DSOF-80000 Series - Sloan Valve Company
DSOF-80000 Series - Sloan Valve Company
DSOF-80000 Series - Sloan Valve Company
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
LAVATORY SYSTEM ROUGH-IN THREE STATION<br />
DSG-83000 Designer <strong>Series</strong> Gradient<br />
Triple Station Solid Surface Lavatory System<br />
2 ½”<br />
(63 mm)<br />
22”<br />
(558 mm)<br />
4”<br />
(101 mm)<br />
1 ¹/8”<br />
(28 mm)<br />
82”<br />
(2082 mm)<br />
90”<br />
(2286 mm)<br />
DSCT-83000 Designer <strong>Series</strong> Counter Top<br />
Triple Station Solid Surface Lavatory System<br />
15”<br />
(381 mm)<br />
30”<br />
(762 mm)<br />
TOOLS REQUIRED FOR INSTALLATION<br />
• Electric drill for drilling anchor holes.<br />
• Socket or open end wrench for installing anchoring fasteners.<br />
• Adhesive Caulk for vanity or bracket mounting<br />
• Adhesive for Lavatory optional mounting<br />
SINK LOCATION<br />
30”<br />
(762 mm)<br />
6<br />
15”<br />
(381 mm)<br />
5”<br />
(127 mm)<br />
6 ¼”<br />
(158 mm)<br />
4”<br />
(101 mm)<br />
4”<br />
(101 mm)<br />
5”<br />
(127 mm)<br />
34”<br />
(863 mm)<br />
4”<br />
(101 mm)<br />
4”<br />
(101 mm)<br />
34”<br />
(864 mm)<br />
22”<br />
(558 mm)<br />
ADA AD<br />
• Open end wrench for connecting water lines.<br />
• Pipe wrench for installing drain lines.<br />
5”<br />
(127 mm)<br />
Water Supply<br />
ADA 20”<br />
(508mm)<br />
ADA AD ADA<br />
24”<br />
(610 mm)<br />
Determine the appropriate wall location for the Lavatory System. Consider that hot and cold water supply lines, a drain line, and an electrical source (receptacle for<br />
hardwired faucets) will be required. Compare the physical dimensions of the Lavatory System to the space available for the installation. If wall is not load bearing, a<br />
carrier may be required behind the wall. Refer to the appropriate Rough-in diagram on pages 2 – 6 for Lavatory System dimensions.<br />
Prior to Lavatory System installation, electric wiring, water supply and drain must be installed.<br />
1– STRAINER INSTALLATION<br />
A<br />
B<br />
Insert Strainer into Basin using plumbers putty (supplied by installer).<br />
From beneath Basin, install the Rubber Gasket, Cardboard Seat and<br />
Drain Nut onto Strainer. Secure Drain Nut against Basin.<br />
RUBBER GASKET<br />
CARDBOARD SEAT<br />
DRAIN NUT<br />
STRAINER<br />
11 ¾”<br />
(298 mm)