IC 1 Konfigurator merten@home

merten.de

IC 1 Konfigurator merten@home

IC1 configurator merten@home.

Modules

The Modules section provides additional configuration options and shows individual modules of the project

tree.

Preset Options

As a default setting, the configuration tool displays an empty project when you start it for the first time.

However, you can open demo projects by selecting "File/Load configuration". These are sample projects

that you can modify to meet your requirements. After you have made changes to a demo object, you

should rename it. If you do not want to use the demo objects, you should delete them.

| A project will be saved in a directory. To open a project you only have to select the directory.

| With the IC1 merten@home configurator 2.0 you can configurate merten@home for a IC1 and also

for a IC1-V2.

Befor you start a configuration you have to select the correct device-type in the menu !

A basic structure has been pre-defined for merten@home. The top-level items (floors, rooms, functions,

programs and favourites) cannot be changed. Within these groups, you can add, rename and delete nodes

as well as change their order.

Select and right-click an item to display the options available.

New merten@home configuration

: A new merten@home user interface for the IC 1 Internet Controller

woulb be generated. All the next configurations and settings for theis merten@home unser interface

are stored and saved with this project name.

| In an IC 1 Internet Controller only one merten@home-configuration can be stored. Every upload to

the IC 1 Internet Controller overwrite the existing merten@home configuration.

Selecting a Language for merten@home

Set the language in which you want the menu items on the merten@home page to be displayed by selecting

"Device data/Basic data".

If you change the language setting later, you must re-transfer the project to the IC 1 Internet Controller.

Importing ETS-OPC

To import the KNX data points from an KNX project, you first have to save the project data in ETS in OPC

format.

To do this, you access ETS and select "File/Data exchange (for example, OPC)". In the selection window

that opens, select "Export to OPC server".

You can then load this data in the configuration tool by selecting "File/Import ETS-OPC" in the configuration

tool.

3

Weitere Magazine dieses Users
Ähnliche Magazine