3.1. - Hettich
3.1. - Hettich
3.1. - Hettich
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.1 Concealed and single-pivot hinges<br />
i<br />
Range summary/Technical comparison <strong>3.1.</strong>0 - <strong>3.1.</strong>1<br />
3.2 Specialty hinges<br />
i<br />
Range summary 3.2.0 - 3.2.1<br />
3.3 Butt hinges<br />
i<br />
Range summary/Technical comparison 3.3.0 - 3.3.1<br />
3.4 Flap fittings<br />
i<br />
Range summary 3.4.1<br />
Programme overview<br />
Group 3<br />
Programme overview Group 3 3.0.1
<strong>3.1.</strong>0<br />
Range summary/Technical comparison<br />
3.1 Concealed and single-pivot hinges<br />
Page number<br />
sensys<br />
<strong>3.1.</strong>2 - <strong>3.1.</strong>5<br />
Description Concealed hinge<br />
with integrated dampening<br />
Silent System<br />
Intermat/Ecomat<br />
<strong>3.1.</strong>6 - <strong>3.1.</strong>103<br />
Concealed hinge<br />
for wood, glass and profiled<br />
doors, aluminium/wood framed<br />
doors as well as corner cabinets<br />
and units<br />
Opening angle 110° - 165° 95° - 180° 95°<br />
Slide-on<br />
<strong>3.1.</strong>144 - <strong>3.1.</strong>151<br />
Concealed hinge<br />
for wood doors<br />
Hinge arm assembly Toolless snap-on Toolless snap-on Slide-on<br />
Hinge cup mounting • Screw fixing<br />
• Knock in<br />
• Toolless<br />
fast assembly (Cup FIX)<br />
• Screw fixing<br />
• Knock in<br />
• Fast-assembly (Cup Flash )<br />
• Toolless<br />
fast assembly (Cup FIX)<br />
• Screw fixing<br />
• Knock in<br />
Door adjustment 3-dimensional 3-dimensional 3-dimensional<br />
Optional equipment - • Silent System<br />
• Push-to-Open<br />
Concealed and single-pivot hinges<br />
• Silent System<br />
• Push-to-Open<br />
i<br />
www.hettich.com
i<br />
Minimat<br />
<strong>3.1.</strong>152 - <strong>3.1.</strong>161<br />
Concealed mini-hinge<br />
for small, light doors and doors<br />
with wood frame<br />
Perfekt<br />
<strong>3.1.</strong>162 - <strong>3.1.</strong>167<br />
Concealed hinge<br />
with short side element for<br />
wood doors, glass doors with<br />
wood frame and for cabinets<br />
with face frame<br />
Selekta Pro 2000<br />
<strong>3.1.</strong>168 - <strong>3.1.</strong>186<br />
Single-pivot hinge<br />
with externally visible knuckle<br />
for office and commercial<br />
furniture<br />
95° 95° 115° - 270° 180°<br />
Keyhole Slide-on Toolless snap-on Slide-on<br />
• Screw fixing<br />
• Knock in<br />
• Screw fixing • Screw fixing<br />
• Knock in<br />
Selekta 4<br />
<strong>3.1.</strong>187 - <strong>3.1.</strong>190<br />
Single-pivot hinge<br />
with externally visible knuckle<br />
for office and commercial<br />
furniture<br />
• Screw fixing<br />
• Knock in<br />
3-dimensional 3-dimensional 2-dimensional 2-dimensional<br />
• Silent System<br />
• Push-to-Open<br />
• Push-to-Open • Silent System<br />
• Opening angle stop<br />
• Clothing protection<br />
Range summary/Technical comparison<br />
3.1 Concealed and single-pivot hinges<br />
• Opening angle stop<br />
• Clothing protection<br />
Concealed and single-pivot hinges<br />
<strong>3.1.</strong>1
<strong>3.1.</strong>2<br />
Hinges with integrated dampening<br />
sensys<br />
Concealed dampened hinges sensys www.hettich.com
sensys<br />
Integrated dampening –<br />
quiet and elegant<br />
Soft dampened closing from a closing angle of 35°<br />
sensys ensures quiet, gentle closing from a closing<br />
angle of 35°. The concealed integrated dampening permits<br />
an elegant design.<br />
• Suitable for standard kitchen door formats<br />
• sensys includes hinges for<br />
- Opening angles of 110° and 165° (wide angle)<br />
- Aluminium framed doors<br />
- Corner cabinets with 30° and 45°<br />
face angle (W30/W45)<br />
- Face frame cabinets<br />
Hinges with integrated dampening<br />
sensys<br />
Concealed dampened hinges sensys <strong>3.1.</strong>3
<strong>3.1.</strong>4<br />
Hinges with integrated dampening<br />
sensys<br />
sensys<br />
Perfect dampening and<br />
aesthetically perfect design<br />
Integrated overlay adjustment<br />
± 2 mm with stop limitation –<br />
for perfect gap alignment<br />
Elegant cover cap<br />
for the hinge cup<br />
Concealed dampened hinges sensys www.hettich.com
Depth adjustment + 3 / - 2 mm<br />
Door alignment with millimetre accuracy<br />
without releasing the screw<br />
Eccentric height adjustment ± 2 mm<br />
Saves an enormous amount of time<br />
Sophisticated dampening system<br />
Invisibly integrated into the hinge arm<br />
Hinges with integrated dampening<br />
sensys<br />
Concealed latch<br />
Simple, safe, reliable<br />
Easily fitted, naturally without tools<br />
Just press gently and the<br />
hinge arm engages securely<br />
in the mounting plate<br />
Minimum door protrusion<br />
Optimum use of storage space<br />
with the aid of inside drawers<br />
Concealed dampened hinges sensys <strong>3.1.</strong>5
Overview of fast-assembly concealed hinges<br />
Intermat and Ecomat<br />
i<br />
Information<br />
<strong>3.1.</strong>8 - <strong>3.1.</strong>11<br />
Intermat 9956 / 9956 FIX<br />
Opening angle 120°-165°<br />
<strong>3.1.</strong>24 - <strong>3.1.</strong>27<br />
Intermat 9936 W30 /<br />
9936 W30 FIX<br />
Opening angle 95°<br />
for cabinet face angle 30°<br />
<strong>3.1.</strong>40 - <strong>3.1.</strong>43<br />
Intermat 9944 W -45 /<br />
9944 W -45 FIX<br />
Opening angle 125°<br />
for negative cabinet angle - 45°<br />
<strong>3.1.</strong>58 - <strong>3.1.</strong>61<br />
<strong>3.1.</strong>6 Concealed hinges Intermat/Ecomat<br />
Intermat 9943 / 9943 FIX<br />
Opening angle 110°<br />
<strong>3.1.</strong>12 - <strong>3.1.</strong>15<br />
Intermat 9936 / 9936 FIX<br />
Opening angle 95°<br />
for profile doors up to 32 mm<br />
<strong>3.1.</strong>28 - <strong>3.1.</strong>32<br />
Intermat 9936 W45 /<br />
9936 W45 FIX<br />
Opening angle 95°<br />
for cabinet face angle 45°<br />
<strong>3.1.</strong>44 - <strong>3.1.</strong>49<br />
Intermat 9924<br />
Opening angle 95°<br />
for smaller doors/narrow framed<br />
doors and<br />
aluminium frame profiles<br />
<strong>3.1.</strong>62 - <strong>3.1.</strong>63<br />
Ecomat 9843 / 9843 FIX<br />
Opening angle 110°<br />
<strong>3.1.</strong>16 - <strong>3.1.</strong>19<br />
Intermat 9935<br />
Opening angle 95°<br />
for profile doors up to 43 mm<br />
<strong>3.1.</strong>33 - <strong>3.1.</strong>35<br />
Intermat 9936 W90 /<br />
9936 W90 FIX<br />
Opening angle 95°<br />
for cabinets with blind panels 90°<br />
<strong>3.1.</strong>50 - <strong>3.1.</strong>53<br />
Intermat 9904<br />
Opening angle 95°<br />
for glass doors<br />
<strong>3.1.</strong>64 - <strong>3.1.</strong>65<br />
Intermat 9944 / 9944 FIX<br />
Opening angle 125°<br />
<strong>3.1.</strong>20 - <strong>3.1.</strong>23<br />
Intermat 9936 W20 /<br />
9936 W20 FIX<br />
Opening angle 95°<br />
for cabinet face angle 20°<br />
<strong>3.1.</strong>36 - <strong>3.1.</strong>39<br />
i<br />
Intermat 9944 W -30 /<br />
9944 W -30 FIX<br />
Opening angle 125°<br />
for negative cabinet angle - 30°<br />
<strong>3.1.</strong>54 - <strong>3.1.</strong>57<br />
Intermat 9924 W30<br />
Opening angle 95°<br />
for smaller doors/narrow frame<br />
doors with cabinet face angle 30°<br />
<strong>3.1.</strong>66 - <strong>3.1.</strong>67<br />
www.hettich.com
i<br />
Intermat 9904 W30<br />
Opening angle 95°<br />
for glass doors with<br />
cabinet angle 30°<br />
<strong>3.1.</strong>68 - <strong>3.1.</strong>69<br />
Intermat 9944 Alu<br />
Opening angle 125°<br />
for alu frame doors<br />
<strong>3.1.</strong>78 - <strong>3.1.</strong>79<br />
Mounting plate System 9000<br />
and accessories for Intermat<br />
and Ecomat hinges<br />
<strong>3.1.</strong>88 - <strong>3.1.</strong>92<br />
Intermat 9924 W45<br />
Opening angle 95°<br />
for smaller doors/narrow frame<br />
doors with cabinet face angle 45°<br />
<strong>3.1.</strong>70 - <strong>3.1.</strong>71<br />
Intermat 9930 / 9930 FIX<br />
Opening angle 50°/65°<br />
for corner cabinet folding doors<br />
<strong>3.1.</strong>80 - <strong>3.1.</strong>83<br />
40°<br />
45° 50°<br />
55°<br />
60°<br />
65°<br />
70°<br />
75°<br />
80°<br />
85°<br />
90°<br />
95°<br />
100°<br />
105°<br />
110°<br />
115°<br />
125° 120°<br />
135° 130°<br />
145°<br />
140°<br />
155°<br />
150°<br />
160°<br />
Mounting configurations<br />
Intermat<br />
for cabinet angles<br />
from 40° to 160°<br />
<strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Overview of fast-assembly concealed hinges<br />
Intermat and Ecomat<br />
Intermat 9904 W45<br />
Opening angle 95°<br />
for glass doors with<br />
cabinet angle 45°<br />
<strong>3.1.</strong>72 - <strong>3.1.</strong>73<br />
Intermat 9945<br />
Opening angle 95°<br />
for door overlay<br />
adjustment 12 mm<br />
<strong>3.1.</strong>84 - <strong>3.1.</strong>85<br />
Silent System<br />
Dampening closing mechanism<br />
for Intermat and Ecomat hinges<br />
<strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Intermat 9936 Alu Silent System<br />
Opening angle 95°<br />
for alu frame doors<br />
<strong>3.1.</strong>74 - <strong>3.1.</strong>77<br />
Intermat Konsul 5<br />
Opening angle 180°<br />
for rebated doors<br />
<strong>3.1.</strong>86 - <strong>3.1.</strong>87<br />
Push-To-Open<br />
Door-opening system for<br />
handleless furniture doors<br />
<strong>3.1.</strong>119 - <strong>3.1.</strong>142<br />
Concealed hinges Intermat/Ecomat<br />
<strong>3.1.</strong>7
<strong>3.1.</strong>8<br />
Fast-assembly concealed hinges<br />
Intermat<br />
Hinge technology at its best<br />
Intermat includes an ideal solution for every conceivable application:<br />
profile door hinges, wide angle hinges, hinges for glass doors,<br />
folding doors and aluminium framed doors, as well as special versions<br />
for special mounting options.<br />
Silent System – Perfectly controlled<br />
dampening<br />
Closes furniture doors quietly and gently.<br />
Superflat cup design<br />
3mm<br />
Securely anchored<br />
Hinge versions at a glance<br />
T42<br />
Screw on<br />
T43 / TB43<br />
Press-in<br />
Concealed hinges Intermat<br />
TFlash<br />
Fast-assembly<br />
Easily fitted, naturally without tools<br />
Just press gently and the hinge arm engages<br />
securely in the mounting plate.<br />
TFix<br />
Toolless<br />
fast-assembly<br />
THFix / TBFix<br />
Toolless<br />
fast-assembly<br />
www.hettich.com
Visible quality<br />
Integrated overlay adjustment<br />
for perfect reveal alignment<br />
457<br />
Fast-assembly concealed hinges<br />
Intermat<br />
Concealed hinges Intermat<br />
Concealed latch<br />
simple, safe, reliable<br />
Cam depth adjustment<br />
Exact door depth alignment –<br />
without loosening screws<br />
Eccentric height adjustment<br />
Saves an enormous<br />
amount of time<br />
Mounting plate System 9000<br />
The ideal solution for all types of mounting<br />
<strong>3.1.</strong>9
<strong>3.1.</strong>10<br />
Fast-assembly concealed hinges Intermat<br />
Technical information<br />
Mounting options<br />
Full overlay,<br />
cranking 0 mm<br />
The door is in front of the cabinet wall<br />
providing a small reveal at the side within<br />
which the door can open reliably.<br />
Alternatively, the door can be overlaid<br />
fully (max. 19 mm), in which case<br />
sufficient space must be allowed at the<br />
side for the required minimum reveal.<br />
Minimum door reveal Minimum door reveal for half overlay<br />
Minimum<br />
door reveal<br />
Minimum<br />
door reveal<br />
The minimum reveal (also known as the<br />
minimum clearance) is the space<br />
required at the side so that the door<br />
can open. The size of the minimum<br />
reveal depends on the cup distance C,<br />
the door thickness and the type of<br />
hinge selected. Radii on the door edges<br />
reduce the minimum clearance.<br />
The required minimum reveal is shown<br />
in the table for the respective hinge<br />
types.<br />
Number of hinges per door:<br />
Door width, height and weight as well as the material<br />
quality of the door are decisive factors determining the<br />
number of hinges required.<br />
The factors encountered in each individual case in practice<br />
differ enormously. For this reason, the number of hinges<br />
shown in the diagram should only be taken as a guide. If in<br />
doubt, it is advisable to produce a trial mounting or to<br />
increase the number of hinges.<br />
For reasons of stability, distance X between<br />
the hinges must always be made as large as possible.<br />
Concealed hinges Intermat<br />
Half overlay,<br />
cranking 9,5 mm<br />
In this case, there are two doors in front<br />
of a centre panel, with the required<br />
overall reveal between them. In other<br />
words, each door has a smaller overlay<br />
and cranked hinges are therefore used.<br />
2 x Minimum<br />
door reveal<br />
For half overlay configurations, the<br />
total reveal between the doors must<br />
be chosen to correspond to twice the<br />
door reveal. Both doors can then be<br />
opened at the same time.<br />
Door heights<br />
up to 2400<br />
up to 2000<br />
up to1600<br />
up to 900<br />
2<br />
Inset,<br />
cranking 16 mm<br />
The door is located inside the cabinet,<br />
i.e. beside the cabinet wall. Here too,<br />
a reveal is needed so that the door can<br />
open reliably. Heavily cranked hinges<br />
are used here.<br />
Cup distance C<br />
The cup distance C is<br />
the distance between<br />
the edge of the door<br />
and the edge of the<br />
cup hole.<br />
The maximum cup distance depends on<br />
the hinge in question.<br />
The larger the cup distance, the smaller<br />
the required minimum reveal.<br />
Overlay (Door overlay)<br />
Overlay<br />
The overlay is the distance by which<br />
the door projects over the cabinet front.<br />
Door width up to 600<br />
(Guide values for 19 mm chipboard panels with a<br />
density of 750 kg/m 3 )<br />
X<br />
3<br />
4<br />
5<br />
i<br />
min. 90 mm<br />
www.hettich.com<br />
C
i<br />
General determination of distances<br />
Mounting plates are available in different distances (0/1,5/3/5 and<br />
8 mm, some also with 4,5 and 11 mm). The height of the mounting<br />
plate is defined by distance D. Distance D is embossed on the top of<br />
each mounting plate. A larger distance D reduces the overlay for<br />
corner and centre stops. In the case of inset doors, a larger distance<br />
D increases the door reveal.<br />
To calculate the required distance, the minimum reveal must first be<br />
determined from the table of minimum door reveals for the type of<br />
hinge concerned. The minimum reveal depends on the cup distance<br />
C and the door thickness. Minimum reveals can be reduced by<br />
increasing the cup distance C and/or affixing radii to the door<br />
edges. The table of minimum door reveals also shows the possible<br />
combinations of door thickness and cup distance C.<br />
Calculating distance for overlay doors<br />
Once the minimum reveal has been defined, the required distance D<br />
can be read off in the table for the required door overlay and the<br />
required cup distance C.<br />
Ideally, the door overlay and value C should be selected to yield a<br />
distance D which is available as mounting plate.<br />
Example: Overlay = 16 mm and cup distance C = 5 mm yield a<br />
distance D equal to 1,5 mm. This distance is available as a mounting<br />
plate.<br />
If the calculated distance D differs from the distances available as<br />
mounting plates, the difference is compensated by means of the<br />
overlay adjustment screw on the hinge arm.<br />
Example: Door overlay = 16 mm and cup distance C = 4,5 mm yield<br />
a distance of 1,0 mm. The overlay is adjusted by +0,5 mm when<br />
using a mounting plate with a distance = 1,5 mm.<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment<br />
Turn screw clockwise:<br />
Door overlay decreases (-).<br />
Turn screw anticlockwise:<br />
Door overlay increases (+).<br />
Assembly<br />
1<br />
2<br />
click!<br />
Depth adjustment Height adjustment<br />
Direct, variable depth adjustment<br />
with the eccentric screw<br />
Snap-on assembly, disassembly<br />
3<br />
2<br />
2<br />
1<br />
Fast-assembly concealed hinges Intermat<br />
Technical information<br />
Calculating distance for inset doors<br />
Once the minimum reveal has been defined, the required distance D can<br />
be read off in the table for the required door thickness and the required<br />
cup distance C. This calculated distance D yields a width of joint<br />
between cabinet wall and door edge equal to the minimum reveal as<br />
listed in the table of minimum door reveals.<br />
Ideally, the door overlay and value C should be selected to yield a<br />
distance D which is available as a mounting plate.<br />
Example: Door thickness = 19 mm and cup distance C = 5 mm yield a<br />
distance D equal to 3 mm and thus a door reveal of 1,5 mm<br />
(corresponds to the minimum reveal as listed in the table of minimum<br />
door reveals).<br />
If the calculated distance D differs from the distances available as<br />
mounting plates, the difference is compensated by means of the overlay<br />
adjustment screw on the hinge arm.<br />
Example: Door thickness = 19 mm and cup distance C = 4,5 mm yield a<br />
distance D equal to 2,5 mm.<br />
Use of a mounting plate with D = 3 mm yields a door reveal of 2 mm<br />
(1,5 mm minimum reveal + 0,5 mm due to the difference between<br />
distance D and the mounting plate with D = 3 mm). However, if a door<br />
reveal of 1,5 mm is preferred, the gap must be reduced by 0,5 mm.<br />
Distance D increases proportionally if a larger door reveal is required.<br />
Example: Door thickness = 19 mm, cup distance C = 5 mm, required<br />
door reveal = 3 mm: 3 mm distance yield a minimum reveal of 1,5 mm<br />
+ 1,5 mm enlargement (value = required reveal – minimum reveal)<br />
= 4,5 mm required distance D. A mounting plate with D = 5 mm is used.<br />
The reveal is reduced by 0,5 mm with the aid of the overlay adjusting<br />
screw on the hinge arm.<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Distance D mm<br />
3 0,0 0,2 0,5 0,8 1,1 1,5 2,1 2,9 3,7 4,5 5,4<br />
4 1,0 1,2 1,4 1,7 2,0 2,4 2,9 3,5 4,3 5,1 5,9<br />
4,5 1,5 1,7 1,9 2,2 2,5 2,9 3,3 3,9 4,6 5,4 6,2<br />
5 2,0 2,2 2,4 2,7 3,0 3,3 3,8 4,3 4,9 5,7 6,5<br />
6 2,9 3,1 3,4 3,6 3,9 4,3 4,7 5,1 5,7 6,4 7,1<br />
±2 mm ±2 mm<br />
Using height-adjustable mounting<br />
plates makes it possible to align the<br />
exact door height.<br />
Direct, variable height adjustment<br />
with eccentric screw<br />
Characteristic for Intermat hinges is the ergonomical<br />
snap-on assembly. The hinge is slipped into the front<br />
of the mounting plate �, then a light finger pressure<br />
and the hinge arm latches onto the mounting plate � with an<br />
audible click.<br />
The hinge arm is now securely clamped, via five points, with zero<br />
play. Doors are clipped on zipper style from top to bottom - the top<br />
hinge alone is capable of taking the total weight of the door.<br />
Disassembly is carried out in the opposite direction from bottom to<br />
top. The hinge is unlatched by pressing lightly on latch � which is<br />
hidden under the side arm for security reasons. In one movement,<br />
the hinge arm is lifted off the mounting plate � and the door is<br />
removed from the cabinet �.<br />
Concealed hinges Intermat<br />
<strong>3.1.</strong>11
<strong>3.1.</strong>12<br />
Fast-assembly concealed hinge<br />
Intermat 9943<br />
Opening angle 110°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge for snap-on attachment<br />
• Door thickness from 15 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm / - 2,5 mm<br />
• Integrated cam depth adjustment ± 2 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Mounting options Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup T43<br />
Press-in<br />
Cup TB43<br />
Press-in<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Cup Flash<br />
Fast-assembly<br />
Concealed hinges Intermat www.hettich.com<br />
110°<br />
9943-T42 9943-T43 9943-TB43 9943-Flash<br />
0 048 049 0 048 053 0 048 056 0 048 059<br />
9943-T42 9943-T43 9943-TB43 9943-Flash<br />
0 048 051 0 048 054 0 048 057 0 048 061<br />
9943-T42 9943-T43 9943-TB43 9943-Flash<br />
0 048 052 0 048 055 0 048 058 0 048 062<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,5 0,7 1,0 1,3 1,6 2,0 2,6 3,4 4,2 5,0 5,9<br />
4 0,5 0,7 0,9 1,2 1,5 1,9 2,4 3,0 3,8 4,6 5,4<br />
4,5 0,5 0,7 0,9 1,2 1,5 1,9 2,3 2,9 3,6 4,4 5,2<br />
5 0,5 0,7 0,9 1,2 1,5 1,8 2,3 2,8 3,4 4,2 5,0<br />
6 0,4 0,6 0,9 1,1 1,4 1,8 2,2 2,6 3,2 3,9 4,6<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
T42 hole dimensions T43 hole dimensions/Flash TB43 hole dimensions<br />
Door<br />
Push-To-Open<br />
52<br />
Overlay<br />
Reveal<br />
Overlay<br />
Side<br />
Distance D<br />
2 x Reveal<br />
Side<br />
Reveal<br />
ø35<br />
C<br />
Distance D<br />
Cup distance C<br />
Side<br />
5,5<br />
Distance D<br />
11,8<br />
Distance D<br />
Cup distance C<br />
Cup distance C<br />
Door<br />
Door<br />
Door<br />
Door thickness<br />
52<br />
ø35<br />
11 11,8<br />
C<br />
5,5<br />
ø10<br />
45<br />
Fast-assembly concealed hinge<br />
Intermat 9943<br />
Opening angle 110°<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Cranking H T<br />
mm mm mm<br />
0,0 19,5 7,5<br />
9,5 29,0 17,0<br />
16,0 35,5 23,5<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Overlay mm<br />
C mm 0,5 1,5 2,5 3,5 4,5 5,5 6,5 7,5 8,5<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Distance D mm<br />
3 0,0 0,2 0,5 0,8 1,1 1,5 2,1 2,9 3,7 4,5 5,4<br />
4 1,0 1,2 1,4 1,7 2,0 2,4 2,9 3,5 4,3 5,1 5,9<br />
4,5 1,5 1,7 1,9 2,2 2,5 2,9 3,3 3,9 4,6 5,4 6,2<br />
5 2,0 2,2 2,4 2,7 3,0 3,3 3,8 4,3 4,9 5,7 6,5<br />
6 2,9 3,1 3,4 3,6 3,9 4,3 4,7 5,1 5,7 6,4 7,1<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
11<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,8<br />
Door<br />
Side<br />
110°<br />
Concealed hinges Intermat <strong>3.1.</strong>13<br />
T<br />
H<br />
66
<strong>3.1.</strong>14<br />
Fast-assembly concealed hinge<br />
Intermat 9943 FIX<br />
Opening angle 110°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge for snap-on attachment<br />
• Toolless cup assembly<br />
• Door thickness from 15 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment ± 2 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T FIX<br />
Toolless<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9943-T FIX 9943-TH FIX 9943-TB FIX<br />
0 048 063 0 048 066 0 048 071<br />
9943-T FIX 9943-TH FIX 9943-TB FIX<br />
0 048 064 0 048 068 0 048 072<br />
9943-T FIX 9943-TH FIX 9943-TB FIX<br />
0 048 065 0 048 069 0 048 073<br />
Concealed hinges Intermat www.hettich.com<br />
110°<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
PU<br />
1/50
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,5 0,7 1,0 1,3 1,6 2,0 2,6 3,4 4,2 5,0 5,9<br />
4 0,5 0,7 0,9 1,2 1,5 1,9 2,4 3,0 3,8 4,6 5,4<br />
4,5 0,5 0,7 0,9 1,2 1,5 1,9 2,3 2,9 3,6 4,4 5,2<br />
5 0,5 0,7 0,9 1,2 1,5 1,8 2,3 2,8 3,4 4,2 5,0<br />
6 0,4 0,6 0,9 1,1 1,4 1,8 2,2 2,6 3,2 3,9 4,6<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
T FIX hole dimensions TH FIX hole dimensions TB FIX hole dimensions<br />
Door<br />
Push-To-Open<br />
Overlay<br />
Reveal<br />
Overlay<br />
Side<br />
Distance D<br />
2 x Reveal<br />
Side<br />
Reveal<br />
ø35<br />
Distance D<br />
Cup distance C<br />
Side<br />
C<br />
Distance D<br />
11,8<br />
Distance D<br />
Cup distance C<br />
Cup distance C<br />
Door<br />
Door<br />
Door<br />
Door thickness<br />
52<br />
ø35<br />
6 11,8<br />
C<br />
5,5<br />
ø10<br />
45<br />
Fast-assembly concealed hinge<br />
Intermat 9943 FIX<br />
Opening angle 110°<br />
Cranking H T<br />
mm mm mm<br />
0,0 19,5 7,5<br />
9,5 29,0 17,0<br />
16,0 35,5 23,5<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Overlay mm<br />
C mm 0,5 1,5 2,5 3,5 4,5 5,5 6,5 7,5 8,5<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Distance D mm<br />
3 0,0 0,2 0,5 0,8 1,1 1,5 2,1 2,9 3,7 4,5 5,4<br />
4 1,0 1,2 1,4 1,7 2,0 2,4 2,9 3,5 4,3 5,1 5,9<br />
4,5 1,5 1,7 1,9 2,2 2,5 2,9 3,3 3,9 4,6 5,4 6,2<br />
5 2,0 2,2 2,4 2,7 3,0 3,3 3,8 4,3 4,9 5,7 6,5<br />
6 2,9 3,1 3,4 3,6 3,9 4,3 4,7 5,1 5,7 6,4 7,1<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
6<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,8<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Door<br />
Side<br />
110°<br />
Concealed hinges Intermat <strong>3.1.</strong>15<br />
T<br />
H<br />
66
<strong>3.1.</strong>16<br />
Fast-assembly concealed hinge<br />
Ecomat 9843<br />
Opening angle 110°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge for snap-on attachment<br />
• Door thickness from 15 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated depth adjustment ± 2 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Mounting options Article/Order no.<br />
Order no. PU<br />
0 079 790 1/50<br />
Cup T43<br />
Press-in<br />
Cup TB43<br />
Press-in<br />
Cup Flash<br />
Fast-assembly<br />
9843-T42 9843-T43 9843-TB43 9843-Flash<br />
0 079 258 0 079 261 0 079 042 0 070 018<br />
1 072 954 1 072 957 1 072 960 1 077 678<br />
9843-T42 9843-T43 9843-TB43 9843-Flash<br />
0 079 259 0 079 262 0 079 043 0 070 019<br />
1 072 955 1 072 958 – –<br />
9843-T42 9843-T43 9843-TB43 9843-Flash<br />
0 079 260 0 079 263 0 079 044 0 070 020<br />
1 072 956 1 072 959 – –<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T 42<br />
• Nickel-plated steel<br />
Concealed hinges Ecomat www.hettich.com<br />
110°<br />
PU<br />
1/50<br />
200<br />
PU<br />
1/50<br />
200<br />
PU<br />
1/50<br />
200<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,5 0,7 1,0 1,3 1,6 2,0 2,6 3,4 4,2 5,0 5,9<br />
4 0,5 0,7 0,9 1,2 1,5 1,9 2,4 3,0 3,8 4,6 5,4<br />
4,5 0,5 0,7 0,9 1,2 1,5 1,9 2,3 2,9 3,6 4,4 5,2<br />
5 0,5 0,7 0,9 1,2 1,5 1,8 2,3 2,8 3,4 4,2 5,0<br />
6 0,4 0,6 0,9 1,1 1,4 1,8 2,2 2,6 3,2 3,9 4,6<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
T42 hole dimensions T43 hole dimensions/Flash TB43 hole dimensions<br />
Overlay<br />
Reveal<br />
Overlay<br />
Door<br />
Push-To-Open<br />
52<br />
Side<br />
Distance D<br />
2 x Reveal<br />
Side<br />
Reveal<br />
ø35<br />
Distance D<br />
Cup distance C<br />
Side<br />
C<br />
Distance D<br />
5,5<br />
11,8<br />
Door<br />
Distance D<br />
Cup distance C<br />
Cup distance C<br />
Door<br />
Door<br />
Door thickness<br />
52<br />
ø35<br />
11 11,8<br />
C<br />
5,5<br />
ø10<br />
Fast-assembly concealed hinge<br />
Ecomat 9843<br />
Opening angle 110°<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Overlay mm<br />
C mm 0,5 1,5 2,5 3,5 4,5 5,5 6,5 7,5 8,5<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Distance D mm<br />
3 0,0 0,2 0,5 0,8 1,1 1,5 2,1 2,9 3,7 4,5 5,4<br />
4 1,0 1,2 1,4 1,7 2,0 2,4 2,9 3,5 4,3 5,1 5,9<br />
4,5 1,5 1,7 1,9 2,2 2,5 2,9 3,3 3,9 4,6 5,4 6,2<br />
5 2,0 2,2 2,4 2,7 3,0 3,3 3,8 4,3 4,9 5,7 6,5<br />
6 2,9 3,1 3,4 3,6 3,9 4,3 4,7 5,1 5,7 6,4 7,1<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
45<br />
11<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,8<br />
Door<br />
Side<br />
Cranking H T<br />
mm mm mm<br />
0,0 19,5 7,5<br />
9,5 29,0 17,0<br />
16,0 35,5 23,5<br />
T<br />
H<br />
110°<br />
Concealed hinges Ecomat <strong>3.1.</strong>17<br />
60
<strong>3.1.</strong>18<br />
Fast-assembly concealed hinge<br />
Ecomat 9843 FIX<br />
Opening angle 110°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge for snap-on attachment<br />
• Toolless cup assembly<br />
• Door thickness from 15 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated depth adjustment ± 2 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T FIX<br />
Toolless<br />
Article/Order no.<br />
Order no. PU<br />
0 079 790 1/50<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9843-T FIX 9843-TH FIX 9843-TB FIX<br />
0 079 045 0 079 048 0 079 051<br />
1 073 350 1 073 347 1 073 353<br />
9843-T FIX 9843-TH FIX 9843-TB FIX<br />
0 079 046 0 079 049 0 079 052<br />
– 1 073 348 –<br />
9843-T FIX 9843-TH FIX 9843-TB FIX<br />
0 079 047 0 079 050 0 079 053<br />
– 1 073 349 –<br />
Concealed hinges Ecomat www.hettich.com<br />
110°<br />
PU<br />
1/50<br />
200<br />
PU<br />
1/50<br />
200<br />
PU<br />
1/50<br />
200
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,5 0,7 1,0 1,3 1,6 2,0 2,6 3,4 4,2 5,0 5,9<br />
4 0,5 0,7 0,9 1,2 1,5 1,9 2,4 3,0 3,8 4,6 5,4<br />
4,5 0,5 0,7 0,9 1,2 1,5 1,9 2,3 2,9 3,6 4,4 5,2<br />
5 0,5 0,7 0,9 1,2 1,5 1,8 2,3 2,8 3,4 4,2 5,0<br />
6 0,4 0,6 0,9 1,1 1,4 1,8 2,2 2,6 3,2 3,9 4,6<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
Push-To-Open<br />
Reveal<br />
Overlay<br />
Door<br />
Side<br />
Overlay<br />
Distance D<br />
2 x Reveal<br />
Side<br />
Reveal<br />
ø35<br />
Distance D<br />
Cup distance C<br />
Side<br />
C<br />
Distance D<br />
11,8<br />
Door<br />
Distance D<br />
Cup distance C<br />
Door<br />
Door<br />
Door thickness<br />
Cup distance C<br />
52<br />
T FIX hole dimensions TH FIX hole dimensions TB FIX hole dimensions<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
6 11,8<br />
C<br />
5,5<br />
ø10<br />
45<br />
Fast-assembly concealed hinge<br />
Ecomat 9843 FIX<br />
Opening angle 110°<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Door<br />
Side<br />
Cranking H T<br />
mm mm mm<br />
0,0 19,5 7,5<br />
9,5 29,0 17,0<br />
16,0 35,5 23,5<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Overlay mm<br />
C mm 0,5 1,5 2,5 3,5 4,5 5,5 6,5 7,5 8,5<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Distance D mm<br />
3 0,0 0,2 0,5 0,8 1,1 1,5 2,1 2,9 3,7 4,5 5,4<br />
4 1,0 1,2 1,4 1,7 2,0 2,4 2,9 3,5 4,3 5,1 5,9<br />
4,5 1,5 1,7 1,9 2,2 2,5 2,9 3,3 3,9 4,6 5,4 6,2<br />
5 2,0 2,2 2,4 2,7 3,0 3,3 3,8 4,3 4,9 5,7 6,5<br />
6 2,9 3,1 3,4 3,6 3,9 4,3 4,7 5,1 5,7 6,4 7,1<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
6<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,8<br />
110°<br />
Concealed hinges Ecomat <strong>3.1.</strong>19<br />
T<br />
H<br />
60
<strong>3.1.</strong>20<br />
Fast-assembly concealed hinge<br />
Intermat 9944<br />
Opening angle 125°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Overlay door<br />
Overlay door<br />
• Concealed hinge for snap-on attachment<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 2,5 mm/- 1,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Mounting options Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup T43<br />
Press-in<br />
Cup TB43<br />
Press-in<br />
Cup Flash<br />
Fast-assembly<br />
Concealed hinges Intermat www.hettich.com<br />
125°<br />
9944-T42 9944-T43 9944-TB43 9944-Flash<br />
0 073 905 0 073 906 0 073 907 0 073 908<br />
9944-T42 9944-T43 9944-TB43 9944-Flash<br />
0 073 909 0 073 910 0 073 911 0 073 912<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25 26 27 28<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 1,0 1,2 1,5 1,9 2,3 2,7 3,3 3,9 4,7 5,4 6,3 7,1 8,0 8,9<br />
4 0,9 1,2 1,5 1,8 2,2 2,6 3,1 3,7 4,3 5,1 5,8 6,7 7,5 8,4<br />
4,5 0,9 1,2 1,5 1,8 2,2 2,6 3,0 3,6 4,2 4,9 5,7 6,4 7,3 8,1<br />
5 0,9 1,1 1,4 1,8 2,1 2,5 3,0 3,5 4,1 4,8 5,5 6,2 7,0 7,9<br />
5,5 0,9 1,1 1,4 1,7 2,1 2,5 2,9 3,4 4,0 4,6 5,3 6,1 6,8 7,6<br />
6 0,9 1,1 1,4 1,7 2,0 2,4 2,9 3,3 3,9 4,5 5,2 5,9 6,6 7,4<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
Door<br />
Push-To-Open<br />
52<br />
Side<br />
Overlay<br />
Reveal<br />
Distance D<br />
Overlay<br />
2 x Reveal<br />
ø35<br />
T42 hole dimensions T43 hole dimensions/Flash TB43 hole dimensions<br />
Distance D<br />
Cup distance C<br />
Side<br />
C<br />
5,5<br />
12,8<br />
Distance D<br />
Cup distance C<br />
Door<br />
Door<br />
52<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
11 12,8<br />
C<br />
5,5<br />
ø10<br />
45<br />
Fast-assembly concealed hinge<br />
Intermat 9944<br />
Opening angle 125°<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5,5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 8<br />
Distance D mm<br />
3 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
11<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
12,8<br />
Side<br />
Door<br />
Cranking H T<br />
mm mm mm<br />
0,0 19,5 8,5<br />
9,5 29,0 18,0<br />
Concealed hinges Intermat <strong>3.1.</strong>21<br />
T<br />
H<br />
125°<br />
66
<strong>3.1.</strong>22<br />
Fast-assembly concealed hinge<br />
Intermat 9944 FIX<br />
Opening angle 125°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
• Concealed hinge for snap-on attachment<br />
• Toolless cup assembly<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 2,5 mm/- 1,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T FIX<br />
Toolless<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9944-T FIX 9944-TH FIX 9944-TB FIX<br />
0 077 647 0 077 648 0 077 649<br />
9944-T FIX 9944-TH FIX 9944-TB FIX<br />
0 077 650 0 077 651 0 077 652<br />
Concealed hinges Intermat www.hettich.com<br />
125°<br />
PU<br />
1/50<br />
PU<br />
1/50
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25 26 27 28<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 1,0 1,2 1,5 1,9 2,3 2,7 3,3 3,9 4,7 5,4 6,3 7,1 8,0 8,9<br />
4 0,9 1,2 1,5 1,8 2,2 2,6 3,1 3,7 4,3 5,1 5,8 6,7 7,5 8,4<br />
4,5 0,9 1,2 1,5 1,8 2,2 2,6 3,0 3,6 4,2 4,9 5,7 6,4 7,3 8,1<br />
5 0,9 1,1 1,4 1,8 2,1 2,5 3,0 3,5 4,1 4,8 5,5 6,2 7,0 7,9<br />
5,5 0,9 1,1 1,4 1,7 2,1 2,5 2,9 3,4 4,0 4,6 5,3 6,1 6,8 7,6<br />
6 0,9 1,1 1,4 1,7 2,0 2,4 2,9 3,3 3,9 4,5 5,2 5,9 6,6 7,4<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
Door<br />
Push-To-Open<br />
Overlay<br />
Reveal<br />
Overlay<br />
Side<br />
Distance D<br />
2 x Reveal<br />
ø35<br />
Distance D<br />
Cup distance C<br />
Side<br />
C<br />
12,8<br />
Distance D<br />
Cup distance C<br />
Door<br />
Door<br />
52<br />
T FIX hole dimensions TH FIX hole dimensions TB FIX hole dimensions<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
6 12,8<br />
C<br />
5,5<br />
ø10<br />
45<br />
Fast-assembly concealed hinge<br />
Intermat 9944 FIX<br />
Opening angle 125°<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5,5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 8<br />
Distance D mm<br />
3 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
6<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
12,8<br />
Side<br />
Door<br />
Cranking H T<br />
mm mm mm<br />
0,0 19,5 8,5<br />
9,5 29,0 18,0<br />
Concealed hinges Intermat <strong>3.1.</strong>23<br />
T<br />
H<br />
125°<br />
66
<strong>3.1.</strong>24<br />
Fast-assembly concealed hinge<br />
Intermat 9956<br />
Opening angle 165° - 120°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Overlay door<br />
Overlay door<br />
• Concealed hinge for snap-on attachment<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Ideal reveals (hairline reveal)<br />
• No door protrusion, i.e. unobstructed interior for pull-outs<br />
• Opening angle can be reduced to 120° by infinitely variable amounts (for adjusting<br />
screw, see page below)<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 1,7 mm/- 2,3 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Mounting options Article/Order no.<br />
120°<br />
Order no. PU<br />
0 048 296 200<br />
Cup T43<br />
Press-in<br />
165°<br />
Cup TB43<br />
Press-in<br />
Adjustment screw M5 x14 mm<br />
• Nickel-plated steel<br />
Cup Flash<br />
Fast-assembly<br />
Opening angle 165° – the<br />
M5x14 mm adjusting screw<br />
can be used for reducing the<br />
opening angle to 120° by<br />
infinitely variable amounts.<br />
Concealed hinges Intermat www.hettich.com<br />
120°<br />
-<br />
165°<br />
9956-T42 9956-T43 9956-TB43 9956-Flash<br />
0 072 947 0 072 948 0 072 949 0 072 124<br />
9956-T42 9956-T43 9956-TB43 9956-Flash<br />
0 072 961 0 072 962 0 072 963 0 072 964<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 079 791 50
Cup distance Door thickness mm<br />
C mm 16 17 18 19<br />
Push-To-Open<br />
Minimum reveal per door<br />
3 0 0 0 0<br />
4 0 0 0 0<br />
4,5 0 0 0 0<br />
5 0 0 0 0<br />
6 0 0 0 0<br />
T42 hole dimensions T43 hole dimensions/Flash TB43 hole dimensions<br />
Overlay<br />
Door<br />
Side<br />
Reveal<br />
52<br />
Side<br />
Overlay<br />
Reveal<br />
Distance D<br />
2 x Reveal<br />
Distance D<br />
ø35<br />
Distance D<br />
Cup distance C<br />
Side<br />
Cup distance C<br />
C<br />
5,5<br />
11,6<br />
Distance D<br />
Cup distance C<br />
Door<br />
Door<br />
Door<br />
Door thickness<br />
52<br />
The minimum reveal for doors up to 19 mm thick<br />
is 0 mm. A trial assembly is recommended for doors<br />
thicker than 19 mm (max. door thickness 25 mm).<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
11 11,6<br />
C<br />
5,5<br />
ø10<br />
Fast-assembly concealed hinge<br />
Intermat 9956<br />
Opening angle 165° - 120°<br />
No door protrusion T<br />
for 0 mm distance and<br />
3 mm cup distance,<br />
unrestricted runner<br />
movement<br />
Cranking H T<br />
mm mm mm<br />
0,0 58,5 -0,8<br />
9,5 68,0 8,7<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 8<br />
Distance D mm<br />
3 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
6 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Reveal 1 mm<br />
C mm<br />
Distance D mm<br />
3 8,0<br />
4 9,0<br />
4,5 9,5<br />
5 10,0<br />
6 11,0<br />
45<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
11<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,8<br />
Door<br />
Hole-line position<br />
for inset mounting =<br />
37 mm + Door thickness + 1 mm<br />
Side<br />
165°<br />
Concealed hinges Intermat <strong>3.1.</strong>25<br />
T<br />
H<br />
66,5
<strong>3.1.</strong>26<br />
Fast-assembly concealed hinge<br />
Intermat 9956 FIX<br />
Opening angle 165° - 120°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Mounting options Article/Order no.<br />
Overlay door<br />
Overlay door<br />
• Concealed hinge for snap-on attachment<br />
• Toolless cup assembly<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Ideal reveals (hairline reveal)<br />
• No door protrusion, i.e. unobstructed interior for pull-outs<br />
• Opening angle can be reduced to 120° by infinitely variable amounts<br />
(for adjusting screw, see page below)<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 1,7 mm/- 2,3 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T FIX<br />
Toolless<br />
120°<br />
165°<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Adjustment screw M5 x14 mm<br />
• Nickel-plated steel<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9956-T FIX 9956-TH FIX 9956-TB FIX<br />
0 077 659 0 077 660 0 077 661<br />
9956-T FIX 9956-TH FIX 9956-TB FIX<br />
0 077 665 0 077 666 0 077 667<br />
Opening angle 165° – the<br />
M5x14 mm adjusting screw<br />
can be used for reducing the<br />
opening angle to 120° by infinitely<br />
variable amounts.<br />
Concealed hinges Intermat www.hettich.com<br />
max. 7<br />
120°<br />
-<br />
165°<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 079 791 50
Cup distance Door thickness mm<br />
C mm 16 17 18 19<br />
Push-To-Open<br />
Minimum reveal per door<br />
3 0 0 0 0<br />
4 0 0 0 0<br />
4,5 0 0 0 0<br />
5 0 0 0 0<br />
6 0 0 0 0<br />
Overlay<br />
Door<br />
Side<br />
Reveal<br />
Side<br />
Overlay<br />
Reveal<br />
Distance D<br />
2 x Reveal<br />
Distance D<br />
ø35<br />
Distance D<br />
Cup distance C<br />
Side<br />
Cup distance C<br />
C<br />
11,6<br />
Distance D<br />
Cup distance C<br />
Door<br />
Door<br />
Door<br />
Door thickness<br />
52<br />
The minimum reveal for doors up to 19 mm thick<br />
is 0 mm. A trial assembly is recommended for doors<br />
thicker than 19 mm (max. door thickness 25 mm).<br />
T FIX hole dimensions TH FIX hole dimensions TB FIX hole dimensions<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
6 11,6<br />
C<br />
5,5<br />
ø10<br />
Fast-assembly concealed hinge<br />
Intermat 9956 FIX<br />
Opening angle 165° - 120°<br />
No door protrusion T<br />
for 0 mm distance and<br />
3 mm cup distance,<br />
unrestricted runner<br />
movement<br />
Cranking H T<br />
mm mm mm<br />
0,0 58,5 -0,8<br />
9,5 68,0 8,7<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 8<br />
Distance D mm<br />
3 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
6 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Reveal 1 mm<br />
C mm<br />
Distance D mm<br />
3 8,0<br />
4 9,0<br />
4,5 9,5<br />
5 10,0<br />
6 11,0<br />
45<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
6<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,6<br />
Door<br />
Hole-line position<br />
for inset mounting =<br />
37 mm + Door thickness + 1 mm<br />
Side<br />
165°<br />
Concealed hinges Intermat <strong>3.1.</strong>27<br />
T<br />
H<br />
66,5
<strong>3.1.</strong>28<br />
Fast-assembly concealed hinge<br />
Intermat 9936<br />
for profile doors up to 32 mm, opening angle 95°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Mounting options Article/Order no.<br />
• Concealed hinge for snap-on attachment<br />
• Door thickness from 15 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Ideal reveals for doors with profile (hairline reveal)<br />
• For technical details of door contours, see page <strong>3.1.</strong>32<br />
• Integrated overlay adjustment ± 2,5 mm<br />
• Integrated cam depth adjustment + 2,2 mm/- 1,8 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup T43<br />
Press-in<br />
Cup TB43<br />
Press-in<br />
Concealed hinges Intermat www.hettich.com<br />
95°<br />
Cup Flash<br />
Fast-assembly<br />
9936-T42 9936-T43 9936-TB43 9936-Flash<br />
0 073 913 0 073 914 0 073 915 0 073 916<br />
9936-T42 9936-T43 9936-TB43 9936-Flash<br />
0 073 917 0 073 918 0 073 919 0 073 920<br />
9936-T42 9936-T43 9936-TB43 9936-Flash<br />
0 073 921 0 073 922 0 073 923 0 073 924<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,3 0,4 0,6 0,8 1,0 1,3 1,5 1,8 2,2 2,6 3,0 3,6 4,4 5,3 6,2 7,1 8,0 8,9<br />
4 0,3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,8 5,7 6,5 7,4 8,3<br />
4,5 0,3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,3 3,9 4,6 5,4 6,3 7,1 8,0<br />
5 0,3 0,4 0,6 0,8 1,0 1,2 1,5 1,7 2,1 2,4 2,8 3,3 3,8 4,5 5,2 6,0 6,9 7,8<br />
6 0,3 0,4 0,6 0,7 0,9 1,2 1,4 1,7 2,0 2,3 2,7 3,1 3,6 4,2 4,9 5,6 6,4 7,3<br />
7 0,3 0,4 0,5 0,7 0,9 1,1 1,4 1,7 2,0 2,3 2,6 3,0 3,5 4,0 4,6 5,3 6,0 6,8<br />
8 0,3 0,4 0,5 0,7 0,9 1,1 1,4 1,6 1,9 2,2 2,6 3,0 3,4 3,8 4,4 5,0 5,7 6,4<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
T42 hole dimensions T43 hole dimensions/Flash TB43 hole dimensions<br />
Push-To-Open<br />
52<br />
Overlay<br />
Reveal<br />
Overlay<br />
Door<br />
Side<br />
ø35<br />
Distance D<br />
Side<br />
Reveal<br />
2 x Reveal<br />
C<br />
5,5<br />
11,3<br />
Distance D<br />
Cup distance C<br />
Side<br />
Distance D<br />
Door<br />
Distance D<br />
Cup distance C<br />
Door<br />
Cup distance C<br />
Door<br />
Door thickness<br />
52<br />
11 11,3<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
C<br />
5,5<br />
ø10<br />
Fast-assembly concealed hinge<br />
Intermat 9936<br />
for profile doors up to 32 mm, opening angle 95°<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18 19 20<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
7 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
8 10,5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment ± 2,5 mm<br />
Cranking H T<br />
mm mm mm<br />
0,0 19,5 10,0<br />
9,5 29,0 19,5<br />
16,0 35,5 26,0<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 8 9 10 11<br />
Distance D mm<br />
3 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
6 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
7 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
8 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
Overlay adjustment ± 2,5 mm<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
3<br />
Distance D mm<br />
-0,2 -0,1 0,1 0,3 0,5 0,8 1,0 1,3 1,7 2,1 2,5 3,1 3,9 4,8 5,7 6,6 7,5 8,4<br />
4 0,8 0,9 1,1 1,3 1,5 1,7 2,0 2,3 2,6 3,0 3,4 3,9 4,5 5,3 6,2 7,0 7,9 8,8<br />
4,5 1,3 1,4 1,6 1,8 2,0 2,2 2,5 2,8 3,1 3,5 3,9 4,3 4,9 5,6 6,4 7,3 8,1 9,0<br />
5 1,8 1,9 2,1 2,3 2,5 2,7 3,0 3,2 3,6 3,9 4,3 4,8 5,3 6,0 6,7 7,5 8,4 9,3<br />
6 2,8 2,9 3,1 3,2 3,4 3,7 3,9 4,2 4,5 4,8 5,2 5,6 6,1 6,7 7,4 8,1 8,9 9,8<br />
7 3,8 3,9 4,0 4,2 4,4 4,6 4,9 5,2 5,5 5,8 6,1 6,5 7,0 7,5 8,1 8,8 9,5 10,3<br />
8 4,8 4,9 5,0 5,2 5,4 5,6 5,9 6,1 6,4 6,7 7,1 7,5 7,9 8,3 8,9 9,5 10,2 10,9<br />
Reveal adjustment ± 2,5 mm<br />
45<br />
11<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,3<br />
Door<br />
Side<br />
95°<br />
Concealed hinges Intermat <strong>3.1.</strong>29<br />
T<br />
H<br />
66
<strong>3.1.</strong>30<br />
Fast-assembly concealed hinge<br />
Intermat 9936 FIX<br />
for profile doors up to 32 mm, opening angle 95°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge for snap-on attachment<br />
• Toolless cup assembly<br />
• Door thickness from 15 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Ideal reveals for doors with profile (hairline reveal)<br />
• For technical details of door contours, see page <strong>3.1.</strong>32<br />
• Integrated overlay adjustment ± 2,5 mm<br />
• Integrated cam depth adjustment + 1,7 mm/- 2,3 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T FIX<br />
Toolless<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9936-T FIX 9936-TH FIX 9936-TB FIX<br />
0 077 671 0 077 672 0 077 673<br />
9936-T FIX 9936-TH FIX 9936-TB FIX<br />
0 077 674 0 077 675 0 077 676<br />
9936-T FIX 9936-TH FIX 9936-TB FIX<br />
0 077 677 0 077 678 0 077 679<br />
Concealed hinges Intermat www.hettich.com<br />
95°<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
PU<br />
1/50
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,3 0,4 0,6 0,8 1,0 1,3 1,5 1,8 2,2 2,6 3,0 3,6 4,4 5,3 6,2 7,1 8,0 8,9<br />
4 0,3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,8 5,7 6,5 7,4 8,3<br />
4,5 0,3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,3 3,9 4,6 5,4 6,3 7,1 8,0<br />
5 0,3 0,4 0,6 0,8 1,0 1,2 1,5 1,7 2,1 2,4 2,8 3,3 3,8 4,5 5,2 6,0 6,9 7,8<br />
6 0,3 0,4 0,6 0,7 0,9 1,2 1,4 1,7 2,0 2,3 2,7 3,1 3,6 4,2 4,9 5,6 6,4 7,3<br />
7 0,3 0,4 0,5 0,7 0,9 1,1 1,4 1,7 2,0 2,3 2,6 3,0 3,5 4,0 4,6 5,3 6,0 6,8<br />
8 0,3 0,4 0,5 0,7 0,9 1,1 1,4 1,6 1,9 2,2 2,6 3,0 3,4 3,8 4,4 5,0 5,7 6,4<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
ø35<br />
C<br />
11,8<br />
52<br />
ø35<br />
6 11,8<br />
T FIX hole dimensions TH FIX hole dimensions TB FIX hole dimensions<br />
Push-To-Open<br />
Overlay<br />
Reveal<br />
Overlay<br />
Door<br />
Side<br />
Distance D<br />
Side<br />
Reveal<br />
2 x Reveal<br />
Distance D<br />
Cup distance C<br />
Side<br />
Distance D<br />
Door<br />
Distance D<br />
Cup distance C<br />
Door<br />
Cup distance C<br />
Door<br />
Door thickness<br />
C<br />
5,5<br />
ø10<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Fast-assembly concealed hinge<br />
Intermat 9936 FIX<br />
for profile doors up to 32 mm, opening angle 95°<br />
45<br />
6<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18 19 20<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
7 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
8 10,5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment ± 2,5 mm<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,8<br />
Cranking H T<br />
mm mm mm<br />
0,0 19,5 10,5<br />
9,5 29,0 20,0<br />
16,0 35,5 25,5<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 8 9 10 11<br />
Distance D mm<br />
3 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
6 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
7 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
8 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
Overlay adjustment ± 2,5 mm<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Distance D mm<br />
3 -0,2 -0,1 0,1 0,3 0,5 0,8 1,0 1,3 1,7 2,1 2,5 3,1 3,9 4,8 5,7 6,6 7,5 8,4<br />
4 0,8 0,9 1,1 1,3 1,5 1,7 2,0 2,3 2,6 3,0 3,4 3,9 4,5 5,3 6,2 7,0 7,9 8,8<br />
4,5 1,3 1,4 1,6 1,8 2,0 2,2 2,5 2,8 3,1 3,5 3,9 4,3 4,9 5,6 6,4 7,3 8,1 9,0<br />
5 1,8 1,9 2,1 2,3 2,5 2,7 3,0 3,2 3,6 3,9 4,3 4,8 5,3 6,0 6,7 7,5 8,4 9,3<br />
6 2,8 2,9 3,1 3,2 3,4 3,7 3,9 4,2 4,5 4,8 5,2 5,6 6,1 6,7 7,4 8,1 8,9 9,8<br />
7 3,8 3,9 4,0 4,2 4,4 4,6 4,9 5,2 5,5 5,8 6,1 6,5 7,0 7,5 8,1 8,8 9,5 10,3<br />
8 4,8 4,9 5,0 5,2 5,4 5,6 5,9 6,1 6,4 6,7 7,1 7,5 7,9 8,3 8,9 9,5 10,2 10,9<br />
Reveal adjustment ± 2,5 mm<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Door<br />
Side<br />
95°<br />
Concealed hinges Intermat <strong>3.1.</strong>31<br />
T<br />
H<br />
66
<strong>3.1.</strong>32<br />
Door contours<br />
for hairline reveal<br />
with Intermat 9936/9936 FIX<br />
The entries in the table for "minimum door reveal" refer<br />
to door edges with sharp corners.<br />
Reveal values improve when door edges<br />
are rounded.<br />
For a hair line reveal, the selected door contour must lie<br />
inside the maximum possible door contour based on the<br />
cup distance. All contours protruding over the template<br />
will increase the reveal correspondingly.<br />
C= 8<br />
Example<br />
Example for<br />
hairline reveal<br />
Door thickness 16 mm<br />
Profile thickness 12 mm<br />
Total thickness 28 mm<br />
Cup distance C 6 mm<br />
6<br />
4<br />
Template of the maximum possible door contour,<br />
based on the cup distance C<br />
Scale 1:1<br />
4<br />
6<br />
8<br />
Example for<br />
hairline reveal<br />
Door thickness 19 mm<br />
Profile thickness 11 mm<br />
Total thickness 30 mm<br />
Cup distance C 8 mm<br />
Concealed hinges Intermat www.hettich.com<br />
26<br />
28<br />
30<br />
4<br />
6<br />
Hairline reveal<br />
8
Hairline reveal<br />
The entries in the table for "minimum door reveal" refer<br />
to door edges with sharp corners.<br />
Reveal values improve when door edges<br />
are rounded.<br />
For a hair line reveal, the selected door contour must lie<br />
inside the maximum possible door contour based on the<br />
cup distance. All contours protruding over the template<br />
will increase the reveal correspondingly.<br />
C =<br />
Example<br />
10<br />
Example for<br />
hairline reveal<br />
Door thickness 19 mm<br />
Profile thickness 13 mm<br />
Total thickness 32 mm<br />
Cup distance C 4 mm<br />
8<br />
6<br />
4<br />
Template of the maximum possible door contour,<br />
based on the cup distance C<br />
4<br />
Scale 1:1<br />
6<br />
8<br />
10<br />
32<br />
Example for<br />
hairline reveal<br />
Door thickness 19 mm<br />
Profile thickness 19 mm<br />
Total thickness 38 mm<br />
Cup distance C 10 mm<br />
34<br />
Door contours<br />
for hairline reveal<br />
with Intermat 9935<br />
36<br />
38<br />
4<br />
Concealed hinges Intermat <strong>3.1.</strong>33<br />
6<br />
8<br />
10
<strong>3.1.</strong>34<br />
Fast-assembly concealed hinge<br />
Intermat 9935<br />
for profile doors up to 43 mm, opening angle 95°<br />
Hinge versions<br />
Cranking -5 mm<br />
Cranking 5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Cup versions<br />
Cup T22/40<br />
Screw on<br />
Mounting options Article/Order no.<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge for snap-on attachment<br />
• Door thickness from 16 mm<br />
• Cup diameter 40 mm<br />
• With self-closing feature<br />
• Ideal reveals for doors with profile (hairline reveal)<br />
• For technical details of door contours, see page <strong>3.1.</strong>33<br />
• Integrated overlay adjustment + 0,5 mm/- 3,0 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated die-cast zinc<br />
9935-T22/40<br />
0 073 925<br />
9935-T22/40<br />
0 073 926<br />
9935-T22/40<br />
0 073 927<br />
Order no. PU<br />
0 013 300 1/50<br />
Distance D<br />
Concealed hinges Intermat www.hettich.com<br />
PU<br />
1/ 10<br />
PU<br />
1/ 10<br />
PU<br />
1/ 10<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Side<br />
Overlay<br />
Reveal<br />
Overlay<br />
Door<br />
Distance D<br />
2 x Reveal<br />
Side<br />
Reveal<br />
95°<br />
Cup distance C<br />
Side<br />
Distance D<br />
Distance D<br />
Door<br />
Door<br />
Cup distance C<br />
Cup distance C<br />
Door<br />
Door thickness<br />
Order no. PU<br />
0 048 296 200
Fast-assembly concealed hinge<br />
Intermat 9935<br />
for profile doors up to 43 mm, opening angle 95°<br />
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3<br />
4<br />
4,5<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
0<br />
0<br />
0<br />
0<br />
0<br />
0<br />
0<br />
0<br />
0<br />
0<br />
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,9 1,1 1,3 1,5 1,7 1,9 2,1 2,4 3,2 4,1 4,9<br />
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,9 1,1 1,3 1,5 1,7 1,9 2,1 2,4 2,9 3,4 3,9<br />
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,9 1,1 1,3 1,5 1,7 1,9 2,1 2,4 2,9 3,4 3,9<br />
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,9 1,1 1,3 1,5 1,7 1,9 2,1 2,4 2,8 3,2 3,6<br />
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,9 1,1 1,3 1,5 1,7 1,9 2,1 2,4 2,8 3,2 3,6<br />
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,3 2,7 3,0 3,4<br />
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,3 2,6 2,9 3,2<br />
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,3 2,6 2,9 3,2<br />
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,3 2,6 2,8 3,1<br />
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 1,0 1,2 1,3 1,5 1,7 1,9 2,2 2,4 2,6 2,8<br />
5,8<br />
4,5<br />
4,3<br />
4,1<br />
3,9<br />
3,7<br />
3,5<br />
3,4<br />
3,3<br />
3,1<br />
6,8<br />
5,6<br />
5,4<br />
5,1<br />
4,8<br />
4,5<br />
4,2<br />
4,0<br />
3,8<br />
3,5<br />
7,8<br />
6,7<br />
6,5<br />
6,2<br />
5,8<br />
5,4<br />
4,9<br />
4,6<br />
4,3<br />
3,9<br />
8,8<br />
7,8<br />
7,5<br />
7,2<br />
6,7<br />
6,2<br />
5,6<br />
5,2<br />
4,8<br />
4,3<br />
9,7 10,7 11,7<br />
9,0 10,0 11,0<br />
8,7 9,7 10,6<br />
8,3 9,3 10,3<br />
7,7 8,7 9,7<br />
7,1 8,0 8,9<br />
6,4 7,3 8,2<br />
5,9 6,8 7,7<br />
5,3 6,2 7,1<br />
4,7 5,4 6,1<br />
12,6<br />
11,9<br />
11,6<br />
11,2<br />
10,6<br />
9,9<br />
9,1<br />
8,5<br />
7,9<br />
6,9<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm / 3 mm radius: table entry – 1,2 mm<br />
52<br />
ø40<br />
T22/40 hole dimensions<br />
C<br />
5,5<br />
13,8<br />
Hinge protrusion H/door protrusion T<br />
for 0 mm distance and 3 mm cup distance<br />
Cranking mm H mm T mm<br />
- 5 20 10,5<br />
5 30 20,5<br />
16 41 31,5<br />
Cup distance Overlay mm<br />
C mm 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29<br />
Distance D mm<br />
3 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 10,5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
6 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
7 13,0 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
8 14,0 13,0 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
9 15,0 14,0 13,0 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
10 16,0 15,0 14,0 13,0 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
11 17,0 16,0 15,0 14,0 13,0 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19<br />
Distance D mm<br />
3 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 12,5 11,5 10,5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5 13,0 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
6 14,0 13,0 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
7 15,0 14,0 13,0 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
8 16,0 15,0 14,0 13,0 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
9 17,0 16,0 15,0 14,0 13,0 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
10 18,0 17,0 16,0 15,0 14,0 13,0 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
11 19,0 18,0 17,0 16,0 15,0 14,0 13,0 12,0 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
36 37 38 39 40 41 42 43<br />
Side<br />
Door<br />
T<br />
Concealed hinges Intermat <strong>3.1.</strong>35<br />
H<br />
95°<br />
65<br />
Overlay adjustment<br />
+ 0,5 mm / - 3 mm<br />
Overlay adjustment<br />
+ 0,5 mm/- 3 mm<br />
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43<br />
Distance D mm<br />
3<br />
4<br />
4,5<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
1,0<br />
1,5<br />
2,0<br />
3,0<br />
4,0<br />
5,0<br />
6,0<br />
7,0<br />
8,0<br />
1,0<br />
1,5<br />
2,0<br />
3,0<br />
4,0<br />
5,0<br />
6,0<br />
7,0<br />
8,0<br />
1,1<br />
1,6<br />
2,1<br />
3,1<br />
4,1<br />
5,1<br />
6,1<br />
7,1<br />
8,1<br />
1,2<br />
1,7<br />
2,3<br />
3,2<br />
4,2<br />
5,2<br />
6,2<br />
7,2<br />
8,2<br />
1,3<br />
1,8<br />
2,3<br />
3,3<br />
4,3<br />
5,3<br />
6,3<br />
7,3<br />
8,3<br />
1,4<br />
1,9<br />
2,4<br />
3,4<br />
4,4<br />
5,4<br />
6,4<br />
7,4<br />
8,4<br />
0,5<br />
1,5<br />
2,0<br />
2,5<br />
3,5<br />
4,5<br />
5,5<br />
6,5<br />
7,5<br />
8,5<br />
0,6<br />
1,6<br />
2,1<br />
2,6<br />
3,6<br />
4,6<br />
5,6<br />
6,6<br />
7,6<br />
8,6<br />
0,7<br />
1,7<br />
2,2<br />
2,7<br />
3,7<br />
4,7<br />
5,7<br />
6,7<br />
7,7<br />
8,7<br />
0,9<br />
1,9<br />
2,4<br />
2,9<br />
3,9<br />
4,8<br />
5,8<br />
6,8<br />
7,8<br />
8,8<br />
1,1<br />
2,1<br />
2,6<br />
3,1<br />
4,1<br />
5,0<br />
6,0<br />
7,0<br />
8,0<br />
9,0<br />
1,3<br />
2,3<br />
2,8<br />
3,3<br />
4,3<br />
5,2<br />
6,2<br />
7,2<br />
8,2<br />
9,2<br />
1,5<br />
2,5<br />
3,0<br />
3,5<br />
4,5<br />
5,4<br />
6,4<br />
7,4<br />
8,4<br />
9,3<br />
1,7<br />
2,7<br />
3,2<br />
3,7<br />
4,7<br />
5,6<br />
6,6<br />
7,6<br />
8,6<br />
9,5<br />
1,9<br />
2,9<br />
3,4<br />
3,9<br />
4,9<br />
5,8<br />
6,8<br />
7,8<br />
8,8<br />
9,7<br />
2,1 2,4 3,2 4,1 4,9 5,8 6,8<br />
3,1 3,4 3,9 4,4 4,9 5,8 6,8<br />
3,6 3,9 4,4 4,9 5,4 5,5 6,6<br />
4,1 4,4 4,8 5,2 5,6 5,8 6,9<br />
5,1 5,4 5,8 6,2 6,6 6,1 7,1<br />
6,0 6,3 6,7 7,0 7,4 6,9 7,8<br />
7,0 7,3 7,6 7,9 8,3 7,7 8,5<br />
8,0 8,3 8,6 8,9 9,2 8,5 9,2<br />
9,0 9,3 9,6 9,8 10,1 9,4 10,0<br />
9,9 10,2 10,4 10,6 10,8 10,3 10,8<br />
7,8 8,8 9,7 10,7<br />
7,8 8,8 9,7 10,7<br />
7,7 8,8 10,0 11,0<br />
8,0 9,1 10,1 11,1<br />
8,2 9,2 10,3 11,3<br />
8,8 9,7 10,7 11,7<br />
9,4 10,2 11,1 12,0<br />
9,9 10,6 11,4 12,3<br />
10,6 11,2 11,9 12,8<br />
11,3 11,8 12,3 13,2<br />
11,7 12,6<br />
11,7 12,6<br />
12,0 12,9<br />
12,1 13,0<br />
12,3 13,2<br />
12,7 13,6<br />
12,9 13,9<br />
13,2 14,1<br />
13,7 14,5<br />
14,1 14,9<br />
Push-To-Open<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Reveal adjustment + 3 mm / - 0,5 mm
<strong>3.1.</strong>36<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W20<br />
for corner cabinets, opening angle 95°<br />
Hinge versions<br />
Mounting examples<br />
Intermat 9936 W20<br />
Overlay door<br />
Cranking 7 mm<br />
Cranking - 9 mm<br />
Overlay<br />
Cup distance C<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Side<br />
Mounting options<br />
Overlay door<br />
Inset door<br />
Distance D<br />
20°<br />
Door<br />
• Concealed hinge for snap-on attachment<br />
• For corner cabinets with 20° face angle<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 2 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup T43<br />
Press-in<br />
Intermat 9936 W20<br />
Inset door<br />
Concealed hinges Intermat www.hettich.com<br />
Reveal<br />
Cup distance C<br />
Cup TB43<br />
Press-in<br />
Side<br />
Distance D<br />
W20<br />
20°<br />
95°<br />
9936 W20-T42 9936 W20-T43 9936 W20-TB43<br />
0 077 644 0 077 680 0 077 681<br />
9936 W20-T42 9936 W20-T43 9936 W20-TB43<br />
0 077 645 0 077 682 0 077 683<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
20°<br />
Door<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,9 5,7 6,6 7,5 8,4<br />
4 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,8 4,5 5,3 6,1 7,0 7,9<br />
4,5 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,7 4,3 5,1 5,9 6,8 7,7<br />
5 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,4 2,7 3,2 3,6 4,2 4,9 5,7 6,5 7,4<br />
6 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,3 2,6 3,1 3,5 4,0 4,6 5,3 6,1 6,9<br />
7 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,9 2,2 2,6 3,0 3,4 3,9 4,4 5,0 5,7 6,5<br />
8 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,8 2,1 2,5 2,9 3,3 3,7 4,2 4,8 5,4 6,1<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
ø35<br />
C<br />
5,5<br />
11,1<br />
52<br />
11 11,1<br />
T42 hole dimensions T43 hole dimensions TB43 hole dimensions<br />
Full overlay<br />
Overlay adjustment + 2 mm / - 2,5 mm<br />
X<br />
Cup distance<br />
range C<br />
Scale 1:1<br />
Cabinet side<br />
C = 3 ... 8 mm<br />
ø35<br />
C<br />
20°<br />
5,5<br />
ø10<br />
Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
Hole line<br />
45<br />
11<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W20<br />
for corner cabinets, opening angle 95°<br />
Cabinet side<br />
Cup distance<br />
range C<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
X<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,1<br />
C = 3 ... 8 mm<br />
Note:<br />
Drawings on this page are to full<br />
scale and show the hinges plus<br />
mounting plate distances.<br />
By drawing in the required cup<br />
distance C (3-8 mm), the door overlay<br />
can be measured directly from the<br />
applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
For inset-mounted doors, the cup<br />
distance and door thickness must be<br />
taken into account when determining<br />
the minimum reveal.<br />
Inset<br />
Reveal adjustment + 2,5 mm / - 2 mm<br />
Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
Hole line<br />
20°<br />
Concealed hinges Intermat <strong>3.1.</strong>37
<strong>3.1.</strong>38<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W20 FIX<br />
for corner cabinets, opening angle 95°<br />
Hinge versions<br />
Cranking 7 mm<br />
Cranking - 9 mm<br />
Mounting examples<br />
Intermat 9936 W20 FIX<br />
Overlay door<br />
Overlay<br />
Cup distance C<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Side<br />
Mounting options<br />
Overlay door<br />
Inset door<br />
Distance D<br />
20°<br />
Door<br />
• Concealed hinge for snap-on attachment<br />
• Toolless cup assembly<br />
• For corner cabinets with 20° face angle<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 2 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Article/Order no.<br />
Intermat 9936 W20 FIX<br />
Inset door<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9936 W20-TH FIX 9936 W20-TB FIX<br />
0 077 685 0 077 686<br />
9936 W20-TH FIX 9936 W20-TB FIX<br />
0 077 688 0 077 689<br />
Order no. PU<br />
0 013 300 1/50<br />
Concealed hinges Intermat www.hettich.com<br />
Reveal<br />
Cup distance C<br />
Side<br />
Distance D<br />
W20<br />
20°<br />
95°<br />
20°<br />
Door<br />
PU<br />
1/50<br />
PU<br />
1/50
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,9 5,7 6,6 7,5 8,4<br />
4 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,8 4,5 5,3 6,1 7,0 7,9<br />
4,5 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,7 4,3 5,1 5,9 6,8 7,7<br />
5 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,4 2,7 3,2 3,6 4,2 4,9 5,7 6,5 7,4<br />
6 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,3 2,6 3,1 3,5 4,0 4,6 5,3 6,1 6,9<br />
7 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,9 2,2 2,6 3,0 3,4 3,9 4,4 5,0 5,7 6,5<br />
8 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,8 2,1 2,5 2,9 3,3 3,7 4,2 4,8 5,4 6,1<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
TH FIX hole dimensions TB FIX hole dimensions<br />
X<br />
52<br />
Cup distance<br />
range C<br />
ø35<br />
6 11,6<br />
Cabinet side<br />
C<br />
5,5<br />
ø10<br />
Full overlay<br />
Overlay adjustment + 2 mm / - 2,5 mm<br />
Scale 1:1<br />
C = 3 ... 8 mm<br />
45<br />
6<br />
ø35<br />
Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
C<br />
Hole line<br />
20°<br />
9,5<br />
ø8<br />
11,6<br />
X<br />
Inset<br />
Reveal adjustment + 2,5 mm / - 2 mm<br />
Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
Cabinet side<br />
Cup distance<br />
range C<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W20 FIX<br />
for corner cabinets, opening angle 95°<br />
C = 3 ... 8 mm<br />
Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C (3-8 mm), the door overlay<br />
can be measured directly from the<br />
applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
For inset-mounted doors, the cup<br />
distance and door thickness must be<br />
taken into account when determining<br />
the minimum reveal.<br />
Hole line<br />
20°<br />
Concealed hinges Intermat <strong>3.1.</strong>39
<strong>3.1.</strong>40<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W30<br />
for corner cabinets, opening angle 95°<br />
Hinge versions<br />
Mounting examples<br />
Intermat 9936 W30<br />
Overlay door<br />
Cranking 7 mm<br />
Cranking - 10 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Overlay<br />
Cup distance C<br />
Mounting options<br />
Overlay door<br />
Inset door<br />
Side<br />
Distance D<br />
Door<br />
30°<br />
• Concealed hinge for snap-on attachment<br />
• For corner cabinets with 30° face angle<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 2 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup T43<br />
Press-in<br />
Intermat 9936 W30<br />
Inset door<br />
Concealed hinges Intermat www.hettich.com<br />
Reveal<br />
Cup distance C<br />
Cup TB43<br />
Press-in<br />
Side<br />
Distance D<br />
30°<br />
Door<br />
W30<br />
30°<br />
95°<br />
9936 W30-T42 9936 W30-T43 9936 W30-TB43<br />
0 077 690 0 077 691 0 077 692<br />
9936 W30-T42 9936 W30-T43 9936 W30-TB43<br />
0 073 928 0 073 929 0 073 930<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,9 5,7 6,6 7,5 8,4<br />
4 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,8 4,5 5,3 6,1 7,0 7,9<br />
4,5 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,7 4,3 5,1 5,9 6,8 7,7<br />
5 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,4 2,7 3,2 3,6 4,2 4,9 5,7 6,5 7,4<br />
6 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,3 2,6 3,1 3,5 4,0 4,6 5,3 6,1 6,9<br />
7 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,9 2,2 2,6 3,0 3,4 3,9 4,4 5,0 5,7 6,5<br />
8 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,8 2,1 2,5 2,9 3,3 3,7 4,2 4,8 5,4 6,1<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
Full overlay<br />
Overlay adjustment + 2 mm / - 2,5 mm<br />
... Inside cabinet wall for D 8 mm<br />
Cabinet side<br />
C = 3 ... 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
X Hole line X<br />
Cup distance<br />
range C<br />
ø35<br />
T42 hole dimensions T43 hole dimensions TB43 hole dimensions<br />
Scale 1:1<br />
C<br />
5,5<br />
11,1<br />
52<br />
ø35<br />
11 11,1<br />
C<br />
5,5<br />
ø10<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
45<br />
11<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W30<br />
for corner cabinets, opening angle 95°<br />
ø35<br />
Cabinet side<br />
C<br />
30° Cup distance<br />
C =<br />
range C<br />
3 ... 8 mm<br />
9,5<br />
ø8<br />
11,1<br />
Inset<br />
Reveal adjustment + 2,5 mm / - 2 mm<br />
C = 3 ... 8 mm<br />
Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C (3-8 mm), the door overlay<br />
can be measured directly from the<br />
applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
For inset-mounted doors, the cup<br />
distance and door thickness must be<br />
taken into account when determining<br />
the minimum reveal.<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for 1,5 mm<br />
... for 0 mm<br />
Hole line<br />
30°<br />
Concealed hinges Intermat <strong>3.1.</strong>41
<strong>3.1.</strong>42<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W30 FIX<br />
for corner cabinets, opening angle 95°<br />
Hinge versions<br />
Cranking 7 mm<br />
Cranking - 10 mm<br />
Mounting examples<br />
Intermat 9936 W30<br />
Overlay door<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Overlay<br />
Cup distance C<br />
Mounting options<br />
Overlay door<br />
Inset door<br />
Side<br />
Distance D<br />
Door<br />
30°<br />
• Concealed hinge for snap-on attachment<br />
• Toolless cup assembly<br />
• For corner cabinets with 30° face angle<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 2 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Article/Order no.<br />
Intermat 9936 W30<br />
Inset door<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9936 W30-TH FIX 9936 W30-TB FIX<br />
0 077 694 0 077 695<br />
9936 W30-TH FIX 9936 W30-TB FIX<br />
0 077 697 0 077 698<br />
Order no. PU<br />
0 013 300 1/50<br />
Concealed hinges Intermat www.hettich.com<br />
Reveal<br />
Cup distance C<br />
Side<br />
Distance D<br />
W30<br />
30°<br />
95°<br />
30°<br />
Door<br />
PU<br />
1/50<br />
PU<br />
1/50
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,9 5,7 6,6 7,5 8,4<br />
4 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,8 4,5 5,3 6,1 7,0 7,9<br />
4,5 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,7 4,3 5,1 5,9 6,8 7,7<br />
5 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,4 2,7 3,2 3,6 4,2 4,9 5,7 6,5 7,4<br />
6 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,3 2,6 3,1 3,5 4,0 4,6 5,3 6,1 6,9<br />
7 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,9 2,2 2,6 3,0 3,4 3,9 4,4 5,0 5,7 6,5<br />
8 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,8 2,1 2,5 2,9 3,3 3,7 4,2 4,8 5,4 6,1<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
Full overlay<br />
Overlay adjustment + 2 mm/- 2,5 mm<br />
... Inside cabinet wall for D 8 mm<br />
Cabinet side<br />
C = 3 ... 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
X Hole line X<br />
Cup distance<br />
range C<br />
ø35<br />
6 11,6<br />
Scale 1:1<br />
C<br />
5,5<br />
ø10<br />
45<br />
6<br />
ø35<br />
TH FIX hole dimensions TB FIX hole dimensions<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
C<br />
9,5<br />
ø8<br />
11,6<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W30 FIX<br />
for corner cabinets, opening angle 95°<br />
Inset<br />
Reveal adjustment + 2,5 mm/- 2 mm<br />
Cabinet side<br />
30° Cup distance<br />
C =<br />
range C<br />
3 ... 8 mm<br />
C = 3 ... 8 mm<br />
Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C (3-8 mm), the door overlay<br />
can be measured directly from the<br />
applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
For inset-mounted doors, the cup<br />
distance and door thickness must be<br />
taken into account when determining<br />
the minimum reveal.<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
Hole line<br />
30°<br />
Concealed hinges Intermat <strong>3.1.</strong>43
<strong>3.1.</strong>44<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W45<br />
for corner cabinets, opening angle 95°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 6 mm<br />
Cranking - 17 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge for snap-on attachment<br />
• For corner cabinets with 45° face angle<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 2 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup T43<br />
Press-in<br />
Cup TB43<br />
Press-in<br />
Concealed hinges Intermat www.hettich.com<br />
W45<br />
45°<br />
95°<br />
9936 W45-T42 9936 W45-T43 9936 W45-TB43<br />
0 048 096 0 048 097 0 048 098<br />
9936 W45-T42 9936 W45-T43 9936 W45-TB43<br />
0 077 699 0 077 700 0 077 701<br />
9936 W45-T42 9936 W45-T43 9936 W45-TB43<br />
0 073 932 0 073 933 0 073 934<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,9 5,7 6,6 7,5 8,4<br />
4 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,8 4,5 5,3 6,1 7,0 7,9<br />
4,5 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,7 4,3 5,1 5,9 6,8 7,7<br />
5 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,4 2,7 3,2 3,6 4,2 4,9 5,7 6,5 7,4<br />
6 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,3 2,6 3,1 3,5 4,0 4,6 5,3 6,1 6,9<br />
7 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,9 2,2 2,6 3,0 3,4 3,9 4,4 5,0 5,7 6,5<br />
8 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,8 2,1 2,5 2,9 3,3 3,7 4,2 4,8 5,4 6,1<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
ø35<br />
C<br />
5,5<br />
11,1<br />
52<br />
11 11,1<br />
T42 hole dimensions T43 hole dimensions TB43 hole dimensions<br />
Mounting examples<br />
Intermat 9936 W45<br />
Overlay door<br />
Cranking 0 mm<br />
Overlay<br />
Cup distance C<br />
Side<br />
Distance D<br />
Door<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
45°<br />
ø35<br />
C<br />
5,5<br />
ø10<br />
45<br />
11<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W45<br />
for corner cabinets, opening angle 95°<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,1<br />
Full overlay, cranking 0 mm<br />
Overlay adjustment + 2 mm / - 2,5 mm<br />
X<br />
Cabinet side<br />
C = 3 ... 8 mm<br />
Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C (3-8 mm), the door overlay<br />
can be measured directly from the<br />
applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
For inset-mounted doors, the cup<br />
distance and door thickness must be<br />
taken into account when determining<br />
the minimum reveal.<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
45°<br />
Hole line<br />
Scale 1:1<br />
Concealed hinges Intermat <strong>3.1.</strong>45
<strong>3.1.</strong>46<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W45<br />
for corner cabinets, opening angle 95°<br />
Full overlay, cranking 6 mm<br />
Overlay adjustment + 2 mm / - 2,5 mm<br />
Scale 1:1<br />
Cabinet side<br />
C = 3 ... 8 mm<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
X X<br />
Cup distance<br />
range C<br />
Mounting examples<br />
Intermat 9936 W45<br />
Overlay door<br />
Cranking 6 mm<br />
Overlay<br />
Cup distance C<br />
Side<br />
Distance D<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Door<br />
Hole line Hole line<br />
45°<br />
45°<br />
Inset, cranking - 17 mm<br />
Reveal adjustment + 2,5 mm / - 2 mm<br />
C = 3 ... 8 mm<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
Concealed hinges Intermat www.hettich.com<br />
Cabinet side<br />
Cup distance<br />
range C<br />
Intermat 9936 W45<br />
Inset door<br />
Cranking - 17 mm<br />
Reveal<br />
Cup distance C<br />
Side<br />
Distance D<br />
Door<br />
W45<br />
45°<br />
95°<br />
45°<br />
45°
Hinge versions<br />
W45<br />
45°<br />
95°<br />
Cranking 0 mm<br />
Cranking 6 mm<br />
Cranking - 17 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W45 FIX<br />
for corner cabinets, opening angle 95°<br />
• Concealed hinge for snap-on attachment<br />
• Toolless cup assembly<br />
• For corner cabinets with 45° face angle<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 2,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Article/Order no.<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9936 W45-TH FIX 9936 W45-TB FIX<br />
0 048 103 0 048 104<br />
9936 W45-TH FIX 9936 W45-TB FIX<br />
0 077 703 0 077 704<br />
9936 W45-TH FIX 9936 W45-TB FIX<br />
0 077 706 0 077 707<br />
Order no. PU<br />
0 013 300 1/50<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Concealed hinges Intermat <strong>3.1.</strong>47
<strong>3.1.</strong>48<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W45 FIX<br />
for corner cabinets, opening angle 95°<br />
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,9 5,7 6,6 7,5 8,4<br />
4 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,8 4,5 5,3 6,1 7,0 7,9<br />
4,5 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,7 4,3 5,1 5,9 6,8 7,7<br />
5 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,4 2,7 3,2 3,6 4,2 4,9 5,7 6,5 7,4<br />
6 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,3 2,6 3,1 3,5 4,0 4,6 5,3 6,1 6,9<br />
7 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,9 2,2 2,6 3,0 3,4 3,9 4,4 5,0 5,7 6,5<br />
8 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,8 2,1 2,5 2,9 3,3 3,7 4,2 4,8 5,4 6,1<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
ø35<br />
6 11,6<br />
C<br />
5,5<br />
ø10<br />
45<br />
6<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
TH FIX hole dimensions TB FIX hole dimensions<br />
Mounting example<br />
Intermat 9936 W45 FIX<br />
Overlay door<br />
Cranking 0 mm<br />
Overlay<br />
Cup distance C<br />
Side<br />
Distance D<br />
Door<br />
45°<br />
C<br />
9,5<br />
ø8<br />
11,6<br />
Full overlay, cranking 0 mm<br />
Overlay adjustment + 2 mm / - 2,5 mm<br />
X<br />
C = 3 ... 8 mm<br />
Concealed hinges Intermat www.hettich.com<br />
Cabinet side<br />
W45<br />
45°<br />
95°<br />
Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C (3-8 mm), the door overlay<br />
can be measured directly from the<br />
applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
For inset-mounted doors, the cup<br />
distance and door thickness must be<br />
taken into account when determining<br />
the minimum reveal.<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
45°<br />
Hole line<br />
Scale 1:1
Full overlay, cranking 6 mm<br />
Overlay adjustment + 2 mm / - 2,5 mm<br />
Cup distance<br />
range C<br />
Scale 1:1<br />
Cabinet side<br />
C = 3 ... 8 mm<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
X X<br />
Mounting examples<br />
Intermat 9936 W45 FIX<br />
Overlay door<br />
Cranking 6 mm<br />
Overlay<br />
Cup distance C<br />
Side<br />
Distance D<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Door<br />
45°<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W45 FIX<br />
for corner cabinets, opening angle 95°<br />
Inset, cranking - 17 mm<br />
Reveal adjustment + 2,5 mm / - 2 mm<br />
Cabinet side<br />
Hole line Hole line<br />
45°<br />
Cup distance<br />
range C<br />
Intermat 9936 W45 FIX<br />
Inset door<br />
Cranking - 17 mm<br />
C = 3 ... 8 mm<br />
Reveal<br />
Cup distance C<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
Side<br />
... for D 0 mm<br />
Distance D<br />
Door<br />
45°<br />
45°<br />
Concealed hinges Intermat <strong>3.1.</strong>49
<strong>3.1.</strong>50<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W90<br />
for face frame cabinets, opening angle 95°<br />
Hinge versions<br />
Cranking 5 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Inset door<br />
• Concealed hinge for snap-on attachment<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated depth adjustment + 2 mm/- 2,5 mm<br />
• Integrated eccentric reveal adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup T43<br />
Press-in<br />
Cup TB43<br />
Press-in<br />
9936 W90-T42 9936 W90-T43 9936 W90-TB43<br />
0 077 708 0 077 709 0 077 710<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Concealed hinges Intermat www.hettich.com<br />
W90<br />
90°<br />
95°<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,9 5,7 6,6 7,5 8,4<br />
4 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,8 4,5 5,3 6,1 7,0 7,9<br />
4,5 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,7 4,3 5,1 5,9 6,8 7,7<br />
5 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,4 2,7 3,2 3,6 4,2 4,9 5,7 6,5 7,4<br />
6 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,3 2,6 3,1 3,5 4,0 4,6 5,3 6,1 6,9<br />
7 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,9 2,2 2,6 3,0 3,4 3,9 4,4 5,0 5,7 6,5<br />
8 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,8 2,1 2,5 2,9 3,3 3,7 4,2 4,8 5,4 6,1<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
Push-To-Open<br />
52<br />
ø35<br />
C<br />
5,5<br />
11,1<br />
52<br />
11 11,1<br />
T42 hole dimensions T43 hole dimensions TB43 hole dimensions<br />
Mounting example Calculating distance<br />
Side<br />
Distance D<br />
Side<br />
Reveal<br />
Distance 5 mm<br />
min. 62 mm<br />
X<br />
28*<br />
A<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
C<br />
5,5<br />
ø10<br />
Door protrusion<br />
Cup distance C<br />
Door<br />
Door<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W90<br />
for face frame cabinets, opening angle 95°<br />
45<br />
11<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,1<br />
Distance = 5 mm - Door protrusion<br />
The hinges are correctly adjusted on leaving the factory.<br />
Door offset can be corrected as necessary.<br />
Turn screw (A) clockwise:<br />
Door offset can be adjusted by up to 4,5 mm (+ 2 mm/- 2,5 mm).<br />
The back of the door and front panel will be flush if a<br />
mounting plate with distance 5 mm is used.<br />
* The hole distance X, cup distance C and the reveal<br />
must always add up to 28!<br />
X + Cup distance C + Reveal = 28<br />
Calculating hole distance "X"<br />
Cup distance Reveal mm<br />
C mm 0 0,5 1,0 1,5 2,0 2,5 3,0<br />
3 25,0 24,5 24,0 23,5 23,0 22,5 22,0<br />
3,5 24,5 24,0 23,5 23,0 22,5 22,0 21,5<br />
4 24,0 23,5 23,0 22,5 22,0 21,5 21,0<br />
4,5 23,5 23,0 22,5 22,0 21,5 21,0 20,5<br />
5 23,0 22,5 22,0 21,5 21,0 20,5 20,0<br />
5,5 22,5 22,0 21,5 21,0 20,5 20,0 19,5<br />
6 22,0 21,5 21,0 20,5 20,0 19,5 19,0<br />
7 21,0 20,5 20,0 19,5 19,0 18,5 18,0<br />
8 20,0 19,5 19,0 18,5 18,0 17,5 17,0<br />
Concealed hinges Intermat <strong>3.1.</strong>51
<strong>3.1.</strong>52<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W90 FIX<br />
for face frame cabinets, opening angle 95°<br />
Hinge versions<br />
Cranking 5 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Inset door<br />
• Concealed hinge for snap-on attachment<br />
• Toolless cup assembly<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated depth adjustment + 2 mm/- 2,5 mm<br />
• Integrated eccentric reveal adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Article/Order no.<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9936 W90-TH FIX 9936 W90-TB FIX<br />
0 077 712 0 077 713<br />
Order no. PU<br />
0 013 300 1/50<br />
Concealed hinges Intermat www.hettich.com<br />
W90<br />
90°<br />
95°<br />
PU<br />
1/50
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,9 5,7 6,6 7,5 8,4<br />
4 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,8 4,5 5,3 6,1 7,0 7,9<br />
4,5 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,7 4,3 5,1 5,9 6,8 7,7<br />
5 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,4 2,7 3,2 3,6 4,2 4,9 5,7 6,5 7,4<br />
6 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,3 2,6 3,1 3,5 4,0 4,6 5,3 6,1 6,9<br />
7 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,9 2,2 2,6 3,0 3,4 3,9 4,4 5,0 5,7 6,5<br />
8 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,8 2,1 2,5 2,9 3,3 3,7 4,2 4,8 5,4 6,1<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
Push-To-Open<br />
52<br />
ø35<br />
6 11,6<br />
C<br />
5,5<br />
ø10<br />
45<br />
6<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
TH FIX hole dimensions TB FIX hole dimensions<br />
Mounting example Calculating distance<br />
Side<br />
Distance D<br />
Side<br />
Reveal<br />
Distance 5 mm<br />
min. 62 mm<br />
X<br />
28*<br />
A<br />
C<br />
9,5<br />
ø8<br />
Door protrusion<br />
Cup distance C<br />
Door<br />
Door<br />
11,6<br />
Fast-assembly concealed hinge<br />
Intermat 9936 W90 FIX<br />
for face frame cabinets, opening angle 95°<br />
Distance = 5 mm - Door protrusion<br />
The hinges are correctly adjusted on leaving the factory.<br />
Door offset can be corrected as necessary.<br />
Turn screw (A) clockwise:<br />
Door offset can be adjusted by up to 4,5 mm (+ 2 mm/- 2,5 mm).<br />
The back of the door and front panel will be flush if<br />
a mounting plate with distance 5 mm is used.<br />
* The hole distance X, cup distance C and the reveal<br />
must always add up to 28!<br />
X + Cup distance C + Reveal = 28<br />
Calculating hole distance "X"<br />
Cup distance Reveal mm<br />
C mm 0 0,5 1,0 1,5 2,0 2,5 3,0<br />
3 25,0 24,5 24,0 23,5 23,0 22,5 22,0<br />
3,5 24,5 24,0 23,5 23,0 22,5 22,0 21,5<br />
4 24,0 23,5 23,0 22,5 22,0 21,5 21,0<br />
4,5 23,5 23,0 22,5 22,0 21,5 21,0 20,5<br />
5 23,0 22,5 22,0 21,5 21,0 20,5 20,0<br />
5,5 22,5 22,0 21,5 21,0 20,5 20,0 19,5<br />
6 22,0 21,5 21,0 20,5 20,0 19,5 19,0<br />
7 21,0 20,5 20,0 19,5 19,0 18,5 18,0<br />
8 20,0 19,5 19,0 18,5 18,0 17,5 17,0<br />
Concealed hinges Intermat <strong>3.1.</strong>53
<strong>3.1.</strong>54<br />
Fast-assembly concealed hinge<br />
Intermat 9944 W-30<br />
for negative face angles, opening angle 125°<br />
Hinge versions<br />
Cranking 12 mm<br />
Mounting example<br />
Intermat 9944 W-30<br />
Overlay door<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Overlay<br />
Mounting options<br />
Overlay door<br />
Side<br />
Cup distance C<br />
Distance D<br />
60°<br />
Door<br />
• Concealed hinge for snap-on attachment<br />
• For corner cabinets with 30° face angle<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
-30°<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup T43<br />
Press-in<br />
Cup TB43<br />
Press-in<br />
9944 W-30-T42 9944 W-30-T43 9944 W-30-TB43<br />
0 073 936 0 073 937 0 073 938<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Concealed hinges Intermat www.hettich.com<br />
W-30<br />
-30°<br />
125°<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 1,3 1,6 1,9 2,3 2,8 3,3 3,9 4,6 5,3 6,1 6,9 7,7 8,6<br />
4 1,3 1,6 1,9 2,3 2,7 3,1 3,7 4,3 5,0 5,7 6,5 7,3 8,1<br />
4,5 1,2 1,5 1,8 2,2 2,6 3,0 3,6 4,2 4,9 5,6 6,4 7,2 7,9<br />
5 1,2 1,5 1,8 2,1 2,6 3,0 3,5 4,1 4,8 5,5 6,2 6,9 7,7<br />
5,5 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,6 5,3 6,0 6,7 7,4<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
ø35<br />
Full overlay<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Scale 1:1<br />
C<br />
5,5<br />
12,8<br />
X<br />
52<br />
Cup distance<br />
range C<br />
11 12,8<br />
T42 hole dimensions T43 hole dimensions TB43 hole dimensions<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
Cabinet side<br />
C<br />
5,5<br />
ø10<br />
Fast-assembly concealed hinge<br />
Intermat 9944 W-30<br />
for negative face angles, opening angle 125°<br />
45<br />
11<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
C = 3 ... 5,5 mm<br />
ø35<br />
... for D 0 mm<br />
C<br />
9,5<br />
ø8<br />
Hole line<br />
12,8<br />
-30°<br />
Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C (3-5,5 mm), the door<br />
overlay can be measured directly from<br />
the applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
Concealed hinges Intermat <strong>3.1.</strong>55
<strong>3.1.</strong>56<br />
Fast-assembly concealed hinge<br />
Intermat 9944 W-30 FIX<br />
for negative face angles, opening angle 125°<br />
Hinge versions<br />
Cranking 12 mm<br />
Mounting example<br />
Intermat 9944 W-30 FIX<br />
Overlay door<br />
Overlay<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Side<br />
Cup distance C<br />
Distance D<br />
60°<br />
Door<br />
-30°<br />
• Concealed hinge for snap-on attachment<br />
• Toolless cup assembly<br />
• For corner cabinets with 30° face angle<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Article/Order no.<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9944 W-30-TH FIX 9944 W-30-TB FIX<br />
0 077 718 0 077 719<br />
Order no. PU<br />
0 013 300 1/50<br />
Concealed hinges Intermat www.hettich.com<br />
W-30<br />
-30°<br />
125°<br />
PU<br />
1/50
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 1,3 1,6 1,9 2,3 2,8 3,3 3,9 4,6 5,3 6,1 6,9 7,7 8,6<br />
4 1,3 1,6 1,9 2,3 2,7 3,1 3,7 4,3 5,0 5,7 6,5 7,3 8,1<br />
4,5 1,2 1,5 1,8 2,2 2,6 3,0 3,6 4,2 4,9 5,6 6,4 7,2 7,9<br />
5 1,2 1,5 1,8 2,1 2,6 3,0 3,5 4,1 4,8 5,5 6,2 6,9 7,7<br />
5,5 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,6 5,3 6,0 6,7 7,4<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
ø35<br />
6 12,8<br />
Full overlay<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Scale 1:1<br />
C<br />
5,5<br />
ø10<br />
X<br />
45<br />
6<br />
Cup distance<br />
range C<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
TH FIX hole dimensions TB FIX hole dimensions<br />
Cabinet side<br />
C<br />
9,5<br />
ø8<br />
12,8<br />
Fast-assembly concealed hinge<br />
Intermat 9944 W-30 FIX<br />
for negative face angles, opening angle 125°<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
C = 3 ... 5,5 mm<br />
... for D 0 mm<br />
Hole line<br />
-30°<br />
Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C (3-5,5 mm), the door<br />
overlay can be measured directly from<br />
the applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
Concealed hinges Intermat <strong>3.1.</strong>57
<strong>3.1.</strong>58<br />
Fast-assembly concealed hinge<br />
Intermat 9944 W-45<br />
for negative face angles, opening angle 125°<br />
Hinge versions<br />
Cranking 10 mm<br />
Mounting example<br />
Intermat 9944 W-45<br />
Overlay door<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Overlay<br />
Side<br />
Mounting options<br />
Overlay door<br />
Distance D<br />
45°<br />
Door<br />
Cup<br />
distance C<br />
• Concealed hinge for snap-on attachment<br />
• For corner cabinets with 45° face angle<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
-45°<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup T43<br />
Press-in<br />
Cup TB43<br />
Press-in<br />
W-45<br />
-45°<br />
125°<br />
9944 W-45-T42 9944 W-45-T43 9944 W-45-TB43<br />
0 077 643 0 077 720 0 077 721<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Concealed hinges Intermat www.hettich.com<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 1,3 1,6 1,9 2,3 2,8 3,3 3,9 4,6 5,3 6,1 6,9 7,7 8,6<br />
4 1,3 1,6 1,9 2,3 2,7 3,1 3,7 4,3 5,0 5,7 6,5 7,3 8,1<br />
4,5 1,2 1,5 1,8 2,2 2,6 3,0 3,6 4,2 4,9 5,6 6,4 7,2 7,9<br />
5 1,2 1,5 1,8 2,1 2,6 3,0 3,5 4,1 4,8 5,5 6,2 6,9 7,7<br />
5,5 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,6 5,3 6,0 6,7 7,4<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
ø35<br />
Full overlay<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
C<br />
5,5<br />
12,8<br />
52<br />
11 12,8<br />
T42 hole dimensions T43 hole dimensions TB43 hole dimensions<br />
Scale 1:1<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
X<br />
Cup distance<br />
range C<br />
C<br />
5,5<br />
ø10<br />
Cabinet side<br />
Fast-assembly concealed hinge<br />
Intermat 9944 W-45<br />
for negative face angles, opening angle 125°<br />
45<br />
11<br />
ø35<br />
C<br />
C = 3 ... 5,5 mm<br />
9,5<br />
ø8<br />
12,8<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
Hole line<br />
-45°<br />
Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C (3-5,5 mm), the door<br />
overlay can be measured directly from<br />
the applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
Concealed hinges Intermat <strong>3.1.</strong>59
<strong>3.1.</strong>60<br />
Fast-assembly concealed hinge<br />
Intermat 9944 W-45 FIX<br />
for negative face angles, opening angle 125°<br />
Hinge versions<br />
Cranking 10 mm<br />
Mounting example<br />
Intermat 9944 W-45 FIX<br />
Overlay door<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Overlay<br />
Side<br />
Mounting options<br />
Overlay door<br />
Distance D<br />
45°<br />
Door<br />
Cup<br />
distance C<br />
• Concealed hinge for snap-on attachment<br />
• Toolless cup assembly<br />
• For corner cabinets with 45° face angle<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Article/Order no.<br />
-45°<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9944 W-45-TH FIX 9944 W-45-TB FIX<br />
0 077 723 0 077 724<br />
W-45<br />
-45°<br />
125°<br />
Concealed hinges Intermat www.hettich.com<br />
PU<br />
1/50
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 1,3 1,6 1,9 2,3 2,8 3,3 3,9 4,6 5,3 6,1 6,9 7,7 8,6<br />
4 1,3 1,6 1,9 2,3 2,7 3,1 3,7 4,3 5,0 5,7 6,5 7,3 8,1<br />
4,5 1,2 1,5 1,8 2,2 2,6 3,0 3,6 4,2 4,9 5,6 6,4 7,2 7,9<br />
5 1,2 1,5 1,8 2,1 2,6 3,0 3,5 4,1 4,8 5,5 6,2 6,9 7,7<br />
5,5 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,6 5,3 6,0 6,7 7,4<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
ø35<br />
6 12,8<br />
Full overlay<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
C<br />
5,5<br />
ø10<br />
45<br />
6<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
ø35<br />
TH FIX hole dimensions TB FIX hole dimensions<br />
Scale 1:1<br />
Cup distance<br />
range C<br />
X<br />
C<br />
9,5<br />
ø8<br />
Cabinet side<br />
12,8<br />
Fast-assembly concealed hinge<br />
Intermat 9944 W-45 FIX<br />
for negative face angles, opening angle 125°<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
C = 3 ... 5,5 mm<br />
Hole line<br />
-45°<br />
Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C (3-5,5 mm), the door<br />
overlay can be measured directly from<br />
the applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
Concealed hinges Intermat <strong>3.1.</strong>61
<strong>3.1.</strong>62<br />
Fast-assembly concealed hinge<br />
Intermat 9924<br />
Opening angle 95°<br />
Hinge versions<br />
Cranking 1 mm<br />
Cranking 9,5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge for snap-on attachment<br />
• For small doors and narrow frame doors<br />
• Door thickness from 15 mm<br />
• Cup diameter 26 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup T42/26<br />
Screw on<br />
Article/Order no.<br />
9924-T42/26<br />
0 072 959<br />
9924-T42/26<br />
0 072 965<br />
9924-T42/26<br />
0 072 966<br />
Order no. PU<br />
0 013 300 1/50<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Concealed hinges Intermat www.hettich.com<br />
ø26<br />
95°<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,5 0,9 1,3 2,1 2,9 3,7 4,6 5,6 6,5 7,4 8,4<br />
4 0,5 0,8 1,2 1,8 2,5 3,3 4,2 5,0 5,9 6,8 7,7<br />
4,5 0,5 0,8 1,2 1,8 2,4 3,1 4,0 4,8 5,6 6,5 7,4<br />
5 0,5 0,8 1,2 1,7 2,2 2,9 3,7 4,5 5,3 6,1 7,0<br />
5,5 0,5 0,8 1,1 1,5 2,0 2,7 3,5 4,2 5,0 5,8 6,6<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
Push-To-Open<br />
38<br />
ø26<br />
T42/26 hole dimensions<br />
Door<br />
Side<br />
Overlay<br />
Reveal<br />
Distance D<br />
Overlay<br />
2 x Reveal<br />
Side<br />
Reveal<br />
C<br />
8<br />
12<br />
Distance D<br />
Cup distance C<br />
Side<br />
Distance D<br />
Distance D<br />
Cup distance C<br />
Door<br />
Door<br />
Door<br />
Door thickness<br />
Cup distance C<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Fast-assembly concealed hinge<br />
Intermat 9924<br />
Opening angle 95°<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 7,5<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5 0,0<br />
5,5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,5<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Distance D mm<br />
3 0,3 1,1 1,9 2,7 3,6 4,6 5,5 6,4 7,4<br />
4 0,5 0,8 1,2 1,8 2,5 3,3 4,2 5,0 5,9 6,8 7,7<br />
4,5 1,0 1,3 1,7 2,3 2,9 3,7 4,5 5,2 6,1 7,0 7,9<br />
5 1,5 1,8 2,2 2,7 3,2 3,9 4,7 5,5 6,3 7,1 8,0<br />
5,5 2,0 2,3 2,6 3,0 3,5 4,2 5,0 5,7 6,5 7,3 8,1<br />
Side<br />
T<br />
Door<br />
H<br />
95°<br />
Cranking H T<br />
mm mm mm<br />
1,0 19,0 4,2<br />
9,5 23,0 12,7<br />
16,0 29,5 19,2<br />
Cup distance Overlay mm<br />
C mm 8 9 10 11 12 13 14 15 16 16,5<br />
Distance D mm<br />
3 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5 0,0<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
Concealed hinges Intermat <strong>3.1.</strong>63<br />
65
<strong>3.1.</strong>64<br />
Fast-assembly glass-door hinge<br />
Intermat 9904<br />
Opening angle 95°<br />
Hinge versions<br />
Cranking 1 mm<br />
Cranking 9,5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge for snap-on attachment<br />
• For glass panel thicknesses of 4 - 6,5 mm<br />
• Cup diameter 26 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: black plastic<br />
• Hinge arm: nickel-plated die-cast zinc<br />
• Please order hinge-cup fixing screws separately for glass<br />
panel thicknesses of 5,5 - 6,5 mm, see page below<br />
• For decorative caps, see page <strong>3.1.</strong>65<br />
Cup versions<br />
Cup T1<br />
Screw on<br />
Article/Order no.<br />
9904-T1<br />
0 072 960<br />
9904-T1<br />
0 072 967<br />
9904-T1<br />
0 072 968<br />
Order no. PU<br />
0 013 300 1/50<br />
Hinge-cup fixing screw for glass<br />
panel thicknesses of 5,5 - 6,5 mm<br />
• Nickel-plated steel<br />
Concealed hinges Intermat www.hettich.com<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Glass<br />
ø26<br />
95°<br />
ø 26<br />
T1 hole dimensions<br />
Bestell-Nr. VE<br />
9 082 429 200<br />
5,5 +0,5<br />
Glass<br />
4 - 6,5 mm Panel thickness
Decorative cap A Decorative cap B<br />
Finishes Order no. PU<br />
Decorative cap A Decorative cap B<br />
high-gloss gold 0 040 340 0 040 494 1/50<br />
high-gloss chrome 0 040 341 0 040 495 1/50<br />
black 0 070 051 0 070 052 1/50<br />
matt nickel-plated 0070712 0070713 1/50<br />
Side<br />
Overlay<br />
Reveal<br />
Distance D<br />
Overlay<br />
Glass door<br />
2 x Reveal<br />
Side<br />
Distance D<br />
Cup distance C<br />
Side<br />
Distance D<br />
Distance D<br />
Glass door<br />
Glass door<br />
Cup distance C<br />
Reveal Glass door<br />
Cup distance C<br />
! Cup<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 7,5 8<br />
Fast-assembly glass-door hinge<br />
Intermat 9904<br />
Opening angle 95°<br />
Distance D mm<br />
5,5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,5 0,0<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Reveal = 1,5 mm<br />
Cup distance = 5,5 mm<br />
Distance = 3,0 mm<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 5,5 mm<br />
cup distance<br />
distance Overlay mm<br />
C mm 9 10 11 12 13 14 15 16 16,5<br />
Distance D mm<br />
5,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5 0,0<br />
Door<br />
Side<br />
Concealed hinges Intermat <strong>3.1.</strong>65<br />
H<br />
T<br />
95°<br />
Cranking H T<br />
mm mm mm<br />
1,0 19,0 4,0<br />
9,5 23,0 12,5<br />
16,0 29,5 19,0<br />
65
<strong>3.1.</strong>66<br />
Fast-assembly concealed hinge<br />
Intermat 9924 W30<br />
for corner cabinets, opening angle 95°<br />
Hinge versions<br />
Mounting examples<br />
Intermat 9924 W30<br />
Overlay door<br />
Cranking 6 mm<br />
Cranking -5 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Inset door<br />
Overlay<br />
Cup distance C<br />
Side<br />
Distance D<br />
Door<br />
30°<br />
• Concealed hinge for snap-on attachment<br />
• For corner cabinets with 30° face angle<br />
• For small doors and narrow frame doors<br />
• Door thickness from 15 mm<br />
• Cup diameter 26 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup T42/26<br />
Screw on<br />
Article/Order no.<br />
9924 W30-T42/26<br />
0 079 306<br />
9924 W30-T42/26<br />
0 079 307<br />
Order no. PU<br />
0 013 300 1/50<br />
Intermat 9924 W30<br />
Inset door<br />
Concealed hinges Intermat www.hettich.com<br />
Reveal<br />
Cup distance C<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Side<br />
ø26<br />
Distance D<br />
W30<br />
30°<br />
95°<br />
30°<br />
Door<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,5 0,9 1,3 2,1 2,9 3,7 4,6 5,6 6,5 7,4 8,4<br />
4 0,5 0,8 1,2 1,8 2,5 3,3 4,2 5,0 5,9 6,8 7,7<br />
4,5 0,5 0,8 1,2 1,8 2,4 3,1 4,0 4,8 5,6 6,5 7,4<br />
5 0,5 0,8 1,2 1,7 2,2 2,9 3,7 4,5 5,3 6,1 7,0<br />
5,5 0,5 0,8 1,1 1,5 2,0 2,7 3,5 4,2 5,0 5,8 6,6<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
38<br />
ø26<br />
T42/26 hole dimensions<br />
C<br />
Full overlay<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cabinet side<br />
Scale 1:1<br />
8<br />
12<br />
C = 3 ... 5,5 mm<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
X Hole line X<br />
Cup distance<br />
range C<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
30°<br />
Fast-assembly concealed hinge<br />
Intermat 9924 W30<br />
for corner cabinets, opening angle 95°<br />
Inset<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
Cabinet side<br />
Cup distance<br />
range C<br />
C = 3 ... 5,5 mm<br />
Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C (3-5,5 mm), the door<br />
overlay can be measured directly from<br />
the applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
For inset-mounted doors, the cup<br />
distance and door thickness must be<br />
taken into account when determining<br />
the minimum reveal.<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
Hole line<br />
30°<br />
Concealed hinges Intermat <strong>3.1.</strong>67
<strong>3.1.</strong>68<br />
Fast-assembly glass-door hinge<br />
Intermat 9904 W30<br />
for corner cabinets, opening angle 95°<br />
Hinge versions<br />
Mounting examples<br />
Intermat 9904 W30<br />
Overlay door<br />
Cranking 6 mm<br />
Cranking -5 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Inset door<br />
Cup distance C<br />
Overlay<br />
Side<br />
Distance D<br />
30°<br />
Door<br />
• Concealed hinge for snap-on attachment<br />
• For corner cabinets with 30° face angle<br />
• For glass panel thicknesses of 4 - 6,5 mm<br />
• Cup diameter 26 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: black plastic<br />
• Hinge arm: nickel-plated die-cast zinc<br />
• Please order hinge-cup fixing screws separately for glass<br />
panel thicknesses of 5,5 - 6,5 mm, see page below<br />
• For decorative caps, see page <strong>3.1.</strong>69<br />
Cup versions<br />
Cup T1<br />
Screw on<br />
Article/Order no.<br />
9904 W30-T1<br />
0 079 314<br />
9904 W30-T1<br />
0 079 315<br />
Order no. PU<br />
0 013 300 1/50<br />
Intermat 9904 W30<br />
Inset door<br />
Concealed hinges Intermat www.hettich.com<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Reveal<br />
Cup distance C<br />
Hinge-cup fixing screw for glass<br />
panel thicknesses of 5,5 - 6,5 mm<br />
• Nickel-plated steel<br />
Side<br />
ø26<br />
W30<br />
Glass<br />
30°<br />
95°<br />
ø 26<br />
T1 hole dimensions<br />
Distance D<br />
5,5 +0,5<br />
Glass<br />
4 - 6,5 mm Panel thickness<br />
Door<br />
30°<br />
Order no. PU<br />
9 082 429 200
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Fast-assembly glass-door hinge<br />
Intermat 9904 W30<br />
for corner cabinets, opening angle 95°<br />
Decorative cap A Decorative cap B Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C = 5,5 mm the door<br />
overlay can be measured directly from<br />
the applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
Finishes Order no. PU<br />
Decorative cap A Decorative cap B<br />
high-gloss gold 0 040 340 0 040 494 1/50<br />
high-gloss chrome 0 040 341 0 040 495 1/50<br />
black 0 070 051 0 070 052 1/50<br />
matt nickel-plated 0070712 0070713 1/50<br />
Full overlay<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cabinet side<br />
C = 5,5<br />
Scale 1:1<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
X Hole line X<br />
Cup distance<br />
range C<br />
30°<br />
Inset<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
Cabinet side<br />
Cup distance<br />
range C<br />
C = 5,5<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
Hole line<br />
30°<br />
Concealed hinges Intermat <strong>3.1.</strong>69
<strong>3.1.</strong>70<br />
Fast-assembly concealed hinge<br />
Intermat 9924 W45<br />
for corner cabinets, opening angle 95°<br />
Hinge versions<br />
Mounting examples<br />
Intermat 9924 W45<br />
Overlay door<br />
Cranking 6 mm<br />
Cranking -5 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Cup distance C<br />
Mounting options<br />
Overlay door<br />
Inset door<br />
Overlay<br />
Side<br />
Distance D<br />
Door<br />
45°<br />
• Concealed hinge for snap-on attachment<br />
• For corner cabinets with 45° face angle<br />
• For small doors and narrow frame doors<br />
• Door thickness from 15 mm<br />
• Cup diameter 26 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup T42/26<br />
Screw on<br />
Article/Order no.<br />
9924 W45-T42/26<br />
0 079 310<br />
9924 W45-T42/26<br />
0 079 311<br />
Order no. PU<br />
0 013 300 1/50<br />
Intermat 9924 W45<br />
Inset door<br />
Concealed hinges Intermat www.hettich.com<br />
Reveal<br />
Cup distance C<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Side<br />
ø26<br />
Distance D<br />
Door<br />
W45<br />
45°<br />
95°<br />
45°<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,5 0,9 1,3 2,1 2,9 3,7 4,6 5,6 6,5 7,4 8,4<br />
4 0,5 0,8 1,2 1,8 2,5 3,3 4,2 5,0 5,9 6,8 7,7<br />
4,5 0,5 0,8 1,2 1,8 2,4 3,1 4,0 4,8 5,6 6,5 7,4<br />
5 0,5 0,8 1,2 1,7 2,2 2,9 3,7 4,5 5,3 6,1 7,0<br />
5,5 0,5 0,8 1,1 1,5 2,0 2,7 3,5 4,2 5,0 5,8 6,6<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
38<br />
ø26<br />
T42/26 hole dimensions<br />
C<br />
Full overlay<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Scale 1:1<br />
C = 3..5,5 mm<br />
8<br />
12<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
X Hole line X<br />
Cup distance<br />
range C<br />
Cabinet side<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
45°<br />
Fast-assembly concealed hinge<br />
Intermat 9924 W45<br />
for corner cabinets, opening angle 95°<br />
Inset<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
Cabinet side<br />
Cup distance<br />
range C<br />
C = 3 .. 5,5 mm<br />
Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C (3-5,5 mm), the door<br />
overlay can be measured directly from<br />
the applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
For inset-mounted doors, the cup<br />
distance and door thickness must be<br />
taken into account when determining<br />
the minimum reveal.<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
45°<br />
Hole line<br />
Concealed hinges Intermat <strong>3.1.</strong>71
<strong>3.1.</strong>72<br />
Fast-assembly glass-door hinge<br />
Intermat 9904 W45<br />
for corner cabinets, opening angle 95°<br />
Hinge versions<br />
Mounting examples<br />
Intermat 9904 W45<br />
Overlay door<br />
Cranking 6 mm<br />
Cranking -5 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Inset door<br />
Overlay<br />
Cup distance C<br />
Side<br />
Distance D<br />
Door<br />
45°<br />
• Concealed hinge for snap-on attachment<br />
• For corner cabinets with 45° face angle<br />
• For glass panel thicknesses of 4 - 6,5 mm<br />
• Cup diameter 26 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: black plastic<br />
• Hinge arm: nickel-plated die-cast zinc<br />
• Please order hinge-cup fixing screws separately for glass<br />
panel thicknesses of 5,5 - 6,5 mm, see page below<br />
• For decorative caps, see page <strong>3.1.</strong>73<br />
Cup versions<br />
Cup T1<br />
Screw on<br />
Article/Order no.<br />
9904 W45-T1<br />
0 079 316<br />
9904 W45-T1<br />
0 079 317<br />
Order no. PU<br />
0 013 300 1/50<br />
Intermat 9904 W45<br />
Inset door<br />
T1 hole dimensions<br />
Concealed hinges Intermat www.hettich.com<br />
Reveal<br />
Cup distance C<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Hinge-cup fixing screw for glass<br />
panel thicknesses of 5,5 - 6,5 mm<br />
• Nickel-plated steel<br />
Side<br />
ø26<br />
Distance D<br />
Door<br />
W45<br />
Glass<br />
45°<br />
95°<br />
ø 26<br />
5,5 +0,5<br />
Glass<br />
4 - 6,5 mm Panel thickness<br />
45°<br />
Order no. PU<br />
9 082 429 200
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Fast-assembly glass-door hinge<br />
Intermat 9904 W45<br />
for corner cabinets, opening angle 95°<br />
Decorative cap A Decorative cap B Note:<br />
Drawings on this page are to full scale<br />
and show the hinges plus mounting<br />
plate distances.<br />
By drawing in the required cup<br />
distance C = 5,5 mm the door<br />
overlay can be measured directly from<br />
the applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
Finishes Order no. PU<br />
Decorative cap A Decorative cap B<br />
high-gloss gold 0 040 340 0 040 494 1/50<br />
high-gloss chrome 0 040 341 0 040 495 1/50<br />
black 0 070 051 0 070 052 1/50<br />
matt nickel-plated 0070712 0070713 1/50<br />
Full overlay<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
Cabinet side<br />
X Hole line X<br />
Cup distance<br />
range C Cup distance<br />
range C<br />
C = 5,5<br />
Scale 1:1<br />
45°<br />
Inset<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
Cabinet side<br />
C = 5,5<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
45°<br />
Hole line<br />
Concealed hinges Intermat <strong>3.1.</strong>73
<strong>3.1.</strong>74<br />
Fast-assembly hinge<br />
Intermat 9936 Alu Silent System<br />
for aluminium framed doors, opening angle 95°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
Cup versions<br />
Cup Alu T2<br />
Screw on<br />
Mounting options Article/Order no.<br />
• Concealed hinge for snap-on attachment<br />
• For 19 mm aluminium frame profile, see pages <strong>3.1.</strong>76 - <strong>3.1.</strong>77<br />
• Ideal for combining with Silent System clip-on door dampers, see page <strong>3.1.</strong>108<br />
• With self-closing feature<br />
• Integrated overlay adjustment ± 2,5 mm<br />
• Integrated cam depth adjustment ± 2 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated die-cast zinc<br />
• Hinge arm: nickel-plated steel<br />
• Includes 2 hinge cup fixing screws<br />
9936-Alu Silent System T2<br />
0 060 582<br />
9936-Alu Silent System T2<br />
0 060 683<br />
9936-Alu Silent System T2<br />
0 060 684<br />
Order no. PU<br />
0 013 300 1/50<br />
Concealed hinges Intermat www.hettich.com<br />
PU<br />
1/10<br />
PU<br />
1/10<br />
PU<br />
1/10<br />
Door<br />
Reveal<br />
Overlay<br />
Reveal<br />
Distance D<br />
Overlay<br />
2 x Reveal<br />
Side<br />
95°<br />
Aluframe<br />
Distance D<br />
Side<br />
Side<br />
Distance D<br />
Distance D<br />
Door<br />
Door<br />
Door
Assembly:<br />
fixing screws<br />
16,5<br />
6<br />
90°<br />
Silent System, see page <strong>3.1.</strong>108<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
14,5 ø7<br />
28<br />
10<br />
42<br />
+0,2<br />
1<br />
Fast-assembly hinge<br />
Intermat 9936 Alu Silent System<br />
for aluminium framed doors, opening angle 95°<br />
max. 2,5<br />
The minimum reveal for the recommended profile is 1 mm<br />
(2 mm for half overlay version)<br />
Overlay mm<br />
5 6 7 8 9 10 11 12 13 14 15<br />
Distance 10,5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
D mm<br />
Overlay adjustment ± 2,5 mm<br />
Overlay mm<br />
0 1 2 3 4 5<br />
Distance 6 5 4 3 2 1<br />
D mm<br />
Overlay adjustment ± 2,5 mm<br />
Reveal mm<br />
1,5 2 3 4 5<br />
Distance 1,5 2 3 4 5<br />
D mm<br />
Reveal adjustment ± 2,5 mm<br />
Milling diagram:<br />
7<br />
19<br />
15,5<br />
20<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance Side<br />
Door<br />
H<br />
T<br />
95°<br />
Cranking H T<br />
mm mm mm<br />
0,0 19,5 10,0<br />
9,5 29,0 19,5<br />
16,0 35,5 26,0<br />
Assembly<br />
Silent System clip-on door buffer<br />
Disassembly<br />
Door heights up to<br />
2400<br />
2000<br />
1600<br />
900<br />
Max. door width 600 mm<br />
1<br />
1<br />
2<br />
2<br />
66<br />
Recommended number of<br />
buffers per door<br />
Guide values for 19 mm<br />
chipboard panels with<br />
a density of 750 kg/m3 Concealed hinges Intermat <strong>3.1.</strong>75
<strong>3.1.</strong>76<br />
Sets aluminium frame doors<br />
width 19 mm<br />
� Vertical profile set, contains:<br />
1 Aluminium vertical bar profile<br />
with 2, 3 or 4 milled hinge recesses,<br />
anodised silver<br />
1 Aluminium vertical profile<br />
without milled hinge recess,<br />
anodised silver<br />
2 x sealing strip<br />
Door heights Hinge milled recess (mm) Profile F Order no. PU<br />
mm A B C D E mm<br />
260 - 340 122 96 – – 122 340 0 079 667 1 set<br />
356 - 436 122 192 – – 122 436 0 079 668 1 set<br />
452 - 532 122 288 – – 122 532 0 079 669 1 set<br />
548 - 628 122 384 – – 122 628 0 079 670 1 set<br />
644 - 724 122 480 – – 122 724 0 079 671 1 set<br />
740 - 820 122 576 – – 122 820 0 079 672 1 set<br />
804 - 916 138 640 – – 138 916 0 079 673 1 set<br />
932 - 1044 138 768 – – 138 1044 0 079 674 1 set<br />
1060 - 1172 138 448 448 – 138 1172 0 079 675 1 set<br />
1188 - 1300 138 512 512 – 138 1300 0 079 676 1 set<br />
1316 - 1428 138 576 576 – 138 1428 0 079 677 1 set<br />
1444 - 1556 138 640 640 – 138 1556 0 079 678 1 set<br />
1572 - 1716 154 704 704 – 154 1716 0 079 679 1 set<br />
1732 - 1876 154 544 480 544 154 1876 0 079 680 1 set<br />
1892 - 2068 170 576 576 576 170 2068 0 079 681 1 set<br />
Note: On doors over 1m in height, the glazing must be stuck to the<br />
aluminium profile using commercially available adhesive.<br />
Order no. PU<br />
0 079 686 1 set<br />
Concealed hinges Intermat www.hettich.com<br />
95°<br />
Aluframe<br />
• Aluminium framed doors provide a visually pleasing material combination<br />
to enhance any furniture front.<br />
• This profile can be customised to size by the customer.<br />
• The aluminium door frames are designed for use with Intermat 9936 Alu<br />
Silent System hinges and are provided with the necessary drill holes / milled<br />
recesses.<br />
• Door frames can be adjusted to individual cabinet heights.<br />
• Vertical and cross profiles can be easily shortened.<br />
A complete aluminium frame consists of:<br />
� 1 Vertical profile set<br />
+ � 1 Cross profile set<br />
+ � 1 Angle set<br />
� Cross profile set, contains:<br />
2 Aluminium cross profiles,<br />
anodised silver<br />
2 x sealing strip<br />
Profile G<br />
mm<br />
Order no. PU<br />
294 0 079 682 1 set<br />
394 0 079 683 1 set<br />
494 0 079 684 1 set<br />
594 0 079 685 1 set<br />
� Angle set, contains:<br />
4 Fixing angles<br />
8 Fixing screws
F<br />
65<br />
43,6<br />
Assembly<br />
43,6<br />
65<br />
�<br />
�<br />
6<br />
ø10,4<br />
45°<br />
ø6,7<br />
9,5<br />
4<br />
19,5<br />
�<br />
G<br />
19<br />
�<br />
A<br />
min. 85<br />
B<br />
C<br />
D<br />
E<br />
min. 85<br />
37<br />
Door overlay<br />
ø7<br />
32<br />
45°<br />
�<br />
Sets aluminium frame doors<br />
width 19 mm<br />
The top and bottom of the vertical bar profiles can<br />
be shortened by a maximum of 40 mm.<br />
The cross profiles are designed for an overall reveal<br />
of 3 mm. They can be shortened for other dimensions.<br />
The doors can be fixed in the 32 mm hole line in the<br />
cabinet. If necessary, the door panel may be shortened<br />
by 32 mm top and bottom.<br />
The aluminium framed doors must be mounted<br />
with the following hinge:<br />
Intermat 9936 Alu Silent System<br />
see pages <strong>3.1.</strong>74 - <strong>3.1.</strong>75<br />
�<br />
37<br />
max. 2,5<br />
Side<br />
16<br />
13<br />
Distance 3 mm<br />
Door<br />
For 19 mm cabinet side,<br />
use distance 0.<br />
�<br />
Concealed hinges Intermat <strong>3.1.</strong>77
<strong>3.1.</strong>78<br />
Fast-assembly hinge<br />
Intermat 9944 Alu<br />
for aluminium framed doors, opening angle 125°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
• Concealed hinge for snap-on attachment<br />
• For aluminium frame profile, see page <strong>3.1.</strong>79<br />
• With self-closing feature<br />
• Integrated overlay adjustment ± 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated die-cast zinc<br />
• Hinge arm: nickel-plated steel<br />
• Includes 2 hinge cup fixing screws<br />
Cup versions<br />
Cup Alu T1<br />
Screw on<br />
Article/Order no.<br />
9944-Alu T1<br />
0 020 169<br />
9944-Alu T1<br />
0 020 170<br />
Order no. PU<br />
0 013 300 1/50<br />
Concealed hinges Intermat www.hettich.com<br />
125°<br />
Aluframe<br />
PU<br />
1/10<br />
PU<br />
1/10
Milling diagram<br />
44 +0,2<br />
22 +0,2<br />
31 ±0,1<br />
The minimum reveal for the recommended profile is 1 mm<br />
(2 mm for half overlay version)<br />
Door<br />
Side<br />
Overlay<br />
Reveal<br />
Assembly<br />
Distance D<br />
Overlay<br />
2 x Reveal<br />
Distance D<br />
Side<br />
Distance D<br />
Door<br />
Door<br />
R4<br />
ø 7<br />
10<br />
Fixing screws<br />
DIN 7982<br />
Silent System, see pages <strong>3.1.</strong>114<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
R4<br />
Fast-assembly hinge<br />
Intermat 9944 Alu<br />
for aluminium framed doors, opening angle 125°<br />
1,4 +0,2<br />
20<br />
6 ±0,1<br />
16 +0,2<br />
19<br />
11,4 -0,2<br />
90°<br />
1,4<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
Door<br />
Side<br />
Cranking H T<br />
mm mm mm<br />
0,0 18,5 8,0<br />
9,5 28,0 17,5<br />
Overlay mm<br />
6,5 7,5 8,5 9,5 10,5 11,5 12,5 13,5 14,5 15,5 16,5 17,5<br />
Distance 11 10 9 8 7 6 5 4 3 2 1 0<br />
D mm<br />
Overlay adjustment ± 2,5 mm<br />
Overlay mm<br />
-3 0 1,5 2,5 3,5 4,5 5,5 6,5 8<br />
Distance 11 8 6,5 5,5 4,5 3,5 2,5 1,5 0<br />
D mm<br />
Overlay adjustment ± 2,5 mm<br />
125°<br />
Concealed hinges Intermat <strong>3.1.</strong>79<br />
T<br />
H<br />
65
<strong>3.1.</strong>80<br />
Fast-assembly folding-door hinge<br />
Intermat 9930<br />
for corner cabinets, opening angle 50°/65°<br />
Hinge versions<br />
Cranking -5 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
• Concealed hinge for snap-on attachment<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated depth adjustment<br />
• Integrated cam depth adjustment<br />
• Integrated diagonal adjustment<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Mounting options Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup T43<br />
Press-in<br />
Cup TB43<br />
Press-in<br />
Concealed hinges Intermat www.hettich.com<br />
50°<br />
65°<br />
Cup Flash<br />
Fast-assembly<br />
9930-T42 9930-T43 9930-TB43 9930-Flash<br />
0 045 036 0 045 037 0 045 038 0 045 039<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
!<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
�<br />
52<br />
ø35<br />
C<br />
5,5<br />
11,3<br />
52<br />
11 11,3<br />
T42 hole dimensions T43 hole dimensions/Flash TB43 hole dimensions<br />
ø35<br />
C<br />
5,5<br />
ø10<br />
Features:<br />
• Identical door elements<br />
• No cutaway required in cup holes<br />
• Simple adaptation to door thickness by diagonal adjustment<br />
• Hole line distance in attached door 41 mm<br />
Reveal<br />
Cabinet hinge,<br />
e.g. wide angle hinge<br />
Viewed<br />
"free" door<br />
�<br />
Depth<br />
adjustment<br />
Calculating distance D<br />
Example:<br />
C-distance 4,5 � D 0<br />
C-distance 3,0 � D 1,5<br />
41*<br />
Side<br />
adjustment<br />
Centre reveal<br />
5 mm<br />
50°<br />
Reveal<br />
Diagonal<br />
adjustment<br />
* 41/ *37 = Position for screw-fastening the mounting plate<br />
5<br />
65°<br />
Fast-assembly folding-door hinge<br />
Intermat 9930<br />
for corner cabinets, opening angle 50°/65°<br />
At the start of its swing, the door element opens about 50°<br />
on the handle side.<br />
This ensures that the whole corner cabinet door moves clear<br />
of any adjacent doors or drawer fronts.<br />
In the open position, the two door elements form a straight line.<br />
The cabinet interior is fully accessible for user convenience.<br />
The self-closing feature eliminates the need for a catch<br />
on the handle side.<br />
45<br />
11<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,3<br />
Features:<br />
• All cup holes in one door<br />
• Hairline reveal possible between door elements<br />
• No cutaway required in cup holes<br />
• Identical door width for both elements<br />
• Simple adaptation to door thickness by diagonal adjustment<br />
• Identical cup distance on both sides of attached door<br />
• Hole line distance in free door 37 mm<br />
Reveal<br />
Viewed<br />
"free" door<br />
Cabinet hinge,<br />
e.g. wide angle hinge<br />
The diagonal adjustment can be used to adjust the hinges for different door thicknesses from 16 - 21 mm<br />
and different cup distances from 3 - 6 mm.<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
�<br />
Calculating distance D<br />
Example:<br />
C-distance 4,5 � D 0<br />
C-distance 3,0 � D 1,5<br />
Hairline reveal<br />
50°<br />
37*<br />
Reveal<br />
Diagonal adjustment<br />
65°<br />
Depth adjustment<br />
Side adjustment<br />
Concealed hinges Intermat <strong>3.1.</strong>81
<strong>3.1.</strong>82<br />
Fast-assembly folding-door hinge<br />
Intermat 9930 FIX<br />
for corner cabinets, opening angle 50°/65°<br />
Hinge versions<br />
Cranking -5 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
• Concealed hinge for snap-on attachment<br />
• Toolless cup assembly<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated depth adjustment<br />
• Integrated eccentric side adjustment<br />
• Integrated diagonal adjustment<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup T FIX<br />
Toolless<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Concealed hinges Intermat www.hettich.com<br />
!<br />
50°<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9930-T FIX 9930-TH FIX 9930-TB FIX<br />
0 045 041 0 045 042 0 045 043<br />
65°<br />
PU<br />
1/50
�<br />
Reveal<br />
ø35<br />
Cabinet hinge,<br />
e.g. wide angle hinge<br />
Viewed<br />
"free" door<br />
�<br />
Depth<br />
adjustment<br />
Calculating distance D<br />
Example:<br />
C-distance 4,5 � D 0<br />
C-distance 3,0 � D 1,5<br />
C<br />
11,8<br />
41*<br />
Side<br />
adjustment<br />
Centre reveal<br />
5 mm<br />
50°<br />
Reveal<br />
Diagonal<br />
adjustment<br />
* 41/ *37 = Position for screw-fastening the mounting plate<br />
52<br />
T FIX hole dimensions TH FIX hole dimensions TB FIX hole dimensions<br />
ø35<br />
6 11,8<br />
5<br />
65°<br />
Reveal<br />
Calculating distance D<br />
Example:<br />
C-distance 4,5 � D 0<br />
C-distance 3,0 � D 1,5<br />
Viewed<br />
"free" door<br />
Cabinet hinge,<br />
e.g. wide angle hinge<br />
The diagonal adjustment can be used to adjust the hinges for different door thicknesses from 16 - 21 mm<br />
and different cup distances from 3 - 6 mm.<br />
C<br />
5,5<br />
ø10<br />
Features:<br />
• Identical door elements<br />
• No cutaway required in cup holes<br />
• Simple adaptation to door thickness by diagonal adjustment<br />
• Hole line distance in attached door 41 mm<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
�<br />
Fast-assembly folding-door hinge<br />
Intermat 9930 FIX<br />
for corner cabinets, opening angle 50°/65°<br />
At the start of its swing, the door element opens about 50°<br />
on the handle side.<br />
This ensures that the whole corner cabinet door moves clear<br />
of any adjacent doors or drawer fronts.<br />
In the open position, the two door elements form a straight line.<br />
The cabinet interior is fully accessible for user convenience.<br />
The self-closing feature eliminates the need for a catch<br />
on the handle side.<br />
45<br />
6<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,8<br />
Features:<br />
• All cup holes in one door<br />
• Hairline reveal possible between door elements<br />
• No cutaway required in cup holes<br />
• Identical door width for both elements<br />
• Simple adaptation to door thickness by diagonal adjustment<br />
• Identical cup distance on both sides of attached door<br />
• Hole line distance in free door 37 mm<br />
Hairline reveal<br />
50°<br />
37*<br />
Reveal<br />
Diagonal adjustment<br />
65°<br />
Depth adjustment<br />
Side adjustment<br />
Concealed hinges Intermat <strong>3.1.</strong>83
<strong>3.1.</strong>84<br />
Fast-assembly concealed hinge<br />
Intermat 9945<br />
with 12 mm overlay adjustment, opening angle 95°<br />
Hinge versions<br />
Factory setting:<br />
14,5 mm overlay<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge for snap-on attachment<br />
• Suitable for overlay and inset doors<br />
• With 12 mm infinitely variable, parallel guided overlay adjustment<br />
• Factory overlay setting: 14,5 mm<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: nickel-plated steel<br />
• Hinge arm: nickel-plated die-cast zinc<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Article/Order no.<br />
9945-T42<br />
0 074 684<br />
Order no. PU<br />
0 048 296 200<br />
Concealed hinges Intermat www.hettich.com<br />
95°<br />
PU<br />
1/50
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,9 5,7<br />
4 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,8 4,5 5,3<br />
4,5 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,7 4,3 5,1<br />
5 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,4 2,7 3,2 3,6 4,2 4,9<br />
6 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,3 2,6 3,1 3,5 4,0 4,6<br />
7 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,9 2,2 2,6 3,0 3,4 3,9 4,4<br />
8 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,8 2,1 2,5 2,9 3,3 3,7 4,2<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
ø35<br />
T42 hole dimensions<br />
Door<br />
Push-To-Open<br />
Overlay<br />
Reveal<br />
Side<br />
Overlay<br />
Distance D<br />
2 x Reveal<br />
Side<br />
Reveal<br />
C<br />
5,5<br />
Distance D<br />
11,3<br />
Overlay<br />
adjustment<br />
12 mm<br />
Cup distance C<br />
Side<br />
Distance D<br />
Distance D<br />
Door<br />
Overlay<br />
adjustment<br />
12 mm<br />
Cup distance C<br />
Overlay<br />
adjustment<br />
12 mm<br />
Door<br />
Door<br />
Door<br />
thickness<br />
Cup distance C<br />
Silent System, see pages <strong>3.1.</strong>104 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Fast-assembly concealed hinge<br />
Intermat 9945<br />
with 12 mm overlay adjustment, opening angle 95°<br />
C-distance Door overlay 10 11 12 13 14 15 16 17 18 19 20 21 22<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
Distance 0 0 0 0 0 0 0 0<br />
Adjustment 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Distance 0 0 0 0 0 0 0 0 0<br />
Adjustment 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Distance 0 0 0 0 0 0 0 0 0 0<br />
Adjustment 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Distance 0 0 0 0 0 0 0 0 0 0 0<br />
Adjustment 10,5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Distance 0 0 0 0 0 0 0 0 0 0 0 0<br />
Adjustment 11,5 10,5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Distance 0 0 0 0 0 0 0 0 0 0 0 0 0<br />
Adjustment 12,5 11,5 10,5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
C-distance Door overlay 0 1 2 3 4 5 6 7 8 9<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
Distance 8,0 5,0 5,0 3,0 1,5 0 0 0 0 0<br />
Adjustment 9,5 11,5 10,5 11,5 12,0 12,5 11,5 10,5 9,5 8,5<br />
Distance 8,0 8,0 5,0 5,0 3,0 1,5 0 0 0 0<br />
Adjustment 10,5 9,5 11,5 10,5 11,5 12,0 12,5 11,5 10,5 9,5<br />
Distance 8,0 8,0 8,0 5,0 5,0 3,0 1,5 0 0 0<br />
Adjustment 11,5 10,5 9,5 11,5 10,5 11,5 12,0 12,5 11,5 10,5<br />
Distance 8,0 8,0 8,0 8,0 5,0 5,0 3,0 1,5 1,5 0<br />
Adjustment 12,5 11,5 10,5 9,5 11,5 10,5 11,5 12,0 11,0 11,5<br />
Distance 11,0 8,0 8,0 8,0 8,0 5,0 5,0 3,0 1,5 1,5<br />
Adjustment 10,5 12,5 11,5 10,5 9,5 11,5 10,5 11,5 12,0 11,0<br />
Distance 11,0 11,0 8,0 8,0 8,0 8,0 5,0 5,0 3,0 1,5<br />
Adjustment 11,5 10,5 12,5 11,5 10,5 9,5 11,5 10,5 11,5 12,0<br />
C-distance Door thickness 16 17 18 19 20 21 22 23 24 25 26 27 28 29<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
Hinge protrusion/<br />
door protrusion<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Distance 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 11,0 11,0 11,0<br />
Adjustment 9,9 10,1 10,3 10,5 10,7 11,0 11,3 11,6 12,0 12,4 12,9 10,5 11,4 12,2<br />
Distance 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 11,0 11,0 11,0 11,0 11,0 11,0<br />
Adjustment 10,9 11,1 11,3 11,5 11,7 12,0 12,3 12,6 10,0 10,3 10,8 11,3 12,0 12,8<br />
Distance 8,0 8,0 8,0 8,0 8,0 8,0 11,0 11,0 11,0 11,0 11,0 11,0 11,0<br />
Adjustment 11,9 12,1 12,3 12,5 12,7 12,9 10,2 10,5 10,9 11,2 11,7 12,1 12,7<br />
Distance 11,0 11,0 11,0 11,0 11,0 11,0 11,0 11,0 11,0 11,0 11,0<br />
Adjustment 9,9 10,1 10,3 10,5 10,7 10,9 11,2 11,5 11,8 12,1 12,6<br />
Distance 11,0 11,0 11,0 11,0 11,0 11,0 11,0 11,0<br />
Adjustment 10,9 11,0 11,2 11,4 11,6 11,8 12,1 12,4<br />
Distance 11,0 11,0 11,0 11,0 11,0 11,0<br />
Adjustment 11,9 12,0 12,2 12,4 12,6 12,8<br />
Side<br />
Door<br />
39,5<br />
8,5<br />
95°<br />
Concealed hinges Intermat <strong>3.1.</strong>85<br />
65
<strong>3.1.</strong>86<br />
Fast assembly single-pivot hinge<br />
Intermat Konsul 5<br />
For rebated doors, opening angle 180°<br />
Hinge versions<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Order no. PU<br />
0 013 300 1/50<br />
• Single-pivot hinge with visible knuckle and snap-on assembly<br />
• With or without decorative finials<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• Knuckle is centred on 19 mm cabinet side<br />
• With self-closing<br />
• Integrated overlay adjustment - 2,0 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: die-cast zinc<br />
Cup versions<br />
Cup T22<br />
Screw on<br />
Article/Order no.<br />
Konsul 5 with decorative finials<br />
Konsul 5-T22 Konsul 5-T22<br />
brass-plated bronze<br />
knuckle brushed (antique)<br />
0 079 417 0 079 418<br />
Konsul 5 without decorative finials<br />
Konsul 5-T22 Konsul 5-T22 Konsul 5-T22<br />
nickel-plated bronze brass-plated<br />
1 081 459 1 081 460 1 081 456<br />
Hinge-arm cover cap<br />
• Nickel-plated steel • Bronze-plated steel • Brass-plated steel<br />
Order no. PU<br />
0 048 366 1/50<br />
Concealed hinges Intermat www.hettich.com<br />
180°<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 365 1/50
Side<br />
4,7<br />
Overlay 5<br />
ø35<br />
52<br />
T22 hole dimensions<br />
8<br />
Distance D<br />
Reveal<br />
10<br />
5,5<br />
Door<br />
10<br />
14 4<br />
Mounting plate system 9000<br />
for Intermat Konsul 5<br />
6<br />
Overlay adjustment - 2 mm<br />
5,5<br />
ø35<br />
52<br />
71<br />
14<br />
5,5<br />
Fast assembly single-pivot hinge<br />
Intermat Konsul 5<br />
For rebated doors, opening angle 180°<br />
ø35<br />
52<br />
Cup dimensions Cup dimensions<br />
Intermat Konsul 5 Intermat Konsul 5<br />
with decorative finials without decorative finials<br />
Article Distance Finish Distance Order no. PU<br />
Hole line mm Nr.<br />
Screw-on cross mounting plate<br />
• Hole distance 32 mm<br />
• With elongated 5.4 mm ø holes<br />
for height adjustment ± 2 mm<br />
• Steel<br />
Screw-on cross mounting plate <strong>Hettich</strong> Direkt<br />
• Hole distance 32 mm<br />
• With pre-mounted locating pegs and<br />
asymmetrically positioned special screws for<br />
drilling ø 5 x 7,5 mm<br />
• Elongated holes for height adjustment ± 2 mm<br />
• Steel<br />
Door overlay 5 mm<br />
for a mounting plate<br />
with 0 mm distance<br />
ø5<br />
min.<br />
15<br />
7,5<br />
37<br />
37<br />
32<br />
32<br />
43<br />
14<br />
37 mm nickel-plated 0 0 072 983 1/50<br />
bronze 0 0 079 700 1/50<br />
brass-plated 0 0 079 701 1/50<br />
Fasten with<br />
countersunk wood<br />
screws ø 4,5 mm<br />
No door protrusion<br />
free space for<br />
internal pull out<br />
components<br />
Door<br />
Side<br />
180°<br />
18,5<br />
37 mm nickel-plated 0 0 079 276 1/50<br />
bronze 0 0 079 702 1/50<br />
brass-plated 0 0 079 703 1/50<br />
Concealed hinges Intermat <strong>3.1.</strong>87<br />
65
<strong>3.1.</strong>88<br />
Mounting plate system 9000<br />
for Intermat and Ecomat hinges<br />
Article Distance Distance Order no.<br />
Hole line mm PU PU<br />
mm 1/50 400<br />
Screw-on cross mounting plate<br />
• Hole distance 32 mm<br />
• With elongated 5,4 mm ø holes<br />
for height adjustment ± 2 mm<br />
• Fixing with countersunk<br />
wood screws ø 4,5 mm<br />
• Steel/*nickel-plated die-cast zinc<br />
Patented screw-on cross<br />
mounting plate <strong>Hettich</strong> Direkt<br />
• Half overlay applications<br />
from 15 mm side panel<br />
thickness possible<br />
• Hole distance 32 mm<br />
• with pre-mounted locating pegs and<br />
asymmetrically positioned special screws for<br />
drilling ø 5 x 7,5 mm<br />
• Elongated holes for height adjustment ± 2 mm<br />
• Steel/*nickel-plated die-cast zinc<br />
Screw-on cross mounting plate<br />
• Hole distance 32 mm<br />
• With premounted Euroscrews<br />
for 5 mm ø x 12 mm holes<br />
• Elongated holes for<br />
height adjustment ± 2 mm<br />
• Steel/*nickel-plated die-cast zinc<br />
Screw-on cross mounting plate<br />
• Possible from 16 mm side panel<br />
thickness<br />
• Hole distance 32 mm<br />
• With special premounted screws<br />
and plastic sockets for drilling<br />
ø 5 x 12 mm drill holes<br />
• Elongated holes for height adjustment ± 2 mm<br />
• Steel/*nickel-plated die-cast zinc<br />
Screw-on<br />
cross mounting plate<br />
• Hole distance 32 mm<br />
• For face frame cabinets<br />
with overlay doors<br />
• Elongated holes for height<br />
adjustment ± 2 mm<br />
• Fixing with countersunk wood screws ø 4 mm<br />
• Nickel-plated die-cast zinc<br />
Screw-on cross mounting plate<br />
• Hole distance 40 mm<br />
• For face frame cabinets<br />
with overlay doors<br />
• Eccentric height adjustment ± 2 mm<br />
• Fixed with pan-head screw ø 4 mm<br />
• Nickel-plated die-cast zinc<br />
ø5<br />
ø5<br />
Side<br />
Frame<br />
Side<br />
Frame<br />
min.<br />
15<br />
7,5<br />
12<br />
min.<br />
15<br />
12<br />
Door<br />
Door<br />
37<br />
37<br />
37<br />
37<br />
40<br />
Concealed hinges Intermat www.hettich.com<br />
32<br />
32<br />
32<br />
32<br />
32<br />
37 0,05 0 072 983 1 071 605<br />
1,5 0 072 984 1 071 606<br />
3,0 0 072 985 1 071 607<br />
5,0 0 072 986 –<br />
8,0* 0 072 987 –<br />
11,0* 0 077 946 –<br />
37 0,0,5 0 079 276 –<br />
1,5 0 079 277 –<br />
3,0 0 078 926 –<br />
5,0 0 079 278 –<br />
8,0* 0 079 279 –<br />
37 0,0 0 079 374 1 071 625<br />
1,5 0 079 375 1 071 626<br />
3,0 0 079 376 1 071 627<br />
5,0 0 079 377 –<br />
8,0* 0 079 378 –<br />
11,0* 0 079 379 –<br />
37 0,0 9 079 704 –<br />
1,5 9 079 705 –<br />
3,0 9 079 706 –<br />
5,0 0 046 983 –<br />
8,0* 0 046 984 –<br />
0,0,5 0 079 382 –<br />
4,5 0 079 383 –<br />
0,0,5<br />
PU 200<br />
0 040 221<br />
4,5 0 040 222
15 37<br />
Mounting plate system 9000<br />
for Intermat and Ecomat hinges<br />
with eccentric height adjustment<br />
Article Distance Distance Order no. PU<br />
Hole line mm<br />
mm<br />
Screw-on cross mounting plate <strong>Hettich</strong> Top<br />
for full overlay applications<br />
• Possible from 15 mm side panel<br />
thickness<br />
• Hole distance 32 mm<br />
• With special premounted screws and<br />
plastic sockets for drilling ø 5 x 12 mm<br />
drill holes<br />
• Eccentric height adjustment ± 2 mm<br />
• Nickel-plated die-cast zinc<br />
Patented screw-on cross mounting plate<br />
<strong>Hettich</strong> Direkt Top for full and half overlay<br />
applications<br />
• Possible from 15 mm side panel thickness<br />
• Hole distance 32 mm<br />
• With pre-mounted locating pegs<br />
and asymmetrically positioned special<br />
screws for drilling ø 5 x 7,5 mm<br />
• Eccentric height adjustment ±2 mm<br />
• Nickel-plated die-cast zinc<br />
Screw-on cross mounting plate<br />
<strong>Hettich</strong> Top for full overlay<br />
applications<br />
• Possible from 15 mm side panel<br />
thickness<br />
• Hole distance 32 mm<br />
• With pre-mounted chipboard<br />
screws<br />
• Eccentric height<br />
adjustment ± 2 mm<br />
• Nickel-plated<br />
die-cast zinc<br />
<strong>Hettich</strong> Top screw-on cross mounting plate<br />
for half-overlay applications<br />
• Possible from 15 mm side panel thickness<br />
• Hole distance 32 mm<br />
• With premounted, asymmetrically<br />
positioned chipboard screws<br />
• Eccentric height adjustment ± 2 mm<br />
• Nickel-plated die-cast zinc<br />
min.<br />
min.<br />
15 37<br />
ø5<br />
ø5<br />
min.<br />
15<br />
12<br />
12<br />
min.<br />
15<br />
7,5<br />
min.<br />
15<br />
12<br />
min.<br />
15<br />
37<br />
37<br />
37<br />
37<br />
32<br />
32<br />
32<br />
32<br />
37 0,0,0 0 060 000 1/50<br />
1,5 0 060 001 1/50<br />
3,0 0 060 002 1/50<br />
5,0 0 060 003 1/50<br />
8,0 0 060 004 1/50<br />
37 0,0,0 0 020 009 1/50<br />
1,5 0 020 010 1/50<br />
3,0 0 020 011 1/50<br />
5,0 0 020 012 1/50<br />
8,0 0 020 013 1/50<br />
37 0,0,0 0 043 021 1/50<br />
1,5 0 043 022 1/50<br />
3,0 0 043 023 1/50<br />
5,0 0 043 024 1/50<br />
8,0 0 043 025 1/50<br />
37 0,0,0 0 043 026 1/50<br />
1,5 0 043 027 1/50<br />
3,0 0 043 028 1/50<br />
5,0 0 043 029 1/50<br />
8,0 0 043 031 1/50<br />
Hole marking template for screw-on cross mounting<br />
plates with pre-mounted chipboard screws for half<br />
overlay applications<br />
Order no. PU<br />
0 045 150 1<br />
Concealed hinges Intermat <strong>3.1.</strong>89
<strong>3.1.</strong>90<br />
Mounting plate system 9000<br />
for Intermat and Ecomat hinges<br />
with eccentric height adjustment, angle mounting plates<br />
Article Distance Distance mm/ Order no. PU<br />
Hole line Angle<br />
mm<br />
Screw-on cross mounting plate<br />
for overlay mounting<br />
• Possible from 15 mm side panel<br />
thickness<br />
• Hole distance 32 mm<br />
• With premounted Euroscrews for<br />
5 mm ø x 12 mm holes<br />
• Eccentric height adjustment ± 2 mm<br />
• Nickel-plated die-cast zinc<br />
InLine screw-on mounting plates<br />
• Hole distance 32 mm<br />
• for direct fixing with<br />
chipboard screw ø 3,5 mm<br />
• Parallel eccentric height<br />
adjustment ±2 mm<br />
• Nickel-plated die-cast zinc<br />
InLine knock-in mounting plates<br />
• Hole distance 32 mm<br />
• Press-in type<br />
• For ø 10 x 11.5 mm<br />
holes<br />
• Parallel eccentric height<br />
adjustment ±2 mm<br />
• Nickel-plated die-cast zinc<br />
Angle plate<br />
for cross mounting plate<br />
• Silver-grey plastic<br />
Can only be used<br />
with screw-on<br />
cross mounting plate<br />
Order no.<br />
0072983-0072987,<br />
0 077 946<br />
(see page <strong>3.1.</strong>88)<br />
Assembly note angle plates 5°/10°:<br />
1. Sockets<br />
or<br />
2,5<br />
Insert in ø 5 mm hole<br />
line drilling<br />
2,5 9,5<br />
2. Mounting and angle plates<br />
Fasten with chipboard screws ø 4 mm<br />
or ø 4,5 mm.<br />
13<br />
5°<br />
Socket no. 41<br />
Socket no. 42<br />
ø5<br />
ø10<br />
min.<br />
15<br />
12<br />
11,5<br />
5° 10°<br />
37<br />
Order no. PU<br />
0 048 575 1/200<br />
Order no. PU<br />
0 048 574 1/200<br />
32<br />
Concealed hinges Intermat www.hettich.com<br />
10°<br />
32<br />
20<br />
32<br />
20<br />
15°<br />
37 0,0,0 9 079 695 1/50<br />
1,5 9 079 700 1/50<br />
3,0 9 079 701 1/50<br />
5,0 9 079 702 1/50<br />
8,0 9 079 703 1/50<br />
20 1,5 0 043 017 1/50<br />
3,0 0 043 018 1/50<br />
5,0 0 043 019 1/50<br />
20 1,5 0 042 814 1/50<br />
3,0 0 042 813 1/50<br />
5,0 0 042 815 1/50<br />
37 5° 0 079 349 1/50<br />
10° 0 079 350 1/50<br />
Notes:<br />
Simply turn the plastic angle<br />
mounting plates to either<br />
increase or decrease the<br />
cabinet angle.<br />
Plastic angle mounting<br />
plates are stackable.<br />
A trial mounting is always recommended<br />
for configurations of this type!
System 9000 angle and parallel adapter<br />
for Intermat and Ecomat hinges<br />
Article Distance Distance mm/ Order no. PU<br />
Hole line Angle<br />
mm<br />
Angle adapter<br />
for cross mounting plates<br />
• Nickel-plated die-cast zinc<br />
• 1 PU contains<br />
50 angle plates and<br />
50 fixing screws<br />
Parallel adapter for cross<br />
mounting plates<br />
• Nickel-plated die-cast zinc<br />
• 1 PU contains<br />
50 parallel adapters and<br />
50 fixing screws<br />
5°<br />
15°<br />
90°<br />
10°<br />
5°<br />
15°<br />
10°<br />
37 5° 0 043 036 1/50<br />
10° 0 043 037 1/50<br />
15° 0 043 038 1/50<br />
Notes:<br />
When using the die-cast<br />
zinc angle adapter, the<br />
cabinet angle can only<br />
be increased.<br />
Die-cast zinc angle<br />
adapters are not<br />
stackable.<br />
37 12 0 043 032 1/50<br />
22 0 043 033 1/50<br />
A trial mounting is always recommended<br />
for configurations with angle and parallel<br />
adapter!<br />
Angle and parallel adapters can be used<br />
with all cross mounting plates on page<br />
<strong>3.1.</strong>88 – except order numbers<br />
0 079 382 and 0 079 383.<br />
Concealed hinges Intermat <strong>3.1.</strong>91
<strong>3.1.</strong>92<br />
Accessories for Intermat and Ecomat hinges<br />
Cover cap for Intermat hinges<br />
• Nickel-plated steel<br />
� �<br />
Cover cap Order no. PU<br />
� without logo 0 013 300 1/50<br />
� with <strong>Hettich</strong> logo 9 003 932 1/2000<br />
Fixing screws<br />
Cover cap 35<br />
• For drilling diameter 35 mm<br />
• Plastic<br />
Stop attachment<br />
• For drilling diameter 5 mm<br />
• Transparent plastic<br />
Stop attachment<br />
• For drilling diameter 6 mm<br />
• Plastic<br />
Stop attachment<br />
• ø 8 mm, self-adhesive<br />
• Transparent plastic<br />
9,5<br />
1,5<br />
1,5<br />
ø36,5<br />
ø8<br />
ø8<br />
ø5<br />
5,5<br />
7<br />
ø6<br />
Cover cap for Ecomat hinges<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 079 790 1/50<br />
Article Order no. PU<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
0 048 296 200<br />
Hinge-cup fixing screw<br />
ø 3,5 x 9,5 mm for aluminium framed doors<br />
0 041 296 200<br />
Hinge-cup fixing screw<br />
for glass panel thicknesses of 5,5 - 6,5 mm<br />
Mounting-plate fixing screw<br />
For drilling diameter 5 mm<br />
9 082 429 200<br />
ø 6,3 x 11 mm 0 047 451 200<br />
ø 6,3 x 14 mm 0 047 452 200<br />
ø 6,3 x 18 mm 0 052 799 200<br />
Special sheet metal screw<br />
ø 3,9 x 9,5 mm<br />
0 041 331 200<br />
Special sheet metal screw<br />
ø 4,8 x 13 mm<br />
0 041 329 200<br />
Special screw and socket 0 045 169 200<br />
Finish Order no. PU<br />
white 0 025 204 1/100<br />
brown 0 025 205 1/100<br />
black 0 071 832 1/100<br />
Order no. PU<br />
9 079 298 1/1000<br />
Finish Order no. PU<br />
white 0 025 048 1/1000<br />
brown 0 021 154 1/1000<br />
beige 0 047 353 1/1000<br />
Bestell-Nr. VE<br />
0 072 120 50<br />
0 046 695 1000<br />
Concealed hinges Intermat www.hettich.com
Mounting configurations<br />
for 40° to 160° face angles<br />
… 60 mounting configurations for<br />
various face angles from 40° - 160°,<br />
door and side options with detailed<br />
parts list provide practical working<br />
and constructional aids for the<br />
fabricator.<br />
All drawings are also available for<br />
downloading from the Internet.<br />
For all other details, go to:<br />
www.hettich.com<br />
Mounting configurations Intermat<br />
The following pages list 60 mounting<br />
configurations for cabinet face angles<br />
from 40° to 160° with different door<br />
and side designs.<br />
These door situations can be achieved<br />
with the Intermat hinge range, in<br />
particular the W hinge versions, using<br />
the appropriate mounting plates, angle<br />
and parallel adapters and stackable<br />
angle mounting plates.<br />
All mounting configurations feature<br />
the T42 cup version. All hinges can<br />
also be mounted using other cup<br />
versions (T43, TB43, Flash, TFIX, THFIX<br />
or TBFIX).<br />
A trial mounting is always<br />
recommended for mounting<br />
configurations of this type !<br />
40°<br />
45°<br />
50°<br />
60°<br />
70°<br />
80°<br />
90°<br />
Mounting configurations Intermat <strong>3.1.</strong>93<br />
55°<br />
65°<br />
75°<br />
85°<br />
95°<br />
105°<br />
115°<br />
100°<br />
110°<br />
125° 120°<br />
135° 130°<br />
145°<br />
140°<br />
155°<br />
150°<br />
160°
<strong>3.1.</strong>94<br />
Mounting configurations Intermat<br />
37<br />
6<br />
19<br />
90°<br />
19<br />
Intermat 9943<br />
Cranking 0 mm Order no. 0 048 049<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
37<br />
20<br />
28<br />
11 ø40<br />
90°<br />
19<br />
Intermat 9935<br />
Cranking -5 mm Order no. 0 073 925<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
37<br />
26<br />
26<br />
3<br />
11<br />
11<br />
90°<br />
ø40<br />
Intermat 9935<br />
Cranking 16 mm Order no. 0 073 927<br />
Mounting plate distance 11 mm Order no. 0 077 946<br />
20<br />
20<br />
37<br />
Mounting configurations Intermat www.hettich.com<br />
37<br />
20<br />
11<br />
19<br />
ø40<br />
90°<br />
19<br />
Intermat 9935<br />
Cranking 5 mm Order no. 0 073 926<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
10<br />
19<br />
11 ø40<br />
90°<br />
19<br />
Intermat 9935<br />
Cranking -5 mm Order no. 0 073 925<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
37<br />
53<br />
R 2<br />
0,5<br />
19<br />
90°<br />
Intermat 9956<br />
Cranking 9,5 mm Order no. 0 072 961<br />
Mounting plate distance 3 mm Order no. 0 072 985<br />
Opening angle limited to 130°<br />
with adjusting screw M5 x 14 mm Order no. 0 079 791<br />
19
38<br />
11 10<br />
10<br />
19<br />
2<br />
1<br />
8<br />
11<br />
90°<br />
Intermat 9956<br />
Cranking 9,5 mm Order no. 0 072 961<br />
Mounting plate distance 5 mm Order no. 0 072 986<br />
Opening angle limited to 130°<br />
with adjusting screw M5 x 14 mm Order no. 0 079 791<br />
Intermat 9936 W90<br />
Cranking 5 mm Order no. 0 077 708<br />
Mounting plate distance 5 mm Order no. 0 072 986<br />
58<br />
19<br />
19 19<br />
19<br />
1,2<br />
5<br />
3<br />
4,5<br />
min. 62<br />
40°<br />
19<br />
22<br />
Intermat 9944 W-45<br />
Cranking 10 mm Order no. 0 077 643<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle plate 5° Order no. 0 079 349<br />
1,5<br />
19<br />
4,5<br />
!<br />
4,5<br />
19<br />
19<br />
Mounting configurations Intermat<br />
min. 62<br />
22<br />
5<br />
1,5<br />
Intermat 9936 W90<br />
Cranking 5 mm Order no. 0 077 708<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
22<br />
19<br />
19<br />
5<br />
1,5<br />
19<br />
Intermat 9936 W90<br />
Cranking 5 mm Order no. 0 077 708<br />
Mounting plate distance 5 mm Order no. 0 072 986<br />
50<br />
9,5<br />
4,5<br />
14,5<br />
45°<br />
19<br />
Intermat 9944 W-45<br />
Cranking 10 mm Order no. 0 077 643<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
4,5<br />
Mounting configurations Intermat <strong>3.1.</strong>95<br />
19
<strong>3.1.</strong>96<br />
Mounting configurations Intermat<br />
19<br />
65 11,9<br />
4,5 16,1<br />
50°<br />
Intermat 9944 W-45<br />
Cranking 10 mm Order no. 0 077 643<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle plate 5° Order no. 0 079 349<br />
51<br />
19<br />
9<br />
4,5<br />
10,5<br />
65°<br />
Intermat 9944 W-30<br />
Cranking 12 mm Order no. 0 073 936<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 5° Order no. 0 043 036<br />
51<br />
4,5<br />
19<br />
15<br />
15<br />
19<br />
75°<br />
Intermat 9944 W-30<br />
Cranking 12 mm Order no. 0 073 936<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 15° Order no. 0 043 038<br />
19<br />
19<br />
Mounting configurations Intermat www.hettich.com<br />
46,5<br />
19<br />
14<br />
4,5<br />
16,5<br />
60°<br />
19<br />
Intermat 9944 W-30<br />
Cranking 12 mm Order no. 0 073 936<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
51<br />
19<br />
4,5<br />
12<br />
13<br />
70°<br />
Intermat 9944 W-30<br />
Cranking 12 mm Order no. 0 073 936<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 10° Order no. 0 043 037<br />
38,5<br />
19<br />
2<br />
8<br />
19<br />
75°<br />
Intermat 9936<br />
Cranking 0 mm Order no. 0 073 913<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle plate 10° Order no. 0 079 350<br />
Angle plate 5° Order no. 0 079 349<br />
19
39<br />
19<br />
1,5<br />
4,5<br />
75° 19<br />
Intermat 9943<br />
Cranking 0 mm Order no. 0 048 049<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle plate 10° Order no. 0 079 350<br />
Angle plate 5° Order no. 0 079 349<br />
38<br />
19<br />
3<br />
8<br />
4,5<br />
19<br />
80°<br />
Intermat 9943<br />
Cranking 0 mm Order no. 0 048 049<br />
Mounting plate distance 8 mm Order no. 0 072 987<br />
Angle plate 10° Order no. 0 079 350<br />
38<br />
19<br />
5<br />
4,5<br />
19<br />
85°<br />
Intermat 9943<br />
Cranking 16 mm Order no. 0 048 052<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle plate 5° Order no. 0 079 349<br />
19<br />
38<br />
4,5<br />
Mounting configurations Intermat<br />
5<br />
80°<br />
19<br />
Intermat 9943<br />
Cranking 0 mm Order no. 0 048 049<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle plate 10° Order no. 0 079 350<br />
37<br />
4,5<br />
19<br />
11<br />
11,5<br />
19<br />
85°<br />
Intermat 9943<br />
Cranking 0 mm Order no. 0 048 049<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle plate 5° Order no. 0 079 349<br />
38<br />
4,5<br />
19<br />
10<br />
11<br />
95°<br />
Intermat 9943<br />
Cranking 0 mm Order no. 0 048 049<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 5° Order no. 0 043 036<br />
19<br />
Mounting configurations Intermat <strong>3.1.</strong>97
41<br />
42<br />
<strong>3.1.</strong>98<br />
Mounting configurations Intermat<br />
39<br />
4,5<br />
19<br />
11<br />
14<br />
100°<br />
19<br />
Intermat 9943<br />
Cranking 0 mm Order no. 0 048 049<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 10° Order no. 0 043 037<br />
1<br />
19<br />
6 19<br />
105°<br />
Intermat 9943<br />
Cranking 0 mm Order no. 0 048 049<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 15° Order no. 0 043 038<br />
16<br />
1,1<br />
4,5<br />
105°<br />
Intermat 9943<br />
Cranking 16 mm Order no. 0 048 052<br />
Mounting plate distance 3 mm Order no. 0 072 985<br />
Angle adapter 15° Order no. 0 043 038<br />
16<br />
41<br />
41<br />
Mounting configurations Intermat www.hettich.com<br />
19<br />
4,5<br />
100°<br />
Intermat 9943<br />
Cranking 16 mm Order no. 0 048 052<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 10° Order no. 0 043 037<br />
4,5<br />
35,5<br />
4,5<br />
16<br />
12,5<br />
16,5<br />
11,5<br />
19<br />
11<br />
19<br />
16<br />
19<br />
105°<br />
Intermat 9943<br />
Cranking 0 mm Order no. 0 048 049<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 15° Order no. 0 043 038<br />
110°<br />
Intermat 9936 W20<br />
Cranking 7 mm Order no. 0 077 644<br />
Mounting plate distance 0 mm Order no. 0 072 983
35,5<br />
4,5<br />
36<br />
16<br />
2<br />
4,5<br />
3<br />
16<br />
110°<br />
Intermat 9936 W20<br />
Cranking - 9 mm Order no. 0 077 645<br />
Mounting plate distance 3 mm Order no. 0 072 985<br />
16<br />
4<br />
4,5<br />
115°<br />
Intermat 9936 W20<br />
Cranking - 9 mm Order no. 0 077 645<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 5° Order no. 0 043 036<br />
37<br />
16<br />
15,5<br />
8<br />
3<br />
16<br />
16<br />
120°<br />
Intermat 9936 W30<br />
Cranking 7 mm Order no. 0 077 690<br />
Mounting plate distance 3 mm Order no. 0 072 985<br />
34<br />
4,5<br />
16<br />
4<br />
Mounting configurations Intermat<br />
16<br />
115°<br />
Intermat 9936 W20<br />
Cranking 7 mm Order no. 0 077 644<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 5° Order no. 0 043 036<br />
38,5<br />
6<br />
19<br />
13 19<br />
120°<br />
Intermat 9936 W30<br />
Cranking 7 mm Order no. 0 077 690<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
36<br />
5<br />
16<br />
5<br />
6,5<br />
120°<br />
19<br />
Intermat 9936 W30<br />
Cranking 7 mm Order no. 0 077 690<br />
Mounting plate distance 5 mm Order no. 0 072 986<br />
Mounting configurations Intermat <strong>3.1.</strong>99
Mounting configurations Intermat<br />
36<br />
<strong>3.1.</strong>100<br />
6<br />
19<br />
13,5<br />
6,5<br />
19<br />
125°<br />
Intermat 9936 W30<br />
Cranking 7 mm Order no. 0 077 690<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 5° Order no. 0 043 036<br />
38<br />
4,5<br />
19<br />
16<br />
6,5<br />
19<br />
130°<br />
Intermat 9936 W30<br />
Cranking 7 mm Order no. 0 077 690<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 10° Order no. 0 043 037<br />
39,5<br />
20,5<br />
4,5<br />
10,5<br />
19<br />
8<br />
19<br />
135°<br />
Intermat 9936 W45<br />
Cranking 6 mm Order no. 0 077 699<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
6<br />
11<br />
40<br />
15<br />
20<br />
135°<br />
Mounting configurations Intermat www.hettich.com<br />
39<br />
19<br />
4,5<br />
2<br />
125°<br />
Intermat 9936 W30<br />
Cranking - 10 mm Order no. 0 073 928<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 5° Order no. 0 043 036<br />
41<br />
19<br />
4,5<br />
1,4<br />
19<br />
19<br />
130°<br />
Intermat 9936 W30<br />
Cranking - 10 mm Order no. 0 073 928<br />
Mounting plate distance 1,5 mm Order no. 0 072 984<br />
Angle adapter 10° Order no. 0 043 037<br />
Intermat 9936 W45<br />
Cranking 6 mm Order no. 0 077 699<br />
Mounting plate distance 0 mm Order no. 0 072 983
48<br />
4,5<br />
6,5<br />
19<br />
5,5<br />
19<br />
135°<br />
Intermat 9936 W45<br />
Cranking 0 mm Order no. 0 048 096<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
32<br />
5,5<br />
19<br />
8<br />
19<br />
135°<br />
Intermat 9936 W45<br />
Cranking 6 mm Order no. 0 077 699<br />
Mounting plate distance 8 mm Order no. 0 072 987<br />
26<br />
19<br />
4,5<br />
2<br />
5<br />
19<br />
135°<br />
Intermat 9936 W45<br />
Cranking - 17 mm Order no. 0 073 932<br />
Mounting plate distance 5 mm Order no. 0 072 986<br />
35<br />
4,5<br />
Mounting configurations Intermat<br />
19<br />
14<br />
5<br />
3<br />
19<br />
135°<br />
Intermat 9936 W45<br />
Cranking 6 mm Order no. 0 077 699<br />
Mounting plate distance 5 mm Order no. 0 072 986<br />
52,2<br />
2 7,9<br />
19<br />
19<br />
135°<br />
Intermat 9936 W45<br />
Cranking 0 mm Order no. 0 048 096<br />
Mounting plate distance 3 mm Order no. 0 072 985<br />
55<br />
R 2<br />
46<br />
2<br />
4,5<br />
19<br />
4,5<br />
R 2<br />
19<br />
135°<br />
Intermat 9936 W45<br />
Cranking - 17 mm Order no. 0 073 932<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Mounting configurations Intermat <strong>3.1.</strong>101
<strong>3.1.</strong>102<br />
Mounting configurations Intermat<br />
4,5<br />
42<br />
37<br />
34<br />
6<br />
4,5<br />
16<br />
16<br />
15,5<br />
19<br />
2,5<br />
1,5<br />
1<br />
16<br />
19<br />
16<br />
140°<br />
Intermat 9936 W45<br />
Cranking - 17 mm Order no. 0 073 932<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 5° Order no. 0 043 036<br />
150°<br />
Intermat 9936 W45<br />
Cranking 6 mm Order no. 0 077 699<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Angle adapter 15° Order no. 0 043 038<br />
150°<br />
Intermat 9936 W45<br />
Cranking 6 mm Order no. 0 077 699<br />
Mounting plate distance 1,5 mm Order no. 0 072 984<br />
Angle adapter 15° Order no. 0 043 038<br />
45<br />
48<br />
32<br />
6<br />
4,5<br />
19<br />
4,5<br />
16<br />
19<br />
19<br />
1,2<br />
16<br />
8<br />
19<br />
150°<br />
145°<br />
Intermat 9936 W45<br />
Cranking - 17 mm Order no. 0 073 932<br />
Mounting plate distance 1,5 mm Order no. 0 072 984<br />
Angle adapter 10° Order no. 0 043 037<br />
Intermat 9936 W45<br />
Cranking - 17 mm Order no. 0 073 932<br />
Mounting plate distance 3 mm Order no. 0 072 985<br />
Angle adapter 15° Order no. 0 043 038<br />
160°<br />
Intermat 9936 W45<br />
Cranking 6 mm Order no. 0 077 699<br />
Mounting plate distance 8 mm Order no. 0 072 987<br />
2 x Angle plate 10° Order no. 0 079 350<br />
1 x Angle plate 5° Order no. 0 079 349<br />
Mounting configurations Intermat www.hettich.com
120°<br />
35<br />
19<br />
8<br />
R 3<br />
5,5<br />
19<br />
5,5<br />
13<br />
11<br />
R 3<br />
R 3<br />
R 3<br />
60°<br />
Intermat 9936 W30<br />
Cranking 7 mm Order no. 0 077 690<br />
Mounting plate distance 8 mm Order no. 0 072 987<br />
Intermat 9944 W-30<br />
Cranking 12 mm Order no. 0 073 936<br />
Mounting plate distance 11 mm Order no. 0 077 946<br />
120° 120°<br />
37<br />
33<br />
33<br />
16 R 5<br />
8<br />
16<br />
6<br />
16<br />
10 10<br />
6<br />
Intermat 9936 W30<br />
Cranking 7 mm Order no. 0 077 690<br />
Mounting plate distance 8 mm Order no. 0 072987<br />
Intermat 9936 W30<br />
Cranking 7 mm Order no. 0 077 690<br />
Mounting plate distance 8 mm Order no. 0 072987<br />
37<br />
19<br />
90°<br />
19<br />
9<br />
18<br />
5<br />
19<br />
5<br />
8<br />
5<br />
3,5<br />
R 5<br />
19<br />
35<br />
19<br />
16<br />
53<br />
135°<br />
Intermat 9943<br />
Cranking 0 mm Order no. 0 048 049<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Intermat 9936 W45<br />
Cranking 6 mm Order no. 0 077 699<br />
Mounting plate distance 5 mm Order no. 0 072 986<br />
37<br />
19<br />
Mounting configurations Intermat<br />
90°<br />
1,5<br />
19<br />
16,5<br />
5<br />
19<br />
5<br />
9<br />
1,5<br />
Mounting configurations Intermat <strong>3.1.</strong>103<br />
29<br />
19<br />
120°<br />
Intermat 9943<br />
Cranking 0 mm Order no. 0 048 049<br />
Mounting plate distance 1,5 mm Order no. 0 072 984<br />
Intermat 9936 W30<br />
Cranking 7 mm Order no. 0 077 690<br />
Mounting plate distance 1,5 mm Order no. 0 072 984<br />
19<br />
90°<br />
3<br />
5<br />
1<br />
19<br />
19<br />
8<br />
1<br />
34<br />
120°<br />
Intermat 9943<br />
Cranking 16 mm Order no. 0 048 052<br />
Mounting plate distance 3 mm Order no. 0 072 985<br />
Intermat 9936 W30<br />
Cranking - 10 mm Order no. 0 073 928<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
37<br />
28<br />
90°<br />
8<br />
5<br />
19<br />
5,5<br />
8<br />
31<br />
28<br />
19<br />
135°<br />
Intermat 9936<br />
Cranking 16 mm Order no. 0 073 921<br />
Mounting plate distance 0 mm Order no. 0 072 983<br />
Intermat 9936 W45<br />
Cranking - 17 mm Order no. 0 073 932<br />
Mounting plate distance 0 mm Order no. 0 072 983
<strong>3.1.</strong>104<br />
Silent System for hinges<br />
Silent System for Intermat/Ecomat concealed hinges www.hettich.com
… closing doors the gentle way<br />
Quiet closure is a must-have quality in modern furniture.<br />
Instead of shutting with a loud bang, furniture doors today<br />
move to the closed position in virtual silence.<br />
Silent System technology gently slows the door down,<br />
closing it in slow motion.<br />
The comprehensive range provides the right solution for any<br />
application: conveniently clipping on, simply screw-mounting,<br />
fitting into a drill hole or elegantly fastening to the hinge cup.<br />
So easy to fit, they can, of course, also be added to existing<br />
applications.<br />
Precisely adjusted cushioned closure:<br />
On many options, the soft-closing action can be<br />
adjusted by means of a setting wheel – to suit personal<br />
preference as well as door size and weight.<br />
Silent System for hinges<br />
Silent System for Intermat/Ecomat concealed hinges <strong>3.1.</strong>105
<strong>3.1.</strong>106<br />
Range summary/Technical comparison<br />
Soft-close door buffer Silent System<br />
Page number<br />
Clip-on<br />
door buffer<br />
<strong>3.1.</strong>108<br />
Suitable for use on<br />
hinges from these ranges • Intermat<br />
Assembly Toolless snap-on<br />
mounting<br />
Mounting option • Overlay door<br />
• Inset door<br />
Adjustable<br />
soft-closing action<br />
Can be retrofitted<br />
Material Nickel-plated die-cast zinc<br />
✓<br />
✓<br />
Screw-on door buffer<br />
<strong>3.1.</strong>109<br />
• Intermat<br />
• Ecomat<br />
Screw-on mounting<br />
• Overlay door<br />
• Inset door<br />
✓<br />
✓<br />
Nickel-plated die-cast zinc<br />
Screw-on door buffer<br />
for hinge cup<br />
<strong>3.1.</strong>110<br />
• Intermat<br />
Screw-on mounting<br />
• Overlay door<br />
Silent System for Intermat/Ecomat concealed hinges www.hettich.com<br />
✓<br />
✓<br />
Nickel-plated die-cast zinc<br />
Clip-on door<br />
buffer<br />
<strong>3.1.</strong>112<br />
• Intermat<br />
• Ecomat<br />
Toolless snap-on<br />
mounting<br />
• Overlay door<br />
• Inset door<br />
✓<br />
✓<br />
Grey plastic<br />
i
Screw-on door buffer<br />
<strong>3.1.</strong>113<br />
• Intermat<br />
• Ecomat<br />
Screw-on mounting<br />
• Overlay door<br />
• Inset door<br />
✓<br />
✓<br />
i<br />
Grey plastic<br />
Drill-in door buffer<br />
<strong>3.1.</strong>114<br />
• Intermat<br />
• Ecomat<br />
Drill-in mounting<br />
• Overlay door<br />
–<br />
✓<br />
Grey plastic<br />
Universal<br />
drill-in door buffer<br />
<strong>3.1.</strong>116<br />
• Intermat<br />
• Ecomat<br />
• Slide-on<br />
• Minimat<br />
Drill-in mounting<br />
• Overlay door<br />
–<br />
✓<br />
Grey plastic<br />
Range summary/Technical comparison<br />
Soft-close door buffer Silent System<br />
Universal<br />
screw-on door buffer<br />
<strong>3.1.</strong>117<br />
• Intermat<br />
• Ecomat<br />
• Slide-on<br />
• Minimat<br />
Screw-on mounting<br />
• Overlay door<br />
–<br />
✓<br />
Grey plastic<br />
Universal<br />
screw-on door buffer<br />
<strong>3.1.</strong>118<br />
• Intermat<br />
• Ecomat<br />
• Slide-on<br />
• Minimat<br />
Screw-on mounting<br />
• Overlay door<br />
• Inset door<br />
Silent System for Intermat/Ecomat concealed hinges <strong>3.1.</strong>107<br />
–<br />
✓<br />
Grey plastic
<strong>3.1.</strong>108<br />
Clip-on door buffer Silent System<br />
for Intermat fast-assembly concealed hinges<br />
Nickel-plated die-cast zinc<br />
Assembly<br />
Disassembly<br />
• For overlay doors (cranking 0 and 9,5 mm) and<br />
for use with inset doors (cranking 16 mm)<br />
• Dampening effect infinitely adjustable at setting wheel<br />
• Toolless assembly and disassembly<br />
• Can be retrofitted<br />
Application for clip-on door buffer Silent System<br />
Clip-on door buffer<br />
Silent System<br />
0 060 576 0 060 577 0 060 578<br />
Hinge Cranking mm<br />
Intermat 9943 / 9943 FIX 0 9,5 16<br />
Intermat 9944 / 9944 FIX 0 9,5 –<br />
Intermat 9936 / 9936 FIX 0 9,5 16<br />
Article pairing:<br />
buffer Hinge, see page <strong>3.1.</strong>111<br />
Suitable for a cranking of mm Mounting option Order no. PU<br />
0,0 Overlay door 0 060 576 1/50<br />
9,5 Overlay door 0 060 577 1/50<br />
16,0 Inset door 0 060 578 1/50<br />
� � �<br />
� �<br />
Door heights up to<br />
2400<br />
2000<br />
Silent System for Intermat/Ecomat concealed hinges www.hettich.com<br />
1600<br />
900<br />
Door width up to 600 mm<br />
1<br />
Recommended number of buffers per door<br />
Guide values for 19 mm chipboard panels with<br />
a density of 750 kg/m3 1<br />
2<br />
2
1<br />
60<br />
Screw-on door buffer Silent System<br />
for Intermat/Ecomat fast-assembly concealed hinges<br />
Nickel-plated die-cast zinc<br />
• Suitable for overlay and inset doors<br />
• Mounted on hinge side<br />
• Simply screw-mounts to top or bottom cabinet panel<br />
• Dampening effect infinitely adjustable at setting wheel<br />
• Can be retrofitted<br />
Application for screw-on door buffer Silent System<br />
Door buffer for overlay door Door buffer for inset door<br />
20<br />
23<br />
20<br />
5<br />
1<br />
60<br />
10<br />
X<br />
20<br />
32<br />
24<br />
Formula for calculating dimension X<br />
Dimension X = Z + distance of mounting plate + Hinge cranking<br />
Hinge Door width mm Z mm<br />
Intermat 9943 up to 300 10<br />
Ecomat 9843<br />
Intermat 9944<br />
Intermat 9936/9936 W20-W90<br />
up to 450<br />
up to 600<br />
18<br />
24<br />
Intermat 9956 up to 300 26<br />
up to 450 34<br />
up to 600 40<br />
Screw-on door buffer<br />
Silent System 0 060 579 0 060 579 0 060 580<br />
Hinge Cranking mm<br />
Intermat 9943/9943 FIX 0 9,5 16<br />
Ecomat 9843/9843 FIX 0 9,5 16<br />
Intermat 9944/9944 FIX 0 9,5 –<br />
Intermat 9956/9956 FIX 0 9,5 –<br />
Intermat 9936/9936 FIX 0 9,5 16<br />
Intermat 9936 W20/W20 FIX 7 – – 9<br />
Intermat 9936 W30/W30 FIX 7 – –10<br />
Intermat 9936 W45/W45 FIX 0 6,0 –17<br />
Intermat 9936 W90/W90 FIX 5 – –<br />
Article pairing: buffer Hinge, see page <strong>3.1.</strong>111<br />
Mounting option Order no. PU<br />
Overlay door 0 060 579 1/50 sets<br />
Inset door 0 060 580 1/50 sets<br />
5<br />
61<br />
10<br />
Y<br />
X<br />
Y = Door thickness +1<br />
21<br />
32<br />
Assembly<br />
24<br />
60<br />
23<br />
Door heights up to<br />
2400<br />
2000<br />
1600<br />
900<br />
Door width up to 600 mm<br />
Silent System for Intermat/Ecomat concealed hinges <strong>3.1.</strong>109<br />
1<br />
Recommended number of buffers<br />
per door<br />
Guide values for 19 mm chipboard<br />
panels with a density of 750 kg/m3 � � �<br />
1<br />
2<br />
2
<strong>3.1.</strong>110<br />
Hinge cup screw-on door buffer Silent System<br />
for Intermat fast-assembly concealed hinges<br />
Nickel-plated die-cast zinc<br />
Assembly<br />
• Suitable for overlay mounted doors (corner mounting, 0 mm cranking)<br />
• Simply screw-mounts to the hinge cup<br />
• Dampening effect infinitely adjustable at setting wheel<br />
• Can be retrofitted<br />
Application for<br />
hinge cup screw-on door buffer Silent System<br />
Hinge cup screw-on<br />
door buffer Silent System<br />
0 060 581<br />
Hinge Cranking Cup<br />
mm version<br />
Intermat 9943 0 T42/T43<br />
Intermat 9944 0 T42/T43<br />
Intermat 9936 0 T42/T43<br />
Article pairing:<br />
buffer Hinge, see page <strong>3.1.</strong>111<br />
Order no. PU<br />
0 060 581 1/50<br />
� � �<br />
�<br />
Door heights up to<br />
2400<br />
2000<br />
Silent System for Intermat/Ecomat concealed hinges www.hettich.com<br />
1600<br />
900<br />
Door width up to 600 mm<br />
1<br />
Recommended number of buffers per door<br />
Guide values for 19 mm chipboard panels with<br />
a density of 750 kg/m3 1<br />
2<br />
2
Clip-on<br />
door buffer<br />
Screw-on<br />
door buffer<br />
Hinge cup screw-on<br />
door buffer<br />
0 060 576 0 060 577 0 060 578 0 060 579 0 060 580 0 060 581<br />
Intermat T42/K0 T42/K9,5 T42/K16 T42/K0 T42/K16 T42/K0<br />
9943 0 048049 0 048051 0 048052 0 048049 0 048052 0 048049<br />
T43/K0 T43/K9,5 T43/K16 T43/K0 T43/K16 T43/K0<br />
0 048053 0 048054 0 048055 0 048053 0 048055 0 048053<br />
TB43/K0 TB43/K9,5 TB43/K16 TB43/K0 TB43/K16<br />
0 048056 0 048057 0 048058 0 048056 0 048058<br />
TFlash/K0 TFlash/K9,5 TFlash/K16 TFlash/K0 TFlash/K16<br />
0 048059 0 048061 0 048062 0 048059 0 048062<br />
TFix/K0 TFix/K9,5 TFix/K16 TFix/K0 TFix/K16<br />
0 048063 0 048064 0 048065 0 048063 0 048065<br />
THFix/K0 THFix/K9,5 THFix/K16 THFix/K0 THFix/K16<br />
0 048066 0 048068 0 048069 0 048066 0 048069<br />
TBFix/K0 TBFix/K9,5 TBFix/K16 TBFix/K0 TBFix/K16<br />
0 048071 0 048072 0 048073 0 048071 0 048073<br />
T42/K9,5<br />
0 048051<br />
T43/K9,5<br />
0 048054<br />
TB43/K9,5<br />
0 048057<br />
TFlash/K9,5<br />
0 048061<br />
TFix/K9,5<br />
0 048064<br />
THFix/K9,5<br />
0 048068<br />
TBFix/K9,5<br />
0 048072<br />
Intermat T42/K0 T42/K9,5 T42/K0 T42/K0<br />
9944 0 073905 0 073909 0 073905 0 073905<br />
T43/K0 T43/K9,5 T43/K0 T43/K0<br />
0 073906 0 073910 0 073906 0 073906<br />
TB43/K0 TB43/K9,5 TB43/K0<br />
0 073907 0 073911 0 073907<br />
TFlash/K0 TFlash/K9,5 TFlash/K0<br />
0 073908 0 073912 0 073908<br />
TFix/K0 TFix/K9,5 TFix/K0<br />
0 077647 0 077650 0 077647<br />
THFix/K0 THFix/K9,5 THFix/K0<br />
0 077648 0 077651 0 077648<br />
TBFix/K0 TBFix/K9,5 TBFix/K0<br />
0 077649 0 077652 0 077649<br />
T42/K9,5<br />
0 073909<br />
T43/K9,5<br />
0 073910<br />
TB43/K9,5<br />
0 073911<br />
TFlash/K9,5<br />
0 073 912<br />
TFix/K9,5<br />
0 077650<br />
THFix/K9,5<br />
0 077651<br />
TBFix/K9,5<br />
0 077652<br />
Intermat T42/K0 T42/K9,5 T42/K16 T42/K0 T42/K16 T42/K0<br />
9936 0 073913 0 073917 0 073921 0 073913 0 073921 0 073913<br />
T43/K0 T43/K9,5 T43/K16 T43/K0 T43/K16 T43/K0<br />
0 073914 0 073918 0 073922 0 073914 0 073922 0 073914<br />
TB43/K0 TB43/K9,5 TB43/K16 TB43/K0 TB43/K16<br />
0 073915 0 073919 0 073923 0 073915 0 073923<br />
TFlash/K0 TFlash/K9,5 TFlash/K16 TFlash/K0 TFlash/K16<br />
0 073916 0 073920 0 073924 0 073916 0 073924<br />
TFix/K0 TFix/K9,5 TFix/K16 TFix/K0 TFix/K16<br />
0 077671 0 077674 0 077677 0 077671 0 077677<br />
THFix/K0 THFix/K9,5 THFix/K16 THFix/K0 THFix/K16<br />
0 077672 0 077675 0 077678 0 077672 0 077678<br />
TBFix/K0 TBFix/K9,5 TBFix/K16 TBFix/K0 TBFix/K16<br />
0 077673 0 077676 0 077679 0 077673 0 077679<br />
T42/K9,5<br />
0 073917<br />
T43/K9,5<br />
0 073918<br />
TB43/K9,5<br />
0 073919<br />
TFlash/K9,5<br />
0 073920<br />
TFix/K9,5<br />
0 077674<br />
THFix/K9,5<br />
0 077675<br />
TBFix/K9,5<br />
0 077676<br />
Applications for door buffers Silent System<br />
with Intermat/Ecomat hinges<br />
K = Cranking<br />
Screw-on<br />
door buffer<br />
0 060 579 0 060 580<br />
Intermat T42/K0<br />
9956 0 072947<br />
T43/K0<br />
0 072948<br />
TB43/K0<br />
0 072949<br />
TFlash/K0<br />
0 072124<br />
TFix/K0<br />
0 077659<br />
THFix/K0<br />
0 077660<br />
TBFix/K0<br />
0 077661<br />
T42/K9,5<br />
0 072961<br />
T43/K9,5<br />
0 072962<br />
TB43/K9,5<br />
0 072963<br />
TFlash/K9,5<br />
0 072964<br />
TFix/K9,5<br />
0 077665<br />
THFix/K9,5<br />
0 077 666<br />
TBFix/K9,5<br />
0 077 667<br />
Ecomat T42/K0 T42/K16<br />
9843 0 079258 0 079260<br />
1 072 954 1 072 956<br />
T43/K0 T43/K16<br />
0 079261 0 079263<br />
1 072 957 1 072 959<br />
TB43/K0 TB43/K16<br />
0 079042 0 079044<br />
1 072 960 –<br />
TFlash/K0 TFlash/K16<br />
0 070018 0 070020<br />
1 077 678 –<br />
TFix/K0 TFix/K16<br />
0 079045 0 079047<br />
1 073 350 –<br />
THFix/K0 THFix/K16<br />
0 079048 0 079050<br />
1 073 347 1 073 349<br />
TBFix/K0 TBFix/K16<br />
0 079051 0 079053<br />
1 073 353<br />
T42/K9,5<br />
0 079259<br />
1 072 955<br />
T43/K9,5<br />
0 079262<br />
1 072 958<br />
TB43/K9,5<br />
0 079043<br />
–<br />
TFlash/K9,5<br />
0 070019<br />
–<br />
TFix/K9,5<br />
0 079046<br />
–<br />
THFix/K9,5<br />
0 079049<br />
1 073 348<br />
TBFix/K9,5<br />
0 079052<br />
–<br />
–<br />
Screw-on<br />
door buffer<br />
0 060 579 0 060 580<br />
Intermat T42/K7 T42/K-9<br />
9936 W20 0 077 644 0 077 645<br />
T43/K7 T43/K-9<br />
0 077 680 0 077 682<br />
TB43/K7 TB43/K-9<br />
0 077 681 0 077 683<br />
THFix/K7 THFix/K-9<br />
0 077685 0 077688<br />
TBFix/K7 TBFix/K-9<br />
0 077686 0 077689<br />
Intermat T42/K7 T42/K-10<br />
9936 W30 0 077 690 0 073928<br />
T43/K7 T43/K-10<br />
0 077 691 0 073929<br />
TB43/K7 TB43/K-10<br />
0 077 692 0 073930<br />
THFix/K7 THFix/K-10<br />
0 077694 0 077697<br />
TBFix/K7 TBFix/K-10<br />
0 077695 0 077698<br />
Intermat T42/K0 T42/K-17<br />
9936 W45 0 048 096 0 073932<br />
T43/K0 T43/K-17<br />
0 048 097 0 073933<br />
TB43/K0 TB43/K-17<br />
0 048 098 0 073934<br />
THFix/K0 THFix/K-17<br />
0 048 103 0 077706<br />
TBFix/K0 TBFix/K-17<br />
0 048 104 0 077707<br />
T42/K6<br />
0 077699<br />
T43/K6<br />
0 077700<br />
TB43/K6<br />
0 077701<br />
THFix/K6<br />
0 077703<br />
TBFix/K6<br />
0 077704<br />
Intermat T42/K5<br />
9936 W90 0 077 708<br />
T43/K5<br />
0 077 709<br />
TB43/K5<br />
0 077 710<br />
THFix/K5<br />
0 077712<br />
TBFix/K5<br />
0 077713<br />
Silent System for Intermat/Ecomat concealed hinges <strong>3.1.</strong>111
<strong>3.1.</strong>112<br />
Clip-on door buffer Silent System<br />
for Intermat/Ecomat fast-assembly concealed hinges<br />
Grey plastic<br />
Assembly<br />
Disassembly<br />
• For overlay doors (cranking 0 and 9,5 mm) and<br />
for use with inset doors (cranking 16 mm)<br />
• Dampening effect infinitely adjustable at setting wheel<br />
• Toolless assembly and disassembly<br />
• Can be retrofitted<br />
Application for clip-on door buffer Silent System<br />
Clip-on door buffer<br />
Silent System<br />
Intermat 0 048 044 0 048 045 0 048 046<br />
Ecomat 0 045 337 0 045 338 0 045 339<br />
Hinge Cranking mm<br />
Intermat 9943 / 9943 FIX 0 9,5 16<br />
Ecomat 9843 / 9843 FIX 0 9,5 16<br />
Intermat 9944 / 9944 FIX 0 9,5 –<br />
Intermat 9936 / 9936 FIX 0 9,5 16<br />
Suitable for a cranking of mm Mounting option Order no. PU<br />
Intermat Ecomat<br />
0,0 Overlay door 0 048 044 0 045 337 1/50<br />
9,5 Overlay door 0 048 045 0 045 338 1/50<br />
16,0 Inset door 0 048 046 0 045 339 1/50<br />
� �<br />
Article pairing:<br />
buffer Hinge, see page <strong>3.1.</strong>115<br />
Door heights up to<br />
2400<br />
2000<br />
Silent System for Intermat/Ecomat concealed hinges www.hettich.com<br />
1600<br />
900<br />
Door width up to 600 mm<br />
1<br />
1<br />
2<br />
2/3<br />
Recommended number of buffers per door<br />
Guide values for 19 mm chipboard panels with<br />
a density of 750 kg/m3
Door buffer for overlay door<br />
14,5<br />
34<br />
17<br />
Door buffer for inset door<br />
X<br />
0,9<br />
min.<br />
69<br />
max.<br />
75<br />
Dimension X = distance of mounting plate + hinge cranking<br />
14,5<br />
34<br />
17<br />
X<br />
min.<br />
69<br />
max.<br />
75<br />
Y<br />
20<br />
7<br />
X<br />
10<br />
Chipboard screw<br />
ø 4 x 17 mm<br />
20<br />
7 X<br />
Screw-on door buffer Silent System<br />
for Intermat/Ecomat fast-assembly concealed hinges<br />
Grey plastic<br />
• Suitable for overlay and inset doors<br />
• Mounted on hinge side<br />
• Simply screw-mounts to top or bottom cabinet panel<br />
• Dampening effect infinitely adjustable at setting wheel<br />
• Can be retrofitted<br />
Application for screw-on door buffer Silent System<br />
Screw-on door buffer<br />
Silent System<br />
0 042 001 0 042 001 0 048 048<br />
Hinge Cranking mm<br />
Intermat 9943/9943 FIX 0 9,5 16<br />
Ecomat 9843/9843 FIX 0 9,5 16<br />
Intermat 9944/9944 FIX 0 9,5 –<br />
Intermat 9956/9956 FIX 0 9,5 –<br />
Intermat 9936/9936 FIX 0 9,5 16<br />
Intermat 9936 W20/W20 FIX 7 – – 9<br />
Intermat 9936 W30/W30 FIX 7 – –10<br />
Intermat 9936 W45/W45 FIX 0 6,0 –17<br />
Intermat 9936 W90/W90 FIX 5 – –<br />
Article pairing: buffer Hinge, see page <strong>3.1.</strong>115<br />
Mounting option Order no. PU<br />
Overlay door 0 042 001 1/50<br />
Inset door 0 048 048 1/50<br />
Chipboard screw<br />
ø 4 x 17 mm<br />
Dimension X = distance of mounting plate + hinge cranking / Dimension Y = door thickness + 11<br />
Assembly<br />
Door heights up to<br />
2400<br />
2000<br />
1600<br />
900<br />
Door width up to 600 mm<br />
1<br />
2/3<br />
Recommended number of buffers per door<br />
Guide values for 19 mm chipboard panels with<br />
a density of 750 kg/m3 Silent System forIntermat/Ecomat concealed hinges <strong>3.1.</strong>113<br />
1<br />
2
<strong>3.1.</strong>114<br />
Drill-in door buffer Silent System<br />
for Intermat/Ecomat fast-assembly concealed hinges<br />
Grey plastic<br />
Assembly<br />
Z<br />
ø 10<br />
Dimension Z = 17 + distance from mounting plate + hinge cranking<br />
0,9<br />
50<br />
• Suitable for overlay mounted doors<br />
(corner mounting, 0 mm and 9,5 mm cranking)<br />
• Mounted on hinge side<br />
• To fit, simply insert into a 10 mm dia. hole<br />
• Can be retrofitted<br />
Application for<br />
drill-in door buffer Silent System<br />
Drill-in door buffer<br />
Silent System<br />
Hinge<br />
0 048 047<br />
Cranking<br />
mm<br />
Intermat 9943/9943 FIX 0 9,5<br />
Ecomat 9843/9843 FIX 0 9,5<br />
Intermat 9944/9944 FIX 0 9,5<br />
Intermat 9956/9956 FIX 0 9,5<br />
Intermat 9936/9936 FIX 0 9,5<br />
Intermat 9936 W20/W20 FIX 7 9,0<br />
Intermat 9936 W30/W30 FIX 7 10,0<br />
Intermat 9936 W45/W45 FIX 0 6,0<br />
Intermat 9936 W90/W90 FIX 5 -<br />
Intermat 9944 Alu 0 9,5<br />
Article pairing:<br />
buffer Hinge, see page <strong>3.1.</strong>115<br />
Order no. PU<br />
0 048 047 1/50<br />
Door heights up to<br />
2400<br />
2000<br />
Silent System for Intermat/Ecomat concealed hinges www.hettich.com<br />
1600<br />
900<br />
Door width up to 600 mm<br />
1<br />
1<br />
2<br />
2/3<br />
Recommended number of buffers per door<br />
Guide values for 19 mm chipboard panels with<br />
a density of 750 kg/m3
K = Cranking<br />
0 048 044 0 048 045 0 048 046 0 042 001 0 048 048 0 048 047<br />
Intermat T42/K0 T42/K9,5 T42/K16 T42/K0 T42/K16 T42/K0<br />
9943 0 048049 0 048051 0 048052 0 048049 0 048052 0 048049<br />
T43/K0 T43/K9,5 T43/K16 T43/K0 T43/K16 T43/K0<br />
0 048053 0 048054 0 048055 0 048053 0 048055 0 048053<br />
TB43/K0 TB43/K9,5 TB43/K16 TB43/K0 TB43/K16 TB43/K0<br />
0 048056 0 048057 0 048058 0 048056 0 048058 0 048056<br />
TFlash/K0 TFlash/K9,5 TFlash/K16 TFlash/K0 TFlash/K16 TFlash/K0<br />
0 048059 0 048061 0 048062 0 048059 0 048062 0 048059<br />
TFix/K0 TFix/K9,5 TFix/K16 TFix/K0 TFix/K16 TFix/K0<br />
0 048063 0 048064 0 048065 0 048063 0 048065 0 048063<br />
THFix/K0 THFix/K9,5 THFix/K16 THFix/K0 THFix/K16 THFix/K0<br />
0 048066 0 048068 0 048069 0 048066 0 048069 0 048066<br />
TBFix/K0 TBFix/K9,5 TBFix/K16 TBFix/K0 TBFix/K16 TBFix/K0<br />
0 048071 0 048072 0 048073 0 048071 0 048073 0 048071<br />
T42/K9,5 T42/K9,5<br />
0 048051 0 048051<br />
T43/K9,5 T43/K9,5<br />
0 048054 0 048054<br />
TB43/K9,5 TB43/K9,5<br />
0 048057 0 048057<br />
TFlash/K9,5 TFlash/K9,5<br />
0 048061 0 048061<br />
TFix/K9,5 TFix/K9,5<br />
0 048064 0 048064<br />
THFix/K9,5 THFix/K9,5<br />
0 048068 0 048068<br />
TBFix/K9,5 TBFix/K9,5<br />
0 048072 0 048072<br />
Intermat T42/K0 T42/K9,5 T42/K0 T42/K0<br />
9944 0 073905 0 073909 0 073905 0 073905<br />
T43/K0 T43/K9,5 T43/K0 T43/K0<br />
0 073906 0 073910 0 073906 0 073906<br />
TB43/K0 TB43/K9,5 TB43/K0 TB43/K0<br />
0 073907 0 073911 0 073907 0 073907<br />
TFlash/K0 TFlash/K9,5 TFlash/K0 TFlash/K0<br />
0 073908 0 073912 0 073908 0 073908<br />
TFix/K0 TFix/K9,5 TFix/K0 TFix/K0<br />
0 077647 0 077650 0 077647 0 077647<br />
THFix/K0 THFix/K9,5 THFix/K0 THFix/K0<br />
0 077648 0 077651 0 077648 0 077648<br />
TBFix/K0 TBFix/K9,5 TBFix/K0 TBFix/K0<br />
0 077649 0 077652 0 077649 0 077649<br />
T42/K9,5 T42/K9,5<br />
0 073909 0 073909<br />
T43/K9,5 T43/K9,5<br />
0 073910 0 073910<br />
TB43/K9,5 TB43/K9,5<br />
0 073911 0 073911<br />
TFlash/K9,5 TFlash/K9,5<br />
0 073 912 0 073 912<br />
Intermat T42/K0 T42/K9,5 T42/K16 T42/K0 T42/K16 T42/K0<br />
9936 0 073913 0 073917 0 073921 0 073913 0 073921 0 073913<br />
T43/K0 T43/K9,5 T43/K16 T43/K0 T43/K16 T43/K0<br />
0 073914 0 073918 0 073922 0 073914 0 073922 0 073914<br />
TB43/K0 TB43/K9,5 TB43/K16 TB43/K0 TB43/K16 TB43/K0<br />
0 073915 0 073919 0 073923 0 073915 0 073923 0 073915<br />
TFlash/K0 TFlash/K9,5 TFlash/K16 TFlash/K0 TFlash/K16 TFlash/K0<br />
0 073916 0 073920 0 073924 0 073916 0 073924 0 073916<br />
TFix/K0 TFix/K9,5 TFix/K16 TFix/K0 TFix/K16 TFix/K0<br />
0 077671 0 077674 0 077677 0 077671 0 077677 0 077671<br />
THFix/K0 THFix/K9,5 THFix/K16 THFix/K0 THFix/K16 THFix/K0<br />
0 077672 0 077675 0 077678 0 077672 0 077678 0 077672<br />
TBFix/K0 TBFix/K9,5 TBFix/K16 TBFix/K0 TBFix/K16 TBFix/K0<br />
0 077673 0 077676 0 077679 0 077673 0 077679 0 077673<br />
T42/K9,5 T42/K9,5<br />
0 073917 0 073917<br />
Screw-on<br />
door buffer<br />
Clip-on<br />
door buffer<br />
Drill-in<br />
door buffer<br />
0 042 001 0 048 047<br />
Intermat T42/K0 T42/K0<br />
9956 0 072947 0 072947<br />
T43/K0 T43/K0<br />
0 072948 0 072948<br />
TB43/K0 TB43/K0<br />
0 072949 0 072949<br />
TFlash/K0 TFlash/K0<br />
0 072124 0 072124<br />
TFix/K0 TFix/K0<br />
0 077659 0 077659<br />
THFix/K0 THFix/K0<br />
0 077660 0 077660<br />
TBFix/K0 TBFix/K0<br />
0 077661 0 077661<br />
T42/K9,5 T42/K9,5<br />
0 072961 0 072961<br />
T43/K9,5 T43/K9,5<br />
0 072962 0 072962<br />
TB43/K9,5 TB43/K9,5<br />
0 072963 0 072963<br />
TFlash/K9,5 TFlash/K9,5<br />
0 072964 0 072964<br />
TFix/K9,5 TFix/K9,5<br />
0 077665 0 077665<br />
THFix/K9,5 THFix/K9,5<br />
0 077 666 0 077 666<br />
TBFix/K9,5 TBFix/K9,5<br />
0 077 667 0 077 667<br />
Intermat T1/K0<br />
9944 Alu 0 020 169<br />
T1/K9,5<br />
0 020 170<br />
Screw-on<br />
door buffer<br />
Drill-in<br />
door buffer<br />
Screw-on<br />
door buffer<br />
0 042 001 0 048 048 0 048 047<br />
Intermat T42/K7 T42/K-9 T42/K7<br />
9936 W20 0 077 644 0 077 645 0 077 644<br />
T43/K7 T43/K-9 T43/K7<br />
0 077 680 0 077 682 0 077 680<br />
TB43/K7 TB43/K-9 TB43/K7<br />
0 077 681 0 077 683 0 077 681<br />
THFix/K7 THFix/K-9 THFix/K7<br />
0 077685 0 077688 0 077685<br />
TBFix/K7 TBFix/K-9 TBFix/K7<br />
0 077686 0 077689 0 077686<br />
Intermat T42/K7 T42/K-10 T42/K7<br />
9936 W30 0 077 690 0 073928 0 077 690<br />
T43/K7 T43/K-10 T43/K7<br />
0 077 691 0 073929 0 077 691<br />
TB43/K7 TB43/K-10 TB43/K7<br />
0 077 692 0 073930 0 077 692<br />
THFix/K7 THFix/K-10 THFix/K7<br />
0 077694 0 077697 0 077694<br />
TBFix/K7 TBFix/K-10 TBFix/K7<br />
0 077695 0 077698 0 077695<br />
Intermat T42/K0 T42/K-17 T42/K0<br />
9936 W45 0 048 096 0 073932 0 048 096<br />
T43/K0 T43/K-17 T43/K0<br />
0 048 097 0 073933 0 048 097<br />
TB43/K0 TB43/K-17 TB43/K0<br />
0 048 098 0 073934 0 048 098<br />
Applications for door buffers Silent System<br />
with Intermat/Ecomat hinges<br />
Clip-on<br />
door buffer<br />
0 048 044 0 048 045 0 048 046 0 042 001 0 048 048 0 048 047<br />
Intermat T43/K9,5 T43/K9,5<br />
9936 0 073918 0 073918<br />
TB43/K9,5 TB43/K9,5<br />
0 073919 0 073919<br />
TFlash/K9,5 TFlash/K9,5<br />
0 073920 0 073920<br />
TFix/K9,5 TFix/K9,5<br />
0 077674 0 077674<br />
THFix/K9,5 THFix/K9,5<br />
0 077675 0 077675<br />
TBFix/K9,5 TBFix/K9,5<br />
0 077676 0 077676<br />
Clip-on<br />
door buffer<br />
Screw-on<br />
door buffer<br />
Screw-on<br />
door buffer<br />
Drill-in<br />
door buffer<br />
Drill-in<br />
door buffer<br />
0 045 337 0 045 338 0 045 339 0 042 001 0 048 048 0 048 047<br />
Ecomat T42/K0 T42/K9,5 T42/K16 T42/K0 T42/K16 T42/K0<br />
9843 0 079258 0 079259 0 079260 0 079 258 0 079260 0 079258<br />
1 072 954 1 072 955 1 072 956 1 072 954 1 072 956 1 072 954<br />
T43/K0 T43/K9,5 T43/K16 T43/K0 T43/K16 T43/K0<br />
0 079261 0 079262 0 079263 0 079 261 0 079263 0 079261<br />
1 072 957 1 072 958 1 072 959 1 072 957 1 072 959 1 072 957<br />
TB43/K0 TB43/K9,5 TB43/K16 TB43/K0 TB43/K16 TB43/K0<br />
0 079042 0 079043 0 079044 0 079 042 0 079044 0 079042<br />
1 072 960 – – 1 072 960 – 1 072 960<br />
TFlash/K0 TFlash/K9,5 TFlash/K16 TFlash/K0 TFlash/K16 TFlash/K0<br />
0 070018 0 070019 0 070020 0 070 018 0 070020 0 070018<br />
1 077 678 – – 1 077 678 – 1 077 678<br />
TFix/K0 TFix/K9,5 TFix/K16 TFix/K0 TFix/K16 TFix/K0<br />
0 079045 0 079046 0 079047 0 079045 0 079047 0 079045<br />
1 073 350 – – 1 073 350 – 1 073 350<br />
THFix/K0 THFix/K9,5 THFix/K16 THFix/K0 THFix/K16 THFix/K0<br />
0 079048 0 079049 0 079050 0 079 048 0 079050 0 079048<br />
1 073 347 1 073 348 1 073 349 1 073 347 1 073 349 1 073 347<br />
TBFix/K0 TBFix/K9,5 TBFix/K16 TBFix/K0 TBFix/K16 TBFix/K0<br />
0 079051 0 079052 0 079053 0 079 051 0 079053 0 079051<br />
1 073 353 – – 1 073 353 – 1 073 353<br />
T42/K9,5 T42/K9,5<br />
0 079 259 0 079259<br />
1 072 955 1 072 955<br />
T43/K9,5 T43/K9,5<br />
0 079 262 0 079262<br />
1 072 958 1 072 958<br />
TB43/K9,5 TB43/K9,5<br />
0 079 043 0 079043<br />
– –<br />
TFlash/K9,5 TFlash/K9,5<br />
0 070 019 0 070019<br />
– –<br />
TFix/K9,5 TFix/K9,5<br />
0 079 046 0 079 046<br />
– –<br />
THFix/K9,5 THFix/K9,5<br />
0 079 049 0 079 049<br />
1 073 348 1 073 348<br />
TBFix/K9,5 TBFix/K9,5<br />
0 079 052 0 079 052<br />
– –<br />
Drill-in<br />
door buffer<br />
Screw-on<br />
door buffer<br />
Drill-in<br />
door buffer<br />
0 042 001 0 048 048 0 048 047<br />
Intermat THFix/K0 THFix/K-17 THFix/K0<br />
9936 W45 0 048 103 0 077706 0 048 103<br />
TBFix/K0 TBFix/K-17 TBFix/K0<br />
0 048 104 0 077707 0 048 104<br />
T42/K6 T42/K6<br />
0 077699 0 077699<br />
T43/K6 T43/K6<br />
0 077700 0 077700<br />
TB43/K6 TB43/K6<br />
0 077701 0 077701<br />
THFix/K6 THFix/K6<br />
0 077703 0 077703<br />
TBFix/K6 TBFix/K6<br />
0 077704 0 077704<br />
Intermat T42/K5 T42/K5<br />
9936 W90 0 077 708 0 077 708<br />
T43/K5 T43/K5<br />
0 077 709 0 077 709<br />
TB43/K5 TB43/K5<br />
0 077 710 0 077 710<br />
THFix/K5 THFix/K5<br />
0 077712 0 077712<br />
TBFix/K5 TBFix/K5<br />
0 077713 0 077713<br />
Silent System for Intermat/Ecomat concealed hinges <strong>3.1.</strong>115
<strong>3.1.</strong>116<br />
Universal drill-in door buffer Silent System<br />
for concealed hinges<br />
Grey plastic<br />
Application for universal drill-in door buffer Silent System<br />
Assembly<br />
0,9<br />
52<br />
ø 10<br />
• For overlay doors<br />
• Can be used with concealed hinges<br />
• Can be retrofitted<br />
Order no. PU<br />
0 060 685 1/50<br />
Intermat Ecomat Slide-on Minimat<br />
Recommended number of buffers per door<br />
Guide values for 19 mm chipboard panels with<br />
a density of 750 kg/m3 Door heights up to<br />
2400<br />
2000<br />
Silent System for Intermat/Ecomat/Slide-on/Minimat concealed hinges www.hettich.com<br />
1600<br />
900<br />
Door width up to 600 mm<br />
1<br />
2<br />
2<br />
2
Application for universal screw-on door buffer Silent System<br />
Assembly<br />
53<br />
47<br />
32<br />
ø4<br />
12<br />
13,5<br />
Universal screw-on door buffer Silent System<br />
for concealed hinges<br />
Grey plastic<br />
• For overlay doors<br />
• Can be used with concealed hinges<br />
• Simply screws to top carcase panel<br />
• Can be retrofitted<br />
Order no. PU<br />
0 060 687 1/50<br />
Intermat Ecomat Slide-on Minimat<br />
Recommended number of buffers per door<br />
Guide values for 19 mm chipboard panels with<br />
a density of 750 kg/m3 Door heights up to<br />
2400<br />
2000<br />
1600<br />
900<br />
Door width up to 600 mm<br />
Silent System for Intermat/Ecomat/Slide-on/Minimat concealed hinges <strong>3.1.</strong>117<br />
1<br />
2<br />
2<br />
2
<strong>3.1.</strong>118<br />
Universal screw-on door buffer Silent System<br />
for concealed hinges<br />
Grey plastic<br />
Application for Silent System universal screw-on door buffer<br />
Assembly<br />
Overlay door Inset door<br />
0,9<br />
53<br />
13<br />
ø4<br />
19<br />
22<br />
• For overlay and inset doors<br />
• Can be used with concealed hinges<br />
• Simply screws to top carcase panel<br />
• Can be retrofitted<br />
54<br />
Mounting option Order no. PU<br />
Overlay door 0 060 686 1/50<br />
Inset door 0 069 846 1/50<br />
Intermat Ecomat Slide-on Minimat<br />
13<br />
ø4<br />
20<br />
22<br />
Door width up to 600 mm<br />
Door heights up to<br />
2400<br />
2000<br />
1600<br />
900<br />
Silent System for Intermat/Ecomat/Slide-on/Minimat concealed hinges www.hettich.com<br />
1<br />
Recommended number of buffers<br />
per door<br />
Guide values for 19 mm chipboard panels<br />
with a density of 750 kg/m 3<br />
1<br />
2<br />
2
Designing without handles<br />
New design language – sleek, unadorned furniture fronts<br />
are seen as the ultimate in modern furnishing concepts.<br />
Helping to create these sleek lines is the handleless front<br />
which is increasingly dominating the top segment.<br />
More of a geometric room sculpture than furniture - this is<br />
the design formula. It's exquisite woods, steel and lacquer<br />
that make a statement on the outside.<br />
Concealed within, the hardware functions as an "open Sesame".<br />
Door opening system Push-To-Open<br />
for handleless furniture doors<br />
Push-To-Open for handleless furniture doors <strong>3.1.</strong>119<br />
Push-To-Open
<strong>3.1.</strong>120<br />
Range summary/Technical comparison<br />
Door opening system Push-To-Open<br />
for handleless furniture doors<br />
Page number<br />
P2O Magnet<br />
<strong>3.1.</strong>122<br />
Suitable for use on hinges<br />
from these ranges • Intermat P 2 O<br />
Assembly • Drill-in mounting<br />
Mounting option • Overlay door<br />
Door height mm 300 - 900<br />
Door width mm<br />
300 - 600<br />
Material Plastic, self-colour<br />
Screw-on adapter<br />
for P2O Magnet<br />
<strong>3.1.</strong>123<br />
• Intermat P 2 O<br />
• Screw-on mounting<br />
• Overlay door<br />
300 - 900<br />
300 - 600<br />
Grey plastic<br />
Linear<br />
screw-on adapter<br />
for P2O Magnet<br />
<strong>3.1.</strong>124<br />
• Intermat P 2 O<br />
• Screw-on mounting<br />
• Overlay door<br />
• Inset door<br />
300 - 900<br />
300 - 600<br />
Grey plastic<br />
P2O Magnet XL<br />
<strong>3.1.</strong>125<br />
• Intermat P 2 O<br />
• Screw-on mounting<br />
• Overlay door<br />
900 - 1600<br />
300 - 600<br />
Grey plastic<br />
Push-To-Open for handleless furniture doors www.hettich.com<br />
Push-To-Open<br />
i
i<br />
P2O Magnet XL<br />
Linear<br />
<strong>3.1.</strong>126<br />
• Intermat P 2 O<br />
• Screw-on mounting<br />
• Overlay door<br />
• Inset door<br />
900 - 1600<br />
300 - 600<br />
Grey plastic<br />
Push-To-Open<br />
P2O Pin<br />
<strong>3.1.</strong>127<br />
• Intermat P 2 O<br />
• Screw-on mounting<br />
• Overlay door<br />
300 - 2400<br />
300 - 600<br />
Grey plastic<br />
P2O Universal mini<br />
<strong>3.1.</strong>128<br />
• Intermat<br />
• Ecomat<br />
• Slide-on<br />
• Minimat<br />
• Perfekt<br />
• Drill-in mounting<br />
• Overlay door<br />
300 - 1600<br />
300 - 600<br />
Grey plastic<br />
Range summary/Technical comparison<br />
Door opening system Push-To-Open<br />
for handleless furniture doors<br />
Linear<br />
screw-on adapter for<br />
P2O Universal mini<br />
<strong>3.1.</strong>128<br />
• Intermat<br />
• Ecomat<br />
• Slide-on<br />
• Minimat<br />
• Perfekt<br />
• Screw-on mounting<br />
• Overlay door<br />
• Inset door<br />
300 - 1600<br />
300 - 600<br />
Grey plastic<br />
P2O Universal maxi<br />
<strong>3.1.</strong>129<br />
• Intermat<br />
• Ecomat<br />
• Slide-on<br />
• Minimat<br />
• Perfekt<br />
• Screw-on mounting<br />
• Overlay door<br />
• Inset door<br />
300 - 2400<br />
300 - 600<br />
Grey plastic<br />
Push-To-Open for handleless furniture doors <strong>3.1.</strong>121
<strong>3.1.</strong>122<br />
Push-To-Open for handleless furniture doors<br />
P 2 O Magnet<br />
Assembly<br />
ø10<br />
16 1<br />
8<br />
Counterplate with socket<br />
• For surfaces permitting<br />
insufficient adhesion<br />
(e.g. oiled or waxed wood)<br />
Order no. PU<br />
0 045 550 1/25<br />
� �<br />
10<br />
• Door-opening system for handleless furniture doors<br />
• For drilling into overlay doors<br />
• Can only be used in conjunction with Intermat P 2O fast-assembly hinges<br />
(see pages <strong>3.1.</strong>130 - <strong>3.1.</strong>142)<br />
• For door widths of 300 - 600 mm and door heights of 300 - 900 mm<br />
• Includes self-adhesive counterplate<br />
• Plastic, self-colour<br />
Order no. PU<br />
0 060 230 1/25<br />
Overlay door<br />
2,5<br />
Push-To-Open for handleless furniture doors www.hettich.com<br />
Push-To-Open<br />
6,5<br />
�<br />
41<br />
ø10<br />
± 3,3<br />
± 6,3<br />
± 6,3<br />
± 3,3
Assembly<br />
ø4<br />
Push-To-Open<br />
Push-To-Open for handleless furniture doors<br />
Screw-on adapter for P 2 O Magnet<br />
• For overlay doors<br />
• Grey plastic<br />
• P 2O Magnet, order no. 0 060 230,<br />
must be ordered separately, see page <strong>3.1.</strong>122<br />
Order no. PU<br />
0 060 231 1/25<br />
Overlay door<br />
� � �<br />
2,5<br />
49,5<br />
3,5<br />
13,5<br />
10<br />
6,5<br />
14 32 50<br />
± 3,3<br />
± 6,3<br />
± 6,3<br />
± 3,3<br />
Push-To-Open for handleless furniture doors <strong>3.1.</strong>123
<strong>3.1.</strong>124<br />
Push-To-Open for handleless furniture doors<br />
Linear screw-on adapter for P 2 O Magnet<br />
2,2<br />
Assembly<br />
43<br />
14 16<br />
15,5<br />
� �<br />
ø3<br />
6,5<br />
• For overlay or inset doors<br />
• Grey plastic<br />
• P 2O Magnet, order no. 0 060 230,<br />
must be ordered separately, see page <strong>3.1.</strong>122<br />
Order no. PU<br />
0 040 309 1/25<br />
Overlay door Inset door<br />
14,5<br />
� �<br />
Push-To-Open for handleless furniture doors www.hettich.com<br />
2,2<br />
43<br />
14 16<br />
15,5<br />
Push-To-Open<br />
± 3,3<br />
± 6,3<br />
± 6,3<br />
± 3,3<br />
6,5<br />
14,5
16 1<br />
8<br />
Counterplate with socket<br />
• For surfaces permitting<br />
insufficient adhesion<br />
(e.g. oiled or waxed wood)<br />
Order no. PU<br />
0 045 550 1/25<br />
Assembly<br />
ø4<br />
10<br />
Push-To-Open<br />
Push-To-Open for handleless furniture doors<br />
P 2 O Magnet XL<br />
• Door-opening system for handleless furniture doors<br />
• For overlay doors<br />
• Can only be used in conjunction with Intermat P 2O fast-assembly hinges<br />
(see pages <strong>3.1.</strong>130 - <strong>3.1.</strong>142)<br />
• For door widths of 300 - 600 mm and door heights of 900 - 1600 mm<br />
• Includes self-adhesive counterplate<br />
• Grey plastic<br />
Order no. PU<br />
0 040 307 1/25<br />
Overlay door<br />
� �<br />
�<br />
2,9<br />
40<br />
3,6<br />
13,3<br />
10<br />
7<br />
16,2 32 50<br />
± 3,3<br />
± 6,3<br />
± 6,3<br />
± 3,3<br />
Push-To-Open for handleless furniture doors <strong>3.1.</strong>125
<strong>3.1.</strong>126<br />
Push-To-Open for handleless furniture doors<br />
P 2 O Magnet XL Linear<br />
16 1<br />
8<br />
Counterplate with socket<br />
• For surfaces permitting<br />
insufficient adhesion<br />
(e.g. oiled or waxed wood)<br />
Order no. PU<br />
0 045 550 1/25<br />
Assembly<br />
�<br />
�<br />
10<br />
ø6,3<br />
± 3,3<br />
± 6,3<br />
• Door-opening system for handleless furniture doors<br />
• For overlay and inset doors<br />
• Can only be used in conjunction with Intermat P 2O fast-assembly hinges<br />
(see pages <strong>3.1.</strong>130 - <strong>3.1.</strong>142)<br />
• For door widths of 300 - 600 mm<br />
and door heights of 900 - 1600 mm<br />
• With infinite adjustment of door reveal from 2,3 - 5,3 mm<br />
• Includes self-adhesive counterplate<br />
• Grey plastic<br />
Order no. PU<br />
0 040 308 1/25<br />
Overlay door Inset door<br />
2,3 ø5<br />
± 6,3<br />
± 3,3<br />
55<br />
10<br />
16 32<br />
+3<br />
2,3 ø5<br />
Push-To-Open for handleless furniture doors www.hettich.com<br />
14,7<br />
19,5<br />
�<br />
�<br />
Push-To-Open<br />
55<br />
10<br />
16 32<br />
14,7<br />
19,5
Assembly<br />
�<br />
�<br />
Push-To-Open<br />
± 1,5<br />
ø8<br />
± 1,75<br />
13<br />
3<br />
± 2,5<br />
15<br />
Push-To-Open for handleless furniture doors<br />
P 2 O Pin<br />
• Door-opening system for handleless furniture doors<br />
• For overlay doors<br />
• Can only be used in conjunction with Intermat P 2O fast-assembly hinges<br />
(see pages <strong>3.1.</strong>130 - <strong>3.1.</strong>142)<br />
• For door widths of 300 - 600 mm<br />
and door heights of 300 - 2400 mm<br />
• Grey plastic<br />
Order no. PU<br />
0 060 232 1/25<br />
Overlay door<br />
�<br />
ø5<br />
6,5<br />
10<br />
32<br />
ø5<br />
53<br />
�<br />
14,5<br />
10<br />
21<br />
�<br />
Push-To-Open for handleless furniture doors <strong>3.1.</strong>127
<strong>3.1.</strong>128<br />
Push-To-Open for handleless furniture doors<br />
P 2 O Universal mini<br />
Overlay door<br />
25<br />
0,9<br />
Overlay door<br />
2<br />
14 16<br />
25<br />
64<br />
64<br />
15,5<br />
ø10<br />
14,5<br />
Inset door<br />
2<br />
14 16<br />
25<br />
64<br />
• Door-opening system for handleless furniture doors<br />
• For drilling into overlay doors<br />
• For door widths of 300 - 600 mm<br />
and door heights of 300 - 1600 mm<br />
• Can be used with concealed hinges from the following ranges<br />
– Intermat<br />
– Ecomat<br />
– Slide-on<br />
– Minimat<br />
– Perfekt<br />
• Grey plastic<br />
Order no. PU<br />
9 079 397 1/25<br />
Assembly<br />
Order no. PU<br />
0 040 309 1/25<br />
14,5<br />
� �<br />
�<br />
Push-To-Open for handleless furniture doors www.hettich.com<br />
ø10<br />
Linear screw-on adapter for P2O Universal mini<br />
• For overlay or inset doors<br />
• Grey plastic<br />
• P2O Universal mini, Order no. 9 079 397,<br />
must be ordered separately, see above<br />
Assembly<br />
ø3<br />
Push-To-Open<br />
!<br />
�<br />
�
Assembly<br />
10,5<br />
� �<br />
�<br />
ø3,5 x 13<br />
3<br />
Push-To-Open<br />
± 2,5<br />
6,5<br />
The marking degree must point to<br />
the rear when assembling.<br />
81<br />
16 19 13 21<br />
32<br />
19,5<br />
14,5<br />
Push-To-Open for handleless furniture doors<br />
P 2 O Universal maxi<br />
• Door-opening system for handleless furniture doors<br />
• For overlay and inset doors<br />
• For door widths of 300 - 600 mm<br />
and door heights of 300 - 2400 mm<br />
• Projection 35 - 40 mm<br />
• Can be used with concealed hinges from the following ranges<br />
– Intermat<br />
– Ecomat<br />
– Slide-on<br />
– Minimat<br />
– Perfekt<br />
• Grey plastic<br />
Order no. PU<br />
0 060 233 1/25<br />
Overlay door Inset door<br />
10,5<br />
3<br />
± 2,5<br />
6,5<br />
Push-To-Open for handleless furniture doors <strong>3.1.</strong>129<br />
81<br />
16 19 13 21<br />
32<br />
19,5<br />
14,5
<strong>3.1.</strong>130<br />
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9943 P 2O (Push-To-Open)<br />
Opening angle 110°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge with negative spring, for snap-on mounting<br />
• Toolless cup assembly (TH FIX/TB FIX)<br />
• Door thickness from 15 mm<br />
• Cup diameter 35 mm<br />
• Integrated overlay adjustment + 1,0 mm / - 2,5 mm<br />
• Integrated cam depth adjustment ± 2 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T42<br />
Screw-on version<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Push-To-Open for handleless furniture doors www.hettich.com<br />
Push-To-Open<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
110°<br />
9943 P2O -T42 9943 P2O -TH FIX 9943 P2O -TB FIX<br />
0 060 200 0 060 209 0 060 212<br />
9943 P2O -T42 9943 P2O -TH FIX 9943 P2O -TB FIX<br />
0 060 201 0 060 210 0 060 213<br />
9943 P2O -T42 9943 P2O -TH FIX 9943 P2O -TB FIX<br />
0 060 202 0 060 211 0 060 214<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,5 0,7 1,0 1,3 1,6 2,0 2,6 3,4 4,2 5,0 5,9<br />
4 0,5 0,7 0,9 1,2 1,5 1,9 2,4 3,0 3,8 4,6 5,4<br />
4,5 0,5 0,7 0,9 1,2 1,5 1,9 2,3 2,9 3,6 4,4 5,2<br />
5 0,5 0,7 0,9 1,2 1,5 1,8 2,3 2,8 3,4 4,2 5,0<br />
6 0,4 0,6 0,9 1,1 1,4 1,8 2,2 2,6 3,2 3,9 4,6<br />
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9943 P 2O (Push-To-Open)<br />
Opening angle 110°<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
Door<br />
52<br />
Overlay<br />
Reveal<br />
Overlay<br />
Side<br />
Distance D<br />
2 x Reveal<br />
Side<br />
Reveal<br />
ø35<br />
C<br />
Hole dimensions T42 Hole dimensions TH FIX Hole dimensions TB FIX<br />
Distance D<br />
Cup distance C<br />
Side<br />
5,5<br />
Distance D<br />
11,8<br />
Distance D<br />
Cup distance C<br />
Cup distance C<br />
Door<br />
Door<br />
Door<br />
Door thickness<br />
52<br />
ø35<br />
6 11,8<br />
C<br />
5,5<br />
ø10<br />
45<br />
Cranking H T<br />
mm mm mm<br />
0,0 19,5 7,5<br />
9,5 29,0 17,0<br />
16,0 35,5 23,5<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Overlay mm<br />
C mm 0,5 1,5 2,5 3,5 4,5 5,5 6,5 7,5 8,5<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Distance D mm<br />
3 0,0 0,2 0,5 0,8 1,1 1,5 2,1 2,9 3,7 4,5 5,4<br />
4 1,0 1,2 1,4 1,7 2,0 2,4 2,9 3,5 4,3 5,1 5,9<br />
4,5 1,5 1,7 1,9 2,2 2,5 2,9 3,3 3,9 4,6 5,4 6,2<br />
5 2,0 2,2 2,4 2,7 3,0 3,3 3,8 4,3 4,9 5,7 6,5<br />
6 2,9 3,1 3,4 3,6 3,9 4,3 4,7 5,1 5,7 6,4 7,1<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
6<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,8<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Door<br />
110°<br />
Push-To-Open for handleless furniture doors <strong>3.1.</strong>131<br />
Side<br />
T<br />
H<br />
66
<strong>3.1.</strong>132<br />
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9936 P 2O (Push-To-Open)<br />
for profile doors up to 32 mm, opening angle 95°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge with negative spring, for snap-on mounting<br />
• Toolless cup assembly (TH FIX/TB FIX)<br />
• Door thickness from 15 mm<br />
• Cup diameter 35 mm<br />
• Ideal reveals for doors with profile (hairline reveal)<br />
• For technical details of door contours, see page <strong>3.1.</strong>32<br />
• Integrated overlay adjustment ± 2,5 mm<br />
• Integrated cam depth adjustment + 2,2 mm/- 1,8 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T42<br />
Screw-on<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Push-To-Open for handleless furniture doors www.hettich.com<br />
Push-To-Open<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
9936 P2O -T42 9936 P2O -TH FIX 9936 P2O -TB FIX<br />
0 060 215 0 060 224 0 060 227<br />
9936 P2O -T42 9936 P2O -TH FIX 9936 P2O -TB FIX<br />
0 060 216 0 060 225 0 060 228<br />
9936 P2O -T42 9936 P2O -TH FIX 9936 P2O -TB FIX<br />
0 060 217 0 060 226 0 060 229<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
95°<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9936 P 2O (Push-To-Open)<br />
for profile doors up to 32 mm, opening angle 95°<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,3 0,4 0,6 0,8 1,0 1,3 1,5 1,8 2,2 2,6 3,0 3,6 4,4 5,3 6,2 7,1 8,0 8,9<br />
4 0,3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,8 5,7 6,5 7,4 8,3<br />
4,5 0,3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,3 3,9 4,6 5,4 6,3 7,1 8,0<br />
5 0,3 0,4 0,6 0,8 1,0 1,2 1,5 1,7 2,1 2,4 2,8 3,3 3,8 4,5 5,2 6,0 6,9 7,8<br />
6 0,3 0,4 0,6 0,7 0,9 1,2 1,4 1,7 2,0 2,3 2,7 3,1 3,6 4,2 4,9 5,6 6,4 7,3<br />
7 0,3 0,4 0,5 0,7 0,9 1,1 1,4 1,7 2,0 2,3 2,6 3,0 3,5 4,0 4,6 5,3 6,0 6,8<br />
8 0,3 0,4 0,5 0,7 0,9 1,1 1,4 1,6 1,9 2,2 2,6 3,0 3,4 3,8 4,4 5,0 5,7 6,4<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
T42 hole dimensions TH FIX hole dimensions TB FIX hole dimensions<br />
Overlay<br />
Reveal<br />
Overlay<br />
Door<br />
Side<br />
ø35<br />
Distance D<br />
Side<br />
Reveal<br />
2 x Reveal<br />
C<br />
Distance D<br />
5,5<br />
11,3<br />
Cup distance C<br />
Side<br />
Distance D<br />
Door<br />
Distance D<br />
Cup distance C<br />
Door<br />
Cup distance C<br />
Door<br />
Door thickness<br />
6 11,8<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
52<br />
ø35<br />
C<br />
5,5<br />
ø10<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18 19 20<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
7 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
8 10,5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment ± 2,5 mm<br />
Cranking H T<br />
mm mm mm<br />
0,0 19,5 10,5<br />
9,5 29,0 20,0<br />
16,0 35,5 25,5<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 8 9 10 11<br />
Distance D mm<br />
3 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
6 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
7 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
8 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
Overlay adjustment ± 2,5 mm<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
3<br />
Distance D mm<br />
-0,2 -0,1 0,1 0,3 0,5 0,8 1,0 1,3 1,7 2,1 2,5 3,1 3,9 4,8 5,7 6,6 7,5 8,4<br />
4 0,8 0,9 1,1 1,3 1,5 1,7 2,0 2,3 2,6 3,0 3,4 3,9 4,5 5,3 6,2 7,0 7,9 8,8<br />
4,5 1,3 1,4 1,6 1,8 2,0 2,2 2,5 2,8 3,1 3,5 3,9 4,3 4,9 5,6 6,4 7,3 8,1 9,0<br />
5 1,8 1,9 2,1 2,3 2,5 2,7 3,0 3,2 3,6 3,9 4,3 4,8 5,3 6,0 6,7 7,5 8,4 9,3<br />
6 2,8 2,9 3,1 3,2 3,4 3,7 3,9 4,2 4,5 4,8 5,2 5,6 6,1 6,7 7,4 8,1 8,9 9,8<br />
7 3,8 3,9 4,0 4,2 4,4 4,6 4,9 5,2 5,5 5,8 6,1 6,5 7,0 7,5 8,1 8,8 9,5 10,3<br />
8 4,8 4,9 5,0 5,2 5,4 5,6 5,9 6,1 6,4 6,7 7,1 7,5 7,9 8,3 8,9 9,5 10,2 10,9<br />
Reveal adjustment ± 2,5 mm<br />
45<br />
6<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,8<br />
Push-To-Open for handleless furniture doors <strong>3.1.</strong>133<br />
Doo<br />
Side<br />
T<br />
H<br />
95°<br />
66
<strong>3.1.</strong>134<br />
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9956 P 2O (Push-To-Open)<br />
Opening angle 165° - 120°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
• Concealed hinge with negative spring, for snap-on mounting<br />
• Toolless cup assembly (TH FIX/TB FIX)<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• Ideal reveals (hairline reveal)<br />
• No door protrusion, i.e. unobstructed interior for pull-outs<br />
• Opening angle can be reduced to 120° by infinitely variable amounts (for adjusting<br />
screw, see page below)<br />
• Integrated overlay adjustment + 1,0 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 1,7 mm/- 2,3 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T42<br />
Screw-on<br />
Article/Order no.<br />
120°<br />
Order no. PU<br />
0 048 296 200<br />
165°<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Adjustment screw M5 x14 mm<br />
• Nickel-plated steel<br />
Push-To-Open for handleless furniture doors www.hettich.com<br />
Push-To-Open<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
120°<br />
-<br />
165°<br />
9956 P2O -T42 9956 P2O -TH FIX 9956 P2O -TB FIX<br />
0 040 301 0 040 302 0 040 303<br />
9956 P2O -T42 9956 P2O -TH FIX 9956 P2O -TB FIX<br />
0 040 304 0 040 305 0 040 306<br />
max. 7<br />
Opening angle 165° – the<br />
M5x14 mm adjusting screw<br />
can be used for reducing the<br />
opening angle to 120° by<br />
infinitely variable amounts.<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 079 791 50
Cup distance Door thickness mm<br />
C mm 16 17 18 19<br />
Minimum reveal per door<br />
3 0 0 0 0<br />
4 0 0 0 0<br />
4,5 0 0 0 0<br />
5 0 0 0 0<br />
6 0 0 0 0<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9956 P 2O (Push-To-Open)<br />
Opening angle 165° - 120°<br />
T42 hole dimensions TH FIX hole dimensions TB FIX hole dimensions<br />
Overlay<br />
Door<br />
Side<br />
Reveal<br />
52<br />
Side<br />
Overlay<br />
Reveal<br />
Distance D<br />
2 x Reveal<br />
Distance D<br />
ø35<br />
Distance D<br />
Cup distance C<br />
Side<br />
Cup distance C<br />
C<br />
5,5<br />
11,6<br />
Distance D<br />
Cup distance C<br />
Door<br />
Door<br />
Door<br />
Door thickness<br />
52<br />
The minimum reveal for doors up to 19 mm thick<br />
is 0 mm. A trial assembly is recommended for doors<br />
thicker than 19 mm (max. door thickness 25 mm).<br />
ø35<br />
6 11,6<br />
C<br />
5,5<br />
ø10<br />
No door protrusion T<br />
for 0 mm distance and<br />
3 mm cup distance,<br />
unrestricted runner<br />
movement<br />
Cranking H T<br />
mm mm mm<br />
0,0 58,5 -0,8<br />
9,5 68,0 8,7<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,5 4,5 3,5 2,5 1,5 0,5<br />
4 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
4,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
6 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 8<br />
Distance D mm<br />
3 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5<br />
5 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
6 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0<br />
Overlay adjustment + 1,0 mm / - 2,5 mm<br />
Cup distance Reveal 1 mm<br />
C mm<br />
Distance D mm<br />
3 8,0<br />
4 9,0<br />
4,5 9,5<br />
5 10,0<br />
6 11,0<br />
45<br />
Reveal adjustment + 2,5 mm / - 1,0 mm<br />
6<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,6<br />
Door<br />
Hole-line position<br />
for inset mounting =<br />
37 mm + Door thickness + 1 mm<br />
165°<br />
Push-To-Open for handleless furniture doors <strong>3.1.</strong>135<br />
Side<br />
T<br />
H<br />
66,5
<strong>3.1.</strong>136<br />
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9936 W90 P 2O (Push-To-Open)<br />
for face frame cabinets, Opening angle 95°<br />
Hinge versions<br />
Cranking 5 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Inset door<br />
• Concealed hinge with negative spring, for snap-on mounting<br />
• Toolless cup assembly (TH FIX/TB FIX)<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• Integrated depth adjustment + 2 mm/- 2,5 mm<br />
• Integrated eccentric gap adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
9936 W90 P 2O -T42 9936 W90 P 2O -TH FIX 9936 W90 P 2O -TB FIX<br />
0 040 262 0 040 263 0 040 264<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Push-To-Open for handleless furniture doors www.hettich.com<br />
Push-To-Open<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
W90<br />
90°<br />
95°<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9936 W90 P 2O (Push-To-Open)<br />
for face frame cabinets, Opening angle 95°<br />
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,9 5,7 6,6 7,5 8,4<br />
4 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,8 4,5 5,3 6,1 7,0 7,9<br />
4,5 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,7 4,3 5,1 5,9 6,8 7,7<br />
5 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,4 2,7 3,2 3,6 4,2 4,9 5,7 6,5 7,4<br />
6 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,3 2,6 3,1 3,5 4,0 4,6 5,3 6,1 6,9<br />
7 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,9 2,2 2,6 3,0 3,4 3,9 4,4 5,0 5,7 6,5<br />
8 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,8 2,1 2,5 2,9 3,3 3,7 4,2 4,8 5,4 6,1<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
ø35<br />
C<br />
5,5<br />
11,1<br />
52<br />
ø35<br />
6 11,6<br />
T42 hole dimensions TH FIX hole dimensions TB FIX hole dimensions<br />
Mounting example Calculating distance<br />
Side<br />
Distance D<br />
Side<br />
Distance 5 mm<br />
Reveal<br />
X<br />
28*<br />
A<br />
C<br />
5,5<br />
ø10<br />
Door protrusion<br />
Cup distance C<br />
Door<br />
Door<br />
45<br />
6<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,6<br />
Distance = 5 mm - Door protrusion<br />
The hinges are correctly adjusted on leaving the factory.<br />
Door offset can be corrected as necessary.<br />
Turn screw (A) clockwise:<br />
Door offset can be adjusted by up to 4,5 mm (+ 2 mm/- 2.5 mm).<br />
The back of the door and front panel will be flush if a<br />
mounting plate with distance 5 mm is used.<br />
* The hole distance X, cup distance C and the reveal<br />
must always add up to 28!<br />
X + Cup distance C + Reveal = 28<br />
Calculating hole distance "X"<br />
Cup distance Reveal mm<br />
C mm 0 0,5 1,0 1,5 2,0 2,5 3,0<br />
3 25,0 24,5 24,0 23,5 23,0 22,5 22,0<br />
3,5 24,5 24,0 23,5 23,0 22,5 22,0 21,5<br />
4 24,0 23,5 23,0 22,5 22,0 21,5 21,0<br />
4,5 23,5 23,0 22,5 22,0 21,5 21,0 20,5<br />
5 23,0 22,5 22,0 21,5 21,0 20,5 20,0<br />
5,5 22,5 22,0 21,5 21,0 20,5 20,0 19,5<br />
6 22,0 21,5 21,0 20,5 20,0 19,5 19,0<br />
7 21,0 20,5 20,0 19,5 19,0 18,5 18,0<br />
8 20,0 19,5 19,0 18,5 18,0 17,5 17,0<br />
Push-To-Open for handleless furniture doors <strong>3.1.</strong>137
<strong>3.1.</strong>138<br />
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9936 W30 P 2O (Push-To-Open)<br />
for corner cabinets, Opening angle 95°<br />
Hinge versions<br />
Mounting examples<br />
Intermat 9936 W30<br />
Overlay door<br />
Cranking 7 mm<br />
Cranking - 10 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Overlay<br />
Cup distance C<br />
Mounting options<br />
Overlay door<br />
Inset door<br />
Side<br />
Distance D<br />
Door<br />
30°<br />
• Concealed hinge with negative spring, for snap-on mounting<br />
• Toolless cup assembly (TH FIX/TB FIX)<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• Integrated overlay adjustment + 2 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Intermat 9936 W30<br />
Inset door<br />
Push-To-Open for handleless furniture doors www.hettich.com<br />
Reveal<br />
Cup distance C<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
Side<br />
Distance D<br />
30°<br />
Door<br />
W30<br />
30°<br />
95°<br />
9936 W30 P 2O -T42 9936 W30 P 2O -TH FIX 9936 W30 P 2O -TB FIX<br />
0 040 246 0 040 248 0 040 249<br />
9936 W30 P2O -T42 9936 W30 P2O -TH FIX 9936 W30 P2O -TB FIX<br />
0 040 250 0 040 251 0 040 252<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Push-To-Open<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Full overlay<br />
Overlay adjustment + 2 mm / - 2,5 mm<br />
... Inside cabinet wall for D 8 mm<br />
Cabinet side<br />
C = 3 ... 8 mm<br />
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9936 W30 P 2O (Push-To-Open)<br />
for corner cabinets, Opening angle 95°<br />
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,9 5,7 6,6 7,5 8,4<br />
4 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,8 4,5 5,3 6,1 7,0 7,9<br />
4,5 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,7 4,3 5,1 5,9 6,8 7,7<br />
5 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,4 2,7 3,2 3,6 4,2 4,9 5,7 6,5 7,4<br />
6 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,3 2,6 3,1 3,5 4,0 4,6 5,3 6,1 6,9<br />
7 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,9 2,2 2,6 3,0 3,4 3,9 4,4 5,0 5,7 6,5<br />
8 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,8 2,1 2,5 2,9 3,3 3,7 4,2 4,8 5,4 6,1<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
X Hole line X<br />
Cup distance<br />
range C<br />
ø35<br />
6 11,6<br />
T42 hole dimensions TH FIX hole dimensions TB FIX hole dimensions<br />
Scale 1:1<br />
C<br />
5,5<br />
11,1<br />
52<br />
ø35<br />
C<br />
5,5<br />
ø10<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
45<br />
6<br />
ø35<br />
Cabinet side<br />
C<br />
30° Cup distance<br />
C =<br />
range C<br />
3 ... 8 mm<br />
9,5<br />
ø8<br />
11,6<br />
Inset<br />
Reveal adjustment + 2,5 mm / - 2 mm<br />
C = 3 ... 8 mm<br />
Note:<br />
Drawings on this page are to full<br />
scale and show the hinges plus<br />
mounting plate distances.<br />
By drawing in the required cup<br />
distance C (3-8 mm), the door overlay<br />
can be measured directly from the<br />
applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
For inset-mounted doors, the cup<br />
distance and door thickness must be<br />
taken into account when determining<br />
the minimum reveal.<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
Hole line<br />
30°<br />
Push-To-Open for handleless furniture doors <strong>3.1.</strong>139
<strong>3.1.</strong>140<br />
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9936 W45 P 2O (Push-To-Open)<br />
for corner cabinets, Opening angle 95°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 6 mm<br />
Cranking - 17 mm<br />
Hinge-arm cover cap<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge with negative spring, for snap-on mounting<br />
• Toolless cup assembly (TH FIX/TB FIX)<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• Integrated overlay adjustment + 2 mm/- 2,5 mm<br />
• Integrated cam depth adjustment + 3,5 mm/- 0,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T42<br />
Screw on<br />
Article/Order no.<br />
Order no. PU<br />
0 013 300 1/50<br />
Cup TH FIX<br />
Toolless<br />
with pegs<br />
Cup TB FIX<br />
Toolless<br />
with pegs<br />
Push-To-Open for handleless furniture doors www.hettich.com<br />
W45<br />
45°<br />
95°<br />
9936 W45 P 2O -T42 9936 W45 P 2O -TH FIX 9936 W45 P 2O -TB FIX<br />
0 040 253 0 040 254 0 040 255<br />
9936 W45 P2O -T42 9936 W45 P2O -TH FIX 9936 W45 P2O -TB FIX<br />
0 040 256 0 040 257 0 040 258<br />
9936 W45 P2O -T42 9936 W45 P2O -TH FIX 9936 W45 P2O -TB FIX<br />
0 040 259 0 040 260 0 040 261<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm for Cup T42<br />
• Nickel-plated steel<br />
Push-To-Open<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
Order no. PU<br />
0 048 296 200
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9936 W45 P 2O (Push-To-Open)<br />
for corner cabinets, Opening angle 95°<br />
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,9 3,4 4,0 4,9 5,7 6,6 7,5 8,4<br />
4 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,8 4,5 5,3 6,1 7,0 7,9<br />
4,5 0,4 0,6 0,8 1,0 1,2 1,5 1,8 2,1 2,5 2,8 3,3 3,7 4,3 5,1 5,9 6,8 7,7<br />
5 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,4 2,7 3,2 3,6 4,2 4,9 5,7 6,5 7,4<br />
6 0,4 0,6 0,8 1,0 1,2 1,4 1,7 2,0 2,3 2,6 3,1 3,5 4,0 4,6 5,3 6,1 6,9<br />
7 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,9 2,2 2,6 3,0 3,4 3,9 4,4 5,0 5,7 6,5<br />
8 0,4 0,5 0,7 0,9 1,1 1,3 1,6 1,8 2,1 2,5 2,9 3,3 3,7 4,2 4,8 5,4 6,1<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
52<br />
ø35<br />
C<br />
5,5<br />
11,1<br />
6 11,6<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
52<br />
T42 hole dimensions TH FIX hole dimensions TB FIX hole dimensions<br />
Mounting examples<br />
Intermat 9936 W45 P2O Overlay door<br />
Cranking 0 mm<br />
Overlay<br />
Cup distance C<br />
Side<br />
Distance D<br />
Door<br />
45°<br />
ø35<br />
C<br />
5,5<br />
ø10<br />
45<br />
6<br />
ø35<br />
C<br />
9,5<br />
ø8<br />
11,6<br />
Full overlay, cranking 0 mm<br />
Overlay adjustment + 2 mm / - 2,5 mm<br />
X<br />
Cabinet side<br />
C = 3 ... 8 mm<br />
Note:<br />
Drawings on this page are to full<br />
scale and show the hinges plus<br />
mounting plate distances.<br />
By drawing in the required cup<br />
distance C (3-8 mm), the door overlay<br />
can be measured directly from the<br />
applicable distance line.<br />
The distance from the cabinet front<br />
edge to X on the selected distance line<br />
is also equal to the hole line distance<br />
from the cabinet front edge.<br />
For inset-mounted doors, the cup<br />
distance and door thickness must be<br />
taken into account when determining<br />
the minimum reveal.<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
45°<br />
Hole line<br />
Scale 1:1<br />
Push-To-Open for handleless furniture doors <strong>3.1.</strong>141
<strong>3.1.</strong>142<br />
Fast-assembly concealed hinge for handleless furniture doors<br />
Intermat 9936 W45 P 2O (Push-To-Open)<br />
for corner cabinets, Opening angle 95°<br />
Full overlay, cranking 6 mm<br />
Overlay adjustment + 2 mm / - 2,5 mm<br />
Scale 1:1<br />
Cabinet side<br />
C = 3 ... 8 mm<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
... for D 0 mm<br />
X X<br />
Cup distance<br />
range C<br />
Mounting examples<br />
Intermat 9936 W45 P2O Overlay door<br />
Cranking 6 mm<br />
Overlay<br />
Cup distance C<br />
Side<br />
Distance D<br />
Mounting plates, see pages <strong>3.1.</strong>88 - <strong>3.1.</strong>91<br />
Technical information, see pages <strong>3.1.</strong>10 - <strong>3.1.</strong>11<br />
Mounting configurations for various face angles, see pages <strong>3.1.</strong>93 - <strong>3.1.</strong>103<br />
Door<br />
Hole line Hole line<br />
45°<br />
45°<br />
Inset, cranking - 17 mm<br />
Reveal adjustment + 2,5 mm / - 2 mm<br />
C = 3 ... 8 mm<br />
Push-To-Open for handleless furniture doors www.hettich.com<br />
Cabinet side<br />
Cup distance<br />
range C<br />
Intermat 9936 W45 P 2O<br />
Inset door<br />
Cranking - 17 mm<br />
Reveal<br />
Cup distance C<br />
Push-To-Open<br />
... Inside cabinet wall for D 8 mm<br />
... for D 5 mm<br />
... for D 3 mm<br />
... for D 1,5 mm<br />
Side<br />
... for D 0 mm<br />
Distance D<br />
Door<br />
45°<br />
45°
<strong>3.1.</strong>143
<strong>3.1.</strong>144<br />
Concealed hinge<br />
Slide-on<br />
Great hinge with clear benefits<br />
Silent System – Perfectly controlled closure<br />
Closes furniture doors quietly and gently.<br />
Cup diameter 35 mm<br />
52<br />
ø35<br />
C<br />
5,5<br />
11,3<br />
52<br />
ø35<br />
11 11,3<br />
T42 hole dimensions T43 hole dimensions<br />
Cup versions<br />
T42<br />
Screw on<br />
T43<br />
Press-in<br />
C<br />
5,5<br />
ø10<br />
95°<br />
With self-closing feature<br />
Opening angle 95°<br />
Shallow countersunk depth<br />
for door thicknesses down<br />
to 14 mm<br />
Tested quality<br />
tried and tested in<br />
millions of applications<br />
Concealed hinges Slide-on www.hettich.com<br />
457
Concealed hinge<br />
Slide-on<br />
Hinge versions<br />
for overlay and inset door mounting options Overlay door Overlay door Inset door<br />
!<br />
min.<br />
15<br />
ø5<br />
37<br />
Depth adjustment<br />
Slide-on system<br />
for easy assembly<br />
ø5<br />
±2 mm<br />
Height adjustment<br />
± 2 mm at oblong holes<br />
in the mounting plate<br />
min.<br />
15<br />
Concealed hinges Slide-on <strong>3.1.</strong>145<br />
7,5<br />
The <strong>Hettich</strong>-Direkt fixing system<br />
High pull-out strength on centre panels in<br />
thicknesses down to 15 mm, with asymmetrically<br />
positioned fixing screws<br />
37<br />
Integrated overlay adjustment<br />
+ 0,5 mm/- 2,5 mm<br />
for perfect gap alignment
<strong>3.1.</strong>146<br />
Concealed hinge Slide-on<br />
Technical information<br />
General determination of distances<br />
Mounting plates are available in different distances (0/1,5/3 and<br />
5 mm). The height of the mounting plate is defined by distance D.<br />
Distance D is embossed on the top of each mounting plate. A larger<br />
distance D reduces the overlay for corner and centre stops. In the<br />
case of inset doors, a larger distance D increases the door reveal.<br />
To calculate the required distance, the minimum reveal must first be<br />
determined from the table of minimum door reveals for the type of<br />
hinge concerned. The minimum reveal depends on the cup distance<br />
C and the door thickness. Minimum reveals can be reduced by<br />
increasing the cup distance C and/or affixing radii to the door<br />
edges. The table of minimum door reveals also shows the possible<br />
combinations of door thickness and cup distance C.<br />
Calculating distance for overlay doors<br />
Once the minimum reveal has been defined, the required distance D<br />
can be read off in the table for the required door overlay and the<br />
required cup distance C.<br />
Ideally, the door overlay and value C should be selected to yield a<br />
distance D which is available as a mounting plate.<br />
Example: Overlay = 16 mm and cup distance C = 4,5 mm yield a<br />
distance D equal to 3,0 mm. This distance is available as a mounting<br />
plate.<br />
If the calculated distance D differs from the distances available as<br />
mounting plates, the difference is compensated by means of the<br />
overlay adjustment screw on the hinge arm.<br />
Example: Door overlay = 17 mm and cup distance C = 4,5 mm yield<br />
a distance of 2,0 mm. The overlay is adjusted by - 0,5 mm when<br />
using a mounting plate with a distance = 1,5 mm.<br />
Side<br />
Overlay<br />
Reveal<br />
Distance D<br />
Cup distance C<br />
Overlay adjustment + 0,5 mm / - 2,5 mm<br />
Door<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18 19<br />
Distance D mm<br />
3 7,5 6,5 5,5 4,5 3,5 2,5 1,5<br />
4 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5<br />
4,5 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 0,5<br />
5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5<br />
6 10,5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5<br />
Calculating distance for inset doors<br />
Once the minimum reveal has been defined, the required distance D can<br />
be read off in the table for the required door thickness and the required<br />
cup distance C. This calculated distance D yields a width of joint<br />
between cabinet wall and door edge equal to the minimum reveal as<br />
listed in the table of minimum door reveals.<br />
Ideally, the door overlay and value C should be selected to yield a<br />
distance D which is available as a mounting plate.<br />
Example: Door thickness = 19 mm and cup distance C = 3 mm yield a<br />
distance D equal to 3 mm and thus a door reveal of 1,5 mm<br />
(corresponds to the minimum reveal as listed in the table of minimum<br />
door reveals).<br />
If the calculated distance D differs from the distances available as<br />
mounting plates, the difference is compensated by means of the overlay<br />
adjustment screw on the hinge arm.<br />
Example: Door thickness = 19 mm and cup distance C = 4,5 mm yield a<br />
distance D equal to 4,4 mm.<br />
Use of a mounting plate with D = 5 mm yields a door reveal of 2 mm<br />
(1,4 mm minimum reveal + 0,6 mm due to the difference between<br />
distance D and the mounting plate with D = 5 mm). However, if a door<br />
reveal of 1,5 mm is preferred, the gap must be reduced by 0,5 mm.<br />
Distance D increases proportionally if a larger door reveal is required.<br />
Example: Door thickness = 19 mm, cup distance C = 3 mm, required<br />
door reveal = 3 mm: 3 mm distance yield a minimum reveal of 1,5 mm<br />
+ 1,5 mm enlargement (value = required reveal – minimum reveal)<br />
= 4,5 mm required distance D. A mounting plate with D = 5 mm is used.<br />
The reveal is reduced by 0,5 mm with the aid of the overlay adjusting<br />
screw on the hinge arm.<br />
Distance D<br />
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25<br />
Distance D mm<br />
3 2,1 2,3 2,6 3,0 3,4 3,9 4,6 5,5 6,3 7,3<br />
4 3,0 3,2 3,5 3,9 4,3 4,8 5,3 6,0 6,8 7,8<br />
4,5 3,4 3,5 3,9 4,4 4,8 5,3 5,8 6,4 7,1 8,0<br />
5 3,7 3,9 4,3 4,8 5,2 5,7 6,2 6,8 7,5 8,3<br />
6 4,5 4,8 5,2 5,8 6,1 6,5 7,0 7,7 8,3 9,0<br />
Reveal adjustment + 2,5 mm / - 0,5 mm<br />
Concealed hinges Slide-on www.hettich.com<br />
Side<br />
Reveal<br />
Cup distance C<br />
Door<br />
Door thickness<br />
i
i<br />
Assembly Disassembly<br />
12<br />
Slide the side arm of the hinge<br />
under the premounted screw on the<br />
mounting plate and push home.<br />
Door adjustment<br />
<strong>Hettich</strong> Slide-on hinges offer all the benefits of<br />
three-dimensional adjustability (vertical, lateral and<br />
depth) to get doors perfectly aligned.<br />
Overlay adjustment<br />
- 2,5 mm<br />
+ 0,5 mm<br />
Turn screw clockwise:<br />
Door overlay decreases (-).<br />
Turn screw anticlockwise:<br />
Door overlay increases (+).<br />
2<br />
The screw is now tightened<br />
corresponding to the required<br />
depth position of the door.<br />
<strong>Hettich</strong> Direkt<br />
The <strong>Hettich</strong>-Direkt mounting plate is ideal<br />
for centre panels from 15 mm thickness.<br />
The premounted locating pegs are simply inserted<br />
into the ø5 mm hole line. Even before being screwed<br />
into position, the mounting plate sits firmly into<br />
the drilling.<br />
This simplifies assembly not only of the centre panel,<br />
but also in the cabinet area.<br />
The special screws, which are also pre-mounted in<br />
the mounting plate, are arranged asymmetrically so that<br />
they do not foul one another when mounted in the<br />
centre upright area.<br />
This patented solution makes it feasible to use<br />
longer screws with better tear-out values which<br />
provide improved safety in daily use.<br />
The entire height can be adjusted via the oval<br />
mounting holes!<br />
Depth adjustment<br />
± 2,0 mm<br />
Loosen the screw and adjust the gap between door<br />
and cabinet. Then retighten the screw.<br />
1<br />
37<br />
ø5<br />
Concealed hinge Slide-on<br />
Technical information<br />
2<br />
Disassemble the hinge in reverse order.<br />
min.<br />
15<br />
Height adjustment<br />
±2 mm<br />
Loosen the mounting plate screws and adjust the<br />
door height. Then retighten the screws.<br />
ø5<br />
min.<br />
15<br />
7,5<br />
Concealed hinges Slide-on <strong>3.1.</strong>147<br />
37
<strong>3.1.</strong>148<br />
Concealed hinge<br />
Slide-on 2333<br />
Opening angle 95°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 9,5 mm<br />
Cranking 16 mm<br />
Hinge-arm cover cap<br />
• Plastic<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Concealed hinge with slide-on assembly system<br />
• Door thickness from 14 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 0,5 mm / - 2,5 mm<br />
• Integrated depth adjustment ± 2 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T42<br />
Screw-on<br />
Article/Order no.<br />
2333-T42 2333-T43<br />
1 078 660 1 078 663<br />
2333-T42 2333-T43<br />
1 078 661 1 078 664<br />
2333-T42 2333-T43<br />
1 078 662 1 078 665<br />
Finish Order no. PU<br />
grey 9 040 947 2500<br />
black 9 037 365 2500<br />
Cup T43<br />
Press-in<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm<br />
for cup T42<br />
• Nickel-plated steel<br />
Concealed hinges Slide-on www.hettich.com<br />
95°<br />
PU<br />
200<br />
PU<br />
200<br />
PU<br />
200<br />
Order no. PU<br />
0 048 296 200
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,6 0,8 1,1 1,5 1,9 2,4 3,1 4,0 4,8 5,8<br />
4 0,5 0,7 1,0 1,4 1,8 2,3 2,8 3,5 4,3 5,3<br />
4,5 0,4 0,5 0,9 1,4 1,8 2,3 2,8 3,4 4,1 5,0<br />
5 0,2 0,4 0,8 1,3 1,7 2,2 2,7 3,3 4,0 4,8<br />
6 0 0,3 0,7 1,3 1,6 2,0 2,5 3,2 3,8 4,5<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
T42 hole dimensions T43 hole dimensions<br />
Push-To-Open<br />
Door<br />
52<br />
Side<br />
Overlay<br />
Reveal<br />
Overlay<br />
Distance D<br />
Side<br />
ø35<br />
2 x Reveal<br />
Reveal<br />
C<br />
Distance D<br />
Side<br />
5,5<br />
11,3<br />
Door<br />
Cup distance C<br />
Distance D<br />
Cup distance C<br />
Distance D<br />
Cup distance C<br />
Door<br />
Door<br />
Door<br />
thickness<br />
52<br />
ø35<br />
11 11,3<br />
Silent System, see pages <strong>3.1.</strong>116 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>150 - <strong>3.1.</strong>151<br />
Technical information, see pages <strong>3.1.</strong>146 - <strong>3.1.</strong>147<br />
C<br />
5,5<br />
ø10<br />
Concealed hinge<br />
Slide-on 2333<br />
Opening angle 95°<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 1,5 mm distance<br />
and 3 mm<br />
cup distance<br />
Door<br />
T 95°<br />
Cranking H T<br />
mm mm mm<br />
0 19,0 6,0<br />
9,5 28,5 15,5<br />
16 35,0 22,0<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18 19<br />
Distance D mm<br />
3 7,5 6,5 5,5 4,5 3,5 2,5 1,5<br />
4 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5<br />
4,5 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 0,5<br />
5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5<br />
6 10,5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5<br />
Overlay adjustment + 0,5 mm / - 2,5 mm<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 8 9 10<br />
Distance D mm<br />
3 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0<br />
4 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0<br />
4,5 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5 0<br />
5 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0<br />
6 11,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1<br />
Overlay adjustment + 0,5 mm / - 2,5 mm<br />
Cup distance Door thickness mm<br />
C mm 16 17 18 19 20 21 22 23 24 25<br />
Distance D mm<br />
3 2,1 2,3 2,6 3,0 3,4 3,9 4,6 5,5 6,3 7,3<br />
4 3,0 3,2 3,5 3,9 4,3 4,8 5,3 6,0 6,8 7,8<br />
4,5 3,4 3,5 3,9 4,4 4,8 5,3 5,8 6,4 7,1 8,0<br />
5 3,7 3,9 4,3 4,8 5,2 5,7 6,2 6,8 7,5 8,3<br />
6 4,5 4,8 5,2 5,8 6,1 6,5 7,0 7,7 8,3 9,0<br />
Reveal adjustment + 2,5 mm / - 0,5 mm<br />
Side<br />
54,5<br />
Concealed hinges Slide-on <strong>3.1.</strong>149<br />
H
<strong>3.1.</strong>150<br />
Mounting plate system 2006<br />
for Slide-on hinges<br />
Article Distance Distance Order no. PU<br />
Hole line mm<br />
mm<br />
Screw-on<br />
cross mounting plate<br />
• Hole distance 32 mm<br />
• With elongated 5.4 mm ø holes<br />
for height adjustment ± 2 mm<br />
• Premounted hinge-arm<br />
fixing screw<br />
• Nickel-plated steel<br />
Patented screw-on<br />
cross mounting plate<br />
<strong>Hettich</strong> Direkt<br />
• Hole distance 32 mm<br />
• With premounted<br />
hinge-arm fixing screw,<br />
premounted locating pegs<br />
and asymmetrically positioned<br />
special screws<br />
• For 5 mm ø 5 x 7,5 mm holes<br />
• Elongated holes for height<br />
adjustment ± 2 mm<br />
• Nickel-plated steel<br />
Screw-on<br />
cross mounting plate<br />
• Hole distance 32 mm<br />
• With premounted<br />
hinge-arm connector screw,<br />
premounted Euro screws<br />
for 5 mm ø x 12 mm holes<br />
• Elongated holes for height<br />
adjustment ± 2 mm<br />
• Nickel-plated steel<br />
ø5<br />
min.<br />
15<br />
ø5<br />
7,5<br />
12<br />
37<br />
37<br />
37<br />
37 0,0 1 079 197* 400<br />
1,5 1 079 198 400<br />
3,0 1 079 199 400<br />
5,0 1 079 200 400<br />
* not suitable for Slide-on 2333<br />
cranking 0 mm<br />
Fixing with countersunk<br />
wood screws ø 4,5 mm<br />
37 1,5 1 079 210 400<br />
3,0 1 079 211 400<br />
5,0 1 079 212 400<br />
37 0,0 1 079 221* 400<br />
1,5 1 079 222 400<br />
3,0 1 079 223 400<br />
5,0 1 079 224 400<br />
* not suitable for Slide-on 2333<br />
cranking 0 mm<br />
Concealed hinges Slide-on www.hettich.com<br />
32<br />
32<br />
32
Article Distance Angle Order no. PU<br />
Hole line<br />
mm<br />
Angle plate<br />
for cross mounting plate<br />
• Silver-grey plastic<br />
Assembly note angle plates 5°/10°:<br />
1. Sockets<br />
or<br />
2,5<br />
2,5 9,5<br />
Insert in ø 5 mm hole line drilling<br />
2. Mounting and angle plates<br />
Fasten with chipboard screws ø 4 mm<br />
or ø 4,5 mm.<br />
Distance spacer plate<br />
for cross mounting plate<br />
• Silver-grey plastic<br />
13<br />
5°<br />
10°<br />
Socket no. 41<br />
Order no. PU<br />
0 048 575 1/200<br />
Socket no. 42<br />
Order no. PU<br />
0 048 574 1/200<br />
3,0 mm<br />
5,0 mm<br />
10,0 mm<br />
5° 10°<br />
System 2006 angle mounting plates and<br />
parallel distance plates for Slide-on hinges<br />
3<br />
5<br />
10<br />
15°<br />
37 5° 0 079 349 1/50<br />
10° 0 079 350 1/50<br />
• A trial mounting is always<br />
recommended for<br />
configurations of this type!<br />
• Cabinet angle can be<br />
increased or reduced simply<br />
by turning the plastic angle<br />
plates<br />
• Angle plates and parallel<br />
spacer plates can be stacked<br />
• Can only be used with<br />
screw-on cross mounting<br />
plate order no.<br />
1 079 197 - 1 079 200<br />
(see page <strong>3.1.</strong>150)<br />
Article Distance Distance Order no. PU<br />
Hole line mm<br />
mm<br />
37 3,0 0 079 323 1/50<br />
5,0 0 079 324 1/50<br />
10,0 0 079 325 1/50<br />
• Can only be used with<br />
screw-on cross mounting<br />
plate order no.<br />
1 079 197 - 1 079 200<br />
(see page <strong>3.1.</strong>150)<br />
Concealed hinges Slide-on <strong>3.1.</strong>151
<strong>3.1.</strong>152<br />
Miniature concealed hinge Minimat<br />
Mini-hinge for maximum effect<br />
Cup diameter 26 mm<br />
ideal for smaller-type wooden/glass doors or<br />
doors with narrow wooden frames<br />
Cup versions<br />
38<br />
95°<br />
ø26<br />
T42<br />
Screw on<br />
Opening angle 95°<br />
Shallow countersunk depth<br />
for door thicknesses down to 15 mm<br />
C<br />
8<br />
12<br />
38<br />
ø26<br />
11 12<br />
T43<br />
Press-in<br />
C<br />
8<br />
ø8<br />
With or without<br />
self-closing feature<br />
4 - 6,5 mm<br />
ø 26<br />
T1<br />
Screw on<br />
for glass doors<br />
Concealed hinges Minimat www.hettich.com<br />
5,5 +0,5
Miniature concealed hinge Minimat<br />
Hinge versions<br />
For overlay and inset door mounting options Overlay door Overlay door Inset door<br />
!<br />
min.<br />
15<br />
ø5<br />
37<br />
Depth adjustment<br />
ø5<br />
±2 mm<br />
Keyhole assembly system<br />
for easy installation<br />
Height adjustment<br />
± 2 mm at oblong holes<br />
in the mounting plate<br />
min.<br />
15<br />
Concealed hinges Minimat <strong>3.1.</strong>153<br />
7,5<br />
The <strong>Hettich</strong>-Direkt fixing system<br />
high pull-out strength on centre panels in<br />
thicknesses down to 15 mm, with asymmetrically<br />
positioned fixing screws<br />
37<br />
Integrated overlay adjustment<br />
+ 0 mm/- 4 mm<br />
for perfect reveal alignment
<strong>3.1.</strong>154<br />
Miniature concealed hinge<br />
Minimat<br />
Technical information<br />
General determination of distances<br />
Mounting plates are available in different distances (0/1,5/3 and<br />
5 mm). The height of the mounting plate is defined by distance D.<br />
Distance D is embossed on the top of each mounting plate. A larger<br />
distance D reduces the overlay for corner and centre stops. In the<br />
case of inset doors, a larger distance D increases the door reveal.<br />
To calculate the required distance, the minimum reveal must first be<br />
determined from the table of minimum door reveals for the type of<br />
hinge concerned. The minimum reveal depends on the cup distance<br />
C and the door thickness. Minimum reveals can be reduced by<br />
increasing the cup distance C and/or affixing radii to the door<br />
edges. The table of minimum door reveals also shows the possible<br />
combinations of door thickness and cup distance C.<br />
Calculating distance for overlay doors<br />
Once the minimum reveal has been defined, the required distance D<br />
can be read off in the table for the required door overlay and the<br />
required cup distance C.<br />
Ideally, the door overlay and value C should be selected to yield a<br />
distance D which is available as a mounting plate.<br />
Example: Overlay = 15 mm and cup distance C = 4,5 mm yield a<br />
distance D equal to 1,5 mm. This distance is available as a mounting<br />
plate.<br />
If the calculated distance D differs from the distances available as<br />
mounting plates, the difference is compensated by means of the<br />
overlay adjustment screw on the hinge arm.<br />
Example: Door overlay = 16 mm and cup distance C = 5 mm yield a<br />
distance of 1,0 mm. The overlay is adjusted by +0.5 mm when using<br />
a mounting plate with a distance = 1,5 mm.<br />
Reveal<br />
Side<br />
Overlay<br />
Distance D<br />
Door<br />
Cup distance C<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5 -0,5<br />
5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
5,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5 -0,5<br />
Calculating distance for inset doors<br />
Once the minimum reveal has been defined, the required distance D can<br />
be read off in the table for the required door thickness and the required<br />
cup distance C. This calculated distance D yields a width of joint<br />
between cabinet wall and door edge equal to the minimum reveal as<br />
listed in the table of minimum door reveals.<br />
Ideally, the door overlay and value C should be selected to yield a<br />
distance D which is available as a mounting plate.<br />
Example: Door thickness = 18 mm and cup distance C = 6 mm yield a<br />
distance D equal to 3 mm and thus a door reveal of 1,3 mm<br />
(corresponds to the minimum reveal as listed in the table of minimum<br />
door reveals).<br />
If the calculated distance D differs from the distances available as<br />
mounting plates, the difference is compensated by means of the overlay<br />
adjustment screw on the hinge arm.<br />
Example: Door thickness = 19 mm and cup distance C = 4,5 mm yield a<br />
distance D equal to 2,9 mm.<br />
Use of a mounting plate with D = 3 mm yields a door reveal of 2,3 mm<br />
(2,2 mm minimum reveal + 0,1 mm due to the difference between<br />
distance D and the mounting plate with D = 3 mm).<br />
However, if a door reveal of 3,0 mm is preferred, the reveal must be<br />
increased by 0,7 mm.<br />
Distance D<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23<br />
Distance D mm<br />
3 -0,5 -0,1 0,3 1,1 1,9 2,7 3,6 4,6 5,5<br />
4 0,5 0,8 1,2 1,8 2,5 3,3 4,2 5,0 5,9<br />
4,5 1,0 1,3 1,7 2,3 2,9 3,6 4,5 5,3 6,1<br />
5 1,5 1,8 2,2 2,7 3,2 3,9 4,7 5,5 6,3<br />
6 2,0 2,3 2,6 3,0 3,5 4,2 5,0 5,8 6,6<br />
Overlay adjustment + 0,5 mm / - 4 mm Reveal adjustment + 4 mm / - 0 mm<br />
Concealed hinges Minimat www.hettich.com<br />
Reveal<br />
Side<br />
Door<br />
Door thickness<br />
Cup distance C<br />
i
2<br />
i<br />
Assembly<br />
1<br />
The keyhole in the side section of the hinge is fitted<br />
over the premounted screw on the mounting plate �<br />
and pushed back �.<br />
As a general rule, hinges are mounted in sequence from top to bottom.<br />
Once fitted, the topmost hinge takes part of the door's weight.<br />
Hinges are removed in the opposite sequence, i.e. from bottom to top.<br />
Door adjustment<br />
Needless to say, Minimat hinges permit<br />
three-dimensional adjustability for precision<br />
positioning of door height, side and depth.<br />
Overlay adjustment<br />
-4 mm<br />
Turn screw clockwise:<br />
Door overlay decreases (-).<br />
Turn screw anticlockwise:<br />
Door overlay increases (+).<br />
<strong>Hettich</strong> Direkt<br />
The <strong>Hettich</strong>-Direkt mounting plate is ideal<br />
for centre panels from 15 mm thickness.<br />
The premounted locating pegs are simply inserted into<br />
the ø5 mm hole line. Even before being screwed into<br />
position, the mounting plate sits firmly into the drilling.<br />
This simplifies assembly not only of the centre panel,<br />
but also in the cabinet area.<br />
The special screws, which are also pre-mounted in<br />
the mounting plate, are arranged asymmetrically so<br />
that they do not foul one another when mounted in the<br />
centre upright area.<br />
This patented solution makes it feasible to use<br />
longer screws with better tear-out values which<br />
provide improved safety in daily use.<br />
The entire height can be adjusted via the<br />
oval mounting holes!<br />
Depth adjustment<br />
± 2,5 mm<br />
Miniature concealed hinge<br />
Minimat<br />
Technical information<br />
3<br />
The screw is now tightened corresponding to the<br />
required depth position of the door. �.<br />
+0 mm ±2 mm<br />
Loosen the screw and adjust the gap between<br />
door and cabinet. Then retighten the screw.<br />
min.<br />
15<br />
ø5<br />
37<br />
Height adjustment<br />
Using height-adjustable mounting plates makes<br />
it possible to align the exact door height.<br />
ø5<br />
min.<br />
15<br />
7,5<br />
Concealed hinges Minimat <strong>3.1.</strong>155<br />
37
<strong>3.1.</strong>156<br />
Miniature concealed hinge<br />
Minimat 2225/2255<br />
Opening angle 95°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 8 mm<br />
Cranking 16 mm<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Miniature hinge for keyhole attachment<br />
• Door thickness from 15 mm<br />
• Cup diameter 26 mm<br />
• With/without self-closing function<br />
• Integrated overlay adjustment + 0 mm / - 4,0 mm<br />
• Depth adjustment ± 2,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Cup versions<br />
Cup T42<br />
Screw-on<br />
Mounting options Article/Order no.<br />
● self-closing<br />
❍ without self-closing function<br />
Cup T43<br />
Press-in<br />
● 2225-T42 ❍ 2255-T42 ● 2225-T43 ❍ 2255-T43<br />
1 067 650 1 067 652 1 067 655 1 067 658<br />
● self-closing<br />
❍ without self-closing function<br />
● 2225-T42 ❍ 2255-T42 ● 2225-T43 ❍ 2255-T43<br />
1 067 651 1 067 653 1 067 656 1 067 659<br />
● self-closing<br />
❍ without self-closing function<br />
● 2225-T42 ❍ 2255-T42 ● 2225-T43 ❍ 2255-T43<br />
1 066 625 1 067 654 1 067 657 1 067 660<br />
ø26 95°<br />
Concealed hinges Minimat www.hettich.com<br />
PU<br />
500<br />
PU<br />
500<br />
PU<br />
500
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23 24 25<br />
Minimum reveal per door – allow for in distance calculation<br />
Table entries apply to doors with 0 mm radius<br />
3 0,6 0,8 1,2 1,9 2,8 3,6 4,5 5,4 6,3 7,2 8,2<br />
4 0,6 0,8 1,1 1,6 2,3 3,1 4,0 4,8 5,7 6,6 7,5<br />
4,5 0,5 0,7 1,0 1,5 2,2 2,9 3,7 4,6 5,5 6,4 7,3<br />
5 0,5 0,7 1,0 1,4 2,0 2,7 3,5 4,4 5,2 6,1 7,0<br />
6 0,5 0,7 1,0 1,3 1,9 2,6 3,3 4,1 5,0 5,8 6,7<br />
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm<br />
3 mm radius: table entry – 1,2 mm<br />
T42 hole dimensions T43 hole dimensions<br />
Door<br />
Push-To-Open<br />
38<br />
Overlay<br />
Reveal<br />
Overlay<br />
Reveal<br />
ø26<br />
Side<br />
Distance D<br />
2 x Reveal<br />
Side<br />
C<br />
8<br />
12<br />
Distance D<br />
Door<br />
Cup distance C<br />
Side<br />
Distance D<br />
Distance D<br />
Cup distance C<br />
Door<br />
38<br />
ø26<br />
11 12<br />
Door<br />
Door thickness<br />
Cup distance C<br />
Silent System, see pages <strong>3.1.</strong>116 - <strong>3.1.</strong>118<br />
Push-To-Open, see pages <strong>3.1.</strong>128 - <strong>3.1.</strong>129<br />
Mounting plates, see pages <strong>3.1.</strong>160 - <strong>3.1.</strong>161<br />
Technical information, see pages <strong>3.1.</strong>154 - <strong>3.1.</strong>155<br />
C<br />
8<br />
ø8<br />
Miniature concealed hinge<br />
Minimat 2225/2255<br />
Opening angle 95°<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 3 mm<br />
cup distance<br />
Cup distance Overlay mm<br />
C mm 0 1 2 3 4 5 6 7 8 9 10<br />
Distance D mm<br />
3 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5 -0,5<br />
5 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
6 9,5 8,5 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5 -0,5<br />
Cup distance Door thickness mm<br />
C mm 15 16 17 18 19 20 21 22 23<br />
Distance D mm<br />
3 -0,5 -0,1 0,3 1,1 1,9 2,7 3,6 4,6 5,5<br />
4 0,5 0,8 1,2 1,8 2,5 3,3 4,2 5,0 5,9<br />
4,5 1,0 1,3 1,7 2,3 2,9 3,6 4,5 5,3 6,1<br />
5 1,5 1,8 2,2 2,7 3,2 3,9 4,7 5,5 6,3<br />
6 2,0 2,3 2,6 3,0 3,5 4,2 5,0 5,8 6,6<br />
Side<br />
Door<br />
Cranking H T<br />
mm mm mm<br />
0 16,9 3,4<br />
8 20,3 11,4<br />
16 28,3 19,4<br />
Cup distance Overlay mm<br />
C mm 10 11 12 13 14 15 16 17 18<br />
Distance D mm<br />
3 5,0 4,0 3,0 2,0 1,0 0,0<br />
4 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
4,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5 -0,5<br />
5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0<br />
6 7,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5 -0,5<br />
Overlay adjustment + 0 mm / - 4 mm<br />
Overlay adjustment + 0 mm / - 4 mm<br />
Reveal adjustment + 4 mm / - 0 mm<br />
Concealed hinges Minimat <strong>3.1.</strong>157<br />
H<br />
T<br />
54<br />
95°
<strong>3.1.</strong>158<br />
Miniature glass-door hinge<br />
Minimat 2205<br />
Opening angle 95°<br />
Hinge versions<br />
Cranking 0 mm<br />
Cranking 8 mm<br />
Cranking 16 mm<br />
Hinge-cup fixing screw for glass<br />
panel thicknesses of 5,5 - 6,5 mm<br />
• Nickel-plated steel<br />
Mounting options<br />
Overlay door<br />
Overlay door<br />
Inset door<br />
• Miniature hinge for keyhole attachment<br />
• For glass panel thicknesses of 4 - 6,5 mm<br />
• Cup diameter 26 mm<br />
• With self-closing feature<br />
• Integrated overlay adjustment + 0 mm/- 4 mm<br />
• Depth adjustment ± 2,5 mm<br />
• Height adjustment at mounting plate ± 2 mm<br />
• Hinge cup: black plastic<br />
• Hinge arm: nickel-plated steel<br />
• Please order hinge-cup fixing screws separately<br />
for pane thicknesses of 5,5 - 6,5 mm, see page below<br />
• For decorative caps, see page <strong>3.1.</strong>159<br />
Cup versions<br />
Cup T1<br />
Screw-on<br />
Article/Order no.<br />
2205-T1<br />
1 069 676<br />
2205-T1<br />
1 069 677<br />
2205-T1<br />
1 057 482<br />
Order no. PU<br />
9 082 429 200<br />
Concealed hinges Minimat www.hettich.com<br />
PU<br />
500<br />
PU<br />
500<br />
PU<br />
500<br />
ø 26<br />
ø26 95°<br />
T1 hole dimensions<br />
Glass<br />
5,5 +0,5<br />
Glass<br />
4 - 6,5 mm Panel thickness
Decorative cap A Decorative cap B<br />
Finishes Order no. PU<br />
Decorative cap A Decorative cap B<br />
high-gloss gold 0 040 340 0 040 494 1/50<br />
high-gloss chrome 0 040 341 0 040 495 1/50<br />
black 0 070 051 0 070 052 1/50<br />
matt nickel-plated 0070712 0070713 1/50<br />
Reveal<br />
Overlay<br />
Glass door<br />
Side !<br />
Overlay<br />
Distance D<br />
2 x Reveal<br />
Side<br />
Reveal<br />
Distance D<br />
Cup distance C<br />
Side<br />
Distance D<br />
Glass door<br />
Distance D<br />
Glass door<br />
Cup distance C<br />
Cup distance C<br />
Cup<br />
Glass door<br />
Mounting plates, see pages <strong>3.1.</strong>160 - <strong>3.1.</strong>161<br />
Technical information, see pages <strong>3.1.</strong>154 - <strong>3.1.</strong>155<br />
2225 Glastür K0 vorliegender Anschlag<br />
distance Overlay mm<br />
C mm 11 12 13 14 15 16 17 17,5 18<br />
Overlay adjustment + 0 mm / - 4 mm<br />
2225 Glastür K8 Mittelwandanschlag<br />
Cup distance Overlay mm<br />
C mm 2,5 3,5 4,5 5,5 6,5 7,5 8,5 9,0 9,5 10<br />
Distance D mm<br />
5,5 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,5 0,0 -0,5<br />
Overlay adjustment + 0 mm / - 4 mm<br />
2225 Glastür K16 einliegender Anschlag<br />
Reveal = 1,5 mm<br />
Cup distance = 5,5 mm<br />
Distance D = 3,0 mm<br />
Reveal adjustment + 4 mm / - 0 mm<br />
Miniature glass-door hinge<br />
Minimat 2205<br />
Opening angle 95°<br />
Hinge protrusion H/<br />
door protrusion T<br />
for 0 mm distance<br />
and 5,5 mm<br />
cup distance<br />
Distance D mm<br />
5,5 6,5 5,5 4,5 3,5 2,5 1,5 0,5 0,0 -0,5<br />
Door<br />
Side<br />
Cranking H T<br />
mm mm mm<br />
1 16,9 2,1<br />
8 20,3 10,1<br />
16 28,3 18,1<br />
Concealed hinges Minimat <strong>3.1.</strong>159<br />
H<br />
T<br />
54<br />
95°
<strong>3.1.</strong>160<br />
Mounting plates System 2006<br />
for Minimat hinges<br />
Article Distance Distance Order no. PU<br />
Hole line mm<br />
mm<br />
Screw-on<br />
cross mounting plate<br />
• Hole distance 32 mm<br />
• With elongated 5,4 mm ø holes<br />
for height adjustment ± 2 mm<br />
• Premounted hinge-arm fixing<br />
screw<br />
• Nickel-plated steel<br />
Patented screw-on<br />
cross mounting plate<br />
"<strong>Hettich</strong> Direkt"<br />
• Hole distance 32 mm<br />
• With premounted<br />
hinge-arm fixing screw,<br />
premounted locating pegs<br />
and asymmetrically<br />
positioned special screws<br />
• For 5 mm ø 5 x 7,5 mm holes<br />
• Elongated holes for height<br />
adjustment ± 2 mm<br />
• Nickel-plated steel<br />
Screw-on<br />
cross mounting plate<br />
• Hole distance 32 mm<br />
• With premounted hinge-arm<br />
connector screw, premounted<br />
Euro screws<br />
for 5 mm ø x 12 mm holes<br />
• Elongated holes for height<br />
adjustment ± 2 mm<br />
• Nickel-plated steel<br />
ø5<br />
min.<br />
15<br />
ø5<br />
7,5<br />
12<br />
37<br />
37<br />
37<br />
37 0,5 1 079 197* 400<br />
1,5 1 079 198 400<br />
3,0 1 079 199 400<br />
5,0 1 079 200 400<br />
* do not use for Minimat<br />
0 mm cranking!<br />
Fixing with countersunk<br />
wood screws ø 4,5 mm<br />
37 1,5 1 079 210 400<br />
3,0 1 079 211 400<br />
5,0 1 079 212 400<br />
37 0,0 1 079 221* 400<br />
1,5 1 079 222 400<br />
3,0 1 079 223 400<br />
5,0 1 079 224 400<br />
* do not use for Minimat<br />
0 mm cranking!<br />
Concealed hinges Minimat www.hettich.com<br />
32<br />
32<br />
32
Angle mounting plates and parallel distance plates System 2006<br />
for Minimat hinges<br />
Article Distance Angle Order no. PU<br />
Hole line<br />
mm<br />
Angle plate<br />
for cross mounting plate<br />
• Silver-grey plastic<br />
Assembly note angle plates 5°/10°:<br />
1. Sockets<br />
or<br />
2,5<br />
2,5 9,5<br />
Insert in ø 5 mm hole line drilling<br />
Distance spacer plate<br />
for cross mounting plate<br />
• Silver-grey plastic<br />
5°<br />
10°<br />
Socket no. 41<br />
Socket no. 42<br />
2. Mounting and angle plates<br />
Fasten with chipboard screws ø 4 mm or ø 4,5 mm.<br />
13<br />
Order no. PU<br />
0 048 575 1/200<br />
Order no. PU<br />
0 048 574 1/200<br />
3,0 mm<br />
5,0 mm<br />
10,0 mm<br />
5° 10°<br />
3<br />
5<br />
10<br />
• A trial mounting is always<br />
recommended for<br />
configurations of this type!<br />
• Cabinet angle can be<br />
increased or reduced<br />
simply by turning the<br />
plastic angle plates<br />
• Angle plates and parallel<br />
spacer plates can be stacked<br />
• Can only be used<br />
with screw-on cross<br />
mounting plate order no.<br />
1 079 197 - 1 079 200<br />
(see page <strong>3.1.</strong>160)<br />
Article Distance Distance Order no. PU<br />
Hole line mm<br />
mm<br />
15°<br />
37 5° 0 079 349 1/50<br />
10° 0 079 350 1/50<br />
37 3,0 0 079 323 1/50<br />
5,0 0 079 324 1/50<br />
10,0 0 079 325 1/50<br />
• Can only be used<br />
with screw-on cross<br />
mounting plate order no.<br />
1 079 197 - 1 079 200<br />
(see page <strong>3.1.</strong>160)<br />
Concealed hinges Minimat <strong>3.1.</strong>161
<strong>3.1.</strong>162<br />
Concealed hinges<br />
Perfekt<br />
Special hinge<br />
for display cases and corner cabinets<br />
Modern furniture design often requires extraordinary technical solutions.<br />
With its special hinge programme for display cases and corner cabinets,<br />
<strong>Hettich</strong> once again demonstrates its ability to offer an optimal solution<br />
for any fitting problem.<br />
Ideal for 90° cabinets<br />
with blind panels ...<br />
Cup diameter<br />
35 mm for<br />
wooden doors<br />
… or 45° mounting options<br />
Shallow countersunk depth<br />
for door thicknesses down to 15 mm<br />
26 mm for small<br />
wooden/wood-framed doors<br />
26 mm for<br />
glass doors<br />
Concealed hinges Perfekt www.hettich.com
With self-closing feature<br />
Opening angle 95°<br />
Concealed hinges<br />
Perfekt<br />
25 mm<br />
Extremely short hinge arm<br />
25 mm<br />
Slide-on system<br />
for easy assembly<br />
Height adjustment ± 1,5 mm<br />
at elongated holes in the mounting plate<br />
Integrated overlay<br />
and depth adjustment capability<br />
Concealed hinges Perfekt <strong>3.1.</strong>163
<strong>3.1.</strong>164<br />
Concealed hinges<br />
Perfekt 5737 W45/Perfekt 5224 W45<br />
for 45° face angle<br />
Perfekt 5737 W45<br />
• Self-closing hinge with slide-on attachment system and short hinge arm<br />
• For face frame cabinets.<br />
• For inset doors with hold-open feature<br />
• Cup diameter 35 mm<br />
• Opening angle 95°<br />
• With self-closing feature<br />
• Height adjustment via mounting plate ± 1,5 mm<br />
• Includes screw-on cross mounting plate with 4,2 mm ø oblong holes, 0 mm distance<br />
• Hinge/mounting plate: nickel-plated steel<br />
Cup version<br />
Cup T42<br />
Screw on<br />
Order no. PU<br />
0 069 597 1/10<br />
Cup version<br />
Cup T42/26<br />
Screw on<br />
Blind panel<br />
Concealed hinges Perfekt www.hettich.com<br />
Side<br />
W 45<br />
Mounting example<br />
25<br />
5<br />
Reveal 0,7 mm<br />
3,5 mm<br />
Adjustment<br />
2mm<br />
Perfekt 5224 W45<br />
• Self-closing hinge with slide-on attachment system and short hinge arm<br />
• For small cabinets with blind panels.<br />
• For inset doors with hold-open feature<br />
• Cup diameter 26 mm<br />
• Opening angle 95°<br />
• With self-closing feature<br />
• Height adjustment via mounting plate ± 1,5 mm<br />
• Includes screw-on cross mounting plate with 4.2 mm ø oblong holes, 0 mm distance<br />
• Hinge/mounting plate: nickel-plated steel<br />
Order no. PU<br />
0 069 599 1/10<br />
Side<br />
Blind panel<br />
ø35<br />
Mounting example<br />
25<br />
5,5<br />
Reveal 1 mm<br />
3,5 mm<br />
Adjustment<br />
2mm<br />
ø26<br />
12<br />
11,8<br />
Door<br />
Door<br />
1<br />
0,5
W 45<br />
! Cup<br />
Finishes Order no. PU<br />
high-gloss gold 0 040 340 1/50<br />
high-gloss chrome-plated 0 040 341 1/50<br />
black 0 070 051 1/50<br />
matt nickel-plated 0 070 712 1/50<br />
Self-closing glass-door hinge<br />
Perfekt 5204 W45<br />
for 45° face angle<br />
Perfekt 5204 W45<br />
• Self-closing glass-door hinge with slide-on attachment system and short hinge arm<br />
• For face frame cabinets.<br />
• For inset doors with hold-open feature<br />
• Cup diameter 26 mm<br />
• For glass-door thicknesses of 4 - 6,5 mm<br />
• Opening angle 95°<br />
• With self-closing feature<br />
• Height adjustment via mounting plate ± 1,5 mm<br />
• Includes screw-on cross mounting plate with 4,2 mm ø oblong holes, 0 mm distance<br />
• Hinge cup: black plastic<br />
• Hinge arm/mounting plate: nickel-plated steel<br />
Cup version Mounting example<br />
T1<br />
Screw on<br />
Order no. PU<br />
0 069 600 1/10<br />
Decorative cap A Decorative cap B<br />
Side<br />
Blind panel<br />
25<br />
5,5<br />
Reveal 0,5 mm<br />
3,5 mm<br />
Adjustment<br />
2 mm<br />
Finishes Order no. PU<br />
high-gloss gold 0 040 494 1/50<br />
high-gloss chrome-plated 0 040 495 1/50<br />
black 0 070 052 1/50<br />
matt nickel-plated 0 070 713 1/50<br />
+0,5<br />
ø26<br />
+0,2<br />
Glass door<br />
2,2<br />
Concealed hinges Perfekt <strong>3.1.</strong>165
<strong>3.1.</strong>166<br />
Concealed hinges<br />
Perfekt 5737 W90/Perfekt 5734 W90<br />
for 90° face angle<br />
Perfekt 5737 W90<br />
• Self-closing hinge with slide-on attachment system and short hinge arm<br />
• For face frame cabinets.<br />
• For inset doors with hold-open feature<br />
• Cup diameter 35 mm<br />
• Opening angle 95°<br />
• With self-closing feature<br />
• Height adjustment via mounting plate ± 1,5 mm<br />
• Includes screw-on cross mounting plate with 4,2 mm ø oblong holes, 0 mm distance<br />
• Hinge/mounting plate: nickel-plated steel<br />
Cup version<br />
Cup T42<br />
Screw on<br />
Order no. PU<br />
0 069 603 1/10<br />
Cup version<br />
Cup T42<br />
Screw on<br />
Mounting example<br />
Perfekt 5734 W90<br />
• Self-closing hinge with slide-on attachment system and short hinge arm<br />
• For face frame cabinets.<br />
• For overlay doors with hold-open feature<br />
• Cup diameter 35 mm<br />
• Opening angle 95°<br />
• With self-closing feature<br />
• Height adjustment via mounting plate ± 1,5 mm<br />
• Includes screw-on cross mounting plate with 4,2 mm ø oblong holes, 0 mm distance<br />
• Hinge/mounting plate: nickel-plated steel<br />
Order no. PU<br />
0 069 605 1/10<br />
Mounting example<br />
Concealed hinges Perfekt www.hettich.com<br />
Side<br />
Blind panel<br />
Side<br />
Blind panel<br />
W 90<br />
4<br />
Reveal 1,5 mm<br />
0,5 20<br />
min. 25<br />
min. 25<br />
5<br />
7<br />
Adjustment<br />
3,5 mm 2mm<br />
ø35<br />
11,8<br />
Adjustment<br />
3,5 mm 2mm<br />
ø35<br />
13<br />
Door<br />
Door
Decorative<br />
cap A<br />
W 90 W 90<br />
Order no. PU<br />
0 069 607 1/10<br />
Concealed hinges<br />
Perfekt 5224 W90/Perfekt 5204 W90<br />
for 90° face angle<br />
Perfekt 5224 W90<br />
• Self-closing hinge with slide-on attachment system and short hinge arm<br />
• For small cabinets with blind panels.<br />
• For inset doors with hold-open feature<br />
• Cup diameter 26 mm<br />
• Opening angle 95°<br />
• With self-closing feature<br />
• Height adjustment via mounting plate ± 1,5 mm<br />
• Includes screw-on cross mounting plate with 4,2 mm ø oblong holes, 0 mm distance<br />
• Hinge/mounting plate: nickel-plated steel<br />
Cup version<br />
Cup T42/26<br />
Screw on<br />
Order no. PU<br />
0 069 609 1/10<br />
Cup version<br />
Cup T1<br />
Screw on<br />
Finishes Order no. PU<br />
high-gloss gold 0 040 340 1/50<br />
high-gloss chrome-plated 0 040 341 1/50<br />
black 0 070 051 1/50<br />
matt nickel-plated 0 070 712 1/50<br />
Mounting example<br />
Perfekt 5204 W90<br />
• Self-closing glass-door hinge with slide-on attachment system and short hinge arm<br />
• For face frame cabinets.<br />
• For inset doors with hold-open feature<br />
• Cup diameter 26 mm<br />
• For glass-door thicknesses of 4 - 6,5 mm<br />
• Opening angle 95°<br />
• With self-closing feature<br />
• Height adjustment via mounting plate ± 1,5 mm<br />
• Includes screw-on cross mounting plate with 4,2 mm ø oblong holes, 0 mm distance<br />
• Hinge cup: black plastic<br />
• Hinge arm/mounting plate: nickel-plated steel<br />
Decorative<br />
cap B<br />
Side<br />
Blind panel<br />
Side<br />
Blind panel<br />
0,8<br />
5 ø26<br />
Reveal 2,2 mm<br />
Mounting example<br />
2<br />
5,5 +0,5<br />
Reveal 1 mm<br />
min. 25<br />
Adjustment<br />
3,5 mm 2 mm<br />
min. 25<br />
Concealed hinges Perfekt <strong>3.1.</strong>167<br />
12<br />
Door<br />
Adjustment<br />
3,5mm 2mm<br />
ø26 +0,2<br />
Glass door<br />
Finishes Order no. PU<br />
high-gloss gold 0 040 494 1/50<br />
high-gloss chrome-plated 0 040 495 1/50<br />
black 0 070 052 1/50<br />
matt nickel-plated 0 070 713 1/50
<strong>3.1.</strong>168<br />
Range summary/Technical comparison<br />
Single-pivot cup hinges<br />
Selekta Pro 2000<br />
Page number<br />
Selekta Pro 2000<br />
for single cabinet and storage<br />
wall construction<br />
19 mm sides/doors<br />
<strong>3.1.</strong>174 - <strong>3.1.</strong>175<br />
Corner hinge for single cabinet construction 230° 270°<br />
Corner hinge for cabinet and wall-to-wall design 230° –<br />
Twin hinge storage wall construction 180° –<br />
Side panel thickness mm 19 19<br />
Door thickness mm 19 19<br />
Door overlay mm 11/5,5 15/16<br />
Reveal mm 8 3/4<br />
Accessories • Silent System<br />
• Cover cap for hinge arm<br />
• Opening angle stop<br />
• Door buffer<br />
• Universal garment guard<br />
• Glass door cover cap<br />
Selekta Pro 2000<br />
For single cabinets<br />
19 mm sides/doors<br />
<strong>3.1.</strong>176 - <strong>3.1.</strong>177<br />
• Silent System<br />
• Cover cap for hinge arm<br />
• Opening angle stop<br />
• Door buffer<br />
• Universal garment guard<br />
• Glass door cover cap<br />
Single-pivot cup hinges Selekta Pro 2000 www.hettich.com
Selekta Pro 2000<br />
For single cabinets<br />
16 mm sides and<br />
16/19 mm doors<br />
<strong>3.1.</strong>178 - <strong>3.1.</strong>179<br />
Selekta Pro 2000<br />
for single cabinet and storage<br />
wall construction<br />
19 mm sides/doors<br />
<strong>3.1.</strong>180 - <strong>3.1.</strong>181<br />
Range summary/Technical comparison<br />
Single-pivot cup hinges<br />
Selekta Pro 2000<br />
Selekta Pro 2000 E<br />
for cabinet construction<br />
with 19 mm inset doors<br />
<strong>3.1.</strong>182 - <strong>3.1.</strong>183<br />
270° – 180° 115°<br />
– 230° – –<br />
– 180° – –<br />
16 19 19 19<br />
16/19 19 19 19<br />
12 6,5 – (inset door) 15<br />
4 12,5/6 3 4<br />
• Silent System<br />
• Cover cap for hinge arm<br />
• Opening angle stop<br />
• Door buffer<br />
• Universal garment guard<br />
• Glass door cover cap<br />
• Silent System<br />
• Cover cap for hinge arm<br />
• Opening angle stop<br />
• Door buffer<br />
• Universal garment guard<br />
• Glass door cover cap<br />
• Silent System<br />
• Cover cap for hinge arm<br />
• Opening angle stop<br />
• Universal garment guard<br />
• Glass door cover cap<br />
Selekta Pro 2035<br />
For single cabinets<br />
19 mm sides/doors<br />
<strong>3.1.</strong>184 - <strong>3.1.</strong>185<br />
• Silent System<br />
• Cover cap for hinge arm<br />
• Door buffer<br />
• Universal garment guard<br />
• Glass door cover cap<br />
Single-pivot cup hinges Selekta Pro 2000 <strong>3.1.</strong>169
<strong>3.1.</strong>170<br />
Single-pivot cup hinges<br />
Selekta Pro 2000<br />
Masterfully designed hinges for<br />
office and commercial furniture<br />
Single-pivot hinge for snap-on attachment<br />
Eccentric overlay adjustment<br />
for perfect gap alignment<br />
Selekta Pro 2000 – the hinge range for all applications<br />
Corner hinge<br />
for cabinet construction,<br />
overlay door,<br />
visible knuckle<br />
Twin hinge for<br />
wall-to-wall construction,<br />
overlay door,<br />
visible knuckle<br />
With or without self-closing feature<br />
Hinge cup<br />
with rim<br />
Corner hinge<br />
for cabinet construction,<br />
inset door,<br />
visible knuckle<br />
Corner hinge<br />
for cabinet construction,<br />
overlay door,<br />
without knuckle<br />
Single-pivot cup hinges Selekta Pro 2000 www.hettich.com
External pivot point:<br />
Opening angle up to 270°<br />
for perfect access<br />
Tested quality<br />
Drill hole<br />
for 3rd fixing screw<br />
Hinge cup<br />
and hinge arm in<br />
precision nickel-plated die-cast zinc<br />
Silent System – Perfectly controlled dampening<br />
Closes furniture doors quietly and gently.<br />
Screw-mounts on door side so that full use can be<br />
made of cabinet interior.<br />
Single-pivot cup hinges<br />
Selekta Pro 2000<br />
Eccentric height adjustment<br />
Exact door depth alignment<br />
– without loosening screws<br />
Fast assambly<br />
with premounted oval head screws<br />
Expanding dowel<br />
for System 32 hole line<br />
(System 25 available on request)<br />
Optimum use of storage space<br />
– no door protrusion and side panel<br />
in ultra-flat design<br />
Single-pivot cup hinges Selekta Pro 2000 <strong>3.1.</strong>171
<strong>3.1.</strong>172<br />
Technical information<br />
Single-pivot cup hinges<br />
Selekta Pro 2000<br />
Door heights<br />
up to 2400<br />
up to 2000<br />
up to1600<br />
up to 900<br />
2<br />
A<br />
C<br />
C<br />
Door width up to 600<br />
X<br />
3<br />
4<br />
A<br />
5<br />
B<br />
B<br />
min. 90 mm<br />
Door adjustment Selekta Pro 2000/Selekta Pro 2000 E<br />
• Overlay adjustment<br />
Turn eccentric screw (A) to right, the overlay<br />
can be reduced max. -2 mm<br />
• Eccentric height adjustment (± 2 mm)<br />
Turn eccentric screw (B) to right or left to lower<br />
or raise the door height.<br />
Then drive in chipboard countersunk screw (C)<br />
ø 4 x 16 mm<br />
Door adjustment Selekta Pro 2035<br />
• Overlay adjustment<br />
Unscrew fixing screw (B). Screw in adjustment<br />
screw (A), the door overlay can be reduced<br />
by up to 2 mm.<br />
Overlay adjustment is possible without complete<br />
removal of the fixing screw.<br />
• Eccentric height adjustment (Δ 2 mm)<br />
Turn eccentric screw (B) to right or left to lower<br />
or raise the door height.<br />
Then drive in chipboard countersunk screw (C)<br />
ø 3,5 x 20 mm.<br />
Number of hinges per door:<br />
Door width, door height, door weight plus<br />
material quality of the door are key factors for<br />
determining the required number of hinges.<br />
In practice, these factors are very variable.<br />
The numbers given in the diagram are for<br />
reference only. A trial mounting is recommended<br />
if in doubt. For stability, the distance between hinges<br />
should be chosen as large as possible.<br />
X = distance between two hinges<br />
(Guide values for 19 mm chipboard panels with a<br />
density of 750 kg/m3 )<br />
Single-pivot cup hinges Selekta Pro 2000 www.hettich.com<br />
i
Mounting position with<br />
15 or 16 mm door overlay<br />
55<br />
Mounting position with<br />
5,5 or 6,5 mm door overlay<br />
55<br />
32<br />
37,8<br />
ø35<br />
32 28,3<br />
ø35<br />
18,3<br />
8,8<br />
Screw-on door buffer Silent System<br />
for Selekta Pro 2000/2035 single-pivot cup hinges<br />
• Suitable for overlay and inset doors<br />
• Simply screw-mounts to the door<br />
• Dampening effect infinitely adjustable at setting wheel<br />
• Can be retrofitted<br />
• Nickel-plated die-cast zinc<br />
Application for screw-on door buffer Silent System<br />
Hinge Door overlay mm<br />
Selekta Pro 2000 5,5/6,5/11/12/15/16<br />
Selekta Pro 2000 E – (inset door)<br />
Selekta Pro 2035 15<br />
Order no. PU<br />
0 060 580 1/50<br />
Mounting position with<br />
11 or 12 mm door overlay<br />
55<br />
Mounting position with<br />
inset door<br />
55<br />
32 33,8<br />
32 21,8<br />
ø35<br />
ø35<br />
2,3<br />
14,3<br />
> 1000 mm<br />
Assembly<br />
�<br />
�<br />
Recommended number<br />
of buffers per door<br />
> 1000 mm<br />
< 1000 mm mm<br />
1<br />
1<br />
Single-pivot cup hinges Selekta Pro 2000 <strong>3.1.</strong>173<br />
2<br />
2
<strong>3.1.</strong>174<br />
Single-pivot cup hinge Selekta Pro 2000 for<br />
cabinet and wall-to-wall construction with 19 mm sides/doors<br />
Opening angle 180°/230°<br />
Hinge versions<br />
Knuckle flush<br />
Knuckle central<br />
Knuckle central<br />
Silent System, see page <strong>3.1.</strong>173<br />
Selekta Pro 2000 for 25 hole line on request<br />
Glass door cover cap, see page <strong>3.1.</strong>86<br />
7<br />
Single-pivot cup hinges Selekta Pro 2000 www.hettich.com<br />
180°/<br />
230°<br />
• Single pivot hinge with snap-on assembly<br />
• With visible knuckle<br />
• Hole line 32 mm<br />
• 35 mm cup diameter, 11 or 5,5 mm door overlay, 7 mm knuckle diameter,<br />
39 mm knuckle length<br />
• Separate mounting of cup and hinge arm<br />
• Hinge arm with expanding dowel and pre-mounted pan-head screws<br />
• Fast-assembly of doors via snap-on attachment, without tools.<br />
High degree of protection against unintentional detachment:<br />
The lock can only be released with a screwdriver.<br />
• No door protrusion at an opening angle of 180°<br />
or greater, leaving interior free for drawers.<br />
• Eccentric overlay adjustment - 2 mm<br />
• Eccentric height adjustment ±2 mm<br />
• Hinge cup/arm: Precision die-cast zinc nickel-plated<br />
Mounting options Article/Order no.<br />
Hinge arm Selekta Pro 2000 (order cups separately, see page <strong>3.1.</strong>175)<br />
7<br />
19<br />
19<br />
19<br />
7<br />
19<br />
19<br />
19<br />
Selekta Pro 2000<br />
hinge = hinge arm + cup<br />
Corner hinge for single cabinet<br />
construction<br />
• Door overlay 11 mm<br />
• Opening angle 230°<br />
with self-closing without self-closing<br />
0 045 065 0 045 057<br />
Corner hinge for storage wall<br />
and cabinet construction<br />
• Door overlay 5,5 mm<br />
• Opening angle 230°<br />
with self-closing without self-closing<br />
0 045 066 0 045 058<br />
Twin hinge storage wall<br />
construction<br />
• Door overlay 5,5 mm<br />
• Opening angle 180°<br />
with self-closing without self-closing<br />
0 045 067 0 045 059<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
PU<br />
1/50
Mounting examples<br />
21,2<br />
37<br />
21,2<br />
37<br />
21,2<br />
Side<br />
ø5<br />
Side<br />
ø5<br />
7<br />
7<br />
Side<br />
37<br />
ø5<br />
19<br />
19<br />
11<br />
11<br />
7,8<br />
19<br />
11<br />
Chipboard<br />
countersunk<br />
screw<br />
5,3<br />
1,2<br />
7,8<br />
13<br />
19<br />
Auflage Overlay max. 11 mm<br />
Auflagenverstellung<br />
Overlay adjustment<br />
max. 2 -2 mm über with Exzenter eccentric screw<br />
7,8<br />
Chipboard<br />
countersunk<br />
screw<br />
5,3<br />
1,2<br />
13<br />
19<br />
Auflage Overlay max. 5,5 mm<br />
Overlay Auflagenverstellung adjustment<br />
max. 2 -2 mm über with Exzenter eccentric screw<br />
Chipboard<br />
countersunk<br />
screw<br />
5,3<br />
1,2<br />
13<br />
Door<br />
Door<br />
Overlay max. 5,5 mm<br />
7<br />
Overlay adjustment Overlay adjustment<br />
max. -2 mm min. 8 max. -2 mm<br />
with eccentric screw Reveal with eccentric crew<br />
Single-pivot cup hinge Selekta Pro 2000 for<br />
cabinet and wall-to-wall construction with 19 mm sides/doors<br />
Opening angle 180°/230°<br />
Cup T22 Cup T23 Cup T22/9 Cup T23/9 Cup TB 22 Cup TB 23<br />
Screw-on Press-in Screw-on Press-in Screw-on Press-in<br />
Order no. PU<br />
0 077 734 1/50<br />
52<br />
ø35<br />
12,5 ø35<br />
5,5<br />
T22 hole dimensions<br />
5,5<br />
Order no. PU<br />
0 077 735 1/50<br />
T23 hole dimensions<br />
12,5<br />
ø35<br />
ø35<br />
52<br />
19<br />
5,5<br />
11<br />
ø10<br />
5,5<br />
T22/9 hole dimensions T23/9 hole dimensions<br />
12,5 ø35<br />
52<br />
ø35<br />
9<br />
9<br />
13 deep 13 deep 13 deep 13 deep 13 deep 13 deep<br />
52<br />
52<br />
ø10x11<br />
52<br />
52<br />
ø10x11<br />
45<br />
45<br />
Pre-mounted<br />
screw<br />
Pre-mounted<br />
screw<br />
Pre-mounted screw<br />
Order no. PU<br />
0 077 736 1/50<br />
Order no. PU<br />
0 077 887 1/50<br />
11<br />
ø10<br />
12,5<br />
ø35<br />
52<br />
ø35<br />
Hinge-cup fixing screw<br />
ø 3,5 x 16 mm<br />
• For T22, T22/9 and TB 22 cups<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 071 925 200<br />
Chipboard countersunk screw<br />
ø 4 x 16 mm<br />
• For fixing hinge arm<br />
(3rd fixing screw)<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 010 085 200<br />
9<br />
9<br />
Order no. PU<br />
0 010 074 1/50<br />
TB 22 hole dimensions<br />
12,5<br />
ø35<br />
45<br />
ø35<br />
Opening angle stop 90°/115°<br />
• Includes fixing screws<br />
• Nickel-plated steel<br />
Door buffer Selekta Pro 2000<br />
• For drilling diameter 8 mm<br />
• Plastic<br />
9,5<br />
9,5<br />
Order no. PU<br />
0 077 942 1/50<br />
TB 23 hole dimensions<br />
12,5<br />
ø8x11<br />
Single-pivot cup hinges Selekta Pro 2000 <strong>3.1.</strong>175<br />
11<br />
ø8<br />
Cover cap for hinge arm<br />
• Silver-grey plastic<br />
ø35<br />
Order no. PU<br />
0 010 067 1/50<br />
Universal opening angle stop<br />
• Infinitely adjustable to 120°<br />
• Flexible strap in<br />
synthetic material<br />
Order no. PU<br />
9 079 379 1/50<br />
Finishes Order no. PU<br />
white/transparent 0 045 151 1/100<br />
grey/transparent 0 045 152 1/100<br />
45<br />
ø35<br />
Opening angle Order no. PU<br />
90° 0 043 039 1/50<br />
115° 0 043 052 1/50<br />
Universal garment guard<br />
• Prevents garments from<br />
becoming trapped<br />
• White plastic<br />
Order no. PU<br />
9 079 380 1/100<br />
9,5<br />
9,5
<strong>3.1.</strong>176<br />
Single-pivot cup hinge Selekta Pro 2000 for<br />
cabinet construction with 19 mm sides/doors<br />
Opening angle 270°<br />
Hinge versions<br />
Knuckle flush<br />
Knuckle flush<br />
Single-pivot cup hinges Selekta Pro 2000 www.hettich.com<br />
270°<br />
• Single pivot hinge with snap-on assembly<br />
• With visible knuckle<br />
• Hole line 32 mm<br />
• 35 mm cup diameter, 15 or 16 mm door overlay,<br />
5,4 mm knuckle diameter, 39 mm knuckle length<br />
• Separate mounting of cup and hinge arm<br />
• Hinge arm with expanding dowel and pre-mounted pan-head screws<br />
• Fast-assembly of doors via snap-on attachment, without tools.<br />
High degree of protection against unintentional detachment:<br />
The lock can only be released with a screwdriver.<br />
• No door protrusion at an opening angle of 180° or greater,<br />
leaving interior free for drawers.<br />
• Eccentric overlay adjustment - 2 mm<br />
• Eccentric height adjustment ±2 mm<br />
• Hinge cup/arm: Precision die-cast zinc nickel-plated<br />
Mounting options Article/Order no.<br />
Hinge arm Selekta Pro 2000 (order cups separately, see page <strong>3.1.</strong>177)<br />
5,4<br />
5,4<br />
Silent System, see page <strong>3.1.</strong>173<br />
Selekta Pro 2000 for 25 hole line on request<br />
Glass door cover cap, see page <strong>3.1.</strong>186<br />
19<br />
19<br />
19<br />
19<br />
Selekta Pro 2000<br />
hinge = hinge arm + cup<br />
Corner hinge for single cabinet<br />
construction<br />
• Door overlay 15 mm<br />
• Opening angle 270°<br />
with self-closing without self-closing<br />
0 045 044 0 045 049<br />
Corner hinge for single<br />
cabinet construction<br />
• Door overlay 16 mm<br />
• Opening angle 270°<br />
with self-closing without self-closing<br />
0 045 045 0 045 051<br />
PU<br />
1/50<br />
PU<br />
1/50
Cup T22/9 Cup T23/9 Cup TB 22 Cup TB 23<br />
Screw-on Press-in Screw-on Press-in<br />
Order no. PU<br />
0 077 736 1/50<br />
12,5 ø35<br />
52<br />
ø35<br />
13 deep<br />
52<br />
Mounting examples<br />
9<br />
9<br />
Order no. PU<br />
0 077 887 1/50<br />
11<br />
ø10<br />
12,5<br />
ø35<br />
52<br />
ø35<br />
13 deep<br />
52<br />
9<br />
9<br />
T22/9 hole dimensions T23/9 hole dimensions TB 22 hole dimensions TB 23 hole dimensions<br />
23,5<br />
Side<br />
37<br />
ø5<br />
Side<br />
37<br />
23,5<br />
5,4<br />
ø5<br />
5,4<br />
19<br />
11<br />
19<br />
7,8<br />
Chipboard<br />
countersunk<br />
screw<br />
5,3<br />
1,2<br />
13<br />
19<br />
ø10x11<br />
Overlay max. 15 15 mm<br />
Overlay max. 2 adjustment<br />
max. -2 mm with eccentric screw<br />
11<br />
7,8<br />
Pre-mounted<br />
screw<br />
Pre-mounted<br />
screw<br />
Chipboard<br />
countersunk<br />
screw<br />
5,3<br />
1,2<br />
13<br />
19<br />
Door<br />
Door<br />
Overlay max. 16 16 mm<br />
Overlay max. 2 adjustment<br />
max. -2 mm with eccentric screw<br />
Order no. PU<br />
0 010 074 1/50<br />
12,5<br />
ø35<br />
45<br />
ø35<br />
13 deep<br />
45<br />
9,5<br />
9,5<br />
Single-pivot cup hinge Selekta Pro 2000 for<br />
cabinet construction with 19 mm sides/doors<br />
Opening angle 270°<br />
Order no. PU<br />
0 077 942 1/50<br />
11<br />
ø8<br />
12,5<br />
ø35<br />
45<br />
ø35<br />
13 deep<br />
45<br />
Hinge-cup fixing screw<br />
ø 3,5 x 16 mm<br />
• For T22, T22/9 and TB 22 cups<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 071 925 200<br />
Chipboard countersunk screw<br />
ø 4 x 16 mm<br />
• For fixing hinge arm<br />
(3rd fixing screw)<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 010 085 200<br />
9,5<br />
9,5<br />
ø8x11<br />
Opening angle stop 90°/115°<br />
• Includes fixing screws<br />
• Nickel-plated steel<br />
Door buffer Selekta Pro 2000<br />
• For drilling diameter 8 mm<br />
• Plastic<br />
Cover cap for hinge arm<br />
• Silver-grey plastic<br />
Order no. PU<br />
0 010 067 1/50<br />
Universal opening angle stop<br />
• Infinitely adjustable to 120°<br />
• Flexible strap in<br />
synthetic material<br />
Order no. PU<br />
9 079 379 1/50<br />
Opening angle Order no. PU<br />
90° 0 043 039 1/50<br />
115° 0 043 052 1/50<br />
Finishes Order no. PU<br />
white/transparent 0 045 151 1/100<br />
grey/transparent 0 045 152 1/100<br />
Universal garment guard<br />
• Prevents garments from<br />
becoming trapped<br />
• White plastic<br />
Order no. PU<br />
9 079 380 1/100<br />
Single-pivot cup hinges Selekta Pro 2000 <strong>3.1.</strong>177
<strong>3.1.</strong>178<br />
Single-pivot cup hinge Selekta Pro 2000 for<br />
cabinet construction with 16 mm sides and 16/19 mm doors<br />
Opening angle 270°<br />
Hinge versions<br />
Knuckle flush<br />
Knuckle flush<br />
Single-pivot cup hinges Selekta Pro 2000 www.hettich.com<br />
270°<br />
• Single pivot hinge with snap-on assembly<br />
• With visible knuckle<br />
• Hole line 32 mm<br />
• 35 mm cup diameter, 12 mm door overlay, 5,4 mm knuckle diameter,<br />
39 mm knuckle length<br />
• Separate mounting of cup and hinge arm<br />
• Hinge arm with expanding dowel and pre-mounted pan-head screws<br />
• Fast-assembly of doors via snap-on attachment, without tools.<br />
High degree of protection against unintentional detachment:<br />
The lock can only be released with a screwdriver.<br />
• No door protrusion at an opening angle of 180° or greater,<br />
leaving interior free for drawers.<br />
• Eccentric overlay adjustment - 2 mm<br />
• Eccentric height adjustment ±2 mm<br />
• Hinge cup/arm: Precision die-cast zinc nickel-plated<br />
Mounting options Article/Order no.<br />
Hinge arm Selekta Pro 2000 (order cups separately, see page <strong>3.1.</strong>179)<br />
5,4<br />
5,4<br />
Silent System, see page <strong>3.1.</strong>173<br />
Selekta Pro 2000 for 25 hole line on request<br />
Glass door cover cap, see page <strong>3.1.</strong>186<br />
16<br />
16<br />
16<br />
19<br />
Selekta Pro 2000<br />
hinge = hinge arm + cup<br />
Corner hinge for single cabinet<br />
construction<br />
• Door overlay 12 mm<br />
• Opening angle 270°<br />
with self-closing without self-closing<br />
0 045 046 0 045 052<br />
Corner hinge for single<br />
cabinet construction<br />
• Door overlay 12 mm<br />
• Opening angle 270°<br />
with self-closing without self-closing<br />
0 045 047 0 045 053<br />
PU<br />
1/50<br />
PU<br />
1/50
Mounting examples<br />
Single-pivot cup hinge Selekta Pro 2000 for<br />
cabinet construction with 16 mm sides and 16/19 mm doors<br />
Opening angle 270°<br />
Cup T22 Cup T23 Cup T22/9 Cup T23/9 Cup TB 22 Cup TB 23<br />
Screw-on Press-in Screw-on Press-in Screw-on Press-in<br />
Order no. PU<br />
0 077 734 1/50<br />
52<br />
ø35<br />
T22 hole dimensions<br />
12,5 ø35<br />
37<br />
20,5<br />
37<br />
23,5<br />
5,5<br />
5,5<br />
Order no. PU<br />
0 077 735 1/50<br />
T23 hole dimensions<br />
12,5<br />
ø35<br />
ø35<br />
52<br />
5,5<br />
11<br />
ø10<br />
5,5<br />
Order no. PU<br />
0 077 736 1/50<br />
T22/9 hole dimensions T23/9 hole dimensions<br />
12,5 ø35<br />
52<br />
ø35<br />
9<br />
9<br />
Order no. PU<br />
0 077 887 1/50<br />
13 deep 13 deep 13 deep 13 deep 13 deep 13 deep<br />
52<br />
52<br />
ø10x11<br />
52<br />
52<br />
ø10x11<br />
45<br />
45<br />
Side<br />
ø5<br />
5,4<br />
Side<br />
ø5<br />
5,4<br />
16<br />
16<br />
11<br />
11<br />
7,8<br />
Chipboard<br />
countersunk<br />
screw<br />
5,3<br />
1,2<br />
13<br />
16<br />
Overlay max. 12 12 mm<br />
Overlay max. 2 adjustment<br />
max. -2 mm with eccentric screw<br />
7,8<br />
Pre-mounted<br />
screw<br />
Pre-mounted<br />
screw<br />
Chipboard<br />
countersunk<br />
screw<br />
5,3<br />
1,2<br />
13<br />
19<br />
Door<br />
Door<br />
Overlay max. 12 12 mm<br />
Overlay max. 2 adjustment<br />
max. -2 mm with eccentric screw<br />
11<br />
ø10<br />
12,5<br />
ø35<br />
52<br />
ø35<br />
Hinge-cup fixing screw<br />
ø 3,5 x 16 mm<br />
• For T22, T22/9 and TB 22 cups<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 071 925 200<br />
Chipboard countersunk screw<br />
ø 4 x 16 mm<br />
• For fixing hinge arm<br />
(3rd fixing screw)<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 010 085 200<br />
9<br />
9<br />
Order no. PU<br />
0 010 074 1/50<br />
TB 22 hole dimensions<br />
12,5<br />
ø35<br />
45<br />
ø35<br />
Opening angle stop 90°/115°<br />
• Includes fixing screws<br />
• Nickel-plated steel<br />
Door buffer Selekta Pro 2000<br />
• For drilling diameter 8 mm<br />
• Plastic<br />
9,5<br />
9,5<br />
Order no. PU<br />
0 077 942 1/50<br />
TB 23 hole dimensions<br />
12,5<br />
ø8x11<br />
Single-pivot cup hinges Selekta Pro 2000 <strong>3.1.</strong>179<br />
11<br />
ø8<br />
Cover cap for hinge arm<br />
• Silver-grey plastic<br />
ø35<br />
Order no. PU<br />
0 010 067 1/50<br />
Universal opening angle stop<br />
• Infinitely adjustable to 120°<br />
• Flexible strap in<br />
synthetic material<br />
Order no. PU<br />
9 079 379 1/50<br />
Finishes Order no. PU<br />
white/transparent 0 045 151 1/100<br />
grey/transparent 0 045 152 1/100<br />
45<br />
ø35<br />
Opening angle Order no. PU<br />
90° 0 043 039 1/50<br />
115° 0 043 052 1/50<br />
Universal garment guard<br />
• Prevents garments from<br />
becoming trapped<br />
• White plastic<br />
Order no. PU<br />
9 079 380 1/100<br />
9,5<br />
9,5
<strong>3.1.</strong>180<br />
Single-pivot cup hinge Selekta Pro 2000 for<br />
cabinet and wall-to-wall construction with 19 mm sides/doors<br />
Opening angle 180°/230°<br />
Hinge versions<br />
Knuckle central<br />
Knuckle central<br />
• Single pivot hinge with snap-on assembly<br />
• With visible knuckle<br />
• Hole line 32 mm<br />
• 35 mm cup diameter, 6.5 mm door overlay, 5,4 mm knuckle diameter,<br />
39 mm knuckle length<br />
• Separate mounting of cup and hinge arm<br />
• Hinge arm with expanding dowel and pre-mounted pan-head screws<br />
• Fast-assembly of doors via snap-on attachment, without tools.<br />
High degree of protection against unintentional detachment:<br />
The lock can only be released with a screwdriver.<br />
• No door protrusion at an opening angle of 180° or greater,<br />
leaving interior free for drawers.<br />
• Eccentric overlay adjustment - 2 mm<br />
• Eccentric height adjustment ±2 mm<br />
• Hinge cup/arm: Precision die-cast zinc nickel-plated<br />
Mounting options Article/Order no.<br />
Hinge arm Selekta Pro 2000 (order cups separately, see page <strong>3.1.</strong>181)<br />
5,4<br />
19<br />
5,4<br />
Silent System, see page <strong>3.1.</strong>173<br />
Selekta Pro 2000 for 25 hole line on request<br />
Glass door cover cap, see page <strong>3.1.</strong>186<br />
19<br />
19<br />
19<br />
Selekta Pro 2000<br />
hinge = hinge arm + cup<br />
Corner hinge for storage wall and<br />
cabinet construction<br />
• Door overlay 6,5 mm<br />
• Opening angle 230°<br />
with self-closing without self-closing<br />
0 045 048 0 045 054<br />
Twin hinge storage wall<br />
construction<br />
• Door overlay 6,5 mm<br />
• Opening angle 180°<br />
with self-closing without self-closing<br />
0 045 063 0 045 055<br />
Single-pivot cup hinges Selekta Pro 2000 www.hettich.com<br />
PU<br />
1/50<br />
PU<br />
1/50<br />
180°/<br />
230°
Mounting examples<br />
Single-pivot cup hinge Selekta Pro 2000 for<br />
cabinet and wall-to-wall construction with 19 mm sides/doors<br />
Opening angle 180°/230°<br />
Cup T22 Cup T23 Cup T22/9 Cup T23/9 Cup TB 22 Cup TB 23<br />
Screw-on version Press-in Screw-on Press-in Screw-on Press-in<br />
Order no. PU<br />
0 077 734 1/50<br />
52<br />
ø35<br />
T22 hole dimensions<br />
12,5 ø35<br />
37<br />
21,2<br />
Door 21,2<br />
5,5<br />
5,5<br />
Order no. PU<br />
0 077 735 1/50<br />
T23 hole dimensions<br />
12,5<br />
ø35<br />
ø35<br />
52<br />
5,5<br />
11<br />
ø10<br />
5,5<br />
Order no. PU<br />
0 077 736 1/50<br />
T22/9 hole dimensions T23/9 hole dimensions<br />
12,5 ø35<br />
52<br />
ø35<br />
9<br />
9<br />
Order no. PU<br />
0 077 887 1/50<br />
13 deep 13 deep 13 deep 13 deep 13 deep 13 deep<br />
52<br />
52<br />
ø10x11<br />
52<br />
52<br />
ø10x11<br />
45<br />
45<br />
Side<br />
ø5<br />
5,4<br />
19<br />
37<br />
11<br />
ø5<br />
7,8<br />
Chipboard<br />
countersunk<br />
screw<br />
5,3<br />
1,2<br />
13<br />
19<br />
max. Overlay 6,5 6,5 mm<br />
max. Overlay 2 adjustment<br />
max. -2 mm with eccentric screw<br />
Side<br />
Pre-mounted<br />
screw<br />
19<br />
11<br />
7,8<br />
Pre-mounted<br />
screw<br />
Chipboard<br />
countersunk<br />
screw<br />
5,3<br />
5,4 max. Overlay 6,5 6,5 mm<br />
Overlay adjustment max. 2 max. Overlay 2 adjustment<br />
max. -2 mm with<br />
eccentric screw<br />
min. 6<br />
Reveal<br />
max. -2 mm with<br />
eccentric screw<br />
13<br />
Door<br />
1,2<br />
19<br />
11<br />
ø10<br />
12,5<br />
ø35<br />
52<br />
ø35<br />
Hinge-cup fixing screw<br />
ø 3,5 x 16 mm<br />
• For T22, T22/9 and TB 22 cups<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 071 925 200<br />
Chipboard countersunk screw<br />
ø 4 x 16 mm<br />
• For fixing hinge arm<br />
(3rd fixing screw)<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 010 085 200<br />
9<br />
9<br />
Order no. PU<br />
0 010 074 1/50<br />
TB 22 hole dimensions<br />
12,5<br />
ø35<br />
45<br />
ø35<br />
Opening angle stop 90°/115°<br />
• Includes fixing screws<br />
• Nickel-plated steel<br />
Door buffer Selekta Pro 2000<br />
• For drilling diameter 8 mm<br />
• Plastic<br />
9,5<br />
9,5<br />
Order no. PU<br />
0 077 942 1/50<br />
TB 23 hole dimensions<br />
12,5<br />
ø8x11<br />
Single-pivot cup hinges Selekta Pro 2000 <strong>3.1.</strong>181<br />
11<br />
ø8<br />
Cover cap for hinge arm<br />
• Silver-grey plastic<br />
ø35<br />
Order no. PU<br />
0 010 067 1/50<br />
Universal opening angle stop<br />
• Infinitely adjustable to 120°<br />
• Flexible strap in<br />
synthetic material<br />
Order no. PU<br />
9 079 379 1/50<br />
Finishes Order no. PU<br />
white/transparent 0 045 151 1/100<br />
grey/transparent 0 045 152 1/100<br />
45<br />
ø35<br />
Opening angle Order no. PU<br />
90° 0 043 039 1/50<br />
115° 0 043 052 1/50<br />
Universal garment guard<br />
• Prevents garments from<br />
becoming trapped<br />
• White plastic<br />
Order no. PU<br />
9 079 380 1/100<br />
9,5<br />
9,5
<strong>3.1.</strong>182<br />
Single-pivot cup hinge Selekta Pro 2000 E for<br />
inset doors, cabinet construction with 19 mm sides/doors<br />
Opening angle 180°<br />
Hinge versions<br />
Inset door<br />
• Single pivot hinge with snap-on assembly<br />
• With visible knuckle<br />
• Hole line 32 mm<br />
• 35 mm cup diameter, 5,4 mm knuckle diameter, 39 mm knuckle length<br />
• Separate mounting of cup and hinge arm.<br />
• Hinge arm with expanding dowel and pre-mounted pan-head screws<br />
• Fast-assembly of doors via snap-on attachment, without tools.<br />
High degree of protection against unintentional detachment:<br />
The lock can only be released with a screwdriver.<br />
• No door protrusion at an opening angle of 180° or greater,<br />
leaving interior free for drawers.<br />
• Eccentric reveal adjustment - 2 mm (min. reveal 3,2 mm)<br />
• Eccentric height adjustment ±2 mm<br />
• Hinge cup/arm: Precision die-cast zinc nickel-plated<br />
Mounting options Article/Order no.<br />
Hinge arm Selekta Pro 2000 E (order cups separately, see page <strong>3.1.</strong>183)<br />
5,4<br />
Silent System, see page <strong>3.1.</strong>173<br />
Selekta Pro 2000 for 25 hole line on request<br />
Glass door cover cap, see page <strong>3.1.</strong>186<br />
19<br />
19<br />
Selekta Pro 2000 E<br />
hinge = hinge arm + cup<br />
Corner hinge for single<br />
cabinet construction<br />
• Opening angle 180°<br />
with self-closing without self-closing<br />
0 045 064 0 045 056<br />
Single-pivot cup hinges Selekta Pro 2000 www.hettich.com<br />
PU<br />
1/50<br />
180°
Mounting examples<br />
Single-pivot cup hinge Selekta Pro 2000 E for<br />
inset doors, cabinet construction with 19 mm sides/doors<br />
Opening angle 180°<br />
Cup T22 Cup T23 Cup T22/9 Cup T23/9 Cup TB 22 Cup TB 23<br />
Screw-on version Press-in Screw-on Press-in Screw-on Press-in<br />
Order no. PU<br />
0 077 734 1/50<br />
T22 hole dimensions<br />
12,5 ø35<br />
Side<br />
52<br />
ø35<br />
5,5<br />
5,5<br />
T23 hole dimensions<br />
12,5<br />
ø35<br />
ø35<br />
52<br />
5,5<br />
11<br />
ø10<br />
5,5<br />
T22/9 hole dimensions T23/9 hole dimensions<br />
12,5 ø35<br />
52<br />
ø35<br />
9<br />
9<br />
13 deep 13 deep 13 deep 13 deep 13 deep 13 deep<br />
52<br />
52<br />
ø10x11<br />
52<br />
52<br />
ø10x11<br />
45<br />
45<br />
19 15,1<br />
ø5<br />
5,4<br />
11<br />
7,8<br />
Order no. PU<br />
0 077 735 1/50<br />
Pre-mounted screw<br />
Chipboard<br />
countersunk<br />
screw 37<br />
5,3<br />
1,2<br />
13<br />
19<br />
Door<br />
min. min. reveal 3,2 3,2 mm<br />
Reveal max. adjustment 2 max. -2 mm<br />
with eccentric screw<br />
Order no. PU<br />
0 077 736 1/50<br />
Order no. PU<br />
0 077 887 1/50<br />
11<br />
ø10<br />
12,5<br />
ø35<br />
52<br />
ø35<br />
Hinge-cup fixing screw<br />
ø 3,5 x 16 mm<br />
• For T22, T22/9 and TB 22 cups<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 071 925 200<br />
Chipboard countersunk screw<br />
ø 4 x 16 mm<br />
• For fixing hinge arm<br />
(3rd fixing screw)<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 010 085 200<br />
Universal garment guard<br />
• Prevents garments from<br />
becoming trapped<br />
• White plastic<br />
Order no. PU<br />
9 079 380 1/100<br />
9<br />
9<br />
Order no. PU<br />
0 010 074 1/50<br />
TB 22 hole dimensions<br />
12,5<br />
ø35<br />
45<br />
ø35<br />
9,5<br />
9,5<br />
Order no. PU<br />
0 077 942 1/50<br />
TB 23 hole dimensions<br />
12,5<br />
ø8x11<br />
Single-pivot cup hinges Selekta Pro 2000 <strong>3.1.</strong>183<br />
11<br />
ø8<br />
Cover cap for hinge arm<br />
• Silver-grey plastic<br />
ø35<br />
Order no. PU<br />
0 010 067 1/50<br />
Universal opening angle stop<br />
• Infinitely adjustable to 120°<br />
• Flexible strap in<br />
synthetic material<br />
Order no. PU<br />
9 079 379 1/50<br />
45<br />
ø35<br />
9,5<br />
9,5
<strong>3.1.</strong>184<br />
Single-pivot cup hinge Selekta Pro 2035 invisible<br />
from the front, for cabinet construction with 19 mm sides/doors<br />
Opening angle 115°<br />
Hinge versions<br />
Without knuckle<br />
Twin-mounting<br />
without knuckle<br />
Silent System, see page <strong>3.1.</strong>173<br />
Selekta Pro 2000 for 25 hole line on request<br />
Glass door cover cap, see page <strong>3.1.</strong>186<br />
• Single pivot hinge with snap-on assembly<br />
• Hole line 32 mm<br />
• 35 mm cup diameter, 15 mm door overlay<br />
• Separate mounting of cup and hinge arm<br />
• Hinge arm with expanding dowel and pre-mounted pan-head screws<br />
• Fast-assembly of doors via snap-on attachment, without tools.<br />
High degree of protection against unintentional detachment:<br />
The lock can only be released with a screwdriver.<br />
• No door protrusion from opening angles of 90° and over, leaving interior<br />
unobstructed for pull out elements<br />
• Eccentric overlay adjustment - 2 mm<br />
• Eccentric height adjustment ±2 mm<br />
• Hinge cup/arm: Precision die-cast zinc nickel-plated<br />
Mounting options Article/Order no.<br />
Hinge arm Selekta Pro 2035 (order cups separately, see page <strong>3.1.</strong>185)<br />
R3<br />
19<br />
19<br />
19<br />
19<br />
19<br />
Selekta Pro 2035<br />
hinge = hinge arm + cup<br />
Corner hinge for single cabinet<br />
construction<br />
• Door overlay 15 mm<br />
• Opening angle 115°<br />
with self-closing<br />
0 046 067<br />
19<br />
Single-pivot cup hinges Selekta Pro 2000 www.hettich.com<br />
PU<br />
1/50<br />
115°
Cup T22/9 Cup T23/9 Cup TB 22 Cup TB 23<br />
Screw-on Press-in Screw-on Press-in<br />
Order no. PU<br />
0 077 736 1/50<br />
12,5 ø35<br />
52<br />
ø35<br />
13 deep<br />
52<br />
Mounting examples<br />
9<br />
9<br />
11<br />
ø10<br />
12,5<br />
ø35<br />
52<br />
ø35<br />
13 deep<br />
52<br />
9<br />
9<br />
T22/9 hole dimensions T23/9 hole dimensions TB 22 hole dimensions TB 23 hole dimensions<br />
Door<br />
19<br />
37<br />
ø5<br />
37<br />
Side<br />
ø5<br />
min. R R32<br />
7,8<br />
19<br />
min. R R32<br />
11<br />
7,8<br />
Order no. PU<br />
0 077 887 1/50<br />
Chipboard<br />
countersunk<br />
screw<br />
5,3<br />
1,5<br />
13<br />
19<br />
ø10x11<br />
Overlay max. 15 15 mm<br />
Side max. adjustment 2 max. -2 mm<br />
with adjustment screw<br />
Side<br />
19 19<br />
Pre-mounted<br />
screw<br />
11<br />
7,8<br />
Chipboard<br />
countersunk screw<br />
5,3<br />
1,5<br />
13<br />
Overlay max. 15 15 mm<br />
Side max. adjustment 2<br />
max. -2 mm with<br />
adjustment screw<br />
Single-pivot cup hinge Selekta Pro 2035 invisible<br />
from the front, for cabinet construction with 19 mm sides/doors<br />
Opening angle 115°<br />
Door<br />
Pre-mounted<br />
screw<br />
19<br />
Order no. PU<br />
0 010 074 1/50<br />
12,5<br />
ø35<br />
45<br />
ø35<br />
13 deep<br />
45<br />
9,5<br />
9,5<br />
12,5<br />
ø35<br />
Hinge-cup fixing screw<br />
ø 3,5 x 16 mm<br />
• For T22, T22/9 and TB 22 cups<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 071 925 200<br />
Chipboard countersunk screw<br />
ø 4 x 16 mm<br />
• For fixing hinge arm (3rd fixing screw)<br />
• Nickel-plated steel<br />
11<br />
ø8<br />
Order no. PU<br />
0 010 085 200<br />
Order no. PU<br />
0 077 942 1/50<br />
45<br />
ø35<br />
13 deep<br />
45<br />
9,5<br />
9,5<br />
ø8x11<br />
Door buffer Selekta Pro 2000<br />
• For drilling diameter 8 mm<br />
• Plastic<br />
Cover cap for hinge arm<br />
• Silver-grey plastic<br />
Order no. PU<br />
0 010 067 1/50<br />
Universal garment guard<br />
• Prevents garments from becoming<br />
trapped<br />
• White plastic<br />
Order no. PU<br />
9 079 380 1/100<br />
Finishes Order no. PU<br />
white/transparent 0 045 151 1/100<br />
grey/transparent 0 045 152 1/100<br />
Single-pivot cup hinges Selekta Pro 2000 <strong>3.1.</strong>185
<strong>3.1.</strong>186<br />
Glass door cover cap for<br />
Selekta Pro 2000<br />
Side<br />
5,4<br />
5-6<br />
5,4<br />
5-6<br />
Side<br />
5-6<br />
• The hinges Selekta Pro 2000 can be used as glass door<br />
hinge with these cover caps.<br />
• Each hinge requires a cut drilling for the hinge cup<br />
and two drillings for the fixing screws.<br />
• Washers and bushes in transparent plastic protect the glass door<br />
and ensure that the hinges are securely mounted on the glass door.<br />
• Glass thickness 5 - 6 mm<br />
• Can only be used in conjunction with Selekta Pro 2000 hinges<br />
• Secured with M5 countersunk screws<br />
• Precision die-cast zinc nickel-plated<br />
Article Order no. PU<br />
Cover caps for Selekta Pro 2000 T 22 0 077 943 1/50<br />
Cover caps for Selekta Pro 2000 T 22/9 1 081 304 1/50<br />
Cover caps for Selekta Pro 2000 TB 22 0 010 075 1/50<br />
Mounting examples Hole dimension glass door for cup T 22 Hole dimension glass door for cup T22/9<br />
12,5<br />
ø36 -0,5<br />
52<br />
ø36 -0,5<br />
Single-pivot cup hinges Selekta Pro 2000 www.hettich.com<br />
5,5<br />
ø8 -0,5<br />
12,5<br />
52<br />
9<br />
ø8 -0,5<br />
Hole dimension glass door for cup TB 22<br />
12,5<br />
ø36 -0,5<br />
45<br />
9,5<br />
ø8 -0,5
i<br />
Single-pivot hinge for<br />
office and commercial furniture<br />
Door heights<br />
up to 2400<br />
A<br />
up to 2000<br />
up to1600<br />
up to 900<br />
2<br />
X<br />
3<br />
C<br />
Door width up to 600<br />
4<br />
D<br />
5<br />
B<br />
min. 90 mm<br />
Door adjustment Selekta 4<br />
• Overlay adjustment<br />
Unscrew fixing screw (A).<br />
When the door is laterally adjusted, the door overlay<br />
can be reduced by up to 4 mm.<br />
• Height adjustment<br />
Unscrew fixing screws (B).<br />
Detach centre stop (C) with screwdriver, adjust the<br />
height of the door and tighten the fixing screws (B).<br />
Then screw in the front fixing screw.<br />
Then screw in the chipboard countersunk screws (D)<br />
ø 4 x 16 mm.<br />
Number of hinges per door:<br />
Door width, door height, door weight plus<br />
material quality of the door are key factors<br />
for determining the required number of hinges.<br />
In practice, these factors are very variable.<br />
The numbers given in the diagram are for<br />
reference only. A trial mounting is<br />
recommended if in doubt. For stability, the distance<br />
between hinges should be chosen as large as possible.<br />
X = distance between two hinges<br />
(Guide values for 19 mm chipboard panels with a<br />
density of 750 kg/m3 )<br />
Single-pivot cup hinge Selekta 4<br />
Technical information<br />
Single-pivot cup hinges Selekta 4 <strong>3.1.</strong>187
<strong>3.1.</strong>188<br />
Single-pivot cup hinge Selekta 4 with slide-on assembly<br />
for 19 mm side panels<br />
Opening angle 230°/180°<br />
Hinge versions<br />
Glass door cover cap, see page <strong>3.1.</strong>190<br />
Mounting options Article/Order no.<br />
Knuckle central<br />
Knuckle flush<br />
Knuckle central<br />
• Single-pivot cup hinge for office and commercial furniture<br />
• Opening angle 230°/180°, for 19 mm sides and 16-21 mm door thicknesses<br />
• Height adjustable via expanding socket with fixed centre position<br />
• Side adjustment between cup and hinge arm. Cup and hinge arm<br />
can be mounted separately<br />
• In storage wall construction, the knuckle sits centrally<br />
on the 19 mm panel ends<br />
• Knuckle length 24 mm<br />
• Corner hinge knuckles can be recessed into the door edge<br />
• Hinge cup/arm: Precision die-cast zinc nickel-plated<br />
Cup versions<br />
Cup T22<br />
Screw-on<br />
● with self-closing<br />
❍ without self-closing<br />
Selekta 4-T22 Selekta 4-T23<br />
● 0 042 366 ● 0 042 367<br />
❍ 0 042 364 ❍ 0 042 365<br />
● with self-closing<br />
❍ without self-closing<br />
Selekta 4-T22 Selekta 4-T23<br />
● 0 042 382 ● 0 042 383<br />
❍ 0 042 380 ❍ 0 042 381<br />
● with self-closing<br />
❍ without self-closing<br />
Cup T23<br />
Press-in<br />
Selekta 4-T22 Selekta 4-T23<br />
● 0 042 374 ● 0 042 375<br />
❍ 0 042 372 ❍ 0 042 373<br />
Single-pivot cup hinges Selekta 4 www.hettich.com<br />
230°/<br />
180°<br />
PU<br />
1/50<br />
1/50<br />
PU<br />
1/50<br />
1/50<br />
PU<br />
1/50<br />
1/50
Hole pattern door Hole pattern door Hole pattern side<br />
for Cup T22 for Cup T23<br />
36<br />
Mounting examples<br />
21,2<br />
Side<br />
21,2<br />
Side<br />
21,2<br />
Side<br />
ø35<br />
5<br />
5<br />
7<br />
19<br />
7<br />
19<br />
52<br />
52<br />
ø35<br />
5<br />
19<br />
7<br />
5,5<br />
14<br />
5,5<br />
12,5<br />
12,5<br />
Chipboard<br />
countersunk<br />
screw, ø 4 x 16<br />
Door<br />
Overlay max. 5,5 mm<br />
Chipboard<br />
countersunk<br />
screw, ø 4 x 16<br />
Door<br />
Overlay max. 11 mm<br />
36<br />
Chipboard<br />
countersunk<br />
screw, ø 4 x 16<br />
Door<br />
ø10<br />
11<br />
11<br />
Overlay max. 5,5 mm<br />
ø10<br />
52<br />
ø35<br />
52<br />
ø35<br />
Single-pivot cup hinge Selekta 4 with slide-on assembly<br />
for 19 mm side panels<br />
Opening angle 230°/180°<br />
5,5<br />
14<br />
5,5<br />
12,5<br />
12,5<br />
Hinge-cup fixing screw<br />
ø 3,5 x 16 mm<br />
• For Cup T22<br />
• Nickel-plated steel<br />
32<br />
8<br />
5<br />
10<br />
37<br />
Chipboard countersunk screw<br />
ø 4 x 16 mm<br />
• For fixing hinge arm<br />
• Nickel-plated steel<br />
Order no. PU<br />
Order no. PU<br />
0 071 925 200<br />
0 010 085 200<br />
Opening angle stop 90°/135°<br />
• For hinge with 5,5 mm door overlay<br />
• Includes fixing screws<br />
• Nickel-plated steel !<br />
Opening angle Order no. PU<br />
90° 0 042 384 1/50<br />
135° 0 042 385 1/50<br />
Selekta 4 Door buffer<br />
• For drilling diameter 8 mm<br />
• Plastic<br />
Finishes Order no. PU<br />
white/transparent 0 045 151 1/100<br />
grey/transparent 0 045 152 1/100<br />
Universal opening angle stop<br />
• Infinitely adjustable to 120°<br />
• Flexible strap in synthetic material<br />
Order no. PU<br />
9 079 379 1/50<br />
Universal garment guard<br />
• Prevents garments from becoming trapped<br />
• White plastic<br />
Order no. PU<br />
9 079 380 1/100<br />
No door protrusion<br />
free space for internal<br />
pull out components<br />
Single-pivot cup hinges Selekta 4 <strong>3.1.</strong>189<br />
6<br />
47
<strong>3.1.</strong>190<br />
Glass door cover cap for<br />
Selekta 4<br />
• The Selekta 4 hinges can be used as glass door hinges<br />
with these cover caps.<br />
• Each hinge requires a cut drilling for the hinge cup and two drillings<br />
for the fixing screws.<br />
• Washers and bushes in transparent plastic protect the glass door and<br />
ensure that the hinges are securely mounted.<br />
• Glass thickness 5 - 6 mm<br />
• Can only be used in combination with Selekta 4<br />
• Secured with M5 countersunk screws<br />
• Precision die-cast zinc nickel-plated<br />
Order no. PU<br />
1 001 881 1/50<br />
Mounting examples Hole pattern glass door<br />
5<br />
7<br />
Side Side<br />
5-6<br />
5<br />
7<br />
Single-pivot cup hinges Selekta 4 www.hettich.com<br />
5-6<br />
Minimum reveal 7,5 mm<br />
19,4 -0,2<br />
ø36 -0,5<br />
52<br />
31,4 -0,2<br />
ø8 -0,5
<strong>3.1.</strong>191
3.2.0<br />
Range summary<br />
3.2 Specialty hinges<br />
Special-purpose hinges for thin doors and<br />
high-pressure laminate panels (HPL)<br />
3.2.2 - 3.2.3<br />
Refrigerator cabinet<br />
hinge ET 582<br />
3.2.16<br />
Optimat Plus 3 FM<br />
Concealed hinge for front frame<br />
3.2.19<br />
Glass door hinges<br />
3.2.4 - 3.2.12<br />
Refrigerator cabinet<br />
door fixing mechanism<br />
3.2.17<br />
Concealed cylinder hinge<br />
Excellent<br />
3.2.20 - 3.2.21<br />
Folding door hinges<br />
3.2.13 - 3.2.15<br />
Fascia hinge with spring system<br />
3.2.18<br />
Machine-countersunk hinges<br />
Stabilo/Niro/Sepa<br />
3.2.22 - 3.2.25<br />
Range summary of specialty hinges www.hettich.com<br />
i
i<br />
Piano hinges<br />
3.2.26 - 3.2.27<br />
Double swing door fitting<br />
3.2.33<br />
Table hinge 130<br />
3.2.42<br />
Screw-on hinges<br />
3.2.28 - 3.2.30<br />
Flap hinges<br />
3.2.34 - 3.2.39<br />
Table hinge 120<br />
3.2.43<br />
Pivot hinges<br />
3.2.31 - 3.2.33<br />
Special-purpose hinge<br />
for corner cabinets 121<br />
3.2.40 - 3.2.41<br />
Mirror hinge Novi<br />
3.2.44<br />
Range summary<br />
3.2 Specialty hinges<br />
Range summary of specialty hinges 3.2.1
3.2.2<br />
Special-purpose hinge for thin doors<br />
and high-pressure laminate panels (HPL)<br />
Adjustable in three dimensions<br />
• For overlay doors<br />
• For 10, 13 and 19 mm cabinet sides<br />
• For door thicknesses of 10 - 13 mm<br />
• Opening angle 270°/240°<br />
• With visible knuckle 5 mm<br />
• With self-closing<br />
• Height adjustment ± 2 mm<br />
• Overlay adjustment + 1 mm / - 2 mm<br />
• Depth adjustment ± 1 mm<br />
• Protected shaft in abrasion-proof plastic bearings<br />
• Complete with fixing screws<br />
• Nickel-plated die-cast zinc<br />
Mounting options Cabinet side Door overlay Opening angle Order no. PU<br />
mm mm<br />
Knuckle flush 10 3,5 270° 9 079 365 1/100<br />
13 7,0 240° 9 079 367 1/100<br />
19 13,0 270° 9 079 368 1/100<br />
Knuckle central 13 3,5 270° 9 079 370 1/100<br />
19 7,0 240° 9 079 371 1/100<br />
Mounting example<br />
Cabinet side 10 - 13 mm<br />
37<br />
16<br />
10 - 13<br />
Hole pattern<br />
Cabinet side 10 - 13 mm<br />
10/13<br />
8,3<br />
18,5<br />
37<br />
10 - 13<br />
ø3,4<br />
32<br />
±0,2<br />
Mounting example<br />
Cabinet side 19 mm Hole pattern door<br />
37<br />
16<br />
19<br />
Hole pattern<br />
Cabinet side 19 mm<br />
19<br />
13<br />
37<br />
Specialty hinges www.hettich.com<br />
10 - 13<br />
ø5<br />
32<br />
±0,2<br />
!<br />
8<br />
21<br />
32<br />
40<br />
R6<br />
32<br />
ø 3,4<br />
8,3
• For overlay doors<br />
• For 10 and 13 mm cabinet sides<br />
• For door thicknesses of 10 - 13 mm<br />
• Door overlay 3,5 mm<br />
• Opening angle 270°/240°<br />
• With visible knuckle 5 mm<br />
• With self-closing<br />
• Height adjustment ± 2 mm<br />
• Overlay adjustment - 1 mm<br />
• Protected shaft in abrasion-proof plastic<br />
bearings<br />
• Complete with fixing screws<br />
• Die-cast zinc stainless steel<br />
Special-purpose hinges for thin doors<br />
and high-pressure laminate panels (HPL)<br />
Adjustable in two dimensions<br />
Material/Finish Order no. PU<br />
nickel-plated die-cast zinc 9 079 373 1/100<br />
black die-cast zinc 9 079 375 1/100<br />
stainless steel 9 079 377 1/100<br />
Mounting example Hole pattern door Hole pattern side<br />
12 ±0,1<br />
16<br />
10 - 13<br />
Stainless<br />
steel<br />
10 - 13<br />
14 +0,1<br />
!<br />
15,5 ±0,1<br />
52 ø 3,4<br />
41,2 +0,2<br />
R6<br />
+0,2<br />
8,0 8,3<br />
10/13<br />
8,3<br />
12 ±0,1<br />
ø3,4<br />
32 ±0,2<br />
Specialty hinges 3.2.3
3.2.4<br />
All-glass hinge<br />
• For all-glass cabinets<br />
• For overlay and inset glass doors<br />
• Opening angle 270°/220°<br />
• For glass panel thicknesses of 5 - 8 mm<br />
• With visible knuckle 5 mm<br />
• With self-closing<br />
• Height adjustment ± 1 mm<br />
• Overlay adjustment + 1 mm<br />
• Complete with fixing screws and plastic liners<br />
• Die-cast zinc<br />
Mounting option Finish Opening angle Order no. PU<br />
Overlay door nickel-plated matt 270° 9 079 358 1/20<br />
brass-plated polished 270° 9 079 360 1/20<br />
Inset door nickel-plated matt 220° 9 079 361 1/20<br />
brass-plated polished 220° 9 079 363 1/20<br />
Mounting example<br />
Overlay door<br />
16 3<br />
1<br />
15<br />
5-8<br />
Mounting example<br />
Inset door<br />
24,7<br />
13,8<br />
A<br />
B<br />
7<br />
6<br />
7 5-8<br />
9,6<br />
A<br />
Minimum door reveal = 3<br />
Hole pattern side Hole pattern glass door<br />
37 ±0,2<br />
37 ±0,2<br />
Size A Size B<br />
mm mm<br />
5 1 x 45°<br />
6 2 x 45°<br />
7 3 x 45°<br />
8 4 x 45°<br />
±0,2<br />
ø 9<br />
Specialty hinges www.hettich.com<br />
16 -0,4<br />
A<br />
13,8<br />
ø 9<br />
R 9<br />
24 +0,2<br />
37 ±0,2<br />
11,5 +0,2<br />
37 ±0,2<br />
16 -0,4<br />
ø 9±0,2<br />
16 -0,4<br />
±0,2<br />
ø 9
• For overlay and inset glass doors<br />
• Opening angle 230°/190°<br />
• For glass panel thicknesses of 5 - 8 mm<br />
• With visible knuckle 5 mm<br />
• With self-closing<br />
• Height adjustment ± 1 mm<br />
• Overlay adjustment + 1 mm<br />
• Complete with fixing screws and plastic liners<br />
• Die-cast zinc<br />
Glass door hinge<br />
Mounting option Finish Opening angle Order no. PU<br />
Overlay door nickel-plated matt 230° 9 079 352 1/50<br />
brass-plated polished 230° 9 079 353 1/50<br />
Inset door nickel-plated matt 190° 9 079 355 1/50<br />
brass-plated polished 190° 9 079 356 1/50<br />
Mounting example<br />
Overlay door<br />
16<br />
15<br />
Mounting example<br />
Inset door<br />
24,7<br />
13,8<br />
1<br />
B<br />
3<br />
6<br />
7<br />
7 5-8<br />
9,6<br />
A<br />
Minimum door reveal = 3<br />
Hole pattern side Hole pattern door<br />
37 ±0,2<br />
37 ±0,2<br />
Size A Size B<br />
mm mm<br />
5 1 x 45°<br />
6 2 x 45°<br />
7 3 x 45°<br />
8 4 x 45°<br />
16<br />
A<br />
ø5<br />
13,8<br />
ø5<br />
13<br />
13<br />
R 9<br />
24 +0,2<br />
37 ±0,2<br />
11,5 +0,2<br />
37 ±0,2<br />
16 -0,4<br />
ø 9±0,2<br />
16 -0,4<br />
±0,2<br />
ø 9<br />
Specialty hinges 3.2.5
3.2.6<br />
Glass door hinge ET 5150<br />
• For inset glass doors<br />
• Door size max. 1000 x 600 mm<br />
• Opening angle 170°<br />
• Glass thickness max. 6,3 mm<br />
• With self-closing<br />
• Requires 2,2 mm reveal top and bottom and<br />
2 mm reveal at the side.<br />
• The hinge is clamped to the glass door with a screw,<br />
no hole has to be drilled in the glass.<br />
• Glass door hinge ET 5150 Z needs to be used for high<br />
doors, see page 3.2.7!<br />
• Die-cast zinc<br />
Glass door handle<br />
• The design matches the ET 5150 glass door hinge<br />
• The handle is clamped to the glass door with a screw<br />
• Die-cast zinc<br />
Article Finish Order no. PU<br />
Glass door hinge ET 5150 nickel-plated matt 0 024 908 1/20 sets<br />
gold-plated polished 0 024 909 1/20 sets<br />
Glass door handle nickel-plated matt 0 025 314 1/20<br />
gold-plated polished 0 025 315 1/20<br />
The glass door hinge is supplied only as a set consisting of the top and bottom hinges.<br />
Mounting example<br />
37<br />
16<br />
Side<br />
Fasten with<br />
wood screws ø 3,5 mm<br />
Clamping screw<br />
max. 6,3<br />
Anti-slip strip<br />
Glass door<br />
Clamping screw<br />
ET 5150 and ET 5150 Z<br />
glass door hinges<br />
combined on high doors<br />
Clamping screw<br />
Specialty hinges www.hettich.com<br />
5150<br />
37<br />
16<br />
24<br />
5150 Z<br />
5150<br />
2 Reveal<br />
40<br />
30<br />
2,2 Reveal
Mounting example<br />
22<br />
8<br />
Side<br />
23<br />
Fasten with<br />
wood screws ø 3,5 mm<br />
max.<br />
6,3<br />
ø11 Glass door<br />
• For inset glass doors<br />
• Opening angle 180°<br />
• Glass thickness max. 6,3 mm<br />
• Drilling diameter 11 mm<br />
• With self-closing<br />
• Requires a 2 mm reveal on the side<br />
• With cover cap<br />
• Die-cast zinc<br />
• The glass door hinge has the same design as the 5150 hinge<br />
and can be combined with it on higher doors, see page 3.2.6!<br />
Glass door hinge ET 5150 Z<br />
Finish Order no. PU<br />
nickel-plated matt 0 069 934 1/10<br />
gold-plated polished 0 069 935 1/10<br />
Clamping screw<br />
ET 5150 Z and ET 5150<br />
glass door hinges<br />
combined on high doors<br />
23<br />
5150 Z<br />
Clamping screw<br />
5150 Z<br />
5150<br />
2<br />
40<br />
30<br />
Specialty hinges 3.2.7
3.2.8<br />
Glass door hinge ET 5160<br />
Glass door handle<br />
Mounting example<br />
16<br />
16 3,1<br />
14<br />
Glass door hinge ET 5160<br />
• For overlay glass doors<br />
• Door size max. 1000 x 600 mm<br />
• Opening angle 170°<br />
• Glass thickness max. 6,3 mm<br />
• With self-closing<br />
• Door overlay top and bottom 3,3 mm, on sides 11,5 mm<br />
• The hinge is clamped to the glass door with a screw,<br />
no hole has to be drilled in the glass<br />
• Die-cast zinc<br />
Glass door handle<br />
• The design matches the glass door hinge ET 5160<br />
• The handle is clamped to the glass door<br />
with a screw<br />
• Die-cast zinc<br />
Article Finish Order no. PU<br />
Glass door hinge ET 5160 nickel-plated matt 0 030 866 1/20 sets<br />
gold-plated polished 0 040 719 1/20 sets<br />
Glass door handle nickel-plated matt 0 025 314 1/20<br />
gold-plated polished 0 025 315 1/20<br />
The glass door hinge is supplied only as a set consisting of the top and bottom hinges.<br />
Side<br />
Fasten with<br />
wood screws ø 3,5 mm<br />
Clamping screw<br />
Anti-slip strip<br />
Glass door<br />
max.<br />
6,3<br />
Clamping screw<br />
Specialty hinges www.hettich.com<br />
16<br />
16<br />
21<br />
11,5<br />
43<br />
30 3,3
Mounting example<br />
min. 7,5<br />
Side<br />
9,3<br />
Clamping screw<br />
Anti-slip strip<br />
max. 5,2<br />
Glass door<br />
Glass door hinge ET 150<br />
• For inset glass doors<br />
• Door size max. 1000 x 500 mm<br />
• Opening angle 105°<br />
• Glass thickness max. 5,2 mm<br />
• Requires 3 mm reveal top and bottom and<br />
2,8 mm reveal at the side.<br />
• The hinge is clamped to the glass door with a screw,<br />
no hole has to be drilled in the glass<br />
• Die-cast zinc nickel-plated matt<br />
Glass door handle<br />
• The design matches the glass door hinge ET 150<br />
• The handle is clamped to the glass door<br />
with a screw<br />
• Die-cast zinc nickel-plated matt<br />
• The magnetic catch D7 can be used to keep the door<br />
closed (black plastic)<br />
Glass door hinge ET 150<br />
Glass door handle<br />
Magnetic catch D7<br />
Finish Order no. PU<br />
Glass door hinge ET 150 0 020 870 1/20 sets<br />
Glass door handle left 0 020 871 1/20<br />
Glass door handle right 0 020 872 1/20<br />
Magnetic catch D7 0 020 873 1/20<br />
The glass door hinge is supplied only as a set consisting of the top and bottom hinges.<br />
Clamping screw<br />
2,8 mm reveal<br />
ø10<br />
36<br />
25<br />
10<br />
3 mm reveal<br />
Specialty hinges 3.2.9
3.2.10<br />
Glass door hinge GT 3165/GT 3145<br />
Glass door handle<br />
26<br />
Side<br />
6<br />
5-6<br />
5-6<br />
9,6<br />
Anti-slip strip<br />
Clamping screw<br />
Clamping screw Clamping screw<br />
Glass door<br />
3<br />
Glass door hinge GT 3165/GT 3145<br />
• For inset glass doors<br />
• Glass thickness 5 - 6 mm<br />
• Requires 2,5 mm reveal top and bottom and<br />
3 mm reveal at the side<br />
• The hinge is clamped to the glass door with a screw,<br />
no hole has to be drilled in the glass<br />
• With spring mechanism<br />
• Fastened on the side panel with countersunk<br />
ø 3 mm wood screws, head ø 5 mm<br />
• The anti-slip strip ensures that the glass door<br />
is held securely<br />
• Die-cast zinc<br />
Glass door handle<br />
• The design matches the glass door hinge<br />
• The handle is clamped to the glass door with a screw,<br />
in any position<br />
• The recessed area in the handle means that despite<br />
its slight format the door can be handled<br />
safely and easily.<br />
• Die-cast zinc<br />
Article Finish Order no. PU<br />
Glass door hinge GT 3165 nickel-plated 0 042 344 1/10 sets<br />
Glass door hinge GT 3145 black 0 072 888 1/10 sets<br />
Glass door handle nickel-plated 0 042 350 1/10<br />
black 0 072 889 1/10<br />
The glass door hinge is supplied only as a set consisting of the top and bottom hinges.<br />
Mounting example<br />
9<br />
Specialty hinges www.hettich.com<br />
16 28<br />
3 mm reveal<br />
2,5
24<br />
MASSIV SOLID<br />
MESSING BRASS<br />
4,5 - 6,5<br />
Glass door hinge GT 3000<br />
• For inset glass doors<br />
• Drawn brass, drilled and milled<br />
• Glass thickness 4,5 - 6,5 mm<br />
• Glass hole ø 19 mm, fasten with keyed nut<br />
• Automatic compensation for glass thickness tolerances<br />
• For 32 mm hole line spacing<br />
• Tarnish resistant<br />
• Holding feature at approx. 105° opening angle<br />
• Door and cabinet hinge parts are mounted separately<br />
• Detachable door with safety feature against accidental unhinging<br />
• Door and frame parts secured by self-locking screw<br />
• Height adjustment approx. 2 mm<br />
• Side adjustment approx. 2,5 mm<br />
• Front panel ø 25 mm<br />
• Solid brass<br />
Mounting example Glass hole<br />
Fasten with<br />
wood screws ø 3,5 mm<br />
Side adjustment<br />
Plastic washers<br />
min. 0,5 mm Reveal<br />
Glass door<br />
!<br />
Finish Order no. PU<br />
polished brass 0 031 107 1/20<br />
high-gloss chrome-plated 0 031 108 1/20<br />
ø25<br />
10<br />
4<br />
32 45<br />
max.<br />
29<br />
17,5<br />
19 +0,2<br />
Specialty hinges 3.2.11
3.2.12<br />
Glass door hinge GT 6000<br />
Mounting example<br />
28<br />
Overlay 6 mm<br />
Side<br />
6<br />
60<br />
Depth adjustment<br />
Side and depth<br />
adjustment<br />
4,5-7<br />
30-37<br />
43<br />
Glass door<br />
Fasten with<br />
countersunk wood screws ø 3 DIN 97 x 20 mm<br />
32<br />
• For inset or overlay glass doors<br />
• Glass thickness 4,5 - 7 mm<br />
• Overlay 6 mm<br />
• With unique catch operation<br />
• Rugged all-metal version<br />
• Side- and height-adjustable for 32 mm hole line spacing<br />
• 30 - 37 mm variable hole line adjustment<br />
• Silver-coloured cover cap, ground<br />
• Hinge surface, silver-coloured<br />
Glass door hinge GT 6000 Order no. PU<br />
Overlay 6 mm 0 031 115 1/20<br />
Overlay 13 mm 0 031 118 1/20<br />
Inset door 0 031 121 1/20<br />
Glass hole<br />
20 -0,2 12 -0,2<br />
Specialty hinges www.hettich.com<br />
42 +0,2<br />
Overlay 13 mm Inset door<br />
Side<br />
13<br />
Side and depth<br />
adjustment<br />
4,5-7<br />
Glass door<br />
Side<br />
3<br />
Side and depth<br />
adjustment<br />
4,5-7<br />
Glass<br />
door
• Door thickness from 15 mm<br />
• The reveal is adjustable from<br />
hairline to + 4 mm. The mounting is<br />
always flush<br />
• Identical hole pattern for both doors,<br />
hinge parts are mounted separately<br />
• Opening angle 180°<br />
• Pivot offset adjustment in steps<br />
of 0 mm, 3 mm and 6 mm<br />
• Nickel-plated die-cast zinc<br />
Folding-door hinge<br />
with adjustable offset pivot<br />
Opening angle 180°<br />
Mounting example Hole pattern press-in<br />
Door protrusion<br />
Example:<br />
For 3 mm reveal:<br />
Pivot offset mm Door protrusion mm<br />
0 0<br />
3 6<br />
6 12<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm<br />
• Nickel-plated steel<br />
52<br />
Folding door hinge Order no. PU<br />
� Screw-on version<br />
� Press-in version<br />
0 046 787 1/10<br />
with premounted ø 10 x 11 dowels 0 052 095 1/10<br />
Pivot offset<br />
Reveal adjustment<br />
5,5<br />
0 3 6 mm<br />
Pivot adjustment<br />
Order no. PU<br />
0 048296 200<br />
12<br />
ø10 x 11<br />
5<br />
5,5<br />
22,5<br />
Hole pattern screw on<br />
12<br />
5<br />
5,5<br />
22,5<br />
�<br />
�<br />
35 52<br />
35 52<br />
Specialty hinges 3.2.13
3.2.14<br />
Clip-on centre hinge<br />
for inset doors and<br />
folding doors<br />
Clip-on centre hinge<br />
64<br />
38<br />
Mounting with pivot offset<br />
64<br />
(38)<br />
B1* B2*<br />
Reveal<br />
5,25 Pivot offset<br />
* B 1 hole distance mm 10,5 11 11,5 12 12,5<br />
* B 2 hole distance mm 22,5 23 23,5 24 24,5<br />
Reveal mm<br />
* Make a trial mounting<br />
5 4 3 2 1<br />
64<br />
For calculating<br />
pivot offset for<br />
folding doors<br />
see page 3.2.15<br />
• Clip-on centre hinges allow door panels to be clipped on<br />
quickly and easily, zip-style, starting from the bottom<br />
• Opening angle 180°<br />
• Mounting plate: black plastic<br />
• Hinge: nickel-plated steel<br />
Order no. PU<br />
0 079 373 1/10<br />
Centre mounting<br />
64<br />
(38)<br />
B* B*<br />
Specialty hinges www.hettich.com<br />
Reveal<br />
Fixing countersunk screws<br />
ø 3,5 mm<br />
• Nickel-plated steel<br />
Length mm Order no. PU<br />
13 0 048 296 200<br />
16 0 071 925 200<br />
* B hole distance mm 16,5 17 17,5 18 18,5<br />
Reveal mm<br />
* Make a trial mounting<br />
5 4 3 2 1
Folding door hinge 625<br />
32<br />
9<br />
8,5 19<br />
16 25<br />
6<br />
27,5<br />
For calculating pivot offset<br />
see below.<br />
(27,5)<br />
8,5 19<br />
B*<br />
B*<br />
Reveal<br />
• The hinge 625 is specially suited for use in folding<br />
door applications<br />
• Opening angle 180°<br />
• Smooth action through wear-resistant washers<br />
with bushes<br />
• With fixed steel pin<br />
• Nickel-plated steel<br />
32<br />
5,25 Pivot offset<br />
Calculating the pivot offset for folding doors<br />
1 Mount door section � with 110° hinges on cabinet and adjust door reveal<br />
2 Mount door section � with runners and guides to runner and guide profiles<br />
and adjust door reveal (oval holes in runners and guides)<br />
3 Fold door sections � and � in open position (see diagram)<br />
4 Measure X at outer door edge<br />
5 Measure L is the desired door clearance<br />
6 Measure X (door offset) divided by two plus Measure L (clearance)<br />
divided by two is the pivot offset<br />
X+L =<br />
2<br />
50<br />
1,25<br />
pivot offset<br />
Mounting with pivot offset<br />
* B hole distance mm 11,25 11,75 12,25 12,75 13,25<br />
Reveal mm 5 4 3 2 1<br />
* Make a trial mounting<br />
Order no. PU<br />
0 071 648 1/10<br />
Hinge 625<br />
for flush-mounted doors<br />
and folding doors<br />
Socket M5 x 11 mm<br />
• For thread M5<br />
• Drilling diameter 10 mm<br />
• White plastic<br />
Order no. PU<br />
0 045 166 1/200<br />
Fixing countersunk screws<br />
ø 3,5 mm<br />
• Nickel-plated steel<br />
Length mm Order no. PU<br />
13 0 048 296 200<br />
16 0 071 925 200<br />
*<br />
� �<br />
X<br />
* Allow at least 40 mm<br />
Door offset<br />
for fittings<br />
L<br />
Pivot offset<br />
Specialty hinges 3.2.15
Refrigerator cabinet hinge<br />
ET 582<br />
5<br />
33<br />
3.2.16<br />
Mounting example<br />
16<br />
12,5<br />
* ***<br />
Mounting plate assembly: 33 mm from cabinet front edge<br />
Overlay 14,5 mm for distance 3 mm and C distance 4,5 mm<br />
T22 hole dimensions<br />
52<br />
ø35<br />
C = 3 - 5 mm<br />
C<br />
5,5<br />
12,8<br />
Mounting plate fixing screws ø 6,3 mm<br />
• Nickel-plated steel<br />
Length mm Order no. PU<br />
11 0 040 006 1/200<br />
13 0 040 007 1/200<br />
15 0 040 008 1/200<br />
• Door thickness from 16 mm<br />
• Cup diameter 35 mm<br />
• Opening angle 95°<br />
• With self-closing feature<br />
• Complete with mounting plate and clipped-on plastic distance plate<br />
• Using the distance spacer plate produces a distance of 3 mm<br />
• Integrated overlay adjustment ± 1 mm<br />
• Depth adjustment ± 3 mm<br />
• Hinge cup: nickel-plated die-cast zinc<br />
• Hinge arm: nickel-plated steel<br />
Order no. PU<br />
0 072 134 1/10<br />
Mounting plate<br />
+ plastic distance plate<br />
= 3 mm distance<br />
C-distance mm Overlay mm<br />
3,0 13,0<br />
3,5 13,5<br />
4,0 14,0<br />
4,5 14,5<br />
5,0 15,0<br />
Mounting plate<br />
without plastic distance plate<br />
= 0 mm distance<br />
C-distance mm Overlay mm<br />
3,0 16,0<br />
3,5 16,5<br />
4,0 17,0<br />
4,5 17,5<br />
5,0 18,0<br />
Specialty hinges www.hettich.com<br />
12,8<br />
66<br />
52<br />
88<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm For Cup T22<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 048296 200<br />
32 46
Mounting example<br />
100<br />
7,5 12,5 7,5 35 25 13,5<br />
24<br />
35<br />
17<br />
• Suitable for built-in refrigerators<br />
• Allows cabinet and refrigerator door<br />
to be opened simultaneously<br />
• All-inclusive kit complete with<br />
guide profile, refrigerator adapter<br />
and cover caps<br />
• White plastic<br />
Order no. PU<br />
9 079 390 1 set<br />
5<br />
14<br />
24<br />
5<br />
33<br />
16<br />
12,5<br />
* ***<br />
Refrigerator cabinet<br />
door fixing mechanism<br />
Specialty hinges 3.2.17
3.2.18<br />
Fascia hinge<br />
with spring system<br />
• Suitable for mounting hinged fascias or for connecting<br />
two door sections on folding/sliding doors<br />
• The integrated spring system keeps the door closed<br />
in a 90° position and also keeps the fascia aligned<br />
with the door<br />
• The flat side arm takes up little space when the door<br />
is pushed into position between side panel and<br />
auxiliary panel<br />
• The hinge is ideal for the KA 5740 folding/sliding door<br />
fitting – see group 4<br />
• Nickel-plated die-cast zinc<br />
Mounting example Mounting example of pocket sliding door fitting KA 5740<br />
with blind panel hinge<br />
�<br />
52<br />
Fascia<br />
5,5 73,5<br />
5<br />
max. 43,5<br />
56,5<br />
91<br />
12<br />
7<br />
�<br />
ø35<br />
0,5<br />
10<br />
10<br />
41<br />
12,8<br />
Order no. PU<br />
0 060 832 1/10<br />
20 34<br />
� Hinge-cup fixing screw<br />
ø 3,5 x 13 mm<br />
• Nickel-plated steel<br />
� Hinge arm fixing screw<br />
ø 4 x 16 mm<br />
• Nickel-plated steel<br />
Fascia hinge<br />
Order no. PU<br />
0 048296 200<br />
Order no. PU<br />
0 010 085 200<br />
Specialty hinges www.hettich.com
Mounting example<br />
8<br />
Hole pattern<br />
34<br />
ø 35<br />
45<br />
2,5<br />
10<br />
ø 35<br />
9,5<br />
10<br />
4,3<br />
• Suitable for all frame widths<br />
• Opening angle 110°<br />
• Door thickness from 13 mm<br />
• Cup diameter 35 mm<br />
• With self-closing feature<br />
• Door overlay min. 34 mm<br />
• Cup distance 2,5 mm<br />
• Overlay adjustment ± 2 mm<br />
• Height adjustment ± 2 mm<br />
• Hinge cup/arm: nickel-plated steel<br />
Order no. PU<br />
0 045 517 1/10<br />
57 45<br />
23<br />
20<br />
9,5<br />
Hinge-cup fixing screw<br />
ø 3,5 x 13 mm<br />
• Nickel-plated steel<br />
Hinge arm fixing screw<br />
ø 3,5 x 16 mm<br />
• Nickel-plated steel<br />
25<br />
Optimat Plus 3 FM<br />
Concealed hinge<br />
for front frame<br />
Order no. PU<br />
0 048296 200<br />
Order no. PU<br />
0 071 925 200<br />
Specialty hinges 3.2.19
3.2.20<br />
Concealed cylinder hinge Excellent<br />
• For doors and flaps<br />
• Opening angle 180°<br />
• Usable left or right<br />
• Brushed matt brass<br />
Mounting examples ø 10 mm<br />
ø 12 mm<br />
closed open<br />
Bottom<br />
Panel<br />
Side<br />
Side<br />
Flap<br />
Door<br />
Door<br />
Panel<br />
Diameter mm Order no. PU<br />
10 0 031 168 1/48<br />
12 0 031 169 1/48<br />
14 0 031 170 1/24<br />
16 0 031 171 1/24<br />
18 0 031 172 1/24<br />
24 0 031 173 1/12<br />
Specialty hinges www.hettich.com<br />
11<br />
ø10<br />
2,5<br />
2<br />
11<br />
16,1<br />
22<br />
ø10<br />
Countersunk wood screw<br />
ø 2 mm DIN 97<br />
13,5<br />
ø12<br />
3,5<br />
2,2<br />
27<br />
13,5<br />
19,2<br />
ø12<br />
Countersunk wood screw<br />
ø 2,5 DIN 97<br />
MASSIV SOLID<br />
MESSING BRASS
MASSIV SOLID<br />
MESSING BRASS<br />
The Excellent hinge has attractive<br />
features for modern furniture<br />
designs.<br />
For quick and easy assembly follow<br />
the steps as shown in the diagrams.<br />
For bigger loads the hinge cylinders<br />
can be glued in for added strength.<br />
Drill holes Insert hinge cylinders either<br />
with or without glue<br />
Concealed cylinder hinge Excellent<br />
ø 14 mm ø 16 mm ø 18 mm<br />
ø 24 mm<br />
15,5<br />
3<br />
3<br />
ø14<br />
22<br />
31<br />
15,5<br />
ø14<br />
Countersunk wood screw<br />
ø 2,5 DIN 97<br />
16,5<br />
ø16<br />
3<br />
3<br />
24<br />
33<br />
16,5<br />
ø16<br />
Countersunk wood screw<br />
ø 3 mm DIN 97<br />
17,5<br />
ø18<br />
3<br />
3<br />
26,3<br />
17,5<br />
35<br />
ø18<br />
Countersunk wood screw<br />
ø 3 mm DIN 97<br />
Fasten with expanding screws<br />
and wood screws<br />
25<br />
4,5<br />
3,5<br />
ø24<br />
35,6<br />
25<br />
ø24<br />
50<br />
Countersunk wood screw<br />
ø 3,5 DIN 97<br />
Specialty hinges 3.2.21
3.2.22<br />
Hinge Stabilo 72<br />
Mounting examples<br />
3<br />
closed open<br />
3<br />
Bottom<br />
Panel<br />
Side<br />
3<br />
Side<br />
Flap<br />
3<br />
Door<br />
Door<br />
Panel<br />
Fasten with countersunk wood screw ø 3 mm DIN 97<br />
4<br />
4<br />
4<br />
• For lightweight furniture doors and flaps weighing<br />
up to 5 kg<br />
• Rounded flaps for machine countersinking,<br />
router cutter ø 14 mm<br />
• Opening angle 180°<br />
• Usable left or right<br />
• All-metal version<br />
Finish Order no. PU<br />
nickel-plated 0 044 797 1/10<br />
bronze 0 042 557 1/10<br />
brass-plated 0 042 558 1/10<br />
19<br />
14 14<br />
38<br />
Specialty hinges www.hettich.com<br />
25 50<br />
4,7<br />
Side<br />
Door<br />
19<br />
25<br />
50<br />
4,7<br />
14<br />
3<br />
3<br />
14
Mounting examples<br />
closed<br />
2<br />
2<br />
Bottom<br />
Panel<br />
2<br />
Side<br />
2<br />
Side<br />
Flap<br />
Door<br />
Door<br />
Panel<br />
open<br />
Fasten with countersunk wood screw ø 3 mm DIN 97<br />
2<br />
2<br />
2<br />
• For folding doors, lightweight furniture doors<br />
and flaps weighing up to 3,5 kg<br />
• For machine countersinking,<br />
router cutter ø 11 mm<br />
• Opening angle 180°<br />
• Usable left or right<br />
• Durable plastic housing and<br />
nickel-plated brass links<br />
Hinge Stabilo 75<br />
Hinge arm Housing Order no. PU<br />
Nickel-plated brass white plastic 0 042 339 1/10<br />
Nickel-plated brass brown plastic 0 042 340 1/10<br />
11 11<br />
28<br />
14<br />
33<br />
2<br />
2<br />
33<br />
14<br />
Specialty hinges 3.2.23<br />
11<br />
11<br />
Side<br />
Door
3.2.24<br />
Hinge Niro 66<br />
Mounting examples<br />
Backing<br />
Closed<br />
min.31 Frame<br />
3,5<br />
Door<br />
min. 32<br />
Door<br />
3,5<br />
Open<br />
Closed Open<br />
Frame<br />
3,5<br />
Door<br />
Fasten with countersunk wood screws ø 5,5 mm DIN 97<br />
• For room doors, concertina and folding doors, access<br />
doors for dividing walls, windows, wall cabinets,<br />
heavy cupboard doors, folding tables, etc.<br />
• Load-bearing capacity 30 kg with two hinges<br />
50 kg with three hinges<br />
• With plastic housing and rounded flaps for machine<br />
countersinking, router cutter ø 25 mm<br />
• Opening angle 180°<br />
• Usable left or right<br />
• Stainless steel finely ground and brushed<br />
Order no. PU<br />
0 031 184 1/2<br />
25<br />
64<br />
Stainless<br />
steel<br />
Specialty hinges www.hettich.com<br />
25<br />
85<br />
28<br />
Side<br />
Door<br />
42<br />
85<br />
7<br />
28<br />
25<br />
3,5<br />
3,5<br />
25
MASSIV SOLID<br />
MESSING BRASS<br />
Hinge length 39 mm<br />
Mounting example for<br />
hinge length 39 mm<br />
Side<br />
9<br />
28<br />
7 7<br />
9<br />
Door<br />
23 39<br />
2<br />
Door<br />
2<br />
4<br />
4<br />
Fasten with countersunk wood screws ø 2,7 DIN 97<br />
18<br />
• For doors, windows and flaps<br />
• Rounded flaps for machine countersinking,<br />
router cutter ø 18 mm<br />
• Opening angle 180°<br />
• Usable left or right<br />
• Matt brushed brass<br />
Hinge length 41 mm Hinge length 52 mm Hinge length 88 mm<br />
18<br />
Side<br />
46<br />
18<br />
7<br />
1,6<br />
23 41<br />
180°<br />
18<br />
Mounting example for<br />
hinge lengths 41/52/88 mm<br />
Side<br />
7 7<br />
46<br />
18<br />
Door<br />
34 52<br />
2<br />
Door<br />
18 18<br />
46<br />
4<br />
Side<br />
18<br />
18<br />
3<br />
3<br />
Hinge Sepa<br />
Hinge length mm Order no. PU<br />
39 0 046 848 1/10<br />
41 0 031 174 1/10<br />
52 0 031 175 1/10<br />
88 0 031 176 1/10<br />
70 88<br />
180°<br />
Specialty hinges 3.2.25<br />
2
3.2.26<br />
Piano hinges<br />
• 20 mm open width<br />
• Knuckle length 15 mm<br />
• Hole spacing 60,4 mm<br />
• Length 3500 mm<br />
• Hole size ø 3,25 mm<br />
Material/Finish Order no. PU<br />
BILAC® brass-plated laquered steel 0 040 671 1/50<br />
nickel-plated steel 0 040 672 1/50<br />
stainless steel 0 040 674 1/10<br />
brass 0 061 755 1/10<br />
• 25 mm open width<br />
• Knuckle length 15 mm<br />
• Hole spacing 60,4 mm<br />
• Length 3500 mm<br />
• Hole size ø 3,75 mm<br />
Material/Finish Order no. PU<br />
BILAC® brass-plated laquered steel 0 040 677 1/50<br />
nickel-plated steel 0 040 678 1/50<br />
stainless steel 0 040 680 1/10<br />
brass 0 059 727 1/10<br />
• 28 mm open width<br />
• Knuckle length 15 mm<br />
• Hole spacing 60,4 mm<br />
• Length 3500 mm<br />
• Hole size ø 3,75 mm<br />
Material/Finish Order no. PU<br />
BILAC® brass-plated laquered steel 0 040 683 1/50<br />
Specialty hinges www.hettich.com<br />
25<br />
20<br />
14<br />
12<br />
28 17,5<br />
3<br />
3,2<br />
3,2
• 32 mm open width<br />
• Knuckle length 15 mm<br />
• Hole spacing 60,4 mm<br />
• Length 3500 mm<br />
• Hole size ø 3,75 mm<br />
Piano hinges<br />
Material/Finish Order no. PU<br />
BILAC® brass-plated laquered steel 0 040 689 1/50<br />
nickel-plated steel 0 040 690 1/50<br />
bronze-plated steel 0 040 691 1/50<br />
stainless steel 0 040 692 1/10<br />
brass 0 058 123 1/10<br />
Material/Finish Order no. PU<br />
BILAC® brass-plated laquered steel 0 040 695 1/50<br />
nickel-plated steel 0 040 696 1/50<br />
stainless steel 0 040 698 1/10<br />
brass 0 059 046 1/10<br />
32<br />
• 40 mm open width<br />
• Knuckle length 15 mm<br />
• Hole spacing 60,4 mm<br />
• Length 3500 mm<br />
• Hole size ø 4,25 mm<br />
17,5<br />
40 22<br />
3,2<br />
3,7<br />
Specialty hinges 3.2.27
6<br />
3.2.28<br />
Screw-on hinge<br />
with and without spring<br />
Opening angle 90°<br />
Side panel mounting<br />
overlay door<br />
Side<br />
19<br />
Door<br />
1<br />
16 10 29<br />
8x4<br />
The diagrams show mounting examples<br />
for 19 mm thick side and door panels.<br />
For thinner side and centre panels, or<br />
if a larger reveal is needed, stack the distance<br />
plates to the required thickness.<br />
19<br />
19<br />
32 32<br />
ø4<br />
16 8 31 19<br />
1<br />
Ø4<br />
• For all applications where hinges<br />
requiring pre-drilled cup holes<br />
cannot be used<br />
• Also suitable as flapstay hinge for<br />
lightweight flaps without flapstay<br />
• Nickel-plated steel<br />
Distance plate 2 mm<br />
• Stackable<br />
• White plastic<br />
Centre panel mounting<br />
half overlay doors<br />
19<br />
Article Order no. PU<br />
Screw-on hinge with spring 0 019 639 1/50<br />
without spring 0 019 640 1/50<br />
Distance plate 0 019 641 1/50<br />
Side<br />
19<br />
16 10 29<br />
8x4<br />
5<br />
2<br />
Side panel mounting<br />
inset door<br />
Side Door Side Door Side Door<br />
Specialty hinges www.hettich.com<br />
19<br />
32 32<br />
ø4<br />
16 8 31 19<br />
1<br />
Door<br />
Ø4<br />
1<br />
Side<br />
Fixing countersunk screws<br />
ø 3,5 mm<br />
• Nickel-plated steel<br />
19<br />
0,5<br />
1,5<br />
Door<br />
16 31<br />
8x4<br />
Length mm Order no. PU<br />
13 0 048 296 200<br />
16 0 071 925 200<br />
1<br />
19<br />
8<br />
19<br />
32 32<br />
ø4<br />
16 29 10 19<br />
1<br />
Ø4
165°<br />
130°<br />
Side panel mounting<br />
overlay door<br />
Side<br />
19<br />
41<br />
Door<br />
19<br />
35 32 28 27<br />
• For all applications where hinges requiring<br />
pre-drilled cup holes cannot be used<br />
• Opening angle can be infinitely reduced<br />
to 130° at adjusting screw<br />
• Nickel-plated steel<br />
Centre panel mounting<br />
half overlay doors<br />
19<br />
19<br />
Fixing countersunk screws<br />
ø 3,5 mm<br />
• Nickel-plated steel<br />
1<br />
Length mm Order no. PU<br />
13 0 048 296 200<br />
16 0 071 925 200<br />
Screw-on hinge<br />
with spring<br />
Opening angle 165-130°<br />
Side panel mounting<br />
inset door<br />
Side Door Side Door Side Door<br />
8x4 ø4<br />
8x4 ø4<br />
8x4<br />
41<br />
Order no. PU<br />
0 020 046 1/50<br />
Side<br />
19<br />
35 32 17,5 27<br />
Side<br />
Door Door<br />
Door<br />
19<br />
41<br />
19<br />
35 52 8 27<br />
ø4<br />
Specialty hinges 3.2.29
3.2.30<br />
Mini screw-on hinge<br />
with spring<br />
Opening angle 90°<br />
Side panel mounting<br />
overlay door<br />
Side<br />
19<br />
ø3<br />
13<br />
• For all applications where hinges requiring<br />
pre-drilled cup holes cannot be used<br />
• The hinge is normally used for small doors<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 020 126 1/50<br />
Door<br />
1<br />
19<br />
2<br />
12 7<br />
12 7 20 14<br />
Specialty hinges www.hettich.com<br />
24<br />
ø3<br />
Side Door<br />
22<br />
6 x 3<br />
14<br />
24
Mounting example<br />
Side<br />
Reveal<br />
F<br />
X<br />
15<br />
10<br />
Door<br />
Door thickness S Reveal F Distance X<br />
mm mm mm<br />
16 1,2 16,2<br />
17 1,5 16,5<br />
18 2,0 17,0<br />
19 2,5 17,5<br />
20 3,0 18,0<br />
S<br />
• For inset doors<br />
• For door thicknesses 16 - 20 mm<br />
• Opening angle 140°<br />
• Straightforward assembly and<br />
door adjustment<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 069 933 1/10<br />
Reveal<br />
adjustment<br />
10<br />
22<br />
12<br />
ø8<br />
ø5<br />
8<br />
Pivot hinge<br />
Specialty hinges 3.2.31
3.2.32<br />
Pivot hinge<br />
Mounting example<br />
30<br />
17,5<br />
ø7<br />
14<br />
ø7<br />
• For small inset doors<br />
• For door thicknesses 12 - 21 mm<br />
• Opening angle 140°<br />
• Straightforward assembly and door<br />
adjustment<br />
• The doors are easily inserted and<br />
removed by simply withdrawing<br />
the spring-mounted pin<br />
• Plastic<br />
Finish Order no. PU<br />
white 0 006 731 1/200<br />
brown 0 006 732 1/200<br />
Hole in top and<br />
bottom panel<br />
15,2<br />
ø12<br />
7,5 deep<br />
Specialty hinges www.hettich.com<br />
8,5<br />
Adjustment<br />
14<br />
6
7<br />
63 24<br />
24<br />
29<br />
46<br />
31<br />
2,5 20<br />
16<br />
ø4<br />
58<br />
B<br />
29<br />
B<br />
24<br />
24<br />
A<br />
8<br />
11<br />
19-30<br />
B A<br />
Pivot hinge<br />
• For overlay louvre doors<br />
• For side thickness of at least 16 mm<br />
and door thickness of 28 mm<br />
• Opening angle 180°<br />
• PU = 2 hinges for 1 door<br />
with 12 fixing screws<br />
• Zinc-plated steel<br />
Order no. PU<br />
0 001 439 1<br />
Double swing door fitting<br />
• For door thicknesses 19 - 30 mm<br />
• Door weight max. 4 kg<br />
• PU = 2 hinges with 12 fixing screws<br />
• Brass-plated steel<br />
Order no. PU<br />
0 001 512 1<br />
8<br />
11<br />
A<br />
24<br />
24<br />
B<br />
A<br />
B B<br />
Pivot hinge<br />
Double swing door fitting<br />
B<br />
A<br />
max.<br />
4kg<br />
max.<br />
4kg<br />
C C<br />
A<br />
B<br />
Specialty hinges 3.2.33<br />
6
Reveal<br />
3.2.34<br />
Flap hinge Markant 7.1<br />
Mounting example<br />
32,5<br />
D<br />
ø35<br />
C*<br />
B<br />
AS<br />
12<br />
16<br />
0,8<br />
A<br />
37<br />
Side<br />
32<br />
32<br />
17,5 + B + AS = hinge centre<br />
8<br />
16<br />
Bottom<br />
• For overlay flaps<br />
• Separate installation of mounting plate and flap arm<br />
• Cup diameter 35 mm<br />
• Depth adjustment ± 2mm<br />
• Height adjustment ± 2mm<br />
via mounting plate, see page <strong>3.1.</strong>150<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 046 849 1/25 sets<br />
Minimum door reveal allowed for each door (door mounting) to determine cup and mounting plate distance:<br />
27<br />
Cup distance Door thickness mm<br />
C* mm 16 18 20 22 24 26 28 30 32 34 36 38<br />
3 0,4 0,8 1,2 1,8 2,4 3,2 4,3 5,9 7,7 9,6 11,5 13,3<br />
4 0,4 0,8 1,2 1,8 2,4 3,2 4,2 5,6 7,2 9,1 10,9 12,7<br />
4,5 0,4 0,8 1,2 1,8 2,4 3,2 4,2 5,6 7,2 9,1 10,9 12,7<br />
5 0,4 0,7 1,1 1,6 2,3 3,1 4,0 5,2 6,7 8,5 10,2 12,0<br />
6 0,4 0,7 1,1 1,6 2,3 3,0 3,8 4,9 6,2 7,9 9,5 11,3<br />
7 0,4 0,6 1,0 1,5 2,1 2,9 3,6 4,6 5,7 7,3 8,8 10,6<br />
Specialty hinges www.hettich.com<br />
14,5<br />
ø35<br />
48<br />
20<br />
11,8<br />
Cup distance A<br />
C mm mm<br />
3,0 13,0<br />
4,0 14,0<br />
4,5 14,5<br />
5,0 15,0<br />
6,0 16,0<br />
7,0 17,0<br />
Mounting plate<br />
Distance mm B mm D mm<br />
0,0 6,0 23,5<br />
1,5 7,5 25,0<br />
3,0 9,0 26,5<br />
5,0 11,0 28,5
Mounting example<br />
Bottom<br />
Bottom<br />
Flap<br />
6-8<br />
Reveal X<br />
Reveal Y<br />
Depth adjustment 5 mm<br />
Height adjustment 2 mm<br />
105°<br />
Flap<br />
Fasten with countersunk wood screws ø 3,5 x 16 mm<br />
Flap overlay Reveal X Reveal Y<br />
mm mm mm<br />
6,0 0,5 2,5<br />
7,0 1,0 2,0<br />
8,0 1,5 1,6<br />
9<br />
Height adjustment 2 mm<br />
• Closing angle 105°<br />
• Flap is aligned by height, side and depth adjustment<br />
• In open position, before height adjustment,<br />
inside face of bottom panel and flap are flush<br />
• Housing: Plastic<br />
screw-on panel plate: Die-cast zinc<br />
Flap Bottom<br />
21<br />
3,5<br />
20<br />
34<br />
Flap hinge Markant 9<br />
Finish Order no. PU<br />
white/nickel-plated 0 072 900 1/20<br />
brown/nickel-plated 0 072 901 1/20<br />
black/nickel-plated 0 072 902 1/20<br />
Hole pattern<br />
20<br />
11<br />
10<br />
ø35<br />
Specialty hinges 3.2.35<br />
9
3.2.36<br />
Flap hinge Markant 10<br />
Mounting example<br />
Bottom<br />
Bottom<br />
Flap<br />
Reveal dimensions<br />
TD<br />
1 mm Reveal<br />
2 mm Reveal<br />
16<br />
SF<br />
Flap<br />
Fasten with countersunk wood screws ø 3 x 15 mm<br />
Flap thickness TD Minimum door reveal SF<br />
mm mm<br />
16 2,0<br />
17 3,0<br />
18 4,0<br />
19 5,0<br />
20 6,0<br />
• Only 3 mm recess in bottom panel<br />
• In open position, inside face of bottom panel<br />
and flap are flush<br />
• With a 16 mm gauge flap and<br />
16 mm gauge panel, the flap is flush<br />
with the panel when closed<br />
• Please observe minimum visible reveal SF,<br />
see below<br />
• No interfering shoulders, recesses or steps<br />
• Precision die-cast zinc nickel-plated<br />
Order no. PU<br />
0 046 696 1/20<br />
23<br />
3<br />
49,5<br />
Bottom Flap<br />
Hole pattern<br />
Specialty hinges www.hettich.com<br />
12<br />
3<br />
9<br />
24<br />
ø30<br />
12
Mounting example<br />
Bottom<br />
Bottom<br />
Flap<br />
Reveal dimensions<br />
TD<br />
Flap thickness TD Minimum door reveal SF<br />
mm mm<br />
16 1,0<br />
17 2,0<br />
18 3,0<br />
19 3,5<br />
20 4,5<br />
18<br />
SF<br />
1 mm Reveal<br />
2mm<br />
1mm<br />
Flap<br />
Height adjustment<br />
Fasten with ø 3,0 x 15 mm or 3,0 x 13 mm<br />
countersunk wood screws, head ø 6 mm<br />
40<br />
Bottom<br />
Flap<br />
12<br />
1mm<br />
1mm<br />
Flap hinge Markant 11<br />
• Hinge parts are mounted separately in bottom panel and flap, enabling<br />
subsequent flap assembly<br />
• Flaps are aligned through independent height, side and depth adjustment<br />
• Identical hole dimensions in bottom panel and flap<br />
• Three screw fasteners ensure firm and exact hinge seating in bottom panel<br />
and flap<br />
• Hole edge break-out is hidden by covering lip<br />
• In open position, inside face edges of bottom panel and flap<br />
are flush before height adjustment<br />
• Precision die-cast zinc<br />
Finish Order no. PU<br />
nickel-plated 0 040 242 1/20<br />
bronze 0 040 243 1/20<br />
brass-plated 0 040 244 1/20<br />
Depth adjustment<br />
Height adjustment<br />
Side adjustment<br />
Hole pattern<br />
12<br />
ø35<br />
12,5<br />
30<br />
Specialty hinges 3.2.37
3.2.38<br />
Flap hinges 135 and 137<br />
Mounting example<br />
Flap hinge 135<br />
Flap hinge 137<br />
110°<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
2<br />
• Drawn brass, drilled and milled<br />
• With fixed brass pin<br />
• With semi-circular flaps for machine recessing<br />
• Flap hinge 135<br />
with countersunk holes on the outside<br />
• Flap hinge 137<br />
with countersunk holes on the inside<br />
• Solid brass<br />
Flap hinge 135<br />
1,5<br />
6<br />
9<br />
9<br />
Article Finish Order no. PU<br />
Flap hinge polished brass 0 042 581 1/20<br />
135<br />
high-gloss nickel-plated 0 042 585 1/20<br />
Flap hinge polished brass 0 042 582 1/20<br />
137<br />
high-gloss nickel-plated 0 042 586 1/20<br />
15<br />
9<br />
49,5<br />
ø3<br />
ø5<br />
Flap hinge 137<br />
Specialty hinges www.hettich.com<br />
30<br />
2<br />
1,5<br />
6<br />
9<br />
9<br />
15<br />
9<br />
49,5<br />
ø3<br />
ø5<br />
MASSIV SOLID<br />
MESSING BRASS<br />
30
MASSIV SOLID<br />
MESSING BRASS<br />
Mounting example<br />
Flap hinge 140<br />
Flap hinge 142<br />
110°<br />
Fasten with countersunk wood screws ø 3,5 DIN 97<br />
• Drawn brass, drilled and milled<br />
• With fixed stainless steel pin<br />
• With semi-circular flaps for machine recessing<br />
• Flap hinge 140<br />
with countersunk holes on the outside<br />
• Flap hinge 142<br />
with countersunk holes on the inside<br />
• Solid brass<br />
Flap hinges 140 and 142<br />
Article Finish Order no. PU<br />
Flap hinge polished brass 0 042 583 1/20<br />
140<br />
high-gloss nickel-plated 0 042 587 1/20<br />
Flap hinge polished brass 0 042 584 1/20<br />
142<br />
high-gloss nickel-plated 0 042 588 1/20<br />
Flap hinge 140<br />
2<br />
1,5<br />
13<br />
4,5 8,5<br />
10,5<br />
10,5<br />
47<br />
ø3<br />
ø5<br />
30<br />
Flap hinge 142<br />
2<br />
10,5<br />
10,5<br />
1,5<br />
4,5<br />
13<br />
8,5<br />
47<br />
ø3<br />
ø5<br />
30<br />
Specialty hinges 3.2.39
3.2.40<br />
Special-purpose hinge for corner cabinets 121<br />
Made of steel<br />
Mounting example<br />
• For (kitchen) corner cabinets<br />
• With steel pin<br />
• Usable left and right.<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 071 821 1/10<br />
2,5<br />
10<br />
10<br />
5<br />
Fasten with countersunk wood screws ø 3,5 DIN 97<br />
Specialty hinges www.hettich.com<br />
16<br />
10<br />
9,5<br />
100<br />
30
MASSIV SOLID<br />
MESSING BRASS<br />
Mounting example<br />
Special-purpose hinge for corner cabinets 121<br />
Made of brass<br />
• For corner cabinets<br />
• Drawn brass, drilled and milled<br />
• With fixed brass pin<br />
• Extremely durable and sturdy<br />
• Usable left and right<br />
• High-gloss nickel-plated brass<br />
Order no. PU<br />
0 068 574 1/10<br />
5<br />
10<br />
10<br />
2,25<br />
17<br />
10<br />
100<br />
Fasten with countersunk wood screws ø 3,5 DIN 97<br />
4<br />
8<br />
30<br />
Specialty hinges 3.2.41
3.2.42<br />
Table hinge 130<br />
Mounting example<br />
Fasten with countersunk wood screws ø 4 DIN 97<br />
• Drawn brass, drilled and milled<br />
• With 2 fixed steel pins and a double joint<br />
• With semi-circular flaps for machine recessing<br />
• Solid brass<br />
Finish Order no. PU<br />
polished brass 0 031 101 1/20<br />
nickel-plated brass 0 042 589 1/20<br />
5<br />
10<br />
10<br />
2<br />
Specialty hinges www.hettich.com<br />
16<br />
8<br />
6<br />
7,8<br />
70<br />
7,8<br />
30<br />
MASSIV SOLID<br />
MESSING BRASS
MASSIV SOLID<br />
MESSING BRASS<br />
Mounting example<br />
Size 25 x 60 mm Size 30 x 75 mm Size 35 x 100 mm<br />
5<br />
7,5<br />
7,5<br />
6<br />
18<br />
27<br />
ø6<br />
60<br />
25<br />
3,5 2 2,5<br />
27<br />
Fasten with<br />
countersunk wood screws ø 3 DIN 97<br />
6<br />
9<br />
9<br />
6<br />
• Drawn brass, drilled and milled<br />
• With fixed brass pin<br />
• Solid brass<br />
23<br />
ø7<br />
75<br />
4<br />
34 34<br />
Fasten with<br />
countersunk wood screws ø 3,5 DIN 97<br />
30<br />
2 2,5<br />
9<br />
30<br />
10,5<br />
10,5<br />
7<br />
ø8<br />
100<br />
Table hinge 120<br />
Finish Size PU<br />
25 x 60 mm 30 x 75 mm 35 x 100 mm<br />
polished brass – – 0 031 098 1/10<br />
high-gloss nickel-plated 0 042 332 0 042 335 0 031 099 1/10<br />
Fasten with<br />
countersunk wood screws ø 4 DIN 97<br />
4<br />
46 46<br />
35<br />
2,25 2,75<br />
Specialty hinges 3.2.43
3.2.44<br />
Mirror hinge Novi<br />
Mounting example<br />
3<br />
Approx. 90°<br />
30 1 30<br />
45°<br />
2<br />
16<br />
14<br />
19<br />
6<br />
• For 2- or 3-panel mirrors<br />
• Drawn brass, drilled and milled<br />
• With fixed stainless steel pin<br />
• Invisible from the outside<br />
• Fittings leave no break in the mirror surface<br />
• Minimal space between 2 mirrors<br />
• Holding feature at approx. 90° opening angle<br />
• Usable left and right<br />
• Brass, matt enamelled<br />
Order no. PU<br />
0 042 329 1/10<br />
2,5<br />
5<br />
10<br />
10<br />
Fasten with countersunk wood screws ø 3,5 DIN 97<br />
Specialty hinges www.hettich.com<br />
16<br />
8<br />
44 34<br />
78<br />
8<br />
4,5<br />
30<br />
MASSIV SOLID<br />
MESSING BRASS
3.2.45
3.3.0<br />
Range summary/Technical comparison<br />
3.3 Butt hinges<br />
Page number<br />
Mounting option<br />
Knuckle diameter mm 8<br />
Flap thickness mm 1,7<br />
Butt hinge 300<br />
3.3.3 - 3.3.5<br />
• Inset<br />
(straight)<br />
• Recessed<br />
(cranking B)<br />
• Rebated<br />
(cranking D 7,5)<br />
Hinge length mm 40/50/60<br />
Material<br />
MASSIV SOLID<br />
MESSING BRASS<br />
Finishes • polished brass<br />
• brushed matt brass<br />
• high-gloss nickel-plated<br />
• nickel-plated matt<br />
Butt hinge 260<br />
3.3.6 - 3.3.8<br />
• Inset<br />
(straight)<br />
• Recessed<br />
(cranking B)<br />
• Rebated<br />
(cranking D 7,5)<br />
6<br />
1,7<br />
50<br />
MASSIV SOLID<br />
MESSING BRASS<br />
• polished brass<br />
• high-gloss nickel-plated<br />
• nickel-plated matt<br />
Butt hinge 209<br />
3.3.9 - 3.3.11<br />
• Inset<br />
(straight)<br />
• Recessed<br />
(cranking B)<br />
• Rebated<br />
(cranking D 7,5)<br />
Butt hinges www.hettich.com<br />
11<br />
2<br />
80<br />
MASSIV SOLID<br />
MESSING BRASS<br />
• polished brass<br />
• high-gloss nickel-plated<br />
• nickel-plated matt<br />
Finial butt hinge 230<br />
3.3.12 - 3.3.14<br />
• Inset<br />
(straight)<br />
• Recessed<br />
(cranking B)<br />
• Rebated<br />
(cranking D 7,5)<br />
8<br />
1,7<br />
40/50/60<br />
MASSIV SOLID<br />
MESSING BRASS<br />
• polished brass<br />
• brown-coloured/<br />
knuckle brushed<br />
(antique)
Finial butt hinge<br />
270<br />
3.3.15 - 3.3.17<br />
• Inset<br />
(straight)<br />
• Recessed<br />
(cranking B)<br />
• Rebated<br />
(cranking D 7,5)<br />
6<br />
1,7<br />
50<br />
MASSIV SOLID<br />
MESSING BRASS<br />
• polished brass<br />
• brown-coloured/<br />
knuckle brushed<br />
(antique)<br />
Finial butt hinge<br />
212<br />
3.3.18 - 3.3.20<br />
• Inset<br />
(straight)<br />
• Recessed<br />
(cranking B)<br />
• Rebated<br />
(cranking D 7,5)<br />
11<br />
2<br />
80<br />
MASSIV SOLID<br />
MESSING BRASS<br />
• polished brass<br />
• brown-coloured/<br />
knuckle brushed<br />
(antique)<br />
Corner hinge 700<br />
3.3.21<br />
• Overlay<br />
(cranking L)<br />
7/8<br />
2/2,2<br />
50<br />
MASSIV SOLID<br />
MESSING BRASS<br />
• polished brass<br />
• high-gloss<br />
nickel-plated<br />
• nickel-plated matt<br />
Range summary/Technical comparison<br />
3.3 Butt hinges<br />
Cranked flush hinge<br />
4162<br />
3.3.22<br />
• Overlay<br />
(cranking L)<br />
4<br />
3<br />
40<br />
MASSIV SOLID<br />
MESSING BRASS<br />
• polished brass<br />
• high-gloss<br />
nickel-plated<br />
Butt hinge 100<br />
3.3.23 - 3.3.24<br />
• Inset<br />
(straight)<br />
3,5 - 6<br />
1,3 - 2,5<br />
20 - 80<br />
MASSIV SOLID<br />
MESSING BRASS<br />
• polished brass<br />
• smooth-polished<br />
brass<br />
• brushed matt brass<br />
• high-gloss<br />
nickel-plated<br />
• nickel-plated matt<br />
• high-gloss<br />
chrome-plated<br />
• chrome-plated<br />
matt<br />
Butt hinge 101<br />
3.3.25<br />
• Inset<br />
(straight)<br />
7/8<br />
2<br />
50/75<br />
MASSIV SOLID<br />
MESSING BRASS<br />
• polished brass<br />
• nickel-plated matt<br />
Butt hinges 3.3.1
3.3.2<br />
Butt hinges<br />
Technical information<br />
Door heights<br />
up to 2400<br />
Door flap<br />
Door flap<br />
Side flap<br />
Left-hand hinge Right-hand hinge<br />
up to 1800<br />
Max. door width 600<br />
up to 900<br />
Reference values for 19 mm chipboard,<br />
density 750 kp/m 3 .<br />
Number of hinges per door<br />
Door weight, door width, quality of the material and<br />
hinge mounting are important factors to be considered when<br />
determining the number of hinges required per door.<br />
Factors encountered in practise vary considerably. That is<br />
why the hinge numbers given in the diagram serve only as<br />
guidelines. If in doubt, it is best to make a trial mounting.<br />
For stability reasons, the hinge distance X must be chosen<br />
as large as possible.<br />
2<br />
3<br />
x<br />
4<br />
Left-handed and right-handed flaps of butt hinges<br />
To differentiate between the left and right flap of<br />
screw-on butt hinges, these must be folded open and<br />
viewed from the side with the countersunk holes<br />
for the screws.<br />
For a left-handed hinge, the door flap is on the left.<br />
For a right-handed hinge, the door flap is on the right.<br />
Mounting options<br />
Butt hinges www.hettich.com<br />
Side<br />
Flush door,<br />
straight<br />
Side<br />
Rebated door,<br />
cranking D<br />
Door<br />
Door<br />
Side<br />
Recessed door,<br />
cranking B<br />
Side<br />
Corner hinge<br />
Offset door,<br />
cranking L<br />
i<br />
Door<br />
Door
Side<br />
1 mm Reveal<br />
Door<br />
• Knuckle ø 8 mm<br />
• Flap thickness 1,7 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin and milled countersunk holes,<br />
without washer<br />
• Solid brass<br />
Butt hinge 300<br />
straight<br />
for inset doors<br />
Article Finish Hinge length 40 mm Hinge length 50 mm Hinge length 60 mm<br />
Order no. PU Order no. PU Order no. PU<br />
Butt hinge 300 left polished brass – – 0 031 000 1/10 0 031 963 1/10<br />
straight<br />
brushed matt brass – – 0 031 001 1/10 – –<br />
high-gloss nickel-plated – – 0 031 002 1/10 0 042 281 1/10<br />
nickel-plated matt 0 031 941 1/10 0 031 003 1/10 0 042 282 1/10<br />
Butt hinge 300 right polished brass – – 0 031 004 1/10 0 031 968 1/10<br />
straight<br />
brushed matt brass – – 0 031 005 1/10 – –<br />
high-gloss nickel-plated – – 0 031 006 1/10 0 031 966 1/10<br />
nickel-plated matt 0 031 944 1/10 0 031 007 1/10 0 031 965 1/10<br />
Mounting example<br />
MASSIV SOLID<br />
MESSING BRASS<br />
Fasten with countersunk<br />
wood screws ø 3 DIN 97<br />
Technical information see page 3.3.2<br />
Hinge length 40 mm<br />
8<br />
24<br />
1,7<br />
7<br />
13<br />
ø8<br />
40<br />
4,5<br />
13<br />
16 16<br />
20<br />
40<br />
0,5<br />
Hinge length 50 mm Hinge length 60 mm<br />
7<br />
18<br />
18<br />
1,7<br />
2<br />
7<br />
13<br />
ø8<br />
40<br />
4,5<br />
13<br />
16 16<br />
25<br />
50<br />
0,5<br />
7,5<br />
2<br />
22,5<br />
22,5<br />
1,7<br />
7<br />
13<br />
ø8<br />
40<br />
4,5<br />
13<br />
16 16<br />
30<br />
60<br />
0,5<br />
Butt hinges 3.3.3
3.3.4<br />
Butt hinge 300<br />
Cranking B<br />
for recessed doors<br />
Mounting example<br />
Side<br />
0,6 mm Reveal<br />
Fasten with countersunk<br />
wood screws ø 3 DIN 97<br />
Door<br />
Technical information see page 3.3.2<br />
Hinge length 40 mm<br />
8<br />
24<br />
1,7<br />
7<br />
13<br />
ø8<br />
40<br />
4,5<br />
13<br />
16 16<br />
20<br />
40<br />
4,6<br />
• Knuckle ø 8 mm<br />
• Flap thickness 1,7 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin and milled countersunk holes,<br />
without washer<br />
• Solid brass<br />
Hinge length 50 mm Hinge length 60 mm<br />
7<br />
18<br />
18<br />
1,7<br />
Butt hinges www.hettich.com<br />
2<br />
7<br />
13<br />
ø8<br />
40<br />
4,5<br />
13<br />
16 16<br />
25<br />
4,6<br />
50<br />
7,5<br />
2<br />
22,5<br />
22,5<br />
1,7<br />
MASSIV SOLID<br />
MESSING BRASS<br />
Article Finish Hinge length 40 mm Hinge length 50 mm Hinge length 60 mm<br />
Order no. PU Order no. PU Order no. PU<br />
Butt hinge 300 left polished brass – – 0 031 008 1/10 0 031 955 1/10<br />
Cranking B<br />
high-gloss nickel-plated – – 0 031 010 1/10 – –<br />
nickel-plated matt 0 031 934 1/10 0 031 011 1/10 0 042 286 1/10<br />
Butt hinge 300 right polished brass – – 0 031 012 1/10 0 031 957 1/10<br />
Cranking B<br />
high-gloss nickel-plated – – 0 031 014 1/10 – –<br />
nickel-plated matt 0 031 937 1/10 0 031 015 1/10 0 042 288 1/10<br />
7<br />
13<br />
ø8<br />
40<br />
4,5<br />
13<br />
16 16<br />
30<br />
4,6<br />
60
Mounting example<br />
Side<br />
MASSIV SOLID<br />
MESSING BRASS<br />
8<br />
24<br />
1,7<br />
11,8<br />
11,2<br />
5,5<br />
ø8<br />
33,3<br />
11<br />
7<br />
15,5<br />
4,5<br />
20<br />
40<br />
7<br />
1,5<br />
18<br />
18<br />
1,7<br />
11,8<br />
11,2<br />
Butt hinge 300<br />
Cranking D 7,5<br />
for rebated doors<br />
• Knuckle ø 8 mm<br />
• Flap thickness 1,7 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin and milled countersunk holes,<br />
without washer<br />
• Solid brass<br />
Article Finish Hinge length 40 mm Hinge length 50 mm Hinge length 60 mm<br />
Order no. PU Order no. PU Order no. PU<br />
Butt hinge 300 left polished brass – – 0 031 016 1/10 0 031 921 1/10<br />
Cranking D 7,5<br />
brushed matt brass – – 0 031 017 1/10 – –<br />
high-gloss nickel-plated – – 0 031 018 1/10 – –<br />
nickel-plated matt 0 031 931 1/10 0 031 019 1/10 0 031 924 1/10<br />
Butt hinge 300 right polished brass – – 0 031 020 1/10 0 031 917 1/10<br />
Cranking D 7,5<br />
brushed matt brass – – 0 031 021 1/10 – –<br />
high-gloss nickel-plated – – 0 031 022 1/10 – –<br />
nickel-plated matt 0 031 928 1/10 0 031 023 1/10 0 031 919 1/10<br />
0,6 mm Reveal<br />
7,5 mm rebate depth<br />
Fasten with countersunk<br />
wood screws ø 3 DIN 97<br />
Door<br />
Technical information see page 3.3.2<br />
Hinge length 40 mm<br />
Hinge length 50 mm Hinge length 60 mm<br />
5,5<br />
ø8<br />
33,3<br />
11<br />
7<br />
15,5<br />
2<br />
4,5<br />
25<br />
50<br />
7<br />
23<br />
1,5<br />
23<br />
1,7<br />
11,8<br />
11,2<br />
5,5<br />
ø8<br />
33,3<br />
11<br />
7,5<br />
15,5<br />
2<br />
4,5<br />
30<br />
60<br />
Butt hinges 3.3.5
3.3.6<br />
Butt hinge 260<br />
straight<br />
for inset doors<br />
Mounting example<br />
Side<br />
1 mm Reveal<br />
Door<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
• Knuckle ø 6 mm<br />
• Flap thickness 1,7 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin and washer<br />
• Solid brass<br />
Article Finish Order no. PU<br />
Butt hinge 260 left polished brass 0 042 413 1/20<br />
straight<br />
nickel-plated matt 0 042 415 1/20<br />
high-gloss nickel-plated 0 042 416 1/20<br />
Butt hinge 260 right polished brass 0 042 417 1/20<br />
straight<br />
nickel-plated matt 0 042 419 1/20<br />
high-gloss nickel-plated 0 042 420 1/20<br />
Technical information see page 3.3.2<br />
Hinge length 50 mm<br />
Butt hinges www.hettich.com<br />
7<br />
1,7<br />
18<br />
18<br />
8,5<br />
15<br />
17<br />
2<br />
ø6<br />
40<br />
3,5<br />
15<br />
17<br />
MASSIV SOLID<br />
MESSING BRASS<br />
24<br />
50<br />
0,5
Mounting example<br />
MASSIV SOLID<br />
MESSING BRASS<br />
Side<br />
0,7 mm Reveal<br />
Door<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
Technical information see page 3.3.2<br />
• Knuckle ø 6 mm<br />
• Flap thickness 1,7 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin and washer<br />
• Solid brass<br />
Hinge length 50 mm<br />
7<br />
18<br />
18<br />
1,7<br />
8,5 15<br />
2<br />
15 ø6<br />
40<br />
3,5<br />
17 17<br />
Butt hinge 260<br />
Cranking B<br />
for recessed doors<br />
Article Finish Order no. PU<br />
Butt hinge 260 left<br />
Cranking B<br />
nickel-plated matt 0 042 423 1/20<br />
Butt hinge 260 right<br />
Cranking B<br />
nickel-plated matt 0 042 451 1/20<br />
24<br />
50<br />
3,7<br />
Butt hinges 3.3.7
3.3.8<br />
Butt hinge 260<br />
Cranking D 7,5<br />
for rebated doors<br />
Mounting example<br />
Side<br />
0,6 mm Reveal<br />
7,5 mm rebate depth<br />
Door<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
• Knuckle ø 6 mm<br />
• Flap thickness 1,7 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin and washer<br />
• Solid brass<br />
Article Finish Order no. PU<br />
Butt hinge 260 left polished brass 0 042 453 1/20<br />
Cranking D 7,5<br />
nickel-plated matt 0 042 455 1/20<br />
Butt hinge 260 right polished brass 0 042 457 1/20<br />
Cranking D 7,5<br />
nickel-plated matt 0 042 459 1/20<br />
Technical information see page 3.3.2<br />
Hinge length 50 mm<br />
Butt hinges www.hettich.com<br />
7<br />
18<br />
18<br />
1,7<br />
10,8<br />
10,2<br />
1,5<br />
5,5 8,5<br />
11<br />
ø6<br />
32,2<br />
2<br />
3,5<br />
16,2<br />
24<br />
MASSIV SOLID<br />
MESSING BRASS<br />
50
Side<br />
1 mm Reveal<br />
Door<br />
• Knuckle ø 11 mm<br />
• Flap thickness 2 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin and washer<br />
• Solid brass<br />
Butt hinge 209<br />
straight<br />
for inset doors<br />
Article Finish Order no. PU<br />
Butt hinge 209 left polished brass 0 031 042 1/10<br />
straight<br />
nickel-plated matt 0 031 046 1/10<br />
high-gloss nickel-plated 0 031 048 1/10<br />
Butt hinge 209 right polished brass 0 031 043 1/10<br />
straight<br />
nickel-plated matt 0 031 047 1/10<br />
high-gloss nickel-plated 0 031 049 1/10<br />
Mounting example<br />
MASSIV SOLID<br />
MESSING BRASS<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
Technical information see page 3.3.2<br />
Hinge length 80 mm<br />
8<br />
32<br />
32<br />
2<br />
6<br />
13<br />
ø11<br />
45<br />
6<br />
13<br />
17 17<br />
39<br />
0,5<br />
80<br />
Butt hinges 3.3.9
3.3.10<br />
Butt hinge 209<br />
Cranking B<br />
for recessed doors<br />
Mounting example<br />
Side<br />
1 mm Reveal<br />
Door<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
• Knuckle ø 11 mm<br />
• Flap thickness 2 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin and washer<br />
• Solid brass<br />
Article Finish Order no. PU<br />
Butt hinge 209 left polished brass 0 031 050 1/10<br />
Cranking B<br />
nickel-plated matt 0 031 054 1/10<br />
high-gloss nickel-plated 0 031 056 1/10<br />
Butt hinge 209 right polished brass 0 031 051 1/10<br />
Cranking B<br />
nickel-plated matt 0 031 055 1/10<br />
high-gloss nickel-plated 0 031 057 1/10<br />
Technical information see page 3.3.2<br />
Hinge length 80 mm<br />
Butt hinges www.hettich.com<br />
8<br />
32<br />
32<br />
2<br />
6<br />
13<br />
ø11<br />
45<br />
6<br />
13<br />
17 17<br />
MASSIV SOLID<br />
MESSING BRASS<br />
6,5<br />
39<br />
80
• Knuckle ø 11 mm<br />
• Flap thickness 2 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin and washer<br />
• Solid brass<br />
Butt hinge 209<br />
Cranking D 7,5<br />
for rebated doors<br />
Article Finish Order no. PU<br />
Butt hinge 209 left polished brass 0 031 058 1/10<br />
Cranking D 7,5<br />
nickel-plated matt 0 031 062 1/10<br />
Butt hinge 209 right polished brass 0 031 059 1/10<br />
Cranking D 7,5<br />
nickel-plated matt 0 031 063 1/10<br />
Mounting example<br />
MASSIV SOLID<br />
MESSING BRASS<br />
Side<br />
1 mm Reveal<br />
7,5 mm rebate depth<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
Technical information see page 3.3.2<br />
Door<br />
Hinge length 80 mm<br />
9<br />
31<br />
31<br />
2<br />
13,5<br />
12,5<br />
7<br />
19<br />
ø11<br />
45<br />
16,2<br />
6<br />
39<br />
80<br />
Butt hinges 3.3.11
3.3.12<br />
Finial butt hinge 230<br />
straight<br />
for inset doors<br />
Side<br />
1 mm Reveal<br />
Door<br />
Technical information see page 3.3.2<br />
• Knuckle ø 8 mm<br />
• Flap thickness 1,7 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin, washer and ZK 19 finials<br />
• Solid brass<br />
Article Finish Hinge length 50 mm Hinge length 60 mm<br />
Order no. PU Order no. PU<br />
Finial butt hinge 230 left polished brass 0 031 024 1/10 0 042 062 1/10<br />
straight<br />
brown-coloured/<br />
knuckle brushed (antique)<br />
0 031 026 1/10 0 042 063 1/10<br />
Finial butt hinge 230 right polished brass 0 031 027 1/10 0 042 065 1/10<br />
straight<br />
brown-coloured/<br />
knuckle brushed (antique)<br />
0 031 029 1/10 0 042 066 1/10<br />
Mounting example<br />
Fasten with countersunk<br />
wood screws ø 3 DIN 97<br />
Hinge length 50 mm Hinge length 60 mm<br />
1,7<br />
7<br />
18<br />
18<br />
7<br />
13<br />
2<br />
40<br />
ø8<br />
4,5<br />
13<br />
16 16<br />
24<br />
0,5<br />
50 78<br />
Butt hinges www.hettich.com<br />
7,5<br />
22,5<br />
22,5<br />
7<br />
2<br />
13<br />
40<br />
ø8<br />
13<br />
29<br />
1,7 4,5 0,5<br />
16<br />
16<br />
MASSIV SOLID<br />
MESSING BRASS<br />
60 88
Mounting example<br />
Fasten with countersunk<br />
wood screws ø 3 DIN 97<br />
Technical information see page 3.3.2<br />
• Knuckle ø 8 mm<br />
• Flap thickness 1,7 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin, washer and ZK 19 finials<br />
• Solid brass<br />
Finial butt hinge 230<br />
Cranking B<br />
for recessed doors<br />
Article Finish Hinge length 40 mm Hinge length 60 mm<br />
Order no. PU Order no. PU<br />
Finial butt hinge 230 left brown-coloured/ 0 042 027 1/10 0 042 057 1/10<br />
Cranking B knuckle brushed (antique)<br />
Finial butt hinge 230 right brown-coloured/ 0 042 295 1/10 0 042 297 1/10<br />
Cranking B knuckle brushed (antique)<br />
Side<br />
MASSIV SOLID<br />
MESSING BRASS<br />
0,6 mm Reveal<br />
Door<br />
Hinge length 40 mm<br />
24<br />
1,7<br />
8<br />
7<br />
13<br />
16<br />
40<br />
ø8<br />
13<br />
19<br />
4,5 4,6<br />
16<br />
40 68<br />
Hinge length 60 mm<br />
7,5<br />
22,5<br />
22,5<br />
1,7<br />
7<br />
1,5<br />
13<br />
40<br />
ø8<br />
4,5<br />
13<br />
16 16<br />
29<br />
4,6<br />
60 88<br />
Butt hinges 3.3.13
3.3.14<br />
Finial butt hinge 230<br />
Cranking D 7,5<br />
for rebated doors<br />
Mounting example<br />
Fasten with countersunk<br />
wood screws ø 3 DIN 97<br />
Technical information see page 3.3.2<br />
• Knuckle ø 8 mm<br />
• Flap thickness 1,7 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin, washer and ZK 19 finials<br />
• Solid brass<br />
Article Finish Hinge length 50 mm Hinge length 60 mm<br />
Order no. PU Order no. PU<br />
Finial butt hinge 230 left polished brass 0 031 036 1/10 0 042 036 1/10<br />
Cranking D 7,5<br />
brown-coloured/<br />
knuckle brushed (antique)<br />
0 031 038 1/10 0 042 038 1/10<br />
Finial butt hinge 230 right polished brass 0 031 039 1/10 0 042 040 1/10<br />
Cranking D 7,5<br />
brown-coloured/<br />
knuckle brushed (antique)<br />
0 031 041 1/10 0 042 042 1/10<br />
Side<br />
0,6 mm Reveal<br />
7,5 mm rebate depth<br />
Door<br />
Hinge length 50 mm Hinge length 60 mm<br />
1,7<br />
11,8<br />
11,2<br />
7<br />
18<br />
18<br />
5,5 7<br />
1,5<br />
11<br />
33,3<br />
ø8<br />
1,5<br />
15,5<br />
4,5<br />
24<br />
50<br />
78<br />
Butt hinges www.hettich.com<br />
11,8<br />
11,2<br />
7<br />
23<br />
23<br />
5,5 7<br />
1,5<br />
1,7 11<br />
33,3<br />
ø8<br />
1,5<br />
15,5<br />
MASSIV SOLID<br />
MESSING BRASS<br />
4,5<br />
29<br />
60 88
Mounting example<br />
MASSIV SOLID<br />
MESSING BRASS<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
Technical information see page 3.3.2<br />
• Knuckle ø 6 mm<br />
• Flap thickness 1,7 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin, washer and ZK 19 finials<br />
• Solid brass<br />
Finial butt hinge 270<br />
straight<br />
for inset doors<br />
Article Finish Order no. PU<br />
Finial butt hinge 270 left brown-coloured/ 0 042 010 1/20<br />
straight knuckle brushed (antique)<br />
Finial butt hinge 270 right brown-coloured/ 0 042 014 1/20<br />
straight knuckle brushed (antique)<br />
Side<br />
1 mm Reveal<br />
Door<br />
Hinge length 50 mm<br />
1,7<br />
7<br />
18<br />
18<br />
8,5<br />
15<br />
2<br />
40<br />
15<br />
ø6<br />
3,5<br />
17 17<br />
24<br />
0,5<br />
50 74<br />
Butt hinges 3.3.15
3.3.16<br />
Finial butt hinge 270<br />
Cranking B<br />
for recessed doors<br />
Mounting example Hinge length 50 mm<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
Technical information see page 3.3.2<br />
• Knuckle ø 6 mm<br />
• Flap thickness 1,7 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin, washer and ZK 19 finials<br />
• Solid brass<br />
Article Finish Order no. PU<br />
Finial butt hinge 270 left brown-coloured/ 0 042 000 1/20<br />
Cranking B knuckle brushed (antique)<br />
Finial butt hinge 270 right brown-coloured/ 0 042 003 1/20<br />
Cranking B knuckle brushed (antique)<br />
Side<br />
0,7 mm Reveal<br />
Door<br />
Butt hinges www.hettich.com<br />
1,7<br />
7<br />
18<br />
18<br />
8,5<br />
15<br />
2<br />
40<br />
15<br />
ø6<br />
17 17<br />
MASSIV SOLID<br />
MESSING BRASS<br />
24<br />
3,5 3,7<br />
50 74
Mounting example<br />
MASSIV SOLID<br />
MESSING BRASS<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
Technical information see page 3.3.2<br />
• Knuckle ø 6 mm<br />
• Flap thickness 1,7 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin, washer and ZK 19 finials<br />
• Solid brass<br />
Hinge length 50 mm<br />
Finial butt hinge 270<br />
Cranking D 7,5<br />
for rebated doors<br />
Article Finish Order no. PU<br />
Finial butt hinge 270 left polished brass 0 031 987 1/20<br />
Cranking D 7,5<br />
brown-coloured/<br />
knuckle brushed (antique)<br />
0 042 302 1/20<br />
Finial butt hinge 270 right polished brass 0 031 990 1/20<br />
Cranking D 7,5<br />
brown-coloured/<br />
knuckle brushed (antique)<br />
0 031 992 1/20<br />
Side<br />
0,6 mm Reveal<br />
7,5 mm rebate depth<br />
Door<br />
18<br />
18<br />
7<br />
1,7<br />
10,8<br />
10,2<br />
5,5<br />
11<br />
1,5<br />
32,2<br />
ø6<br />
16,2<br />
8<br />
1,5<br />
3,5<br />
24<br />
50 74<br />
Butt hinges 3.3.17
3.3.18<br />
Finial butt hinge 212<br />
straight<br />
for inset doors<br />
Technical information see page 3.3.2<br />
• Knuckle ø 11 mm<br />
• Flap thickness 2 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin, washer and ZK 19 finials<br />
• Solid brass<br />
Article Finish Order no. PU<br />
Finial butt hinge 212 left polished brass 0 031 066 1/10<br />
straight<br />
brown-coloured/<br />
knuckle brushed (antique)<br />
0 031 068 1/10<br />
Finial butt hinge 212 right<br />
straight<br />
polished brass 0 031 067 1/10<br />
Mounting example Hinge length 80 mm<br />
Side<br />
1 mm Reveal<br />
Door<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
Butt hinges www.hettich.com<br />
8<br />
32<br />
32<br />
2<br />
6 13<br />
13<br />
17<br />
45<br />
6<br />
ø11<br />
17<br />
MASSIV SOLID<br />
MESSING BRASS<br />
39<br />
0,5<br />
80<br />
124
Mounting example<br />
MASSIV SOLID<br />
MESSING BRASS<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
Technical information see page 3.3.2<br />
• Knuckle ø 11 mm<br />
• Flap thickness 2 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin, washer and ZK 19 finials<br />
• Solid brass<br />
Hinge length 80 mm<br />
Finial butt hinge 212<br />
Cranking B<br />
for recessed doors<br />
Article Finish Order no. PU<br />
Finial butt hinge 212 left<br />
Cranking B<br />
polished brass 0 031 070 1/10<br />
Finial butt hinge 212 right<br />
Cranking B<br />
polished brass 0 031 071 1/10<br />
Side<br />
1 mm Reveal<br />
Door<br />
8<br />
32<br />
32<br />
2<br />
6<br />
13<br />
17<br />
ø11<br />
45<br />
13<br />
39<br />
6 6,5<br />
17<br />
80 124<br />
Butt hinges 3.3.19
3.3.20<br />
Finial butt hinge 212<br />
Cranking D 7,5<br />
for rebated doors<br />
Mounting example Hinge length 80 mm<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
Technical information see page 3.3.2<br />
• Knuckle ø 11 mm<br />
• Flap thickness 2 mm<br />
• Drawn brass, drilled and milled<br />
• With steel pin, washer and ZK 19 finials<br />
• Solid brass<br />
Article Finish Order no. PU<br />
Finial butt hinge 212 left polished brass 0 031 074 1/10<br />
Cranking D 7,5<br />
brown-coloured/<br />
knuckle brushed (antique)<br />
0 031 076 1/10<br />
Finial butt hinge 212 right polished brass 0 031 075 1/10<br />
Cranking D 7,5<br />
brown-coloured/<br />
knuckle brushed (antique)<br />
0 031 077 1/10<br />
Side<br />
1 mm Reveal<br />
7,5 mm rebate depth<br />
Door<br />
Butt hinges www.hettich.com<br />
8<br />
32<br />
32<br />
2<br />
13,5<br />
12,5<br />
6<br />
13<br />
19<br />
ø11<br />
45<br />
13<br />
16,2<br />
6<br />
MASSIV SOLID<br />
MESSING BRASS<br />
39<br />
80 124
Mounting example<br />
Side<br />
MASSIV SOLID<br />
MESSING BRASS<br />
Technical information see page 3.3.2<br />
Door thickness 16 -17 mm<br />
50<br />
25<br />
7<br />
2 2<br />
14,5 ø8<br />
32,5<br />
15,5<br />
17<br />
7<br />
4,5<br />
9<br />
16<br />
16<br />
2,2<br />
17,3<br />
50<br />
• Drawn brass, drilled and milled<br />
• With steel pin, without washer<br />
• Opening angle 270°<br />
• Solid brass<br />
Door thickness 18 - 20 mm Door thickness 20 - 21 mm<br />
25<br />
10<br />
6,5<br />
2 2<br />
19 ø7<br />
35,5<br />
20<br />
15,5<br />
4<br />
9<br />
16<br />
16<br />
2<br />
21<br />
50<br />
25<br />
10<br />
7<br />
3 2<br />
19 ø8<br />
37<br />
20<br />
17<br />
4,5<br />
9<br />
16<br />
16<br />
2<br />
21<br />
Corner hinge 700<br />
Cranking L<br />
for overlay doors<br />
Article Finish Door thickness Door thickness Door thickness Door thickness<br />
16 - 17 mm 18 - 20 mm 20 - 21 mm 22 - 23 mm<br />
Order no. PU Order no. PU Order no. PU Order no. PU<br />
Corner hinge 700 polished brass - - 0 031 090 1/10 - - - -<br />
left<br />
high-gloss<br />
nickel-plated<br />
0 031 892 1/10 0 031 092 1/10 - - 0031863 1/10<br />
nickel-plated matt 0 031 893 1/10 0 031 093 1/10 0042798 1/10 0031864 1/10<br />
Corner hinge 700 polished brass - - 0 031 094 1/10 - - - -<br />
right<br />
high-gloss<br />
nickel-plated<br />
0 031 888 1/10 0 031 096 1/10 - - 0031860 1/10<br />
nickel-plated matt 0 031 889 1/10 0 031 097 1/10 0042802 1/10 0031861 1/10<br />
Door<br />
Fasten with countersunk<br />
wood screws ø 3 DIN 97<br />
Door thickness 22 - 23 mm<br />
50<br />
25<br />
13<br />
3 3<br />
21,5 ø8<br />
42,5<br />
22,5<br />
20<br />
10<br />
4,5<br />
16<br />
16<br />
Butt hinges 3.3.21<br />
9<br />
2,2<br />
23,5
3.3.22<br />
Cranked flush hinge 4162<br />
for overlay doors<br />
Technical information see page 3.3.2<br />
• Door thickness 16 - 20 mm<br />
• Drawn brass, drilled and milled<br />
• With fixed stainless steel pin<br />
• Opening angle 220°<br />
• Solid brass<br />
Finish Order no. PU<br />
polished brass 0 042 592 1/10<br />
high-gloss nickel-plated 0 042 593 1/10<br />
Mounting example Door thickness 16 - 20 mm<br />
Side<br />
Door<br />
Fasten with countersunk wood screws ø 3 DIN 97<br />
Butt hinges www.hettich.com<br />
40<br />
5<br />
15<br />
15<br />
21<br />
21,5<br />
3<br />
4<br />
9<br />
ø4<br />
17<br />
2<br />
53<br />
17 10<br />
40<br />
MASSIV SOLID<br />
MESSING BRASS<br />
3<br />
20
• Drawn brass, drilled and milled<br />
• With fixed brass pin<br />
• Solid brass<br />
Butt hinge 100<br />
straight<br />
for inset doors<br />
Size a x b mm Finish Order no. PU<br />
20 x 16 high-gloss nickel-plated 0 042 635 1/20<br />
nickel-plated matt 0 042 636 1/20<br />
Mounting example<br />
Door<br />
Side<br />
Side<br />
MASSIV SOLID<br />
MESSING BRASS<br />
Door<br />
Fasten with<br />
countersunk<br />
wood screws<br />
DIN 97<br />
(ø see table)<br />
b<br />
= =<br />
d1<br />
d2<br />
S2<br />
a<br />
S1<br />
For other brass hinges 100 see page 3.3.24<br />
Size d1 d2 S1 S2 Screw DIN 97<br />
a x b mm mm mm mm mm holes ø mm<br />
20 x 16 3,5 2,0 1,3 1,0 4 2,0<br />
25 x 20 4,0 2,5 1,5 1,2 4 2,5<br />
30 x 20 4,0 2,5 1,5 1,2 4 2,5<br />
40 x 20 4,0 2,5 1,5 1,2 4 2,5<br />
40 x 30 4,0 2,5 1,5 1,2 4 3,0<br />
50 x 30 4,5 2,5 1,8 1,5 6 3,0<br />
40 x 40 4,5 2,5 1,8 1,5 4 3,0<br />
50 x 40 4,5 2,5 1,8 1,5 6 3,0<br />
60 x 40 5,5 3,0 2,25 1,75 6 3,5<br />
50 x 50 5,0 3,0 2,0 1,5 6 3,0<br />
60 x 50 5,0 3,0 2,0 1,5 6 3,0<br />
80 x 50 6,5 3,5 2,5 2,0 6 3,5<br />
80 x 60 6,0 3,5 2,5 2,0 6 3,5<br />
Butt hinges 3.3.23
3.3.24<br />
Butt hinge 100<br />
straight<br />
for inset doors<br />
Size<br />
a x b mm<br />
Finish Order no. PU<br />
25 x 20 high-gloss nickel-plated 0 042 641 1/20<br />
high-gloss chrome-plated 0 042 643 1/20<br />
30 x 20 polished brass 0 042 545 1/20<br />
nickel-plated matt 0 042 648 1/20<br />
high-gloss chrome-plated 0 042 649 1/20<br />
40 x 20 polished brass 0 042 546 1/20<br />
high-gloss nickel-plated 0 042 653 1/20<br />
nickel-plated matt 0 042 654 1/20<br />
40 x 30 smooth-polished brass 0 031 103 1/10<br />
polished brass 0 042 548 1/10<br />
high-gloss nickel-plated 0 042 665 1/10<br />
nickel-plated matt 0 042 666 1/10<br />
high-gloss chrome-plated 0 042 667 1/10<br />
50 x 30 smooth-polished brass 0 042 252 1/10<br />
polished brass 0 042 549 1/10<br />
brushed matt brass 0 042 670 1/10<br />
nickel-plated matt 0 042 672 1/10<br />
high-gloss chrome-plated 0 042 673 1/10<br />
chrome-plated matt 0 042 674 1/10<br />
40 x 40 nickel-plated matt 0 042 678 1/10<br />
high-gloss chrome-plated 0 042 679 1/10<br />
50 x 40 smooth-polished brass 0 031 104 1/10<br />
polished brass 0 042 551 1/10<br />
brushed matt brass 0 042 682 1/10<br />
high-gloss nickel-plated 0 042 683 1/10<br />
nickel-plated matt 0 042 684 1/10<br />
60 x 40 smooth-polished brass 0 031 105 1/10<br />
polished brass 0 042 552 1/10<br />
brushed matt brass 0 042 688 1/10<br />
high-gloss nickel-plated 0 042 689 1/10<br />
nickel-plated matt 0 042 690 1/10<br />
high-gloss chrome-plated 0 042 691 1/10<br />
chrome-plated matt 0 042 692 1/10<br />
50 x 50 nickel-plated matt 0 042 696 1/10<br />
60 x 50 polished brass 0 042 554 1/10<br />
high-gloss nickel-plated 0 042 701 1/10<br />
nickel-plated matt 0 042 702 1/10<br />
high-gloss chrome-plated 0 042 703 1/10<br />
80 x 50 smooth-polished brass 0 042 338 1/10<br />
polished brass 0 042 555 1/10<br />
nickel-plated matt 0 042 708 1/10<br />
high-gloss chrome-plated 0 042 709 1/10<br />
80 x 60 smooth-polished brass 0 031 106 1/10<br />
polished brass 0 042 556 1/10<br />
high-gloss nickel-plated 0 042 713 1/10<br />
nickel-plated matt 0 042 714 1/10<br />
MASSIV SOLID<br />
MESSING BRASS<br />
Butt hinges www.hettich.com
Mounting example<br />
• Drawn brass, drilled and milled<br />
• With fixed brass pin<br />
• Adjustable in two dimensions:<br />
Height adjustment: ± 1 mm<br />
Depth adjustment: ± 1,5 mm<br />
• Solid brass<br />
Finish Hinge length 50 mm Hinge length 75 mm<br />
without decorative finials without decorative with decorative<br />
finials finials ZK 19<br />
Butt hinge 101<br />
straight<br />
for inset doors<br />
Order no. Order no. Order no. PU<br />
polished brass – – 0 079 414 1/10<br />
nickel-plated matt 0 079 406 0 079 412 – 1/10<br />
Door<br />
Side<br />
Side<br />
MASSIV SOLID<br />
MESSING BRASS<br />
2 mm Reveal<br />
Door<br />
Hinge length 50 mm<br />
50<br />
5<br />
40<br />
ø2<br />
3,5<br />
20<br />
ø7<br />
14,5<br />
4,5<br />
2<br />
16<br />
2<br />
Hinge length 75 mm<br />
75<br />
60<br />
5,5<br />
ø2<br />
21<br />
with decorative finials<br />
ZK 19<br />
3,5<br />
ø8<br />
14,5<br />
6<br />
2<br />
30<br />
2<br />
Butt hinges 3.3.25
3.3.26<br />
www.hettich.com
i<br />
Flap fitting system Lift Top<br />
Range summary/Technical comparison<br />
3.4.2 - 3.4.3<br />
Top box hinge Lift Up<br />
3.4.36<br />
Flap stays<br />
3.4.46 - 3.4.54<br />
Flap fitting system Lift Advanced<br />
Range summary/Technical comparison<br />
3.4.12 - 3.4.13<br />
Flap fittings Lift<br />
3.4.37 - 3.4.40<br />
Vertical lift-up flap fittings<br />
3.4.30 - 3.4.35<br />
Top box stays<br />
3.4.41 - 3.4.45<br />
Range summary<br />
3.4 Flap fittings<br />
Flap fittings 3.4.1
3.4.2<br />
Range summary/Technical comparison<br />
Flap fitting system Lift Top<br />
Page number<br />
Lift Top HF<br />
3.4.4 - 3.4.5<br />
Flap movement Folding-flap fitting<br />
Flap weight max. 18 kg<br />
Opening/closing force adjustable ✓<br />
Silent System integrated Dampened opening and closing movement<br />
Door/door-frame material Wood/wood, aluminium<br />
Inside cabinet dimensions<br />
Height<br />
Depth<br />
Width<br />
Front panel adjustment<br />
Height<br />
Side<br />
Depth<br />
670 - 688 mm / 752 - 768 mm<br />
min. 280 mm<br />
min. 300 mm<br />
±2 mm<br />
±2 mm<br />
±2 mm<br />
Material<br />
of housing/hinge mechanism Highly polished aluminium<br />
Lift Top HK<br />
3.4.6 - 3.4.7<br />
Flap fitting<br />
max. 27 kg<br />
Dampened opening and closing movement<br />
Wood/wood, aluminium<br />
234 - 682 mm<br />
min. 280 mm<br />
min. 300 mm<br />
±2 mm<br />
±2 mm<br />
±2 mm<br />
Highly polished aluminium<br />
Flap fittings www.hettich.com<br />
✓<br />
i
i<br />
Lift Top HL<br />
3.4.8 - 3.4.9<br />
Flap lift fitting<br />
max. 20 kg<br />
✓<br />
Dampened opening and closing movement<br />
Wood/wood, aluminium<br />
min. 342 mm / min. 372 mm<br />
min. 280 mm<br />
min. 300 mm<br />
±2 mm<br />
±2 mm<br />
±2 mm<br />
Highly polished aluminium<br />
Lift Top HS<br />
3.4.10 - 3.4.11<br />
Lift-up flap fitting<br />
max. 22 kg<br />
✓<br />
Dampened opening and closing movement<br />
Wood/wood, aluminium<br />
372 - 682 mm<br />
min. 280 mm<br />
min. 300 mm<br />
±2 mm<br />
±2 mm<br />
±2 mm<br />
Highly polished aluminium<br />
Range summary/Technical comparison<br />
Flap fitting system Lift Top<br />
Flap fittings 3.4.3
3.4.4<br />
Folding-flap fitting<br />
Lift Top HF<br />
Installation requirement:<br />
The two fronts must always be the same size.<br />
Internal cabinet height<br />
mm<br />
670 - 688<br />
752 - 768<br />
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 kg<br />
0 040 538<br />
0 040 541<br />
• For wooden fronts and wood or aluminium framed fronts<br />
• Max. flap/door weight 18 kg<br />
• Opening angle 88°<br />
• Adjustable opening and closing force<br />
• Silent System integrated –<br />
dampened opening and closing movement<br />
• Fitted with gas springs either side<br />
• Ball-bearing joint mechanism<br />
• Identical cabinet drilling pattern for Lift Top HF/HK/HL/HS<br />
• Screws pre-mounted in the housing for rational assembly<br />
• Three-dimensional front adjustment :<br />
Height ± 2 mm, side ± 2 mm, depth ± 2 mm<br />
• Inside cabinet dimensions:<br />
Height 670 - 688 mm / 752 - 768 mm<br />
Depth min. 280 mm<br />
Width min. 300 mm<br />
• Housing and joint mechanism in highly polished aluminium<br />
Set contains:<br />
1 each flap fitting right/left<br />
3 connecting hinges<br />
2 front adapters<br />
Fixing accessories<br />
Flap weight in kg/Order no. PU<br />
0 040 539<br />
0 040 542<br />
0 040 540<br />
0 040 543<br />
Flap fittings www.hettich.com<br />
1 set
Cabinet drilling pattern<br />
Internal<br />
cabinet height<br />
670 - 688<br />
Internal<br />
cabinet height<br />
752 - 768<br />
130<br />
130<br />
55<br />
55<br />
50<br />
50<br />
88°<br />
88°<br />
min. 280<br />
Hole ø 10 x 16<br />
243<br />
120<br />
54<br />
55<br />
120 158<br />
Cabinet size Front dimensions<br />
Internal<br />
cabinet height<br />
670 - 688<br />
Internal<br />
cabinet height<br />
752 - 768<br />
A<br />
A<br />
A = Overlay<br />
ø5x12<br />
14,5<br />
3<br />
14,5<br />
ø5x12<br />
14,5<br />
3<br />
14,5<br />
Folding-flap fitting<br />
Lift Top HF<br />
Assembly<br />
ø10x16<br />
32<br />
ø10x16<br />
ø10x16<br />
32<br />
ø10x16<br />
14,5 + A<br />
14,5 + A<br />
136<br />
70<br />
3<br />
38,5<br />
24<br />
min.<br />
50<br />
136<br />
70<br />
3<br />
36,5<br />
24<br />
min.<br />
50<br />
!<br />
!<br />
Flap fittings 3.4.5
3.4.6<br />
Flap fitting<br />
Lift Top HK<br />
Internal cabinet height<br />
mm<br />
234 - 420<br />
421 - 520<br />
521 - 580<br />
581 - 640<br />
641 - 682<br />
• For wooden fronts and wood or aluminium framed fronts<br />
• Max. flap/door weight 27 kg<br />
• Opening angle 88°<br />
• Adjustable opening and closing force<br />
• Silent System integrated –<br />
dampened opening and closing movement<br />
• Fitted with gas springs either side<br />
• Ball-bearing joint mechanism<br />
• Identical cabinet drilling pattern for Lift Top HF/HK/HL/HS<br />
• Screws pre-mounted in the housing for rational assembly<br />
• Three-dimensional front adjustment :<br />
Height ± 2 mm, side ± 2 mm, depth ± 2 mm<br />
• Inside cabinet dimensions:<br />
Height 234 - 682 mm<br />
Depth min. 280 mm<br />
Width min. 300 mm<br />
• Housing and joint mechanism in highly polished aluminium<br />
Set contains:<br />
1 each flap fitting right/left<br />
2 front adapters<br />
Fixing accessories<br />
Flap weight in kg/Order no. PU<br />
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 kg<br />
0 040 544<br />
0 040 544<br />
0 040 544<br />
0 040 544<br />
0 040 544<br />
0 040 545<br />
0 040 545<br />
0 040 545<br />
0 040 545<br />
0 040 545<br />
0 040 546<br />
0 040 546<br />
0 040 546<br />
0 040 546<br />
0 040 546<br />
0 040 547<br />
0 040 547<br />
0 040 547<br />
0 040 547<br />
Flap fittings www.hettich.com<br />
1 set
Internal<br />
cabinet<br />
height<br />
234 - 682<br />
Cabinet drilling pattern<br />
min. 280<br />
Hole ø 10 x 16<br />
243<br />
120<br />
54<br />
55<br />
120 158<br />
Cabinet size Front dimensions<br />
55<br />
88°<br />
Internal<br />
cabinet<br />
height<br />
234 - 682<br />
A<br />
A = Overlay<br />
Flap fitting<br />
Lift Top HK<br />
Assembly<br />
ø10x16<br />
14,5 + A<br />
136<br />
70<br />
Flap fittings 3.4.7
3.4.8<br />
Flap lift fitting<br />
Lift Top HL<br />
Minimum internal cabinet<br />
height<br />
mm<br />
min. 342<br />
min. 372<br />
• For wooden fronts and wood or aluminium framed fronts<br />
• Max. flap/door weight 20 kg<br />
• Adjustable opening and closing force<br />
• Silent System integrated –<br />
dampened opening and closing movement<br />
• Fitted with gas springs either side<br />
• Ball-bearing joint mechanism<br />
• Identical cabinet drilling pattern for Lift Top HF/HK/HL/HS<br />
• Screws pre-mounted in the housing for rational assembly<br />
• Three-dimensional front adjustment :<br />
Height ± 2 mm, side ± 2 mm, depth ± 2 mm<br />
• Inside cabinet dimensions:<br />
Height min. 342/372 mm<br />
Depth min. 280 mm<br />
Width min. 300 mm<br />
• Housing and joint mechanism in highly polished aluminium<br />
Set contains:<br />
1 each flap fitting right/left<br />
2 front adapters<br />
Fixing accessories<br />
Flap weight in kg/Order no. PU<br />
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 kg<br />
0 040 548<br />
0 040 552<br />
0 040 549<br />
0 040 553<br />
0 040 550<br />
0 040 554<br />
0 040 555<br />
0 040 551<br />
Shortenable cross member for Lift Top HL<br />
Flap fittings www.hettich.com<br />
1 set<br />
Inside cabinet width<br />
mm<br />
Order no. PU<br />
300 - 600 0 040 560 1<br />
601 - 1200 0 040 561 1<br />
1201 - 1800 0 040 562 1
Cabinet drilling pattern<br />
165<br />
min. 280<br />
Hole ø 10 x 16<br />
243<br />
120<br />
54<br />
55<br />
120 158<br />
Cabinet size Front dimensions<br />
Internal<br />
cabinet height<br />
min. 342<br />
Internal<br />
cabinet height<br />
min. 372<br />
362 + overlay<br />
412 + overlay<br />
55<br />
55<br />
189<br />
Lift travel<br />
362<br />
Lift travel<br />
412<br />
Internal<br />
cabinet height<br />
min. 342<br />
Internal<br />
cabinet height<br />
min. 372<br />
A<br />
A<br />
A = Overlay<br />
Flap lift fitting<br />
Lift Top HL<br />
Assembly<br />
ø10x16<br />
ø10x16<br />
14,5 + A<br />
14,5 + A<br />
224<br />
70<br />
254<br />
70<br />
Flap fittings 3.4.9
3.4.10<br />
Lift-up flap fitting<br />
Lift Top HS<br />
Internal cabinet height<br />
mm<br />
372 - 520<br />
521 - 580<br />
581 - 640<br />
641 - 682<br />
• For wooden fronts and wood or aluminium framed fronts<br />
• Max. flap/door weight 22 kg<br />
• Adjustable opening and closing force<br />
• Silent System integrated –<br />
dampened opening and closing movement<br />
• Fitted with gas springs either side<br />
• Ball-bearing joint mechanism<br />
• Identical cabinet drilling pattern for Lift Top HF/HK/HL/HS<br />
• Screws pre-mounted in the housing for rational assembly<br />
• Three-dimensional front adjustment :<br />
Height ± 2 mm, side ± 2 mm, depth ± 2 mm<br />
• Inside cabinet dimensions:<br />
Height 372 - 682 mm<br />
Depth min. 280 mm<br />
Width min. 300 mm<br />
• Housing and joint mechanism in highly polished aluminium<br />
Set contains:<br />
1 each flap fitting right/left<br />
2 front adapters<br />
Fixing accessories<br />
Flap weight in kg/Order no. PU<br />
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 kg<br />
0 040 556<br />
0 040 556<br />
0 040 556<br />
0 040 556<br />
0 040 557<br />
0 040 557<br />
0 040 557<br />
0 040 557<br />
0 040 558<br />
0 040 558<br />
0 040 558<br />
0 040 558<br />
0 040 559<br />
0 040 559<br />
0 040 559<br />
0 040 559<br />
Shortenable cross member for Lift Top HS<br />
Flap fittings www.hettich.com<br />
1 set<br />
Inside cabinet width<br />
mm<br />
Order no. PU<br />
300 - 600 0 040 560 1<br />
601 - 1200 0 040 561 1<br />
1201 - 1800 0 040 562 1
Cabinet drilling pattern<br />
min. 280<br />
Hole ø 10 x 16<br />
243<br />
120<br />
54<br />
55<br />
120 158<br />
Cabinet size Front dimensions<br />
296<br />
Internal<br />
cabinet height<br />
372 - 682<br />
121<br />
55<br />
448<br />
146<br />
Lift travel<br />
536<br />
Internal<br />
cabinet height<br />
372 - 682<br />
A<br />
A = Overlay<br />
Lift-up flap fitting<br />
Lift Top HS<br />
Assembly<br />
ø10x16<br />
14,5 + A<br />
232<br />
70<br />
Flap fittings 3.4.11
3.4.12<br />
Range summary/Technical comparison<br />
Flap fitting system Lift Advanced<br />
Page number<br />
Lift Advanced HF<br />
3.4.14 - 3.4.17<br />
Flap movement Folding-flap fitting<br />
Flap weight max. 15,2 kg<br />
Opening/closing force adjustable ✓<br />
Silent System integrated Dampened closing action<br />
Door/door-frame material Wood/wood, aluminium<br />
Inside cabinet dimensions<br />
Height<br />
Depth<br />
Width<br />
Front panel adjustment<br />
Height<br />
Side<br />
Depth<br />
440 - 925 mm<br />
min. 182 mm<br />
min. 300 mm<br />
±2 mm<br />
±2 mm<br />
±2 mm<br />
Material<br />
of housing/hinge mechanism Grey plastic/aluminium silver<br />
Lift Advanced HK<br />
3.4.18 - 3.4.21<br />
Flap fitting<br />
max. 20,7 kg<br />
Dampened closing action<br />
Wood/wood, aluminium<br />
min. 276 - 720 mm<br />
min. 182 mm<br />
min. 300 mm<br />
±2 mm<br />
±2 mm<br />
±2 mm<br />
Grey plastic/aluminium silver<br />
Flap fittings www.hettich.com<br />
✓<br />
i
i<br />
Lift Advanced HL<br />
3.4.22 - 3.4.25<br />
Flap lift fitting<br />
max. 18,5 kg<br />
✓<br />
Dampened closing action<br />
Wood/wood, aluminium<br />
277 - 462 mm<br />
min. 182 mm<br />
min. 300 mm<br />
±2 mm<br />
±2 mm<br />
±2 mm<br />
Grey plastic/aluminium silver<br />
Lift Advanced HS<br />
3.4.26 - 3.4.29<br />
Lift-up flap fitting<br />
max. 15,9 kg<br />
✓<br />
Dampened closing action<br />
Wood/wood, aluminium<br />
380 - 750 mm<br />
min. 182 mm<br />
min. 300 mm<br />
±2 mm<br />
±2 mm<br />
±2 mm<br />
Grey plastic/aluminium silver<br />
Range summary/Technical comparison<br />
Flap fitting system Lift Advanced<br />
Flap fittings 3.4.13
3.4.14<br />
Folding-flap fitting<br />
Lift Advanced HF<br />
• For wooden fronts and wood or aluminium framed fronts<br />
• Max. flap/door weight 15,2 kg<br />
• Adjustable opening and closing force<br />
• Centre hinge not required<br />
• Cross member not required<br />
• Different front heights possible for cabinet heights of 550 mm or more<br />
• Silent System integrated – dampened closing action<br />
• The fitting can be adapted to different front weights by means<br />
of gas pressure springs which must be ordered separately,<br />
see pages 3.4.15 - 3.4.16<br />
• Identical cabinet drilling pattern for Lift Advanced HF/HK/HL/HS<br />
• Including fixing accessories<br />
• Three-dimensional front adjustment :<br />
Height ± 2 mm, side ± 2 mm, depth ± 2 mm<br />
• Inside cabinet dimensions:<br />
Height 440 - 925 mm<br />
Depth min. 182 mm<br />
Width min. 300 mm<br />
• Housing and hinge mechanism of grey plastic/silver aluminium<br />
Set contains:<br />
1 each flap fitting right/left<br />
2 front adapters<br />
Fixing accessories<br />
Internal cabinet height<br />
mm<br />
Order no. PU<br />
440 - 550 9 079 605 1 set<br />
550 - 610 9 079 607 1 set<br />
610 - 700 9 079 610 1 set<br />
700 - 770 9 079 614 1 set<br />
770 - 925 9 079 615 1 set<br />
Adapter for aluminium frame profile<br />
• For connecting the lift-and-fold fitting Lift Advanced HF<br />
to aluminium frame profiles with a frame width of 19 mm<br />
Order no. PU<br />
9 079 601 1 set<br />
Flap fittings www.hettich.com
Folding-flap fitting<br />
Lift Advanced HF<br />
Pneumatic action<br />
• For adapting the lift-and-fold fitting Lift Advanced HF to different flap weights<br />
• Simple installation and removal<br />
Set contains:<br />
2 springs (usable left and right)<br />
Pneumatic action<br />
for folding-flap fitting Lift Advanced HF (order no. 9 079 605)<br />
440 - 550<br />
Internal cabinet height 440 - 550 mm<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
1 2 3 4 5<br />
9 079 626<br />
6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
9 079 647<br />
9 079 650<br />
9 079 651<br />
Pneumatic action<br />
for folding-flap fitting Lift Advanced HF (order no. 9 079 607)<br />
550 - 610<br />
Internal cabinet height 550 - 610 mm<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
9 079 645<br />
9 079 645<br />
9 079 647<br />
9 079 650<br />
9 079 651<br />
Flap fittings 3.4.15
3.4.16<br />
Folding-flap fitting<br />
Lift Advanced HF<br />
Pneumatic action<br />
for folding-flap fitting Lift Advanced HF (order no. 9 079 610)<br />
Internal cabinet height 610 - 700 mm<br />
610 - 700<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 626<br />
9 079 628<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 645<br />
9 079 647<br />
9 079 650<br />
Pneumatic action<br />
for folding-flap fitting Lift Advanced HF (order no. 9 079 614)<br />
Internal cabinet height 700 - 770 mm<br />
700 - 770<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 637<br />
9 079 644<br />
9 079 645<br />
9 079 647<br />
9 079 650<br />
Pneumatic action<br />
for folding-flap fitting Lift Advanced HF (order no. 9 079 615)<br />
Internal cabinet height 770 - 925 mm<br />
770 - 925<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
9 079 630<br />
9 079 635<br />
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
9 079 644<br />
9 079 645<br />
9 079 647<br />
9 079 650<br />
9 079 651<br />
Flap fittings www.hettich.com
B<br />
B1<br />
550<br />
-<br />
925<br />
B2<br />
Cabinet drilling pattern<br />
Front drilling pattern<br />
for wooden/wooden-framed fronts and aluminium frame<br />
profiles 45 mm convex and 55 mm straight/convex<br />
A<br />
A<br />
W = T+B<br />
J = U-( H-B+3 )<br />
Hole pattern<br />
for fronts of different heights<br />
min. H1 = B1+292<br />
max. H1 = B1+376<br />
118<br />
75<br />
Internal cabinet height Size<br />
mm P mm Q mm R mm S mm T mm U mm<br />
440 - 550 430 383 179 440 120 351<br />
550 - 610 468 404 163 547 154 385<br />
610 - 700 506 418 141 494 184 415<br />
700 - 770 544 439 138 522 214 445<br />
770 - 925 582 457 126 547 244 475<br />
ø10 x 17<br />
ø10 x 17<br />
H2 = Internal cabinet height - (H1-B1-3+B2)<br />
22<br />
41<br />
85<br />
ø5 x 12<br />
A+15,5<br />
A+15,5<br />
W<br />
70<br />
J<br />
70<br />
W<br />
70<br />
J<br />
70<br />
H<br />
H<br />
3<br />
H1<br />
3<br />
H2<br />
!<br />
!<br />
440<br />
-<br />
925<br />
B<br />
155<br />
R<br />
55<br />
Front drilling pattern<br />
for aluminium frame profile 19 mm<br />
A<br />
182<br />
W = T+B<br />
J = U-( H-B+3 )<br />
S<br />
Q<br />
A-6<br />
P<br />
W<br />
70<br />
3<br />
J<br />
70<br />
Folding-flap fitting<br />
Lift Advanced HF<br />
Assembly<br />
H<br />
H<br />
W/J<br />
A-6<br />
37<br />
5,2<br />
70<br />
ø8<br />
min. 11<br />
Flap fittings 3.4.17
3.4.18<br />
Flap fitting<br />
Lift Advanced HK<br />
• For wooden fronts and wood or aluminium framed fronts<br />
• Max. flap/door weight 20,7 kg<br />
• Adjustable opening and closing force<br />
• Silent System integrated – dampened closing action<br />
• The fitting can be adapted to different front weights by means<br />
of gas pressure springs which must be ordered separately,<br />
see pages 3.4.19 - 3.4.20<br />
• Identical cabinet drilling pattern for Lift Advanced HF/HK/HL/HS<br />
• Including fixing accessories<br />
• Three-dimensional front adjustment :<br />
Height: ± 2 mm, side ± 2 mm, depth ± 2 mm<br />
• Inside cabinet dimensions:<br />
Height 276 - 720 mm<br />
Depth min. 182 mm<br />
Width min. 300 mm<br />
• Housing and hinge mechanism of grey plastic/silver aluminium<br />
Set contains:<br />
1 each flap fitting right/left<br />
2 front adapters<br />
Fixing accessories<br />
Internal cabinet height<br />
mm<br />
Order no. PU<br />
276 - 720 9 079 603 1 set<br />
Adapter for aluminium frame profile<br />
• For connecting the lift-up fitting Lift Advanced HK<br />
to aluminium frame profiles with a frame width of 19 mm<br />
Order no. PU<br />
9 079 709 1 set<br />
Flap fittings www.hettich.com
Flap fitting<br />
Lift Advanced HK<br />
Pneumatic action<br />
for flap fitting Lift Advanced HK<br />
Internal cabinet height 276 - 360 mm<br />
276 - 360<br />
Flap weight in kg/Order no. PU = 1 set<br />
3<br />
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21<br />
9 079 618<br />
9 079 619<br />
9 079 622<br />
9 079 624<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
Pneumatic action<br />
for flap fitting Lift Advanced HK<br />
Internal cabinet height 360 - 480 mm<br />
360 - 480<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
1 2 3<br />
9 079 618<br />
4 5 6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 619<br />
9 079 622<br />
Pneumatic action<br />
• For adapting the lift-up fitting Lift Advanced HK<br />
to different flap weights<br />
• Simple installation and removal<br />
Set contains:<br />
2 springs (usable left and right)<br />
9 079 624<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
Flap fittings 3.4.19
3.4.20<br />
Flap fitting<br />
Lift Advanced HK<br />
Pneumatic action<br />
for flap fitting Lift Advanced HK<br />
480 - 540<br />
Internal cabinet height 480 - 540 mm<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
1 2 3 4<br />
9 079 618<br />
5 6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 619<br />
9 079 622<br />
9 079 624<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
Pneumatic action<br />
for flap fitting Lift Advanced HK<br />
540 - 600<br />
Internal cabinet height 540 - 600 mm<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 618<br />
9 079 624<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
Pneumatic action<br />
for flap fitting Lift Advanced HK<br />
Internal cabinet height 600 - 720 mm<br />
600 - 720<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
9 079 619<br />
9 079 622<br />
1 2<br />
9 079 619<br />
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 622<br />
9 079 624<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
Flap fittings www.hettich.com
B<br />
Cabinet drilling pattern<br />
Front drilling pattern<br />
for wooden/wooden-framed fronts and aluminium frame<br />
profiles 45 mm convex and 55 mm straight/convex<br />
A<br />
118<br />
75<br />
ø10 x 17<br />
22<br />
41<br />
85<br />
ø5 x 12<br />
A+15,5<br />
B+158<br />
32<br />
!<br />
276<br />
-<br />
720<br />
B<br />
Front drilling pattern<br />
for aluminium frame profile 19 mm<br />
A<br />
270<br />
155<br />
182<br />
118<br />
75<br />
22<br />
55<br />
41<br />
85<br />
A-6<br />
B+162<br />
24<br />
Flap fitting<br />
Lift Advanced HK<br />
Assembly<br />
B+162<br />
A-6<br />
37<br />
5,2<br />
24<br />
ø8<br />
min. 11<br />
Flap fittings 3.4.21
3.4.22<br />
Flap lift fitting<br />
Lift Advanced HL<br />
• For wooden fronts and wood or aluminium framed fronts<br />
• Max. flap/door weight 18,5 kg<br />
• Adjustable opening and closing force<br />
• Silent System integrated – dampened closing action<br />
• The fitting can be adapted to different front weights by means<br />
of gas pressure springs which must be ordered separately,<br />
see pages 3.4.23 - 3.4.24<br />
• Identical cabinet drilling pattern for Lift Advanced HF/HK/HL/HS<br />
• Including fixing accessories<br />
• Three-dimensional front adjustment :<br />
Height ± 2 mm, side ± 2 mm, depth ± 2 mm<br />
• Inside cabinet dimensions:<br />
Height 277 - 462 mm<br />
Depth min. 182 mm<br />
Width min. 300 mm<br />
• Housing and hinge mechanism of grey plastic / silver aluminium<br />
Set contains:<br />
1 each flap fitting right/left<br />
2 front adapters<br />
Fixing accessories<br />
Internal cabinet height<br />
mm<br />
Order no. PU<br />
277 - 312 9 079 595 1 set<br />
312 - 342 9 079 597 1 set<br />
342 - 372 9 079 598 1 set<br />
372 - 402 9 079 599 1 set<br />
402 - 462 9 079 600 1 set<br />
Shortenable cross member<br />
for flap lift fitting Lift Advanced HL<br />
For cabinet width<br />
mm<br />
Order no. PU<br />
600 9 079 653 1 set<br />
1200 9 079 658 1 set<br />
1800 9 079 664 1 set<br />
Adapter for aluminium frame profile<br />
• For connecting the high-rise fitting Lift Advanced HL<br />
to aluminium frame profiles with a frame width of 19 mm<br />
Order no. PU<br />
9 079 601 1 set<br />
Flap fittings www.hettich.com
Flap lift fitting<br />
Lift Advanced HL<br />
Pneumatic action<br />
for flap lift fitting Lift Advanced HL (Order no. 9 079 595)<br />
Internal cabinet height 277 - 312 mm<br />
277 - 312<br />
Flap weight in kg/Order no. PU = 1 set<br />
1<br />
2 3<br />
9 079 618<br />
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18<br />
9 079 619<br />
9 079 622<br />
9 079 624<br />
9 079 626<br />
9 079 628<br />
Pneumatic action<br />
for flap lift fitting Lift Advanced HL (Order no. 9 079 597)<br />
Internal cabinet height 312 - 342 mm<br />
2<br />
312 - 3422<br />
Flap weight in kg/Order no. PU = 1 set<br />
1<br />
2 3<br />
9 079 618<br />
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18<br />
9 079 619<br />
9 079 622<br />
9 079 624<br />
Pneumatic action<br />
• For adapting the high-rise fitting Lift Advanced HL<br />
to different flap weights<br />
• Simple installation and removal<br />
Set contains:<br />
2 springs (usable left and right)<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
Flap fittings 3.4.23
3.4.24<br />
Flap lift fitting<br />
Lift Advanced HL<br />
Pneumatic action<br />
for flap lift fitting Lift Advanced HL (Order no. 9 079 598)<br />
Internal cabinet height 342 - 372 mm<br />
342 - 372<br />
Flap weight in kg/Order no. PU = 1 set<br />
1<br />
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18<br />
9 079 618<br />
9 079 619<br />
9 079 622<br />
9 079 624<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
Pneumatic action<br />
for flap lift fitting Lift Advanced HL (Order no. 9 079 599)<br />
Internal cabinet height 372 - 402 mm<br />
372 - 402<br />
Flap weight in kg/Order no. PU = 1 set<br />
1<br />
2 3<br />
9 079 618<br />
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18<br />
9 079 622<br />
9 079 624<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
Pneumatic action<br />
for flap lift fitting Lift Advanced HL (Order no. 9 079 600)<br />
Internal cabinet height 402 - 462 mm<br />
402 - 462<br />
Flap weight in kg/Order no. PU = 1 set<br />
1<br />
9 079 619<br />
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18<br />
9 079 618<br />
9 079 619<br />
9 079 622<br />
9 079 624<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
Flap fittings www.hettich.com
B<br />
Cabinet drilling pattern<br />
A<br />
Internal cabinet height Size<br />
mm P mm Q mm T mm<br />
277 - 312 49 126 160<br />
312 - 342 33 155 195<br />
342 - 372 15 179 225<br />
372 - 402 17 203 255<br />
402 - 462 9 227 285<br />
Front drilling pattern<br />
for wooden/wooden-framed fronts and aluminium frame<br />
profiles 45 mm convex and 55 mm straight/convex<br />
118<br />
75<br />
ø10 x 17<br />
22<br />
41<br />
A+14,5<br />
85<br />
ø5 x 12<br />
B+T<br />
70<br />
!<br />
277<br />
-<br />
462<br />
B<br />
155<br />
Front drilling pattern<br />
for aluminium frame profile 19 mm<br />
A<br />
182<br />
118<br />
75<br />
22<br />
55<br />
Q<br />
41<br />
P<br />
85<br />
A-7<br />
B+T<br />
70<br />
Flap lift fitting<br />
Lift Advanced HL<br />
Assembly<br />
37<br />
B+T<br />
A-7<br />
5,2<br />
70<br />
ø8<br />
min. 11<br />
Flap fittings 3.4.25
3.4.26<br />
Lift-up flap fitting<br />
Lift Advanced HS<br />
• For wooden fronts and wood or aluminium framed fronts<br />
• Max. flap/door weight 15,9 kg<br />
• Adjustable opening and closing force<br />
• Silent System integrated – dampened closing action<br />
• The fitting can be adapted to different front weights by means<br />
of gas pressure springs which must be ordered separately,<br />
see pages 3.4.27 - 3.4.28<br />
• Identical cabinet drilling pattern for Lift Advanced HF/HK/HL/HS<br />
• Including fixing accessories<br />
• Three-dimensional front adjustment :<br />
Height ± 2 mm, side ± 2 mm, depth ± 2 mm<br />
• Inside cabinet dimensions:<br />
Height 380 - 750 mm<br />
Depth min. 182 mm<br />
Width min. 300 mm<br />
• Housing and hinge mechanism of grey plastic/silver aluminium<br />
Set contains:<br />
1 each flap fitting right/left<br />
2 front adapters<br />
Fixing accessories<br />
Internal cabinet height<br />
mm<br />
Order no. PU<br />
380 - 750 9 079 617 1 set<br />
Shortenable cross member<br />
for Lift-up flap fitting Lift Advanced HS<br />
For cabinet width<br />
mm<br />
Order no. PU<br />
600 9 079 653 1 set<br />
1200 9 079 658 1 set<br />
1800 9 079 664 1 set<br />
Adapter for aluminium frame profile<br />
• For connecting the high-swing fitting Lift Advanced HS<br />
to aluminium frame profiles with a frame width of 19 mm<br />
Order no. PU<br />
9 079 601 1 set<br />
Flap fittings www.hettich.com
Lift-up flap fitting<br />
Lift Advanced HS<br />
Pneumatic action<br />
380 - 500<br />
for Lift-up flap fitting Lift Advanced HS<br />
Internal cabinet height 380 - 500 mm<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 618<br />
9 079 619<br />
9 079 622<br />
9 079 624<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
9 079 645<br />
Pneumatic action<br />
for Lift-up flap fitting Lift Advanced HS<br />
Internal cabinet height 500 - 580 mm<br />
500 - 580<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 618<br />
9 079 619<br />
9 079 622<br />
9 079 624<br />
9 079 626<br />
Pneumatic action<br />
• For adapting the high-swing fitting Lift Advanced HS<br />
to different flap weights<br />
• Simple installation and removal<br />
Set contains:<br />
2 springs (usable left and right)<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
9 079 645<br />
Flap fittings 3.4.27
3.4.28<br />
Lift-up flap fitting<br />
Lift Advanced HS<br />
Pneumatic action<br />
580 - 680<br />
for Lift-up flap fitting Lift Advanced HS<br />
Internal cabinet height 580 - 680 mm<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
1 2 3<br />
9 079 618<br />
4 5 6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 619<br />
9 079 622<br />
9 079 624<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
9 079 645<br />
Pneumatic action<br />
680 - 750<br />
for Lift-up flap fitting Lift Advanced HS<br />
Internal cabinet height 680 - 750 mm<br />
Flap weight in kg/Order no. PU = 1 set<br />
0<br />
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17<br />
9 079 619<br />
9 079 622<br />
9 079 624<br />
9 079 626<br />
9 079 628<br />
9 079 630<br />
9 079 632<br />
9 079 635<br />
9 079 637<br />
9 079 644<br />
9 079 645<br />
Flap fittings www.hettich.com
B<br />
A<br />
Internal cabinet height Size<br />
mm P mm Q mm<br />
380 - 500 435 260<br />
500 - 580 476 334<br />
580 - 680 498 381<br />
680 - 750 545 446<br />
Front drilling pattern<br />
for wooden/wooden-framed fronts and aluminium frame<br />
profiles 45 mm convex and 55 mm straight/convex<br />
118<br />
75<br />
ø10 x 17<br />
22<br />
41<br />
A+14,5<br />
85<br />
ø5 x 12<br />
B+233<br />
70<br />
!<br />
!<br />
310<br />
380<br />
-<br />
750<br />
B<br />
155<br />
Front drilling pattern<br />
for aluminium frame profile 19 mm<br />
A<br />
182<br />
81<br />
55<br />
Q<br />
P<br />
A-7<br />
70<br />
Lift-up flap fitting<br />
Lift Advanced HS<br />
Assembly<br />
B+233<br />
37<br />
B+233<br />
A-7<br />
5,2<br />
70<br />
ø8<br />
min. 11<br />
Flap fittings 3.4.29
3.4.30<br />
Vertical lift-up flap fitting<br />
with pneumatic action<br />
• Ideal for microwave ovens, grills, electrical appliances, etc.<br />
• Max. flap/door weight 4,6 kg<br />
• Fitted with gas springs on one side<br />
• Inside cabinet dimensions:<br />
Width 561/563/567 mm<br />
Height 330 - 450 mm<br />
Depth min. 215 mm<br />
• Two-dimensional front adjustment<br />
Height ± 3 mm, side ± 3 mm<br />
• Steel, white plastic coated or aluminium finish<br />
For cabinet side Inside cabinet width Order no. PU<br />
mm mm white aluminium finish<br />
16 567 0 079 392 0 045 027 1<br />
18 563 0 079 393 0 045 028 1<br />
19 561 0 079 394 0 045 029 1<br />
10<br />
160<br />
64<br />
64<br />
32<br />
10<br />
32<br />
62 40<br />
226<br />
32<br />
239 for 13 mm<br />
overlay<br />
Flap fittings www.hettich.com<br />
10<br />
32 ø6<br />
±3<br />
±3<br />
160<br />
64<br />
64<br />
Inside cabinet width -52<br />
32 10
Assembly<br />
Cabinet assembly<br />
�<br />
�<br />
Front panel<br />
assembly<br />
Inside cabinet width<br />
561/563/567<br />
Utilizable space<br />
Inside height - 33 mm<br />
Inside width - 46,5 mm<br />
Inside depth - 30 mm<br />
Front panel assembly Front panel adjustment<br />
±3<br />
Vertical lift-up flap fitting<br />
with pneumatic action<br />
Inside<br />
cabinet depth<br />
min. 215<br />
±3<br />
Inside<br />
cabinet height<br />
min. 330<br />
max. 450<br />
Flap fittings 3.4.31
3.4.32<br />
Vertical lift-up flap fitting<br />
with pneumatic action<br />
and adjustable width<br />
• Ideal for microwave ovens, grills, electrical appliances, etc.<br />
• Max. flap/door weight 4,0/5,0 kg<br />
• Fitted with gas springs either side<br />
• Inside cabinet dimensions:<br />
Width 411 - 580 mm / 560 - 870 mm<br />
Height min. 330 - 450 mm<br />
Depth min. 215 mm<br />
• Two-dimensional front adjustment<br />
Height ± 3 mm, side ± 3 mm<br />
• Steel, white plastic coated or aluminium finish<br />
Inside cabinet width Max. flap weight Order no. PU<br />
mm kg white aluminium finish<br />
411 - 580 4,0 0 045 159 0 045 031 1<br />
560 - 870 5,0 0 045 160 0 045 032 1<br />
10<br />
160<br />
64<br />
64<br />
32 10<br />
32<br />
62 40<br />
226<br />
32<br />
226 + X<br />
x = Door overlay<br />
32 ø6<br />
Inside cabinet width - 52<br />
Flap fittings www.hettich.com<br />
±3<br />
±3
Assembly<br />
Cabinet assembly<br />
�<br />
�<br />
Front panel<br />
assembly<br />
Front panel assembly Front panel adjustment<br />
Vertical lift-up flap fitting<br />
with pneumatic action<br />
and adjustable width<br />
Inside Lichte cabinet Korpustiefe depth<br />
min. 215/*280<br />
215/*280 Inside Lichte<br />
cabinet Korpushöhe height<br />
min. > 330 330 < 450<br />
max. 450<br />
Inside Lichte cabinet Korpusbreite width<br />
411-870 567/867<br />
±3<br />
Utilizable space<br />
Inside height - 35 mm<br />
Inside width - 55 mm<br />
Inside depth - 30 mm<br />
*when using cabinet<br />
suspension brackets<br />
Side // ±3Page<br />
±<br />
Flap fittings 3.4.33
10<br />
3.4.34<br />
Vertical lift-up flap fitting<br />
width adjustable<br />
with 2 gas pressure springs<br />
min. 220<br />
128<br />
64<br />
78<br />
60<br />
14<br />
60 60<br />
min. 320<br />
• Ideal for microwave ovens, grills, electrical appliances, etc.<br />
• Max. flap/door weight 5,0/7,0/8,5 kg<br />
• Adjustable to clear cabinet widths of 450 - 870/1170/1470 mm<br />
• Fitted with gas springs either side<br />
• Inside cabinet dimensions:<br />
Width 450 – 870/1170/1470 mm<br />
Height min. 320 mm<br />
Depth min. 220 mm<br />
• Three-dimensional front adjustment :<br />
Height ± 3 mm, side ± 1,5 mm, tilt adjustment - 0,5°/+ 1°<br />
• Steel, white plastic coated or aluminium finish<br />
Inside cabinet width Max. flap weight Order no. PU<br />
mm kg white aluminium finish<br />
450 - 870 5,0 0 013 886 0 045 033 1<br />
450 - 1170 7,0 0 013 887 0 045 034 1<br />
450 - 1470 8,5 0 013 888 0 045 035 1<br />
!<br />
210 for 13 mm<br />
overlay<br />
64<br />
32<br />
Flap fittings www.hettich.com<br />
10<br />
ø4,5<br />
128<br />
Inside cabinet width -31<br />
±3<br />
+1°<br />
- 0,5°<br />
±1,5<br />
78<br />
14<br />
10<br />
64
Assembly<br />
Cabinet assembly<br />
Front panel<br />
assembly<br />
90°<br />
Inside cabinet width - 17<br />
Front panel assembly Front panel adjustment<br />
±3<br />
Inside<br />
cabinet width<br />
max. 870<br />
1170<br />
1470<br />
Utilizable space<br />
Inside height - 60 mm<br />
Inside width - 72 mm<br />
Vertical lift-up flap fitting<br />
width adjustable<br />
with 2 gas pressure springs<br />
Inside<br />
cabinet depth<br />
min. 220<br />
-0,5°<br />
+1°<br />
Inside<br />
cabinet height<br />
320<br />
±1,5<br />
Flap fittings 3.4.35
3.4.36<br />
Top box hinge<br />
Lift Up<br />
Mounting example<br />
26<br />
428<br />
361<br />
Insertion depth<br />
339<br />
7,5<br />
max. insertion depth = 346 mm<br />
min. insertion depth = 130 mm<br />
32<br />
317<br />
382<br />
40<br />
7,5<br />
R3,75<br />
12<br />
116<br />
2<br />
8<br />
1<br />
• Ideal for microwave ovens, electrical appliances or files<br />
• The inset flap is simple to install, saves space,<br />
is easy to operate and disappears almost completely in the cabinet<br />
• Suitable for 4 different flap thicknesses<br />
15, 16, 18 and 19 mm<br />
• Max. flap width 1200 mm<br />
• Max. flap weight 8 kg<br />
• Flap heights 145 - 400 mm<br />
• Height adjustment ± 1,25 mm<br />
• Grey plastic<br />
Set contains:<br />
2 guide profiles<br />
2 adjusting adapters<br />
2 end caps<br />
2 hinges<br />
4 pins<br />
For flap thickness<br />
mm<br />
Order no. PU<br />
15/16 0 045 025 1 set<br />
18/19 0 045 026 1 set<br />
8 11<br />
Flap fittings www.hettich.com<br />
3<br />
ø26<br />
3<br />
115 33 15<br />
12,2<br />
126<br />
23<br />
80<br />
80<br />
15/16 18/19<br />
8 11<br />
5,5 2,5
Mounting example<br />
• Lift Junior 90: spring force 90 N<br />
Max. flap weight 2 kg<br />
• Lift Junior 140: spring force 140 N<br />
Max. flap weight 2,5 kg<br />
• Efficient hole line assembly<br />
• Nickel-plated steel<br />
Flap fittings Lift Junior 90/140<br />
Opening angle 75°<br />
Article Order no. PU<br />
Lift Junior 90 0 079 397 1/10 sets<br />
Lift Junior 140 0 040 722 1/10 sets<br />
16<br />
41<br />
32<br />
32<br />
28<br />
49<br />
The closed flap is flush with the<br />
top panel for the dimensions<br />
given in the diagram.<br />
Diagrams valid for 90 N/140 N<br />
versions<br />
32<br />
75°<br />
26,5<br />
Flap fittings 3.4.37
3.4.38<br />
Top box hinge Lift exact<br />
Opening angle 75°<br />
Mounting example<br />
24<br />
64<br />
32<br />
16<br />
Guide values for flap sizes<br />
Flap thickness: 19 mm<br />
Flap material: chipboard<br />
Chipboard density: 0,7 kg/dm3 37<br />
50<br />
• The spring can be adjusted up to 220 N<br />
to balance the flap weight<br />
• Max. flap weight: 4,6 kg<br />
• Efficient hole line assembly<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 040 721 1/10 sets<br />
64<br />
75°<br />
Height<br />
200<br />
250<br />
300<br />
350<br />
400<br />
450<br />
500<br />
The closed flap is flush with the<br />
top panel for the dimensions<br />
given in the diagram.<br />
Trial mounting is advisable if necessary!<br />
26,5<br />
300 400 450 500 600 700 800 900 1000<br />
Flap fittings www.hettich.com<br />
Width
Mounting example<br />
Guide values for flap sizes<br />
Flap thickness: 19 mm<br />
Flap material: chipboard<br />
Chipboard density: 0,7 kg/dm 3<br />
� only with infinitely variable spring force adjustment from<br />
80 to 220 N on Lift 90<br />
16 50<br />
23<br />
64<br />
32<br />
17,5<br />
37<br />
44<br />
64<br />
• Lift 90: spring force 180 N<br />
Max. flap weight 3,3 kg<br />
• Lift 90: spring force 80 - 220 N<br />
Max. flap weight 4,6 kg<br />
• Efficient hole line assembly<br />
• Nickel-plated steel<br />
90°<br />
Height<br />
200<br />
250<br />
300<br />
350<br />
400<br />
450<br />
500<br />
The closed flap is flush with the<br />
top panel for the dimensions<br />
given in the diagram.<br />
Width<br />
Trial mounting is advisable if necessary!<br />
26,5<br />
Top box hinge Lift 90<br />
Opening angle 90°<br />
Spring force<br />
N<br />
Order no. PU<br />
180 0 079 389 1/10 sets<br />
80 - 220 0 010 921 1/10 sets<br />
300 400 450 500 600 700 800 900 1000<br />
�<br />
�<br />
�<br />
� �<br />
Flap fittings 3.4.39
3.4.40<br />
Top box hinge Lift 90 Alu<br />
Opening angle 90°<br />
Mounting example<br />
16<br />
41<br />
96<br />
32<br />
min. 16<br />
17,5<br />
The closed flap is flush with the<br />
top panel for the dimensions<br />
given in the diagram.<br />
ø6,5<br />
28<br />
44<br />
37<br />
64<br />
6,5<br />
6<br />
• Suitable for 19 mm aluminium frame profiles<br />
• The spring force is infinitely adjustable from 80 N to 220 N<br />
• Max. flap weight: 4,6 kg<br />
• Efficient hole line assembly<br />
• Zinc-plated steel<br />
Order no. PU<br />
0 079 390 1/10 sets<br />
4<br />
19,5<br />
6,5<br />
90°<br />
19<br />
Aluminium frame profile<br />
Flap fittings www.hettich.com<br />
90°
Mounting example<br />
Intermat 9943<br />
44<br />
M<br />
• With screw-on housing and base<br />
• Max. flap weight 6 kg<br />
• The flap is held open by a catch.<br />
Lifting the flap slightly releases<br />
the catch. An indent in the the<br />
tie bar keeps the lid shut.<br />
• Support bar, support and base:<br />
nickel-plated steel<br />
• Housing: white plastic<br />
Order no. PU<br />
0 013 239 1/10<br />
37 14<br />
192,5<br />
Assembly note:<br />
The ridge M must always be<br />
in front at the bottom.<br />
Top box stay KLS 10/200<br />
Flap fittings 3.4.41
3.4.42<br />
Top box stay KLS 30/250<br />
Mounting example<br />
Intermat 9943<br />
X=232-A<br />
32<br />
A<br />
37<br />
67<br />
32<br />
Assembly note:<br />
Increasing size X<br />
slightly<br />
decreases the<br />
opening angle.<br />
• With screw-on support and base<br />
• The flap weight is balanced by a spring<br />
and the flap is held securely closed<br />
• Adjustable spring force<br />
• Nickel-plated steel<br />
Order no. PU<br />
0 016 179 1/10<br />
Quantity of KLS 30<br />
to be used on different flap sizes<br />
Height Width Material thickness<br />
mm mm 16 mm* 19 mm*<br />
260 450 1<br />
260 500 1<br />
260 600 1<br />
300 450 1 1<br />
300 500 1 1<br />
300 600 1 1<br />
400 450 1 1<br />
400 500 1 1<br />
400 600 1 2<br />
500 450 2 2<br />
500 500 2 2<br />
500 600 2 2<br />
* based on chipboard<br />
Flap fittings www.hettich.com
Mounting example<br />
Intermat 9943<br />
235 - 240<br />
32<br />
• With screw-on support and base<br />
• Max. flap weight 3,2 kg<br />
• Max. flap size:<br />
Height 400 mm<br />
Width 600 mm<br />
• Right-hand or left-hand useable<br />
Order no. PU<br />
9 079 593 1/10<br />
30<br />
59 - 69<br />
32<br />
Number of Lift Basic flap<br />
supports to be used<br />
Height Width Quantity/<br />
mm mm number of*<br />
max. 300 max. 400 1<br />
max. 400 max. 600 2<br />
*based on 19 mm chipboard<br />
Top box stay Lift Basic<br />
Flap fittings 3.4.43
3.4.44<br />
Top box stay<br />
Mounting example<br />
B<br />
25<br />
Intermat 9943<br />
C<br />
• With screw-on support and base<br />
• The flap is held open by a catch.<br />
Lifting the flap slightly releases the catch.<br />
• Nickel-plated steel<br />
Size L<br />
mm<br />
Order no. PU<br />
167 0 072 996 1/10<br />
252 0 072 997 1/10<br />
L<br />
A<br />
Dimensions in mm<br />
L A B C<br />
167 116 100 37<br />
252 166 150 80<br />
Flap fittings www.hettich.com<br />
10
Mounting example<br />
Intermat 9943<br />
125<br />
• With support head for 8 mm drill diameter<br />
• Max. flap weight 6 kg<br />
• Support bar and base: nickel-plated steel<br />
• Support head: white plastic<br />
25<br />
102<br />
193<br />
ø8<br />
10,5<br />
Assembly note:<br />
Dimensions apply to<br />
90° opening angle<br />
14<br />
Top box stay KLS 40<br />
Article Order no. PU<br />
KLS 40 right 0 025 086 1/10<br />
KLS 40 left 0 025 085 1/10<br />
Flap fittings 3.4.45
3.4.46<br />
Flap stays<br />
Aquila<br />
• For wooden fronts and wood or aluminium framed fronts<br />
• Max. flap/door weight 12 kg<br />
• Adjustable opening and closing force<br />
• Assembly: Either recessed in the cabinet wall<br />
or optionally as screw-on version<br />
• Including fixing accessories<br />
• Front panel adjustment: Adjustable opening angle<br />
• Cabinet size:<br />
Height 200 - 480 mm<br />
Minimum installation depth 290 mm<br />
• Housing of bright polished aluminium<br />
Set contains:<br />
Flap stay right/left<br />
Front connection for wood/wood frame fronts<br />
Fixing accessories<br />
Cabinet height mm Order no. PU<br />
200 - 480 9 079 722 1 set<br />
200 - 480 9 079 724 1 set<br />
200/230 - 480 9 079 725 1 set<br />
270 - 480 9 079 727 1 set<br />
270 - 480 9 079 728 1 set<br />
Permissible flap weights for connection with Markant 11 see page 3.4.47<br />
Permissible flap weights for connection with Intermat 9943 see page 3.4.48<br />
Set of accessories for attachment<br />
to 19 mm wide aluminium frame profile<br />
Set contains:<br />
4 front adapters<br />
Order no. PU<br />
9 079 730 1 set<br />
Set of accessories for screw-on mounting<br />
Set contains:<br />
4 housing adapters<br />
2 front adapters<br />
Order no. PU<br />
9 079 721 1 set<br />
Flap fittings www.hettich.com
Flap connection with<br />
flap hinge Markant 11<br />
Flap stays<br />
Aquila<br />
Cabinet height mm Flap weight in kg/Order no. PU = 1 set<br />
200 - 230<br />
230 - 270<br />
270 - 330<br />
330 - 380<br />
380 - 430<br />
430 - 460<br />
460 - 480<br />
0<br />
1 2 3 4 5 6 7 8 9 10 11 12 13<br />
9 079 725<br />
9 079 722<br />
9 079 722<br />
9 079 722<br />
9 079 724<br />
9 079 722<br />
9 079 724<br />
9 079 724<br />
9 079 722<br />
9 079 724<br />
9 079 722<br />
9 079 724<br />
9 079 722<br />
9 079 724<br />
9 079 725<br />
9 079 725<br />
9 079 725<br />
9 079 725<br />
9 079 724<br />
9 079 727<br />
9 079 727<br />
9 079 727<br />
9 079 725<br />
9 079 727<br />
9 079 728<br />
9 079 728<br />
9 079 725<br />
9 079 728<br />
9 079 728<br />
9 079 727<br />
9 079 728<br />
Flap fittings 3.4.47
3.4.48<br />
Flap stays<br />
Aquila<br />
Flap connection with<br />
fast-assembly concealed hinges Intermat 9943<br />
Cabinet height mm Flap weight in kg/Order no. PU = 1 set<br />
200 - 230<br />
230 - 270<br />
270 - 330<br />
330 - 380<br />
380 - 430<br />
430 - 460<br />
460 - 480<br />
0<br />
1 2 3 4 5 6 7 8 9 10 11 12 13<br />
9 079 724<br />
9 079 722<br />
9 079 722<br />
9 079 722<br />
9 079 722<br />
9 079 724<br />
9 079 724<br />
9 079 722<br />
9 079 724<br />
9 079 722<br />
9 079 724<br />
9 079 724<br />
9 079 724<br />
9 079 722<br />
9 079 725<br />
9 079 725<br />
9 079 725<br />
9 079 725<br />
9 079 727<br />
9 079 727<br />
9 079 727<br />
9 079 725<br />
9 079 728<br />
9 079 727<br />
9 079 728<br />
9 079 727<br />
9 079 725<br />
9 079 728<br />
9 079 728<br />
9 079 728<br />
Flap fittings www.hettich.com
Mounting by milling 9 Screw-on mounting<br />
(accessory set, order no. 9 079 721,<br />
must be ordered separately)<br />
9<br />
Cabinet drilling pattern Cabinet drilling pattern<br />
42<br />
20<br />
9<br />
R 5<br />
38<br />
9<br />
255<br />
257<br />
Front drilling pattern<br />
for wooden/wooden-framed fronts as well as aluminium frame<br />
profiles 45 mm convex and 55 mm straight/convex<br />
13<br />
Inside e<br />
cabinet<br />
height<br />
23<br />
35<br />
45<br />
ø5<br />
3<br />
10<br />
ø 5 x 13<br />
Cabinet height X<br />
200 - 330 101<br />
330 - 430 127<br />
430 - 480 145<br />
Front drilling pattern for 19 mm aluminium frame profile<br />
(accessory set, order no. 9 079 730, must be ordered separately)<br />
Inside he<br />
cabinet<br />
height<br />
min. 290<br />
ø8 x 12<br />
min. 7<br />
25<br />
Y<br />
35<br />
X<br />
A<br />
B<br />
12 + B<br />
20<br />
X<br />
B<br />
B - 7<br />
min. 145<br />
4x<br />
M4x12<br />
ø5 x 13<br />
10<br />
35<br />
45<br />
4x<br />
M4x10<br />
Cabinet height X<br />
200 - 330 101<br />
330 - 430 127<br />
430 - 480 145<br />
A<br />
Cabinet height Y<br />
200 - 330 122<br />
330 - 430 148<br />
430 - 480 158<br />
�<br />
�<br />
�<br />
5,2<br />
42<br />
20<br />
9<br />
Flap stays<br />
Aquila<br />
Assembly<br />
Front drilling pattern<br />
for wooden/wooden-framed fronts as well as aluminium frame<br />
profiles 45 mm convex and 55 mm straight/convex<br />
Inside he<br />
cabinet<br />
height<br />
ø 5 x 12<br />
Cabinet height X<br />
200 - 330 104<br />
330 - 430 130<br />
430 - 480 148<br />
Front drilling pattern for 19 mm aluminium frame profile<br />
(accessory sets, order no. 9 079 730 and 9 079 721,<br />
should be ordered separately)<br />
ushöhe Inside<br />
cabinet<br />
height<br />
min. 290<br />
238 35<br />
257<br />
ø10<br />
ø8 x 12<br />
min. 7<br />
Y<br />
28<br />
X<br />
A<br />
B<br />
21 + B<br />
20<br />
X<br />
A<br />
B<br />
B + 2<br />
ø10<br />
min. 145<br />
Cabinet height Y<br />
200 - 330 122<br />
330 - 430 148<br />
430 - 480 158<br />
Cabinet height X<br />
200 - 330 108<br />
330 - 430 134<br />
430 - 480 148<br />
�<br />
�<br />
�<br />
5,2<br />
Flap fittings 3.4.49
Y<br />
X<br />
3.4.50<br />
Flap stay Klassik D<br />
with magnetic catch<br />
Assembly notes<br />
42,5<br />
40,5<br />
10,5<br />
20<br />
Markant<br />
ø8<br />
18,5<br />
ø5<br />
37<br />
Size Y can be made slightly<br />
bigger or smaller, size A then<br />
changes correspondingly.<br />
L<br />
30-45°<br />
A<br />
• High-quality, maintenance-free<br />
braking system with fine adjustment<br />
• Adjustable 4 mm magnetic catch<br />
• Guide bar, tie bar and base: nickel-plated steel<br />
• Housing and support: nickel-plated zinc die-cast<br />
Important: the angle between<br />
the tie bar and the open flap<br />
must be 30-45°!<br />
The brake housing must rest on<br />
the lower support when the flap<br />
is open.<br />
Article Cabinet Order no. PU<br />
internal height mm right left<br />
Klassik D/275 290 - 340 0 021 698 0 021 575 1/10<br />
Klassik D/340 340 - 400 0 021 699 0 021 577 1/10<br />
Klassik D/405 405 - 465 0 021 700 0 021 579 1/10<br />
Klassik D/465 465 - 560 0 021 701 0 021 581 1/10<br />
Klassik D/565 565 - 625 0 021 702 0 021 583 1/10<br />
Brake force<br />
adjustment<br />
14<br />
MA 37 D magnetic support<br />
Base<br />
Fasten with wood screws ø3,5 DIN 95/DIN 97<br />
and ø 5 mm expanding dowels<br />
Flap fittings www.hettich.com<br />
12<br />
10<br />
6,5 8,5<br />
2<br />
14<br />
30<br />
32<br />
8,5<br />
15<br />
16<br />
2<br />
33-37<br />
32 45<br />
ø14<br />
1,4<br />
!<br />
Article Cabinet Dimensions mm<br />
internal height mm X Y A L<br />
Klassik D/275 290 - 340 252 24 70 113<br />
Klassik D/340 340 - 400 288 56 95 153<br />
Klassik D/405 405 - 465 320 56 133 183<br />
Klassik D/465 465 - 560 352 88 159 223<br />
Klassik D/565 565 - 625 416 120 198 273
Assembly notes<br />
Y<br />
X<br />
42,5<br />
40,5<br />
20<br />
Markant<br />
ø8<br />
18,5<br />
ø5<br />
37<br />
Size Y can be made slightly<br />
bigger or smaller, size A then<br />
changes correspondingly.<br />
L<br />
30-45°<br />
A<br />
• High-quality, maintenance-free<br />
braking system with fine adjustment<br />
• Guide bar, tie bar and base: nickel-plated steel<br />
• Housing and support: nickel-plated zinc die-cast<br />
Important: the angle between<br />
the tie bar and the open flap<br />
must be 30-45°!<br />
The brake housing must rest on<br />
the lower support when the flap<br />
is open.<br />
Order numbers refer to left-hand versions.<br />
Use left or right by repositioning the base.<br />
14<br />
Flap stay Klassik D<br />
with LS 3280 D support<br />
Article Cabinet Order no. PU<br />
internal height mm right<br />
Klassik D/275 290 - 340 0 020 864 1/10<br />
Klassik D/340 340 - 400 0 020 865 1/10<br />
Klassik D/405 405 - 465 0 020 866 1/10<br />
Klassik D/465 465 - 560 0 020 867 1/10<br />
Klassik D/565 565 - 625 0 020 868 1/10<br />
Brake force<br />
adjustment<br />
LS 3280 D support<br />
Base<br />
15 7,8 16<br />
2<br />
8,5<br />
6<br />
14<br />
Fasten with wood screws ø3,5 DIN 95/DIN 97<br />
and ø 5 mm expanding dowels<br />
Article Cabinet Dimensions mm<br />
internal height mm X Y A L<br />
Klassik D/275 290 - 340 252 24 70 113<br />
Klassik D/340 340 - 400 288 56 95 153<br />
Klassik D/405 405 - 465 320 56 133 183<br />
Klassik D/465 465 - 560 352 88 159 223<br />
Klassik D/565 565 - 625 416 120 198 273<br />
8,5<br />
32<br />
15<br />
2<br />
32 45<br />
12<br />
Flap fittings 3.4.51
3.4.52<br />
Flap stay Klassik D<br />
with L 258 D support<br />
Y<br />
X<br />
42,5<br />
11<br />
20<br />
ø8<br />
18,5<br />
28<br />
Size Y can be made slightly<br />
bigger or smaller, size A then<br />
changes correspondingly.<br />
L<br />
30-45°<br />
A<br />
• High-quality, maintenance-free<br />
braking system with fine adjustment<br />
• Guide bar, tie bar and base: nickel-plated steel<br />
• Housing and support: nickel-plated zinc die-cast<br />
Order numbers refer to left-hand versions.<br />
Use left or right by repositioning the base.<br />
Assembly notes L 258 D support<br />
Markant<br />
Important: the angle between<br />
the tie bar and the open flap<br />
must be 30 - 45°!<br />
The brake housing must rest on<br />
the lower support when the flap<br />
is open.<br />
Article Cabinet<br />
internal height mm<br />
Order no. PU<br />
Klassik D/300 300 - 350 0 016 173 1/10<br />
Klassik D/350 350 - 400 0 016 174 1/10<br />
Klassik D/400 400 - 450 0 016 175 1/10<br />
Klassik D/450 450 - 500 0 016 176 1/10<br />
Klassik D/500 500 - 550 0 016 177 1/10<br />
Klassik D/550 550 - 600 0 016 178 1/10<br />
Brake force<br />
adjustment<br />
14<br />
Base<br />
Flap fittings www.hettich.com<br />
14,5<br />
2<br />
14<br />
36<br />
25<br />
Fasten with ø 3,5 DIN95 / DIN97 wood screws<br />
15<br />
2<br />
3<br />
22<br />
32 45<br />
Article Cabinet Dimensions mm<br />
internal height mm X Y A L<br />
Klassik D/300 300 - 350 182 100 88 153<br />
Klassik D/350 350 - 400 224 112 119 183<br />
Klassik D/400 400 - 450 252 126 134 203<br />
Klassik D/450 450 - 500 272 138 150 223<br />
Klassik D/500 500 - 550 322 175 184 273<br />
Klassik D/550 550 - 600 372 168 204 283<br />
8,5
Mounting example<br />
9<br />
20<br />
• With screw-on support and base<br />
• Support bar and base: nickel-plated steel<br />
• Support: white plastic or brown<br />
L<br />
30-45°<br />
Flap stays Centra S 250<br />
Finish Order no. PU<br />
white support 0 013 223 1/10<br />
brown support 0 013 224 1/10<br />
Markant<br />
14<br />
Flap fittings 3.4.53
3.4.54<br />
Flap stays KH<br />
Mounting example<br />
16<br />
Markant<br />
19<br />
• With screw-on support and base<br />
• Nickel-plated steel<br />
Length mm Order no. PU<br />
200 0 013 233 1/10<br />
250 0 013 235 1/10<br />
1/2L<br />
Flap fittings www.hettich.com<br />
L<br />
30-45°<br />
9