IC 1 Konfigurator merten@home

merten.de

IC 1 Konfigurator merten@home

IC1 configurator merten@home.

Switching Times

Overview of weekly switching times which have already been created.

A weekly switching time defines two daily switching times and the days of the week on which they

are to apply for building functions which are executed regularly.

An annual switching time defines two daily switching times and the days in the year on which they

are to apply for building functions which are executed every year.

You can create up to 20 weekly switching times and up to 6 annual switching times.

To define switching times, proceed as follows:

1. Click on the "Weekly switching times" or the "Annual switching times" module.

If any switching times have been defined previously, these are displayed in the centre section of the

screen. Otherwise blank fields are displayed where you can enter new switching times.

2. Click a field. You can then specify the required settings in the bottom section of the screen.

Every weekly switching time cycle you create must be given a unique name (for example, Wake Up)

so that you can assign the relevant building functions (such as Living room lighting) to it later in merten@home.

Any building functions that have already been assigned are shown in the "Objects to switch" list. To

insert new building functions, simply drag and drop them from the KNX/IC 1 elements using the

mouse. Use the right mouse button to delete an object.

"Value 1" and "Value 2" are assigned to "Switching time 1" and "Switching time 2" respectively.

They define the value the building function assumes at the time the switching operation is performed.

You can assign weekly switching times to annual switching times (annual switching times define

days in the year on which functions are to be executed). When the corresponding annual switching

times are active, the weekly switching times assigned to them will only be executed on the days

set for these annual switching times. Existing annual switching times are listed in the "Annual switching

times with priority" window, and you can assign weekly switching times accordingly (by

clicking the tick box).

3. Click "Apply". The next time you upload data to the IC 1 Internet Controller, the settings are modified

in the IC 1 Internet Controller.

| When working with annual switching times, make sure only those days on which you want these

switching times to be applied are shown in bold. Unless you click on a specific day within the month,

the day display is set to the current date. If you click too often, this may result in the respective day

being highlighted.

13

Weitere Magazine dieses Users
Ähnliche Magazine