PRODUCT GUIDE

PRODUCT GUIDE 

INSTALLATION SYSTEMS FOR FLOOR COVERINGS 

Rod Edquist with Colorado Floorworks used UZIN products 

for this fast track project at University of Colorado Hospital 

UZIN. YOUR FLOOR. OUR PROMISE.

2 

Cheryl Acierno, owner of Acierno & Company, Denver, CO 

needed both a moisture solution and a fast turnaround for 

Hodson’s Bar & Grill. UZIN products delivered.

UZIn. YOUR FLOOR. OUR PROMIsE. 

You place your signature on your fl oors every day. 

And it takes a high degree of effort and creativity to 

fulfi ll the vision you’ve laid out for your customers. It 

requires attention to detail and an uncompromising 

requirement for solutions to issues that your jobsites 

demand of you every day. We understand that. And 

we promise that we will be there with you, offering you 

the highest level of technical support and expertise 

along with the highest quality, innovative product 

solutions that are effective, safe for the environment 

and for you but that also recognize the need to 

reduce project costs that improve profi tability for your 

company. And we back that up with one of the most 

comprehensive product system warranties available in 

our industry. 

With Uzin, you can count on our Promise. 

Matthias Liebert 

President, UFLOOR Systems Inc. 

3 


COnTEnTs 

Primers / Moisture Vapor Retarders 5 

Moisture Vapor Mitigation System 6 

Primers / Moisture Vapor Retarders 7 

Primer / MVR Accessory Products 10 

Leveling Compounds 11 

Leveling Compounds / Cement-based 12 

Leveling Compounds / Gypsum-based 14 

Patch / Repair / Smoothing Compounds 15 

Leveling Accessory Products 16 

Adhesives 17 

Floor Covering Adhesives 18 

Wood Flooring Adhesives 19 

Adhesive Accessory Products 21 

Tools & Accessories 22 

Primer / MVR Application Tools 23 

Leveling Compound Mixing Tools 24 

Leveling Compound Application Tools 26 

Adhesive Application Tools 27 

Our Responsibility to the Environment 28 

Contact Information 30 

Alphabetical Listing 

Threaded Insert for Tools 26 

Trowel Handles 27 

Trowel Inserts 27 

US Trowel 27 

UZIN Clean Box 21 

UZIN Drum Kit 24 

UZIN Epoxy Accelerator 10 

UZIN Epoxy Colorant 10 

UZIN Extension Pole 23 

UZIN Flat Cage Mixing Paddle 25 

UZIN Foam Expansion Strips 16 

UZIN Foam Roller 10” 23 

UZIN Foam Roller Coarse 27 

UZIN Gauge Rake 26 

UZIN Leveling Compound Rake 26 

UZIN Leveling Pins 16 

UZIN Mixing Bucket 24 

UZIN Mixing Drum 24 

UZIN MK 92 S 20 

UZIN MK 95 20 

UZIN MK 200 19 

UZIN NC 110 14 



UZIN NC 170 LevelStar 12 

UZIN NC 172 BiTurbo 12 



UZIN Nylon Fiber Roller 10” 23 

UZIN Oval Mixing Paddle 25 

UZIN PE 260 9 

UZIN PE 280 8 

UZIN PE 414 Turbo 8 

UZIN PE 460 7 

UZIN Roller Frame 10” 23 

UZIN RR 201 16 

UZIN RR 203 16 

UZIN Smoother 26 

UZIN Spike Roller 26 

UZIN Spiral Mixer 25 

UZIN Water Bucket 24 

UZIN WK 222 18 

4

Primers / Moisture Vapor Retarders 

5

Moisture Mitigation system 

OnE BILLIOn DOLLARs 

That‘s the estimated cost that the fl ooring 

industry pays every year for moisture and pH 

related fl ooring failures. At Uzin, we would like 

to be a partner with you in helping to reduce that 

dollar amount. Our Moisture Mitigation System 

offers you not only peace of mind, 

but also a lifetime warranty against 

moisture vapor related failures 

when properly installed.* Look for 

this UZIN Moisture Mitigation 

System icon next to these 

innovative products: 

• UZIN PE 460 Moisture Vapor Retarder 

• UZIN PE 280 Super-Fast Primer 

• UZIN NC 170 Leveling Compound 

You can fi nd the UZIN Moisture 

Mitigation System Specifi cation 

on our website or you can scan 

this QR Code for instant access. 

www.uzin.us 


Moist 

s 

ure 

r 

Mitigat 

t 

a 

sy 

ti 

yst 

ys 

s 

on 

em 

Project: University of Colorado Hospital Expansion 

*Subject to certain requirements. 

6

PRIMERs / MOIsTURE VAPOR RETARDERs 

UZIn PE 460 

Moisture Vapor Retarder / Primer 

no Limit 

on Moisture 

2-component epoxy resin moisture vapor retarder and surface hardening primer for 

concrete substrates with high residual moisture. 

Suitable for/on/as: 

• Fast track installations with the addition of UZIN Epoxy Accelerator* (approx. 3½ hour dry time) 

• A vapor retarder/primer for high residual moisture on scarifi ed, very dense or smooth concrete 

• A surface hardening primer on absorbent substrates, such as gypsum products and concrete 

• A bonding agent on abraded ceramic tile, stone and terrazzo surfaces, existing substrates with wellbonded 

adhesive residues, smoothing compounds and coatings including water-soluble adhesive residues 

• Radiant fl oor heating systems (obtain technical advice) 

Properties: 

• Rapid drying 

• Excellent fi lling capacity 

• Chemical resistant 

• Water and solvent free - meets strict EMICODE EC 1 R PLUS criteria (healthy indoor air quality) 

® 

LEED 

contributing 

product 


tem 

te 

Note: See product data sheet for PE 460 for additional product information and detailed application instructions. 

re 

r 

on 

Mitigati 

t 

yst 

ys 

s 

sy 

Item # Package Size Color Coverage VOC Dry Time 

73030 2.5 gal. metal Brown 

Does not exceed 

combi-can 

10 grams/liter 

270 sq. ft./pail (1 coat ap.) 

270 sq. ft./pail (2 coat ap. - 1st coat) 

540 sq. ft./pail (2 coat ap. - 2nd coat) 

Foot traffi c: 5-21 hrs. 

Ready for covering: 5-21 hrs. 

*Fast track: approx. 3½ hrs. 

University of Colorado Hospital Expansion 

Anschutz Medical Campus, Aurora, Colorado 

Products: UZIN PE 480, UZIN PE 280, UZIN NC 170 

Contractor: Colorado Floorworks 

7 

UZIN. 

UZIN. 

YOUR 

YOUR 

FLOOR. 

FLOOR. 

OUR 

OUR 

PROMISE. 

PROMISE.


UZIn PE 414 Turbo 

Primer / Moisture Vapor Retarder 

surface 

strengthening 

1-component surface strengthening primer and moisture vapor retarder. Fast drying polyurethane 

primer for use prior to the application of UZIN leveling compounds. Acts as a surface strengthener 

and primer coat on absorbent and non-absorbent surfaces. 


• A substrate surface strengthener prior to the application of UZIN cement-based patching 

and leveling products 

• Priming over gypcrete, concrete, plywood, OSB, well-bonded adhesive residues 

including water-soluble adhesives, and non-porous surfaces 

• A moisture vapor retarder on existing concrete up to 90% RH and 7 lb. MVER 

• Diffi cult substrates to improve the bond of UZIN wood fl ooring adhesives such as 

UZIN MK 92 S, UZIN MK 95 and UZIN MK 200 

• Radiant fl oor heating systems (priming only, not for moisture mitigation) 

Properties: 

• Fast drying - quicker installations 

• Ready to use - no mixing required 

• Low viscosity - excellent surface penetration 

• Water and solvent free - meets strict EMICODE EC 1 R PLUS criteria (healthy indoor air quality) 

® 

LEED 

contributing 

product 



41364 2.6 gallon 

plastic pail 

Brown 1,200-1,500 sq. ft./pail Does not exceed 


Absorbent: 40-90 min. 

Dense: 60-150 min. 

UZIn PE 280 

super-Fast Primer 

Very 

Fast Drying 

1-component dispersion primer with carbon fiber technology for smooth and dense surfaces. 

Produces a rough, well-keyed surface and provides ideal adhesion over various substrates. 

Suitable for/on: 

• Existing surfaces in need of refurbishment, such as well-bonded, non-water-soluble adhesive 

residues including cutback adhesive and as a primer prior to application of UZIN leveling compounds 

• Dense and smooth surfaces, on soundly bonded ceramic and natural stone tiles, 

terrazzo, water-resistant coatings, epoxy coatings or metal surfaces 

• UZIN epoxy and polyurethane primers 

• Radiant fl oor heating systems 

Properties: 

• Very fast drying - quicker installations 

• Ready to use - no mixing required 

• Superior bonding - use over UZIN epoxy or polyurethane primers 

• Solvent free - meets strict EMICODE EC 1 PLUS criteria (healthy indoor air quality) 

® 

LEED 

contributing 

product 


tem 

te 


re 

r 

on 

Mitigati 

t 

yst 

ys 

s 

sy 


47522 

1.1 gal. plastic pail Yellowish 

510-780 sq. ft./1.1 gal. Does not exceed Approx. 45 min. 

47523 

2.6 gal. plastic pail 

1,200-1,850 sq. ft./2.6 gal 10 grams/liter 

8


UZIn PE 260 

substrate Primer 

super 

Bonding 

Agent 

1-component dispersion primer for use over absorbent and non-absorbent surfaces prior 

to the application of UZIN leveling compounds. 


• Existing surfaces requiring refurbishment, such as well-bonded, non-water-soluble adhesive 

residues and leveling compounds 

• Soundly attached plywood, OSB or other suitable wood substrates 

• Thin well-bonded cutback adhesive residues 


Properties: 

• Ready to use - can be applied undiluted or diluted depending on surface absorbency 

• Highly concentrated 

• High solids content - superior bonding on most substrates, won’t re-emulsify when leveling compound is applied. 


® 

LEED 

contributing 

product 



6367 2.6 gallon 

Light blue 800-1,200 sq. ft./pail Does not exceed Approx. 1-4 hrs. 

plastic pail 


Mid-Atlantic Floors in Sterling, VA incorporated six different UZIN 

system products in Gensler Architects’ new Washington, D.C. 

offi ces, including UZIN NC 170 Self Leveling Compound. 

9 


PRIMER / MVR ACCEssORY PRODUCTs 

UZIn Epoxy Colorant 

Red, liquid color concentrate for adding color to any UZIN 2-component epoxy resin MVR. 

Adds color contrast to visually insure 2nd coat coverage. 

Suitable with: 

Properties: 

• UZIN 2-component epoxy resin MVR’s 

• High color intensity 

Note: See product data sheet for Epoxy Colorant for additional product information and detailed application instructions. 

Item # Package Size Mixing Ratio Color 

9344 1 liter plastic bottle 3 ozs./2.5 gal. of MVR Red 

UZIn Epoxy Accelerator 

Epoxy accelerator for rapid curing for any UZIN 2-component epoxy resin MVR. 

Allows for fast track floor covering installation. 

Suitable with: 

Properties: 

• UZIN 2-component epoxy resin MVR’s 

• Accelerates the setting time 

Note: See product data sheet for Epoxy Accelerator for additional product information and detailed application instructions. 

Item # Package Size Mixing Ratio Color 

33155 4 - 7oz. (.2 kg) 

2 btls./2.5 gal. of MVR Brownish /transparent 

plastic btls./unit 

TIPs 

of the 

TRADE 

UZIn substrate Preparation Guide 

Substrate preparation is a vital part of the success of 

any fl oorcovering installation. Regardless of the substrate 

composition, it’s the foundation which serves as the 

platform for the installation of any floorcovering. The UZIN 

Substrate Preparation Guide is intended to communicate 

jobsite qualifi cation requirements, common industry 

surface preparation methods and equipment, and 

methods to avoid in order to produce the best possible 

substrate ready for the application of Uzin products. It 

also communicates appropriate Uzin product options 

and systems to meet floorcovering 

manufacturer specifications. You can 

find the Substrate Preparation Guide 

on our website at www.uzin.us or scan 

this QR Code for instant access to the 

guide. 

10

Leveling Compounds 

11

LEVELInG COMPOUnDs / CEMEnT-BAsED 

UZIn nC 172 BiTurbo 

Premium Plus self Leveling Compound 

Fastest 

Drying 

Leveling 

Compound 

Exceptionally fast drying, cement-based leveling and smoothing compound. Provides an extremely 

hard finish without depth limitations. Level Plus Effect technology produces flat, absorbent substrates 

for carpet and resilient floor coverings of all types. May also be used as a concrete topping with a 

minimum 1/4” even in industrial applications subject to rolling loads. 


• All types of floor covering 

• Wood flooring using any UZIN wood floor adhesive, cork and polyolefins (12 hour dry time) 

• Residential, commercial and heavy duty industrial applications 

• Existing substrates, including thin and dense non-water-soluble adhesive residues 

on concrete including cutback adhesive residues (subject to primer application) 

• Fast track construction projects 


Properties: 

• Ready for covering in as little as 1 hour 

• Very smooth surface - increased adhesive coverage rate 

• Exceptional fl ow properties 

• Pumpable 

• Meets strict EMICODE EC 1 R PLUS criteria (healthy indoor air quality) 

Note: See product data sheet for NC 172 for additional product information and detailed application instructions. 

® 

LEED 

contributing 

product 

Item # Package Size Comp. Strength Coverage Dry Time 

55837 55 lb. paper bag 7500 psi 

(@ 28 days) 

32 sq. ft./55 lb. bag 

@ 1/4“ depth 

Approx. 1 hr./Foot traffic 

Approx. 1 hr./Ready for covering 

UZIn nC 170 Levelstar 

Premium self Leveling Compound 

no Depth 

Limitation 

Premium low-stress, cement-based leveling and smoothing compound. Provides an extremely 

hard, smooth finish without depth limitations. Level Plus Effect technology produces flat, 

absorbent substrates for carpet and resilient floor coverings of all types. May be used as a 

topping provided a suitable wear surface sealer or coating is applied. 


• All types of fl oor coverings 

• A smoothing layer over structurally sound concrete above, on or below grade, in new construction 

or renovation projects. May be used over cast in place or precast concrete 

• A smoothing layer over existing hard surface fl ooring (stone, ceramics, and epoxy coatings) 

• New, structurally sound OSB or equally rated subfl oor materials with UZIN RR201 mesh 

• Existing substrates, including thin and dense non-water-soluble adhesive residues on concrete including 

cutback adhesive residues (subject to primer application) 

• High stress loads in residential, commercial and industrial locations 

• Radiant fl oor heating systems (hydronic or electric) 

Properties: 

• No depth limitation - versatile 

• Fast setting - accelerates fl oor covering installation 

• Shear resistant under wood fl ooring - suitable for all glue down wood applications 



Moisture 

Mitigation system 

r 

® 

LEED 

contributing 

product 

on 

Mitigati 

t 

yst 

ys 

s 

sy 

tem 

te 



(@ 28 days) 


@ 1/4” depth 

Approx. 2 hrs./Foot traffi c 

Approx. 15 hrs./Ready for covering 

12

LEVELInG COMPOUnDs / CEMEnT-BAsED 

UZIn nC 150 

Project Plus self Leveling Compound 

Ideal for 

Most Floor 

Coverings 

Cement-based leveling and smoothing compound for depths up to 1”. Works well for producing level, 

flat surfaces with high absorbency for standard preparation and cost effective applications in areas with 

normal wear demands. 


• Producing level, fl at, smooth substrates with high absorbency, for the application of carpet and 

all types of resilient fl oor covering 

• Producing fl at surfaces for installing ceramic tile and natural stone 

• Existing substrates with well-bonded, non-water-soluble residues of adhesives including cutback adhesive 

and leveling compounds (subject to primer application) 

• Effi cient and economical standard leveling work for residential and commercial projects with normal wear requirements 


Properties: 

• For depths up to 1” 

• Quick drying 

• Low stress - ability to cover diffi cult substrates 

• High compressive and tensile strength 


® 

LEED 

contributing 

product 




(@ 28 days) 


@ 1/4“ depth 

Approx. 2-3 hrs./Foot traffi c 


UZIn nC 157 

Project self Leveling Compound 

Economical 

surface 

Preparation 

Self-drying leveling compound for economical surface preparation for depths up to 2”. 


• Producing level, absorbent, fl at and smooth surfaces, on or below grade, prior to the installation of 

most fl oor coverings 

• A self-leveling layer over existing hard surface fl ooring such as well-bonded terrazzo, ceramic tile, 

stone and well-bonded epoxy coatings 

• Existing substrates, including thin and dense non-water-soluble adhesive residues on concrete, 

including cutback adhesive residues (subject to primer application) 

• Effi cient and economical standard leveling work for residential and commercial projects with 

normal wear requirements 

• Preventing the growth of mold or mildew 

Properties: 

• For depths up to 2” 

• Smooth surface 

• Good strength - high absorbency 


® 

LEED 

contributing 

product 




(@ 28 days) 


@ 1/4“ depth 

Approx. 2-4 hrs./Foot traffi c 

Approx. 24-36 hrs./Ready for covering 

13

LEVELInG COMPOUnDs / GYPsUM-BAsED 

UZIn nC 110 

Premium self Leveling Compound 

Great for 

Difficult 

substrates 

Gypsum-based leveling and smoothing compound. Provides an extremely smooth finish without 

depth limitation. Level Plus Effect technology produces flat, absorbent substrates for all types of 

floor covering. Particularly suitable for the renovation of old and multiple substrates. 


• All types of fl oor covering 

• Installation of engineered wood fl ooring with UZIN wood fl oor adhesives 

• Gypcrete, plywood and OSB substrates 

• Old gypcrete or concrete subfl oors with existing ceramic tile, stone and terrazzo 

• Existing plywood, OSB and concrete substrates with well-bonded, non-water-soluble 

and cutback adhesive residues and leveling compound residues (subject to primer application) 

• Residential and commercial use 


Properties: 

• Virtually stress-free drying and curing properties - great for diffi cult substrates 

• Fast setting - improves job productivity 

• Pumpable - minimizes time and effort 

• Very smooth surface - increased adhesive coverage rate 

• Meets strict EMICODE EC 1 PLUS criteria (healthy indoor air quality) 


Level Plus 

Effect 

® 

LEED 

contributing 

product 



(@ 28 days) 


@ 1/4“ depth 

Approx. 2 hrs./Foot traffi c 


Nick Lauranzon, Installation Manager with Hodgman’s Inc. 

in Richmond, VA just needed smoothing and patching with 

UZIN NC 888 for this project at St. Mary’s Hospital in Richmond 

14 


PATCH / REPAIR / sMOOTHInG COMPOUnDs 

UZIn nC 182 

Low slump Patching and Repair Compound 

Deep Fill, 

Ramp & 

skim 

Fast setting, low slump patching and repair compound for any depth. A cement-based material 

suitable for filling holes, cracks and making general surface repairs to concrete substrates. 


• Producing level, absorbent, fl at and smooth surfaces for virtually all fl oor coverings 

• A smoothing layer over structurally sound solid concrete on new construction or renovation projects 

• A smoothing layer over existing hard surface fl ooring (stone, ceramics and epoxy coatings) 

• New, sound OSB underlayment or equally rated subfl oor materials 

• Existing concrete substrates with thin and dense non-water-soluble adhesive residues 

• High stress loads in residential, commercial and industrial locations 


Properties: 

• No depth limitation 

• No primer needed up to 1/8” depth - fast application 

• Fast setting, very smooth surface - accelerates fl oor covering installation 

• Versatile - great for forming ramps, deep fi lling and skim coating 

• Exceptionally fi ne aggregates 



® 

LEED 

contributing 

product 


72991 

37259 

10 lb. paper bag 

27.5 lb. paper bag 

4300 psi 

(@ 28 days) 

20 sq. ft./10 lb. bag @ 1/8“ depth 

55 sq. ft./27.5 lb. bag @ 1/8“ depth 

1 hr./

LEVELInG ACCEssORY PRODUCTs 

UZIn RR 201 

substrate Reinforcing Mesh 

Fiberglass reinforcing mesh with extremely high tensile strength and a tremendous 

reinforcing effect when used with UZIN primers and leveling compounds. 


Properties: 

• Old substrates with bonded leveling compound and adhesive layers • High elasticity 

• Various substrates including rough concrete, hardwood, OSB, • Extreme tensile strength 

backer board, stone and ceramic 

• Strong composite system 

• Surfaces exposed to heavy wear 

• No hazardous materials 

Note: See product data sheet for RR 201 for additional product information and detailed application instructions. 

Item # Package Size Color Length/Width 

52154 1 roll/ctn. White 246 lineal feet x 36“ 

UZIn RR 203 

substrate Crack Bridging Material 

Fiberglass crack reinforcement strands used for bridging substrate cracks and joints up to 

1/4” wide and with 3/16” maximum movement. 


Properties: 

• Control joints and trenches in concrete 

• High elasticity 

• Joints in plywood and between different substrate types 

• Extreme tensile strength 

• Wood plank substrates and OSB 

• Strong composite system 

• Existing substrates subject to slight vibration 

• No hazardous materials 

• Use with UZIN patching and smoothing compounds 

Note: See product data sheet for RR 203 for additional product information and detailed application instructions. 

Item # Package Size Color Length/Width 

52155 1 roll/ctn. White 82 lineal feet x 39.5“ 

UZIn Leveling Pins 

Plastic, self-adhesive height measurement pins for use when pouring leveling compounds. 

Suitable for: 

Properties: 

• The correct measurement of leveling compound pours up to 4” • High adhesive strength 

• High visibility neon green 

Item # Package Size Shipping Unit Color 

61834 1 pkg./21 pcs. 1 ctn./5 pkgs. Green 

UZIn Foam Expansion strips 

Self-adhesive polyethelene expansion strips used when pouring leveling compounds. 

Suitable for: 

Properties: 

• Mechanical separation between fl oor and wall, installed 

• High adhesive strength 

prior to the application of leveling compounds 

• 2” high x 3/16” wide 


10122 1 roll 10 rolls/ctn. White 

16

Adhesives 

17

FLOOR COVERInG ADHEsIVEs 

UZIn WK 222 

solvent-Free Contact Adhesive 

solvent Free, 

Low Odor 

Premium solvent-free, water-based contact adhesive. Easily applied with brush or roller, the short 

open time produces a powerful bond, immediately upon contact. The non-flammable, low-VOC 

and low odor content makes it ideal for occupied buildings. 


• Vinyl and rubber wall base, stair treads, transition profiles, flash coving sheet vinyl, linoleum and rubber 

• All textile floor coverings or woven carpets. For contact bonding square nose or bullnose stairs including 

upholstered treads and risers 

• Contact bonding sheet vinyl, cushion vinyl fl oor coverings, linoleum and rubber on staircases 

• All types of constructional contact bonding 

• Heavy duty use in residential, commercial, industrial and sports facility applications 

• Wet shampooing and spray extraction cleaning 

Properties: 

• Powerful bond strength - great for diffi cult to bond products 

• Superb rolling and brushing properties - easy to apply 

• High coverage with supplied roller - low cost per sq. ft. 

• Can be applied one day in advance - long contact bonding time 


® 

LEED 

contributing 

product 

Note: See product data sheet for WK 222 for additional product information and detailed application instructions. 

Item # Package Size Color Coverage Open Time 

61970 

.95 qt. plastic pail Beige 

24-36 sq. ft./pail 

Approx. 20-40 mins. 

61981 

1.44 gal. plastic pail 

144-216 sq. ft./pail 

UZIn WK 222 in practice 

UZIN WK 222 is a solvent-free, water-based contact adhesive 

ideal for use where the demands on healthy indoor climates 

must be observed. Easily applied with brush or roller, UZIN 

WK 222 enables the fast installation of a wide variety of fl oor 

coverings and transition profi les. All textile coverings, even 

cumbersome needle punch or woven carpet, can be applied 

with both speed and ease. 

18

WOOD FLOORInG ADHEsIVEs 

UZIn MK 200 

sTP Wood Flooring Adhesive 

Will not 

Etch Finish 

1-component, solvent and water-free, moisture cured STP (Silane Terminated Prepolymer) 

hybrid adhesive that combines the powerful flexibility of a polyurethane with the advantages 

of modern silane technology. 


• Prefi nished and unfinished engineered wood flooring 

• Solid tongue and groove strip and plank 

• Exotic species, smoked oak 

• Wood flooring on most subfloors with adequate strength such as concrete, fortified gypcrete, 

plywood and OSB 

• Wood flooring on radiant heat systems 

Properties: 

• 1-component - no mixing required 

• Universal range of uses - solids, engineered, unfinished and factory finished 

• Excellent ridge formation and stability - promotes proper adhesive transfer and board positioning 

• Fast, high suction grab - aggressive, wet lay wood floor installation 

• Easy to apply - effortless troweling 

• Easy adhesive removal - will not bond to or etch finish 

• Water and solvent-free - meets strict EMICODE EC 1 R PLUS criteria (healthy indoor air quality) 

Note: See product data sheet for MK 200 for additional product information and detailed application instructions. 


60806 2.6 gal. metal Beige 

65 sq. ft./gal. Does not exceed Approx. 24 hrs./Load bearing 

pail 

170 sq. ft./pail 40 grams/liter 

Approx. 48 hrs./Sanding 

UZIn MK 200 in practice 

The new STP technology of UZIN MK 200 combines the powerful fl exibility of a 1-component polyurethane adhesive with the 

benefi ts of modern silane technology. 

19

WOOD FLOORInG ADHEsIVEs 

UZIn MK 95 

Wood Flooring Adhesive 

Fast setting 

Rapid Grab 

1-component, polyurethane, rapid-setting adhesive with firm ridging and superior green grab, 

making it suitable for the installation of all types of wood flooring. Solvent and water-free, it 

eliminates any swelling effect on moisture sensitive wood flooring species. 


• Solid strip and plank fl ooring, prefi nished and unfi nished, residential or commercial 

• Engineered wood fl ooring of all types, prefi nished and unfi nished, parquet, mosaics and mixed media 

• Sound wood, concrete and gypcrete substrates including radiant heat fl oor systems 

Properties: 

• 1-component - no mixing required 

• Universal range of uses 

• Rapid setting with superior green grab - fast and secure installations 

• Easy to apply - effortless troweling 

• Easy adhesive removal - remove adhesive residue from prefi nished surfaces up to 24 hours after installation 


Note: See product data sheet for MK 95 for additional product information and detailed application instructions. 


44111 2.6 gal. metal Beige 

65 sq. ft./gal. Does not exceed Approx. 24 hrs./Load bearing 

pail 



UZIn MK 92 s 

Wood Flooring Adhesive 

sand & 

Finish in 

8 Hours! 

2-component polyurethane adhesive with high shear strength suited for all types and widths 

of wood flooring especially plank installations 12” and wider. Extremely fast-setting with an 

average working time of 30 minutes. It is very effective for setting starter rows and can usually 

be strapped in 2 to 3 hours. 


• All types and species of prefi nished and unfi nished solid and engineered wood fl ooring 

• Beech, maple, exotics and laminate fl ooring 

• Sound substrates including plywood, OSB, concrete and gypcrete including radiant heat fl oor systems 

Properties: 

• Fast track installations - sand and fi nish in 8 hours 

• Excellent ridge formation - promotes superior contact with boards and substrate 

• Very fast setting with superior green grab - great for starter rows 

• Versatile adhesive - works well with solid or engineered wood 

• High solids, shrink-free formula - holds position through seasonal movement 


Note: See product data sheet for MK 92 S for additional product information and detailed application instructions. 


59640 1.8 gal. plastic Beige 

65 sq. ft./gal. Does not exceed Approx. 2-4 hrs./Load bearing 

pail and bottle 



20

ADHEsIVE ACCEssORY PRODUCTs 

UZIn Clean Box 

Effective 

Adhesive 

Removal 

Highly effective cleaning cloths for removing adhesive residues from surfaces, hands and tools. 

Suitable for: 

• Removing fresh or dried 1-component polyurethane and silane adhesive residues 

• Removing fresh and slightly cured 2-component polyurethane and epoxy resin adhesive residues 

Properties: 

• Dries quickly without leaving residue 

• Multipurpose use - fl oor surfaces, hands and tools 

• Effective cleaning - gentle on skin 

• Fresh citrus scent 

Note: See product data sheet for UZIN Clean Box for additional product information and detailed use instructions. 

Item # Package Size Shipping unit Color 

38465 Plastic drum/72 cloths 6 drums/ctn Green 

Terry Bastian, owner of Bastian’s Carpet One in Allentown, PA 

used the UZIN Moisture Mitigation System on the Phoenixville 

Public Library to meet his requirement. 

UZIN. YOUR FLOOR. OUR PROMISE. 

21

Tools and Accessories 

22

PRIMER / MVR APPLICATIOn TOOLs 

UZIn Foam Roller 10” 

The UZIN Foam Roller 10” is designed for the application of UZIN polyurethane and dispersion-based primers. 

Suitable for: 

Properties: 

• Use with UZIN polyurethane and dispersion-based primers 

• Distributes product evenly 

to floor surface 


9194 10/pkg. 1 pkg. White 

UZIn nylon Fiber Roller 10” 

The UZIN Nylon Fiber Roller 10” is designed for the application of all UZIN 2-component epoxy resin MVR’s. 

Suitable for: 

Properties: 

• Use with UZIN 2-component epoxy resin MVR’s 

• Distributes product evenly 

to floor surface 


9394 10/pkg. 1 pkg. White 

UZIn Roller Frame 10” 

The Roller Frame 10” is designed to hold UZIN 10” roller covers used in the application of 

UZIN epoxy resin MVR’s, polyurethane and dispersion-based primers. 

Suitable for: 

Properties: 

• Use with #9194, #9394 and #61983 UZIN 10” roller covers 

• Heavy duty steel bayonet style frame 


12494 1 each 1 each Red (handle) 

UZIn Extension Pole 

Suitable for: 

Properties: 

• Use with UZIN Roller Frame, Leveling Compound Rake, 

• 2-piece, heavy duty aluminum construction 

Gauge Rake, Spike Roller and Smoother • Extends from 47” to 82” 

• Friction fit knuckle 


12503 1 each 1 each Green (handle) 

23

LEVELInG COMPOUnD MIXInG TOOLs 

UZIn Drum Kit 

The Drum Kit contains: UZIN Mixing Drum 16 gal., Gauge Rake, Smoother, Oval Mixing Paddle, 

Water Buckets 2.4 gal. (2), Pole. 

Suitable for: 

Properties: 

• Mixing, pouring and applying up to 2 bags of UZIN 

• Heavy duty mixing drum 

leveling compounds 

• 2 bag mixing capacity 

• Quality application tools 

Item # Package Size Shipping Unit Weight 

59973 1 each 1 each 19 lbs. 

UZIn Mixing Drum 

The UZIN 16 gallon Mixing Drum has a 2 bag capacity and is made of heavy duty 

HDPE (High Density Polyethylene) plastic. 

Suitable for: 

Properties: 

• Mixing, pouring and applying up to 2 bags of UZIN 

• High impact HDPE plastic 

leveling compounds 

• Tough, durable 

• Comes with lid 


59267 1 each 1 each 12 lbs. 

UZIn Mixing Bucket 

8 gallon heavy duty plastic bucket with handle grips for mixing UZIN liquid and powder products. 

Suitable for: 

Properties: 

• Mixing UZIN powder products 

• Heavy-duty 

• Mixing UZIN 2-component epoxy resin MVR’s 

• 1 bag capacity 


9191 1 each 1 each 4 lbs. 

UZIn Water Bucket 

2.4 gallon transparent plastic bucket with printed liter scale for measuring the correct 

water quantity for UZIN powder products. 

Suitable for: 

Properties: 

• Measurement of correct water quantity when mixing 

• Tough construction 

UZIN powder products 

• Transparent 

• Liter scale 


10412 1 each 1 each 1 lb. 

24

LEVELInG COMPOUnD MIXInG TOOLs 

UZIn Flat Cage Mixing Paddle 

Mixing paddle designed for blending UZIN leveling compounds especially for use with the 

UZIN 8 gallon plastic bucket. 

Suitable for: 

Properties: 

• Mixing UZIN leveling compounds and patches 

• Fast and homogeneous mixing 

• Use with flat-bottom buckets 

• Allows effective mixing into bucket corners 

• 1/2” min. drill chucks 

• Heavy duty steel 



UZIn Oval Mixing Paddle 

Mixer for blending UZIN leveling compounds. It’s oval shape is most effective 

when used with the UZIN Mixing Drum. 

Suitable for: 

Properties: 

• Mixing UZIN leveling compounds 

• Fast and homogeneous mixing 

• Use with UZIN Mixing Drum 




UZIn spiral Mixer 

Mixing paddle especially designed for blending 2-component epoxy resin MVR’s and adhesives. 

Suitable for: 

Properties: 

• Mixing UZIN 2-component epoxy resin MVR’s 

• Spiral design pulls material from sidewalls 

• Mixing UZIN 2-component adhesives 

for complete mixing 


• Helps push material down and together 

for effective blending 



TIPs 

TRADE 

of the 

Choosing the Correct Applicators and Tools 

Choosing and using the recommended applicator 

or tool is essential to achieving the desired final result. 

They will eliminate costly call-backs or repairs from either 

too much or too little material being used with an incorrect 

applicator. Contact the UZIN Technical Services Department 

for additional help with applicator selection. 

25

LEVELInG COMPOUnD APPLICATIOn TOOLs 

UZIn Leveling Compound Rake 

22” Leveling Compound Rake with notched insert to apply 1/8” of leveling compound. 

Notch size: 3/16” x 5/32” x 1/16”. 

Suitable for: 

Properties: 

• Applying leveling compounds at 1/8” depth 

• Heavy duty construction 


52298 

13396 

1 each 

10/pkg. 

1 each 

1 pkg. 

2 lbs. 

1 lb. 

Item #13396 R2 replacement insert 

UZIn Gauge Rake 

24” Gauge Rake with adjustable sleds for use with leveling compounds. 

Suitable for: 

Properties: 

• Applying and gauging leveling compounds 


• Adjusts from 0”-2.25” 



UZIn spike Roller 

29” Spike Roller used during the application of leveling compounds. 

Suitable for: 

Properties: 

• Improving the flow of freshly applied leveling compounds • Strong metal/plastic construction 

• Removing air from freshly applied leveling compounds • Easy to clean 



UZIn smoother 

22” Smoother for use in applying leveling compounds. 

Suitable for: 

• Placing and applying leveling compounds 

• Relieving surface tension in leveling compounds 

Properties: 


• Easy to clean 



Threaded Insert for Tools 

Threaded pole insert for use with UZIN application tools. 


67118 1 each 1 each Black 

26

ADHEsIVE APPLICATIOn TOOLs 

UZIn Foam Roller Coarse 

Roller covers designed for the application of UZIN WK 222 Contact Adhesive. 

Suitable for: 

Properties: 

• Applying UZIN WK 222 Contact Adhesive 

• 10” size for large areas 

• 4” size for small areas, stairs and cove base 


61983 

61984 

10” - 5/pkg. 

4” - 10/pkg. 

1 pkg. 

1 pkg. 

Yellow 

Yellow 

Us Trowel 

U.S. Style B 11 adhesive trowel. 

Suitable for: 

Properties: 

• Applying UZIN wood floor adhesives 

• Stainless steel construction 

• Installing 3/4” strip, plank; prefinished, unfinished 

• Comfort grip handle 

or engineered • Notch size: 3/16” x 1/4” x 5/16” 


52900 6/pkg. 1 pkg. 1 lb. 

Trowel Handles 

ErgoStar trowel handles (uses replacement inserts). 

Suitable for: 

• Applying UZIN wood floor adhesives and MVR’s 

Properties: 

• Ergonomic handle reduces arm fatigue 

• Durable, stainless steel construction 

Item # Size Package Size Shipping Unit Weight 

41784 

41787 

8” (21 cm) 

11” (28 cm) 

10/pkg. 

10/pkg. 

1 pkg. 

1 pkg. 

1 lb. 

1 lb. 

Trowel Inserts 

Tempered spring steel replacement inserts for ErgoStar trowel handles. 

Suitable for: 

• Applying UZIN wood floor adhesives and MVR’s 

B2 Trowel Notch 

3/32”x3/32”x3/32” 


1/8” x 1/8” x 1/8” 


3/16” x 3/16” x 5/16” 

Item # Size Application Package Size Shipping Unit 

13371 

13386 

B2, 8” (21 cm) 

B2, 11” (28 cm) 

All 2-component epoxy moisture vapor 

retarders 

10/pkg. 

10/pkg. 

1 pkg. 

1 pkg. 

13372 

13387 

B3, 8” (21 cm) 

B3, 11” (28 cm) 

Mosaics/parquet or smooth back engineered 

and underlayment 

10/pkg. 

10/pkg. 

1 pkg. 

1 pkg. 

13380 

13399 

B11, 8” (21 cm) 

B11, 11” (28 cm) 

3/4” strip or plank up to 7”; prefi nished, 

unfi nished or engineered with relief back 

10/pkg. 

10/pkg. 

1 pkg. 

1 pkg. 

27

Our Responsibility to the Environment and to Your Health 

Our commitment to health and the environment is not an afterthought... it’s a key objective in our product 

development process. As you can see on the following page, we submit our products to some of the most 

rigorous health and environmental testing on the planet. In every case our products not only meet but exceed 

these demanding requirements. It’s just one more way that you can count on our promise. 

28

LEED® 

contributing 

product 

LEED ® Contributing Product 

This icon has been created by us to recognize those products in our range that qualify for LEED ® points. LEED ® or 

“Leadership in Energy & Environmental Design” is a program developed by the U.S. Green Building Council that provides 

third-party verification of buildings in order to satisfy certain environmental prerequisites and earn points to achieve different 

levels of certification. For more information see www.usgbc.org/leed. 

What it means to the planet 

Products and programs help to conserve energy, water and other resources. 

What it means for humans 

Products and programs help to create healthier and safer environments for occupants. 

ÖKOLINE 

UZIN’s environmentally friendly Ökoline range of products meet the stringent 3rd party testing requirements of GEV 

Emicode and Blue Angel for environmental safety and indoor air quality without sacrificing product effectiveness. 


All Ökoline products are solvent-free and low-emitting which means they do not release 

damaging volatile organic compounds into the environment. 

What it means for humans 

Because the Ökoline range recognizes and meets both GEV Emicode and Blue Angel requirements, 

they help to maintain healthy indoor environments for consumers. 

GEV-Emicode ® 

GEV represents the German acronym for the Association for the Control of Emissions in Products for Flooring Installation, 

Adhesives and Building Materials or Gemeinschaft Emissionskontrollierte Verlegewerkstoffe (see www.emicode.com). 

Emicode ® is GEV’s trademark-protected name for their stringent testing and labeling system that categorizes products into 

3 emission classes: 

EMICODE EC 1 R PLUS = very low emission, regulated • EMICODE EC 1 PLUS = very low emission • EMICODE EC 1 = low emission 


Although its mandate is primarily for the assurance of indoor air quality, by their very nature, these products are 

extremely low-emitting so also do not contribute to greenhouse gas accumulation. 

What it means to humans 

GEV’s extremely stringent standards are recognized internationally as the highest level of indoor air quality protection. 

The Blue Angel 

The Blue Angel was the first environment-related label for products and services in the world. Since 1978 it has set the 

standard for eco-friendly products and services determined by an independent jury and by defined testing criteria.The Blue 

Angel is only awarded to products and services which are of considerable benefit to the environment and, at the same time, 

meet high standards of effectiveness, health and occupational protection (see www.blauer-engel.de/en/). 


Products are solvent-free and low in emissions and do not produce harmful ozone-depleting greenhouse gasses. 

What it means to humans 

Extremely low VOC’s, odors and preservatives which do not affect human health. 

UZIN. YOUR FLOOR. OUR PROMISE. 

29

Contact Information 

About UFLOOR systems Inc. 

UFLOOR Systems Inc. (Aurora, CO USA) is the North American subsidiary 

of Uzin-Utz AG, Ulm, Germany. The company was founded in 1911 and is 

a vertically integrated manufacturer of product systems designed for the 

preparation, installation, fi nishing and care of all types of fl oor coverings. 

UFLOOR Systems offers its products under the UZIN, Pallmann and Wolff 

brand names. 

Contact Information 

Customer Service / Orders 

P : 720.374.4810 

F : 720.374.2113 

Email: info@ufl oorsystems.com 

Technical Customer Service 

P : 720.374.4810 

F : 720.374.2113 

Email: tech@uzin.us 

UFLOOR Systems Inc. 

14509 E. 33rd Place, Unit G, Aurora, CO 80011 

P : 866.505.4810 

www.ufl oorsystems.com 

www.uzin.us 

Gensler Architects’ Washington, D.C. offices | UZIN PE 480, UZIN NC 170, UZIN NC 172, UZIN NC 888, UZIN RR 201, UZIN RR 203 

Contractor: Mid-Atlantic Flooring, Sterling, VA 

30

31 


UZIN | A Brand of UFLOOR Systems Inc. 

UFLOOR Systems Inc. | 14509 E. 33rd Place, Unit G | Aurora, CO 80011 

Phone: 720.374.4810 | Fax: 720.374.2113 

info@ufl oorsystems.com | www.ufl oorsystems.com | www.uzin.us 

02/14 

32

PRODUCT GUIDE

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?