Aufrufe
vor 4 Jahren

CMT-Tools -2013

Holzbearbeitungswerkzeuge

CMT

CMT Orange Tools High-grade tungsten carbide If steel is what gives our tools strength, carbide is what gives them intelligence. The capacity of the carbide tip to cut precisely and to last a long time is critical for the performance of any tool, so at CMT we use only premium micrograin carbide from Luxembourg to make the tips for our router bits. MANUFACTURING Turning, Milling and Cutting Our biggest investment in recent years has been in upgrading production. Today, all machinery at CMT is fully automated. CNC machines run by specially trained operators make sure that the shanks and bodies of our router bits and boring bits are accurate and perfectly balanced. Grinding and Sharpening The final step in the production process is no different from the rest: sharpening and grinding are done to extreme precision on multi-axis CNC machines. Each bevel and angle is ground or sharpened to the micron, to produce a cutting edge that is both razor sharp yet extremely durable. Saw blades Tools with bore & Knives Router Bits & Sets 680°C in seconds - and the brazing is complete. CNC Router Cutter & Chucks Heat forged steel bodies for large diameter bits No router bits are exactly the same, sometimes not even in the way they are made. Certain bits require a few more steps than others, like heat forging the steel of larger diameter bits before turning it down into precise bit bodies. This extra step produces a radial grain orientation which gives large diameter bits extra strength and durability. Brazing We have pioneered the art of brazing. Not only does our unique custom-designed computerized brazing equipment help eliminate the inconsistencies found in old fashioned hand brazing, but our silver-copper-silver brazing 'sandwich' provides a tight bond between the steel and the carbide, with a shock absorbing effect to protect the carbide tips when cutting harder woods. Specially formulated carbide for specific applications You have to cut every kind material, so we make sure that our carbide tips can handle each individual job. This means specially formulating the carbide of each tool so that the compositions vary from being super hard (for tough cutting jobs like laminates) to being less hard (to absorb the impact when cutting large profiles) and everything in between. QUALITY CONTROL - In even the most carefully done task, there's always room for error. However at CMT, we take measures to prevent even this. Just like we have always done, we manually check the quality of our tools at each step of the manufacturing process, and we still make test cuts with rail & stile bits to make sure the cut fits. However, now we also use a fully automatic measuring process that measures every dimension of the tool without actually coming into contact with it, to make sure that the tool measurements are accurate and that the profiles conform precisely to technical specifications. We also use this system to gauge the wear and tear on the CNC machines. CMT’s fully automatic measuring system. www.cmtutensili.com Industrial Dowel Drills Bits for Hand Power Tools Spare Parts Power Tools & Accessories 5Display Cabinets

Saw blades CMT Orange Tools HOW WE PRODUCE OUR HIGH QUALITY BLADES CMT stands for quality, which means we put quality into everything we do. It only makes sense. At CMT we figure that if our router bits are going to be top quality, high-performance and orange, then our saw blades should be too. And to do that, we simply follow the same guidelines for our blades that we do for our bits: start with a solid design, use only the best materials and manufacture with skill and care. And of course, make sure they are trademark orange. CNC Router Cutter & Chucks Router Bits & Sets Tools with bore & Knives Industrial Dowel Drills Bits for Hand Power Tools Spare Parts Power Tools & Accessories 6Display Cabinets DESIGN - The simplicity of a circular saw blade design is in reality a complexity of technical considerations. Each blade has to make a certain type of cut, and this requires careful analysis of hook and grind angles, gullet designs, to location of sound dampening slots and the thickness of the blade - just to name a few. So in order for us to get the best design for our blades - and for you to get the best performance from them - we use the same method that we use to engineer our router bits: we combine the knowledgeable minds and experience of our technical department and the latest computer technology. The result is a superior blade that has some rather special “standard” features: Anti-vibration design - The anti-vibration cuts in the blade do exactly what their name implies: they are the anti in anti-vibration. This translates into less chattering during cutting and consequently it lengthens the life of the blade. Anti-vibration also means a flawless cut, so stabilizers and scoring blades are no longer necessary. Expansion slots - These little hook-shaped cuts in the blade help to reduce noise while regulating the expansion and contraction of the blade as it generates heat during cutting operations. MATERIALS - When it comes down to it, saw blades are much like router bits - it's just two components: steel and carbide. So in selecting the raw materials, we are every bit as picky with our saw blades as we are with our router bits. Besides, why mess with a winning formula like superior steel and tungsten carbide? Steel - It's the heart of the blade, so CMT uses only the finest steel available: super 42-44 Rockwell hardness steel. Carbide - The cutting tips of every CMT blade are made from the best grades of micrograin carbide. Laser cutting the steel plates. MANUFACTURING - CMT saw blades are machined on automated CNC machines, from start to finish. The advanced technology and precision of these machines ensures uniform quality on every blade while giving us the possibility to carry out more efficient quality controls. Laser cutting - The steel plate of the blade is laser cut, NEVER die cut, from superior strength steel. This way of cutting steel is not only extremely precise but it makes it possible to cut harder strengths of steel and does not stress the plate while cutting, so the resulting blade is flat and true and more resistant to warping. www.cmtutensili.com

  • Seite 1 und 2: Saw Blades Cutter Heads & Knives Ro
  • Seite 3 und 4: Abbreviations A = Cutting angle α
  • Seite 5 und 6: Saw blades CMT Orange Tools SINCE 1
  • Seite 7: Saw blades Tools with bore & Knives
  • Seite 12 und 13: Saw blades Products Page Multi-rip
  • Seite 14 und 15: Since 1962 Since 1962 Multi-rip saw
  • Seite 16 und 17: Since 1962 Rip & crosscut saw blade
  • Seite 19 und 20: Since 1962 Since 1962 Saw blades Su
  • Seite 22 und 23: Since 1962 Since 1962 Laminated and
  • Seite 24 und 25: Since 1962 Panel sizing saw blades
  • Seite 26 und 27: Since 1962 Non-ferrous metal and la
  • Seite 28 und 29: WWW.CMTUTENSILI.COM Since 1962 © C
  • Seite 30 und 31: Ultra industrial thin-kerf blades C
  • Seite 32 und 33: Saw blades for building contractors
  • Seite 34 und 35: Crosscut saw blades for portable ma
  • Seite 36 und 37: Precision dado 230 CMT thoroughly r
  • Seite 38 und 39: Since 1962 1962 Mini-spot circular
  • Seite 40 und 41: Saw blades for portable machines MA
  • Seite 42 und 43: Saw blade index D mm B mm Applicati
  • Seite 44 und 45: Saw blade index D mm B mm Applicati
  • Seite 46 und 47: Tools with bore & knives Products P
  • Seite 48 und 49: 3 piece adjustable grooving sets 69
  • Seite 50 und 51: 2 piece adjustable rounding & chamf
  • Seite 52 und 53: Adjustable chamfer cutter heads wit
  • Seite 54 und 55: Multiradius roundover cutter heads
  • Seite 57 und 58: Saw blades Tools with bore & Knives
  • Seite 59 und 60:

    R5 Saw blades Tools with bore & Kni

  • Seite 61 und 62:

    Saw blades Tools with bore & Knives

  • Seite 63 und 64:

    Saw blades Tools with bore & Knives

  • Seite 65 und 66:

    Saw blades Tools with bore & Knives

  • Seite 67 und 68:

    Profile knives and limiters Cutting

  • Seite 69 und 70:

    Profile knives and limiters Cutting

  • Seite 71 und 72:

    Profile knives and limiters Cutting

  • Seite 73 und 74:

    Saw blades Profile knives and limit

  • Seite 75 und 76:

    Profile knives and limiters Cutting

  • Seite 77 und 78:

    Profile knives and limiters Cutting

  • Seite 79 und 80:

    Profile knives and limiters Cutting

  • Seite 81 und 82:

    Saw blades Tools with bore & Knives

  • Seite 83 und 84:

    Saw blades Tools with bore & Knives

  • Seite 85 und 86:

    Saw blades Tools with bore & Knives

  • Seite 88 und 89:

    Router bits & Sets Products Page St

  • Seite 90 und 91:

    Solid carbide spiral bits ... Z2 up

  • Seite 92 und 93:

    Straight bits, short series D mm I

  • Seite 94 und 95:

    Straight bits with centre tip S L H

  • Seite 96 und 97:

    5%co HS spiral bits for aluminium p

  • Seite 98 und 99:

    Straight router bits with insert kn

  • Seite 100 und 101:

    Hinge recesser bits S 7/902 HW Z2 R

  • Seite 102 und 103:

    Pattern router bits with insert kni

  • Seite 104 und 105:

    Combination trimmer bits L I L I L

  • Seite 106 und 107:

    Super-duty flush trim bits S HW Z2

  • Seite 108 und 109:

    Flush trim bits with insert knives

  • Seite 110 und 111:

    Panel pilot bits with guide S HW HW

  • Seite 112 und 113:

    Rabbeting bits S L 7/8/935 CMT carb

  • Seite 114 und 115:

    Keyhole bits 7/8/950.001 HWM Z2 Wi

  • Seite 116 und 117:

    Three wing slot cutter set S L HW Z

  • Seite 118 und 119:

    Slot cutters 923A - 823B HW The po

  • Seite 120 und 121:

    Lock miter bits S D 8/955.504 L HW

  • Seite 122 und 123:

    Drawer lock bits S L 855.508 - 955.

  • Seite 124 und 125:

    Wainscot/paneling bits S 8/961.6 HW

  • Seite 126 und 127:

    Professional finger joint bit 8/9

  • Seite 128 und 129:

    Dovetail bits 7/8/918 - 7/818B Here

  • Seite 130 und 131:

    60° Lettering bit 8/949B 7/8/949

  • Seite 132 und 133:

    V-Grooving bits for Alucobond®

  • Seite 134 und 135:

    Chamfer bits S L 7/8/936 - 8/957 CM

  • Seite 136 und 137:

    Ball milling S 8/968 Cut channels f

  • Seite 138 und 139:

    Cavetto edge mold bits R mm S D mm

  • Seite 140 und 141:

    Roundover bits S D R I 7/8/938 The

  • Seite 142 und 143:

    Ovolo sash bits S 8/955.3 These bit

  • Seite 144 und 145:

    Bead & Bull nose bits S 7/8/954 CMT

  • Seite 146 und 147:

    Ogee with fillet bits S 7/8/946 Tak

  • Seite 148 und 149:

    Decorative ogee bits S 7/8/965 Enha

  • Seite 150 und 151:

    Multiprofile bits S 8/956.8 HW Crea

  • Seite 152 und 153:

    Molding bits S 8/967.5B CMT’s new

  • Seite 154 und 155:

    Table edge and hand rail bits S 8/9

  • Seite 156 und 157:

    Raised panel bits S D I L 8/990.5 H

  • Seite 158 und 159:

    Rail & Stile sets 8/991.5 HW Z2

  • Seite 160 und 161:

    Stile & panel router bits 8/970 The

  • Seite 162 und 163:

    Solid surface rounding over bowl bi

  • Seite 164 und 165:

    Solid surface no-drip bit 8/981.501

  • Seite 166 und 167:

    Router bit sets PATENT NO. 7,703,60

  • Seite 168 und 169:

    Router bit set with insert knives 6

  • Seite 170 und 171:

    12 piece router bit set with wooden

  • Seite 172 und 173:

    Entry & interior door router bit se

  • Seite 174 und 175:

    Kitchen sets PATENT NO. 7,703,605 B

  • Seite 176 und 177:

    The raised panel sets with backcutt

  • Seite 178 und 179:

    CNC router cutters & chucks Product

  • Seite 180 und 181:

    ISO30 chucks for “ER32” precisi

  • Seite 182 und 183:

    HSK chucks for “ER40” precision

  • Seite 184 und 185:

    “ER20” precision collets D3 184

  • Seite 186 und 187:

    Saw blade arbor with parallel shank

  • Seite 188 und 189:

    Solid carbide up & downcut spiral b

  • Seite 190 und 191:

    Solid carbide upcut spiral bits L I

  • Seite 192 und 193:

    Solid carbide downcut spiral bits L

  • Seite 194 und 195:

    Spiral bits with insert knives and

  • Seite 196 und 197:

    DP router cutters with shear angle

  • Seite 198 und 199:

    Solid carbide router cutters L I 9,

  • Seite 200 und 201:

    Router cutters for drywall openings

  • Seite 202 und 203:

    Complete set for decorating and eng

  • Seite 204 und 205:

    Complete set for MDF doors insert k

  • Seite 206 und 207:

    Slot and mortise boring bits S 166-

  • Seite 208 und 209:

    Twisted slot mortising bits with ch

  • Seite 210 und 211:

    Reciprocating slot mortising bits L

  • Seite 212 und 213:

    Industrial dowel drills Products Pa

  • Seite 214 und 215:

    Adaptors 41 25 S Ø11 305 D3 mm D2

  • Seite 216 und 217:

    Setting a new standard for performa

  • Seite 218 und 219:

    Solid carbide dowel drills for thro

  • Seite 220 und 221:

    Dowel drills for through holes 26 S

  • Seite 222 und 223:

    Solid carbide twist drills “V”

  • Seite 224 und 225:

    2 flute dowel drills S 30 L I D 311

  • Seite 226 und 227:

    4 flute dowel drills S 20 L I D 308

  • Seite 228 und 229:

    Dowel drills with countersink 15

  • Seite 230 und 231:

    4 flute dowel drills for through ho

  • Seite 232 und 233:

    Hinge boring bits L 26 S D New cons

  • Seite 234 und 235:

    Dowel drills with threaded shank S

  • Seite 236 und 237:

    Dowel drills with threaded shank wi

  • Seite 238 und 239:

    Bits for hand power tools Products

  • Seite 240 und 241:

    Adaptors LB S 503 ...with threaded

  • Seite 242 und 243:

    Boring bits with parallel shank S 5

  • Seite 244 und 245:

    Boring bits with parallel shank S 3

  • Seite 246 und 247:

    Boring bit and plug cutter sets 500

  • Seite 248 und 249:

    Rosette cutters L S 531 D mm L mm S

  • Seite 250 und 251:

    Drill bits for “ANUBA” hinges L

  • Seite 252 und 253:

    Dowel drills for Mafell® and hand-

  • Seite 254 und 255:

    Countersinks with parallel shank S

  • Seite 256 und 257:

    Spare part and Accessories 40 20 43

  • Seite 258 und 259:

    Spare part and Accessories 1/8W s

  • Seite 260 und 261:

    Power tools, jigs accessories & dis

  • Seite 262 und 263:

    Saw blades 1000W router MADE IN TAI

  • Seite 264 und 265:

    Saw blades 82mm hand planer PERFECT

  • Seite 266 und 267:

    Saw blades Tools with bore & Knives

  • Seite 268 und 269:

    Saw blades Tools with bore & Knives

  • Seite 270 und 271:

    Saw blades Tools with bore & Knives

  • Seite 272 und 273:

    Saw blades Power Tools & Accessorie

  • Seite 274 und 275:

    Saw blades Universal hinges boring

  • Seite 276 und 277:

    Saw blades Tools with bore & Knives

  • Seite 278 und 279:

    Saw blades Tools with bore & Knives

  • Seite 280 und 281:

    Saw blades Tools with bore & Knives

  • Seite 282 und 283:

    Saw blades 3D Router Carver system

  • Seite 284 und 285:

    Saw blades Tools with bore & Knives

  • Seite 286 und 287:

    Saw blades Digital angle gauge DAG-

  • Seite 288 und 289:

    Saw blades Display cabinets This st

  • Seite 290 und 291:

    Saw blades Saw blades display cabin

  • Seite 292 und 293:

    Saw blades Tools with bore & Knives

  • Seite 294 und 295:

    Saw blades Tools with bore & Knives

  • Seite 296 und 297:

    Numerical index Saw blades Tools wi

  • Seite 298 und 299:

    Saw blades Tools with bore & Knives

  • Seite 300 und 301:

    WWW.CMTUTENSILI.COM Since 1962 © C

  • Seite 302:

    C.M.T. UTENSILI S.p.A. Via della Me

Holzbearbeitungswerkzeuge SATURN
Katalog 2009-2010_WEB.pdf - Fisch-Tools
Katalog 2006 jetzt anschauen - Feida Tools Deutschland GmbH
Woodworking tools 131 Holzbearbeitung - Bernardo
Hand Tools Catalogue Katalog der Handwerkzeuge 2007 ... - Modeco