Erfahrungs- und Forschungsbericht 2012 - Ensi

Erfahrungs- und Forschungsbericht 2012 - Ensi

8. Conferences and Seminars

NUGENIA network meeting, March 26–28, 2012,

Budapest, Hungary.

5 th International Conference on Engineering

Failure Analysis, 1–4 July 2012, The Hague, The

Netherlands, Deterministic and probabilistic analysis

of a reactor pressure vessel (RPV) subjected

to pressurized thermal shocks (PTS), G. Qian, M.


1 st International Conference of the International

Journal of Structural Integrity, 25–28 June 2012,

Porto, Portugal, Probabilistic assessment of

pipelines containing corrosion defects with correlated

input parameters based on FITNET FFS

procedure, G. Qian, M. Niffenegger.

Soteria, Training Symposium on Irradiation

Effects in Structural Materials for Nuclear Reactors,

17–21 September 2012, Seville.

9 References

[1] M. Niffenegger, H.P. Seifert, Projektantrag

PISA zu Handen des ENSI, AN-46-09-03,


[2] M. Niffenegger, H.P. Seifert, G. Qian, Projektantrag

PISA-II zu Handen des ENSI, AN-46-12-

01, 12.3.2012.

[3] ENSI Research Report 2010.

[4] ENSI Research Report 2011.

[5] S. Chapuliot et al. WPS Criterion proposition

based on experimental database interpretation,

Fontevraud 7, 26–30 September 2010

Contribution of Materials Investigations to

improve the Safety and Performance of LWRs,

paper reference no.A0141.

[6] R.Beleznai, Sz. Szavai, 2010. Analysis of Warm

Prestressing effect on fracture toughness of

reactor pressure vessel steels. Strength of Materials


[7] D. Moinereau et al. NESC VII (2008–2012),

A European project (NESC VII) for the application

of WPS in RPV assessment including

biaxial loading, Status September 2011.

[8] G.G. Chell, J.R. Haigh, V. Vitek, 1981. A theory

of warm prestressing: experimental validation

and the implications for elastic plastic

failure criteria. Int. J. Fract. 17, 61–81.

[9] D.A. Curry, 1981. A micromechanistic approach

to the warm pre-stressing of ferritic

steels. Int. J. Fract. 17, 335–43.

[10] K. Wallin, 2003. Master Curve implementation

of the warm pre-stress effect. Eng. Fract.

Mech. 70, 2587–2602.

[11] ABAQUS 6.11 Manual, Version 6.12, Hibbtt

Karlson & Sorensen, Inc., 2011.

[12] K. Wallin, 2001. Quantifying T-stress controlled

constraint by the master curve transition

temperature T 0 . Eng. Fract. Mech. 68,



ENSI Erfahrungs- und Forschungsbericht 2012

Weitere Magazine dieses Users