Download now - Watson-Marlow

ATEXEU Directive 94/9/EC, commonly known as the ATEX directive, carries obligations to the personwho places equipment on the market in EU territory for use in potentially explosive environments.All of Watson-Marlow’s ATEX pumps have been rated as Group II, Category 2 equipment, intendedfor use in gas-based environments only. ATEX pumps are available in 521, 621 and 701 ranges.501DF/RLA• Flow rates to 1800 ml/min• Fixed speed: 62 rpm, 223 rpm or 281 rpm• ATEX II 2G (Zone 1) 0.18kW 3-phase 50Hzindustrial drive• 501RLA pumphead: pressures to 2 bar, (1 bar with 6.4mm and8.0mm tubing) 1.6mm wall continuous tubing in seven bore sizes• IP55 protection501DF/RL2A• 501RL2A pumphead: for higher pressuresusing STA-PURE PCS. 2.4mm walltubing in six bore sizes for enhancedpumping performancecontinuous501DV/RL2A• Flow rates from 0.29 ml/min to 1600 ml/min• Variable speed ball drive variator: 7 rpm – 250 rpm• ATEX II 2G (Zone 1) 0.25kW 230/400V 3-phase 50Hz industrial drive• 501RL2A pumphead: for higher pressures using STA-PURE PCS orSTA-PURE PFL. 2.4mm wall continuous tubing in six bore sizes forenhanced pumping performance• IP55 protection501RLA and 501RL2A pumpheads: maximum flow rates, ATEX pumps, ml/minTube bore (mm)rpm 0.5 0.8 1.6 3.2 4.8 6.4 8.062 2.6 7.6 26 120 250 390 620223 9.3 27 95 410 900 1400 2230250 10 31 110 470 1000 1600 2500281 12 34 120 520 1100 1800 2810621DF/RA and621DF/REA• Flow rates from to 18 litre/min• Fixed speed: 77 rpm or 251 rpm• ATEX II 2G 0.37kW 3-phase 50Hzindustrial motor/gearbox• Pressures to 2 bar• 621DF/RA twin-roller pumps for continuous tubing• 621DF/REA twin-roller pumps for LoadSure elements• For pressures to 4 bar, use a 621REA pumphead with aMarprene or STA-PURE PCS element, or a 620RApumphead with STA-PURE PCS tubing621DF/RE4A• Four rollers for reduced pulsation• IP55 protection621DV/RA• Flow rates from 0.5 litre/min to 18 litre/min• Variable speed ball drive variator: 7 rpm – 250 rpm• ATEX II 2G (Zone 1) 0.25kW 6-pole 230/400V3-phase 50Hz TEFC electric motor• Pressures to 2 bar, 3.2mm wall continuous tubing infour bore sizes• IP55 protection, 24 hour duty rated• Two year full warranty621DV/REA• Pressures to 4 bar, LoadSure tubing elements in two bore sizes620 pumpheads: maximum flow rates, ATEX pumps, litre/minrpm 620R (continuous 620RE 620RE4tubing, two rollers) (LoadSure (LoadSure elements, elements,two rollers) four rollers)Tube or elementbore (mm) 6.4 9.6 12.7 15.9 12.0 17.0 12.0 17.0Marprene TL 77 1.0 1.9 3.1 4.2 2.8 5.2 2.4 3.6251 3.3 6.3 10 11 9.3 17 7.9 12LoadSure elements – – – – – – – – –Marprene TM 77 – – – – 2.8 4.5 2.4 3.2251 – – – – 9.3 15 7.9 10LoadSure elements – – – – – – – – –Pumpsil, Neoprene 77 0.92 2.1 3.2 4.7 3.0 4.7 2.5 3.3STA-PURE PCS 251 3.0 6.8 11 14 9.7 15 8.3 11STA-PURE PFL 77 0.92 1.9 3.1 4.7 3.1 5.6 2.6 3.9251 3.0 6.3 10 15 10 18 8.5 13Marprene TL 250 3.3 6.3 10 11 9.3 17 7.9 12701DFB/RA• Flow rates to 2,000 litre/hour• Fixed speed: 112 rpm or 360 rpm• Three-phase ATEX II 2G (Zone 1) motor• Continuous tubing in five sizes and six materials701DFB/REA• As 701DFB/RA• LoadSure tubing elements in four sizes and five materials701DFB/RA/RXA and 701DFB/REA/REXA• As 701DFB/RA• Extension pumpheads for 701DFB drive to double the flow rates701DVB/R and 701DVB/RE• LoadSure tubing elements in four sizesand five materials• Variable speed ball variator: 7-350 rpm720 pumpheads: flow ranges, ATEX pumps, litre/hrrpm 701R continuous tubing 701RE LoadSure elements9.6mm 12.7mm 15.9mm 19mm 25.4mm 12.7mm 15.9mm 19mm 25.4mm112 130 240 340 470 620 240 340 470 820360 420 780 1100 1500 2000 780 1000 1500 20005