06.07 Style 741 (Metric) Vic-Flange Adapter PN10 and PN16

garitec.com

06.07 Style 741 (Metric) Vic-Flange Adapter PN10 and PN16

RPRODUCT DESCRIPTIONXABNote: Gray area of mating face mustbe free from gouges, undulations ordeformities of any type for effectivesealing.ZY WStyle 741 PN10/16 Vic-Flange adapters aredesigned for directly incorporatingflanged componentswith PN10 or PN16.Bolt hole patterns into agrooved pipe system. Sizes50 - 300 mm are hinged foreasy handling with integralend tabs which facilitateassembly.The design incorporatessmall teeth inside the keyshoulder I.D. to preventrotation. These teethshould be removed whenVic-Flange adapter is utilizedwith a Victaulic Series700 grooved end butterflyvalve, Schedule 5 pipe orplastic pipe.METRIC CARBON STEEL PIPEGROOVED SYSTEM 06.07Style 741 (Metric)Vic-Flange Ò AdapterPN10 and PN16Vic-Flange adapter Style741 may only be used onone side of Victaulic Series700 butterfly valves, sizes50 - 100 mm fitted withstandard or lever-lock handles.Vic-Flange adaptermust be assembled so itdoes not interfere with handleoperation.Vic-Flange adapters mayonly be used on Vic-300butterfly valves on one sidein 2 - 8" (50 - 200 mm) sizes.They are not recommendedfor 10 and 12"sizes.Because of the outsideflange dimension, Vic-Flange should not be usedwithin 90° of one anotheron a standard fitting. Whenwafer or lug-type valvesare used adjoining a Victaulicfitting, check discdimensions to assureproper clearance.Vic-Flange adapters shouldnot be used as anchorpoints for tie-rods acrossnonrestrained joints. Matingrubber faced flanges,valves, etc., require the useof a Vic-Flange washer.Vic-Flange gaskets mustalways be assembled withthe color coded lip on thepipe and the other lip facingthe mating flange.DIMENSIONSPipemm/inchesNom.SizeActualSizeMax.WorkPres.Bars*PSIMax.EndLoadN*lbs.Bolts†No.Req’d.SizemmMax.WorkPres.Bars*PSIMax.EndLoadN*lbs.No.Req’d.Bolts†SizemmSealing Surfacemm/inches“A”Max.Flange DimensionsMillimeters/inches“B”Min. W X Y Z50 60.3 10 285016 456160 87 185 165 125 20 1.42 2.38 145 640 4 16 230 1025 4 16 2.38 3.41 7.28 6.50 4.92 0.79 3.165 76.1 10 454016 727576 103 207 185 145 20 2.12¹⁄₂ 3.00 145 1020 4 16 230 1635 4 16 3.00 4.05 8.15 7.28 5.71 0.79 4.780 88.9 10 621016 992589 115 216 200 160 22 2.43 3.50 145 1395 8 16 230 2230 8 16 3.50 4.53 8.50 7.87 6.30 0.87 5.4100 114.3 10 1026016 16420114 141 252 229 180 24 3.54 4.50 145 2305 8 16 230 3690 8 16 4.50 5.55 9.94 9.00 7.09 0.94 7.7150 168.3 10 2225016 35600168 198 303 278 240 25 4.56 6.63 145 5000 8 20 230 8000 8 20 6.63 7.78 11.93 10.94 9.45 100 10.0165.1 10 2140016 34236165 195 303 280 240 25 4.5165.1 6.50 145 4811 8 20 230 7632 8 20 6.50 7.68 11.93 11.00 9.45 100 10.0200 219.1 10 3769016 60320219 252 369# 344# 296# 30# 7.58 8.63 145 8470 8 20 230 13555 12 20 8.63 9.94 14.53 13.54 11.65 1.19 16.6250 273.0 10 5856016 93695273 313 402§ 382§ 350§ 30§ 11.010 10.75 145 13160 12 20 230 21055 12 24 10.75 12.31 15.83 15.04 13.78 1.19 24.2300 323.9 10 8237016 131810324 365 461 444 410 32 17.412 12.75 145 18510 12 20 230 29620 12 24 12.75 14.31 18.15 17.48 15.75 1.26 38.4* Refer to notes on Page 2.# PN16 dimensions (mm): W = 360; X = 340; Y = 295; Z = 30. § PN16 dimensions (mm); W = 432; X = 406; Y = 362; Z = 30.† Total bolts required, to be supplied by installer. Bolt sizes for conventional flange-to-flange connection.Longer bolts required when flange utilized with wafer-type valves.IMPORTANT NOTES: Style 741 Vic-Flange adapters provide rigid joints when used on pipe with standard cut or roll groove dimensions and consequently allow no linear or angularmovement at the joint. When used with Victaulic Series 700 butterfly valves, plastic pipe or light wall metallic pipe, small teeth in I.D. of key section should be removed and may onlybe used on one side of the valve. Contact Victaulic for information on AS2129 - Table E; ISO 2084 (PN10); DIN 2532 (PN10) and JIS B-2210 (10k) flanges.06.07-1AAprx.Wgt.Ea.kglbs.Victaulic International • P.O. Box 31, Easton, PA 18044-0031 • 4901 Kesslersville Rd., Easton, PA 18040 USA • 610/559-3300 • FAX: 610/559-36081658 Rev.A 10/96 Ò Registered Trademark Victaulic Company of America Ó Copyright 1996 Victaulic Company of America Printed in U.S.A.

More magazines by this user
Similar magazines