29.11.2012 Views

TECHNICAL MANUAL - Tyrolia

TECHNICAL MANUAL - Tyrolia

TECHNICAL MANUAL - Tyrolia

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Then you can place the front and the rear part over the<br />

screws and push it in the appropriate position. Take care<br />

that the washer stays in its position.<br />

pict 59<br />

To fix the plate, just tighten the screws.<br />

pict 60<br />

5. MOUNTING - BINDING<br />

Presently the RACEPLATE RDX is designed for FREEFLEX<br />

PRO bindings. We can guarantee the right pullout strength<br />

only for these models. Mount the binding in accordance with<br />

the procedures in this manual with following exceptions.<br />

pict 6 1<br />

Use a 4.1 Ø x 9.0 mm drill bit for the toe holes and the front<br />

heel holes. For the rear heel holes use a 4.1 Ø x 7.0 mm<br />

drill bit.<br />

pict 62<br />

Change the standard rear heel screws according to the<br />

mounted binding!!! The screws come in a separate box<br />

with the RACEPLATE RDX!<br />

pict 63<br />

pict 64<br />

Beside those two points the mounting is similar as described<br />

in this manual!<br />

pict 65<br />

MOUNTING / 37

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!