45 M16x55 3.15 0.79 

75 537 189 79.9 20 

- 

28.43 9.06 

2.95 0.79 

70 4.13 5.91 4.09 2.24 

1.65 7.68 4.92 +0.0016 / 0 0.98 0.87 5.91 0.24 1.93 74.9 20 

KAE 168 

- 

80 

722 230 

24.53 9.02 

3.36 0.87 

85.4 22 

- 105 150 104 57 M110x3 42 195 125 +0.040 / 0 25 22 150 6 49 M20x55 3.76 0.98 

90 623 229 95.4 25 

Inch 

mm 

4 - 217


Bevel Helical Gear Units with Backstop in the intermediate shaft 

The bevel helical gear units KF, KAD, KAF, KAZ, KADS, KAFS and KAZS could be supplied with a backstop in the intermediate shaft. 

It is only possible to assemble the backstop at the opposite side of the output shaft in A respectively B. 

Application support 

4 - 218 

Gear Units UA O10 L10 H10 WG 

K.X88 

K.X108 

K.X128 

K.X148 

K.X168 

Gear Units i ges 

[-] 

K.X88 

K.X108 

K.X128 

K.X148 

K.X168 

[inch] [inch] [inch] [inch] [inch] 

[mm] [mm] [mm] [mm] [mm] 

3.11 6.54 2.22 3.86 4.59 

79 166 56,3 98 116,5 

4.33 7.58 2.79 4.41 5.39 

110 192,5 70,8 112 137 

5.20 9.39 3.18 5.55 6.65 

132 238,5 80,8 141 169 

5.71 10.89 2.80 6.81 7.83 

145 276,5 71 173 199 

7.48 12.62 3.54 7.99 9.02 

190 320,5 89,9 203 229 

T 2x 

[Nm] 

T 2x 

[lb in] 

5,54 - 11,21 2036 18014 

11,64 - 302,68 4275 *) 37824 *) 

7,68 - 12,90 3828 33869 

13,74 - 307,24 6852 *) 60624 *) 

7,1 - 12,56 7595 67198 

13,00 - 295,38 13907 *) 123045 *) 

4,83 - 8,79 10450 92458 

9,77 - 306,08 21139 *) 187031 *) 

6,61 - 11,67 16386 144978 

12,41 - 287,95 30750 *) 272067 *) 

i ges =Ratio main gear 

T 2x =Maximum permissible output torque of backstop at service factor SF=1 

L = Oil Quantity 

*) Information for tandem gears 

B 

L 

[litre] 

0,04 

0,06 

0,09 

0,11 

0,44 

A 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 








Oil fitting 


A, B position of solid shaft or assembly shaft of customer 

B 

B B3-00 (IM B3-00) 

BF B5-01 (IM B5-01) 

BA, BAS, BAT H-01 

B B6-00 (IM B6-00) 

BF B5-00 (IM B5-00) 


V 

A 

V 

4 1 2 

1 

B V5-00 (IM V5-00) 

BF V1-00 (IM V1-00) 


V 

B 

A 

A 

3 

2 

1 

2 

1 

4 

3 

B 

B 

B B8-00 (IM B8-00) 

BF B5-03 (IM B5-03) 


4 

1 

2 

B B7-00 (IM B7-00) 

BF B5-02 (IM B5-02) 


3 1 2 1 4 

A 

B V6-00 (IM V6-00) 

BF V3-00 (IM V3-00) 


1 

2 

3 

V 

V 

A 

A 

B 

V 

B 

4 - 219







1 ... 4 

Oil fitting 

4 - 220 

Position of terminal box, see also Electrical Part. 






B 

K B3-00 (IM B3-00) 

KA, KAS, KAT H-01 

A 

K B6-00 (IM B6-00) 


V 

4 1 2 

1 


K V5-00 (IM V5-00) 


B 

A 

V 

A 

V 

3 

2 

1 

3 

B 

2 

1 

4 

B 

4 

1 

2 

K B8-00 (IM B8-00) 


V 

K B7-00 (IM B7-00) 


3 1 2 1 4 

A 

V 

K V6-00 (IM V6-00) 


1 

2 

3 

V 

A 

A 

B 

B 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 








Oil fitting 






KF, KM88-KM168 B5-01 (IM B5-01) 

KAD., KAF., KAZ., KAM88-KAM168 H-01 

B 

A 

KF, KM88-KM168 B5-00 (IM B5-00) 


V 

4 1 2 

1 

KF, KM88-KM168 V1-00 (IM V1-00) 


B 

A 

V 


A 

V 

3 

2 

1 

3 

2 

1 

4 

B 

KF, KM88-KM168 B5-03 (IM B5-03) 


4 

1 

2 

V 

KF, KM88-KM168 B5-02 (IM B5-02) 


B 

3 1 2 1 4 

A 

KF, KM88-KM168 V3-00 (IM V3-00) 


1 

2 

3 

V 

V 

A 

A 

B 

B 

4 - 221


Tandem-Bevel Helical Gear Motors and Tandem-Gear Units 




Note: 




Oil fitting 


‚ 


2 

3 

4 - 222 





V 

* 

* 

2 3 

Main Gear 

Unit 

Note mounting positions 

The mounting positions shown are also possible for foot-flange housings of size 188. 

V 

* 

Main Gear 

Unit 

V 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Lubrication 

‚ 


MOTOX-Bevel Helical Gear Units of sizes 48...188 are furnished with filler, oil level and drain plug. Before starting operations the 

separately supplied breather plug has to replace the filler plug. 

The size 28 have no venting, oil level and oil drain plug. Because of the low thermal load, no lubricant-change is necessary 

B.38/K. 38 gear units have one oil plug, ventilation of this gear units is not necessary. 

Speed reducers are shipped with their lubricant, ready for operation. In order to fill the housings with adequate amount of lubricant, 

working conditions have to be specified in the order. Only blended, age-resistant and non-foaming EP oils (FZG test DIN 51354 

load stage > 12) are used. Do not mix oils of different manufacturers. We recommend the oils listed. This is, of course, no exclusive 

recommendation and equivalent lubricants of other manufacturers can be used. During an oil change, only oils of the same type (for 

example CLP) and with the same viscosity class (for example VG 220) may be mixed. Do not mix differing types of oil (e.g. CLP 

and PGLP) under any circumstances. 

MOTOX Bevel Helical Gear Units B.28 / B.38 are supplied with long term lubrication. The synthetic oil filling is added at the works. The 

unit’s name plate refers oil type (PGLP) and ISO-viskosity class. 

Biologically decomposable, environment-friendly oils based on synthetic or native ester with water hazard class 1 or 2 respectively or 


Maintenance 

of the bevel helical gear units has to be carried out in accordance with the Operating Instructions manual supplied with the units. 


Ambient tem- 

perature °C 

-10 ... + 40 

-20* ... + 50 

0* ... + 60* 

Marking 

according to 

DIN 51502 

CLP 

ISO VG 220 

CLP PG 

ISO VG 220 

CLP PG 

ISO VG 460 

CLP 220S 

- 

- 

Degol 

BG 220 

Degol 

GS 220 

Degol 

GS 450 

Energol 

GR-XP 220 

Enersyn 

SG-XP 220 

Enersyn 

SG-XP 460 


Alpha SP 220 


Tribol 1100/220 

Optiflex A220 


Optiflex A460 



Falcon 

CLP220 

Polydea 

PGLP 220 

Polydea 

PGLP 460 

Spartan 

EP220 

Glycolube 

220 

Glycolube 

460 

Renolin 

CLP 220 

Renolin 

PG 220 

Renolin 

PG 460 

Klüberoil 

GEM 1-220 

Syntheso 

D 220 EP 

Syntheso 

D 460 EP 

Mobilgear 

XMP 220 

* Note: 


- 

- 

Omala 

220 

Tivela S 

220 

Tivela S 

460 

4 - 223





Important: 


Types of gear units 

B 

K, KA, KAS, KAT 


4 - 224 

B3-00 B8-00 B7-00 B6-00 V5-00 V6-00 

H-01 H-02 H-03 H-04 H-05 H-06 

B.28 0.25 / 0.07 0.60 / 0.16 0.90 / 0.24 0.55 / 0.15 0.50 / 0.13 0.50 / 0.13 

B.38 0.70 / 0.18 1.1 / 0.29 1.6 / 0.42 1.00 / 0.26 0.95 / 0.25 0.80 / 0.21 

K.38 0.50 / 0.13 1.1 / 0.29 1.4 / 0.37 0.80 / 0.21 1.00 / 0.26 0.90 / 0.24 

K.48 0.70 / 0.18 1.6 / 0.42 2.0 / 0.53 1.4 / 0.37 1.5 / 0.4 1.8 / 0.48 

K.68 1.6 / 0.42 3.2 / 0.85 3.9 / 1.03 2.7 / 0.71 3.0 / 0.79 3.0 / 0.79 

K. 88 2.6 / 0.69 5.7 / 1.51 7.4 / 1.95 5.0 / 1.32 4.9 / 1.29 5.2 / 1.37 

K.108 5.5 / 1.45 9.5 / 2.51 12.6 / 3.33 8.8 / 2.32 8.7 / 2.3 8.3 / 2.19 

K.128 8.3 / 2.19 19.6 / 5.18 24.4 / 6.45 15.8 / 4.17 16.9 / 4.46 16.1 / 4.25 

K.148 14.8 / 3.91 30.2 / 7.98 39.5 / 10.43 22.0 / 5.81 25.8 / 6.82 27.0 / 7.13 

K.168 21.6 / 5.71 45.6 / 12.05 60.5 / 15.98 34.2 / 9.03 40.2 / 10.62 38.5 / 10.17 

K.188 33.8 / 8.93 82.5 / 21.79 104.2 / 27.53 63.4 / 16.75 70.7 / 18.68 69.4 / 18.33 

Types of gear units 

BF, BAD, BAF, BAZ, BADS, BAFS, BAZS, BADT, BAFT, BAZT 

KF, KM, KAD, KAF, KAM, KAZ, KADS, KAFS, KAZS, KADT, KAFT, KAZT 


B5-01 B5-03 B5-02 B5-00 V1-00 V3-00 

H-01 H-02 H-03 H-04 H-05 H-06 

B.28 0.25 / 0.07 0.6 / 0.16 0.9 / 0.24 0.55 / 0.15 0.5 / 0.13 0.5 / 0.13 

B.38 0.7 / 0.18 1.1 / 0.29 1.6 / 0.42 1.0 / 0.26 0.95 / 0.25 0.8 / 0.21 

K.38 0.50 / 0.13 1.1 / 0.29 1.5 / 0.4 0.80 / 0.21 1.00 / 0.26 0.90 / 0.24 

K.48 0.70 / 0.18 1.7 / 0.45 2.0 / 0.53 1.4 / 0.37 1.6 / 0.42 1.8 / 0.48 

K.68 1.6 / 0.42 3.2 / 0.85 3.9 / 1.03 2.6 / 0.69 2.8 / 0.74 3.0 / 0.79 

K. 88 2.6 / 0.69 5.8 / 1.53 7.7 / 2.03 5.0 / 1.32 5.1 / 1.35 5.0 / 1.32 

K.108 6.2 / 1.64 9.9 / 2.62 13.7 / 3.62 8.9 / 2.35 10.0 / 2.64 8.9 / 2.35 

K.128 8.7 / 2.3 19.6 / 5.18 25.0 / 6.6 14.8 / 3.91 17.5 / 4.62 16.6 / 4.39 

K.148 14.8 / 3.91 30.1 / 7.95 41.0 / 10.83 25.0 / 6.6 26.0 / 6.87 28.1 / 7.42 

K.168 21.7 / 5.73 46.3 / 12.23 62.6 / 16.54 34.8 / 9.19 41.1 / 10.86 39.4 / 10.41 

K.188 33.8 / 8.93 82.5 / 21.79 104.2 / 27.53 63.4 / 16.75 70.7 / 18.68 69.4 / 18.33 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Parallel Shaft Gear Motors and Gear Units 

5 - 1


5 - 2 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 









Torque table for type of input unit K., A, P 5 - 50 



Pinholes 5 - 74 

Torque arm 5 - 75 




tandem Parallel Shaft Gear Motors 5 - 170 

Parallel Shaft Gear Units for Mixer / Agitator 5 - 176 

Parallel Shaft Gear Units for Extruder Drives 5 - 179 

Mounting Positions 5 - 182 


5 - 3


Parallel Shaft Gear Units 


MOTOX parallel shaft gear units are part of the MOTOX modular system which essentially comprises helical, helical bevel, parallel 

shaft, helical worm gear units or mechanical variable speed drives. With three or single phase AC motors with or without brake, all 

imaginable drive combinations up to electronic variable speed drives are possible. 

MOTOX parallel shaft gear units are designed for continuous operation. 



All gears are hobbed, case hardened and profile ground or honed. Additionally, gear teeth are profile corrected and crowned for 

optimum performance. 

Helical gearing provides for optimum quiet operation. 


Helical gears have a hardness of 58-62 R c . 

The output and input shaft of the two or three stage gear units are parallel. 




manufactured with a solid shaft or with a hollow shaft (fitted key or shrink disc). 

Integrally mounted C-Face adapters, either in the clamp collar style (K5TC) or the elastic coupling style (KTC), are available for NEMA 

motors. 




standard features, ambient temperature of 20°C (68°F), and standard lubricant. 

The actual output speeds and torques may vary slightly from the figures in this catalogue due to motor variations, supply voltage, or 


Efficiency 

The efficiency of helical gearing is determined by gearing and bearing friction and splash losses, and is approximately 96% for 2 stages 

units and 94% for 3 stages units. 

5 - 4 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Standards 

The important dimensions correspond to the DIN standards, namely : 













is placed. 






5 - 5



Gear Units Example: F Z F 108 B - Z 38 - K5TC (56) 

Type 

Stages 

Design 

Size 

Revision index 


Size 

Input unit 


Gearbox type - F Parallel Shaft Gearbox 

Transmission stage 

Z 2-stages 

D 3-stages 

Type- Shaft 



Mounting 

(-) Foot-mounted design 



D Torque arm 

M Mixer/Agitator 

E Extruder 

Connections 

(-) Featherl key 

S Shrink disk 

T Hollow shaft with splined shaft 

Type of intermediate gearbox (-) Helical Gearbox 

Transmission Stage 

Z 2-stages 

D 3-stages 

Input unit 

K2 Coupling lantern with flexible coupling for connecting an 

IEC motor 

K2TC Coupling lantern with flexible coupling for connecting a 

NEMA motor 1) 

K4 Short coupling lantern with clamp connection for 

connecting an IEC motor 


connecting a NEMA motor 1) 

KQ Lantern for servomotor with feather key and zerobacklash 

flexible coupling for connecting a servomotor 

KQS Lantern for servomotor without feather key and zerobacklash 


A Input unit with free input shaft 

A5 Input unit with free input shaft (NEMA design) 1) 

P Input unit with piggy back (IEC motor) 

P Input unit with piggy back (NEMA motor) 

PS Input unit with piggy back and protection cover 

5 - 6 

Motors 

Type 

Size 




Motor type 

LA, LG 

Three-phase AC motor, built-in 


LAI, LGI 



H High efficiency 



W Canopy 



IR Resolver 


D Handwheel 

Mounted unit 

L, KFB 

Spring-operated single-disk brake, DC-excited 







M Micoswitch 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 














T 2 

d 0 

F exist 

= 


T2 ⋅ 2 

------------- 

d 0 




Fxperm 5 - 7


Permissible overhung loads for parallel shaft gear units at Service Factor 1.0 



5 - 8 

F xperm2 

F xperm1 

øU 


x V x V/2 0 







- value 




Note: 

The listed radial forces refer to worst case setup (FF). All setups can be calculated with the MOTOX Electronic Configurator (CD). 

For high or rotating radial load, mixer and agitator drives have to be used. 

F 

F xperm 

0 

y 

= FRperm ⋅ ------------ Ibf][ 

z + x 

a ⋅ 1000 

= -------------------- Ibf][ 

x 

> = 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Typ(e) y 

[in.] 

z 

[in.] 

a 

[lb in] 

U 

[in.] 

V 

[in.] 

F.F28 5.06 4.07 1.02 1 1.97 

F.F38B 5.75 4.76 1.16 1 1.97 

F.F48B 6.93 5.75 2.16 1 1/4 2.36 

F.F68B 8.39 6.81 3.16 1 5/8 3.15 

F.F88B 10.31 8.35 6.57 2 3.94 

F.F108B 11.73 9.37 9.73 2 3/8 4.72 

F.F128B 14.63 11.87 15.81 2 7/8 5.51 

F.F148B 17.09 13.74 19.84 3 5/8 6.69 

F.F168B 20.37 16.24 42.65 4 3/8 8.27 

F.F188B 23.54 19.41 105.41 4 3/4 8.27 


Typ(e) y 

[in.] 

z 

[in.] 

a 

[lb in] 

U 

[in.] 

V 

[in.] 

F.F68B 8.39 6.81 4.83 1 5/8 3.15 

F.F88B 10.31 8.35 10.38 2 3.94 

F.F108B 11.73 9.37 15.25 2 3/8 4.72 

F.F128B 14.63 11.87 22.26 2 7/8 5.51 

F.F148B 17.09 13.74 50.79 3 5/8 6.69 

F.F168B 20.37 16.24 84.75 4 3/8 8.27 

F.F188B 23.54 19.41 105.41 4 3/4 8.27 




∗ 

≤ 16 

[rpm] 



≤ 25 

[rpm] 

≤ 40 

[rpm] 

≤ 63 

[rpm] 

≤ 100 

[rpm] 

≤ 160 

[rpm] 

≤ 250 

[rpm] 

≤ 400 

[rpm] 

ccw 1035 1035 900 774 621 497 621 497 

cw 1035 1035 853 725 574 452 574 452 

ccw 1180 1180 1058 821 668 644 668 644 

cw 1179 1136 963 713 560 558 560 558 

ccw 1835 1835 1508 1181 1089 1019 1089 1019 

cw 1835 1712 1384 1055 990 963 990 963 

ccw 2009 1728 1334 1062 828 853 828 853 

cw 2009 1537 1143 871 646 686 646 686 

ccw 3336 2912 2219 1787 1589 1600 1589 1600 

cw 3215 2617 1926 1494 1316 1415 1316 1415 

ccw 4041 3337 2408 1807 1404 1508 1404 1508 

cw 3575 2869 1942 1341 968 1132 968 1132 

ccw 5688 4415 3562 2513 2061 2491 2061 2491 

cw 5150 3879 3026 1978 1528 2160 1528 2160 

ccw 5126 3917 2869 1940 2030 2644 2030 2644 

cw 4448 3242 2214 1262 1411 2282 1411 2282 

ccw 7742 6041 4869 2849 2921 3827 2921 3827 

cw 6856 5157 3985 1964 2093 3355 2093 3355 

ccw 24554 24554 24554 22113 19008 17874 19008 17874 

cw 24554 24554 24554 20975 17876 17042 17876 17042 

∗ 

≤ 16 

[rpm] 


≤ 25 

[rpm] 

≤ 40 

[rpm] 

≤ 63 

[rpm] 

≤ 100 

[rpm] 

≤ 160 

[rpm] 

≤ 250 

[rpm] 

≤ 400 

[rpm] 

ccw 3070 3070 3070 3070 3070 2981 3070 2981 

cw 3070 3070 3070 3070 2995 2853 2995 2853 

ccw 5267 5267 5267 5267 5267 5027 5267 5027 

cw 5267 5267 5267 5267 5144 4856 5144 4856 

ccw 6462 6462 6462 6462 6435 5891 6435 5891 

cw 6462 6462 6462 6462 5972 5630 5972 5630 

ccw 8082 8082 8082 8082 8082 8082 8082 8082 

cw 8082 8082 8082 8082 8082 8082 8082 8082 

ccw 11628 11628 11628 11628 11628 11036 11628 11036 

cw 11628 11628 11628 11628 11216 10708 11216 10708 

ccw 16641 16641 16641 16641 16641 16265 16641 16265 

cw 16641 16641 16641 16641 16641 15874 16641 15874 

ccw 25496 25496 25496 25496 25496 25496 25496 25496 

cw 25496 25496 25496 25496 25496 25496 25496 25496 

5 - 9




P Motor 

5 - 10 





n 2 

T 2 

T 1 








Prefered list 


(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




PMotor [hp] 

n2 (60 Hz) 

[rpm] 

T2 [lb in] 

SF 

[-] 

Ratio 

[-] 

Gear Motor 

0.25 (60 Hz) 0.05 291401 1.03 34420 FD.208-D68-LA71C4 

0.05 268983 1.12 31772 

0.06 233883 1.29 27626 

0.07 193898 1.55 22903 

0.08 177905 1.73 21014 

0.08 174257 1.73 20583 

0.09 163911 1.84 19361 

0.10 148858 2.02 17583 

0.10 135609 2.22 16018 

0.11 124231 2.42 14674 

0.13 110846 2.71 13093 

0.05 215180 0.82 31771 FD.188B-D48-LA71C4 

0.06 189944 0.93 28045 

0.07 155409 1.14 22946 

0.07 171346 1.03 25299 

0.08 141593 1.25 20906 

0.09 129510 1.37 19122 

0.10 122075 1.45 17537 FD.188B-Z48-LA71C4 

0.11 108027 1.64 15519 

0.12 98205 1.80 14108 

0.13 88223 2.01 12674 

0.08 141850 0.87 20944 FD.168B-D48-LA71C4 

0.09 129246 0.96 19083 

0.10 118213 1.05 17454 

0.10 111424 1.11 16007 FD.168B-Z48-LA71C4 

0.12 98602 1.26 14165 

0.13 89643 1.38 12878 

0.14 80525 1.54 11568 

0.17 69025 1.79 9916 

0.19 62447 1.98 8971 

0.14 81478 0.98 11705 FD.148B-Z38-LA71C4 

0.13 87200 0.91 12527 

0.16 71663 1.11 10295 

0.19 62760 1.27 9016 

0.21 55514 1.43 7975 

0.23 50307 1.58 7227 

0.26 44411 1.79 6380 

0.29 40060 1.99 5755 

0.19 60533 0.89 8696 FD.128B-Z38-LA71C4 

0.22 53537 1.01 7691 

0.24 48525 1.11 6971 

0.27 42831 1.26 6153 

0.30 38640 1.40 5551 

0.33 35042 1.54 5034 

0.37 31930 1.69 4587 

0.40 29201 1.85 4195 

0.31 37568 0.80 5397 FD.108B-Z38-LA71C4 

0.34 34074 0.88 4895 

0.38 31046 0.97 4460 

0.41 28394 1.06 4079 

0.46 25394 1.18 3648 

0.50 23312 1.29 3349 

5 - 11



P Motor 

[hp] 

5 - 12 

n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

0.55 21015 1.43 3019 FD.108B-Z38-LA71C4 

0.65 18071 1.66 2596 

0.72 16115 1.87 2315 

0.79 14799 2.03 2126 

0.59 19894 0.85 2858 FD.88B-Z28-LA71C4 

0.65 17973 0.94 2582 

0.74 15662 1.07 2250 

0.83 14068 1.19 2021 

0.92 12697 1.32 1824 

1.0 11513 1.46 1654 

1.1 10476 1.60 1505 

1.3 9265 1.81 1331 

1.4 8555 1.97 1229 

1.2 9801 0.90 1408 FD.68B-Z28-LA71C4 

1.3 8806 1.00 1265 

1.5 7949 1.11 1142 

1.6 7212 1.23 1036 

1.8 6557 1.35 942 

2.0 5798 1.53 833 

2.2 5353 1.65 769 

2.5 4608 1.92 662 

2.1 5464 0.87 785 FD.48B-Z28-LA71C4 

2.3 5047 0.95 725 

2.7 4344 1.10 624 

3.0 3947 1.21 567 

3.2 3592 1.33 516 

3.6 3258 1.47 468 

3.9 2965 1.61 426 

4.5 2617 1.83 376 

4.8 2415 1.98 347 

6.2 1871 2.55 268.8 FD.48B-LA71C4 

3.6 3195 0.80 459 FZ.38B-Z28-LA71C4 

4.0 2889 0.89 415 

4.5 2617 0.98 376 

4.9 2381 1.08 342 

5.5 2109 1.22 303 

6.0 2479 1.03 280.41 FD.38B-LA71C4 

6.9 2139 1.20 241.91 

8.1 1838 1.40 207.83 

8.8 1692 1.52 191.34 

9.6 1538 1.67 173.94 

10.9 1361 1.88 153.96 

13.0 1140 2.25 128.95 

9.6 1536 0.86 173.69 FD.28-LA71C4 

10.9 1359 0.98 153.74 

13.0 1139 1.17 128.77 

15.3 971 1.37 109.79 

17.9 825 1.61 93.32 

21 717 1.85 81.1 

24 624 2.13 70.59 

26 563 2.36 63.68 

30 497 2.67 56.2 

28 539 2.46 59.65 FZ.28-LA71C4 

33 454 2.92 50.3 

38 403 3.29 44.66 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.25 (60 Hz) 43 354 3.75 39.15 FZ.28-LA71C4 

48 316 4.19 35.04 

54 281 4.72 31.1 

61 246 5.39 27.25 

70 216 6.13 23.96 

77 195 6.79 21.64 

89 170 7.79 18.86 

99 153 8.67 16.94 

110 138 9.61 15.29 

121 125 10.59 13.87 

133 114 11.49 12.62 

150 101 12.46 11.16 

163 93 13.13 10.3 

189 80 14.47 8.87 

0.33 (60 Hz) 0.07 257482 1.17 22903 FD.208-D68-LA71S4 

0.08 236046 1.27 21014 

0.08 231400 1.30 20583 

0.09 217662 1.38 19361 

0.09 197673 1.52 17583 

0.10 180079 1.67 16018 

0.11 164969 1.82 14674 

0.13 147195 2.04 13093 

0.08 208917 0.85 20906 FD.188B-D48-LA71S4 

0.09 191089 0.93 19122 

0.09 179631 0.99 17537 FD.188B-Z48-LA71S4 

0.11 158961 1.11 15519 

0.12 144508 1.22 14108 

0.13 129820 1.36 12674 

0.15 111270 1.59 10863 

0.17 100678 1.76 9829 

0.18 92935 1.90 9073 

0.12 145092 0.85 14165 FD.168B-Z48-LA71S4 

0.13 131909 0.94 12878 

0.14 118491 1.05 11568 

0.17 101569 1.22 9916 

0.19 91890 1.35 8971 

0.20 84822 1.46 8281 

0.23 73760 1.68 7201 

0.25 66969 1.85 6538 

0.28 61151 2.03 5970 

0.18 92351 0.86 9016 FD.148B-Z38-LA71S4 

0.21 81688 0.97 7975 

0.23 74026 1.08 7227 

0.26 65350 1.22 6380 

0.29 58948 1.35 5755 

0.32 53468 1.49 5220 

0.35 48716 1.63 4756 

0.38 44557 1.79 4350 

0.43 39835 2.00 3889 

0.27 63025 0.86 6153 FD.128B-Z38-LA71S4 

0.30 56859 0.95 5551 

0.33 51563 1.05 5034 

0.36 46985 1.15 4587 

0.40 42969 1.26 4195 

0.44 38421 1.40 3751 

5 - 13




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.33 (60 Hz) 0.48 35287 1.53 3445 FD.128B-Z38-LA71S4 

0.54 31804 1.70 3105 

0.62 27349 1.97 2670 

0.46 37366 0.81 3648 FD.108B-Z38-LA71S4 

0.50 34304 0.88 3349 

0.55 30924 0.97 3019 

0.64 26591 1.13 2596 

0.72 23713 1.27 2315 

0.78 21777 1.38 2126 

0.87 19626 1.53 1916 

1.0 16870 1.78 1647 

1.1 15631 1.92 1526 

0.82 20701 0.81 2021 FD.88B-Z28-LA71S4 

0.91 18683 0.90 1824 

1.0 16942 0.99 1654 

1.1 15416 1.09 1505 

1.3 13633 1.23 1331 

1.4 12589 1.34 1229 

1.6 10837 1.55 1058 

1.7 9854 1.71 962 

1.9 8952 1.88 874 

1.6 10612 0.83 1036 FD.68B-Z28-LA71S4 

1.8 9649 0.92 942 

2.0 8532 1.04 833 

2.2 7877 1.12 769 

2.5 6781 1.30 662 

2.8 6166 1.43 602 

3.0 5603 1.58 547 

3.4 5081 1.74 496 

3.7 4630 1.91 452 

2.9 5808 0.82 567 FD.48B-Z28-LA71S4 

3.2 5285 0.90 516 

3.6 4794 1.00 468 

3.9 4364 1.09 426 

4.4 3851 1.24 376 

4.8 3554 1.34 347 

5.6 3063 1.56 299 

6.2 3156 1.51 268.8 FD.48B-LA71S4 

7.0 2802 1.70 238.65 

8.0 2457 1.94 209.23 

8.9 2199 2.17 187.24 

5.5 3104 0.83 303 FZ.38B-Z28-LA71S4 

6.9 2840 0.90 241.91 FD.38B-LA71S4 

8.0 2440 1.05 207.83 

8.7 2247 1.14 191.34 

9.6 2042 1.26 173.94 

10.8 1808 1.42 153.96 

12.9 1514 1.69 128.95 

15.1 1291 1.99 109.95 

17.8 1097 2.34 93.46 

12.9 1512 0.88 128.77 FD.28-LA71S4 

15.2 1289 1.03 109.79 

17.8 1096 1.21 93.32 

21 952 1.39 81.1 

24 829 1.60 70.59 

5 - 14 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.33 (60 Hz) 26 748 1.77 63.68 FD.28-LA71S4 

30 660 2.01 56.2 

28 715 1.86 59.65 FZ.28-LA71S4 

33 603 2.20 50.3 

37 536 2.48 44.66 

43 469 2.83 39.15 

48 420 3.16 35.04 

54 373 3.56 31.1 

61 327 4.06 27.25 

69 287 4.62 23.96 

77 260 5.11 21.64 

88 226 5.87 18.86 

98 203 6.53 16.94 

109 183 7.24 15.29 

120 166 7.98 13.87 

132 151 8.65 12.62 

149 134 9.39 11.16 

162 124 9.89 10.3 

188 106 10.90 8.87 

207 97 11.62 8.06 

231 86 12.90 7.2 

255 78 13.78 6.53 

280 71 14.66 5.94 

317 63 15.60 5.25 

0.5 (60 Hz) 0.10 296831 1.01 17583 FD.208-D68-LA71M4 

0.10 270411 1.11 16018 

0.11 247722 1.21 14674 

0.13 221032 1.36 13093 

0.13 206827 0.86 12674 FD.188B-Z48-LA71M4 

0.15 177273 1.00 10863 

0.17 160399 1.10 9829 

0.19 148062 1.20 9073 

0.21 128740 1.37 7889 

0.23 116893 1.51 7163 

0.26 106726 1.66 6540 

0.28 97930 1.81 6001 

0.30 90228 1.96 5529 

0.19 146398 0.85 8971 FD.168B-Z48-LA71M4 

0.20 135137 0.92 8281 

0.23 117513 1.05 7201 

0.26 106693 1.16 6538 

0.28 97424 1.27 5970 

0.31 89379 1.39 5477 

0.33 82346 1.50 5046 

0.37 74790 1.66 4583 

0.40 68132 1.82 4175 

0.44 62420 1.98 3825 

0.29 93916 0.85 5755 FD.148B-Z38-LA71M4 

0.32 85185 0.93 5220 

0.35 77613 1.03 4756 

0.39 70988 1.12 4350 

0.43 63464 1.25 3889 

0.47 58275 1.37 3571 

0.52 52531 1.52 3219 

0.61 45171 1.76 2768 

5 - 15




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.5 (60 Hz) 0.68 40275 1.98 2468 FD.148B-Z38-LA71M4 

0.40 68458 0.79 4195 FD.128B-Z38-LA71M4 

0.45 61212 0.88 3751 

0.49 56219 0.96 3445 

0.54 50670 1.07 3105 

0.63 43572 1.24 2670 

0.71 38855 1.39 2381 

0.77 35673 1.51 2186 

0.85 32148 1.68 1970 

0.99 27644 1.95 1694 

0.73 37778 0.80 2315 FD.108B-Z38-LA71M4 

0.79 34694 0.87 2126 

0.88 31267 0.96 1916 

1.0 26877 1.12 1647 

1.1 24903 1.21 1526 

1.2 22585 1.33 1384 

1.3 20578 1.46 1261 

1.5 18816 1.60 1153 

1.6 16825 1.79 1031 

1.8 15454 1.95 947 

1.3 21721 0.77 1331 FD.88B-Z28-LA71M4 

1.4 20056 0.84 1229 

1.6 17265 0.97 1058 

1.7 15699 1.07 962 

1.9 14263 1.18 874 

2.1 12941 1.30 793 

2.3 11766 1.43 721 

2.6 10412 1.61 638 

2.9 9612 1.75 589 

2.5 10803 0.82 662 FD.68B-Z28-LA71M4 

2.8 9824 0.90 602 

3.1 8926 0.99 547 

3.4 8094 1.09 496 

3.7 7376 1.20 452 

4.2 6511 1.36 399 

4.6 6022 1.47 369 

5.3 5173 1.71 317 

5.7 5222 1.69 296.18 FD.68B-LA71M4 

6.4 4644 1.91 263.39 

7.4 4029 2.20 228.48 

4.5 6136 0.78 376 FD.48B-Z28-LA71M4 

4.8 5663 0.84 347 

5.6 4879 0.98 299 

6.3 4739 1.01 268.8 FD.48B-LA71M4 

7.0 4208 1.14 238.65 

8.0 3689 1.29 209.23 

9.0 3301 1.45 187.24 

10.1 2930 1.63 166.19 

11.5 2568 1.86 145.63 

13.1 2258 2.12 128.04 

14.5 2040 2.34 115.68 

9.7 3067 0.84 173.94 FD.38B-LA71M4 

10.9 2715 0.94 153.96 

13.0 2274 1.13 128.95 

15.3 1939 1.32 109.95 

5 - 16 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.5 (60 Hz) 18.0 1648 1.56 93.46 FD.38B-LA71M4 

21 1432 1.79 81.22 

24 1247 2.06 70.7 

26 1124 2.28 63.77 

30 992 2.58 56.28 

30 1021 1.82 56.72 FZ.38B-LA71M4 

33 908 2.24 50.44 

21 1430 0.93 81.1 FD.28-LA71M4 

24 1245 1.07 70.59 

26 1123 1.18 63.68 

30 991 1.34 56.2 

28 1074 1.24 59.65 FZ.28-LA71M4 

33 906 1.47 50.3 

38 804 1.65 44.66 

43 705 1.88 39.15 

48 631 2.10 35.04 

54 560 2.37 31.1 

62 491 2.70 27.25 

70 431 3.08 23.96 

0.75 (60 Hz) 0.15 290703 1.04 11685 FD.208-D68-LAI80S4 

0.17 246892 1.22 9924 

0.21 205271 1.47 8251 FD.208-Z68-LAI80S4 

0.23 187483 1.60 7536 

0.26 166386 1.81 6688 

0.28 153574 1.96 6173 

0.31 138920 2.17 5584 

0.33 127924 2.35 5142 

0.36 118296 2.54 4755 

0.39 109813 2.74 4414 

0.44 96901 3.11 3895 

0.48 89462 3.36 3596 

0.53 80158 3.75 3222 

0.19 218197 0.81 9073 FD.188B-Z48-LAI80S4 

0.22 189723 0.93 7889 

0.24 172263 1.03 7163 

0.26 157281 1.13 6540 

0.28 144318 1.23 6001 

0.31 132967 1.33 5529 

0.34 120750 1.47 5021 

0.37 110000 1.61 4574 

0.41 100765 1.76 4190 

0.46 89919 1.97 3739 

0.29 143573 0.86 5970 FD.168B-Z48-LAI80S4 

0.31 131716 0.94 5477 

0.34 121351 1.02 5046 

0.37 110217 1.12 4583 

0.41 100405 1.23 4175 

0.45 91987 1.35 3825 

0.50 82079 1.51 3413 

0.44 93527 0.85 3889 FD.148B-Z38-LAI80S4 

0.48 85879 0.93 3571 

0.53 77414 1.03 3219 

0.62 66568 1.20 2768 

0.69 59353 1.34 2468 

0.75 54495 1.46 2266 

5 - 17




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.75 (60 Hz) 0.84 49132 1.62 2043 FD.148B-Z38-LAI80S4 

0.97 42254 1.88 1757 

1.0 39296 2.03 1634 FD.148B-Z48-LAI80S4 

0.64 64211 0.84 2670 FD.128B-Z38-LAI80S4 

0.72 57261 0.94 2381 

0.78 52571 1.03 2186 

0.87 47377 1.14 1970 

1.0 40739 1.32 1694 

1.1 36170 1.49 1504 FD.128B-Z48-LAI80S4 

1.2 32947 1.64 1370 

1.4 30182 1.79 1255 

1.5 26935 2.00 1120 

1.1 36699 0.82 1526 FD.108B-Z38-LAI80S4 

1.2 33284 0.90 1384 

1.4 30326 0.99 1261 

1.5 27729 1.08 1153 

1.7 24795 1.21 1031 

1.8 22774 1.32 947 

2.0 20514 1.47 853 

2.3 17652 1.70 734 

2.3 17604 1.71 732 

2.6 15728 1.91 654 

2.1 19411 0.87 793 FD.88B-Z28-LA71ZMP4 

2.3 17649 0.95 721 

2.6 15617 1.08 638 

2.9 14418 1.17 589 

3.3 12411 1.35 507 

3.6 11285 1.49 461 

4.2 10521 1.60 404.92 FD.88B-LAI80S4 

4.8 9311 1.81 358.33 

5.2 8465 1.99 325.76 

5.8 7604 2.21 292.64 

3.7 11064 0.80 452 FD.68B-Z28-LA71ZMP4 

4.2 9767 0.91 399 

4.6 9033 0.98 369 

5.3 7760 1.14 317 

5.8 7696 1.15 296.18 FD.68B-LAI80S4 

6.5 6844 1.29 263.39 

7.5 5937 1.49 228.48 

8.0 5547 1.60 213.48 

9.1 4879 1.81 187.76 

10.4 4273 2.07 164.44 

11.8 3779 2.34 145.44 

8.2 5437 0.88 209.23 FD.48B-LAI80S4 

9.1 4865 0.98 187.24 

10.3 4318 1.11 166.19 

11.7 3784 1.26 145.63 

13.4 3327 1.44 128.04 

14.8 3006 1.59 115.68 

17.0 2619 1.82 100.8 

18.9 2352 2.03 90.53 

21 2124 2.25 81.73 

23 1925 2.48 74.1 

28 1611 2.20 60.71 FZ.48B-LAI80S4 

15.6 2857 0.90 109.95 FD.38B-LAI80S4 

5 - 18 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.75 (60 Hz) 18.3 2428 1.06 93.46 FD.38B-LAI80S4 

21 2110 1.22 81.22 

24 1837 1.40 70.7 

27 1657 1.55 63.77 

30 1462 1.75 56.28 

30 1505 1.23 56.72 FZ.38B-LAI80S4 

34 1339 1.52 50.44 

39 1161 1.91 43.75 

42 1085 2.24 40.88 

48 954 2.69 35.96 

30 1486 0.89 56.2 FD.28-LA71ZMP4 

28 1611 0.82 59.65 FZ.28-LA71ZMP4 

33 1359 0.98 50.3 

38 1206 1.10 44.66 

43 1057 1.25 39.15 

48 946 1.40 35.04 

54 840 1.58 31.1 

62 736 1.80 27.25 

70 647 2.05 23.96 

78 585 2.27 21.64 

89 509 2.60 18.86 

99 458 2.90 16.94 

110 413 3.21 15.29 

121 375 3.54 13.87 

133 341 3.84 12.62 

1 (60 Hz) 0.21 273694 1.10 8251 FD.208-Z68-LA80M4 

0.23 249977 1.2 7536 

0.26 221848 1.36 6688 

0.28 204765 1.47 6173 

0.31 185227 1.62 5584 

0.33 170566 1.76 5142 

0.36 157728 1.91 4755 

0.39 146417 2.06 4414 

0.44 129201 2.33 3895 

0.48 119283 2.52 3596 

0.53 106877 2.82 3222 

0.26 216939 0.82 6540 FD.188B-Z48-LA80M4 

0.28 199059 0.89 6001 

0.31 183403 0.96 5529 

0.34 166552 1.06 5021 

0.37 151724 1.17 4574 

0.41 138987 1.27 4190 

0.46 124027 1.43 3739 

0.51 110692 1.60 3337 

0.60 94007 1.88 2834 

0.37 152023 0.81 4583 FD.168B-Z48-LA80M4 

0.41 138489 0.89 4175 

0.45 126879 0.98 3825 

0.50 113213 1.09 3413 

0.56 101039 1.23 3046 

0.66 85814 1.44 2587 

0.79 71417 1.73 2153 

0.81 70289 1.76 2119 

0.90 62726 1.97 1891 

0.62 91817 0.87 2768 FD.148B-Z38-LA80M4 

5 - 19




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

1 (60 Hz) 0.69 81866 0.97 2468 FD.148B-Z38-LA80M4 

0.75 75166 1.06 2266 

0.84 67768 1.18 2043 

0.97 58282 1.37 1757 

1.0 54202 1.47 1634 FD.148B-Z48-LA80M4 

1.1 49392 1.61 1489 

1.3 45245 1.76 1364 

1.4 40369 1.97 1217 

1.1 49889 1.08 1504 FD.128B-Z48-LA80M4 

1.2 45444 1.19 1370 

1.4 41630 1.30 1255 

1.5 37152 1.45 1120 

1.7 33138 1.63 999 

2.0 28162 1.92 849 

0.87 65347 0.83 1970 FD.128B-Z38-LA80M4 

1.0 56192 0.96 1694 

1.7 34199 0.88 1031 FD.108B-Z38-LA80M4 

1.8 31413 0.96 947 

2.0 28295 1.06 853 

2.3 24281 1.24 732 

2.3 24348 1.24 734 

2.6 21694 1.39 654 

2.8 19936 1.51 601 

3.2 17946 1.68 541 

3.7 15458 1.95 466 

4.0 14081 2.14 424.49 FD.108B-LA80M4 

2.8 20434 0.82 589 FD.88B-Z28-LA71ZMD4 

3.2 17589 0.96 507 

3.5 15993 1.05 461 

4.2 14029 1.20 404.92 FD.88B-LA80M4 

4.8 12414 1.35 358.33 

5.2 11286 1.49 325.76 

5.8 10139 1.66 292.64 

6.8 8690 1.93 250.83 

7.5 7862 2.14 226.94 

5.2 10998 0.80 317 FD.68B-Z28-LA71ZMD4 

5.8 10261 0.86 296.18 FD.68B-LA80M4 

6.5 9125 0.97 263.39 

7.5 7916 1.12 228.48 

8.0 7396 1.20 213.48 

9.1 6505 1.36 187.76 

10.4 5697 1.55 164.44 

11.8 5039 1.76 145.44 

13.0 4567 1.94 131.82 

14.7 4031 2.19 116.36 

16.3 3636 2.43 104.96 

11.7 5045 0.95 145.63 FD.48B-LA80M4 

13.4 4436 1.08 128.04 

14.8 4008 1.19 115.68 

17.0 3492 1.37 100.8 

18.9 3136 1.52 90.53 

21 2832 1.69 81.73 

23 2567 1.86 74.1 

25 2336 2.04 67.43 

29 2066 2.31 59.62 

5 - 20 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

1 (60 Hz) 31 1908 2.50 55.06 FD.48B-LA80M4 

28 2148 1.65 60.71 FZ.48B-LA80M4 

31 1953 2.27 55.19 

34 1754 2.72 49.58 

21 2814 0.91 81.22 FD.38B-LA80M4 

24 2449 1.05 70.7 

27 2209 1.16 63.77 

30 1950 1.32 56.28 

30 2007 0.93 56.72 FZ.38B-LA80M4 

34 1785 1.14 50.44 

39 1548 1.43 43.75 

42 1446 1.68 40.88 

48 1272 2.02 35.96 

54 1114 2.30 31.49 

61 985 2.60 27.85 

68 893 2.87 25.24 

77 788 3.25 22.28 

42 1449 0.92 39.15 FZ.28-LA71ZMD4 

47 1297 1.02 35.04 

53 1151 1.15 31.1 

60 1008 1.32 27.25 

68 887 1.50 23.96 

76 801 1.66 21.64 

87 698 1.90 18.86 

97 627 2.12 16.94 

107 566 2.35 15.29 

118 513 2.59 13.87 

130 467 2.80 12.62 

147 413 3.04 11.16 

159 381 3.20 10.3 

184 328 3.53 8.87 

203 298 3.77 8.06 

227 266 4.18 7.2 

250 242 4.47 6.53 

275 220 4.75 5.94 

311 194 5.05 5.25 

1.5 (60 Hz) 0.28 299272 1.01 6173 FD.208-Z68-LA90SB4E 

0.31 270717 1.11 5584 

0.34 249288 1.21 5142 

0.37 230526 1.31 4755 

0.40 213994 1.41 4414 

0.45 188833 1.59 3895 

0.49 174337 1.73 3596 

0.54 156205 1.93 3222 

0.59 143988 2.09 2970 

0.70 120814 2.49 2492 

0.83 103070 2.92 2126 

0.42 203134 0.87 4190 FD.188B-Z48-LA90SB4E 

0.47 181270 0.98 3739 

0.53 161780 1.09 3337 

0.62 137395 1.29 2834 

0.74 114366 1.55 2359 

0.76 112572 1.57 2322 

0.85 100452 1.76 2072 

1.4 62928 1.97 1298 FD.168B-Z68-LA90SB4E 

5 - 21




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

1.5 (60 Hz) 0.58 147672 0.84 3046 FD.168B-Z48-LA90SB4E 

0.68 125420 0.99 2587 

0.82 104379 1.19 2153 

0.83 102731 1.21 2119 

0.93 91677 1.35 1891 

1.1 77860 1.59 1606 

1.3 64819 1.91 1337 

0.86 99046 0.80 2043 FD.148B-Z38-LA90SB4E 

1.0 85181 0.93 1757 

1.1 79218 1.01 1634 FD.148B-Z48-LA90SB4E 

1.2 72188 1.10 1489 

1.3 66128 1.20 1364 

1.4 59001 1.35 1217 

1.6 52650 1.51 1086 

1.9 44699 1.78 922 

1.3 66419 0.81 1370 FD.128B-Z48-LA90SB4E 

1.4 60843 0.89 1255 

1.6 54298 0.99 1120 

1.8 48432 1.11 999 

2.1 41160 1.31 849 

2.5 34227 1.58 706 

2.5 33694 1.60 695 

2.8 30058 1.80 620 

2.4 35488 0.85 732 FD.108B-Z38-LA90SB4E 

2.4 35585 0.85 734 

2.7 31706 0.95 654 

2.9 29137 1.03 601 

3.2 26228 1.15 541 

3.8 22592 1.33 466 

4.1 21494 1.40 424.49 FD.108B-LA90SB4E 

4.6 19383 1.55 382.79 

5.1 17479 1.72 345.19 

5.8 15286 1.97 301.88 

6.5 13723 2.19 271.01 

4.9 18144 0.93 358.33 FD.88B-LA90SB4E 

5.4 16495 1.02 325.76 

6.0 14818 1.13 292.64 

7.0 12701 1.32 250.83 

7.7 11491 1.46 226.94 

8.4 10608 1.58 209.49 

9.6 9223 1.82 182.15 

10.6 8374 2.01 165.38 

11.6 7646 2.20 151.01 

12.7 7016 2.40 138.56 

9.3 9507 0.93 187.76 FD.68B-LA90SB4E 

10.7 8326 1.06 164.44 

12.1 7364 1.20 145.44 

13.3 6675 1.33 131.82 

15.1 5892 1.50 116.36 

16.7 5315 1.66 104.96 

18.4 4820 1.84 95.2 

20 4392 2.01 86.74 

22 4017 2.20 79.33 

25 3592 2.46 70.93 

29 3163 2.38 61.17 FZ.68B-LA90SB4E 

5 - 22 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

1.5 (60 Hz) 17.4 5104 0.94 100.8 FD.48B-LA90SB4E 

19.4 4584 1.04 90.53 

21 4138 1.15 81.73 

24 3752 1.27 74.1 

26 3414 1.40 67.43 

29 3019 1.58 59.62 

32 2788 1.71 55.06 

37 2400 1.99 47.4 

41 2182 2.19 43.09 

29 3139 1.13 60.71 FZ.48B-LA90SB4E 

32 2854 1.55 55.19 

35 2564 1.86 49.58 

41 2198 2.17 42.5 

46 1988 2.40 38.45 

49 1835 2.60 35.49 

57 1596 2.99 30.86 

31 2850 0.90 56.28 FD.38B-LA90SB4E 

40 2262 0.98 43.75 FZ.38B-LA90SB4E 

43 2114 1.15 40.88 

49 1860 1.38 35.96 

56 1628 1.58 31.49 

63 1440 1.78 27.85 

70 1305 1.97 25.24 

79 1152 2.23 22.28 

87 1039 2.47 20.1 

96 943 2.72 18.23 

106 859 2.99 16.61 

116 786 3.27 15.19 

129 702 3.65 13.58 

141 645 3.98 12.47 

64 1409 0.94 27.25 FZ.28-LA90SB4E 

73 1239 1.07 23.96 

81 1119 1.19 21.64 

93 975 1.36 18.86 

104 876 1.51 16.94 

115 791 1.68 15.29 

127 717 1.85 13.87 

139 653 2.01 12.62 

157 577 2.18 11.16 

170 533 2.29 10.3 

199 459 2.53 8.87 

218 417 2.69 8.06 

244 372 2.99 7.2 

269 338 3.20 6.53 

295 307 3.40 5.94 

334 271 3.62 5.25 

362 251 3.88 4.85 

420 216 4.05 4.18 

462 197 4.33 3.8 

2 (60 Hz) 0.40 282111 1.07 4414 FD.208-Z68-LA90ZLB4E 

0.46 248940 1.21 3895 

0.49 229830 1.31 3596 

0.55 205927 1.46 3222 

0.60 189821 1.59 2970 

0.71 159270 1.89 2492 

5 - 23




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

2 (60 Hz) 0.83 135878 2.21 2126 FD.208-Z68-LA90ZLB4E 

1.37 82831 3.63 1296 

0.63 181129 0.98 2834 FD.188B-Z48-LA90ZLB4E 

0.75 150770 1.17 2359 

0.76 148405 1.19 2322 

0.86 132427 1.34 2072 

1.0 112486 1.57 1760 

1.2 93632 1.89 1465 

1.2 92609 1.91 1449 FD.188B-Z68-LA90ZLB4E 

0.82 137604 0.90 2153 FD.168B-Z48-LA90ZLB4E 

0.84 135431 0.91 2119 

0.94 120859 1.02 1891 

1.1 102644 1.21 1606 

1.3 85451 1.45 1337 

1.4 82959 1.49 1298 FD.168B-Z68-LA90ZLB4E 

1.6 70815 1.75 1108 

1.3 87177 0.91 1364 FD.148B-Z48-LA90ZLB4E 

1.5 77782 1.02 1217 

1.6 69409 1.15 1086 

1.9 58927 1.35 922 

2.3 49085 1.62 768 

2.6 43077 1.85 674 

1.8 63849 0.85 999 FD.128B-Z48-LA90ZLB4E 

2.1 54262 0.99 849 

2.5 45122 1.20 706 

2.6 44419 1.22 695 

2.9 39626 1.36 620 

3.4 33682 1.60 527 

4.0 28058 1.92 439 

4.0 29903 1.80 447.96 FD.128B-LA90ZLB4E 

4.4 27066 1.99 405.47 

3.3 34577 0.87 541 FD.108B-Z38-LA90ZLB4E 

3.8 29783 1.01 466 

4.2 28336 1.06 424.49 FD.108B-LA90ZLB4E 

4.6 25552 1.18 382.79 

5.1 23043 1.31 345.19 

5.9 20151 1.49 301.88 

6.5 18091 1.66 271.01 

7.2 16523 1.82 247.53 

8.1 14663 2.05 219.66 

8.8 13536 2.22 202.77 

7.1 16744 1.00 250.83 FD.88B-LA90ZLB4E 

7.8 15149 1.11 226.94 

8.5 13984 1.20 209.49 

9.7 12159 1.38 182.15 

10.7 11040 1.52 165.38 

11.8 10080 1.67 151.01 

12.8 9249 1.82 138.56 

13.9 8522 1.97 127.66 

15.3 7739 2.17 115.93 

16.8 7050 2.38 105.61 

12.2 9709 0.91 145.44 FD.68B-LA90ZLB4E 

13.5 8799 1.01 131.82 

15.3 7767 1.14 116.36 

16.9 7006 1.26 104.96 

5 - 24 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

2 (60 Hz) 18.6 6355 1.39 95.20 FD.68B-LA90ZLB4E 

20 5790 1.53 86.74 

22 5296 1.67 79.33 

25 4735 1.87 70.93 

27 4348 2.03 65.14 

30 3919 2.26 58.71 

35 3370 2.63 50.48 

29 4170 1.80 61.17 FZ.68B-LA90ZLB4E 

33 3647 2.43 53.5 

37 3274 2.70 48.03 

40 2991 2.96 43.87 

24 4946 0.97 74.1 FD.48B-LA90ZLB4E 

26 4501 1.06 67.43 

30 3980 1.20 59.62 

32 3675 1.30 55.06 

37 3164 1.51 47.4 

41 2876 1.66 43.09 

32 3762 1.18 55.19 FZ.48B-LA90ZLB4E 

36 3380 1.41 49.58 

42 2897 1.65 42.5 

46 2621 1.82 38.45 

50 2419 1.97 35.49 

58 2104 2.27 30.86 

63 1910 2.50 28.02 

69 1745 2.74 25.59 

76 1601 2.98 23.48 

82 1475 3.24 21.63 

90 1339 3.57 19.64 

43 2787 0.87 40.88 FZ.38B-LA90ZLB4E 

49 2452 1.05 35.96 

56 2147 1.19 31.49 

64 1899 1.35 27.85 

70 1721 1.49 25.24 

80 1519 1.69 22.28 

88 1370 1.87 20.1 

97 1243 2.06 18.23 

107 1132 2.27 16.61 

117 1036 2.48 15.19 

131 926 2.77 13.58 

142 850 3.02 12.47 

158 766 3.35 11.24 

184 659 3.89 9.67 

208 581 4.42 8.52 

229 529 4.85 7.76 

82 1475 0.90 21.64 FZ.28-LA90ZLB4E 

94 1286 1.03 18.86 

105 1155 1.15 16.94 

116 1042 1.27 15.29 

128 946 1.40 13.87 

141 860 1.52 12.62 

159 761 1.65 11.16 

172 702 1.74 10.3 

200 605 1.92 8.87 

220 549 2.04 8.06 

247 491 2.27 7.2 

5 - 25




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

2 (60 Hz) 272 445 2.42 6.53 FZ.28-LA90ZLB4E 

299 405 2.58 5.94 

338 358 2.74 5.25 

366 331 2.94 4.85 

425 285 3.07 4.18 

467 259 3.28 3.8 

3 (60 Hz) 0.59 288799 1.04 2970 FD.208-Z68-LA100ZLP4E 

0.70 242319 1.24 2492 

0,82 206729 1.46 2126 

0.99 172307 1.75 1772 

1.19 142843 2.11 1469 

1.35 126021 2.39 1296 

1.58 107546 2.80 1106 

1.90 89557 3.36 921 

2.29 74290 4.05 764 

0.84 201478 0.88 2072 FD.188B-Z48-LA100ZLP4E 

0.99 171140 1.03 1760 

1.2 142455 1.24 1465 

1.2 140899 1.26 1449 FD.188B-Z68-LA100ZLP4E 

1.4 120187 1.47 1236 

1.7 100156 1.77 1030 

1.3 130008 0.95 1337 FD.168B-Z48-LA100ZLP4E 

1.3 126216 0.98 1298 FD.168B-Z68-LA100ZLP4E 

1.6 107740 1.15 1108 

1.9 89751 1.38 923 

2.3 74388 1.67 765 

2.6 65636 1.89 675 

1.9 89654 0.89 922 FD.148B-Z48-LA100ZLP4E 

2.3 74679 1.07 768 

2.6 65539 1.22 674 

3.1 55718 1.43 573 

3.7 46383 1.72 477 

3.9 45622 1.75 449.21 FD.148B-LA100ZLP4E 

4.2 41841 1.90 411.98 

4.8 37380 2.13 368.06 

2.8 60288 0.90 620 FD.128B-Z48-LA100ZLP4E 

3.3 51245 1.05 527 

4.0 42688 1.26 439 

4.9 36053 1.50 354.99 FD.128B-LA100ZLP4E 

5.5 32524 1.66 320.24 

6.0 29780 1.81 293.22 

6.7 26491 2.04 260.84 

7.3 24211 2.23 238.39 

5.8 30659 0.98 301.88 FD.108B-LA100ZLP4E 

6.5 27524 1.09 271.01 

7.1 25139 1.20 247.53 

8.0 22309 1.35 219.66 

8.6 20593 1.46 202.77 

9.5 18625 1.62 183.39 

10.4 17152 1.75 168.88 

11.2 15863 1.90 156.19 

12.1 14725 2.04 144.99 

13.7 12992 2.32 127.92 

9.6 18499 0.91 182.15 FD.88B-LA100ZLP4E 

10.6 16796 1.00 165.38 

5 - 26 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

3 (60 Hz) 11.6 15337 1.10 151.01 FD.88B-LA100ZLP4E 

12.6 14072 1.19 138.56 

13.7 12965 1.30 127.66 

15.1 11774 1.43 115.93 

16.6 10726 1.57 105.61 

18.1 9826 1.71 96.75 

20 8768 1.92 86.33 

23 7824 2.15 77.04 

27 6645 2.53 65.43 

27 6698 2.51 64.58 FZ.88B-LA100ZLP4E 

18.4 9669 0.92 95.2 FD.68B-LA100ZLP4E 

20 8809 1.00 86.74 

22 8057 1.10 79.33 

25 7204 1.23 70.93 

27 6616 1.34 65.14 

30 5963 1.48 58.71 

35 5127 1.73 50.48 

33 5549 1.59 53.5 FZ.68B-LA100ZLP4E 

36 4982 1.78 48.03 

40 4550 1.94 43.87 

45 4038 2.19 38.93 

49 3727 2.37 35.93 

54 3371 2.62 32.5 

58 3104 2.85 29.93 

63 2871 3.08 27.68 

32 5592 0.85 55.06 FD.48B-LA100ZLP4E 

37 4814 0.99 47.4 

41 4376 1.09 43.09 

41 4408 1.08 42.5 FZ.48B-LA100ZLP4E 

46 3988 1.20 38.45 

49 3681 1.30 35.49 

57 3201 1.49 30.86 

62 2906 1.64 28.02 

68 2654 1.80 25.59 

75 2435 1.96 23.48 

81 2243 2.13 21.63 

89 2037 2.35 19.64 

98 1856 2.57 17.89 

107 1700 2.81 16.39 

120 1517 3.15 14.63 

134 1354 3.53 13.05 

158 1150 4.11 11.09 

63 2889 0.89 27.85 FZ.38B-LA100ZLP4E 

69 2618 0.98 25.24 

79 2311 1.11 22.28 

87 2085 1.23 20.1 

96 1891 1.36 18.23 

105 1723 1.49 16.61 

115 1576 1.63 15.19 

129 1409 1.82 13.58 

140 1293 1.98 12.47 

156 1166 2.20 11.24 

181 1003 2.56 9.67 

205 884 2.90 8.52 

226 805 3.19 7.76 

5 - 27




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

3 (60 Hz) 246 736 3.48 7.1 FZ.38B-LA100ZLP4E 

276 659 3.69 6.35 

300 605 4.02 5.83 

333 545 4.11 5.25 

387 469 4.30 4.52 

110 1652 0.80 15.29 FZ.28-LA90ZLB4 

121 1499 0.89 13.87 

133 1364 0.96 12.62 

151 1206 1.04 11.16 

163 1113 1.10 10.3 

189 958 1.21 8.87 

208 871 1.29 8.06 

233 778 1.43 7.2 

257 706 1.53 6.53 

283 642 1.63 5.94 

320 567 1.73 5.25 

346 524 1.86 4.85 

402 452 1.94 4.18 

442 411 2.07 3.8 

4 (60 Hz) 0.82 275639 1.09 2126 FD.208-Z68-LA100ZLD4E 

0.99 229742 1.31 1772 

1.19 190458 1.58 1469 

1.35 168028 1.79 1296 

1.58 143394 2.10 1106 

1.90 119409 2.52 921 

2.29 99054 3.04 764 

2.52 89978 3.34 694 FD.208-Z88-LA100ZLD4E 

2.75 82458 3.65 636 

1.2 187865 0.94 1449 FD.188B-Z68-LA100ZLD4E 

1.4 160249 1.10 1236 

1.7 133541 1.33 1030 

2.0 110722 1.60 854 

2.3 97757 1.81 754 

2.7 83366 2.12 643 

1.2 189939 0.93 1465 FD.188B-Z48-LA100ZLD4E 

1.6 143654 0.86 1108 FD.168B-Z68-LA100LD4E 

1.9 119668 1.04 923 

2.3 99183 1.25 765 

2.6 87515 1.42 675 

3.0 74679 1.66 576 

3.6 62233 1.99 480 

2.6 87385 0.91 674 FD.148B-Z48-LA100ZLD4E 

3.1 74290 1.07 573 

3.7 61844 1.29 477 

3.9 60829 1.31 449.21 FD.148B-LA100ZLD4E 

4.2 55788 1.43 411.98 

4.8 49840 1.60 368.06 

5.2 45644 1.74 337.07 

5.6 42047 1.89 310.51 

6.1 38930 2.05 287.49 

6.5 36203 2.20 267.35 

4.0 56917 0.95 439 FD.128B-Z48-LA100ZLD4E 

4.9 48071 1.12 354.99 FD.128B-LA100ZLD4E 

5.5 43365 1.24 320.24 

6.0 39706 1.36 293.22 

5 - 28 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


P Motor 

[hp] 


n2 (60 Hz) 

T2 SF 

Ratio 

Gear Motor 

[rpm] 

[lb in] 

[-] 

[-] 

6.7 35321 1.53 260.84 FD.128B-LA100ZLD4E 

7.3 32281 1.67 238.39 

8.0 29676 1.82 219.15 

8.6 27419 1.97 202.48 

9.3 25442 2.12 187.88 

10.0 23699 2.28 175.01 

7.1 33519 0.90 247.53 FD.108B-LA100ZLD4E 

8.0 29745 1.01 219.66 

8.6 27458 1.10 202.77 

9.5 24834 1.21 183.39 

10.4 22869 1.32 168.88 

11.2 21150 1.42 156.19 

12.1 19634 1.53 144.99 

13.7 17322 1.74 127.92 

14.8 15994 1.88 118.11 

16.5 14328 2.10 105.81 

17.9 13212 2.28 97.57 

12.6 18763 0.90 138.56 FD.88B-LA100ZLD4E 

13.7 17287 0.97 127.66 

15.1 15699 1.07 115.93 

16.6 14301 1.18 105.61 

18.1 13101 1.28 96.75 

20 11690 1.44 86.33 

23 10432 1.61 77.04 

27 8860 1.90 65.43 

32 7376 2.28 54.47 

27 8931 1.88 64.58 FZ.88B-LA100ZLD4E 

30 8177 2.06 59.13 

33 7274 2.31 52.60 

36 6642 2.53 48.03 

40 6113 2.75 44.20 

25 9605 0.92 70.93 FD.68B-LA100ZLD4E 

27 8821 1.00 65.14 

30 7950 1.11 58.71 

35 6836 1.29 50.48 

33 7399 1.20 53.50 FZ.68B-LA100ZLD4E 

36 6642 1.33 48.03 

40 6067 1.46 43.87 

45 5384 1.64 38.93 

49 4969 1.78 35.93 

54 4495 1.97 32.50 

58 4139 2.14 29.93 

63 3828 2.31 27.68 

68 3553 2.49 25.69 

77 3135 2.82 22.67 

84 2895 3.06 20.93 

93 2593 3.41 18.75 

101 2391 3.70 17.29 

46 5317 0.90 38.45 FZ.48B-LA100ZLD4E 

49 4908 0.97 35.49 

57 4268 1.12 30.86 

62 3875 1.23 28.02 

68 3539 1.35 25.59 

75 3247 1.47 23.48 

81 2991 1.60 21.63 

5 - 29




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

4 (60 Hz) 89 2716 1.76 19.64 FZ.48B-LA100ZLD4E 

98 2474 1.93 17.89 

107 2267 2.11 16.39 

120 2023 2.36 14.63 

134 1805 2.65 13.05 

158 1534 3.09 11.09 

190 1276 3.65 9.23 

209 1160 3.89 8.39 

228 1062 3.89 7.68 

255 949 4.13 6.86 

286 846 4.24 6.12 

337 719 4.65 5.2 

404 599 4.80 4.33 

87 2780 0.92 20.1 FZ.38B-LA100ZLD4E 

96 2521 1.02 18.23 

105 2297 1.12 16.61 

115 2101 1.22 15.19 

129 1878 1.37 13.58 

140 1725 1.49 12.47 

156 1554 1.65 11.24 

181 1337 1.92 9.67 

205 1178 2.18 8.52 

226 1073 2.39 7.76 

246 982 2.61 7.1 

276 878 2.77 6.35 

300 806 3.02 5.83 

333 726 3.08 5.25 

387 625 3.23 4.52 

170 1424 0.86 10.3 FZ.28-LA100ZLD4E 

197 1227 0.94 8.87 

217 1115 1.01 8.06 

243 996 1.12 7.2 

268 903 1.19 6.53 

295 821 1.27 5.94 

333 726 1.35 5.25 

361 671 1.45 4.85 

419 578 1.51 4.18 

461 526 1.62 3.8 

5.5 (60 Hz) 1.19 261880 1.15 1469 FD.208-Z68-LA112ZMP4E 

1.35 231039 1.30 1296 

1.58 197167 1.53 1106 

1.90 164187 1.83 921 

2.29 136199 2.21 764 

2.52 123720 2.43 694 FD.208-Z88-LA112ZMP4E 

2.75 113380 2.65 636 

3.22 96801 3.11 543 

3.93 79330 3.79 445 

1.4 219715 0.81 1236 FD.188B-Z68-LA112ZMP4E 

1.7 183096 0.97 1030 

2.1 151809 1.17 854 

2.3 134033 1.32 754 

2.7 114301 1.55 643 

3.3 95281 1.86 536 

2.3 135989 0.91 765 FD.168B-Z68-LA112ZMP4E 

2.6 119990 1.03 675 

5 - 30 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

5.5 (60 Hz) 3.0 102391 1.21 576 FD.168B-Z68-LA112ZMP4E 

3.7 85326 1.45 480 

4.4 70750 1.75 398 

3.7 84793 0.94 477 FD.148B-Z48-LA112ZMP4E 

3.9 83402 0.95 449.21 FD.148B-LA112ZMP4E 

4.3 76490 1.04 411.98 

4.8 68335 1.17 368.06 

5.2 62582 1.27 337.07 

5.7 57650 1.38 310.51 

6.1 53376 1.49 287.49 

6.6 49637 1.60 267.35 

7.0 46338 1.72 249.58 

7.9 41460 1.92 223.31 

8.5 38419 2.07 206.93 

5.5 59457 0.91 320.24 FD.128B-LA112ZMP4E 

6.0 54440 0.99 293.22 

6.7 48428 1.11 260.84 

7.4 44260 1.22 238.39 

8.0 40688 1.33 219.15 

8.7 37593 1.44 202.48 

9.3 34882 1.55 187.88 

10.0 32493 1.66 175.01 

11.1 29376 1.84 158.22 

12.0 27044 2.00 145.66 

13.4 24324 2.22 131.01 

9.6 34049 0.88 183.39 FD.108B-LA112ZMP4E 

10.4 31355 0.96 168.88 

11.2 28999 1.04 156.19 

12.1 26919 1.12 144.99 

13.7 23750 1.27 127.92 

14.9 21929 1.37 118.11 

16.6 19645 1.53 105.81 

18.0 18115 1.66 97.57 

21 15198 1.98 81.86 

25 12967 2.32 69.84 

27 12175 2.18 64.21 FZ.108B-LA112ZMP4E 

30 11149 2.38 58.8 

16.6 19608 0.86 105.61 FD.88B-LA112ZMP4E 

18.1 17963 0.94 96.75 

20 16028 1.05 86.33 

23 14304 1.18 77.04 

27 12148 1.38 65.43 

32 10113 1.66 54.47 

27 12245 1.37 64.58 FZ.88B-LA112ZMP4E 

30 11212 1.50 59.13 

33 9974 1.69 52.6 

37 9107 1.85 48.03 

40 8381 2.01 44.2 

43 7742 2.17 40.83 

46 7184 2.34 37.89 

50 6691 2.51 35.29 

55 6051 2.78 31.91 

60 5571 3.02 29.38 

37 9107 0.97 48.03 FZ.68B-LA112ZMP4E 

40 8318 1.06 43.87 

5 - 31




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

5.5 (60 Hz) 45 7382 1.20 38.93 FZ.68B-LA112ZMP4E 

49 6813 1.30 35.93 

54 6162 1.44 32.5 

59 5675 1.56 29.93 

63 5249 1.69 27.68 

68 4871 1.82 25.69 

77 4299 2.06 22.67 

84 3969 2.23 20.93 

94 3555 2.49 18.75 

102 3278 2.70 17.29 

121 2751 3.22 14.51 

142 2347 3.77 12.38 

57 5851 0.82 30.86 FZ.48B-LA112ZMP4E 

63 5313 0.90 28.02 

69 4852 0.98 25.59 

75 4452 1.07 23.48 

81 4101 1.16 21.63 

89 3724 1.28 19.64 

98 3392 1.41 17.89 

107 3108 1.54 16.39 

120 2774 1.72 14.63 

134 2474 1.93 13.05 

158 2103 2.25 11.09 

190 1750 2.66 9.23 

209 1591 2.84 8.39 

229 1456 2.84 7.68 

256 1301 3.01 6.86 

287 1160 3.10 6.12 

338 986 3.39 5.2 

405 821 3.50 4.33 

7.5 (60 Hz) 1.59 267337 1.13 1106 FD.208-Z68-LA132SP4E 

1.91 222620 1.35 921 

2.30 184670 1.63 764 

2.54 167750 1.79 694 FD.208-Z88-LA132SP4E 

2.77 153731 1.96 636 

3.24 131251 2.29 543 

3.96 107563 2.80 445 

4.33 98136 3.07 406 

5.07 83875 3.59 347 

2.1 206425 0.86 854 FD.188B-Z68-LA132SP4E 

2.3 182253 0.97 754 

2.7 155423 1.14 643 

3.3 129559 1.37 536 

4.0 107322 1.65 444 

4.4 101958 1.74 403.86 FD.188B-LA132SP4E 

4.8 93541 1.89 370.52 

5.1 86326 2.05 341.94 

5.5 80075 2.21 317.18 

3.1 139228 0.89 576 FD.168B-Z68-LA132SP4E 

3.7 116023 1.07 480 

4.4 96203 1.29 398 

4.8 93223 1.33 369.26 FD.168B-LA132SP4E 

5.2 85455 1.45 338.49 

5.6 78797 1.57 312.12 

6.1 73026 1.70 289.26 

5 - 32 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

7.5 (60 Hz) 6.4 69434 1.78 275.03 FD.168B-LA132SP4E 

6.8 64892 1.91 257.04 

7.8 57242 2.16 226.74 

4.8 92920 0.86 368.06 FD.148B-LA132SP4E 

5.2 85096 0.94 337.07 

5.7 78391 1.02 310.51 

6.1 72579 1.10 287.49 

6.6 67495 1.18 267.35 

7.1 63008 1.26 249.58 

7.9 56376 1.41 223.31 

8.5 52241 1.52 206.93 

9.3 47889 1.66 189.69 

10.1 43900 1.81 173.89 

11.9 37409 2.13 148.18 

7.4 60183 0.90 238.39 FD.128B-LA132SP4E 

8.0 55326 0.98 219.15 

8.7 51118 1.06 202.48 

9.4 47432 1.14 187.88 

10.1 44183 1.22 175.01 

11.1 39944 1.35 158.22 

12.1 36773 1.47 145.66 

13.4 33075 1.63 131.01 

14.6 30515 1.77 120.87 

17.2 25854 2.09 102.41 

19.7 22532 2.40 89.25 

31 14547 2.62 56.42 FZ.128B-LA132SP4E 

13.8 32294 0.93 127.92 FD.108B-LA132SP4E 

14.9 29818 1.01 118.11 

16.6 26713 1.13 105.81 

18.0 24632 1.22 97.57 

22 20666 1.46 81.86 

25 17632 1.71 69.84 

30 14693 2.05 58.2 

36 12179 2.47 48.24 

27 16555 1.60 64.21 FZ.108B-LA132SP4E 

30 15160 1.75 58.8 

32 13967 2.15 54.17 

35 12930 2.33 50.15 

38 12025 2.50 46.64 

40 11226 2.68 43.54 

23 19449 0.86 77.04 FD.88B-LA132SP4E 

27 16518 1.02 65.43 

32 13751 1.22 54.47 

33 13562 1.24 52.6 FZ.88B-LA132SP4E 

37 12384 1.36 48.03 

40 11396 1.48 44.2 

43 10527 1.60 40.83 

46 9769 1.72 37.89 

50 9099 1.85 35.29 

55 8227 2.04 31.91 

60 7575 2.22 29.38 

67 6812 2.47 26.42 

72 6286 2.67 24.38 

85 5324 3.16 20.65 

98 4641 3.62 18 

5 - 33




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

7.5 (60 Hz) 45 10037 0.88 38.93 FZ.68B-LA132SP4E 

49 9264 0.96 35.93 

54 8379 1.06 32.5 

59 7717 1.15 29.93 

64 7137 1.24 27.68 

69 6624 1.34 25.69 

78 5845 1.51 22.67 

84 5396 1.64 20.93 

94 4834 1.83 18.75 

102 4458 1.98 17.29 

121 3741 2.37 14.51 

142 3192 2.77 12.38 

171 2658 3.33 10.31 

206 2204 4.01 8.55 

219 2070 3.83 8.03 

261 1738 4.25 6.74 

306 1483 4.51 5.75 

367 1235 4.89 4.79 

443 1024 5.09 3.97 

10 (60 Hz) 1.91 296826 1.01 921 FD.208-Z68-LA132ZMP4E 

2.30 246227 1.22 764 

2.54 223667 1.35 694 FD.208-Z88-LA132ZMP4E 

2.77 204974 1.47 636 

3.24 175002 1.72 543 

3.96 143418 2.10 445 

4.33 130848 2.30 406 

5.07 111834 2.69 347 

6.20 91529 3.29 284 

7.3 84063 3.58 242.01 FD.208-LA132ZMP4E 

8.1 75911 3.96 218.54 

2.7 207230 0.85 643 FD.188B-Z68-LA132ZMP4E 

3.3 172746 1.02 536 

4.0 143095 1.24 444 

4.4 135944 1.30 403.86 FD.188B-LA132ZMP4E 

4.8 124721 1.42 370.52 

5.1 115101 1.54 341.94 

5.5 106766 1.66 317.18 

5.9 100714 1.76 299.2 

6.3 94204 1.88 279.86 

7.1 83766 2.11 248.85 

7.5 79080 2.24 234.93 

4.4 128270 0.97 398 FD.168B-Z68-LA132ZMP4E 

4.8 124297 1.00 369.26 FD.168B-LA132ZMP4E 

5.2 113939 1.09 338.49 

5.6 105063 1.18 312.12 

6.1 97368 1.27 289.26 

6.4 92578 1.34 275.03 

6.8 86522 1.43 257.04 

7.8 76323 1.62 226.74 

8.2 71991 1.72 213.87 

9.2 64505 1.92 191.63 

9.9 59560 2.08 176.94 

6.6 89993 0.88 267.35 FD.148B-LA132ZMP4E 

7.1 84011 0.95 249.58 

7.9 75169 1.06 223.31 

5 - 34 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

10 (60 Hz) 8.5 69655 1.14 206.93 FD.148B-LA132ZMP4E 

9.3 63852 1.25 189.69 

10.1 58533 1.36 173.89 

11.9 49879 1.60 148.18 

13.5 44015 1.81 130.76 

15.8 37461 2.13 111.29 

18.3 32459 2.45 96.43 

26 23456 2.11 68.23 FZ.148B-LA132ZMP4E 

27 22129 2.60 64.37 

10.1 58910 0.92 175.01 FD.128B-LA132ZMP4E 

11.1 53259 1.01 158.22 

12.1 49031 1.10 145.66 

13.4 44099 1.22 131.01 

14.6 40686 1.33 120.87 

17.2 34472 1.57 102.41 

19.7 30043 1.80 89.25 

23 25559 2.11 75.93 

27 21812 2.47 64.8 

31 19396 1.96 56.42 FZ.128B-LA132ZMP4E 

34 17976 2.26 52.29 

35 17089 2.54 49.71 

18.0 32843 0.92 97.57 FD.108B-LA132ZMP4E 

22 27555 1.09 81.86 

25 23509 1.28 69.84 

30 19591 1.54 58.2 

36 16238 1.85 48.24 

27 22074 1.20 64.21 FZ.108B-LA132ZMP4E 

30 20214 1.31 58.8 

32 18622 1.62 54.17 

35 17240 1.74 50.15 

38 16034 1.88 46.64 

40 14968 2.01 43.54 

45 13390 2.25 38.95 

49 12410 2.42 36.1 

53 11375 2.64 33.09 

58 10427 2.89 30.33 

32 18335 0.92 54.47 FD.88B-LA132ZMP4E 

33 18082 0.93 52.6 FZ.88B-LA132ZMP4E 

37 16511 1.02 48.03 

40 15195 1.11 44.2 

43 14036 1.20 40.83 

46 13026 1.29 37.89 

50 12132 1.39 35.29 

55 10970 1.53 31.91 

60 10100 1.66 29.38 

67 9082 1.85 26.42 

72 8381 2.01 24.38 

85 7099 2.37 20.65 

98 6188 2.72 18 

115 5263 3.19 15.31 

135 4493 3.74 13.07 

59 10289 0.86 29.93 FZ.68B-LA132ZMP4E 

64 9516 0.93 27.68 

69 8832 1.00 25.69 

78 7793 1.14 22.67 

5 - 35




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

10 (60 Hz) 84 7195 1.23 20.93 FZ.68B-LA132ZMP4E 

94 6446 1.37 18.75 

102 5944 1.49 17.29 

121 4988 1.77 14.51 

142 4256 2.08 12.38 

171 3544 2.50 10.31 

206 2939 3.01 8.55 

219 2760 2.87 8.03 

261 2317 3.19 6.74 

306 1977 3.38 5.75 

367 1647 3.66 4.79 

443 1365 3.82 3.97 

12.3 (60 Hz) 2.51 277475 1.08 694 FD.208-Z88-LA132ZMP4 

2.74 254286 1.18 636 

3.21 217103 1.39 543 

3.92 177920 1.69 445 

4.30 162327 1.85 406 

5.03 138738 2.17 347 

6.14 113549 2.65 284 

7.21 104286 2.89 242.01 FD.208-LA132ZMP4 

7.98 94173 3.20 218.54 

8.52 88256 3.41 204.81 

9.92 75807 3.97 175.92 

3.3 214304 0.83 536 FD.188B-Z68-LA132ZMP4 

3.9 177520 1.00 444 

4.3 168648 1.05 403.86 FD.188B-LA132ZMP4 

4.7 154726 1.14 370.52 

5.1 142791 1.24 341.94 

5.5 132451 1.34 317.18 

5.8 124943 1.42 299.2 

6.2 116867 1.51 279.86 

7.0 103917 1.70 248.85 

7.4 98104 1.80 234.93 

8.3 88066 2.01 210.89 

9.0 80829 2.19 193.56 

5.2 141350 0.88 338.49 FD.168B-LA132ZMP4 

5.6 130338 0.95 312.12 

6.0 120792 1.03 289.26 

6.3 114850 1.08 275.03 

6.8 107337 1.15 257.04 

7.7 94684 1.31 226.74 

8.2 89310 1.39 213.87 

9.1 80023 1.55 191.63 

9.9 73888 1.68 176.94 

11.5 63131 1.96 151.18 

12.8 57055 2.17 136.63 

13.3 54972 2.25 131.64 

7.8 93252 0.85 223.31 FD.148B-LA132ZMP4 

8.4 86412 0.92 206.93 

9.2 79213 1.01 189.69 

10.0 72615 1.10 173.89 

11.8 61879 1.29 148.18 

13.3 54604 1.46 130.76 

15.7 46474 1.71 111.29 

18.1 40268 1.98 96.43 

5 - 36 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

12.3 (60 Hz) 22 33887 2.35 81.15 FD.148B-LA132ZMP4 

24 30576 2.60 73.22 

26 29098 1.70 68.23 FZ.148B-LA132ZMP4 

27 27452 2.09 64.37 

29 25678 2.41 60.21 

12.0 60826 0.89 145.66 FD.128B-LA132ZMP4 

13.3 54709 0.99 131.01 

14.4 50474 1.07 120.87 

17.0 42765 1.26 102.41 

19.6 37270 1.45 89.25 

23 31708 1.70 75.93 

27 27060 1.99 64.8 

33 22187 2.43 53.13 

31 24062 1.58 56.42 FZ.128B-LA132ZMP4 

33 22300 1.83 52.29 

35 21200 2.05 49.71 

38 19814 2.30 46.46 

21 34184 0.88 81.86 FD.108B-LA132ZMP4 

25 29165 1.03 69.84 

30 24304 1.24 58.2 

36 20145 1.49 48.24 

27 27384 0.97 64.21 FZ.108B-LA132ZMP4 

30 25077 1.06 58.8 

32 23102 1.30 54.17 

35 21388 1.41 50.15 

37 19891 1.51 46.64 

40 18569 1.62 43.54 

45 16611 1.81 38.95 

48 15396 1.95 36.1 

53 14112 2.13 33.09 

58 12935 2.33 30.33 

68 11024 2.73 25.85 

77 9728 3.09 22.81 

39 18850 0.89 44.2 FZ.88B-LA132ZMP4 

43 17413 0.97 40.83 

46 16159 1.04 37.89 

49 15050 1.12 35.29 

55 13609 1.24 31.91 

59 12530 1.34 29.38 

66 11267 1.49 26.42 

72 10397 1.62 24.38 

85 8807 1.91 20.65 

97 7677 2.19 18 

114 6529 2.57 15.31 

134 5574 3.02 13.07 

163 4568 3.68 10.71 

190 3919 3.74 9.19 

218 3416 4.01 8.01 

256 2909 4.42 6.82 

300 2482 4.81 5.82 

366 2034 5.21 4.77 

77 9668 0.92 22.67 FZ.68B-LA132ZMP4 

83 8926 0.99 20.93 

93 7996 1.11 18.75 

101 7374 1.20 17.29 

5 - 37




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

12.3 (60 Hz) 120 6188 1.43 14.51 FZ.68B-LA132ZMP4 

141 5280 1.68 12.38 

169 4397 2.01 10.31 

204 3646 2.43 8.55 

217 3425 2.32 8.03 

259 2874 2.57 6.74 

303 2452 2.72 5.75 

364 2043 2.95 4.79 

440 1693 3.08 3.97 

15 (60 Hz) 3.25 261759 1.15 543 FD.208-Z88-LA160MP4E 

3.97 214517 1.40 445 

4.35 195717 1.54 406 

5.09 167275 1.80 347 

6.21 136905 2.20 284 

7.3 125737 2.39 242.01 FD.208-LA160MP4E 

8.1 113543 2.65 218.54 

8.6 106410 2.83 204.81 

10.03 91400 3.29 175.92 

11.61 78967 3.81 151.99 

4.0 214035 0.83 444 FD.188B-Z68-LA160MP4E 

5.9 150643 1.17 299.2 FD.188B-LA160MP4E 

6.3 140906 1.26 279.86 

7.1 125292 1.41 248.85 

7.5 118284 1.50 234.93 

8.4 106180 1.67 210.89 FD.188B-LA160MP4E 

9.1 97455 1.82 193.56 

10.6 84097 2.10 167.03 

6.4 138474 0.89 275.03 FD.168B-LA160MP4E 

6.9 129416 0.96 257.04 

7.8 114160 1.09 226.74 

8.3 107681 1.15 213.87 

9.2 96483 1.28 191.63 

10.0 89087 1.39 176.94 

11.7 76117 1.63 151.18 

12.9 68791 1.80 136.63 

13.4 66279 1.87 131.64 

15.5 57327 2.16 113.86 

17.8 50001 2.48 99.31 

10.2 87551 0.91 173.89 FD.148B-LA160MP4E 

11.9 74607 1.07 148.18 

13.5 65836 1.21 130.76 

15.9 56033 1.42 111.29 

18.3 48551 1.64 96.43 

22 40858 1.95 81.15 

24 36865 2.16 73.22 

28 31684 2.51 62.93 

27 33099 1.74 64.37 FZ.148B-LA160MP4E 

29 30960 2.00 60.21 

33 27525 2.57 53.53 

35 25988 2.72 50.54 

14.6 60856 0.89 120.87 FD.128B-LA160MP4E 

17.2 51562 1.05 102.41 

19.8 44936 1.20 89.25 

23 38230 1.41 75.93 

27 32626 1.65 64.8 

5 - 38 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

15 (60 Hz) 33 26750 2.02 53.13 FD.128B-LA160MP4E 

36 25561 1.70 49.71 FZ.128B-LA160MP4E 

38 23890 1.91 46.46 

43 21077 2.39 40.99 

46 19879 2.67 38.66 

25 35163 0.86 69.84 FD.108B-LA160MP4E 

30 29303 1.03 58.2 

37 24288 1.24 48.24 

38 23982 1.25 46.64 FZ.108B-LA160MP4E 

41 22388 1.34 43.54 

45 20028 1.50 38.95 

49 18563 1.62 36.1 

53 17015 1.77 33.09 

58 15596 1.93 30.33 

68 13292 2.26 25.85 

77 11729 2.56 22.81 

91 9981 3.01 19.41 

1 105 8649 3.48 16.82 FZ.108B-LA160MP4E 

47 19483 0.86 37.89 FZ.88B-LA160MP4E 

50 18146 0.93 35.29 

55 16408 1.02 31.91 

60 15107 1.11 29.38 

67 13585 1.24 26.42 

72 12536 1.34 24.38 

85 10618 1.58 20.65 

98 9256 1.82 18 

115 7872 2.14 15.31 

135 6721 2.50 13.07 

165 5507 3.05 10.71 

192 4725 3.10 9.19 

220 4119 3.33 8.01 

259 3507 3.67 6.82 

303 2993 3.99 5.82 

370 2453 4.32 4.77 

20 (60 Hz) 3.97 286023 1.05 445 FD.208-Z88-LA160ZLP4E 

4.35 260956 1.15 406 

5.09 223034 1.35 347 

6.21 182540 1.65 284 

7.3 167650 1.79 242.01 FD.208-LA160ZLP4E 

8.1 151391 1.99 218.54 

8.6 141880 2.12 204.81 

10.0 121867 2.47 175.92 

11.6 105289 2.86 151.99 

13.2 92938 3.24 134.16 

14.6 83662 3.60 120.77 

5.9 200857 0.88 299.2 FD.188B-LA160ZLP4E 

6.3 187874 0.94 279.86 

7.1 167057 1.06 248.85 

7.5 157712 1.12 234.93 

8.4 141574 1.25 210.89 

9.1 129940 1.36 193.56 

10.6 112130 1.58 167.03 

12.1 98086 1.80 146.11 

13.9 85304 2.07 127.07 

15.8 74845 2.36 111.49 

5 - 39




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

20 (60 Hz) 9.2 128644 0.96 191.63 FD.168B-LA160ZLP4E 

10.0 118782 1.04 176.94 

11.7 101489 1.22 151.18 

12.9 91722 1.35 136.63 

13.4 88372 1.40 131.64 

15.5 76436 1.62 113.86 

17.8 66668 1.86 99.31 

21 57055 2.17 84.99 

23 51100 2.42 76.12 

33 36666 2.17 53.48 FZ.168B-LA160ZLP4E 

37 33108 2.81 48.29 

13.5 87781 0.91 130.76 FD.148B-LA160ZLP4E 

15.9 74711 1.07 111.29 

18.3 64735 1.23 96.43 

22 54477 1.46 81.15 

24 49154 1.62 73.22 

28 42246 1.88 62.93 

27 44132 1.30 64.37 FZ.148B-LA160ZLP4E 

29 41280 1.50 60.21 

33 36700 1.93 53.53 

35 34650 2.04 50.54 

39 31106 2.47 45.37 

42 28548 2.79 41.64 

20 59915 0.90 89.25 FD.128B-LA160ZLP4E 

23 50973 1.06 75.93 

27 43501 1.24 64.8 

33 35667 1.51 53.13 

36 34081 1.27 49.71 FZ.128B-LA160ZLP4E 

38 31853 1.43 46.46 

43 28103 1.79 40.99 

46 26505 2.00 38.66 

51 23749 2.27 34.64 

55 21925 2.46 31.98 

65 18737 2.88 27.33 

71 16934 3.19 24.7 

74 16317 3.31 23.8 FZ.128B-LA160ZLP4E 

37 32384 0.93 48.24 FD.108B-LA160ZLP4E 

38 31976 0.94 46.64 FZ.108B-LA160ZLP4E 

41 29851 1.01 43.54 

45 26704 1.13 38.95 

49 24750 1.22 36.1 

53 22686 1.33 33.09 

58 20794 1.45 30.33 

68 17723 1.70 25.85 

77 15638 1.92 22.81 

91 13307 2.26 19.41 

105 11532 2.61 16.82 

125 9708 3.01 14.16 

138 8755 3.28 12.77 

161 7528 3.71 10.98 

176 6883 4.34 10.04 

203 5965 4.60 8.7 

67 18113 0.93 26.42 FZ.188B-LA160ZLP4E 

72 16715 1.01 24.38 

85 14158 1.19 20.65 

5 - 40 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

20 (60 Hz) 98 12341 1.36 18 FZ.188B-LA160ZLP4E 

115 10497 1.60 15.31 

135 8961 1.88 13.07 

165 7343 2.29 10.71 

192 6301 2.33 9.19 

220 5492 2.49 8.01 

259 4676 2.75 6.82 

303 3990 2.99 5.82 

370 3270 3.24 4.77 

25 (60 Hz) 5.10 278004 1.08 347 FD.208-Z88-LG180ZMB4E 

6.23 227531 1.32 284 

7.3 208970 1.44 242.01 FD.208-LG180ZMB4E 

8.1 188705 1.59 218.54 

8.6 176849 1.70 204.81 

10.1 151903 1.98 175.92 

11.6 131240 2.29 151.99 

13.2 115844 2.60 134.16 

14.7 104282 2.89 120.77 

17.7 86529 3.48 100.21 

19.4 78905 3.81 91.38 

7.5 197140 0.90 234.93 FD.188B-LG180ZMB4E 

8.4 176967 1.00 210.89 

9.1 162425 1.09 193.56 

10.6 140162 1.26 167.03 

12.1 122607 1.44 146.11 

13.9 106630 1.66 127.07 

15.8 93556 1.89 111.49 

18.7 79114 2.24 94.28 

21 71780 2.47 85.54 

11.7 126862 0.98 151.18 FD.168B-LG180ZMB4E 

12.9 114652 1.08 136.63 

13.4 110465 1.12 131.64 

15.5 95545 1.30 113.86 

17.8 83335 1.49 99.31 

21 71319 1.74 84.99 

23 63876 1.94 76.12 

27 54100 2.29 64.47 

32 46723 2.65 55.68 

33 45832 1.74 53.48 FZ.168B-LG180ZMB4E 

37 41384 2.24 48.29 

39 38779 2.62 45.25 

18.3 80919 0.98 96.43 FD.148B-LG180ZMB4E 

22 68096 1.17 81.15 

24 61442 1.30 73.22 

28 52807 1.51 62.93 

33 45875 1.54 53.53 FZ.148B-LG180ZMB4E 

35 43313 1.63 50.54 FZ.148B-LG180ZMB4E 

39 38882 1.98 45.37 

42 35685 2.23 41.64 

49 30792 2.59 35.93 

56 26935 2.96 31.43 

27 54376 0.99 64.8 FD.128B-LG180ZMB4E 

33 44584 1.21 53.13 

43 35128 1.44 40.99 FZ.128B-LG180ZMB4E 

46 33132 1.60 38.66 

5 - 41




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

25 (60 Hz) 51 29686 1.82 34.64 FZ.128B-LG180ZMB4E 

55 27407 1.97 31.98 

65 23422 2.30 27.33 

71 21168 2.55 24.7 

74 20397 2.65 23.8 

86 17637 3.06 20.58 

98 15383 3.51 17.95 

45 33380 0.90 38.95 FZ.108B-M180ZMB4E 

49 30938 0.97 36.1 

53 28358 1.06 33.09 

58 25993 1.16 30.33 

68 22153 1.36 25.85 

77 19548 1.54 22.81 

91 16634 1.81 19.41 

105 14415 2.09 16.82 

125 12135 2.41 14.16 

138 10944 2.63 12.77 

161 9410 2.96 10.98 

176 8604 3.47 10.04 

203 7456 3.68 8.7 

241 6273 4.02 7.32 

267 5656 4.15 6.6 

311 4868 4.40 5.68 

30 (60 Hz) 6.23 273037 1.10 284 FD.208-Z88-LG180ZLB4E 

7.3 250764 1.20 242.01 FD.208-LG180ZLB4E 

8.1 226445 1.33 218.54 

8.6 212219 1.42 204.81 

10.1 182284 1.65 175.92 

11.6 157488 1.91 151.99 

13.2 139013 2.16 134.16 

14.7 125139 2.40 120.77 

17.7 103885 2.90 100.21 

19.4 94686 3.18 91.38 

22 83070 3.62 80.17 

9.1 194359 0.91 193.56 FD.188B-LG180ZLB4E 

10.6 167719 1.06 167.03 

12.1 146713 1.21 146.11 

13.9 127594 1.39 127.07 

15.9 111950 1.58 111.49 

18.8 94669 1.87 94.28 

21 85893 2.06 85.54 

24 74888 2.36 74.58 

34 53972 2.72 52.63 FZ.188B-LG180ZLB4E 

13.0 137194 0.90 136.63 FD.168B-LG180ZLB4E 

13.4 132183 0.94 131.64 

15.5 114330 1.08 113.86 

17.8 99720 1.24 99.31 

21 85341 1.45 84.99 

23 76434 1.62 76.12 

27 64736 1.91 64.47 

32 55910 2.22 55.68 

33 54843 1.45 53.48 FZ.168B-LG180ZLB4E 

37 49521 1.88 48.29 

39 46403 2.19 45.25 

46 39861 2.89 38.87 

5 - 42 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

30 (60 Hz) 22 81485 0.98 81.15 FD.148B-LG180ZLB4E 

24 73522 1.08 73.22 

28 63190 1.26 62.93 FD.148B-LG180ZLB4E 

33 54895 1.29 53.53 FZ.148B-LG180ZLB4E 

35 51828 1.37 50.54 

39 46527 1.65 45.37 

43 42701 1.86 41.64 

49 36846 2.16 35.93 

56 32231 2.47 31.43 

65 28037 2.84 27.34 

74 24591 3.24 23.98 

33 53349 1.01 53.13 FD.128B-LG180ZLB4E 

43 42035 1.20 40.99 FZ.128B-LG180ZLB4E 

46 39646 1.34 38.66 

51 35523 1.52 34.64 

55 32795 1.65 31.98 

65 28027 1.93 27.33 

72 25330 2.13 24.7 

74 24407 2.21 23.8 

86 21105 2.56 20.58 

99 18408 2.93 17.95 

115 15752 3.28 15.36 

129 14111 3.54 13.76 

152 11947 3.96 11.65 

176 10327 4.38 10.07 

256 7086 5.70 6.91 

303 5999 5.30 5.85 

350 5179 5.64 5.05 

53 33934 0.89 33.09 FZ.108B-LG180ZLB4E 

58 31103 0.97 30.33 

68 26509 1.13 25.85 

78 23391 1.29 22.81 

91 19905 1.51 19.41 

105 17249 1.74 16.82 

125 14521 2.01 14.16 

139 13096 2.20 12.77 

161 11260 2.48 10.98 

176 10296 2.90 10.04 

203 8922 3.08 8.7 

242 7507 3.36 7.32 

268 6768 3.47 6.6 

312 5825 3.68 5.68 

40 (60 Hz) 7.3 334353 0.90 242.01 FD.208-LG200LB4E 

8.1 301927 1.00 218.54 

8.6 282958 1.06 204.81 

10.1 243045 1.24 175.92 

11.6 209984 1.43 151.99 

13.2 185351 1.62 134.16 

14.7 166852 1.80 120.77 

17.7 138447 2.17 100.21 

19.4 126247 2.38 91.38 

22 110760 2.72 80.17 

26 95190 3.16 68.90 

12.1 195617 0.90 146.11 FD.188B-LG200LB4E 

13.9 170126 1.04 127.07 

5 - 43




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

40 (60 Hz) 15.9 149267 1.19 111.49 FD.188B-LG200LB4E 

18.8 126225 1.40 94.28 

21 114524 1.55 85.54 

24 99850 1.77 74.58 

28 84775 2.09 63.32 

37 64880 2.73 48.46 

34 71962 2.04 52.63 FZ.188B-LG200LB4E 

37 66274 2.25 48.47 

42 57523 2.69 42.07 

17.8 132960 0.93 99.31 FD.168B-LG200LB4E 

21 113788 1.09 84.99 

23 101912 1.22 76.12 

27 86315 1.44 64.47 

32 74546 1.66 55.68 FD.168B-LG200LB4E 

42 56030 2.21 41.85 

33 73124 1.09 53.48 FZ.168B-LG200LB4E 

37 66028 1.41 48.29 

39 61871 1.64 45.25 

46 53148 2.16 38.87 

53 45915 2.51 33.58 

60 40527 3.06 29.64 

28 84253 0.95 62.93 FD.148B-LG200LB4E 

33 73193 0.97 53.53 FZ.148B-LG200LB4E 

35 69104 1.02 50.54 

39 62035 1.24 45.37 

43 56935 1.40 41.64 

49 49128 1.62 35.93 

56 42975 1.85 31.43 

65 37383 2.13 27.34 

74 32788 2.43 23.98 

87 27729 2.87 20.28 

96 25159 3.17 18.4 

110 21932 3.63 16.04 

186 13003 5.80 9.51 

43 56047 0.90 40.99 FZ.128B-LG200LB4E 

46 52861 1.00 38.66 

51 47364 1.14 34.64 

55 43727 1.23 31.98 

65 37369 1.44 27.33 

72 33773 1.60 24.7 

74 32542 1.66 23.8 

86 28139 1.92 20.58 

99 24543 2.20 17.95 

115 21002 2.46 15.36 

129 18814 2.65 13.76 

152 15929 2.97 11.65 

176 13769 3.29 10.07 

234 10351 3.90 7.57 

256 9448 3.36 6.91 

303 7999 3.65 5.85 

350 6905 4.02 5.05 

466 5196 4.61 3.8 

50 (60 Hz) 8.7 350726 0.86 204.81 FD.208-LG225S4E 

10.1 301253 1.00 175.92 

11.7 260274 1.16 151.99 

5 - 44 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

50 (60 Hz) 13.3 229741 1.31 134.16 FD.208-LG225S4E 

14.8 206812 1.45 120.77 

17.8 171604 1.75 100.21 

20 156483 1.92 91.38 

22 137287 2.19 80.17 

26 117987 2.55 68.90 

33 91890 3.27 53.66 

14.0 210870 0.84 127.07 FD.188B-LG225S4E 

16.0 185016 0.96 111.49 

18.9 156456 1.13 94.28 

21 141952 1.25 85.54 

24 123764 1.43 74.58 

28 105078 1.68 63.32 

37 80418 2.20 48.46 

34 89197 1.64 52.63 FZ.188B-LG225S4E 

37 82146 1.82 48.47 

42 71300 2.17 42.07 

48 62843 2.47 37.08 

55 55148 2.98 32.54 

21 141039 0.88 84.99 FD.168B-LG225S4E 

23 126320 0.98 76.12 

28 106987 1.16 64.47 

32 92400 1.34 55.68 

43 69449 1.78 41.85 

37 81841 1.14 48.29 FZ.168B-LG225S4E 

39 76689 1.33 45.25 

46 65876 1.75 38.87 

53 56911 2.02 33.58 

60 50234 2.47 29.64 

67 45217 2.74 26.68 

81 37523 3.30 22.14 

39 76893 1.00 45.37 FZ.148B-LG225S4E 

43 70571 1.13 41.64 

50 60894 1.31 35.93 

57 53267 1.49 31.43 

65 46336 1.72 27.34 

74 40641 1.96 23.98 

88 34370 2.32 20.28 

97 31184 2.55 18.4 

111 27184 2.93 16.04 

131 23083 3.27 13.62 

171 17677 3.92 10.43 

188 16117 3.61 9.51 

215 14050 3.91 8.29 

254 11931 4.32 7.04 

331 9135 4.96 5.39 

52 58708 0.92 34.64 FZ.128B-K4-LGI225S4E 

56 54199 1.00 31.98 

65 46319 1.17 27.33 

72 41861 1.29 24.7 

75 40336 1.34 23.8 

87 34879 1.55 20.58 

99 30421 1.77 17.95 

116 26032 1.99 15.36 

130 23320 2.14 13.76 

5 - 45




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

50 (60 Hz) 153 19744 2.40 11.65 FZ.128B-K4-LGI225S4E 

177 17067 2.65 10.07 

236 12830 3.15 7.57 

258 11711 2.71 6.91 

305 9915 2.95 5.85 

353 8559 3.24 5.05 

470 6440 3.72 3.8 

60 (60 Hz) 11.7 312329 0.96 151.99 FD.208-LG225ZM4E 

13.3 275690 1.09 134.16 

14.8 248174 1.21 120.77 

17.8 205925 1.46 100.21 

19.5 187780 1.60 91.38 

22 164744 1.83 80.17 

26 141585 2.13 68.90 

33 110268 2.73 53.66 

42 87602 3.43 42.63 

46 79814 3.77 38.84 

18.9 187747 0.94 94.28 FD.188B-LG225ZM4E 

21 170342 1.04 85.54 

24 148517 1.19 74.58 

28 126094 1.40 63.32 

37 96502 1.83 48.46 

34 107036 1.37 52.63 FZ.188B-LG225ZM4E 

37 98576 1.51 48.47 

42 85560 1.81 42.07 

48 75411 2.05 37.08 

55 66178 2.48 32.54 

61 59650 2.97 29.33 

28 128384 0.96 64.47 FD.168B-LG225ZM4E 

32 110880 1.12 55.68 

43 83339 1.49 41.85 

37 98210 0.95 48.29 FZ.168B-LG225ZM4E 

39 92027 1.11 45.25 

46 79052 1.46 38.87 FZ.168B-LG225ZM4E 

53 68293 1.68 33.58 

60 60280 2.05 29.64 

67 54260 2.28 26.68 

81 45027 2.75 22.14 

88 41061 3.02 20.19 

101 36018 3.44 17.71 

39 92271 0.83 45.37 FZ.148B-LG225ZM4E 

43 84685 0.94 41.64 

50 73073 1.09 35.93 

57 63921 1.25 31.43 

65 55603 1.43 27.34 

74 48769 1.63 23.98 

88 41244 1.93 20.28 

97 37421 2.13 18.4 

111 32621 2.44 16.04 

131 27700 2.72 13.62 

171 21212 3.26 10.43 

188 19341 3.01 9.51 

215 16860 3.26 8.29 

254 14318 3.60 7.04 

331 10962 4.14 5.39 

5 - 46 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

60 (60 Hz) 65 55582 0.97 27.33 FZ.128B-K4-LGI225ZM4E 

72 50234 1.07 24.7 

75 48403 1.12 23.8 

87 41855 1.29 20.58 

99 36506 1.48 17.95 

116 31238 1.66 15.36 

130 27984 1.78 13.76 

153 23693 2.00 11.65 

177 20480 2.21 10.07 

236 15395 2.62 7.57 

258 14053 2.26 6.91 

305 11897 2.45 5.85 

353 10270 2.70 5.05 

470 7728 3.10 3.8 

75 (60 Hz) 14.8 310218 0.97 120.77 FD.208-LG225YMB4E 

17.8 257406 1.17 100.21 

19.5 234725 1.28 91.38 

22 205930 1.46 80.17 

26 176981 1.70 68.90 

33 137835 2.18 53.66 

42 109502 2.75 42.63 

46 99767 3.02 38.84 

59 77702 3.65 30.25 

21 212928 0.83 85.54 FD.188B-LG225YMB4E 

24 185646 0.95 74.58 

28 157618 1.12 63.32 

37 120628 1.47 48.46 

37 123220 1.21 48.47 FZ.188B-LG225YMB4E 

42 106950 1.45 42.07 

48 94264 1.64 37.08 

55 82723 1.98 32.54 

61 74562 2.37 29.33 

72 63300 2.80 24.9 

77 58801 3.01 23.13 

90 50513 3.47 19.87 

32 138600 0.89 55.68 FD.168B-LG225YMB4E 

43 104174 1.19 41.85 

39 115034 0.88 45.25 FZ.168B-LG225YMB4E 

46 98815 1.16 38.87 

53 85367 1.35 33.58 

60 75350 1.64 29.64 

67 67825 1.83 26.68 

81 56284 2.20 22.14 FZ.168B-LG225YMB4E 

88 51327 2.41 20.19 

101 45022 2.75 17.71 

117 38692 3.20 15.22 

151 30150 3.84 11.86 

209 21710 4.95 8.54 

50 91341 0.87 35.93 FZ.148B-K4-LGI225YMB4E 

57 79901 1.00 31.43 

65 69503 1.15 27.34 

74 60962 1.31 23.98 

88 51556 1.54 20.28 

97 46776 1.70 18.4 

111 40777 1.95 16.04 

5 - 47




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

75 (60 Hz) 131 34625 2.18 13.62 

171 26515 2.61 10.43 

188 24176 2.41 9.51 

215 21075 2.60 8.29 

254 17897 2.88 7.04 

331 13702 3.31 5.39 

100 (60 Hz) 19.6 312441 0.96 91.38 FD.208-LG250ZMB4E 

22 274113 1.10 80.17 

26 235579 1.28 68.90 

33 183471 1.64 53.66 

42 145758 2.06 42.63 

46 132789 2.27 38.84 

59 103429 2.74 30.25 

74 82162 3.22 24.03 

89 69295 4.17 20.06 FZ.208-LG250ZMB4E 

37 160567 1.10 48.46 FD.188B-LG250ZMB4E 

48 125475 1.23 37.08 FZ.188B-LG250ZMB4E 

55 110112 1.49 32.54 

61 99250 1.78 29.33 

72 84259 2.10 24.9 

77 78269 2.26 23.13 

90 67238 2.60 19.87 

105 57357 2.91 16.95 

134 45175 3.44 13.35 

166 36343 3.91 10.74 

191 31606 4.20 9.34 

214 28222 4.45 8.34 

53 113631 1.01 33.58 FZ.168B-LG250ZMB4E 

60 100299 1.24 29.64 

67 90282 1.37 26.68 

81 74919 1.65 22.14 

89 68321 1.81 20.19 

101 59929 2.07 17.71 

117 51503 2.41 15.22 

151 40133 2.88 11.86 

190 31876 3.37 9.42 

209 28898 3.45 8.54 

269 22503 3.94 6.65 

339 17867 4.30 5.28 

125 (60 Hz) 26 294145 1.02 68.90 FD.208-LGI280ZM4E 

33 229083 1.31 53.66 

42 181994 1.65 42.63 

46 165814 1.81 38.84 

59 129142 2.20 30.25 

74 102588 2.58 24.03 

89 86522 3.34 20.06 FZ.208-LGI280ZM4E 

112 69097 3.90 16.02 

137 56459 4.49 13.09 

37 192465 0.92 48.46 FD.188B-K4-LGI280ZM4E 

48 150401 1.03 37.08 FZ.188B-K4-LGI280ZM4E 

55 131987 1.24 32.54 

61 118966 1.49 29.33 

72 100998 1.75 24.9 

77 93818 1.89 23.13 

90 80595 2.17 19.87 

5 - 48 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

125 (60 Hz) 106 68751 2.43 16.95 FZ.188B-K4-LGI280ZM4E 

134 54149 2.87 13.35 

167 43563 3.26 10.74 

192 37884 3.50 9.34 

215 33828 3.71 8.34 

53 136205 0.84 33.58 FZ.168B-K4-LGI280ZM4E 

60 120224 1.03 29.64 

67 108218 1.14 26.68 

81 89803 1.38 22.14 

89 81893 1.51 20.19 

101 71834 1.72 17.71 

118 61734 2.01 15.22 

151 48106 2.41 11.86 

190 38209 2.81 9.42 

210 34639 2.88 8.54 

269 26973 3.28 6.65 

339 21416 3.59 5.28 

5 - 49





on request 

on request 

63 • • 

56C 71 • • • • • • • 

80 • • • • • • • 

140TC 90 • • • • • • • • • 

180TC 100 • • • • • • • • • 

112 • • • • • • • 

210TC 132 • • • • • • • • • 

250TC 160 • • • • • • • • • 

180 • • • • 

280TC 200 • • • • • • • • • 

320TC 225 • • • • • • • • • 

360TC 250 • • • • • • • • • 

280 • • • • 

315 • 






56C 71 26.5 3 5/8 16 1.575 40 54 240 

80 44.2 5 3/4 19 1.575 40 54 240 

140TC 90 88.5 10 7/8 24 1.968 50 139 620 

180TC 100 177 20 1 1/8 28 2.362 60 189 840 

112 230 26 1 1/4 28 2.362 60 225 1000 

210TC 132 540 61 1 3/8 38 3.150 80 382 1700 

250TC 160 867 98 1 5/8 42 4.331 110 405 1800 

180 1752 198 - - - - - - 

280TC 200 1752 198 2 1/8 55 4.331 110 674 3000 

320TC 225 2575 291 2 1/8 60 5.512 140 776 3450 

360TC 250 3150 356 2 3/8 65 5.512 140 877 3900 

280 5132 580 - 70 - 140 1158 5150 

315 11414 1290 - - - - - 


5 - 50 

F 

F RAperm V1/2 

0 

F RAperm V1/2 

∅FU1 

0 V1/2 V1 x 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Torque tables 





T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 

Gear Type Ratio n 2 (60 Hz) T 2 T 2 Size 

FD.28 

1327 lb in 

FZ.28 

1327 lb in 


[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

280.00 6.2 1327 150 • 

241.56 7.2 1327 150 • • 

207.53 8.4 1327 150 • • 

191.06 9.1 1327 150 • • • 

173.69 10.0 1327 150 • • • 

153.74 11.3 1327 150 • • • 

128.77 13.5 1327 150 • • • 

109.79 15.9 1327 150 • • • 

93.32 18.7 1327 150 • • • 

81.10 21.5 1327 150 • • • 

70.59 25.0 1327 150 • • • 

63.68 27.0 1327 150 • • • 

56.20 31.0 1327 150 • • • 

59.65 29 1327 150 • 

50.30 35 1327 150 • • 

44.66 39 1327 150 • • 

39.15 44 1327 150 • • • 

35.04 50 1327 150 • • • 

31.10 56 1327 150 • • • 

27.25 64 1327 150 • • • 

23.96 73 1327 150 • • • 

21.64 80 1327 150 • • • • 

18.86 92 1327 150 • • • 

16.94 103 1327 150 • • • 

15.29 114 1327 150 • • • • 

13.87 125 1327 150 • • • • 

12.62 138 1309 148 • • • • 

11.16 156 1256 142 • • • • 

10.30 169 1221 138 • • • • 

8.87 196 1159 131 • • • • 

8.06 216 1123 127 • • • • 

7.20 242 1114 126 • • • • 

6.53 267 1079 122 • • • • 

5.94 293 1044 118 • • • • 

5.25 331 982 111 • • • • 

4.85 359 973 110 • • • • 

4.18 417 875 99 • • • • 

3.80 461 850 96 • • • • 

5 - 51




Gear Type 

FZ.38B-D28 

2565 lb in 

FZ.38B-Z28 

2565 lb in 


5 - 52 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

7591 0.22 2565 290 • 

6548 0.26 2565 290 • • 

5626 0.30 2565 290 • • 

5179 0.32 2565 290 • • • 

4709 0.38 2565 290 • • • 

4168 0.40 2565 290 • • • 

3491 0.48 2565 290 • • • 

2976 0.56 2565 290 • • • 

2530 0.66 2565 290 • • • 

2199 0.76 2565 290 • • • 

1914 0.88 2565 290 • • • 

1726 0.97 2565 290 • • • 

1617 1.0 2565 290 • 

1364 1.2 2565 290 • • 

1211 1.4 2565 290 • • 

1061 1.6 2565 290 • • • 

950 1.8 2565 290 • • • 

843 2.0 2565 290 • • • 

739 2.3 2565 290 • • • 

650 2.6 2565 290 • • • 

587 2.9 2565 290 • • • • 

511 3.3 2565 290 • • • 

459 3.7 2565 290 • • • 

415 4.1 2565 290 • • • • 

376 4.5 2565 290 • • • • 

342 4.9 2565 290 • • • • 

303 5.6 2565 290 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752198 / 1752 


Gear Type (4 pol.) (SF=1) (SF=1) 56C 140TC 180TC 210TC 250TC 280TC 

FD.38B 

2565 lb in 

FZ.38B 

2565 lb in 

[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

280.41 6.2 2565 290 • • 

241.91 7.2 2565 290 • • • 

207.83 8.4 2565 290 • • • 

191.34 9.1 2565 290 • • • • 

173.94 10.1 2565 290 • • • • 

153.96 11.4 2565 290 • • • • 

128.95 13.6 2565 290 • • • • 

109.95 15.9 2565 290 • • • • 

93.46 18.7 2565 290 • • • • 

81.22 22.0 2565 290 • • • • 

70.70 25.0 2565 290 • • • • 

63.77 27.0 2565 290 • • • • 

56.28 31.0 2565 290 • • • • 

56.72 31 1858 210 • • • 

50.44 35 2035 230 • • • 

43.75 40 2212 250 • • • • 

40.88 43 2433 275 • • • • 

35.96 49 2565 290 • • • • 

31.49 56 2565 290 • • • • • 

27.85 63 2565 290 • • • • • 

25.24 69 2565 290 • • • • • 

22.28 79 2565 290 • • • • • 

20.10 87 2565 290 • • • • • 

18.23 96 2565 290 • • • • • 

16.61 105 2565 290 • • • • • 

15.19 115 2565 290 • • • • • 

13.58 129 2565 290 • • • • • 

12.47 140 2565 290 • • • • • 

11.24 156 2565 290 • • • • • 

9.67 181 2565 290 • • • • • 

8.52 205 2565 290 • • • • • 

7.76 226 2565 290 • • • • • 

7.10 246 2565 290 • • • • • 

6.35 276 2433 275 • • • • • 

5.83 300 2433 275 • • • • • 

5.25 333 2238 253 • • • • • 

4.52 387 2017 228 • • • • • 

5 - 53




Gear Type 

FD.48B-D28 

4777 lb in 

FD.48B-Z28 

4777 lb in 


5 - 54 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

19701 0.09 4777 540 • 

16996 0.10 4777 540 • • 

14602 0.12 4777 540 • • 

13443 0.13 4777 540 • • • 

12221 0.14 4777 540 • • • 

10817 0.16 4777 540 • • • 

9060 0.19 4777 540 • • • 

7725 0.22 4777 540 • • • 

6566 0.26 4777 540 • • • 

5706 0.29 4777 540 • • • 

4967 0.34 4777 540 • • • 

4480 0.38 4777 540 • • • 

4197 0.40 4777 540 • 

3539 0.48 4777 540 • • 

3142 0.54 4777 540 • • 

2755 0.61 4777 540 • • • 

2465 0.68 4777 540 • • • 

2188 0.77 4777 540 • • • 

1918 0.88 4777 540 • • • 

1686 1.00 4777 540 • • • 

1523 1.10 4777 540 • • • • 

1327 1.30 4777 540 • • • 

1192 1.40 4777 540 • • • 

1076 1.60 4777 540 • • • • 

976 1.70 4777 540 • • • • 

888 1.90 4777 540 • • • • 

785 2.10 4777 540 • • • • 

725 2.30 4777 540 • • • • 

624 2.70 4777 540 • • • • 

567 3.00 4777 540 • • • • 

516 3.30 4777 540 • • • • 

468 3.60 4777 540 • • • • 

426 3.90 4777 540 • • • • 

376 4.50 4777 540 • • • • 

347 4.80 4777 540 • • • • 

299 5.60 4777 540 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 



FD.48B 

4777 lb in 

FZ.48B 

4777 lb in 

[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

268.8 6.5 4777 540 • • • 

238.65 7.3 4777 540 • • • 

209.23 8.4 4777 540 • • • • 

187.24 9.3 4777 540 • • • • 

166.19 10.5 4777 540 • • • • 

145.63 12.0 4777 540 • • • • 

128.04 13.7 4777 540 • • • • 

115.68 15.1 4777 540 • • • • 

100.80 17.4 4777 540 • • • • 

90.53 19.3 4777 540 • • • • 

81.73 21.0 4777 540 • • • • • 

74.10 24.0 4777 540 • • • • • 

67.43 26.0 4777 540 • • • • • 

59.62 29.0 4777 540 • • • • • 

55.06 32.0 4777 540 • • • • • 

47.40 37.0 4777 540 • • • • • 

43.09 41.0 4777 540 • • • • • 

60.71 29 3539 400 • • • • 

55.19 32 4424 500 • • • • 

49.58 35 4777 540 • • • • 

42.50 41 4777 540 • • • • • 

38.45 46 4777 540 • • • • • • 

35.49 49 4777 540 • • • • • • 

30.86 57 4777 540 • • • • • • 

28.02 62 4777 540 • • • • • • 

25.59 68 4777 540 • • • • • • 

23.48 75 4777 540 • • • • • • 

21.63 81 4777 540 • • • • • • 

19.64 89 4777 540 • • • • • • 

17.89 98 4777 540 • • • • • • 

16.39 107 4777 540 • • • • • • 

14.63 120 4777 540 • • • • • • 

13.05 134 4777 540 • • • • 

11.09 158 4733 535 • • • • 

9.23 190 4654 526 • • • • 

8.39 209 4512 510 • • • • • • 

7.68 228 4132 467 • • • • • • 

6.86 255 3919 443 • • • • • • 

6.12 286 3592 406 • • • • 

5.20 337 3344 378 • • • • 

4.33 404 2875 325 • • • • 

5 - 55




Gear Type 

FD.68B-D28 

8848 lb in 

FD.68B-Z28 

8848 lb in 


5 - 56 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

39638 0.05 8848 1 000 • 

34196 0.05 8848 1 000 • • 

29378 0.06 8848 1 000 • • 

27047 0.06 8848 1 000 • • • 

24588 0.07 8848 1 000 • • • 

21763 0.07 8848 1 000 • • • 

20908 0.08 8848 1 000 • 

18038 0.09 8848 1 000 • • 

15497 0.11 8848 1 000 • • 

14267 0.12 8848 1 000 • • • 

12970 0.13 8848 1 000 • • • 

11480 0.15 8848 1 000 • • • 

9615 0.18 8848 1 000 • • • 

8198 0.21 8848 1 000 • • • 

6969 0.24 8848 1 000 • • • 

6056 0.28 8848 1 000 • • • 

5271 0.32 8848 1 000 • • • 

4755 0.35 8848 1 000 • • • 

4454 0.38 8848 1 000 • 

3756 0.45 8848 1 000 • • 

3335 0.50 8848 1 000 • • 

2924 0.58 8848 1 000 • • • 

2916 0.64 8848 1 000 • • • 

2322 0.72 8848 1 000 • • • 

2035 0.82 8848 1 000 • • • 

1789 0.94 8848 1 000 • • • 

1616 1.00 8848 1 000 • • • • 

1408 1.20 8848 1 000 • • • 

1265 1.30 8848 1 000 • • • 

1142 1.50 8848 1 000 • • • • 

1036 1.60 8848 1 000 • • • • 

942 1.80 8848 1 000 • • • • 

833 2.00 8848 1 000 • • • • 

769 2.20 8848 1 000 • • • • 

662 2.50 8848 1 000 • • • • 

602 2.80 8848 1 000 • • • • 

547 3.10 8848 1 000 • • • • 

496 3.40 8848 1 000 • • • • 

452 3.70 8848 1 000 • • • • 

399 4.20 8848 1 000 • • • • 

369 4.60 8848 1 000 • • • • 

317 5.30 8848 1 000 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 



FD.68B 

8848 lb in 

FZ.68B 

8848 lb in 

[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

296.18 5.9 8848 1 000 • • • 

263.39 6.6 8848 1 000 • • • 

228.48 7.7 8848 1 000 • • • • 

213.48 8.2 8848 1 000 • • • • 

187.76 9.3 8848 1 000 • • • • 

164.44 10.6 8848 1 000 • • • • • 

145.44 12.0 8848 1 000 • • • • • 

131.82 13.3 8848 1 000 • • • • • 

116.36 15.0 8848 1 000 • • • • • 

104.96 16.7 8848 1 000 • • • • • 

95.20 18.4 8848 1 000 • • • • • 

86.74 20.0 8848 1 000 • • • • • 

79.33 22.0 8848 1 000 • • • • • 

70.93 25.0 8848 1 000 • • • • • 

65.14 27.0 8848 1 000 • • • • • 

58.71 30.0 8848 1 000 • • • • • 

50.48 35.0 8848 1 000 • • • • • 

61.17 29 7520 850 • • 

53.50 33 8848 1 000 • • • 

48.03 36 8848 1 000 • • • • 

43.87 40 8848 1 000 • • • • 

38.93 45 8848 1 000 • • • • • 

35.93 49 8848 1 000 • • • • • 

32.50 54 8848 1 000 • • • • • 

29.93 58 8848 1 000 • • • • • 

27.68 63 8848 1 000 • • • • • 

25.69 68 8848 1 000 • • • • • 

22.67 77 8848 1 000 • • • • • 

20.93 84 8848 1 000 • • • • • 

18.75 93 8848 1 000 • • • • • 

17.29 101 8848 1 000 • • • • • 

14.51 121 8848 1 000 • • • • • 

12.38 141 8848 1 000 • • • • • 

10.31 170 8848 1 000 • • • 

8.55 205 8848 1 000 • • • 

8.03 218 7936 897 • • • • • 

6.74 260 7388 835 • • • • • 

5.75 304 6680 755 • • • • • 

4.79 365 6034 682 • • • 

3.97 441 5211 589 • • • 

5 - 57




Gear Type 

FD.88B-D28 

16811 lb in 

FD.88B-Z28 

16811 lb in 


5 - 58 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 

54705 0.04 16811 1 900 • 

47195 0.04 16811 1 900 • • 

40546 0.04 16811 1 900 • • 

37328 0.05 16811 1 900 • • • 

33935 0.05 16811 1 900 • • • 

30036 0.06 16811 1 900 • • • 

28814 0.06 16811 1 900 • • 

24755 0.07 16811 1 900 • • 

22790 0.07 16811 1 900 • • • 

20718 0.08 16811 1 900 • • • 

18338 0.09 16811 1 900 • • • 

15360 0.11 16811 1 900 • • • 

13096 0.13 16811 1 900 • • • 

11132 0.15 16811 1 900 • • • 

9674 0.17 16811 1 900 • • • 

8420 0.20 16811 1 900 • • • 

7595 0.22 16811 1 900 • • • 

6703 0.25 16811 1 900 • • • 

6000 0.28 16811 1 900 • • 

5327 0.32 16811 1 900 • • 

4670 0.36 16811 1 900 • • • 

4179 0.40 16811 1 900 • • • 

3709 0.45 16811 1 900 • • • 

3251 0.52 16811 1 900 • • • 

2858 0.59 16811 1 900 • • • 

2582 0.65 16811 1 900 • • • • 

2250 0.75 16811 1 900 • • • 

2021 0.83 16811 1 900 • • • 

1824 0.92 16811 1 900 • • • • 

1654 1.00 16811 1 900 • • • • 

1505 1.10 16811 1 900 • • • • 

1331 1.30 16811 1 900 • • • • 

1229 1.40 16811 1 900 • • • • 

1058 1.60 16811 1 900 • • • • 

962 1.70 16811 1 900 • • • • 

874 1.90 16811 1 900 • • • • 

793 2.10 16811 1 900 • • • • 

721 2.30 16811 1 900 • • • • 

638 2.60 16811 1 900 • • • • 

589 2.90 16811 1 900 • • • • 

507 3.30 16811 1 900 • • • • 

461 3.60 16811 1 900 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 



FD.88B 

16811 lb in 

FZ.88B 

16811 lb in 

[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

404.92 4.3 16811 1 900 • • • 

358.33 4.9 16811 1 900 • • • • 

325.76 5.4 16811 1 900 • • • • 

292.64 6.0 16811 1 900 • • • • 

250.83 7.0 16811 1 900 • • • • • 

226.94 7.7 16811 1 900 • • • • • • 

209.49 8.4 16811 1 900 • • • • • • 

182.15 9.6 16811 1 900 • • • • • • • 

165.38 10.6 16811 1 900 • • • • • • • 

151.01 11.6 16811 1 900 • • • • • • • 

138.56 12.6 16811 1 900 • • • • • • • 

127.66 13.7 16811 1 900 • • • • • • • 

115.93 15.1 16811 1 900 • • • • • • • 

105.61 16.6 16811 1 900 • • • • • • • 

96.75 18.1 16811 1 900 • • • • • • • 

86.33 20.0 16811 1 900 • • • • • • • 

77.04 23.0 16811 1 900 • • • • • 

65.43 27.0 16811 1 900 • • • • • 

54.47 32.0 16811 1 900 • • • • • 

64.58 27 16811 1 900 • • • • 

59.13 30 16811 1 900 • • • • 

52.60 33 16811 1 900 • • • • • 

48.03 36 16811 1 900 • • • • • 

44.20 40 16811 1 900 • • • • • 

40.83 43 16811 1 900 • • • • • 

37.89 46 16811 1 900 • • • • • • 

35.29 50 16811 1 900 • • • • • • 

31.91 55 16811 1 900 • • • • • • 

29.38 60 16811 1 900 • • • • • • 

26.42 66 16811 1 900 • • • • • • 

24.38 72 16811 1 900 • • • • • • 

20.65 85 16811 1 900 • • • • • • 

18.00 97 16811 1 900 • • • • • • 

15.31 114 16811 1 900 • • • • 

13.07 134 16811 1 900 • • • • 

10.71 163 16811 1 900 • • • • 

9.19 190 14669 1 658 • • • • • • 

8.01 218 13696 1 548 • • • • • • 

6.82 257 12864 1 454 • • • • 

5.82 301 11927 1 348 • • • • 

4.77 367 10608 1 199 • • • • 

5 - 59




Ratio n2 (60 Hz) T2 T2 T 1) 


3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 

Size 


[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

FD.108B-D38 

30083 lb in 

FD.108B-Z38 

30083 lb in 


5 - 60 

66190 0.03 30083 3400 • • • 

58766 0.03 30083 3400 • • • 

51521 0.03 30083 3400 • • • • 

46105 0.04 30083 3400 • • • • 

40922 0.04 30083 3400 • • • • 

35860 0.05 30083 3400 • • • • 

31530 0.06 30083 3400 • • • • 

28485 0.06 30083 3400 • • • • 

24821 0.07 30083 3400 • • • • 

22293 0.08 30083 3400 • • • • 

20125 0.09 30083 3400 • • • • 

18247 0.10 30083 3400 • • • • 

16603 0.11 30083 3400 • • • • 

15230 0.11 30083 3400 • • • 

13544 0.13 30083 3400 • • • 

11749 0.15 30083 3400 • • • • 

10977 0.16 30083 3400 • • • • 

9655 0.18 30083 3400 • • • • 

8456 0.21 30083 3400 • • • • • 

7479 0.23 30083 3400 • • • • • 

6778 0.26 30083 3400 • • • • • 

5983 0.29 30083 3400 • • • • • 

5397 0.32 30083 3400 • • • • • 

4895 0.36 30083 3400 • • • • • 

4460 0.39 30083 3400 • • • • • 

4079 0.43 30083 3400 • • • • • 

3648 0.48 30083 3400 • • • • • 

3349 0.52 30083 3400 • • • • • 

3019 0.58 30083 3400 • • • • • 

2596 0.67 30083 3400 • • • • • 

2315 0.76 30083 3400 • • • • • 

2126 0.82 30083 3400 • • • • • 

1916 0.91 30083 3400 • • • • • 

1647 1.10 30083 3400 • • • • • 

1526 1.10 30083 3400 • • • • • 

1384 1.30 30083 3400 • • • • • 

1261 1.40 30083 3400 • • • • • 

1153 1.50 30083 3400 • • • • • 

1031 1.70 30083 3400 • • • • • 

947 1.80 30083 3400 • • • • • 

853 2.10 30083 3400 • • • • • 

734 2.40 30083 3400 • • • • • 

732 2.40 30083 3400 • • • • • 

654 2.70 30083 3400 • • • • • 

601 2.90 30083 3400 • • • • • 

541 3.20 30083 3400 • • • • • 

466 3.80 30083 3400 • • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

FD.108B 424.49 4.1 30083 3400 • • 

382.79 4.6 30083 3400 • • 

30083 lb in 345.19 5.1 30083 3400 • • 

301.88 5.8 30083 3400 • • • 

271.01 6.5 30083 3400 • • • • 

247.53 7.1 30083 3400 • • • • 

219.66 8.0 30083 3400 • • • • • 

202.77 8.6 30083 3400 • • • • • 

183.39 9.5 30083 3400 • • • • • 

168.88 10.4 30083 3400 • • • • • 

156.19 11.2 30083 3400 • • • • • • 

144.99 12.1 30083 3400 • • • • • • 

127.92 13.7 30083 3400 • • • • • • 

118.11 14.8 30083 3400 • • • • • • 

105.81 16.5 30083 3400 • • • • • • 

97.57 17.9 30083 3400 • • • • • • 

81.86 21.0 30083 3400 • • • • • • 

69.84 25.0 30083 3400 • • • • • • 

58.20 30.0 30083 3400 • • • • 

48.24 36.0 30083 3400 • • • • 

FZ.108B 64.21 27 26544 3000 • • • 

58.80 30 26544 3000 • • • 

30083 lb in 54.17 32 30083 3400 • • • 

50.15 35 30083 3400 • • • 

46.64 38 30083 3400 • • • • 

43.54 40 30083 3400 • • • • 

38.95 45 30083 3400 • • • • • 

36.10 48 30083 3400 • • • • • 

33.09 53 30083 3400 • • • • • 

30.33 58 30083 3400 • • • • • 

25.85 68 30083 3400 • • • • • 

22.81 77 30083 3400 • • • • • 

19.41 90 30083 3400 • • • • • 

16.82 104 30083 3400 • • • • • 

14.16 124 29233 3304 • • • • • 

12.77 137 28747 3249 • • • 

10.98 159 27897 3153 • • • 

10.04 174 29853 3374 • • • • • 

8.70 201 27446 3102 • • • • • 

7.32 239 25243 2853 • • • • • 

6.60 265 23456 2651 • • • 

5.68 308 21429 2422 • • • 

5 - 61





5 - 62 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752198 / 1752 



[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

FD.128B-D38 68070 0.03 53972 6100 • • • 

60435 0.03 53972 6100 • • • 

53972 lb in 

FD.128B-Z38 

53972 lb in 

FD.128B-Z48 

53972 lb in 

52984 0.03 53972 6100 • • • • 

47415 0.04 53972 6100 • • • • 

42084 0.04 53972 6100 • • • • 

36878 0.05 53972 6100 • • • • 

32425 0.05 53972 6100 • • • • 

29294 0.06 53972 6100 • • • • 

25526 0.07 53972 6100 • • • • 

22926 0.08 53972 6100 • • • • 

20697 0.08 53972 6100 • • • • 

18765 0.09 53972 6100 • • • • 

17075 0.10 53972 6100 • • • • 

15663 0.11 53972 6100 • • • 

13928 0.13 53972 6100 • • • 

12083 0.14 53972 6100 • • • • 

11289 0.16 53972 6100 • • • • 

9929 0.18 53972 6100 • • • • 

8696 0.20 53972 6100 • • • • • 

7691 0.23 53972 6100 • • • • • 

6971 0.25 53972 6100 • • • • • 

6153 0.28 53972 6100 • • • • • 

5551 0.32 53972 6100 • • • • • 

5034 0.35 53972 6100 • • • • • 

4587 0.38 53972 6100 • • • • • 

4195 0.42 53972 6100 • • • • • 

3751 0.47 53972 6100 • • • • • 

3445 0.51 53972 6100 • • • • • 

3105 0.56 53972 6100 • • • • • 

2670 0.66 53972 6100 • • • • • 

2381 0.73 53972 6100 • • • • • 

2186 0.80 53972 6100 • • • • • 

1970 0.89 53972 6100 • • • • • 

1694 1.00 53972 6100 • • • • • 

1504 1.2 53972 6100 • • • • • • 

1370 1.3 53972 6100 • • • • • • 

1255 1.4 53972 6100 • • • • • • 

1120 1.6 53972 6100 • • • • • • 

999 1.8 53972 6100 • • • • 

849 2.1 53972 6100 • • • • 

706 2.5 53972 6100 • • • • 

695 2.5 53972 6100 • • • • • • 

620 2.8 53972 6100 • • • • 

527 3.3 53972 6100 • • • • 

439 4.0 53972 6100 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





T 1 1) [Nm / lb in] 

10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 291 / 2575 356 / 3150 580 / 5132 


Gear Type (4 pol.) (SF=1) (SF=1) 140TC 180TC 210TC 250TC 280TC 320TC 360TC 

FD.128B 

53972 lb in 

FZ.128B 

53972 lb in 

[-] [rpm] [lb in] [Nm] 90 100 112 132 160 180 200 225 250 280 

447.96 3.9 53972 6100 • 

405.47 4.3 53972 6100 • 

354.99 4.9 53972 6100 • • 

320.24 5.5 53972 6100 • • • 

293.22 6.0 53972 6100 • • • 

260.84 6.7 53972 6100 • • • • 

238.39 7.3 53972 6100 • • • • 

219.15 8.0 53972 6100 • • • • 

202.48 8.6 53972 6100 • • • • 

187.88 9.3 53972 6100 • • • • • 

175.01 10.0 53972 6100 • • • • • 

158.22 11.1 53972 6100 • • • • • • • 

145.66 12.0 53972 6100 • • • • • • • 

131.01 13.4 53972 6100 • • • • • • • 

120.87 14.5 53972 6100 • • • • • • • 

102.41 17.1 53972 6100 • • • • • • • 

89.25 19.6 53972 6100 • • • • • • • 

75.93 23.0 53972 6100 • • • • • • 

64.80 27.0 53972 6100 • • • • • • 

53.13 33.0 53972 6100 • • • • • • 

56.42 31 38046 4300 • • 

52.29 33 40700 4600 • • 

49.71 35 43355 4900 • • • 

46.46 38 45567 5150 • • • 

40.99 43 50433 5700 • • • • • 

38.66 45 53088 6000 • • • • • 

34.64 51 53972 6100 • • • • • • 

31.98 55 53972 6100 • • • • • • 

27.33 64 53972 6100 • • • • • • 

24.70 71 53972 6100 • • • • • • 

23.80 74 53972 6100 • • • • • • 

20.58 85 53972 6100 • • • • • • 

17.95 97 53972 6100 • • • • • • 

15.36 114 51734 5847 • • • • • • 

13.76 127 49902 5640 • • • • • 

11.65 150 47310 5347 • • • • • 

10.07 174 45239 5113 • • • • 

7.57 231 40391 4565 • • • • 

6.91 253 31782 3592 • • • • • 

5.85 299 29207 3301 • • • • • 

5.05 347 27756 3137 • • • • 

3.80 461 23960 2708 • • • • 

5 - 63





5 - 64 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 



FD.148B-D38 

79632 lb in 

FD.148B-Z38 

79632 lb in 

FD.148B-Z48 

79632 lb in 

[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

70576 0.02 79632 9000 • • • 

62660 0.03 79632 9000 • • • 

54935 0.03 79632 9000 • • • • 

49161 0.04 79632 9000 • • • • 

43633 0.04 79632 9000 • • • • 

38236 0.05 79632 9000 • • • • 

33619 0.05 79632 9000 • • • • 

30373 0.06 79632 9000 • • • • 

26466 0.07 79632 9000 • • • • 

23770 0.07 79632 9000 • • • • 

21459 0.08 79632 9000 • • • • 

19456 0.09 79632 9000 • • • • 

17704 0.10 79632 9000 • • • • 

16239 0.11 79632 9000 • • • 

14441 0.12 79632 9000 • • • 

12527 0.14 79632 9000 • • • • 

11705 0.15 79632 9000 • • • • 

10295 0.17 79632 9000 • • • • 

9016 0.19 79632 9000 • • • • • 

7975 0.22 79632 9000 • • • • • 

7227 0.24 79632 9000 • • • • • 

6380 0.27 79632 9000 • • • • • 

5755 0.30 79632 9000 • • • • • 

5220 0.34 79632 9000 • • • • • 

4756 0.37 79632 9000 • • • • • 

4350 0.40 79632 9000 • • • • • 

3889 0.45 79632 9000 • • • • • 

3571 0.49 79632 9000 • • • • • 

3219 0.54 79632 9000 • • • • • 

2768 0.63 79632 9000 • • • • • 

2468 0.71 79632 9000 • • • • • 

2266 0.77 79632 9000 • • • • • 

2043 0.86 79632 9000 • • • • • 

1757 1.00 79632 9000 • • • • • 

1634 1.1 79632 9000 • • • • • • 

1489 1.2 79632 9000 • • • • • • 

1364 1.3 79632 9000 • • • • • • 

1217 1.4 79632 9000 • • • • • • 

1086 1.6 79632 9000 • • • • 

922 1.9 79632 9000 • • • • 

768 2.3 79632 9000 • • • • • • 

674 2.6 79632 9000 • • • • 

573 3.1 79632 9000 • • • • 

477 3.7 79632 9000 • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





T 1 1) [Nm / lb in] 


FD.148B 

79632 lb in 

FZ.148B 

79632 lb in 

10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 291 / 2575 356 / 3150 580 / 5132 


[-] [rpm] [lb in] [Nm] 90 100 112 132 160 180 200 225 250 280 

449.21 3.9 79632 9000 • • 

411.98 4.2 79632 9000 • • 

368.06 4.8 79632 9000 • • • 

337.07 5.2 79632 9000 • • • 

310.51 5.6 79632 9000 • • • 

287.49 6.1 79632 9000 • • • 

267.35 6.5 79632 9000 • • • • 

249.58 7.0 79632 9000 • • • • 

223.31 7.8 79632 9000 • • • • • • 

206.93 8.5 79632 9000 • • • • • • 

189.69 9.2 79632 9000 • • • • • • • 

173.89 10.1 79632 9000 • • • • • • • 

148.18 11.8 79632 9000 • • • • • • • 

130.76 13.4 79632 9000 • • • • • • • 

111.29 15.7 79632 9000 • • • • • • • 

96.43 18.1 79632 9000 • • • • • • • 

81.15 22.0 79632 9000 • • • • • • • 

73.22 24.0 79632 9000 • • • • • 

62.93 28.0 79632 9000 • • • • • 

68.23 26 49548 5600 • 

64.37 27 57512 6500 • • 

60.21 29 61936 7000 • • 

53.53 33 70784 8000 • • • • 

50.54 35 70784 8000 • • • • 

45.37 39 76977 8700 • • • • • 

41.64 42 79632 9000 • • • • • 

35.93 49 79632 9000 • • • • • • 

31.43 56 79632 9000 • • • • • • 

27.34 64 79632 9000 • • • • • • 

23.98 73 79632 9000 • • • • • • 

20.28 86 79632 9000 • • • • • • 

18.40 95 79632 9000 • • • • • • 

16.04 109 79632 9000 • • • • • • 

13.62 128 75376 8519 • • • • • 

10.43 168 69209 7822 • • • • • 

9.51 184 58228 6581 • • • • • • 

8.29 211 54892 6204 • • • • • • 

7.04 249 51495 5820 • • • • • 

5.39 325 45337 5124 • • • • • 

5 - 65





5 - 66 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 


FD.168B-D48 

123872 lb in 

FD.168B-Z48 

123872 lb in 

FD.168B-Z68 

123872 lb in 


[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

65160 0.03 123872 14000 • • • 

57946 0.03 123872 14000 • • • 

50267 0.03 123872 14000 • • • • 

46966 0.04 123872 14000 • • • • 

41307 0.04 123872 14000 • • • • 

36177 0.05 123872 14000 • • • • • 

31998 0.05 123872 14000 • • • • • 

29000 0.06 123872 14000 • • • • • 

25599 0.07 123872 14000 • • • • • 

23093 0.08 123872 14000 • • • • • 

20944 0.08 123872 14000 • • • • • 

19083 0.09 123872 14000 • • • • • 

17454 0.10 123872 14000 • • • • • 

16007 0.11 123872 14000 • • • 

14165 0.12 123872 14000 • • • • 

12878 0.14 123872 14000 • • • • 

11568 0.15 123872 14000 • • • • 

9916 0.18 123872 14000 • • • • • 

8971 0.20 123872 14000 • • • • • • 

8281 0.21 123872 14000 • • • • • • 

7201 0.24 123872 14000 • • • • • • 

6538 0.27 123872 14000 • • • • • • 

5970 0.29 123872 14000 • • • • • • 

5477 0.32 123872 14000 • • • • • • 

5046 0.35 123872 14000 • • • • • • 

4583 0.38 123872 14000 • • • • • • 

4175 0.42 123872 14000 • • • • • • 

3825 0.46 123872 14000 • • • • • • 

3413 0.51 123872 14000 • • • • • • 

3046 0.57 123872 14000 • • • • 

2587 0.68 123872 14000 • • • • 

2153 0.81 123872 14000 • • • • 

2119 0.83 123872 14000 • • • • • • 

1891 0.93 123872 14000 • • • • 

1606 1.10 123872 14000 • • • • 

1337 1.30 123872 14000 • • • • 

1298 1.3 123872 14000 • • • • • 

1108 1.6 123872 14000 • • • • • 

923 1.9 123872 14000 • • • 

765 2.3 123872 14000 • • • 

675 2.6 123872 14000 • • • • • 

576 3.0 123872 14000 • • • • • 

480 3.6 123872 14000 • • • 

398 4.4 123872 14000 • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





T 1 1) [Nm / lb in] 

20/177 26/230 61/540 98/867 198/1752 198/1752 291/2575 356/3150 580/5132 1290/11414 


FD.168B 

123872 lb in 

FZ.168B 

123872 lb in 


[-] [rpm] [lb in] [Nm] 100 112 132 160 180 200 225 250 280 315 

369.26 4.7 123872 14000 • 

338.49 5.2 123872 14000 • 

312.12 5.6 123872 14000 • 

289.26 6.0 123872 14000 • 

275.03 6.4 123872 14000 • • 

257.04 6.8 123872 14000 • • 

226.74 7.7 123872 14000 • • • • 

213.87 8.2 123872 14000 • • • • 

191.63 9.1 123872 14000 • • • • • 

176.94 9.9 123872 14000 • • • • • 

151.18 11.6 123872 14000 • • • • • 

136.63 12.8 123872 14000 • • • • • 

131.64 13.3 123872 14000 • • • • • • 

113.86 15.4 123872 14000 • • • • • • 

99.31 17.6 123872 14000 • • • • • • 

84.99 21.0 123872 14000 • • • • • • 

76.12 23.0 123872 14000 • • • • • • 

64.47 27.0 123872 14000 • • • • • • 

55.68 31.0 123872 14000 • • • • • 

41.85 42.0 123872 14000 • • • • • 

53.48 33 79632 9000 • • • • 

48.29 36 92904 10500 • • • • • 

45.25 39 101752 11500 • • • • • • 

38.87 45 115024 13000 • • • • • • 

33.58 52 115024 13000 • • • • • • • 

29.64 59 123872 14000 • • • • • • • 

26.68 66 123872 14000 • • • • • • • 

22.14 79 123872 14000 • • • • • • • 

20.19 87 123872 14000 • • • • • • • 

17.71 99 123872 14000 • • • • • • • 

15.22 115 123872 14000 • • • • • • 

11.86 148 115696 13076 • • • • • • 

9.42 186 107476 12147 • • • • • 

8.54 205 99601 11257 • • • • • • 

6.65 263 88577 10011 • • • • • • 

5.28 331 76818 8682 • • • • • 

5 - 67





5 - 68 

T 1 1) [Nm / lb in] 

3 / 27 3 / 27 5 / 44 10 / 88 20 / 177 26 / 230 61 / 540 98 / 867 198 / 1752 198 / 1752 


FD.188B-D48 

176960 lb in 

FD.188B-Z48 

176960 lb in 

FD.188B-Z68 

176960 lb in 


[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

71388 0.02 176960 20000 • • • 

63484 0.03 176960 20000 • • • 

55070 0.03 176960 20000 • • • • 

51455 0.03 176960 20000 • • • • 

45255 0.04 176960 20000 • • • • 

39634 0.04 176960 20000 • • • • • 

35056 0.05 176960 20000 • • • • • 

31771 0.06 176960 20000 • • • • • 

28045 0.06 176960 20000 • • • • • 

25299 0.07 176960 20000 • • • • • 

22946 0.08 176960 20000 • • • • • 

20906 0.08 176960 20000 • • • • • 

19122 0.09 176960 20000 • • • • • 

17537 0.10 176960 20000 • • • 

15519 0.11 176960 20000 • • • • 

14108 0.12 176960 20000 • • • • 

12674 0.14 176960 20000 • • • • 

10863 0.16 176960 20000 • • • • • 

9829 0.18 176960 20000 • • • • • • 

9073 0.19 176960 20000 • • • • • • 

7889 0.22 176960 20000 • • • • • • 

7163 0.24 176960 20000 • • • • • • 

6540 0.27 176960 20000 • • • • • • 

6001 0.29 176960 20000 • • • • • • 

5529 0.32 176960 20000 • • • • • • 

5021 0.35 176960 20000 • • • • • • 

4574 0.38 176960 20000 • • • • • • 

4190 0.42 176960 20000 • • • • • • 

3739 0.47 176960 20000 • • • • • • 

3337 0.52 176960 20000 • • • • 

2834 0.62 176960 20000 • • • • 

2359 0.74 176960 20000 • • • • 

2322 0.75 176960 20000 • • • • • • 

2072 0.84 176960 20000 • • • • 

1760 0.99 176960 20000 • • • • 

1465 1.20 176960 20000 • • • • 

1449 1.2 176960 20000 • • • • • 

1236 1.4 176960 20000 • • • • • 

1030 1.7 176960 20000 • • • 

854 2.0 176960 20000 • • • 

754 2.3 176960 20000 • • • • • 

643 2.7 176960 20000 • • • • • 

536 3.3 176960 20000 • • • 

444 3.9 176960 20000 • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





T 1 1) [Nm / lb in] 

20/177 26/230 61/540 98/867 198/1752 198/1752 291/2575 356/3150 580/5132 1290/11414 


FD.188B 

176960 lb in 

FZ.188B 

176960 lb in 


[-] [rpm] [lb in] [Nm] 100 112 132 160 180 200 225 250 280 315 

403.86 4.3 176960 20000 • 

370.52 4.7 176960 20000 • 

341.94 5.1 176960 20000 • 

317.18 5.5 176960 20000 • 

299.20 5.8 176960 20000 • • 

279.86 6.3 176960 20000 • • 

248.85 7.0 176960 20000 • • • • 

234.93 7.4 176960 20000 • • • • 

210.89 8.3 176960 20000 • • • • • 

193.56 9.0 176960 20000 • • • • • 

167.03 10.5 176960 20000 • • • • • • 

146.11 12.0 176960 20000 • • • • • • 

127.07 13.8 176960 20000 • • • • • • • 

111.49 15.7 176960 20000 • • • • • • • 

94.28 18.6 176960 20000 • • • • • • • 

85.54 20.0 176960 20000 • • • • • • • 

74.58 23.0 176960 20000 • • • • • • • 

63.32 28.0 176960 20000 • • • • • • 

48.46 36.0 176960 20000 • • • • • • 

52.63 33 146699 16580 • • • • 

48.47 36 149265 16870 • • • • • 

42.07 42 154840 17500 • • • • • 

37.08 47 154928 17510 • • • • • • 

32.54 54 164130 18550 • • • • • • 

29.33 60 176960 20000 • • • • • • 

24.90 70 176960 20000 • • • • • • 

23.13 76 176960 20000 • • • • • • 

19.87 88 175101 19790 • • • • • • 

16.95 103 166961 18870 • • • • • • 

13.35 131 155370 17560 • • • • • • • 

10.74 163 142187 16070 • • • • • • • 

9.34 187 132631 14990 • • • • • • 

8.34 210 125553 14190 • • • 

5 - 69




5 - 70 

T 1 1) [Nm / lb in] 

20/177 26/230 61/540 98/867 198/1752 198/1752 291/2575 356/3150 580/5132 1290/11414 


FD.208-D68 

300900 lb in 

FD.208-Z68 

300900 lb in 

FD.208-Z88 

300900 lb in 


[-] [rpm] [lb in] [Nm] 63 71 80 90 100 112 132 160 180 200 

61412 0.03 300900 34000 • • 

54347 0.03 300900 34000 • • • 

49406 0.04 300900 34000 • • • 

44383 0.04 300900 34000 • • • 

38043 0.05 300900 34000 • • • • 

34420 0.05 300900 34000 • • • • 

31772 0.06 300900 34000 • • • • 

27626 0.06 300900 34000 • • • • 

20583 0.09 300900 34000 • • • • 

22903 0.08 300900 34000 • • • • 

21014 0.08 300900 34000 • • • • 

19361 0.09 300900 34000 • • • • 

17583 0.10 300900 34000 • • • • 

16018 0.11 300900 34000 • • • • 

14674 0.12 300900 34000 • • • • 

13093 0.13 300900 34000 • • • • 

11685 0.15 300900 34000 • • • 

9924 0.18 300900 34000 • • • 

8251 0.21 300900 34000 • • • • 

7536 0.23 300900 34000 • • • • 

6688 0.26 300900 34000 • • • • • 

6173 0.28 300900 34000 • • • • • 

5584 0.31 300900 34000 • • • • • 

5142 0.34 300900 34000 • • • • • 

4755 0.37 300900 34000 • • • • • • 

4414 0.40 300900 34000 • • • • • • 

3895 0.45 300900 34000 • • • • • • 

3596 0.49 300900 34000 • • • • • • 

3222 0.54 300900 34000 • • • • • • 

2970 0.59 300900 34000 • • • • • 

2492 0.70 300900 34000 • • • • • 

2126 0.82 300900 34000 • • • • • 

1772 0.99 300900 34000 • • • • 

1469 1.19 300900 34000 • • • • 

1296 1.35 300900 34000 • • • • • 

1106 1.58 300900 34000 • • • • • 

921 1.90 300900 34000 • • • • 

764 2.29 300900 34000 • • • • 

694 2.52 300900 34000 • • • • • • 

636 2.75 300900 34000 • • • • • • 

543 3.22 300900 34000 • • • • • • 

445 3.93 300900 34000 • • • • • • 

406 4.31 300900 34000 • • • • • • 

347 5.04 300900 34000 • • • • • • 

284 6.16 300900 34000 • • • • • • 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T 1 1) [Nm / lb in] 

20/177 26/230 61/540 98/867 198/1752 198/1752 291/2575 356/3150 580/5132 1290/11414 


FD.208 

29901... 

34000 

FZ.208 

25469... 

32681 


[-] [rpm] [lb in] [Nm] 100 112 132 160 180 200 225 250 280 315 

242.01 7.23 300900 34000 • • • • 

218.54 8.01 300900 34000 • • • • • 

204.81 8.54 300900 34000 • • • • • • • 

175.92 9.95 300900 34000 • • • • • • • 

151.99 11.51 300900 34000 • • • • • • • 

134.16 13.04 300900 34000 • • • • • • • 

120.77 14.49 300900 34000 • • • • • • • 

100.21 17.46 300900 34000 • • • • • • • 

91.38 19.15 300900 34000 • • • • • • • 

80.17 21.83 300900 34000 • • • • • • • 

68.90 25.40 300900 34000 • • • • • • • 

53.66 32.61 300900 34000 • • • • • • • 

42.63 41.05 300900 34000 • • • • • • 

38.84 45.06 300900 34000 • • • • • • • 

30.25 57.85 283536 32038 • • • • • • • 

24.03 72.83 264624 29901 • • • • • • 

20.06 87.24 289227 32681 • • • • • • • 

16.02 109.24 269810 30487 • • • • • • • 

13.09 133.69 253411 28634 • • • • • • 

11.51 152.04 243366 27499 • • • • 

10.57 165.56 237047 26785 • • • 

9.01 194.23 225401 25469 • • 

5 - 71



Improvement of Sealing Quality F.38B-168B 


5 - 72 

Housing 

4 

2 

Shaft 

4 

1 

3 

3 








F.28 and 188B double sealing optional. 


box, in sizes FD./FZ.48B ... FD./FZ.188B a breather must replace the plug screw. The breather dimensions are as follows. 


(0.79”) 

20 

FD./FZ. 48B ... 128B FD./FZ. 148B ... 188B 

ø27 

(ø1.06”) 

ø22 

(ø0.87”) 

4 

(0.16”) 

(0.95”) 

24 

ø32 

(ø1.26”) 

ø32 

(ø1.26”) 

4 

(0.16”) 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





Types øBD1 øBI1 øBI2 Ll1 


F.F28 120 4.72 70 2.76 72 2.84 24 0.95 

F.F28 160 6.30 70 2.76 103 4.06 8.5 0.34 

F.F38B 160 6.30 70 2.76 77 3.03 20 0.79 

F.F48B 200 7.87 84 3.31 90 3.54 22.5 0.89 

F.F68B 250 9.84 96 3.78 96 3.78 - - 

F.F88B 300 11.81 126 4.96 138 5.43 31 1.22 

F.F108B 350 13.78 176 6.93 185 7.28 32 1.26 

F.F128B 450 17.72 226 8.90 234 9.21 38.5 1.52 

F.F148B 450 17.72 246 9.69 262 10.31 34 1.34 

F.F168B 550 21.65 296 11.65 313 12.32 39 1.54 

F.F188B 660 25.98 296 11.65 296 11.65 - - 

5 - 73


Pin holes 

With housing flange ( C-Type ) for sizes F.Z.108B-188B, the output side can be pinned. 


connection. 



5 - 74 




F.Z.108B F.Z.128B 

F.Z.148B F.Z.168B, F.Z.188B 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Torque Arm for Parallel Shaft Gear Units 

Dimensions in inch 

mm 


Material: Natural Rubber Hardness 70±5 Shore A *Compression at max. torque 

Gear 

Units 

F.28 

F.38B 

F.48B 

F.68B 

F.88B 

F.108B 

F.128B 

F.148B 

F.168B 

F.188B 

FH FV FU UE GF GO GDC * Bushing Module 

Number 

5.51 

140 

0.59 

15 

0.41 + 0.02 

10.5 + 0.50 

1.18 

30 

0.08 

2 

0.39 

10 

0.07 

1.80 

086043 

5.51 

140 

0.59 

15 

0.41 + 0.02 

10.5 + 0.50 

1.18 

30 

0.10 

2.50 

0.47 

12 

0.15 

3.80 

086043 

7.28 

185 

0.79 

20 

0.49 + 0.02 

12.5 + 0.50 

1.57 

40 

0.12 

3 

0.47 

12 

0.15 

3.70 

086050 

8.58 

218 

0.79 

20 

0.49 + 0.02 

12.5 + 0.50 

1.57 

40 

0.12 

3 

0.63 

16 

0.22 

5.60 

086072 

10.94 

278 

1.18 

30 

0.83 + 0.02 

21.0 + 0.50 

2.36 

60 

0.16 

4 

0.79 

20 

0.20 

5.00 

086078 

13.62 

346 

1.18 

30 

0.83 + 0.02 

21 + 0.50 

2.36 

60 

0.16 

4 

1.02 

26 

0.29 

7.30 

086084 

15.55 

395 

1.57 

40 

0.98 + 0.02 

25 + 0.50 

3.14 

80 

0.24 

6 

1.18 

30 

0.31 

8.00 

086090 

19.09 

485 

1.57 

40 

0.98 + 0.02 

25 + 0.50 

3.14 

80 

0.24 

6 

1.42 

36 

0.37 

9.40 

086096 

21.65 

550 

1.97 

50 

1.22 + 0.02 

31 + 0.50 

4.72 

120 

0.31 

8 

1.97 

50 

0.24 

6.20 

086102 

24.41 

620 

1.97 

50 

1.22 + 0.02 

31 + 0.50 

4.72 

120 

0.31 

8 

1.97 

50 

0.33 

8.30 

086102 

The additional available rubber buffers are used to give elastic support between the gearboxes and the housing web. Torque arm will 

be delivered extra. 

The rubber buffers are suitable for all types of construction and are temperature resistant from -40°C to +80°C (-104°F to 176°F). 

5 - 75




F.A, F.AF, F.AZ, F. AS 1) , F.AFS 1) , F.AZS 1) , F.AT, F.AFT, F.AZT Dimensions in 



F. 28 

2.28 

58 

4.02 

102 

1.32 

33.5 

- - - 

F. 38B 

3.24 

82.2 

4.53 

115 

1.57 

40 

4.72 

120 

0.39 

10 

1.30 

33 

F. 48B 

3.90 

99 

5.12 

130 

1.73 

44 

5.20 

132 

0.39 

10 

1.30 

33 

F. 68B 

4.53 

115 

5.91 

150 

2.46 

62.5 

5.91 

150 

0.39 

10 

1.46 

37 

F. 88B 

5.39 

137 

7.48 

190 

2.76 

70 

7.48 

190 

0.51 

13 

1.97 

50 

F.108B 

7.36 

187 

9.45 

240 

3.15 

80 

9.65 

245 

0.51 

13 

2.17 

55 

F.128B 

9.17 

233 

11.50 

292 

3.35 

85 

11.61 

295 

0.63 

16 

1.89 

48 

F.148B 

10.14 

257.5 

13.15 

334 

3.94 

100 

13.19 

335 

0.51 

13 

1.97 

50 

F.168B 

12.19 

309.5 

15.35 

390 

5.10 

129.5 

15.75 

400 

0.51 

13 

1.97 

50 

F. 188B 

12.19 

309.5 

15.35 

390 

5.10 

129.5 

15.75 

400 

0.51 

13 

1.97 

50 

5 - 76 

casting 

1) For F.AS, F.ADS, F.AFS and F.AZS only steel protection cover is possible. For size 28 protection cover is standard. 

steel 

Inch 

mm 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




F.Z28 5 - 80 

F.Z38B 5 - 88 

F.Z48B 5 - 96 

F.Z68B 5 - 104 

F.Z88B 5 - 112 

F.Z108B 5 - 120 

F.Z128B 5 - 128 

F.Z148B 5 - 136 

F.Z168B 5 - 144 

F.Z188B 5 - 152 

F.F28 5 - 82 

F.F38B 5 - 90 

F.F48B 5 - 98 

F.F68B 5 - 106 

F.F88B 5 - 114 

F.F108B 5 - 122 

F.F128B 5 - 130 

F.F148B 5 - 138 

F.F168B 5 - 146 

F.F188B 5 - 154 

F.A28 / F.AZ28 5 - 84 

F.A38B / F.AZ38B 5 - 92 

F.A48B / F.AZ48B 5 - 100 

F.A68B / F.AZ68B 5 - 108 

F.A88B / F.AZ88B 5 - 116 

F.A108B / F.AZ108B 5 - 124 

F.A128B / F.AZ128B 5 - 132 

F.A148B / F.AZ148B 5 - 140 

F.A168B / F.AZ168B 5 - 148 

F.A168B / F.AZ188B 5 - 156 

F.AF28 5 - 86 

F.AF38B 5 - 94 

F.AF48B 5 - 102 

F.AF68B 5 - 110 

F.AF88B 5 - 118 

F.AF108B 5 - 126 

F.AF128B 5 - 134 

F.AF148B 5 - 142 

F.AF168B 5 - 150 

F.AF188B 5 - 158 

5 - 77



5 - 78 




F.A.S38B ... F.A.S188B 5 - 169 

F.38B-Z28 ... F.188B-Z68 5 - 170 

F.M88B ... F.M168B 5 - 176 

F.E88B ... F.E168B 5 - 179 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


5 - 79


Parallel Shaft Gear Motors 

with housing flange (C-type) 

FDZ/FZZ28 FZ 510 

[inch] 

Mounting 


4.02 2.91 3.39 0.12 M8x16 

Output Shaft 

U V V3 V0 TAP M UY Y BA 

1 1.97 1.5 0.252 3/8-16UNC 1.11 0.25 2.81 

Gearcase 

F E JA A GB SA FA DB J B BS AD OA TAP H XF FJ FH MC DIA GO 

2.56 3.94 3.19 4.69 3.44 2.36 1.22 3.9 0.75 3.82 0.24 5.59 8.61 M8x16 0.37 1.02 5.51 0.43 0.39 

Motor 

FDZ/FZZ28 


LA71 11.79 13.96 5.47 5.75 1/2" + 3/4" 22 

LA71Z 12.54 14.70 5.47 5.75 1/2" + 3/4" 22 

LA90S 15.61 18.41 6.85 6.42 1/2" + 3/4" 42 

LA90Z 17.38 20.18 6.85 6.42 1/2" + 3/4" 49 


5 - 80 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Mounting 


102 74 86 3 M8x16 

Output Shaft 


25,4 50 38,1 6,401 3/8“-16UNC 28,19 6,35 71,5 


FDZ/FZZ28 FZ 510 

[mm] 

Gearcase 

F E JA A GB SA FA DB J B BS AD OA TAP H XF FJ FH MC DIA GO 

65 100 81 119 87,5 60 31 99 19 97 6 142 218,8 M8x16 9,5 26 140 11 10 

Motor 

FDZ/FZZ28 


LA71 299.5 354.5 139 146 1/2" + 3/4" 10 

LA71Z 318.5 373.5 139 146 1/2" + 3/4" 10 

LA90S 396.5 467.5 174 163 1/2" + 3/4" 19 

LA90Z 441.5 512.5 174 163 1/2" + 3/4" 22 


5 - 81




FDF/FZF28 

Flange 

BD AK GA AJ D3 BB BA BF 

4.72 3.15 0.31 3.94 - 0.12 3.56 0.26 

6.3 4.3 0.35 5.12 5.35 0.14 3.56 0.35 

Output Shaft 

U V V3 V0 TAP M UY Y AM 

1 1.97 1.5 0.252 3/8-16UNC 1.11 0.25 1.97 

Gearcase 

F E JA A GB SA FA DB J B GL AD OA TAP H XF GO 

2.56 3.94 3.19 4.69 3.44 2.36 1.22 3.9 0.75 3.82 0.98 5.59 8.61 M8x16 1.12 0.39 

Motor 

FDF/FZF28 


LA71 11.79 13.96 5.47 5.75 1/2" + 3/4" 22 

LA71Z 12.54 14.70 5.47 5.75 1/2" + 3/4" 22 

LA90S 15.61 18.41 6.85 6.42 1/2" + 3/4" 44 

LA90Z 17.38 20.18 6.85 6.42 1/2" + 3/4" 51 


5 - 82 

FF 510 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 

BD AK GA AJ D3 BB BA BF 

120 80 8 100 - 3 90,5 6,6 

160 110 9 130 136 3,5 90,5 9 

Output Shaft 


25,4 50 38,1 6,401 3/8“-16UNC 28,19 6,35 50 


FDF/FZF28 FF 510 

[mm] 

Gearcase 


65 100 81 119 87,5 60 31 99 19 97 25 142 218,8 M8x16 28,5 10 

Motor 

FDF/FZF28 


LA71 318.5 373.5 139 146 1/2" + 3/4" 10 

LA71Z 337.5 392.5 139 146 1/2" + 3/4" 10 

LA90S 415.5 486.5 174 163 1/2" + 3/4" 20 

LA90Z 460.5 531.5 174 163 1/2" + 3/4" 23 


5 - 83



Shaft mounted 


FDA/FZA28 

FDAZ/FZAZ28 


AK BD AJ BB TAP BF U UF VC VG VH VL M BOLT UY Y EB EH 

4.02 2.91 3.39 0.12 M8x16 1 1.575 4.094 3.504 1.547 2.76 3/8-1 3/4UNC 1.124 0.25 1.575 4.21 

Gearcase 

F E JA A GB SA FA DB J B BS BA AD OA TAP H XF FJ FH MC DIA GO 

2.56 3.94 3.19 4.69 3.44 2.36 1.22 3.9 0.75 3.82 0.2 0.81 5.59 8.61 M8x16 0.33 0.98 5.51 0.43 0.39 

Motor 

FDA/FZA28 - FDAZ/FZAZ28 


LA71 11.79 13.96 5.47 5.75 1/2" + 3/4" 20 

LA71Z 12.54 14.70 5.47 5.75 1/2" + 3/4" 20 

LA90S 15.61 18.41 6.85 6.42 1/2" + 3/4" 42 

LA90Z 17.38 20.18 6.85 6.42 1/2" + 3/4" 49 


5 - 84 

FA 510 

FAZ 510 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


FDA/FZA28 

FDAZ/FZAZ28 


FA 510 

FAZ 510 

[mm] 


BD AK AJ BB TAP BF U UF VC VG VH VL M BOLT UY Y EB EH 

102 74 86 3 M8x16 25,4 40 104 89 39 70 3/8“-1 3/4“UNC 28,55 6,35 40 107 

Gearcase 

F E JA A GB SA FA DB J B BS BA AD OA TAP H XF FJ FH MC DIA GO 

65 100 81 119 87,5 60 31 99 19 97 5 20,5 142 218,8 M8x16 8,5 25 140 11 10 

Motor 

FDA/FZA28 - FDAZ/FZAZ28 


LA71 299.5 354.5 139 146 1/2" + 3/4" 9 

LA71Z 318.5 373.5 139 146 1/2" + 3/4" 9 

LA90S 396.5 467.5 174 163 1/2" + 3/4" 19 

LA90Z 441.5 512.5 174 163 1/2" + 3/4" 22 


5 - 85




FDAF/FZAF28 FAF 510 

[inch] 

Flange 

BD AK GA AJ D3 BB AH BA BF 

4.72 3.15 0.31 3.94 0 0.12 0.79 0.26 1.59 

6.3 4.3 0.35 5.12 5.35 0.14 0.79 0.35 1.59 

Output Shaft 

U UF VC VG VH VL M BOLT UY Y EB EH 

1 1.575 4.094 3.504 1.547 2.76 3/8-1 3/4UNC 1.124 0.25 1.575 4.21 

Gearcase 


2.56 3.94 3.19 4.69 3.44 2.36 1.22 3.9 0.75 3.82 0.98 5.59 8.61 M8x16 1.12 0.39 

Motor 

FDAF/FZAF28 


LA71 11.79 13.96 5.47 5.75 1/2" + 3/4" 20 

LA71Z 12.54 14.70 5.47 5.75 1/2" + 3/4" 20 

LA90S 15.61 18.41 6.85 6.42 1/2" + 3/4" 42 

LA90Z 17.38 20.18 6.85 6.42 1/2" + 3/4" 49 


5 - 86 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 

BD AK GA AJ D3 BB AH BA BF 

120 80 8 100 - 3 20 40,5 6,6 

160 110 9 130 136 3,5 20 40,5 9 

Output Shaft 


25,4 40 104 89 40 70 3/8“-1 3/4“UNC 28,55 6,35 40 107 


FDAF/FZAF28 FAF 510 

[mm] 

Gearcase 


65 100 81 119 87,5 60 31 99 19 97 25 142 218,8 M8x16 28,5 10 

Motor 

FDAF/FZAF28 


LA71 318.5 373.5 139 146 1/2" + 3/4" 9 

LA71Z 337.5 392.5 139 146 1/2" + 3/4" 9 

LA90S 415.5 486.5 174 163 1/2" + 3/4" 19 

LA90Z 460.5 531.5 174 163 1/2" + 3/4" 22 


5 - 87




FDZ/FZZ38B FZ 510 

[inch] 

Mounting 


4.72 3.15 3.94 0.12 M8x11 

Output Shaft 


1 1.97 1.5 0.252 3/8-16UNC 1.11 0.25 2.81 

Gearcase 

F BDB E AKB JA AJB A BBB GB SA FA DB 

3.03 4.72 4.53 3.15 3.74 3.94 5.31 0.12 5.24 2.95 1.22 4.53 

J B BS AD OA TAP H TAP BFB XF FJ FH MC DIA GO 

0.79 4.25 0.24 5.91 9.59 M8x11 M8x11 0.41 1.24 5.51 0.43 0.47 

Motor 

FDZ/FZZ38B Weight [lb] 

Motor C CB P AB AA FDZ38 FFZ38B 

LA71 14.84 17.01 5.47 5.75 1/2" + 3/4" 40 37 

LA71Z 15.59 17.76 5.47 5.75 1/2" + 3/4" 40 37 

LA80 16.30 18.80 6.16 6.10 1/2" + 3/4" 51 49 

LA90S 17.52 20.31 6.85 6.42 1/2" + 3/4" 60 60 

LA90Z 19.29 22.09 6.85 6.42 1/2" + 3/4" 60 60 

LA100Z 22.09 25.28 7.68 6.61 2 x 3/4" - 79 


5 - 88 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Mounting 


120 80 100 3 M8x11 

Output Shaft 


25,4 50 38,1 6,401 3/8“-16UNC 28,19 6,35 71,5 



[mm] 

Gearcase 


77 120 115 80 95 100 135 3 133 75 31 115 


20 108 6 150 243,5 M8x11 M8x11 10,5 31,5 140 11 12 

Motor 

FDZ/FZZ38B Weight [kg] 

Motor C CB P AB AA FDZ38B FZZ38B 

LA71 377 432 139 146 1/2" + 3/4" 18 17 

LA71Z 396 451 139 146 1/2" + 3/4" 18 17 

LA80 414 477.5 156.5 155 1/2" + 3/4" 23 22 

LA90S 445 516 174 163 1/2" + 3/4" 27 27 

LA90Z 490 561 174 163 1/2" + 3/4" 27 27 

LA100Z 561 642 195 168 2 x 3/4" - 36 


5 - 89




FDF/FZF38B FF 510 

[inch] 

Flange 

BD AK GA AJ BB BA BF 

6.3 4.33 0.39 5.12 0.14 3.76 0.35 

Output Shaft 


1 1.97 1.5 0.252 3/8-16UNC 1.11 0.25 1.97 

Gearcase 

F BDB E AKB JA AJB A BBB GB SA 

3.03 4.72 4.53 3.15 3.74 3.94 5.31 0.12 5.24 2.95 

FA DB J B GL AD OA TAP H TAP BFB XF 

1.22 4.53 0.79 4.25 1.18 5.91 9.59 M8x11 M8x11 1.36 

Motor 

FDF/FZF38B Weight [lb] 

Motor C CB P AB AA FDF38B FZF38B 

LA71 15.79 17.95 5.47 5.75 1/2" + 3/4" 44 42 

LA71Z 16.54 18.70 5.47 5.75 1/2" + 3/4" 44 42 

LA80 17.24 19.74 6.16 6.10 1/2" + 3/4" 55 53 

LA90S 18.46 21.26 6.85 6.42 1/2" + 3/4" 64 64 

LA90Z 20.24 23.03 6.85 6.42 1/2" + 3/4" 64 64 

LA100Z 23.03 26.22 7.68 6.61 2 x 3/4" - 84 


5 - 90 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


160 110 10 130 3,5 95,5 9 

Output Shaft 


25,4 50 38,1 6,401 3/8“-16UNC 28,19 6,35 50 

Gearcase 

F BDB E AKB JA AJB A BBB GB SA 

77 120 115 80 95 100 135 3 133 75 



[mm] 

FA DB J B GL AD OA TAP H TAP BFB XF 

31 115 20 108 30 150 243,5 M8x11 M8x11 34,5 

Motor 



LA71 401 456 139 146 1/2" + 3/4" 20 19 

LA71Z 420 475 139 146 1/2" + 3/4" 20 19 

LA80 438 501.5 156.5 155 1/2" + 3/4" 25 24 

LA90S 469 540 174 163 1/2" + 3/4" 29 29 

LA90Z 514 585 174 163 1/2" + 3/4" 29 29 

LA100Z 585 666 195 168 2 x 3/4" - 38 


5 - 91



Shaft mounted 


FDA/FZA38B 

FDAZ/FZAZ38B 



4.72 3.15 3.94 0.12 M8x11 1.25 1.772 4.72 4.016 1.38 3.54 3/8-16UNC 1.38 0.25 1.732 4.84 

Gearcase 


3.03 4.72 4.53 3.15 3.74 3.94 5.31 0.12 5.24 2.95 1.22 4.53 

Motor 

FDA/FZA38B - FDAZ/FZAZ38B Weight [lb] 

Motor C CB P AB AA FDA38B-FDAZ38B FZA38B-FZAZ38B 

LA71 14.84 17.01 5.47 5.75 1/2" + 3/4" 35 35 

LA71Z 15.59 17.76 5.47 5.75 1/2" + 3/4" 35 35 

LA80 16.30 18.80 6.16 6.10 1/2" + 3/4" 46 46 

LA90S 17.52 20.31 6.85 6.42 1/2" + 3/4" 57 57 

LA90Z 19.29 22.09 6.85 6.42 1/2" + 3/4" 57 57 

LA100Z 22.09 25.28 7.68 6.61 2 x 3/4" - 77 

5 - 92 

FA 510 

FAZ 510 

[inch] 

J B BS BA AD OA TAP H TAP BFB XF FJ FH MC DIA GO 

0.79 4.25 0.24 0.85 5.91 9.59 M8x11 M8x11 0.41 1.24 5.51 0.43 0.47 


(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


FDA/FZA38B 

FDAZ/FZAZ38B 


FA 510 

FAZ 510 

[mm] 



120 80 100 3 M8x11 31,75 45 120 102 35 90 3/8“-16UNC 35,05 6,35 44 123 

Gearcase 


77 120 115 80 95 100 135 3 133 75 31 115 

J B BS BA AD OA TAP H TAP BFB XF FJ FH MC DIA GO 

20 108 6 21,5 150 243,5 M8x11 M8x11 10,5 31,5 140 11 12 

Motor 

FDA/FZA38B - FDAZ/FZAZ38B Weight [kg] 


LA71 377 432 139 146 1/2" + 3/4" 16 16 

LA71Z 396 451 139 146 1/2" + 3/4" 16 16 

LA80 414 477.5 156.5 155 1/2" + 3/4" 21 21 

LA90S 445 516 174 163 1/2" + 3/4" 26 26 

LA90Z 490 561 174 163 1/2" + 3/4" 26 26 

LA100Z 561 642 195 168 2 x 3/4" - 35 


5 - 93




FDAF/FZAF38B FAF 510 

[inch] 

Flange 

BD AK GA AJ BB AH BF BA 

6.3 4.33 0.39 5.12 0.14 0.94 0.35 1.79 

Output Shaft 


1.25 1.772 4.72 4.016 1.38 3.54 3/8-16UNC 1.38 0.25 1.732 4.84 

Gearcase 

F BDB E AKB JA AJB A BBB GB SA FA DB J B GL AD OA TAP H TAP BFB XF 

3.03 4.72 4.53 3.15 3.74 3.94 5.31 0.12 5.24 2.95 1.22 4.53 0.79 4.25 1.18 5.91 9.59 M8x11 M8x11 1.36 

Motor 

FDAF/FZAF38B Weight [lb] 

Motor C CB P AB AA FDAF38B FZAF38B 

LA71 15.79 17.95 5.47 5.75 1/2" + 3/4" 40 40 

LA71Z 16.54 18.70 5.47 5.75 1/2" + 3/4" 40 40 

LA80 17.24 19.74 6.16 6.10 1/2" + 3/4" 51 51 

LA90S 18.46 21.26 6.85 6.42 1/2" + 3/4" 62 62 

LA90Z 20.24 23.03 6.85 6.42 1/2" + 3/4" 62 62 

LA100Z 23.03 26.22 7.68 6.61 2 x 3/4" - 82 


5 - 94 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 

BD AK GA AJ BB AH BA BF 

160 110 10 130 3,5 24 45,5 9 

Output Shaft 


31,75 45 120 102 35 90 3/8“-16UNC 35,05 6,35 44 123 



[mm] 

Gearcase 


77 120 115 80 95 100 135 3 133 75 31 115 20 108 30 150 243,5 M8x11 M8x11 34,5 

Motor 

FDAF/FZAF38B Weight [kg] 


LA71 401 456 139 146 1/2" + 3/4" 18 18 

LA71Z 420 475 139 146 1/2" + 3/4" 18 18 

LA80 438 501.5 156.5 155 1/2" + 3/4" 23 23 

LA90S 469 540 174 163 1/2" + 3/4" 28 28 

LA90Z 514 585 174 163 1/2" + 3/4" 28 28 

LA100Z 585 666 195 168 2 x 3/4" - 37 


5 - 95





[inch] 

Mounting 


5.24 3.74 4.53 0.12 M10x17 

Output Shaft 


1.25 2.36 1.875 0.133 3/8-16UNC 1.36 0.25 3.48 

Gearcase 


3.66 5.24 5.71 3.74 4.49 4.53 6.65 0.12 4.82 3.58 1.69 5.91 


0.94 5.35 0.28 7.09 12.22 M10x13 M10x17 0.43 1.26 7.28 0.55 0.47 

Motor 



LA71 15.43 17.60 5.47 5.75 1/2" + 3/4" 55 55 

LA71Z 16.18 18.35 5.47 5.75 1/2" + 3/4" 55 55 

LA80 16.89 19.39 6.16 6.10 1/2" + 3/4" 66 66 

LA90S 18.11 20.91 6.85 6.42 1/2" + 3/4" 77 77 

LA90Z 19.88 22.68 6.85 6.42 1/2" + 3/4" 77 77 

LA100Z 22.68 25.87 7.68 6.61 2 x 3/4" 97 97 

LA112Z 22.19 25.37 8.62 7.13 2 x 3/4" - 119 


5 - 96 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Mounting 

BD AK AJ BB BF 

133 95 115 3 M10x17 

Output Shaft 


31,75 60 47,625 3,378 3/8“-16UNC 34,54 6,35 88,5 



[mm] 

Gearcase 


93 133 145 95 114 115 169 3 122,5 91 43 150 


24 136 7 180 310,5 M10x13 M10x17 11 32 185 14 12 

Motor 



LA71 392 447 139 146 1/2" + 3/4" 25 25 

LA71Z 411 466 139 146 1/2" + 3/4" 25 25 

LA80 429 492.5 156.5 155 1/2" + 3/4" 30 30 

LA90S 460 531 174 163 1/2" + 3/4" 35 35 

LA90Z 505 576 174 163 1/2" + 3/4" 35 35 

LA100Z 576 657 195 168 2 x 3/4" 44 44 

LA112Z 563.5 644.5 219 181 2 x 3/4" - 54 


5 - 97





[inch] 

Flange 


7.87 5.12 0.47 6.5 0.14 4.47 0.43 

Output Shaft 


1.25 2.36 1.875 0.133 3/8-16UNC 1.36 0.25 2.36 

GearcaseMotor 


3.66 5.24 5.71 3.74 4.49 4.53 6.65 0.12 4.82 3.58 1.69 5.91 0.94 5.35 1.26 7.09 12.22 M10x13 M10x17 1.42 



LA71 16.42 18.58 5.47 5.75 1/2" + 3/4" 62 62 

LA71Z 17.17 19.33 5.47 5.75 1/2" + 3/4" 62 62 

LA80 17.87 20.35 6.16 6.10 1/2" + 3/4" 73 73 

LA90S 19.09 21.89 6.85 6.42 1/2" + 3/4" 84 84 

LA90Z 20.87 23.66 6.85 6.42 1/2" + 3/4" 84 84 

LA100Z 23.66 26.85 7.68 6.61 2 x 3/4" 104 104 

LA112Z 23.17 26.36 8.62 7.13 2 x 3/4" - 126 


5 - 98 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


200 130 12 165 3,5 113,5 11 

Output Shaft 


31,75 60 47,625 3,378 3/8“-16UNC 34,54 6,35 60 



[mm] 

Gearcase 


93 133 145 95 114 115 169 3 122,5 91 43 150 24 136 32 180 310,5 M10x13 M10x17 36 

Motor 

FDF/FZF48B Weight [kg] 


LA71 417 472 139 146 1/2" + 3/4" 28 28 

LA71Z 436 491 139 146 1/2" + 3/4" 28 28 

LA80 454 517 156.5 155 1/2" + 3/4" 33 33 

LA90S 485 556 174 163 1/2" + 3/4" 38 38 

LA90Z 530 601 174 163 1/2" + 3/4" 38 38 

LA100Z 601 682 195.0 168 2 x 3/4" 47 47 

LA112Z 588.5 669.5 219 181 2 x 3/4" - 57 


5 - 99



Shaft mounted 


FDA/FZA48B 

FDAZ/FZAZ48B 



5.24 3.74 4.53 0.12 M10x17 1.375 2.165 5.91 5.039 1.37 4.53 3/8-16UNC 1.53 0.31 2.283 6.02 

Gearcase 

F BDB E AKB JA AJB A BBB GB SA FA DB J 

3.66 5.24 5.71 3.74 4.49 4.53 6.65 0.12 4.82 3.58 1.69 5.91 0.94 

Motor 



LA71 15.43 17.60 5.47 5.75 1/2" + 3/4" 53 53 

LA71Z 16.18 18.35 5.47 5.75 1/2" + 3/4" 53 53 

LA80 16.89 19.39 6.16 6.10 1/2" + 3/4" 64 64 

LA90S 18.11 20.91 6.85 6.42 1/2" + 3/4" 75 75 

LA90Z 19.88 22.68 6.85 6.42 1/2" + 3/4" 75 75 

LA100Z 22.68 25.87 7.68 6.61 2 x 3/4" 95 93 

LA112Z 22.19 25.37 8.62 7.13 2 x 3/4" - 117 


5 - 100 

FA 510 

FAZ 510 

[inch] 

B BS BA AD OA TAP H TAP BFB XF FJ FH MC DIA GO 

5.35 0.28 1.12 7.09 12.22 M10x13 M10x17 0.43 1.26 7.28 0.55 0.47 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


FDA/FZA48B 

FDAZ/FZAZ48B 


FA 510 

FAZ 510 

[mm] 



133 95 115 3 M10x17 34,925 55 150 128 35 115 3/8“-16UNC 38,86 7,874 58 153 

Gearcase 


93 133 145 95 114 115 169 3 122,5 91 43 150 24 


136 7 28,5 180 310,5 M10x13 M10x17 11 32 185 14 12 

Motor 

FDA/FZA48B - FDAZ/FZAZ48B Weight [kg] 


LA71 392 447 139 146 1/2" + 3/4" 24 24 

LA71Z 411 466 139 146 1/2" + 3/4" 24 24 

LA80 429 492.5 156.5 155 1/2" + 3/4" 29 29 

LA90S 460 531 174 163 1/2" + 3/4" 34 34 

LA90Z 505 576 174 163 1/2" + 3/4" 34 34 

LA100Z 576 657 195 168 2 x 3/4" 43 42 

LA112Z 563.5 644.5 219 181 2 x 3/4" - 53 


5 - 101





[inch] 

Flange 


7.87 5.12 0.47 6.5 0.14 0.98 0.43 2.11 

Output Shaft 


1.375 2.165 5.91 5.039 1.37 4.53 3/8-16UNC 1.53 0.31 2.283 6.02 

Gearcase 


3.66 5.24 5.71 3.74 4.49 4.53 6.65 0.12 4.82 3.58 1.69 5.91 0.94 5.35 1.26 7.09 12.22 M10x13 M10x17 1.42 

Motor 



LA71 16.42 18.58 5.47 5.75 1/2" + 3/4" 60 60 

LA71Z 17.17 19.33 5.47 5.75 1/2" + 3/4" 60 60 

LA80 17.87 20.35 6.16 6.10 1/2" + 3/4" 71 71 

LA90S 19.09 21.89 6.85 6.42 1/2" + 3/4" 82 79 

LA90Z 20.87 23.66 6.85 6.42 1/2" + 3/4" 82 79 

LA100Z 23.66 26.85 7.68 6.61 2 x 3/4" 101 99 

LA112Z 23.17 26.36 8.62 7.13 2 x 3/4" - 123 


5 - 102 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


200 130 12 165 3,5 25 53,5 11 

Output Shaft 


34,925 55 150 128 35 115 3/8“-16UNC 38,86 7,874 58 153 



[mm] 

Gearcase 


93 133 145 95 114 115 169 3 122,5 91 43 150 24 136 32 180 310,5 M10x13 M10x17 36 

Motor 



LA71 417 472 139 146 1/2" + 3/4" 27 27 

LA71Z 436 491 139 146 1/2" + 3/4" 27 27 

LA80 454 517 156.5 155 1/2" + 3/4" 32 32 

LA90S 485 556 174 163 1/2" + 3/4" 37 36 

LA90Z 530 601 174 163 1/2" + 3/4" 37 36 

LA100Z 601 682 195 168 2 x 3/4" 46 45 

LA112Z 588.5 669.5 219 181 2 x 3/4" - 56 


5 - 103





[inch] 

Mounting 


6.06 4.33 5.12 0.14 M12x21 

Output Shaft 


1.625 3.15 2.75 0.065 5/8-11UNC 1.79 0.375 4.49 

Gearcase 


4.41 6.06 7.48 4.33 5.35 5.12 8.5 0.14 5.45 4.33 2.36 7.09 


1.02 6.5 0.3 8.82 14.84 M12x17 M12x21 0.63 1.61 8.58 0.55 0.63 

Motor 



LA71 16.04 18.21 5.47 5.75 1/2" + 3/4" 88 - 

LA71Z 16.79 18.96 5.47 5.75 1/2" + 3/4" 88 - 

LA80 17.50 20.00 6.16 6.10 1/2" + 3/4" 99 99 

LA90S 18.72 21.52 6.85 6.42 1/2" + 3/4" 110 110 

LA90Z 20.49 23.29 6.85 6.42 1/2" + 3/4" 110 110 

LA100Z 23.29 26.48 7.68 6.61 2 x 3/4" 130 130 

LA112Z 22.78 25.96 8.62 7.13 2 x 3/4" - 154 

LA132SP 24.11 28.13 10.20 7.68 1” + 3/4” - 176 

LA132ZMP 25.93 29.94 10.20 7.68 1” + 3/4” - 196 


5 - 104 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Mounting 


154 110 130 3,5 M12x21 

Output Shaft 


41,275 80 69,85 1,651 5/8“-11UNC 45,47 9,525 114 



[mm] 

Gearcase 


112 154 190 110 136 130 216 3,5 138,5 110 60 180 


26 165 7,5 224 377 M12x17 M12x21 16 41 218 14 16 

Motor 



LA71 407.5 462.5 139 146 1/2" + 3/4" 40 - 

LA71Z 426.5 481.5 139 146 1/2" + 3/4" 40 - 

LA80 444.5 508 156.5 155 1/2" + 3/4" 45 45 

LA90S 475.5 546.5 174 163 1/2" + 3/4" 50 50 

LA90Z 520.5 591.5 174 163 1/2" + 3/4" 50 50 

LA100Z 591.5 672.5 195 168 2 x 3/4" 59 59 

LA112Z 578.5 659.5 219 181 2 x 3/4" - 70 

LA132SP 612.5 714.5 259 195 1" + 3/4" - 80 

LA132ZMP 658.5 760.5 259 195 1" + 3/4" - 89 


5 - 105





[inch] 

Flange 


9.84 7.09 0.59 8.46 0.16 5.39 0.53 

Output Shaft 


1.625 3.15 2.76 0.065 5/8-11UNC 1.79 0.38 3.15 

Gearcase 


4.41 6.06 7.48 4.33 5.35 5.12 8.5 0.14 5.45 4.33 2.36 7.09 1.02 6.5 1.2 8.82 14.84 M12x17 M12x21 1.54 

Motor 



LA71 16.95 19.11 5.47 5.75 1/2" + 3/4" 106 - 

LA71Z 17.70 19.86 5.47 5.75 1/2" + 3/4" 106 - 

LA80 18.41 20.91 6.16 6.10 1/2" + 3/4" 117 117 

LA90S 19.63 22.42 6.85 6.42 1/2" + 3/4" 126 126 

LA90Z 21.40 24.19 6.85 6.42 1/2" + 3/4" 126 126 

LA100Z 24.19 27.38 7.68 6.61 2 x 3/4" 148 148 

LA112Z 23.68 26.87 8.62 7.13 2 x 3/4" - 172 

LA132SP 25.02 29.04 10.20 7.68 1" + 3/4" - 194 

LA132ZMP 26.83 30.85 10.20 7.68 1" + 3/4" - 214 


5 - 106 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


250 180 15 215 4 137 13,5 

Output Shaft 


41,275 80 70,104 1,65 5/8“-11UNC 45,47 9,652 80 



[mm] 

Gearcase 


112 154 190 110 136 130 216 3,5 138,5 110 60 180 26 165 30,5 224 377 M12x17 M12x21 39 

Motor 



LA71 430.5 485.5 139 146 1/2" + 3/4" 48 - 

LA71Z 449.5 504.5 139 146 1/2" + 3/4" 48 - 

LA80 467.5 531 156.5 155 1/2" + 3/4" 53 53 

LA90S 498.5 569.5 174 163 1/2" + 3/4" 57 57 

LA90Z 543.5 614.5 174 163 1/2" + 3/4" 57 57 

LA100Z 614.5 695.5 195 168 2 x 3/4" 67 67 

LA112Z 601.5 682.5 219 181 2 x 3/4" - 78 

LA132SP 635.5 737.5 259 195 1" + 3/4" - 88 

LA132ZMP 681.5 783.5 259 195 1" + 3/4" - 97 


5 - 107



Shaft mounted 


FDA/FZA68B 

FDAZ/FZAZ68B 



6.06 4.33 5.12 0.14 M12x21 1.5 2.559 7.09 5.906 1.93 5.31 3/8-16UNC 1.68 0.38 2.717 7.2 

Gearcase 


4.41 6.06 7.48 4.33 5.35 5.12 8.5 0.14 5.45 4.33 2.36 7.09 1.02 

Motor 



LA71 16.04 18.21 5.47 5.75 1/2" + 3/4" 82 - 

LA71Z 16.79 18.96 5.47 5.75 1/2" + 3/4" 82 - 

LA80 17.50 20.00 6.16 6.10 1/2" + 3/4" 93 93 

LA90S 18.72 21.52 6.85 6.42 1/2" + 3/4" 101 101 

LA90Z 20.49 23.29 6.85 6.42 1/2" + 3/4" 101 101 

LA100Z 23.29 26.48 7.68 6.61 2 x 3/4" 121 121 

LA112Z 22.78 25.96 8.62 7.13 2 x 3/4" - 148 

LA132SP 24.11 28.13 10.20 7.68 1" + 3/4" - 170 

LA132ZMP 25.93 29.94 10.20 7.68 1" + 3/4" - 190 

5 - 108 

FA 510 

FAZ 510 

[inch] 


6.5 0.3 1.34 8.82 14.84 M12x17 M12x21 0.63 1.61 8.58 0.55 0.63 


(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


FDA/FZA68B 

FDAZ/FZAZ68B 


FA 510 

FAZ 510 

[mm] 


BD AK AJ BB BF U UF VC VG VH VL M BOLT UY Y EB EH 

154 110 130 3,5 M12x21 38,1 65 180 150 49 135 3/8“-16UNC 42,67 9,652 69 183 

Gearcase 


112 154 190 110 136 130 216 3,5 138,5 110 60 180 26 


165 7,5 34 224 377 M12x17 M12x21 16 41 218 14 16 

Motor 

FDA/FZA68B-FDAZ/FZAZ68B Weight [kg] 


LA71 407.5 462.5 139 146 1/2" + 3/4" 37 - 

LA71Z 426.5 481.5 139 146 1/2" + 3/4" 37 - 

LA80 444.5 508 156.5 155 1/2" + 3/4" 42 42 

LA90S 475.5 546.5 174 163 1/2" + 3/4" 46 46 

LA90Z 520.5 591.5 174 163 1/2" + 3/4" 46 46 

LA100Z 591.5 672.5 195 168 2 x 3/4" 55 55 

LA112Z 578.5 659.5 219 181 2 x 3/4" - 67 

LA132SP 612.5 714.5 259 195 1" + 3/4" - 77 

LA132ZMP 658.5 760.5 259 195 1" + 3/4" - 86 


5 - 109





[inch] 

Flange 


9.84 7.09 0.59 8.46 0.16 0.91 0.53 2.24 

Output Shaft 


1.5 2.559 7.09 5.906 1.93 5.31 3/8-16UNC 1.68 0.38 2.717 7.2 

Gearcase 


4.41 6.06 7.48 4.33 5.35 5.12 8.5 0.14 5.45 4.33 2.36 7.09 1.02 6.5 1.2 8.82 14.84 M12x17 M12x21 1.54 

Motor 



LA71 16.95 19.11 5.47 5.75 1/2" + 3/4" 99 - 

LA71Z 17.70 19.86 5.47 5.75 1/2" + 3/4" 99 - 

LA80 18.41 20.91 6.16 6.10 1/2" + 3/4" 110 110 

LA90S 19.63 22.42 6.85 6.42 1/2" + 3/4" 119 119 

LA90Z 21.40 24.19 6.85 6.42 1/2" + 3/4" 119 119 

LA100Z 24.19 27.38 7.68 6.61 2 x 3/4" 139 139 

LA112Z 23.68 26.87 8.62 7.13 2 x 3/4" - 165 

LA132SP 25.02 29.04 10.20 7.68 1" + 3/4" - 187 

LA132ZMP 26.83 30.85 10.20 7.68 1" + 3/4" - 207 


5 - 110 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange 


250 180 15 215 4 23 57 13,5 

Output Shaft 


38,1 65 180 150 49 135 3/8“-16UNC 42,67 9,652 69 183 



[mm] 

Gearcase 


112 154 190 110 136 130 216 3,5 138,5 110 60 180 26 165 30,5 224 377 M12x17 M12x21 39 

Motor 



LA71 430.5 485.5 139 146 1/2" + 3/4" 45 - 

LA71Z 449.5 504.5 139 146 1/2" + 3/4" 45 - 

LA80 467.5 531 156.5 155 1/2" + 3/4" 50 50 

LA90S 498.5 569.5 174 163 1/2" + 3/4" 54 54 

LA90Z 543.5 614.5 174 163 1/2" + 3/4" 54 54 

LA100Z 614.5 695.5 195 168 2 x 3/4" 63 63 

LA112Z 601.5 682.5 219 181 2 x 3/4" - 75 

LA132SP 635.5 737.5 259 195 1" + 3/4" - 85 

LA132ZMP 681.5 783.5 259 195 1" + 3/4" - 94 


5 - 111





[inch] 


BD AK AJ BB TAP BF U V V3 V0 TAP M UY Y BA 

7.48 5.12 6.5 0.14 M12x21 2 3.94 3.5 0.004 3/4-10UNC 2.22 0.5 5.31 

Gearcase 

F BDB A3 E AKB B3 JA AJB E3 A BBB F3 GB SA FA 

5.51 7.48 5.91 10.63 5.12 4.33 6.61 6.5 7.05 12.11 0.14 10.16 6.89 5.2 3.94 

DB BE J JD B BS AD OA TAP H TAP BFB S7 XF FJ FH MC DIA GO 

9.06 5.12 1.38 1.2 7.6 0.33 10.39 18.52 M16x22 M12x21 M16x22 0.57 1.97 10.94 0.87 0.79 

Motor 



LA71 17.19 19.35 5.47 5.75 1/2" + 3/4" 154 - 

LA71Z 17.93 20.10 5.47 5.75 1/2" + 3/4" 154 - 

LA80 18.64 21.14 6.16 6.10 1/2" + 3/4" 165 165 

LA90S 19.86 22.66 6.85 6.42 1/2" + 3/4" 176 176 

LA90Z 21.63 23.72 6.85 6.42 1/2" + 3/4" 176 176 

LA100Z 24.43 27.62 7.68 6.61 2 x 3/4" 196 196 

LA112Z 23.84 27.03 8.62 7.13 2 x 3/4" 221 223 

LA132SP 25.10 29.11 10.20 7.68 1" + 3/4" 249 251 

LA132ZMP 26.91 30.93 10.20 7.68 1" + 3/4" 271 271 

LA160MP 29.13 33.80 12.34 8.94 1" + 3/4" - 324 

LA160ZLP 31.02 35.69 12.34 8.94 1" + 3/4" - 324 


5 - 112 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



190 130 165 3,5 M12x21 50,8 100 88,9 0,102 3/4“-10UNC 56,39 12,7 135 

Gearcase 


140 190 150 270 130 110 168 165 179 307,5 3,5 258 175 132 100 


230 130 35 30,5 193 8,5 264 470,5 M16x22 M12x21 M16x22 14,5 50 278 22 20 

Motor 



LA71 436.5 491.5 139 146 1/2" + 3/4" 70 - 

LA71Z 455.5 510.5 139 146 1/2" + 3/4" 70 - 

LA80 473.5 537 156.5 155 1/2" + 3/4" 75 75 

LA90S 504.5 575.5 174 163 1/2" + 3/4" 80 80 

LA90Z 549.5 602.5 174 163 1/2" + 3/4" 80 80 

LA100Z 620.5 701.5 195 168 2 x 3/4" 89 89 

LA112Z 605.5 686.5 219 181 2 x 3/4" 100 101 

LA132SP 637.5 739.5 259 195 1" + 3/4" 113 114 

LA132ZMP 683.5 785.5 259 195 1" + 3/4" 123 123 

LA160MP 740 858.5 313.5 227 1" + 3/4" - 147 

LA160ZLP 788 906.5 313.5 227 1" + 3/4" - 147 


5 - 113





[inch] 


BD AK GA AJ BB BA BF U V V3 V0 TAP M UY Y AM 

11.81 9.06 0.63 10.43 0.16 6.77 0.53 2 3.94 3.5 0.004 3/4-10UNC 2.22 0.5 3.94 

Gearcase 

F BDB A3 E AKB B3 JA AJB A BBB F3 GB SA 

5.51 7.48 5.91 10.63 5.12 4.33 6.61 6.5 12.11 0.14 10.16 6.89 5.2 

FA DB BE J JD B GL AD OA TAP H TAP BFB S7 XF 

3.94 9.06 6.57 1.38 1.2 7.6 1.79 10.39 18.52 M16x22 M12x21 M16x22 2.03 

Motor 



LA71 18.64 20.81 5.47 5.75 1/2" + 3/4" 179 - 

LA71Z 19.39 21.56 5.47 5.75 1/2" + 3/4" 179 - 

LA80 20.10 22.60 6.16 6.10 1/2" + 3/4" 190 190 

LA90S 21.32 24.11 6.85 6.42 1/2" + 3/4" 201 201 

LA90Z 23.09 25.89 6.85 6.42 1/2" + 3/4" 201 201 

LA100Z 25.89 29.07 7.68 6.61 2 x 3/4" 221 223 

LA112Z 25.30 28.48 8.62 7.13 2 x 3/4" 245 247 

LA132SP 26.56 30.57 10.20 7.68 1" + 3/4" 273 276 

LA132ZMP 28.37 32.38 10.20 7.68 1" + 3/4" 295 295 

LA160MP 30.59 35.26 12.34 8.94 1" + 3/4" - 348 

LA160ZLP 32.48 37.15 12.34 8.94 1" + 3/4" - 348 


5 - 114 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



300 230 16 265 4 172 13,5 50,8 100 88,9 0,102 3/4“-10UNC 56,39 12,7 100 

Gearcase 


140 190 150 270 130 110 168 165 307,5 3,5 258 175 132 


100 230 167 35 30,5 193 45,5 264 470,5 M16x22 M12x21 M16x22 51,5 

Motor 



LA71 473.5 528.5 139 146 1/2" + 3/4" 81 - 

LA71Z 492.5 547.5 139 146 1/2" + 3/4" 81 - 

LA80 510.5 574 156.5 155 1/2" + 3/4" 86 86 

LA90S 541.5 612.5 174 163 1/2" + 3/4" 91 91 

LA90Z 586.5 657.5 174 163 1/2" + 3/4" 91 91 

LA100Z 657.5 738.5 195 168 2 x 3/4" 100 101 

LA112Z 642.5 723.5 219 181 2 x 3/4" 111 112 

LA132SP 674.5 776.5 259 195 1" + 3/4" 124 125 

LA132ZMP 720.5 822.5 259 195 1" + 3/4" 134 134 

LA160MP 777 895.5 313.5 227 1" + 3/4" - 158 

LA160ZLP 825 943.5 313.5 227 1" + 3/4" - 158 


5 - 115



Shaft mounted 


FDA/FZA88B 

FDAZ/FZAZ88B 



7.48 5.12 6.5 0.14 M12x21 2 3.15 8.27 7.087 1.62 6.5 3/4-10UNC 2.23 0.5 3.071 8.39 

Gearcase 

F BDB A3 E AKB B3 JA AJB E3 A BBB F3 GB SA FA DB 

5.51 7.48 5.91 10.63 5.12 4.33 6.61 6.5 7.05 12.11 0.14 10.16 6.89 5.2 3.94 9.06 

Motor 

FDA/FZA88B-FDAZ/FZAZ88B Weight [lb] 


LA71 17.19 19.35 5.47 5.75 1/2" + 3/4" 137 - 

LA71Z 17.93 20.10 5.47 5.75 1/2" + 3/4" 137 - 

LA80 18.64 21.14 6.16 6.10 1/2" + 3/4" 148 148 

LA90S 19.86 22.66 6.85 6.42 1/2" + 3/4" 157 159 

LA90Z 21.63 23.72 6.85 6.42 1/2" + 3/4" 157 159 

LA100Z 24.43 27.62 7.68 6.61 2 x 3/4" 179 179 

LA112Z 23.84 27.03 8.62 7.13 2 x 3/4" 203 205 

LA132SP 25.10 29.11 10.20 7.68 1" + 3/4" 232 234 

LA132ZMP 26.91 30.93 10.20 7.68 1" + 3/4" 251 254 

LA160MP 29.13 33.80 12.34 8.94 1" + 3/4" - 306 

LA160ZLP 31.02 35.69 12.34 8.94 1" + 3/4" - 306 


5 - 116 

FA 510 

FAZ 510 

[inch] 

BE J JD B BS BA AD OA TAP H TAP BFB S7 XF FJ FH MC DIA GO 

1.18 1.38 1.2 7.6 0.33 1.38 10.39 18.52 M16x22 M12x21 M16x22 0.57 1.97 10.94 0.87 0.79 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


FDA/FZA88B 

FDAZ/FZAZ88B 


FA 510 

FAZ 510 

[mm] 



190 130 165 3,5 M12x21 50,8 80 210 180 41 165 3/4“-10UNC 56,64 12,7 78 213 

Gearcase 


140 190 150 270 130 110 168 165 179 307,5 3,5 258 175 132 100 230 


30 35 30,5 193 8,5 35 264 470,5 M16x22 M12x21 M16x22 14,5 50 278 22 20 

Motor 



LA71 436.5 491.5 139 146 1/2" + 3/4" 62 - 

LA71Z 455.5 510.5 139 146 1/2" + 3/4" 62 - 

LA80 473.5 537 156.5 155 1/2" + 3/4" 67 67 

LA90S 504.5 575.5 174 163 1/2" + 3/4" 71 72 

LA90Z 549.5 602.5 174 163 1/2" + 3/4" 71 72 

LA100Z 620.5 701.5 195 168 2 x 3/4" 81 81 

LA112Z 605.5 686.5 219 181 2 x 3/4" 92 93 

LA132SP 637.5 739.5 259 195 1" + 3/4" 105 106 

LA132ZMP 683.5 785.5 259 195 1" + 3/4" 114 115 

LA160MP 740 858.5 313.5 227 1" + 3/4" - 139 

LA160ZLP 788 906.5 313.5 227 1" + 3/4" - 139 


5 - 117





[inch] 


BD AK GA AJ BB AH BF BA U UF VC VG VH VL M BOLT UY Y EB EH 

11.81 9.06 0.63 10.43 0.16 1.46 0.53 2.83 2 3.15 8.27 7.087 1.62 6.5 3/4-10UNC 2.23 0.5 3.071 8.39 

Gearcase 

F BDB A3 E AKB B3 JA AJB E3 A BBB F3 GB 

5.51 7.48 5.91 10.63 5.12 4.33 6.61 6.5 7.05 12.11 0.14 10.16 6.89 

SA FA DB BE J JD B GL AD OA TAP H TAP BFB S7 XF 

5.2 3.94 9.06 2.64 1.38 1.2 7.6 1.79 10.39 18.52 M16x22 M12x21 M16x22 2.03 

Motor 



LA71 18.64 20.81 5.47 5.75 1/2" + 3/4" 161 - 

LA71Z 19.39 21.56 5.47 5.75 1/2" + 3/4" 161 - 

LA80 20.10 22.60 6.16 6.10 1/2" + 3/4" 172 172 

LA90S 21.32 24.11 6.85 6.42 1/2" + 3/4" 181 183 

LA90Z 23.09 25.89 6.85 6.42 1/2" + 3/4" 181 183 

LA100Z 25.89 29.07 7.68 6.61 2 x 3/4" 203 203 

LA112Z 25.30 28.48 8.62 7.13 2 x 3/4" 227 229 

LA132SP 26.56 30.57 10.20 7.68 1" + 3/4" 256 258 

LA132ZMP 28.37 32.38 10.20 7.68 1" + 3/4" 276 278 

LA160MP 30.59 35.26 12.34 8.94 1" + 3/4" - 331 

LA160ZLP 32.48 37.15 12.34 8.94 1" + 3/4" - 331 


5 - 118 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 


BD AK GA AJ BB AH BA BF U UF VC VG VH VL M BOLT UY Y EB EH 

300 230 16 265 4 37 72 13,5 50,8 80 210 180 41 165 3/4“-10UNC 56,64 12,7 78 213 

Gearcase 


140 190 150 270 130 110 168 165 179 307,5 3,5 258 175 


132 100 230 67 35 30,5 193 45,5 264 470,5 M16x22 M12x21 M16x22 51,5 

Motor 



LA71 473.5 528.5 139 146 1/2" + 3/4" 73 - 

LA71Z 492.5 547.5 139 146 1/2" + 3/4" 73 - 

LA80 510.5 574 156.5 155 1/2" + 3/4" 78 78 

LA90S 541.5 612.5 174 163 1/2" + 3/4" 82 83 

LA90Z 586.5 657.5 174 163 1/2" + 3/4" 82 83 

LA100Z 657.5 738.5 195 168 2 x 3/4" 92 92 

LA112Z 642.5 723.5 219 181 2 x 3/4" 103 104 

LA132SP 674.5 776.5 259 195 1" + 3/4" 116 117 

LA132ZMP 720.5 822.5 259 195 1" + 3/4" 125 126 

LA160MP 777 895.5 313.5 227 1" + 3/4" - 150 

LA160ZLP 825 943.5 313.5 227 1" + 3/4" - 150 


5 - 119





[inch] 



9.65 7.09 8.46 0.16 M16x28 2.375 4.72 4.25 0.002 3/4-10UNC 2.65 0.625 6.2 

Gearcase 


6.5 9.65 7.64 12.2 7.09 5.43 7.68 8.46 8.74 13.78 0.16 12.28 8.07 6.3 3.94 


11.02 5.63 1.57 1.12 8.74 0.35 12.6 22.54 M16x22 M16x28 M16x22 0.57 2.44 13.62 0.87 1.02 

Motor 



LA80 19.23 21.73 6.16 6.10 1/2" + 3/4" 267 - 

LA90S 20.45 23.25 6.85 6.42 1/2" + 3/4" 278 - 

LA90Z 22.22 25.02 6.85 6.42 1/2" + 3/4" 278 - 

LA100Z 24.92 28.11 7.68 6.61 2 x 3/4" 295 295 

LA112Z 24.29 27.48 8.62 7.13 2 x 3/4" 322 322 

LA132SP 25.55 29.57 10.20 7.68 1" + 3/4" 346 348 

LA132ZMP 27.36 31.38 10.20 7.68 1" + 3/4" 368 368 

LA160MP 29.67 34.33 12.34 8.94 1" + 3/4" 423 426 

LA160ZLP 31.56 36.22 12.34 8.94 1" + 3/4" 423 426 

LG180ZMB 34.02 38.82 13.70 12.70 1 1/4" + 3/4" - 695 

LG180ZLB 34.02 38.82 13.70 12.70 1 1/4" + 3/4" - 695 


5 - 120 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



245 180 215 4 M16x28 60,325 120 107,95 0,051 3/4“-10UNC 67,31 15,875 157,5 

Gearcase 


165 245 194 310 180 138 195 215 222 350 4 312 205 160 100 


280 143 40 28,5 222 9 320 572,5 M16x22 M16x28 M16x22 14,5 62 346 22 26 

Motor 



LA80 488.5 552 156.5 155 1/2" + 3/4" 121 - 

LA90S 519.5 590.5 174 163 1/2" + 3/4" 126 - 

LA90Z 564.5 635.5 174 163 1/2" + 3/4" 126 - 

LA100Z 633 714 195 168 2 x 3/4" 134 134 

LA112Z 617 698 219 181 2 x 3/4" 146 146 

LA132SP 649 751 259 195 1" + 3/4" 157 158 

LA132ZMP 695 797 259 195 1" + 3/4" 167 167 

LA160MP 753.5 872 313.5 227 1" + 3/4" 192 193 

LA160ZLP 801.5 920 313.5 227 1" + 3/4" 192 193 

LG180ZMB 864 986 348 322.5 1 1/4" + 3/4" - 315 

LG180ZLB 864 986 348 322.5 1 1/4" + 3/4" - 315 


5 - 121





[inch] 



13.78 9.84 0.71 11.81 0.2 7.62 0.69 2.375 4.72 4.25 0.002 3/4-10UNC 2.65 0.625 4.72 

Gearcase 


6.5 9.65 7.64 12.2 7.09 5.43 7.68 8.46 13.78 0.16 12.28 8.07 6.3 


3.94 11.02 7.05 1.57 1.12 8.74 1.77 12.6 22.54 M16x22 M16x28 M16x22 1.99 

Motor 



LA80 20.65 23.15 6.16 6.10 1/2" + 3/4" 295 - 

LA90S 21.87 24.67 6.85 6.42 1/2" + 3/4" 306 - 

LA90Z 23.64 26.44 6.85 6.42 1/2" + 3/4" 306 - 

LA100Z 26.34 29.53 7.68 6.61 2 x 3/4" 324 324 

LA112Z 25.71 28.90 8.62 7.13 2 x 3/4" 351 351 

LA132SP 26.97 30.98 10.20 7.68 1" + 3/4" 375 377 

LA132ZMP 28.78 32.80 10.20 7.68 1" + 3/4" 397 397 

LA160MP 31.08 35.75 12.34 8.94 1" + 3/4" 452 454 

LA160ZLP 32.97 37.64 12.34 8.94 1" + 3/4" 452 454 

LG180ZMB 35.43 40.24 13.70 12.70 1 1/4" + 3/4" - 723 

LG180ZLB 35.43 40.24 13.70 12.70 1 1/4" + 3/4" - 723 


5 - 122 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



350 250 18 300 5 193,5 17,5 60,325 120 107,95 0,051 3/4“-10UNC 67,31 15,875 120 

Gearcase 


165 245 194 310 180 138 195 215 350 4 312 205 160 


100 280 179 40 28,5 222 45 320 572,5 M16x22 M16x28 M16x22 50,5 

Motor 



LA80 524.5 588 156.5 155 1/2" + 3/4" 134 - 

LA90S 555.5 626.5 174 163 1/2" + 3/4" 139 - 

LA90Z 600.5 671.5 174 163 1/2" + 3/4" 139 - 

LA100Z 669 750 195 168 2 x 3/4" 147 147 

LA112Z 653 734 219 181 2 x 3/4" 159 159 

LA132SP 685 787 259 195 1" + 3/4" 170 171 

LA132ZMP 731 833 259 195 1" + 3/4" 180 180 

LA160MP 789.5 908 313.5 227 1" + 3/4" 205 206 

LA160ZLP 837.5 956 313.5 227 1" + 3/4" 205 206 

LG180ZMB 900 1022 348 322.5 1 1/4" + 3/4" - 328 

LG180ZLB 900 1022 348 322.5 1 1/4" + 3/4" - 328 


5 - 123



Shaft mounted 


FDA/FZA108B 

FDAZ/FZAZ108B 



9.65 7.09 8.46 0.16 M16x28 2.375 3.74 9.45 8.189 2.37 7.28 3/4-10UNC 2.66 0.63 3.661 9.61 

Gearcase 


6.5 9.65 7.64 12.2 7.09 5.43 7.68 8.46 8.74 13.78 0.16 12.28 8.07 6.3 3.94 11.02 

Motor 



LA80 19.23 21.73 6.16 6.10 1/2" + 3/4" 238 - 

LA90S 20.45 23.25 6.85 6.42 1/2" + 3/4" 249 - 

LA90Z 22.22 25.02 6.85 6.42 1/2" + 3/4" 249 - 

LA100Z 24.92 28.11 7.68 6.61 2 x 3/4" 267 267 

LA112Z 24.29 27.48 8.62 7.13 2 x 3/4" 293 295 

LA132SP 25.55 29.57 10.20 7.68 1" + 3/4" 320 320 

LA132ZMP 27.36 31.38 10.20 7.68 1" + 3/4" 340 340 

LA160MP 29.67 34.33 12.34 8.94 1" + 3/4" 395 397 

LA160ZLP 31.56 36.22 12.34 8.94 1" + 3/4" 395 397 

LG180ZMB 34.02 38.82 13.70 12.70 1 1/4" + 3/4" - 666 

LG180ZLB 34.02 38.82 13.70 12.70 1 1/4" + 3/4" - 666 


5 - 124 

FA 510 

FAZ 510 

[inch] 


0.91 1.57 1.12 8.74 0.35 1.48 12.6 22.54 M16x22 M16x28 M16x22 0.57 2.44 13.62 0.87 1.02 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


FDA/FZA108B 

FDAZ/FZAZ108B 


FA 510 

FAZ 510 

[mm] 



245 180 215 4 M16x28 60,325 95 240 208 60 185 3/4“-10UNC 67,56 16,002 93 244 

Gearcase 


165 245 194 310 180 138 195 215 222 350 4 312 205 160 100 280 


23 40 28,5 222 9 37,5 320 572,5 M16x22 M16x28 M16x22 14,5 62 346 22 26 

Motor 



LA80 488.5 552 156.5 155 1/2" + 3/4" 108 - 

LA90S 519.5 590.5 174 163 1/2" + 3/4" 113 - 

LA90Z 564.5 635.5 174 163 1/2" + 3/4" 113 - 

LA100Z 633 714 195 168 2 x 3/4" 121 121 

LA112Z 617 698 219 181 2 x 3/4" 133 134 

LA132SP 649 751 259 195 1" + 3/4" 145 145 

LA132ZMP 695 797 259 195 1" + 3/4" 154 154 

LA160MP 753.5 872 313.5 227 1" + 3/4" 179 180 

LA160ZLP 801.5 920 313.5 227 1" + 3/4" 179 180 

LG180ZMB 864 986 348 322.5 1 1/4" + 3/4" - 302 

LG180ZLB 864 986 348 322.5 1 1/4" + 3/4" - 302 


5 - 125





[inch] 



13.78 9.84 0.71 11.81 0.2 1.42 0.69 2.89 2.375 3.74 9.45 8.189 2.37 7.28 3/4-10UNC 2.66 0.63 3.661 9.61 

Gearcase 


6.5 9.65 7.64 12.2 7.09 5.43 7.68 8.46 8.74 13.78 0.16 12.28 8.07 


6.3 3.94 11.02 2.32 1.57 1.12 8.74 1.77 12.6 22.54 M16x22 M16x28 M16x22 1.99 

Motor 

FDAF/FAZF108B Weight [lb] 


LA80 20.65 23.15 6.16 6.10 1/2" + 3/4" 267 - 

LA90S 21.87 24.67 6.85 6.42 1/2" + 3/4" 278 - 

LA90Z 23.64 26.44 6.85 6.42 1/2" + 3/4" 278 - 

LA100Z 26.34 29.53 7.68 6.61 2 x 3/4" 295 295 

LA112Z 25.71 28.90 8.62 7.13 2 x 3/4" 322 324 

LA132SP 26.97 30.98 10.20 7.68 1" + 3/4" 348 348 

LA132ZMP 28.78 32.80 10.20 7.68 1" + 3/4" 368 368 

LA160MP 31.08 35.75 12.34 8.94 1" + 3/4" 423 426 

LA160ZLP 32.97 37.64 12.34 8.94 1" + 3/4" 423 426 

LG180ZMB 35.43 40.24 13.70 12.70 1 1/4" + 3/4" - 695 

LG180ZLB 35.43 40.24 13.70 12.70 1 1/4" + 3/4" - 695 


5 - 126 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



350 250 18 300 5 36 73,5 17,5 60,325 95 240 208 60 185 3/4“-10UNC 67,56 16,002 93 244 

Gearcase 


165 245 194 310 180 138 195 215 222 350 4 312 205 


160 100 280 59 40 28,5 222 45 320 572,5 M16x22 M16x28 M16x22 50,5 

Motor 

FDAF/FAZF108B Weight [kg] 


LA80 524.5 588 156.5 155 1/2" + 3/4" 121 - 

LA90S 555.5 626.5 174 163 1/2" + 3/4" 126 - 

LA90Z 600.5 671.5 174 163 1/2" + 3/4" 126 - 

LA100Z 669 750 195 168 2 x 3/4" 134 134 

LA112Z 653 734 219 181 2 x 3/4" 146 147 

LA132SP 685 787 259 195 1" + 3/4" 158 158 

LA132ZMP 731 833 259 195 1" + 3/4" 167 167 

LA160MP 789.5 908 313.5 227 1" + 3/4" 192 193 

LA160ZLP 837.5 956 313.5 227 1" + 3/4" 192 193 

LG180ZMB 900 1022 348 322.5 1 1/4" + 3/4" - 315 

LG180ZLB 900 1022 348 322.5 1 1/4" + 3/4" - 315 


5 - 127





[inch] 



11.81 9.06 10.43 0.16 M16x28 2.875 5.51 4.875 0.046 3/4-10UNC 3.2 0.75 7.38 

Gearcase 


8.07 11.81 8.86 13.78 9.06 6.5 9.65 10.43 10.43 15.75 0.16 15.35 10.67 7.09 4.72 


11.85 6.99 1.97 1.56 11.1 0.35 15.75 26.44 M20x27 M16x28 M20x27 0.63 2.76 15.55 1.02 1.18 

Motor 



LA90S 22.64 25.45 6.85 6.42 1/2" + 3/4" 454 - 

LA90Z 24.43 27.22 6.85 6.42 1/2" + 3/4" 454 - 

LA100Z 27.11 30.30 7.68 6.61 2 x 3/4" 472 - 

LA112Z 26.50 29.69 8.62 7.13 2 x 3/4" 498 494 

LA132SP 27.72 31.73 10.20 7.68 1" + 3/4" 520 518 

LA132ZMP 29.53 33.54 10.20 7.68 1" + 3/4" 542 538 

LA160MP 31.87 36.54 12.34 8.94 1" + 3/4" 598 593 

LA160ZLP 33.76 38.43 12.34 8.94 1" + 3/4" 598 593 

LG180ZMB 34.09 38.90 13.70 12.70 1 1/4" + 3/4" 875 873 

LG180ZLB 36.10 40.91 13.70 12.70 1 1/4" + 3/4" 875 873 

LG200LB 36.30 41.26 15.16 11.85 1 1/4" + 3/4" 986 983 

K4-LGI225S 46.56 55.96 17.40 12.80 2 x 1 1/2" - 1325 

K4-LGI225ZM 48.92 58.33 17.40 12.80 2 x 1 1/2" - 1427 


5 - 128 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



300 230 265 4 M16x28 73,025 140 123,825 1,168 3/4“-10UNC 81,28 19,05 187,5 

Gearcase 


205 300 225 350 230 165 245 265 265 400 4 390 271 180 120 


301 177,5 50 39,5 282 9 400 671,5 M20x27 M16x28 M20x27 16 70 395 26 30 

Motor 



LA90S 575 646.5 174 163 1/2" + 3/4" 206 - 

LA90Z 620.5 691.5 174 163 1/2" + 3/4" 206 - 

LA100Z 688.5 769.5 195 168 2 x 3/4" 214 - 

LA112Z 673 754 219 181 2 x 3/4" 226 224 

LA132SP 704 806 259 195 1" + 3/4" 236 235 

LA132ZMP 750 852 259 195 1" + 3/4" 246 244 

LA160MP 809.5 928 313.5 227 1" + 3/4" 271 269 

LA160ZLP 857.5 976 313.5 227 1" + 3/4" 271 269 

LG180ZMB 866 988 348 322.5 1 1/4" + 3/4" 397 396 

LG180ZLB 917 1039 348 322.5 1 1/4" + 3/4" 397 396 

LG200LB 922 1048 385 301 1 1/4" + 3/4" 447 446 

K4-LGI225S 1182.5 1421.5 442 325 2 x 1 1/2" - 601 

K4-LGI225ZM 1242.5 1481.5 442 325 2 x 1 1/2" - 647 


5 - 129





[inch] 



17.72 13.78 0.87 15.75 0.2 9.02 0.69 2.875 5.51 4.875 0.046 3/4-10UNC 3.2 0.75 5.51 

Gearcase 


8.07 11.81 8.86 13.78 9.06 6.5 9.65 10.43 15.75 0.16 15.35 10.67 7.09 


4.72 11.85 8.62 1.97 1.56 11.1 1.99 15.75 26.44 M20x27 M16x28 M20x27 2.26 

Motor 



LA90S 24.29 27.09 6.85 6.42 1/2" + 3/4" 498 - 

LA90Z 26.06 28.86 6.85 6.42 1/2" + 3/4" 498 - 

LA100Z 28.74 31.93 7.68 6.61 2 x 3/4" 516 - 

LA112Z 28.13 31.32 8.62 7.13 2 x 3/4" 542 538 

LA132SP 29.35 33.37 10.20 7.68 1" + 3/4" 564 562 

LA132ZMP 31.16 35.18 10.20 7.68 1" + 3/4" 587 582 

LA160MP 33.50 38.17 12.34 8.94 1" + 3/4" 642 637 

LA160ZLP 35.39 40.06 12.34 8.94 1" + 3/4" 642 637 

LG180ZMB 35.73 40.53 13.70 12.70 1 1/4" + 3/4" 919 917 

LG180ZLB 37.74 42.54 13.70 12.70 1 1/4" + 3/4" 919 917 

LG200LB 37.93 42.89 15.16 11.85 1 1/4" + 3/4" 1030 1028 

K4-LGI225S 48.19 57.60 17.40 12.80 2 x 1 1/2" - 1369 

K4-LGI225ZM 50.55 59.96 17.40 12.80 2 x 1 1/2" - 1471 


5 - 130 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



450 350 22 400 5 229 17,5 73,025 140 123,825 1,168 3/4“-10UNC 81,28 19,05 140 

Gearcase 


205 300 225 350 230 165 245 265 400 4 390 271 180 


120 301 219 50 39,5 282 50,5 400 671,5 M20x27 M16x28 M20x27 57,5 

Motor 



LA90S 617 688 174 163 1/2" + 3/4" 226 - 

LA90Z 662 733 174 163 1/2" + 3/4" 226 - 

LA100Z 730 811 195 168 2 x 3/4" 234 - 

LA112Z 714.5 795.5 219 181 2 x 3/4" 246 244 

LA132SP 745.5 847.5 259 195 1" + 3/4" 256 255 

LA132ZMP 791.5 893.5 259 195 1" + 3/4" 266 264 

LA160MP 851 969.5 313.5 227 1" + 3/4" 291 289 

LA160ZLP 899 1017.5 313.5 227 1" + 3/4" 291 289 

LG180ZMB 907.5 1029.5 348 322.5 1 1/4" + 3/4" 417 416 

LG180ZLB 958.5 1080.5 348 322.5 1 1/4" + 3/4" 417 416 

LG200LB 963.5 1089.5 385 301 1 1/4" + 3/4" 467 466 

K4-LGI225S 1224 1463 442 325 2 x 1 1/2" - 621 

K4-LGI225ZM 1284 1523 442 325 2 x 1 1/2" - 667 


5 - 131



Shaft mounted 


FDA/FZA128B 

FDAZ/FZAZ128B 



11.81 9.06 10.43 0.16 M16x28 2.75 4.331 11.81 10.354 2.35 9.45 3/4-10UNC 3.04 0.63 4.843 11.97 

Gearcase 


8.07 11.81 8.86 13.78 9.06 6.5 9.65 10.43 10.43 15.75 0.16 15.35 10.67 7.09 4.72 11.85 

Motor 


Motor C CB P AB AAFDA128B-FDAZ128B FZA128B-FZAZ128B 

LA90S 22.64 25.45 6.85 6.42 1/2" + 3/4" 410 - 

LA90Z 24.43 27.22 6.85 6.42 1/2" + 3/4" 410 - 

LA100Z 27.11 30.30 7.68 6.61 2 x 3/4" 428 - 

LA112Z 26.50 29.69 8.62 7.13 2 x 3/4" 454 450 

LA132SP 27.72 31.73 10.20 7.68 1" + 3/4" 478 474 

LA132ZMP 29.53 33.54 10.20 7.68 1" + 3/4" 498 494 

LA160MP 31.87 36.54 12.34 8.94 1" + 3/4" 553 549 

LA160ZLP 33.76 38.43 12.34 8.94 1" + 3/4" 553 549 

LG180ZMB 34.09 38.90 13.70 12.70 1 1/4" + 3/4" 833 829 

LG180ZLB 36.10 40.91 13.70 12.70 1 1/4" + 3/4" 833 829 

LG200LB 36.30 41.26 15.16 11.85 1 1/4" + 3/4" 944 939 

K4-LGI225S 46.56 55.96 17.40 12.80 2 x 1 1/2" - 1281 

K4-LGI225ZM 48.92 58.33 17.40 12.80 2 x 1 1/2" - 1383 


5 - 132 

FA 510 

FAZ 510 

[inch] 


1.48 1.97 1.56 11.1 0.35 1.87 15.75 26.44 M20x27 M16x28 M20x27 0.63 2.76 15.55 1.02 1.18 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


FDA/FZA128B 

FDAZ/FZAZ128B 


FA 510 

FAZ 510 

[mm] 



300 230 265 4 M16x28 69,85 110 300 263 60 240 3/4“-10UNC 77,22 16,002 123 304 

Gearcase 


205 300 225 350 230 165 245 265 265 400 4 390 271 180 120 301 


37,5 50 39,5 282 9 47,5 400 671,5 M20x27 M16x28 M20x27 16 70 395 26 30 

Motor 



LA90S 575 646.5 174 163 1/2" + 3/4" 186 - 

LA90Z 620.5 691.5 174 163 1/2" + 3/4" 186 - 

LA100Z 688.5 769.5 195 168 2 x 3/4" 194 - 

LA112Z 673 754 219 181 2 x 3/4" 206 204 

LA132SP 704 806 259 195 1" + 3/4" 217 215 

LA132ZMP 750 852 259 195 1" + 3/4" 226 224 

LA160MP 809.5 928 313.5 227 1" + 3/4" 251 249 

LA160ZLP 857.5 976 313.5 227 1" + 3/4" 251 249 

LG180ZMB 866 988 348 322.5 1 1/4" + 3/4" 378 376 

LG180ZLB 917 1039 348 322.5 1 1/4" + 3/4" 378 376 

LG200LB 922 1048 385 301 1 1/4" + 3/4" 428 426 

K4-LGI225S 1182.5 1421.5 442 325 2 x 1 1/2" - 581 

K4-LGI225ZM 1242.5 1481.5 442 325 2 x 1 1/2" - 627 


5 - 133





[inch] 



17.72 13.78 0.87 15.75 0.2 1.63 0.69 3.5 2.75 4.331 11.81 10.354 2.35 9.45 3/4-10UNC 3.04 0.63 4.843 11.97 

Gearcase 


8.07 11.81 8.86 13.78 9.06 6.5 9.65 10.43 10.43 15.75 0.16 15.35 10.67 


7.09 4.72 11.85 3.11 1.97 1.56 11.1 1.99 15.75 26.44 M20x27 M16x28 M20x27 2.26 

Motor 



LA90S 24.29 27.09 6.85 6.42 1/2" + 3/4" 454 - 

LA90Z 26.06 28.86 6.85 6.42 1/2" + 3/4" 454 - 

LA100Z 28.74 31.93 7.68 6.61 2 x 3/4" 472 - 

LA112Z 28.13 31.32 8.62 7.13 2 x 3/4" 498 494 

LA132SP 29.35 33.37 10.20 7.68 1" + 3/4" 523 518 

LA132ZMP 31.16 35.18 10.20 7.68 1" + 3/4" 542 538 

LA160MP 33.50 38.17 12.34 8.94 1" + 3/4" 598 593 

LA160ZLP 35.39 40.06 12.34 8.94 1" + 3/4" 598 593 

LG180ZMB 35.73 40.53 13.70 12.70 1 1/4" + 3/4" 878 873 

LG180ZLB 37.74 42.54 13.70 12.70 1 1/4" + 3/4" 878 873 

LG200LB 37.93 42.89 15.16 11.85 1 1/4" + 3/4" 988 983 

K4-LGI225S 48.19 57.60 17.40 12.80 2 x 1 1/2" - 1325 

K4-LGI225ZM 50.55 59.96 17.40 12.80 2 x 1 1/2" - 1427 


5 - 134 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



450 350 22 400 5 41,5 89 17,5 69,85 110 300 263 60 240 3/4“-10UNC 77,22 16,002 123 304 

Gearcase 


205 300 225 350 230 165 245 265 265 400 4 390 271 


180 120 301 79 50 39,5 282 50,5 400 671,5 M20x27 M16x28 M20x27 57,5 

Motor 



LA90S 617 688 174 163 1/2" + 3/4" 206 - 

LA90Z 662 733 174 163 1/2" + 3/4" 206 - 

LA100Z 730 811 195 168 2 x 3/4" 214 - 

LA112Z 714.5 795.5 219 181 2 x 3/4" 226 224 

LA132SP 745.5 847.5 259 195 1" + 3/4" 237 235 

LA132ZMP 791.5 893.5 259 195 1" + 3/4" 246 244 

LA160MP 851 969.5 313.5 227 1" + 3/4" 271 269 

LA160ZLP 899 1017.5 313.5 227 1" + 3/4" 271 269 

LG180ZMB 907.5 1029.5 348 322.5 1 1/4" + 3/4" 398 396 

LG180ZLB 958.5 1080.5 348 322.5 1 1/4" + 3/4" 398 396 

LG200LB 963.5 1089.5 385 301 1 1/4" + 3/4" 448 446 

K4-LGI225S 1224 1463 442 325 2 x 1 1/2" - 601 

K4-LGI225ZM 1284 1523 442 325 2 x 1 1/2" - 647 


5 - 135





[inch] 



13.19 9.84 11.81 0.2 M20x34 3.625 6.69 5.5 0.602 1-8UNC 4.01 0.875 9.25 

Gearcase 


8.66 13.19 10.31 15.75 9.84 7.48 10.24 11.81 11.89 18.11 0.2 16.93 11.73 8.35 4.92 


13.82 8.43 2.36 1.57 12.91 0.43 17.72 30.73 M24x32 M20x34 M24x32 1.46 3.46 19.09 1.02 1.42 

Motor 



LA100Z 28.62 31.81 7.68 6.61 2 x 3/4" 686 - 

LA112Z 27.97 31.16 8.62 7.13 2 x 3/4" 710 - 

LA132SP 29.19 33.21 10.20 7.68 1" + 3/4" 730 - 

LA132ZMP 31.00 35.02 10.20 7.68 1" + 3/4" 750 741 

LA160MP 33.11 37.78 12.34 8.94 1" + 3/4" 818 807 

LA160ZLP 35.00 39.67 12.34 8.94 1" + 3/4" 818 807 

LG180ZMB 35.45 40.26 13.70 12.70 1 1/4" + 3/4" 1085 1074 

LG180ZLB 37.46 42.26 13.70 12.70 1 1/4" + 3/4" 1085 1074 

LG200LB 37.66 42.62 15.16 11.85 1 1/4" + 3/4" 1195 1184 

LG225S 40.45 49.86 17.40 12.80 2 x 1 1/2" 1363 1354 

LG225ZM 42.81 52.22 17.40 12.80 2 x 1 1/2" 1464 1455 

K4-LGI250ZM 54.51 63.37 19.49 15.43 2 x 2 1/2" - 1949 


5 - 136 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



335 250 300 5 M20x34 92,075 170 139,7 15,291 1“-8UNC 101,85 22,225 235 

Gearcase 


220 335 262 400 250 190 260 300 302 460 5 430 298 212 125 


351 214 60 40 328 11 450 780,5 M24x32 M20x34 M24x32 37 88 485 26 36 

Motor 



LA100Z 727 808 195 168 2 x 3/4" 311 - 

LA112Z 710.5 791.5 219 181 2 x 3/4" 322 - 

LA132SP 741.5 843.5 259 195 1" + 3/4" 331 327 

LA132ZMP 787.5 889.5 259 195 1" + 3/4" 340 336 

LA160MP 841 959.5 313.5 227 1" + 3/4" 371 366 

LA160ZLP 889 1007.5 313.5 227 1" + 3/4" 371 366 

LG180ZMB 900.5 1022.5 348 322.5 1 1/4" + 3/4" 492 487 

LG180ZLB 951.5 1073.5 348 322.5 1 1/4" + 3/4" 492 487 

LG200LB 956.5 1082.5 385 301 1 1/4" + 3/4" 542 537 

LG225S 1027.5 1266.5 442 325 2 x 1 1/2" 618 614 

LG225ZM 1087.5 1326.5 442 325 2 x 1 1/2" 664 660 

K4-LGI250ZM 1384.5 1609.5 495 392 2 x 2 1/2" - 884 


5 - 137





[inch] 



17.72 13.78 0.87 15.75 0.2 10.87 0.69 3.625 6.69 5.5 0.602 1-8UNC 4.01 0.875 6.69 

Gearcase 


8.66 13.19 10.31 15.75 9.84 7.48 10.24 11.81 18.11 0.2 16.93 11.73 8.35 


4.92 13.82 10.04 2.36 1.57 12.91 2.05 17.72 30.73 M24x32 M20x34 M24x32 3.07 

Motor 



LA100Z 30.24 33.43 7.68 6.61 2 x 3/4" 734 - 

LA112Z 29.59 32.78 8.62 7.13 2 x 3/4" 761 - 

LA132SP 30.81 34.82 10.20 7.68 1" + 3/4" 781 - 

LA132ZMP 32.62 36.63 10.20 7.68 1" + 3/4" 800 792 

LA160MP 34.72 39.39 12.34 8.94 1" + 3/4" 867 858 

LA160ZLP 35.00 39.67 12.34 8.94 1" + 3/4" 867 858 

LG180ZMB 37.07 41.87 13.70 12.70 1 1/4" + 3/4" 1133 1125 

LG180ZLB 39.07 43.88 13.70 12.70 1 1/4" + 3/4" 1133 1125 

LG200LB 39.27 44.23 15.16 11.85 1 1/4" + 3/4" 1244 1235 

LG225S 42.07 51.48 17.40 12.80 2 x 1 1/2" 1407 1405 

LG225ZM 44.43 53.84 17.40 12.80 2 x 1 1/2" 1508 1506 

K4-LGI250ZM 56.12 64.98 19.49 15.43 2 x 2 1/2" - 2000 


5 - 138 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



450 350 22 400 5 276 17,5 92,075 170 139,7 15,291 1“-8UNC 101,85 22,225 170 

Gearcase 


220 335 262 400 250 190 260 300 460 5 430 298 212 


125 351 255 60 40 328 52 450 780,5 M24x32 M20x34 M24x32 78 

Motor 



LA100Z 768 849 195 168 2 x 3/4" 333 - 

LA112Z 751.5 832.5 219 181 2 x 3/4" 345 - 

LA132SP 782.5 884.5 259 195 1" + 3/4" 354 350 

LA132ZMP 828.5 930.5 259 195 1" + 3/4" 363 359 

LA160MP 882 1000.5 313.5 227 1" + 3/4" 393 389 

LA160ZLP 889 1007.5 313.5 227 1" + 3/4" 393 389 

LG180ZMB 941.5 1063.5 348 322.5 1 1/4" + 3/4" 514 510 

LG180ZLB 992.5 1114.5 348 322.5 1 1/4" + 3/4" 514 510 

LG200LB 997.5 1123.5 385 301 1 1/4" + 3/4" 564 560 

LG225S 1068.5 1307.5 442 325 2 x 1 1/2" 638 637 

LG225ZM 1128.5 1367.5 442 325 2 x 1 1/2" 684 683 

K4-LGI250ZM 1425.5 1650.5 495 392 2 x 2 1/2" - 907 


5 - 139



Shaft mounted 


FDA/FZA148B 

FDAZ/FZAZ148B 



13.19 9.84 11.81 0.2 M20x34 3.625 4.724 13.78 12.205 2.1 11.22 1-8UNC 3.84 0.88 5.827 13.94 

Gearcase 


8.66 13.19 10.31 15.75 9.84 7.48 10.24 11.81 11.89 18.11 0.2 16.93 11.73 8.35 4.92 13.82 

Motor 



LA100Z 28.62 31.81 7.68 6.61 2 x 3/4" 624 - 

LA112Z 27.97 31.16 8.62 7.13 2 x 3/4" 648 - 

LA132SP 29.19 33.21 10.20 7.68 1" + 3/4" 668 - 

LA132ZMP 31.00 35.02 10.20 7.68 1" + 3/4" 690 679 

LA160MP 33.11 37.78 12.34 8.94 1" + 3/4" 756 747 

LA160ZLP 35.00 39.67 12.34 8.94 1" + 3/4" 756 747 

LG180ZMB 35.45 40.26 13.70 12.70 1 1/4" + 3/4" 1023 1014 

LG180ZLB 37.46 42.26 13.70 12.70 1 1/4" + 3/4" 1023 1014 

LG200LB 37.66 42.62 15.16 11.85 1 1/4" + 3/4" 1133 1125 

LG225S 40.45 49.86 17.40 12.80 2 x 1 1/2" 1301 1294 

LG225ZM 42.81 52.22 17.40 12.80 2 x 1 1/2" 1402 1396 

K4-LGI250ZM 54.51 63.37 19.49 15.43 2 x 2 1/2" - 1890 


5 - 140 

FA 510 

FAZ 510 

[inch] 


1.73 2.36 1.57 12.91 0.43 2.56 17.72 30.73 M24x32 M20x34 M24x32 1.46 3.46 19.09 1.02 1.42 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


FDA/FZA148B 

FDAZ/FZAZ148B 


FA 510 

FAZ 510 

[mm] 



335 250 300 5 M20x34 92,075 120 350 310 53 285 1“-8UNC 97,54 22,352 148 354 

Gearcase 


220 335 262 400 250 190 260 300 302 460 5 430 298 212 125 351 


44 60 40 328 11 65 450 780,5 M24x32 M20x34 M24x32 37 88 485 26 36 

Motor 



LA100Z 727 808 195 168 2 x 3/4" 283 - 

LA112Z 710.5 791.5 219 181 2 x 3/4" 294 - 

LA132SP 741.5 843.5 259 195 1" + 3/4" 303 299 

LA132ZMP 787.5 889.5 259 195 1" + 3/4" 313 308 

LA160MP 841 959.5 313.5 227 1" + 3/4" 343 339 

LA160ZLP 889 1007.5 313.5 227 1" + 3/4" 343 339 

LG180ZMB 900.5 1022.5 348 322.5 1 1/4" + 3/4" 464 460 

LG180ZLB 951.5 1073.5 348 322.5 1 1/4" + 3/4" 464 460 

LG200LB 956.5 1082.5 385 301 1 1/4" + 3/4" 514 510 

LG225S 1027.5 1266.5 442 325 2 x 1 1/2" 590 587 

LG225ZM 1087.5 1326.5 442 325 2 x 1 1/2" 636 633 

K4-LGI250ZM 1384.5 1609.5 495 392 2 x 2 1/2" - 857 


5 - 141





[inch] 



17.72 13.78 0.87 15.75 0.2 1.61 0.69 4.17 3.625 4.724 13.78 12.205 2.1 11.22 1-8UNC 3.84 0.88 5.827 13.94 

Gearcase 


8.66 13.19 10.31 15.75 9.84 7.48 10.24 11.81 11.89 18.11 0.2 16.93 11.73 


8.35 4.92 13.82 3.35 2.36 1.57 12.91 2.05 17.72 30.73 M24x32 M20x34 M24x32 3.07 

Motor 



LA100Z 30.24 33.43 7.68 6.61 2 x 3/4" 673 - 

LA112Z 29.59 32.78 8.62 7.13 2 x 3/4" 699 - 

LA132SP 30.81 34.82 10.20 7.68 1" + 3/4" 719 - 

LA132ZMP 32.62 36.63 10.20 7.68 1" + 3/4" 739 730 

LA160MP 34.72 39.39 12.34 8.94 1" + 3/4" 805 796 

LA160ZLP 35.00 39.67 12.34 8.94 1" + 3/4" 805 796 

LG180ZMB 37.07 41.87 13.70 12.70 1 1/4" + 3/4" 1072 1063 

LG180ZLB 39.07 43.88 13.70 12.70 1 1/4" + 3/4" 1072 1063 

LG200LB 39.27 44.23 15.16 11.85 1 1/4" + 3/4" 1182 1173 

LG225S 42.07 51.48 17.40 12.80 2 x 1 1/2" 1345 1343 

LG225ZM 44.43 53.84 17.40 12.80 2 x 1 1/2" 1446 1444 

K4-LGI250ZM 56.12 64.98 19.49 15.43 2 x 2 1/2" - 1938 


5 - 142 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



450 350 22 400 5 41 106 17,5 92,075 120 350 310 53 285 1“-8UNC 97,54 22,352 148 354 

Gearcase 


220 335 262 400 250 190 260 300 302 460 5 430 298 


212 125 351 85 60 40 328 52 450 780,5 M24x32 M20x34 M24x32 78 

Motor 



LA100Z 768 849 195 168 2 x 3/4" 305 - 

LA112Z 751.5 832.5 219 181 2 x 3/4" 317 - 

LA132SP 782.5 884.5 259 195 1" + 3/4" 326 322 

LA132ZMP 828.5 930.5 259 195 1" + 3/4" 335 331 

LA160MP 882 1000.5 313.5 227 1" + 3/4" 365 361 

LA160ZLP 889 1007.5 313.5 227 1" + 3/4" 365 361 

LG180ZMB 941.5 1063.5 348 322.5 1 1/4" + 3/4" 486 482 

LG180ZLB 992.5 1114.5 348 322.5 1 1/4" + 3/4" 486 482 

LG200LB 997.5 1123.5 385 301 1 1/4" + 3/4" 536 532 

LG225S 1068.5 1307.5 442 325 2 x 1 1/2" 610 609 

LG225ZM 1128.5 1367.5 442 325 2 x 1 1/2" 656 655 

K4-LGI250ZM 1425.5 1650.5 495 392 2 x 2 1/2" - 879 


5 - 143





[inch] 



15.75 11.81 13.78 0.2 M20x34 4.375 8.27 7 0.677 1-8UNC 4.82 1 11.02 

Gearcase 


10.63 15.75 12.4 17.72 11.81 8.07 12.99 13.78 14.45 20.47 0.2 19.37 13.39 9.84 5.59 


16.22 9.92 2.76 2.01 15.28 0.43 19.69 35.81 M30x40 M20x34 M30x40 1.34 4.33 21.65 1.3 1.97 

Motor 



LA132SP 30.41 34.43 10.20 7.68 1" + 3/4" 1094 1069 

LA132ZMP 32.22 36.24 10.20 7.68 1" + 3/4" 1114 1089 

LA160MP 34.35 39.02 12.34 8.94 1" + 3/4" 1169 1144 

LA160ZLP 36.24 40.91 12.34 8.94 1" + 3/4" 1169 1144 

LG180ZMB 36.69 41.50 13.70 12.70 1 1/4" + 3/4" 1446 1420 

LG180ZLB 38.70 43.50 13.70 12.70 1 1/4" + 3/4" 1446 1420 

LG200LB 38.90 43.86 15.16 11.85 1 1/4" + 3/4" 1557 1530 

LG225S 41.69 51.10 17.40 12.80 2 x 1 1/2" 1718 1693 

LG225ZM 44.06 53.46 17.40 12.80 2 x 1 1/2" 1819 1795 

LG250ZM 44.78 54.19 17.40 12.80 2 x 1 1/2" 2143 2119 

K4-LGI280ZM 60.69 69.63 21.85 17.01 2 x 2 1/2" - 2622 


5 - 144 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



400 300 350 5 M20x34 111,125 210 177,8 17,196 1“-8UNC 122,43 25,4 280 

Gearcase 


270 400 315 450 300 205 330 350 367 520 5 492 340 250 142 


412 252 70 51 388 11 500 909,5 M30x40 M20x34 M30x40 34 110 550 33 50 

Motor 



LA132SP 772.5 874.5 259 195 1" + 3/4" 496 485 

LA132ZMP 818.5 920.5 259 195 1" + 3/4" 505 494 

LA160MP 872.5 991 313.5 227 1" + 3/4" 530 519 

LA160ZLP 920.5 1039 313.5 227 1" + 3/4" 530 519 

LG180ZMB 932 1054 348 322.5 1 1/4" + 3/4" 656 644 

LG180ZLB 983 1105 348 322.5 1 1/4" + 3/4" 656 644 

LG200LB 988 1114 385 301 1 1/4" + 3/4" 706 694 

LG225S 1059 1298 442 325 2 x 1 1/2" 779 768 

LG225ZM 1119 1358 442 325 2 x 1 1/2" 825 814 

LG250ZM 1137.5 1376.5 442 325 2 x 1 1/2" 972 961 

K4-LGI280ZM 1541.5 1768.5 555 432 2 x 2 1/2" - 1189 


5 - 145





[inch] 



21.65 17.72 0.98 19.69 0.2 13.03 0.69 4.375 8.27 7 0.677 1-8UNC 4.82 1 8.27 

Gearcase 


10.63 15.75 12.4 17.72 11.81 8.07 12.99 13.78 20.47 0.2 19.37 13.39 9.84 


5.59 16.22 11.93 2.76 2.01 15.28 2.44 19.69 35.81 M30x40 M20x34 M30x40 3.35 

Motor 



LA132SP 32.42 36.44 10.20 7.68 1" + 3/4" 1175 1151 

LA132ZMP 34.23 38.25 10.20 7.68 1" + 3/4" 1195 1171 

LA160MP 36.36 41.02 12.34 8.94 1" + 3/4" 1250 1226 

LA160ZLP 38.25 42.91 12.34 8.94 1" + 3/4" 1250 1226 

LG180ZMB 38.70 43.50 13.70 12.70 1 1/4" + 3/4" 1528 1502 

LG180ZLB 40.71 45.51 13.70 12.70 1 1/4" + 3/4" 1528 1502 

LG200LB 40.91 45.87 15.16 11.85 1 1/4" + 3/4" 1638 1612 

LG225S 43.70 53.11 17.40 12.80 2 x 1 1/2" 1799 1775 

LG225ZM 46.06 55.47 17.40 12.80 2 x 1 1/2" 1901 1876 

LG250ZM 46.40 55.81 17.40 12.80 2 x 1 1/2" 2225 2201 

K4-LGI280ZM 62.70 71.63 21.85 17.01 2 x 2 1/2" - 2703 


5 - 146 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



550 450 25 500 5 331 17,5 111,125 210 177,8 17,196 1“-8UNC 122,43 25,4 210 

Gearcase 


270 400 315 450 300 205 330 350 520 5 492 340 250 


142 412 303 70 51 388 62 500 909,5 M30x40 M20x34 M30x40 85 

Motor 



LA132SP 823.5 925.5 259 195 1" + 3/4" 533 522 

LA132ZMP 869.5 971.5 259 195 1" + 3/4" 542 531 

LA160MP 923.5 1042 313.5 227 1" + 3/4" 567 556 

LA160ZLP 971.5 1090 313.5 227 1" + 3/4" 567 556 

LG180ZMB 983 1105 348 322.5 1 1/4" + 3/4" 693 681 

LG180ZLB 1034 1156 348 322.5 1 1/4" + 3/4" 693 681 

LG200LB 1039 1165 385 301 1 1/4" + 3/4" 743 731 

LG225S 1110 1349 442 325 2 x 1 1/2" 816 805 

LG225ZM 1170 1409 442 325 2 x 1 1/2" 862 851 

LG250ZM 1178.5 1417.5 442 325 2 x 1 1/2" 1009 998 

K4-LGI280ZM 1592.5 1819.5 555 432 2 x 2 1/2" - 1226 


5 - 147



Shaft mounted 


FDA/FZA168B 

FDAZ/FZAZ168B 



15.75 11.81 13.78 0.2 M20x34 4 5.906 16.14 14.409 2.09 13.39 1-8UNC 4.45 1 6.89 16.3 

Gearcase 


10.63 15.75 12.4 17.72 11.81 8.07 12.99 13.78 14.45 20.47 0.2 19.37 13.39 9.84 5.59 16.22 

Motor 



LA132SP 30.41 34.43 10.20 7.68 1" + 3/4" 994 970 

LA132ZMP 32.22 36.24 10.20 7.68 1" + 3/4" 1014 990 

LA160MP 34.35 39.02 12.34 8.94 1" + 3/4" 1069 1045 

LA160ZLP 36.24 40.91 12.34 8.94 1" + 3/4" 1069 1045 

LG180ZMB 36.69 41.50 13.70 12.70 1 1/4" + 3/4" 1347 1321 

LG180ZLB 38.70 43.50 13.70 12.70 1 1/4" + 3/4" 1347 1321 

LG200LB 38.90 43.86 15.16 11.85 1 1/4" + 3/4" 1458 1431 

LG225S 41.69 51.10 17.40 12.80 2 x 1 1/2" 1618 1594 

LG225ZM 44.06 53.46 17.40 12.80 2 x 1 1/2" 1720 1696 

LG250ZM 44.78 54.19 17.40 12.80 2 x 1 1/2" 2044 2020 

K4-LGI280ZM 60.69 69.63 21.85 17.01 2 x 2 1/2" - 2523 

5 - 148 

FA 510 

FAZ 510 

[inch] 


1.65 2.76 2.01 15.28 0.43 2.76 19.69 35.81 M30x40 M20x34 M30x40 1.34 4.33 21.65 1.3 1.97 


(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


FDA/FZA168B 

FDAZ/FZAZ168B 


FA 510 

FAZ 510 

[mm] 



400 300 350 5 M20x34 101,6 150 410 366 53 340 1“-8UNC 113,03 25,4 175 414 

Gearcase 


270 400 315 450 300 205 330 350 367 520 5 492 340 250 142 412 


42 70 51 388 11 70 500 909,5 M30x40 M20x34 M30x40 34 110 550 33 50 

Motor 



LA132SP 772.5 874.5 259 195 1" + 3/4" 451 440 

LA132ZMP 818.5 920.5 259 195 1" + 3/4" 460 449 

LA160MP 872.5 991 313.5 227 1" + 3/4" 485 474 

LA160ZLP 920.5 1039 313.5 227 1" + 3/4" 485 474 

LG180ZMB 932 1054 348 322.5 1 1/4" + 3/4" 611 599 

LG180ZLB 983 1105 348 322.5 1 1/4" + 3/4" 611 599 

LG200LB 988 1114 385 301 1 1/4" + 3/4" 661 649 

LG225S 1059 1298 442 325 2 x 1 1/2" 734 723 

LG225ZM 1119 1358 442 325 2 x 1 1/2" 780 769 

LG250ZM 1137.5 1376.5 442 325 2 x 1 1/2" 927 916 

K4-LGI280ZM 1541.5 1768.5 555 432 2 x 2 1/2" - 1144 


5 - 149





[inch] 



21.65 17.72 0.98 19.69 0.2 2.01 0.69 4.76 4 5.906 16.14 14.409 2.09 13.39 1-8UNC 4.45 1 6.89 16.3 

Gearcase 


10.63 15.75 12.4 17.72 11.81 8.07 12.99 13.78 14.45 20.47 0.2 19.37 13.39 


9.84 5.59 16.22 3.66 2.76 2.01 15.28 2.44 19.69 35.81 M30x40 M20x34 M30x40 3.35 

Motor 



LA132SP 32.42 36.44 10.20 7.68 1" + 3/4" 1076 1052 

LA132ZMP 34.23 38.25 10.20 7.68 1" + 3/4" 1096 1072 

LA160MP 36.36 41.02 12.34 8.94 1" + 3/4" 1151 1127 

LA160ZLP 38.25 42.91 12.34 8.94 1" + 3/4" 1151 1127 

LG180ZMB 38.70 43.50 13.70 12.70 1 1/4" + 3/4" 1429 1402 

LG180ZLB 40.71 45.51 13.70 12.70 1 1/4" + 3/4" 1429 1402 

LG200LB 40.91 45.87 15.16 11.85 1 1/4" + 3/4" 1539 1513 

LG225S 43.70 53.11 17.40 12.80 2 x 1 1/2" 1700 1676 

LG225ZM 46.06 55.47 17.40 12.80 2 x 1 1/2" 1801 1777 

LG250ZM 46.40 55.81 17.40 12.80 2 x 1 1/2" 2126 2101 

K4-LGI280ZM 62.70 71.63 21.85 17.01 2 x 2 1/2" - 2604 


5 - 150 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



550 450 25 500 5 51 121 17,5 101,6 150 410 366 53 340 1“-8UNC 113,03 25,4 175 414 

Gearcase 


270 400 315 450 300 205 330 350 367 520 5 492 340 


250 142 412 93 70 51 388 62 500 909,5 M30x40 M20x34 M30x40 85 

Motor 



LA132SP 823.5 925.5 259 195 1" + 3/4" 488 477 

LA132ZMP 869.5 971.5 259 195 1" + 3/4" 497 486 

LA160MP 923.5 1042 313.5 227 1" + 3/4" 522 511 

LA160ZLP 971.5 1090 313.5 227 1" + 3/4" 522 511 

LG180ZMB 983 1105 348 322.5 1 1/4" + 3/4" 648 636 

LG180ZLB 1034 1156 348 322.5 1 1/4" + 3/4" 648 636 

LG200LB 1039 1165 385 301 1 1/4" + 3/4" 698 686 

LG225S 1110 1349 442 325 2 x 1 1/2" 771 760 

LG225ZM 1170 1409 442 325 2 x 1 1/2" 817 806 

LG250ZM 1178.5 1417.5 442 325 2 x 1 1/2" 964 953 

K4-LGI280ZM 1592.5 1819.5 555 432 2 x 2 1/2" - 1181 


5 - 151





[inch] 



15.75 11.81 13.78 0.2 M24x32 4.75 8.27 7 0.677 1-8UNC 5.29 1.25 12.01 

Gearcase 


12.2 15.75 13.39 21.26 11.81 9.25 14.37 13.78 15.75 24.41 0.2 21.26 16.3 10.43 6.69 


17.32 11.42 3.15 2.46 18.58 0.55 22.05 38.41 M36x50 M24x32 M36x50 1.56 4.33 24.41 1.3 1.97 

Motor 



LA132SP 32.97 36.99 10.20 7.68 1" + 3/4" 1510 - 

LA132ZMP 34.78 38.80 10.20 7.68 1" + 3/4" 1530 - 

LA160MP 36.91 41.57 12.34 8.94 1" + 3/4" 1583 1552 

LA160ZLP 38.80 43.46 12.34 8.94 1" + 3/4" 1583 1552 

LG180ZMB 39.25 44.06 13.70 12.70 1 1/4" + 3/4" 1861 1828 

LG180ZLB 41.26 46.06 13.70 12.70 1 1/4" + 3/4" 1861 1828 

LG200LB 41.46 46.42 15.16 11.85 1 1/4" + 3/4" 1971 1938 

LG225S 44.25 53.66 17.40 12.80 2 x 1 1/2" 2132 2099 

LG225ZM 46.61 56.02 17.40 12.80 2 x 1 1/2" 2234 2201 

LG250ZM 48.58 57.99 17.40 12.80 2 x 1 1/2" 2558 2525 

K4-LGI280ZM 63.27 72.20 21.85 17.01 2 x 2 1/2" - 3008 


5 - 152 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



400 300 350 5 M24x32 120,65 210 177,8 17,196 1“-8UNC 134,37 31,75 305 

Gearcase 


310 400 340 540 300 235 365 350 400 620 5 540 414 265 170 


440 290 80 62,5 472 14 560 975,5 M36x50 M24x32 M36x50 39,5 110 620 33 50 

Motor 



LA132SP 837.5 939.5 259 195 1" + 3/4" 685 - 

LA132ZMP 883.5 985.5 259 195 1" + 3/4" 694 - 

LA160MP 937.5 1056 313.5 227 1" + 3/4" 718 704 

LA160ZLP 985.5 1104 313.5 227 1" + 3/4" 718 704 

LG180ZMB 997 1119 348 322.5 1 1/4" + 3/4" 844 829 

LG180ZLB 1048 1170 348 322.5 1 1/4" + 3/4" 844 829 

LG200LB 1053 1179 385 301 1 1/4" + 3/4" 894 879 

LG225S 1124 1363 442 325 2 x 1 1/2" 967 952 

LG225ZM 1184 1423 442 325 2 x 1 1/2" 1013 998 

LG250ZM 1234 1473 442 325 2 x 1 1/2" 1160 1145 

K4-LGI280ZM 1607 1834 555 432 2 x 2 1/2" 1379 1364 


5 - 153





[inch] 



25.98 21.65 1.1 23.62 0.24 14.37 0.87 4.75 8.27 7 0.677 1-8UNC 5.29 1.25 8.27 

Gearcase 


12.2 15.75 13.39 21.26 11.81 9.25 14.37 13.78 24.41 0.2 21.26 16.3 10.43 


6.69 17.32 13.78 3.15 2.46 18.58 2.91 22.05 38.41 M36x50 M24x32 M36x50 3.92 

Motor 



LA132SP 35.33 39.35 10.20 7.68 1" + 3/4" 1632 - 

LA132ZMP 37.15 41.16 10.20 7.68 1" + 3/4" 1652 - 

LA160MP 39.27 43.94 12.34 8.94 1" + 3/4" 1704 1674 

LA160ZLP 41.16 45.83 12.34 8.94 1" + 3/4" 1704 1674 

LG180ZMB 41.61 46.42 13.70 12.70 1 1/4" + 3/4" 1982 1949 

LG180ZLB 43.62 48.43 13.70 12.70 1 1/4" + 3/4" 1982 1949 

LG200LB 43.82 48.78 15.16 11.85 1 1/4" + 3/4" 2093 2059 

LG225S 46.61 56.02 17.40 12.80 2 x 1 1/2" 2254 2220 

LG225ZM 48.98 58.39 17.40 12.80 2 x 1 1/2" 2355 2322 

LG250ZM 50.94 60.35 17.40 12.80 2 x 1 1/2" 2679 2646 

K4-LGI280ZM 65.63 74.57 21.85 17.01 2 x 2 1/2" - 3008 


5 - 154 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



660 550 28 600 6 365 22 120,65 210 177,8 17,196 1“-8UNC 134,37 31,75 210 

Gearcase 


310 400 340 540 300 235 365 350 620 5 540 414 265 


170 440 350 80 62,5 472 74 560 975,5 M36x50 M24x32 M36x50 99,5 

Motor 



LA132SP 897.5 999.5 259 195 1" + 3/4" 740 - 

LA132ZMP 943.5 1045.5 259 195 1" + 3/4" 749 - 

LA160MP 997.5 1116 313.5 227 1" + 3/4" 773 759 

LA160ZLP 1045.5 1164 313.5 227 1" + 3/4" 773 759 

LG180ZMB 1057 1179 348 322.5 1 1/4" + 3/4" 899 884 

LG180ZLB 1108 1230 348 322.5 1 1/4" + 3/4" 899 884 

LG200LB 1113 1239 385 301 1 1/4" + 3/4" 949 934 

LG225S 1184 1423 442 325 2 x 1 1/2" 1022 1007 

LG225ZM 1244 1483 442 325 2 x 1 1/2" 1068 1053 

LG250ZM 1294 1533 442 325 2 x 1 1/2" 1215 1200 

K4-LGI280ZM 1667 1894 555 432 2 x 2 1/2" 1434 1364 


5 - 155



Shaft mounted 


FDA/FZA188B 

FDAZ/FZAZ188B 



15.75 11.81 13.78 0.2 M24x32 4.5 6.299 19.685 18.11 2.94 16.93 1-8UNC 4.959 1 8.661 20.04 

Gearcase 


12.2 15.75 13.39 21.26 11.81 9.25 14.37 13.78 15.75 24.41 0.2 21.26 16.3 10.43 6.69 17.32 

Motor 



LA132SP 32.97 36.99 10.20 7.68 1" + 3/4" 1372 - 

LA132ZMP 34.78 38.80 10.20 7.68 1" + 3/4" 1391 - 

LA160MP 36.91 41.57 12.34 8.94 1" + 3/4" 1444 1413 

LA160ZLP 38.80 43.46 12.34 8.94 1" + 3/4" 1444 1413 

LG180ZMB 39.25 44.06 13.70 12.70 1 1/4" + 3/4" 1722 1689 

LG180ZLB 41.26 46.06 13.70 12.70 1 1/4" + 3/4" 1722 1689 

LG200LB 41.46 46.42 15.16 11.85 1 1/4" + 3/4" 1832 1799 

LG225S 44.25 53.66 17.40 12.80 2 x 1 1/2" 1993 1960 

LG225ZM 46.61 56.02 17.40 12.80 2 x 1 1/2" 2095 2062 

LG250ZM 48.58 57.99 17.40 12.80 2 x 1 1/2" 2419 2386 

K4-LGI280ZM 63.27 72.20 21.85 17.01 2 x 2 1/2" - 2869 

5 - 156 

FA 510 

FAZ 510 

[inch] 


3.15 3.15 2.46 18.58 0.55 3.74 22.05 38.41 M36x50 M24x32 M36x50 1.56 4.33 24.41 1.3 1.97 


(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted 


FDA/FZA188B 

FDAZ/FZAZ188B 


FA 510 

FAZ 510 

[mm] 



400 300 350 5 M24x32 114,3 160 500 460 75 430 1“-8UNC 125,96 25,4 220 509 

Gearcase 


310 400 340 540 300 235 365 350 400 620 5 540 414 265 170 440 


80 80 62,5 472 14 95 560 975,5 M36x50 M24x32 M36x50 39,5 110 620 33 50 

Motor 



LA132SP 837.5 939.5 259 195 1" + 3/4" 622 - 

LA132ZMP 883.5 985.5 259 195 1" + 3/4" 631 - 

LA160MP 937.5 1056 313.5 227 1" + 3/4" 655 641 

LA160ZLP 985.5 1104 313.5 227 1" + 3/4" 655 641 

LG180ZMB 997 1119 348 322.5 1 1/4" + 3/4" 781 766 

LG180ZLB 1048 1170 348 322.5 1 1/4" + 3/4" 781 766 

LG200LB 1053 1179 385 301 1 1/4" + 3/4" 831 816 

LG225S 1124 1363 442 325 2 x 1 1/2" 904 889 

LG225ZM 1184 1423 442 325 2 x 1 1/2" 950 935 

LG250ZM 1234 1473 442 325 2 x 1 1/2" 1097 1082 

K4-LGI280ZM 1607 1834 555 432 2 x 2 1/2" 1316 1301 


5 - 157





[inch] 



25.98 21.65 1.1 23.62 0.24 2.36 0.87 6.1 4.5 6.299 19.685 18.11 2.94 16.93 1-8UNC 4.959 1 8.661 20.04 

Gearcase 


12.2 15.75 13.39 21.26 11.81 9.25 14.37 13.78 15.75 24.41 0.2 21.26 16.3 


10.43 6.69 17.32 5.51 3.15 2.46 18.58 2.91 22.05 38.41 M36x50 M24x32 M36x50 3.92 

Motor 



LA132SP 35.33 39.35 10.20 7.68 1" + 3/4" 1493 - 

LA132ZMP 37.15 41.16 10.20 7.68 1" + 3/4" 1513 - 

LA160MP 39.27 43.94 12.34 8.94 1" + 3/4" 1566 1535 

LA160ZLP 41.16 45.83 12.34 8.94 1" + 3/4" 1566 1535 

LG180ZMB 41.61 46.42 13.70 12.70 1 1/4" + 3/4" 1843 1810 

LG180ZLB 43.62 48.43 13.70 12.70 1 1/4" + 3/4" 1843 1810 

LG200LB 43.82 48.78 15.16 11.85 1 1/4" + 3/4" 1954 1921 

LG225S 46.61 56.02 17.40 12.80 2 x 1 1/2" 2115 2082 

LG225ZM 48.98 58.39 17.40 12.80 2 x 1 1/2" 2216 2183 

LG250ZM 50.94 60.35 17.40 12.80 2 x 1 1/2" 2540 2507 

K4-LGI280ZM 65.63 74.57 21.85 17.01 2 x 2 1/2" - 2990 


5 - 158 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





[mm] 



660 550 28 600 6 60 155 22 114,3 160 500 460 75 430 1“-8UNC 125,96 25,4 220 509 

Gearcase 


310 400 340 540 300 235 365 350 400 620 5 540 414 


265 170 440 140 80 62,5 472 74 560 975,5 M36x50 M24x32 M36x50 99,5 

Motor 



LA132SP 897.5 999.5 259 195 1" + 3/4" 677 - 

LA132ZMP 943.5 1045.5 259 195 1" + 3/4" 686 - 

LA160MP 997.5 1116 313.5 227 1" + 3/4" 710 696 

LA160ZLP 1045.5 1164 313.5 227 1" + 3/4" 710 696 

LG180ZMB 1057 1179 348 322.5 1 1/4" + 3/4" 836 821 

LG180ZLB 1108 1230 348 322.5 1 1/4" + 3/4" 836 821 

LG200LB 1113 1239 385 301 1 1/4" + 3/4" 886 871 

LG225S 1184 1423 442 325 2 x 1 1/2" 959 944 

LG225ZM 1244 1483 442 325 2 x 1 1/2" 1005 990 

LG250ZM 1294 1533 442 325 2 x 1 1/2" 1152 1137 

K4-LGI280ZM 1667 1894 555 432 2 x 2 1/2" 1371 1356 


5 - 159



housing flange mounted design (C-type) 

FD/FZ208-FDZ/FZZ208 

Motor 

FD/FZ208-FDZ/FZZ208 Weight [lb] 

Motor C CB P AB AA FD208-FDZ208 FZ208-FZZ208 

LA132SP 35.39 39.41 10.20 7.68 1" + 3/4" 2478 2412 

LA132ZMP 37.20 41.22 10.20 7.68 1" + 3/4" 2498 2432 

LA160MP 39.33 44.00 12.34 8.94 1" + 3/4" 2553 2487 

LA160ZLP 41.22 45.89 12.34 8.94 1" + 3/4" 2553 2487 

LG180ZMB 43.68 48.48 13.70 12.70 1 1/4" + 3/4" 2829 2763 

LG180ZLB 43.68 48.48 13.70 12.70 1 1/4" + 3/4" 2829 2763 

LG200LB 43.88 48.84 15.16 11.85 1 1/4" + 3/4" 2939 2873 

LG225S 46.67 56.08 17.40 12.80 2 x 1 1/2" 3100 3034 

LG225ZM 49.04 58.44 17.40 12.80 2 x 1 1/2" 3202 3136 

LG225YMB 51.00 60.41 17.40 12.80 3 x 1 1/2" 3257 3191 

K4-LGI250ZM 60.73 69.59 19.49 15.43 2 x 1 1/2" 3526 3460 

K4-LGI280ZM 65.69 74.63 21.85 17.01 2 x 2 1/2" 4009 3943 


5 - 160 

[INCH] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


housing flange mounted design (C-type) 

FD/FZ208-FDZ/FZZ208 


Motor 

FD/FZ208-FDZ/FZZ208 Weight [kg] 

Motor C CB P AB AA FD208-FDZ208 FZ208-FZZ208 

LA132SP 899 1001 259 195 1" + 3/4" 1124 1094 

LA132ZMP 945 1047 259 195 1" + 3/4" 1133 1103 

LA160MP 999 1117.5 313.5 227 1" + 3/4" 1158 1128 

LA160ZLP 1047 1165.5 313.5 227 1" + 3/4" 1158 1128 

LG180ZMB 1109.5 1231.5 348 322.5 1 1/4" + 3/4" 1283 1253 

LG180ZLB 1109.5 1231.5 348 322.5 1 1/4" + 3/4" 1283 1253 

LG200LB 1114.5 1240.5 385 301 1 1/4" + 3/4" 1333 1303 

LG225S 1185.5 1424.5 442 325 2 x 1 1/2" 1406 1376 

LG225ZM 1245.5 1484.5 442 325 2 x 1 1/2" 1452 1422 

LG225YMB 1295.5 1534.5 442 325 2 x 1 1/2" 1477 1447 

K4-LGI250ZM 1542.5 1767.5 495 392 2 x 2 1/2" 1599 1569 

K4-LGI280ZM 1668.5 1895.5 555 432 2 x 2 1/2" 1818 1788 


[MM] 

5 - 161



Shaft mounted design with shrink disk 

FDAS/FZAS208-FDAZS/FZAZS208 

Motor 

FDAS/FZAS208 

FDAZS/FZAZS208 Weight [lb] 

Motor C CB P AB AA FDAS/AZ208 FZAS/AZ208 

LA132SP 35.39 39.41 10.20 7.68 1" + 3/4" 2324 2262 

LA132ZMP 37.20 41.22 10.20 7.68 1" + 3/4" 2344 2282 

LA160MP 39.33 44.00 12.34 8.94 1" + 3/4" 2399 2337 

LA160ZLP 41.22 45.89 12.34 8.94 1" + 3/4" 2399 2337 

LG180ZMB 43.68 48.48 13.70 12.70 1 1/4" + 3/4" 2675 2613 

LG180ZLB 43.68 48.48 13.70 12.70 1 1/4" + 3/4" 2675 2613 

LG200LB 43.88 48.84 15.16 11.85 1 1/4" + 3/4" 2785 2723 

LG225S 46.67 56.08 17.40 12.80 2 x 1 1/2" 2946 2884 

LG225ZM 49.04 58.44 17.40 12.80 2 x 1 1/2" 3047 2986 

LG225YMB 51.00 60.41 17.40 12.80 3 x 1 1/2" 3102 3041 

K4-LGI250ZM 60.73 69.59 19.49 15.43 2 x 1 1/2" 3371 3310 

K4-LGI280ZM 65.69 74.63 21.85 17.01 2 x 2 1/2" 3854 3793 


5 - 162 

[INCH] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted design with shrink disk 

FDAS/FZAS208-FDAZS/FZAZS208 


Motor 

FDAS/FZAS208 

FDAZS/FZAZS208 Weight [kg] 

Motor C CB P AB AA FDAS/AZ208 FZAS/AZ208 

LA132SP 899 1001 259 195 1" + 3/4" 1054 1026 

LA132ZMP 945 1047 259 195 1" + 3/4" 1063 1035 

LA160MP 999 1117.5 313.5 227 1" + 3/4" 1088 1060 

LA160ZLP 1047 1165.5 313.5 227 1" + 3/4" 1088 1060 

LG180ZMB 1109.5 1231.5 348 322.5 1 1/4" + 3/4" 1213 1185 

LG180ZLB 1109.5 1231.5 348 322.5 1 1/4" + 3/4" 1213 1185 

LG200LB 1114.5 1240.5 385 301 1 1/4" + 3/4" 1263 1235 

LG225S 1185.5 1424.5 442 325 2 x 1 1/2" 1336 1308 

LG225ZM 1245.5 1484.5 442 325 2 x 1 1/2" 1382 1354 

LG225YMB 1295.5 1534.5 442 325 2 x 1 1/2" 1407 1379 

K4-LGI250ZM 1542.5 1767.5 495 392 2 x 2 1/2" 1529 1501 

K4-LGI280ZM 1668.5 1895.5 555 432 2 x 2 1/2" 1748 1720 


[mm] 

5 - 163



Shaft mounted design with torque arm 

FDADS/FZADS208 

Motor 

FDADS/FZADS208 Weight [lb] 

Motor C CB P AB AA FDADS208 FZADS208 

LA132SP 35.39 39.41 10.20 7.68 1" + 3/4" 2375 2313 

LA132ZMP 37.20 41.22 10.20 7.68 1" + 3/4" 2395 2333 

LA160MP 39.33 44.00 12.34 8.94 1" + 3/4" 2450 2388 

LA160ZLP 41.22 45.89 12.34 8.94 1" + 3/4" 2450 2388 

LG180ZMB 43.68 48.48 13.70 12.70 1 1/4" + 3/4" 2725 2664 

LG180ZLB 43.68 48.48 13.70 12.70 1 1/4" + 3/4" 2725 2664 

LG200LB 43.88 48.84 15.16 11.85 1 1/4" + 3/4" 2836 2774 

LG225S 46.67 56.08 17.40 12.80 2 x 1 1/2" 2997 2935 

LG225ZM 49.04 58.44 17.40 12.80 2 x 1 1/2" 3098 3036 

LG225YMB 51.00 60.41 17.40 12.80 3 x 1 1/2" 3153 3091 

K4-LGI250ZM 60.73 69.59 19.49 15.43 2 x 1 1/2" 3422 3360 

K4-LGI280ZM 65.69 74.63 21.85 17.01 2 x 2 1/2" 3905 3843 


5 - 164 

[INCH] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Shaft mounted design with torque arm 

FDADS/FZADS208 


Motor 

FDADS/FZADS208 Weight [kg] 

Motor C CB P AB AA FDADS208 FZADS208 

LA132SP 899 1001 259 195 1" + 3/4" 1077 1049 

LA132ZMP 945 1047 259 195 1" + 3/4" 1086 1058 

LA160MP 999 1117.5 313.5 227 1" + 3/4" 1111 1083 

LA160ZLP 1047 1165.5 313.5 227 1" + 3/4" 1111 1083 

LG180ZMB 1109.5 1231.5 348 322.5 1 1/4" + 3/4" 1236 1208 

LG180ZLB 1109.5 1231.5 348 322.5 1 1/4" + 3/4" 1236 1208 

LG200LB 1114.5 1240.5 385 301 1 1/4" + 3/4" 1286 1258 

LG225S 1185.5 1424.5 442 325 2 x 1 1/2" 1359 1331 

LG225ZM 1245.5 1484.5 442 325 2 x 1 1/2" 1405 1377 

LG225YMB 1295.5 1534.5 442 325 2 x 1 1/2" 1430 1402 

K4-LGI250ZM 1542.5 1767.5 495 392 2 x 2 1/2" 1552 1524 

K4-LGI280ZM 1668.5 1895.5 555 432 2 x 2 1/2" 1771 1743 


[mm] 

5 - 165



INCH 

Size 

5 - 166 

U 

[inch] 

UY 

[inch] 

V 

[inch] 

VO 

[inch] 

KEY 

[inch] 

TAP M 

[inch] 

F./F.F 28 

F./F.F 38B 

1 1.11 1.97 0.252 1/4 x 1/4 x 1 1/2 3/8 - 16 x 0.87 

F./F.F 48B 1 1/4 1.36 2.36 0.133 1/4 x 1/4 x 1 7/8 3/8 - 16 x 0.87 

F. 38B 1 3/8 1.51 2.76 0.027 5/16 x 5/16 x 2 3/8 3/8 - 16 x 0.87 

F. 48B 

F./F.F 68B 

1 5/8 1.79 3.15 0.065 3/8 x 3/8 x 2 3/4 5/8 - 11 x 1.42 

F. 68B 

F./F.F 88B 

2 2.22 3.94 0.004 1/2 x 1/2 x 3 1/2 3/4 - 10 x 1.65 

F./F.F 108B 2 3/8 2.65 4.72 0.002 5/8 x 5/8 x 4 1/4 3/4 - 10 x 1.65 

F. 88B 2 3/4 3.03 5.51 0.671 5/8 x 5/8 x 4 1/4 3/4 - 10 x 1.65 

F./F.F 128B 2 7/8 3.20 5.51 0.046 3/4 x 3/4 x 4 7/8 3/4 - 10 x 1.65 

F. 108B 3 3/16 3.52 6.69 0.834 3/4 x 3/4 x 4 7/8 3/4 - 10 x 1.65 

F. 128B 

F./F.F 148B 

3 5/8 4.01 6.69 0.602 7/8 x 7/8 x 5 1/2 1 - 8 x 1.97 

F. 148B 4 4.44 8.27 0.677 1 x 1 x 7 1 - 8 x 1.97 

F./F.F 168B 4 3/8 4.82 8.27 0.677 1 x 1 x 7 1 - 8 x 1.97 

F. 168B 

F./F.F 188B 

4 3/4 5.29 8.27 0.677 1 1/4 x 1 1/4 x 7 1 - 8 x 1.97 

METRIC 

Size U 

UY 

V 

VO 

KEY 

TAP M 

[mm] 

[mm] 

[mm] 

[mm] 

[mm] 

[mm] 

F./F.F 28 

F./F.F 38B 

25 28 50 5 8 x 7 x 40 M10 x 22 

F./F.F 48B 30 33 60 3.5 8 x 7 x 50 M10 x 22 

F./F.F 68B 40 43 80 5 12 x 8 x 70 M16 x 36 

F./F.F 88B 50 53.5 100 10 14 x 9 x 80 M16 x 36 

F./F.F 108B 60 64 120 5 18 x 11 x 110 M20 x 42 

F./F.F 128B 70 74.5 140 7.5 20 x 12 x 125 M20 x 42 

F./F.F 148B 90 95 170 15 25 x 14 x 140 M24 x 50 

F./F.F 168B 110 116 210 15 28 x 16 x 180 M24 x 50 

F./F.F 188B 120 127 210 15 32 x 18 x 180 M24 x 50 


(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Available Output Hollow Shafts Inch 

INCH 

Size 

VC 

[inch] 

EH 

[inch] 

EB 

[inch] 

U 

[inch] 

UF 

[inch] 

UY 

[inch] 


Y 

[inch] 

VG 

[inch] 

VH 

[inch] 

M BOLT 

[inch] 

FA. 28 4.09 4.21 1.58 1 1.58 1.12 1/4 3.5 1.547 3/8 - 16 UNC 

FA. 38B 4.72 4.84 1.73 

1 

1 1/4 

1.77 

1.12 

1.38 

1/4 

4.13 

4.02 

1.38 3/8 - 16 UNC 

FA. 48B 5.91 6.02 2.28 

1 3/8 

1 1/2 

2.17 

1.53 

1.68 

5/16 

3/8 

5.04 

1.37 

1.93 

3/8 - 16 UNC 

FA. 68B 7.09 7.20 2.72 

1 1/2 

1 3/4 

2.56 

1.68 

1.87 * 

3/8 5.91 1.93 

5/8 - 11 UNC 

5/8 - 11 UNC 

FA. 88B 8.27 8.39 3.07 

2 

2 3/8 

3.15 

2.23 

2.47 * 

1/2 

5/8 

7.09 1.62 3/4 - 10 UNC 

FA. 108B 9.45 9.61 3.66 

2 3/8 

2 7/16 3.74 

2.66 

2.72 5/8 8.19 

2.37 

3/4 - 10 UNC 

2 3/4 2.92 * 2.35 

2 3/4 

3.04 5/8 

2.35 

FA. 128B 11.81 11.97 4.84 2 15/16 

3 1/4 

4.33 3.28 

3.41 * 

3/4 

10.35 2.27 

2.15 

3/4 - 10 UNC 

FA. 148B 13.78 13.94 5.83 

3 7/16 

3 5/8 

4.72 

3.70 * 

3.84 * 

7/8 12.2 2.10 1 - 8 UNC 

FA. 168B 16.14 16.30 6.89 

4 

4 1/2 

5.91 

4.45 

4.83 * 

1 14.41 

2.09 

1.94 

1 - 8 UNC 

FA. 188B 19.69 20.04 8.66 4 1/2 6.30 4.95 1 18.11 2.94 1 - 8 UNC 

Tolerances see page 1 - 4. * rectangular key have to be used 

5 - 167


Available Output Hollow Shafts Metric 

METRIC 

Size 

5 - 168 

VC 

[mm] 

EH 

[mm] 

EB 

[mm] 

U 

[mm] 

UF 

[mm] 

UY 

[mm] 

Y 

[mm] 

VG 

[mm] 

VH 

[mm] 

M BOLT 

[mm] 

FA. 28 104 106 40 25 40 28.3 8 89 27.6 M10 x 30 

FA. 38B 120 123 44 30 45 33.3 8 102 31 M10 x 40 

FA. 48B 150 153 58 

40 

35 

55 

43.3 

38.3 

12 

10 

128 

48 

40 

M16 x 60 

M12 x 50 

FA. 68B 180 183 69 

45 

40 

65 

48.8 

43.3 

14 

12 

150 

47 

48 

M16 x 60 

FA. 88B 210 213 78 

60 

50 

80 

64.4 

53.8 

18 

14 

180 

54 

44.5 

M20 x 70 

M16 x 60 

FA. 108B 240 244 93 

70 

60 

95 

74.9 

64.4 

20 

18 

208 63.5 M20 x 80 

FA. 128B 300 304 123 

80 

70 

110 

85.4 

74.9 

22 

20 

263 63.5 

M20 x 85 

M20 x 80 

FA. 148B 350 354 148 

90 

80 

120 

95.4 

85.4 

25 

22 

310 

72 

63.5 

M24 x 95 

M20 x 85 

FA. 168B 410 414 175 

110 

100 

150 

116.4 

106.4 

28 366 

73 

72 

M24 x 100 

M24 x 95 

FA. 188B 500 510 220 120 160 127.4 32 460 71 M24 x 100 

Tolerances see page 1 - 4. 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Parallel shaft gear motors shaft mounted with shrink disk 

Model U UA 

[inch] 

[mm] 

F.A.S28 

F.A.S38B 

F.A.S48B 

F.A.S68B 

F.A.S88B 

F.A.S108B 

F.A.S128B 

F.A.S148B 

F.A.S168B 

F.A.S188B 

UG UH 

[inch] 

[mm] 

VL 

[inch] 

[mm] 

TA 

[inch] 

[mm] 

TB 

[inch] 

[mm] 

TC 

[inch] 

[mm] 


TD 

[inch] 

[mm] 

PA 

[inch] 

[mm] 

EH 

[inch] 

[mm] 

1) 

Motor size 

- - 4.96 0.79 0.98 0.98 1.18 2.28 5.33 

25 25 126 20 25 25 30 58 135.5 100 * 

- - 5.75 0.79 0.98 0.87 1.06 3.03 6.06 

30 30 146 20 25 22 27 77 154 100 

- - 6.97 0.79 0.98 0.98 1.18 3.66 7.24 

40 40 177 20 25 25 30 93 184 112 

- - 8.23 0.79 0.98 1.06 1.26 4.41 8.50 

50 50 209 20 25 27 32 112 216 132 

- - 9.49 1.18 1.38 1.14 1.34 5.20 9.80 

60 60 241 30 35 29 34 132 249 160 

- - 11.02 1.57 1.77 1.18 1.38 5.67 11.34 

70 70 280 40 45 30 35 144 288 200 

- - 13.58 1.97 2.17 1.57 1.77 7.09 14.06 

80 80 345 50 55 40 45 180 357 225 

- - 15.91 2.36 2.56 1.93 2.13 8.27 16.46 

95 95 404 60 65 49 54 210 418 250 

- - 19.02 2.76 2.95 2.13 2.32 9.33 19.53 

105 105 483 70 75 54 59 237 496 280 

- - 22.83 3.15 3.35 2.44 2.64 10.35 23.31 

125 125 580 80 85 62 67 263 592 315 

1) Largest mountable motor size Tolerances see page1 - 4 

*) F.A.S 28-90 not possible Minimum strength of machines drive shaft 50000psi (360N/mm 2 ) 

5 - 169


Tandem-Parallel Shaft Gear Motors 

5 - 170 

FDZ 710 


LA71 5.47 13.31 15.47 7.97 

LA71 1) 5.47 18.33 20.49 10.18 

LA71Z 5.47 14.06 16.22 8.72 LA71Z 1) 5.47 19.07 21.24 10.93 

FZ.38B-Z28 LA90S 6.85 17.13 19.92 11.79 LA80 1) 6.16 19.78 22.28 11.63 

LA90ZL 6.85 20.67 23.46 15.33 LA90S 1) 6.85 21.00 23.80 12.85 

LA100L 7.68 23.11 26.30 17.78 LA90ZL 1) 6.85 22.78 25.57 14.63 

LA71 5.47 13.31 15.47 7.97 LA100L 1) 7.68 25.57 28.76 17.42 

FZ.38B-D28 

LA71Z 

LA90S 

5.47 

6.85 

14.06 

17.13 

16.22 

19.92 

8.72 

11.79 

FD.108B-Z38 

LA112M 1) 

LA71 2) 

8.62 

5.47 

25.08 

18.74 

28.27 

20.91 

16.93 

10.18 

LA90ZL 6.85 20.67 23.46 15.33 LA71Z 2) 5.47 19.49 21.65 10.93 

LA71 5.47 14.29 16.46 7.97 LA80 2) 6.16 20.20 22.70 11.63 

LA71Z 5.47 15.04 17.20 8.72 LA90S 2) 6.85 21.42 24.21 12.85 

FD.48B-Z28 LA90S 6.85 18.11 20.91 11.79 LA90ZL 2) 6.85 23.19 25.98 14.63 

LA90ZL 6.85 21.65 24.45 15.33 LA100L 2) 7.68 25.98 29.17 17.42 

LA100L 7.68 24.09 27.28 17.78 LA112M 2) 8.62 25.49 28.68 16.93 

LA71 5.47 14.29 16.46 7.97 

LA71 5.47 18.92 21.08 10.77 

FD.48B-D28 

LA71Z 

LA90S 

5.47 

6.85 

15.04 

18.11 

17.20 

20.91 

8.72 

11.79 FD.108B-D38 

LA71Z 

LA80 

5.47 

6.16 

19.67 

20.37 

21.83 

22.87 

11.52 

12.22 

LA90ZL 6.85 21.65 24.45 15.33 LA90S 6.85 21.59 24.39 13.44 

LA71 5.47 14.07 16.24 7.97 LA90ZL 6.85 23.37 26.16 15.22 

LA71Z 5.47 14.82 16.99 8.72 

LA71 5.47 18.05 20.22 10.18 

FD.68B-Z28 LA90S 6.85 17.89 20.69 11.79 LA71Z 5.47 18.80 20.96 10.93 

LA90ZL 6.85 21.44 24.23 15.33 LA80 6.16 19.51 22.01 11.63 

LA100L 7.68 23.88 27.07 17.78 FD.128B-Z38 LA90S 6.85 20.73 23.52 12.85 

LA71 5.47 14.07 16.24 7.97 LA90ZL 6.85 22.50 25.30 14.63 

FD.68B-D28 

LA71Z 

LA90S 

5.47 

6.85 

14.82 

17.89 

16.99 

20.69 

8.72 

11.79 

LA100L 

LA112M 

7.68 

8.62 

25.30 

24.80 

28.48 

27.99 

17.42 

16.93 

LA90ZL 6.85 21.44 24.23 15.33 

LA71 5.47 18.64 20.81 10.77 

LA71 5.47 13.84 16.00 7.97 LA71Z 5.47 19.39 21.56 11.52 

LA71Z 5.47 14.59 16.75 8.72 FD.128B-D38 LA80 6.16 20.10 22.60 12.22 

FD.88B-Z28 LA90S 6.85 17.66 20.45 11.79 LA90S 6.85 21.32 24.11 13.44 

LA90ZL 6.85 21.20 24.00 15.33 LA90ZL 6.85 23.09 25.89 15.22 

LA100L 7.68 23.64 26.83 17.78 

LA71 5.47 20.94 23.11 9.96 

LA71 5.47 13.84 16.00 7.97 LA71Z 5.47 21.69 23.86 10.71 

FD.88B-D28 

LA71Z 

LA90S 

5.47 

6.85 

14.59 

17.66 

16.75 

20.45 

8.72 

11.79 

FD.128B-Z48 LA80 

LA90S 

6.16 

6.85 

22.40 

23.62 

24.90 

26.42 

11.42 

12.64 

LA90ZL 6.85 21.20 24.00 15.33 LA90ZL 6.85 25.39 28.19 14.41 

1) i ges≥1647 2) i ges




(450) 655-7447 


www.dstech.ca 



FDZ 710 


LA100L 7.68 28.19 31.38 17.20 

LA71 5.47 20.89 23.05 10.63 

FD.128B-Z48 

LA112M 

LA132S 

LA132ZM 

8.62 

10.20 

10.20 

27.68 

29.02 

30.83 

30.87 

33.03 

34.84 

16.69 

18.03 

19.84 

FD.168B-D48 

LA71Z 

LA80 

LA90S 

5.47 

6.16 

6.85 

21.63 

22.34 

23.56 

23.80 

24.84 

26.36 

11.38 

12.09 

13.31 

LA71 5.47 17.87 20.04 10.18 LA90ZL 6.85 25.33 28.13 15.08 

LA71Z 5.47 18.62 20.79 10.93 LA100L 7.68 28.13 31.32 17.87 

LA80 6.16 19.33 21.83 11.63 

LA71 5.47 22.95 25.12 9.72 

FD.148B-Z38 LA90S 6.85 20.55 23.35 12.85 LA71Z 5.47 23.70 25.87 10.47 

LA90ZL 6.85 22.32 25.12 14.63 LA80 6.16 24.41 26.91 11.18 

LA100L 7.68 25.12 28.31 17.42 LA90S 6.85 25.63 28.43 12.40 

LA112M 8.62 24.63 27.81 16.93 LA90ZL 6.85 27.40 30.20 14.17 

LA71 5.47 18.46 20.63 10.77 FD.168B-Z68 LA100L 7.68 30.20 33.39 16.97 

LA71Z 5.47 19.21 21.38 11.52 LA112M 8.62 29.61 32.80 16.38 

FD.148B-D38 LA80 6.16 19.92 22.42 12.22 LA132S 10.20 30.87 34.88 17.64 

LA90S 6.85 21.14 23.94 13.44 LA132ZM 10.20 32.68 36.69 19.45 

LA90ZL 6.85 22.91 25.71 15.22 LA160M 12.34 34.90 39.57 21.67 

LA71 5.47 20.53 22.70 9.96 LA160ZL 12.34 36.79 41.46 23.56 

LA71Z 5.47 21.28 23.44 10.71 

LA71 5.47 19.65 21.81 9.96 

LA80 6.16 21.99 24.49 11.42 LA71Z 5.47 20.39 22.56 10.71 

LA90S 6.85 23.21 26.00 12.64 LA80 6.16 21.10 23.60 11.42 

FD.148B-Z48 LA90ZL 6.85 24.98 27.78 14.41 LA90S 6.85 22.32 25.12 12.64 

LA100L 7.68 27.78 30.96 17.20 FD.188B-Z48 LA90ZL 6.85 24.09 26.89 14.41 

LA112M 8.62 27.26 30.45 16.69 LA100L 7.68 26.89 30.08 17.20 

LA132S 10.20 28.60 32.62 18.03 LA112M 8.62 26.38 29.57 16.69 

LA132ZM 10.20 30.10 34.11 19.84 LA132S 10.20 27.72 31.73 18.03 

LA71 5.47 20.22 22.38 LA132ZM 10.20 29.53 33.54 19.84 

LA71Z 5.47 20.96 23.13 10.71 

LA71 5.47 20.31 22.48 10.63 

LA80 6.16 21.67 24.17 11.42 LA71Z 5.47 21.06 23.23 11.38 

FD.168B-Z48 

LA90S 

LA90ZL 

6.85 

6.85 

22.89 

24.67 

25.69 

27.46 

12.64 

14.41 

FD.188B-D48 

LA80 

LA90S 

6.16 

6.85 

21.77 

22.99 

24.27 

25.79 

12.09 

13.31 

LA100L 7.68 27.46 30.65 17.20 LA90ZL 6.85 24.76 27.56 15.08 

LA112M 8.62 26.95 30.14 16.69 LA100L 7.68 27.56 30.75 17.87 

LA132S 10.20 28.29 32.30 18.03 

LA132ZM 10.20 30.10 34.11 19.84 

[inch] 

5 - 171



Gear Units P PC PCB C 

LA71 5.47 23.03 25.20 9.72 

LA71Z 5.47 23.78 25.94 10.47 

LA80 6.16 24.49 26.99 11.18 

LA90S 6.85 25.71 28.50 12.40 

LA90ZL 6.85 27.48 30.28 14.17 

FD.188B-Z68 LA100L 7.68 30.28 33.46 16.97 

LA112M 8.62 29.69 32.87 16.38 

LA132S 10.20 30.94 34.96 17.64 

LA132ZM 10.20 32.76 36.77 19.45 

LA160M 12.34 34.98 39.65 21.67 

LA160ZL 12.34 36.87 41.54 23.56 

LA71 5.47 23.03 25.20 9.72 

LA71Z 5.47 23.78 25.94 10.47 

LA80 6.16 24.49 26.99 11.18 

LA90S 6.85 25.71 28.50 12.40 

LA90ZL 6.85 27.48 30.28 14.17 

FD.208-Z68 LA100L 7.68 30.28 33.46 16.97 

LA112M 8.62 29.69 32.87 16.38 

LA132S 10.20 30.94 34.96 17.64 

LA132ZM 10.20 32.76 36.77 19.45 

LA160M 12.34 34.98 39.65 21.67 

LA160ZL 12.34 36.87 41.54 23.56 

LA71 5.47 23.76 25.93 10.45 

LA71Z 5.47 24.51 26.67 11.20 

FD.208-D68 

LA80 

LA90S 

6.16 

6.85 

25.22 

26.44 

27.72 

29.23 

11.91 

13.13 

LA90ZL 6.85 28.21 31.00 14.90 

LA100L 7.68 31.00 34.19 17.70 

LA90S 6.85 30.57 33.37 11.81 

LA90ZL 6.85 32.34 35.14 13.58 

LA100L 7.68 35.04 38.23 16.28 

FD.208-Z88 

LA112M 

LA132S 

8.62 

10.20 

34.41 

35.67 

37.60 

39.69 

15.65 

16.91 

LA132ZM 10.20 37.48 41.50 18.72 

LA160M 12.34 39.78 44.45 21.02 

LA160ZL 12.34 41.67 46.34 22.91 

5 - 172 

FDZ 710 

[inch] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



FDZ 710 


LA71 139.0 338.0 393.0 202.5 

LA71 1) 139.0 465.5 520.5 258.5 

LA71Z 139.0 357.0 412.0 221.5 LA71Z 1) 139.0 484.5 539.5 277.5 

FZ.38B-Z28 LA90S 174.0 435.0 506.0 299.5 LA80 1) 156.5 502.5 566.0 295.5 

LA90ZL 174.0 525.0 596.0 389.5 LA90S 1) 174.0 533.5 604.5 326.5 

LA100L 195.0 587.0 668.0 451.5 LA90ZL 1) 174.0 578.5 649.5 371.5 

LA71 139.0 338.0 393.0 202.5 LA100L 1) 195.0 649.5 730.5 442.5 

FZ.38B-D28 

LA71Z 

LA90S 

139.0 

174.0 

357.0 

435.0 

412.0 

506.0 

221.5 

299.5 

FD.108B-Z38 

LA112M 1) 

LA71 2) 

219.0 

139.0 

637.0 

476.0 

718.0 

531.0 

430.0 

258.5 

LA90ZL 174.0 525.0 596.0 389.5 LA71Z 2) 139.0 495.0 550.0 277.5 

LA71 139.0 363.0 418.0 202.5 LA80 2) 156.5 513.0 576.5 295.5 

LA71Z 139.0 382.0 437.0 221.5 LA90S 2) 174.0 544.0 615.0 326.5 

FD.48B-Z28 LA90S 174.0 460.0 531.0 299.5 LA90ZL 2) 174.0 589.0 660.0 371.5 

LA90ZL 174.0 550.0 621.0 389.5 LA100L 2) 195.0 660.0 741.0 442.5 

LA100L 195.0 612.0 693.0 451.5 LA112M 2) 219.0 647.5 728.5 430.0 

LA71 139.0 363.0 418.0 202.5 

LA71 139.0 480.5 535.5 273.5 

FD.48B-D28 

LA71Z 

LA90S 

139.0 

174.0 

382.0 

460.0 

437.0 

531.0 

221.5 

299.5 FD.108B-D38 

LA71Z 

LA80 

139.0 

156.5 

499.5 

517.5 

554.5 

581.0 

292.5 

310.5 

LA90ZL 174.0 550.0 621.0 389.5 LA90S 174.0 548.5 619.5 341.5 

LA71 139.0 357.5 412.5 202.5 LA90ZL 174.0 593.5 664.5 386.5 

LA71Z 139.0 376.5 431.5 221.5 

LA71 139.0 458.5 513.5 258.5 

FD.68B-Z28 LA90S 174.0 454.5 525.5 299.5 LA71Z 139.0 477.5 532.5 277.5 

LA90ZL 174.0 544.5 615.5 389.5 LA80 156.5 495.5 559.0 295.5 

LA100L 195.0 606.5 687.5 451.5 FD.128B-Z38 LA90S 174.0 526.5 597.5 326.5 

LA71 139.0 357.5 412.5 202.5 LA90ZL 174.0 571.5 642.5 371.5 

FD.68B-D28 

LA71Z 

LA90S 

139.0 

174.0 

376.5 

454.5 

431.5 

525.5 

221.5 

299.5 

LA100L 

LA112M 

195.0 

219.0 

642.5 

630.0 

723.5 

711.0 

442.5 

430.0 

LA90ZL 174.0 544.5 615.5 389.5 

LA71 139.0 473.5 528.5 273.5 

LA71 139.0 351.5 406.5 202.5 LA71Z 139.0 492.5 547.5 292.5 

LA71Z 139.0 370.5 425.5 221.5 FD.128B-D38 LA80 156.5 510.5 574.0 310.5 

FD.88B-Z28 LA90S 174.0 448.5 519.5 299.5 LA90S 174.0 541.5 612.5 341.5 

LA90ZL 174.0 538.5 609.5 389.5 LA90ZL 174.0 586.5 657.5 386.5 

LA100L 195.0 600.5 681.5 451.5 

LA71 139.0 532.0 587.0 253.0 

LA71 139.0 351.5 406.5 202.5 LA71Z 139.0 551.0 606.0 272.0 

FD.88B-D28 

LA71Z 

LA90S 

139.0 

174.0 

370.5 

448.5 

425.5 

519.5 

221.5 

299.5 

FD.128B-Z48 LA80 

LA90S 

156.5 

174.0 

569.0 

600.0 

632.5 

671.0 

290.0 

321.0 

LA90ZL 174.0 538.5 609.5 389.5 LA90ZL 174.0 645.0 716.0 366.0 

1) i ges ≥1647 2) i ges



5 - 174 

FDZ 710 


FD.128B-Z48 

LA100L 

LA112M 

LA132S 

195.0 

219.0 

259.0 

716.0 

703.0 

737.0 

797.0 

784.0 

839.0 

437.0 

424.0 

458.0 

FD.168B-Z48 

LA132S 

LA132ZM 

LA71 

259.0 

259.0 

139.0 

718.5 

764.5 

530.5 

820.5 

866.5 

585.5 

458.0 

504.0 

270.0 

LA132ZM 259.0 783.0 885.0 504.0 LA71Z 139.0 549.5 604.5 289.0 

LA71 

LA71Z 

139.0 

139.0 

454.0 

473.0 

509.0 

528.0 

258.5 

277.5 

FD.168B-D48 

LA80 

LA90S 

156.5 

174.0 

567.5 

598.5 

631.0 

669.5 

307.0 

338.0 

LA80 156.5 491.0 554.5 295.5 LA90ZL 174.0 643.5 714.5 383.0 

FD.148B-Z38 LA90S 174.0 522.0 593.0 326.5 LA100L 195.0 714.5 795.5 454.0 

LA90ZL 174.0 567.0 638.0 371.5 

LA71 139.0 583.0 638.0 247.0 

LA100L 195.0 638.0 719.0 442.5 LA71Z 139.0 602.0 657.0 266.0 

LA112M 219.0 625.5 706.5 430.0 LA80 156.5 620.0 683.5 284.0 

LA71 139.0 469.0 524.0 273.5 LA90S 174.0 651.0 722.0 315.0 

LA71Z 139.0 488.0 543.0 292.5 LA90ZL 174.0 696.0 767.0 360.0 

FD.148B-D38 LA80 156.5 506.0 569.5 310.5 FD.168-Z68 LA100L 195.0 767.0 848.0 431.0 

LA90S 174.0 537.0 608.0 341.5 LA112M 219.0 752.0 833.0 416.0 

LA90ZL 174.0 582.0 653.0 386.5 LA132S 259.0 784.0 886.0 448.0 

LA71 139.0 521.5 576.5 253.0 LA132ZM 259.0 830.0 932.0 494.0 

LA71Z 139.0 540.5 595.5 272.0 LA160M 313.5 886.5 1005.0 550.5 

LA80 156.5 558.5 622.0 290.0 LA160ZL 313.5 934.5 1053.0 598.5 

LA90S 174.0 589.5 660.5 321.0 

LA71 139.0 499.0 554.0 253.0 

FD.148B-Z48 LA90ZL 174.0 634.5 705.5 366.0 LA71Z 139.0 518.0 573.0 272.0 

LA100L 195.0 705.5 786.5 437.0 LA80 156.5 536.0 599.5 290.0 

LA112M 219.0 692.5 773.5 424.0 LA90S 174.0 567.0 638.0 321.0 

LA132S 259.0 726.5 828.5 458.0 FD.188B-Z48 LA90ZL 174.0 612.0 683.0 366.0 

LA132ZM 259.0 764.5 866.5 504.0 LA100L 195.0 683.0 764.0 437.0 

LA71 139.0 513.5 568.5 LA112M 219.0 670.0 751.0 424.0 

LA71Z 139.0 532.5 587.5 272.0 LA132S 259.0 704.0 806.0 458.0 

LA80 156.5 550.5 614.0 290.0 LA132ZM 259.0 750.0 852.0 504.0 

FD.168B-Z48 LA90S 174.0 581.5 652.5 321.0 

LA71 139.0 516.0 571.0 270.0 

LA90ZL 174.0 626.5 697.5 366.0 LA71Z 139.0 535.0 590.0 289.0 

LA100L 

LA112M 

195.0 

219.0 

697.5 

684.5 

778.5 

765.5 

437.0 

424.0 

FD.188B-D48 

LA80 

LA90S 

156.5 

174.0 

553.0 

584.0 

616.5 

655.0 

307.0 

338.0 

LA90ZL 174.0 629.0 700.0 383.0 

LA100L 195.0 700.0 781.0 454.0 

[mm] 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Gear Units P PC PCB C 

LA71 139.0 585.0 640.0 247.0 

LA71Z 139.0 604.0 659.0 266.0 

LA80 156.5 622.0 685.5 284.0 

LA90S 174.0 653.0 724.0 315.0 

LA90ZL 174.0 698.0 769.0 360.0 

FD.188B-Z68 LA100L 195.0 769.0 850.0 431.0 

LA112M 219.0 754.0 835.0 416.0 

LA132S 259.0 786.0 888.0 448.0 

LA132ZM 259.0 832.0 934.0 494.0 

LA160M 313.5 888.5 1007.0 550.5 

LA160ZL 313.5 936.5 1055.0 598.5 

LA71 139.0 585.0 640.0 247.0 

LA71Z 139.0 604.0 659.0 266.0 

LA80 156.5 622.0 685.5 284.0 

LA90S 174.0 653.0 724.0 315.0 

LA90ZL 174.0 698.0 769.0 360.0 

FD.208-Z68 LA100L 195.0 769.0 850.0 431.0 

LA112M 219.0 754.0 835.0 416.0 

LA132S 259.0 786.0 888.0 448.0 

LA132ZM 259.0 832.0 934.0 494.0 

LA160M 313.5 888.5 1007.0 550.5 

LA160ZL 313.5 936.5 1055.0 598.5 

LA71 139.0 603.5 658.5 265.5 

LA71Z 139.0 622.5 677.5 284.5 

FD.208-D68 

LA80 

LA90S 

156.5 

174.0 

640.5 

671.5 

704.0 

742.5 

302.5 

333.5 

LA90ZL 174.0 716.5 787.5 378.5 

LA100L 195.0 787.5 868.5 449.5 

LA90S 174.0 776.5 847.5 300.0 

LA90ZL 174.0 821.5 892.5 345.0 

LA100L 195.0 890.0 971.0 413.5 

FD.208-Z88 

LA112M 

LA132S 

219.0 

259.0 

874.0 

906.0 

955.0 

1008.0 

397.5 

429.5 

LA132ZM 259.0 952.0 1054.0 475.5 

LA160M 313.5 1010.5 1129.0 534.0 

LA160ZL 313.5 1058.5 1177.0 582.0 


FDZ 710 

[mm] 

5 - 175


Parallel Shaft Gear Units flange mounted for Mixer/Agitator 

Mixer-Design FAM/FM 







an additional „V“-Ring (1) and detecting the leakage either through a sight glass or electronic sensor (2). 

Optional Re-Greasing System 



on request or in electronic cataloque. 

5 - 176 

2 

1 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Parallel Shaft Gear Units Flange mounted for Mixer / Agitator 


Inch 

Dimensions in 

mm 

Model BD AK GA AJ BB BF GL BA AM BE XF GB U V3 VO Y TAP M Add. 

V UY 

Weight* 

FDM/FZM88B 

FDM/FZM108B 

FDM/FZM128B 

FDM/FZM148B 

BD ≥ 17.72" 

BD ≥ 450 mm 

11.81 9.06 0.79 10.43 0.16 0.53 4.72 11.28 5.51 11.08 4.96 6.89 

70 

4.33 0.59 

300 230 20 265 4 13.5 120 286.5 140 281.5 126 175 5.51 

140 

110 15 

13.78 9.84 0.79 11.81 0.20 0.69 5.31 13.13 6.69 12.56 5.53 8.07 4.92 0.79 

80 

350 250 20 300 5 17.5 135 333.5 170 319 140.5 205 6.69 125 20 

170 

17.72 13.78 0.98 15.75 0.20 0.69 6.50 14.70 6.69 14.31 6.77 10.67 5.51 0.59 

90 

450 350 25 400 5 17.5 165 373.5 170 363.5 172 271 6.69 140 15 

170 

17.72 13.78 0.98 15.75 0.20 0.69 7.28 17.68 8.27 16.85 8.31 11.73 7.09 0.59 

100 

450 350 25 400 5 17.5 185 449 210 428 211 298 8.27 180 15 

210 

20 

2.93 

74.5 

22 

3.35 

85 

25 

3.74 

95 

28 

4.17 

106 

M20 x 42 

M20 x 42 

M24 x 50 

M24 x 50 

FDM/FZM168B 

21.65 17.72 1.10 19.69 0.20 

550 450 28 500 5 

0.69 

17.5 

8.27 18.86 8.27 17.76 

210 479 210 451 

9.33 13.23 

237 336 

120 

7.09 0.59 

32 

M24 x 50 

389 

8.27 210 

180 15 

5.00 

127 

177 


* To get the weight of the complete drive, the additional weight must be added to the weight of the gear unit in flange design FDA.B/FZA.B 

Eg:- Weight FZA88B-LA112M (207 lb / 94 kg) + additional weight FM88B (64 lb / 29 kg) = total weight FM88B-LA112M (262 lb / 123 kg) 

64 

29 

105 

48 

182 

82 

234 

106 

5 - 177


Parallel Shaft Gear Units Shaft mounted with flange for Mixer / Agitator 

Inch 

Dimensions in 

Model BD AK GA AJ BB GL BA BE GB EH U UF EB VG VH VL Y 

mm 

M BOLT Add.Weight* 

BF XF VC UY 

FDAM/FZAM88B 

11.81 9.06 0.79 10.43 6.89 12.76 

0.16 4.72 5.77 5.57 

265 175 324 

0.53 

300 230 20 4 120 146.5 141.5 

3.15 3.07 11.46 2.13 10.83 

18 

M20 

39 

4.96 12.64 60 80 78 291 54 275 2.54 

13.5 126 321 64.4 

18 

FDAM/FZAM108B 

13.78 9.84 0.79 11.81 0.20 5.31 6.44 

300 

0.69 

350 250 20 5 135 163.5 

5.87 

149 

8.07 14.55 

205 369.5 

3.74 3.66 13.15 2.50 12.20 

20 

M20 

66 

5.53 14.41 70 95 93 334 63.5 310 2.95 

17.5 140.5 366 74.9 

30 

FDAM/FZAM128B 

17.72 13.78 0.98 15.75 10.67 18.03 

0.20 6.50 8.01 7.62 

400 271 458 

0.69 

450 350 25 5 165 203.5 193.5 

4.33 4.84 16.50 2.50 15.55 

22 

M20 

123 

6.77 17.95 80 110 123 419 63.5 395 3.36 

17.5 172 456 85.4 

56 

FDAM/FZAM148B 

17.72 13.78 0.98 15.75 0.20 7.28 

400 

0.69 

450 350 25 5 185 

9.41 

239 

11.73 20.71 

8.58 

298 526 

218 

4.72 5.83 19.06 2.83 18.11 

25 

M24 

148 

8.31 20.63 90 120 148 484 72 460 3.76 

17.5 211 524 95.4 

67 

FDAM/FZAM168B 

21.65 17.72 1.10 19.69 13.23 24.06 

0.20 8.27 10.59 9.49 

500 336 611 

0.69 

550 450 28 5 210 269 241 

5.91 6.89 22.24 2.87 21.26 

28 

M24 

248 

9.33 23.98 110 150 175 565 73 540 4.58 

17.5 237 609 116.4 

113 


* To get the weight of the complete drive, the additional weight must be added to the weight of the gear unit in flange design FDA.B / FZA.B 

Eg:- Weight FZA88B-LA112M (207 lb / 94 kg) + additional weight FAM88B (40 lb / 18 kg) = total weight FAM88B-LA112M (247 lb / 112 kg) 

5 - 178 

BD ≥ 17.72" 

BD ≥ 450 mm 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Flange mounted for Extruder Drives FAE 

3 4 5 

1. Large Spherical Roller Bearing - 294... Series of Spherical Roller Bearings to carry heavy Axial Loads. 

2. Simple, Cost-effective Design - Customer Connecting Hub without any Grinding Process.Standard Shaft-Hub Connection by 

Key acc. DIN 6885/1. 

3. High Accuracy - Customer-side Centering and Radial Bearing Bore machined in One Setting and from One Direction. 

4. Optimized Lubrication - Extruder Flange Lubrication isolated from Gearbox Lubrication. 

5. Standard Connections - Metric thread for support of extruder screw (disassembly of extruder screw to the back end). 

Scope of Application 

12 

Parallel Shaft Gear Unit F.AE 68B F.AE 88B F.AE 108B F.AE 128B F.AE 148B F.AE 168B 

Maximum Power [hp] 12.5 20 30 60 75 120 

Min / Max Ratio [2-stage] 3.97 / 61.17 4.77 / 64.58 5.68 / 64.21 3.8 / 56.42 5.39 / 68.23 5.28 / 53.48 

Maximum Torque [lb-in] 8800 16800 30000 54000 79600 124000 

Thrust Bearing [.] 29414E 29417E 29420E 29424E 29426E 29432E 

Screw-ø [mm] 

20 X 

25 X 

30 X X 

35 O X 

38 X 

40 X X 

45 O X X 

50 O X X 

60 O X X 

70 O X X 

75 X X 

80 O X 

90 X 

100 O 

X Extruder Screw Extraction towards the front / back end O Extruder Screw Extraction only towards the front end 

5 - 179


Parallel Shaft Helical Gear Motors with Extruder Flange 

Flange 

Inch 

Dimensions in 

mm 

Model BD AK AJ BB TAP BF GL BA BE AM XF Q 

FD/ZAE 68B 

10.24 

260 

8.66 

220 

+0.0018 / 0 

+0.046 / 0 

9.29 

236 

0.39 

10 M12x17 

5.81 

147.5 

6.85 

174 

- 

0.59 

15 

6.14 

156 

5.45 

138.5 

FD/ZAE 88B 

12.21 

310 

10.04 

255 

+0.0021 / 0 

+0.052 / 0 

11.02 

280 

0.39 

10 M16x22 

6.73 

171 

7.78 

197.5 

7.58 

192.5 

0.61 

15.5 

6.97 

177 

6.89 

175 

FD/ZAE 108B 

14.17 

360 

12.01 

305 

+0.0021 / 0 

+0.052 / 0 

12.99 

330 

0.39 

10 M16x22 

7.40 

188 

8.52 

216.5 

7.95 

202 

0.91 

23 

7.62 

193.5 

8.07 

205 

FD/ZAE 128B 

16.54 

420 

13.58 

345 

+0.0023 / 0 

+0.057 / 0 

14.96 

380 

0.39 

10 M20x27 

8.11 

206 

9.63 

244.5 

9.23 

234.5 

0.98 

25 

8.39 

213 

10.67 

271 

FD/ZAE 148B 

17.72 

450 

14.17 

360 

+0.0023 / 0 

+0.057 / 0 

15.75 

400 

0.39 

10 M24x32 

8.86 

225 

10.99 

279 

10.16 

258 

1.06 

27 

9.88 

251 

11.73 

298 

FD/ZAE 168B 

20.08 

510 

16.54 

420 

+0.0025 / 0 

+0.063 / 0 

18.11 

460 

0.59 

15 M24x32 

10.32 

262 

12.64 

321 

11.54 

293 

1.50 

38 

11.22 

285 

13.39 

340 

3) Refer Page 1 - 4 

5 - 180 

BD ≥ 12.21" 

BD ≥ 310 mm 

UA ≥ 6.3" 

UA ≥ 160 mm 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Inch 

Shaft Dimensions in 

mm 

Model U VS UF UH VH UG EH UA VA UJ UD US VD UC VB VG BOLT UY Y 

VC UB 

- 

13.74 4.13 

0.90 0.24 

20 1.89 2.56 1.50 1.18 

0.55 3.47 1.89 +0.001 / 0 0.43 0.43 2.56 0.16 0.79 22.8 6 

FD/ZAE 68B 

- 

25 

349 105 

12.01 4.09 

1.11 0.32 

28.3 8 

- 48 65 38 30 M42x2 14 88 48 +0.025 / 0 11 11 65 4 20 M10x25 1.31 0.32 

30 305 104 

33.3 8 

- 

16.16 5.12 

1.31 0.32 

30 2.28 3.15 1.93 1.54 

0.91 4.33 2.48 +0.0012 / 0 0.67 0.47 3.15 0.18 0.93 33.3 8 

FD/ZAE 88B 

- 

35 

410.5 130 

14.06 5.08 

1.51 0.39 

38.3 10 

- 58 80 49 39 M56x2 23 110 63 +0.030 / 0 17 12 80 4.5 23.5 M12x35 1.71 0.47 

40 357 129 43.3 12 

- 

18.19 6.30 

1.71 0.47 

40 2.80 3.74 2.36 1.54 

0.98 5.12 3.07 +0.0012 / 0 0.67 0.55 3.74 0.20 1.22 43.3 12 

- 

FD/ZAE 108B 

45 

462 160 

15.59 6.14 

1.92 0.55 

48.8 14 

- 71 95 60 39 M64x2 25 130 78 +0.030 / 0 17 14 95 5 31 M16x45 2.12 0.55 

50 396 156 53.8 14 

- 

21.81 6.89 

1.92 0.55 

45 3.43 4.33 2.80 1.93 

1.22 5.91 3.46 +0.0014 / 0 0.87 0.67 4.33 0.20 1.65 48.8 14 

- 

FD/ZAE 128B 

50 

554 175 

18.58 6.85 

2.12 0.55 

53.8 14 

- 87 110 71 49 M80x3 31 150 88 +0.035 / 0 22 17 110 5 42 M16x45 2.54 0.71 

60 472 174 64.4 18 

- 

24.65 7.48 

2.54 0.71 

60 3.74 4.72 3.47 2.05 

1.30 6.30 4.13 +0.0014 / 0 0.87 0.79 4.72 0.24 1.77 64.4 18 

- 

FD/ZAE 148B 

70 

626 190 

21.14 7.44 

2.95 0.79 

74.9 20 

- 95 120 88 52 M95x3 33 160 105 +0.035 / 0 22 20 120 6 45 M16x55 3.15 0.79 

75 537 189 79.9 20 

- 

28.43 9.06 

2.95 0.79 

70 4.13 5.91 4.09 2.24 

1.65 7.68 4.92 +0.0016 / 0 0.98 0.87 5.91 0.24 1.93 74.9 20 

- 

FD/ZAE 168B 

80 

722 230 

24.53 9.02 

3.36 0.87 

85.4 22 

- 105 150 104 57 M110x3 42 195 125 +0.040 / 0 25 22 150 6 49 M20x55 3.76 0.98 

90 623 229 95.4 25 

5 - 181








Oil fitting 



Frame size 38B: 


From frame size 48B: 





F.Z, F.F, F.M68B .. 168B B5-01 (IM B5-01) 

F.A., F.AM68B ... 168B H-01 

F.Z, F.F, F.M68B ... 168B B5-02 (IM B5-02) 

F.A., F.AM68B ... 168B H-03 

F.Z, F.F, F.M68B ... 168B V1-00 (IM V1-00) 

F.A., F.AM68B ... 168B H-05 

5 - 182 

Oil level Ventilation Oil drain - - - - - alternative 

3 

V 

2 

1 

4 

A B 

2 

2 

1 

3 

1 4 

2 

88B-188B 

* 

B 

A 

V 

88B-188B 

F.Z, F.F, F.M68B ... 168B B5-03 (IM B5-03) 

F.A., F.AM68B ... 168B H-02 

48B-108B 

88B-188B 

4 

1 

2 

128B-188B 

F.Z, F.F, F.M68B ... 168B B5-00 (IM B5-00) 

F.A., F.AM68B ... 168B H-04 

V 

F.Z, F.F, F.M68B ... 168B V3-00 (IM V3-00) 

F.A., F.AM68B ... 168B H-06 

V 

B A 

A 

88B-188B B 4 1 2 

* 

3 

1 

2 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Tandem-Parallel Shaft Gear Motors and Tandem-Gear Units 

‚ 





Note: 




Oil fitting 

Frame size 28/38 (smaller gear unit): 




2 

3 





V 

* 

* 

2 3 

V 

Main Gear 

Unit 

* 

Main Gear 

Unit 

V 

5 - 183


Lubrication 

MOTOX-Parallel Shaft Gear Units of sizes 48B...188B are supplied with filler, oil level and drain plug. Before starting operations the 


The size 28 have no venting, oil level and oil drain plug. Because of the low thermal load, no lubricant-change is necessary. 

FD../FZ.. 38B gear units have one oil plug, ventilation of this gear units is not necessary. 

Speed reducers are shipped with their lubricant, ready for operation. In order to fill the housings with adequate amount of lubricant, 

working conditions have to be specified in the order. Only blended, age-resistant and non-foaming EP oils (FZG test DIN 51354 

load stage > 12) are used. 

Do not mix oils of different manufacturers. We recommend the oils listed. This is, of course, no exclusive recommendation and equivalent 

lubricants of other manufacturers can be used. 

During an oil change, only oils of the same type (for example CLP) and with the same viscosity class (for example VG 220) may be 

mixed. Do not mix differing types of oil (e.g. CLP and PGLP) under any circumstances. 

Biologically decomposable, environment-friendly oils based on synthetic or native ester with water hazard class 1 or 2 respectively or 


Maintenance 

of the parallel shaft gear units has to be carried out in accordance with the Operating Instructions manual supplied with the units. 


‚ 

Ambient temperature 

°C 

-10 ... + 40 

-20* ... + 50 

0* ... + 60* 

5 - 184 

Marking 

according to 

DIN 51502 

CLP 

ISO VG 220 

CLP PG 

ISO VG 220 

CLP PG 

ISO VG 460 

CLP 220S 

- 

- 

Degol 

BG 220 

Degol 

GS 220 

Degol 

GS 450 

Energol 

GR-XP 220 

Enersyn 

SG-XP 220 

Enersyn 

SG-XP 460 


Alpha SP 220 


Tribol 1100/220 

Optiflex A220 


Optiflex A460 



Falcon 

CLP220 

Polydea 

PGLP 220 

Polydea 

PGLP 460 

Spartan 

EP220 

Glycolube 

220 

Glycolube 

460 

Renolin 

CLP 220 

Renolin 

PG 220 

Renolin 

PG 460 

Klüberoil 

GEM 1-220 

Syntheso 

D 220 EP 

Syntheso 

D 460 EP 

Mobilgear 

XMP 220 

* Note: 


- 

- 

Omala 

220 

Tivela S 

220 

Tivela S 

460 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




Important: 




B3-67 B8-67 B7-38 B6-38 V5-67 V6-67 

B5-01 B5-03 B5-02 B5-00 V1-00 V3-00 

H-01 H-02 H-03 H-04 H-05 H-06 

FZ.28 0.60 / 0.16 0.45 / 0.119 0.50 / 0.132 0.50 / 0.132 0.65 / 0.172 0.85 / 0.225 

FZ.38B 0.70 / 0.185 0.60 / 0.159 0.70 / 0.185 0.60 / 0.159 1.00 / 0.264 1.1 / 0.29 

FZ.48B 1.6 / 0.42 1.00 / 0.264 1.3 / 0.34 1.3 / 0.34 1.8 / 0.48 2.1 / 0.55 

FZ.68B 2.5 / 0.66 2.3 / 0.61 2.4 / 0.63 2.3 / 0.61 3.3 / 0.87 3.8 / 1 

FZ.88B 4.5 / 1.19 5.0 / 1.32 4.8 / 1.27 4.6 / 1.22 7.0 / 1.85 6.6 / 1.74 

FZ.108B 7.4 / 1.95 9.2 / 2.43 8.4 / 2.22 8.1 / 2.14 11.1 / 2.93 13.1 / 3.46 

FZ.128B 13.8 / 3.65 13.7 / 3.62 15.5 / 4.09 14.8 / 3.91 22.1 / 5.84 22.7 / 6 

FZ.148B 19.5 / 5.15 20.8 / 5.49 22.7 / 6 22.3 / 5.89 34.5 / 9.11 33.5 / 8.85 

FZ.168B 32.8 / 8.67 30.0 / 7.93 37.0 / 9.77 35.8 / 9.46 53.8 / 14.21 53.0 / 14 

FZ.188B 41.4 / 10.94 40.7 / 10.75 44.2 / 11.68 46.5 / 12.28 68.0 / 17.96 66.4 / 17.54 

FD.28 0.60 / 0.159 0.45 / 0.119 0.50 / 0.132 0.50 / 0.132 0.65 / 0.172 0.75 / 0.2 

FD.38B 0.90 / 0.238 0.60 / 0.159 0.70 / 0.185 0.70 / 0.185 0.90 / 0.238 1.1 / 0.29 

FD.48B 2.0 / 0.53 0.90 / 0.238 1.3 / 0.34 1.3 / 0.34 1.8 / 0.48 2.0 / 0.53 

FD.68B 3.3 / 0.87 2.3 / 0.61 2.4 / 0.63 2.3 / 0.61 3.2 / 0.85 3.8 / 1 

FD.88B 6.3 / 1.66 5.0 / 1.32 4.7 / 1.24 4.7 / 1.24 6.8 / 1.8 6.7 / 1.77 

FD.108B 10.6 / 2.8 9.1 / 2.4 8.2 / 2.17 8.2 / 2.17 11.1 / 2.93 13.0 / 3.43 

FD.128B 16.8 / 4.44 13.5 / 3.57 15.2 / 4.02 14.8 / 3.91 21.6 / 5.71 22.5 / 5.94 

FD.148B 24.7 / 6.53 20.3 / 5.36 21.8 / 5.76 22.3 / 5.89 33.6 / 8.88 32.6 / 8.61 

FD.168B 44.0 / 11.62 28.8 / 7.61 36.0 / 9.51 35.8 / 9.46 52.4 / 13.84 51.9 / 13.71 

FD.188B 52.0 / 13.74 38.4 / 10.14 44.5 / 11.76 54.1 / 14.29 66.0 / 17.44 65.2 / 17.22 

5 - 185


Helical Worm Gear Motors and Gear Units 

6 - 1 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


6 - 2









List of Efficiency 6 - 24 






Mounting Position 6 - 112 


6 - 3 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Helical Worm Gear Units 


MOTOX Helical Worm Gear Units are part of the MOTOX modular system which essentially comprises helical, helical bevel, parallel 

shaft and worm gear units or mechanical variable speed drives. With three or single phase AC motors with or without brake, all imaginable 

drive combinations up to electronic variable speed drives are possible. 

MOTOX Helical Worm Gear Units are designed for continuous operation. 


An additional cover is not necessary to assemble the gear parts in the housing. For this reason these gear boxes have a special high 

stiffness. 

Lubricant loss and entry of dust and water are effectively prevented by high quality radial shaft seals. 

The gears of the helical stages are hobbed, case hardened and profile ground or honed. Additionally, gear teeth are profile corrected 

and crowned for optimum performance. 


Helical gears have a hardness of 58-62 R c. 

The worm wheels are made out of centrifugally cast bronze. This manufacturing process gives a higher density to the material. 

All worm shafts are case-hardened and have a low friction coefficient for increased efficiency. 

From size 38 up CAVEX hollow-flank worm and wheel sets are used. 

The concave-profile cylindrical worm with its enveloping wormwheel is substantially different to conventional designs. 

The worm threads have a concave profile instead of an involute or convex one. The illustrations and explanations in the following show 

in a very simplified form the operating advantages this profile provides. 

The concave-profile teeth are subject to only low specific tooth pressure (Hertzian pressure) and the maintenance of an oil film between 

the tooth flanks is particularly assisted, because the concave threads are in contact with convex gear teeth. The profile contact is therefore 

much more favourable than in conventional gear teeth systems in which convex teeth are in contact with convex mating tooth 

flanks. 

Fig. 1 shows an example of a shaft running in journal bearings to indicate that improved profile contact must also have a very favourable 

effect on the concave-profile teeth. 

The concave-profile teeth provide a particularly favourable position of the instantaneous axes which extend mainly at right angles to 

the sliding direction. Thus, the build-up of lubricating pressure, i.e. the generation of an oil film between the tooth flanks is assisted, 

while in conventional gear teeth systems the lubricating pressure build-up is lower since the sliding direction is mainly parallel to the 

instantaneous axes. Fig. 2 shows the corresponding conditions (in this case shown in exaggerated form) obtained with journal bearings. 

It is clearly visible that the best lubricating pressure exists when the shaft rotates - sliding direction precisely at right angles to the 

instantaneous axes - while no lubricating pressure is generated by movement of the shaft in the axial direction - sliding direction parallel 

to the instantaneous axes. 

Owing to the worm thread shape and the position of the pitch circle in concave-profile gear teeth systems a particularly large tooth root 

thickness S 2 on the wormwheel is obtained (Fig. 3) without, however weakening the worm thread. 

6 - 4 

Fig. 1 Fig. 2 Fig. 3 

Conventional worm 


CAVEX gearing 

CAVEX gearing 

CAVEX 


gearing


• The rated efficiencies shown in the data sheet lists for helical-worm gear units can only be achieved if: 

- the gear unit is run-in-correctly 

- the gear unit has achieved its normal operating 

temperature 

- the gear unit has the recommended lubricant 

- the gear unit is working within the indicated torque range. 

All new gear units should be run in for a period of approximately 24-30 hours at full load. From experience we have found that the 

initial efficiency reduction can be as high as those indicated in the following table. This varies considerably with the gear ratio shown 

since a multi-start worm, having a high lead angle is substantially more efficient than a single start worm under the same conditions. 

Starting efficiency is always smaller than efficiency at operating speeds. This fact should be taken into account for machine starting 

against full load, depending on starting characteristics of the motor. A check will be necessary in case of singlephase motors with 

operating capacitors. 

Note: In respect to torque driving back from the output shaft, please take into account the reduced gear tooth efficiency 

η’=2-1/η particularly with large ratio relationships of the worm gear stage. 

(η=efficiency of the driving worm) 

• automatic locking arises only with high ratios, which are not used with the size 28 to 88. 

The output and input shafts are in right angle position. 

The maximum permissible radial and axial loads are to be observed. 



manufactured with a solid shaft or with a hollow shaft (fitted key or shrink disc). 

Integrally mounted C-Face adapters, either in the clamp collar style (K5TC) or the elastic coupling style (KTC), are available for NEMA 

motors. 


Standards 

The important dimensions correspond to the DIN standards, namely: 




Coaxial concentricity and 

runout of shaft ends and 

of flange surface DIN 42955 




Direction of rotation 




is placed. 

The weights [lbs/kg] shown in the dimension sheets are average values and do not include oil. 

For Oil quantities according to the operational mounting positions see chapter “Lubrication, Oil Quantities”. 

Specific weights of oils: 

Mineral oil (CLP) = 0.9 kg/l (2 lbs/l) 

Synthetic oil (PGLP) = 1.05 kg/l (2.3 lbs/l) 

6 - 5 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Units Example: C F 88 - Z 28 - K. (71) 

Type 

Design 

Size 



Input unit 


Gearbox type- C Helical Worm Gearbox 

6 - 6 

Transmission stage (-)without determination 

Type- Shaft 



Mounting 

(-) Foot-mounted design 

F Flange-mounted design (A-type) 


D Torque arm 

G Flange (A-type) on opposite side of output shaft 

Connections 

(-) Feather key 

S Shrink Disk 

T Hollow shaft with splined shaft 

Type of intermediate gearbox (-) Helical Gear Unit 

Transmission stage 

Z 2-stages 

D 3-stages 

Input unit 

K2 Coupling lantern with flexible coupling for connecting an 

IEC motor 

K2TC Coupling lantern with flexible coupling for connecting a 

NEMA motor 



K5 Short coupling lantern with clamp connecting for 


KQ Lantern for servomotor with feather key and zerobacklash 


KQS Lantern for servomotor without feather key and zerobacklash 


A Input with free input shaft 

A5 Input unit with free input shaft (NEMA design) 1) 

P Input unit with free input shaft and piggy back for 


P5 Input unit with free input shaft and piggy back for 


PS Input unit with free input shaft and piggy back with 

protection cover 

Motors 

Type 

Size 




Motor type 

LA, LG 



LAI, LGI 






W Canopy 


IR Resolver 


D Handwheel 

Mounted unit 

L, KFB 

Spring-operated single-disk brake, DC-excited 







M Mircoswitch














T 2 

d 0 

F exist 

= 


T2 ⋅ 2 

------------- 

d 0 




Fxperm 6 - 7 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Permissible overhung loads for helical worm gear units at Service Factor 1.0 



6 - 8 

F xperm2 

F xperm1 

øU 


x V x V/2 0 







- value 




Note: 

The listed radial forces refer to worst case setup (CF). All setups can be calculated with the MOTOX Electric Configurator (CD). 

For high or rotating radial load mixer- and agitator drives have to be used. 

F 

F xperm 

0 

y 

= FRperm ⋅ ------------ Ibf][ 

z + x 

a ⋅ 1000 

= -------------------- Ibf][ 

x 

> =


Typ(e) 

y 

[in.] 

z 

[in.] 

a 

[lb in] 

U 

[in.] 

V 

[in.] 

CF28 5.43 4.65 0.48 3/4 1.57 

CF38 5.75 4.76 1.22 1 1.97 

CF48 6.93 5.75 2.20 1 1/4 2.36 

CF68 8.39 6.81 3.45 1 5/8 3.15 

CF88 10.31 8.35 6.48 2 3.94 


Typ(e) 

y 

[in.] 

z 

[in.] 

a 

[lb in] 

U 

[in.] 

V 

[in.] 

CF68 8.39 6.81 4.97 1 5/8 3.15 

CF88 10.31 8.35 9.53 2 3.94 




∗ 

≤ 16 

[rpm] 



≤ 25 

[rpm] 

≤ 40 

[rpm] 

≤ 63 

[rpm] 

≤ 100 

[rpm] 

≤ 160 

[rpm] 

ccw 608 608 608 608 608 - 

cw 608 608 608 608 608 - 

ccw 1244 1244 961 794 632 572 

cw 1244 1244 1060 882 720 644 

ccw 1864 1864 1586 1283 1026 925 

cw 1864 1864 1683 1382 1127 1008 

ccw 2190 2070 1582 1334 1154 1051 

cw 2190 2189 1717 1449 1274 1141 

ccw 3291 2876 2480 2106 1719 1532 

cw 3291 3033 2615 2223 1890 1665 

∗ 

≤ 16 

[rpm] 


≤ 25 

[rpm] 

≤ 40 

[rpm] 

≤ 63 

[rpm] 

≤ 100 

[rpm] 

≤ 160 

[rpm] 

ccw 3156 3156 3156 3156 3156 3056 

cw 3156 3156 3156 3156 3156 3152 

ccw 4838 4838 4838 4838 4838 4804 

cw 4838 4838 4838 4838 4838 4838 

6 - 9 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




P Motor 

6 - 10 





P Mot 

n Mot 

=Input power 

=Input speed 

η =Efficiency 

n 2 

T 2 

T 1 








Prefered list 

The preferred list offers short delivery through higher availability.





T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.25 (60 Hz) 0.36 16970 0.83 4683 C.88-Z28-LA71C4 

0.40 15323 0.92 4191 

0.45 13746 1.02 3719 

0.51 12205 1.15 3260 

0.58 10876 1.29 2866 

0.65 9937 1.42 2589 

0.74 8813 1.60 2256 

0.83 8033 1.75 2026 

0.92 7360 1.91 1829 

0.88 7466 0.80 1900 C.68-Z28-LA71C4 

0.98 6775 0.88 1706 

1.1 6191 0.97 1541 

1.2 5677 1.05 1397 

1.3 5225 1.15 1271 

1.5 4694 1.28 1124 

1.6 4384 1.37 1038 

1.9 3852 1.56 893 

2.1 3551 1.69 812 

2.3 3622 1.66 738 

2.5 3020 1.99 669 

1.8 3702 0.87 937 C.48-Z28-LA71C4 

1.9 3454 0.94 865 

2.2 3038 1.07 745 

2.5 2798 1.16 677 

2.7 2586 1.26 615 

3.0 2382 1.36 558 

3.3 2196 1.48 508 

3.7 1984 1.64 449 

4.0 1851 1.76 414 

4.7 1638 1.99 357 

5.2 1851 1.77 320.67 C.48-LA71C4 

5.9 1674 1.96 284.7 

2.7 2453 0.81 615 C.38-Z28-LA71C4 

3.0 2258 0.88 558 

3.3 2090 0.95 508 

3.7 1886 1.05 449 

4.0 1762 1.13 414 

4.7 1550 1.28 357 

5.2 1434 1.39 324 

5.2 1753 1.14 320.67 C.38-LA71C4 

5.9 1585 1.26 284.7 

6.7 1417 1.41 249.6 

7.5 1284 1.56 223.36 

8.4 1160 1.72 198.25 

9.6 1027 1.96 173.73 

11.0 912 2.20 152.75 

10.8 1036 0.99 155 C.28-LA71C4 

13.3 841 1.00 126.4 

18.0 690 1.51 93 

22 566 1.50 75.84 

27 487 2.13 62 

33 389 2.16 50.56 

6 - 11 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.25 (60 Hz) 36 372 2.62 46.5 C.28-LA71C4 

44 310 2.57 37.92 

54 256 3.45 31 

66 212 3.38 25.28 

0.33 (60 Hz) 0.58 16031 0.88 2866 C.88-Z28-LA71S4 

0.64 14658 0.96 2589 

0.74 12993 1.08 2256 

0.82 11842 1.19 2026 

0.91 10850 1.30 1829 

1.0 9991 1.41 1659 

1.1 9229 1.52 1510 

1.2 8325 1.69 1335 

1.4 7794 1.80 1232 

1.6 6890 2.04 1061 

1.5 6917 0.87 1124 C.68-Z28-LA71S4 

1.6 6456 0.93 1038 

1.9 5677 1.06 893 

2.1 5234 1.15 812 

2.3 5340 1.12 738 

2.5 4446 1.35 669 

2.7 4109 1.46 609 

3.1 3711 1.62 539 

3.4 3463 1.74 497 

3.9 3055 1.97 428 

4.6 3108 1.94 364 C.68-LA71S4 

5.1 2807 2.15 323.7 

2.7 3808 0.85 615 C.48-Z28-LA71S4 

3.0 3507 0.93 558 

3.3 3241 1.00 508 

3.7 2922 1.11 449 

4.0 2736 1.19 414 

4.7 2418 1.35 357 

5.1 2223 1.47 324 

5.2 2586 1.27 320.67 C.48-LA71S4 

5.8 2338 1.40 284.7 

6.7 2081 1.58 249.6 

7.5 1886 1.74 223.36 

8.4 1700 1.94 198.25 

4.7 2294 0.87 357 C.38-Z28-LA71S4 

5.1 2108 0.94 324 

5.2 2453 0.81 320.67 C.38-LA71S4 

5.8 2214 0.90 284.7 

6.7 1975 1.01 249.6 

7.5 1798 1.11 223.36 

8.4 1612 1.24 198.25 

9.6 1434 1.40 173.73 

10.9 1275 1.57 152.75 

12.1 1160 1.74 138 

13.8 1009 2.01 120.25 

15.4 912 2.22 108 

17.1 823 2.47 97.5 

17.9 965 1.08 93 C.28-LA71S4 

22 788 1.08 75.84 

27 673 1.54 62 

33 549 1.53 50.56 

6 - 12




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.33 (60 Hz) 36 523 1.86 46.5 C.28-LA71S4 

44 426 1.87 37.92 

54 356 2.48 31 

66 291 2.46 25.28 

0.5 (60 Hz) 0.92 16766 0.84 1829 C.88-Z28-LA71M4 

1.0 15438 0.91 1659 

1.1 14260 0.99 1510 

1.3 12869 1.09 1335 

1.4 12045 1.17 1232 

1.6 10655 1.32 1061 

1.7 9849 1.43 964 

1.9 10115 1.39 877 

2.1 8414 1.67 795 

2.3 7776 1.81 723 

2.6 7032 2.00 640 

2.5 6873 0.87 669 C.68-Z28-LA71M4 

2.8 6350 0.95 609 

3.1 5739 1.05 539 

3.4 5358 1.12 497 

3.9 4720 1.28 428 

4.3 4348 1.39 389 

4.6 4605 1.31 364 C.68-LA71M4 

5.2 4162 1.45 323.7 

6.0 3792 1.60 280.8 

6.4 3543 1.71 262.36 

7.3 3160 1.92 230.75 

8.3 2767 2.09 202.09 

4.7 3728 0.88 357 C.48-Z28-LA71M4 

5.2 3436 0.95 324 

5.2 3970 0.82 320.67 C.48-LA71M4 

5.9 3578 0.91 284.7 

6.7 3184 1.03 249.6 

7.5 2891 1.14 223.36 

8.5 2603 1.27 198.25 

9.7 2281 1.45 173.73 

11.0 2034 1.63 152.75 

12.2 1838 1.81 138 

14.0 1624 1.98 120.25 

15.6 1459 2.12 108 

8.5 2417 0.83 198.25 C.38-LA71M4 

9.7 2151 0.93 173.73 

11.0 1920 1.05 152.75 

12.2 1734 1.16 138 

14.0 1534 1.32 120.25 

15.6 1378 1.47 108 

17.2 1244 1.64 97.5 

19.0 1144 1.73 88.4 

21 1041 1.84 80.44 

24 920 2.02 71.12 

26 850 2.12 65.68 

28 984 1.82 60.3 

31 874 2.46 53.53 

27 1012 1.02 62 C.28-LA71M4 

33 825 1.02 50.56 

36 785 1.24 46.5 

6 - 13 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.5 (60 Hz) 44 640 1.24 37.92 C.28-LA71M4 

54 535 1.65 31 

66 436 1.64 25.28 

0.75 (60 Hz) 1.6 16297 0.86 1061 C.88-Z28-LA71ZMP4 

1.7 15066 0.93 964 

1.9 15546 0.90 877 

2.1 12869 1.09 795 

2.3 11895 1.18 723 

2.6 10761 1.31 640 

2.8 10044 1.40 590 

3.3 8839 1.59 508 

3.6 8139 1.73 462 

3.9 8649 1.63 440.7 C.88-LAI80S4 

4.4 7762 1.81 390 

4.8 7154 1.96 354.55 

5.4 6427 2.09 318.5 

3.9 7218 0.83 428 C.68-Z28-LA71ZMP4 

4.3 6651 0.91 389 

4.7 7043 0.86 364 C.68-LAI80S4 

5.3 6353 0.95 323.7 

6.1 5589 1.08 280.8 

6.5 5222 1.16 262.36 

7.4 4656 1.30 230.75 

8.5 4078 1.42 202.09 

9.6 3656 1.52 178.75 

10.6 3314 1.62 162 

12.0 2925 1.76 143 

13.3 2639 1.88 129 

14.6 2393 2.00 117 

16.0 2181 2.13 106.6 

17.5 1994 2.27 97.5 

8.6 3836 0.86 198.25 C.48-LAI80S4 

9.8 3362 0.98 173.73 

11.2 2998 1.11 152.75 

12.4 2708 1.23 138 

14.2 2393 1.34 120.25 

15.8 2149 1.44 108 

17.5 1941 1.55 97.5 

19.3 1759 1.65 88.4 

21 1601 1.76 80.44 

24 1415 1.91 71.12 

26 1307 2.01 65.68 

30 1125 2.24 56.55 

33 1023 2.39 51.41 

36 1155 2.25 46.93 

41 1045 2.71 42 

46 927 2.55 37.28 

52 813 2.91 32.67 

12.4 2556 0.79 138 C.38-LAI80S4 

14.2 2260 0.90 120.25 

15.8 2030 1.00 108 

17.5 1833 1.11 97.5 

19.3 1686 1.17 88.4 

21 1534 1.25 80.44 

24 1356 1.37 71.12 

6 - 14




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

0.75 (60 Hz) 26 1253 1.44 65.68 C.38-LAI80S4 

28 1450 1.23 60.3 

32 1287 1.67 53.53 

36 1142 1.79 46.93 

41 1022 1.90 42 

46 917 2.23 37.28 

52 804 2.11 32.67 

60 707 2.59 28.72 

66 638 2.88 25.95 

36 1177 0.83 46.5 C.28-LA71ZMP4 

44 960 0.83 37.92 

54 802 1.10 31 

66 654 1.09 25.28 

1 (60 Hz) 2.3 16518 0.85 723 C.88-Z28-LA71ZMD4 

2.6 14933 0.94 640 

2.8 13941 1.01 590 

3.2 12276 1.15 508 

3.5 11301 1.24 462 

3.9 11532 1.22 440.7 C.88-LA80M4 

4.4 10349 1.36 390 

4.8 9539 1.47 354.55 

5.4 8569 1.57 318.5 

6.3 7446 1.70 273 

6.9 6737 1.79 247 

7.5 6218 1.87 228 

8.6 5407 2.06 198.25 

6.1 7452 0.81 280.8 C.68-LA80M4 

6.5 6962 0.87 262.36 

7.4 6208 0.98 230.75 

8.5 5437 1.06 202.09 

9.6 4875 1.14 178.75 

10.6 4418 1.21 162 

12.0 3900 1.32 143 

13.3 3518 1.41 129 

14.6 3191 1.50 117 

16.0 2907 1.60 106.6 

17.5 2659 1.70 97.5 

19.0 2919 1.05 90 

20 2727 1.72 84.09 

23 2399 2.02 73.96 

11.2 3997 0.83 152.75 C.48-LA80M4 

12.4 3611 0.92 138 

14.2 3191 1.01 120.25 

15.8 2866 1.08 108 

17.5 2587 1.16 97.5 

19.3 2346 1.24 88.4 

21 2135 1.32 80.44 

24 1887 1.43 71.12 

26 1743 1.51 65.68 

30 1501 1.68 56.55 

33 1364 1.79 51.41 

36 1539 1.68 46.93 

41 1393 2.03 42 

46 1237 1.91 37.28 

52 1084 2.18 32.67 

6 - 15 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

1 (60 Hz) 60 953 2.68 28.72 C.48-LA80M4 

66 861 2.85 25.95 

76 750 3.18 22.61 

19.3 2248 0.88 88.4 C.38-LA80M4 

21 2046 0.94 80.44 

24 1809 1.03 71.12 

26 1670 1.08 65.68 

28 1934 0.92 60.3 

32 1716 1.25 53.53 

36 1522 1.34 46.93 

41 1362 1.43 42 

46 1223 1.67 37.28 

52 1072 1.58 32.67 

60 942 1.94 28.72 

66 851 2.16 25.95 

76 742 2.46 22.61 

84 666 2.60 20.31 

93 601 3.03 18.33 

103 545 3.18 16.62 

113 496 3.33 15.13 

128 439 3.33 13.37 

138 405 3.75 12.35 

161 349 4.39 10.63 

53 1099 0.80 31 C.28-LA71ZMD4 

65 897 0.80 25.28 

1.5 (60 Hz) 3.8 16492 0.85 462 C.88-Z28-LA90SB4E 

4.5 15126 0.93 390 C.88-LA90SB4E 

4.9 13942 1.00 354.55 

5.5 12524 1.07 318.5 

6.4 10882 1.16 273 

7.1 9846 1.23 247 

7.7 9089 1.28 228 

8.9 7903 1.41 198.25 

9.8 7175 1.50 180 

10.7 6552 1.60 164.36 

11.6 6011 1.69 150.8 

12.6 5538 1.78 138.94 

13.9 5030 1.89 126.18 

15.3 4582 2.01 114.95 

10.8 6458 0.83 162 C.68-LA90SB4E 

12.3 5700 0.90 143 

13.6 5142 0.96 129 

15.0 4664 1.03 117 

16.5 4249 1.10 106.6 

18.0 3887 1.16 97.5 

19.5 4266 0.72 90 

21 3986 1.18 84.09 

24 3506 1.38 73.96 

27 3070 1.84 64.77 

31 2716 2.01 57.29 

34 2461 2.15 51.92 

38 2172 2.35 45.83 

42 1982 2.49 41.35 

46 1842 2.10 38 

47 1798 2.66 37.5 

6 - 16




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

1.5 (60 Hz) 52 1611 2.89 33.61 C.68-LA90SB4E 

58 1477 2.61 30.46 

65 1289 3.51 26.89 

72 1176 2.96 24.26 

18.0 3782 0.79 97.5 C.48-LA90SB4E 

19.9 3429 0.85 88.4 

22 3120 0.90 80.44 

25 2758 0.98 71.12 

27 2547 1.03 65.68 

31 2193 1.15 56.55 

34 1994 1.22 51.41 

37 2250 1.15 46.93 

42 2036 1.39 42 

47 1807 1.31 37.28 

54 1584 1.49 32.67 

61 1392 1.84 28.72 

68 1258 1.95 25.95 

78 1096 2.18 22.61 

86 985 2.52 20.31 

96 889 2.99 18.33 

106 806 3.19 16.62 

116 734 3.21 15.13 

131 648 3.22 13.37 

142 599 3.58 12.35 

37 2225 0.92 46.93 C.38-LA90SB4E 

42 1991 0.98 42 

47 1787 1.14 37.28 

54 1566 1.08 32.67 

61 1377 1.33 28.72 

68 1244 1.48 25.95 

78 1084 1.68 22.61 

86 974 1.78 20.31 

96 879 2.07 18.33 

106 797 2.18 16.62 

116 725 2.28 15.13 

131 641 2.28 13.37 

142 592 2.57 12.35 

165 510 3.00 10.63 

181 464 3.24 9.67 

2 (60 Hz) 6.5 14346 0.88 273 C.88-LA90ZLB4E 

7.2 12980 0.93 247 

7.8 11981 0.97 228 

9.0 10418 1.07 198.25 

9.9 9459 1.14 180 

10.8 8637 1.21 164.36 

11.8 7925 1.28 150.8 

12.8 7301 1.35 138.94 

14.1 6631 1.44 126.18 

15.4 6041 1.53 114.95 

16.4 6703 1.79 108.5 

18.1 6065 1.95 98.17 

19.6 5599 1.99 90.62 

23 4868 2.26 78.79 

25 4420 2.42 71.54 

16.7 5602 0.83 106.6 C.68-LA90ZLB4E 

6 - 17 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

2 (60 Hz) 18.2 5124 0.88 97.5 C.68-LA90ZLB4E 

19.7 5624 0.55 90 

21 5255 0.89 84.09 

24 4622 1.05 73.96 

27 4048 1.40 64.77 

31 3580 1.52 57.29 

34 3245 1.63 51.92 

39 2864 1.79 45.83 

43 2613 1.89 41.35 

47 2429 1.59 38 

47 2370 2.02 37.5 

52 2160 2.15 34.17 

53 2148 1.79 33.61 

57 1975 2.29 31.25 

58 1947 1.79 30.46 

64 1766 2.47 27.94 

66 1719 2.09 26.89 

69 1622 2.62 25.66 

73 1551 2.29 24.26 

77 1462 2.81 23.13 

81 1406 2.69 22 

89 1281 2.98 20.04 

89 1257 3.12 19.89 

97 1172 3.19 18.33 

108 1048 3.39 16.39 

118 962 3.69 15.05 

31 2891 0.87 56.55 C.48-LA90ZLB4E 

35 2629 0.93 51.41 

38 2966 0.87 46.93 

42 2684 1.05 42 

48 2383 0.99 37.28 

54 2088 1.13 32.67 

62 1836 1.39 28.72 

68 1659 1.48 25.95 

79 1445 1.65 22.61 

87 1298 1.92 20.31 

97 1172 2.27 18.33 

107 1062 2.42 16.62 

117 967 2.43 15.13 

133 855 2.44 13.37 

144 789 2.71 12.35 

167 679 2.71 10.63 

184 618 2.71 9.67 

48 2356 0.87 37.28 C.38-LA90ZLB4E 

62 1815 1.01 28.72 

68 1640 1.12 25.95 

79 1429 1.28 22.61 

87 1284 1.35 20.31 

97 1159 1.57 18.33 

107 1050 1.65 16.62 

117 956 1.73 15.13 

133 845 1.73 13.37 

144 781 1.95 12.35 

167 672 2.28 10.63 

184 611 2.46 9.67 

6 - 18




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

3 (60 Hz) 11.6 12057 0.84 150.8 C.88-LA100ZLP4E 

12.6 11108 0.89 138.94 

13.9 10088 0.94 126.18 

15.2 9190 1.00 114.95 

16.1 10199 1.17 108.5 

17.8 9228 1.28 98.17 

19.3 8518 1.31 90.62 

22 7406 1.49 78.79 

24 6725 1.59 71.54 

27 6140 1.67 65.32 

29 5633 1.78 59.93 

32 5191 1.87 55.22 

35 4714 2.00 50.15 

38 4294 2.12 45.68 

42 3934 2.25 41.85 

47 3510 2.43 37.34 

52 3365 2.15 33.85 

53 3133 2.62 33.33 

57 3071 2.35 30.9 

62 2819 2.56 28.36 

62 2660 2.94 28.3 

67 2597 2.78 26.13 

74 2359 2.86 23.73 

27 6158 0.92 64.77 C.68-LA100ZLP4E 

31 5447 1.00 57.29 

34 4936 1.07 51.92 

38 4357 1.17 45.83 

42 3976 1.24 41.35 

46 3695 1.05 38 

47 3606 1.32 37.5 

51 3286 1.42 34.17 

52 3268 1.18 33.61 

56 3005 1.50 31.25 

57 2962 1.18 30.46 

63 2687 1.62 27.94 

65 2615 1.37 26.89 

68 2467 1.72 25.66 

72 2359 1.50 24.26 

76 2224 1.85 23.13 

80 2139 1.77 22 

87 1949 1.96 20.04 

88 1913 2.05 19.89 

95 1782 2.09 18.33 

107 1594 2.23 16.39 

116 1463 2.42 15.05 

129 1320 2.45 13.57 

150 1135 2.46 11.67 

95 1782 1.49 18.33 C.48-LA100ZLP4E 

105 1616 1.59 16.62 

116 1471 1.60 15.13 

131 1300 1.61 13.37 

142 1201 1.78 12.35 

165 1034 1.78 10.63 

181 940 1.78 9.67 

95 1763 1.03 18.33 C.38-LA100ZLP4E 

6 - 19 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

3 (60 Hz) 105 1598 1.09 16.62 C.38-LA100ZLP4E 

116 1455 1.14 15.13 

131 1286 1.13 13.37 

142 1188 1.28 12.35 

165 1022 1.50 10.63 

181 930 1.62 9.67 

4 (60 Hz) 16.1 13598 0.88 108.5 C.88-LA100ZLD4E 

17.8 12304 0.96 98.17 

19.3 11357 0.98 90.62 

22 9875 1.11 78.79 

24 8966 1.19 71.54 

27 8187 1.25 65.32 

29 7511 1.33 59.93 

32 6921 1.40 55.22 

35 6285 1.50 50.15 

38 5725 1.59 45.68 

42 5245 1.69 41.85 

47 4680 1.82 37.34 

52 4486 1.61 33.85 

53 4177 1.97 33.33 

57 4095 1.76 30.9 

62 3759 1.92 28.36 

62 3547 2.20 28.3 

67 3463 2.08 26.13 

74 3145 2.15 23.73 

74 2953 2.47 23.56 

81 2864 2.51 21.61 

88 2624 2.70 19.8 

99 2342 3.00 17.67 

111 2090 3.29 15.77 

131 1775 3.62 13.39 

157 1478 3.93 11.15 

38 5810 0.88 45.83 C.68-LA100ZLD4E 

42 5302 0.93 41.35 

47 4862 0.98 37.5 

51 4381 1.06 34.17 

52 4309 0.89 33.61 

56 4052 1.12 31.25 

57 3905 0.89 30.46 

63 3622 1.20 27.94 

65 3448 1.04 26.89 

68 3327 1.28 25.66 

72 3110 1.14 24.26 

76 2999 1.37 23.13 

80 2821 1.34 22 

87 2598 1.47 20.04 

88 2579 1.52 19.89 

95 2350 1.59 18.33 

107 2125 1.67 16.39 

116 1951 1.82 15.05 

129 1759 1.84 13.57 

150 1513 1.84 11.67 

95 2377 1.12 18.33 C.48-LA100ZLD4E 

105 2155 1.19 16.62 

116 1962 1.20 15.13 

6 - 20




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

4 (60 Hz) 131 1733 1.20 13.37 C.48-LA100ZLD4E 

142 1601 1.34 12.35 

165 1378 1.34 10.63 

181 1254 1.33 9.67 

116 1940 0.85 15.13 C.38-LA100ZLD4E 

131 1714 0.85 13.37 

142 1583 0.96 12.35 

165 1363 1.12 10.63 

181 1240 1.21 9.67 

5.5 (60 Hz) 22 13539 0.81 78.79 C.88-LA112ZMP4E 

25 12293 0.87 71.54 

27 11224 0.92 65.32 

29 10298 0.97 59.93 

32 9489 1.02 55.22 

35 8618 1.09 50.15 

38 7850 1.16 45.68 

42 7191 1.23 41.85 

47 6416 1.33 37.34 

53 6056 1.19 33.33 

52 5817 1.41 33.85 

57 5615 1.29 30.9 

62 5142 1.40 28.3 

62 4873 1.60 28.36 

67 4748 1.52 26.13 

74 4312 1.57 23.73 

74 4048 1.80 23.56 

81 3927 1.83 21.61 

89 3598 1.97 19.8 

99 3211 2.19 17.67 

111 2866 2.40 15.77 

131 2433 2.64 13.39 

157 2026 2.86 11.15 

56 5493 0.82 31.25 C.68-LA112ZMP4E 

63 4967 0.88 27.94 

68 4561 0.93 25.66 

72 4313 0.82 24.26 

76 4066 1.01 23.13 

80 3911 0.97 22 

88 3562 1.07 20.04 

88 3496 1.12 19.89 

96 3258 1.15 18.33 

107 2914 1.22 16.39 

117 2675 1.33 15.05 

129 2412 1.34 13.57 

150 2074 1.34 11.67 

96 3258 0.81 18.33 C.48-LA112ZMP4E 

106 2954 0.87 16.62 

116 2690 0.87 15.13 

131 2377 0.88 13.37 

142 2195 0.98 12.35 

165 1890 0.97 10.63 

181 1719 0.97 9.67 

7.5 (60 Hz) 35 11718 0.80 50.15 C.88-LA132SP4E 

39 10673 0.85 45.68 

42 9779 0.90 41.85 

6 - 21 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




T2 SF 

Ratio 

Gear Motor 

[hp] 

[rpm] 

[lb in] 

[-] 

[-] 

7.5 (60 Hz) 47 8725 0.98 37.34 C.88-LA132SP4E 

52 8364 0.86 33.85 

53 7788 1.06 33.33 

57 7635 0.95 30.9 

62 6993 1.03 28.3 

62 6627 1.18 28.36 

67 6456 1.12 26.13 

74 5863 1.15 23.73 

75 5505 1.32 23.56 

81 5340 1.35 21.61 

89 4892 1.45 19.8 

100 4366 1.61 17.67 

112 3897 1.76 15.77 

131 3308 1.94 13.39 

158 2755 2.11 11.15 

88 4754 0.83 19.89 C.68-LA132SP4E 

117 3638 1.03 15.05 

130 3280 1.08 13.57 

151 2821 1.26 11.67 

10 (60 Hz) 62 8817 0.89 28.3 C.88-LA132ZMP4E 

67 8608 0.84 26.13 

75 7762 0.87 23.56 

74 7393 0.98 23.73 

81 7119 1.01 21.61 

89 6523 1.09 19.8 

100 5821 1.21 17.67 

112 5195 1.32 15.77 

131 4411 1.46 13.39 

158 3673 1.58 11.15 

130 4373 0.74 13.57 C.68-LA132ZMP4E 

151 3761 0.74 11.67 

12.3 (60 Hz) 74 9106 0.80 23.56 C.88-LA132ZMP4 

81 8832 0.82 21.61 

89 8092 0.88 19.8 

99 7222 0.97 17.67 

111 6445 1.07 15.77 

130 5473 1.18 13.39 

157 4557 1.27 11.15 

15 (60 Hz) 132 6598 0.97 13.39 C.88-LA160MP4E 

158 5494 1.06 11.15 

6 - 22


6 - 23 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Frame-size NEMA- 

K5TC 

6 - 24 

IEC-K4 

on request 

NEMA- 

KTC 

IEC-K2 

on request 

NEMA-A5 IEC-A 

on request 

NEMA-P5 IEC-P 

on request 

63 • • 

56C 71 • • • • • • • 

80 • • • • • • • 

140TC 90 • • • • • • • • • 

180TC 100 • • • • • • • • • 

112 • • • • • • • 

210TC 132 • • • • • • • • • 

250TC 160 • • • • • • • • • 






56C 71 26.5 3 5/8 16 1.575 40 54 240 

80 44.2 5 3/4 19 1.575 40 54 240 

140TC 90 88.5 10 7/8 24 1.968 50 139 620 

180TC 100 177 20 1 1/8 28 2.362 60 189 840 

112 230 26 1 1/4 28 2.362 60 225 1000 

210TC 132 540 61 1 3/8 38 3.150 80 382 1700 

250TC 160 867 98 1 5/8 42 4.331 110 405 1800 


F 

F RAperm V1/2 

0 

F RAperm V1/2 

∅FU1 

0 V1/2 V1 x 

Motor

Worm Helical Gear Units 

List of Efficiency C.28 

Legend/explanations see page 6 - 28 


Ratio 

[-] 

n 2 

[rpm] 


n Mot= 2500 rpm n Mot= 1750 rpm n Mot= 1450 rpm n Mot= 1150 rpm Size for motor 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 71 

372.00 6.7 1052 0.20 56% 4.7 1052 0.13 56% 3.9 1044 0.12 56% 3.1 1035 0.09 55% • 

303.36 8.2 964 0.22 56% 5.8 964 0.16 56% 4.8 955 0.13 56% 3.8 955 0.10 55% • 

248.00 10.1 1044 0.25 66% 7.1 1044 0.17 66% 5.8 1044 0.14 66% 4.6 1044 0.12 66% • 

202.24 12.4 884 0.26 66% 8.7 884 0.18 66% 7.2 884 0.14 66% 5.7 875 0.12 66% • 

155.00 16.1 1026 0.34 74% 11.3 1026 0.25 74% 9.4 1026 0.20 74% 7.4 1026 0.16 74% • 

126.40 19.8 831 0.34 74% 13.8 840 0.24 74% 11.5 840 0.20 74% 9.1 831 0.16 74% • 

93.00 27.0 1044 0.53 83% 18.8 1044 0.37 83% 15.6 1044 0.30 83% 12.4 1044 0.25 83% • 

75.84 33.0 849 0.53 83% 23.0 849 0.37 83% 19.1 849 0.30 83% 15.2 840 0.24 83% • 

62.00 40.0 1035 0.76 87% 28.0 1035 0.53 87% 23.0 1035 0.42 87% 18.5 1035 0.34 87% • 

50.56 49.0 831 0.75 87% 35.0 840 0.53 87% 29.0 840 0.44 87% 23.0 831 0.34 87% • 

46.50 54.0 973 0.93 90% 38.0 973 0.65 90% 31.0 973 0.53 90% 25.0 973 0.42 90% • 

37.92 66.0 796 0.92 90% 46.0 796 0.64 90% 38.0 796 0.53 90% 30.0 796 0.41 90% • 

31.00 81.0 875 1.23 92% 56.0 884 0.85 92% 47.0 875 0.71 92% 37.0 875 0.56 92% • 

25.28 99.0 716 1.21 92% 69.0 716 0.85 92% 57.0 716 0.71 92% 45.0 716 0.56 92% • 

Ratio 

[-] 

n 2 

[rpm] 

n Mot= 950 rpm n Mot= 850 rpm n Mot= 700 rpm Size for motor 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

372.00 2.6 1026 0.08 55% 2.3 1026 0.06 54% 1.9 1008




(450) 655-7447 


www.dstech.ca 



List of Efficiency C.38-D/Z28 



6 - 26 

Ratio 

[-] 

n 2 

[rpm] 

n Mot= 1750 rpm n Mot= 1450 rpm Size for motor 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

23503 0.07 1964





Ratio 

[-] 

n 2 

[rpm] 


n Mot = 2500 rpm n Mot = 1750 rpm n Mot = 1450 rpm Size for motor and input unit 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

320.67 5.5 1990 0.28 62% 4.5 1990 0.24 60% 3.6 1981 0.20 58% • • • 

284.70 6.1 1999 0.30 63% 5.1 1990 0.26 62% 4 1981 0.21 59% • • • 

249.60 7 1999 0.34 64% 5.8 1999 0.29 63% 4.6 1990 0.24 61% • • • • 

223.36 7.8 2008 0.37 65% 6.5 1999 0.32 64% 5.1 1990 0.26 62% • • • • 

198.25 8.8 2008 0.42 66% 7.3 1999 0.36 65% 5.8 1990 0.29 63% • • • • 

173.73 10.1 2017 0.48 67% 8.3 2008 0.40 66% 6.6 1999 0.32 64% • • • • 

152.75 11.5 2017 0.54 68% 9.5 2008 0.45 67% 7.5 1999 0.36 65% • • • • 

138.00 12.7 2026 0.60 68% 10.5 2017 0.49 67% 8.3 2008 0.40 66% • • • • 

120.25 14.6 2035 0.68 68% 12.1 2026 0.57 68% 9.6 2017 0.45 67% • • • • 

108.00 16.2 1999 0.75 69% 13.4 2026 0.63 68% 10.6 2017 0.50 67% • • • • 

P Mot 

[hp] 

η 

[%] 63 71 80 90 100 112 132 160 

97.50 17.9 1937 0.80 69% 14.9 2035 0.71 68% 11.8 2026 0.56 68% • • • • • 

88.40 19.8 1866 0.85 69% 16.4 1981 0.75 69% 13 2026 0.61 68% • • • • • 

80.44 22 1796 0.91 69% 18 1920 0.80 69% 14.3 2035 0.67 68% • • • • • 

71.12 25 1725 0.99 69% 20 1858 0.85 69% 16.2 1990 0.75 69% • • • • • 

65.68 27 1689 1.04 69% 22 1804 0.91 69% 17.5 1946 0.79 69% • • • • • 

60.30 29 1804 0.95 87% 24 1787 0.79 87% 19.1 1760 0.63 85% • • • 

53.53 33 2167 1.28 88% 27 2150 1.05 87% 21 2114 0.81 86% • • • 

46.93 37 2052 1.36 88% 31 2043 1.13 88% 25 2017 0.92 87% • • • • 

42.00 42 1964 1.47 89% 35 1946 1.23 88% 27 1928 0.95 87% • • • • 

37.28 47 2052 1.71 89% 39 2043 1.43 89% 31 2026 1.13 88% • • • • 

32.67 54 1698 1.63 89% 44 1698 1.32 89% 35 1681 1.05 88% • • • • 

28.72 61 1840 1.99 89% 50 1831 1.63 89% 40 1822 1.30 89% • • • • 

25.95 67 1849 2.19 89% 56 1840 1.83 89% 44 1831 1.44 89% • • • • 

22.61 77 1822 2.49 89% 64 1822 2.07 89% 51 1813 1.64 89% • • • • 

20.31 86 1734 2.65 89% 71 1734 2.18 89% 57 1734 1.75 89% • • • • 

18.33 95 1760 2.96 89% 79 1822 2.56 89% 63 1822 2.03 89% • • • • • 

16.62 105 1689 3.13 89% 87 1734 2.68 89% 69 1734 2.13 89% • • • • • 

15.13 116 1619 3.33 89% 96 1654 2.81 89% 76 1654 2.22 89% • • • • • 

13.37 131 1459 3.39 89% 108 1459 2.80 89% 86 1459 2.22 89% • • • • • 

12.35 142 1495 3.76 89% 117 1521 3.16 89% 93 1521 2.52 89% • • • • • 

10.63 165 1371 4.02 89% 136 1530 3.69 89% 108 1619 3.09 89% • • • • • 

9.67 181 1247 4.02 89% 150 1504 4.02 89% 119 1557 3.29 89% • • • • • 

6 - 27 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 






Ratio 

[-] 

6 - 28 

n 2 

[rpm] 


T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 63 

56C 

71 80 

320.67 3 1981 0.16 56% 2.7 1981 0.14 56% 2.2 1973 0.13 54% • • • 

284.70 3.3 1981 0.17 58% 3 1981 0.16 57% 2.5 1981 0.14 55% • • • 

249.60 3.8 1981 0.20 59% 3.4 1981 0.18 58% 2.8 1981 0.16 56% • • • • 

223.36 4.3 1990 0.22 60% 3.8 1981 0.20 59% 3.1 1981 0.17 57% • • • • 

198.25 4.8 1990 0.25 61% 4.3 1990 0.22 60% 3.5 1981 0.18 58% • • • • 

173.73 5.5 1990 0.28 62% 4.9 1990 0.25 61% 4 1981 0.21 59% • • • • 

152.75 6.2 1999 0.30 63% 5.6 1990 0.28 62% 4.6 1990 0.24 61% • • • • 

138.00 6.9 1999 0.33 64% 6.2 1999 0.30 63% 5.1 1990 0.26 62% • • • • 

120.25 7.9 2008 0.38 65% 7.1 1999 0.34 65% 5.8 1999 0.29 63% • • • • 

108.00 8.8 2008 0.42 66% 7.9 2008 0.38 65% 6.5 1999 0.32 64% • • • • 

140TC 180TC 

90 100 112 

97.50 9.7 2017 0.46 67% 8.7 2008 0.41 66% 7.2 1999 0.34 65% • • • • • 

88.40 10.7 2017 0.50 67% 9.6 2017 0.45 67% 7.9 2008 0.38 65% • • • • • 

80.44 11.8 2026 0.56 68% 10.6 2017 0.50 67% 8.7 2008 0.41 66% • • • • • 

71.12 13.4 2026 0.63 68% 12 2026 0.56 68% 9.8 2017 0.46 67% • • • • • 

65.68 14.5 2035 0.68 68% 12.9 2026 0.61 68% 10.7 2017 0.50 67% • • • • • 

60.30 15.8 1734 0.52 84% 14.1 1725 0.45 84% 11.6 1698 0.37 82% • • • 

53.53 17.7 2088 0.69 85% 15.9 2070 0.61 84% 13.1 2043 0.50 83% • • • 

46.93 20 1990 0.73 86% 18.1 1973 0.67 85% 14.9 1946 0.54 84% • • • • 

42.00 23 1911 0.80 86% 20 1893 0.69 86% 16.7 1866 0.58 85% • • • • 

37.28 25 2008 0.91 87% 23 1990 0.84 86% 18.8 1964 0.68 85% • • • • 

32.67 29 1672 0.87 87% 26 1663 0.79 87% 21 1636 0.63 86% • • • • 

28.72 33 1813 1.07 88% 30 1804 0.97 88% 24 1787 0.77 87% • • • • 

25.95 37 1822 1.20 88% 33 1813 1.08 88% 27 1804 0.88 87% • • • • 

22.61 42 1813 1.35 89% 38 1804 1.23 88% 31 1787 1.00 88% • • • • 

20.31 47 1725 1.44 89% 42 1725 1.28 89% 34 1707 1.04 88% • • • • 

18.33 52 1822 1.68 89% 46 1813 1.48 89% 38 1804 1.23 88% • • • • • 

16.62 57 1734 1.75 89% 51 1725 1.56 89% 42 1725 1.28 89% • • • • • 

15.13 63 1645 1.84 89% 56 1645 1.63 89% 46 1645 1.35 89% • • • • • 

13.37 71 1459 1.83 89% 64 1459 1.66 89% 52 1451 1.34 89% • • • • • 

12.35 77 1521 2.07 89% 69 1521 1.86 89% 57 1521 1.54 89% • • • • • 

10.63 89 1619 2.54 89% 80 1619 2.29 89% 66 1610 1.89 89% • • • • • 

9.67 98 1557 2.70 89% 88 1557 2.43 89% 72 1557 1.99 89% • • • • • 

210TC 

132 

250TC 

160





Ratio 

[-] 

n 2 

[rpm] 



T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 63 

56C 

71 80 

320.67 1.6 1973 0.09 52% 0.78 1973




(450) 655-7447 


www.dstech.ca 






6 - 30 

Ratio 

[-] 

n 2 

[rpm] 

n Mot = 1750 rpm n Mot = 1450 rpm Size for motor 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

23503 0.07 3220





Ratio 

[-] 

n 2 

[rpm] 



T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 63 

56C 

71 80 

320.67 5.5 3273 0.42 66% 4.5 3264 0.36 64% 3.6 3256 0.30 61% • • • 

284.70 6.1 3273 0.46 67% 5.1 3264 0.40 65% 4 3256 0.33 63% • • • 

249.60 7 3282 0.53 68% 5.8 3273 0.45 66% 4.6 3264 0.37 64% • • • • 

223.36 7.8 3291 0.58 69% 6.5 3282 0.50 67% 5.1 3264 0.40 65% • • • • 

198.25 8.8 3300 0.65 70% 7.3 3291 0.56 68% 5.8 3273 0.45 66% • • • • 

173.73 10.1 3309 0.75 70% 8.3 3300 0.63 69% 6.6 3282 0.50 67% • • • • 

152.75 11.5 3318 0.85 71% 9.5 3309 0.71 70% 7.5 3291 0.57 68% • • • • 

138.00 12.7 3335 0.93 71% 10.5 3318 0.77 71% 8.3 3300 0.63 69% • • • • 

120.25 14.6 3211 1.04 72% 12.1 3326 0.89 71% 9.6 3309 0.72 70% • • • • 

108.00 16.2 3096 1.11 72% 13.4 3335 0.99 71% 10.6 3318 0.79 71% • • • • 

140TC 180TC 

90 100 112 

97.50 17.9 2999 1.17 72% 14.9 3344 1.09 72% 11.8 3326 0.87 71% • • • • • 

88.40 19.8 2910 1.27 72% 16.4 3362 1.21 72% 13 3318 0.96 71% • • • • • 

80.44 22 2813 1.36 72% 18 3371 1.34 72% 14.3 3229 1.01 72% • • • • • 

71.12 25 2698 1.48 72% 20 3379 1.48 72% 16.2 3114 1.11 72% • • • • • 

65.68 27 2627 1.56 72% 22 3397 1.64 72% 17.5 3034 1.16 72% • • • • • 

56.55 31 2521 1.71 72% 26 3415 1.95 72% 20 2910 1.28 72% • • • • • 

51.41 34 2442 1.83 72% 28 3424 2.11 72% 22 2822 1.36 72% • • • • • 

46.93 37 2592 1.70 89% 31 2583 1.43 89% 25 2557 1.15 88% • • • • 

42.00 42 2831 2.10 90% 35 2813 1.75 89% 27 2795 1.35 88% • • • • 

37.28 47 2362 1.97 90% 39 2362 1.63 89% 31 2344 1.30 89% • • • • 

32.67 54 2362 2.25 90% 44 2353 1.83 90% 35 2344 1.46 89% • • • • 

28.72 61 2557 2.74 90% 50 2557 2.25 90% 40 2548 1.80 89% • • • • 

25.95 67 2450 2.90 90% 56 2450 2.42 90% 44 2450 1.90 90% • • • • 

22.61 77 2388 3.24 90% 64 2388 2.70 90% 51 2388 2.15 90% • • • • 

20.31 86 2486 3.78 90% 71 2486 3.12 90% 57 2486 2.50 90% • • • • 

18.33 95 2654 4.45 90% 79 2654 3.69 90% 63 2654 2.94 90% • • • • • 

16.62 105 2574 4.77 90% 87 2592 3.98 90% 69 2592 3.15 90% • • • • • 

15.13 116 2353 4.82 90% 96 2353 3.99 90% 76 2353 3.16 90% • • • • • 

13.37 131 2088 4.82 90% 108 2088 3.96 90% 86 2088 3.16 90% • • • • • 

12.35 142 2141 5.36 90% 117 2203 4.54 90% 93 2203 3.60 90% • • • • • 

10.63 165 1840 5.36 90% 136 2229 5.36 90% 108 2247 4.28 90% • • • • • 

9.67 181 1672 5.36 90% 150 2026 5.36 90% 119 2150 4.51 90% • • • • • 

210TC 

132 

250TC 

160 

6 - 31 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 






Ratio 

[-] 

6 - 32 

n 2 

[rpm] 


T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 63 

56C 

71 80 

320.67 3 3247 0.25 59% 2.7 3247 0.24 58% 2.2 3238 0.20 57% • • • 

284.70 3.3 3247 0.28 61% 3 3247 0.25 59% 2.5 3238 0.22 58% • • • 

249.60 3.8 3256 0.32 62% 3.4 3256 0.29 61% 2.8 3247 0.24 59% • • • • 

223.36 4.3 3256 0.34 63% 3.8 3256 0.32 62% 3.1 3247 0.26 60% • • • • 

198.25 4.8 3264 0.38 64% 4.3 3256 0.34 63% 3.5 3256 0.29 61% • • • • 

173.73 5.5 3273 0.42 66% 4.9 3264 0.38 64% 4 3256 0.33 62% • • • • 

152.75 6.2 3273 0.48 67% 5.6 3273 0.44 66% 4.6 3264 0.37 64% • • • • 

138.00 6.9 3282 0.53 68% 6.2 3273 0.48 67% 5.1 3264 0.40 65% • • • • 

120.25 7.9 3291 0.60 69% 7.1 3282 0.54 68% 5.8 3273 0.45 66% • • • • 

108.00 8.8 3300 0.65 70% 7.9 3291 0.60 69% 6.5 3282 0.50 67% • • • • 

140TC 180TC 

90 100 112 

97.50 9.7 3309 0.72 70% 8.7 3300 0.65 69% 7.2 3282 0.54 68% • • • • • 

88.40 10.7 3318 0.79 71% 9.6 3309 0.72 70% 7.9 3291 0.60 69% • • • • • 

80.44 11.8 3326 0.87 71% 10.6 3318 0.79 71% 8.7 3300 0.65 69% • • • • • 

71.12 13.4 3300 0.97 71% 12 3326 0.88 71% 9.8 3309 0.73 70% • • • • • 

65.68 14.5 3211 1.03 72% 12.9 3335 0.95 71% 10.7 3318 0.79 71% • • • • • 

56.55 16.8 3079 1.13 72% 15 3194 1.05 72% 12.4 3326 0.92 71% • • • • • 

51.41 18.5 2990 1.21 72% 16.5 3096 1.12 72% 13.6 3291 0.99 71% • • • • • 

46.93 20 2530 0.92 87% 18.1 2512 0.83 86% 14.9 2477 0.68 85% • • • • 

42.00 23 2769 1.15 88% 20 2751 1.00 87% 16.7 2707 0.83 86% • • • • 

37.28 25 2327 1.04 88% 23 2309 0.96 90% 18.8 2282 0.79 87% • • • • 

32.67 29 2327 1.20 89% 26 2318 1.08 88% 21 2291 0.87 87% • • • • 

28.72 33 2530 1.48 89% 30 2521 1.35 89% 24 2503 1.08 88% • • • • 

25.95 37 2442 1.60 89% 33 2433 1.43 89% 27 2415 1.16 88% • • • • 

22.61 42 2380 1.76 90% 38 2380 1.60 89% 31 2362 1.31 89% • • • • 

20.31 47 2477 2.06 90% 42 2477 1.84 90% 34 2468 1.48 89% • • • • 

18.33 52 2645 2.43 90% 46 2645 2.15 90% 38 2636 1.78 89% • • • • • 

16.62 57 2592 2.60 90% 51 2583 2.33 90% 42 2583 1.91 90% • • • • • 

15.13 63 2353 2.62 90% 56 2353 2.33 90% 46 2353 1.91 90% • • • • • 

13.37 71 2079 2.61 90% 64 2079 2.35 90% 52 2079 1.91 90% • • • • • 

12.35 77 2203 2.98 90% 69 2203 2.68 90% 57 2194 2.21 90% • • • • • 

10.63 89 2247 3.53 90% 80 2247 3.17 90% 66 2247 2.61 90% • • • • • 

9.67 98 2150 3.72 90% 88 2150 3.33 90% 72 2150 2.73 90% • • • • • 

210TC 

132 

250TC 

160





Ratio 

[-] 

n 2 

[rpm] 



T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 63 

56C 

71 80 

320.67 1.6 3229 0.14 54% 0.78 3229 0.08 51% 0.031 3220




(450) 655-7447 


www.dstech.ca 






6 - 34 

Ratio 

[-] 

n 2 

[rpm] 

n Mot = 1750 rpm n Mot = 1450 rpm Size for motor 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 71 

28203 0.06 5972





Ratio 

[-] 

n 2 

[rpm] 



T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 63 

364.00 4.8 6034 0.65 70% 4 6016 0.56 68% 3.2 6007 0.46 65% • • 

56C 

71 80 

323.70 5.4 6034 0.73 71% 4.5 6025 0.63 69% 3.6 6016 0.50 67% • • • 

280.80 6.2 6052 0.83 72% 5.2 6034 0.71 70% 4.1 6025 0.57 68% • • • • 

262.36 6.7 6052 0.89 72% 5.5 6043 0.75 71% 4.4 6025 0.61 69% • • • • 

230.75 7.6 6060 1.00 73% 6.3 6052 0.84 72% 5 6034 0.68 70% • • • • 

140TC 

90 

202.09 8.7 5786 1.08 73% 7.2 6060 0.95 72% 5.7 6043 0.76 71% • • • • • 

180TC 

100 112 

178.75 9.8 5547 1.16 74% 8.1 5857 1.03 73% 6.4 6052 0.85 72% • • • • • • 

162.00 10.8 5361 1.24 74% 9 6078 1.17 73% 7.1 6043 0.93 72% • • • • • • 

143.00 12.2 5140 1.34 74% 10.1 5450 1.17 74% 8 5830 1.01 73% • • • • • • 

129.00 13.6 4954 1.43 74% 11.2 5264 1.26 74% 8.9 5645 1.08 73% • • • • • • 

117.00 15 4795 1.54 74% 12.4 6113 1.62 74% 9.8 5476 1.15 74% • • • • • • 

106.60 16.4 4654 1.62 74% 13.6 4946 1.43 74% 10.8 5317 1.23 74% • • • • • • 

97.50 17.9 4521 1.72 74% 14.9 6140 1.95 74% 11.8 5176 1.31 74% • • • • • • 

90.00 19.4 3070 1.07 88% 16.1 3043 0.89 87% 12.8 2999 0.71 86% • • • • 

84.09 21 4698 1.78 88% 17.2 4671 1.46 87% 13.7 4609 1.16 86% • • • • 

73.96 24 4839 2.09 88% 19.6 4813 1.71 88% 15.5 4769 1.35 87% • • • • 

64.77 27 5662 2.74 88% 22 5645 2.23 88% 17.8 5600 1.80 87% • • • • • 

57.29 31 5459 3.04 88% 25 5848 2.62 88% 20 6273 2.26 88% • • • • • • 

51.92 34 5299 3.23 88% 28 5839 2.93 88% 22 5813 2.30 88% • • • • • • 

45.83 38 5114 3.48 88% 32 6025 3.45 88% 25 5848 2.62 88% • • • • • • 

41.35 42 4946 3.72 89% 35 5255 3.29 88% 28 5653 2.84 88% • • • • • • 

37.50 47 4777 4.02 89% 39 5706 3.99 88% 31 5476 3.04 88% • • • • • • 

34.17 51 4654 4.24 89% 42 4963 3.73 89% 34 5317 3.24 88% • • • • • • 

31.25 56 4521 4.53 89% 46 4822 3.98 89% 37 5184 3.44 88% • • • • • • 

27.94 63 4362 4.91 89% 52 5246 4.89 89% 41 5034 3.69 89% • • • • • • 

25.66 68 4247 5.17 89% 57 5052 5.16 89% 45 4866 3.92 89% • • • • • • 

23.13 76 4105 5.58 89% 63 4928 5.56 89% 50 4724 4.23 89% • • • • • • 

19.89 88 3928 6.20 89% 73 4724 6.17 89% 58 4521 4.69 89% • • • • • • 

38.00 46 3866 3.13 90% 38 3857 2.60 90% 30 3848 2.05 89% • • • • • 

33.61 52 3848 3.53 90% 43 3848 2.92 90% 34 3840 2.30 90% • • • • • • 

30.46 57 3486 3.51 90% 48 3486 2.94 90% 38 3477 2.34 90% • • • • • • 

26.89 65 3592 4.11 90% 54 3592 3.41 90% 43 3592 2.72 90% • • • • • • 

24.26 72 3548 4.50 90% 60 3548 3.75 90% 47 3548 2.94 90% • • • • • • 

22.00 80 3778 5.33 90% 66 3778 4.39 90% 52 3778 3.47 90% • • • • • • 

20.04 87 3822 5.87 90% 72 3822 4.86 90% 57 3822 3.84 90% • • • • • • 

18.33 95 3733 6.26 90% 79 3733 5.20 90% 63 3733 4.15 90% • • • • • • 

16.39 107 3548 6.70 90% 88 3548 5.50 90% 70 3548 4.38 90% • • • • • • 

15.05 116 3548 7.25 90% 96 3548 6.00 90% 76 3548 4.75 90% • • • • • • 

13.57 129 3238 7.37 90% 107 3716 7.01 90% 85 3716 5.56 90% • • • • • • 

11.67 150 2787 7.37 90% 124 3344 7.30 90% 99 3344 5.83 90% • • • • • • 

210TC 

132 

250TC 

160 

6 - 35 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 






Ratio 

[-] 

6 - 36 

n 2 

[rpm] 


T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 63 

364.00 2.6 5998 0.38 63% 2.3 5998 0.34 62% 1.9 5990 0.29 60% • • 

56C 

71 80 

323.70 2.9 6007 0.42 65% 2.6 5998 0.38 63% 2.2 5998 0.33 62% • • • 

280.80 3.4 6016 0.49 66% 3 6007 0.44 65% 2.5 5998 0.37 63% • • • • 

262.36 3.6 6016 0.50 67% 3.2 6007 0.46 66% 2.7 5998 0.40 64% • • • • 

230.75 4.1 6025 0.57 68% 3.7 6016 0.52 67% 3 6007 0.44 65% • • • • 

140TC 180TC 

90 100 112 

202.09 4.7 6025 0.64 69% 4.2 6025 0.58 68% 3.5 6016 0.50 66% • • • • • 

178.75 5.3 6034 0.72 70% 4.8 6025 0.65 69% 3.9 6016 0.54 68% • • • • • • 

162.00 5.9 6043 0.79 71% 5.2 6034 0.71 70% 4.3 6025 0.60 69% • • • • • • 

143.00 6.6 6052 0.88 72% 5.9 6043 0.79 71% 4.9 6034 0.67 70% • • • • • • 

129.00 7.4 5937 0.96 73% 6.6 6052 0.88 72% 5.4 6034 0.73 71% • • • • • • 

117.00 8.1 5786 1.01 73% 7.3 5945 0.95 73% 6 6043 0.80 71% • • • • • • 

106.60 8.9 5636 1.08 73% 8 5804 1.00 73% 6.6 6052 0.88 72% • • • • • • 

97.50 9.7 5494 1.15 74% 8.7 5671 1.07 73% 7.2 5972 0.93 72% • • • • • • 

90.00 10.6 2964 0.58 85% 9.4 2937 0.52 84% 7.8 2884 0.42 82% • • • • 

84.09 11.3 4556 0.96 85% 10.1 4512 0.85 84% 8.3 4441 0.71 83% • • • • 

73.96 12.8 4715 1.11 86% 11.5 4680 1.00 85% 9.5 4609 0.83 84% • • • • 

64.77 14.7 5547 1.50 86% 13.1 5512 1.34 86% 10.8 5432 1.09 85% • • • • • 

57.29 16.6 6352 1.91 87% 14.8 6317 1.71 86% 12.2 6237 1.40 85% • • • • • • 

51.92 18.3 5777 1.91 87% 16.4 5751 1.71 87% 13.5 5689 1.42 86% • • • • • • 

45.83 21 5981 2.26 88% 18.5 5954 1.99 87% 15.3 5901 1.64 87% • • • • • • 

41.35 23 5919 2.45 88% 21 5901 2.23 88% 16.9 5857 1.80 87% • • • • • • 

37.50 25 5866 2.64 88% 23 6016 2.49 88% 18.7 6264 2.13 87% • • • • • • 

34.17 28 5671 2.85 88% 25 5875 2.64 88% 20 6299 2.27 88% • • • • • • 

31.25 30 5556 2.98 88% 27 5742 2.78 88% 22 6131 2.42 88% • • • • • • 

27.94 34 5353 3.27 88% 30 5574 3.00 88% 25 5910 2.65 88% • • • • • • 

25.66 37 5193 3.44 88% 33 5397 3.19 88% 27 5760 2.78 88% • • • • • • 

23.13 41 5043 3.71 89% 37 5220 3.45 88% 30 5591 3.01 88% • • • • • • 

19.89 48 4813 4.14 89% 43 4990 3.84 89% 35 5344 3.35 88% • • • • • • 

38.00 25 3831 1.70 89% 22 3813 1.50 89% 18.4 3778 1.26 88% • • • • • 

33.61 28 3822 1.90 89% 25 3813 1.70 89% 21 3786 1.42 88% • • • • • • 

30.46 31 3468 1.90 89% 28 3459 1.72 89% 23 3441 1.42 89% • • • • • • 

26.89 35 3583 2.22 90% 32 3574 2.02 89% 26 3556 1.64 89% • • • • • • 

24.26 39 3539 2.43 90% 35 3539 2.19 90% 29.0. 3530 1.82 89% • • • • • • 

22.00 43 3778 2.86 90% 39 3769 2.60 90% 32 3760 2.13 89% • • • • • • 

20.04 47 3822 3.17 90% 42 3822 2.84 90% 35 3813 2.35 90% • • • • • • 

18.33 52 3733 3.43 90% 46 3733 3.02 90% 38 3725 2.50 90% • • • • • • 

16.39 58 3548 3.63 90% 52 3548 3.25 90% 43 3539 2.69 90% • • • • • • 

15.05 63 3539 3.94 90% 56 3539 3.49 90% 47 3539 2.93 90% • • • • • • 

13.57 70 3707 4.58 90% 63 3707 4.12 90% 52 3707 3.40 90% • • • • • • 

11.67 81 3344 4.77 90% 73 3344 4.30 90% 60 3335 3.53 90% • • • • • • 

210TC 

132 

250TC 

160





Ratio 

[-] 

n 2 

[rpm] 



T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 63 

364.00 1.4 5990 0.22 58% 0.69 5981 0.12 54% 0.027 5963




(450) 655-7447 


www.dstech.ca 






6 - 38 

Ratio 

[-] 

n 2 

[rpm] 

n Mot= 1750 rpm n Mot= 1450 rpm Size for motor 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

33491 0.05 14068





Ratio 

[-] 

n 2 

[rpm] 



T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 63 

56C 

71 80 

440.70 4 14068 1.24 71% 3.3 14068 1.05 70% 2.6 14068 0.85 67% • • • 

390.00 4.5 14077 1.39 72% 3.7 14068 1.16 71% 2.9 14068 0.93 69% • • • • 

354.55 4.9 13997 1.48 73% 4.1 14068 1.27 72% 3.2 14068 1.03 70% • • • • 

318.50 5.5 13422 1.59 73% 4.6 14050 1.42 72% 3.6 14068 1.13 71% • • • • 

140TC 180TC 

90 100 112 

273.00 6.4 12626 1.74 74% 5.3 13325 1.52 73% 4.2 14077 1.30 72% • • • • • 

247.00 7.1 12086 1.83 74% 5.9 12767 1.79 74% 4.7 13572 1.39 72% • • • • • • 

228.00 7.7 11652 1.91 74% 6.4 12334 1.93 74% 5 13227 1.43 73% • • • • • • 

198.25 8.8 11148 2.09 74% 7.3 11829 1.84 74% 5.8 12661 1.58 74% • • • • • • • 

180.00 9.7 10785 2.22 74% 8.1 11431 2.43 74% 6.4 12289 1.68 74% • • • • • • • 

164.36 10.6 10458 2.35 74% 8.8 11121 2.09 74% 7 11953 1.79 74% • • • • • • • 

150.80 11.6 10139 2.50 74% 9.6 10794 2.21 74% 7.6 11635 1.89 74% • • • • • • • 

138.94 12.6 9856 2.64 74% 10.4 10502 2.33 74% 8.3 11298 1.99 74% • • • • • • • 

126.18 13.9 9529 2.81 74% 11.5 10139 3.33 74% 9.1 10953 2.13 74% • • • • • • • 

114.95 15.2 9219 2.98 74% 12.6 9812 2.64 74% 10 10591 2.25 74% • • • • • • • 

108.50 16.1 11971 3.52 87% 13.4 11918 2.93 86% 10.6 11820 2.31 85% • • • • • 

98.17 17.8 11847 3.86 87% 14.8 12564 3.43 86% 11.7 12528 2.70 86% • • • • • • 

90.62 19.3 11130 3.92 87% 16 11104 3.25 87% 12.7 11042 2.58 86% • • • • • • 

78.79 22 10998 4.42 87% 18.4 11661 3.92 87% 14.6 12050 3.23 86% • • • • • • • 

71.54 24 10679 4.67 87% 20 11343 4.14 87% 16.1 11511 3.39 87% • • • • • • • 

65.32 27 10272 5.06 87% 22 10989 4.42 87% 17.6 11820 3.80 87% • • • • • • • 

59.93 29 10024 5.30 87% 24 10670 4.67 87% 19.2 11484 4.03 87% • • • • • • • 

55.22 32 9697 5.67 87% 26 10387 4.93 87% 21 11148 4.27 87% • • • • • • • 

50.15 35 9414 6.01 87% 29 10015 6.09 87% 23 10821 4.54 87% • • • • • • • 

45.68 38 9122 6.32 87% 32 9662 6.46 87% 25 10493 4.78 87% • • • • • • • 

41.85 42 8839 6.78 87% 35 9396 6.86 87% 27 10245 5.05 87% • • • • • • • 

37.34 47 8529 7.31 87% 39 9078 7.41 87% 31 9794 5.54 87% • • • • • • • 

33.33 52 7228 6.48 92% 43 7228 5.36 92% 34 7219 4.24 92% • • • • • • 

28.30 53 8219 7.96 87% 44 8750 8.02 87% 35 9440 6.03 87% • • • • • • 

23.56 57 7228 7.11 92% 47 7228 5.87 92% 37 7228 4.61 92% • • • • • • 

33.85 62 7211 7.72 92% 51 7211 6.35 92% 41 7211 5.10 92% • • • • • • • 

30.90 62 7812 8.84 87% 51 8343 7.77 87% 41 8971 6.71 87% • • • • • • • 

28.36 67 7211 8.33 92% 56 7211 6.97 92% 44 7211 5.48 92% • • • • • • • 

26.13 74 6751 8.61 92% 61 6751 7.10 92% 48 6751 5.58 92% • • • • • • • 

23.73 74 7281 9.83 87% 62 7724 10.0 87% 49 8361 7.47 87% • • • • • • • 

21.61 81 7202 10.0 92% 67 7202 8.32 92% 53 7202 6.59 92% • • • • • • • 

19.80 88 7096 10.7 92% 73 7096 8.94 92% 58 7096 7.10 92% • • • • • • • 

17.67 99 7034 12.0 92% 82 7034 9.95 92% 65 7034 7.89 92% • • • • • • • 

15.77 111 6866 13.1 92% 92 6910 10.9 92% 73 6910 8.71 92% • • • • • • 

13.39 131 6432 14.5 92% 108 6866 12.8 92% 86 7131 10.5 92% • • • • • • 

11.15 157 5804 14.7 92% 130 6025 13.5 92% 103 6025 10.7 92% • • • • • • 

210TC 

132 

250TC 

160 

6 - 39 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 






Ratio 

[-] 

6 - 40 

n 2 

[rpm] 


T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 63 

56C 

71 80 

440.70 2.2 13758 0.73 65% 1.9 13484 0.64 64% 1.6 13015 0.53 62% • • • 

390.00 2.4 14068 0.80 67% 2.2 14068 0.75 65% 1.8 14068 0.64 63% • • • • 

354.55 2.7 14068 0.89 68% 2.4 14068 0.80 66% 2.0 14068 0.69 64% • • • • 

318.50 3 14068 0.97 69% 2.7 14068 0.89 68% 2.2 14068 0.75 65% • • • • 

140TC 

90 

273.00 3.5 14068 1.11 70% 3.1 14068 1.00 69% 2.6 14068 0.87 67% • • • • • 

180TC 

100 112 

247.00 3.8 14068 1.19 71% 3.4 14068 1.08 70% 2.8 14068 0.91 68% • • • • • • 

228.00 4.2 13794 1.28 72% 3.7 14068 1.16 71% 3.1 14068 1.00 69% • • • • • • 

198.25 4.8 13325 1.39 73% 4.3 13687 1.30 72% 3.5 14068 1.11 70% • • • • • • • 

180.00 5.3 12971 1.48 73% 4.7 13387 1.38 73% 3.9 13988 1.21 71% • • • • • • • 

164.36 5.8 12634 1.58 73% 5.2 13015 1.47 73% 4.3 13652 1.30 72% • • • • • • • 

150.80 6.3 12316 1.66 74% 5.6 12749 1.54 73% 4.6 13431 1.35 72% • • • • • • • 

138.94 6.8 12024 1.75 74% 6.1 12422 1.63 74% 5.0 13130 1.43 73% • • • • • • • 

126.18 7.5 11652 1.86 74% 6.7 12059 1.72 74% 5.5 12776 1.51 73% • • • • • • • 

114.95 8.3 11245 1.99 74% 7.4 11661 1.84 74% 6.1 12360 1.62 74% • • • • • • • 

108.50 8.8 11688 1.93 85% 7.8 11599 1.71 84% 6.5 11413 1.42 83% • • • • • 

98.17 9.7 12413 2.25 85% 8.7 12334 2.01 85% 7.1 12148 1.64 83% • • • • • • 

90.62 10.5 10962 2.13 85% 9.4 10891 1.91 85% 7.7 10750 1.56 84% • • • • • • 

78.79 12.1 11980 2.68 86% 10.8 11927 2.38 86% 8.9 11803 1.97 85% • • • • • • • 

71.54 13.3 11458 2.80 86% 11.9 11413 2.50 86% 9.8 11316 2.06 85% • • • • • • • 

65.32 14.5 12564 3.35 86% 13.0 12997 3.10 86% 10.7 13767 2.73 86% • • • • • • • 

59.93 15.9 12201 3.55 87% 14.2 12643 3.29 86% 11.7 13404 2.89 86% • • • • • • • 

55.22 17.2 11891 3.73 87% 15.4 12316 3.48 87% 12.7 12661 2.96 86% • • • • • • • 

50.15 18.9 11537 3.99 87% 17.0 11935 3.71 87% 14.0 12688 3.27 86% • • • • • • • 

45.68 21 11113 4.26 87% 18.6 11564 3.92 87% 15.3 12307 3.45 87% • • • • • • • 

41.85 23 10803 4.54 87% 20.0 11316 4.14 87% 16.7 11989 3.67 87% • • • • • • • 

37.34 25 10520 4.79 87% 23.0 10812 4.54 87% 18.7 11573 3.95 87% • • • • • • • 

33.33 29 10051 5.32 87% 26.0 10422 4.94 87% 21.0 11183 4.28 87% • • • • • • 

28.30 34 9546 5.92 87% 30.0 9954 5.45 87% 25.0 10573 4.82 87% • • • • • • 

23.56 40 8945 6.52 87% 36.0 9263 6.08 87% 30.0 9838 5.38 87% • • • • • • 

33.85 28 7211 3.49 92% 25.0 7202 3.12 92% 21.0 7184 2.62 91% • • • • • • • 

30.90 31 7219 3.87 92% 28.0 7211 3.49 92% 23.0 7193 2.86 91% • • • • • • • 

28.36 34 7202 4.23 92% 30.0 7202 3.73 92% 25.0 7184 3.10 92% • • • • • • • 

26.13 36 7202 4.47 92% 33.0 7202 4.10 92% 27.0 7193 3.36 92% • • • • • • • 

23.73 40 6751 4.66 92% 36.0 6742 4.19 92% 30.0 6742 3.49 92% • • • • • • • 

21.61 44 7202 5.46 92% 39.0 7193 4.85 92% 32.0 7193 3.98 92% • • • • • • • 

19.80 48 7096 5.88 92% 43.0 7096 5.26 92% 35.0 7096 4.28 92% • • • • • • • 

17.67 54 7034 6.55 92% 48.0 7034 5.83 92% 40.0 7034 4.86 92% • • • • • • • 

15.77 60 6910 7.15 92% 54.0 6910 6.44 92% 44.0 6910 5.25 92% • • • • • • 

13.39 71 7131 8.75 92% 63.0 7131 7.76 92% 52.0 7131 6.40 92% • • • • • • 

11.15 85 6025 8.84 92% 76.0 6025 7.90 92% 63.0 6025 6.55 92% • • • • • • 

210TC 

132 

250TC 

160





Ratio 

[-] 

n 2 

[rpm] 



T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 

n 2 

[rpm] 

T 2 

[lb in] 

P Mot 

[hp] 

η 

[%] 63 

56C 

71 80 

440.70 2.2 13758 0.73 65% 1.9 13484 0.64 64% 1.6 13015 0.53 62% • • • 

390.00 2.4 14068 0.80 67% 2.2 14068 0.75 65% 1.8 14068 0.64 63% • • • • 

354.55 2.7 14068 0.89 68% 2.4 14068 0.80 66% 2.0 14068 0.69 64% • • • • 

318.50 3.0 14068 0.97 69% 2.7 14068 0.89 68% 2.2 14068 0.75 65% • • • • 

140TC 180TC 

90 100 112 

273.00 3.5 14068 1.11 70% 3.1 14068 1.00 69% 2.6 14068 0.87 67% • • • • • 

247.00 3.8 14068 1.19 71% 3.4 14068 1.08 70% 2.8 14068 0.91 68% • • • • • • 

228.00 4.2 13794 1.28 72% 3.7 14068 1.16 71% 3.1 14068 1.00 69% • • • • • • 

198.25 4.8 13325 1.39 73% 4.3 13687 1.30 72% 3.5 14068 1.11 70% • • • • • • • 

180.00 5.3 12971 1.48 73% 4.7 13387 1.38 73% 3.9 13988 1.21 71% • • • • • • • 

164.36 5.8 12634 1.58 73% 5.2 13015 1.47 73% 4.3 13652 1.30 72% • • • • • • • 

150.80 6.3 12316 1.66 74% 5.6 12749 1.54 73% 4.6 13431 1.35 72% • • • • • • • 

138.94 6.8 12024 1.75 74% 6.1 12422 1.63 74% 5.0 13130 1.43 73% • • • • • • • 

126.18 7.5 11652 1.86 74% 6.7 12059 1.72 74% 5.5 12776 1.51 73% • • • • • • • 

114.95 8.3 11245 1.99 74% 7.4 11661 1.84 74% 6.1 12360 1.62 74% • • • • • • • 

108.50 8.8 11688 1.93 85% 7.8 11599 1.71 84% 6.5 11413 1.42 83% • • • • • 

98.17 9.7 12413 2.25 85% 8.7 12334 2.01 85% 7.1 12148 1.64 83% • • • • • • 

90.62 10.5 10962 2.13 85% 9.4 10891 1.91 85% 7.7 10750 1.56 84% • • • • • • 

78.79 12.1 11980 2.68 86% 10.8 11927 2.38 86% 8.9 11803 1.97 85% • • • • • • • 

71.54 13.3 11458 2.80 86% 11.9 11413 2.50 86% 9.8 11316 2.06 85% • • • • • • • 

65.32 14.5 12564 3.35 86% 13.0 12997 3.10 86% 10.7 13767 2.73 86% • • • • • • • 

59.93 15.9 12201 3.55 87% 14.2 12643 3.29 86% 11.7 13404 2.89 86% • • • • • • • 

55.22 17.2 11891 3.73 87% 15.4 12316 3.48 87% 12.7 12661 2.96 86% • • • • • • • 

50.15 18.9 11537 3.99 87% 17.0 11935 3.71 87% 14.0 12688 3.27 86% • • • • • • • 

45.68 21.0 11113 4.26 87% 18.6 11564 3.92 87% 15.3 12307 3.45 87% • • • • • • • 

41.85 23.0 10803 4.54 87% 20.0 11316 4.14 87% 16.7 11989 3.67 87% • • • • • • • 

37.34 25.0 10520 4.79 87% 23.0 10812 4.54 87% 18.7 11573 3.95 87% • • • • • • • 

33.33 29.0 10051 5.32 87% 26.0 10422 4.94 87% 21.0 11183 4.28 87% • • • • • • 

28.30 34.0 9546 5.92 87% 30.0 9954 5.45 87% 25.0 10573 4.82 87% • • • • • • 

23.56 40.0 8945 6.52 87% 36.0 9263 6.08 87% 30.0 9838 5.38 87% • • • • • • 

33.85 28.0 7211 3.49 92% 25.0 7202 3.12 92% 21.0 7184 2.62 91% • • • • • • • 

30.90 31.0 7219 3.87 92% 28.0 7211 3.49 92% 23.0 7193 2.86 91% • • • • • • • 

28.36 34.0 7202 4.23 92% 30.0 7202 3.73 92% 25.0 7184 3.10 92% • • • • • • • 

26.13 36.0 7202 4.47 92% 33.0 7202 4.10 92% 27.0 7193 3.36 92% • • • • • • • 

23.73 40.0 6751 4.66 92% 36.0 6742 4.19 92% 30.0 6742 3.49 92% • • • • • • • 

21.61 44.0 7202 5.46 92% 39.0 7193 4.85 92% 32.0 7193 3.98 92% • • • • • • • 

19.80 48.0 7096 5.88 92% 43.0 7096 5.26 92% 35.0 7096 4.28 92% • • • • • • • 

17.67 54.0 7034 6.55 92% 48.0 7034 5.83 92% 40.0 7034 4.86 92% • • • • • • • 

15.77 60.0 6910 7.15 92% 54.0 6910 6.44 92% 44.0 6910 5.25 92% • • • • • • 

13.39 71.0 7131 8.75 92% 63.0 7131 7.76 92% 52.0 7131 6.40 92% • • • • • • 

11.15 85.0 6025 8.84 92% 76.0 6025 7.90 92% 63.0 6025 6.55 92% • • • • • • 

210TC 250TC 

132 160 

6 - 41 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Improvement of Sealing Quality C.38-88 


6 - 42 

Housing 

4 

2 

Shaft 

4 

1 

3 

3 








C.28 double sealing optional. 


box, in sizes C. 38 ... C. 88 a breather must replace the plug screw. The breather dimensions are as follows. 


(0.79”) 

20 

C.38 ... 88 

ø27 

(ø1.06”) 

ø22 

(ø0.87”) 

4 

(0.16”)





Types øBD1 øBI1 øBI2 Ll1 


CAF. 28 120 4.72 70 2.76 72 2.84 24 0.95 

CAF. 28 160 6.30 70 2.76 103 4.06 8.5 0.34 

CAF. 38 160 6.30 70 2.76 77 3.03 20 0.79 

CAF. 48 200 7.87 84 3.31 90 3.54 22.5 0.89 

CAF. 68 200 7.87 100 3.94 100 3.94 - - 

CAF. 68 250 9.84 96 3.80 96 3.78 - - 

CAF. 88 250 9.84 124 4.88 124 4.88 - - 

CAF. 88 300 11.81 126 4.96 138 5.43 31 1.22 

6 - 43 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CAF, CAZ, CAD, CAFS 1) , CAZS 1) , CADS 1) , CAFT, CAZT, CADT Dimensions in 



C. 28 

2.28 

58 

4.02 

102 

1.42 

36 

- - - 

C. 38 

3.24 

82.2 

4.53 

115 

1.57 

40 

4.72 

120 

0.39 

10 

1.30 

33 

C. 48 

3.90 

99 

5.12 

130 

1.73 

44 

5.20 

132 

0.39 

10 

1.30 

33 

C. 68 

4.53 

115 

5.91 

150 

2.46 

62.5 

5.91 

150 

0.39 

10 

1.46 

37 

C. 88 

5.39 

137 

7.48 

190 

2.76 

70 

7.48 

190 

0.51 

13 

1.97 

50 

1) For CAFS, CAZS and CADS only steel protection cover is possible. 

6 - 44 

casting 

steel 

inch 

mm




C28 / CZ28 6 - 48 

C38 6 - 58 

C48 6 - 70 

C68 6 - 82 

C88 6 - 94 

CF28 6 - 50 

CF38 6 - 60 

CF48 6 - 72 

CF68 6 - 84 

CF88 6 - 96 

CA28 / CAZ28 6 - 52 

CA38 6 - 62 

CA48 6 - 74 

CA68 6 - 86 

CA88 6 - 98 

CAD28 6 - 54 





CAF28 6 - 56 

CAF38 6 - 66 

CAF48 6 - 78 

CAF68 6 - 90 

CAF88 6 - 102 

6 - 45 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



6 - 46 


CAZ38 6 - 68 

CAZ48 6 - 80 

CAZ68 6 - 92 

CAZ88 6 - 104 



CA.S38 ... CA.S88 6 - 108 

C.38-Z28 ...C.88-D/Z38 6 - 109


6 - 47 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Worm Helical Gear Motors 

Foot mounted 


C28 

CZ28 

Mounting 

E F G H 

2.76 3.54 0.31 0.35 

Output Shaft 


0.75 1.57 1.25 0.01 0.83 0.1875 2.17 1/4-20UNC 

Gearcase 

BD AK B2 AJ B BB JA JB FA D DB PB1 QC QB WG P2 EA TAP BF 

4.02 2.91 1.77 3.39 4.13 0.12 0.98 0.98 1.38 2.48 0.37 3.78 2.48 4.15 2.17 2.78 3.94 M8x16 

Motor 

C/CZ28 Weight [lb] 

Motor C CB P AB AA C28 

LA71 13.90 16.06 5.47 5.75 1/2" + 3/4" 22 

LA71Z 14.65 16.81 5.47 5.75 1/2" + 3/4" 24 


6 - 48 

C 510 

CZ 510 

[inch]


Foot mounted 


C28 

CZ28 

Mounting 

E F G H 

70 90 8 9 

Output Shaft 


19,05 40 31,75 0,254 21,08 4,763 55 1/4“-20UNC 


C 510 

CZ 510 

Gearcase 

BD AK B2 AJ B BB JA JB FA D DB PB1 QC QB WG P2 EA TAP BF 

102 74 45 86 105 3 25 25 35 63 9,5 96 63 105,5 55 70,5 100 M8x16 

Motor 

C/CZ28 Weight [kg] 

Motor C CB P AB AA C.28 

LA71 353.0 408.0 139.0 146.0 1/2" + 3/4" 10 

LA71Z 372.0 427.0 139.0 146.0 1/2" + 3/4" 11 


[mm] 

6 - 49 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CF28 CF 510 

Flange 

BD AK GA AJ BB BF A10 

4.72 3.15 0.31 3.94 0.12 0.26 - 

6.3 4.33 0.35 5.12 0.14 0.35 5.35 

Output Shaft 


0.75 1.57 1.25 0.01 0.83 0.1875 1.57 1/4-20UNC 

Gearcase 

E BDB FA F AKB BBB B2 G AJB B D DB JB JA PB1 QC QB WG P2 EA H TAP BFB 

2.76 4.02 1.38 3.54 2.91 0.12 1.77 0.31 3.39 4.13 2.48 0.37 0.98 0.98 3.78 2.48 4.15 2.17 2.78 4.72 0.354 M8X16 

Motor 

CF28 Weight [lb] 

Motor C CB P AB AA CF28 

LA71 13.90 16.06 5.47 5.75 1/2" + 3/4" 26 

LA71Z 14.65 16.81 5.47 5.75 1/2" + 3/4" 26 


6 - 50 

BD = 6.3" 

[inch]



Mounting 

BD AK GA AJ BB BF A10 

120 80 8 100 3 6,6 - 

160 110 9 130 3.5 9 136 

Output Shaft 


19,05 40 31,75 0,254 21,08 4,763 40 1/4“-20UNC 


CF28 CF 510 

Gearcase 

E BDB FA F AKB BBB B2 G AJB B D DB JB JA PB1 QC QB WG P2 EA H TAP BFB 

70 102 35 90 74 3 45 8 86 105 63 9,5 25 25 96 63 105,5 55 70,5 120 9 M8X16 

Motor 

CF28 Weight [kg] 


LA71 353.0 408.0 139.0 146.0 1/2" + 3/4" 12 

LA71Z 372.0 427.0 139.0 146.0 1/2" + 3/4" 12 


BD = 160mm 

[mm] 

6 - 51 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Shaft mounted 


CA28 

CAZ28 

Mounting 

E F FA G H 

2.76 3.54 1.38 0.31 0.35 

Output Shaft 

U UF VC VG VL VH M BOLT UY Y EA EB Q1 

0.75 1.575 4.724 4.173 3.74 1.047 1/2-13UNC 0.847 0.188 2.36 1.575 2.44 

Gearcase 

BD AK B2 AJ B BB D DB JB JA PB1 QC QB WG P2 TAP BF 

4.02 2.91 1.77 3.39 4.13 0.12 2.48 0.37 0.98 0.98 3.78 2.48 4.15 2.17 2.78 M8x16 

Motor 

CA/CAZ28 Weight [lb] 

Motor C CB P AB AA CA.28 

LA71 13.90 16.06 5.47 5.75 1/2" + 3/4" 20 

LA71Z 14.65 16.81 5.47 5.75 1/2" + 3/4" 22 


6 - 52 

CA 510 

CAZ 510 

[inch]


Shaft mounted 


CA28 

CAZ28 

Mounting 

E F FA G H 

70 90 35 8 9 


Output Shaft 


19,05 40 120 106 95 27 1/2“-13UNC 21,59 4,826 60 40 62 

CA 510 

CAZ 510 

Gearcase 

BD AK B2 AJ B D DB JB JA PB1 QC QB WG P2 TAP BF 

102 74 45 86 105 63 9,5 25 25 96 63 105,5 55 70,5 M8x16 

Motor 

CA/CAZ28 Weight [kg] 

Motor C CB P AB AA CA.28 

LA71 353.0 408.0 139.0 146.0 1/2" + 3/4" 9 

LA71Z 372.0 427.0 139.0 146.0 1/2" + 3/4" 10 


[mm] 

6 - 53 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CAD28 CAD 510 

Mounting 

BD AK BB AJB TAP BFB G 

4.02 

Torque Arm 

2.91 0.12 3.39 M8x16 0.31 

FV GF UGF SB WF Q3 Q5 

0.51 0.43 0.98 4.33 2.62 2.4 2.52 

Output Shaft 


0.75 1.575 4.72 4.173 3.74 1.05 1/2-13UNC 0.85 0.19 2.36 1.575 2.44 

Gearcase 

E FA B2 B D DB PB1 JA JB QC QB WG P2 

2.76 1.38 1.77 4.13 2.48 0.37 3.78 0.98 0.98 2.48 4.15 2.05 2.78 

Motor 

CAD28 Weight [lb] 

Motor C CB P AB AA CAD28 

LA71 13.90 16.06 5.47 5.75 1/2" + 3/4" 22 

LA71Z 14.65 16.81 5.47 5.75 1/2" + 3/4" 24 


6 - 54 

[inch]



Mounting 

AK BB BD AJB TAP BFB G 

74 

Torque Arm 

3 102 86 M8x16 8 

FV GF UGF SB WF Q3 Q5 

13 11 25 110 66,5 61 64 



Output Shaft 


19,05 40 120 106 95 27 1/2“-13UNC 21,59 4,826 60 40 62 

Gearcase 

E FA B2 B JA JB DB PB1 QC QB WG P2 

70 35 45 105 25 25 9,5 96 63 105,5 55 70,5 

Motor 

CAD28 Weight [kg] 


LA71 353.0 408.0 139.0 146.0 1/2" + 3/4" 10 

LA71Z 372.0 427.0 139.0 146.0 1/2" + 3/4" 11 


[mm] 

6 - 55 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CAF28 CAF 510 

Mounting 

BD AK GA AJ BB Q3 BF A10 

4.72 3.15 0.31 3.94 0.12 3.15 0.26 - 

6.3 4.33 0.35 5.12 0.14 3.15 0.35 5.35 

Output Shaft 


0.75 1.575 4.72 4.173 3.74 1.05 1/2-13UNC 0.85 0.19 2.36 1.575 2.44 

Gearcase 

E BDB FA F AKB BBB B2 G AJB B D DB JB JA PB1 QC QB WG P2 H TAP BFB 

2.76 4.02 1.38 3.54 2.91 0.12 1.77 0.31 3.39 4.13 2.48 0.37 0.98 0.98 3.78 2.48 4.15 2.17 2.78 0.35 M8X16 

Motor 

CAF28 Weight [lb] 

Motor C CB P AB AA CAF28 

LA71 13.90 16.06 5.47 5.75 1/2" + 3/4" 24 

LA71Z 14.65 16.81 5.47 5.75 1/2" + 3/4" 26 


6 - 56 

BD = 6.3" 

[inch]



Mounting 

BD AK GA AJ BB Q3 BF A10 

120 80 8 100 3 80 6,6 - 

160 110 9 130 3,5 80 9 136 


CAF28 CAF 510 

Output Shaft 


19,05 40 120 106 27 95 1/2“-13UNC 21,59 4,826 60 40 62 

Gearcase 

E BDB FA F AKB B2 G AJB BBB B D DB JB JA PB1 QC QB WG P2 H TAP BFB 

70 102 35 90 74 45 8 86 3 105 63 9,5 25 25 96 63 105,5 55 70,5 9 M8X16 

Motor 

CAF28 Weight [kg] 


LA71 353.0 408.0 139.0 146.0 1/2" + 3/4" 11 

LA71Z 372.0 427.0 139.0 146.0 1/2" + 3/4" 12 


BD = 160mm 

[mm] 

6 - 57 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Foot mounted 

C38 C 510 

Mounting 

E F FA G H 

3.15 3.94 1.38 0.59 0.43 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 2.36 3/8-16UNC 

Gearcase 

B D QF QE PB2 DB JB JA PB1 X QC QB WG P2 EA 

4.72 3.94 1.77 1.38 2.99 0.37 1.57 1.42 4.92 0.16 2.95 4.27 2.24 2.95 4.33 

Motor 

C38 Weight [lb] 


LA71 17.40 19.57 5.47 5.75 1/2" + 3/4" 46 

LA71Z 18.15 20.31 5.47 5.75 1/2" + 3/4" 46 

LA80 18.86 21.36 6.16 6.10 1/2" + 3/4" 57 

LA90S 20.08 22.87 6.85 6.42 1/2" + 3/4" 68 

LA90Z 21.85 24.65 6.85 6.42 1/2" + 3/4" 68 

LA100Z 24.65 27.83 7.68 6.61 1/2" + 3/4" 88 


6 - 58 

B A 

[inch]


Foot mounted 

Mounting 

E F FA G H 

80 100 35 15 11 

Output Shaft 


25,4 50 38,1 6,401 28,19 6,35 60 3/8“-16UNC 


C38 C 510 

B A 

Gearcase 


120 100 45 35 76 9,5 40 36 125 4 75 108,5 57 75 110 

Motor 

C38 Weight [kg] 


LA71 442.0 497.0 139.0 146.0 1/2" + 3/4" 21 

LA71Z 461.0 516.0 139.0 146.0 1/2" + 3/4" 21 

LA80 479.0 542.5 156.5 155.0 1/2" + 3/4" 26 

LA90S 510.0 581.0 174.0 163.0 1/2" + 3/4" 31 

LA90Z 555.0 626.0 174.0 163.0 1/2" + 3/4" 31 

LA100Z 626.0 707.0 195.0 168.0 2 x 3/4" 40 


[mm] 

6 - 59 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CF38 CF 510 

Flange 


6.3 4.33 0.39 5.12 0.14 0.35 

Output Shaft 


1 1.97 1.5 0.252 1.11 0.25 1.97 3/8-16UNC 

Gearcase 

E FA FJA FJB F G B D PB2 DB JB JA PB1 X QC QB WG P2 EA TAP H 

4.61 2.5 1.38 1.52 2.36 0.39 3.94 3.94 2.99 0.37 1.18 1.46 4.92 0.16 2.95 4.27 2.24 2.91 5.28 M10x17 

Motor 



LA71 17.40 19.57 5.47 5.75 1/2" + 3/4" 55 

LA71Z 18.15 20.31 5.47 5.75 1/2" + 3/4" 55 

LA80 18.86 21.36 6.16 6.10 1/2" + 3/4" 66 

LA90S 20.08 22.87 6.85 6.42 1/2" + 3/4" 75 

LA90Z 21.85 24.65 6.85 6.42 1/2" + 3/4" 75 

LA100Z 24.65 27.83 7.68 6.61 2 x 3/4” 97 


6 - 60 

A 

[inch]



Flange 


160 110 10 130 3,5 9 

Output Shaft 


25,4 50 38,1 6,401 28,19 6,35 50 3/8“-16UNC 


CF38 CF 510 

Gearcase 


117 63,5 35 38,5 60 10 100 100 76 9,5 30 37 125 4 75 108,5 57 74 134 M10x17 

Motor 



LA71 442.0 497.0 139.0 146.0 1/2" + 3/4" 25 

LA71Z 461.0 516.0 139.0 146.0 1/2" + 3/4" 25 

LA80 479.0 542.5 156.5 155.0 1/2" + 3/4" 30 

LA90S 510.0 581.0 174.0 163.0 1/2" + 3/4" 34 

LA90Z 555.0 626.0 174.0 163.0 1/2" + 3/4" 34 

LA100Z 626.0 707.0 195.0 168.0 2 x 3/4" 44 


A 

[mm] 

6 - 61 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Shaft mounted 

CA38 CA 510 

Mounting 

E F FA G H 

3.15 3.94 1.38 0.59 0.43 

Output Shaft 


1.25 1.772 4.72 4.016 3.54 1.38 3/8-16UNC 1.38 0.25 2.36 1.732 2.48 

Gearcase 

B D QF QE PB2 DB JB JA PB1 X QC QB WG P2 

4.72 3.94 1.77 1.38 2.99 0.37 1.57 1.42 4.92 0.16 2.95 4.27 2.24 2.95 

Motor 

CA38 Weight [lb] 

Motor C CB P AB AA CA38 

LA71 17.40 19.57 5.47 5.75 1/2" + 3/4" 44 

LA71Z 18.15 20.31 5.47 5.75 1/2" + 3/4" 44 

LA80 18.86 21.36 6.16 6.10 1/2" + 3/4" 55 

LA90S 20.08 22.87 6.85 6.42 1/2" + 3/4" 66 

LA90Z 21.85 24.65 6.85 6.42 1/2" + 3/4" 66 

LA100Z 24.65 27.83 7.68 6.61 2 x 3/4” 86 


6 - 62 

B A 

[inch]


Shaft mounted 

Mounting 

E F FA G H 

80 100 35 15 11 


CA38 CA 510 

B A 

Output Shaft 


31,75 45 120 102 90 35 3/8“-16UNC 35,05 6,35 60 44 63 

Gearcase 


120 100 45 35 76 9,5 40 36 125 4 75 108,5 57 75 

Motor 

CA38 Weight [kg] 


LA71 442.0 497.0 139.0 146.0 1/2" + 3/4" 20 

LA71Z 461.0 516.0 139.0 146.0 1/2" + 3/4" 20 

LA80 479.0 542.5 156.5 155.0 1/2" + 3/4" 25 

LA90S 510.0 581.0 174.0 163.0 1/2" + 3/4" 30 

LA90Z 555.0 626.0 174.0 163.0 1/2" + 3/4" 30 

LA100Z 626.0 707.0 195.0 168.0 2 x 3/4" 39 


[mm] 

6 - 63 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





Mounting Torque Arm 

BD AK BB G FN FV GF UGF SB WF Q3 Q5 

4.72 3.15 0.12 0.39 1.26 1.5 0.63 1.77 5.12 2.72 2.52 3.07 

Output Shaft 

U UF VC VG VL VH M BOLT UY Y EA Q1 EB 

1.25 1.772 4.72 4.016 3.54 1.38 3/8-16UNC 1.38 0.25 2.36 2.48 1,732 

Gearcase 

B PB2 DB PB1 X QC QB WG P2 TAP BF 

3.94 2.99 0.37 4.92 0.16 2.95 4.27 2.13 2.91 M8x14 

Motor 



LA71 17.40 19.57 5.47 5.75 1/2" + 3/4" 51 

LA71Z 18.15 20.31 5.47 5.75 1/2" + 3/4" 51 

LA80 18.86 21.36 6.16 6.10 1/2" + 3/4" 62 

LA90S 20.08 22.87 6.85 6.42 1/2" + 3/4" 71 

LA90Z 21.85 24.65 6.85 6.42 1/2" + 3/4" 71 

LA100Z 24.65 27.83 7.68 6.61 2 x 3/4” 90 


6 - 64 

B A 

[inch]





B A 



120 80 3 10 32 38 16 45 130 69 64 78 

Output Shaft 


31,75 45 120 102 90 35 3/8“-16UNC 35,05 6,35 60 44 63 

Gearcase 

B PB2 DB PB1 X QC QB WG P2 

100 76 9,5 125 4 75 108,5 54 74 

Motor 



LA71 442.0 497.0 139.0 146.0 1/2" + 3/4" 23 

LA71Z 461.0 516.0 139.0 146.0 1/2" + 3/4" 23 

LA80 479.0 542.5 156.5 155.0 1/2" + 3/4" 28 

LA90S 510.0 581.0 174.0 163.0 1/2" + 3/4" 32 

LA90Z 555.0 626.0 174.0 163.0 1/2" + 3/4" 32 

LA100Z 626.0 707.0 195.0 168.0 2 x 3/4" 41 


[mm] 

6 - 65 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CAF38 CAF 510 

Flange 

BD AK GA AJ BB Q3 BF 

6.3 4.33 0.39 5.12 0.14 3.31 0.35 

Output Shaft 


1.25 1.772 4.72 4.016 3.54 1.38 3/8-16UNC 1.38 0.25 2.36 1.732 2.48 

Gearcase 

E FA FJA FJB F G B D PB2 DB JB JA PB1 X QC QB WG P2 TAP H 

4.61 2.5 1.38 1.52 2.36 0.39 3.94 3.94 2.99 0.37 1.18 1.46 4.92 0.16 2.95 4.27 2.24 2.91 M10x17 

Motor 



LA71 17.40 19.57 5.47 5.75 1/2" + 3/4" 51 

LA71Z 18.15 20.31 5.47 5.75 1/2" + 3/4" 51 

LA80 18.86 21.36 6.16 6.10 1/2" + 3/4" 62 

LA90S 20.08 22.87 6.85 6.42 1/2" + 3/4" 71 

LA90Z 21.85 24.65 6.85 6.42 1/2" + 3/4" 71 

LA100Z 24.65 27.83 7.68 6.61 2 x 3/4” 90 


6 - 66 

B A 

[inch]



Flange 


160 110 10 130 3,5 84 9 


CAF38 CAF 510 

B A 

Output Shaft 


31,75 45 120 102 90 35 3/8“-16UNC 35,05 6,35 60 44 63 

Gearcase 


117 63,5 35 38,5 60 10 100 100 76 9,5 30 37 125 4 75 108,5 57 74 M10x17 

Motor 



LA71 442.0 497.0 139.0 146.0 1/2" + 3/4" 23 

LA71Z 461.0 516.0 139.0 146.0 1/2" + 3/4" 23 

LA80 479.0 542.5 156.5 155.0 1/2" + 3/4" 28 

LA90S 510.0 581.0 174.0 163.0 1/2" + 3/4" 32 

LA90Z 555.0 626.0 174.0 163.0 1/2" + 3/4" 32 

LA100Z 626.0 707.0 195.0 168.0 2 x 3/4" 41 


[mm] 

6 - 67 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Shaft mounted with housing flange (C-Type) 

CAZ38 CAZ 510 

Mounting 


4.72 3.15 3.94 0.12 M8x14 

Output Shaft 


1.25 1.772 4.72 4.016 3.54 1.38 3/8-16UNC 1.38 0.25 2.36 1.732 2.48 

Gearcase 


4.61 2.5 1.38 1.52 2.36 0.39 3.94 3.94 2.99 0.37 1.18 1.46 4.92 0.16 2.95 4.27 2.13 2.91 M10x17 

Motor 

CAZ38 Weight [lb] 

Motor C CB P AB AA CAZ38 

LA71 17.40 19.57 5.47 5.75 1/2" + 3/4" 49 

LA71Z 18.15 20.31 5.47 5.75 1/2" + 3/4" 49 

LA80 18.86 21.36 6.16 6.10 1/2" + 3/4" 60 

LA90S 20.08 22.87 6.85 6.42 1/2" + 3/4" 71 

LA90Z 21.85 24.65 6.85 6.42 1/2" + 3/4" 71 

LA100Z 24.65 27.83 7.68 6.61 2 x 3/4” 90 


6 - 68 

B A 

[inch]



Mounting 


120 80 100 3 M8x14 


CAZ38 CAZ 510 

B A 

Output Shaft 


31,75 45 120 102 90 35 3/8“-16UNC 35,05 6,35 60 44 63 

Gearcase 


117 63,5 35 38,5 60 10 100 100 76 9,5 30 37 125 4 75 108,5 54 74 M10x17 

Motor 

CAZ38 Weight [kg] 


LA71 442.0 497.0 139.0 146.0 1/2" + 3/4" 22 

LA71Z 461.0 516.0 139.0 146.0 1/2" + 3/4" 22 

LA80 479.0 542.5 156.5 155.0 1/2" + 3/4" 27 

LA90S 510.0 581.0 174.0 163.0 1/2" + 3/4" 32 

LA90Z 555.0 626.0 174.0 163.0 1/2" + 3/4" 32 

LA100Z 626.0 707.0 195.0 168.0 2 x 3/4" 41 


[mm] 

6 - 69 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Foot mounted 

C48 C 510 

Mounting 

E F FA G TAP H 

3.94 4.33 1.77 0.59 0.43 

Output Shaft 


1.25 2.36 1.875 0.133 1.36 0.25 3.15 3/8-16UNC 

Gearcase 


5.35 4.41 2.17 1.77 2.99 0.85 1.77 1.57 4.92 0.16 3.15 4.76 2.8 3.15 5.31 

Motor 



LA71 18.09 20.26 5.47 5.75 1/2" + 3/4" 66 

LA71Z 18.84 21.00 5.47 5.75 1/2" + 3/4" 66 

LA80 19.55 22.05 6.16 6.10 1/2" + 3/4" 75 

LA90S 20.77 23.56 6.85 6.42 1/2" + 3/4" 86 

LA90Z 22.54 25.33 6.85 6.42 1/2" + 3/4" 86 

LA100Z 25.33 28.52 7.68 6.61 2 x 3/4" 106 

LA112Z 24.84 28.03 8.62 7.13 2 x 3/4" 130 


6 - 70 

B A 

[inch]


Foot mounted 

Mounting 

E F FA G H 

100 110 45 15 11 

Output Shaft 


31,75 60 47,625 3,378 34,54 6,35 80 3/8“-16UNC 


C48 C 510 

B A 

Gearcase 


136 112 55 45 76 21,5 45 40 125 4 80 121 71 80 135 

Motor 



LA71 459.5 514.5 139.0 146.0 1/2" + 3/4" 30 

LA71Z 478.5 533.5 139.0 146.0 1/2" + 3/4" 30 

LA80 496.5 560.0 156.5 155.0 1/2" + 3/4" 34 

LA90S 527.5 598.5 174.0 163.0 1/2" + 3/4" 39 

LA90Z 572.5 643.5 174.0 163.0 1/2" + 3/4" 39 

LA100Z 643.5 724.5 195.0 168.0 2 x 3/4" 48 

LA112Z 631 712 219 181 2 x 3/4" 59 


[mm] 

6 - 71 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CF48 CF 510 

Flange 


7.87 5.12 0.47 6.5 0.14 0.43 

Output Shaft 


1.25 2.36 1.875 0.133 1.36 0.25 2.36 3/8-16UNC 

Gearcase 


4.61 2.3 1.59 1.59 2.87 0.47 4.33 4.41 2.99 0.85 1.3 1.44 4.92 0.16 3.15 4.76 2.8 3.11 6.3 M10x17 

Motor 



LA71 18.09 20.26 5.47 5.75 1/2" + 3/4" 75 

LA71Z 18.84 21.00 5.47 5.75 1/2" + 3/4" 75 

LA80 19.55 22.05 6.16 6.10 1/2" + 3/4" 86 

LA90S 20.77 23.56 6.85 6.42 1/2" + 3/4" 95 

LA90Z 22.54 25.33 6.85 6.42 1/2" + 3/4" 95 

LA100Z 25.33 28.52 7.68 6.61 2 x 3/4" 115 

LA112Z 24.84 28.03 8.62 7.13 2 x 3/4" 139 


6 - 72 

A 

[inch]



Flange 


200 130 12 165 3,5 11 

Output Shaft 


31,75 60 47,625 3,378 34,54 6,35 60 3/8“-16UNC 


CF48 CF 510 

Gearcase 


117 58,5 40,5 40,5 73 12 110 112 76 21,5 33 36,5 125 4 80 121 71 79 160 M10x17 

Motor 



LA71 459.5 514.5 139.0 146.0 1/2" + 3/4" 34 

LA71Z 478.5 533.5 139.0 146.0 1/2" + 3/4" 34 

LA80 496.5 560.0 156.5 155.0 1/2" + 3/4" 39 

LA90S 527.5 598.5 174.0 163.0 1/2" + 3/4" 43 

LA90Z 572.5 643.5 174.0 163.0 1/2" + 3/4" 43 

LA100Z 643.5 724.5 195.0 168.0 2 x 3/4" 52 

LA112Z 631 712 219 181 2 x 3/4" 63 


A 

[mm] 

6 - 73 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Shaft mounted 

CA48 CA 510 

Mounting 

E F FA G H 

3.94 4.33 1.77 0.59 0.43 

Output Shaft 


1.375 2.165 5.91 5.039 4.53 1.37 3/8-16UNC 1.53 0.31 2.95 2.283 3.07 

Gearcase 


5.35 4.41 2.17 1.77 2.99 0.85 1.77 1.57 4.92 0.16 3.15 4.76 2.8 3.15 

Motor 



LA71 18.09 20.26 5.47 5.75 1/2" + 3/4" 62 

LA71Z 18.84 21.00 5.47 5.75 1/2" + 3/4" 62 

LA80 19.55 22.05 6.16 6.10 1/2" + 3/4" 73 

LA90S 20.77 23.56 6.85 6.42 1/2" + 3/4" 84 

LA90Z 22.54 25.33 6.85 6.42 1/2" + 3/4" 84 

LA100Z 25.33 28.52 7.68 6.61 2 x 3/4" 104 

LA112Z 24.84 28.03 8.62 7.13 2 x 3/4" 126 


6 - 74 

B A 

[inch]


Shaft mounted 

Mounting 

E F FA G H 

100 110 45 15 11 


CA48 CA 510 

B A 

Output Shaft 


34,93 55 150 128 115 35 3/8“-16UNC 38,86 7,874 75 58 78 

Gearcase 


136 112 55 45 76 21,5 45 40 125 4 80 121 71 80 

Motor 



LA71 459.5 514.5 139.0 146.0 1/2" + 3/4" 28 

LA71Z 478.5 533.5 139.0 146.0 1/2" + 3/4" 28 

LA80 496.5 560.0 156.5 155.0 1/2" + 3/4" 33 

LA90S 527.5 598.5 174.0 163.0 1/2" + 3/4" 38 

LA90Z 572.5 643.5 174.0 163.0 1/2" + 3/4" 38 

LA100Z 643.5 724.5 195.0 168.0 2 x 3/4" 47 

LA112Z 631 712 219 181 2 x 3/4" 57 


[mm] 

6 - 75 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 







5.2 3.74 0.12 0.47 1.26 1.5 0.63 1.97 6.3 3.43 3.15 3.56 

Output Shaft 


1.375 2.165 5.91 5.039 4.53 1.37 3/8-16UNC 1.53 0.31 2.95 2.283 3.07 

Gearcase 


4.33 2.99 0.85 4.92 0.16 3.15 4.76 2.68 3.11 

Motor 



LA71 18.09 20.26 5.47 5.75 1/2" + 3/4" 68 

LA71Z 18.84 21.00 5.47 5.75 1/2" + 3/4" 68 

LA80 19.55 22.05 6.16 6.10 1/2" + 3/4" 79 

LA90S 20.77 23.56 6.85 6.42 1/2" + 3/4" 88 

LA90Z 22.54 25.33 6.85 6.42 1/2" + 3/4" 88 

LA100Z 25.33 28.52 7.68 6.61 2 x 3/4" 108 

LA112Z 24.84 28.03 8.62 7.13 2 x 3/4" 132 


6 - 76 

B A 

[inch]







132 95 3 12 32 38 16 50 160 87 80 90,5 

Output Shaft 


34,93 55 150 128 115 35 3/8“-16UNC 38,86 7,874 75 58 78 

Gearcase 


110 76 21,5 125 4 80 121 68 79 

Motor 



LA71 459.5 514.5 139.0 146.0 1/2" + 3/4" 31 

LA71Z 478.5 533.5 139.0 146.0 1/2" + 3/4" 31 

LA80 496.5 560.0 156.5 155.0 1/2" + 3/4" 36 

LA90S 527.5 598.5 174.0 163.0 1/2" + 3/4" 40 

LA90Z 572.5 643.5 174.0 163.0 1/2" + 3/4" 40 

LA100Z 643.5 724.5 195.0 168.0 2 x 3/4" 49 

LA112Z 631 712 219 181 2 x 3/4" 60 


[mm] 

6 - 77 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CAF48 CAF 510 

Mounting 


7.87 5.12 0.47 6.5 0.14 3.94 0.43 

Output Shaft 


1.375 2.165 5.91 5.039 4.53 1.37 3/8-16UNC 1.53 0.31 2.95 2.283 3.07 

Gearcase 


4.61 2.3 1.59 1.59 2.87 0.47 4.33 4.41 2.99 0.85 1.3 1.44 4.92 0.16 3.15 4.76 2.8 3.11 M10x17 

Motor 



LA71 18.09 20.26 5.47 5.75 1/2" + 3/4" 71 

LA71Z 18.84 21.00 5.47 5.75 1/2" + 3/4" 71 

LA80 19.55 22.05 6.16 6.10 1/2" + 3/4" 82 

LA90S 20.77 23.56 6.85 6.42 1/2" + 3/4" 93 

LA90Z 22.54 25.33 6.85 6.42 1/2" + 3/4" 93 

LA100Z 25.33 28.52 7.68 6.61 2 x 3/4" 112 

LA112Z 24.84 28.03 8.62 7.13 2 x 3/4" 135 


6 - 78 

B A 

[inch]



Mounting 


200 130 12 165 3,5 100 11 


CAF48 CAF 510 

B A 

Output Shaft 


34,93 55 150 128 115 35 3/8“-16UNC 38,86 7,874 75 58 78 

Gearcase 


117 58,5 40,5 40,5 73 12 110 112 76 21,5 33 36,5 125 4 80 121 71 79 M10x17 

Motor 



LA71 459.5 514.5 139.0 146.0 1/2" + 3/4" 32 

LA71Z 478.5 533.5 139.0 146.0 1/2" + 3/4" 32 

LA80 496.5 560.0 156.5 155.0 1/2" + 3/4" 37 

LA90S 527.5 598.5 174.0 163.0 1/2" + 3/4" 42 

LA90Z 572.5 643.5 174.0 163.0 1/2" + 3/4" 42 

LA100Z 643.5 724.5 195.0 168.0 2 x 3/4" 51 

LA112Z 631 712 219 181 2 x 3/4" 61 


[mm] 

6 - 79 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CAZ48 CAZ 510 

Mounting 


5.2 3.74 4.53 0.12 M10x17 

Output Shaft 


1.375 2.165 5.91 5.039 4.53 1.37 3/8-16UNC 1.53 0.31 2.95 2.283 3.07 

Gearcase 


4.61 2.3 1.59 1.59 2.87 0.47 4.33 4.41 2.99 0.85 1.3 1.44 4.92 0.16 3.15 4.76 2.68 3.11 M10x17 

Motor 



LA71 18.09 20.26 5.47 5.75 1/2" + 3/4" 66 

LA71Z 18.84 21.00 5.47 5.75 1/2" + 3/4" 66 

LA80 19.55 22.05 6.16 6.10 1/2" + 3/4" 75 

LA90S 20.77 23.56 6.85 6.42 1/2" + 3/4" 86 

LA90Z 22.54 25.33 6.85 6.42 1/2" + 3/4" 86 

LA100Z 25.33 28.52 7.68 6.61 2 x 3/4" 106 

LA112Z 24.84 28.03 8.62 7.13 2 x 3/4" 130 


6 - 80 

B A 

[inch]



Mounting 


132 95 115 3 M10x17 


CAZ48 CAZ 510 

B A 

Output Shaft 


34,93 55 150 128 115 35 3/8“-16UNC 38,86 7,874 75 58 78 

Gearcase 


117 58,5 40,5 40,5 73 12 110 112 76 21,5 33 36,5 125 4 80 121 68 79 M10x17 

Motor 



LA71 459.5 514.5 139.0 146.0 1/2" + 3/4" 30 

LA71Z 478.5 533.5 139.0 146.0 1/2" + 3/4" 30 

LA80 496.5 560.0 156.5 155.0 1/2" + 3/4" 34 

LA90S 527.5 598.5 174.0 163.0 1/2" + 3/4" 39 

LA90Z 572.5 643.5 174.0 163.0 1/2" + 3/4" 39 

LA100Z 643.5 724.5 195.0 168.0 2 x 3/4" 48 

LA112Z 631 712 219 181 2 x 3/4" 59 


[mm] 

6 - 81 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Foot mounted 

C68 C 510 


E F FA G H U V V3 VO UY Y BA TAP M 

5.12 5.12 2.36 0.71 0.53 1.625 3.15 2.75 0.065 1.79 0.375 4.13 5/8-11UNC 

Gearcase 

B D QF QE PB2 DB JB JA PB1 X QC QB WG P2 P3 EA 

6.3 5.51 2.76 2.36 3.74 1.22 2.24 2.01 6.3 0.16 4.17 5.71 3.39 4.17 5.91 6.69 

Motor 



LA71 19.84 22.01 139.0 146.0 1/2" + 3/4" 101 

LA71Z 20.59 22.76 139.0 146.0 1/2" + 3/4" 101 

LA80 21.30 23.80 156.5 155.0 1/2" + 3/4" 112 

LA90S 22.52 25.31 174.0 163.0 1/2" + 3/4" 123 

LA90Z 24.29 27.09 174.0 163.0 1/2" + 3/4" 123 

LA100Z 27.09 30.28 195.0 168.0 2 x 3/4" 143 

LA112Z 26.57 29.76 219.0 181.0 2 x 3/4" 168 

LA132SP 27.91 31.93 259.0 195.0 1" + 3/4" 190 

LA132ZMP 29.72 33.74 259.0 195.0 1" + 3/4" 209 


6 - 82 

B A 

[inch]


Foot mounted 


C68 C 510 

B A 



130 130 60 18 13,5 41,275 80 69,85 1,651 45,47 9,525 105 5/8“-11UNC 

Gearcase 


160 140 70 60 95 31 57 51 160 4 106 145 86 106 150 170 

Motor 



LA71 504.0 559.0 139.0 146.0 1/2" + 3/4" 46 

LA71Z 523.0 578.0 139.0 146.0 1/2" + 3/4" 46 

LA80 541.0 604.5 156.5 155.0 1/2" + 3/4" 51 

LA90S 572.0 643.0 174.0 163.0 1/2" + 3/4" 56 

LA90Z 617.0 688.0 174.0 163.0 1/2" + 3/4" 56 

LA100Z 688.0 769.0 195.0 168.0 2 x 3/4" 65 

LA112Z 675.0 756.0 219.0 181.0 2 x 3/4" 76 

LA132SP 709.0 811.0 259.0 195.0 1" + 3/4" 86 

LA132ZMP 755.0 857.0 259.0 195.0 1" + 3/4" 95 


[mm] 

6 - 83 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CF68 CF 510 



9.84 7.09 0.59 8.46 0.16 0.53 1.625 3.15 2.75 0.065 1.79 0.375 3.15 5/8-11UNC 

Gearcase 

E FA FJA FJB F G B D PB2 DB JB JA PB1 X QC QB WG P2 P3 EA TAP H 

5.98 2.99 2.09 2.09 3.46 0.47 5.51 5.51 3.74 1.22 1.5 1.5 6.3 0.16 4.21 5.71 3.39 4.13 5.83 7.6 M12x21 

Motor 



LA71 19.88 22.05 139.0 146.0 1/2" + 3/4" 121 

LA71Z 20.63 22.80 139.0 146.0 1/2" + 3/4" 121 

LA80 21.34 23.84 156.5 155.0 1/2" + 3/4" 132 

LA90S 22.56 25.35 174.0 163.0 1/2" + 3/4" 143 

LA90Z 24.33 27.13 174.0 163.0 1/2" + 3/4" 143 

LA100Z 27.13 30.31 195.0 168.0 2 x 3/4" 163 

LA112Z 26.61 29.80 219.0 181.0 2 x 3/4" 187 

LA132SP 27.95 31.97 259.0 195.0 1" + 3/4" 209 

LA132ZMP 29.76 33.78 259.0 195.0 1" + 3/4" 229 


6 - 84 

A 

[inch]




CF68 CF 510 



250 180 15 215 4 13,5 41,275 80 69,85 1,651 45,47 9,525 80 5/8“-11UNC 

Gearcase 


152 76 53 53 88 12 140 140 95 31 38 38 160 4 107 145 86 105 148 193 M12x21 

Motor 



LA71 505.0 560.0 139.0 146.0 1/2" + 3/4" 55 

LA71Z 524.0 579.0 139.0 146.0 1/2" + 3/4" 55 

LA80 542.0 605.5 156.5 155.0 1/2" + 3/4" 60 

LA90S 573.0 644.0 174.0 163.0 1/2" + 3/4" 65 

LA90Z 618.0 689.0 174.0 163.0 1/2" + 3/4" 65 

LA100Z 689.0 770.0 195.0 168.0 2 x 3/4" 74 

LA112Z 676.0 757.0 219.0 181.0 2 x 3/4" 85 

LA132SP 710.0 812.0 259.0 195.0 1" + 3/4" 95 

LA132ZMP 756.0 858.0 259.0 195.0 1" + 3/4" 104 


A 

[mm] 

6 - 85 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Shaft mounted 

CA68 CA 510 

Mounting 

E F FA G H 

5.12 5.12 2.36 0.71 0.53 

Output Shaft 


1.5 2.559 7.09 5.906 5.31 1.93 5/8-11UNC 1.68 0.38 3.54 2.717 3.66 

Gearcase 

B D QF QE PB2 DB JB JA PB1 X QC QB WG P2 P3 

6.3 5.51 2.76 2.36 3.74 1.22 2.24 2.01 6.3 0.16 4.17 5.71 3.39 4.17 5.91 

Motor 



LA71 19.84 22.01 139.0 146.0 1/2" + 3/4" 95 

LA71Z 20.59 22.76 139.0 146.0 1/2" + 3/4" 95 

LA80 21.30 23.80 156.5 155.0 1/2" + 3/4" 106 

LA90S 22.52 25.31 174.0 163.0 1/2" + 3/4" 115 

LA90Z 24.29 27.09 174.0 163.0 1/2" + 3/4" 115 

LA100Z 27.09 30.28 195.0 168.0 2 x 3/4" 135 

LA112Z 26.57 29.76 219.0 181.0 2 x 3/4" 161 

LA132SP 27.91 31.93 259.0 195.0 1" + 3/4" 183 

LA132ZMP 29.72 33.74 259.0 195.0 1" + 3/4" 203 


6 - 86 

B A 

[inch]


Shaft mounted 

Mounting 

E F FA G H 

130 130 60 18 13,5 


CA68 CA 510 

B A 

Output Shaft 


38,1 65 180 150 135 49 5/8“-11UNC 42,67 9,652 90 69 93 

Gearcase 


160 140 70 60 95 31 57 51 160 4 106 145 86 106 150 

Motor 



LA71 504.0 559.0 139.0 146.0 1/2" + 3/4" 43 

LA71Z 523.0 578.0 139.0 146.0 1/2" + 3/4" 43 

LA80 541.0 604.5 156.5 155.0 1/2" + 3/4" 48 

LA90S 572.0 643.0 174.0 163.0 1/2" + 3/4" 52 

LA90Z 617.0 688.0 174.0 163.0 1/2" + 3/4" 52 

LA100Z 688.0 769.0 195.0 168.0 2 x 3/4" 61 

LA112Z 675.0 756.0 219.0 181.0 2 x 3/4" 73 

LA132SP 709.0 811.0 259.0 195.0 1" + 3/4" 83 

LA132ZMP 755.0 857.0 259.0 195.0 1" + 3/4" 92 


[mm] 

6 - 87 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 







5.91 4.33 0.14 0.47 1.57 1.81 0.98 2.36 7.87 4.17 3.84 4.19 

Output Shaft 


1.5 2.559 7.09 5.906 5.31 1.93 5/8-11UNC 1.68 0.38 3.54 2.717 3.66 

Gearcase 

B PB2 DB PB1 X QC QB WG P2 P3 

5.51 3.74 1.22 6.3 0.16 4.21 5.71 3.25 4.13 5.83 

Motor 



LA71 19.88 22.05 139.0 146.0 1/2" + 3/4" 106 

LA71Z 20.63 22.80 139.0 146.0 1/2" + 3/4" 106 

LA80 21.34 23.84 156.5 155.0 1/2" + 3/4" 117 

LA90S 22.56 25.35 174.0 163.0 1/2" + 3/4" 126 

LA90Z 24.33 27.13 174.0 163.0 1/2" + 3/4" 126 

LA100Z 27.13 30.31 195.0 168.0 2 x 3/4" 148 

LA112Z 26.61 29.80 219.0 181.0 2 x 3/4" 172 

LA132SP 27.95 31.97 259.0 195.0 1" + 3/4" 194 

LA132ZMP 29.76 33.78 259.0 195.0 1" + 3/4" 214 


6 - 88 

B A 

[inch]





B A 


AK BB BD G FN FV GF UGF SB WF Q3 Q5 

110 3,5 150 12 40 46 25 60 200 106 97,5 106,5 

Output Shaft 


38,1 65 180 150 135 49 5/8“-11UNC 42,67 9,652 90 69 93 

Gearcase 


140 95 31 160 4 107 145 82,5 105 148 

Motor 



LA71 505.0 560.0 139.0 146.0 1/2" + 3/4" 48 

LA71Z 524.0 579.0 139.0 146.0 1/2" + 3/4" 48 

LA80 542.0 605.5 156.5 155.0 1/2" + 3/4" 53 

LA90S 573.0 644.0 174.0 163.0 1/2" + 3/4" 57 

LA90Z 618.0 689.0 174.0 163.0 1/2" + 3/4" 57 

LA100Z 689.0 770.0 195.0 168.0 2 x 3/4" 67 

LA112Z 676.0 757.0 219.0 181.0 2 x 3/4" 78 

LA132SP 710.0 812.0 259.0 195.0 1" + 3/4" 88 

LA132ZMP 756.0 858.0 259.0 195.0 1" + 3/4" 97 


[mm] 

6 - 89 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CAF68 CAF 510 

Mounting 


7.87 5.12 0.47 6.5 0.16 5.22 0.43 

9.84 7.09 0.59 8.46 0.16 4.45 0.53 

Output Shaft 


1.5 2.559 7.09 5.906 5.31 1.93 5/8-11UNC 1.68 0.38 3.54 2.717 3.66 

Gearcase 

E FA FJA FJB F G B D PB2 DB JB JA PB1 X QC QB WG P2 P3 TAP H 

5.98 2.99 2.09 2.09 3.46 0.47 5.51 5.51 3.74 1.22 1.5 1.5 6.3 0.16 4.21 5.71 3.39 4.13 5.83 M12x21 

Motor 



LA71 19.88 22.05 139.0 146.0 1/2" + 3/4" 115 

LA71Z 20.63 22.80 139.0 146.0 1/2" + 3/4" 115 

LA80 21.34 23.84 156.5 155.0 1/2" + 3/4" 126 

LA90S 22.56 25.35 174.0 163.0 1/2" + 3/4" 135 

LA90Z 24.33 27.13 174.0 163.0 1/2" + 3/4" 135 

LA100Z 27.13 30.31 195.0 168.0 2 x 3/4" 154 

LA112Z 26.61 29.80 219.0 181.0 2 x 3/4" 181 

LA132SP 27.95 31.97 259.0 195.0 1" + 3/4" 203 

LA132ZMP 29.76 33.78 259.0 195.0 1" + 3/4" 223 


6 - 90 

B A 

[inch]



Mounting 


200 130 12 165 4 132,5 11 

250 180 15 215 4 113 13,5 


CAF68 CAF 510 

B A 

Output Shaft 


38,1 65 180 150 135 49 5/8“-11UNC 42,67 9,652 90 69 93 

Gearcase 


152 76 53 53 88 12 140 140 95 31 38 38 160 4 107 145 86 105 148 M12x21 

Motor 



LA71 505.0 560.0 139.0 146.0 1/2" + 3/4" 52 

LA71Z 524.0 579.0 139.0 146.0 1/2" + 3/4" 52 

LA80 542.0 605.5 156.5 155.0 1/2" + 3/4" 57 

LA90S 573.0 644.0 174.0 163.0 1/2" + 3/4" 61 

LA90Z 618.0 689.0 174.0 163.0 1/2" + 3/4" 61 

LA100Z 689.0 770.0 195.0 168.0 2 x 3/4" 70 

LA112Z 676.0 757.0 219.0 181.0 2 x 3/4" 82 

LA132SP 710.0 812.0 259.0 195.0 1" + 3/4" 92 

LA132ZMP 756.0 858.0 259.0 195.0 1" + 3/4" 101 


[mm] 

6 - 91 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CAZ68 CAZ 510 

Mounting 


5.91 4.33 5.12 0.14 M12x21 

Output Shaft 


1.5 2.559 7.09 5.906 5.31 1.93 5/8-11UNC 1.68 0.38 3.54 2.717 3.66 

Gearcase 


5.98 2.99 2.09 2.09 3.46 0.47 5.51 5.51 3.74 1.22 1.5 1.5 6.3 0.16 4.21 5.71 3.25 4.13 5.83 M12x21 

Motor 



LA71 19.88 22.05 139.0 146.0 1/2" + 3/4" 104 

LA71Z 20.63 22.80 139.0 146.0 1/2" + 3/4" 104 

LA80 21.34 23.84 156.5 155.0 1/2" + 3/4" 115 

LA90S 22.56 25.35 174.0 163.0 1/2" + 3/4" 126 

LA90Z 24.33 27.13 174.0 163.0 1/2" + 3/4" 126 

LA100Z 27.13 30.31 195.0 168.0 2 x 3/4" 146 

LA112Z 26.61 29.80 219.0 181.0 2 x 3/4" 170 

LA132SP 27.95 31.97 259.0 195.0 1" + 3/4" 192 

LA132ZMP 29.76 33.78 259.0 195.0 1" + 3/4" 212 


6 - 92 

B A 

[inch]



Mounting 


150 110 130 3,5 M12x21 


CAZ68 CAZ 510 

B A 

Output Shaft 


38,1 65 180 150 135 49 5/8“-11UNC 42,67 9,652 90 69 93 

Gearcase 


152 76 53 53 88 12 140 140 95 31 38 38 160 4 107 145 82,5 105 148 M12x21 

Motor 



LA71 505.0 560.0 139.0 146.0 1/2" + 3/4" 47 

LA71Z 524.0 579.0 139.0 146.0 1/2" + 3/4" 47 

LA80 542.0 605.5 156.5 155.0 1/2" + 3/4" 52 

LA90S 573.0 644.0 174.0 163.0 1/2" + 3/4" 57 

LA90Z 618.0 689.0 174.0 163.0 1/2" + 3/4" 57 

LA100Z 689.0 770.0 195.0 168.0 2 x 3/4" 66 

LA112Z 676.0 757.0 219.0 181.0 2 x 3/4" 77 

LA132SP 710.0 812.0 259.0 195.0 1" + 3/4" 87 

LA132ZMP 756.0 858.0 259.0 195.0 1" + 3/4" 96 


[mm] 

6 - 93 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Foot mounted 

C88 C 510 



5.31 5.91 2.95 0.98 0.69 2 3.94 3.5 0.004 2.22 0.5 5.12 3/4-10UNC 

Gearcase 


7.28 7.09 2.36 2.95 4.69 1.59 2.72 2.44 7.87 0.04 4.92 6.24 3.94 4.92 6.97 8.07 

Motor 



LA71 20.89 23.05 5.47 5.75 1/2" + 3/4" 163 

LA71Z 21.63 23.80 5.47 5.75 1/2" + 3/4" 163 

LA80 22.34 24.84 6.16 6.10 1/2" + 3/4" 172 

LA90S 23.56 26.36 6.85 6.42 1/2" + 3/4" 183 

LA90Z 25.33 28.13 6.85 6.42 1/2" + 3/4" 183 

LA100Z 28.13 31.32 7.68 6.61 2 x 3/4" 203 

LA112Z 27.54 30.73 8.62 7.13 2 x 3/4" 229 

LA132SP 28.80 32.81 10.20 7.68 1" + 3/4" 258 

LA132ZMP 30.61 34.63 10.20 7.68 1" + 3/4" 278 

LA160MP 32.83 37.50 12.34 8.94 1" + 3/4" 331 

LA160ZLP 34.72 39.39 12.34 8.94 1" + 3/4" 331 


6 - 94 

B A 

[inch]


Foot mounted 


C88 C 510 

B A 



135 150 75 25 17,5 50,8 100 88,9 0,102 56,39 12,7 130 3/4“-10UNC 

Gearcase 


185 180 60 75 119 40,5 69 62 200 1 125 158,5 100 125 177 205 

Motor 



LA71 530.5 585.5 139.0 146.0 1/2" + 3/4" 74 

LA71Z 549.5 604.5 139.0 146.0 1/2" + 3/4" 74 

LA80 567.5 631.0 156.5 155.0 1/2" + 3/4" 78 

LA90S 598.5 669.5 174.0 163.0 1/2" + 3/4" 83 

LA90Z 643.5 714.5 174.0 163.0 1/2" + 3/4" 83 

LA100Z 714.5 795.5 195.0 168.0 2 x 3/4" 92 

LA112Z 699.5 780.5 219.0 181.0 2 x 3/4" 104 

LA132SP 731.5 833.5 259.0 195.0 1" + 3/4" 117 

LA132ZMP 777.5 879.5 259.0 195.0 1" + 3/4" 126 

LA160MP 834.0 952.5 313.5 227.0 1" + 3/4" 150 

LA160ZLP 882.0 1000.5 313.5 227.0 1" + 3/4" 150 


[mm] 

6 - 95 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CF88 CF 510 



11.81 9.06 0.63 10.43 0.16 0.53 2 3.94 3.5 0.004 2.22 0.5 3.94 3/4-10UNC 

Gearca3se 


6.69 3.35 2.13 2.13 4.53 0.79 6.69 7.09 4.69 1.59 2.01 2.01 7.87 0.04 4.92 6.24 3.94 4.8 6.81 9.53 M16x36 

Motor 



LA71 20.89 23.05 5.47 5.75 1/2" + 3/4" 192 

LA71Z 21.63 23.80 5.47 5.75 1/2" + 3/4" 192 

LA80 22.34 24.84 6.16 6.10 1/2" + 3/4" 203 

LA90S 23.56 26.36 6.85 6.42 1/2" + 3/4" 214 

LA90Z 25.33 28.13 6.85 6.42 1/2" + 3/4" 214 

LA100Z 28.13 31.32 7.68 6.61 2 x 3/4" 234 

LA112Z 27.54 30.73 8.62 7.13 2 x 3/4" 260 

LA132SP 28.80 32.81 10.20 7.68 1" + 3/4" 289 

LA132ZMP 30.61 34.63 10.20 7.68 1" + 3/4" 309 

LA160MP 32.83 37.50 12.34 8.94 1" + 3/4" 362 

LA160ZLP 34.72 39.39 12.34 8.94 1" + 3/4" 362 


6 - 96 

A 

[inch]




CF88 CF 510 



300 230 16 265 4 13,5 50,8 100 88,9 0,102 56,39 12,7 100 3/4“-10UNC 

Gearcase 


170 85 54 54 115 20 170 180 119 40,5 51 51 200 1 125 158,5 100 122 173 242 M16x36 

Motor 



LA71 530.5 585.5 139.0 146.0 1/2" + 3/4" 87 

LA71Z 549.5 604.5 139.0 146.0 1/2" + 3/4" 87 

LA80 567.5 631.0 156.5 155.0 1/2" + 3/4" 92 

LA90S 598.5 669.5 174.0 163.0 1/2" + 3/4" 97 

LA90Z 643.5 714.5 174.0 163.0 1/2" + 3/4" 97 

LA100Z 714.5 795.5 195.0 168.0 2 x 3/4" 106 

LA112Z 699.5 780.5 219.0 181.0 2 x 3/4" 118 

LA132SP 731.5 833.5 259.0 195.0 1" + 3/4" 131 

LA132ZMP 777.5 879.5 259.0 195.0 1" + 3/4" 140 

LA160MP 834.0 952.5 313.5 227.0 1" + 3/4" 164 

LA160ZLP 882.0 1000.5 313.5 227.0 1" + 3/4" 164 


A 

[mm] 

6 - 97 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Shaft mounted 

CA88 CA 510 

Mounting 

E F FA G H 

5.31 5.91 2.95 0.98 0.69 

Output Shaft 


2 3.15 8.27 7.087 6.5 1.62 3/4-10UNC 2.23 0.5 4.13 3.071 4.25 

Gearcase 


7.28 7.09 2.36 2.95 4.69 1.59 2.72 2.44 7.87 0.04 4.92 6.24 3.94 4.92 6.97 



LA71 20.89 23.05 5.47 5.75 1/2" + 3/4" 143 

LA71Z 21.63 23.80 5.47 5.75 1/2" + 3/4" 143 

LA80 22.34 24.84 6.16 6.10 1/2" + 3/4" 154 

LA90S 23.56 26.36 6.85 6.42 1/2" + 3/4" 165 

LA90Z 25.33 28.13 6.85 6.42 1/2" + 3/4" 165 

LA100Z 28.13 31.32 7.68 6.61 2 x 3/4" 185 

LA112Z 27.54 30.73 8.62 7.13 2 x 3/4" 212 

LA132SP 28.80 32.81 10.20 7.68 1" + 3/4" 240 

LA132ZMP 30.61 34.63 10.20 7.68 1" + 3/4" 260 

LA160MP 32.83 37.50 12.34 8.94 1" + 3/4" 313 

LA160ZLP 34.72 39.39 12.34 8.94 1" + 3/4" 313 


6 - 98 

B A 

[inch]


Shaft mounted 

Mounting 

E F FA G H 

135 150 75 25 17,5 


CA88 CA 510 

B A 

Output Shaft 


50,8 80 210 180 165 41 3/4“-10UNC 56,64 12,7 105 78 108 

Gearcase 


185 180 60 75 119 40,5 69 62 200 1 125 158,5 100 125 177 

Motor 



LA71 530.5 585.5 139.0 146.0 1/2" + 3/4" 65 

LA71Z 549.5 604.5 139.0 146.0 1/2" + 3/4" 65 

LA80 567.5 631.0 156.5 155.0 1/2" + 3/4" 70 

LA90S 598.5 669.5 174.0 163.0 1/2" + 3/4" 75 

LA90Z 643.5 714.5 174.0 163.0 1/2" + 3/4" 75 

LA100Z 714.5 795.5 195.0 168.0 2 x 3/4" 84 

LA112Z 699.5 780.5 219.0 181.0 2 x 3/4" 96 

LA132SP 731.5 833.5 259.0 195.0 1" + 3/4" 109 

LA132ZMP 777.5 879.5 259.0 195.0 1" + 3/4" 118 

LA160MP 834.0 952.5 313.5 227.0 1" + 3/4" 142 

LA160ZLP 882.0 1000.5 313.5 227.0 1" + 3/4" 142 


[mm] 

6 - 99 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 







7.48 5.12 0.14 0.79 1.57 1.81 0.98 2.36 9.84 4.72 4.39 5.26 

Output Shaft 


2 3.15 8.27 7.087 6.5 1.62 3/4-10UNC 2.23 0.5 4.13 3.071 4.25 

Gearcase 


6.69 4.69 1.59 7.87 0.04 4.92 6.24 3.8 4.8 6.81 

Motor 



LA71 20.89 23.05 5.47 5.75 1/2" + 3/4" 165 

LA71Z 21.63 23.80 5.47 5.75 1/2" + 3/4" 165 

LA80 22.34 24.84 6.16 6.10 1/2" + 3/4" 176 

LA90S 23.56 26.36 6.85 6.42 1/2" + 3/4" 187 

LA90Z 25.33 28.13 6.85 6.42 1/2" + 3/4" 187 

LA100Z 28.13 31.32 7.68 6.61 2 x 3/4" 207 

LA112Z 27.54 30.73 8.62 7.13 2 x 3/4" 234 

LA132SP 28.80 32.81 10.20 7.68 1" + 3/4" 262 

LA132ZMP 30.61 34.63 10.20 7.68 1" + 3/4" 282 

LA160MP 32.83 37.50 12.34 8.94 1" + 3/4" 333 

LA160ZLP 34.72 39.39 12.34 8.94 1" + 3/4" 333 


6 - 100 

B A 

[inch]





B A 



190 130 3,5 20 40 46 25 60 250 120 111,5 133,5 

Output Shaft 


50,8 80 210 180 165 41 3/4“-10UNC 56,64 12,7 105 78 108 

Gearcase 


170 119 40,5 200 1 125 158,5 96,5 122 173 

Motor 



LA71 530.5 585.5 139.0 146.0 1/2" + 3/4" 75 

LA71Z 549.5 604.5 139.0 146.0 1/2" + 3/4" 75 

LA80 567.5 631.0 156.5 155.0 1/2" + 3/4" 80 

LA90S 598.5 669.5 174.0 163.0 1/2" + 3/4" 85 

LA90Z 643.5 714.5 174.0 163.0 1/2" + 3/4" 85 

LA100Z 714.5 795.5 195.0 168.0 2 x 3/4" 94 

LA112Z 699.5 780.5 219.0 181.0 2 x 3/4" 106 

LA132SP 731.5 833.5 259.0 195.0 1" + 3/4" 119 

LA132ZMP 777.5 879.5 259.0 195.0 1" + 3/4" 128 

LA160MP 834.0 952.5 313.5 227.0 1" + 3/4" 151 

LA160ZLP 882.0 1000.5 313.5 227.0 1" + 3/4" 151 


[mm] 

6 - 101 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CAF88 CAF 510 

Mounting 

BD AK GA AJ BB Q3 TAP BF 

9.84 7.09 0.59 8.46 0.16 5.93 0.53 

11.81 9.06 0.63 10.43 0.16 5.59 0.53 

Output Shaft 


2 3.15 8.27 7.087 6.5 1.62 3/4-10UNC 2.23 0.5 4.13 3.071 4.25 

Gearcase 


6.69 3.35 2.13 2.13 4.53 0.79 6.69 7.09 4.69 1.59 2.01 2.01 7.87 0.04 4.92 6.24 3.94 4.8 6.81 M16x28 

Motor 



LA71 20.89 23.05 5.47 5.75 1/2" + 3/4" 174 

LA71Z 21.63 23.80 5.47 5.75 1/2" + 3/4" 174 

LA80 22.34 24.84 6.16 6.10 1/2" + 3/4" 185 

LA90S 23.56 26.36 6.85 6.42 1/2" + 3/4" 196 

LA90Z 25.33 28.13 6.85 6.42 1/2" + 3/4" 196 

LA100Z 28.13 31.32 7.68 6.61 2 x 3/4" 216 

LA112Z 27.54 30.73 8.62 7.13 2 x 3/4" 243 

LA132SP 28.80 32.81 10.20 7.68 1" + 3/4" 271 

LA132ZMP 30.61 34.63 10.20 7.68 1" + 3/4" 291 

LA160MP 32.83 37.50 12.34 8.94 1" + 3/4" 342 

LA160ZLP 34.72 39.39 12.34 8.94 1" + 3/4" 342 


6 - 102 

B A 

[inch]



Mounting 


250 180 15 215 4 150,5 13,5 

300 230 16 265 4 142 13,5 


CAF88 CAF 510 

B A 

Output Shaft 


50,8 80 210 180 165 41 3/4“-10UNC 56,64 12,7 105 78 108 

Gearcase 


170 85 54 54 115 20 170 180 119 40,5 51 51 200 1 125 158,5 100 122 173 M16x28 

Motor 



LA71 530.5 585.5 139.0 146.0 1/2" + 3/4" 79 

LA71Z 549.5 604.5 139.0 146.0 1/2" + 3/4" 79 

LA80 567.5 631.0 156.5 155.0 1/2" + 3/4" 84 

LA90S 598.5 669.5 174.0 163.0 1/2" + 3/4" 89 

LA90Z 643.5 714.5 174.0 163.0 1/2" + 3/4" 89 

LA100Z 714.5 795.5 195.0 168.0 2 x 3/4" 98 

LA112Z 699.5 780.5 219.0 181.0 2 x 3/4" 110 

LA132SP 731.5 833.5 259.0 195.0 1" + 3/4" 123 

LA132ZMP 777.5 879.5 259.0 195.0 1" + 3/4" 132 

LA160MP 834.0 952.5 313.5 227.0 1" + 3/4" 155 

LA160ZLP 882.0 1000.5 313.5 227.0 1" + 3/4" 155 


[mm] 

6 - 103 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 




CAZ88 CAZ 510 

Mounting 


7.48 5.12 6.5 0.14 M12x21 

Output Shaft 


2 3.15 8.27 7.087 6.5 1.62 3/4-10UNC 2.23 0.5 4.13 3.071 4.25 

Gearcase 

E FA FJA FJB F B D PB2 DB JB JA PB1 X QC QB WG G P2 P3 TAP H 

6.69 3.35 2.13 2.13 4.53 6.69 7.09 4.69 1.59 2.01 2.01 7.87 0.04 4.92 6.24 3.8 0.79 4.8 6.81 M16x28 

Motor 



LA71 20.89 23.05 5.47 5.75 1/2" + 3/4" 159 

LA71Z 21.63 23.80 5.47 5.75 1/2" + 3/4" 159 

LA80 22.34 24.84 6.16 6.10 1/2" + 3/4" 170 

LA90S 23.56 26.36 6.85 6.42 1/2" + 3/4" 181 

LA90Z 25.33 28.13 6.85 6.42 1/2" + 3/4" 181 

LA100Z 28.13 31.32 7.68 6.61 2 x 3/4" 201 

LA112Z 27.54 30.73 8.62 7.13 2 x 3/4" 227 

LA132SP 28.80 32.81 10.20 7.68 1" + 3/4" 256 

LA132ZMP 30.61 34.63 10.20 7.68 1" + 3/4" 276 

LA160MP 32.83 37.50 12.34 8.94 1" + 3/4" 329 

LA160ZLP 34.72 39.39 12.34 8.94 1" + 3/4" 329 


6 - 104 

B A 

[inch]



Mounting 


190 130 165 3.5 M12x21 


CAZ88 CAZ 510 

B A 

Output Shaft 


50,8 80 210 180 165 41 3/4“-10UNC 56.64 12.7 105 78 108 

Gearcase 

E FA FJA FJB F B D PB2 DB JB JA PB1 X QC QB WG G P2 P3 TAP H 

170 85 54 54 115 170 180 119 40.5 51 51 200 1 125 158.5 96.5 20 122 173 M16x28 

Motor 



LA71 530.5 585.5 139.0 146.0 1/2" + 3/4" 72 

LA71Z 549.5 604.5 139.0 146.0 1/2" + 3/4" 72 

LA80 567.5 631.0 156.5 155.0 1/2" + 3/4" 77 

LA90S 598.5 669.5 174.0 163.0 1/2" + 3/4" 82 

LA90Z 643.5 714.5 174.0 163.0 1/2" + 3/4" 82 

LA100Z 714.5 795.5 195.0 168.0 2 x 3/4" 91 

LA112Z 699.5 780.5 219.0 181.0 2 x 3/4" 103 

LA132SP 731.5 833.5 259.0 195.0 1" + 3/4" 116 

LA132ZMP 777.5 879.5 259.0 195.0 1" + 3/4" 125 

LA160MP 834.0 952.5 313.5 227.0 1" + 3/4" 149 

LA160ZLP 882.0 1000.5 313.5 227.0 1" + 3/4" 149 


[mm] 

6 - 105 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



INCH 


[inch] [inch] [inch] [inch] [inch] [inch] 

C/CF28 3/4 0.83 1.57 0.01 3/16 x 3/16 x 1 1/4 1/4 - 20 x 0.63 

C/CF38 * 1 1.11 1.97 0.252 1/4 x 1/4 x 1 1/2 3/8 - 16 x 0.87 

C/CF48 * 1 1/4 1.36 2.36 0.133 1/4 x 1/4 x 1 7/8 3/8 - 16 x 0.87 

C.38 1 3/8 1.51 2.76 0.027 5/16 x 5/16 x 2 3/8 3/8 - 16 x 0.87 

C.48 

1 5/8 1.79 3.15 0.065 3/8 x 3/8 x 2 3/4 5/8 - 11 x 1.42 

C/CF68 * 

C.68 

2 2.22 3.94 0.004 1/2 x 1/2 x 3 1/2 3/4 - 10 x 1.65 

C/CF88 * 

C.88 2 3/4 3.03 5.51 0.671 5/8 x 5/8 x 4 1/4 3/4 - 10 x 1.65 

METRIC 


[mm] [mm] [mm] [mm] [mm] [mm] 

C/CF28 20 22.5 40 4 6 x 6 x 32 M6 x 16 

C/CF38 * 25 28 50 5 8 x 7 x 40 M10 x 22 

C/CF48 * 30 33 60 3.5 8 x 7 x 50 M10 x 22 

C/CF68 * 40 43 80 5 12 x 8 x 70 M16 x 36 

C/CF88 * 50 53.5 100 10 14 x 9 x 80 M16 x 36 

* Second Shaft Extension possible (not for CF). Tolerances see page 1 - 4. Tap specification see page 1 - 7. 

6 - 106

Available Output Hollow Shafts 

INCH 


Size VC EH EB U UF UY Y VG VH M BOLT 

[inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] 

CA.28 

CA.38 

4.72 

4.82 

4.84 

1.58 

1.73 

3/4 

1 1/4 

1.58 

1.77 

0.85 

1.38 

3/16 

1/4 

4.18 

4.02 

1.047 

1.38 

1/2 -13 UNC 

3/8 - 16 UNC 

CA.48 5.91 6.02 2.28 

1 3/8 

1 1/2 

2.17 

1.53 

1.68 

5/16 

3/8 

5.04 

1.37 

1.93 

3/8 - 16 UNC 

CA.68 7.09 7.20 2.72 1 1/2 2.56 1.68 3/8 5.91 1.93 5/8 - 11 UNC 

CA.88 8.27 8.39 3.07 2 3.15 2.23 1/2 7.09 1.62 3/4 - 10 UNC 

METRIC 

Size VC EH EB U UF UY Y VG VH M BOLT 

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] 

CA.28 

CA.38 

120 

122 

123 

40 

44 

20 

30 

40 

45 

22.8 

33.3 

6 

8 

106 

102 

23.4 

31 

M6 x 30 

M10 x 40 

CA.48 150 153 58 35 55 38.3 10 128 40 M12 x 50 

CA.68 180 183 69 45 65 48.8 14 150 47 M16 x 60 

CA.88 210 213 78 60 80 64.4 18 180 54 M20 x 70 

Tolerances see page 1 - 4. 

6 - 107 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Helical Worm Gear Motors shaft mounted with shrink disk 

Model U UA 

[inch] 

[mm] 

CA.S28 

CA.S38 

CA.S38 

CA.S48 

CA.S68 

CA.S88 

6 - 108 

UG UH 

[inch] 

[mm] 

VL 

[inch] 

[mm] 

TA 

[inch] 

[mm] 

TB 

[inch] 

[mm] 

TC 

[inch] 

[mm] 

TD 

[inch] 

[mm] 

PA 

[inch] 

[mm] 

EA 

[inch] 

[mm] 

Q1 

[inch] 

[mm] 

- - 5.59 0.91 0.98 0.91 0.98 2.28 2.36 3.58 

1) 

Motor size 

20 20 142 23 25 23 25 58 60 91 100 * 

- - 6.54 0.79 0.98 1.06 1.26 3.03 2.76 4.09 

30 30 166 20 25 27 32 77 70 104 100 

- - 5.75 0.79 0.98 0.87 1.06 3.03 2.36 3.70 

30 30 146 20 25 22 27 77 60 94 100 

- - 6.97 0.79 0.98 0.98 1.18 3.66 2.95 4.29 

40 40 177 20 25 25 30 93 75 109 112 

- - 8.23 0.79 0.98 1.06 1.26 4.41 3.54 4.96 

50 50 209 20 25 27 32 112 90 126 132 

- - 9.49 1.18 1.38 1.14 1.34 5.20 4.13 5.67 

60 60 241 30 35 29 34 132 105 144 160 

1) Largest mountable motor size Tolerances see page 1 - 4. 

*) CA. S 28-90 not possible Minimum strength of machines drive shaft 50000 psi (360 N/mm 2 )


6 - 109 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Tandem-Helical Worm Gear Motors 


C.38-Z28 

C.38-D28 

C.48-Z28 

C.48-D28 

6 - 110 

LA71 5.47 14.29 16.46 7.97 

C 710 

LA90S 6.85 18.11 20.91 11.79 C.68-Z28 LA90S 6.85 17.89 20.69 11.79 

[inch] 

LA71 5.47 14.07 16.24 7.97 

LA71Z 5.47 15.04 17.20 8.72 LA71Z 5.47 14.82 16.99 8.72 

LA90ZL 6.85 21.65 24.45 15.33 LA90ZL 6.85 21.44 24.23 15.33 

LA100L 7.68 24.09 27.28 17.78 LA100L 7.68 23.88 27.07 17.78 

LA71 5.47 14.29 16.46 7.97 

LA71 5.47 14.07 16.24 7.97 

LA71Z 5.47 15.04 17.20 8.72 LA71Z 5.47 14.82 16.99 8.72 

C.68-D28 

LA90S 6.85 18.11 20.91 11.79 LA90S 6.85 17.89 20.69 11.79 

LA90ZL 6.85 21.65 24.45 15.33 LA90ZL 6.85 21.44 24.23 15.33 

LA71 5.47 14.29 16.46 7.97 

LA71 5.47 13.84 16.00 7.97 

LA71Z 5.47 15.04 17.20 8.72 LA71Z 5.47 14.59 16.75 8.72 

LA90S 6.85 18.11 20.91 11.79 C.88-Z28 LA90S 6.85 17.66 20.45 11.79 

LA90ZL 6.85 21.65 24.45 15.33 LA90ZL 6.85 21.20 24.00 15.33 

LA100L 7.68 24.09 27.28 17.78 LA100L 7.68 23.64 26.83 17.78 

LA71 5.47 14.29 16.46 7.97 

LA71 5.47 13.84 16.00 7.97 

LA71Z 5.47 15.04 17.20 8.72 LA71Z 5.47 14.59 16.75 8.72 

C.88-D28 

LA90S 6.85 18.11 20.91 11.79 LA90S 6.85 17.66 20.45 11.79 

LA90ZL 6.85 21.65 24.45 15.33 LA90ZL 6.85 21.20 24.00 15.33

Tandem-Helical Worm Gear Motors 



C.38-Z28 

C.38-D28 

C.48-Z28 

C.48-D28 

LA71 139.0 363.0 418.0 202.5 

C 710 

LA90S 174.0 460.0 531.0 299.5 C.68-Z28 LA90S 174.0 454.5 525.5 299.5 

[mm] 

LA71 139.0 357.5 412.5 202.5 

LA71Z 139.0 382.0 437.0 221.5 LA71Z 139.0 376.5 431.5 221.5 

LA90ZL 174.0 550.0 621.0 389.5 LA90ZL 174.0 544.5 615.5 389.5 

LA100L 195.0 612.0 693.0 451.5 LA100L 195.0 606.5 687.5 451.5 

LA71 139.0 363.0 418.0 202.5 

LA71 139.0 357.5 412.5 202.5 

LA71Z 139.0 382.0 437.0 221.5 LA71Z 139.0 376.5 431.5 221.5 

C.68-D28 

LA90S 174.0 460.0 531.0 299.5 LA90S 174.0 454.5 525.5 299.5 

LA90ZL 174.0 550.0 621.0 389.5 LA90ZL 174.0 544.5 615.5 389.5 

LA71 139.0 363.0 418.0 202.5 

LA71 139.0 351.5 406.5 202.5 

LA71Z 139.0 382.0 437.0 221.5 LA71Z 139.0 370.5 425.5 221.5 

LA90S 174.0 460.0 531.0 299.5 C.88-Z28 LA90S 174.0 448.5 519.5 299.5 

LA90ZL 174.0 550.0 621.0 389.5 LA90ZL 174.0 538.5 609.5 389.5 

LA100L 195.0 612.0 693.0 451.5 LA100L 195.0 600.5 681.5 451.5 

LA71 139.0 363.0 418.0 202.5 

LA71 139.0 351.5 406.5 202.5 

LA71Z 139.0 382.0 437.0 221.5 LA71Z 139.0 370.5 425.5 221.5 

C.88-D28 

LA90S 174.0 460.0 531.0 299.5 LA90S 174.0 448.5 519.5 299.5 

LA90ZL 174.0 550.0 621.0 389.5 LA90ZL 174.0 538.5 609.5 389.5 

6 - 111 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 








Oil fitting 






6 - 112 


C B3-00 (IM B3-00) 

CA, CAS, CAT H-01 

B A 

1 

1 

C B6-00 (IM B6-00) 


4 

* 

1 2 

C V5-00 (IM V5-00) 


B 

A 

3 

2 

1 

A 

2 

4 

1 3 

B 

C B8-00 (IM B8-00) 


4 

2 

A B 

C B7-00 (IM B7-00) 


3 1 

2 

B A 

C V6-00 (IM V6-00) 


1 

2 

3 

A 

B 

1 

* 

4








Oil fitting 






CF B5-01 (IM B5-01) 

CAD., CAF. CAZ. H-01 

B A 

CF B5-00 (IM B5-00) 


4 1 2 

1 3 

CF V1-00 (IM V1-00) 


B 

A 

A 

3 

2 

1 

2 

1 

4 

B 

CF B5-03 (IM B5-03) 


4 

1 

2 

A B 

CF B5-02 (IM B5-02) 


3 

1 

B A 

2 1 4 

CF V3-00 (IM V3-00) 


1 

2 

3 

A 

B 

6 - 113 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Tandem-Helical Worm Gear Motors and Tandem-Gear Units 




Note: 




Oil fitting 



‚ 

6 - 114 


Main Gear 

Unit 

Main Gear 

Unit

Lubrication 

‚ 


MOTOX-Helical Worm Gear Units of sizes 38...88 are furnished with filler, oil level and drain plug. Before starting operations the 


The size 28 have no venting, oil level and oil drain screw. Because of the low thermal load, no lubricant-change is necessary. 

All speed reducers are supplied with oil, ready for service, unless otherwise indicated. In order to supply units with an adequate quantity 

of lubricant, the type of mounting positions must be stated when ordering. 

MOTOX Helical Worm Geared Units are supplied with long term lubrication. The synthetic oil filling is added at the factory unless otherwise 

indicated. The unit’s name plate refers oil type (PGLP) and ISO-viskosity class. 

Maintenance 

of the helical worm gear units has to be carried out in accordance with the Operating Instructions manual supplied with the units. 


Ambient temperature 

°C 

-20* ... + 50 

0* ... + 60* 

Marking according 

to DIN 51502 

CLP PG 

ISO VG 220 

CLP PG 

ISO VG 460 

Degol 

GS 220 

Degol 

GS 450 

Enersyn 

SG-XP 220 

Enersyn 

SG-XP 460 


Optiflex A220 


Optiflex A460 



Polydea 

PGLP 220 

Polydea 

PGLP 460 

Glycolube 

220 

Glycolube 

460 

Renolin 

PG 220 

Renolin 

PG 460 

Syntheso 

D 220 EP 

Syntheso 

D 460 EP 

Tivela S 220 

Tivela S 460 

* Note: 


6 - 115 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 





Important: 


Types of gear unit 

C, CA, CAS, CAT 

Typ(e) Mounting position 

6 - 116 

B3-00 B8-00 B7-00 B6-00 V5-00 V6-00 

H-01 H-02 H-03 H-04 H-05 H-06 

C.28 0.20 / 0.05 0.40 / 0.11 0.60 / 0.16 0.20 / 0.05 0.65 / 0.17 0.35 / 0.09 

C.38 0.50 / 0.13 1.2 / 0.32 1.3 / 0.34 1.2 / 0.32 1.2 / 0.32 1.2 / 0.32 

C.48 0.70 / 0.18 1.6 / 0.42 1.7 / 0.45 1.6 / 0.42 1.3 / 0.34 1.3 / 0.34 

C.68 1.5 / 0.4 3.3 / 0.87 4.1 / 1.08 3.3 / 0.87 2.8 / 0.74 2.9 / 0.77 

C.88 1.7 / 0.45 6.1 / 1.61 6.5 / 1.72 5.1 / 1.35 4.5 / 1.19 4.5 / 1.19 

Types of gear unit 

CF, CAD, CAF, CAZ, CADS, CAFS, CAZS, CADT, CAFT, CAZT 

Typ(e) Mounting position 

B5-01 B5-03 B5-02 B5-00 V1-00 V3-00 

H-01 H-02 H-03 H-04 H-05 H-06 

C.28 0.20 / 0.05 0.40 / 0.11 0.60 / 0.16 0.20 / 0.05 0.65 / 0.17 0.35 / 0.09 

C.38 0.40 / 0.11 1.2 / 0.32 1.3 / 0.34 1.1 / 0.29 1.00 / 0.26 1.00 / 0.26 

C.48 0.50 / 0.13 1.7 / 0.45 1.8 / 0.48 1.6 / 0.42 1.3 / 0.34 1.3 / 0.34 

C.68 1.5 / 0.4 3.6 / 0.95 4.2 / 1.11 3.3 / 0.87 3.1 / 0.82 3.2 / 0.85 

C.88 1.7 / 0.45 5.9 / 1.56 7.3 / 1.93 5.2 / 1.37 4.8 / 1.27 4.8 / 1.27

Input Units 


7 - 1 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


7 - 2


Input Units 

Input Units K5TC 7 - 6 

Input Units KTC 7 - 14 

Input Units A5 7 - 22 

Input Units P5 7 - 28 

Gear Unit Weights 7 - 48 

Typ(e) Description elastic three 

piece coupling 

K5TC 

(K4) 

KTC 

(K2) 

A5 

(A) 

P5 

(P) 

short lantern with 

clamp collar for NEMA 

C-face-Motor 

(IEC on request) 

lantern three-piece 

coupled for NEMA 

C-face-Motor 


lantern with 

free-input shaft 

(metric shaft av.) 

lantern with 

free-input shaft 

and piggy-back 


 


Clamp collar Backstop 

optional 

 

 

Belt protection 

cover optional 

 

7 - 3 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Maximum Allowable Weight of Motors with MOTOX Input Adaptor for C-face / IEC Motors 

It is necessary to verify whether a Motor can be fully supported by the Gearbox. This can be verified by comparing the maximum 

moment exerted on the Gearbox to what is allowable. If the calculated moment exceeds the maximum allowable moment, it is 

recommended that a seperate Gearbox and Foot-mounted Motor be used. If a C-Face / IEC connection is still required, the Motor 

must be supported independently from the Gearbox. Utmost care must be taken to ensure that the support for the Motor does not 

impose forces on the Gearbox. 

For the following Cases, Reference to this Document is necessary : 

For all Gearbox combinations which are not depicted in this Catalogue. 

For Motors which are connected through a K2, K4, KTC, K5TC Lantern to the Gearbox. 

For Gearboxes with Lantern, which are subjected to Shock Loads and Vibration. (e.g: Travel-Drives) 

For Tandem-Gearboxes, which are subjected to Shock Loads and Vibration. (e.g: Travel-Drives) 

Input Adaptor 

Nema Frame Size 56C - 140TC 180TC - 210TC 250TC 280TC - 320TC 360TC 

IEC Frame Size 71 80 90 100 112 132 160 180 200 225 250 

Allowable Bending Moment M ba [lb.in] 1408 1408 1408 1408 3906 6776 20274 54074 54074 53233 52205 

7 - 4 

Calculation of M bex 

AG 1 Dimension as in chapter 7 “Input Units” [in] 

L c Length of the motor [in] 

F M Weight of the motor [lbf] 

M bex* existing Bending Moment [lb.in] 

Condition M bex < M ba 

*For application under shock load or vibration, multiply M bex by 2 

M bex = F M * { AG 1 + ( L c / 2 ) }

Motox backstops in input units 

Optional backstops are offered on 3-Piece Coupled (KTC, K2) and separate input assemblies (A5, P5, A, P) for service conditions that 

require the prevention of reverse direction. 

All backstops are internally mounted in the input adapter and will not interfere with usable shaft extensions. Backstops are sprag style 

and can be used up to a maximum speed of 3600 RPM. These backstops are considered to have limitless life when operating above 

the lift-off speed as given in the table below. Lift-off speed is defined as the speed at which the centrifugal force causes the sprag to 

lift off of the outer race when the shaft is rotating. Once the speed of the inner ring has dropped sufficiently to reduce the centrifugal 

force to less than the spring force, the sprag locates again on the outer ring and is ready to lock. No special lubrication is required for 

speeds above the lift-off speed. Backstops are not recommended for speeds below the lift-off speed due to lubrication concerns. 

When ordering a reducer with a backstop, it will be necessary to indicate on the order the desired direction of rotation of the output shaft. 

The direction of rotation is determined by looking at the end of the output shaft. Indicate the direction of output shaft rotation as “CW” 

for clockwise or “CCW” for counter-clockwise. For helical bevel, parallel shafts, helical worm units it is also necessary to indicate from 

which side the output shaft extension is being viewed from, either “A” or “B”. “A” and “B” sides are clearly shown in the mounting position 

charts. The direction of rotation of the input unit is determined by looking at the drive end of the input shaft. 

K2, KTC, A, A5, P, P5 

Nema Frame Size 56C 140TC 180TC 210TC 250TC 280TC 320TC 360TC 

IEC Frame Size 71 80 90 100 112 132 160 180 200 225 250 280 

Lift-Off speed [rpm] 890 820 820 750 750 670 670 610 610 610 610 400 

Maximum allowable locking 

torque of backstop 

Model Unit size Reduction 

stages 

[lb-in] 109 109 219 437 583 1340 2185 2695 4370 6556 8013 13111 

[Nm] 12.3 12.3 25 49 66 151 247 305 494 741 906 1482 

Output shaft (OS) view Output shaft direction 

of rotation 

Input shaft direction 

of rotation 

Z 28 - 188 2 into OS CW CW 

Z 28 - 188 2 into OS CCW CCW 

D 28 - 188 3 into OS CW CCW 

D 28 - 188 3 into OS CCW CW 

FZ 28 - 188 B 2 into OS - A side CW CW 

FZ 28 - 188 B 2 into OS - A side CCW CCW 

FD 28 - 188 B 3 into OS - A side CW CCW 

FD 28 - 188 B 3 into OS - A side CCW CW 

C / B 38 - 88 / 28 - 38 2 into OS - A side CW CW 

C / B 38 - 88 / 28 - 38 2 into OS - A side CCW CCW 

K 38 - 88 3 into OS - A side CW CCW 

K 38 - 88 3 into OS - A side CCW CW 

K * 108 - 188 3 into OS - A side CW CW 

K 108 - 188 3 into OS - A side CCW CCW 

K 38 - 188 3 into OS - B side CW CCW 

K 38 - 188 3 into OS - B side CCW CW 

Example : 

* K 108 - 188 

view into OS - A side 

rotation of output shaft = CW 

rotation of input shaft = CW 

Input shaft 

View 


A - side 

7 - 5 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Input Unit K5TC 

Size 56 - 145 

7 - 6 

[inch] 

K5TC 

Gear Units 

E./Z. D. K./C. FZ./FD. BD1 AK1 BE1 AJ1 BB1 BF1 BH1 FU1 V5 FZ1 FY1 AG1 

(56) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.625 2.06 0.03 0.007 2.44 

(143) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 3.11 

- - B38 38B -K5TC (145) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 3.11 

(182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 3.42 

(184) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 3.42 

(56) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.625 2.06 0.03 0.007 3.42 

(143) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 4.09 

38 - 38/48 48B -K5TC (145) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 4.09 

(182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 4.4 

(184) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 4.4 

(56) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.625 2.06 0.03 0.007 4.02 

- 38 - - -K5TC (143) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 4.69 

(145) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 4.69 

(56) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.625 2.06 0.03 0.007 3.21 

(143) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 3.88 

48 - 68 68B -K5TC (145) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 3.88 

(182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 4.19 

(184) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 4.19 

(56) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.625 2.06 0.03 0.007 3.88 

(143) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 4.55 

- 48 - - -K5TC (145) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 4.55 

(182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 4.86 

(184) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 4.86 

(56) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.625 2.06 0.03 0.007 2.97 

(143) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 3.64 

(145) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 3.64 

68 - 88 88B -K5TC (182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 3.95 

(184) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 3.95 

(213) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 7.03 

(215) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 7.03 

(56) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.625 2.06 0.03 0.007 3.7 

(143) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 4.37 

- 68 - - -K5TC (145) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 4.37 

(182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 4.68 

(184) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 4.68 


Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

[inch]

[ 


Size 56 - 145 


K5TC 

Gear Units 


(56) 168 114,3 12 149,2 5 11 16,5 15,875 52,324 0,72 0,188 62,5 

(143) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 79,5 

- - B38 38B -K5TC (145) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 79,5 

(182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 87,5 

(184) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 87,5 

(56) 168 114,3 12 149,2 5 11 16,5 15,875 52,324 0,72 0,188 87,5 

(143) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 104,5 

38 - 38/48 48B -K5TC (145) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 104,5 

(182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 112,5 

(184) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 112,5 

(56) 168 114,3 12 149,2 5 11 16,5 15,875 52,324 0,72 0,188 102,5 

- 38 - - -K5TC (143) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 119,5 

(145) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 119,5 

(56) 168 114,3 12 149,2 5 11 16,5 15,875 52,324 0,72 0,188 82 

(143) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 99 

48 - 68 68B -K5TC (145) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 99 

(182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 107 

(184) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 107 

(56) 168 114,3 12 149,2 5 11 16,5 15,875 52,324 0,72 0,188 99 

(143) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 116 

- 48 - - -K5TC (145) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 116 

(182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 124 

(184) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 124 

(56) 168 114,3 12 149,2 5 11 16,5 15,875 52,324 0,72 0,188 76 

(143) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 93 

(145) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 93 

68 - 88 88B -K5TC (182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 101 

(184) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 101 

(213) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 179 

(215) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 179 

(56) 168 114,3 12 149,2 5 11 16,5 15,875 52,324 0,72 0,188 94,5 

(143) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 111,5 

- 68 - - -K5TC (145) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 111,5 

(182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 119,5 

(184) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 119,5 


Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

[mm] 

7 - 7 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


[ 


Size 56 - 145 

7 - 8 

K5TC 

Gear Units 


(143) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 3.05 

(145) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 3.05 

(182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 3.26 

88 - 108 108B -K5TC 

(184) 

(213) 

8.98 

8.98 

8.5 

8.5 

0.69 

0.69 

7.25 

7.25 

0.22 

0.22 

0.53 

0.53 

0.69 

0.73 

1.126 

1.375 

2.75 

3.37 

0.05 

0.06 

0.01 

0.012 

3.26 

6.3 

(215) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 6.3 

(254) 10.23 8.5 0.94 7.25 0.2 0.53 0,93 1.625 3.98 0.07 0.015 6.24 

(256) 10.23 8.5 0.94 7.25 0.2 0.53 0,93 1.625 3.98 0.07 0.015 6.24 

(56) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.625 2.06 0.03 0.007 3.37 

(143) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 4.04 

(145) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 4.04 

- 88 - - -K5TC (182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 4.35 

(184) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 4.35 

(213) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 7.4 

(215) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 7.4 

(143) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 2.6 

(145) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 2.6 

(182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 2.79 

(184) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 2.79 

108 - 128 128B -K5TC (213) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 5.81 

(215) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 5.81 

(254) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 5.79 

(256) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 5.79 

(286) 11.89 10.5 0.94 9 0.2 0.53 1.1 1.875 4.61 0.08 0.02 6.57 

(143) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 3.8 

(145) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 3.8 

(182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 4.11 

- 108 - - -K5TC 

(184) 

(213) 

8.98 

8.98 

8.5 

8.5 

0.69 

0.69 

7.25 

7.25 

0.22 

0.22 

0.53 

0.53 

0.69 

0.73 

1.126 

1.375 

2.75 

3.37 

0.05 

0.06 

0.01 

0.012 

4.11 

7.09 

(215) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 7.09 

(254) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 6.95 

(256) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 6.95 


Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

[inch]


Size 56 - 145 


K5TC 

Gear Units 


(143) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 78 

(145) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 78 

(182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 83,5 

88 - 108 108B -K5TC 

(184) 

(213) 

228 

228 

215,9 

215,9 

17,5 

17,5 

184,15 

184,15 

5,5 

5,5 

13,5 

13,5 

17,5 

18,5 

28,6 

34,925 

69,9 

85,6 

1,25 

1,53 

0,25 

0,313 

83,5 

160,5 

(215) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 160,5 

(254) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 159 

(256) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 159 

(56) 168 114,3 12 149,2 5 11 16,5 15,875 52,324 0,72 0,188 86 

(143) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 103 

(145) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 103 

- 88 - - -K5TC (182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 111 

(184) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 111 

(213) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 188,5 

(215) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 188,5 

(143) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 66,5 

(145) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 66,5 

(182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 71,5 

(184) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 71,5 

108 - 128 128B -K5TC (213) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 148 

(215) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 148 

(254) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 147,5 

(256) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 147,5 

(286) 302 266,7 24 228,6 5 13,5 27,9 47,625 117,094 2,1 0,5 167,5 

(143) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 97 

(145) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 97 

(182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 105 

- 108 - - -K5TC 

(184) 

(213) 

228 

228 

215,9 

215,9 

17,5 

17,5 

184,15 

184,15 

5,5 

5,5 

13,5 

13,5 

17,5 

18,5 

28,6 

34,925 

69,9 

85,6 

1,25 

1,53 

0,25 

0,313 

105 

180,5 

(215) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 180,5 

(254) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 177 

(256) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 177 


Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

[mm] 

7 - 9 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Size 56 - 145 

7 - 10 

Size 182 - 365 

Size 182 - 326 

K5TC 

Size 364 - 365 

Gear Units 


(182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 2.42 

(184) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 2.42 

(213) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 5.39 

(215) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 5.39 

128 - 148 148B -K5TC (254) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 5.26 

(256) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 5.26 

(286) 11.89 10.5 0.94 9 0.2 0.53 1.1 1.875 4.61 0.08 0.02 6.04 

(324) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 7.64 

(326) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 7.64 

(143) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 3.52 

(145) 6.61 4.5 0.47 5.87 0.2 0.43 0.65 0.875 2.12 0.04 0.007 3.52 

(182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 3.83 

(184) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 3.83 

- 128 - - -K5TC (213) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 6.73 

(215) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 6.73 

(254) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 6.6 

(256) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 6.6 

(286) 11.89 10.5 0.94 9 0.2 0.53 1.1 1.875 4.61 0.08 0.02 7.5 

(213) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 5.08 

(215) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 5.08 

(254) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 4.85 

(256) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 4.85 

148 - 168 168B -K5TC (286) 11.89 10.5 0.94 9 0.2 0.53 1.1 1.875 4.61 0.08 0.02 5.74 

(324) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 7.35 

(326) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 7.35 

(364) 14.01 12.5 1.02 11 0.02 0.67 1.28 2.375 5.87 0.1 0.025 9.08 

(365) 14.01 12.5 1.02 11 0.02 0.67 1.28 2.375 5.87 0.1 0.025 9.08 

(182) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 3.64 

(184) 8.98 8.5 0.69 7.25 0.22 0.53 0.69 1.126 2.75 0.05 0.01 3.64 

(213) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 6.57 

(215) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 6.57 

- 148 - - -K5TC (254) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 6.34 

(256) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 6.34 

(286) 11.89 10.5 0.94 9 0.2 0.53 1.1 1.875 4.61 0.08 0.02 7.24 

(324) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 8.84 

(326) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 8.84 


[inch]


Size 56 - 145 

Size 182 - 365 


Size 182 - 326 

K5TC 

Size 364 - 365 

Gear Units 


(182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 62 

(184) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 62 

(213) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 137,5 

(215) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 137,5 

128 - 148 148B -K5TC (254) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 134 

(256) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 134 

(286) 302 266,7 24 228,6 5 13,5 27,9 47,625 117,094 2,1 0,5 154 

(324) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 194,5 

(326) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 194,5 

(143) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 90 

(145) 168 114,3 12 149,2 5 11 16,5 22,225 53,85 0,97 0,188 90 

(182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 98 

(184) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 98 

- 128 - - -K5TC (213) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 171,5 

(215) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 171,5 

(254) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 168 

(256) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 168 

(286) 302 266,7 24 228,6 5 13,5 27,9 47,625 117,094 2,1 0,5 191 

(213) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 129,5 

(215) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 129,5 

(254) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 123,5 

(256) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 123,5 

148 - 168 168B -K5TC (286) 302 266,7 24 228,6 5 13,5 27,9 47,625 117,094 2,1 0,5 146,5 

(324) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 187 

(326) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 187 

(364) 356 317,5 26 279,4 5 17 32,5 60,325 149,098 2,65 0,625 231 

(365) 356 317,5 26 279,4 5 17 32,5 60,325 149,098 2,65 0,625 231 

(182) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 93 

(184) 228 215,9 17,5 184,15 5,5 13,5 17,5 28,6 69,9 1,25 0,25 93 

(213) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 167,5 

(215) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 167,5 

- 148 - - -K5TC (254) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 161,5 

(256) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 161,5 

(286) 302 266,7 24 228,6 5 13,5 27,9 47,625 117,094 2,1 0,5 184,5 

(324) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 225 

(326) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 225 


[mm] 

7 - 11 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Size 56 - 145 

7 - 12 

K5TC 

Gear Units 


(213) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 4.51 

(215) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 4.51 

(254) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 4.28 

(256) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 4.28 

168 - 188 188B -K5TC (286) 11.89 10.5 0.94 9 0.2 0.53 1.1 1.875 4.61 0.08 0.02 5.17 

(324) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 6.78 

(326) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 6.78 

(364) 14.01 12.5 1.02 11 0.02 0.67 1.28 2.375 5.87 0.1 0.025 8.51 

(365) 14.01 12.5 1.02 11 0.02 0.67 1.28 2.375 5.87 0.1 0.025 8.51 

(213) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 6.12 

(215) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 6.12 

(254) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 5.89 

- 168 - - -K5TC (256) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 5.89 

(286) 11.89 10.5 0.94 9 0.2 0.53 1.1 1.875 4.61 0.08 0.02 6.79 

(324) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 8.39 

(326) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 8.39 

(254) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 4.28 

(256) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 4.28 

(286) 11.89 10.5 0.94 9 0.2 0.53 1.1 1.875 4.61 0.08 0.02 5.17 

188 - - - -K5TC (324) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 6.78 

(326) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 6.78 

(364) 14.01 12.5 1.02 11 0.02 0.67 1.28 2.375 5.87 0.1 0.025 8.51 

(365) 14.01 12.5 1.02 11 0.02 0.67 1.28 2.375 5.87 0.1 0.025 8.51 

(213) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 4.51 

(215) 8.98 8.5 0.69 7.25 0.22 0.53 0.73 1.375 3.37 0.06 0.012 4.51 

(254) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 4.28 

(256) 10.23 8.5 0.94 7.25 0.2 0.53 0.93 1.625 3.98 0.07 0.015 4.28 

- 188 - - -K5TC (286) 11.89 10.5 0.94 9 0.2 0.53 1.1 1.875 4.61 0.08 0.02 5.17 

(324) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 6.78 

(326) 14.01 12.5 1.02 11 0.2 0.67 0.99 2.125 5.24 0.09 0.02 6.78 

(364) 14.01 12.5 1.02 11 0.02 0.67 1.28 2.375 5.87 0.1 0.025 8.51 

(365) 14.01 12.5 1.02 11 0.02 0.67 1.28 2.375 5.87 0.1 0.025 8.51 


Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

[inch]


Size 56 - 145 


K5TC 

Gear Units 


(213) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 115 

(215) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 115 

(254) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 109 

(256) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 109 

168 - 188 188B -K5TC (286) 302 266,7 24 228,6 5 13,5 27,9 47,625 117,094 2,1 0,5 132 

(324) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 172,5 

(326) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 172,5 

(364) 356 317,5 26 279,4 5 17 32,5 60,325 149,098 2,65 0,625 216,5 

(365) 356 317,5 26 279,4 5 17 32,5 60,325 149,098 2,65 0,625 216,5 

(213) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 156 

(215) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 156 

(254) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 150 

- 168 - - -K5TC (256) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 150 

(286) 302 266,7 24 228,6 5 13,5 27,9 47,625 117,094 2,1 0,5 173 

(324) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 213,5 

(326) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 213,5 

(254) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 109 

(256) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 109 

(286) 302 266,7 24 228,6 5 13,5 27,9 47,625 117,094 2,1 0,5 132 

188 - - - -K5TC (324) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 172,5 

(326) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 172,5 

(364) 356 317,5 26 279,4 5 17 32,5 60,325 149,098 2,65 0,625 216,5 

(365) 356 317,5 26 279,4 5 17 32,5 60,325 149,098 2,65 0,625 216,5 

(213) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 115 

(215) 228 215,9 17,5 184,15 5,5 13,5 18,5 34,925 85,6 1,53 0,313 115 

(254) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 109 

(256) 260 215,9 24 184,15 5 13,5 23,6 41,275 101,092 1,79 0,375 109 

- 188 - - -K5TC (286) 302 266,7 24 228,6 5 13,5 27,9 47,625 117,094 2,1 0,5 132 

(324) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 172,5 

(326) 356 317,5 26 279,4 5 17 25,1 53,975 133,096 2,35 0,5 172,5 

(364) 356 317,5 26 279,4 5 17 32,5 60,325 149,098 2,65 0,625 216,5 

(365) 356 317,5 26 279,4 5 17 32,5 60,325 149,098 2,65 0,625 216,5 


Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

[mm] 

7 - 13 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Input Unit KTC 

Gear Units 


(56) 6.61 4.5 0.55 5.874 0.2 0.43 1.08 0.626 2.06 0.72 0.188 5.57 

(143) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 6.91 

- - B38 38B -KTC (145) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 6.91 

(182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 8.27 

(184) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 8.27 

(56) 6.61 4.5 0.55 5.874 0.2 0.43 1.08 0.626 2.06 0.72 0.188 6.55 

(143) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 7.89 

38 - 38/48 48B -KTC (145) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 7.89 

(182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 9.25 

(184) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 9.25 

(56) 6.61 4.5 0.55 5.874 0.2 0.43 1.08 0.626 2.06 0.72 0.188 7.15 

- 38 - - -KTC (143) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 8.49 

(145) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 8.49 

(56) 6.61 4.5 0.55 5.874 0.2 0.43 1.08 0.626 2.06 0.72 0.188 6.34 

(143) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 7.68 

48 - 68 68B -KTC (145) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 7.68 

(182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 9.04 

(184) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 9.04 

(56) 6.61 4.5 0.55 5.874 0.2 0.43 1.08 0.626 2.06 0.72 0.188 7.01 

(143) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 8.35 

- 48 - - -KTC (145) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 8.35 

(182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 9.71 

(184) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 9.71 

(56) 6.61 4.5 0.55 5.874 0.2 0.43 1.08 0.626 2.06 0.72 0.188 6.1 

(143) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 7.44 

(145) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 7.44 

68 - 88 88B -KTC (182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 8.8 

(184) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 8.8 

(213) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 10.87 

(215) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 10.87 

(56) 6.61 4.5 0.55 5.874 0.2 0.43 1.08 0.626 2.06 0.72 0.188 6.83 

(143) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 8.17 

- 68 - - -KTC (145) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 8.17 

(182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 9.53 

(184) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 9.53 

7 - 14 

Size 56 - 145 


Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

[inch] 

KTC 

[inch]

[ 


Size 56 - 145 


Gear Units 


(56) 168 114,3 14 149,2 5 11 27,5 15,9 52,324 18,288 4,7752 142 

(143) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 176 

- - B38 38B -KTC (145) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 176 

(182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 210,5 

(184) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 210,5 

(56) 168 114,3 14 149,2 5 11 27,5 15,9 52,324 18,288 4,7752 167 

(143) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 201 

38 - 38/48 48B -KTC (145) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 201 

(182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 235,5 

(184) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 235,5 

(56) 168 114,3 14 149,2 5 11 27,5 15,9 52,324 18,288 4,7752 182 

- 38 - - -KTC (143) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 216 

(145) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 216 

(56) 168 114,3 14 149,2 5 11 27,5 15,9 52,324 18,288 4,7752 161,5 

(143) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 195,5 

48 - 68 68B -KTC (145) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 195,5 

(182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 230 

(184) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 230 

(56) 168 114,3 14 149,2 5 11 27,5 15,9 52,324 18,288 4,7752 178,5 

(143) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 212,5 

- 48 - - -KTC (145) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 212,5 

(182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 247 

(184) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 247 

(56) 168 114,3 14 149,2 5 11 27,5 15,9 52,324 18,288 4,7752 155,5 

(143) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 189,5 

(145) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 189,5 

68 - 88 88B -KTC (182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 224 

(184) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 224 

(213) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 276,5 

(215) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 276,5 

(56) 168 114,3 14 149,2 5 11 27,5 15,9 52,324 18,288 4,7752 174 

(143) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 208 

- 68 - - -KTC (145) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 208 

(182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 242,5 

(184) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 242,5 


Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

KTC 

[mm] 

7 - 15 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


[ 


Gear Units 


(143) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 6.85 

(145) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 6.85 

(182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 8.11 

88 - 108 108B -KTC 

(184) 

(213) 

8.98 

8.98 

8.5 

8.5 

0.87 

0.87 

7.25 

7.25 

0.22 

0.22 

0.53 

0.53 

1.44 

1.79 

1.126 

1.375 

2.75 

3.37 

1.25 

1.53 

0.25 

0.313 

8.11 

10.14 

(215) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 10.14 

(254) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 12.08 

(256) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 12.08 

(56) 6.61 4.5 0.55 5.874 0.2 0.43 1.08 0.626 2.06 0.72 0.188 6.5 

(143) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 7.84 

(145) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 7.84 

- 88 - - -KTC (182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 9.2 

(184) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 9.2 

(213) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 11.24 

(215) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 11.24 

(143) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 6.4 

(145) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 6.4 

(182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 7.64 

(184) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 7.64 

108 - 128 128B -KTC 

(213) 

(215) 

8.98 

8.98 

8.5 

8.5 

0.87 

0.87 

7.25 

7.25 

0.22 

0.22 

0.53 

0.53 

1.79 

1.79 

1.375 

1.375 

3.37 

3.37 

1.53 

1.53 

0.313 

0.313 

9.65 

9.65 

(254) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 11.63 

(256) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 11.63 

(284) 11.22 10.49 0.94 9 0.2 0.53 2.38 1.875 4.38 2.13 0.5 14.33 

(286) 11.22 10.49 0.94 9 0.2 0.53 2.38 1.875 4.38 2.13 0.5 14.33 

(143) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 7.6 

(145) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 7.6 

(182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 8.96 

- 108 - - -KTC 

(184) 

(213) 

8.98 

8.98 

8.5 

8.5 

0.87 

0.87 

7.25 

7.25 

0.22 

0.22 

0.53 

0.53 

1.44 

1.79 

1.126 

1.375 

2.75 

3.37 

1.25 

1.53 

0.25 

0.313 

8.96 

10.93 

(215) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 10.93 

(254) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 12.79 

(256) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 12.79 


7 - 16 

Size 56 - 145 

Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

KTC 

[inch]


Size 56 - 145 


Gear Units 


(143) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 174,5 

(145) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 174,5 

(182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 206,5 

88 - 108 108B -KTC 

(184) 

(213) 

228 

228 

215,9 

215,9 

22 

22 

184,15 

184,15 

5,5 

5,5 

13,5 

13,5 

36,5 

45,5 

28,6 

34,925 

69,9 

85,6 

31,75 

38,862 

6,35 

7,9502 

206,5 

258 

(215) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 258 

(254) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 307,5 

(256) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 307,5 

(56) 168 114,3 14 149,2 5 11 27,5 15,9 52,324 18,288 4,7752 165,5 

(143) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 199,5 

(145) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 199,5 

- 88 - - -KTC (182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 234 

(184) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 234 

(213) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 286 

(215) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 286 

(143) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 163 

(145) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 163 

(182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 194,5 

(184) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 194,5 

108 - 128 128B -KTC 

(213) 

(215) 

228 

228 

215,9 

215,9 

22 

22 

184,15 

184,15 

5,5 

5,5 

13,5 

13,5 

45,5 

45,5 

34,925 

34,925 

85,6 

85,6 

38,862 

38,862 

7,9502 

7,9502 

245,5 

245,5 

(254) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 296 

(256) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 296 

(284) 285 266,5 24 228,6 5 13,5 60,5 47,625 111,252 54,102 12,7 364,5 

(286) 285 266,5 24 228,6 5 13,5 60,5 47,625 111,252 54,102 12,7 364,5 

(143) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 193,5 

(145) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 193,5 

(182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 228 

- 108 - - -KTC 

(184) 

(213) 

228 

228 

215,9 

215,9 

22 

22 

184,15 

184,15 

5,5 

5,5 

13,5 

13,5 

36,5 

45,5 

28,6 

34,925 

69,9 

85,6 

31,75 

38,862 

6,35 

7,9502 

228 

278 

(215) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 278 

(254) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 325,5 

(256) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 325,5 


Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

KTC 

[mm] 

7 - 17 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Units 


(182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 7.27 

(184) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 7.27 

(213) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 9.23 

(215) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 9.23 

128 - 148 148B -KTC 

(254) 

(256) 

10.12 

10.12 

8.5 

8.5 

0.94 

0.94 

7.25 

7.25 

0.2 

0.2 

0.53 

0.53 

1.97 

1.97 

1.625 

1.625 

3.75 

3.75 

1.81 

1.81 

0.375 

0.375 

10.98 

10.98 

(284) 11.22 10.49 0.94 9 0.2 0.53 2.38 1.875 4.38 2.13 0.5 13.8 

(286) 11.22 10.49 0.94 9 0.2 0.53 2.38 1.875 4.38 2.13 0.5 13.8 

(324) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 16.3 

(326) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 16.3 

(143) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 7.32 

(145) 6.61 4.5 0.55 5.874 0.2 0.43 1.1 0.874 2.12 0.97 0.188 7.32 

(182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 8.68 

(184) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 8.68 

- 128 - - -KTC 

(213) 

(215) 

8.98 

8.98 

8.5 

8.5 

0.87 

0.87 

7.25 

7.25 

0.22 

0.22 

0.53 

0.53 

1.79 

1.79 

1.375 

1.375 

3.37 

3.37 

1.53 

1.53 

0.313 

0.313 

10.57 

10.57 

(254) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 12.44 

(256) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 12.44 

(284) 11.22 10.49 0.94 9 0.2 0.53 2.38 1.875 4.38 2.13 0.5 15.26 

(286) 11.22 10.49 0.94 9 0.2 0.53 2.38 1.875 4.38 2.13 0.5 15.26 

(213) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 8.92 

(215) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 8.92 

(254) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 10.69 

(256) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 10.69 

148 - 168 168B -KTC 

(284) 

(286) 

11.22 

11.22 

10.49 

10.49 

0.94 

0.94 

9 

9 

0.2 

0.2 

0.53 

0.53 

2.38 

2.38 

1.875 

1.875 

4.38 

4.38 

2.13 

2.13 

0.5 

0.5 

13.5 

13.5 

(324) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 16.01 

(326) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 16.01 

(364) 13.98 12.5 1.02 11 0.2 0.67 3.07 2.375 5.62 2.69 0.625 17.05 

(365) 13.98 12.5 1.02 11 0.2 0.67 3.07 2.375 5.62 2.69 0.625 17.05 

(182) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 8.49 

(184) 8.98 8.5 0.87 7.25 0.22 0.53 1.44 1.126 2.75 1.25 0.25 8.49 

(213) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 10.41 

(215) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 10.41 

- 148 - - -KTC 

(254) 

(256) 

10.12 

10.12 

8.5 

8.5 

0.94 

0.94 

7.25 

7.25 

0.2 

0.2 

0.53 

0.53 

1.97 

1.97 

1.625 

1.625 

3.75 

3.75 

1.81 

1.81 

0.375 

0.375 

12.18 

12.18 

(284) 11.22 10.49 0.94 9 0.2 0.53 2.38 1.875 4.38 2.13 0.5 15 

(286) 11.22 10.49 0.94 9 0.2 0.53 2.38 1.875 4.38 2.13 0.5 15 

(324) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 17.5 

(326) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 17.5 


7 - 18 

Size 56 - 145 

Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

KTC 

[inch]


Size 56 - 145 


Gear Units 


(182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 185 

(184) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 185 

(213) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 235 

(215) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 235 

128 - 148 148B -KTC 

(254) 

(256) 

257 

257 

215,9 

215,9 

24 

24 

184,15 

184,15 

5 

5 

13,5 

13,5 

50 

50 

41,275 

41,275 

95,25 

95,25 

45,974 

45,974 

9,525 

9,525 

279,5 

279,5 

(284) 285 266,5 24 228,6 5 13,5 60,5 47,625 111,252 54,102 12,7 351 

(286) 285 266,5 24 228,6 5 13,5 60,5 47,625 111,252 54,102 12,7 351 

(324) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 414,5 

(326) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 414,5 

(143) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 186,5 

(145) 168 114,3 14 149,2 5 11 28 22,2 53,848 24,638 4,7752 186,5 

(182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 221 

(184) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 221 

- 128 - - -KTC 

(213) 

(215) 

228 

228 

215,9 

215,9 

22 

22 

184,15 

184,15 

5,5 

5,5 

13,5 

13,5 

45,5 

45,5 

34,925 

34,925 

85,6 

85,6 

38,862 

38,862 

7,9502 

7,9502 

269 

269 

(254) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 316,5 

(256) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 316,5 

(284) 285 266,5 24 228,6 5 13,5 60,5 47,625 111,252 54,102 12,7 388 

(286) 285 266,5 24 228,6 5 13,5 60,5 47,625 111,252 54,102 12,7 388 

(213) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 227 

(215) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 227 

(254) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 272 

(256) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 272 

148 - 168 168B -KTC 

(284) 

(286) 

285 

285 

266,5 

266,5 

24 

24 

228,6 

228,6 

5 

5 

13,5 

13,5 

60,5 

60,5 

47,625 

47,625 

111,252 

111,252 

54,102 

54,102 

12,7 

12,7 

343,5 

343,5 

(324) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 407 

(326) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 407 

(364) 355 317,5 26 279,4 5 17 78 60,325 142,748 68,326 15,875 433,5 

(365) 355 317,5 26 279,4 5 17 78 60,325 142,748 68,326 15,875 433,5 

(182) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 216 

(184) 228 215,9 22 184,15 5,5 13,5 36,5 28,6 69,9 31,75 6,35 216 

(213) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 265 

(215) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 265 

- 148 - - -KTC 

(254) 

(256) 

257 

257 

215,9 

215,9 

24 

24 

184,15 

184,15 

5 

5 

13,5 

13,5 

50 

50 

41,275 

41,275 

95,25 

95,25 

45,974 

45,974 

9,525 

9,525 

310 

310 

(284) 285 266,5 24 228,6 5 13,5 60,5 47,625 111,252 54,102 12,7 381,5 

(286) 285 266,5 24 228,6 5 13,5 60,5 47,625 111,252 54,102 12,7 381,5 

(324) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 445 

(326) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 445 


Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

KTC 

[mm] 

7 - 19 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Gear Units 


(213) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 8.35 

(215) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 8.35 

(254) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 10.12 

(256) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 10.12 

168 - 188 188B -KTC 

(284) 

(286) 

11.22 

11.22 

10.49 

10.49 

0.94 

0.94 

9 

9 

0.2 

0.2 

0.53 

0.53 

2.38 

2.38 

1.875 

1.875 

4.38 

4.38 

2.13 

2.13 

0.5 

0.5 

12.93 

12.93 

(324) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 15.44 

(326) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 15.44 

(364) 13.98 12.5 1.02 11 0.2 0.67 3.07 2.375 5.62 2.69 0.625 16.48 

(365) 13.98 12.5 1.02 11 0.2 0.67 3.07 2.375 5.62 2.69 0.625 16.48 

(213) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 9.96 

(215) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 9.96 

(254) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 11.73 

- 168 - - -KTC 

(256) 

(284) 

10.12 

11.22 

8.5 

10.49 

0.94 

0.94 

7.25 

9 

0.2 

0.2 

0.53 

0.53 

1.97 

2.38 

1.625 

1.875 

3.75 

4.38 

1.81 

2.13 

0.375 

0.5 

11.73 

14.55 

(286) 11.22 10.49 0.94 9 0.2 0.53 2.38 1.875 4.38 2.13 0.5 14.55 

(324) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 17.05 

(326) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 17.05 

(254) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 10.12 

(256) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 10.12 

(284) 11.22 10.49 0.94 9 0.2 0.53 2.38 1.875 4.38 2.13 0.5 12.93 

188 - - - -KTC 

(286) 

(324) 

11.22 

13.98 

10.49 

12.5 

0.94 

1.02 

9 

11 

0.2 

0.2 

0.53 

0.67 

2.38 

2.8 

1.875 

2.125 

4.38 

5 

2.13 

2.38 

0.5 

0.5 

12.93 

15.44 

(326) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 15.44 

(364) 13.98 12.5 1.02 11 0.2 0.67 3.07 2.375 5.62 2.69 0.625 16.48 

(365) 13.98 12.5 1.02 11 0.2 0.67 3.07 2.375 5.62 2.69 0.625 16.48 

(213) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 8.35 

(215) 8.98 8.5 0.87 7.25 0.22 0.53 1.79 1.375 3.37 1.53 0.313 8.35 

(254) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 10.12 

(256) 10.12 8.5 0.94 7.25 0.2 0.53 1.97 1.625 3.75 1.81 0.375 10.12 

- 188 - - -KTC 

(284) 

(286) 

11.22 

11.22 

10.49 

10.49 

0.94 

0.94 

9 

9 

0.2 

0.2 

0.53 

0.53 

2.38 

2.38 

1.875 

1.875 

4.38 

4.38 

2.13 

2.13 

0.5 

0.5 

12.93 

12.93 

(324) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 15.44 

(326) 13.98 12.5 1.02 11 0.2 0.67 2.8 2.125 5 2.38 0.5 15.44 

(364) 13.98 12.5 1.02 11 0.2 0.67 3.07 2.375 5.62 2.69 0.625 16.48 

(365) 13.98 12.5 1.02 11 0.2 0.67 3.07 2.375 5.62 2.69 0.625 16.48 


7 - 20 

Size 56 - 145 

Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

KTC 

[inch]

[ 


Size 56 - 145 


Gear Units 


(213) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 212,5 

(215) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 212,5 

(254) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 257,5 

(256) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 257,5 

168 - 188 188B -KTC 

(284) 

(286) 

285 

285 

266,5 

266,5 

24 

24 

228,6 

228,6 

5 

5 

13,5 

13,5 

60,5 

60,5 

47,625 

47,625 

111,252 

111,252 

54,102 

54,102 

12,7 

12,7 

329 

329 

(324) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 392,5 

(326) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 392,5 

(364) 355 317,5 26 279,4 5 17 78 60,325 142,748 68,326 15,875 419 

(365) 355 317,5 26 279,4 5 17 78 60,325 142,748 68,326 15,875 419 

(213) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 253,5 

(215) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 253,5 

(254) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 298,5 

- 168 - - -KTC 

(256) 

(284) 

257 

285 

215,9 

266,5 

24 

24 

184,15 

228,6 

5 

5 

13,5 

13,5 

50 

60,5 

41,275 

47,625 

95,25 

111,252 

45,974 

54,102 

9,525 

12,7 

298,5 

370 

(286) 285 266,5 24 228,6 5 13,5 60,5 47,625 111,252 54,102 12,7 370 

(324) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 433,5 

(326) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 433,5 

(254) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 257,5 

(256) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 257,5 

(284) 285 266,5 24 228,6 5 13,5 60,5 47,625 111,252 54,102 12,7 329 

188 - - - -KTC 

(286) 

(324) 

285 

355 

266,5 

317,5 

24 

26 

228,6 

279,4 

5 

5 

13,5 

17 

60,5 

71 

47,625 

53,975 

111,252 

127 

54,102 

60,452 

12,7 

12,7 

329 

392,5 

(326) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 392,5 

(364) 355 317,5 26 279,4 5 17 78 60,325 142,748 68,326 15,875 419 

(365) 355 317,5 26 279,4 5 17 78 60,325 142,748 68,326 15,875 419 

(213) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 212,5 

(215) 228 215,9 22 184,15 5,5 13,5 45,5 34,925 85,6 38,862 7,9502 212,5 

(254) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 257,5 

(256) 257 215,9 24 184,15 5 13,5 50 41,275 95,25 45,974 9,525 257,5 

- 188 - - -KTC 

(284) 

(286) 

285 

285 

266,5 

266,5 

24 

24 

228,6 

228,6 

5 

5 

13,5 

13,5 

60,5 

60,5 

47,625 

47,625 

111,252 

111,252 

54,102 

54,102 

12,7 

12,7 

329 

329 

(324) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 392,5 

(326) 355 317,5 26 279,4 5 17 71 53,975 127 60,452 12,7 392,5 

(364) 355 317,5 26 279,4 5 17 78 60,325 142,748 68,326 15,875 419 

(365) 355 317,5 26 279,4 5 17 78 60,325 142,748 68,326 15,875 419 


Size 182 - 365 

Size 182 - 326 

Size 364 - 365 

KTC 

[mm] 

7 - 21 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Input Unit A5 

Gear Units 

E./Z. D. K./C. FZ./FD. BD1 AK1 AJ1 K1 BF1 FU1 V1 V5 V01 FZ1 FY1 N AG1 

(71) 5.35 3.74 4.57 0.16 M8x14 0.625 1.57 1.25 0.17 0.7 0.188 2.4 4.92 

- - B38 38B -A5 

(80) 

(90) 

5.51 

5.51 

3.74 

3.74 

4.57 

4.57 

0.16 

0.16 

M8x14 

M8x14 

0.75 

0.875 

1.57 

1.97 

1.25 

1.5 

0.17 

0.27 

0.83 

0.96 

0.188 

0.188 

2.4 

2.8 

6.3 

6.69 

(100) 6.85 4.72 5.71 0.16 M10x17 1.125 2.36 1.88 0.29 1.24 0.25 3.27 7.32 

(71) 5.35 3.74 4.57 0.16 M8x14 0.63 1.57 1.25 0.17 0.7 0.188 2.4 5.9 

38 - 38/48 48B -A5 

(80) 

(90) 

5.51 

5.51 

3.74 

3.74 

4.57 

4.57 

0.16 

0.16 

M8x14 

M8x14 

0.75 

0.88 

1.57 

1.97 

1.25 

1.5 

0.17 

0.27 

0.83 

0.96 

0.188 

0.188 

2.4 

2.8 

7.28 

7.67 

(100) 6.85 4.72 5.71 0.16 M10x17 1.13 2.36 1.88 0.29 1.24 0.25 3.27 8.3 

(71) 5.35 3.74 4.57 0.16 M8x14 0.63 1.57 1.25 0.17 0.7 0.188 2.4 6.5 

- 38 - - -A5 (80) 5.51 3.74 4.57 0.16 M8x14 0.75 1.57 1.25 0.17 0.83 0.188 2.4 7.88 

(90) 5.51 3.74 4.57 0.16 M8x14 0.88 1.97 1.5 0.27 0.96 0.188 2.8 8.27 

(71) 5.35 3.74 4.57 0.16 M8x14 0.625 1.57 1.25 0.17 0.7 0.188 2.4 5.69 

(80) 5.51 3.74 4.57 0.16 M8x14 0.75 1.57 1.25 0.17 0.83 0.188 2.4 7.07 

48 - 68 68B -A5 (90) 5.51 3.74 4.57 0.16 M8x14 0.875 1.97 1.5 0.27 0.96 0.188 2.8 7.46 

(100) 6.85 4.72 5.71 0.16 M10x17 1.125 2.36 1.88 0.29 1.24 0.25 3.27 8.09 

(112) 7.01 4.72 5.71 0.16 M10x17 1.25 2.36 1.88 0.37 1.36 0.25 3.27 8.13 

(71) 5.35 3.74 4.57 0.16 M8x14 0.625 1.57 1.25 0.17 0.7 0.188 2.4 6.36 

- 48 - - -A5 

(80) 

(90) 

5.51 

5.51 

3.74 

3.74 

4.57 

4.57 

0.16 

0.16 

M8x14 

M8x14 

0.75 

0.875 

1.57 

1.97 

1.25 

1.5 

0.17 

0.27 

0.83 

0.96 

0.188 

0.188 

2.4 

2.8 

7.74 

8.13 

(100) 6.85 4.72 5.71 0.16 M10x17 1.125 2.36 1.88 0.29 1.24 0.25 3.27 8.76 

(71) 5.35 3.74 4.57 0.16 M8x14 0.625 1.57 1.25 0.17 0.7 0.188 2.4 5.45 

(80) 5.51 3.74 4.57 0.16 M8x14 0.75 1.57 1.25 0.17 0.83 0.188 2.4 6.83 

68 - 88 88B -A5 

(90) 

(100) 

5.51 

6.85 

3.74 

4.72 

4.57 

5.71 

0.16 

0.16 

M8x14 

M10x17 

0.875 

1.125 

1.97 

2.36 

1.5 

1.88 

0.27 

0.29 

0.96 

1.24 

0.188 

0.25 

2.8 

3.27 

7.22 

7.85 

(112) 7.01 4.72 5.71 0.16 M10x17 1.25 2.36 1.88 0.37 1.36 0.25 3.27 7.82 

(132) 8.43 6.3 7.24 0.14 M16x22 1.375 3.15 2.75 0.2 1.51 0.313 6.61 11.15 

(71) 5.35 3.74 4.57 0.16 M8x14 0.625 1.57 1.25 0.17 0.7 0.188 2.4 6.18 

- 68 - - -A5 

(80) 

(90) 

5.51 

5.51 

3.74 

3.74 

4.57 

4.57 

0.16 

0.16 

M8x14 

M8x14 

0.75 

0.875 

1.57 

1.97 

1.25 

1.5 

0.17 

0.27 

0.83 

0.96 

0.188 

0.188 

2.4 

2.8 

7.56 

7.95 

(100) 6.85 4.72 5.71 0.16 M10x17 1.125 2.36 1.88 0.29 1.24 0.25 3.27 8.58 

7 - 22 

BD1≥13.46 


BD1≥8.43 

BD1≤11.65 

BD1≤7.01 

[inch] 

A5 

[inch]

[ 

Input Unit A5 

BD1≥13.46 


Gear Units 


(71) 136 95 116 4 M8x14 15,875 40 31,75 4,25 17,9 4,763 61 125,5 

- - B38 38B -A5 

(80) 

(90) 

140 

140 

95 

95 

116 

116 

4 

4 

M8x14 

M8x14 

19,05 

22,225 

40 

50 

31,75 

38,1 

4,25 

6,9 

21,15 

24,35 

4,763 

4,763 

61 

71 

160,5 

170,5 

(100) 174 120 145 4 M10x17 28,575 60 47,63 7,37 31,4 6,35 83 

(71) 136 95 116 4 M8x14 15,875 40 31,75 4,25 17,9 4,763 61 150,5 

38 - 38/48 48B -A5 

(80) 

(90) 

140 

140 

95 

95 

116 

116 

4 

4 

M8x14 

M8x14 

19,05 

22,225 

40 

50 

31,75 

38,1 

4,25 

6,9 

21,15 

24,35 

4,763 

4,763 

61 

71 

185,5 

195,5 

(100) 174 120 145 4 M10x17 28,575 60 47,63 7,37 31,4 6,35 83 211,5 

(71) 136 95 116 4 M8x14 15,875 40 31,75 4,25 17,9 4,763 61 165,5 

- 38 - - -A5 (80) 140 95 116 4 M8x14 19,05 40 31,75 4,25 21,15 4,763 61 200,5 

(90) 140 95 116 4 M8x14 22,225 50 38,1 6,9 24,35 4,763 71 210,5 

(71) 136 95 116 4 M8x14 15,875 40 31,75 4,25 17,9 4,763 61 145 

(80) 140 95 116 4 M8x14 19,05 40 31,75 4,25 21,15 4,763 61 180 

48 - 68 68B -A5 (90) 140 95 116 4 M8x14 22,225 50 38,1 6,9 24,35 4,763 71 190 

(100) 174 120 145 4 M10x17 28,575 60 47,63 7,37 31,4 6,35 83 206 

(112) 178 120 145 4 M10x17 31,75 60 55,56 1,44 35,27 7,938 83 207 

(71) 136 95 116 4 M8x14 15,875 40 31,75 4,25 17,9 4,763 61 162 

- 48 - - -A5 

(80) 

(90) 

140 

140 

95 

95 

116 

116 

4 

4 

M8x14 

M8x14 

19,05 

22,225 

40 

50 

31,75 

38,1 

4,25 

6,9 

21,15 

24,35 

4,763 

4,763 

61 

71 

197 

207 

(100) 174 120 145 4 M10x17 28,575 60 47,63 7,37 31,4 6,35 83 223 

(71) 136 95 116 4 M8x14 15,875 40 31,75 4,25 17,9 4,763 61 139 

(80) 140 95 116 4 M8x14 19,05 40 31,75 4,25 21,15 4,763 61 174 

68 - 88 88B 

(90) 

-A5 

(100) 

140 

174 

95 

120 

116 

145 

4 

4 

M8x14 

M10x17 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

71 

83 

184 

200 

(112) 178 120 145 4 M10x17 31,75 60 55,56 1,44 35,27 7,938 83 199 

(132) 214 160 184 3,5 M16x22 34,925 80 69,85 5,15 38,44 7,938 168 283,5 

(71) 136 95 116 4 M8x14 15,875 40 31,75 4,25 17,9 4,763 61 157,5 

- 68 - - -A5 

(80) 

(90) 

140 

140 

95 

95 

116 

116 

4 

4 

M8x14 

M8x14 

19,05 

22,225 

40 

50 

31,75 

38,1 

4,25 

6,9 

21,15 

24,35 

4,763 

4,763 

61 

71 

192,5 

202,5 

(100) 174 120 145 4 M10x17 28,575 60 47,63 7,37 31,4 6,35 83 218,5 


BD1≥8.43 

BD1≤11.65 

BD1≤7.01 

A5 

[mm] 

7 - 23 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


[ 

Input Unit A5 

Gear Units 


(90) 5.51 3.74 4.57 0.16 M8x14 0.875 1.97 1.5 0.27 0.96 0.188 2.8 6.63 

(100) 6.85 4.72 5.71 0.16 M10x17 1.125 2.36 1.88 0.29 1.24 0.25 3.27 7.16 

88 - 108 108B -A5 (112) 7.01 4.72 5.71 0.16 M10x17 1.25 2.36 1.88 0.37 1.36 0.25 3.27 7.09 

(132) 8.43 6.3 7.24 0.14 M16x22 1.375 3.15 2.75 0.2 1.51 0.313 6.61 10.42 

(160) 9.88 6.3 7.24 0.2 M16x28 1.625 4.33 3.09 0.64 1.79 0.375 8.46 12.12 

(71) 5.35 3.74 4.57 0.16 M8x14 0.625 1.57 1.25 0.17 0.7 0.188 2.4 5.85 

(80) 5.51 3.74 4.57 0.16 M8x14 0.75 1.57 1.25 0.17 0.83 0.188 2.4 7.23 

- 88 - - -A5 

(90) 

(100) 

5.51 

6.85 

3.74 

4.72 

4.57 

5.71 

0.16 

0.16 

M8x14 

M10x17 

0.875 

1.125 

1.97 

2.36 

1.5 

1.88 

0.27 

0.29 

0.96 

1.24 

0.188 

0.25 

2.8 

3.27 

7.62 

8.25 

(112) 7.01 4.72 5.71 0.16 M10x17 1.25 2.36 1.88 0.37 1.36 0.25 3.27 8.23 

(132) 8.43 6.3 7.24 0.14 M16x22 1.375 3.15 2.75 0.2 1.51 0.313 6.61 11.52 

(90) 5.51 3.74 4.57 0.16 M8x14 0.875 1.97 1.5 0.27 0.96 0.188 2.8 6.18 

(100) 6.85 4.72 5.71 0.16 M10x17 1.125 2.36 1.88 0.29 1.24 0.25 3.27 6.69 

108 - 128 128B -A5 

(112) 

(132) 

7.01 

8.43 

4.72 

6.3 

5.71 

7.24 

0.16 

0.14 

M10x17 

M16x22 

1.25 

1.375 

2.36 

3.15 

1.88 

2.75 

0.37 

0.2 

1.36 

1.51 

0.25 

0.313 

3.27 

6.61 

6.64 

9.93 

(160) 9.88 6.3 7.24 0.2 M16x28 1.625 4.33 3.09 0.64 1.79 0.375 8.46 11.67 

(200) 11.65 7.68 9.06 0.2 M16x28 2.125 4.33 3.5 0.44 2.35 0.5 9.25 12.48 

(80) 5.51 3.74 4.57 0.16 M8x14 0.75 1.57 1.25 0.17 0.83 0.188 2.4 6.99 

(90) 5.51 3.74 4.57 0.16 M8x14 0.875 1.97 1.5 0.27 0.96 0.188 2.8 7.38 

- 108 - - -A5 

(100) 

(112) 

6.85 

7.01 

4.72 

4.72 

5.71 

5.71 

0.16 

0.16 

M10x17 

M10x17 

1.125 

1.25 

2.36 

2.36 

1.88 

1.88 

0.29 

0.37 

1.24 

1.36 

0.25 

0.25 

3.27 

3.27 

8.01 

7.88 

(132) 8.43 6.3 7.24 0.14 M16x22 1.375 3.15 2.75 0.2 1.51 0.313 6.61 11.21 

(160) 9.88 6.3 7.24 0.2 M16x28 1.625 4.33 3.09 0.64 1.79 0.375 8.46 12.83 

(100) 6.85 4.72 5.71 0.16 M10x17 1.125 2.36 1.88 0.29 1.24 0.25 3.27 6.32 

(112) 7.01 4.72 5.71 0.16 M10x17 1.25 2.36 1.88 0.37 1.36 0.25 3.27 6.22 

128 - 148 148B -A5 

(132) 

(160) 

8.43 

9.88 

6.3 

6.3 

7.24 

7.24 

0.14 

0.2 

M16x22 

M16x28 

1.375 

1.625 

3.15 

4.33 

2.75 

3.09 

0.2 

0.64 

1.51 

1.79 

0.313 

0.375 

6.61 

8.46 

9.51 

11.02 

(200) 11.65 7.68 9.06 0.2 M16x28 2.125 4.33 3.5 0.44 2.35 0.5 9.25 11.95 

(225) 13.46 9.84 11.81 0.2 M16x22 2.125 5.51 3.5 0.44 2.35 0.5 10.2 14.21 

(90) 5.51 3.74 4.57 0.16 M8x14 0.875 1.97 1.5 0.27 0.96 0.188 2.8 7.1 

(100) 6.85 4.72 5.71 0.16 M10x17 1.125 2.36 1.88 0.29 1.24 0.25 3.27 7.73 

- 128 - - -A5 

(112) 

(132) 

7.01 

8.43 

4.72 

6.3 

5.71 

7.24 

0.16 

0.14 

M10x17 

M16x22 

1.25 

1.375 

2.36 

3.15 

1.88 

2.75 

0.37 

0.2 

1.36 

1.51 

0.25 

0.313 

3.27 

6.61 

7.56 

10.85 

(160) 9.88 6.3 7.24 0.2 M16x28 1.625 4.33 3.09 0.64 1.79 0.375 8.46 12.48 

(200) 11.65 7.68 9.06 0.2 M16x28 2.125 4.33 3.5 0.44 2.35 0.5 9.25 13.41 


7 - 24 

BD1≥13.46 

BD1≥8.43 

BD1≤11.65 

BD1≤7.01 

A5 

[inch]

Input Unit A5 

BD1≥13.46 


Gear Units 


(90) 140 95 116 4 M8x14 22,225 50 38,1 6,9 24,35 4,763 71 169 

(100) 174 120 145 4 M10x17 28,575 60 47,63 7,37 31,4 6,35 83 182,5 

88 - 108 108B -A5 (112) 178 120 145 4 M10x17 31,75 60 55,56 1,44 35,27 7,938 83 180,5 

(132) 214 160 184 3,5 M16x22 34,925 80 69,85 5,15 38,44 7,938 168 265 

(160) 251 160 184 5 M16x28 41,275 110 78,58 16,24 45,45 9,53 215 308,5 

(71) 136 95 116 4 M8x14 15,875 40 31,75 4,25 17,9 4,763 61 149 

(80) 140 95 116 4 M8x14 19,05 40 31,75 4,25 21,15 4,763 61 184 

- 88 - - 

(90) 

-A5 

(100) 

140 

174 

95 

120 

116 

145 

4 

4 

M8x14 

M10x17 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

71 

83 

194 

210 

(112) 178 120 145 4 M10x17 31,75 60 55,56 1,44 35,27 7,938 83 209,5 

(132) 214 160 184 3,5 M16x22 34,925 80 69,85 5,15 38,44 7,938 168 293 

(90) 140 95 116 4 M8x14 22,225 50 38,1 6,9 24,35 4,763 71 157,5 

(100) 174 120 145 4 M10x17 28,575 60 47,63 7,37 31,4 6,35 83 170,5 

108 - 128 128B 

(112) 

-A5 

(132) 

178 

214 

120 

160 

145 

184 

4 

3,5 

M10x17 

M16x22 

31,75 

34,925 

60 

80 

55,56 

69,85 

1,44 

5,15 

35,27 

38,44 

7,938 

7,938 

83 

168 

169 

252,5 

(160) 251 160 184 5 M16x28 41,275 110 78,58 16,24 45,45 9,53 215 297 

(200) 296 195 230 5 M16x28 53,975 110 88,9 11,1 59,58 12,7 235 317,5 

(80) 140 95 116 4 M8x14 19,05 40 31,75 4,25 21,15 4,763 61 178 

(90) 140 95 116 4 M8x14 22,225 50 38,1 6,9 24,35 4,763 71 188 

- 108 - - 

(100) 

-A5 

(112) 

174 

178 

120 

120 

145 

145 

4 

4 

M10x17 

M10x17 

28,575 

31,75 

60 

60 

47,63 

55,56 

7,37 

1,44 

31,4 

35,27 

6,35 

7,938 

83 

83 

204 

200,5 

(132) 214 160 184 3,5 M16x22 34,925 80 69,85 5,15 38,44 7,938 168 285 

(160) 251 160 184 5 M16x28 41,275 110 78,58 16,24 45,45 9,53 215 326,5 

(100) 174 120 145 4 M10x17 28,575 60 47,63 7,37 31,4 6,35 83 161 

(112) 178 120 145 4 M10x17 31,75 60 55,56 1,44 35,27 7,938 83 158,5 

128 - 148 148B 

(132) 

-A5 

(160) 

214 

251 

160 

160 

184 

184 

3,5 

5 

M16x22 

M16x28 

34,925 

41,275 

80 

110 

69,85 

78,58 

5,15 

16,24 

38,44 

45,45 

7,938 

9,53 

168 

215 

242 

280,5 

(200) 296 195 230 5 M16x28 53,975 110 88,9 11,1 59,58 12,7 235 304 

(225) 342 250 300 5 M16x22 53,975 140 88,9 11,1 59,58 12,7 259 361,5 

(90) 140 95 116 4 M8x14 22,225 50 38,1 6,9 24,35 4,763 71 181 

(100) 174 120 145 4 M10x17 28,575 60 47,63 7,37 31,4 6,35 83 197 

- 128 - - 

(112) 

-A5 

(132) 

178 

214 

120 

160 

145 

184 

4 

3,5 

M10x17 

M16x22 

31,75 

34,925 

60 

80 

55,56 

69,85 

1,44 

5,15 

35,27 

38,44 

7,938 

7,938 

83 

168 

192,5 

276 

(160) 251 160 184 5 M16x28 41,275 110 78,58 16,24 45,45 9,53 215 317,5 

(200) 296 195 230 5 M16x28 53,975 110 88,9 11,1 59,58 12,7 235 341 


BD1≥8.43 

BD1≤11.65 

BD1≤7.01 

A5 

[mm] 

7 - 25 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Input Unit A5 

Gear Units 


(132) 8.43 6.3 7.24 0.14 M16x22 1.375 3.15 2.75 0.2 1.51 0.313 6.61 9.2 

(160) 9.88 6.3 7.24 0.2 M16x28 1.625 4.33 3.09 0.64 1.79 0.375 8.46 10.73 

148 - 168 168B -A5 (200) 11.65 7.68 9.06 0.2 M16x28 2.125 4.33 3.5 0.44 2.35 0.5 9.25 11.65 

(225) 13.46 9.84 11.81 0.2 M16x22 2.125 5.51 3.5 0.44 2.35 0.5 10.2 13.92 

(250) 15.59 9.84 11.81 0.2 M16x22 2.375 5.51 4.25 0.67 2.65 0.625 10.2 13.9 

(100) 6.85 4.72 5.71 0.16 M10x17 1.125 2.36 1.88 0.29 1.24 0.25 3.27 7.54 

(112) 7.01 4.72 5.71 0.16 M10x17 1.25 2.36 1.88 0.37 1.36 0.25 3.27 7.44 

- 148 - - -A5 

(132) 

(160) 

8.43 

9.88 

6.3 

6.3 

7.24 

7.24 

0.14 

0.2 

M16x22 

M16x28 

1.375 

1.625 

3.15 

4.33 

2.75 

3.09 

0.2 

0.64 

1.51 

1.79 

0.313 

0.375 

6.61 

8.46 

10.69 

12.22 

(200) 11.65 7.68 9.06 0.2 M16x28 2.125 4.33 3.5 0.44 2.35 0.5 9.25 13.15 

(225) 13.46 9.84 11.81 0.2 M16x22 2.125 5.51 3.5 0.44 2.35 0.5 10.2 15.41 

(132) 8.43 6.3 7.24 0.14 M16x22 1.375 3.15 2.75 0.2 1.51 0.313 6.61 8.63 

(160) 9.88 6.3 7.24 0.2 M16x28 1.625 4.33 3.09 0.64 1.79 0.375 8.46 10.16 

168 - 188 188B -A5 (200) 11.65 7.68 9.06 0.2 M16x28 2.125 4.33 3.5 0.44 2.35 0.5 9.25 11.08 

(225) 13.46 9.84 11.81 0.2 M16x22 2.125 5.51 3.5 0.44 2.35 0.5 10.2 13.35 

(250) 15.59 9.84 11.81 0.2 M16x22 2.375 5.51 4.25 0.67 2.65 0.625 10.2 13.33 

(132) 8.43 6.3 7.24 0.14 M16x22 1.375 3.15 2.75 0.2 1.51 0.313 6.61 10.24 

- 168 - - -A5 

(160) 

(200) 

9.88 

11.65 

6.3 

7.68 

7.24 

9.06 

0.2 

0.2 

M16x28 

M16x28 

1.625 

2.125 

4.33 

4.33 

3.09 

3.5 

0.64 

0.44 

1.79 

2.35 

0.375 

0.5 

8.46 

9.25 

11.77 

12.7 

(225) 13.46 9.84 11.81 0.2 M16x22 2.125 5.51 3.5 0.44 2.35 0.5 10.2 14.48 

(160) 9.88 6.3 7.24 0.2 M16x28 1.625 4.33 3.09 0.64 1.79 0.375 8.46 10.16 

188 - - - -A5 

(200) 

(225) 

11.65 

13.46 

7.68 

9.84 

9.06 

11.81 

0.2 

0.2 

M16x28 

M16x22 

2.125 

2.125 

4.33 

5.51 

3.5 

3.5 

0.44 

0.44 

2.35 

2.35 

0.5 

0.5 

9.25 

10.2 

11.08 

13.35 

(250) 15.59 9.84 11.81 0.2 M16x22 2.375 5.51 4.25 0.67 2.65 0.625 10.2 13.33 

(132) 8.43 6.3 7.24 0.14 M16x22 1.375 3.15 2.75 0.2 1.51 0.313 6.61 8.63 

(160) 9.88 6.3 7.24 0.2 M16x28 1.625 4.33 3.09 0.64 1.79 0.375 8.46 10.16 

- 188 - - -A5 (200) 11.65 7.68 9.06 0.2 M16x28 2.125 4.33 3.5 0.44 2.35 0.5 9.25 11.08 

(225) 13.46 9.84 11.81 0.2 M16x22 2.125 5.51 3.5 0.44 2.35 0.5 10.2 13.35 

(250) 15.59 9.84 11.81 0.2 M16x22 2.375 5.51 4.25 0.67 2.65 0.625 10.2 13.33 


7 - 26 

BD1≥13.46 

BD1≥8.43 

BD1≤11.65 

BD1≤7.01 

A5 

[inch]

[ 

Input Unit A5 

BD1≥13.46 


Gear Units 


(132) 214 160 184 3,5 M16x22 34,925 80 69,85 5,15 38,44 7,938 168 234 

(160) 251 160 184 5 M16x28 41,275 110 78,58 16,24 45,45 9,53 215 273 

148 - 168 168B -A5 (200) 296 195 230 5 M16x28 53,975 110 88,9 11,1 59,58 12,7 235 296,5 

(225) 342 250 300 5 M16x22 53,975 140 88,9 11,1 59,58 12,7 259 354 

(250) 396 250 300 5 M16x22 60,325 140 107,95 17,05 67,36 15,875 259 353,5 

(100) 174 120 145 4 M10x17 28,575 60 47,63 7,37 31,4 6,35 83 192 

(112) 178 120 145 4 M10x17 31,75 60 55,56 1,44 35,27 7,938 83 189,5 

- 148 - - 

(132) 

-A5 

(160) 

214 

251 

160 

160 

184 

184 

3,5 

5 

M16x22 

M16x28 

34,925 

41,275 

80 

110 

69,85 

78,58 

5,15 

16,24 

38,44 

45,45 

7,938 

9,53 

168 

215 

272 

311 

(200) 296 195 230 5 M16x28 53,975 110 88,9 11,1 59,58 12,7 235 334,5 

(225) 342 250 300 5 M16x22 53,975 140 88,9 11,1 59,58 12,7 259 392 

(132) 214 160 184 3,5 M16x22 34,925 80 69,85 5,15 38,44 7,938 168 219,5 

(160) 251 160 184 5 M16x28 41,275 110 78,58 16,24 45,45 9,53 215 258,5 

168 - 188 188B -A5 (200) 296 195 230 5 M16x28 53,975 110 88,9 11,1 59,58 12,7 235 282 

(225) 342 250 300 5 M16x22 53,975 140 88,9 11,1 59,58 12,7 259 339,5 

(250) 396 250 300 5 M16x22 60,325 140 107,95 17,05 67,36 15,875 259 339 

(132) 214 160 184 3,5 M16x22 34,925 80 69,85 5,15 38,44 7,938 168 260,5 

- 168 - - 

(160) 

-A5 

(200) 

251 

296 

160 

195 

184 

230 

5 

5 

M16x28 

M16x28 

41,275 

53,975 

110 

110 

78,58 

88,9 

16,24 

11,1 

45,45 

59,58 

9,53 

12,7 

215 

235 

299,5 

323 

(225) 342 250 300 5 M16x22 53,975 140 88,9 11,1 59,58 12,7 259 380,5 

(160) 251 160 184 5 M16x28 41,275 110 78,58 16,24 45,45 9,53 215 258,5 

188 - - - 

(200) 

-A5 

(225) 

296 

342 

195 

250 

230 

300 

5 

5 

M16x28 

M16x22 

53,975 

53,975 

110 

140 

88,9 

88,9 

11,1 

11,1 

59,58 

59,58 

12,7 

12,7 

235 

259 

282 

339,5 

(250) 396 250 300 5 M16x22 60,325 140 107,95 17,05 67,36 15,875 259 339 

(132) 214 160 184 3,5 M16x22 34,925 80 69,85 5,15 38,44 7,938 168 219,5 

(160) 251 160 184 5 M16x28 41,275 110 78,58 16,24 45,45 9,53 215 258,5 

- 188 - - -A5 (200) 296 195 230 5 M16x28 53,975 110 88,9 11,1 59,58 12,7 235 282 

(225) 342 250 300 5 M16x22 53,975 140 88,9 11,1 59,58 12,7 259 339,5 

(250) 396 250 300 5 M16x22 60,325 140 107,95 17,05 67,36 15,875 259 339 


BD1≥8.43 

BD1≤11.65 

BD1≤7.01 

A5 

[mm] 

7 - 27 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


7 - 28

Input unit P5 

Position of „piggy back“ 


Connection dimensions for surface cooled asynchronus motors, foot mounted acc. to NEMA MG-1 

Frame size 

143 

145 

182 

184 

213 

215 

254 

256 

286 

324 

326 

364 

365 

d 

[inch] 

[mm] 

9h 12h 3h 

l 

[inch] 

[mm] 

w1 

[inch] 

[mm] 

h 

[inch] 

[mm] 

a 

[inch] 

[mm] 

b 

[inch] 

[mm] 

7/8 2.25 2.25 3.5 4 5.5 

22,225 57,15 57,15 88,9 101,6 139,7 

7/8 2.25 2.25 3.5 5 5.5 

22,225 57,15 57,15 88,9 127 139,7 

1 1/8 2.5 2.75 4.5 4.5 3.75 

28,575 63,5 69,85 114,3 114,3 95,25 

1 1/8 2.5 2.75 4.5 5.5 3.75 

28,575 63,5 69,85 114,3 139,7 95,25 

1 3/8 3.125 3.5 5.25 5.5 4.25 

34,925 79,375 88,9 133,35 139,7 107,95 

1 3/8 3.125 3.5 5.25 7 4.25 

34,925 79,375 88,9 133,35 177,8 107,95 

1 5/8 3.75 4.25 6.25 8.5 5 

41,275 95,25 107,95 158,75 215,9 127 

1 5/8 3.75 4.25 6.25 10 5 

41,275 95,25 107,95 158,75 254 127 

1 7/8 3 4.75 7 11 5.5 

47,625 76,2 120,65 177,8 279,4 139,7 

2 1/8 5 5.25 8 10.5 6.25 

53,975 127 133,35 203,2 266,7 158,75 

2 1/8 3.5 5.25 8 12 6.25 

53,975 88,9 133,35 203,2 304,8 158,75 

2 3/8 5.625 5.875 9 11.25 7 

60,325 142,875 149,225 228,6 285,75 177,8 

2 3/8 3.5 5.875 9 12.25 7 

60,325 88,9 149,225 228,6 311,15 177,8 

7 - 29 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Input Unit P5 

12h 3/9h 

Gear Units BD1 PE PW PF PH0 PH1 PH1 PH0 PH1 PH1 FU1 V1 V5 V01 FZ1 FY1 PN AG1 

max min max max min max 

(143) 5.51 8.86 6.85 2.09 3.46 5.12 8.86 3.46 5.12 8.86 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.69 

F.38B 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.12 

5.71 

8.86 

9.45 

3.46 

3.46 

5.12 

5.71 

8.86 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

6.69 

7.32 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 5.71 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.32 

(143) 5.51 8.86 6.85 2.09 3.46 5.12 9.25 3.46 5.12 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.67 

E.38 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.12 

5.71 

9.25 

9.45 

3.46 

3.46 

5.12 

5.71 

9.25 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.67 

8.3 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 5.71 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.3 

(143) 5.51 8.86 6.85 2.09 3.46 5.12 9.25 3.46 5.12 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.67 

Z.38 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.12 

5.71 

9.25 

9.45 

3.46 

3.46 

5.12 

5.71 

9.25 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.67 

8.3 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 5.71 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.3 

(143) 5.51 8.86 6.85 2.09 3.46 5.12 9.25 3.46 5.12 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.67 

K.38 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.12 

5.71 

9.25 

9.45 

3.46 

3.46 

5.12 

5.71 

9.25 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.67 

8.3 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 5.71 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.3 

(143) 5.51 8.86 6.85 2.09 3.46 5.12 9.25 3.46 5.51 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.67 

K.48 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.12 

5.71 

9.25 

9.45 

3.46 

3.46 

5.51 

5.71 

9.25 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.67 

8.3 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 5.71 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.3 

(143) 5.51 8.86 6.85 2.09 3.46 5.12 9.25 3.46 5.12 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.67 

C.38 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.12 

5.71 

9.25 

9.45 

3.46 

3.46 

5.12 

5.71 

9.25 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.67 

8.3 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 5.71 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.3 

(143) 5.51 8.86 6.85 2.09 3.46 5.31 9.25 3.46 5.51 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.67 

C.48 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.31 

5.71 

9.25 

9.45 

3.46 

3.46 

5.51 

5.71 

9.25 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.67 

8.3 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 5.71 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.3 

D.38 

(143) 5.51 

-P5 

(145) 5.51 

8.86 

8.86 

6.85 

6.85 

2.09 

2.09 

3.46 

3.46 

5.12 

5.12 

9.25 

9.25 

3.46 

3.46 

5.12 

5.12 

9.25 

9.25 

0.88 1.97 

0.88 1.97 

1.5 

1.5 

0.27 0.96 0.19 2.48 

0.27 0.96 0.19 2.48 

8.27 

8.27 

(143) 5.51 8.86 6.85 2.09 3.46 5.12 9.25 3.46 5.51 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.46 

E.48 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.12 

5.71 

9.25 

9.45 

3.46 

3.46 

5.51 

5.71 

9.25 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.46 

8.09 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 5.71 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.09 


7 - 30 

P5 

[inch]

Input Unit P5 


12h 3/9h 



(143) 140 225 174 53 88 130 225 88 130 225 22,225 50 38,1 6,9 24,35 4,763 63 170,5 

F.38B 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

130 

145 

225 

240 

88 

88 

130 

145 

225 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

170,5 

186,5 

(184) 174 250 232 60 88 145 240 88 145 240 28,575 60 47,63 7,37 31,4 6,35 73 186,5 

(143) 140 225 174 53 88 130 235 88 130 235 22,225 50 38,1 6,9 24,35 4,763 63 195,5 

E.38 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

130 

145 

235 

240 

88 

88 

130 

145 

235 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

195,5 

211,5 

(184) 174 250 232 60 88 145 240 88 145 240 28,575 60 47,63 7,37 31,4 6,35 73 211,5 

(143) 140 225 174 53 88 130 235 88 130 235 22,225 50 38,1 6,9 24,35 4,763 63 195,5 

Z.38 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

130 

145 

235 

240 

88 

88 

130 

145 

235 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

195,5 

211,5 

(184) 174 250 232 60 88 145 240 88 145 240 28,575 60 47,63 7,37 31,4 6,35 73 211,5 

(143) 140 225 174 53 88 130 235 88 130 235 22,225 50 38,1 6,9 24,35 4,763 63 195,5 

K.38 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

130 

145 

235 

240 

88 

88 

130 

145 

235 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

195,5 

211,5 

(184) 174 250 232 60 88 145 240 88 145 240 28,575 60 47,63 7,37 31,4 6,35 73 211,5 

(143) 140 225 174 53 88 130 235 88 140 235 22,225 50 38,1 6,9 24,35 4,763 63 195,5 

K.48 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

130 

145 

235 

240 

88 

88 

140 

145 

235 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

195,5 

211,5 

(184) 174 250 232 60 88 145 240 88 145 240 28,575 60 47,63 7,37 31,4 6,35 73 211,5 

(143) 140 225 174 53 88 130 235 88 130 235 22,225 50 38,1 6,9 24,35 4,763 63 195,5 

C.38 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

130 

145 

235 

240 

88 

88 

130 

145 

235 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

195,5 

211,5 

(184) 174 250 232 60 88 145 240 88 145 240 28,575 60 47,63 7,37 31,4 6,35 73 211,5 

(143) 140 225 174 53 88 135 235 88 140 235 22,225 50 38,1 6,9 24,35 4,763 63 195,5 

C.48 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

135 

145 

235 

240 

88 

88 

140 

145 

235 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

195,5 

211,5 

(184) 174 250 232 60 88 145 240 88 145 240 28,575 60 47,63 7,37 31,4 6,35 73 211,5 

D.38 

(143) 140 

-P5 

(145) 140 

225 

225 

174 

174 

53 

53 

88 

88 

130 

130 

235 

235 

88 

88 

130 

130 

235 

235 

22,225 

22,225 

50 

50 

38,1 

38,1 

6,9 

6,9 

24,35 

24,35 

4,763 

4,763 

63 

63 

210,5 

210,5 

(143) 140 225 174 53 88 130 235 88 140 235 22,225 50 38,1 6,9 24,35 4,763 63 190 

E.48 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

130 

145 

235 

240 

88 

88 

140 

145 

235 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

190 

206 

(184) 174 250 232 60 88 145 240 88 145 240 28,575 60 47,63 7,37 31,4 6,35 73 206 


P5 

[mm] 

7 - 31 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


[ 

Input Unit P5 

12h 3/9h 



(143) 5.51 8.86 6.85 2.09 3.46 5.12 9.25 3.46 5.51 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.46 

Z.48 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.12 

5.71 

9.25 

9.45 

3.46 

3.46 

5.51 

5.71 

9.25 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.46 

8.09 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 5.71 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.09 

(143) 5.51 8.86 6.85 2.09 3.46 5.12 9.25 3.46 5.51 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 8.13 

D.48 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.12 

5.71 

9.25 

9.45 

3.46 

3.46 

5.51 

5.71 

9.25 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

8.13 

8.76 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 5.71 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.76 

(143) 5.51 8.86 6.85 2.09 3.46 5.12 8.86 3.46 5.12 8.86 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.67 

F.48B 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.12 

5.71 

8.86 

9.45 

3.46 

3.46 

5.12 

5.71 

8.86 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.67 

8.3 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 5.71 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.3 

(143) 5.51 8.86 6.85 2.09 3.46 5.51 9.25 3.46 5.12 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.22 

(145) 5.51 8.86 6.85 2.09 3.46 5.51 9.25 3.46 5.12 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.22 

E.68 

(182) 6.85 

-P5 

(184) 6.85 

9.84 

9.84 

9.13 

9.13 

2.36 

2.36 

3.46 

3.46 

5.91 

5.91 

9.45 

9.45 

3.46 

3.46 

5.91 

5.91 

9.45 

9.45 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.85 

7.85 

(213) 8.43 14.72 11.81 3.31 8.23 7.09 10.63 7.24 7.09 10.63 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.15 

(215) 8.43 14.72 11.81 3.31 8.23 7.09 10.63 7.24 7.09 10.63 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.15 

(143) 5.51 8.86 6.85 2.09 3.46 5.51 9.25 3.46 6.3 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.95 

D.68 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.51 

5.71 

9.25 

9.45 

3.46 

3.46 

6.3 

6.3 

9.25 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.95 

8.58 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 6.3 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.58 

(143) 5.51 8.86 6.85 2.09 3.46 5.51 9.25 3.46 6.3 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.22 

(145) 5.51 8.86 6.85 2.09 3.46 5.51 9.25 3.46 6.3 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.22 

Z.68 

(182) 6.85 

-P5 

(184) 6.85 

9.84 

9.84 

9.13 

9.13 

2.36 

2.36 

3.46 

3.46 

5.71 

5.71 

9.45 

9.45 

3.46 

3.46 

6.3 

6.3 

9.45 

9.45 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.85 

7.85 

(213) 8.43 14.72 11.81 3.31 5.47 7.09 9.06 5.47 7.09 9.06 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.15 

(215) 8.43 14.72 11.81 3.31 5.47 7.09 9.06 5.47 7.09 9.06 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.15 

(143) 5.51 8.86 6.85 2.09 3.46 5.51 9.25 3.46 6.3 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.46 

K.68 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.51 

5.71 

9.25 

9.45 

3.46 

3.46 

6.3 

6.3 

9.25 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.46 

8.09 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 6.3 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.09 

(143) 5.51 8.86 6.85 2.09 3.46 5.51 8.86 3.46 5.51 8.86 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.46 

F.68B 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

5.51 

5.71 

8.86 

9.45 

3.46 

3.46 

5.51 

5.83 

8.86 

9.37 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.46 

8.09 

(184) 6.85 9.84 9.13 2.36 3.46 5.71 9.45 3.46 5.83 9.37 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.09 


7 - 32 

P5 

[inch]

Input Unit P5 


12h 3/9h 



(143) 140 225 174 53 88 130 235 88 140 235 22,225 50 38,1 6,9 24,35 4,763 63 190 

Z.48 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

130 

145 

235 

240 

88 

88 

140 

145 

235 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

190 

206 

(184) 174 250 232 60 88 145 240 88 145 240 28,575 60 47,63 7,37 31,4 6,35 73 206 

(143) 140 225 174 53 88 130 235 88 140 235 22,225 50 38,1 6,9 24,35 4,763 63 207 

D.48 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

130 

145 

235 

240 

88 

88 

140 

145 

235 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

207 

223 

(184) 174 250 232 60 88 145 240 88 145 240 28,575 60 47,63 7,37 31,4 6,35 73 223 

(143) 140 225 174 53 88 130 225 88 130 225 22,225 50 38,1 6,9 24,35 4,763 63 195,5 

F.48B 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

130 

145 

225 

240 

88 

88 

130 

145 

225 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

195,5 

211,5 

(184) 174 250 232 60 88 145 240 88 145 240 28,575 60 47,63 7,37 31,4 6,35 73 211,5 

(143) 140 225 174 53 88 140 235 88 130 235 22,225 50 38,1 6,9 24,35 4,763 63 184 

(145) 140 225 174 53 88 140 235 88 130 235 22,225 50 38,1 6,9 24,35 4,763 63 184 

E.68 

(182) 174 

-P5 

(184) 174 

250 

250 

232 

232 

60 

60 

88 

88 

150 

150 

240 

240 

88 

88 

150 

150 

240 

240 

28,575 

28,575 

60 

60 

47,63 

47,63 

7,37 

7,37 

31,4 

31,4 

6,35 

6,35 

73 

73 

200 

200 

(213) 214 374 300 84 209 180 270 184 180 270 34,925 80 69,85 5,15 38,44 7,938 85 283,5 

(215) 214 374 300 84 209 180 270 184 180 270 34,925 80 69,85 5,15 38,44 7,938 85 283,5 

(143) 140 225 174 53 88 140 235 88 160 235 22,225 50 38,1 6,9 24,35 4,763 63 202,5 

D.68 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

140 

145 

235 

240 

88 

88 

160 

160 

235 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

202,5 

218,5 

(184) 174 250 232 60 88 145 240 88 160 240 28,575 60 47,63 7,37 31,4 6,35 73 218,5 

(143) 140 225 174 53 88 140 235 88 160 235 22,225 50 38,1 6,9 24,35 4,763 63 184 

(145) 140 225 174 53 88 140 235 88 160 235 22,225 50 38,1 6,9 24,35 4,763 63 184 

Z.68 

(182) 174 

-P5 

(184) 174 

250 

250 

232 

232 

60 

60 

88 

88 

145 

145 

240 

240 

88 

88 

160 

160 

240 

240 

28,575 

28,575 

60 

60 

47,63 

47,63 

7,37 

7,37 

31,4 

31,4 

6,35 

6,35 

73 

73 

200 

200 

(213) 214 374 300 84 139 180 230 139 180 230 34,925 80 69,85 5,15 38,44 7,938 85 283,5 

(215) 214 374 300 84 139 180 230 139 180 230 34,925 80 69,85 5,15 38,44 7,938 85 283,5 

(143) 140 225 174 53 88 140 235 88 160 235 22,225 50 38,1 6,9 24,35 4,763 63 190 

K.68 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

140 

145 

235 

240 

88 

88 

160 

160 

235 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

190 

206 

(184) 174 250 232 60 88 145 240 88 160 240 28,575 60 47,63 7,37 31,4 6,35 73 206 

(143) 140 225 174 53 88 140 225 88 140 225 22,225 50 38,1 6,9 24,35 4,763 63 190 

F.68B 

(145) 140 

-P5 

(182) 174 

225 

250 

174 

232 

53 

60 

88 

88 

140 

145 

225 

240 

88 

88 

140 

148 

225 

238 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

190 

206 

(184) 174 250 232 60 88 145 240 88 148 238 28,575 60 47,63 7,37 31,4 6,35 73 206 


P5 

[mm] 

7 - 33 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Input Unit P5 

7 - 34 

12h 3/9h 



(143) 5.51 8.86 6.85 2.09 3.46 6.69 9.25 3.46 5.51 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.46 

C.68 

(145) 5.51 

-P5 

(182) 6.85 

8.86 

9.84 

6.85 

9.13 

2.09 

2.36 

3.46 

3.46 

6.69 

6.89 

9.25 

9.45 

3.46 

3.46 

5.51 

5.71 

9.25 

9.45 

0.88 1.97 1.5 0.27 0.96 0.19 2.48 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.46 

8.09 

(184) 6.85 9.84 9.13 2.36 3.46 6.89 9.45 3.46 5.71 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.09 

(143) 5.51 8.86 6.85 2.09 3.46 6.5 9.25 3.46 6.3 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.63 

(145) 5.51 8.86 6.85 2.09 3.46 6.5 9.25 3.46 6.3 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.63 

(182) 6.85 9.84 9.13 2.36 3.46 6.3 9.45 3.46 6.3 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.16 

E.88 

(184) 6.85 

-P5 

(213) 8.43 

9.84 

14.72 

9.13 2.36 

11.81 3.31 

3.46 

5.47 

6.3 

7.87 

9.45 

10.63 

3.46 

5.47 

6.3 

7.09 

9.45 

10.63 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.16 

1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.42 

(215) 8.43 14.72 11.81 3.31 5.47 7.87 10.63 5.47 7.09 10.63 1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.42 

(254) 9.88 14.72 11.81 3.39 5.47 7.87 10.63 5.28 7.09 10.63 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.12 

(256) 9.88 14.72 11.81 3.39 5.47 7.87 10.63 5.28 7.09 10.63 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.12 

(143) 5.51 8.86 6.85 2.09 3.46 6.3 9.25 3.46 7.48 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.63 

(145) 5.51 8.86 6.85 2.09 3.46 6.3 9.25 3.46 7.48 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.63 

(182) 6.85 9.84 9.13 2.36 3.46 6.3 9.45 3.46 7.48 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.16 

Z.88 

(184) 6.85 

-P5 

(213) 8.43 

9.84 

14.72 

9.13 2.36 

11.81 3.31 

3.46 

6.06 

6.3 

7.09 

9.45 

9.06 

3.46 

4.88 

7.48 

8.66 

9.45 

10.63 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.16 

1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.42 

(215) 8.43 14.72 11.81 3.31 6.06 7.09 9.06 4.88 8.66 10.63 1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.42 

(254) 9.88 14.72 11.81 3.39 8.23 7.09 9.06 7.24 8.66 10.63 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.12 

(256) 9.88 14.72 11.81 3.39 8.23 7.09 9.06 7.24 8.66 10.63 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.12 

(143) 5.51 8.86 6.85 2.09 3.46 6.3 9.25 3.46 7.48 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.22 

(145) 5.51 8.86 6.85 2.09 3.46 6.3 9.25 3.46 7.48 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.22 

K.88 

(182) 6.85 

-P5 

(184) 6.85 

9.84 

9.84 

9.13 

9.13 

2.36 

2.36 

3.46 

3.46 

6.3 

6.3 

9.45 

9.45 

3.46 

3.46 

7.48 

7.48 

9.45 

9.45 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.85 

7.85 

(213) 8.43 14.72 11.81 3.31 5.47 7.09 9.06 5.47 7.09 9.06 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.15 

(215) 8.43 14.72 11.81 3.31 5.47 7.09 9.06 5.47 7.09 9.06 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.15 

(143) 5.51 8.86 6.85 2.09 3.46 6.42 8.98 3.46 6.61 8.98 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.22 

(145) 5.51 8.86 6.85 2.09 3.46 6.42 8.98 3.46 6.61 8.98 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.22 

F.88B 

(182) 6.85 

-P5 

(184) 6.85 

9.84 

9.84 

9.13 

9.13 

2.36 

2.36 

3.46 

3.46 

6.42 

6.42 

9.37 

9.37 

3.46 

3.46 

6.3 

6.3 

9.45 

9.45 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.85 

7.85 

(213) 8.43 14.72 11.81 3.31 5.39 7.01 8.98 5 7.4 8.98 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.15 

(215) 8.43 14.72 11.81 3.31 5.39 7.01 8.98 5 7.4 8.98 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.15 

(143) 5.51 8.86 6.85 2.09 3.46 7.87 9.25 3.46 5.91 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.22 

(145) 5.51 8.86 6.85 2.09 3.46 7.87 9.25 3.46 5.91 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.22 

C.88 

(182) 6.85 

-P5 

(184) 6.85 

9.84 

9.84 

9.13 

9.13 

2.36 

2.36 

3.46 

3.46 

7.87 

7.87 

9.45 

9.45 

3.46 

3.46 

5.71 

5.71 

9.45 

9.45 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 

7.85 

7.85 

(213) 8.43 14.72 11.81 3.31 5.47 8.66 10.63 5.28 8.66 10.63 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.15 

(215) 8.43 14.72 11.81 3.31 5.47 8.66 10.63 5.28 8.66 10.63 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.15 


P5 

[inch]

Input Unit P5 


12h 3/9h 



(143) 140 225 174 53 88 170 235 88 140 235 22,225 50 38,1 6,9 24,35 4,763 63 190 

C.68 

(145) 140 

-P5 

(182) 174 

225 

250 

174 53 

232 60 

88 

88 

170 

175 

235 

240 

88 

88 

140 

145 

235 

240 

22,225 

28,575 

50 

60 

38,1 

47,63 

6,9 

7,37 

24,35 

31,4 

4,763 

6,35 

63 

73 

190 

206 

(184) 174 250 232 60 88 175 240 88 145 240 28,575 60 47,63 7,37 31,4 6,35 73 206 

(143) 140 225 174 53 88 165 235 88 160 235 22,225 50 38,1 6,9 24,35 4,763 63 169 

(145) 140 225 174 53 88 165 235 88 160 235 22,225 50 38,1 6,9 24,35 4,763 63 169 

(182) 174 250 232 60 88 160 240 88 160 240 28,575 60 47,63 7,37 31,4 6,35 73 182,5 

E.88 

(184) 174 

-P5 

(213) 214 

250 

374 

232 60 

300 84 

88 

139 

160 

200 

240 

270 

88 

139 

160 

180 

240 

270 

28,575 

34,925 

60 

80 

47,63 

69,85 

7,37 

5,15 

31,4 

38,44 

6,35 

7,938 

73 

85 

182,5 

265 

(215) 214 374 300 84 139 200 270 139 180 270 34,925 80 69,85 5,15 38,44 7,938 85 265 

(254) 251 374 300 86 139 200 270 134 180 270 41,275 110 78,58 16,24 45,45 9,53 132 308,5 

(256) 251 374 300 86 139 200 270 134 180 270 41,275 110 78,58 16,24 45,45 9,53 132 308,5 

(143) 140 225 174 53 88 160 235 88 190 235 22,225 50 38,1 6,9 24,35 4,763 63 169 

(145) 140 225 174 53 88 160 235 88 190 235 22,225 50 38,1 6,9 24,35 4,763 63 169 

(182) 174 250 232 60 88 160 240 88 190 240 28,575 60 47,63 7,37 31,4 6,35 73 182,5 

Z.88 

(184) 174 

-P5 

(213) 214 

250 

374 

232 60 

300 84 

88 

154 

160 

180 

240 

230 

88 

124 

190 

220 

240 

270 

28,575 

34,925 

60 

80 

47,63 

69,85 

7,37 

5,15 

31,4 

38,44 

6,35 

7,938 

73 

85 

182,5 

265 

(215) 214 374 300 84 154 180 230 124 220 270 34,925 80 69,85 5,15 38,44 7,938 85 265 

(254) 251 374 300 86 209 180 230 184 220 270 41,275 110 78,58 16,24 45,45 9,53 132 308,5 

(256) 251 374 300 86 209 180 230 184 220 270 41,275 110 78,58 16,24 45,45 9,53 132 308,5 

(143) 140 225 174 53 88 160 235 88 190 235 22,225 50 38,1 6,9 24,35 4,763 63 184 

(145) 140 225 174 53 88 160 235 88 190 235 22,225 50 38,1 6,9 24,35 4,763 63 184 

K.88 

(182) 174 

-P5 

(184) 174 

250 

250 

232 60 

232 60 

88 

88 

160 

160 

240 

240 

88 

88 

190 

190 

240 

240 

28,575 

28,575 

60 

60 

47,63 

47,63 

7,37 

7,37 

31,4 

31,4 

6,35 

6,35 

73 

73 

200 

200 

(213) 214 374 300 84 139 180 230 139 180 230 34,925 80 69,85 5,15 38,44 7,938 85 283,5 

(215) 214 374 300 84 139 180 230 139 180 230 34,925 80 69,85 5,15 38,44 7,938 85 283,5 

(143) 140 225 174 53 88 163 228 88 168 228 22,225 50 38,1 6,9 24,35 4,763 63 184 

(145) 140 225 174 53 88 163 228 88 168 228 22,225 50 38,1 6,9 24,35 4,763 63 184 

F.88B 

(182) 174 

-P5 

(184) 174 

250 

250 

232 60 

232 60 

88 

88 

163 

163 

238 

238 

88 

88 

160 

160 

240 

240 

28,575 

28,575 

60 

60 

47,63 

47,63 

7,37 

7,37 

31,4 

31,4 

6,35 

6,35 

73 

73 

200 

200 

(213) 214 374 300 84 137 178 228 127 188 228 34,925 80 69,85 5,15 38,44 7,938 85 283,5 

(215) 214 374 300 84 137 178 228 127 188 228 34,925 80 69,85 5,15 38,44 7,938 85 283,5 

(143) 140 225 174 53 88 200 235 88 150 235 22,225 50 38,1 6,9 24,35 4,763 63 184 

(145) 140 225 174 53 88 200 235 88 150 235 22,225 50 38,1 6,9 24,35 4,763 63 184 

C.88 

(182) 174 

-P5 

(184) 174 

250 

250 

232 60 

232 60 

88 

88 

200 

200 

240 

240 

88 

88 

145 

145 

240 

240 

28,575 

28,575 

60 

60 

47,63 

47,63 

7,37 

7,37 

31,4 

31,4 

6,35 

6,35 

73 

73 

200 

200 

(213) 214 374 300 84 139 220 270 134 220 270 34,925 80 69,85 5,15 38,44 7,938 85 283,5 

(215) 214 374 300 84 139 220 270 134 220 270 34,925 80 69,85 5,15 38,44 7,938 85 283,5 


P5 

[mm] 

7 - 35 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Input Unit P5 

12h 3/9h 



(143) 5.51 8.86 6.85 2.09 3.46 6.3 9.25 3.46 7.48 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.62 

(145) 5.51 8.86 6.85 2.09 3.46 6.3 9.25 3.46 7.48 9.25 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.62 

(182) 6.85 9.84 9.13 2.36 3.46 6.3 9.45 3.46 7.48 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.25 

D.88 -P5 (184) 6.85 9.84 9.13 2.36 3.46 6.3 9.45 3.46 7.48 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.25 

(213) 8.43 14.72 11.81 3.31 6.06 7.09 9.06 4.88 8.66 10.63 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.52 

(215) 8.43 14.72 11.81 3.31 6.06 7.09 9.06 4.88 8.66 10.63 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.52 

(143) 5.51 8.86 6.85 2.09 3.46 7.68 11.81 3.46 7.68 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.18 

(145) 5.51 8.86 6.85 2.09 3.46 7.68 11.81 3.46 7.68 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.18 

(182) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 8.66 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.69 

(184) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 8.66 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.69 

E.108 

(213) 8.43 

-P5 

(215) 8.43 

14.72 11.81 3.31 

14.72 11.81 3.31 

8.23 

8.23 

9.45 

9.45 

13.39 

13.39 

7.24 

7.24 

8.66 

8.66 

13.39 

13.39 

1.38 3.15 2.75 

1.38 3.15 2.75 

0.2 

0.2 

1.51 0.31 3.35 

1.51 0.31 3.35 

9.93 

9.93 

(254) 9.88 14.72 11.81 3.39 7.24 9.45 13.39 6.26 8.66 13.39 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.67 

(256) 9.88 14.72 11.81 3.39 7.24 9.45 13.39 6.26 8.66 13.39 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.67 

(286) 11.65 18.74 15.75 4.25 8.58 9.84 13.86 8.58 11.42 13.86 2.13 4.33 3.5 0.44 2.35 0.5 5.31 12.48 

(143) 5.51 8.86 6.85 2.09 3.46 7.48 11.81 3.46 9.06 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.18 

(145) 5.51 8.86 6.85 2.09 3.46 7.48 11.81 3.46 9.06 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.18 

(182) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 9.06 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.69 

(184) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 9.06 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.69 

Z.108 -P5 (213) 8.43 14.72 11.81 3.31 5.28 8.66 10.63 8.23 10.04 11.81 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.93 

(215) 8.43 14.72 11.81 3.31 5.28 8.66 10.63 8.23 10.04 11.81 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.93 

(254) 9.88 14.72 11.81 3.39 5.28 8.66 10.63 8.23 10.04 12.01 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.67 

(256) 9.88 14.72 11.81 3.39 5.28 8.66 10.63 8.23 10.04 12.01 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.67 

(286) 11.65 18.74 15.75 4.25 9.57 10.55 13.86 9.17 10.55 13.86 2.13 4.33 3.5 0.44 2.35 0.5 5.31 12.48 

(143) 5.51 8.86 6.85 2.09 3.46 7.48 11.81 3.46 9.06 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.63 

(145) 5.51 8.86 6.85 2.09 3.46 7.48 11.81 3.46 9.06 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.63 

(182) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 9.06 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.16 

K.108 

(184) 6.85 

-P5 

(213) 8.43 

9.84 9.13 2.36 

14.72 11.81 3.31 

3.46 

6.06 

8.66 

7.09 

12.6 

9.06 

3.46 

4.88 

9.06 

8.66 

12.6 

10.63 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.16 

1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.42 

(215) 8.43 14.72 11.81 3.31 6.06 7.09 9.06 4.88 8.66 10.63 1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.42 

(254) 9.88 14.72 11.81 3.39 8.23 7.09 9.06 7.24 8.66 10.63 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.12 

(256) 9.88 14.72 11.81 3.39 8.23 7.09 9.06 7.24 8.66 10.63 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.12 


7 - 36 

P5 

[inch]

Input Unit P5 


12h 3/9h 



(143) 140 225 174 53 88 160 235 88 190 235 22,225 50 38,1 6,9 24,35 4,763 63 194 

(145) 140 225 174 53 88 160 235 88 190 235 22,225 50 38,1 6,9 24,35 4,763 63 194 

D.88 

(182) 174 

-P5 

(184) 174 

250 

250 

232 

232 

60 

60 

88 

88 

160 

160 

240 

240 

88 

88 

190 

190 

240 

240 

28,575 

28,575 

60 

60 

47,63 

47,63 

7,37 

7,37 

31,4 

31,4 

6,35 

6,35 

73 

73 

210 

210 

(213) 214 374 300 84 154 180 230 124 220 270 34,925 80 69,85 5,15 38,44 7,938 85 293 

(215) 214 374 300 84 154 180 230 124 220 270 34,925 80 69,85 5,15 38,44 7,938 85 293 

(143) 140 225 174 53 88 195 300 88 195 300 22,225 50 38,1 6,9 24,35 4,763 63 157,5 

(145) 140 225 174 53 88 195 300 88 195 300 22,225 50 38,1 6,9 24,35 4,763 63 157,5 

(182) 174 250 232 60 88 220 320 88 220 320 28,575 60 47,63 7,37 31,4 6,35 73 170,5 

(184) 174 250 232 60 88 220 320 88 220 320 28,575 60 47,63 7,37 31,4 6,35 73 170,5 

E.108 -P5 (213) 214 374 300 84 209 240 340 184 220 340 34,925 80 69,85 5,15 38,44 7,938 85 252,5 

(215) 214 374 300 84 209 240 340 184 220 340 34,925 80 69,85 5,15 38,44 7,938 85 252,5 

(254) 251 374 300 86 184 240 340 159 220 340 41,275 110 78,58 16,24 45,45 9,53 132 297 

(256) 251 374 300 86 184 240 340 159 220 340 41,275 110 78,58 16,24 45,45 9,53 132 297 

(286) 296 476 400 108 218 250 352 218 290 352 53,975 110 88,9 11,1 59,58 12,7 135 317,5 

(143) 140 225 174 53 88 190 300 88 230 300 22,225 50 38,1 6,9 24,35 4,763 63 157,5 

(145) 140 225 174 53 88 190 300 88 230 300 22,225 50 38,1 6,9 24,35 4,763 63 157,5 

(182) 174 250 232 60 88 220 320 88 230 320 28,575 60 47,63 7,37 31,4 6,35 73 170,5 

(184) 174 250 232 60 88 220 320 88 230 320 28,575 60 47,63 7,37 31,4 6,35 73 170,5 

Z.108 -P5 (213) 214 374 300 84 134 220 270 209 255 300 34,925 80 69,85 5,15 38,44 7,938 85 252,5 

(215) 214 374 300 84 134 220 270 209 255 300 34,925 80 69,85 5,15 38,44 7,938 85 252,5 

(254) 251 374 300 86 134 220 270 209 255 305 41,275 110 78,58 16,24 45,45 9,53 132 297 

(256) 251 374 300 86 134 220 270 209 255 305 41,275 110 78,58 16,24 45,45 9,53 132 297 

(286) 296 476 400 108 243 268 352 233 268 352 53,975 110 88,9 11,1 59,58 12,7 135 317,5 

(143) 140 225 174 53 88 190 300 88 230 300 22,225 50 38,1 6,9 24,35 4,763 63 169 

(145) 140 225 174 53 88 190 300 88 230 300 22,225 50 38,1 6,9 24,35 4,763 63 169 

(182) 174 250 232 60 88 220 320 88 230 320 28,575 60 47,63 7,37 31,4 6,35 73 182,5 

K.108 

(184) 174 

-P5 

(213) 214 

250 

374 

232 

300 

60 

84 

88 

154 

220 

180 

320 

230 

88 

124 

230 

220 

320 

270 

28,575 

34,925 

60 

80 

47,63 

69,85 

7,37 

5,15 

31,4 

38,44 

6,35 

7,938 

73 

85 

182,5 

265 

(215) 214 374 300 84 154 180 230 124 220 270 34,925 80 69,85 5,15 38,44 7,938 85 265 

(254) 251 374 300 86 209 180 230 184 220 270 41,275 110 78,58 16,24 45,45 9,53 132 308,5 

(256) 251 374 300 86 209 180 230 184 220 270 41,275 110 78,58 16,24 45,45 9,53 132 308,5 


P5 

[mm] 

7 - 37 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Input Unit P5 

12h 3/9h 



(143) 5.51 8.86 6.85 2.09 3.46 7.48 11.61 3.46 7.48 11.61 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.63 

(145) 5.51 8.86 6.85 2.09 3.46 7.48 11.61 3.46 7.48 11.61 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.63 

(182) 6.85 9.84 9.13 2.36 3.46 8.78 12.52 3.46 7.48 9.45 1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.16 

F.108B 

(184) 6.85 

-P5 

(213) 8.43 

9.84 9.13 2.36 

14.72 11.81 3.31 

3.46 

5.63 

8.78 

8.15 

12.52 

10.12 

3.46 

5.31 

7.48 

8.46 

9.45 

10.43 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.16 

1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.42 

(215) 8.43 14.72 11.81 3.31 5.63 8.15 10.12 5.31 8.46 10.43 1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.42 

(254) 9.88 14.72 11.81 3.39 5.63 8.15 10.12 5.31 8.46 10.43 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.12 

(256) 9.88 14.72 11.81 3.39 5.63 8.15 10.12 5.31 8.46 10.43 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.12 

(143) 5.51 8.86 6.85 2.09 3.46 7.48 11.81 3.46 9.06 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.38 

(145) 5.51 8.86 6.85 2.09 3.46 7.48 11.81 3.46 9.06 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.38 

(182) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 9.06 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.01 

D.108 

(184) 6.85 

-P5 

(213) 8.43 

9.84 9.13 2.36 

14.72 11.81 3.31 

3.46 

5.28 

8.66 

8.66 

12.6 

10.63 

3.46 

8.23 

9.06 

10.04 

12.6 

11.81 

1.13 2.36 1.88 0.29 1.24 0.25 2.87 8.01 

1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.21 

(215) 8.43 14.72 11.81 3.31 5.28 8.66 10.63 8.23 10.04 11.81 1.38 3.15 2.75 0.2 1.51 0.31 3.35 11.21 

(254) 9.88 14.72 11.81 3.39 5.28 8.66 10.63 8.23 10.04 12.01 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.83 

(256) 9.88 14.72 11.81 3.39 5.28 8.66 10.63 8.23 10.04 12.01 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.83 

(182) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 8.66 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.32 

(184) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 8.66 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.32 

(213) 8.43 14.72 11.81 3.31 6.06 9.84 13.39 4.88 9.84 13.39 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.51 

(215) 8.43 14.72 11.81 3.31 6.06 9.84 13.39 4.88 9.84 13.39 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.51 

E.128 -P5 (254) 9.88 14.72 11.81 3.39 8.23 9.84 13.39 7.24 9.84 13.39 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.02 

(256) 9.88 14.72 11.81 3.39 8.23 9.84 13.39 7.24 9.84 13.39 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.02 

(286) 11.65 18.74 15.75 4.25 9.57 10.63 13.86 9.57 10.63 13.86 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.95 

(324) 13.46 21.93 18.9 5.59 8.23 11.61 13.58 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 14.21 

(326) 13.46 21.93 18.9 5.59 8.23 11.61 13.58 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 14.21 

(182) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 10.04 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.32 

(184) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 10.04 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.32 

(213) 8.43 14.72 11.81 3.31 5.47 10.04 12.01 5.28 11.02 12.99 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.51 

(215) 8.43 14.72 11.81 3.31 5.47 10.04 12.01 5.28 11.02 12.99 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.51 

Z.128 -P5 (254) 9.88 14.72 11.81 3.39 5.47 10.04 12.01 5.28 11.02 12.99 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.02 

(256) 9.88 14.72 11.81 3.39 5.47 10.04 12.01 5.28 11.02 12.99 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.02 

(286) 11.65 18.74 15.75 4.25 9.17 9.96 13.86 8.23 11.54 13.86 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.95 

(324) 13.46 21.93 18.9 5.59 7.83 11.61 13.39 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 14.21 

(326) 13.46 21.93 18.9 5.59 7.83 11.61 13.39 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 14.21 


7 - 38 

P5 

[inch]

Input Unit P5 


12h 3/9h 



(143) 140 225 174 53 88 190 295 88 190 295 22,225 50 38,1 6,9 24,35 4,763 63 169 

(145) 140 225 174 53 88 190 295 88 190 295 22,225 50 38,1 6,9 24,35 4,763 63 169 

(182) 174 250 232 60 88 223 318 88 190 240 28,575 60 47,63 7,37 31,4 6,35 73 182,5 

F.108B 

(184) 174 

-P5 

(213) 214 

250 

374 

232 

300 

60 

84 

88 

143 

223 

207 

318 

257 

88 

135 

190 

215 

240 

265 

28,575 

34,925 

60 

80 

47,63 

69,85 

7,37 

5,15 

31,4 

38,44 

6,35 

7,938 

73 

85 

182,5 

265 

(215) 214 374 300 84 143 207 257 135 215 265 34,925 80 69,85 5,15 38,44 7,938 85 265 

(254) 251 374 300 86 143 207 257 135 215 265 41,275 110 78,58 16,24 45,45 9,53 132 308,5 

(256) 251 374 300 86 143 207 257 135 215 265 41,275 110 78,58 16,24 45,45 9,53 132 308,5 

(143) 140 225 174 53 88 190 300 88 230 300 22,225 50 38,1 6,9 24,35 4,763 63 188 

(145) 140 225 174 53 88 190 300 88 230 300 22,225 50 38,1 6,9 24,35 4,763 63 188 

(182) 174 250 232 60 88 220 320 88 230 320 28,575 60 47,63 7,37 31,4 6,35 73 204 

D.108 

(184) 174 

-P5 

(213) 214 

250 

374 

232 

300 

60 

84 

88 

134 

220 

220 

320 

270 

88 

209 

230 

255 

320 

300 

28,575 

34,925 

60 

80 

47,63 

69,85 

7,37 

5,15 

31,4 

38,44 

6,35 

7,938 

73 

85 

204 

285 

(215) 214 374 300 84 134 220 270 209 255 300 34,925 80 69,85 5,15 38,44 7,938 85 285 

(254) 251 374 300 86 134 220 270 209 255 305 41,275 110 78,58 16,24 45,45 9,53 132 326,5 

(256) 251 374 300 86 134 220 270 209 255 305 41,275 110 78,58 16,24 45,45 9,53 132 326,5 

(182) 174 250 232 60 88 220 320 88 220 320 28,575 60 47,63 7,37 31,4 6,35 73 161 

(184) 174 250 232 60 88 220 320 88 220 320 28,575 60 47,63 7,37 31,4 6,35 73 161 

(213) 214 374 300 84 154 250 340 124 250 340 34,925 80 69,85 5,15 38,44 7,938 85 242 

(215) 214 374 300 84 154 250 340 124 250 340 34,925 80 69,85 5,15 38,44 7,938 85 242 

E.128 -P5 (254) 251 374 300 86 209 250 340 184 250 340 41,275 110 78,58 16,24 45,45 9,53 132 280,5 

(256) 251 374 300 86 209 250 340 184 250 340 41,275 110 78,58 16,24 45,45 9,53 132 280,5 

(286) 296 476 400 108 243 270 352 243 270 352 53,975 110 88,9 11,1 59,58 12,7 135 304 

(324) 342 557 480 142 209 295 345 - - - 53,975 140 88,9 11,1 59,58 12,7 147 361,5 

(326) 342 557 480 142 209 295 345 - - - 53,975 140 88,9 11,1 59,58 12,7 147 361,5 

(182) 174 250 232 60 88 220 320 88 255 320 28,575 60 47,63 7,37 31,4 6,35 73 161 

(184) 174 250 232 60 88 220 320 88 255 320 28,575 60 47,63 7,37 31,4 6,35 73 161 

(213) 214 374 300 84 139 255 305 134 280 330 34,925 80 69,85 5,15 38,44 7,938 85 242 

(215) 214 374 300 84 139 255 305 134 280 330 34,925 80 69,85 5,15 38,44 7,938 85 242 

Z.128 -P5 (254) 251 374 300 86 139 255 305 134 280 330 41,275 110 78,58 16,24 45,45 9,53 132 280,5 

(256) 251 374 300 86 139 255 305 134 280 330 41,275 110 78,58 16,24 45,45 9,53 132 280,5 

(286) 296 476 400 108 233 253 352 209 293 352 53,975 110 88,9 11,1 59,58 12,7 135 304 

(324) 342 557 480 142 199 295 340 - - - 53,975 140 88,9 11,1 59,58 12,7 147 361,5 

(326) 342 557 480 142 199 295 340 - - - 53,975 140 88,9 11,1 59,58 12,7 147 361,5 


P5 

[mm] 

7 - 39 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Input Unit P5 

12h 3/9h 



(143) 5.51 8.86 6.85 2.09 3.46 9.06 11.81 3.46 10.04 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.18 

(145) 5.51 8.86 6.85 2.09 3.46 9.06 11.81 3.46 10.04 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.18 

(182) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 10.04 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.69 

(184) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 10.04 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.69 

K.128 -P5 (213) 8.43 14.72 11.81 3.31 5.28 8.66 10.63 8.23 10.04 11.81 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.93 

(215) 8.43 14.72 11.81 3.31 5.28 8.66 10.63 8.23 10.04 11.81 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.93 

(254) 9.88 14.72 11.81 3.39 5.28 8.66 10.63 8.23 10.04 12.01 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.67 

(256) 9.88 14.72 11.81 3.39 5.28 8.66 10.63 8.23 10.04 12.01 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.67 

(286) 11.65 18.74 15.75 4.25 7.72 9.57 13.86 10.28 9.57 13.86 2.13 4.33 3.5 0.44 2.35 0.5 5.31 12.48 

(143) 5.51 8.86 6.85 2.09 3.46 9.25 11.61 3.46 9.06 11.61 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.18 

(145) 5.51 8.86 6.85 2.09 3.46 9.25 11.61 3.46 9.06 11.61 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.18 

(182) 6.85 9.84 9.13 2.36 3.46 9.84 12.6 3.46 9.25 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.69 

(184) 6.85 9.84 9.13 2.36 3.46 9.84 12.6 3.46 9.25 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.69 

F.128B -P5 (213) 8.43 14.72 11.81 3.31 7.68 10.43 14.37 6.89 11.22 14.37 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.93 

(215) 8.43 14.72 11.81 3.31 7.68 10.43 14.37 6.89 11.22 14.37 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.93 

(254) 9.88 14.72 11.81 3.39 7.68 10.43 14.37 6.89 11.22 14.37 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.67 

(256) 9.88 14.72 11.81 3.39 7.68 10.43 14.37 6.89 11.22 14.37 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.67 

(286) 11.65 18.74 15.75 4.25 8.54 10.55 14.09 8.54 10.55 14.09 2.13 4.33 3.5 0.44 2.35 0.5 5.31 12.48 

(143) 5.51 8.86 6.85 2.09 3.46 9.06 11.81 3.46 10.04 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.1 

(145) 5.51 8.86 6.85 2.09 3.46 9.06 11.81 3.46 10.04 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.1 

(182) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 10.04 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.73 

(184) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 10.04 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.73 

D.128 -P5 (213) 8.43 14.72 11.81 3.31 5.47 10.04 12.01 5.28 11.02 12.99 1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.85 

(215) 8.43 14.72 11.81 3.31 5.47 10.04 12.01 5.28 11.02 12.99 1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.85 

(254) 9.88 14.72 11.81 3.39 5.47 10.04 12.01 5.28 11.02 12.99 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.48 

(256) 9.88 14.72 11.81 3.39 5.47 10.04 12.01 5.28 11.02 12.99 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.48 

(286) 11.65 18.74 15.75 4.25 9.17 9.96 13.86 8.23 11.54 13.86 2.13 4.33 3.5 0.44 2.35 0.5 5.31 13.41 

(213) 8.43 14.72 11.81 3.31 5.28 11.02 14.96 8.23 11.02 14.96 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.2 

(215) 8.43 14.72 11.81 3.31 5.28 11.02 14.96 8.23 11.02 14.96 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.2 

(254) 9.88 14.72 11.81 3.39 5.28 11.02 14.96 8.23 11.02 14.96 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.73 

(256) 9.88 14.72 11.81 3.39 5.28 11.02 14.96 8.23 11.02 14.96 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.73 

E.148 -P5 (286) 11.65 18.74 15.75 4.25 7.6 11.81 16.73 9.17 11.81 16.73 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.65 

(324) 13.46 21.93 18.9 5.59 10 12.4 16.34 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.92 

(326) 13.46 21.93 18.9 5.59 10 12.4 16.34 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.92 

(364) 15.59 21.93 18.9 6.34 10 12.01 13.78 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.9 

(365) 15.59 21.93 18.9 6.34 10 12.01 13.78 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.9 


7 - 40 

P5 

[inch]

Input Unit P5 


12h 3/9h 



(143) 5.51 8.86 6.85 2.09 3.46 9.06 11.81 3.46 10.04 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.18 

(145) 5.51 8.86 6.85 2.09 3.46 9.06 11.81 3.46 10.04 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.18 

(182) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 10.04 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.69 

(184) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 10.04 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.69 

K.128 -P5 (213) 8.43 14.72 11.81 3.31 5.28 8.66 10.63 8.23 10.04 11.81 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.93 

(215) 8.43 14.72 11.81 3.31 5.28 8.66 10.63 8.23 10.04 11.81 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.93 

(254) 9.88 14.72 11.81 3.39 5.28 8.66 10.63 8.23 10.04 12.01 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.67 

(256) 9.88 14.72 11.81 3.39 5.28 8.66 10.63 8.23 10.04 12.01 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.67 

(286) 11.65 18.74 15.75 4.25 7.72 9.57 13.86 10.28 9.57 13.86 2.13 4.33 3.5 0.44 2.35 0.5 5.31 12.48 

(143) 5.51 8.86 6.85 2.09 3.46 9.25 11.61 3.46 9.06 11.61 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.18 

(145) 5.51 8.86 6.85 2.09 3.46 9.25 11.61 3.46 9.06 11.61 0.88 1.97 1.5 0.27 0.96 0.19 2.48 6.18 

(182) 6.85 9.84 9.13 2.36 3.46 9.84 12.6 3.46 9.25 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.69 

(184) 6.85 9.84 9.13 2.36 3.46 9.84 12.6 3.46 9.25 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.69 

F.128B -P5 (213) 8.43 14.72 11.81 3.31 7.68 10.43 14.37 6.89 11.22 14.37 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.93 

(215) 8.43 14.72 11.81 3.31 7.68 10.43 14.37 6.89 11.22 14.37 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.93 

(254) 9.88 14.72 11.81 3.39 7.68 10.43 14.37 6.89 11.22 14.37 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.67 

(256) 9.88 14.72 11.81 3.39 7.68 10.43 14.37 6.89 11.22 14.37 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.67 

(286) 11.65 18.74 15.75 4.25 8.54 10.55 14.09 8.54 10.55 14.09 2.13 4.33 3.5 0.44 2.35 0.5 5.31 12.48 

(143) 5.51 8.86 6.85 2.09 3.46 9.06 11.81 3.46 10.04 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.1 

(145) 5.51 8.86 6.85 2.09 3.46 9.06 11.81 3.46 10.04 11.81 0.88 1.97 1.5 0.27 0.96 0.19 2.48 7.1 

(182) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 10.04 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.73 

(184) 6.85 9.84 9.13 2.36 3.46 8.66 12.6 3.46 10.04 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.73 

D.128 -P5 (213) 8.43 14.72 11.81 3.31 5.47 10.04 12.01 5.28 11.02 12.99 1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.85 

(215) 8.43 14.72 11.81 3.31 5.47 10.04 12.01 5.28 11.02 12.99 1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.85 

(254) 9.88 14.72 11.81 3.39 5.47 10.04 12.01 5.28 11.02 12.99 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.48 

(256) 9.88 14.72 11.81 3.39 5.47 10.04 12.01 5.28 11.02 12.99 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.48 

(286) 11.65 18.74 15.75 4.25 9.17 9.96 13.86 8.23 11.54 13.86 2.13 4.33 3.5 0.44 2.35 0.5 5.31 13.41 

(213) 8.43 14.72 11.81 3.31 5.28 11.02 14.96 8.23 11.02 14.96 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.2 

(215) 8.43 14.72 11.81 3.31 5.28 11.02 14.96 8.23 11.02 14.96 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.2 

(254) 9.88 14.72 11.81 3.39 5.28 11.02 14.96 8.23 11.02 14.96 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.73 

(256) 9.88 14.72 11.81 3.39 5.28 11.02 14.96 8.23 11.02 14.96 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.73 

E.148 -P5 (286) 11.65 18.74 15.75 4.25 7.6 11.81 16.73 9.17 11.81 16.73 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.65 

(324) 13.46 21.93 18.9 5.59 10 12.4 16.34 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.92 

(326) 13.46 21.93 18.9 5.59 10 12.4 16.34 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.92 

(364) 15.59 21.93 18.9 6.34 10 12.01 13.78 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.9 

(365) 15.59 21.93 18.9 6.34 10 12.01 13.78 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.9 


P5 

[inch] 

7 - 41 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Input Unit P5 

12h 3/9h 



(182) 6.85 9.84 9.13 2.36 3.46 9.65 12.6 3.46 11.02 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.54 

(184) 6.85 9.84 9.13 2.36 3.46 9.65 12.6 3.46 11.02 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 7.54 

(213) 8.43 14.72 11.81 3.31 7.24 11.02 12.99 6.26 12.01 13.98 1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.69 

(215) 8.43 14.72 11.81 3.31 7.24 11.02 12.99 6.26 12.01 13.98 1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.69 

D.148 -P5 (254) 9.88 14.72 11.81 3.39 7.24 11.02 12.99 6.26 12.01 13.98 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.22 

(256) 9.88 14.72 11.81 3.39 7.24 11.02 12.99 6.26 12.01 13.98 1.63 4.33 3.09 0.64 1.79 0.38 5.2 12.22 

(286) 11.65 18.74 15.75 4.25 9.76 11.54 13.86 9.76 12.52 16.02 2.13 4.33 3.5 0.44 2.35 0.5 5.31 13.15 

(324) 13.46 21.93 18.9 5.59 7.83 12.01 13.78 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 15.41 

(326) 13.46 21.93 18.9 5.59 7.83 12.01 13.78 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 15.41 

(213) 8.43 14.72 11.81 3.31 7.24 11.02 12.99 6.26 12.01 13.98 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.2 

(215) 8.43 14.72 11.81 3.31 7.24 11.02 12.99 6.26 12.01 13.98 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.2 

(254) 9.88 14.72 11.81 3.39 7.24 11.02 12.99 6.26 12.01 13.98 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.73 

(256) 9.88 14.72 11.81 3.39 7.24 11.02 12.99 6.26 12.01 13.98 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.73 

Z.148 -P5 (286) 11.65 18.74 15.75 4.25 9.76 11.54 13.86 9.76 12.52 16.02 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.65 

(324) 13.46 21.93 18.9 5.59 7.83 12.01 13.78 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.92 

(326) 13.46 21.93 18.9 5.59 7.83 12.01 13.78 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.92 

(364) 15.59 21.93 18.9 6.34 10 12.01 13.78 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.9 

(365) 15.59 21.93 18.9 6.34 10 12.01 13.78 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.9 

(182) 6.85 9.84 9.13 2.36 3.46 9.65 12.6 3.46 11.02 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.32 

(184) 6.85 9.84 9.13 2.36 3.46 9.65 12.6 3.46 11.02 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.32 

(213) 8.43 14.72 11.81 3.31 5.47 10.04 12.01 5.28 11.02 12.99 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.51 

(215) 8.43 14.72 11.81 3.31 5.47 10.04 12.01 5.28 11.02 12.99 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.51 

K.148 -P5 (254) 9.88 14.72 11.81 3.39 5.47 10.04 12.01 5.28 11.02 12.99 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.02 

(256) 9.88 14.72 11.81 3.39 5.47 10.04 12.01 5.28 11.02 12.99 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.02 

(286) 11.65 18.74 15.75 4.25 7.6 11.54 13.86 9.17 9.96 13.86 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.95 

(324) 13.46 21.93 18.9 5.59 7.83 13.58 15.35 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 14.21 

(326) 13.46 21.93 18.9 5.59 7.83 13.58 15.35 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 14.21 

(182) 6.85 9.84 9.13 2.36 3.46 10.04 12.6 3.46 10.04 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.32 

(184) 6.85 9.84 9.13 2.36 3.46 10.04 12.6 3.46 10.04 12.6 1.13 2.36 1.88 0.29 1.24 0.25 2.87 6.32 

(213) 8.43 14.72 11.81 3.31 6.69 11.42 14.37 6.89 11.22 14.37 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.51 

(215) 8.43 14.72 11.81 3.31 6.69 11.42 14.37 6.89 11.22 14.37 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.51 

F.148B -P5 (254) 9.88 14.72 11.81 3.39 6.69 11.42 14.37 6.89 11.22 14.37 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.02 

(256) 9.88 14.72 11.81 3.39 6.69 11.42 14.37 6.89 11.22 14.37 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.02 

(286) 11.65 18.74 15.75 4.25 7.56 11.54 14.09 7.8 11.3 14.06 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.95 

(324) 13.46 21.93 18.9 5.59 9.61 12.72 13.9 7.38 15.47 16.65 2.13 5.51 3.5 0.44 2.35 0.5 5.79 14.21 

(326) 13.46 21.93 18.9 5.59 9.61 12.72 13.9 7.38 15.47 16.65 2.13 5.51 3.5 0.44 2.35 0.5 5.79 14.21 


7 - 42 

P5 

[inch]

Input Unit P5 


12h 3/9h 



(182) 174 250 232 60 88 245 320 88 280 320 28,575 60 47,63 7,37 31,4 6,35 73 192 

(184) 174 250 232 60 88 245 320 88 280 320 28,575 60 47,63 7,37 31,4 6,35 73 192 

(213) 214 374 300 84 184 280 330 159 305 355 34,925 80 69,85 5,15 38,44 7,938 85 272 

(215) 214 374 300 84 184 280 330 159 305 355 34,925 80 69,85 5,15 38,44 7,938 85 272 

D.148 -P5 (254) 251 374 300 86 184 280 330 159 305 355 41,275 110 78,58 16,24 45,45 9,53 132 311 

(256) 251 374 300 86 184 280 330 159 305 355 41,275 110 78,58 16,24 45,45 9,53 132 311 

(286) 296 476 400 108 248 293 352 248 318 407 53,975 110 88,9 11,1 59,58 12,7 135 334,5 

(324) 342 557 480 142 199 305 350 - - - 53,975 140 88,9 11,1 59,58 12,7 147 392 

(326) 342 557 480 142 199 305 350 - - - 53,975 140 88,9 11,1 59,58 12,7 147 392 

(213) 214 374 300 84 184 280 330 159 305 355 34,925 80 69,85 5,15 38,44 7,938 85 234 

(215) 214 374 300 84 184 280 330 159 305 355 34,925 80 69,85 5,15 38,44 7,938 85 234 

(254) 251 374 300 86 184 280 330 159 305 355 41,275 110 78,58 16,24 45,45 9,53 132 273 

(256) 251 374 300 86 184 280 330 159 305 355 41,275 110 78,58 16,24 45,45 9,53 132 273 

Z.148 -P5 (286) 296 476 400 108 248 293 352 248 318 407 53,975 110 88,9 11,1 59,58 12,7 135 296,5 

(324) 342 557 480 142 199 305 350 - - - 53,975 140 88,9 11,1 59,58 12,7 147 354 

(326) 342 557 480 142 199 305 350 - - - 53,975 140 88,9 11,1 59,58 12,7 147 354 

(364) 396 557 480 161 254 305 350 - - - 60,325 140 107,95 17,05 67,36 15,875 147 353,5 

(365) 396 557 480 161 254 305 350 - - - 60,325 140 107,95 17,05 67,36 15,875 147 353,5 

(182) 174 250 232 60 88 245 320 88 280 320 28,575 60 47,63 7,37 31,4 6,35 73 161 

(184) 174 250 232 60 88 245 320 88 280 320 28,575 60 47,63 7,37 31,4 6,35 73 161 

(213) 214 374 300 84 139 255 305 134 280 330 34,925 80 69,85 5,15 38,44 7,938 85 242 

(215) 214 374 300 84 139 255 305 134 280 330 34,925 80 69,85 5,15 38,44 7,938 85 242 

K.148 -P5 (254) 251 374 300 86 139 255 305 134 280 330 41,275 110 78,58 16,24 45,45 9,53 132 280,5 

(256) 251 374 300 86 139 255 305 134 280 330 41,275 110 78,58 16,24 45,45 9,53 132 280,5 

(286) 296 476 400 108 193 293 352 233 253 352 53,975 110 88,9 11,1 59,58 12,7 135 304 

(324) 342 557 480 142 199 345 390 - - - 53,975 140 88,9 11,1 59,58 12,7 147 361,5 

(326) 342 557 480 142 199 345 390 - - - 53,975 140 88,9 11,1 59,58 12,7 147 361,5 

(182) 174 250 232 60 88 255 320 88 255 320 28,575 60 47,63 7,37 31,4 6,35 73 161 

(184) 174 250 232 60 88 255 320 88 255 320 28,575 60 47,63 7,37 31,4 6,35 73 161 

(213) 214 374 300 84 170 290 365 175 285 365 34,925 80 69,85 5,15 38,44 7,938 85 242 

(215) 214 374 300 84 170 290 365 175 285 365 34,925 80 69,85 5,15 38,44 7,938 85 242 

F.148B -P5 (254) 251 374 300 86 170 290 365 175 285 365 41,275 110 78,58 16,24 45,45 9,53 132 280,5 

(256) 251 374 300 86 170 290 365 175 285 365 41,275 110 78,58 16,24 45,45 9,53 132 280,5 

(286) 296 476 400 108 192 293 358 198 287 357 53,975 110 88,9 11,1 59,58 12,7 135 304 

(324) 342 557 480 142 244 323 353 187,5 393 423 53,975 140 88,9 11,1 59,58 12,7 147 361,5 

(326) 342 557 480 142 244 323 353 187,5 393 423 53,975 140 88,9 11,1 59,58 12,7 147 361,5 


P5 

[mm] 

7 - 43 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Input Unit P5 

12h 3/9h 



(213) 8.43 14.72 11.81 3.31 6.06 12.2 14.17 4.88 13.39 15.35 1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.24 

(215) 8.43 14.72 11.81 3.31 6.06 12.2 14.17 4.88 13.39 15.35 1.38 3.15 2.75 0.2 1.51 0.31 3.35 10.24 

(254) 9.88 14.72 11.81 3.39 6.06 12.2 14.17 4.88 13.39 15.35 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.77 

D.168 -P5 (256) 9.88 14.72 11.81 3.39 6.06 12.2 14.17 4.88 13.39 15.35 1.63 4.33 3.09 0.64 1.79 0.38 5.2 11.77 

(286) 11.65 18.74 15.75 4.25 9.41 13.27 16.02 9.17 13.5 16.02 2.13 4.33 3.5 0.44 2.35 0.5 5.31 12.7 

(324) 13.46 21.93 18.9 5.59 7.83 13.58 15.35 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 14.96 

(326) 13.46 21.93 18.9 5.59 7.83 13.58 15.35 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 14.96 

(213) 8.43 14.72 11.81 3.31 6.06 12.2 14.17 4.88 13.39 15.35 1.38 3.15 2.75 0.2 1.51 0.31 3.35 8.63 

(215) 8.43 14.72 11.81 3.31 6.06 12.2 14.17 4.88 13.39 15.35 1.38 3.15 2.75 0.2 1.51 0.31 3.35 8.63 

(254) 9.88 14.72 11.81 3.39 6.06 12.2 14.17 4.88 13.39 15.35 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.16 

(256) 9.88 14.72 11.81 3.39 6.06 12.2 14.17 4.88 13.39 15.35 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.16 

Z.168 -P5 (286) 11.65 18.74 15.75 4.25 9.41 13.27 16.02 9.17 13.5 16.02 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.08 

(324) 13.46 21.93 18.9 5.59 7.83 13.58 15.35 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.35 

(326) 13.46 21.93 18.9 5.59 7.83 13.58 15.35 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.35 

(364) 15.59 21.93 18.9 6.34 7.64 13.58 15.35 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.33 

(365) 15.59 21.93 18.9 6.34 7.64 13.58 15.35 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.33 

(213) 8.43 14.72 11.81 3.31 7.24 11.02 12.99 6.26 12.01 13.98 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.2 

(215) 8.43 14.72 11.81 3.31 7.24 11.02 12.99 6.26 12.01 13.98 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.2 

(254) 9.88 14.72 11.81 3.39 7.24 11.02 12.99 6.26 12.01 13.98 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.73 

(256) 9.88 14.72 11.81 3.39 7.24 11.02 12.99 6.26 12.01 13.98 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.73 

K.168 -P5 (286) 11.65 18.74 15.75 4.25 9.41 13.27 16.02 8.23 10.91 13.86 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.65 

(324) 13.46 21.93 18.9 5.59 7.83 15.35 17.13 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.92 

(326) 13.46 21.93 18.9 5.59 7.83 15.35 17.13 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.92 

(364) 15.59 21.93 18.9 6.34 7.83 15.35 17.13 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.9 

(365) 15.59 21.93 18.9 6.34 7.83 15.35 17.13 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.9 

(213) 8.43 14.72 11.81 3.31 5.98 12.13 14.49 6.1 12.01 14.37 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.2 

(215) 8.43 14.72 11.81 3.31 5.98 12.13 14.49 6.1 12.01 14.37 1.38 3.15 2.75 0.2 1.51 0.31 3.35 9.2 

(254) 9.88 14.72 11.81 3.39 5.98 12.13 14.49 6.1 12.01 14.37 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.73 

(256) 9.88 14.72 11.81 3.39 5.98 12.13 14.49 6.1 12.01 14.37 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.73 

F.168B -P5 (286) 11.65 18.74 15.75 4.25 10.16 12.52 17.01 10.31 12.32 16.85 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.65 

(324) 13.46 21.93 18.9 5.59 8.6 15.47 16.65 8.6 15.47 16.65 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.92 

(326) 13.46 21.93 18.9 5.59 8.6 15.47 16.65 8.6 15.47 16.65 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.92 

(364) 15.59 21.93 18.9 6.34 10.06 14.02 15.2 7.38 16.69 17.87 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.9 

(365) 15.59 21.93 18.9 6.34 10.06 14.02 15.2 7.38 16.69 17.87 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.9 


7 - 44 

P5 

[inch]

Input Unit P5 


12h 3/9h 



(213) 214 374 300 84 154 310 360 124 340 390 34,925 80 69,85 5,15 38,44 7,938 85 260,5 

(215) 214 374 300 84 154 310 360 124 340 390 34,925 80 69,85 5,15 38,44 7,938 85 260,5 

(254) 251 374 300 86 154 310 360 124 340 390 41,275 110 78,58 16,24 45,45 9,53 132 299,5 

D.168 -P5(256) 

251 374 300 86 154 310 360 124 340 390 41,275 110 78,58 16,24 45,45 9,53 132 299,5 

(286) 296 476 400 108 239 337 407 233 343 407 53,975 110 88,9 11,1 59,58 12,7 135 323 

(324) 342 557 480 142 199 345 390 - - - 53,975 140 88,9 11,1 59,58 12,7 147 380,5 

(326) 342 557 480 142 199 345 390 - - - 53,975 140 88,9 11,1 59,58 12,7 147 380,5 

(213) 214 374 300 84 154 310 360 124 340 390 34,925 80 69,85 5,15 38,44 7,938 85 219,5 

(215) 214 374 300 84 154 310 360 124 340 390 34,925 80 69,85 5,15 38,44 7,938 85 219,5 

(254) 251 374 300 86 154 310 360 124 340 390 41,275 110 78,58 16,24 45,45 9,53 132 258,5 

(256) 251 374 300 86 154 310 360 124 340 390 41,275 110 78,58 16,24 45,45 9,53 132 258,5 

Z.168 -P5(286) 

296 476 400 108 239 337 407 233 343 407 53,975 110 88,9 11,1 59,58 12,7 135 282 

(324) 342 557 480 142 199 345 390 - - - 53,975 140 88,9 11,1 59,58 12,7 147 339,5 

(326) 342 557 480 142 199 345 390 - - - 53,975 140 88,9 11,1 59,58 12,7 147 339,5 

(364) 396 557 480 161 194 345 390 - - - 60,325 140 107,95 17,05 67,36 15,875 147 339 

(365) 396 557 480 161 194 345 390 - - - 60,325 140 107,95 17,05 67,36 15,875 147 339 

(213) 214 374 300 84 184 280 330 159 305 355 34,925 80 69,85 5,15 38,44 7,938 85 234 

(215) 214 374 300 84 184 280 330 159 305 355 34,925 80 69,85 5,15 38,44 7,938 85 234 

(254) 251 374 300 86 184 280 330 159 305 355 41,275 110 78,58 16,24 45,45 9,53 132 273 

(256) 251 374 300 86 184 280 330 159 305 355 41,275 110 78,58 16,24 45,45 9,53 132 273 

K.168 -P5(286) 

296 476 400 108 239 337 407 209 277 352 53,975 110 88,9 11,1 59,58 12,7 135 296,5 

(324) 342 557 480 142 199 390 435 - - - 53,975 140 88,9 11,1 59,58 12,7 147 354 

(326) 342 557 480 142 199 390 435 - - - 53,975 140 88,9 11,1 59,58 12,7 147 354 

(364) 396 557 480 161 199 390 435 - - - 60,325 140 107,95 17,05 67,36 15,875 147 353,5 

(365) 396 557 480 161 199 390 435 - - - 60,325 140 107,95 17,05 67,36 15,875 147 353,5 

(213) 214 374 300 84 152 308 368 155 305 365 34,925 80 69,85 5,15 38,44 7,938 85 234 

(215) 214 374 300 84 152 308 368 155 305 365 34,925 80 69,85 5,15 38,44 7,938 85 234 

(254) 251 374 300 86 152 308 368 155 305 365 41,275 110 78,58 16,24 45,45 9,53 132 273 

(256) 251 374 300 86 152 308 368 155 305 365 41,275 110 78,58 16,24 45,45 9,53 132 273 

F.168B -P5 (286) 296 476 400 108 258 318 432 262 313 428 53,975 110 88,9 11,1 59,58 12,7 135 296,5 

(324) 342 557 480 142 218,5 393 423 218,5 393 423 53,975 140 88,9 11,1 59,58 12,7 147 354 

(326) 342 557 480 142 218,5 393 423 218,5 393 423 53,975 140 88,9 11,1 59,58 12,7 147 354 

(364) 396 557 480 161 255,5 356 386 187,5 424 454 60,325 140 107,95 17,05 67,36 15,875 147 353,5 

(365) 396 557 480 161 255,5 356 386 187,5 424 454 60,325 140 107,95 17,05 67,36 15,875 147 353,5 


P5 

[mm] 

7 - 45 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Input Unit P5 

12h 3/9h 



(213) 8.43 14.72 11.81 3.31 4.72 13.39 14.96 4.92 14.65 16.22 1.38 3.15 2.75 0.2 1.51 0.31 3.35 8.63 

(215) 8.43 14.72 11.81 3.31 4.72 13.39 14.96 4.92 14.65 16.22 1.38 3.15 2.75 0.2 1.51 0.31 3.35 8.63 

(254) 9.88 14.72 11.81 3.39 4.72 13.39 14.96 4.92 14.65 16.22 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.16 

(256) 9.88 14.72 11.81 3.39 4.72 13.39 14.96 4.92 14.65 16.22 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.16 

D.188 -P5 (286) 11.65 18.74 15.75 4.25 8.15 14.49 17.05 7.6 15.04 17.01 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.08 

(324) 13.46 21.93 18.9 5.59 7.62 15.47 16.65 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.35 

(326) 13.46 21.93 18.9 5.59 7.62 15.47 16.65 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.35 

(364) 15.59 21.93 18.9 6.34 7.62 16.46 17.64 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.33 

(365) 15.59 21.93 18.9 6.34 7.62 16.46 17.64 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.33 

(254) 9.88 14.72 11.81 3.39 4.72 13.39 14.96 4.92 14.65 16.22 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.16 

(256) 9.88 14.72 11.81 3.39 4.72 13.39 14.96 4.92 14.65 16.22 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.16 

(286) 11.65 18.74 15.75 4.25 8.15 14.49 17.05 7.6 15.04 17.01 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.08 

Z.188 -P5 (324) 13.46 21.93 18.9 5.59 7.62 15.47 16.65 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.35 

(326) 13.46 21.93 18.9 5.59 7.62 15.47 16.65 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.35 

(364) 15.59 21.93 18.9 6.34 7.62 16.46 17.64 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.33 

(365) 15.59 21.93 18.9 6.34 7.62 16.46 17.64 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.33 

(213) 8.43 14.72 11.81 3.31 5.51 14.17 16.14 6.3 11.81 14.57 1.38 3.15 2.75 0.2 1.51 0.31 3.35 8.63 

(215) 8.43 14.72 11.81 3.31 5.51 14.17 16.14 6.3 11.81 14.57 1.38 3.15 2.75 0.2 1.51 0.31 3.35 8.63 

(254) 9.88 14.72 11.81 3.39 5.51 14.17 16.14 6.3 11.81 14.57 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.16 

(256) 9.88 14.72 11.81 3.39 5.51 14.17 16.14 6.3 11.81 14.57 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.16 

K.188 -P5 (286) 11.65 18.74 15.75 4.25 7.76 14.88 17.05 7.2 11.89 14.06 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.08 

(324) 13.46 21.93 18.9 5.59 8.8 18.23 19.41 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.35 

(326) 13.46 21.93 18.9 5.59 8.8 18.23 19.41 - - - 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.35 

(364) 15.59 21.93 18.9 6.34 7.62 19.41 20.59 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.33 

(365) 15.59 21.93 18.9 6.34 7.62 19.41 20.59 - - - 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.33 

(213) 8.43 14.72 11.81 3.31 4.92 13.19 14.76 4.92 13.19 14.76 1.38 3.15 2.75 0.2 1.51 0.31 3.35 8.63 

(215) 8.43 14.72 11.81 3.31 4.92 13.19 14.76 4.92 13.19 14.76 1.38 3.15 2.75 0.2 1.51 0.31 3.35 8.63 

(254) 9.88 14.72 11.81 3.39 4.92 13.19 14.76 4.92 13.19 14.76 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.16 

(256) 9.88 14.72 11.81 3.39 4.92 13.19 14.76 4.92 13.19 14.76 1.63 4.33 3.09 0.64 1.79 0.38 5.2 10.16 

F.188B -P5 (286) 11.65 18.74 15.75 4.25 8.98 13.66 17.01 9.13 13.5 16.85 2.13 4.33 3.5 0.44 2.35 0.5 5.31 11.08 

(324) 13.46 21.93 18.9 5.59 7.74 15.35 16.54 8.8 18.23 19.41 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.35 

(326) 13.46 21.93 18.9 5.59 7.74 15.35 16.54 8.8 18.23 19.41 2.13 5.51 3.5 0.44 2.35 0.5 5.79 13.35 

(364) 15.59 21.93 18.9 6.34 7.58 16.5 17.68 7.38 16.69 17.87 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.33 

(365) 15.59 21.93 18.9 6.34 7.58 16.5 17.68 7.38 16.69 17.87 2.38 5.51 4.25 0.67 2.65 0.63 5.79 13.33 


7 - 46 

P5 

[inch]

Input Unit P5 


12h 3/9h 



(213) 214 374 300 84 120 340 380 125 372 412 34,925 80 69,85 5,15 38,44 7,938 85 219,5 

(215) 214 374 300 84 120 340 380 125 372 412 34,925 80 69,85 5,15 38,44 7,938 85 219,5 

(254) 251 374 300 86 120 340 380 125 372 412 41,275 110 78,58 16,24 45,45 9,53 132 258,5 

(256) 251 374 300 86 120 340 380 125 372 412 41,275 110 78,58 16,24 45,45 9,53 132 258,5 

D.188 -P5 (286) 296 476 400 108 207 368 433 193 382 432 53,975 110 88,9 11,1 59,58 12,7 135 282 

(324) 342 557 480 142 193,5 393 423 - - - 53,975 140 88,9 11,1 59,58 12,7 147 339,5 

(326) 342 557 480 142 193,5 393 423 - - - 53,975 140 88,9 11,1 59,58 12,7 147 339,5 

(364) 396 557 480 161 193,5 418 448 - - - 60,325 140 107,95 17,05 67,36 15,875 147 339 

(365) 396 557 480 161 193,5 418 448 - - - 60,325 140 107,95 17,05 67,36 15,875 147 339 

(254) 251 374 300 86 120 340 380 125 372 412 41,275 110 78,58 16,24 45,45 9,53 132 258,5 

(256) 251 374 300 86 120 340 380 125 372 412 41,275 110 78,58 16,24 45,45 9,53 132 258,5 

(286) 296 476 400 108 207 368 433 193 382 432 53,975 110 88,9 11,1 59,58 12,7 135 282 

Z.188 -P5 (324) 342 557 480 142 193,5 393 423 - - - 53,975 140 88,9 11,1 59,58 12,7 147 339,5 

(326) 342 557 480 142 193,5 393 423 - - - 53,975 140 88,9 11,1 59,58 12,7 147 339,5 

(364) 396 557 480 161 193,5 418 448 - - - 60,325 140 107,95 17,05 67,36 15,875 147 339 

(365) 396 557 480 161 193,5 418 448 - - - 60,325 140 107,95 17,05 67,36 15,875 147 339 

(213) 214 374 300 84 140 360 410 160 300 370 34,925 80 69,85 5,15 38,44 7,938 85 219,5 

(215) 214 374 300 84 140 360 410 160 300 370 34,925 80 69,85 5,15 38,44 7,938 85 219,5 

(254) 251 374 300 86 140 360 410 160 300 370 41,275 110 78,58 16,24 45,45 9,53 132 258,5 

(256) 251 374 300 86 140 360 410 160 300 370 41,275 110 78,58 16,24 45,45 9,53 132 258,5 

K.188 -P5 (286) 296 476 400 108 197 378 433 183 302 357 53,975 110 88,9 11,1 59,58 12,7 135 282 

(324) 342 557 480 142 223,5 463 493 - - - 53,975 140 88,9 11,1 59,58 12,7 147 339,5 

(326) 342 557 480 142 223,5 463 493 - - - 53,975 140 88,9 11,1 59,58 12,7 147 339,5 

(364) 396 557 480 161 193,5 493 523 - - - 60,325 140 107,95 17,05 67,36 15,875 147 339 

(365) 396 557 480 161 193,5 493 523 - - - 60,325 140 107,95 17,05 67,36 15,875 147 339 

(213) 214 374 300 84 125 335 375 125 335 375 34,925 80 69,85 5,15 38,44 7,938 85 219,5 

(215) 214 374 300 84 125 335 375 125 335 375 34,925 80 69,85 5,15 38,44 7,938 85 219,5 

(254) 251 374 300 86 125 335 375 125 335 375 41,275 110 78,58 16,24 45,45 9,53 132 258,5 

(256) 251 374 300 86 125 335 375 125 335 375 41,275 110 78,58 16,24 45,45 9,53 132 258,5 

F.188B -P5 (286) 296 476 400 108 228 347 432 232 343 428 53,975 110 88,9 11,1 59,58 12,7 135 282 

(324) 342 557 480 142 196,5 390 420 223,5 463 493 53,975 140 88,9 11,1 59,58 12,7 147 339,5 

(326) 342 557 480 142 196,5 390 420 223,5 463 493 53,975 140 88,9 11,1 59,58 12,7 147 339,5 

(364) 396 557 480 161 192,5 419 449 187,5 424 454 60,325 140 107,95 17,05 67,36 15,875 147 339 

(365) 396 557 480 161 192,5 419 449 187,5 424 454 60,325 140 107,95 17,05 67,36 15,875 147 339 


P5 

[mm] 

7 - 47 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Gear Unit Weights 

The total weight of a unit can be calculated by adding its components. 

These weights are only approximate (+5%; -20%) 

Gear Units 

7 - 48 

KG LB KG LB KG LB 

E. 38 8,5 19 B. 28 5,5 12 C. 38 19 42 

E. 48 11 24 B. 38 18 40 C. 48 28 62 

E. 68 22 49 K. 38 16 35 C. 68 49 108 

E. 88 37 82 K. 48 21 46 C. 88 83 183 

E. 108 65 143 K. 68 42 93 

E. 128 96 212 K. 88 75 165 

E. 148 127 280 K. 108 134 295 

K. 128 215 474 

K. 148 320 705 

K. 168 520 1146 

K. 188 760 1676 

KG LB KG LB 

D./Z. 28 4 9 F. 28 5 11 

D./Z. 38 12,5 28 F. 38 14 31 

D./Z. 48 22 49 F. 48 22 49 

D./Z. 68 39,5 87 F. 68 42 93 

D./Z. 88 72 159 F. 88 76 168 

D./Z. 108 117 258 F. 108 122 269 

D./Z. 128 191 421 F. 128 209 461 

D./Z. 148 268 591 F. 148 300 661 

D./Z. 168 419 924 F. 168 472 1041 

D./Z. 188 510 1124 F. 188 686 1512 

Input Units 

KG LB KG LB KG LB 

A5 71 6 13 P5 143 27 60 K5TC 56 3 7 

A5 80 9 20 P5 145 27 60 K5TC 140 6 13 

A5 90 10 22 P5 182 36 79 K5TC 180 7 15 

A5 100 14 31 P5 184 36 79 K5TC 210 16 34 

A5 112 16 35 P5 213 111 245 K5TC 250 39 85 

A5 132 25 55 P5 215 111 245 K5TC 280 54 120 

A5 160 37 82 P5 254 125 276 K5TC 320 78 172 

A5 200 51 112 P5 256 125 276 K5TC 360 114 252 

A5 225 78 172 P5 286 211 465 

A5 250 88 194 P5 324 307 677 KG LB 

P5 326 307 677 KTC 56 14 31 

P5 364 327 721 KTC 140 14 31 

P5 365 327 721 KTC 180 19 42 

KTC 210 31 67 

KTC 250 54 118 

KTC 280 85 188 

KTC 320 131 289 

KTC 360 168 371 

Lubricant weight 

Mineral oil (CLP) = 0,9 kg/l (2lbs/l) 

Synthetic oil (PGLP) = 1,05 kg/l (2.3lbs/l) 

In order to know the oil volume, please refer to „OIL Type and Quantities“

Documentation 


8 - 1 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


8 - 2



Documentation 

Spare parts list One-stage helical gear units size 38 - 148 8 - 4 

Spare parts list Two and three-stage helical gear units size 38 - 188 8 - 5 

Spare parts list Bevel helical gear units size B38 8 - 6 

Spare parts list Bevel helical gear units sizes 38 - 188 8 - 7 

Spare parts list Parallel shaft helical gear units sizes 38B - 188B 8 - 8 

Spare parts list Helical worm gear units sizes 38 - 88 8 - 9 

Spare parts list MODULOG-Motors sizes 71 - 200 8 - 10 

Installation / Removal of hollow shaft gearmotors and gear units 8 - 12 

Suggested design for threaded washer and disc 8 - 13 

8 - 3 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Spare parts list One-stage helical gear units size 38 - 148 

8 - 4 

001 Gear unit housing 

101 Output shaft 

103 Spacer/bush 

105 Parallel key 

130 Bearings 

135 Locking ring 


140 Bearings 


160 Shaft seal 

201 Adapter plate 

205 Bolt 

210 Bolt 

211 Screw lock 

220 Seal 

225 Seal 

301 Plug-in pinion 

305 Gear wheel 


401 Screw plug 

420 Breather filter 

430 Eye bolt

Spare parts list Two and three-stage helical gear units size 38 - 188 

001 Gear unit housing 220 Seal 

020 Bearings 225 Seal 

025 Locking ring 301 Plug-in pinion 

030 Bearings 305 Gear wheel 

050 Housing cover 306 Parallel key 

051 Bolt 315 Bearings 

055 Seal 320 Bearings 

101 Output shaft 325 Pinion shaft 

103 Spacer/bush 330 Gear wheel 

105 Parallel key 331 Parallel key 

130 Bearings 335 Locking ring 

135 Locking ring 340 Pinion shaft 


141 Supporting disk/shim 346 Parallel key 

144 Supporting disk/shim 401 Screw plug 

145 Locking ring 420 Breather filter 

160 Shaft seal 430 Eye bolt 

201 Adapter plate 

205 Bolt 

210 Bolt 

211 Screw lock 

215 Parallel pin 


8 - 5 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Spare parts list Bevel helical gear units size B38 

8 - 6 

001 Gear unit housing 205 Bolt 

020 Taper roller bearing 210 Nut 

022 Supporting disk/shim 220 Seal 

027 Locking ring 301 Plug-in pinion 

030 Taper roller bearing 305 Gear wheel 

031 Supporting disk/shim 320 Bevel-gear pair 

040 Output flange 331 Parallel key 

045 Bolt 351 Parallel key 

050 Housing cover 401 Screw plug 

051 Bolt 411 Bolt 

055 Seal 412 Spring washer 

090 Torque arm 413 Washer 

091 Rubber bush 415 Locking ring 

095 Bolt 418 Plug/sealing cap 

101 Output shaft 

130 Deep-groove ball bearing 

131 Supporting disk/shim 


140 Deep-groove ball bearing 

144 Supporting disk/shim 


160 Shaft seal

Spare parts list Bevel helical gear units size 38 - 188 

001 Gear unit housing 144 Supporting disk/shim 


022 Supporting disk/shim 160 Shaft seal 

027 Locking ring 201 Adapter plate 

030 Bearings 205 Bolt 

031 Supporting disk/shim 210 Bolt 

040 Output flange 211 Screw lock 

045 Bolt 220 Seal 

050 Housing cover 225 Seal 

051 Bolt 301 Plug-in pinion 

055 Seal 305 Gear wheel 

060 Bearings 320 Bevel-gear pair 

061 Supporting disk/shim 325 Bevel pinion shaft 

063 Nilos ring 327 Parallel key 

065 Locking ring 328 Locking ring 

070 Sealing cap 331 Parallel key 

090 Torque arm 335 Locking ring 

091 Rubber bush 340 Pinion shaft 

095 Bolt 345 Gear wheel 

096 Screw lock 346 Parallel key 

101 Output shaft 351 Parallel key 

130 Bearings 401 Screw plug 


133 Nilos ring 413 Washer 

135 Locking ring 415 Locking ring 

140 Bearings 418 Plug/sealing cap 

143 Nilos ring 420 Breather filter 


8 - 7 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Spare parts list Parallel shaft helical gear units size 38B - 188B 

8 - 8 

001 Gear unit housing 135 Locking ring 

020 Bearings 140 Bearings 

021 Supporting disk/shim 141 Spacer/bush 

022 Supporting disk/shim 143 Nilos ring 

025 Locking ring 144 Supporting disk/shim 


034 Nilos ring 160 Shaft seal 

040 Output flange 201 Adapter plate 

045 Bolt 205 Bolt 

050 Housing cover 210 Bolt 

051 Bolt 211 Screw lock 

055 Seal 220 Seal 

065 Sealing cap 225 Seal 

070 Sealing cap 301 Pinion 

091 Rubber bush 305 Gear wheel 

101 Drive shaft 306 Parallel key 

107 Bearings 307 Spacer/bush 


109 Locking ring 311 Supporting disk/shim 

110 Locking ring 325 Pinion shaft 

120 Shrink disc 330 Gear wheel 


129 Supporting disk/shim 340 Pinion shaft 



132 Spacer/bush 401 Screw plug 

133 Nilos ring 420 Breather filter

Spare parts list Helical worm gear units size 38 - 88 

001 Gear unit housing 201 Adapter plate 



032 Supporting disk/shim 211 Screw lock 

035 Locking ring 220 Seal 

037 Locking ring 225 Seal 

040 Output flange 301 Plug-in pinion 

045 Bolt 305 Gear wheel 

070 Sealing cap 331 Parallel key 

090 Torque arm 335 Locking ring 

091 Rubber bush 340 Worm shaft 

095 Bolt 345 Worm wheel 

101 Output shaft 346 Parallel key 

130 Bearings 401 Screw plug 


133 Nilos ring 412 Screw lock 

135 Locking ring 413 Washer 


143 Nilos ring 418 Plug/sealing cap 

144 Supporting disk/shim 420 Breather filter 

146 Locking ring 430 Eye bolt 

160 Shaft seal 


8 - 9 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Spare parts list MODULOG-Motors size 71 - 200 

8 - 10

Spare parts list MODULOG-Motors size 71 - 200 


101 Stator frame with core, unwound 502 Seal 

102 Stator frame with core, wound 503 Screw lock 

109 Plugs for cable slot 504 Bolt 

115 End sleeve / lug 506 Terminal box cover 

200 Rotor 507 Seal 

201 Shaft 508 Screw lock 

202 Rotor core 509 Bolt 

301 Bearing shield 511 Bolt 

305 Supporting disk / shim 512 Screw lock 

306 Bearing 513 Supporting disk / shim 

307 Locking ring 516 Complete terminal board 

308 Locking ring 517 Bolt 

312 Shaft sealing ring 518 Screw lock 

313 Oil splasher 519 Nut 

314 Supporting disk / shim 520 Supporting disk / shim 

325 Screw lock 521 Terminal connector 

326 Bolt 522 Terminal block 

329 Nut 523 Bolt 

338 Seal 530 Cable gland 

401 Bearing shield 531 Nut 

403 Bolt 532 Seal 

405 Supporting disk / shim 533 Cable / line 

406 Bearing 534 Screw plug 

412 Shaft sealing ring 539 Screw lock 

413 Shaft sealing ring 540 Rectifier 

415 Brake 553 Cable / line 

416 Screw lock 601 Fan 

417 Bolt 602 Tolerance ring 

418 Coupling driver 603 Locking ring 

419 Locking ring 605 Fan cover 

420 Supporting disk / shim 606 Screw lock 

421 Featherkey 607 Bolt 

422 Supporting disk / shim 615 Protective canopy 

423 Manual release 618 Damping disk 

424 Shaft sealing ring 701 Featherkey 

425 Screw lock 702 Bolt 

426 Bolt 703 Screw lock 

427 Fuse 705 Rating plate 

429 Nut 706 Bolt 

430 Complete cable gland 763 O-ring 

432 Friction disk 

433 Friction plate 

437 Grub screw 

438 Seal 

441 Supporting disk / shim 

472 Shaft end 

501 Terminal box base 

8 - 11 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Installation / Removal of hollow shaft gearmotors and gear units 

Installation of unit 

• Carefully clean anti-corrosion paint off the inside of the hollow shaft and off the machine shaft with cleaning benzine or 

solvent. (Ensure adequate ventilation) 

• Check the hollow and machine shaft for damaged seats or edges.Rework parts with a suitable tool and clean them again 

if necessary. 

Note: to prevent fretting corrosion, apply a mounting paste or a suitable lubricating medium (e.g. Calypsol H 443 HD88 grease) on 

the contact surfaces. 

• Fit the drive by means of a nut and a threaded rod. The support is realized by the hollow shaft. 

Important: - The hollow shaft must be perfectly aligned with the machine shaft to avoid canting. 

- With Flange or Face mounted units, there must not be any additional radial or axial stress on the shaft to prevent 

damage to the bearings. 

1 7 2 6 5 3 4 

8 - 12 

1 Machine shaft 4 Threaded rod 

2 Hollow shaft 5 Disc 

3 Hexagonal nut 6 Locking ring 


Parts 3 and 4 are not supplied by SIEMENS 

Note: A hydraulic lifting device may be used instead of the nut and threaded spindle shown above. 

Removal of unit 

Important: Before removal, an adequately dimensioned load suspension device should be mounted under the drive. The load 

suspension device should be slightly pre-tensioned to prevent the drive from falling into it when released from the machine shaft. 

• Remove axial safety device of the hollow shaft. 

• If rust is present on the seat surfaces, apply penetrating oil on these surfaces. 

• After the oil has penetrated, pull off the drive as outlined in the drawing below. 

Important: Make sure there is no canting during this operation. 

13 12 11 10 9 8 

8 Threaded rod 11 Parallel key 

9 Hexagonal nut 12 Threaded washer 

10 Hexagonal nut 13 Disc 

These parts are not supplied by SIEMENS

Suggested design for threaded washer (12) and disc (13) 


Size b10 b11 b12 d10 d11 s11 t max u 

28 0.12 0.59 0.39 

3 15 10 

38 0.24 0.59 0.39 

6 15 10 

48 0.24 0.59 0.20 

6 15 5 

68 0.28 0.79 0.28 

7 20 7 

88 0.28 0.79 0.39 

7 20 10 

108 0.39 0.94 0.39 

10 24 10 

128 0.39 0.94 0.20 

10 24 5 

148 0.39 0.94 0.28 

10 24 7 

168 0.39 1.18 0.31 

10 30 8 

188 0.39 1.18 0.43 

10 30 11 

d 10 = U (hollow shaft diameter) - 0.004” [0.1 mm] 

d 11 = U (hollow shaft diameter) x 0.55 

s 11 tap = M (hollow shaft bolt) 

t max = UY - 0.016” [ 0.4 mm] 

u = Y (hollow shaft keyway width) 

8 - 13 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca

MOTOX Geared Motors 

Gear motors 1275 Newton, local 15 

9 - 1 

(450) 655-7447 


www.dstech.ca 


Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


9 - 2



Gear Motors 

Modular System 9 - 4 

Combination of additional features, built-in and attached elements 9 - 6 

Standards and specifications 9 - 7 

EC-Directives 9 - 8 

International Regulations 9 - 10 

Smooth running / vibration characteristics, Motor noise levels 9 - 12 

Electrical Data 9 - 13 

Motor Duty Cycles according to EN 60034-1 9 - 14 

Speed, Rated current, Legally prescribed minimum efficiency levels 9 - 17 

Tolerances, Direction of rotation, Insulation 9 - 18 

Electrical connection 9 - 19 

Motors with plug box 9 - 20 

Motor protection 9 - 21 

Anti-condensation heating - Mechanical Data 9 - 22 

Mechanical data 9 - 23 

Cooling and ventilation 9 - 24 

Terminal box 9 - 25 

Second motor shaft extension 9 - 28 

Ecofast 9 - 30 

Brakes 9 - 32 

Brake selection 9 - 33 

L ... N/G-Brakes, Micro-switch 9 - 34 

Technical Data 9 - 35 

Adjustment of braking torque 9 - 36 

Brake Voltages 9 - 37 

Location of Manual Release of Brakes 9 - 38 

Finding the correct brake 9 - 40 

Dimensions, Standard Motor with or without brake 9 - 42 

Additional lengths for 2nd shaft entension, Handwheel, Canopy and Encoder 9 - 48 

Additional lengths for rugged encoder 9 - 50 

Additional lengths for forced ventilation, encoder and canopy 9 - 51 

Additional lengths for encoder mounting prepared 9 - 52 

Electric Motor Types, Data 9 - 54 

9 - 3 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Electrical Section, Motors 

9 - 4 

MOTOX-N 

Modular geared motor

Modular System 

Three-phase squirrel cage induction motors 

Output ratings : 

- 0.12 hp to 125 hp [0.09 kW to 90 kW] 

Designs: 

- Gear motor MOTOX Types / Frame sizes LA71 to LGI280ZMB 

Additional features, built-in and attached elements: 

- second motor shaft extension 

- protection cover 

- brake 

- external fan 

- backstop 

- encoder system 

- ... other on request. 


9 - 5 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Combination of additional features, built-in and attached elements 

Second motor shaft 

extension 

9 - 6 

Second motor 

shaft extension 

Protection 

cover 

Brake External fan Back stop 

Encoder 

system 

- - - 

Protection cover - - 

Brake - 

External fan - 

Back stop - 

Encoder system - - 

- not possible 

possible without restrictions 

1 

2 

Note 

on request as a special design 

only possible with external fan 

All above mentioned motor options can be attached or built-in, now or later, to the MODULOG-Motors, frame size LA71 to LG200, i.e. 

the motors are modifiable or retrofitable even after installation and putting into operation.

Standards and specifications 


The motors comply with all appropriate international (IEC-), American (NEMA-, CSA-, UL-R-), European (EN-, CENELEC-) and national 

(DIN/VDE-) standards: 

Overview 

IEC EN / HD DIN / VDE Title 

IEC 60027-4 HD 245.4 DIN 1304-7 Symbols to be used for electrical machines 

IEC 60034-1 EN 60034-1 

IEC 60034-2 EN 60034-2 

IEC 60034-5 EN 60034-5 

IEC 60034-6 EN 60034-6 

IEC 60034-7 EN 60034-7 

IEC 60034-8 EN 60034-8 

IEC 60034-9 EN 60034-9 

IEC 60034-12 EN 60034-12 

IEC 60034-14 EN 60034-14 

IEC TS 60034-17 - 

DIN EN 60034-1 

VDE 0530-1 

DIN EN 60034-2 

VDE 0530-2 

DIN EN 60034-5 

VDE 0530-5 

DIN EN 60034-6 

VDE 0530-6 

DIN EN 60034-7 

VDE 0530-7 

DIN EN 60034-8 

VDE 0530-8 

DIN EN 60034-9 

VDE 0530-9 

DIN EN 60034-12 

VDE 0530-12 

DIN EN 60034-14 

VDE 0530-14 

DIN IEC / TS 

60034-17 

VDE 0530-17 

Rotating electrical machines: 

- Rating and performance 

- Methods for determining losses and efficiency of rotating electrical machinery from tests 

(excluding machines for traction vehicles) 

-Degrees of protection provided by the integral design of rotation electrical machines (IP 

code) - Classification 

- Methods of cooling (IC-Code) 

-Classification of types of constructions, mounting arrangements and the terminal box position 

(IM code) 

- Terminal markings and direction of rotation 

- Noise limits 

-Starting performance of single-speed three- phase cage induction motors 

-Mechanical vibration of certain machines with shaft heights 56 mm and higher 

-Cage induction motors when fed from converters - Application Guide 

IEC 60038 HD 472 DIN IEC 60038 IEC standard voltages 

- EN 50347 DIN EN 50347 General purpose 3 phase induction motors having standard dimensions and outputs. 

IEC 60085 HD 566 DIN IEC 60085 Thermal evaluation and classification of electrical insulation 

IEC 60445 EN 60445 DIN EN 60445 Identification of equipment terminals and of terminations of certain designated conductors 

IEC 60529 EN 60529 

DIN EN 60529 

VDE 0470-1 

Degrees of protection provided by enclosures (IP-Code) 

- EN 50262 DIN EN 50262 Metric cable glands for electrical installations. 

- - EDIN 42925 

Terminal box cable entries for three-phase cage induction motors at rated voltages 400V to 

690V. 

NEMA CSA UL-R Title 

MG 1 - - Motors and Generators 

- C22.2 No. 100 - 95 - Motors and Generators 

- C22.2 No 0 - General Requirements - Canadian Electrical Code Part II 

- C22.2 No 25 - Enclosures for Use in Class II Groups E, F and G - Hazardous Locations 

- C22.2 No 30 - Explosion-Proof Enclosures for Use in Class 1 Hazardous Locations 

- C22.2 No 77 - Motors with Inherent Overheating Protection 

- C22.2 No 145 - 

Motors and Generators for Use in Hazardous Locations Class I Groups C and D, 

Class II Groups E, F and G 

- - UL 1004 Electric Motors 

9 - 7 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


EC-Directives 

In addition to the previous standards all applicable harmonised standards for motors, geared motors and gear units are taken into consideration 

to put the EC-Directives shown below into action. These standards are published by the EC-Commission in the Official Journal 

of the European Community. 

EC-Directives: 

• 73/23/EEC 

Low voltage directive "LVD", 

changed by 93/68/EEC, changed by GPSG (Equipment and Product Safety Act) 

(Electrical machinery tools for use within certain voltage limits) 

• 89/336/EEC 

EMC-Directive "EMCD", 

changed by 91/263/EEC, 92/31/EEC and 93/68/EEC, 

changed by GPSG(Equipment and Product Safety Act) 

(Electromagnetic Compatibility) 

• 98/37/EC 

Machine Directive "MD", codified, changed by GPSG (Equipment and Product Safety Act) 

Applied standards: 

Within the scope of the Low voltage directive "LVD": 

EN 60204-1 

Within the scope of the EMC-Directive "EMCD": 

EN 55011, EN 55014 and standards from EN 61000 

Within the scope of the Machine Directive "MD": 

EN 292-1, EN 292-2, EN 294, EN 349, EN 563, EN 60204-1 

The CE-Marking (based on the LVD and EMCD) of the motors is used since December 1995. 

The Conformity Declarations and the complete product documentation are archived by us in accordance with the rules of the EC- 

Low Voltage and EMC-Directives (1. GSGV and EMVG). 

Manufacturer Declarations (based on the MD) are to be found in the corresponding operation manuals. 

On request, seperate Manufacturer Declarations can be ordered from your corresponding Sales Centre. 

9 - 8

Motor Challenge Program 

Motor Challenge Endorser 


The Motor Challenge program is a program of the European commission for helping industrial enterprises to improve the energetic 

efficiency of its engine systems. 

The program addresses itself to all users and manufacturers of engines and planners of equipements, which are operated with electric 

motors. 

Participating companies commit themselves in the context of a plan of action to the identification and realization of energy saving measures. 

The European commission convinced itself of the quality and effectiveness of the action and promotion plan of FLENDER TÜBINGEN. 

To 07.10.2003 the Endorser status was conferred. 

Branch specific regulations 

VIK design 

The motors can be supplied in accordance with the "technical requirements" of the VIK (Association of Industrial Power Generators). 

Maritime regulations 

The motors are available in accordance with the following regulations: 

- ABS American Bureau of Shipping 

- BV Bureau Veritas 

- GL Germanischer Lloyd 

- LR Lloyd's Register of Shipping 

- DNV Det Norske Veritas 

- RINa Registro Italiano Navale 

9 - 9 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


International regulations 

North America regulations 

Design of the motors to following North America approvals is possible (extra Charge): 

NEMA 

National Electrical Manufacturing Association 

Canada and USA 

C US 

CSA-C/US design (formerly: CSA-NRTL/C): 

Compliance with all related U.S. Standards as identified by the OSHA, U.S. Dept. of Labor and all related CSA Standards, is CSA 

certified. 

Motors LA71 to LA160 

Brakes L, A 

External fan units 

Canada 

CSA design: 


Motors LG180 to LG280 

Brakes L, A 

External fan units 

Energy Efficiency Verification 


Hazloc (Division System) 

Class I Division 1 Groups A, B, C, D T4 

Temperature Code 

T3 : (200 °C) 

T4 : (135 °C) 

T5 : (100 °C) 

Gas groups 

A : acetylene B: hydrogen C : ethylene D : propane 

Dust groups 

E : metal dust T : coal dust G : grain dust 

Area classification 

Division 1:A location where a classified hazard is likely to exist. 

Division 2:A location where a classified hazard does not normally exist but is possible 

under abnormal conditions. 

Flammable gas or vapour 

Class I: A location where a quantity of flammable gas or vapour, 

Motors M71 to M160 sufficient to produce an explosive or ignitable mixture, may be present in the air. 

Class I Division 2 groups B, C, D, T3 Class II: A location made hazardous by the presence of combustible or electrically 

Class II Division 2 groups F, G, T3 conductive dust, including groups E, T, G 

USA and Canada 

UL-C/US design: 

Compliance with all related U.S. Standards as identified by the OSHA, U.S. Dept. of Labor and all related CSA Standards, are UL 

certified. 


USA 

UL design: 

Mechanical design of motors with (Component-Motors) 


9 - 10 

 

 

 

C US

Chinese regulations 

VR China 

CCC: China Compulsory Certification 


Russian regulations 

Russia 

GOST-R-Design 





Three phase-asynchronous motors and single phase AC motors with squirrel cage for low voltage 

CAVEX ® -Worm Gear Units 


9 - 11 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Smooth running / vibration characteristics 

In all motors, the rotors are balanced dynamically at operating speed. A maximum of running smoothness and minimum of vibration 

is also achieved through the careful selection of roller bearings and precise observation of fits. The motors in catalogue correspond to 

vibration level A according to DIN EN 60034-14. At the customer's request, the vibration level design B can be supplied. 

Motor noise levels 

All motors meet the requirements of DIN EN 60034-9. 

As a rule motor noise levels are below given limits by 10...15%. 

Measuring surface-sound power level at rated load and 60Hz 

Motor Measuring surface measurement 

LWA 

9 - 12 

dB 

Measuring surface-sound pressure level L pfA for three-phase motors 

with squirrel cage rotor 

4 pole 

dB (A) 

LA71B/C/S/M 48 59 

LA71ZM 50 61 

LA80 51 62 

LA90S 52 64 

LA90ZL 54 66 

LA100ZL 57 69 

LA112ZM 57 69 

LA132S/ZM.E 66 78 

LA132ZM 68 80 

LA160M/ZL 70 82 

LG180ZM/ZL 64 77 

LG200L 66 79 

LG225S/ZM/ZY 64 77 

LG250ZM 65 79 

LGI280ZM 71 84 

Acoustic power level (A) L wA = L pfA + L S 

All values quoted for L pfA can vary by +3 dB (A). 

Note: 

The specified values apply to motors only. 

During the interaction with the gear, each of the noise levels L pfA and L S generally increases to an average of 3-5 dB (A). 

However, this depends upon: 

- gear type 

- speed and transmission ratios 

- construction types 

- other influencing factors 

Please enquire for more specific information.

Electrical Data 

Rated Power 


Ratings are coordinated with frame sizes according to EN 50347. The motor power data indicated in this list refer to continuous operation 

(S1) and a frequency of 60Hz. Temperature rise lies within the limits of the specifications as per EN 60034-1 at rated power and at 

rated voltage and rated frequency in continuous operation. 

Installation altitude up to 3280 ft (1000 m) above sea level with a maximum ambient temperature of 104 °F (40°C). Overload capacity 

in accordance with EN 60034-1. 

Motor design for ambient (coolant) temperatures > 104 °F (40°C) at rated power is possible on request (at extra charge). 

Output changes for abnormal 

coolant temperature 

or altitudes 4 pole motor 

Service Factor 

% of rated power 

68°F 86°F 104°F 122°F 140°F 158°F 

20°C 30°C 40°C 50°C 60°C 70°C 

0-3280 7380 11485 13125 ft 

0-1000 2250 3502 4002 m 

Coolant temperature normal up to 104°F (40°C) 

Altitude normal up to 3280 ft (1000 m) altitude above 

sea level 

The service factor is a measure of continuous overload capacity at which a motor can operate without overload or damage. The 

standard service factor for MODULOG Motors is 1.15. 

9 - 13 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Motor Duty Cycles according to EN 60034-1 

The output ratings stated in the performance tables apply to duty type S1 (continuous running with constant load). All types of duties 

are described below. 

1. Duty types where starting or electrical braking do not influence the T° rise of the motor 

Duty type S1 

Working at constant load, long enough to reach 

thermal equilibrium. 

tN= running at constant load 

9 - 14 

Load 

Electrical losses 

Temperature 

Electric. 

losses 

T° 

Load 

Load 

Electrical losses 

Temperature 

Duty type S2 

Working at constant load, during a certain period of time, which is shorter 

than required to reach thermal equilibrium, followed by a period of rest long 

enough for the motor to cool down to ambient temperature. 


Duty type S3 

Sequence of identical cycles, each one include a running period at constant 

load, and a period of rest. Thermal equilibrium is not achieved during a 

working cycle. Temperature rise is not significantly influenced by the 

starting current. 


tR= rest

Elec. 

losses 

T° 

Load 

2. Duty types where starting or electrical braking influence the T° rise of the motor 

Elec. 

loss. 

T° 

Load 

Duty type S4 

Sequence of identical duty cycles, consisting of a starting period, a 

running period at constant load, and a period of rest. Thermal equilibrium 

is never reached during the cycle. 

tD=start / tN=running at constant load / tR=rest 


Duty type S6 

Sequence of identical duty cycles, consisting of a running period at constant 

load and a running period at no load, with no period of rest. 

tN=running at constant load 

tV=running at no load 

Elec. 

loss. 

T° 

Load 

Duty type S5 

Sequence of identical duty cycles, consisting of a starting 

period at constant load, a period of rapid electric braking 

and a period of rest. Thermal equilibrium is never reached 

during the cycle. 

tD=start / tN / tF=electric braking / tR=rest 

9 - 15 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


9 - 16 

Load 

Elec. 

loss. 

T° 

Duty type S7 

Sequence of identical duty cycles, each one consisting of a 

starting period, a running period at constant load and a period 

of electric braking. There is no period of rest. 

tD=start 

tN=running at constant load 

tF=electric braking 

T° 

Rotational 

speed 

Load 

Elec 

loss 

Duty type S8 

Sequence of identical duty cycles, each one consisting of a 

starting period, followed by running periods at constant load 

corresponding to different rotational speeds. There is no 

period of rest. 

tD=start 

tN1, tN2, tN3=running at constant speed 

tF1, tF2=electric braking

Speed 


The rated speeds shown in the data sheets are valid for 60 Hz. The rated speed equals synchronous speed less slip speed. 

The following speeds result from the number of poles and the main frequency of 60 Hz: 

Rated current 

No. of poles Synchronous speed at mains frequencies 

n (60 Hz) 

[rpm] 

2 3600 

4 1800 

6 1200 

8 900 

10 720 

12 600 

16 450 

The rated currents shown in the tables are valid for nominal voltage as shown. The rated currents of motors wound for different voltages 

vary in inverse proportion to the voltages: 

U 

----- 

U′ 

I′ 

--= 

I 

From this it follows that: 

I′ = 

U ⋅ I 

--------- 

U′ 

Legally prescribed minimum efficiency levels 

In 1997 a law was passed concerning the introduction of minimum efficiency levels for three-phase low-voltage motors (EPACT). A 

broadly similar law, based, however, on a different verification process, is in effect in Canada. Efficiency in the case of these motors 

is determined for the USA according to IEEE 112, Test Method B, and for Canada according to CSA-C390. With a few exceptions all 

three-phase low-voltage motors to be exported to the USA and Canada must conform to the legal efficiency requirements. The law 

requires minimum efficiency levels for motors with a voltage of 230 and 460 V/60 Hz, in the power range 1 to 200 HP (0.75 to 160 kW) 

and 2, 4 and 6 poles. Explosion-protected motors are also included. 

Excluded from the efficiency requirements according to EPACT are e.g.: 

1. Motors whose size-power classification does not conform to the standard series according to NEMA MG1-12. 

2. Flange-mounted motors. 

3. Brake motors. 

4. Inverter motors. 

5. Motors with design letter C and above. 

For further information on EPACT: http://www.eren.doe.gov/ 

Special requirements for the USA: Energy Policy Act. 

The law requires the nominal efficiency level at full load and a compliance certification (CC) number to be entered on the rating plate. 

The CC number is issued by the U.S. Department of Energy (DOE). EPACT motors requiring marking have the following information 

stamped on the rating plate: 

nominal efficiency level, design letter, code letter, CONT, CC 032A (Siemens) and NEMA MG1-12. 

Special requirements for Canada: CSA Energy Efficiency Verification 

These motors satisfy the minimum efficiency requirements in accordance with CSA Standard C390. 

Motors which satisfy the requirements must also have the CSA-E mark on the rating plate. 

9 - 17 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Tolerances 

The following tolerances apply to the electrical values of the rating tables, according to EN 60034-1: 

Efficiency: 

≤ 50 kW / 67 hp : - 0.15 (1 - η) 

> 50 kW / 67 hp : - 0.1 (1 - η) 

Power factor: 

- 

1 

---------------------- 

– cosϕ 

6 

(minimum 0.02 / maximum 0.07) 

Slip at nominal load and operating temperature: 

±120 % of nominal slip at P N ≥ 1 kW / 1.34 hp 

± 30 % of nominal slip at P N < 1 kW / 1.34 hp 

Starting torque: -15 % and +25 % 

Break-away torque: -10 % without upper limit 

Starting current: + 20 % without lower limit 

Moment of inertia (of motor): ± 10% 

Direction of rotation 

The motors can be operated in both directions of rotation. If the phases are connected in the sequence L1, L2, L3 to the motor terminals 

T1, T2, T3, the motor turns clockwise. The direction of rotation can be reversed by interchanging any two phase conductors. 

If a particular rotational direction is required, e.g. at the driven shaft of the gear, or the drive is equipped with a back stop, please specify 

these details in the order. 

Insulation 

The stator windings of the motors are manufactured in thermal class F, temperature rise is calculated to thermal class B. 

High-quality enamelled wires, suitable surface insulating materials and the type of impregnation go together to make insulating systems 

for the motor windings which guarantee high mechanical and electrical strength combined with excellent service ability and a 

long service life. These insulating systems protect the winding to a large extent against the influence of aggressive substances. They 

can withstand loads under normal climates according to DIN 50014 and are tropicproof up to a relative air humidity of 92%. In the 

case of higher air humidity or damp alternating atmospheres according to DIN 50016, which also occur in tropical zones, the special 

design with increased moisture-proofing or increased tropical protection is required. 

In such cases, an additional internal anti-corrosive agent is recommended. 

9 - 18

Electrical connection 

Motor connection - Example 


The motors normally have a terminal board with 6 or 9 terminals and one earth terminal depending on the voltage. The stator winding 

can be connected for proper operation by repositioning the connecting bridges. For star delta starting, the operating voltage must be 

specified; the operating circuit of the motor must in this case be the delta circuit. 

9 - 19 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Motors with plug box 

Standard pin definition 

Pin definition plans for pole-changeable motors, different connections and additional features on request. 

9 - 20

Motor protection 

Available as optional extra. 

1. Temperature sensors (PTC...) 

(For all motors) 


Temperature sensors which are embedded in the stator windings change their resistance rapidly upon reaching a preset temperature, 

activating a control relay. 

Connection sample: 

2. Winding protection contacts (WT...) 

(Motors to LA112) 

On reaching a pre-determined temperature thermal contacts open (normally closed). Normally they are connected with the retaining 

circuit of motor relay. 

Connection sample: 

1TP1 (P1) - 1TP2 (P2): 

U max. = 2.5 V 

1TB1 (P3) - 1TB2 (P4): 

U max. = 250 V AC 

I max. = 1.6 A 

9 - 21 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Anti-condensation heating 

Anti-condensation heaters can be fitted to motors whose windings are exposed to the ambient climate, e.g. stationary motors in a damp 

environment or motors subjected to considerable temperature fluctuations. Anti-condensation heating must not be switched on during 

operation. 

Instead of an anti-condensation heater, another possibility (at no extra cost) is the connection of a voltage that is approximately 4 to 

10 % of the rated motor voltage to stator terminals U1 and V1; 20 to 30 % of rated motor current is sufficient to heat the motor. 

Motor size Heating capacity in watts (W) 

71 12.5 

80 25 

90 … 112 50 

132 … 160 100 

180 … 200 55 

225 … 250 92 

280 … 315 109 

Mechanical data 

Housing 

Sturdy design with ribs for surface cooling. 

Aluminium pressure die-casting frame to size LA160ZLP, grey cast iron from LG180ZMB. 

Feet 

Additional feet can also be mounted on motors of sizes 100 to 160. This enables additional components, such as distributor boxes 

etc., to be mounted. The mounting dimensions comply with EN 50347 

Internal corrosive protection 

On order, the surface in the housing of the motor can be equipped with a internal corrosive protection. 

The internal corrosive protection should be used when Anti-condensation heating is used. 

9 - 22 

Diagram of connection for anti-condensation heating

Mechanical data 


Degrees of motor protection to EN 60034-5** ** Refer only for the motors. 

Degrees of gear protection to EN 60529. The gears are equipped with a breather. This could cause, their degree of protection to be 

different from that of the motor. If this is of concern, please provide our office with the operating conditions for a new selection. 

Standard degree of motor protection is IP55, higher degree of protection upon request. 

First Number Protection against solid objects Second Number Protection against liquid 

IP Test IP Test 

0 no protection 0 no protection 

1 protected against solid objects up to 50mm 

(2”), e.g. accidental touch by hands 

2 protected against solid objects up to 12mm 

(0.5”), e.g. fingers 

3 protected against solid objects over 2.5mm 

(0.1”) [tools and wires] 

4 

Example for designation of type 

of protection: 

Letter symbols 

1. numeral 

2. numeral 

protected against solid objects over 1mm 

(0.04”) 

[tools, small wires] 

5 protected against dust-limited ingress 

(no harmful deposit) 

6 totally protected against dust 6 

1 protected against vertically falling drops of 

water, e.g. condensation water 

2 protected against direct sprays of water up 

to 15° from the vertical 

3 protected against sprays to 60° from the 

vertical 

4 protected against water sprayed from all 

directions-limited ingress permitted 

5 protected against low pressure jets of water 

from all directions-limited ingress permitted 

7 

8 

IP 5 5 

protected against strong jets of water, e.g. 

for use on ship decks-limited ingress 

permitted 

protected against the effects of immersion 

between 

15cm (6”) and 1m (3.3ft.) 

protected against long periods of immersion 

under pressure 

Note: Protection IP65 is no longer common for rotating electrical machines, but it might be applied, according to EN 60529 if an 

improvement is required. 

Cables passage 

According to the degree of protection IP56 and IP66, the cable passage from the terminal box to the motors inner space is filled with 

a PU-sealing compound. Also on request, according to the degree of protecion IP56 and IP65, the cable passage can be casted (extra 

charge). 

9 - 23 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Cooling and ventilation 

The motors have radial-flow fans, which cool regardless of the 

direction of rotation of the motor (cooling method IC 411 acc. to 

DIN EN 60034-6). The air flows from the non-drive end to the 

drive end. 

9 - 24 

When the motor is mounted and the air intake is restricted, you 

must ensure that a minimum clearance is maintained between the 

fan cover and the wall and that the cooling air is not immediately 

drawn in again. 

Overview of possible module technology in conjunction with self ventilation and forced ventilation 

Self ventilation 

Motor 

plug 

Encoder system Brake Backstop2nd shaft 

extension 

Incremental 

encoder 

Absolute 

encoder 

Resolver Encoder 

under 

cover 

Encoder 

accessories 

Without 

manual 

release 

With manual Microswitch 

3) 

release 

Release 

monitoring 1) 

Wear 

monitoring 

2) 

Standard fan 

Metal fan 

High inertia fan 

Canopy 4) 

Forced ventilation 

4) 

4) 

Canopy 

1) Not in conjunction with L4, L8, L16 

2) On request 

3) Standard from SH225 

4) Only in conjunction with encoder under cover 

Self ventilation 

Standard fan 

The fan can either be a standard fan, metal fan, or high inertia fan. 

For design of the fan and the fan cover, see the table below. 

Motor 

size 

Fan Fan 

material 

No. 

of 

poles 

Fan cover 

material 1) 

71 ... 90 Standard fan Plastic 2 ... 8 Sheet metal 

Metal fan 2) Aluminum 2 ... 8 Sheet metal 

High inertia 

fan 2) 

Steel core 

with plastic 

fan blades 

4 ... 8 Sheet metal 


Metal fan Aluminum 2 ... 8 Sheet metal 

High inertia 

fan 

Grey cast 

iron 

4 ... 8 Sheet metal 


Metal fan Aluminum 2 ... 8 Sheet metal 


1) In the case of motors with a cooling-tower design 

without a backstop or brake, the fan cover is made 

from strong, corrosion-resistant, glass-fiber-reinforced 

plastic. 

2) Metal fan or high inertia fan are only in combination 

with brake or backstop possible for motors of size 71 

in design with IEC standard flange 

(IM) B5. 

High inertia fan 

High inertia fans as additional centrifugal mass are precision balanced 

(DIN ISO 1940) so that smooth running of the motors is not 

impaired. Typical applications are drives for traveling gear, conveying 

equipment, or in general for supporting soft starting and / or soft 

braking. 

A high inertia fan increases the moment of inertia of the motor according 

to the table below. 

Motor size J Z m Fan 

kgm 2 kg 

71 0.00171 1.38 

80 0.00279 1.75 

90S / 90L 0.00540 2.55 

100L 0.01160 3.30 

112M 0.02300 5.30 

132S / 132M / 132ZM 0.05620 9.10 

Metal fan 

As an alternative to the standard plastic fans, metal fans constructed 

of aluminum are available for motors up to size 200. 

Metal fans are used for special ambient conditions, for example, 

with possible debris or dirt particles such as wood shavings, 

textile fibers in the cooling air, or for motors specially designed for 

higher ambient temperatures (> 60 °C).

Motor connection and terminal boxes 

Overview of possible module technology in conjunction with motor connection and terminal boxes 

Encoder 

system 

Connection, circuit and terminal boxes 

Location and position of the terminal box 

The terminal box of the motor can be mounted in four different locations 

or positions. The position of the terminal box must 

always be viewed from the drive end of the motor. The standard terminal 

box position is on the right-hand side, with the cable entry at the 

bottom (1A). 

Only terminal box positions on the left, only cable entry positions on the right 


Brake Self ventilation 

Without 

manual 

release 

With manual release 3) 

Without locking 

mechanism 

With locking 

mechanism 4) 

Microswitch 

Release 

monitoring 1) 

Wear 

monitoring 2) 

Forced ventilation 

Backstop 2nd shaft 

extension 

Terminal box 

Harting connector 

1) 

Not in conjunction with L4, L8, L16 

2) 

On request 

3) Standard from SH225 

4) 

Standard for KFB brake 

A 

2 

3 1 

C 

C 

4 

Looking at DE 

A 

A C 

C 

A 

D 

Terminal box 

position 

Terminal box position Cable entry position 

C 

A 

Cable entry position Order code 

1 A M55 

B M56 

C M57 

D M58 

2 A M59 

B M60 

C M61 

D M62 

3 A M63 

B M64 

C M65 

D M66 

4 A M67 

B M68 

C M69 

D M70 

B 

G_D087_XX_00026b 

9 - 25 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Motor connection and terminal boxes (continued) 

Terminal box on non-drive end of motor 


Cable entry at position D is not always possible for some combinations of geared motors. In these cases, position DK can be selected as an alternative 

except for motor sizes 180 and 200. The terminal box is then mounted on the non-drive end of the motor. 

Motor Gearbox 

Size 

Helical gearbox E. and Z. Helical gearbox D. Parallel shaft gearbox FZ./ 

FD. and 

bevel helical gearbox K. 

E., D./Z., Terminal box position 

Helical-worm gearbox C. 

B., K., C. FZ./FD. 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 

LA71 38 

48 48B 

68 68B 

88 88B 

LA80 48 

68 68B 

88 88B 

108 108B 

LA90 48 

68 68B 

88 88B 

108 108B 

128 128B 

LA100 48 

68 68B 

88 88B 

108 108B 

128 128B 

148 148B 

LA112 48 

68 68B 

88 88B 

108 108B 

128 128B 

148 148B 

LA132 88 88B 

108 108B 

128 128B 

148 148B 

168 168B 

188 188B 1) 1) 1) 1) 

208 

LA160 108 

128 128B 

148 148B 

168 168B 

188 188B 

208 

LG180 148 148B ⊗ ⊗ ⊗ ⊗ 

168 168B ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ 

188 188B ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ 

Position DK instead of D 

⊗ Neither D nor DK possible 

1) Only for FZ./FD.188B 

208 ⊗ ⊗ ⊗ ⊗ 

9 - 26

Motor Gearbox 

Size 

LG200 128 128B ⊗ ⊗ ⊗ 

148 148B ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ 

168 168B ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ 

188 188B ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ ⊗ 

208 ⊗ ⊗ ⊗ ⊗ 

LG225 128 128B 

148 148B 

168 168B 

188 188B 

208 

LG250 148 148B 

168 168B 

188 188B 

208 

LGI280 148 148B 

168 168B 

188 188B 

208 

LGI315 168 168B 

188 188B 

208 

Additional lengths for dimension HH in position DK 

Helical gearbox E. and Z. Helical gearbox D. Parallel shaft gearbox FZ./ 

FD. and 

bevel helical gearbox K. 

E., D./Z., Terminal box position 


No restrictions 

No restrictions 

Helical-worm gearbox C. 

B., K., C. FZ./FD. 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 

Position DK instead of D 

⊗ Neither D nor DK possible 

1) Only for FZ./FD.188B 

Standard position 

Position K 

(Terminal box 

on non-drive end 

of the motor) 

HH l 

Motor Additional lengths 

∆l 

LA71 53 

LA71Z 53 

LA80 73 

LA90 79 

LA90Z 124 

LA100 62 

LA100Z 132 

LA112 76 

LA112Z 104 

LA132 62 

LA132Z 108 

LA160 105 

LA160Z 153 

LG180 - 

LG180Z - 

LG200 - 

LG200Z - 

LG225 142 

LG225Z 202 

LG250 154 

LG250Z 224 

9 - 27 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

2nd shaft extension 

Overview of possible module technology in conjunction with 2nd shaft extension 



Motor plug Brake Backstop Encoder system Self ventilation Forced ventilation 

Without handwheel 

With handwheel 

For 4-pole motors a free, 2nd shaft extension can be supplied at the non-drive end. The 2nd shaft extension has a 60° center hole to DIN 332, Part 2 with 

M3 to M24 tapped hole depending on the shaft diameter. 

For a coupling output, the 2nd shaft extension can transmit the full rated power. Please also enquire about the transmittable power and permissible transverse 

force if belt pulleys, chains, or gear pinions are used on the 2nd shaft extension. A 2nd shaft extension cannot be provided if a rotary pulse encoder 

and / or an external fan has been mounted to the motor. 

Motor size DA EA Distance 

between fan 

cover and 

shaft 

shoulder 

EE 

EC 

EA 

DC EC EE FA GC 

71 14 30 4 DS M5 22 4 5 16.0 









225 55 110 4 DS M20 100 5 16 59 




ØDA 

DC 

FA 

GC 

9 - 28

2nd shaft extension (continued) 

Hexagonal recess 


All self-ventilated motors of sizes 71 to 160 with built-on brake or backstop have a hexagonal recess in the motor shaft extension at the non-drive end. 

Thus there is frequently no need for a handwheel. Use of a hexagonal recess is not possible for a rotary pulse encoder or 2nd shaft extension. 

S 

G_D087_XX_00057 

t1 

Motor size Wrench width SW 

S t 1 

mm mm 

LA71 6 9 

LA80 

LA90 

LA100 

LA112 10 12 

LA132 

LA160 

9 - 29 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Motor plugs 

ECOFAST motor plug system 


ECOFAST is a system which permits extensive decentralization and a modular structure for installation elements on the component level. 

Motors can be supplied with an ECOFAST HAN 10E motor plug in the standard or EMV designs.* 

An ECOFAST HAN 10B counterplug can also be supplied. 

With the basic design, the ECOFAST motor plug is connected in position B (see also page 8/11). The dimensions depend on the motor size. Particularly 

if a brake with a manual brake release 

lever is used, a check must be performed to ensure that the motor plug does not collide with the manual brake release lever in either direction (toward 

the non-drive end or the drive end). 

The main advantages of the ECOFAST motor plug over a terminal box with terminals are as follows: 

• Fast mounting of peripherals belonging to the 

ECOFAST system 

• Reduction of mounting and repair times for the end user 

• No wiring errors due to plug technology 

• Replacement of a geared motor without intervention in the electronics. 

Main features of the ECOFAST motor plug 

The motor plug is supplied ready for use and replaces the terminal box with terminal board. It comprises an angled plug housing, which can be rotated 

by 4 x 90°. A 10-pole (+ ground) male insert is used in the housing. 

The winding connections and, optionally, the power supply for the brake and the signal lines for the thermistors are connected in the plug housing. The 

ECOFAST motor plug is compatible with the products of the ECOFAST field device system. 

The motor connection (star or delta connection) is selected by the customer in the form of the counterplug used. All standard socket shells with a longitudinal 

interlock, size 10B, can be used as ECOFAST counterplugs. 

The ECOFAST motor plug is available for motor sizes 71 to 132 and can be used for line voltages at the motor plug ≤ 500 V and nominal currents ≤ 16 A. 

Technical data of the ECOFAST HAN 10E motor plug 

Contacts Number Max. voltage Max. current 

Degree of protection IP65 

Connection assignment 

U˜ max. 

Plug 

box 

Pin 

contacts 

6 

1 

U1(T1) 

U2(T4) 

I max. 

10 + e 500 V 16 A 

Plug housing type "HAN 10B" with 1 bracket 

7 

2 

8 

3 

9 

4 

V1(T2) 

+ + 

V2(T5) 

10 

5 

W1(T3) 

W2(T6) 

+ 

The HAN 10E motor plug complies with DESINA. 

G_D087_EN_00049 

Rectifier 

Brake 

+ - 

9 - 30

Motor plugs (continued) 

Dimensions of the motor plug 

Order codes: 

ØAC 

AG 

43 

6 7 8 9 10 

1 2 3 4 5 

ECOFAST motor plug HAN 10E N04 

ECOFAST motor plug HAN 10E 

with ECOFAST counterplug HAN 10B N05 

ECOFAST motor plug HAN 10E, EMC design N06 

ECOFAST motor plug HAN 10E 

with ECOFAST counterplug HAN 10B, 

EMC design N07 

Further information on the ECOFAST system is available on the Internet at: www.siemens.com/ecofast 

Motor plugs with customized connection assignment 

73 

LL 


Motor plugs are available with a different plug insert and customized connection assignment for motor sizes 71 to 132 

on request. 

G_D087_XX_00058a 

ADarr 

AD 

ADmax 

Motor size LL AG AC AD AD arr AD max 

71 91 104.6 139.0 131 150 154 

80 91 104.6 156.5 140 159 163 

90 91 104.6 174.0 148 167 171 

100 91 104.6 195.0 159 178 182 

112 91 104.6 219.0 172 191 195 

132 91 104.6 259.0 190 209 213 

9 - 31 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Brakes 

General 

Geared motors can optionally be supplied with built-in spring loaded disc brake on motor side. 

In spring loaded brake, the braking force is developed mechanically by spring action, so that it can be used (with additional parts) as 

safety brake for the purpose of complying with accident prevention regulations. 

The Brakes are released electrically via d.c. exicitation. For connection with single phase AC mains the brake motors are equipped 

with rectifier. Please specify supply voltage when ordering. 

All spring-loaded brakes can be supplied with manual release on request. This allows manual releasing of the brake, e.g. in the event 

of a power failure, or for positioning. 

Due to a generous air gap and a high resistance against wear a long brake service life is ensured, even without resetting feature. 

Braking torques refer to a speed of n = 100 rpm 

All brake linings are generally asbestos free. 

The brakes of size L32 can optionally be supplied with microswitch on request. 

Definition of operating times (VDI 2241) 

Operating times: 

t11= Response delay 

t12= Torque-rise space-of-time 

t1 = Engaging space-of-time 

t2 = Disengaging space-of-time 

t3 = Sliding time 

SEGE and SER switching devices can be integrated to reduce engaging time up to 6 times without any additional relays or leads. 

Details on request. 

9 - 32 

Excitation Rated torque 

0.9M k 

M k 

t11 

t1 

t12 

t3 

t2 

0.1M k 

‘off’ ‘on’ Time

Brake selection 

Motor Spring loaded single disc brakes ( DC excitation ) 

Brake 

types 

(N=normal, 

G=encapsulated) 

Nominal 

torque 


Braking torque 

Adjusted braking torques 

(other special adjustments are available upon request) 

[lb-in] [Nm] [lb-in] [Nm] [lb-in] [Nm] [lb-in] [Nm] [lb-in] [Nm] [lb-in] [Nm] 

71 L4N/G 35.4 4 12.4 1.4 17.7 2 26.6 3 44.3 5 

L8N/G 70.9 8 26.6 3 35.4 4 44.3 5 55.8 6.3 88.6 10 

80 L4N/G 35.4 4 12.4 1.4 17.7 2 26.6 3 44.3 5 

L8N/G 70.9 8 26.6 3 35.4 4 44.3 5 55.8 6.3 88.6 10 

90 L8N/G 70.9 8 26.6 3 35.4 4 44.3 5 55.8 6.3 88.6 10 

L16N/G 141.7 16 70.9 8 88.6 10 115.1 13 177.1 20 

100 L16N/G 141.7 16 70.9 8 88.6 10 115.1 13 177.1 20 

L32N/G 283.4 32 159.4 18 203.7 23 354.3 40 

112 L32N/G 283.4 32 159.4 18 203.7 23 354.3 40 

L60N/G 531.4 60 336.6 38 442.9 50 

132 L80N/G 708.6 80 221.4 25 310.0 35 442.9 50 558.0 63 885.7 100 

L150N/G 1328.6 150 531.4 60 708.6 80 885.7 100 1107.1 125 

160 L150N/G 1328.6 150 531.4 60 708.6 80 885.7 100 1107.1 125 

L260N/G 2302.8 260 1284.3 145 1594.3 180 1771.4 200 2125.7 240 

180 L260N/G 2302.8 260 885.7 100 1284.3 145 1594.3 180 1771.4 200 2125.7 240 

200 L260N/G 2302.8 260 885.7 100 1284.3 145 1594.3 180 1771.4 200 2125.7 240 

L400N/G 3542.8 400 2347.1 265 2657.1 300 3188.5 360 

For all combinations of brakes with motors listed in the selection row, the kB dimensions apply in the dimension sheets. 

Other combinations or other adjusted braking torques are possible on request. 

9 - 33 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


L ... N/G-Brakes 

Micro-switch (at L32 - L400) 

Brake with microswitch for release monitoring 

The brake's air gap s Gap is monitored by a microswitch which can be mounted on the base plate of the solenoid component. 

The motor does not start up until the brake has been fully released (s Gap =0) and the armature disk is lying against the solenoid component. 

The microswitch is actuated and triggers the motor contactor. 

When the brake is switched off, the armature disk reaches the maximum air gap (s Gapmax ) and the microswitch opens. 

This means that the motor contactor is not triggered and the motor does not start up. This method is used for machines and units which 

require a precisely defined startup and braking procedure, as well as for error monitoring of faulty rectifiers, broken connecting cables, 

faulty coils, and excessively large air gaps (brake coil does not attract the armature disk any further). 

Microswitches for release monitoring can be supplied for all brakes of sizes L32 to L400. Motors of size 225 and above with KFB brakes 

are equipped with release monitoring as standard. 

A combination with the anti-corrosion protection option is not possible. 

Brake with microswitch for wear monitoring 

While the brake is being used, the friction lining of the rotor is subjected to wear and becomes thinner. This means that the maximum 

air gap s Gapmax becomes larger and the brake requires a longer time to be fully released and applied. To prevent the friction lining 

becoming too thin (thickness falling below wear reserves) or the air gap from exceeding a predefined value, the air gap s Gap is monitored 

by a microswitch mounted on the base plate of the solenoid component. If the air gap fluctuates within a predefined range, the 

motor contactor is triggered. If an adjustable critical air gap is reached, the microswitch opens; 

the motor contactor is not triggered; motor and brake remain at zero current. This method is used for machines and units which employ 

braking operation very frequently and for which a high degree of wear is to be expected at a high number of startings, 

as well as for error monitoring of excessively large air gaps. 

Microswitches for wear monitoring can be supplied for all brakes of sizes L32 to L400 on request. 

A combination with the anti-corrosion protection option is not possible 

9 - 34 

Friction surface 

Armature disk 

Hub 

Axially shiftable 

rotor 

G_D081_EN_00076 

S Gap 

Solenoid 

assembly 

Pressure 

springs 

Shaft 

Pressure 

springs

Technical data 


T N =Braking torque, dynamical (n = 100 min -1 ) J br = Moment of inertia 

W 1max =Max. friction work per brake operation m br =Weight of brake 

P N = Perm friction work P 20 =Input power (20°C) 


W V =Air gap adjustment required after I br =Nominal current an 103V= 

S LSN =Nominal air gap t 2 =Release response time of brake 

S LSM 

Z N 

=Max. air gap 

= Number of possible adjustments 

t 1D 

t 1A 

=Engagement time of brake DC and AC switched 

(Fig.2) 

= Engagement time of brake 

Switched by AC only (Fig.1) 

Typ(e) L4 L8 L16 L32 L60 L80 L150 L260 L400 

TN 

W1max 

[lb-in] 35.4 70.8 141.6 283.2 531 708.1 1327.6 2301.2 3540.3 

[Nm] 4 8 16 32 60 80 150 260 400 

[ft-lb] 2.2 5.2 8.9 17.7 22.1 26.6 44.3 59 88.5 

[kJ] 3 7.5 12 24 30 36 60 80 120 

x10 3 [ft-lb/h] 175 277 354 531 620 717 885 1121 1328 

PN [kJ/h] 237 375 480 720 840 972 1200 1520 1800 

x10 6 [ft-lb] 27 48 80 157 175 292 451 690 1062 

WV [MJ] 36 64.8 108 212.4 237.6 396 612 936 1440 

SLSN 

SLSM 

[in] 0.008 0.008 0.008 0.012 0.012 0.012 0.016 0.016 0.020 

[mm] 0.2 0.2 0.2 0.3 0.3 0.3 0.4 0.4 0.5 

[in] 0.020 0.020 0.020 0.030 0.030 0.030 0.039 0.039 0.049 

[mm] 0.5 0.5 0.5 0.75 0.75 0.75 1 1 1.25 

ZN [-] 6 6 6 3 4 6 4 5 5 

x10 -2 [lb-ft 2 ] 0.03 0.08 0.47 1.07 1.5 3.56 6.88 17.33 47.46 

Jbr [kgcm 2 ] 0.11 0.34 2 4.5 6.3 15 29 73 200 

mbr 

P20 

[lb] 2 3.1 5.5 8.8 12.3 18.5 27.8 43 68.3 

[kg] 0.9 1.4 2.5 4 5.6 8.4 12.6 19.5 31 

[hp] 0.027 0.034 0.04 0.054 0.067 0.074 0.114 0.134 0.148 

[W] 20 25 30 40 50 55 85 100 110 

Ibr [A] 0.19 0.24 0.29 0.39 0.49 0.53 0.83 0.97 1.07 

t2 [ms] 45 57 76 115 210 220 270 340 390 

t1D [ms] 28 31 47 53 42 57 78 165 230 

t1A [ms] 190 245 460 490 580 1200 1080 2100 2400 

9 - 35 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Adjustment of braking torque: 

The motor with brake is supplied with a set braking torque T N . This can be reduced by unscrewing the adjusting ring using a hook 

spanner. Per notch of the adjusting ring, the braking torque T N is reduced by the amounts of following table. 

Type L4 L8 L16 L32 L60 L80 L150 L260 L400 

Reduction per notch 

Excess end of adjuster nut o max 

9 - 36 

[lb-in] 1.8 3.1 7.1 11.5 15.0 14.2 31.9 49.6 54.9 

[Nm] 0.2 0.35 0.8 1.3 1.7 1.6 3.6 5.6 6.2 

[inch] 0.18 0.18 0.30 0.37 0.43 0.39 0.59 0.67 0.77 

[mm] 4.5 4.5 7.5 9.5 11 10 15 17 19.5 

If required the brake is supplied with a set reduced or increased braking torque T rN as per following table. 

The reaction times change to t 1r and t 2r . 

* for 45° angle of twist 

Typ(e) L4 L8 L16 L32 L60 L80 L150 L260 L400 

[lb-in] 12.4 26.6 70.8 159.3 336.3 221.3 531 885 2345 

[Nm] 1,4 3 8 18 38 25 60 100 265 

[lb-in] 17.7 35.4 88.5 203.6 442.5 309.8 1283 2655 

[Nm] 2 4 10 23 50 35 - 145 300 

TrN 

[lb-in] 

[Nm] 

26.6 

3 

44.3 

5 

115.1 

13 

354 

40 - 

442.5 

50 

708.1 

80 

1593 

180 

3186 

360 

[lb-in] 35.4 55.8 177 557.6 885 1770 

[Nm] 4 6,3 20 - - 63 100 200 - 

[lb-in] 44.3 88.5 885 1106 2124 

[Nm] 5 10 - - - 100 125 240 - 

t2r [ms] t2r = TrN/TN x t2

Voltage 

These brakes can be operated on: 

1. DC network directly (U-) 

2. AC network with rectifier (U1~) 

3. AC network between phase and neutral (U1~) with rectifier 

4. AC network between 2 phases (U1~) with rectifier 

Standard voltages 

U-nominal (and range) 

[V] 

24 (± 10%) 

103 (92 - 110) 

180 (170 - 200) 

205 (194 - 218) 

U1~range 

[V] 

f 

[Hz] 


Type of rectifier or connection by 

- - 2 terminals 

23 - 29 

bridge 

50 / 60 

48 - 60 one way 


95 - 120 

bridge 

50 / 60 

190 - 240 one way 


190 - 220 

bridge 

50 / 60 

380 - 440 one way 


205 - 240 

bridge 

50 / 60 

410 - 480 one way 

When a choice has to be made between a one way and bridge rectifier, a one way rectifier should be preferred. 

Special voltages 

U-: 37 (33-43)V ... 250 (235-270)V 

or U1~: 37-48V ... 520-600V 

on request (extra charge) 

9 - 37 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Manual Brake Release 

Manual brake release lever position 

9 - 38 

D 

G_D087_DE_00001 

Manual brake release lever position 

Brakes can be supplied with a manual brake release lever. 

The manual brake release lever can be used to release the brake at 

zero current. When the brake has been released, the motor shaft can 

rotate freely in order to bring the output shaft to a certain position or 

for use as an emergency release in the event of a power failure, for 

example. 

The manual brake release lever can be fixed in the released position 

using an additional locking mechanism mounted on the brake. The 

manual brake release lever with locking mechanism is mounted on 

KFB brakes as standard. 

The manual brake release lever can be mounted in various different 

positions. The position of the manual brake release lever relates to the 

standard version of the motor. The standard position is "2". 

N 

3 

Manual brake 

release lever position 

1 2 3 4 

Motor size Angle a 

71 10° 100° 190° 280° 

71 / IEC-B5 10° 130° - 250° 

80 10° 100° 190° 280° 

90 15° 105° 195° 285° 

100 15° 105° 195° 285° 

112 15° 105° 195° 285° 

132 15° 105° 195° 285° 

160 15° 105° 195° 285° 

180 0° 90° 180° 270° 

200 0° 90° 180° 270° 

225 0° 90° 180° 270° 

250 0° 90° 180° 270° 

280 0° 90° 180° 270° 

315 0° 90° 180° 270° 

2 

4 

1 

α

Dimensions of the manual brake release lever 


The dimensions of the manual brake release lever depend on the size (see table) There is a possibility that the lever could collide with 

the connecting cable on motors where the cable entry is at the non-drive end. Please contact us if you have any questions. 

L1 

Motor size Brake size Terminal box 

position 

Distance from the center 

line of the motor to 

the outermost position 

of the manual brake 

release lever 

Dist. from center line of 

motor to outermost 

position of manual 

brake release lever, on 

design with locking 

mechanism 

LBLH-LBS 

G_D087_XX_00034b 

Distance from the center 

of the terminal box 

to the center of the 

manual brake release 

lever 

L1 L1 LBLH-LBS C 

71 L4 1A, 2A, 3A, 4A 107 127 124.8 12° 

L8 1A, 2A, 3A, 4A 116 136 125.3 10° 

71Z L4 1A, 2A, 3A, 4A 107 127 143.8 12° 

L8 1A, 2A, 3A, 4A 116 136 144.3 10° 

80 L4 1A, 2A, 3A, 4A 107 127 161.3 12° 

L8 1A, 2A, 3A, 4A 116 136 161.8 10° 

L16 1A, 2A, 3A, 4A 132 151 172.9 9° 

90 L8 1A, 2A, 3A, 4A 116 136 181.8 10° 

L16 1A, 2A, 3A, 4A 132 151 192.9 9° 

L32 1A, 2A, 3A, 4A 161 161 194.9 10° 

90Z L8 1A, 2A, 3A, 4A 116 136 155.8 10° 

L16 1A, 2A, 3A, 4A 132 151 166.9 9° 

L32 1A, 2A, 3A, 4A 161 161 168.9 10° 

100 L16 1A, 2A, 3A, 4A 132 151 197.4 9° 

L32 1A, 2A, 3A, 4A 161 161 199.4 10° 

L60 1A, 2A, 3A, 4A 195 195 203 9° 

112 L32 1A, 2A, 3A, 4A 161 161 213.9 10° 

L60 1A, 2A, 3A, 4A 195 195 217.5 9° 

132 L80 1A, 2A, 3A, 4A 240 240 232.0 10° 

L150 1A, 2A, 3A, 4A 279 279 245.1 9° 

132Z L80 1A, 2A, 3A, 4A 240 240 176.0 10° 

L150 1A, 2A, 3A, 4A 279 279 189.1 9° 

160 L150 1A, 2A, 3A, 4A 279 279 312.6 9° 

L260 1A, 2A, 3A, 4A 319 319 319.1 10° 

180 L260 1A, 2A, 3A, 4A 319 319 399.6 (410.6) 10° 

180Z L260 1A, 2A, 3A, 4A 319 319 277.6 (288.6) 10° 

200 L260 1A, 2A, 3A, 4A 319 319 361.9 10° 

L400 1A, 2A, 3A, 4A 445 445 371.7 10° 

Angle of the manual 

brake release 

lever when brake 

released 

Tolerance of +3° 

9 - 39 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Finding of the correct brake 

The braking torque T Br is defined through the following 

factors 

or: the maximum stopping distance 

or: security instructions 

(e.g. lifting appliance) 

For calculation formulas see "Engineering formulae" in our catalogue- introduction. 

If those data do not have to be taken into account: 

T Br ≈ 1 ... 1.5 • T Nmot 

(T Nmot = Rated torque of motor) 

With: W 1 = Friction work / Braking operation 

P = Z • W 1 Friction power (Z: Operating cycles) 

the following conditions have to be realized: 

9 - 40 

T Br ≤ T N 

W1 ≤ W 1max 

Px ≤ P N 

Number of possible operation cycles until readjustment of air gap: 

W 

V 

S = --------- 

W 

1 

T N , P N , W V and W 1max as per tables 

In any case, you should check after defining the brake size, the stress of the gear during the brake operation.


9 - 41 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Dimensions 

Standard Motors 

Motor Gearbox Type ka CX LB LBL Gearbox ka CX LB LBL P AB BU AA XA XB ADR 

E. Z. K C. FZ/FD 

type D 

0 1.59 7.26 9.43 0 1.59 7.26 9.43 

18 28 0 40.5 184.5 239.5 18 0 40.5 184.5 239.5 

0 2.30 7.97 10.14 0 2.30 7.97 10.14 

28 B28 28 0 58.5 202.5 257.5 28 0 58.5 202.5 257.5 

0 3.50 9.17 11.34 

B38 38B 0 89 233 288 

LA71 

38 38 38/48 38/48 48B 

1.00 4.51 10.18 

25.5 114.5 258.5 

12.34 

313.5 38 

1.59 

40.5 

5.10 10.77 

129.5 273.5 

12.93 

328.5 

5.47 

139 

5.47 

0.0 

146 

(1/2”+3/4”) 

3.54 

90 

3.54 

90 

- 

0.79 4.29 9.96 12.13 1.46 4.96 10.63 12.80 

48 48 68 68 68B 20 109 253 308 48 37 126 270 325 

0.55 4.06 9.72 11.89 1.28 4.78 10.45 12.62 

68 68 88 88 88B 14 103 247 302 68 32.5 121.5 265.5 320.5 

0.94 4.45 10.12 12.28 

88 24 113 257 312 

0 1.59 8.01 10.18 0 1.59 8.01 10.18 

18 0 40.5 203.5 258.5 18 0 40.5 203.5 258.5 

0 2.30 8.72 10.89 0 2.30 8.72 10.89 

28 B28 28 0 58.5 221.5 276.5 28 0 58.5 221.5 276.5 

0 3.50 9.92 12.09 

B38 38B 0 89 252 307 

LA71Z 

38 38 38/48 38/48 48B 

1.00 4.51 10.93 

25.5 114.5 277.5 

13.09 

332.5 38 

1.59 

40.5 

5.10 11.52 

129.5 292.5 

13.68 

347.5 

5.47 

139 

5.75 

0.0 

146 

(1/2”+3/4”) 

3.54 

90 

3.54 

90 

- 

0.79 4.29 10.71 12.87 1.46 4.96 11.38 13.54 

48 48 68 68 68B 20 109 272 327 48 37 126 289 344 

0.55 4.06 10.47 12.64 1.28 4.78 11.20 13.37 

68 68 88 88 88B 14 103 266 321 68 32.5 121.5 284.5 339.5 

0.94 4.45 10.87 13.03 

88 24 113 276 331 

0 3.48 10.63 13.13 

B38 38B 0.0 88.5 270 333.5 

1.00 4.49 11.63 14.13 1.59 5.08 12.22 14.72 

38 38 38/48 38/48 48B 25.5 114.0 295.5 359 38 40.5 129 310.5 374 

0.79 4.27 11.42 13.92 1.46 4.94 12.09 14.59 

LA80 

48 48 68 68 68B 20 

0.55 

108.5 

4.04 

290 

11.18 

353.5 

13.68 

48 37 

1.28 

125.5 

4.76 

307 

11.91 

370.5 

14.41 

6.16 

156.5 

6.10 

155 

0.0 (1/2”+3/4”) 

3.54 

90 

3.54 

90 

- 

68 68 88 88 88B 14 102.5 284 347.5 68 32.5 121 302.5 366 

-0.04 3.44 10.59 13.09 0.94 4.43 11.57 14.07 

88 88 108 108B -1.00 87.5 269 332.5 88 24 112.5 294 357.5 

0.71 4.19 11.34 13.84 

108 18 106.5 288 351.5 

Additional lengths for 2nd shaft extension, handwheel, canopy and encoder 

9 - 42 

mm 

Dimensions in inch

Dimensions 




E. Z. K. C. FZ/FD 

type D 

0 3.43 11.79 14.59 0 3.43 11.79 14.59 

28 B28 28 0 87 299.5 370.5 28 0 87 299.5 370.5 

0 3.48 11.85 14.65 

B38 38B 0 88.5 301 372 

1.00 4.49 12.85 15.65 1.59 5.08 13.44 16.24 

38 38 38/48 38/48 48B 25.5 114 326.5 397.5 38 40.5 129 341.5 412.5 

LA90S 

48 48 68 68 68B 

0.79 

20 

0.55 

4.27 

108.5 

4.04 

12.64 

321 

12.4 

15.43 

392 

15.20 

48 

1.46 

37 

1.28 

4.94 

125.5 

4.76 

13.31 

338 

13.13 

16.10 

409 

15.93 

6.85 

174 

6.42 

163 

0.0 (1/2”+3/4”) 

3.54 

90 

3.54 

90 - 

68 68 88 88 88B 14 102.5 315 386 68 32.5 121 333.5 404.5 

-0.04 3.44 11.81 14.61 0.94 4.43 12.80 15.59 

88 88 108 108B -1.00 87.5 300 371 88 24 112.5 325 396 

-0.49 2.99 11.36 14.15 0.71 4.19 12.56 15.35 

108 108 128 128B -12.5 76 288.5 359.5 108 18 106.5 319 390 

0.43 3.92 12.28 15.08 

128 11 99.5 312 383 

0 3.43 13.56 16.36 0 3.43 13.56 16.36 

28 B28 28 0 87 344.5 415.5 28 0 87 344.5 415.5 

0 3.48 13.62 16.42 

B38 38B 0 88.5 346 417 

1.00 4.49 14.63 17.42 1.59 5.08 15.22 18.01 

38 38 38/48 38/48 48B 25.5 114 371.5 442.5 38 40.5 129 386.5 457.5 

0.79 4.27 14.41 17.20 1.46 4.94 15.08 17.87 

LA90ZL 

48 48 68 68 68B 20 

0.55 

108.5 

4.04 

366 

14.17 

437 

16.97 

48 37 

1.28 

125.5 

4.76 

383 

14.90 

454 

17.70 

6.85 

174 

6.42 

163 

0.0 (1/2"+3/4") 

3.54 

90.0 

3.54 

90.0 

– 

68 68 88 88 88B 14 102.5 360 431 68 32.5 121 378.5 449.5 

-0.04 3.44 13.58 16.38 0.94 4.43 14.57 17.36 

88 88 108 108B -1.00 87.5 345 416 88 24 112.5 370 441 

-0.49 2.99 13.13 15.93 0.71 4.19 14.33 17.13 

108 108 128 128B -12.5 76 333.5 404.5 108 18 106.5 364 435 

0.43 3.92 14.06 16.85 

128 11 99.5 357 428 

0 5.08 16.42 19.61 

B38 38B 0 129 417 498 

1.00 6.08 17.42 20.61 1.46 6.54 17.87 21.06 

38 38 38/48 38/48 48B 25.5 154.5 442.5 523.5 48 37 166 454 535 

0.79 5.87 17.20 20.39 1.28 6.36 17.70 20.89 

48 48 68 68 68B 20 149 437 518 68 32.5 161.5 449.5 530.5 

LA100ZL 

68 68 88 88 88B 

0.55 

14 

5.63 

143 

16.97 

431 

20.20 

513 88 

0.94 

24 

6.02 

153 

17.36 

441 

20.55 

522 

7.68 

195 

6.61 

168 

0.0 (2x3/4") 

4.72 

120 

4.72 

120 

4.57 

116 

-0.14 4.94 16.28 19.74 0.71 5.79 17.13 20.31 

88 88 108 108B -3.5 125.5 413.5 501.5 108 18 147 435 516 

0.61 4.47 15.81 19.00 0.43 5.51 16.85 20.04 

108 108 128 128B -15.5 113.5 401.5 482.5 128 11 140 428 509 

-0.98 4.09 15.43 18.23 0.24 5.31 16.65 19.84 

128 128 148 148B -25 104 392 463 148 6 135 423 504 

mm 


9 - 43 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Dimensions 





E. Z. K. C. FZ/FD 

type D 

0.02 6.30 16.93 20.12 

38 38 38/48 38/48 48B 0.50 160 430 511 

1.06 6.06 16.69 19.88 

48 48 68 68 68B 27 154 424 505 

0.75 5.75 16.38 19.57 1.16 6.16 16.79 19.98 

LA112ZM 

68 68 88 88 88B 19 

0.02 

146 

5.02 

416 

15.65 

497 

18.84 

88 29.5 

0.81 

156.5 426.5 

5.81 16.44 

507.5 

19.63 

8.62 

219 

7.13 

181 

0.0 (2x3/4") 

4.72 

120 

4.72 

120 

4.96 

126 

88 88 108 108B 0.5 127.5 397.5 478.5 108 20.5 147.5 417.5 498.5 

-0.43 4.57 15.2 18.39 0.49 5.49 16.12 19.31 

108 108 128 128B -11 116 386 467 128 12.5 139.5 409.5 490.5 

-0.85 4.15 14.78 17.97 0.37 5.37 16.00 19.19 

128 128 148 148B -21.5 105.5 375.5 456.5 148 9.5 136.5 406.5 487.5 

0.02 7.74 18.03 22.05 

48 48 68 68 68B 0.5 196.5 458 560 

2.15 7.34 17.64 21.65 2.52 7.72 18.01 22.03 

68 68 88 88 88B 54.5 186.5 448 550 88 64 196 457.5 559.5 

1.42 6.61 16.91 20.93 2.20 7.40 17.70 21.71 

88 88 108 108B 36 168 429.5 531.5 108 56 188 449.5 551.5 

0.93 6.12 16.42 20.43 1.85 7.05 17.34 21.36 

LA132S 

108 108 128 128B 23.5 155.5 

0.51 5.71 

417 

16.00 

519 

20.02 

128 47 

1.69 

179 

6.89 

440.5 

17.19 

542.5 

21.20 

10.20 

259 

7.68 

195 

0.0 (1"+3/4") 

5.51 

140 

5.51 

140 

5.67 

144 

128 128 148 148B 13 145 406.5 508.5 148 43 175 436.5 538.5 

0.20 5.39 15.69 19.70 1.24 6.44 16.73 20.75 

148 148 168 168B 5 137 398.5 500.5 168 31.5 163.5 425 527 

-0.37 4.82 15.12 19.13 -0.37 4.82 15.12 19.13 

168 188 188B -9.5 122.5 384 486 188 -9.5 122.5 384 486 

-0.37 4.82 15.12 19.13 

208 -9.5 122.5 384 486 

0.02 7.74 19.84 23.86 

48 48 68 68 68B 0.5 196.5 504 606 

2.15 7.34 19.45 23.46 2.52 7.72 19.82 23.84 

68 68 88 88 88B 54.5 186.5 494 596 88 64 196 503.5 605.5 

1.42 6.61 18.72 22.74 2.20 7.40 19.51 23.52 

88 88 108 108B 36 168 475.5 577.5 108 56 188 495.5 597.5 

0.93 6.12 18.23 22.24 1.85 7.05 19.15 23.17 

LA132ZM 

108 108 128 128B 23.5 155.5 

0.51 5.71 

463 

17.81 

565 

21.83 

128 47 

1.69 

179 

6.89 

486.5 

19.00 

588.5 

23.01 

10.20 

259 

7.68 

195 

0.0 (1"+3/4") 

5.51 

140 

5.51 

140 

5.67 

144 

128 128 148 148B 13 145 452.5 554.5 148 43 175 482.5 584.5 

0.20 5.39 17.50 21.52 1.24 6.44 18.54 22.56 

148 148 168 168B 5 137 444.5 546.5 168 31.5 163.5 471 573 

-0.37 4.82 16.93 20.94 -0.37 4.82 16.93 20.94 

168 188 188B -9.5 122.5 430 532 188 -9.5 122.5 430 532 

-0.37 4.82 16.93 20.94 

208 -9.5 122.5 430 532 

mm 

9 - 44

Dimensions 





type D 

0.02 8.35 21.67 26.34 

68 68 88 88 88B 0.5 212 550.5 669 

1.00 7.70 21.02 25.69 

88 88 108 108B 25.5 195.5 534 652.5 

0.55 7.24 20.57 25.24 1.71 8.41 21.73 26.40 

108 108 128 128B 14 184 522.5 641 108 43.5 213.5 552 670.5 

LA160M 

128 128 148 148B 

-0.10 6.59 

-2.5 167.5 

19.92 

506 

24.59 

624.5 128 

1.36 

34.5 

8.05 

204.5 

21.38 

543 

26.04 

661.5 

12.30 

313.5 

8.94 

227 

0.0 (1"+3/4") 

6.50 

165 

6.50 

165 

7.68 

195 

-0.39 6.30 19.63 24.29 1.10 7.80 21.12 25.79 

148 148 168 168B -10 160 498.5 617 148 28 198 536.5 655 

-0.96 5.73 19.06 23.72 0.65 7.34 20.67 25.33 

168 188 188B -24.5 145.5 484 602.5 168 16.5 186.5 525 643.5 

-0.96 5.73 19.06 23.72 -0.96 5.73 19.06 23.72 

188 208 -24.5 145.5 484 602.5 188 -24.5 145.5 484 602.5 

0.02 8.35 23.56 28.23 

68 68 88 88 88B 0.5 212 598.5 717 

1.00 7.70 22.91 27.58 

88 88 108 108B 25.5 195.5 582 700.5 

0.55 7.24 22.46 27.13 1.71 8.41 23.62 28.29 

108 108 128 128B 14 184 570.5 689 108 43.5 213.5 600 718.5 

LA160ZL 

128 128 148 148B 

-0.10 6.59 

-2.5 167.5 

21.81 

554 

26.48 

672.5 128 

1.36 

34.5 

8.05 

204.5 

23.27 

591 

27.93 

709.5 

12.34 

313.5 

8.94 

227 

0.0 (1"+3/4") 

6.49 

165 

6.49 

165 

7.68 

195 

-0.39 6.30 21.52 26.18 1.10 7.80 23.01 27.68 

148 148 168 168B -10 160 546.5 665 148 28 198 584.5 703 

-0.96 5.73 20.94 25.61 0.65 7.34 22.56 27.22 

168 188 188B -24.5 145.5 532 650.5 168 16.5 186.5 573 691.5 

-0.96 5.73 20.94 25.61 -0.96 5.73 20.94 25.61 

188 208 -24.5 145.5 532 650.5 188 -24.5 145.5 532 650.5 

0.02 8.37 25.37 30.18 

88 88 108 108B 0.5 212.5 644.5 766.5 

1.22 7.80 24.80 29.61 

108 108 128 128B 31 198 630 752 

0.69 7.26 24.27 29.07 2.15 8.72 25.73 30.53 

LG180ZM 

128 128 148 148B 17.5 184.5 616.5 

0.39 6.97 23.98 

738.5 

28.78 

128 54.5 

1.89 

221.5 653.5 

8.46 25.47 

775.5 

30.28 

13.70 12.70 

0.0 (1 1/4"+3/4") 

348 322.5 

7.56 

192 

10.24 

260 

8.90 

226 

148 148 168 168B 10 177 609 731 148 48 215 647 769 

-0.18 6.40 23.41 28.21 1.44 8.01 25.02 29.82 

168 188 188B -4.5 162.5 594.5 716.5 168 36.5 203.5 635.5 757.5 

-0.18 6.40 23.41 28.21 -0.18 6.40 23.41 28.21 

188 208 -4.5 162.5 594.5 716.5 188 -4.5 162.5 594.5 716.5 

mm 


9 - 45 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Dimensions 






type D 

LG180ZL 0.02 8.37 25.37 30.18 

88 88 108 108B 0.5 212.5 644.5 766.5 

1.22 7.80 24.80 29.61 

108 108 128 128B 31 198 630 752 

0.69 7.26 24.27 29.07 2.15 8.72 25.73 30.53 

128 128 148 148B 17.5 184.5 616.5 

0.39 6.97 23.98 

738.5 

28.78 

128 54.5 

1.89 

221.5 653.5 

8.46 25.47 

775.5 

30.28 

13.70 12.70 

0.0 (1 1/4"+3/4") 

348 322.5 

7.56 

192 

10.24 

260 

8.90 

226 

148 148 168 168B 10 177 609 731 148 48 215 647 769 

-0.18 6.40 23.41 28.21 1.44 8.01 25.02 29.82 

168 188 188B -4.5 162.5 594.5 716.5 168 36.5 203.5 635.5 757.5 

-0.18 6.40 23.41 28.21 -0.18 6.40 23.41 28.21 

188 208 -4.5 162.5 594.5 716.5 188 -4.5 162.5 594.5 716.5 

1.22 8.98 25.00 29.96 

108 108 128 128B 31 228 635 761 

0.69 8.44 24.47 29.43 2.15 9.90 25.93 30.89 

128 128 148 148B 17.5 214.5 621.5 747.5 128 54.5 251.5 658.5 784.5 

LG200L 

148 148 168 168B 

0.39 

10 

8.15 

207 

24.17 

614 

29.13 

740 148 

1.89 

48 

9.65 

245 

25.67 

652 

30.63 

778 

15.16 11.85 

0.0 (1 1/4"+3/4") 

385 301 

7.56 

192 

10.23 10.08 

260 256 

-0.18 7.58 23.60 28.56 1.44 9.19 25.22 30.18 

168 188 188B -4.5 192.5 599.5 725.5 168 36.5 233.5 640.5 766.5 

-0.18 7.58 23.60 28.56 -0.18 7.58 23.60 28.56 

188 208 -4.5 192.5 599.5 725.5 188 -4.5 192.5 599.5 725.5 

K4- 

9.72 17.44 35.28 44.69 

LGI225Y 108 108 128 128B 247 443 896 1135 

1.77 9.84 27.26 36.67 

128 128 148 148B 45 250 692.5 931.5 

LG225S 

148 148 168 168B 

1.48 9.55 

37.5 242.5 

0.91 9.00 

26.97 

685 

26.40 

36.38 

924 

35.81 

148 

2.97 

75.5 

2.52 

11.04 28.46 

280.5 723 

10.59 28.01 

37.87 

962 

37.42 

17.40 12.80 

0.0 

442 325 

(2x1 1/2") 

7.56 

192 

10.24 10.94 

260 278 

168 188 188B 23 228.5 670.5 909.5 168 64 269 711.5 950.5 

0.91 9.00 26.40 35.81 0.91 8.98 26.40 35.81 

188 208 23 228.5 670.5 909.5 188 23 228 670.5 909.5 

K4- 

9.72 17.44 39.61 49.02 

LGI225YM 108 108 128 128B 247 443 1006 1245 

1.77 9.84 31.59 40.98 

128 128 148 148B 45 250 802.5 1041 

LG225YM 

148 148 168 168B 

1.48 9.55 

37.5 242.5 

0.91 9.00 

31.30 

795 

30.73 

40.71 

1034 

40.14 

148 

2.97 

75.5 

2.52 

11.04 32.80 

280.5 833 

10.59 32.34 

42.60 

1082 

41.75 

17.40 12.80 

0.0 

442 325 

(2x1 1/2") 

7.56 

192 

10.24 10.94 

260 278 

168 188 188B 23 228.5 780.5 1019.5 168 64 269 821.5 1060.5 

0.91 9.00 30.73 40.14 0.91 8.98 30.73 40.14 

188 208 23 228.5 780.5 1019.5 188 23 228 780.5 1019.5 

mm 

9 - 46

Dimensions 





type D 

K4-LGI 

9.72 17.44 37.64 47.05 

225ZM 108 108 128 128B 247 443 956 1195 

1.77 9.84 29.63 39.04 

128 128 148 148B 45 250 752.5 991.5 

LG225ZM 

148 148 168 168B 

1.48 9.55 

37.5 242.5 

0.91 9.00 

29.33 

745 

28.68 

38.74 

984 

38.17 

148 

2.97 

75.5 

2.52 

11.04 30.83 

280.5 783 

10.59 30.37 

40.94 

1040 

40.49 

17.04 12.80 

442 325 

0.0 (2x1 1/2") 

7.56 

192 

10.24 10.94 

260 278 

168 188 188B 23 228.5 728.5 969.5 168 64 269 771.5 1028.5 

0.91 9.00 28.68 38.17 0.91 8.98 28.68 38.17 

188 208 23 228.5 728.5 969.5 188 23 228 730.5 987.5 

K4- 

9.17 18.50 41.34 50.24 

LGI250ZM 128 128 148 148B 233 470 1050 1276 

1.50 10.94 33.41 42.30 

148 148 38 278 848.5 1074.5 

LG250ZM 

168 168 168B 

0.93 10.37 32.83 

23.5 263.5 834 

0.93 10.37 32.83 

41.79 

1061.5 

41.79 0.93 10.37 32.83 41.69 

19.49 15.43 

495 392 

0.0 (2x2 1/2") 

9.29 

236 

11.81 

300 

12.2 

310 

188 188 188B 23.5 263.5 834 1061.5 188 23.5 263.5 834 1059.5 

0.93 10.39 32.83 41.69 

208 23.5 264 834 1059 

9.37 19.29 45.98 54.92 

148 148 168 168B 238 490 1168 1395 

K4- 

LGI280ZM 168 188 188B 

8.82 18.74 45.43 

224 476 1154 

54.37 

1381 

21.9 

555 

17.0 

432 

0.0 (2x2 1/2") 

9.3 

236 

11.81 

300 

13.2 

336 

8.82 18.74 45.43 54.37 8.82 18.74 45.43 54.37 

188 208 224 476 1154 1381 188 224 476 1154 1381 

mm 


9 - 47 

www.dstech.ca 

(450) 655-7447 




Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 



Relevant 

figure 

9 - 48 

LB/LBL LB/LBL LB/LBL 

ØDA EA 

1 6 2 3 4 5 


ØAW 

l l l 

Handwheel at 2nd 


LB/LBL 

Canopy Encoder 

Encoder under 

cover 


Encoder under 

cover with canopy 

Motor DA EA l D l AW l l AC l AW l 

0.55 1.18 1.34 3.94 1.97 5.43 1.02 2.76 5.47 2.95 5.43 3.98 

LA71 14 30 34 100 50 138 26 70 139 75 138 101 

0.55 1.18 1.34 3.94 1.97 5.43 1.02 2.76 5.47 2.95 5.43 3.98 

LA71Z 14 30 34 100 50 138 26 70 139 75 138 101 

0.55 1.18 1.34 3.94 1.97 5.43 1.02 2.76 6.16 2.95 5.43 3.98 

LA80 14 30 34 100 50 138 26 70 156.5 75 138 101 

0.75 1.57 1.77 6.30 2.56 6.93 0.63 2.76 6.85 2.95 6.93 3.58 

LA90S 19 40 45 160 65 176 16 70 174 75 176 91 

0.75 1.57 1.77 6.30 2.56 6.93 0.63 2.76 6.85 2.95 6.93 3.58 

LA90L 19 40 45 160 65 176 16 70 174 75 176 91 

0.75 1.57 1.77 6.30 2.56 6.93 0.63 2.76 6.85 2.95 6.93 3.58 

LA90ZL 19 40 45 160 65 176 16 70 174 75 176 91 

0.75 1.57 1.77 6.30 2.56 7.64 0.63 2.76 6.85 2.95 6.93 3.58 

LA100L 19 40 45 160 65 194 16 70 174 75 176 91 

0.75 1.57 1.77 6.30 2.56 7.64 0.63 2.76 6.85 2.95 6.93 3.58 

LA100ZL 19 40 45 160 65 194 16 70 174 75 176 91 

0.94 1.97 2.20 7.87 3.03 8.58 0.63 2.76 7.68 2.95 7.64 3.58 

LA112M 24 50 56 200 77 218 16 70 195 75 194 91 

0.94 1.97 2.20 7.87 3.03 8.58 0.63 2.76 7.68 2.95 7.64 3.58 

LA112ZM 24 50 56 200 77 218 16 70 195 75 194 91 

1.10 2.36 2.68 7.87 3.50 10.12 0.71 2.76 7.68 2.95 7.64 3.58 

LA132S 28 60 68 200 89 257 18 70 195 75 194 91 

1.10 2.36 2.68 7.87 3.50 10.12 0.71 2.76 7.68 2.95 7.64 3.58 

LA132M 28 60 68 200 89 257 18 70 195 75 194 91 

1.10 2.36 2.68 7.87 3.50 10.12 0.71 2.76 7.68 2.95 7.64 3.58 

LA132ZM 28 60 68 200 89 257 18 70 195 75 194 91 

1.50 3.15 3.46 12.40 4.37 12.20 0.73 2.76 7.68 2.95 12.20 3.68 

LA160M 38 80 88 315 111 310 18.5 70 195 75 310 93.5 

1.50 3.15 3.46 12.40 4.37 12.20 0.73 2.76 7.68 2.95 12.20 3.68 

LA160L 38 80 88 315 111 310 18.5 70 195 75 310 93.5 

1.65 4.33 4.92 13.58 1.44 2.76 7.68 2.87 12.20 3.60 

LG180M 42 110 125 345 36.5 70 195 73 310 91.5 

1.65 4.33 4.92 13.58 1.44 2.76 7.68 2.87 12.20 3.60 

LG180ZM 42 110 125 345 36.5 70 195 73 310 91.5 

1.65 4.33 4.92 13.58 1.44 2.76 7.68 2.87 12.20 3.60 

LG180L 42 110 125 345 36.5 70 195 73 310 91.5 

1.65 4.33 4.92 13.58 1.44 2.76 7.68 2.87 12.20 3.60 

LG180ZL 42 110 125 345 36.5 70 195 73 310 91.5 

l 

ØAC 

ØAW 

l l 

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 

ØD 

mm


Relevant 

figure 

LB/LBL LB/LBL LB/LBL 

ØDA EA 


1 6 2 3 4 5 


ØAW 

l l l 

Handwheel at 2nd 


Canopy Encoder 

Encoder under 

cover 


Encoder under 

cover with canopy 

Motor DA EA l D l AW l l AC l AW l 

1.89 4.33 5.12 15.04 1.63 2.76 7.68 2.87 12.20 3.60 

LG200L 48 110 130 382 41.5 70 195 73 310 91.5 

1.89 4.33 5.12 15.04 1.63 2.76 7.68 2.87 12.20 3.60 

LG200ZL 48 110 130 382 41.5 70 195 73 310 91.5 

2.17 4.33 4.49 16.73 3.94 5.12 

LG225S 55 110 114 425 100 130 - - - - 

2.17 4.33 4.49 16.73 3.94 5.12 

LG225M 55 110 114 425 100 130 - - - - 

2.17 4.33 4.49 16.73 3.94 5.12 

LG225YM 55 110 114 425 100 130 - - - - 

2.17 4.33 4.49 16.73 3.94 5.12 

LG225ZM 55 110 114 425 100 130 - - - - 

2.36 5.51 5.71 18.50 3.94 5.12 

LG250M 60 140 145 470 100 130 - - - - 

2.36 5.51 5.71 18.50 3.94 5.12 

LG250ZM 60 140 145 470 100 130 - - - - 

2.56 5.51 5.71 20.67 4.33 5.12 

LG280S 65 140 145 525 110 130 - - - - 

2.56 5.51 5.71 20.67 4.33 5.12 

LG280M 65 140 145 525 110 130 - - - - 

2.56 5.51 5.71 20.67 4.33 5.12 

LG280ZM 65 140 145 525 110 130 - - - - 

LB/LBL 

l 

ØAC 

ØAW 

l l 

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 

ØD 

mm 

9 - 49 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Additional lengths for rugged encoders 

Relevant 

figure 

3 7 8 10 5 5 

Encoder Encoder under cover 

Encoder under cover 

with canopy 

Encoder with canopy 

Encoder+ 

external fan 

Brake + encoder + 

external fan 

Motor 

l LL, 

1XP HOG9 

HOG10 AC 

LL, 

l 

HOG9, 

1XP 

HOG10 

AW l 

1XP 

LL, 

HOG9, 

HOG10 

AW l 

LL, 

HOG9, 

1XP 

HOG10 

l 

1XP 

LL, 

HOG9, 

HOG10 

l 

1XP 

LL, 

HOG9 HOG10 

2.76 5.47 2.95 5.43 3.98 9.04 9.04 

LA71 70.0 - - 139.0 75 - 138 101.0 - - - - 229.5 - 229.5 - - 

2.76 5.47 2.95 5.43 3.98 8.29 8.29 

LA71Z 70.0 - - 139.0 75 - 138 101.0 - - - - 210.5 - 210.5 - - 

2.76 6.16 2.95 5.43 3.98 8.46 8.46 

LA80 70.0 - - 156.5 75 - 138 101.0 - - - - 215.0 - 215.0 - - 

2.76 6.85 2.95 6.93 3.58 8.86 8.86 

LA90S 70.0 - - 174.0 75 - 176 91.0 - - - - 225.0 - 225.0 - - 

2.76 6.85 2.95 6.93 3.58 8.86 8.86 

LA90ZL 70.0 - - 174.0 75 - 176 91.0 - - - - 225.0 - 225.0 - - 

2.76 6.85 2.95 6.93 3.58 9.17 9.17 

LA100ZL 70.0 - - 174.0 75 - 176 91.0 - - - - 233.0 - 233.0 - - 

2.76 7.68 2.95 7.64 3.58 8.82 8.82 

LA112ZM 70.0 93.5 - 195.0 75 - 194 91.0 - - - - 224.0 - 224.0 - - 

2.76 3.68 7.68 2.95 5.51 7.64 3.58 10.45 10.45 10.45 10.45 12.15 

LA132S 70.0 93.5 - 195.0 75 140 194 91.0 156.0 - - - 265.5 265.5 265.5 265.5 308.5 

2.76 3.68 7.68 2.95 5.51 7.64 3.58 6.14 10.45 10.45 10.45 10.45 12.15 

LA132ZM 70.0 93.5 - 195.0 75 140 194 91.0 156.0 - - - 265.5 265.5 265.5 265.5 308.5 

2.76 3.68 7.68 2.95 5.51 12.21 3.68 6.24 11.77 11.77 11.77 11.77 13.46 

LA160M 70.0 93.5 - 195.0 75 140 310 93.5 158.5 - - - 299.0 299.0 299.0 299.0 342.0 

2.76 3.68 7.68 2.95 5.51 12.21 3.68 6.24 11.77 11.77 11.77 11.77 13.46 

LA160L 70.0 93.5 - 195.0 75 140 310 93.5 158.5 - - - 299.0 299.0 299.0 299.0 342.0 

2.76 3.60 7.68 2.87 5.43 12.21 3.60 6.16 12.20 12.20 11.73 11.73 13.39 

LG180ZM 70.0 91.5 - 195.0 73 138 310 91.5 156.5 - - - 310.0 310.0 298.0 298.0 340.0 

2.76 3.60 7.68 2.87 5.43 12.21 3.60 6.16 12.20 12.20 11.73 11.73 13.39 

LG180ZL 70.0 91.5 - 195.0 73 138 310 91.5 156.5 - - - 310.0 310.0 298.0 298.0 340.0 

2.76 3.60 7.68 2.87 5.43 12.21 3.60 6.16 12.17 12.17 11.85 11.85 13.43 

LG200L 70.0 91.5 - 195.0 73 138 310 91.5 156.5 - - - 309.0 309.0 301.0 301.0 341.0 

3.41 5.91 5.91 16.73 3.94 6.30 16.73 16.73 22.68 22.68 22.68 

LG225S 86.5 150.0 150.0 - - - - - - 425 100 160 425.0 425.0 576.0 576.0 576.0 

3.41 5.91 5.91 16.73 3.94 6.30 16.73 16.73 22.68 22.68 22.68 

LG225YM 86.5 150.0 150.0 - - - - - - 425 100 160 425.0 425.0 576.0 576.0 576.0 

3.41 5.91 5.91 16.73 3.94 6.30 16.73 16.73 22.68 22.68 22.68 

LG225ZM 86.5 150.0 150.0 - - - - - - 425 100 160 425.0 425.0 576.0 576.0 576.0 

3.41 5.91 5.91 18.50 3.94 6.30 16.73 16.73 22.76 22.76 22.76 

LG250ZM 86.5 150.0 150.0 - - - - - - 470 100 160 425.0 425.0 578.0 578.0 578.0 

3.41 16.73 16.73 21.65 21.65 21.65 

LG280ZM 86.5 on request - - - - - - on request 425.0 425.0 550.0 550.0 550.0 

9 - 50 

LB/LBL LB/LBL 

LB/LBL 

LB/LBL LB/LBL 

ØAC 

l l 

l 

l l 

Figure 3 Figure 4 Figure 5 Figure 7 Figure 9 

ØAW 


mm

Additional lengths for forced ventilation, encoder and canopy 

LB/LBL 

LB/LBL 

l l 

Figure 8 Figure 9 

Figure 10 



Relevant 

figure 8 9 9 9 10 

External Fan Brake + external fan Encoder + external fan 

Brake + encoder + external 

fan 

Canopy for external fan 

Motor l l l l l 

4.35 5.30 9.04 9.04 1.46 

LA71 110.5 134.5 229.5 229.5 37 

3.60 4.55 8.29 8.29 1.46 

LA71Z 91.5 115.5 210.5 210.5 37 

3.58 4.72 8.46 8.46 1.57 

LA80 91 120 215 215 40 

3.74 5.12 8.86 8.86 1.18 

LA90S 95 130 225 225 30 

3.74 5.12 8.86 8.86 1.18 

LA90ZL 95 130 225 225 30 

3.90 5.43 9.17 9.17 1.10 

LA100ZL 99 138 233 233 28 

3.58 5.08 8.82 8.82 1.30 

LA112ZM 91 129 224 224 33 

4.82 6.79 10.45 10.45 0.98 

LA132S 122.5 172.5 265.5 265.5 25 

4.82 6.79 10.45 10.45 0.98 

LA132ZM 122.5 172.5 265.5 265.5 25 

5.63 8.07 11.77 11.77 1.26 

LA160M 143 205 299 299 32 

5.63 8.07 11.77 11.77 1.26 

LA160L 143 205 299 299 32 

6.22 8.66 12.20 12.20 1.26 

LG180ZM 158 220 310 310 32 

6.22 8.66 12.20 12.20 1.26 

LG180ZL 158 220 310 310 32 

6.06 9.02 12.17 12.17 1.26 

LG200L 154 229 309 309 32 

9.25 22.68 16.73 22.68 10.04 

LG225S 235 576 425 576 255 

9.25 22.68 16.73 22.68 10.04 

LG225YM 235 576 425 576 255 

9.25 22.68 16.73 22.68 10.04 

LG225ZM 235 576 425 576 255 

9.25 22.76 16.73 22.76 10.04 

LG250ZM 235 578 425 578 255 

9.25 21.65 16.73 21.65 10.04 

LG280ZM 235 550 425 550 255 

l 

mm 

9 - 51 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


Encoder mounting prepared 

Relevant 

figure 

9 - 52 

l 

EA 

ØDA 

ØDG 

Figure 1 Figure 2 

1 2 3 

Encoder 

prepared 

Encoder 

prepared 

under cover 

l 

EA 

Encoder prepared + external fan + with / without brake 


Motor DA EA DG l l X l l1 l2 l3 Brake l3B l4 M1 M2 

0.47 1.18 2.76 2.95 9.04 5.30 3.74 2.32 2.32 1.46 

LA71 12 30 max. 70 75 min. 229.5 134.5 95 59 L4, L8 59 37 M5x120 2xM4 

2.36 0.39 8.29 4.55 3.74 2.32 2.32 

LA71Z 60 10 210.5 115.5 95 59 L4, L8 59 M5x120 

8.46 4.77 3.74 2.20 2.60 

LA80 215 121.2 95 56 L4, L8 66 M6x130 

2.20 

L16 56 

8.86 4.72 4.13 3.03 3.03 

LA90S 225 120 105 77 L8, L16 77 

2.60 

L32 66 

8.86 4.72 4.13 3.03 3.03 

LA90ZL 225 120 105 77 L8, L16 77 

2.60 

L32 66 

9.17 5.04 4.13 3.39 3.39 

LA100ZL 233 128 105 86 L16,L32 86 

2.85 

L60 72.5 

8.82 4.55 4.13 3.84 3.84 

LA112ZM 224 115.5 105 97.5 L32, L60 97.5 M8x160 

10.45 5.45 5.00 3.35 4.61 

LA132S 265.5 138.5 127 85 L80 117 

3.86 

L150 98 

10.45 5.45 5.00 3.35 4.61 

LA132ZM 265.5 138.5 127 85 L80 117 

3.86 

L150 98 

11.77 5.79 5.98 4.53 5.51 

LA160M 299 147 152 115 L150, L260 140 M10x210 

11.77 5.79 5.98 4.53 5.51 

LA160L 299 147 152 115 L150, L260 140 

2.87 12.20 5.83 5.98 4.53 6.18 

LG180ZM 73 310 148 152 115 L260 157 

12.20 5.83 5.98 4.53 6.18 

LG180ZL 310 148 152 115 L260 157 

1.16 12.17 5.94 5.98 4.53 6.89 

LG200L 29.4 309 151 152 115 L260, L400 175 

ØDA 

ØDG 

X 

ØDG 

EA 

Figure 3 

LB/LBL 

M2 

ØDA 

M1 

l4 

l1 l2 

l 

l3/l3B 

mm

Electric Motors AM, M 

Data 


IEC =IEC frame size DL =Design Letter 


P N =Rated power I A / I N =relative starting current with direct line on starting 

n N =Rated speed T A / T N =relative starting torque with direct line on starting 

I N =Rated current T K / T N =relative breakdown torque with direct line on starting 

cos ϕ =Power factor T Hm / T N =relative average run-up torque 

η =Efficiency 

(1/1) at full load 

(3/4) at 3/4 -load 

J mot 

EEV =Energy Efficiency Verification m mot =Weight 

=Moment of inertia 

9 - 53 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 


332/575 V ∆/Y 60 Hz or 575 V Y 60 Hz 

9 - 54 

For frame size 18 and 28 : 

IEC Type P N n N T N I N I N I N cos ϕ η I A/I N T A/T N T K/T N T Hm/T N J mot m mot 

(230 V) (460 V) (575 V) (4/4) 

[HP] [kW] [rpm] [lb.in] [Nm] [A] [A] [A] [-] [%] [-] [-] [-] [-] [lb-ft 2 ] [kgm 2 ] [lb] [kg] 

LA71B4 0.12 0.16 1690 6.02 0.68 0.80 0.40 0.32 0.61 62.2 4.1 2.6 2.8 2.5 0.01234 0.00052 12.13 5.5 

LA71C4 0.25 1.18 1675 9.12 1.03 1.14 0.57 0.46 0.63 62.8 3.8 2.4 2.4 2.3 0.01234 0.00052 12.13 5.5 

71 

LA71S4 

LA71M4 

0.33 

0.50 

0.25 

0.37 

1665 12.7 1.43 

1680 18.6 2.10 

1.42 

1.96 

0.71 

0.98 

0.57 

0.78 

0.71 

0.71 

62.0 

66.4 

3.8 

4.2 

2.5 

2.4 

2.4 

2.7 

2.4 

2.4 

0.01234 0.00052 12.13 

0.01827 0.00077 15.21 

5.5 

6.9 

LA71ZMP4 0.75 0.55 1680 27.7 3.13 2.82 1.41 1.13 0.68 72.2 4.6 2.9 2.9 2.6 0.02610 0.00110 17.85 8.1 

LA71ZMD4 1.00 0.75 1635 38.8 4.38 3.84 1.92 1.54 0.68 71.7 4.4 4.4 2.8 2.6 0.02848 0.00120 18.95 8.6 

LA90SB4E 1.50 1.10 1755 53.0 5.99 4.30 2.15 0.72 0.76 85.5 7.7 3.1 3.9 2.7 0.05695 0.00240 33.07 15.0 

90 LA90ZLB4E 2.00 1.50 1775 71.4 8.07 5.90 2.95 2.36 0.76 86.5 8.1 3.6 4.2 2.9 0.09492 0.00400 45.64 20.7 

LA90ZLB4 3.00 2.20 1680 111 12.5 8.70 4.35 3.48 0.80 79.0 6.3 3.1 3.3 2.6 0.09492 0.00400 45.64 20.7 

100 LA100ZLD4E 4.00 3.00 1750 145 16.4 11.00 5.50 4.40 0.79 88.5 8.4 3.8 4.6 3.4 0.18272 0.00770 76.06 34.5 

From frame size 38 : 

IEC Type P N n N T N I N I N I N cos ϕ η I A/I N T A/T N T K/T N T Hm/T N J mot m mot 

(230 V) (460 V) (575 V) (4/4) 

[HP] [kW] [rpm] [lb.in] [Nm] [A] [A] [A] [-] [%] [-] [-] [-] [-] [lb-ft 2 ] [kgm 2 ] [lb] [kg] 

LA71B4 0.12 0.16 1690 6.02 0.68 0.80 0.40 0.32 0.61 62.2 4.1 2.6 2.8 2.5 0.01234 0.00052 12.13 5.5 

71 

LA71C4 

LA71S4 

0.25 

0.33 

0.18 1675 

0.25 1665 

9.12 

12.7 

1.03 

1.43 

1.14 

1.42 

0.57 

0.71 

0.46 

0.57 

0.63 

0.71 

62.8 

62.0 

3.8 

3.8 

2.4 

2.5 

2.4 

2.4 

2.3 

2.4 

0.01234 0.00052 12.13 5.5 

0.01234 0.00052 12.13 5.5 

LA71M4 0.50 0.37 1680 18.6 2.10 1.96 0.98 0.78 0.71 66.4 4.2 2.4 2.7 2.4 0.01827 0.00077 15.21 6.9 

80 

LAI80S4 

LA80M4 

0.75 

1.00 

0.55 1710 

0.75 1710 

27.2 

37.1 

3.07 

4.19 

2.64 

3.42 

1.32 

1.71 

1.06 

1.37 

0.76 

0.68 

69.2 

71.7 

5.0 

4.4 

2.9 

4.4 

2.9 

2.8 

2.5 

2.6 

0.03322 0.00140 22.93 10.4 

0.02848 0.00120 18.96 8.6 

90 

LA90SB4E 

LA90ZLB4E 

1.50 

2.00 

1.10 1755 

1.50 1775 

53.0 

71.4 

5.99 

8.07 

4.30 

5.90 

2.15 

2.95 

1.72 

2.36 

0.76 

0.76 

85.5 

86.5 

7.7 

8.1 

3.1 

3.6 

3.9 

4.2 

2.7 

2.9 

0.05695 0.00240 33.07 15.0 

0.09492 0.00400 45.64 20.7 

100 

LA100ZLP4E 

LA100ZLD4E 

3.00 

4.00 

2.20 1750 

3.00 1750 

106 

145 

12.0 

16.4 

8.00 

11.00 

4.00 

5.50 

3.20 

4.40 

0.79 

0.79 

87.5 

88.5 

8.4 

8.4 

3.4 

3.8 

4.3 

4.6 

3.1 

3.4 

0.14713 0.00620 63.49 28.8 

0.18272 0.00770 76.06 34.5 

112 LA112ZMP4E 5.50 4.00 1755 193 21.8 14.60 7.30 5.84 0.79 88.5 8.6 3.2 3.9 2.5 0.33223 0.01400 93.70 42.5 

LA132SP4E 7.50 5.50 1760 264 29.8 19.00 9.50 7.60 0.80 90.5 8.7 3.2 4.1 2.7 0.54580 0.02300 114.2 51.8 

132 LA132ZMP4E 10.00 7.50 1760 360 40.7 25.60 12.80 10.24 0.81 90.5 8.7 3.4 4.1 2.7 0.68818 0.02900 152.1 69.0 

LA132ZMP4 12.30 9.20 1745 445 50.3 30.40 15.20 12.16 0.86 88.5 8.5 2.6 3.3 2.6 0.68818 0.02900 152.1 69.0 

160 

LA160MP4E 

LA160ZLP4E 

15.00 11.00 1765 

20.00 15.00 1765 

527 

719 

59.5 

81.2 

35.80 

49.00 

17.90 

24.50 

14.32 

19.60 

0.85 

0.85 

91.0 

91.5 

8.1 

8.5 

2.6 

2.8 

3.2 

3.5 

2.2 

2.2 

1.30517 0.05500 205.5 93.2 

1.70859 0.07200 271.2 123 

180 

LGI80ZMB4E 

LGI80ZLB4E 

25.00 18.50 1770 883 99.8 61.00 

30.00 22.00 1770 1051 118.7 72.00 

30.50 

36.00 

24.40 

28.80 

0.83 

0.83 

92.4 

92.4 

8.4 

8.8 

2.8 

3.1 

3.6 

3.9 

- 

2.84764 0.12000 396.8 180 

3.32225 0.14000 463 210 

200 LG200LB4E 40.00 30.00 1770 1433 161.9 96.00 48 38.40 0.84 93.0 8.3 3.0 3.6 - 5.45798 0.23000 573 260 

LG225S4E 50 37 1785 1752 197.9 120.00 60 48.00 0.84 93.6 7.5 3.1 3.4 9.49214 0.40000 736 334 

225 LG225ZM4E 60 45 1785 2130 240.7 142.00 71 56.80 0.85 94.1 7.9 3.3 3.5 - 11.62788 0.49000 838 380 

LG225YMB4E 75 55 1785 2602 294.0 170.00 85 68.00 0.85 94.1 7.8 3.0 3.3 15.66204 0.66000 899 408 

250 LG250ZMB4E 100 75 1788 3549 401.0 232.00 116 92.80 0.86 94.5 8.1 3.0 3.3 - 23.49306 0.99000 1257 570 

280 

LGI280ZM4E 120 

LGI280ZMB4E 150 

90 

110 

1790 4248 480.0 278.00 

1788 5195 587.0 338.00 

139 

169 

111.20 0.86 

135.20 0.86 

94.5 

95.0 

8.2 

8.4 

3.0 

3.1 

3.4 

3.5 

- 

40.34161 1.70000 1808 675 

44.61308 1.88000 820


9 - 55 

(450) 655-7447 


www.dstech.ca 



Canada, J4B 5H2




(450) 655-7447 


www.dstech.ca 

Siemens Canada Ltd 

1550 Appleby Line 

Burlington, ON, L7L 6X7 

CANADA 

Toll Free: 1.800.263.7444 

Phone: (905) 305-1021 

www.siemens.ca 

Subject to Change without prior notice 

Order No.: 1.0_03/11_A&D-1403 

Printed in Canada 

© Siemens Canada Ltd. 2011 

The information provided in this printed material contains merely 

general description or characteristics of performance which in case of 

actual use do not always apply as described or which may change as a 

result of further development of the product. An obligation to provide 

the respective characteristics shall only exist if expressly agreed in the 

terms of contract. 

All product designations may be trademarks or product names of 

Siemens AG or supplier companies whose use by third parties for their 

own pusposes could violate the rights of the owners.

DS TECH US_CAD Motox Catalogue 2011_1

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?