IC 1 Konfigurator merten@home

merten.de

IC 1 Konfigurator merten@home

IC1 configurator merten@home.

Switching a lighting scene:

If you click the button for variable 1 on the homepage, the IC 1 Internet Controller sends three preset

values (value 1, 2 and 3) to three different KNX objects (KNX object 1, 2 and 3). With this macro you can

switch a number of KNX objects simultaneously. The variable 1 is set after the switching immediately

again on the value 0. With it you get a push-button function which prevents that permanently on the bus

is written.

Var1

Val1

0

KNX EIB1

KNX EIB1 KNX EIB3

KNX

Var1

KNX KNX

Val2

Val3

Value monitoring:

If the value of an KNX object 1 is above or below a preset value 1, the IC 1 Internet Controller sends a

telegram with preset value 2 to the KNX object 2.

KNX EIB1

KNX

Val1

Val2

KNX EIB2

KNX

Frequent errors:

Several sources may not write to one KNX object simultaneously. This would cause an internal conflict,

with the result that the IC 1 Internet Controller only executes the last command. This rule regarding multiple

writing processes onto an KNX object applies both to writing within one macro and within several

macros. In the example shown, only variable 2 would trigger a switch action at KNX object 1. The next

example "Two switch statuses on one KNX object" illustrates the correct solution.

Var1

KNX EIB1

KNX EIB1

KNX KNX

Var1

Var2

Var2

21

Weitere Magazine dieses Users
Ähnliche Magazine