3D Work- and Welding Table D28 - 3 Weld sro

Englisch – English Version 7.0
D28 ProfiLine
… meets the
requirements of
high-quality suppliers
D 28
ProfiLine
3D Work- and
Welding Table D28
Award winning design
D28 ProfiLine
… meets the
requirements of
high-quality suppliers
D 16
ProfiLine
Innovative technology improved

3D WORK AND WELDING TABLE SYSTEM
System Comparison D28–D16
System D28
Bores
Grid
Bolts
28 mm
100 100 mm
28 mm
D28
Scale 1:1
TWO
100
COMPA
PRINCIPLE

Standard Grid
System D16 Grid 5050
Bore Grid 3D-Demmeler System
Diagonal Grid
System D16 Diagonal Grid 5050
Absolute Grid
System D16 Grid 2525
25
50 25 25 25
25 25
50
25
25
25
25
25
100
50
50 100
50 50
50
50
50 50 50
System D28 Grid 100100
System D28 Diagonal Grid 100100
System D28 Grid 5050
System D16
Bores
Grid
Bolts
16 mm
50 50 mm
16 mm
Refer to our brochure
3D Work and Welding Table
System D16
SYSTEMS
%
TIBLE
D16
Scale 1:1
ONE
2|3

Description
Universal 3D Work and Welding Table
– The new diagonal grid offers additional clamping possibilities
(Double the number of bores)
– Stiffener plate offers higher stability
– Stiffener plate with openings keeps dirt out from under the table
– Basic elements of the Demmeler System
– Strong heavy ribbing and high quality steel provide for high stability and four
additional clamping surfaces
– Table has high loading capacity (10 tons per leg max.).
– With a 100 x 100 mm grid pattern of bores, the table is expandable in all five
directions over the full length, width and height
– Fixtures can be quickly and accurately built using the grid bores, grid lines and
integrated scales with axis indicators.
– Uneven floors and height differences are compensated for with adjustable
pivoting feet
– Leg Sleeves prevent snagging of welding cables and protect the threads from dirt
– The highest quality comes from using modern manufacturing methods (multisided
machining)
Diagonal grid
1 mm
scale
Grid lines every
100 mm
Axis indicator
System bore
Standard leg
Telescoping leg
Set of heavy
duty wheels
850 + 30 mm
200 mm
Leg sleeve
Includes
anchoring
screws
Anchoring leg
Sandwich construction
for torsional stability
Stiffener plate
Scissor lift
Special designs on request:
– Special tables sizes and heights
– Surface hardening, approx 0.5 mm deep / 55 HRC
– Other materials (e.g. Stainless steel)
– Double bore pattern
– Without bores
Spacer frame

with
diagonal grid
and
stiffener plate
with
100 mm grid
without
stiffener plate
Technical Description Part Number Part Number
3D Work Table with Standard Legs
Overall height 850 mm + 30 mm fine adjustment, high table load capacity
3D Work Table 1000 1000 850 mm table height with 4 Standard legs. Weight approx 385 kg P28-01001-001 D28-01001-001
3D Work Table 1200 1200 850 mm table height with 4 Standard legs. Weight approx 550 kg P28-01056-001 D28-01056-001
3D Work Table 1500 1000 850 mm table height with 4 Standard legs. Weight approx 578 kg P28-01011-001 D28-01011-001
3D Work Table 1500 1500 850 mm table height with 4 Standard legs. Weight approx 700 kg P28-01031-001 D28-01031-001
3D Work Table 2000 1000 850 mm table height with 4 Standard legs. Weight approx 670 kg P28-01002-001 D28-01002-001
3D Work Table 2400 1200 850 mm table height with 4 Standard legs. Weight approx 880 kg P28-01003-001 D28-01003-001
3D Work Table 3000 1500 850 mm table height with 6 Standard legs. Weight approx 1420 kg P28-01004-001 D28-01004-001
3D Work Table 4000 2000 850 mm table height with 6 Standard legs. Weight approx 2500 kg P28-01005-001 D28-01005-001
3D Work Table with Telescoping Legs
Adjustable height from 750 to 1100 mm (adjustment with fine-pitch thread)
3D Work Table 1000 1000 750 – 1100 mm table height with 4 Telescoping legs. Weight approx 400 kg P28-01001-002 D28-01001-002
3D Work Table 1200 1200 750 – 1100 mm table height with 4 Telescoping legs. Weight approx 570 kg P28-01056-014 D28-01056-014
3D Work Table 1500 1000 750 – 1100 mm table height with 4 Telescoping legs. Weight approx 600 kg P28-01011-014 D28-01011-014
3D Work Table 1500 1500 750 – 1100 mm table height with 4 Telescoping legs. Weight approx 725 kg P28-01031-002 D28-01031-002
3D Work Table 2000 1000 750 – 1100 mm table height with 4 Telescoping legs. Weight approx 685 kg P28-01002-002 D28-01002-002
3D Work Table 2400 1200 750 – 1100 mm table height with 4 Telescoping legs. Weight approx 895 kg P28-01003-002 D28-01003-002
3D Work Table 3000 1500 750 – 1100 mm table height with 6 Telescoping legs. Weight approx 1450 kg P28-01004-002 D28-01004-002
3D Work Table 4000 2000 750 – 1100 mm table height with 6 Telescoping legs. Weight approx 2550 kg P28-01005-002 D28-01005-002
3D Work Table with Heavy Duty Wheels
For easy repositioning of the 3D table, 4 steerable wheels, two with brakes. Overall height 850 mm + 30 mm fine adjustment.
Note: There will be a reduction in part load capacity!
3D Work Table 1000 1000 850 mm table height with set of Heavy duty wheels, max table load 2000 kg. Weight approx 390 kg P28-01001-003 D28-01001-003
3D Work Table 1200 1200 850 mm table height with set of Heavy duty wheels, max table load 1600 kg. Weight approx 550 kg P28-01056-015 D28-01056-015
3D Work Table 1500 1000 850 mm table height with set of Heavy duty wheels, max table load 1600 kg. Weight approx 578 kg P28-01011-015 D28-01011-015
3D Work Table 1500 1500 850 mm table height with set of Heavy duty wheels, max table load 1600 kg. Weight approx 720 kg P28-01031-003 D28-01031-003
3D Work Table 2000 1000 850 mm table height with set of Heavy duty wheels, max table load 1700 kg. Weight approx 675 kg P28-01002-003 D28-01002-003
3D Work Table 2400 1200 850 mm table height with set of Heavy duty wheels, max table load 1500 kg. Weight approx 885 kg P28-01003-003 D28-01003-003
3D Work Table with Anchoring Legs
For anchoring the work table to the floor to prevent movement during use (e.g. when using robots).
Total height 850 mm + 30 mm fine adjustment.
3D Work Table 1000 1000 850 mm table height with 4 Anchoring legs. Weight approx 385 kg P28-01001-004 D28-01001-004
3D Work Table 1200 1200 850 mm table height with 4 Anchoring legs. Weight approx 550 kg P28-01056-016 D28-01056-016
3D Work Table 1500 1000 850 mm table height with 4 Anchoring legs. Weight approx 578 kg P28-01011-016 D28-01011-016
3D Work Table 1500 1500 850 mm table height with 4 Anchoring legs. Weight approx 720 kg P28-01031-004 D28-01031-004
3D Work Table 2000 1000 850 mm table height with 4 Anchoring legs. Weight approx 670 kg P28-01002-004 D28-01002-004
3D Work Table 2400 1200 850 mm table height with 4 Anchoring legs. Weight approx 880 kg P28-01003-004 D28-01003-004
3D Work Table 3000 1500 850 mm table height with 6 Anchoring legs. Weight approx 1420 kg P28-01004-003 D28-01004-003
3D Work Table 4000 2000 850 mm table height with 6 Anchoring legs. Weight approx 2500 kg P28-01005-003 D28-01005-003
3D Work Table with Scissor Lift
From 450 mm to 1350 mm overall height with safety control panel, scissor lift completely matched to 3D work table.
Other payloads or lifting heights on request
3D Work Table 1000 1000 mm with Scissor Lift approx 570 kg, max. Payload 600 kg, Height: 435 – 1460 mm P28-01001-005 D28-01001-005
3D Work Table 1200 1200 mm with Scissor Lift approx 920 kg, max. Payload 950 kg, Height: 450 – 1350 mm P28-01056-017 D28-01056-017
3D Work Table 1500 1000 mm with Scissor Lift approx 855 kg, max. Payload 1300 kg, Height: 480 – 1280 mm P28-01011-017 D28-01011-017
3D Work Table 1500 1500 mm with Scissor Lift approx 1400 kg, max. Payload 1300 kg, Height: 480 – 1280 mm P28-01031-005 D28-01031-005
3D Work Table 2000 1000 mm with Scissor Lift approx 1350 kg, max. Payload 1300 kg, Height: 480 – 1480 mm P28-01002-005 D28-01002-005
3D Work Table 2400 1200 mm with Scissor Lift approx 1700 kg, max. Payload 1100 kg, Height: 480 – 1780 mm P28-01003-005 D28-01003-005
3D Work Table 3000 1500 mm with Scissor Lift approx 2800 kg, max. Payload 1600 kg, Height: 550 – 1450 mm P28-01004-004 D28-01004-004
3D Work Table with Spacer Frame
For fast setup and accurate locating with PC bolt Part No. D28-06001-000 on
base rail, Part No D28-02003-XXX, overall height 850 mm ± 0,1
3D Work Table 1000 1000 850 mm table height with Spacer Frame. Weight approx 650 kg P28-01001-006 D28-01001-006
3D Work Table 1200 1200 850 mm table height with Spacer Frame. Weight approx 780 kg P28-01056-018 D28-01056-018
3D Work Table 1500 1000 850 mm table height with Spacer Frame. Weight approx 975 kg P28-01011-018 D28-01011-018
3D Work Table 1500 1500 850 mm table height with Spacer Frame. Weight approx 950 kg P28-01031-006 D28-01031-006
3D Work Table 2000 1000 850 mm table height with Spacer Frame. Weight approx 940 kg P28-01002-006 D28-01002-006
3D Work Table 2400 1200 850 mm table height with Spacer Frame. Weight approx 1150 kg P28-01003-006 D28-01003-006
3D Work Table 3000 1500 850 mm table height with Spacer Frame. Weight approx 1770 kg P28-01004-005 D28-01004-005
3D Work Table 4000 2000 850 mm table height with Spacer Frame. Weight approx 2850 kg P28-01005-004 D28-01005-004
4|5
Modifications reserved

Description
Universal 3D Cast Work and Welding Table
– Heavy diagonal ribbing provides maximum bending and torsional stiffness
– The special selection of material makes the table insensitive to weld spatter
and dirt
– The high quality casting allows for high table loading capacity
– The underside of the standard table offers the best extension possibilities
by allowing mounting of various legs, spacer frames, scissor lifts and positioners
– The 100 mm 100 mm square modular grid is expandable on all five directions
over the entire length, width and height
– Repeatable fixtures can be quickly and accurately built using the grid bores,
grid lines and integrated scales with axis indicators
– Fine adjustment of pivoting feet
– The highest quality comes from using modern manufacturing methods
(multi-sided machining)
1 mm
scale
Grid lines every
100 mm
Axis indicator
System bore
Standard leg
Telescoping leg
200 mm
Set of heavy
duty wheels
850 + 30 mm
Includes
anchoring
screws
Anchoring leg
Leg Sleeve
Scissor lift
Spacer frame

Technical Description
Part Number
3D Cast Work Table with Standard Legs
Total height 850 mm + 30 mm fine adjustment, high table load capacity
3D Cast Work Table 2000 1000 850 mm table height with 4 Standard legs. Weight approx 670 kg
3D Cast Work Table 2400 1200 850 mm table height with 4 Standard legs. Weight approx 880 kg
D28-01002-019
D28-01003-009
3D Cast Work Table with Telescoping Legs
Adjustable height from 750 to 1100 mm (adjustment with fine-pitch thread)
3D Cast Work Table 2000 1000 850 mm table height with 4 Telescoping legs. Weight approx 685 kg
3D Cast Work Table 2400 1200 850 mm table height with 4 Telescoping legs. Weight approx 895 kg
D28-01002-020
D28-01003-010
3D Cast Work Table with Heavy Duty Wheels
For easy repositioning of the 3D table, 4 steerable wheels, two with brakes.
Overall height 850 mm + 30 mm fine adjustment. Note: There will be a reduction in part load capacity!
3D Cast Work Table 2000 1000 850 mm table height with set of Heavy duty wheels, Weight approx 675 kg
3D Cast Work Table 2400 1200 850 mm table height with set of Heavy duty wheels, Weight approx 885 kg
D28-01002-021
D28-01003-011
3D Cast Work Table with Anchoring Legs
For anchoring the work table to the floor to prevent movement during use (e.g. when using robots).
Total height 850 mm + 30 mm fine adjustment
3D Cast Work Table 2000 1000 850 mm table height with 4 Anchoring legs. Weight approx 670 kg
3D Cast Work Table 2400 1200 850 mm table height with 4 Anchoring legs. Weight approx 880 kg
D28-01002-022
D28-01003-012
3D Cast Work Table with Scissor Lift
From 450 mm to 1350 mm overall height with safety control panel, scissor lift completely matched to 3D work table.
Other payloads or lifting heights on request
3D Cast Work Table 2000 1000 mm with Scissor Lift approx 1350 kg, max. Payload 1300 kg
3D Cast Work Table 2400 1200 mm with Scissor Lift approx 1700 kg, max. Payload 1100 kg
D28-01002-023
D28-01003-013
3D Cast Work Table with Spacer frame
For fast setup and accurate locating with PC bolt Part No. D28-06001-000 on base rail,
Part No D28-02003-XXX, overall height 850 mm ± 0,1
3D Cast Work Table 2000 1000 850 mm table height with Spacer Frame. Weight approx 940 kg
3D Cast Work Table 2400 1200 850 mm table height with Spacer Frame. Weight approx 1150 kg
D28-01002-024
D28-01003-014
6|7
Modifications reserved!

Description
Base Plate Table
– The simpler and less expensive version of a 3D work and
welding table
– Especially suitable for simpler workpieces
– Endless possibilities with the grid pattern of bores
– Includes 12 pivoting and lockable side stops
Axis indicator
Grid lines every
100 mm
Standard leg
Side stop
Ribbing
Telescoping leg
Set of heavy
duty wheels
Includes
anchoring
screws
Anchoring leg
Torsionally stable
using sandwich-like
construction
Stiffener plate
Special designs on request:
– Special table sizes and heights
– Surface hardening, approx 0.5 mm deep / 55 HRC
– Optional material (e.g. stainless steel)
– Double bore pattern
– Without bores

Technical Description
Part Number
Base Plate Table with Standard Legs
Total height 850 mm + 30 mm fine adjustment
Base Plate Table 2000 1000 850 mm with Standard legs. Weight approx 480 kg
Base Plate Table 2400 1200 850 mm with Standard legs. Weight approx 620 kg
D28-01102-001
D28-01103-001
Base Plate Table with Telescoping Legs
Adjustable height from 750 to 1100 mm (adjustment with fine-pitch thread)
Base Plate Table 2000 1000 mm with Telescoping legs. Weight approx 480 kg
Base Plate Table 2400 1200 mm with Telescoping legs. Weight approx 620 kg
D28-01102-002
D28-01103-002
Base Plate Table with Set of Heavy Duty Wheels
For easy repositioning of the 3D table, 4 steerable wheels, two with brakes. Overall height 850 mm + 30 mm fine adjustment.
Note: There will be a reduction in part load capacity!
Base Plate Table 2000 1000 850 mm with set of Heavy duty wheels. Weight approx 490 kg max. Table load capacity 1500 kg
Base Plate Table 2400 1200 850 mm with set of Heavy duty wheels. Weight approx 630 kg max. Table load capacity 1350 kg
D28-01102-003
D28-01103-003
Base Plate Table with Anchoring Legs
For anchoring the work table to the floor to prevent movement during use (e.g. when using robots).
Total height 850 mm + 30 mm fine adjustment
Base Plate Table 2000 1000 850 mm with Anchoring legs. Weight approx 480 kg
Base Plate Table 2400 1200 850 mm with Anchoring legs. Weight approx 620 kg
D28-01102-025
D28-01103-018
8|9
Modifications reserved!

Description Technical Description Part Number
Foundation Elements
200mm
200 mm
new
U-shaped spacer bridge
– Can be used as an add-on item for bearing and foundation
rail systems
– Additional holes on the underside
– Together with a spacer angle, a U-shaped frame can set up
– Hole spacing on the underside matching foundation rail
width, i.e., 1000, 2000, 3000, 4000 mm
– Dimensions: U-Form Bridge L1000 (200 200)
U-Form Bridge L1200 (200 200)
U-Form Bridge L1500 (200 200)
U-Form Bridge L2000 (200 200)
U-Form Bridge L2400 (200 200)
U-Form Bridge L2500 (200 200)
U-Form Bridge L3000 (200 200)
U-Form Bridge L4000 (200 200)
D28-04006-001
D28-04006-002
D28-04006-003
D28-04006-004
D28-04006-005
D28-04006-006
D28-04006-007
D28-04006-008
LENGTH | WIDTH | HEIGHT | WEIGHT
s.o. 200 mm 200 mm –
200mm
400 mm
– Dimensions: U-Form Bridge L1000 (400 200)
U-Form Bridge L1200 (400 200)
U-Form Bridge L1500 (400 200)
U-Form Bridge L2000 (400 200)
U-Form Bridge L2400 (400 200)
U-Form Bridge L2500 (400 200)
U-Form Bridge L3000 (400 200)
U-Form Bridge L4000 (400 200)
D28-04007-001
D28-04007-002
D28-04007-003
D28-04007-004
D28-04007-005
D28-04007-006
D28-04007-007
D28-04007-008
LENGTH | WIDTH | HEIGHT | WEIGHT
s.o. 400 mm 200 mm –
200mm
400mm
600mm
new
Foot for U-shaped spacer bridge
– Link between U-shaped spacer bridge and bearing and
foundation rail
– Requires two D28-06003-000 sleeves for each foot
– for U-shaped spacer bridge 200 mm wide: 200 200 mm
400 200 mm
600 200 mm
– for U-shaped spacer bridge 400 mm wide: 200 400 mm
400 400 mm
600 400 mm
D00-10017-000
D00-10017-001
D00-10017-002
D00-10017-010
D00-10017-011
D00-10017-012
200400 mm
200400 mm
200400 mm
LENGTH | WIDTH | HEIGHT | WEIGHT
– s.o. s.o. –
Finish milled
on 6 sides
M8 tapped holes
for side stops
Diagonal Grid
Additional dimensions on request!
Clamping and Adapter Plate
– Use with 3D table for robot welding or with a welding positioner
– As an interchangeable pallet
– Both sides useable
– 3 PC bolts D28-06004-000 and 3 bushings
D28-02002-000 quickly and accurately clamp the adapter
plate to a base plate or positioner
– With lighter weights and double bore pattern, many more
fixtures are possible and in a smaller area
– Special sizes on request!
LENGTH | WIDTH | HEIGHT | WEIGHT
1000 mm 800 mm 25 mm 140 kg
D28-02001-000

Description Technical Description Part Number
PC-Bolts
Space frame
Base rail
System bore
Support plate
Base Rail
1000 mm long
2000 mm long
preferred length 3000 mm long
preferred length 6000 mm long
D28-02003-000
D28-02003-001
D28-02003-002
D28-02003-041
Leveling screw
Hold down bolt
Expansion sleeve
– Serves to build much larger grid patterns
– Fixture large parts both directly on the rails or indirectly
on system components like the 3D table
– Anchored and leveled by mounting to the floor
(rails can also be inlaid in the floor)
– Screw sets, anchor bolts and leveling plates included
– An assembly kit with template is available for precise
installation
– Installation proposal on request
LENGTH | WIDTH | HEIGHT | WEIGHT
see above 120 mm 40 mm 34 kg
Adapter Plates for Flanges
– Pipe flanges can be mounted quickly and accurately with alignment pins on a bolt circle.
The system bores handle the clamping elements
– The plate is attached to a locating angle with PC D28-06004-000
– 8 alignment pins are included with each plate
– Other nominal sizes on request
Bolt circle
Adapter Plate for Flange DIN 2632/2633
– Nominal Size DN 15 – DN 200
Alignment pins:
13,8 mm
17,8 mm
21,8 mm
25,8 mm
D28-02005-000
LENGTH | WIDTH | HEIGHT | WEIGHT
350 mm 250 mm 25 mm 12 kg
Bolt circle
Adapter Plate for Flange DIN 2632/2633
– Nominal Size DN 15 – DN 400
– Nominal Size DN 50 – DN 300
Alignment pins:
13,8 mm
17,8 mm
21,8 mm
25,8 mm
29,8 mm
32,8 mm
D28-02006-000
LENGTH | WIDTH | HEIGHT | WEIGHT
550 mm 350 mm 25 mm 30 kg
10 |11
Modifications reserved!

Description Technical Description Part Number
Clamping and Locating Angle
– Fixed and infinitely adjustable
– Ideal for tight locations
– Black Oxide Finish
Clamping and Locating Angle
Bored / Slotted
Slotted / Slotted
Bored / Bored
D28-03001-000
D28-03001-003
D28-03001-004
– Scale on both sides. Measuring alignment using the grid
lines on the 3D Work Table possible
Bored / Slotted
D28-03001-000
Slotted / Slotted
D28-03001-003
Bored / Bored
D28-03001-004
(without scale)
LENGTH | WIDTH | HEIGHT | WEIGHT
175 mm 50 mm 175 mm approx 1.5 kg
Clamping and Locating Angle | Small
– Scale on both sides. Measuring alignment using the grid
lines on the 3D Work Table possible
D28-03001-005
LENGTH | WIDTH | HEIGHT | WEIGHT
175 mm 50 mm 75 mm approx 1.0 kg
Clamping and Locating Angle | 75
D28-03001-008
LENGTH | WIDTH | HEIGHT | WEIGHT
75 mm 50 mm 75 mm approx 0.5 kg
Clamping and Locating Angle
– For use with lighter workpieces
– Scale on both sides. Setup using the grid lines on the
3D Work Table possible
D28-03008-000
LENGTH | WIDTH | HEIGHT | WEIGHT
175 mm 50 mm 275 mm 2.0 kg
Angle Bracket
– For use as a clamping and locating angle for workpieces
or system components
– As a direct connection of the 3D Work Table and Base Rail
D28-50003-000
LENGTH | WIDTH | HEIGHT | WEIGHT
150 mm 75 mm 75 mm 3.0 kg

Attachment
areas
machined
Weight
reduction
Description Technical Description Part Number
Clamping and Locating Angle
– Fixed or infinitely adjustable
– Four full clamping sides with system bores provide multiple fixturing possibilities
– Special casting (highest stability and toughness)
– Easier sliding because of the steel casting
– All PC Bolt surfaces are machined eliminating cocking of the bolt head
– Optimal ergonomic design and weight
– Available in both left and right hand configuration
– Grid lines on the face shorten construction times
– Recommended to be ordered in pairs
– Used as a tall locator or as a table extension
– With top plate for extended surfaces
– Includes fine scale for setup alignment measurement
– Powder coated
with scale
Clamping and Locating Angle
Right
Left
D28-03002-000
D28-03002-001
D28-03002-000
D28-03002-001
LENGTH | WIDTH | HEIGHT | WEIGHT
275 mm 100 mm 300 mm approx 12 kg
with scale
Clamping and Locating Angle
Right
Left
D28-03003-000
D28-03003-001
D28-03003-000
D28-03003-001
LENGTH | WIDTH | HEIGHT | WEIGHT
375 mm 100 mm 600 mm approx 21 kg
12 |13
Modifications reserved!

Description Technical Description Part Number
with scale
Clamping and Locating Angle
Right
Left
D28-03004-000
D28-03004-001
extra
clamping bar
D28-03004-000
D28-03004-001
LENGTH | WIDTH | HEIGHT | WEIGHT
375 mm 100 mm 800 mm approx 26 kg
Universal Adjustable Angle
D28-03007-000
Clamping piston
Expanding sleeve
Cross section view
of the hydromechanical
lock
SW 14
– Infinitely adjustable 0° – 225° adjustable with scale
– Hydro-mechanical clamping:
• Absolutely maintenance free
• Holding force to 5000 Nm torque
– Compatible with other system components
– Useable both horizontally and vertically
– Powder coated
Oil canal
Oil
Grid lines
With brake
1°-Scale
0° – 225°
LENGTH | WIDTH | HEIGHT | WEIGHT
475 mm 100 mm 100 mm approx 22 kg

Description Technical Description Part Number
Grid lines
Console
– Five full clamping sides with system bores
provides a multitude of possibilities
– Interface element between the various system components
– Many versatile combinations:
• with 50 mm system bore grid
• with slots (variable adjustment)
– Made as a single casting ensuring high stability and
easy handling
– Use as a riser or an extension
– Powder coated
D28-03005-001
LENGTH | WIDTH | HEIGHT | WEIGHT
300 mm 200 mm 100 mm approx 25 kg
90°
Corner Module
– Use as:
• Diagonal table extension
• V-block, support and locator
• Corner locator for additional components
– 5 Sided clamping, locating and supporting surfaces
provide great flexibility
– As an adapter, compatible with all other 3D system
components
– Minimum weight but high stability
– Perfect in function, ergonomics and design
– Powder coated
D28-04005-000
LENGTH | WIDTH | HEIGHT | WEIGHT
200 mm 200 mm 175 mm approx 13.5 kg
Adapter Plate
– As an interface between 3D system and individual components
i.e. for welding / bolting of special user elements
D28-05010-000
LENGTH | WIDTH | HEIGHT | WEIGHT
150 mm 150 mm 25 mm approx 3.3 kg
14 |15
Modifications reserved!

Description Technical Description Part Number
Connection Angle
– Use as a bridge between two clamping and locating angles
or 3D tables
– Useable as a 4-sided locating support or table extension
– For use where space is limited
– Powder coated
D28-04004-000
Grid lines
Additional sizes on request
LENGTH | WIDTH | HEIGHT | WEIGHT
500 mm 100 mm 100 mm approx 14 kg
Grid lines
Clamping Track
– Use: 5-sided
Clamping track 1000 long
Clamping track 2000 long
Clamping track 3000 long
– Additional clamping sides mean more applications
– All 5 Sides with system bores at 100 mm spacing
D28-04010-001
D28-04010-002
D28-04010-003
Grid lines
LENGTH | WIDTH | HEIGHT | WEIGHT
see above 100 mm 100 mm approx 55 kg each 500 mm
Grid lines
Additional sizes on request
Spacer Block L-Form
– Use: 4-sided 500 mm long
1000 mm long
1500 mm long
2000 mm long
– As Table extension or for connecting multiple 3D tables
– Third axis extension as a clamping tower or as a lateral
table locator
– Connection system components
– Powder coated
– Diagonal grid 100 100 mm
LENGTH | WIDTH | HEIGHT | WEIGHT
see above 200 mm 100 mm approx 25 kg each 500 mm
D28-04001-000
D28-04001-001
D28-04001-002
D28-04001-003
Grid lines
Additional sizes on request
Spacer Block U-Form
– Use: 5-sided 500 mm long
1000 mm long
1500 mm long
2000 mm long
3000 mm long
4000 mm long
– Like the D28-04001 but more rigid and broader
– Additional clamping sides mean more applications possible
– As a table extension; for spacer blocks 1 m and longer,
support leg D00-10010-XXX can be added
LENGTH | WIDTH | HIGHT | WEIGHT
see above 200 mm 200 mm approx 50 kg each 500 mm
D28-04002-000
D28-04002-001
D28-04002-002
D28-04002-003
D28-04002-004
D28-04002-005

Description Technical Description Part Number
Universal-Stops
– These stops are fixed or infinitely adjustable on the 3D table and accessories
– The special shape of the universal stop allows locating of workpieces around all sides and also in the milled notches
– The bore in the universal stop serves as a clamp lock for all swing clamps offered in the catalog, or for mounting of toggle clamps or other
positioning and clamping components using an adapter with tapered locking screw or PC bolt
– Black Oxide Finish
Universal-Stop | Small
– Used where space is limited
D28-05002-000
LENGTH | WIDTH | HEIGHT | WEIGHT
100 mm 50 mm 25 mm approx 0.7 kg
Universal-Stop | Large
– Can be located and locked on all five sides of the table’s grid
pattern in increments of 25 mm or on angles of 45°, 90°,
135°, 180°
– Slot makes this infinitely adjustable
D28-05001-000
LENGTH | WIDTH | HEIGHT | WEIGHT
225 mm 50 mm 25 mm approx 1.2 kg
5 mm
stroke
Spring loaded plunger
Universal-Stop | Large with Plunger
– Like the universal stop | Large D28-05001-000
– With additional spring loaded plunger for clamping of
sheet metal and formed parts
– No additional clamping of the workpieces is necessary
D28-05001-001
LENGTH | WIDTH | HEIGHT | WEIGHT
225 mm 50 mm 25 mm approx 1.2 kg
Universal-Stop | with Scale
– Infinite alignment using the scale and grid lines
D28-05001-010
Scale
both sides
LENGTH | WIDTH | HEIGHT | WEIGHT
225 mm 50 mm 25 mm approx 1.3 kg
Universal-Stop | L 300 | L 500
– Larger setting range
– Three to seven system bores
– To bridge over larger locating surfaces
300 mm long
500 mm long
D28-05009-000
D28-05009-008
LENGTH | WIDTH | HEIGHT | WEIGHT
see above 50 mm 25 mm approx 1.8 – 3.0 kg
16 |17
Modifications reserved!

Description Technical Description Part Number
Scale
both sides
Offset Stop | L 150
D28-05015-000
LENGTH | WIDTH | HEIGHT | WEIGHT
150 mm 50 mm 25 mm approx 0.9 kg
Stop Bar / Flat Angle
– Larger dimensions, higher stability larger locating surfaces and more fixturing possibilities
– Fixed and infinitely adjustable on the 3D table and accessories
– System bores serve as clamp locks for all swing clamps offered, or for mounting V-blocks, angles, PC bolts, etc.
– Black Oxide Finish
Stop Bar L 500 | L 800 | L 1000
500 mm long
800 mm long
1000 mm long
D28-05003-000
D28-05003-001
D28-05003-008
LENGTH | WIDTH | HEIGHT | WEIGHT
see above 100 mm 25 mm approx 7 – 14 kg
Flat Clamping Support
1000 mm long
2000 mm long
2400 mm long
– Used as a stop bar or support, mainly with other system
components such as clamping support table
D28-04000-001
D28-04000-002
D28-04000-004
LENGTH | WIDTH | HEIGHT | WEIGHT
see above 100 mm 25 mm approx 18 – 43 kg
Flat Angle
– Infinite positioning at 90° angles
– Can be used left or right hand
D28-03006-000
LENGTH | WIDTH | HEIGHT | WEIGHT
500 mm 375 mm 25 mm approx 11 kg

Description Technical Description Part Number
V-Blocks
– For positive location of pipes
– For V-Blocks larger than 80 mm diameter, use the 9009 adjustable spacer for infinite height adjustment
– With spacers from the spacer set, height can be adjusted in 0.5 mm increments
– Fits all system bores
– Black Oxide Finish
V-Block 58 | 130°
Steel Black Oxide Finish
D28-09001-000
Stainless Steel
D28-09001-002
Polyamide
D28-09001-003
– Attached with a tapered locking screw
– For tube diameters up to 70 mm
– Double V-Block
Steel, Black Oxide Finish
Stainless Steel
Polyamide
LENGTH | Ø | | WEIGHT
50 mm 58 mm 130° approx 0.7 kg
D28-09003-000
D28-09003-002
D28-09003-001
V-Block 80 | 90°
Steel Black Oxide Finish
D28-09004-000
Stainless Steel
D28-09004-003
Polyamide
D28-09004-001
– With support post attached
– For tube diameters up to 100 mm
– Can be used for square and rectangular tubing
– Double V-Block
Steel, Black Oxide Finish
Stainless Steel
Polyamide
LENGTH | Ø | | WEIGHT
190 mm 80 mm 90° approx 2.1 kg
D28-09004-000
D28-09004-003
D28-09004-001
V-Block 110 | 120°
Steel Black Oxide Finish
D28-09005-000
Stainless Steel
D28-09005-002
Polyamide
D28-09005-001
– With support post attached
– For tube diameters up to 180 mm
– Double V-Block
Steel, Black Oxide Finish
Stainless Steel
Polyamide
LENGTH | Ø | | WEIGHT
190 mm 110 mm 120° approx 3.8 kg
D28-09005-000
D28-09005-002
D28-09005-001
V-Block 140 | 140°
– With support post attached
– For tube diameters up to 400 mm
Steel, Black Oxide Finish
Stainless Steel
Polyamide
D28-09006-000
D28-09006-002
D28-09006-001
Steel Black Oxide Finish
D28-09006-000
Stainless Steel
D28-09006-002
Polyamide
D28-09006-001
LENGTH | Ø | | WEIGHT
190 mm 140 mm 140° 5.3 kg
18 |19
Modifications reserved!

Description Technical Description Part Number
Supports
– Can be inserted into any fixed or adjustable locating point and surface anywhere in the system
– Optional materials available (e.g. stainless steel)
– Black Oxide Finish
Spacer Set 11 Pieces
– From 5 – 100 mm above the reference surface
– Smallest increment 0.5 mm
– Includes 1 / 10 “ Inch spacer (2,54 mm)
– With sizes etched on the surface of each spacer
– Fits all system bores
– Self locking with O-Ring
– Top surface has an M10 Tapped hole for customer
specific components or V-blocks
D28-09001-000
LENGTH | WIDTH | HEIGHT |
125 mm – – 50 mm
Stainless Steel Support
– For avoiding ferritic contact between carbon steel
and non-rusting materials (e.g. stainless steel)
– 50 mm bore grid
– Stainless steel support with locating pins
– Shipped with: 1 m support, 4 locating pins
with tapered locking screws
– Standard length is 1 m and can be cut to length
by user
D28-09000-000
LENGTH | WIDTH | HEIGHT | WEIGHT
100 mm 25 mm 10 mm approx 1.6 kg
Adjustable Spacer
– Infinite height adjustment from 75 – 95 mm
– Can be used to adjust the height of V-Blocks for
pipes over 80 mm diameter
D28-09009-000
LENGTH | WIDTH | HEIGHT |
– – max. 95 mm 80 mm
Adjusting spindle L280
– to adjust an infinitely variable support
– clamping in positions which are hard to reach
D28-09008-000
LENGTH | WIDTH | HEIGHT |
280 mm – – 28 /40 mm

min.
Clamping Grenzspannbereiche Range SPS-Bolzen FPC Bolts D28-06007-000
105.5
PC SPS-Bolzen Bolts with mit Handle Griff max.
M283
114
98.5
(43)
12
12
19
38
345°
345°
61
34
19
53
22 28 12
(50)
Description Technical Description Part Number
Fixed Locator and
support
Locator with
pivoting equalize
Indexable Bushing
– Fits all system bores
– Used as a fixed locator and support
– By rotating 180° and inserting a ball pin and tilting pad,
it can be used as a pivoting support
– As a pivoting support for special free form surfaces
– Shipped with: Indexable bushing, pad and ball pin
D28-07016-000
LENGTH | WIDTH | HEIGHT |
– – 40 mm 40 mm
FPC Bolts (Fast Positioning and Clamping Bolts)
– Connecting element from table to table; table to supports, angles, consoles, and adapter plates
– Quick acting connection of system components. By activating the eccentric cam, it shortens fixture
building times
– Ergonomic design results in easy handling and one-handed operation
– Defined adjustable position and optimized thickness ensures constant maximum clamping force
– By simply setting the adjusting brake ring, it is possible to clamp different material thicknesses
– Finish ground for highest precision
– High quality, hardened materials
– Bolts are unaffected by dirt, the O-Ring cleans the bore
– High clamping force and shear strength
Clamping in a tight space with
three PC bolts
FPC Bolts with Handle
– Used without additional tools
D28-06007-000
Adjust
Clamped
Clamped
FPC Bolts with Handle
LENGTH | WIDTH | HEIGHT |
206 mm – – 28 – 0.01 mm
20|21
Modifications reserved!

Description Technical Description Part Number
PC Bolts (Positioning and Clamping)
– Connecting element from table to table, supports, angles, consoles, adapter plates, transport rings, etc.
– Quick acting with simultaneous action from both sides with large clamping range
– Very high clamping force generated by a planetary gear-like action (a double-start thread is not used)
– Self centering with an O-Ring and positive force of five balls being driven outward
– Finish ground for highest precision
– High quality, hardened materials
– Integral O-Rings prevent the bolt from turning during tightening / loosening
– O-Ring cleans the system bores / Bolts are unaffected by dirt
– Clamp using hex key SW 14 or a torque wrench (see page 36)
– Clamping force approx 50 kN
– Shear strength approx 250 kN
– Approved tightening torque 70 Nm
– Patented
Clamping in a tight space with
three PC bolts
Recommended
Torque Wrench,
Part No. D28-10015-000
See accessory page 36
Grip groove
Hardened and
ground
Patented
PC Bolts | Short
– Ergonomic shaped bolt head with grip groove for
better handling
– Double hex for finer wrench increments
D28-06001-000
With 5 Balls
O-Rings (One-hand operation)
LENGTH | WIDTH | HEIGHT |
95 mm – – 28 – 0.01 mm
Patented
PC Bolts | Long
– Ergonomic shaped bolt head with grip groove for
better handling
– Double hex for finer wrench increments
– For clamping of two system components to a third
D28-06002-000
LENGTH | WIDTH | HEIGHT |
120 mm – – 28 – 0.01 mm
Patented
Low Profile PC Bolt | Short
– Tapered bolt head (eliminates interference)
– Only for use in bores, not slots
– Clamp with hex key SW 8 or torque wrench (see page 36)
D28-06004-000
LENGTH | WIDTH | HEIGHT |
75 mm – – 28 – 0.01 mm

Description Technical Description Part Number
Patented
Low Profile PC Bolt | Long
– Tapered bolt head (eliminates interference)
– Only for use in bores, not slots
– Clamp with hex key SW 8 or torque wrench
(see page 36)
– For clamping of two system components to a third
D28-06005-000
LENGTH | WIDTH | HEIGHT |
110 mm – – 28 – 0.01 mm
Locating Pins
– For locating system components
– Black Oxide Finish
D28-06009-000
LENGTH | WIDTH | HEIGHT |
110 mm – – 28 – 0.01 mm
Connection Bolt
Connection Bolt Short with Screw
– Use for long-term connection
– Both ends with tapered locking heads
– Only for use with system bores
– Self centering
– Clamping with SW 10 hex wrench
D28-06003-000
LENGTH | WIDTH | HEIGHT |
45 mm – – 28 mm
Connection Bolt Long with Screw
– Same functions as short connection bolt, but for
clamping two system components to a third
D28-06006-000
LENGTH | WIDTH | HEIGHT | WEIGHT
70 mm – – 28 mm
22|23
Modifications reserved!

Description Technical Description Part Number
Interface Elements D28 to D16
D16 PC Bolt
Adapter
D28 System Bore
Adapter for PC bolts D28 to D16
– Interface between D28 and D16 Systems
– Fully compatible with D28 and D16 Systems
– Self centering with O-Rings and positive force of four
balls being driven outward
– Finish ground for highest precision
– High quality, hardened material
– Integral O-Rings prevent the bolt from turning during
tightening / loosening
– O-Ring cleans the system bore
LENGTH | WIDTH | HEIGHT |
– – 30 mm 28 – 0.01 mm
D00-06010-000
Reduction Bushing D28 to D16
– Allows D16 system clamping tubes to be used in
D28 system bores
– D16 toggle clamp can be used in D28 system bores
– Serves as a support or a stop
D00-06012-000
LENGTH | WIDTH | HEIGHT |
– – 27 mm 28 / 16 mm
Thread Reducer D28 and D16 Clamping Screw
– Allows D16 system clamping screw to be used in
D28 bores
– Suits many tight fitting clamping situations
D00-06013-000
LENGTH | WIDTH | TR |
– – 12 3 mm 28 mm
System Bores D28
Reduction Plate
– Serves as interface between system parts and clamping
tubes from D28 system (e.g. swing clamps)
– Adapter for D28 to D16 System
D00-06015-000
System Bores D16
LENGTH | WIDTH | HEIGHT | WEIGHT
150 mm 50 mm 50 mm approx 1.3 kg

Description
Technical Description
Compensating Swing Clamps:
- For fast, full force and accurate clamping of various workpieces
– Fits every system bore (self locking)
– Differential compensation adjusts for the deflection of the clamping tube. Single and multiple-position workpiece clamping
– Type of operation of each swing clamp can be changed
– With interchangeable clamping pads
– Use of a clamping bridge is possible
– Height adjustment with a stop ring
– Standard clamp height max. 300 mm
– Clamping tubes in various lengths can be substituted (max. 500 mm clamping height)
Compensating Swing Clamp with Clamping Screw
Differential
compensation
The most “universal” – optimal for small lot sizes
Compensating
angle
Insert
different
length tubes
Compensating Swing Clamp 150 mm long
with Clamping Screw
Compensating Swing Clamp 200 mm long
with Clamping Screw
D28-07001-000
D28-07002-000
Clamping pad with
cruciform grooves
Reach
150 or 200 mm
Adjustable
Stop ring
LENGTH | WIDTH | HEIGHT | WEIGHT
150 – 200 mm approx 50 mm 350 mm approx 2.1 – 2.2 kg
Compensating Swing Clamp with Toggle Clamp
The most “economical”,
– Quick and full force clamping by moving the lever approximately
150°
– No interference because the lever pivots 360°
Compensating Swing Clamp 150 mm long
with Toggle Clamp
Compensating Swing Clamp 200 mm long
with Toggle Clamp
D28-07001-001
D28-07002-001
LENGTH | WIDTH | HEIGHT | WEIGHT
150 – 200 mm ca. 50 mm 350 mm approx 2.1 – 2.2 kg
Compensating Swing Clamp with Short Screw
The “smallest”
– Operated via SW 14 hex wrench or open-ended wrench
– Especially recommended for use where space is tight
Compensating Swing Clamp 150 mm long
with short screw
Compensating Swing Clamp 200 mm long
with short screw
D28-07001-002
D28-07002-002
LENGTH | WIDTH | HEIGHT | WEIGHT
150 – 200 mm approx 50 mm 350 mm approx 2.1 – 2.2 kg
24|25
Modifications reserved!

Description Technical Description Part Number
Swing Clamp 180°
– Reach is adjustable, but no differential compensation
– Can be used as horizontal swing clamp without vertical tube
– Reach of 50 – 175 mm adjustable
– Each tube can be used individually, too
220 mm
Adjustable
Patented
Swing Clamp 180° with Clamping Screw
The most “universal” – optimal for small lot sizes
Vertical Tube 220 mm long
Vertical Tube 350 mm long
D28-07005-000
D28-07005-014
220 / 350 mm
LENGTH | WIDTH | HEIGHT | WEIGHT
220 – 350 mm approx 270 mm – approx 1.8 – 1.9 kg
Adjustable
Patented
Swing Clamp 180° with Toggle Clamp
The most “economical”,
– Quick and full force clamping by moving the lever
approximately 150°
– No interference because the lever pivots 360°
Vertical Tube 220 mm long
Vertical Tube 350 mm long
D28-07005-001
D28-07005-015
LENGTH | WIDTH | HEIGHT | WEIGHT
220 – 350 mm approx 270 mm – approx 2.1 – 2.2 kg
Adjustable
Patented
Swing Clamp 180° with Short Screw
The “smallest”
– Operated with SW 14 hex wrench or open-ended wrench
– Especially recommended for use where space is tight
Vertical Tube 220 mm long
Vertical Tube 350 mm long
D28-07005-002
D28-07005-016
LENGTH | WIDTH | HEIGHT | WEIGHT
220 – 350 mm ca. 270 mm – approx 1.7 – 1.8 kg

Description Technical Description Part Number
Compensating angle
Adjustable
Swing Clamp 90°
– Orientation 90° to system bore
– Clamping stroke approximately 70 mm
– Using 180° quick acting swivel with detent,
clamping range is approximately 120 mm
– Height to approximately 170 mm
– Height adjustment with stop ring
– Use of clamping bridge is possible
D28-07008-000
LENGTH | WIDTH | HEIGHT | WEIGHT
260 mm 230 mm – approx 1.2 kg
Adjustable
220 – 350 mm
Swing Clamp 45° with Clamping Screw
The most “universal”
– Optimal for small lot sizes
– For clamping prismatic parts
Vertical Tube 220 mm long
Vertical Tube 350 mm long
D28-07009-000
D28-07009-011
LENGTH | WIDTH | HEIGHT | WEIGHT
220 – 350 mm approx 270 mm – approx 1.8 – 1.9 kg
Adjustable
Swing Clamp 45° with Toggle Clamp
The most “economical”,
– Quick and full force clamping by moving the lever
approximately 150°
– No interference because the lever pivots 360°
Vertical Tube 220 mm long
Vertical Tube 350 mm long
D28-07009-001
D28-07009-012
LENGTH | WIDTH | HEIGHT | WEIGHT
220 – 350 mm approx 270 mm – approx 2.1 – 2.2 kg
Adjustable
Swing Clamp 45° with Short Screw
The “smallest”
– Operated via SW 14 hex wrench or open-ended wrench
– Especially recommended for use where space is tight
Vertical Tube 220 mm long
Vertical Tube 350 mm long
D28-07009-002
D28-07009-013
LENGTH | WIDTH | HEIGHT | WEIGHT
220 – 350 mm approx 270 mm – approx 1.7 – 1.8 kg
26|27
Modifications reserved!

Description Technical Description Part Number
Screw with Bushing and Clamping Pad
The most “universal”
– Optimal for small lot sizes
– Fits directly into system bores
– Ideal also for pre-loading workpieces
D28-07020-000
LENGTH | WIDTH | HEIGHT | WEIGHT
approx 251 mm – – approx 0.8 kg
Toggle Clamp with Clamping Pad
The most “economical”,
– Quick and full force clamping by moving the lever
approximately 150°
– No interference because the lever pivots 360°
– Fits directly into system bores
– Ideal also for pre-loading workpieces
D28-07021-000
LENGTH | WIDTH | HEIGHT | WEIGHT
approx 230 mm – – approx 0.7 kg
Short Screw with Bushing and Clamping Pad
The “smallest”
– Operated via SW 14 hex wrench or open-ended wrench
– Especially recommended for use where space is tight
– Fits directly into system bores
– Ideal also for pre-loading workpieces
D28-07022-000
LENGTH | WIDTH | HEIGHT | WEIGHT
approx 120 mm – – approx 0.3 kg
Stop Ring “VARIO“
– Fits all clamping tubes
– For setting the height of swing clamps
– Included on each swing clamp
LENGTH | WIDTH | HEIGHT |
– – 10 mm 28 mm
D28-07003-000
Clamping Tube
– Fits all system bores
– Precision tube
200 mm long
350 mm long
600 mm long
D28-07004-000
D28-07004-001
D28-07004-002
LENGTH | WIDTH | HEIGHT |
s. o. – – 28 mm
Clamping Tube: Cut-to-length
– Fits all system bores
– Precision tube
LENGTH | WIDTH | HEIGHT |
1000 mm – 45 mm 28 mm
D28-07004-003

Darstellung Bezeichnung Bestellnummer
Clamping Tube
D28-07010-000
Clamping Tube
Extension Sleeve
Clamping Tube
– Used as a connector between two clamping tubes
– Black Oxide Finish
LENGTH | WIDTH | HEIGHT |
100 mm – – 28 / 34 mm
Adapter tube L100 | L 200 | L 300
– Extension of the support and clamping points
– Adustable using the tube of a swing clamp
– Clamping using a PC bolt is possible
Length: 100 mm
Length: 200 mm
Length: 300 mm
D28-09010-000
D28-09010-001
D28-09010-002
LENGTH | WIDTH | HEIGHT |
s.o. – – 28 /40 mm
Multi-Clamping and Support Tower
Height
System Bore
100 mm
System Bore
– Base element for three dimensional clamping and locating
– Can be used with other system components
– Fastened to the table with 2 PC bolts
– Very stable design
– Black Oxide Finish
Height: 200 mm
Height: 350 mm
Height: 700 mm
Height: 1000 mm
LENGTH | WIDTH | HEIGHT |
150 mm 100 mm s. o. 55 mm
D28-05004-003
D28-05004-000
D28-05005-000
D28-05006-000
Compensating Clamping Arm with Hex Head Screw
D28-05007-000
– Differential compensation
– Only used with the multi-clamping and support tower
– Clamping force approximately 20 kN
– Very heavy design
– Suitable for clamping of heavy workpieces.
– Fast and secure clamping with a wide height range
– Powder coated
LENGTH | WIDTH | HEIGHT |BORE DIAMETER-
230 mm – 119 mm 55 mm
28|29
Modifications reserved

Description Technical Description Part Number
Magnetic Clamps
– Self-locking clamping plugs with integral permanent magnets fit into all system bores
– Applicable with or without compressed air
– Optimal clamping and positioning of workpieces using the least amount of space
– Acts as an air bearing for large plates
Magnet Clamp Set with Manifold Block
Includes
– Manifold block with hand valve setup for 10 clamping
magnets
– Includes 10 Magnetic Clamps D28
– Includes compressed air connection
– Comes with 20 m air hose
– Special wrench
D28-13001-000
Manifold Block with Hand Valve
– Connecting the Magnetic Clamps to the hose
D00-10013-000
Magnet Clamp D28
– Holding force 70 N
D28-13001-001
Special Hex Wrench
– To ease the removal of the Magnetic Clamp from the
system bores
D28-10008-002
Air Hose PA 64 1 Blue from 1 – 50 m
On Request

Description Technical Description Part Number
Chain Clamp
– No deformation of the workpiece because the clamping force is equally distributed.
– Simple, fast clamping and unclamping by left / right turning of the clamp lock.
– Force actuation is integrated with the PC Bolts by screwing in a ball joint.
Complete Chain Clamp Set D28
D28-12001-000
Equal force distribution
Components are not braced
Point contact force
Component will deform
Suitable for equal and
unequal point clamping
Includes
2 PC Bolts, M16 Tapped Bore
1 Connection Bolt M16 Tapped Bore
1 Ball joint with chain link connection
1 Ball joint with clamp hooks and fast adjusting Clamping
Screw with left / right threads
1 Box wrench, Size SW 10
3 Clamping chains in lengths: 1 m, 2 m and 3 m
2 Chain links
30|31
Modifications reserved

Description Technical Description Part Number
Clamping Pads with Cruciform Grooves
Steel Black Oxide Finish
D28-07011-000
Stainless Steel
D28-07011-001
Polyamide
D28-07011-002
– Quickly and easily changed without tools or threads
– O-Ring prevents entry of dirt in the ball joint
– Available in various materials
– Pivoting compensation allows full surface contact with the part
– Cruciform grooves for clamping of round/ rectangular tubes
Steel, Black Oxide Finish
Stainless Steel
Polyamide
D28-07011-000
D28-07011-001
D28-07011-002
LENGTH | WIDTH | HEIGHT |
– – 25 mm 40 mm
Clamping Pads steel / double-sided
D28-07011-010
– Can be used from both sides
LENGTH | WIDTH | HEIGHT |
– – 25 mm 40 mm
Clamping Pad with Ball Form
Steel Black Oxide Finish
D28-07011-004
Stainless Steel
D28-07011-005
Polyamide
D28-07011-006
– Quickly and easily changed without tools or threads
– O-Ring prevents entry of dirt in the ball joint
– Available in various materials
– The ball is particularly useful in clamping corner profiles
– The clamping pad adjusts for angular error
– Pivoting compensation allows full surface contact with the part
Steel, Black Oxide Finish / Ball Form
Stainless Steel / Ball Form
Polyamide / Ball Form
LENGTH | WIDTH | HEIGHT |
– – 18 mm 35 mm
D28-07011-004
D28-07011-005
D28-07011-006
Clamping Pad Blank
D28-07014-000
Steel / blank
– For customer specific machining
LENGTH | WIDTH | HEIGHT |
– – 35 mm 50 mm
Locating Disk
– Use as a stop or a support
– Connects with PC Bolts or Connection Bolts
– Infinitely adjustable by rotating
25 – 50 mm
25 – 75 mm
D28-05013-000
D28-05013-001
LENGTH | WIDTH | HEIGHT |
– – 25 mm 75 / 100 mm

Description Technical Description Part Number
Clamping Bridge
– Multiple simultaneous clamping points
– Clamp difficult to reach places
– Simultaneous clamping of multiple parts
– Clamping uneven surfaces with pivoting compensation
– Adjustable spacing of the clamping pads using self-locking ball pins
– Clamping pads are changeable
– Plugs into every clamping Screw ball end
– Very stable and compliant design
Clamping screw ball
(e.g. Swing Clamp clamping screw)
2P-Clamping Bridge
– Two clamping points
– Shipped with: Clamping bridge, 2 ball points and
2 clamping pads (Steel)
– Powder coated
D28-07018-000
Changeable
clamping pad
Clamping pad
transferable
LENGTH | WIDTH | HEIGHT |
170 mm 35 mm 35 mm 170 mm
Hardened
Ball Pin
– Connecting element between clamping bridge, indexable
bushings and clamping pad
– Integration with other components possible
D28-07015-000
LENGTH | WIDTH | HEIGHT |
– – – 10 15 mm
32|33
Modifications reserved!

Description Technical Description Part Number
Clamping Sleeves 90° and 45°
Used to establish bores for clamping components or tubes 45° or 90° to the base. The sleeves can be fastened with PC bolts or connection bolts
in any system bore
Clamping Sleeve 90°
– Can be used as a corner stop
D28-07034-000
LENGTH | WIDTH | BORE | CENTER DISTANCE
90 mm 55 mm 28 mm 50 mm*
* ^=
System Grid
Clamping Sleeve 45°
D28-07035-000
LENGTH | WIDTH | BORE | WEIGHT
90 mm 50 mm 28 mm –

Description Technical Description Part Number
Toggle Clamps
– For Fast clamping and fastening with lighter clamping force
– For Production runs (short clamping times)
– Fits in all system bores
– On request pneumatic / hydraulic clamping components available
– Black Oxide Finish
Adjustable
Vertical Toggle Clamp
– Clamping range 0 – 50 mm
– With Adapter and tapered locking screw
– For direct mounting or infinitely adjustable using a universal
stop
D28-08001-000
Tapered locking screw
LENGTH | WIDTH | HEIGHT | WEIGHT
200 mm 150 mm 50 mm approx 0.6 kg
Tapered locking screw
Horizontal Toggle Clamp
– 30 mm stroke
– With Adapter and tapered locking screw
– For direct mounting or infinitely adjustable using a universal
stop
D28-08002-000
LENGTH | WIDTH | HEIGHT | WEIGHT
200 mm 100 mm 50 mm approx 0.7 kg
Tapered locking screw
Adapter for Toggle Clamps
– Suitable for all commercial toggle clamps
– Shipped with adapter, 4 hex head screws and 1 tapered
locking screw
D28-08005-000
LENGTH | SCREWS | | HOLE SPACING
– M 6 40 28 mm 33 19 mm
Adjustable
Speed Clamp
– Mounts to tube, infinitely adjustable 50 – 300 mm height
– With a flange and tapered locking screw for direct
mounting to any system bore
– Infinitely adjustable with universal stop
D28-08003-000
Tapered locking screw
LENGTH | WIDTH | HEIGHT | WEIGHT
350 mm 150 mm 50 mm approx 1.8 kg
34|35
Modifications reserved!

Description Technical Description Part Number
Accessories
System D28
System D16
Transport Ring D16 and D28
– For fast, simple and safe transport of all heavy system
components (e.g. table)
– Attaches using 2 PC bolts
– Powder coated
– Dekra tested!
LENGTH | WIDTH | HEIGHT | WEIGHT
200 mm 100 mm 150 mm approx 4.6 kg
D00-10001-000
Quick conversion
Torque Wrench
– Preset to 70 Nm for controlled tightening of PC bolts
Eliminates over-tightening and damage to system bores
– Includes 2 sockets
D28-10015-000
LENGTH | WIDTH | HEIGHT | WEIGHT
320 mm 1
⁄2 inch 1
⁄2 inch 0.7 kg
Ball end
Ball End Hex Wrench
– For PC bolts and compensating clamping arm with
hex head screw
– Good accessibility with the ball end
LENGTH | WIDTH | HEIGHT |
150 mm – – SW 14
D28-10008-000
Round Brush 28 mm
– For cleaning the system bores
– With safety shield
D28-10002-000
System Bores
System D16
System D28
Quick disconnect
Ground Connector D16 and D28
– Fits in any system bore
– 100 % contact, no overheating of the ground
cable k higher efficiency
– For cable cross section of 50 – 70 mm 2
– For loads up to 500 A
– Simple and safe assembly (without interference)
– Compatible with standard ground cables
D28-10009-000
Extraction Tool
– Suitable for System D28 and D16 PC Bolts
– For the simple extraction of PC Bolts
– Handle serves to align component bores
D00-10016-001

Description Technical Description Part Number
Complete Table Leg
D00-10010-000
650 ± 30 mm
Powder coated
Fine adjustable
pivoting feet
Tubular sleeve
– As supporting leg for a U-Form Spacer Block
D28-04002-XXX 1 m and longer
– Custom length on request!
– Fine adjustment 30 mm
Complete Telescoping Leg.
D00-10010-001
550 – 900 ±30 mm
With thread
infinitely adjustable
Range of adjustment 350 mm
– For flexible height adjustment of the work tables
– Custom lengths on request!
– Increments 50 mm apart
– Fine adjustment 30 mm
Complete Table Leg with Wheel
650 ± 30 mm
– Capacity max. 650 kg
– Custom lengths on request!
– Fine Adjustment 30 mm
With caster and brake
With caster
D00-10010-002
D00-10010-007
650 ± 30 mm
Screws
Complete Table Leg with Anchoring Pad
– For anchoring the work table to the floor to prevent movement
during use (e.g. when using robots)
– Includes anchoring screw and insert
– Custom lengths on request!
– Fine adjustment 30 mm
D00-10010-003
Anchoring inserts
36|37
Modifications reserved!

Description Technical Description Part Number
Bench Stone
– For maintaining system surfaces
D00-10007-000
Pump Bottle
– Pressurized container, sturdy design
Capacity: 1 Liter (without anti-spatter spray)
Pump Bottle with 1 Liter Anti-Spatter Spray
– Pressurized container, sturdy design
Capacity: 1 Liter Anti-Spatter Spray
D00-10004-000
D00-10005-000
Note: Cannot be diluted with water!
Öko Anti-Spatter Spray
– Builds a protective film against spatter and dirt
Capacity: 5 Litre Öko Anti-Spatter Spray
D00-10006-000
Note: Cannot be diluted with water!
Accessory Cart
– Keeps everything easy to find and organized
– Low center of gravity
– Accommodates system components
– The rear side has storage for 9 clamping and
locating angles
D28-11001-000
LENGTH | WIDTH | HEIGHT |
1000 mm 650 mm 1050 mm –
Compact Accessory Cart
– Keeps the workplace organized and parts easy to find
– Saves space by storing under the 3D-Work Table
– Cart can be secured under the table
– Tools can be protected against dirt
D28-11001-002
LENGTH | WIDTH | HEIGHT |
1000 mm 720 mm 600 mm –

Order and Information Form D28
Fast and simple; copy and fax to:
5 08335/9859-27
Send to us.
iOr by mail: Page is prepared for sending with
DIN C6 window envelope
To
DEMMELER
Maschinenbau GmbH
Alpenstraße 10
D-87751 Heimertingen (Germany)
Customer / Prospect
Contact Person
Street
Postal Code / City
Country
Telephone /
Fax /
email
❏ Order
Dear Sir / Madam
❏ We order the following components
from your product line
@
❏ Request for Quote
❏ Please tell us about the following
items from your product line
❏ Please call us at the following
telephone number:
|
––7 FOLD HERE
|
❏ We are interested in discussing our
applications in more detail
Date
Signature
Quantity Order No. Article

Mehrfach ausgezeichnet
Refer to our brochures:
Innovative technology improved
Werkzeugarena
Werkzeugwechselsystem
Werkzeugarena 3.0
3D Workand
Welding Table
System D16 / D28
Standard Part List
Demmeler Maschinenbau
GmbH & Co. KG
Basic components
for machine tools.
Composite material
DemTec ®
Demmeler Maschinenbau
GmbH & Co. KG
Rotary tables
Demmeler
Automatisierung &
Roboter GmbH
Tool change systems
Toolarena
Tooltower
Demmeler
Automatisierung &
Roboter GmbH
DEMMELER
Maschinenbau GmbH & Co. KG
Alpenstraße 10 / Postfach 51
87751 Heimertingen / Germany
Fon: +49 (0) 83 35 / 98 59 - 0
Fax: +49 (0) 83 35 / 98 59 - 27
Mail: info@demmeler.com
Internet: www.demmeler.com