Technical Reference Manual - Emtek

2008 dimension 6/19/09 4:06 PM Page 12008TechnicalReferenceManualAn ASSA ABLOY Group brand

2008 dimension 6/19/09 4:06 PM Page 5BRASS MORTISE ENTRANCE HANDLESETS2 3 ⁄4”17 5 ⁄8”2 3 ⁄4”3 5 ⁄16”10 5 ⁄16”10 5 ⁄16”3 5 ⁄16”3 15 ⁄16”4 1 ⁄8”17 1 ⁄4”3”2 1 ⁄2”2 3 ⁄4”1 1 ⁄2”4 3 ⁄4”10”3 9 ⁄16”3 3 ⁄4”2 1 ⁄4”1 7 ⁄16”Standard interior trimPart #33422 1 ⁄4”Standard interior trimPart #3310Oval Ribbon & Reed Mortise TrimPart #3342Additional Dimensions: ( Part # 3342 )• Exterior Projection is 2 3 ⁄4”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 3 ⁄8”• Clearance between door & grip is 1 9 ⁄16”• Plates thickness: 1 ⁄2”Mills TrimPart #3310Additional Dimensions: ( Part # 3310 )• Exterior Projection is 2 5 ⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1”• Clearance between door & grip is 1 3 ⁄8”• Plates thickness: 1 ⁄2”* Lever By Lever/Knob By Knob Mortise Entrance Handlesets• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesetsDoor Thickness Specifications:• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1 ⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2 1 ⁄4” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• Same dimensions for dummy function5EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:06 PM Page 6BRASS MORTISE ENTRANCE HANDLESETS2 3 ⁄4”2 5 ⁄8”2 3 ⁄8”3 9 ⁄16”2 3 ⁄4”10”10”17 1 ⁄4”18 1 ⁄2”3 3 ⁄4”2 1 ⁄4”2 1 ⁄4”3”Standard interior trimPart # 3306/3305Manhattan Trim StylePart # 3306Melrose Mortise Trim StylePart # 3305Additional Dimensions: ( Part # 3306 & 3305 )• Exterior Projection is 2 5 ⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1”• Clearance between door & grip is 1 3 ⁄8”• Plates thickness: 1 ⁄2”* Lever By Lever/Knob By Knob Mortise Entrance Handlesets• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesetsDoor Thickness Specifications:• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1 ⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2 1 ⁄4” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• Same dimensions for dummy functionEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-28126

2008 dimension 6/19/09 4:06 PM Page 7BRASS MORTISE ENTRANCE HANDLESETS3 1 ⁄8”3 1 ⁄8”3”3”12 3 ⁄16”3”4 7 ⁄8”17 5 ⁄8”20 1 ⁄2”12 3 ⁄16”5 1 ⁄16”1 7 ⁄16”Standard interior trimPart # 3307/3309Regency Trim StylePart # 3307Versailles Trim StylePart # 3309Additional Dimensions: ( Part # 3307 & 3309 )• Exterior Projection is 2 3 ⁄4”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 3 ⁄8”• Clearance between door & grip is 1 9 ⁄16”• Plates thickness: 1 ⁄2”* Lever By Lever/Knob By Knob Mortise Entrance Handlesets• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesetsDoor Thickness Specifications:• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1 ⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2 1 ⁄4” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• Same dimensions for dummy function7EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:06 PM Page 9BRASS MORTISE ENTRANCE HANDLESETS2 1 ⁄8”2 13 ⁄16”2 13 ⁄16”9 3 ⁄4”9 3 ⁄4”3 5 ⁄16”19”4 3 ⁄16”3”2 1 ⁄8”Standard interior trimPart # 3343Charleston Trim StylePart # 3343Additional Dimensions: ( Part # 3343 )• Exterior Projection is 2 3 ⁄4”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 1 ⁄4”• Clearance between door & grip is 2”• Plates thickness: 1 ⁄2”* Lever By Lever/Knob By Knob Mortise Entrance Handlesets• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesetsDoor Thickness Specifications:• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1 ⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2 1 ⁄4” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• Same dimensions for dummy function9EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:06 PM Page 10WROUGHT STEEL MORTISE ENTRANCE HANDLESETSSteel Sectional Mortise2 5 ⁄16”1 3 ⁄4”2 1 ⁄2”3 1 ⁄2”3 5 ⁄8”9 5 ⁄8”17”2 9 ⁄16”4 3 ⁄8”3 3 ⁄4”3”1 3 ⁄4”Lafayette GripPart # 33142 1 ⁄8”San Carlos GripPart # 33151 3 ⁄4”Normandy GripPart # 3316Additional Dimensions: (Part # 3315)• Exterior Projection is 3 1 ⁄2”• Interior Projection Depends on Handle Style• Overall Grip thickness: 3 ⁄4”• Clearance between door & grip is 2”• Plates thickness: 1 ⁄2”Standard interior trimPart # 3314/3315/3316Additional Dimensions: (Part # 3314)• Exterior Projection is 3 1 ⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 1 ⁄2”• Clearance between door & grip is 1 1 ⁄4”• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 3316)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1”• Clearance between door & grip is 1 5 ⁄8”• Plates thickness: 1 ⁄2”* Lever By Lever/Knob By Knob Mortise Entrance Handlesets• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesetsDoor Thickness Specifications:• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1 ⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2 1 ⁄4” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• Same dimensions for dummy functionEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281210

2008 dimension 6/19/09 4:06 PM Page 11WROUGHT STEEL MORTISE ENTRANCE HANDLESETSSteel Monolithic Mortise2 5 ⁄16”2 1 ⁄16”3 5 ⁄8”2 5 ⁄16”9 5 ⁄8”9 5 ⁄8”17”3 3 ⁄4”3”1 3 ⁄4”Lafayette GripPart # 33111 3 ⁄4”2 1 ⁄8”San Carlos Grip Normandy GripPart # 3312Part # 3313Additional Dimensions: (Part # 3312)• Exterior Projection is 3 1 ⁄2”• Interior Projection Depends on Handle Style• Overall Grip thickness: 3 ⁄4”• Clearance between door & grip is 2”• Plates thickness: 1 ⁄2”Standard interior trimPart # 3308Additional Dimensions: (Part # 3311)• Exterior Projection is 3 1 ⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 1 ⁄2”• Clearance between door & grip is 1 1 ⁄4”• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 3313)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1”• Clearance between door & grip is 1 5 ⁄8”• Plates thickness: 1 ⁄2”* Lever By Lever/Knob By Knob Mortise Entrance Handlesets• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesetsDoor Thickness Specifications:• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1 ⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2 1 ⁄4” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate11• Same dimensions for dummy functionEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 12BRONZE MORTISE ENTRANCE HANDLESETS1 3 ⁄4”2 7 ⁄16”3 1 ⁄2”2 1 ⁄8”2 3 ⁄4”2 13 ⁄16”3 1 ⁄2”16 1 ⁄4”2 3 ⁄4”4 1 ⁄2”16 1 ⁄4”2 3 ⁄4”9 1 ⁄2”3”9 1 ⁄2”3 5 ⁄8”19 5 ⁄16”3”3”2 1 ⁄8”2 1 ⁄8”Standard interior trimPart # 3321/3322/3323Denver Mortise EntrysetPart # 3323Cheyenne EntrysetPart # 3321Topeka EntrysetPart # 3322Additional Dimensions: (Part # 3323)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1”• Clearance between door & grip is 1 1 ⁄2”• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 3321& 3322)• Exterior Projection is 3 1 ⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 3 ⁄4”• Clearance between door & grip is 1 3 ⁄4”• Plates thickness: 1 ⁄2”* Lever By Lever/Knob By Knob Mortise Entrance Handlesets• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesetsDoor Thickness Specifications:• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1 ⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2 1 ⁄4” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• Same dimensions for dummy functionEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281212

2008 dimension 6/19/09 4:07 PM Page 13BRONZE MORTISE ENTRANCE HANDLESETS1 1 ⁄2”2 1 ⁄4”2 1 ⁄4”16 1 ⁄4”2 3 ⁄8”2 13 ⁄16”3”4 3 ⁄4”16 1 ⁄4”2 13 ⁄16”10”19”2 13 ⁄16”10”2 13 ⁄16”3 7 ⁄16”4 5 ⁄16”3”3”2 3 ⁄16”2 1 ⁄8”Rectangular Sectional MortisePart # 3324Rectangular Monolithic MortisePart # 3325Rectangular Full Length MortisePart # 3326Standard interior trimPart # 3324/3325/3326Additional Dimensions: (Part # 3324, 3325 & 3326)• Exterior Projection is 3 1 ⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 3 ⁄4”• Clearance between door & grip is 1 3 ⁄4”• Plates thickness: 1 ⁄2”* Lever By Lever/Knob By Knob Mortise Entrance Handlesets• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesetsDoor Thickness Specifications:• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1 ⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2 1 ⁄4” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• Same dimensions for dummy function13EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 14BRONZE MORTISE ENTRANCE HANDLESETS2 13 ⁄16”2 13 ⁄16”2 1 ⁄4”2 1 ⁄4”2 13 ⁄16”10”3 7 ⁄16”16 1 ⁄4”10”19”4 5 ⁄16”3”2 3 ⁄16”Standard interior trimPart # 3327/3328Morgan EntrysetPart # 3327Rockford EntrysetPart # 3328Additional Dimensions: (Part # 3327 & 3328)• Exterior Projection is 3 1 ⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 3 ⁄4”• Clearance between door & grip is 1 3 ⁄4”• Plates thickness: 1 ⁄2”* Lever By Lever/Knob By Knob Mortise Entrance Handlesets• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesetsDoor Thickness Specifications:• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1 ⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2 1 ⁄4” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• Same dimensions for dummy functionEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281214

2008 dimension 6/19/09 4:07 PM Page 15LOST WAX CAST BRONZE MORTISE ENTRANCE HANDLESETS3”18 1 ⁄2”1 13 ⁄16”2 1 ⁄2”3”3 5 ⁄8”4 1 ⁄2”18 1 ⁄2”2 1 ⁄4”3”10”10”3 7 ⁄16”4 7 ⁄16”3”3”Standard interior trimPart # 3331/33341 13 ⁄16”1 13 ⁄16”Naples Mortise EntrysetPart # 3334Da Vinci EntrysetPart # 3331Additional Dimensions: (Part # 3334, 3331)• Exterior Projection is 3 9 ⁄32”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 9 ⁄16”• Clearance between door & grip is 1 7 ⁄8”• Plates thickness: 11 ⁄16”* Lever By Lever/Knob By Knob Mortise Entrance Handlesets• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesetsDoor Thickness Specifications:• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1 ⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2 1 ⁄4” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• Same dimensions for dummy function15EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 16LOST WAX CAST BRONZE MORTISE ENTRANCE HANDLESETS3”2 11 ⁄16”3 7 ⁄8”3”10 1 ⁄2”10”4 3 ⁄8”17 1 ⁄2”1 1 ⁄2”Standard interior trimPart # 3333Octagon Mortise EntrysetPart # 3333Additional Dimensions: (Part # 3333)• Exterior Projection is 3 1 ⁄16”• Interior Projection Depends on Handle Style• Overall Grip thickness: 2 1 ⁄8”• Clearance between door & grip is 1 9 ⁄16”• Plates thickness: 1 ⁄2”* Lever By Lever/Knob By Knob Mortise Entrance Handlesets• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesetsDoor Thickness Specifications:• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1 ⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2 1 ⁄4” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• Same dimensions for dummy functionEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281216

2008 dimension 6/19/09 4:07 PM Page 17LOST WAX CAST BRONZE MORTISE ENTRANCE HANDLESETS2 7 ⁄8”3”3 5 ⁄8”3”11”11”18”3 7 ⁄8”2 1 ⁄2”2”Standard interior trimPart # 3332Art Nouveau Mortise EntrysetLeft Hand GripPart # 3332Additional Dimensions: (Part # 3332)• Exterior Projection is 3 1 ⁄16”• Interior Projection Depends on Handle Style• Overall Grip thickness: 2 1 ⁄8”• Clearance between door & grip is 1 9 ⁄16”• Plates thickness: 1 ⁄2”* Lever By Lever/Knob By Knob Mortise Entrance Handlesets• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesetsDoor Thickness Specifications:• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1 ⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• 1 3 ⁄4” Threaded Cylinder• 2 1 ⁄4” Long Spindle• 2 1 ⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate17• Same dimensions for dummy functionEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 18STRIKEPLATES FOR MORTISE LOCKS5 ⁄8” 5 ⁄8”1 1 ⁄4”4 27 ⁄32”4 1 ⁄8”4 7 ⁄8” 4 1 ⁄8”4 7 ⁄8”4 1 ⁄8”4 7 ⁄8”4 1 ⁄8”3 3 ⁄8”3 ⁄4”1 7 ⁄32”Steel Understrikeplate1 1 ⁄4”Mortise Full-Lip StrikeplatePart # 861471 1 ⁄4”Flat StrikeplatePart # 861481 1 ⁄4”Extended StrikeplatePart # 86149Mortise CylinderEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281218

2008 dimension 6/19/09 4:07 PM Page 19Part # 3300 & 380019

2008 dimension 6/19/09 4:07 PM Page 2020




2008 dimension 6/19/09 4:07 PM Page 24BORING SPECIFICATIONSFor Reference Only24

2008 dimension 6/19/09 4:07 PM Page 25BORING SPECIFICATIONS25For Reference Only

2008 dimension 6/19/09 4:07 PM Page 26BORING SPECIFICATIONS(Dummy)For Reference Only26

2008 dimension 6/19/09 4:07 PM Page 27BORING SPECIFICATIONS(Dummy)27For Reference Only





2008 dimension 6/19/09 4:07 PM Page 32BRASS KEY IN KNOB AND LEVER SETSIncludes Latch and Strike Plate2 11 ⁄16” Projection2 11 ⁄16” Projection2 5 ⁄16” Diameter2 11 ⁄16”Providence Knob (P)Egg Knob (E)1 5 ⁄8”• Space between rosette and knob isapprox. 1”2 5 ⁄8” Projection2 5 ⁄8” Projection2 5 ⁄16” DiameterWaverly Knob (W)• Space between rosette and knob isapprox. 1”Rope Knob (RK)• Space between rosette and knob isapprox. 1”2 3 ⁄8” Diameter2 1 ⁄8” Gap4 3 ⁄4” W1 5 ⁄8” Gap1 3 ⁄4” W2 7 ⁄8” Projection2 11 ⁄16” ProjectionCortina Lever (C)4 3 ⁄4” WRope Lever (RL)4 3 ⁄4” WDoor Thickness Specifications:• Standard Door Thickness: 1 1 ⁄4”- 2”• Extended Door Thickness Range: 2”- 2 3 ⁄4”* Specify Door Thickness when ordering* Extension Kit not available separately3 ⁄4” Thickness4 7 ⁄16”3 ⁄4” Thickness4 1 ⁄2”2 3 ⁄4” Diameter3 ⁄4” Thickness2 3 ⁄4” Diameter3 ⁄4” Thickness2 9 ⁄16”2 1 ⁄2”32

2008 dimension 6/19/09 4:07 PM Page 33SANDCAST BRONZE KEY IN KNOBSET AND LEVERSETIncludes Latch and Strike Plate2” Gap2 1 ⁄2” Projection2 3 ⁄4” Projection2 1 ⁄4” DiameterDurango Lever (D)4 7 ⁄16”5” W3 ⁄4” Thickness4 1 ⁄2”Winchester Knob (WC)Door Thickness Specifications:• Standard Door Thickness: 1 1 ⁄4”- 2”• Extended Door Thickness Range: 2”- 2 3 ⁄4”* Specify Door Thickness when ordering* Extension Kit not available separately3 ⁄4” Thickness2 3 ⁄4” Diameter3 ⁄4” Thickness2 9 ⁄16”2 1 ⁄2”LOST WAX CAST BRONZE KEY IN KNOBSET AND LEVERSET1 7 ⁄8” Gap2 13 ⁄16” Projection2 9 ⁄16” ProjectionSiena Lever (SN)5 1 ⁄16”Petal Knob (PT)2 5 ⁄16” DiameterDoor Thickness Specifications:• Standard Door Thickness: 1 1 ⁄4”- 2”• Extended Door Thickness Range: 2”- 2 3 ⁄4”3 ⁄4” Thickness4 7 ⁄16”4 1 ⁄2” 3 ⁄4” Thickness332 9 ⁄16”2 3 ⁄4” Diameter3 ⁄4” Thickness2 9 ⁄16”







2008 dimension 6/19/09 4:07 PM Page 40SINGLE POINT & TWO POINT LOCKS WITH TRENTON PLATES5 1 ⁄2” C-TO-C DOOR PREPSingle Point LockSingle Point LockTwo Point LockTwo Point LockKey in HandleKey in Handle, DummySingle CylinderDouble Cylinder5300535053105320• Standard Door Thickness: 1 5 ⁄8”- 2”• Extended Door Thickness: 2”- 2 1 ⁄2”• Specify Door Thickness when ordering• Extension Kit not available separately• Schlage C Keyway• Standard Door Prep and Installation• Door Prep 5 1 ⁄2” C-To-C• Plate dimensions are the same as Trenton Plate Style on page xx• Projection depends on Knob/Lever StyleEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281240



2008 dimension 6/19/09 4:07 PM Page 43BRASS TUBULAR ENTRANCE HANDLESETS2 7 ⁄8”2 1 ⁄16” 2 5 ⁄8”2 7 ⁄8”10 1 ⁄4”10 1 ⁄4”2 3 ⁄8”Standard interior trimPart # 48142”1 1 ⁄2”Zeus StylePart # 4814Additional Dimensions: (Part # 4814)• Exterior Projection is 2 1 ⁄2”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 1 ⁄16”• Clearance between door & grip is 1”- 1 3 ⁄8”• Plates thickness: 7 ⁄16”• Refer to page 57 for Door Thickness Specifications• Same dimensions for dummy function43EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 44BRASS TUBULAR ENTRANCE HANDLESETS2 11 ⁄16”3 5 ⁄8”2 1 ⁄4” 2 11 ⁄16”2 3 ⁄4”2 1 ⁄2”3”3”10”3”11”3”11”4 1 ⁄2”19”19”2 1 ⁄2”19 1 ⁄2”Standard interior trimPart # 4410/4411/44123”3”1 13 ⁄16”Saratoga StylePart # 44101 13 ⁄16”Marietta StylePart # 44111 7 ⁄8”3”Marietta-6 StylePart # 4412Additional Dimensions: (Part # 4410)• Exterior Projection is 2 11 ⁄16”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 1 ⁄4”• Clearance between door & grip is 1 15 ⁄16”• Standard Interior trim dimensionssame as 8450, 8350, 8100• Plates thickness: 7 ⁄16”Additional Dimensions: (Part # 4411)• Exterior Projection is 2 3 ⁄4”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 3 ⁄4”• Clearance between door & grip is 2”• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 4412)• Exterior Projection is 2 11 ⁄16”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 3 ⁄4”• Clearance between door & grip is 2”• Plates thickness: 7 ⁄16”• Refer to page 57 for Door Thickness Specifications• Same dimensions for dummy functionEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281244

2008 dimension 6/19/09 4:07 PM Page 45BRASS TUBULAR ENTRANCE HANDLESETS2 1 ⁄2”2 13 ⁄16”2 13 ⁄16”3 5 ⁄8”2 3 ⁄8”2 12 ⁄16”9 3 ⁄4”9 3 ⁄4”19”4 1 ⁄2”19”2 1 ⁄8”Standard interior trimPart # 43133”3”2 1 ⁄8”Nashville StylePart # 4312/43222 1 ⁄8”Richmond StylePart # 4313/4323Additional Dimensions: (Part # 4410)• Exterior Projection is 2 11 ⁄16”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 1 ⁄4”• Clearance between door & grip is 1 15 ⁄16”• Standard Interior trim dimensionssame as 8108, 8466, 8366• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 4412)• Exterior Projection is 2 11 ⁄16”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 1 ⁄4”• Clearance between door & grip is 2”• Plates thickness: 1 ⁄2”• Refer to page 57 for Door Thickness Specifications• Same dimensions for dummy function45EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 46BRASS TUBULAR ENTRANCE HANDLESETS2 1 ⁄4”2 1 ⁄2”3 5 ⁄8”2 13 ⁄16”9 3 ⁄4”2 13 ⁄16”2 13 ⁄16”17 1 ⁄4”2 3 ⁄8”19”4 1 ⁄2”9 3 ⁄4”2 1 ⁄8”Standard interior trimPart # 43111 7 ⁄16”Knoxville StylePart # 43101 7 ⁄16”Orleans StylePart # 4311Additional Dimensions: (Part # 4310)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1”• Clearance between door & grip is 1 1 ⁄2”• Standard Interior trim dimensions same as8458, 8358, 8108• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 4311)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1”• Clearance between door & grip is 1 1 ⁄2”• Plates thickness: 1 ⁄2”• Refer to page 57 for Door Thickness Specifications• Same dimensions for dummy functionEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281246

2008 dimension 6/19/09 4:07 PM Page 47BRASS TUBULAR ENTRANCE HANDLESETS3”3”2 13 ⁄16”2 13 ⁄16”2 3 ⁄4”3”3 1 ⁄8”3 1 ⁄4”11”11”11 3 ⁄4”11 3 ⁄4”18”18”2 3 ⁄4”Standard interior trimPart # 4811Standard interior trimPart # 41113 1 ⁄4”2 1 ⁄4”2 1 ⁄4”1 7 ⁄16”Arts & Crafts StylePart # 4811Valley Forge StylePart # 4111Additional Dimensions: (Part # 4811)• Exterior Projection is 2 5 ⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 1 ⁄4”• Clearance between door & grip is 1 1 ⁄2”• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 4111)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 7 ⁄16”• Clearance between door & grip is 1 1 ⁄4”• Plates thickness: 1 ⁄2”• Refer to page 57 for Door Thickness Specifications• Same dimensions for dummy function47EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 48BRASS TUBULAR ENTRANCE HANDLESETS2 7 ⁄16”2 11 ⁄16”3”2 3 ⁄4”2 1 ⁄8”2 3 ⁄8” 2 11 ⁄16”2 3 ⁄4”2 3 ⁄8”10”17 1 ⁄4”4 3 ⁄4”17 1 ⁄2”18 1 ⁄2”10”2 3 ⁄8”Standard interior trimPart # 4213Standard interior trimPart # 4211/42122 1 ⁄4”2 1 ⁄4”2 1 ⁄4”Hamden StylePart # 42132 1 ⁄4”Wilshire StylePart # 421117”Melrose StylePart # 4212Additional Dimensions: (Part # 4213/4211/4212)• Exterior Projection is 2 5 ⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1”• Clearance between door & grip is 1 3 ⁄8”• Standard Interior trim dimensions same as8468, 8368, 8121• Plates thickness: 1 ⁄2”• Refer to page 57 for Door Thickness Specifications• Same dimensions for dummy functionEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281248

2008 dimension 6/19/09 4:07 PM Page 49BRASS TUBULAR ENTRANCE HANDLESETS3 5 ⁄16”3”3”3”3 5 ⁄16”2 3 ⁄8” 3 1 ⁄16”3 5 ⁄16”3 5 ⁄16”2 11 ⁄16”10 5 ⁄16”12 3 ⁄16”12 3 ⁄16”18”10 5 ⁄16”18”18”3 9 ⁄16”2 3 ⁄8”Standard interior trimPart # 4711/4911Standard interior trimPart # 47141 7 ⁄16”Oval Ribbon & Reed StylePart # 47141 7 ⁄16”Ribbon & Reed StylePart # 4711Imperial StylePart # 4911Additional Dimensions: (Part # 4714/4711/4911)• Exterior Projection is 2 11 ⁄16”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 5 ⁄16”• Clearance between door & grip is 1 9 ⁄16”• Plates thickness: 1 ⁄2”• Refer to page 57 for Door Thickness Specifications• Same dimensions for dummy function49EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 50WROUGHT STEEL TUBULAR ENTRANCE HANDLESETS2 1 ⁄2”2 9 ⁄16”3 7 ⁄16”2 1 ⁄2”2 9 ⁄16”3 7 ⁄16”2 1 ⁄2”2 9 ⁄16”3 7 ⁄16”17”4 3 ⁄8”17” 19”4 3 ⁄8” 4 3 ⁄8”Standard interior trimPart #461212/461222/4612323”1 3 ⁄4”Sectional StyleLafayette GripPart # 4612121 3 ⁄4” 2”Sectional StyleNormandy GripPart # 461222Sectional StyleSan Carlos GripPart # 461232Additional Dimensions: (Part # 461212/461222)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 3 ⁄4”• Clearance between door & grip is 1 5 ⁄8”• Standard Interior trim dimensions same as8451, 8361, 7101• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 461232)• Exterior Projection is 3 1 ⁄2”• Interior Projection Depends on Handle Style• Overall Grip thickness: 3 ⁄4”• Clearance between door & grip is 2”• Standard Interior trim dimensions same as8451, 8361, 7101• Plates thickness: 1 ⁄2”• Refer to page 58 for Door Thickness Specifications• Same dimensions for dummy functionEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281250

2008 dimension 6/19/09 4:07 PM Page 51WROUGHT STEEL TUBULAR ENTRANCE HANDLESETS2 9 ⁄16”2 9 ⁄16”2 9 ⁄16”2 9 ⁄16”2 1 ⁄16”2 1 ⁄16”2 1 ⁄16”2 5 ⁄16”9 5 ⁄8” 9 5 ⁄8”9 5 ⁄8”9 5 ⁄8”17”17”19”2 1 ⁄16”Standard interior trimPart #461111/461121/4611313”1 3 ⁄4”Monolithic StyleLafayette GripPart # 4611111 3 ⁄4”Monolithic StyleNormandy GripPart # 4611212”Monolithic StyleSan Carlos GripPart # 461131Additional Dimensions: (Part # 461111/461121)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 3 ⁄4”• Clearance between door & grip is 1 5 ⁄8”• Interior trim same as 8451, 8361, 7101• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 461131)• Exterior Projection is 3 1 ⁄2”• Interior Projection Depends on Handle Style• Overall Grip thickness: 3 ⁄4”• Clearance between door & grip is 2”• Interior trim same as 8451, 8361, 7101• Plates thickness: 1 ⁄2”• Refer to page 58 for Door Thickness Specifications• Same dimensions for dummy function51EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 52SANDCAST BRONZE TUBULAR ENTRANCE HANDLESETS2 3 ⁄8”2 13 ⁄16”2 1 ⁄2”2 3 ⁄16”2 13 ⁄16”3 7 ⁄16”9 1 ⁄2”2 3 ⁄8”2 13 ⁄16”9 1 ⁄2”16 1 ⁄4”4 7 ⁄16”16 1 ⁄4”19 5 ⁄16”2”Standard interior trimPart #451211/451112/4513323”3”2 1 ⁄8”Denver StylePart # 4512112 1 ⁄8”Remington StylePart # 4511123”Greeley StylePart # 451332Additional Dimensions: (Part # 451211)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 11 ⁄16”• Clearance between door & grip is 1 7 ⁄8”• Standard Interior trim dimensions same as8457, 8357, 7108• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 451112/451332)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 11 ⁄16”• Clearance between door & grip is 1 7 ⁄8”• Plates thickness: 1 ⁄2”• Refer to page 58 for Door Thickness Specifications• Same dimensions for dummy functionGrip-By-Grip Entrance Handlesets:• Dimensions are the same as exteriortrim of standard grip handlesets• Refer to page 54 for door thickness specificationsEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281252

2008 dimension 6/19/09 4:07 PM Page 53SANDCAST BRONZE TUBULAR ENTRANCE HANDLESETS2 3 ⁄8”2 1 ⁄4”2 1 ⁄4”3”2 13 ⁄16”2 13 ⁄16”2 13 ⁄16”10”2 1 ⁄2”16 1 ⁄4”4 3 ⁄4”16 1 ⁄4”19”10”2 1 ⁄4”3”3”Standard interior trimPart #451411/451512/4516132 3 ⁄16”Rectangular SectionalPart # 4514112 3 ⁄16”Rectangular MonolithicPart # 4515122 13 ⁄16”Rectangular Full LengthPart # 451613Additional Dimensions: (Part # 451411)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 11 ⁄16”• Clearance between door & grip is 1 7 ⁄8”• Standard Interior trim dimensions same as8465, 8365, 7104• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 451512/451613)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 11 ⁄16”• Clearance between door & grip is 1 7 ⁄8”• Plates thickness: 1 ⁄2”• Refer to page 59 for Door Thickness Specifications• Same dimensions for dummy functionGrip-By-Grip Entrance Handlesets:• Dimensions are the same as exteriortrim of standard grip handlesets• Refer to page 60 for door thickness specifications53EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 54SANDCAST BRONZE TUBULAR ENTRANCE HANDLESETS2 5 ⁄8”2 13 ⁄16”2 13 ⁄16”2 1 ⁄4”2 1 ⁄4”2 13 ⁄16”1 3 ⁄4”2 1 ⁄2”2 13 ⁄16”10”10”16 1 ⁄4”4 1 ⁄2”16 1 ⁄4”19”2 1 ⁄4”Standard interior trimPart #451711/451812/4519133”3”2 3 ⁄16”Laramie StylePart # 4517112 3 ⁄16”Sheridan StylePart # 451812Creston StylePart # 451913Additional Dimensions: (Part # 451711)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 11 ⁄16”• Clearance between door & grip is 1 7 ⁄8”• Standard Interior trim dimensions same as7100, 8477, 8374• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 451812/451913)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 11 ⁄16”• Clearance between door & grip is 1 7 ⁄8”• Plates thickness: 1 ⁄2”• Refer to page 59 for Door Thickness Specifications• Same dimensions for dummy functionGrip-By-Grip Entrance Handlesets:• Dimensions are the same as exteriortrim of standard grip handlesets• Refer to page 60 for door thickness specificationsEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281254

2008 dimension 6/19/09 4:07 PM Page 55LOST WAX CAST BRONZE TUBULAR ENTRANCE HANDLESETS2 1 ⁄2”3”3”3 5 ⁄8”2 1 ⁄4”2 1 ⁄2”3”10” 10”18 1 ⁄2”4 1 ⁄2”18 1 ⁄2”2 1 ⁄4”Standard interior trimPart # 471224/4711123”3”1 13 ⁄16”Tuscany Sectional StylePart # 4712241 13 ⁄16”Tuscany StyleDoor Prep 5 1 /2” Center to CenterPart # 471112Additional Dimensions: (Part # 471224)• Exterior Projection is 3 9 ⁄32”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 9 ⁄16”• Clearance between door & grip is 2 3 ⁄8”• Standard Interior trim dimensions same as8456, 8356, 71012• Plates thickness: 1 ⁄2”Additional Dimensions: (Part # 471112)• Exterior Projection is 3 9 ⁄32”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1”• Clearance between door & grip is 2 3 ⁄8”• Plates thickness: 1 ⁄2”• Refer to page 59 for Door Thickness Specifications• Same dimensions for dummy functionGrip-By-Grip Entrance Handlesets:• Dimensions are the same as exteriortrim of standard grip handlesets• Refer to page 60 for door thickness specifications55EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 56LOST WAX CAST BRONZE TUBULAR ENTRANCE HANDLESETS3”3”3”3”2 3 ⁄4”2 15 ⁄16”2 3 ⁄4”2 15 ⁄16”11 1 ⁄16”11 1 ⁄16”17 1 ⁄2”10 1 ⁄2”10 1 ⁄2”18”2 7 ⁄8”Standard interior trimPart # 4713332 5 ⁄16”Standard interior trimPart # 4712222 9 ⁄16”2 1 ⁄16”Art Nouveau StyleRight Hand GripDoor Prep 5 1 /2” Center to CenterPart # 4713331 1 ⁄2”Octagon StyleDoor Prep 5 1 /2” Center to CenterPart # 471222Additional Dimensions: (Part # 471333/471222)• Exterior Projection is 3 1 ⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 3 ⁄4”• Clearance between door & grip is 1 3 ⁄4”• Plates thickness: 1 ⁄2”• Refer to page 59 for Door Thickness Specifications• Same dimensions for dummy functionGrip-By-Grip Entrance Handlesets:• Dimensions are the same as exteriortrim of standard grip handlesets• Refer to page 60 for door thickness specificationsEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281256

2008 dimension 6/19/09 4:07 PM Page 57• Standard Door Thickness: 1 3 ⁄4”- 2 1 ⁄8”Standard Components:• 1 1 ⁄2” Rosette Screws• Single Cylinder Tailpiece• Outside Entry Spindle• Inside Passage Half Spindle• 2 1 ⁄4” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Standard Door Thickness: 1 5 ⁄8”- 2 1 ⁄8”Standard Components:• 1 1 ⁄2” Rosette Screws• Double Cylinder Tailpiece• Outside Entry Spindle• Inside Passage Half Spindle• 2 1 ⁄4” & 2 1 ⁄2 Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Standard Door Thickness: 1 3 ⁄4”- 2 1 ⁄8”Standard Components:• 1 1 ⁄2” Rosette Screws• Single Cylinder Tailpiece• Outside Entry Spindle• Inside Passage Half Spindle• 2 1 ⁄4” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike PlateDoor Thickness SpecificationsBrass Tubular Entryset Sectional, Single CylinderSaratoga (4410), Knoxville (4310), Hamden (4213), Nashville (4312)• Extended Door Thickness: 2 1 ⁄4”- 2 5 ⁄8”Extended Components:• 2” Rosette Screws• Long Single Cylinder Tailpiece• Long Outside Entry Spindle• Long Inside Passage Half Spindle• 3” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike PlateBrass Tubular Entryset Sectional, Double CylinderSaratoga (4420), Knoxville (4320), Hamden (4223), Nashville (4322)• Extended Door Thickness: 2 1 ⁄4”- 2 5 ⁄8”Extended Components:• 2” Rosette Screws• Long Double Cylinder Tailpiece• Long Outside Entry Spindle• Long Inside Passage Half Spindle• 3” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 5 ⁄8”- 3”Extended Components:• 2 1 ⁄2” Rosette Screws• Extra Long Single Cylinder Tailpiece• Long Outside Entry Spindle• Extra Long Inside Passage Half Spindle• 3 1 ⁄2” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 5 ⁄8”- 2 7 ⁄8”Extended Components:• 2 1 ⁄2” Rosette Screws• Extra Long Double Cylinder Tailpiece• Long Outside Entry Spindle• Extra Long Inside Passage Half Spindle• 3 1 ⁄2” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike PlateBrass Tubular Entryset Monolithic, Single CylinderMarietta (4411), Marietta 6” (4412), Orleans (4311), Arts & Crafts (4811), Valley Forge (4111), Wilshire (4211),Melrose (4212), Oval Ribbon & Reed (4714), Ribbon & Reed (4711), Imperial (4911), Zeus (4814), Richmond (4313)• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Rosette Screws• Double Cylinder Tailpiece• Outside Entry Spindle• Inside Passage Half Spindle• 2 1 ⁄4” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate* Part # DB4-COLLAR32 Available for 1 3 ⁄8” Thick Doors• Extended Door Thickness: 2 1 ⁄4”- 2 1 ⁄2”Extended Components:• 2” Rosette Screws• Long Single Cylinder Tailpiece• Long Outside Entry Spindle• Long Inside Passage Half Spindle• 3” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄2”- 3”Extended Components:• 2 1 ⁄2” Rosette Screws• Extra Long Single Cylinder Tailpiece• Long Outside Entry Spindle• Extra Long Inside Passage Half Spindle• 3” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike PlateBrass Tubular Entryset Monolithic, Double CylinderMarietta (4421), Marietta 6” (4422), Orleans (4321), Arts & Crafts (4821), Valley Forge (4121), Wilshire (4221),Melrose (4212), Oval Ribbon & Reed (4724), Ribbon & Reed (4721), Imperial (4921), Zeus (4824), Richmond (4323)• Extended Door Thickness: 2”- 2 5 ⁄8”Extended Components:• 2” Rosette Screws• Long Double Cylinder Tailpiece• Long Outside Entry Spindle• Long Inside Passage Half Spindle• 3” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike Plate* Part # DB4-COLLAR32 Available for 1 3 ⁄8” Thick Doors• Extended Door Thickness: 2 5 ⁄8”- 2 7 ⁄8”Extended Components:• 2 1 ⁄2” Rosette Screws• Long Double Cylinder Tailpiece• Long Outside Entry Spindle• Extra Long Inside Passage Half Spindle• 3 1 ⁄2” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike Plate57EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 58• Standard Door Thickness: 1 5 ⁄8”- 2”Standard Components:• 1 1 ⁄2” Rosette Screws• Single Cylinder Tailpiece• Outside Entry Spindle• Inside Passage Half Spindle• 2 1 ⁄4” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Standard Door Thickness: 1 1 ⁄2”- 2”Standard Components:• 1 1 ⁄2” Rosette Screws• Double Cylinder Tailpiece• Outside Entry Spindle• Inside Passage Half Spindle• 2 1 ⁄4” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike PlateDoor Thickness SpecificationsWrought Steel Tubular Entryset Sectional, Single CylinderLafayette (461212), San Carlos (461222), Normandy (461232)• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 2” Rosette Screws• Long Single Cylinder Tailpiece• Long Outside Entry Spindle• Long Inside Passage Half Spindle• 3” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄2”- 2 7 ⁄8”Extended Components:• 2 1 ⁄2” Rosette Screws• Extra Long Single Cylinder Tailpiece• Long Outside Entry Spindle• Extra Long Inside Passage Half Spindle• 3 1 ⁄2” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike PlateWrought Steel Tubular Entryset Sectional, Double CylinderLafayette (462212), San Carlos (462222), Normandy (462232)• Extended Door Thickness: 2”- 2 5 ⁄8”Extended Components:• 2” Rosette Screws• Long Double Cylinder Tailpiece• Long Outside Entry Spindle• Long Inside Passage Half Spindle• 3” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 5 ⁄8”- 2 7 ⁄8”Extended Components:• 2 1 ⁄2” Rosette Screws• Extra Long Double Cylinder Tailpiece• Long Outside Entry Spindle• Extra Long Inside Passage Half Spindle• 3 1 ⁄2” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike PlateWrought Steel Tubular Entryset Monolithic, Single CylinderLafayette (461111), San Carlos (461121), Normandy (461131)• Standard Door Thickness: 1 3 ⁄4”- 2 1 ⁄8”Standard Components:• 1 1 ⁄2” Rosette Screws• Single Cylinder Tailpiece• Outside Entry Spindle• Inside Passage Half Spindle• 2 1 ⁄4” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄4”- 2 1 ⁄2”Extended Components:• 2” Rosette Screws• Long Single Cylinder Tailpiece• Long Outside Entry Spindle• Long Inside Passage Half Spindle• 2 1 ⁄2” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄2”- 3”Extended Components:• 2 1 ⁄2” Rosette Screws• Extra Long Single Cylinder Tailpiece• Long Outside Entry Spindle• Extra Long Inside Passage Half Spindle• 3” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike PlateWrought Steel Tubular Entryset Monolithic, Double CylinderLafayette (462111), San Carlos (462121), Normandy (462131)• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Rosette Screws• Double Cylinder Tailpiece• Outside Entry Spindle• Inside Passage Half Spindle• 2 1 ⁄4” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 5 ⁄8”Extended Components:• 2” Rosette Screws• Long Double Cylinder Tailpiece• Long Outside Entry Spindle• Long Inside Passage Half Spindle• 3” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281258

2008 dimension 6/19/09 4:07 PM Page 59Door Thickness SpecificationsCast Bronze Tubular Entryset Sectional, Single CylinderDenver (451211), Rectangular Sectional (451411), Tuscany Sectional (471224), Laramie (451711)• Standard Door Thickness: 1 1 ⁄2”- 2”Standard Components:• 1 1 ⁄2” & 2” Rosette Screws• Single Cylinder Tailpiece• Outside Entry Spindle• Inside Passage Half Spindle• 2 1 ⁄2” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 2” Rosette Screws• Long Single Cylinder Tailpiece• Long Outside Entry Spindle• Long Inside Passage Half Spindle• 3” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄2”- 2 7 ⁄8”Extended Components:• 2 1 ⁄2” Rosette Screws• Extra Long Single Cylinder Tailpiece• Long Outside Entry Spindle• Extra Long Inside Passage Half Spindle• 3 1 ⁄2” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike PlateCast Bronze Tubular Entryset Sectional, Double CylinderDenver (452211), Rectangular Sectional (452411), Tuscany Sectional (472224), Laramie (452711)• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Rosette Screws• Double Cylinder Tailpiece• Outside Entry Spindle• Inside Passage Half Spindle• 2 1 ⁄2” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄4”- 2 5 ⁄8”Extended Components:• 2” & 2 1 ⁄2” Rosette Screws• Long Double Cylinder Tailpiece• Long Outside Entry Spindle• Long Inside Passage Half Spindle• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike PlateCast Bronze Tubular Entryset Monolithic, Single CylinderRemington (451112), Greeley (451332), Rectangular Monolithic (451512), Sheridan (451812)Rectangular Full Length (451613), Tuscany (471112), Art Nouveau (471333), Octagon (471222), Creston (451913)• Standard Door Thickness: 1 1 ⁄2”- 2”Standard Components:• 1 1 ⁄2” & 2” Rosette Screws• Single Cylinder Tailpiece• Outside Entry Spindle• Long Inside Passage Half Spindle• 2 1 ⁄2” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 2” Rosette Screws• Long Single Cylinder Tailpiece• Long Outside Entry Spindle• Long Inside Passage Half Spindle• 3” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄2”- 2 7 ⁄8”Extended Components:• 2 1 ⁄2” Rosette Screws• Extra Long Single Cylinder Tailpiece• Long Outside Entry Spindle• Extra Long Inside Passage Half Spindle• 3 1 ⁄2” Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike PlateCast Bronze Tubular Entryset Monolithic, Double CylinderRemington (452112), Greeley (452332), Rectangular Monolithic (452512), Sheridan (452812)Rectangular Full Length (452613), Tuscany (472112), Art Nouveau (472333), Octagon (472222), Creston (452913)• Standard Door Thickness: 1 3 ⁄4”- 2”Standard Components:• 1 1 ⁄2” Rosette Screws• Double Cylinder Tailpiece• Outside Entry Spindle• Long Inside Passage Half Spindle• 2 1 ⁄2” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 5 ⁄8”Extended Components:• 2” & 2 1 ⁄2”Rosette Screws• Long Double Cylinder Tailpiece• Long Outside Entry Spindle• Long Inside Passage Half Spindle• 3” & 3 1 ⁄2”Deadbolt Mounting Screws• Spindle Extensions• Extended Full-Lip Strike Plate• Deadbolt Strike Plate59EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 60Door Thickness SpecificationsGrip-By-Grip Tubular Entryset, Single CylinderDenver(454212), Remington(454111), Greeley(454333), Rectangular Sectional(454414),Rectangular Monolithic(454515), Rectangular Full Length(454636), Tuscany Sectional(474444), Tuscany(474111),Octagon(474222), Art Nouveau-LH(474333LH), Art Nouveau-RH(474333RH)• Standard Door Thickness: 1 5 ⁄8”- 2”Standard Components:• 1 1 ⁄2” & 2” Rosette Screws• Single Cylinder Tailpiece• Outside Entry Spindle• Inside Passage Half Spindle• 2 1 ⁄2” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• 2” & 2 1 ⁄2” Rosette Screws• Long Single Cylinder Tailpiece• Long Outside Entry Spindle• 3” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄2”- 3”Extended Components:• 2 1 ⁄2” & 3” Rosette Screws• Extra Long Single Cylinder Tailpiece• Long Outside Entry Spindle• 3 1 ⁄2” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike PlateGrip-By-Grip Tubular Entryset, Double CylinderDenver(454212), Remington(454111), Greeley(454333), Rectangular Sectional(454414),Rectangular Monolithic(454515), Rectangular Full Length(454636), Tuscany Sectional(474444), Tuscany(474111),Octagon(474222), Art Nouveau-LH(474333LH), Art Nouveau-RH(474333RH)• Standard Door Thickness: 1 5 ⁄8”- 2 1 ⁄8”Standard Components:• 1 1 ⁄2” Rosette Screws• Double Cylinder Tailpiece• Outside Entry Spindle• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄8”- 3”Extended Components:• 2 1 ⁄2” & 3” Rosette Screws• Long Double Cylinder Tailpiece• Long Outside Entry Spindle• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike PlateStandardHeavy DutySteel UnderstrikeHeavy DutyFull Lip DeadboltUnderstrike9 ⁄16”EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281260









2008 dimension 6/19/09 4:07 PM Page 69BORING SPECIFICATIONS(Marietta-6 Style) For Reference Only69

2008 dimension 6/19/09 4:07 PM Page 70BORING SPECIFICATIONS(Marietta-6 Style)For Reference Only70

2008 dimension 6/19/09 4:07 PM Page 71DECORATIVE BRASS DEADBOLTS1 3 ⁄8”Regular Style2 3 ⁄8” Dia.2 1 ⁄2” Dia.Exterior Trim (8450)• Projection is 13 ⁄16”• 8350 same on both sidesInterior Trim (8450)• Projection is 1 1 ⁄4”• Thickness is 5 ⁄16”1 3 ⁄8”Low Profile Style*2 3 ⁄4”**2 3 ⁄8”2 1 ⁄2” Dia.Exterior Trim (8455)* 2 3 ⁄4” Diameter with Exterior ring** 2 3 ⁄8” Diameter without Exterior ring• Projection with Exterior ring: 7 ⁄8”• Projection without Exterior ring: 5 ⁄8”• 8355 same both sidesInterior Trim (8455)• Projection is 1 1 ⁄4”• Thickness is 5 ⁄16”1 3 ⁄8”*2 3 ⁄4”**2 3 ⁄8”Rope Style2 1 ⁄2” Dia.Exterior Trim (8464)* 2 1 ⁄2” Diameter with Exterior ring** 2 3 ⁄8” Diameter without Exterior ring• Projection with ext. ring: 11 ⁄16”• Projection without ext. ring: 1 ⁄2”• 8364 same both sidesInterior Trim (8464)• Projection is 1 1 ⁄4”• Thickness is 5 ⁄16”• Refer to page 78 for Door Thickness Specifications71EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 72DECORATIVE BRASS DEADBOLTS#8 Style3 5 ⁄8”1 3 ⁄8” 3 5 ⁄8”2 1 ⁄2”Exterior Trim (8466)• Projection is 1 ⁄2”• 8366 same on both sides2 1 ⁄2”Interior Trim (8466)• Projection is 1 1 ⁄4”• Thickness is 5 ⁄16”Rectangular Style2 3 ⁄4”1 3 ⁄8”2 3 ⁄4”2 7 ⁄16”Exterior Trim (8468)• Projection is 9 ⁄16”• 8368 same on both sides2 7 ⁄16”Interior Trim (8468)• Projection is 1 1 ⁄4”• Thickness is 9 ⁄32”Saratoga Style3 5 ⁄8”1 3 ⁄8” 3 5 ⁄8”2 1 ⁄2”Exterior Trim (8458)• Projection is 1 ⁄2”• 8358 same on both sides2 1 ⁄2”Interior Trim (8458)• Projection is 1 1 ⁄4”• Thickness is 1 ⁄2”1 3 ⁄8” Dia.Modern Style2 3 ⁄8” Dia. 2 3 ⁄8” Dia.Exterior Trim (8467)• Projection is 5 ⁄8”• 8367 same on both sidesInterior Trim (8467)• Projection is 1 1 ⁄4”• Thickness is 5 ⁄16”• Refer to page 79 for Door Thickness SpecificationsEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281272

2008 dimension 6/19/09 4:07 PM Page 73DECORATIVE BRASS DEADBOLTS1 3 ⁄8”Knoxville Style3 5 ⁄8”3 5 ⁄8”2 1 ⁄2” 2 1 ⁄2”Exterior Trim (8459)• Projection is 1 ⁄2”• 8359 same on both sidesInterior Trim (8459)• Projection is 1 1 ⁄4”• Thickness is 1 ⁄2”1 3 ⁄8”Arts & Crafts Style2 1 ⁄2”2 1 ⁄2”2 1 ⁄2” 2 1 ⁄2”Exterior Trim (8454)• Projection is 9 ⁄16”• 8354 same on both sidesInterior Trim (8454)• Projection is 1 1 ⁄4”• Thickness is 5 ⁄16”1 3 ⁄8”Square Style2 1 ⁄2” 2 1 ⁄2”2 1 ⁄2”Exterior Trim (8469)• Projection is 5 ⁄8”• 8358 same on both sides2 1 ⁄2”Interior Trim (8469)• Projection is 1 1 ⁄4”• Thickness is 5 ⁄16”73• Refer to page 79 for Door Thickness SpecificationsEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 74SANDCAST BRONZE DEADBOLTS1 3 ⁄8”Regular Style2 3 ⁄8”2 1 ⁄2” Dia.Exterior Trim (8450)• Projection is 1”• 8350 same on both sidesWith #1 Style Plate and FlapInterior Trim (8450)• Projection is 1 1 ⁄4”• Thickness is 5 ⁄16”3 7 ⁄16”3 7 ⁄16”2 3 ⁄8”Exterior Trim (8457)• Projection is 13 ⁄16”• 8357 same on both sidesWith #4 Style Plate and Flap2 3 ⁄8”Interior Trim (8457)• Projection is 1 1 ⁄4”• Thickness is 1 ⁄2”3 1 ⁄2”3 1 ⁄2”2 5 ⁄8”Exterior Trim (8474)• Projection is 11 ⁄16”• 8374 same on both sidesWith #3 Style Plate and Flap2 5 ⁄8”Interior Trim (8474)• Projection is 1 1 ⁄4”• Thickness is 3 ⁄8”3”3”2 7 ⁄16”Exterior Trim (8465)• Projection is 11 ⁄16”• 8365 same on both sides2 7 ⁄16”Interior Trim (8465)• Projection is 1 1 ⁄4”• Thickness is 1 ⁄2”• Refer to page 80 for Door Thickness SpecificationsEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281274

2008 dimension 6/19/09 4:07 PM Page 75LOST WAX CAST BRONZE DEADBOLTS1 3 ⁄8”Tuscany Deadbolt*2 3 ⁄4”**2 3 ⁄8”2 1 ⁄2”Exterior Trim (8456)* 2 3 ⁄4” Diameter with Exterior ring** 2 3 ⁄8” Diameter without Exterior ring• Projection with ext. ring: 1”• Projection without ext. ring: 11 ⁄16”• 8356 same both sidesInterior Trim (8456)• Projection is 1 1 ⁄4”• Thickness is 5 ⁄16”1 3 ⁄8”Tuscany Classic Deadbolt*2 3 ⁄4”**2 3 ⁄8”2 1 ⁄2”Exterior Trim (8471)* 2 3 ⁄4” Diameter with Exterior ring** 2 3 ⁄8” Diameter without Exterior ring• Projection with ext. ring: 1”• Projection without ext. ring: 11 ⁄16”• 8356 same both sidesInterior Trim (8471)• Projection is 1 1 ⁄4”• Thickness is 5 ⁄16”1 3 ⁄8”Octagon Style Deadbolt2 3 ⁄8”2 1 ⁄2”Exterior Trim (8460)• Projection is 3 ⁄4”• 8360 same on both sidesInterior Trim (8460)• Projection is 1 1 ⁄4”• Thickness is 5 ⁄16”75• Refer to page 81 for Door Thickness SpecificationsEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 76LOST WAX CAST BRONZE DEADBOLTS#11 Style Deadbolt3 7 ⁄16”3 7 ⁄16”2 7 ⁄16”Exterior Trim (8473)• Projection is 11 ⁄16”8372 same both sides2 7 ⁄16”Interior Trim (8473)• Projection is 1 1 ⁄4”• Thickness is 9 ⁄16”#14 Style Deadbolt3 5 ⁄8”3 5 ⁄8”2 1 ⁄2”Exterior Trim (8472)• Projection is 11 ⁄16”8373 same both sides2 1 ⁄2”Interior Trim (8472)• Projection is 1 1 ⁄4”• Thickness is 9 ⁄16”1 3 ⁄8”Art Nouveau Style Deadbolt2 5 ⁄16”2 1 ⁄2”Exterior Trim (8470)• Projection is 5 ⁄8”• 8370 same on both sidesInterior Trim (8470)• Projection is 1 1 ⁄4”• Thickness is 5 ⁄16”• Refer to page 81 for Door Thickness SpecificationsEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281276

2008 dimension 6/19/09 4:07 PM Page 77WROUGHT STEEL DEADBOLTS1 3 ⁄8”#1 Style Deadbolt3 7 ⁄16”3 5 ⁄8”2 1 ⁄2”Exterior Trim (8461)• Projection is 5 ⁄8”• 8361 same on both sides#2 Style Deadbolt2 3 ⁄8”2 9 ⁄16”Interior Trim (8461)• Projection is 1 1 ⁄4”• Thickness is 1 ⁄4”2 3 ⁄8”Exterior Trim (8452)• Projection is 2 3 ⁄8”• 8350 same on both sides#3 Style DeadboltInterior Trim (8452)• Projection is 1 1 ⁄4”• Thickness is 1 ⁄4”3 1 ⁄2”3 1 ⁄2”2 1 ⁄2”Exterior Trim (8463)• Projection is 2 1 ⁄2”• 8363 same on both sides2 1 ⁄2”Interior Trim (8463)• Projection is 1 1 ⁄4”• Thickness is 1 ⁄4”• Refer to page 82 for Door Thickness SpecificationsStandardHeavy DutySteel UnderstrikeHeavy DutyFull Lip DeadboltUnderstrike77EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 78Door Thickness SpecificationsBrass Regular Style Deadbolt, Single CylinderRegular Style (8450)• Standard Door Thickness: 1 3 ⁄8”- 2 1 ⁄8”Standard Components:• 2 1 ⁄4” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄8”- 2 3 ⁄4”Extended Components:• Long Single Cylinder Tailpiece• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 3 ⁄4”- 3”Extended Components:• Extra Long Single Cylinder Tailpiece• 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateBrass Regular Style Deadbolt, Double CylinderRegular Style (8350)• Standard Door Thickness: 1 3 ⁄8”- 1 3 ⁄4”Standard Components:• Double Cylinder Tailpieces• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 1 3 ⁄4”- 2 1 ⁄2”Extended Components:• Long Double Cylinder Tailpieces• 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateBrass Low Profile & Rope Style Deadbolt, Single CylinderLow Profile (8455) & Rope Style (8464)• Standard Door Thickness: 1 1 ⁄4”- 2 1 ⁄4”Standard Components:• Single Cylinder Tailpiece• 2 1 ⁄4” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄4”- 2 3 ⁄4”Extended Components:• Long Single Cylinder Tailpiece• 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 3 ⁄4”- 3 3 ⁄8”Extended Components:• Extra Long Single Cylinder Tailpiece• 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateBrass Low Profile & Rope Style Deadbolt, Double CylinderLow Profile (8355) & Rope Style (8364)• Standard Door Thickness: 1 1 ⁄4”- 2 1 ⁄8”Standard Components:• Double Cylinder Tailpieces• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄8”- 2 7 ⁄8”Extended Components:• Long Double Cylinder Tailpieces• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281278

2008 dimension 6/19/09 4:07 PM Page 79Door Thickness SpecificationsBrass Deccorative Deadbolt, Single CylinderStyle #8 (8466), Arts & Crafts (8454), Rectangular (8468), Saratoga (8458) & Knoxville (8459)• Standard Door Thickness: 1 3 ⁄4”- 2 1 ⁄8”Standard Components:• Single Cylinder Tailpiece• 2 1 ⁄4” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄8”- 2 3 ⁄4”Extended Components:• Long Single Cylinder Tailpiece• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 3 ⁄4”- 3”Extended Components:• Extra Long Single Cylinder Tailpiece• 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateBrass Deccorative Deadbolt, Double CylinderStyle #8 (8366), Arts & Crafts (8354), Rectangular (8368), Saratoga (8358) & Knoxville (8359)• Standard Door Thickness: 1 1 ⁄2”- 1 7 ⁄8”Standard Components:• Double Cylinder Tailpieces• 2 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 1 7 ⁄8”- 2 5 ⁄8”Extended Components:• Long Double Cylinder Tailpieces• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike Plate* Part # DB4-COLLAR32 Available for 1 3 ⁄8” Thick DoorsBrass Modern Deadbolts, Single CylinderModern Style (8467) & Square Style (8469)• Standard Door Thickness: 1 3 ⁄4”- 2 1 ⁄8”Standard Components:• Single Cylinder Tailpiece• 2 1 ⁄4” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄8”- 2 3 ⁄4”Extended Components:• Long Single Cylinder Tailpiece• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 3 ⁄4”- 3”Extended Components:• Extra Long Single Cylinder Tailpiece• 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateBrass Modern Deadbolts, Double CylinderModern Style (8367) & Square Style (8369)• Standard Door Thickness: 1 1 ⁄2”- 1 7 ⁄8”Standard Components:• Double Cylinder Tailpieces• 2 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 1 7 ⁄8”- 2 5 ⁄8”Extended Components:• Long Double Cylinder Tailpieces• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike Plate79EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 80Door Thickness SpecificationsBronze Regular Style Deadbolt, Single Cylinder (8450BZ)• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Single Cylinder Tailpiece• 2 1 ⁄4” & 2 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 5 ⁄8”Extended Components:• Long Single Cylinder Tailpiece• 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 5 ⁄8”- 3”Extended Components:• Extra Long Single Cylinder Tailpiece• 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateBronze Regular Style Deadbolt, Double Cylinder (8350BZ)• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Long Double Cylinder Tailpieces• 3”& 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness Not Available for this ModelBronze Decorative Deadbolts, Single Cylinder#1 (8457), #3 (8465), #4 (8474)• Standard Door Thickness: 1 1 ⁄2”- 2 1 ⁄4”Standard Components:• Single Cylinder Tailpiece• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄4”- 3”Extended Components:• Long Single Cylinder Tailpiece• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateBronze Decorative Deadbolts, Double Cylinder#1 (8357) , #3 (8365), #4 (8374)• Standard Door Thickness: 1 3 ⁄4”- 2 3 ⁄8”Standard Components:• Double Cylinder Tailpieces• 2 1 ⁄4” & 2 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 1 7 ⁄8”- 2 5 ⁄8”Extended Components:• Long Double Cylinder Tailpieces• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281280

2008 dimension 6/19/09 4:07 PM Page 81Door Thickness SpecificationsBronze Tuscany & Tuscany Classic Style Deadbolt, Single CylinderTuscany (8456) & Tuscany Classic (8471)• Standard Door Thickness: 1 1 ⁄4”- 2 1 ⁄4”Standard Components:• Single Cylinder Tailpiece• 2 1 ⁄4” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄4”- 2 3 ⁄4”Extended Components:• Long Single Cylinder Tailpiece• 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 3 ⁄4”- 3 3 ⁄8”Extended Components:• Extra Long Single Cylinder Tailpiece• 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateBronze Tuscany & Tuscany Classic Style Deadbolt, Double CylinderTuscany (8356) & Tuscany Classic (8371)• Standard Door Thickness: 1 1 ⁄4”- 2 1 ⁄8”Standard Components:• Double Cylinder Tailpieces• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄8”- 2 7 ⁄8”Extended Components:• Long Double Cylinder Tailpieces• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateLost Wax Cast Bronze Deadbolts, Single CylinderOctagon (8460), Art Nouveau (8470), #11 Style (8472), #14 Style (8473)• Standard Door Thickness: 1 5 ⁄8”- 2 1 ⁄4”Standard Components:• Single Cylinder Tailpiece• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄4”- 3”Extended Components:• Long Single Cylinder Tailpiece• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateLost Wax Cast Bronze Deadbolts, Double CylinderOctagon (8360), Art Nouveau (8370), #11 Style (8372), #14 Style (8373)• Standard Door Thickness: 1 3 ⁄4”- 2 3 ⁄8”Standard Components:• Double Cylinder Tailpieces• 2 1 ⁄4” & 2 1 ⁄2”Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 3 ⁄8”- 3”Extended Components:• Long Double Cylinder Tailpieces• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike Plate81EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 82Door Thickness SpecificationsWrought Steel #2 Style Deadbolt, Single Cylinder (8352)• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Single Cylinder Tailpiece• 2 1 ⁄4” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 3 ⁄4”Extended Components:• Long Single Cylinder Tailpiece• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 3 ⁄4”- 3”Extended Components:• Extra Long Single Cylinder Tailpiece• 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateWrought Steel #2 Style Deadbolt, Double Cylinder (8350)• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Long Double Cylinder Tailpieces• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 1 7 ⁄8”- 2 1 ⁄2”Extended Components:• Long Double Cylinder Tailpieces• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateWrought Steel #1 & #3 Style Deadbolt, Single Cylinder (8461 & 8463)• Standard Door Thickness: 1 3 ⁄8”- 2 1 ⁄8Standard Components:• Single Cylinder Tailpiece• 2 1 ⁄4” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄8- 2 7 ⁄8”Extended Components:• Long Single Cylinder Tailpiece• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 7 ⁄8”- 3 3 ⁄8Extended Components:• Extra Long Single Cylinder Tailpiece• 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateWrought Steel #1 & #3 Style Deadbolt, Double Cylinder (8361 & 8363)• Standard Door Thickness: 1 1 ⁄2”- 2 1 ⁄4”Standard Components:• Double Cylinder Tailpieces• 2 1 ⁄4” & 3”Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄4”- 2 7 ⁄8Extended Components:• Long Double Cylinder Tailpieces• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Deadbolt Strike PlateBrass, Bronze & Wrought Steel Single-Sided Deadbolts• Standard Door Thickness: 1 5 ⁄8”- 2 3 ⁄8Standard Components:• Single Cylinder Tailpiece• 1 3 ⁄4” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 3 ⁄8- 2 3 ⁄4”Extended Components:• Long Single Cylinder Tailpiece• 2 1 ⁄4” Deadbolt Mounting Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 7 ⁄8”- 3 3 ⁄8Extended Components:• Extra Long Single Cylinder Tailpiece• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Deadbolt Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281282





2008 dimension 6/19/09 4:07 PM Page 87COLONIAL STYLEPlates are 3 ⁄8” thickDECORATIVE PLATE LOCKS1 3 ⁄4”7 1 ⁄8”3 9 ⁄16”7 1 ⁄8”Non-KeyedPassage (8010)Privacy (8020)Dummy (8001)KeyedSingle Cylinder (8060)Double Cylinder (8160)Dummy (8065)1 3 ⁄4”2 7 ⁄16”2 7 ⁄16”1 3 ⁄4”9”9”Non-KeyedPassage (8711)Privacy (8811)Dummy (8851)KeyedSingle Cylinder (8990)Double Cylinder (8991)Dummy (8995)3 1 ⁄4”1 3 ⁄4”2 7 ⁄16”2 7 ⁄16”BELMONT STYLEPlates are 3 ⁄8” thick1 15 ⁄16” 1 15 ⁄16”7 1 ⁄2”7 1 ⁄2”Non-KeyedPassage (8102)Privacy (8202)Dummy (8075)KeyedSingle Cylinder (8070)Double Cylinder (8071)Dummy (8075)1 15 ⁄16”2 7 ⁄16”2 7 ⁄16”• Refer to page 95 for Door Thickness Specifications87EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 88DECORATIVE PLATE LOCKSQUINCY STYLEPlates are 3 ⁄8” thick1 7 ⁄8”1 7 ⁄8”7 1 ⁄8”7 1 ⁄8”Non-KeyedPassage (8104)Privacy (8204)Dummy (8054)KeyedSingle Cylinder (8080)Double Cylinder (8081)Dummy (8085)1 5 ⁄8”2 5 ⁄8”2 5 ⁄8”1 3 ⁄4”9”5 3 ⁄4”9”Non-KeyedPassage (8704)Privacy (8804)Dummy (8854)KeyedSingle Cylinder (8980)Double Cylinder (8981)Dummy (8985)1 3 ⁄4”2 5 ⁄8”2 5 ⁄8”VICTORIA STYLEPlates are 3 ⁄8” thick2 7 ⁄8”3”7 3 ⁄4”9”Non-KeyedPassage (8103)Privacy (8203)Dummy (8053)KeyedSingle Cylinder (8090)Double Cylinder (8091)Dummy (8095)2 3 ⁄8”2 1 ⁄2”2 7 ⁄8”• Refer to page 95 for Door Thickness SpecificationsEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281288

2008 dimension 6/19/09 4:07 PM Page 89DECORATIVE PLATE LOCKSOVAL BEADED STYLEPlates are 3 ⁄8” thick2 3 ⁄8”2 1 ⁄8”7”8”2 1 ⁄4”2 11 ⁄16”2 11 ⁄16”Non-KeyedPassage (8105)Privacy (8205)Dummy (8055)KeyedSingle Cylinder (6010)Double Cylinder (6011)Dummy (6015)• Refer to page 95 for Door Thickness SpecificationsTRENTON STYLEPlates are 1 ⁄2” thick2 5 ⁄8”10 3 ⁄4”10 3 ⁄4”3 3 ⁄4”2 5 ⁄8”2 7 ⁄16”2 7 ⁄16”Non-KeyedPassage (8109)Privacy (8209)Dummy (8059)KeyedSingle Cylinder (6030)Double Cylinder (6031)Dummy (6035)• Refer to page 96 for Door Thickness Specifications89EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 90DECORATIVE PLATE LOCKSROPE STYLEPlates are 3 ⁄8” thick1 15 ⁄16”3 3 ⁄4”7 1 ⁄2”7 1 ⁄2”1 5 ⁄16”2 1 ⁄2”2 1 ⁄2”Non-KeyedPassage (7109)Privacy (7209)Dummy (7059)KeyedSingle Cylinder (7090)Double Cylinder (7091)Dummy (7095)2 1 ⁄4”9 5 ⁄8”9 1 ⁄2”3 9 ⁄16”2 1 ⁄16”2 1 ⁄2”2 1 ⁄2”Non-KeyedPassage (7710)Privacy (7810)Dummy (7850)KeyedSingle Cylinder (7990)Double Cylinder (7991)Dummy (7995)• Refer to page 95 for Door Thickness SpecificationsEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281290

2008 dimension 6/19/09 4:07 PM Page 91DECORATIVE PLATE LOCKS1 11 ⁄16”7 1 ⁄2”7 1 ⁄2”2 1 ⁄2”1 11 ⁄16”2 7 ⁄16”2 7 ⁄16”Non-KeyedPassage (8111)Privacy (8211)Dummy (8011)KeyedSingle Cylinder (8112)Double Cylinder (8212)Dummy (8012)1 3 ⁄4”9”9”3 1 ⁄4”1 3 ⁄4”2 7 ⁄16”2 7 ⁄16”Non-KeyedPassage (8113)Privacy (8213)Dummy (8013)KeyedSingle Cylinder (8114)Double Cylinder (8214)Dummy (8014)• Refer to page 95 for Door Thickness Specifications91EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 92DECORATIVE PLATE LOCKS#5 STYLEPlates are 1 ⁄2” thick2 1 ⁄4”4 5 ⁄8”7 1 ⁄4”8 1 ⁄8”2 1 ⁄4”2 7 ⁄16”2 7 ⁄16”Non-KeyedPassage (7107)Privacy (7207)Dummy (7057)KeyedSingle Cylinder (7070)Double Cylinder (7071)Dummy (7075)2 1 ⁄4”9 5 ⁄16”10”3 3 ⁄8”2 1 ⁄4”2 11 ⁄16”2 11 ⁄16”Non-KeyedPassage (7707)Privacy (7807)Dummy (7757)KeyedSingle Cylinder (7670)Double Cylinder (7671)Dummy (7675)• Refer to page 97 for Door Thickness SpecificationsEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281292

2008 dimension 6/19/09 4:07 PM Page 93DECORATIVE PLATE LOCKSRECTANGULAR STYLEPlates are 1 ⁄2” thick1 11 ⁄16”7”7”2 1 ⁄2”1 11 ⁄16”2 1 ⁄2”2 1 ⁄2”Non-KeyedPassage (71013)Privacy (72013)Dummy (70053)KeyedSingle Cylinder (7360)Double Cylinder (7361)Dummy (7365)1 11 ⁄16”8 7 ⁄8”8 7 ⁄8”3 7 ⁄16”1 11 ⁄16”2 1 ⁄2”2 1 ⁄2”Non-KeyedPassage (7512)Privacy (7612)Dummy (7552)KeyedSingle Cylinder (7560)Double Cylinder (7561)Dummy (7565)• Refer to page 97 for Door Thickness Specifications93EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 94DECORATIVE PLATE LOCKS#16 STYLEPlates are 5 ⁄8” thick8 1 ⁄4”Non-KeyedPassage (6102)Privacy (6202)Dummy (6052)8 1 ⁄4”2 5 ⁄16”KeyedSingle Cylinder (6020)Double Cylinder (6021)Dummy (6025)3 1 ⁄8”2 5 ⁄16”2 7 ⁄16”2 7 ⁄16”2 5 ⁄16”10 1 ⁄8”Non-KeyedPassage (6702)Privacy (6802)Dummy (6752)10 1 ⁄8”KeyedSingle Cylinder (6620)Double Cylinder (6621)Dummy (6625)3 1 ⁄8”2 5 ⁄16”2 7 ⁄16”2 7 ⁄16”• Refer to page 96 for Door Thickness SpecificationsWROUGHT STEEL #5 STYLEPlates are 1 ⁄2” thick7 1 ⁄8”Non-KeyedPassage (7105)Privacy (7205)Dummy (7055)7 1 ⁄8”1 3 ⁄4”KeyedSingle Cylinder (7010)Double Cylinder (7011)Dummy (7015)2 9 ⁄16”1 3 ⁄4”2 7 ⁄16”2 7 ⁄16”• Refer to page 96 & 97 for Door Thickness SpecificationsEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-281294

2008 dimension 6/19/09 4:07 PM Page 95Door Thickness SpecificationsBrass Non-Keyed Plates (passage/privacy)Colonial Style (8010/8020 & 8711/8811), Belmont Style (8102/8202), Quincy Style (8104/8204 & 8704/8804),Victoria Style (8103/8203), Oval Beaded Style (8105/8205),Rope Style (7109/7209 & 7710/7810), Modern Style (8111/8112 &8113/8213)• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• Full-Lip Strike Plate• Extended Door Thickness: 2”- 3”Extended Components:• Privacy Pin w/ Extensions (for privacy sets)• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• Extended Full-Lip Strike PlateBrass Keyed Plates, Single CylinderColonial Style (8060/8990), Belmont Style (8070), Quincy Style (8080/8980),Victoria Style (8090), Oval Beaded Style (6010),Rope Style (7090/7990), Modern Style (8112/8114)• Standard Door Thickness: 1 1 ⁄4”- 1 3 ⁄4”Standard Components:• Single Cylinder Tailpiece• Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 2 1 ⁄4” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 1 3 ⁄4”- 2 1 ⁄4”Extended Components:• Long Single Cylinder Tailpiece• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 2 1 ⁄2” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄4”- 2 3 ⁄4”Extended Components:• Extra Long Single Cylinder Tailpiece• Extra Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike PlateBrass Keyed Plates, Double CylinderColonial Style (8160/8991), Belmont Style (8071), Quincy Style (8081/8981),Victoria Style (8091), Oval Beaded Style (6011),Rope Style (7091/7991), Modern Style (8212/8214)• Standard Door Thickness: 1 5 ⁄8”- 1 3 ⁄4”Standard Components:• Double Cylinder Tailpiece• Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 3” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 1 3 ⁄4”- 2 1 ⁄2”Extended Components:• Long Double Cylinder Tailpiece• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 3 1 ⁄2” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike Plate95

2008 dimension 6/19/09 4:07 PM Page 96Door Thickness SpecificationsTrenton Keyed Plates, Single Cylinder (6030)• Standard Door Thickness: 1 5 ⁄8”- 2 1 ⁄8”Standard Components:• Single Cylinder Tailpiece• Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 2 1 ⁄4” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 1 3 ⁄4”- 2 3 ⁄4”Extended Components:• Long Single Cylinder Tailpiece• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 2 1 ⁄2” & 3” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike PlateTrenton Style (Brass), Keyed Plates, Double Cylinder (6031)• Standard Door Thickness: 1 5 ⁄8”- 2”Standard Components:• Double Cylinder Tailpiece• Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 2 1 ⁄2” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 5 ⁄8”Extended Components:• Long Double Cylinder Tailpiece• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 3” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike Plate* Part # DB4-COLLAR32 Available for 1 3 ⁄8” Thick DoorsWrought Steel Non-Keyed Plate (passage/privacy) (7105/7205)• Standard Door Thickness: 1 1 ⁄4”- 1 3 ⁄4”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• Full-Lip Strike Plate• Extended Door Thickness: 1 3 ⁄4”- 2 3 ⁄8”Extended Components:• Privacy Pin w/Extension (for privacy sets)• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• Extended Full-Lip Strike Plate• Extended Door Thickness: 1 3 ⁄4”- 2 3 ⁄8”Extended Components:• Privacy Pin w/Extension (for privacy sets)• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• Extended Full-Lip Strike PlateWrought Steel #5 Style Keyed Plates, Single Cylinder (7010)• Standard Door Thickness: 1 1 ⁄2”- 1 3 ⁄4”Standard Components:• Single Cylinder Tailpiece• Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 2 1 ⁄4” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 1 3 ⁄4”- 2 1 ⁄4”Extended Components:• Long Single Cylinder Tailpiece• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 2 1 ⁄2” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄4”- 2 3 ⁄4”Extended Components:• Extra Long Single Cylinder Tailpiece• Extra Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 3” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike Plate96

2008 dimension 6/19/09 4:07 PM Page 97Door Thickness SpecificationsWrought Steel #5 Keyed Plates, Double Cylinder (7011)• Standard Door Thickness: 1 5 ⁄8”- 1 3 ⁄4”Standard Components:• Double Cylinder Tailpiece• Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 3” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 1 3 ⁄4”- 2 3 ⁄8”Extended Components:• Long Double Cylinder Tailpiece• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 3 1 ⁄2” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike PlateCast Bronze Non-Keyed Plates (passage/privacy)#5 (7107/7207 & 7707/7807), Rectangular Style (71013/72013 & 7512/7612), #16 Style (6102/6202 & 6702/6802)• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• Full-Lip Strike Plate• Extended Door Thickness: 2”- 3”Extended Components:• Privacy Pin w/ Extensions (for privacy sets)• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• Extended Full-Lip Strike PlateCast Bronze Keyed Plates, Single Cylinder#5 (7070/7670), Rectangular Style (7360/7560), #16 Style (6020/6620)• Standard Door Thickness: 1 5 ⁄8”- 2”Standard Components:• Single Cylinder Tailpiece• Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 2 1 ⁄4” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 3 ⁄8”Extended Components:• Long Single Cylinder Tailpiece• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 2 1 ⁄2” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 3 ⁄8”- 3”Extended Components:• Extra Long Single Cylinder Tailpiece• Extra Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 3” & 3 1 ⁄2” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike PlateCast Bronze Keyed Plates, Double Cylinder#5 (7071/7671), Rectangular Style (7361/7561), #16 Style (6021/6621)• Standard Door Thickness: 1 1 ⁄2”- 2”Standard Components:• Single Cylinder Tailpiece• Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 2 1 ⁄2” Deadbolt Mounting Screws• Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• Long Double Cylinder Tailpiece• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 3” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄4”- 2 3 ⁄4”Extended Components:• Long Double Cylinder Tailpiece• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 3 1 ⁄2” Deadbolt Mounting Screws• Extended Full-Lip Strike Plate• Deadbolt Strike Plate97






2008 dimension 6/19/09 4:07 PM Page 103THUMBTURN PRIVACY LOCKSETThumbturn Privacy LocksetUsed with Emtek Brass Passage Lockset1 5 ⁄8”1 5 ⁄8”Thickness is 1 ⁄4”Projection: 1 5 ⁄16”1 1 ⁄4”1 1 ⁄4”ExteriorInterior• Standard Door Thickness: 1 1 ⁄2”- 2”Standard Components:• Modified Tailpiece• Privacy Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• Long Modified Tailpiece• Privacy Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• Extra Long Modified Tailpiece• Privacy Deadbolt Strike PlateThumbturn Privacy with Decorative Plate LockBelmont (8224), Colonial (8022), Victoria (8225), Quincy (8226), Rope (7211), Oval Beaded (8227)• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 1 1 ⁄2” Rosette Screws• Full-Lip Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• Extra Long Inside Passage Half Spindle• 1” Wood Screws• Threaded Tubes & Machine Screwssupplied upon request for Hollow-Core Doors• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate103EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812


2008 dimension 6/19/09 4:07 PM Page 105ROSETTE DIMENSIONS2 9 ⁄16”2 9 ⁄16”Forged Brass2 3 ⁄4” Dia. 2 3 ⁄4” Dia. 2 3 ⁄4” Dia. 2 3 ⁄4” Dia.2 1 ⁄2”7 ⁄16” Thick4 3 ⁄8”4 3 ⁄8”2 1 ⁄2”4 1 ⁄2”3 ⁄8” ThickRectangular #8 Regular Rope Ribbon & Reed Lancaster OvalArts & CraftsPorcelain2 1 ⁄2”1 ⁄2” Thick 2 3 ⁄4” 7 ⁄16” Thick 2 3 ⁄4” Dia. 7 ⁄16” Thick4”2 3 ⁄4”Arts & Crafts Rectangular2 3 1 ⁄4” Dia.⁄2” Thick3 ⁄8” ThickHammeredModern2 1 ⁄2” Dia. 2 7 ⁄16” Dia.3 ⁄8” ThickPorcelain2 1 ⁄2”3 ⁄8” Thick2 1 ⁄2”All 7 ⁄16” ThickModern Rosette2 1 ⁄2”Disk RosetteBeveled RosetteSandcast Bronze2 1 ⁄2”2 3 ⁄4” Dia.2 13 ⁄16”Square Rosette1 ⁄2” Thick4 1 ⁄2”3”4 1 ⁄2”4 1 ⁄2”#1 #2 #3Lost Wax Cast Bronze#4All 7 ⁄16” Thick2 1 ⁄2”2 5 ⁄8” Dia.2 3 ⁄8”2 1 ⁄2” Dia.2 3 ⁄4” Dia.4 1 ⁄2”3”4 1 ⁄2”All 3 ⁄8” Thick11 12 14 15 172 9 ⁄16”Wrought Steel2 5 ⁄8” Dia.2 9 ⁄16”• Same dimensions for doorbell buttons• Screw-to-Screw for rosette/doorbell buttons 1 5 ⁄8”4 3 ⁄8”4 3 ⁄8”105#1 #2 #3

2008 dimension 6/19/09 4:07 PM Page 106CLASSIC FORGED BRASS LEVERSETSComplete set includes Latch and Strike Plate1” Clearance2 1 ⁄4” Projection1 ⁄2” Clearance2” Projection1 1 ⁄8” Clearance2 7 ⁄8” Projection1 1 ⁄8”4 3 ⁄8”Cortina (C)4 1 ⁄2”Aireon (A)4 7 ⁄16”Rope (RL)1 1 ⁄4” Clearance2 1 ⁄4” Projection2” Clearance2 3 ⁄4” Projection1 7 ⁄8” Clearance2 1 ⁄4” Projection4 1 ⁄4”4 1 ⁄2”4 5 ⁄8”Rustic (R) Turino (T) Milano (M)• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike PlateDoor Thickness SpecificationsBrass Passage & Privacy Sets (Knobs & Levers)• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812106

2008 dimension 6/19/09 4:07 PM Page 107DESIGNER FORGED BRASS LEVERSETSComplete set includes Latch and Strike Plate2” Clearance3 1 ⁄4” Projection1” Clearance2 1 ⁄4” Projection2 1 ⁄4” Clearance2 3 ⁄4” Projection5 3 ⁄8”Lafayette (LB)4 3 ⁄4”Elan (EN)4 5 ⁄8”Santa Fe (SF)2 1 ⁄2” Clearance1 3 ⁄4” Projection1 ⁄2” Clearance2” Projection4 3 ⁄4”4 1 ⁄2”Ribbon & Reed (RBL)Wembley (WM)• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike PlateDoor Thickness SpecificationsBrass Passage & Privacy Sets (Knobs & Levers)• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike Plate107EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 108CLASSIC FORGED BRASS KNOBSETSComplete set includes Latch and Strike Plate2 1 ⁄2”2 3 ⁄4” Projection2 1 ⁄4” Dia.2 1 ⁄4” Projection2 3 ⁄8” Dia.2 1 ⁄4” Projection1 1 ⁄2”1” Stem1” Stem1” StemEgg (E) Waverly (W) Rope (RK)2 1 ⁄4” Dia.2 5 ⁄16” Dia.2 1 ⁄4”2 3 ⁄8” Projection2 3 ⁄8” Projection2 1 ⁄2” Projection1 1 ⁄2”1” Stem1” StemVictoria (V)Providence (P)Belmont (BT)2 3 ⁄8” Dia.2 7 ⁄8” Projection2 5 ⁄16”2 13 ⁄16” Projection1” Stem1 1 ⁄2”1” StemMelon (MN)Beaded Egg (BE)• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike PlateDoor Thickness SpecificationsBrass Passage & Privacy Sets (Knobs & Levers)• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 3”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812108

2008 dimension 6/19/09 4:07 PM Page 109MODERN COLLECTION - KNOB/LEVERSETSComplete set includes Latch and Strike Plate1 3 ⁄4” Clearance2 3 ⁄8” Projection1” Clearance2 1 ⁄8” Projection4 11 ⁄16”Basel (BA)5 9 ⁄32”Geneva (GV)2 1 ⁄4” Projection2”2 1 ⁄4” Dia.1” StemBern (BN)1” StemOctagon (OCT)2 1 ⁄2” Projection2 11 ⁄16” Projection2 1 ⁄4”2 5 ⁄8” Projection2 1 ⁄4”Dia.1” Stem2 1 ⁄4”Square (SQU)1” StemRound (ROU)• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike PlateDoor Thickness SpecificationsBrass Passage & Privacy Sets (Knobs & Levers)• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 3”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike Plate109EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 110MODERN COLLECTION - KNOB/LEVERSETSComplete set includes Latch and Strike Plate1 1 ⁄2” ClearanceHermes (HER)2 1 ⁄4” ProjectionClearance:1 3 ⁄8”4 5 ⁄8”Sion (SIO)Poseidon (POS)Kiel (KIE)Clearance:1 3 ⁄8”Hercules (HEC)Stuttgart (STU)• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike PlateDoor Thickness SpecificationsBrass Passage & Privacy Sets (Knobs & Levers)• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 3”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812110

2008 dimension 6/19/09 4:07 PM Page 111MODERN COLLECTION - BRASS AND GLASS LEVER AND KNOBSETSComplete set includes Latch and Strike Plate2 1 ⁄4” Projection1 1 ⁄2” Clearance2 3 ⁄4” Projection 2 3 ⁄4” Clearance4 3 ⁄4”Luzern (LU)3 7 ⁄8”Mode (MD)1 3 ⁄4” Clearance2 3 ⁄4” Projection2 7 ⁄8” Projection 1 3 ⁄4” Clearance5 1 ⁄8”Electra Blue (ECB)Electra Frost (ECF)5”Mercury (MC)2” Dia.2 1 ⁄4” Dia.2 3 ⁄4” Projection2 3 ⁄8” Projection1 ⁄2” StemOrb (OR)1” StemZurich Frost (ZF)Zurich Blue (ZB)Door Thickness Specifications• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 3”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike Plate111EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 112DESIGNER BRASS KNOBSETSComplete set includes Latch and Strike Plate2 7 ⁄16” Dia.2 3 ⁄4” ProjectionDog (DG)1” Stem2 1 ⁄4” Dia.2 7 ⁄16” Dia.2 1 ⁄8” Projection2 1 ⁄2” ProjectionRibbon & Reed (RBK)1” StemLancaster (LN)1” Stem2 1 ⁄2” Projection2 1 ⁄2” Projection2 5 ⁄16” Dia.Academia (AD)1” Stem2 5 ⁄16” Dia.Rialto (RT)1” StemDoor Thickness Specifications• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 3”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812112

2008 dimension 6/19/09 4:07 PM Page 113ARTS & CRAFTS KNOB AND LEVERSETSComplete set includes Latch and Strike Plate1 7 ⁄8” Clearance2” Clearance2 1 ⁄2” Projection2 1 ⁄2” Projection2 3 ⁄4” Projection2 1 ⁄2”4 3 ⁄8”4 3 ⁄8”1 1 ⁄2”1” Stem• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike PlateDoor Thickness SpecificationsBrass Passage & Privacy Sets (Knobs & Levers)• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 3”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike Plate113EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 114HARRISBURG LEVERSETS AND MADISON KNOBSETSWrought Steel Levers and Porcelain Knobs with Wrought Steel RosettesComplete set includes Latch and Strike Plate2 1 ⁄4” Dia.1 1 ⁄2” Clearance2 5 ⁄8” Projection2 3 ⁄8” Projection1” Stem5”Black Madison (MB)Harrisburg (HL)2 1 ⁄4” Dia.2 1 ⁄4” Dia.2 3 ⁄8” Projection2 3 ⁄8” Projection1” Stem1” StemBrown Swirl Madison (MS)Ivory Madison (IM)• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike PlateDoor Thickness SpecificationsWrought Steel Passage & Privacy Sets (Knobs & Levers)• Extended Door Thickness: 2”- 2 1 ⁄4” • Extended Door Thickness: 2 1 ⁄4”- 2 3 ⁄4”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812114

2008 dimension 6/19/09 4:07 PM Page 115WROUGHT STEEL KNOBS AND LEVERSETSComplete set includes Latch and Strike Plate1 1 ⁄2” Clearance3” Projection1 1 ⁄4” Stem6”2 5 ⁄8” ProjectionLafayette (L)2” Clearance2 3 ⁄4” Projection2 1 ⁄4” Dia.Jamestown (J)4 1 ⁄2”3 ⁄8” ThicknessNormandy (N)3 ⁄4” Stem2 3 ⁄8” Clearance3” Projection2 5 ⁄8” Projection2 1 ⁄2”1 1 ⁄2”Savannah (SV)4 3 ⁄4”San Carlos (SC)• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike PlateDoor Thickness SpecificationsWrought Steel Passage & Privacy Sets (Knobs & Levers)(includes porcelain knobs using steel rosettes)• Extended Door Thickness: 2”- 2 1 ⁄4” • Extended Door Thickness: 2 1 ⁄4”- 2 3 ⁄4”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike Plate115EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 116SANDCAST BRONZE KNOB AND LEVERSETSComplete set includes Latch and Strike Plate1 3 ⁄4” Clearance2 5 ⁄16” Dia.3” Projection2 3 ⁄4”3” Projection2 3 ⁄4” Projection1 1 ⁄8” Stem1 1 ⁄2”Bronze Egg (BZE)5”Durango (D)1 1 ⁄2” StemButte (BU)1 3 ⁄8” Clearance2 3 ⁄4” Projection1 9 ⁄32” Clearance2 3 ⁄8” Projection2 3 ⁄8” Dia.2 3 ⁄4” Projection1 1 ⁄4” Stem5”Cody (CD)4 7 ⁄8”Teton (TT)Winchester (WC)1 9 ⁄16” Clearance2 3 ⁄8” Projection2 13 ⁄16”2 3 ⁄8” Projection1 9 ⁄16” Clearance2 7 ⁄16” Projection1 5 ⁄8” Clearance13 ⁄16” Thick4 1 ⁄2”13 ⁄16” Thick3 ⁄4” Thick4 7 ⁄8”Montrose (MT)Rosette Thickness: 1 ⁄2”4 7 ⁄8”Cimarron (CR)5 1 ⁄8”Aurora (AR)• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike PlateDoor Thickness SpecificationsCast Bronze Passage & Privacy Sets (Knobs & Levers)• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle• 2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• Privacy Pin w/ Extension (for privacy sets)• Extra Long Inside Passage Half Spindle• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812116

2008 dimension 6/19/09 4:07 PM Page 117LOST WAX CAST BRONZE KNOB AND LEVERSETSComplete set includes Latch and Strike Plate2 3 ⁄8” Projection2 1 ⁄2”2 5 ⁄8” Projection1 1 ⁄2” Clearance7 ⁄8” Stem1 1 ⁄2”Parma (PA)4 1 ⁄2”Napoli (NA)2 11 ⁄32” Dia.2 5 ⁄8” Projection1 3 ⁄8” Clearance2 7 ⁄8” Projection1 3 ⁄4”1” Stem4 3 ⁄4”Art Nouveau (ANK)Padua (PD)2 1 ⁄4” Dia.1 1 ⁄2” Clearance2 1 ⁄4” Projection2 7 ⁄8”Projection1 5 ⁄16” Stem4 5 ⁄8”Octagon (OCK)Art Nouveau (ANL)Door Thickness SpecificationsCast Bronze Passage & Privacy Sets (Knobs & Levers)• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike Plate117EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 118LOST WAX CAST BRONZE KNOB AND LEVERSETSComplete set includes Latch and Strike Plate2 1 ⁄4” Dia.2 5 ⁄8” Projection2 5 ⁄8” Projection1 7 ⁄8” Clearance1” Stem4 7 ⁄8”Petal (PT)Dakota (DK)1 3 ⁄4” Clearance2 3 ⁄4” Projection2 1 ⁄4” Projection1 3 ⁄8” Clearance4 13 ⁄16”Medici (MDI)4 1 ⁄2”Octagon (OCL)• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike PlateDoor Thickness SpecificationsCast Bronze Passage & Privacy Sets (Knobs & Levers)• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812118

2008 dimension 6/19/09 4:07 PM Page 119PORCELAIN KNOBSETS WITH BRASS AND PORCELAIN ROSETTESComplete set includes Latch and Strike Plate2 3 ⁄8” Dia.2 3 ⁄8” Dia.2 3 ⁄8” Dia.2 3 ⁄8” Dia.2 1 ⁄4” Projection2 1 ⁄4” Projection2 1 ⁄4” Projection2 1 ⁄4” Projection1 1 ⁄4” Stem1 1 ⁄4” Stem1 1 ⁄4” Stem1 1 ⁄4” StemIce White (IW) Bedford (BD) Courtney (CTY)Devonshire (DV)2 3 ⁄8” Dia.2 1 ⁄4” Projection2 3 ⁄8” Dia.2 3 ⁄8” Dia. 2 1 ⁄4” Projection2 3 ⁄8” Dia.2 1 ⁄4” Projection2 1 ⁄4” Projection1 1 ⁄4” Stem1 1 ⁄4” Stem1 1 ⁄4” Stem1 1 ⁄4” StemEbony (EB)Olde Gold (OG)Stoneware (ST)Almond (AL)Door Thickness SpecificationsBrass Passage & Privacy Sets (Knobs & Levers)(includes crystal & porcelain knobs using brass rosettes)• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 3”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike Plate119EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 120CRYSTAL KNOBSETSComplete set includes Latch and Strike Plate2” Dia.2 3 ⁄16” Dia.2 1 ⁄4” Dia.2 1 ⁄4” Dia.2 5 ⁄8” Projection2 3 ⁄16” Projection2 3 ⁄4” Projection2 3 ⁄4” Projection11 ⁄16” Stem1 1 ⁄4” Stem11 ⁄16” Stem11 ⁄16” StemAstoria - Clear (AS)Diamond Crystal - Clear (CK)Old Town - Clear (OT)Old Town - Milk (OT)2” Dia.2 1 ⁄4” Dia.2 1 ⁄4” Dia.2 5 ⁄8” Projection2 3 ⁄4” Projection2 3 ⁄4” Projection11 ⁄16” Stem11 ⁄16” Stem11 ⁄16” StemAstoria - Emerald (ASE)Old Town - Amber (OT)Old Town - Violet (OTV)• Standard Door Thickness: 1 1 ⁄4”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Rosette Screws• Full-Lip Strike PlateDoor Thickness SpecificationsBrass Passage & Privacy Sets (Knobs & Levers)(includes crystal & porcelain knobs using brass rosettes)• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 3”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Extra Long Inside Passage Half Spindle• 2” Rosette Screws• 2 1 ⁄2” Rosette Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812120





2008 dimension 6/19/09 4:07 PM Page 125STAINLESS STEEL ENTRANCE HANDLESETS2 7 ⁄8”2 1 ⁄16”2 5 ⁄8”2 7 ⁄8”10 1 ⁄4” 10 1 ⁄4”2 3 ⁄8”Standard interior trimPart # S40001/S40002/4814/48242”1 1 ⁄2”Zeus StylePart #S40001/S40002/4814/4824Additional Dimensions: (Part # S40001/S40002)• Exterior Projection is 2 1 ⁄2”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 1 ⁄16”• Clearance between door & grip ranges 1” - 1 3 ⁄8”• Plates thickness: 7 ⁄16”• Refer to the following page for Door Thickness Specifications• Same dimensions for dummy function125EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 126STAINLESS STEEL ENTRYSET SPECIFICATIONSDoor Prep Specifications:• Fits standard door prep--2 1 ⁄8” face bore & 1” edge bore.• Fits a range of door thickness from 1 3 ⁄8” to 2”. (2 1 ⁄4”- 2 3 ⁄4”, Please specify)• 5 1 ⁄2” Center to Center spacing.Latches:Passage:• 28º retraction• 7MM hub• Split spindles• 2 3 ⁄8” backset standard• 2 3 ⁄4” backset available--please specify• Stainless steel noseboltDeadbolt:• Hardened Steel Bolt• 2 3 ⁄8” backset standard• 2 3 ⁄4” backset available--please specifyStrike & Face Plates:• Full Lip strike is standard (passage function)• “T” strike optional--please specify (passage function)• Strike & faceplates are square corneredLegend1) Passage Latch2) Deadbolt Latch3) Outside Handle Plate4) Inside Plate5) Deadbolt Mounting Plate6) Deadbolt Machine Screws7) Inside Spindle8) Inside Plate Machine Screws9) Decorative Cap10) Handle Grip Machine Screw11) Designer Washer12) Latch Face Plate13) Latch Wood Screws14) Deadbolt Cylinder• Passage: Strike Plate--1 1 ⁄2”W x 2 1 ⁄4”H, Deadbolt:1 1 ⁄8”W x 2 3 ⁄4”H (understrike supplied)• Passage: Face Plate--1”W x 2 1 ⁄4”H, Deadbolt:1”W x 2 1 ⁄4”H (attached to latch)EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812126




2008 dimension 6/19/09 4:07 PM Page 130STAINLESS STEEL DEADBOLTSRound DeadboltSingle CylinderPart # S50001Round DeadboltDouble CylinderPart # S50002Square DeadboltSingle CylinderPart # S50003Square DeadboltDouble CylinderPart # S50023EPITOME Round & Square Deadbolts, Single CylinderRound (S50001) & Square (S50003)• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Single Cylinder Tailpiece• 2 1 ⁄4” Socket Head Machine Screws• Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• Long Cylinder Tailpiece• 2 1 ⁄2” & 3” Socket Head Machine Screws• Deadbolt Strike Plate• Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:• Extra Long Cylinder Tailpiece• 3 1 ⁄2” Socket Head Machine Screws• Deadbolt Strike PlateEPITOME Round & Square Deadbolts, Double CylinderRound (S50002) & Square (S50023)• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Double Cylinder Tailpiece• 2 1 ⁄4” Socket Head Machine Screws• Deadbolt Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2”Extended Components:• Long Double Cylinder Tailpiece• 3” Socket Head Machine Screws• Deadbolt Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812130

2008 dimension 6/19/09 4:07 PM Page 131EPITOME DEADBOLT SPECIFICATIONSDoor Prep Specifications:• Fits standard door prep--2 1 ⁄8” face bore & 1” edge bore.• Fits a range of door thickness from 1 3 ⁄8” to 2”. Thicker doors--please specify.Single Cylinder DeadboltLegend1) Deadbolt Cylinder2) Outside Rosette3) Deadbolt Latch4) Inside Rosette with Thumbturn5) Socket Head Machine Screws6) Deadbolt Ring (for Thinner Doors)7) Latch Wood ScrewsDouble Cylinder DeadboltLegend1) Outside Double Deadbolt Cylinder2) Outside Rosette3) Outside Deadbolt Ring (for ThinnerDoors)4) Deadbolt Latch5) Inside Deadbolt Ring (for ThinnerDoors)6) Inside Rosette7) Inside Double Deadbolt Cylinder8) Socket Head Machine Screws9) Latch Wood ScrewsLatches:Deadbolt:• Hardened Steel Bolt• 2 3 ⁄8” backset standard• 2 3 ⁄4” backset available--please specify• Heavy gauge steel understrike and brasstrim strike suppliedStrike & Face Plates:• Strike & faceplates are square cornered• Strike Plate-- 1 1 ⁄8”W x 2 3 ⁄4”H• Face Plate-- 1”W x 2 1 ⁄4”H (attached to latch)• Understrike Plate--1 1 ⁄8”W x 2 3 ⁄4”H• See page 17 for detailed diagram131EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812




2008 dimension 6/19/09 4:07 PM Page 135STAINLESS STEEL LEVERSETSCologne (CO)Stuttgart (ST)Kiel (KL)Achilles (AC)Door Thickness Specifications• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Socket Head Machine Screws• Full-Lip Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Long Inside Passage Half Spindle• 2” Socket Head Machine Screws • 2 1 ⁄2” Socket Head Machine Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike Plate135EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 136STAINLESS STEEL LEVERSETSAthena (AT)Ajax (AJ)Hercules (HS)Poseidon (PO)Hermes (HE)• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Socket Head Machine Screws• Full-Lip Strike PlateDoor Thickness Specifications• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Long Inside Passage Half Spindle• 2” Socket Head Machine Screws • 2 1 ⁄2” Socket Head Machine Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812136

2008 dimension 6/19/09 4:07 PM Page 137STAINLESS STEEL LEVER & KNOBSETSComet (CT)Meteor (MT)2 1 ⁄2” Projection2 11 ⁄16” Projection1” Stem2 1 ⁄4” Dia.1” Stem2 1 ⁄4” Dia.Octagon Knob (OK)Round Knob (RK)Door Thickness Specifications• Standard Door Thickness: 1 3 ⁄8”- 2”Standard Components:• Privacy Pin (for privacy sets)• Inside Passage Half Spindle• 1 1 ⁄2” Socket Head Machine Screws• Full-Lip Strike Plate• Extended Door Thickness: 2”- 2 1 ⁄2” • Extended Door Thickness: 2 1 ⁄2”- 2 3 ⁄4”Extended Components:Extended Components:• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)• Long Inside Passage Half Spindle • Long Inside Passage Half Spindle• 2” Socket Head Machine Screws • 2 1 ⁄2” Socket Head Machine Screws• Extended Full-Lip Strike Plate• Extended Full-Lip Strike Plate137EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 138STAINLESS STEEL LEVERSET SPECIFICATIONSFunctions:Passage: Lever operates from either side of door.Privacy: Push button on the interior engages privacy. Turning the inside lever releasesprivacy and retracts latchbolt.Dummy Pair: Surface mounted on threaded spindle. Requires no door prep.Door Prep Specifications:• Fits standard door prep--2 1 ⁄8” face bore & 1” edge bore.• Fits a range of door thickness from 1 3 ⁄8” to 2”. Thicker doors--please specify.Privacy Function ShownLatches:• 28º retraction• 7MM hub• Split spindles• 2 3 ⁄8” backset standard• 2 3 ⁄4” backset available--please specify• Stainless steel noseboltStrike & Face Plates:• Strike Plate--1 1 ⁄2”W x 2 1 ⁄4”H• Face Plate--1”W x 2 1 ⁄4”H• Full Lip strike is standard• “T” strike optional--please specify• Strike & faceplates are square corneredLegend1) Latch (Passage/Privacy)2) Lever Handles3) Spindles4) Face Plate Wood Screws5) Socket Hex Head Machine Screws6) Inside Rosette7) Privacy Pin (for Privacy Sets)8) Outside Rosette9) Set Screws10) Spindle Spring11) Latch Face PlateEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812138



2008 dimension 6/19/09 4:07 PM Page 141STAINLESS STEEL LATCH & STRIKE SPECIFICATIONSPRIVACY LATCHPASSAGE LATCH“Full Lip” StrikeStandard“T” StrikeOptionalFaceplateTo reverse nose bolt, turn faceplateDEADBOLTUnderstrike Trim Strikeplate Faceplate141EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 142STAINLESS STEEL BATH HARDWARETowel Bar 18”-- S7010SSTowel Bar 24”-- S7020SSTowel Bar 30”-- S7030SSTowel Ring -- S7300SSBar Style Paper Holder -- S7210SSSpring Rod Paper Holder -- S7220SSRobe Hook with Disk Rosette -- S7100SSEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812142




2008 dimension 6/19/09 4:07 PM Page 146STAINLESS STEEL CABINET PULLSKnob (T-Pull), 2”Pull with Two Legs, 3” thru 36”Pull with Three Legs, 46” thru 54”Specification DrawingA. B. C.Spec.DescriptionDrawingProduct Code Center to Center Overall LengthCabinet Knob AS62001SS2”Cabinet Pull,3” BS62002SS 3”5”Cabinet Pull,3 1 ⁄2” BS62003SS 3 1 ⁄2” 5 1 ⁄2”Cabinet Pull,4” BS62004SS 4”6 1 ⁄2”Cabinet Pull,5” BS62005SS 5”7 1 ⁄2”Cabinet Pull,6” BS62006SS 6”8 1 ⁄2”Cabinet Pull,8” BS62007SS 8”10 1 ⁄2”Cabinet Pull,10” BS62008SS 10”12 1 ⁄2”Cabinet Pull,12” BS62009SS 12”14 1 ⁄2”Cabinet Pull,16” BS62010SS 16”18 1 ⁄2”Cabinet Pull,24” BS62011SS 24”26 1 ⁄2”Cabinet Pull,28” BS62012SS 28”30 1 ⁄2”Cabinet Pull,32” BS62013SS 32”34 1 ⁄2”Cabinet Pull,36” BS62014SS 36”38 1 ⁄2”Cabinet Pull,46” CS62015SS 46”48 1 ⁄2”Cabinet Pull,54” CS62016SS 54”56 1 ⁄2”*Each pull packed with two sets of screws (1 1 ⁄8” & 1 1 ⁄2” , 8” - 32”)EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812146

2008 dimension 6/19/09 4:07 PM Page 147STAINLESS CABINET PULLSDelta Pull 3”Delta Pull 3.5”Delta Pull 4”S60030SSS60035SSS60040SSDome KnobS61113SSMushroom KnobS61213SS147EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 148BRASS TRAIL PULLSAll Projections are 1 3 ⁄8”11 ⁄16”11 ⁄16”Brass Trail Pull, 3 1 ⁄2”Brass Trail Pull, 6 1 ⁄2”Brass Trail Pull, 12 1 ⁄2”Description Product Code Overall LengthTrail Pull3” C-to-CTrail Pull3 1 ⁄2” C-to-CTrail Pull4” C-to-CTrail Pull6” C-to-CTrail Pull8” C-to-CTrail Pull12” C-to-C8616186162861638616486165861663 1 ⁄2”4”4 1 ⁄2”6 1 ⁄2”8 1 ⁄2”12 1 ⁄2”EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812148

2008 dimension 6/19/09 4:07 PM Page 149BRASS CABINET PULLSAll Items Are Solid Forged BrassAll 3 ⁄4” thickAll 7 ⁄16” thick1 1 ⁄2”ARope Pull• 3” Pull *(86125): A= 3 1 ⁄2”• 3 1 ⁄2” Pull *(86126): A= 4”• 4” Pull *(86127): A= 4 1 ⁄2”*Sizes are measured screw to screwProjection = 1 7 ⁄32”Clearance = 7 ⁄8”ASpindle Pull• 3” Pull *(86128): A= 3 5 ⁄8”• 3 1 ⁄2” Pull *(86129): A= 4 1 ⁄8”• 4” Pull *(86130): A= 4 5 ⁄8”*Sizes are measured screw to screwProjection = 1 1 ⁄8”Clearance = 1”5 1 ⁄4”Cup Pull (86173)Projection = 1 7 ⁄16”Clearance = 1 3 ⁄16”3” Screw-to-ScrewAll 5 ⁄16” thickDBC1 5 ⁄16”AWire Pull• 3” Pull *(86131): A= 3 5 ⁄16”• 3 1 ⁄2” Pull *(86132): A= 3 13 ⁄16”• 4” Pull *(86133): A= 4 5 ⁄16”*Sizes are measured screw to screwProjection = 1 1 ⁄4”Clearance = 15 ⁄16”AFooted Pull• 3” Pull *(86134): A= 5 1 ⁄8”, B= 1 5 ⁄16”, C= 3 ⁄4”, D= 9 ⁄16”• 3 1 ⁄2” Pull *(86135): A= 5 5 ⁄8”, B= 1 5 ⁄16”, C= 7 ⁄8”, D= 5 ⁄8”• 4” Pull *(86136): A= 6 1 ⁄8”, B= 1 5 ⁄16”, C= 7 ⁄8”, D= 5 ⁄8”*Sizes are measured screw to screwProjection = 1”Clearance = 11 ⁄16”4 1 ⁄4”Cup Pull (86123)Projection = 1 1 ⁄8”Clearance = 3 ⁄4”3” Screw-to-ScrewMODERN CABINET HARDWAREAll 3 ⁄8” thickA1 1 ⁄8” Dia.AArch Drawer Pull• 3” Pull *(86153): A= 4 13 ⁄16”• 3 1 ⁄2” Pull *(86154): A= 5 5 ⁄16”• 4” Pull *(86155): A= 5 13 ⁄16”*Sizes are measured screw to screwProjection = 1 3 ⁄16”Clearance = 13 ⁄16”BModern Finger PullSmall (86150): A=1”, B= 7 ⁄8”Large (86151): A=1 1 ⁄4”, B=1”1” Dia.Modern Cabinet Globe KnobPart #: (86152)Projection: 1 5 ⁄8”Stem Diameter: 1 ⁄2”149EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 150BRASS CABINET AND WARDROBE KNOBSAll Items Are Solid Forged BrassBAAA1 ⁄2” Dia.Egg Cabinet Knob Providence Cabinet Knob Rope Cabinet Knob• 1” Cab. Knob (86015): A= 3 ⁄4”, B= 1 ⁄2”Projection: 1 1 ⁄8”, Clearance= 1 ⁄2”• 1 1 ⁄4” Cab. Knob (86016): A= 3 ⁄4”, B= 9 ⁄16”Projection: 1 1 ⁄4”, Clearance= 9 ⁄16”• 1 3 ⁄4” Wrd. Knob (86124): A= 1”, B= 13 ⁄16”Projection: 1 5 ⁄8”, Clearance= 3 ⁄4”• 1” Cab. Knob (86013): A= 5 ⁄8”Projection: 1”, Clearance= 7 ⁄16”• 1 1 ⁄4” Cab. Knob (86014): A= 5 ⁄8”Projection: 1 3 ⁄16”, Clearance= 9 ⁄16”• 1 3 ⁄4” Wrd. Knob (86027): A= 13 ⁄16”Projection: 1 1 ⁄2”, Clearance= 7 ⁄8”• 1” Cab. Knob (86112): A= 5 ⁄8”Projection: 1”, Clearance= 5 ⁄8”• 1 1 ⁄4” Cab. Knob (86113): A= 5 ⁄8”Projection: 1 3 ⁄16”, Clearance= 11 ⁄16”AAAWaverly Cabinet Knob Melon Cabinet Knob Hexagon Cabinet Knob• 1” Cab. Knob (86114): A= 5 ⁄8”Projection: 1 1 ⁄16”, Clearance= 11 ⁄16”• 1 1 ⁄4” Cab. Knob (86115): A= 5 ⁄8”Projection: 1 1 ⁄8”, Clearance= 11 ⁄16”• 1” Cab. Knob (86121): A= 3 ⁄4”Projection: 1”, Clearance= 1 ⁄2”• 1 1 ⁄4” Cab. Knob (86122): A= 13 ⁄16”Projection: 1 3 ⁄8”, Clearance= 3 ⁄4”• 1 1 ⁄8” Cab. Knob (86119): A= 3 ⁄4”Projection: 1”, Clearance= 1 ⁄2”• 1 3 ⁄8” Cab. Knob (86120): A= 7 ⁄8”Projection: 1 3 ⁄8”, Clearance= 3 ⁄4”DOG CABINET KNOBSChihuahua (86107)Dachshund (86108)German Shepherd(86109)Labrador (86110)Beagle (86111)Projection = 1 5 ⁄8” Clearance = 3 ⁄4” Base = 3 ⁄4” DiameterEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812150

2008 dimension 6/19/09 4:07 PM Page 151ARTS & CRAFTS STYLE CABINET HARDWAREAll Items Are Solid Brass2 1 ⁄2”1 3 ⁄4”1 3 ⁄16”1 1 ⁄2”1 3 ⁄16”3 1 ⁄2”3”Hammered Oval Pull (86041)Projection = 1 ⁄2”Ring = 5 ⁄16” thick1 3 ⁄4”Hammered Ring Pull (86040)Projection = 1 ⁄2”Ring = 5 ⁄16” thick1 1 ⁄4”Hammered Vertical Ring Pull (86042)Projection = 1 ⁄2”Ring = 5 ⁄16” thick5 ⁄8”13 ⁄16”1 5 ⁄16”AA3 1 ⁄2”Tenon & Mortise PullHammered Pull Bin Pull (46049)• 3” Pull *(86043): A= 3 3 ⁄8”• 3 1 ⁄2” Pull *(86044): A= 3 7 ⁄8”• 4” Pull *(86045): A= 4 3 ⁄8”*Sizes are measured screw to screwProjection = 1 1 ⁄8”Clearance = 3 ⁄4”• 3” Pull *(86046): A= 3 7 ⁄8”• 3 1 ⁄2” Pull *(86047): A= 4 7 ⁄8”• 4” Pull *(86048): A= 4 7 ⁄8”*Sizes are measured screw to screwProjection = 1 1 ⁄16”Clearance = 3 ⁄4”Projection = 7 ⁄8”Clearance = 13 ⁄16”3” from screw to screw3 ⁄4”ARound Dimpled Knob (86037)Projection = 1”Clearance = 3 ⁄4”Square Dimpled Knob• 1” Cab. Knob (86038) : A= 5 ⁄8”Projection = 3 ⁄4”, Clearance = 9 ⁄16”• 1 1 ⁄4” Cab. Knob (86039) : A= 3 ⁄4”Projection = 15 ⁄16”, Clearance = 3 ⁄4”151EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 152WROUGHT STEEL CABINET HARDWARE15 ⁄16”AA2”ALafayette Fixed Drawer PullSatin Steel7 ⁄8”Lafayette Drop Drawer PullFlat Black9 ⁄16”San Carlos Fixed Drawer PullRust• 3” Pull *(76025): A= 3 7 ⁄16”• 3 1 ⁄2” Pull *(76019): A= 3 15 ⁄16”• 4” Pull *(76020): A= 4 7 ⁄16”*Sizes are measured screw to screwProjections: 1 1 ⁄4”Clearance = 15 ⁄16”• 4” Pull *(76032): A= 4 11 ⁄16”• 5” Pull *(76033): A= 5 3 ⁄4”• 6” Pull *(76034): A= 6 5 ⁄8”*Sizes are measured screw to screwProjection = 13 ⁄16”Clearance = 1 3 ⁄8”• 3” Pull *(76026): A= 3 5 ⁄16”• 3 1 ⁄2” Pull *(76021): A= 3 13 ⁄16”• 4” Pull *(76022): A= 4 5 ⁄16”*Sizes are measured screw to screwProjections: 1 5 ⁄16”Clearance = 1”AAA1 7 ⁄16”9 ⁄16”5 ⁄8”1 5 ⁄8”5 ⁄8”San Carlos Drop Drawer PullFlat BlackNormandy Fixed Drawer PullSatin SteelNormandy Drop Drawer PullFlat Black• 4” Pull *(76038): A= 4 1 ⁄2”• 5” Pull *(76039): A= 5 1 ⁄2”• 6” Pull *(76040): A= 6 1 ⁄2”*Sizes are measured screw to screwProjections: 13 ⁄16”Clearance = 1 3 ⁄8”• 3” Pull *(76027): A= 3 7 ⁄16”• 3 1 ⁄2” Pull *(76023): A= 3 15 ⁄16”• 4” Pull *(76024): A= 4 7 ⁄16”*Sizes are measured screw to screwProjections: 1 5 ⁄16”Clearance = 1”• 4” Pull *(76035): A= 4 1 ⁄2”• 5” Pull *(76036): A= 5 1 ⁄2”• 6” Pull *(76037): A= 6 1 ⁄2”*Sizes are measured screw to screwProjections: 13 ⁄16”Clearance = 1 3 ⁄8”EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812152

2008 dimension 6/19/09 4:07 PM Page 153WROUGHT STEEL CABINET HARDWAREAFlanders Cabinet Knob• 1 1 ⁄4” Cab. Knob (76011): A= 5 ⁄8”Projection: 1 15 ⁄16”, Clearance= 7 ⁄16”• 1 1 ⁄2” Cab. Knob (76012): A= 3 ⁄4”Projection: 2 1 ⁄8”, Clearance= 7 ⁄16”APetal Cabinet Knob• 1” Cab. Knob (76013): A= 9 ⁄16”Projection: 1 3 ⁄16”, Clearance= 5 ⁄8”• 1 1 ⁄4” Cab. Knob (76014): A= 3 ⁄4”Projection: 1 3 ⁄8”, Clearance= 11 ⁄16”ABrittany Cabinet Knob• 1” Cab. Knob (76015): A= 9 ⁄16”Projection: 1 3 ⁄16”, Clearance= 5 ⁄8”• 1 1 ⁄4” Cab. Knob (76016): A= 3 ⁄4”Projection: 1 3 ⁄8”, Clearance= 11 ⁄16”BABastogne Cabinet Knob• 2 3 ⁄8” Cab. Knob (76017): A= 3 ⁄8”, B= 7 ⁄8”Projection: 1 1 ⁄2”, Clearance= 5 ⁄8”• 3 3 ⁄8” Cab. Knob (76018): A= 1 ⁄2”, B= 1 3 ⁄16”Projection: 1 7 ⁄8”, Clearance= 3 ⁄4”153EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 154SANDCAST BRONZE CABINET HARDWAREAll Items Are Solid Cast BronzeBABronze Egg Knob• 1” Cab. Knob (86052): A= 1 ⁄2”, B= 7 ⁄8”Projection: 1 3 ⁄16”, Clearance= 11 ⁄16”• 1 1 ⁄4” Cab. Knob (86053): A= 1 ⁄2”, B= 15 ⁄16”Projection: 1 5 ⁄8”, Clearance= 3 ⁄4”ASquare Cabinet Knob• 1” Cab. Knob (86145): A= 1 ⁄2”Projection: 1”, Clearance= 5 ⁄8”• 1 5 ⁄8” Cab. Knob (86146): A= 5 ⁄8”Projection: 1 3 ⁄16”, Clearance= 3 ⁄4”ABronze Round Knob• 1” Cab. Knob (86057): A= 1 ⁄2”Projection: 1”, Clearance= 1 ⁄2”• 1 1 ⁄4” Cab. Knob (86058): A= 1 ⁄2”Projection: 1 1 ⁄8”, Clearance= 5 ⁄8”• 1 3 ⁄4” Wrd. Knob (86117): A= 5 ⁄8”Projection: 1 1 ⁄4”, Clearance= 3 ⁄4”1 5 ⁄16”Bronze Bin Pulls (86051)Projection = 1”Clearance = 13 ⁄16”3” from screw to screw3 1 ⁄2”7 ⁄8”Bronze Bin Pulls (86050)Projection = 1 5 ⁄16”Clearance = 1 1 ⁄16”3” from screw to screwB4 9 ⁄16”3 ⁄8”ATwig Pulls• 3” Pull *(86061): A= 4”, B= 1”• 3 1 ⁄2” Pull *(86062): A= 4 9 ⁄16”, B= 3 ⁄8”• 4” Pull *(86063): A= 5”, B= 3 ⁄8”*Sizes are measured screw to screwProjections: 1 1 ⁄4”Clearance = 13 ⁄16”Bronze Rod PullsB • 3” Pull *(86054): A= 4”, B= 1”5 ⁄16”A• 3 1 ⁄2” Pull *(86055): A= 4 1 ⁄2”, B= 1”• 4” Pull *(86056): A= 5”, B= 1”*Sizes are measured screw to screwProjections: 1 1 ⁄4”Clearance = 15 ⁄16”EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812154

2008 dimension 6/19/09 4:07 PM Page 155LOST WAX CAST BRONZE CABINET HARDWAREA B AATuscany Round Knob• 1” Cab. Knob (86091): A= 5 ⁄8”Projection: 1 1 ⁄8”, Clearance= 5 ⁄8”• 1 1 ⁄4” Cab. Knob (86092): A= 11 ⁄16”Projection: 1 1 ⁄4”, Clearance= 5 ⁄8”• 1 3 ⁄4” Wrd. Knob (86116): A= 13 ⁄16”Projection: 1 1 ⁄2”, Clearance= 3 ⁄4”Tuscany Egg Knob• 1” Cab. Knob (86093): A= 5 ⁄8”, B= 5 ⁄8”Projection: 1 1 ⁄8”, Clearance= 5 ⁄8”• 1 1 ⁄4” Cab. Knob (86094): A= 3 ⁄4”, B= 13 ⁄16”Projection: 1 1 ⁄4”, Clearance= 5 ⁄8”• 1 3 ⁄4” Wrd. Knob (86143): A= 13 ⁄16”, B= 1 1 ⁄8”Projection: 1 1 ⁄2”, Clearance= 5 ⁄8”Tuscany Petal Knob• 1” Cab. Knob (86095): A= 5 ⁄8”Projection: 1 1 ⁄16”, Clearance= 11 ⁄16”• 1 1 ⁄4” Cab. Knob (86096): A= 3 ⁄4”Projection: 1 1 ⁄16”, Clearance= 11 ⁄16”AA1 5 ⁄8”Octagon Knob• 1” Cab. Knob (86137): A= 3 ⁄4”Projection: 1 1 ⁄16”, Clearance= 1 ⁄2”• 1 1 ⁄4” Cab. Knob (86138): A= 13 ⁄16”Projection: 1 1 ⁄4”, Clearance= 5 ⁄8”BArt Nouveau Knob• 1 1 ⁄4” Cab. Knob (86139): A= 1 ⁄2”Projection: 1 1 ⁄8, Clearance= 3 ⁄4”3 ⁄4”1 ⁄2”4 7 ⁄16”Tuscany Bin PullPart #: (86199)Projection = 1 7 ⁄16”Clearance = 1 3 ⁄16”3” from screw to screw1 3 ⁄8”ATuscany Twist Pull• 1 3 ⁄4” Pull (86097): A= 3 ⁄4”, B= 9 ⁄16”Projections: 1 1 ⁄4”, Clearance = 11 ⁄16”• 3” Pull (86098): A= 13 ⁄16”, B= 9 ⁄16”Projections: 1 5 ⁄8”, Clearance = 15 ⁄16”11 ⁄16”Art Nouveau Pull• 3” Pull *(86140): A= 3 3 ⁄4”• 3 1 ⁄2” Pull *(86141): A= 4 1 ⁄4”• 4” Pull *(86142): A= 4 3 ⁄4”*Sizes are measured screw to screwProjections: 1 5 ⁄16”Clearance = 3 ⁄4”3 1 ⁄2”Tuscany Bin PullPart #: (86099)Projection = 1 1 ⁄8”Clearance = 7 ⁄8”3” from screw to screw11 ⁄16”7 ⁄16” 1 ⁄2”155ATuscany Ribbed Pull• 3” Pull *(86100): A= 3 11 ⁄16”• 3 1 ⁄2” Pull *(86101): A= 4 1 ⁄8”• 4” Pull *(86102): A= 4 11 ⁄16”*Sizes are measured screw to screwProjections: 1 1 ⁄78Clearance = 11 ⁄16”ATuscany Twist Pull• 3” Pull *(86103): A= 3 11 ⁄16”• 3 1 ⁄2” Pull *(86104): A= 4 1 ⁄8”• 4” Pull *(86105): A= 4 11 ⁄16”*Sizes are measured screw to screwProjections: 1 1 ⁄4”Clearance = 3 ⁄4”EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 156PORCELAIN & GLASS CABINET HARDWAREPorcelain 1 3 ⁄8” DiameterIce WhiteOlde GoldStonewareAlmondDevonshireBedfordCourtneyEbonyAMadison IvoryCabinet and Wardrobe Knobs• 1” Cab. Knob (86071, 86072 & 86073): A= 3 ⁄4”Projection: 1 5 ⁄16”, Clearance= 13 ⁄16”• 1 3 ⁄4” Wrd. Knob (86074, 86075 & 86076): A= 7 ⁄8”Projection: 1 5 ⁄8”, Clearance= 7 ⁄8”8600186002860048600586006860078600886009• 1 3 ⁄8” Cab. Knob: A= 1 1 ⁄2”Projection: 2”, Clearance= 1 1 ⁄8”ABPorcelain• 1 3 ⁄4” Wrd. Knob: A= 1 1 ⁄2”Projection: 1 11 ⁄16”, Clearance= 1”Porcelain Wardrobe 1 3 ⁄4” DiameterIce White86034Olde Gold86035Stoneware86036Almond86029Devonshire86032Bedford86030Courtney86031Ebony86033AOld Town• 1” Cab. Knob: A= 11 ⁄16”Projection: 1”, Clearance= 1 ⁄2”• 1 1 ⁄4” Cab. Knob: A= 13 ⁄16”Projection: 1 5 ⁄16”, Clearance= 3 ⁄4”AOld Town Wardrobe (86028)• 1 3 ⁄4” Wrd. Knob: A= 1 3 ⁄4”Projection: 1 5 ⁄8”, Clearance= 1”CBAAstoria Emerald Drawer PullClear (86018), Emerald (86026), Milk (86067)• A= 3 13 ⁄16”• B = 1 1 ⁄4”• C = 5 ⁄8”Projection: 1 1 ⁄2”, Clearance= 13 ⁄16”AAstoria Cabinet KnobClear (86017), Emerald (86025)• 1 1 ⁄8” Cab. Knob: A= 13 ⁄16”Projection: 1 1 ⁄4”, Clearance= 5 ⁄8”EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812156

2008 dimension 6/19/09 4:07 PM Page 157157EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812




2008 dimension 6/19/09 4:07 PM Page 161DOOR ACCESSORIESBRASS 8” PULLS-BRASS PUSH AND PULL PLATESA A A1”1 1 ⁄8”1 3 ⁄8”A1 5 ⁄16” A 1 1 ⁄8”Knoxville Pull (86077)Wilshire Pull (86078)Ribbon & Reed Pull(86080)Lafayette Brass Pull(86118)Arts & Crafts Pull(86079)Projection: 2 1 ⁄2”A= 8 13 ⁄16”Base: 3 ⁄4” DiameterProjection: 2 1 ⁄8”A= 8 7 ⁄8”Base: 1 1 ⁄8” DiameterProjection: 2 3 ⁄8”A= 8 15 ⁄16”Base: 1” DiameterProjection: 3 ⁄4”A= 8 13 ⁄16”Base: 3 ⁄4” DiameterProjection: 2 1 ⁄8”A= 8 7 ⁄8”Base: 1 1 ⁄8” DiameterAAScrew Specifications - Brass 8” PullsStandard Components:• 1”, 10-32 Screws• 1”, 14-20 Screws• Inserts for 14-20 screwsB12”B8”12”• Inserts for 10-32 screws3”3”Knoxville Push (86081)PlateA= 2 1 ⁄8” Screw-to-ScrewB= 11 1 ⁄8” Screw-to-ScrewKnoxville Pull Plate (86082)Plate onlydrilled to accept 8” pullA= 2 1 ⁄8” Screw-to-ScrewB= 11 1 ⁄8” Screw-to-Screw161EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 162CAST BRASS DOOR PULLSAB A2 1 ⁄2” 2”BA1 1 ⁄2”BB1 1 ⁄2”ASpindle Style (86065)A = 18”B = 12 1 ⁄4” Screw-to-ScrewProjection: 4 3 ⁄4”Base: 2 3 ⁄4” DiameterRope Style (86064)Scroll Style (86066)A = 18”A = 18”B = 16” Screw-to-Screw B = 4 7 ⁄32” Screw-to-ScrewProjection: 4 3 ⁄4”Projection: 4”Base: W = 3”, H = 1 5 ⁄8” Base: 2 5 ⁄8” SquaredScrew Specifications - Brass 18” & 24” PullsStandard Components:• #10, 1” Wood ScrewsRope Style (86083)A = 24”B = 20 7 ⁄32” Screw-to-ScrewProjection: 4”Base: 2 5 ⁄16” SquaredScrew Specifications - Brass 12” PullsStandard Components:• 1”, 10-32 Screws12”C-to-C1” 12” 1 3 ⁄4”13”12 3 ⁄4” 12”1 1 ⁄8”Overall C-to-C Overall C-to-C12 3 ⁄4”Overall• 1”, 14-20 Screws• Inserts for 14-20 screws• Inserts for 10-32 screwsKnoxville PullPVD-LifetimeProjection: 2 1 ⁄2”Clearance: 1 1 ⁄2”Wilshire PullPVD-LifetimeProjection: 2 1 ⁄8”Clearance: 1 3 ⁄8”Arts & Crafts PullOil Rubbed BronzeProjection: 2 1 ⁄8”Clearance: 1 3 ⁄8”EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812162

2008 dimension 6/19/09 4:07 PM Page 1638”, 18” AND 24” WROUGHT STEEL PULLS8” Screw-to-ScrewCBAA 1”1 5 ⁄16”A1 1 ⁄16”Lafayette (76030) Normandy (76031)A= 8 13 ⁄16”A= 8 13 ⁄16”Projection: 2 1 ⁄2”Projection: 2 1 ⁄2”Base: 3 ⁄4” DiameterBase: 3 ⁄4” Diameter3 3 ⁄16”San Carlos 8” (76028)A= 12 1 ⁄4”, B = 2 1 ⁄2”, C = 1 1 ⁄8”Projection: 2 7 ⁄16”Screw SpecificationsWrought Steel 8” PullsStandard Components:• 1”, 10-32 Screws• 1”, 14-20 Screws• Inserts for 14-20 screws• Inserts for 10-32 screwsA1 3 ⁄8”A1 3 ⁄8”Screw SpecificationsWrought Steel 18” & 24 PullsStandard Components:• #10, 1” Wood ScrewsA= 14 3 ⁄4” Screw-to-Screw 3”Projection: 3”San Carlos, 18” (76029)3 3 ⁄16”San Carlos, 24” (76041)A= 21 15 ⁄16” Screw-to-ScrewProjection: 3”163EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 164SANDCAST BRONZE AND LOST WAX CAST DOOR PULLS8” Screw-to-Screw18” Screw-to-Screw1”AA3 ⁄4”AB1 1 ⁄4”8” Bronze (86090) 8” Bronze (86088)A= 9 13 ⁄16”Projection: 3”Base Diameter: 7 ⁄8”8” Tuscany PullFits Door Thickness 1- 3 ⁄8” to 2- 1 ⁄4”Screw SpecificationsCast Bronze 8” PullsStandard Components:• 1”, 10-32 Screws• 1”, 14-20 ScrewsA= 9 13 ⁄16”Projection: 2 9 ⁄16”Base Diameter: 1 13 ⁄16”8” Screw-to-Screw3”18” Bronze RodA= 21 1 ⁄16” B = 18”Projection: 3 3 ⁄16”Base Diameter: 3”Screw SpecificationsCast Bronze 18” PullsStandard Components:• #10, 1” Wood ScrewsDecorative CapBBBase: 13 ⁄16”Base:1 3 ⁄4” Dia.ThreadedWasherAThru Bolt3 ⁄4”Threaded Tube(attached)Screw SpecificationsArt Nouveau 8” Pull• 1 1 ⁄2”, 8-32 ScrewsLeft Hand Right HandA= 9 3 ⁄16” B = 1 7 ⁄16”Projection: 2 1 ⁄2”1 1 ⁄16”8”C-to-C9 7 ⁄8”Overall12”C-to-C13 3 ⁄4”OverallBronze 8” Nunez PullProjection: 2 3 ⁄4”Clearance: 1 11 ⁄16”Standard Components:• 1”, 10-32 Screws• 1”, 14-20 Screws• Inserts for 14-20 screws• Inserts for 10-32 screwsBronze 12” Rod PullProjection: 2 9 ⁄16”Clearance: 1 3 ⁄4”EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812164

2008 dimension 6/19/09 4:07 PM Page 165LOST WAX CAST DOOR PULLS - PUSH & PULL PLATES3”3”A2 3 ⁄4”3”A14”8”BA9 1 ⁄4”8”11”8”B14”A= 2 5 ⁄32” Screw-to-ScrewB = 11 1 ⁄4” Screw-to-ScrewA= 3 ⁄4”Base = 1 1 ⁄4” A= 13 ⁄16”Tuscany Petal Pull PlateSquared Base = 1 1 ⁄4”SquaredTuscany Petal Push PlateA= 2 5 ⁄32” Screw-to-ScrewB = 11 1 ⁄4” Screw-to-Screw4”Base: 1 3 ⁄16”Base: 1 1 ⁄4” x 1 1 ⁄4”Base: 1 1 ⁄4” Dia.Base: 1 1 ⁄4” x 1 1 ⁄4”4”10 3 ⁄8”Overall1”8”C-to-C9 1 ⁄4”OverallTuscany 8” Recoleta PullProjection: 2 7 ⁄8”Clearance: 1 5 ⁄8”Standard Components:• 1”, 10-32 Screws• 1”, 14-20 Screws• Inserts for 14-20 screws• Inserts for 10-32 screws1 1 ⁄16”8”C-to-C13 1 ⁄4”OverallTuscany 8” Palermo PullProjection: 2 13 ⁄16”Clearance: 1 3 ⁄4”Tuscany 12” Twist PullProjection: 2 3 ⁄4”Clearance: 1 13 ⁄16”1” 12” 1”C-to-C12”C-to-CTuscany 12” Twist PullProjection: 3”Clearance: 2”A18”1 3 ⁄16” 1 3 ⁄16”A24”8” Tuscany Twist - (86069)8” Tuscany Column - (86156)Tuscany Petal Push Plate - (86181)Tuscany Petal Pull Plate - (86182)18” Column Pull - (86157)24” Column Pull - (86158)Tuscany 18” Column PullSupplied with#10 wood screws.A= 13 7 ⁄16” Screw-to-ScrewBase = 2”L, 2 3 ⁄4”WTuscany 24” Column PullSupplied with#10 wood screws.A= 19 7 ⁄16” Screw-to-ScrewBase = 2”L, 2 3 ⁄4”W165EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812






2008 dimension 6/19/09 4:07 PM Page 171SOLID BRASS DOOR ACCESSORIES4”Rectangular Flush Pull (2201)Round Flush Pull (2211)2 1 ⁄2” Dia.1 3 ⁄4”4”Edge Pull with Screws (2221)3” (2232) & 4” (2231)Door StopBase = 1 1 ⁄4”3 ⁄4”1 3 ⁄8” 1”1 11 ⁄16”1”2 1 ⁄8”2 1 ⁄8”2- 1 ⁄4”3 3 ⁄8”Ball Catchwith Strike & Screws (8802)Roller Catchwith Strike & Screws (8801)2 3 ⁄8”11 ⁄32”3 ⁄4”1 ⁄2”5 ⁄16”Extended Button Tip(2242)1 3 ⁄4”Hinge Pivot Stop(2241)171EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 172SOLID BRASS DOOR ACCESSORIES2 1 ⁄2”2 1 ⁄2”7 1 ⁄2”4 1 ⁄2”7 1 ⁄2”4 1 ⁄2”Pocket Door Mortise LocksKeyed - part# (2103)Passage - part# (2104)Privacy - part# (2105)Dummy - part# (2106)• Fits standard door tickness 1- 3 ⁄8” to 1 3 ⁄4” ( Must Specify Door Thickness)• Plates are 1 ⁄16” ThickSolid Brass Door Viewer(2610)1” Dia.5 ⁄8”7 ⁄8”Half Dome Door Stop(2251)Goose Style Door Stop(2253)1”1 1 ⁄2”1 3 ⁄16”1 3 ⁄8”2 1 ⁄2”• Fits standard door tickness 1- 3 ⁄8” to 2”( not available for thicker door)1” Projection (tall)1 13 ⁄16” Base Diameter2 7 ⁄8” Tall172

2008 dimension 6/19/09 4:07 PM Page 173Solid Brass Surface BoltsSurface Bolt 6” (8511)with 3 Strikes & Screws1 7 ⁄8”DOOR ACCESSORIESSupplied With Matching Screws & Lighted Button7 ⁄8”1 1 ⁄4”Lip Strike(Side of Door)3 ⁄4”2”2 3 ⁄4”1 5 ⁄16”1”1 1 ⁄4” 1 1 ⁄4”1 7 ⁄8”Mortise Strike(Bottom of Door)1 7 ⁄8”Angle Strike(Top of Door)2 1 ⁄8” Projection from bracketwhen thrown1”1 5 ⁄8”1 1 ⁄4”Screw to Screw: 1 5 ⁄8” Screw to Screw: 2 1 ⁄4”Small Oval Style(2462)Small #1 Style(2461)*Note:These are the dimensions forthese two styles only. All otherdoorbell button rosettes are thesame dimensions as thepassage/privacy rosettes.Arch StyleBrass (2290)Bronze (2290)Screen Door Locksets6”1 13 ⁄16”1”1 9 ⁄16” Projection from bracketwhen thrownRectangular StyleBrass (2291)Bronze (2291)1 1 ⁄4”ExteriorInterior6”1 3 ⁄8” C-to-C1 1 ⁄4” Dia.Surface Bolt 18” (8513), 12” (8512)with 3 Strikes & Screws1 1 ⁄4”ExteriorInteriorExterior & InteriorClearance: 3 ⁄4”Projection: 1 5 ⁄8”Lever Length: 2 5 ⁄8”Knob Diameter: 1 11 ⁄16”Door Thickness Specifications: 1”-1 3 ⁄4”173EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 174DOOR ACCESSORIESSolid Brass Casement LatchesStandard (8703) 1”Large (8713)1 1 ⁄16”1 5 ⁄8”2 1 ⁄16”Projection: 1 7 ⁄8” Projection: 1 7 ⁄8”1 3 ⁄8”2 3 ⁄4” 1 1 ⁄2”1”7 ⁄16”6”Flush Bolts1 1 ⁄4”1” Bolt3 ⁄4”3 ⁄4”3 3 ⁄4”2”1”3 ⁄8”Patio Door Bolts, KeyedSilverBronzeWhiteBlack206011206012206016206017Non-KeyedSilver 206511Bronze 206512White 206516Square Corner (8501)1 ⁄4” Radius (8502)5 ⁄16”POCKET DOOR LOCKSStrike Plate(for privacy only)1 1 ⁄16”3 1 ⁄2”3 1 ⁄2”2”2 9 ⁄16”5 ⁄16”2 3 ⁄8”Passage Function• Fits door thickness 1 3 /8” to 1 3 /4”• Standard rectangular door prep3 1 /8” x 1 3 /4”2 3 ⁄8”Privacy Function• Fits door thickness 1 3 /8” to 1 3 /4”• Standard rectangular door prep3 1 /8” x 1 3 /4”• Complete with strikeplate2” Screw-to-Screw1 ⁄16” ThickEMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812174

2008 dimension 6/19/09 4:07 PM Page 175BRASS HOUSE NUMBERSSupplied With Matching ScrewsBrass 4”4”(2814), 6”(2820)Width: 2 1 ⁄4”Thickness: 3 ⁄16”4”(2815), 6”(2825)4”(2811), 6”(2821)4”(2816), 6”(2826)4”(2812), 6”(2822)4”(2813), 6”(2823)Brass 6”Width: 2 3 ⁄4”Thickness: 3 ⁄16”4”(2818), 6”(2828)4”(2817), 6”(2827)4”(2814), 6”(2824)4”(2819), 6”(2829)BRONZE HOUSE NUMBERS4”(2810), 6”(2820)Bronze 4”Width: 3 1 ⁄4”4”(2815), 6”(2825)4”(2811), 6”(2821)Thickness: 3 ⁄16”4”(2816), 6”(2826)4”(2812), 6”(2822)Bronze 6”Width: 4 5 ⁄8”4”(2817), 6”(2827)4”(2813), 6”(2823)Thickness: 3 ⁄16”4”(2818), 6”(2828)1754”(2814), 6”(2824)4”(2819), 6”(2829)EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 176DOOR ACCESSORIESSwitch Plates Forged Brass - Colonial DesignIncludes 1 ⁄2” & 3 ⁄4” 6-32 Machine ScrewsAll Plates approx. 1 ⁄4” Thick4 5 ⁄8” H x 2 7 ⁄8” WDescriptionToggle 1, Colonial Switch Plate(29111)Toggle 2, Colonial Switch Plate(29112)Toggle 3, Colonial Switch Plate(29113)Toggle 4, Colonial Switch Plate(29114)4 5 ⁄8” Squared4 5 ⁄8” H x 6 3 ⁄8” W4 5 ⁄8” H x 8 1 ⁄4” W4 5 ⁄8” H x 2 7 ⁄8” WRocker 1, Colonial Switch Plate(29121)Rocker 2, Colonial Switch Plate(29122)Rocker 3, Colonial Switch Plate(29123)Rocker 4, Colonial Switch Plate(29124)4 5 ⁄8” Squared4 5 ⁄8” H x 6 3 ⁄8” W4 5 ⁄8” H x 8 1 ⁄4” W4 5 ⁄8” H x 2 7 ⁄8” W4 5 ⁄8” SquaredDuplex 1, Colonial Switch Plate(29131)Duplex 2, Colonial Switch Plate(29132)4 5 ⁄8” Squared 4 5 ⁄8” H x 6 3 ⁄8” W4 5 ⁄8” SquaredToggle 1, Duplex 1(29141)Toggle 2, Duplex 1(29142)Rocker 1, Duplex 1(29143)4 5 ⁄8” H x 2 7 ⁄8” W3 1 ⁄4” C-to-CColonial Blank Plate(29151)4 5 ⁄8” H x 2 7 ⁄8” W3 ⁄8” Dia.Colonial Cable Plate(29161)EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812176

2008 dimension 6/19/09 4:07 PM Page 177DOOR ACCESSORIESSwitch Plates Forged Brass - Rope DesignIncludes 1 ⁄2” & 3 ⁄4” 6-32 Machine ScrewsAll Plates approx. 5 ⁄16” Thick5 1 ⁄8” H x 3” W5 1 ⁄8” H x 3” WDescriptionToggle 1, Rope Switch Plate(29211)Toggle 2, Rope Switch Plate(29212)Toggle 3, Rope Switch Plate(29213)Toggle 4, Rope Switch Plate(29214)Rocker 1, Rope Switch Plate(29221)Rocker 2, Rope Switch Plate(29222)Rocker 3, Rope Switch Plate(29223)Rocker 4, Rope Switch Plate(29224)5 1 ⁄8” H x 4 5 ⁄8” W5 1 ⁄8” H x 4 5 ⁄8” W5 1 ⁄8” H x 6 1 ⁄2” W 5 1 ⁄8” H x 8 9 ⁄32” W5 1 ⁄8” H x 6 1 ⁄2” W 5 1 ⁄8” H x 8 9 ⁄32” W5 1 ⁄8” H x 3” W 5 1 ⁄8” H x 4 5 ⁄8” WDuplex 1, Rope Switch Plate(29231)Duplex 2, Rope Switch Plate(29232)5 1 ⁄8” H x 4 5 ⁄8” WToggle 1, Duplex 1(29241)Toggle 2, Duplex 1(29242)Rocker 1, Duplex 1(29243)5 1 ⁄8” H x 6 1 ⁄2” W5 1 ⁄8” H x 4 5 ⁄8” W5 1 ⁄8” H x 3” W3 1 ⁄4” C-to-CRope Blank Plate(29251)5 1 ⁄8” H x 3” W3 ⁄8” Dia.Rope Cable Plate(29261)177EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:07 PM Page 178DOOR ACCESSORIESSwitch Plates Cast BronzeIncludes 1 ⁄2” & 3 ⁄4” 6-32 Machine ScrewsAll Plates approx. 1 ⁄4” Thick4 5 ⁄8” H x 2 7 ⁄8” WDescription4 5 ⁄8” Squared 4 5 ⁄8” H x 6 3 ⁄8” W 4 5 ⁄8” H x 8 1 ⁄4” WToggle 1, Bronze Switch Plate(29311)Toggle 2, Bronze Switch Plate(29312)Toggle 3, Bronze Switch Plate(29313)Toggle 4, Bronze Switch Plate(29314)4 5 ⁄8” H x 2 7 ⁄8” WRocker 1, Bronze Switch Plate4 5 ⁄8” Squared 4 5 ⁄8” H x 6 3 ⁄8” W 4 5 ⁄8” H x 8 1 ⁄4” W(29321)Rocker 2, Bronze Switch Plate(29312)Rocker 3, Bronze Switch Plate(29313)Rocker 4, Bronze Switch Plate(29314)4 5 ⁄8” H x 2 7 ⁄8” W4 5 ⁄8” SquaredDuplex 1, Bronze Switch Plate(29331)Duplex 2, Bronze Switch Plate(29332)4 5 ⁄8” SquaredToggle 1, Duplex 1(29341)Toggle 2, Duplex 1(29342)Rocker 1, Duplex 1(29343)4 5 ⁄8” H x 6 3 ⁄8” W4 5 ⁄8” Squared4 5 ⁄8” H x 2 7 ⁄8” W3 1 ⁄4” C-to-CBronze Blank Plate(29351)4 5 ⁄8” H x 2 7 ⁄8” W3 ⁄8” Dia.Bronze Cable Plate(29361)EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812178

2008 dimension 6/19/09 4:08 PM Page 1792 1 ⁄2” S-to-S3 3 ⁄8”DOOR ACCESSORIESBrass Mail Slot (2280)12” S-to-S5 ⁄8” ProjectionNote: Mail flap is springloaded on the exteriorand swing loosely on theinterior. Both exterior andinterior trims have the samedimensions.13 1 ⁄16”Brass Door Knockers (2620)3 13 ⁄16”7 1 ⁄2”Urn StyleProjection = 1 1 ⁄4”Note: We recommend that US3 finish be selected for those who intend to have the doorknocker engraved. Emtek does not offer engraving services at this time2 3 ⁄4”7 1 ⁄2”1 5 ⁄16”7 13 ⁄16”Projection = 3 1 ⁄4”Projection = 3 1 ⁄4”Narrow Style (2621)S Style (2622)Bronze Door Knockers2”3” Door Knocker (86059) 4” Door Knocker (86060)2”Sized by ring diameterBase thickness = 7 ⁄16”1 1 ⁄2”Projection: 1 1 ⁄2” Projection: 1 7 ⁄8”Bronze Door Knockers and Ring Pulls179EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

























2008 dimension 6/19/09 4:08 PM Page 204BRASS BATH ACCESSORIES3 3 ⁄8”6 5 ⁄16”1 3 ⁄4”1” S-to-S4”Projection: 2 15 ⁄16”Double Hook (2609)Brass Towel Ring (2601)1 1 ⁄2”Projection: 2 5 ⁄8”Brass Robe Hook (2606)Brass Towel Bar 18”(26021), 24”(26022), 30”(26023)11 ⁄16” Dia.2 15 ⁄16” Projection1 1 ⁄2”11 ⁄16” Dia.3 ⁄4” S-to-S1 3 ⁄4”3”4”11 ⁄16” Dia.3 7 ⁄16”5 1 ⁄2” ProjectionProjection: 2 1 ⁄16”Double Hook (2607)Brass Double Towel Bars 18”(26031), 24”(26032), 30”(26033)13 ⁄16”7 ⁄16” Thick6 3 ⁄8”Projection: 2 15 ⁄16”Brass Paper Holder Style 1 (2604)Projection: 3 7 ⁄16”1 1 ⁄8” Dia.Single Hook Post (2608)6 1 ⁄4”Projection: 2 15 ⁄16”Brass Paper Holder Style 2 (2605)EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812204

2008 dimension 6/19/09 4:08 PM Page 205WROUGHT STEEL BATH ACCESSORIES5 ⁄8” Dia.Projection: 3 1 ⁄8”Wrought Steel Towel Bar9”3 ⁄4”8 1 ⁄8”Projection: 3 5 ⁄16”Wrought Steel Bar Style Paper Holder(2503)Projection: 3 5 ⁄16”Wrought Steel Spring Rod Style Paper Holder(2504)1 5 ⁄16”3 7 ⁄8”6 1 ⁄2” Dia.1 ⁄2” ThickProjection: 2 3 ⁄4”Wrought Steel Towel Ring(2501)1 1 ⁄2”3” Projection13 ⁄16” Screw-to-ScrewWrought Steel Robe Hook(25050)Notes:Rosette size same as on passage sets.205EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:08 PM Page 206TUSCANY BATH ACCESSORIES5 ⁄8” Dia.Projection: 2 15 ⁄16”Tuscany Towel Bar18”(27021), 24”(27022), 30”(27023)1” Wide6 5 ⁄16”3”5 ⁄8” Dia.3 ⁄4”Projection: 2 1 ⁄4”Tuscany Towel Ring(2701)Projection: 5 1 ⁄2”Tuscany Double Towel Bars18”(27081), 24”(27082), 30”(27083)6 3 ⁄8”13 ⁄16”13 ⁄16” Dia.6 1 ⁄4”Projection: 2 15 ⁄16”Cast Bronze Spring Rod Style Paper Holder(2704)Projection: 3”Tuscany Bar Style Paper HolderLeft Hand(2705LH), Right Hand(2705RH)1” WideBProjection: 2 3 ⁄4”AC3 1 ⁄2”Tuscany Single Hook (2706)Projection: 2 1 ⁄4”A: 1 3 ⁄4”B: 1 1 ⁄2”C: 7 ⁄16” Screw-to-ScrewTuscany Double Hook (2707)* Base for Dbl. Robe Hook is 1 3 ⁄4” H x 1 1 ⁄2” WNotes:• Rosette size same as on passage sets.EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812206

2008 dimension 6/19/09 4:08 PM Page 207SANDCAST BRONZE BATH ACCESSORIES5 ⁄8” Dia.Projection: 2 15 ⁄16”Sandcast Bronze Towel Bar5 ⁄8” Dia.3”Projection: 5 1 ⁄2”Sandcast Bronze Double Towel Bar18”(23051), 24”(23052), 30”(23053)6 5 ⁄16”3” Projection3 ⁄4”Projection: 2 1 ⁄4”Sandcast Bronze Towel Ring(2301)207EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:08 PM Page 208SANDCAST BRONZE BATH ACCESSORIES13 ⁄16” Dia.13 ⁄16” Dia.6 1 ⁄2”Projection: 3”Sandcast Bronze Bar Style Paper Holder(2303)6 1 ⁄4”Sandcast Bronze Spring Rod Style Paper Holder(2304)1 3 ⁄4”1 3 ⁄4”3 9 ⁄16”1 1 ⁄2”Sandcast Bronze Double Hook(2306)15 ⁄16”Projection: 2 3 ⁄4”Sandcast Bronze Single Post Style Hook(2308)15 ⁄16” Dia.Projection: 2 3 ⁄8”2”ABC4 1 ⁄4”12”Sandcast Bronze 3 Hooks(2307)1 1 ⁄2”A: 1 3 ⁄4”B: 1 1 ⁄4”C: 13 ⁄16” Screw-to-ScrewSandcast Bronze Robe Hook(86106)EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812208






2008 dimension 6/19/09 4:08 PM Page 214SOLID BRASS & PLATED STEEL HINGES7 ⁄8”1”1”1 5 ⁄16”1 1 ⁄2”2 3 ⁄4”1 5 ⁄32”1”3”1 1 ⁄2”1 3 ⁄4”Brass Residential DutySquare Corner: 961131 ⁄4” Radius: 961235 ⁄8” : 96133Brass Heavy Duty, Plain BearingSquare Corner: 962131 ⁄4” Radius: 962235 ⁄8” : 96233Brass Heavy Duty, Ball BearingSquare Corner: 964133 1 ⁄2” x 3 1 ⁄2”3 ⁄8”Steel Residential DutySquare Corner: 910131 ⁄4” Radius: 910235 ⁄8” : 91033Steel Heavy Duty, Plain BearingSquare Corner: 920131 ⁄4” Radius: 92023Steel Heavy Duty, Ball BearingSquare Corner: 940131 ⁄2”Steel Residential DutySquare Corner: 910141 ⁄4” Radius: 910245 ⁄8” : 910344” x 4”3”1”1”1”1 11 ⁄32”1 1 ⁄4”1 1 ⁄4”3 1 ⁄2”1”1 9 ⁄32”1”1 3 ⁄4”1 1 ⁄4”2”Brass Residential DutySquare Corner: 961141 ⁄4” Radius: 961245 ⁄8” : 96134Brass Heavy Duty, Plain BearingSquare Corner: 962141 ⁄4” Radius: 962245 ⁄8” : 962344” x 4”1 ⁄2”Steel Heavy Duty, Plain BearingSquare Corner: 920141 ⁄4” Radius: 92024Steel Heavy Duty, Ball BearingSquare Corner: 940141 ⁄4” Radius: 94024Brass Heavy Duty, Plain BearingSquare Corner: 962151 ⁄4” Radius: 96225Brass Heavy Duty, Ball BearingSquare Corner: 964151 ⁄4” Radius: 964254 1 ⁄2” x 4 1 ⁄2”1 ⁄2”Steel Heavy Duty, Plain BearingSquare Corner: 920151 ⁄4” Radius: 92025Steel Heavy Duty, Ball BearingSquare Corner: 940151 ⁄4” Radius: 94025Brass Heavy Duty, Ball BearingSquare Corner: 96414EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812214

2008 dimension 6/19/09 4:08 PM Page 215SOLID BRASS HINGESBALL BEARING, EXTRUDED 3 1 /2” x 3 1 /2”, 4” x 4”, 4 1 /2” x 4 1 /2”, 5” x 5”5” x 5”1 1 ⁄4”1 1 ⁄2”1 1 ⁄2”4”1 13 ⁄16”Brass Heavy Duty, Ball BearingSquare Corner: 964161 1 ⁄2”2 1 ⁄2”9 ⁄16”3 1 ⁄2” x 3 1 ⁄2”2 3 ⁄4”SPRING HINGES3”4” x 4”1 1 ⁄2”7 ⁄8”1”1”1 5 ⁄32”1”1 11 ⁄32”1 1 ⁄2”1”1 3 ⁄4”3 ⁄8”215Hinges #96113961239613396114961249613496213962239623396214962249623496215962259641396414964159642596416Brass HingesDescription3 1 /2”x 3 1 /2”Residential DutyPlain Bearing4”x 4”Residential DutyPlain Bearing3 1 /2”x 3 1 /2”Heavy DutyPlain Bearing4”x 4”Heavy DutyPlain Bearing4 1 /2”x 4 1 /2”Heavy DutyPlain Bearing3 1 /2”x 3 1 /2”Ball Bearing4”x 4” Ball Bearing4 1 /2”x 4 1 /2”Ball Duty5”x 5”Ball BearingScrew Dimensions#9x 3 ⁄4”#9x 3 ⁄4”#10x 1”#12x 1 3 ⁄4”#12x 1 3 ⁄4”#10x 1”#12x 1 3 ⁄4”#12x 1 3 ⁄4”#12x 1 3 ⁄4”Hinges #91013910239103391014910249103492013920239201492024920159202594033940149402494015940251 ⁄2”Steel Plated HingesDescription Screw Dimensions3 1 /2”x 3 1 /2”#9x 3 ⁄4”Residential DutyPlain Bearing4”x 4”#9x 3 ⁄4”Residential DutyPlain Bearing3 1 /2”x 3 1 /2”Heavy DutyPlain Bearing4”x 4”Heavy DutyPlain Bearing4 1 /2”x 4 1 /2”Heavy DutyPlain Bearing3 1 /2”x 3 1 /2”Ball Bearing4”x 4” Ball Bearing4 1 /2”x 4 1 /2”Ball Duty#10x 1”#12x 1 1 ⁄4”#12x 1 1 ⁄4”#10x 1”#12x 1 1 ⁄4”#12x 1 1 ⁄4”


2008 dimension 6/19/09 4:08 PM Page 217BALL & STEEPLE TIPS-SOLID BRASS3 1 /2” & 4” Residential Duty(97203 & 97204)3 1 /2” H.D & B.B(97303)11 ⁄16”1 ⁄2”3 ⁄4”9 ⁄16”7 ⁄16” Dia.1 ⁄2” Dia.Threading is the same for all solid brass hinge tips4” H.D & B.B(97304)4 1 /2” H.D & B.B(97305)3 ⁄4”19 ⁄32”13 ⁄16”5 ⁄8”1 ⁄2” Dia.1 ⁄2” Dia.3 1 /2” & 4” Residential Duty(97213 & 97214)3 1 /2” H.D & B.B(97313)1 5 ⁄16”1 1 ⁄8”1 3 ⁄8”1 1 ⁄8”7 ⁄16” Dia.1 ⁄2” Dia.Threading is the same for all solid brass hinge tips4” H.D & B.B(97314)4 1 /2” H.D & B.B(97315)1 3 ⁄8”1 1 ⁄8”1 3 ⁄8”1 1 ⁄8”1 ⁄2” Dia.1 ⁄2” Dia.217EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:08 PM Page 218BALL & STEEPLE TIPS - PLATED STEEL9 ⁄16” Dia.17 ⁄32”35 ⁄64”9 ⁄16” Dia.11 ⁄16”3 1 /2” Ball Tip(94103)4” Ball Tip(94104)4 1 /2” Ball Tip(94105)9 ⁄32” Pin Dia.9 ⁄32” Pin Dia.5 ⁄16” Pin Dia.9 ⁄16” Dia.9 ⁄16” Dia.1 11 ⁄32”9 ⁄16” Dia.1 5 ⁄16”1 11 ⁄32”3 1 /2” Ball Tip(94103)4” Ball Tip(94114)4 1 /2” Ball Tip(94115)9 ⁄32” Pin Dia.9 ⁄32” Pin Dia.5 ⁄16” Pin Dia.EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812218

2008 dimension 6/19/09 4:08 PM Page 219LIMITED WARRANTYEmtek Products, Inc. (the “Company”) warrants to the original purchaser that, except for products with Rust, DeepBurgundy, Medium Bronze, Flat Black Patina and Silver Patina finishes, the products manufactured by it (the“Products”) are free of defects in material and workmanship, provided:1. the Company has been notified within five years of purchase date and has been given the opportunity of inspectionby return of any alleged defective Products to the Company, free and clear of all liens and encumbrances,transportation prepaid, accompanied by a statement of defects and proof of purchase; and2. the Product has not been modified, abused, misused or improperly installed, maintained and/or repaired during suchperiod; andThere is no warranty on Rust, Deep Burgundy, Medium Bronze, Flat Black Patina and Silver Patina finishes.The Company shall, at its option, either repair or replace, free of charge, any Products or part thereof found upon theCompany’s inspection, to be so defective, or at the Company’s sole discretion refund the purchase price, less areasonable allowance for depreciation, in exchange for the Product.The Company makes no other warranty, and all implied warranties including any warranty of merchantability orfitness for a particular purpose are limited to the duration of the expressed warranty period as set forth above.The Company’s maximum liability hereunder is limited to the purchase price of the product. In no event shallthe Company be liable for any consequential, indirect, incidental or special damages of any nature arising fromthe sale or use of the product, whether in contract, tort, strict liability or otherwise.Notes:A. Some states do not allow limitations on incidental consequential damages or how long an implied warranty lasts sothat the above limitations may not fully apply.B. This warranty gives specific legal rights and a buyer may also have other rights which may vary from state to state.C. For warranty service and shipping instructions contact Emtek Products, Inc. at:15250 E. Stafford Street, City of Industry, CA 91744, (626)961-0413.219EMTEK PRODUCTS INC.Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812

2008 dimension 6/19/09 4:08 PM Page 220EMTEK PRODUCTS INC.15250 E. Stafford StreetCity of Industry, California 91744Tel: 800-356-2741 • 800-428-4889 • 626-961-0413Fax: 800-577-5771 • 626-336-2812www.emtek.comASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety andconvenience.An ASSA ABLOY Group brand

Technical Reference Manual - Emtek

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?