EN | Product Range

PRICE PRODUCT LIST 2024/2025 RANGE

GÖWEIL Maschinenbau GmbH


Davidschlag 11 / 4202 Kirchschlag / Austria

Tel: +43 (0) 7215 2131-0 / Fax: +43 (0) 7215 2131-9

office@goeweil.com / www.goeweil.com

2024/2025 price list valid from September 1 st , 2024

• All prices are excluding value-added tax.

• This price list supersedes all previous price lists.

• All specified information is without obligation.

• We reserve the right to make changes to prices and designs.

YOUR CONTACT PERSON:

ROUND BALER

G-1 F125 6

BALER WRAPPER COMBINATIONS

G-1 F125 Kombi 12

G5050 Kombi 16

BALER WRAPPER COMBINATIONS

LT-Master F115 27

ROUND BALE WRAPPERS

G1015 38

G2020 40

G3010 42

G3010 Farmer 44

G3010 Profi 46

SQUARE BALE WRAPPERS

G3010 Q 56

G3010 Q Farmer 58

G3010 Q Profi 60

PALLET WRAPPER

G1010 68

BALE TRANSPORT DEVICES

TDE, TDD 72

BTGME 73

BTGHA, DTR 74

BTGHY 75

RBG 76

HIGH LIFT BUCKETS

GHU 06 Mini 86

GHU 08 88

GHU 10 90

GHU 12 92

BLADE SHARPENER

MS 100 102

LT-Master F115 21

VARIO-Master V140 31

G5010 48

G5012 50

G5020 52

G4010 Q Profi 62

G4020 Q Profi 64

BTGQU 77

GFM 78

BALE OPENING DEVICES

RBS 80

RBA 81

GHK 94

GHS 10 Forklift 96

GHS 12 Forklift 98

EXHIBITION

DRAWBAR

TERMS AND

STANDS

EYE TYPES TIRES

ATTACHMENTS CONDITIONS

2

103

104 105 106 112

3

G-1 F125

ROUND BALER

Tailgate of the G-1F125

ISOBUS program control

BASIC MODEL - WITH EU type-approval

Hydraulic system

Load sensing (can also be operated in conjunction with tractors without load sensing pump)

Pick-Up

Camless pendulum Pick-Up, DIN rake width: 2.20 m, rows of tines: 6, tine spacing: 51 mm, plastic

strippers, twin rollers, touch wheels with pneumatic tires

Feeding system

6-star rotor; hydraulic drop floor; cutting unit with 30 twin blade reversible knives;

cutting length: 35 mm; hydraulic bar safety device

Bale chamber

18 steel rollers (4 mm) reinforced on the inside (including cleaning & starter roller);

double-row pendulum roller bearings

Binding unit

Net binding, hydraulically adjustable brake roller; automatic monitoring

Drawbar: rigid drawbar

Chassis & tires

Single axle; tires: 500/60-R22.5 FL630 Plus;

brake system: dual-line air brake system

Drive

PTO speed: 1,000 rpm, AFC Auto Flow Control: split drive concept,

overload safeguard with 2 cam switch couplings; chains: main drive – bale chamber:

24 OH, secondary drive of bale chamber: 100 HSP; rotor: 80 HSP Triplex, Pick-Up: 80 HSP

Maintenance: fully automatic central lubricator for grease and oil

Control: Fully automatic program control ISOBUS (without terminal)

TECHNICAL DATA // BASIC MODEL

Weight 5,580 kg Height – single binding unit 2,700 mm

Length 4,735 mm Height – dual binding unit 2,850 mm

Width (500/60-R22.5)

Width with drive axle

Oil requirement

4735

G-1 with single binding unit

2,550 mm

2,690 mm

2700

Bale diameter

starting at 40 l/min at 200 bar - optimal: starting at 65 l/min at 200 bar

4735

G-1 with dual binding unit

2550

2850

All specifications in mm

1.25 m

REQUIRED CONNECTIONS

Load Sensing connection (for LS mode) or one pressure connection and one depressurized return for the supply of the

round baler

Electrical power supply to the machine via ISOBUS connector or the included wiring harness

7-pin socket for the entire lighting system (except work lights)

6 7

G-1 F125

ROUND BALER

FILM & NET BINDING

7,0“ TERMINAL

BALE CATCHER

4,3“ TERMINAL

ADDITIONAL EQUIPMENT

Tires 600/50-R22.5 Flotation Trac (extra charge added to standard tires)

Width altered to 2,770 mm | With drive axle: Width altered to 2,890 mm

Tires 710/40-R22.5 Flotation Trac (extra charge added to standard tires)

Width altered to 2,970 mm

Swiveling touch wheels: extra charge added to basic model “Touch wheels with pneumatic tires”

Bale ramp

A bale ramp can be used to deposit the bale outside of the swivel range of the tailgate. Resetting

the machine is not necessary.

Bale catcher – allows for easier bale dropping in slope positions

Attention! Cannot be used in combination with the bale ramp.

Film binding unit with camera system

2 cameras for monitoring binding and bale deposit, including color monitor

Dual binding unit

The bale is wrapped simultaneously in two nets or wide films.

This cuts the binding time for the bale in half.

Hydraulic articulated drawbar

Hydraulic articulated drawbar with two double-acting cylinders

Hydraulic articulated drawbar with suspension

Hydraulic articulated drawbar affords the operator an exceptionally smooth ride

Drive axle, complete

Hydraulic drive uphill, automatic braking function downhill, ABS system

Automatic regulation, parameters can be set on the terminal

Only in combination with tires 500/60-R22.5 and 600/50-R22.5

Terminal ISOBUS S (4.3") with 8 buttons and encoder

BALE CHAMBER

Cleaning roller

150 mm (6“)

PENDULUM PICK-UP

Terminal ISOBUS L (7.0") with 12 buttons and encoder

ISOBUS-capable power supply for tractor

Wiring harness is required if ISOBUS is not available on the tractor

LED work lights

Camera system

2 cameras for monitoring binding and bale deposit, including color monitor

Silage additive dosage

Dosistar control unit, pump with filter, electronic flow meter,

various nozzles, 100 l tank

Cleaning kit with air pressure

Consisting of compressed air hose and air gun, used for cleaning the round baler.

Only in conjunction with air brake system!

Drawbar eye types: A, C, D, F (for an overview, see page 104) – please specify when placing

your order!

as given in overview

Starter roller

AFC AUTO FLOW CONTROL

Drive

Rotor

Drive

bale chamber

COUNTRY-SPECIFIC EQUIPMENT

Dual-line hydraulic brake system - with emergency brake valve and accumulator

Extra charge added to basic model

Rotating light (height – single binding unit: 2,860 mm // height – dual binding unit: 2,915 mm)

Freight costs net

Training net

8 9

G-1 F125

SILAGE ADDITIVE DOSING UNIT

BENEFITS / FEATURES:

ROUND BALER

• Dosing device for lactic acid bacteria

• Suitable for minimally corrosive acids

• Self-priming pump with filter, flow meter &

electrical speed controller

• Two spray nozzles

• The dosing unit is switched on or off via the Pick-Up

and / or the infeed roller

• Inspection glass for quantity control

• Display for quantity indication l/h, day quantity counter

• Dosing adjustment via electric speed controller

• Can be calibrated for acids of different viscosity

• Technical data:

Dosing capacity: 20 – 150 l/h

Drive: 12 volt (DC)

Tank size: 100 l, with complete emptying

DRIVE AXLE


• Maximum safety and maximum comfort in every position

– uphill and downhill

• The sensor system integrated in the drawbar

controls the operating states of the drives

– Neutral – brake is completely autonomous.

• The driver can concentrate fully on the work

• A clearly organized display continuously informs the

driver of all relevant parameters

• The system enables maximum traction with 100 %

soil protection

Display

Tractor

12 V power supply

Control signals V/N/R/B

Electronic

control

LS TL

P

SYSTEM REQUIREMENTS IMPOSED ON THE TOWING VEHICLE:

• Pressurized oil supply starting from Power-Beyond (LS)

• Oil delivery capacity for G-1 F125 Kombi: optimal starting at 105 l/min

• Oil delivery capacity G-1 F125: optimal starting at 65 l/min

• Operating pressure: 200 bar

• 12-volt signal from the reverse gear

• 12-volt signal from the brake light

• 12-volt power supply

• Yoke / ball-type hitch (K80)

10

G-1 F125 KOMBI

BALER-WRAPPER COMBINATION


Hydraulic system

Load sensing (can also be operated in conjunction with tractors without load sensing pump)

Pick-Up

Camless pendulum Pick-Up, DIN rake width: 2.20 m, rows of tines: 6, tine spacing:

51 mm, plastic strippers, twin rollers, touch wheels with pneumatic tires

Feeding system

6-star rotor; hydraulic drop floor; cutting unit with 30 twin blade reversible knives;

cutting length: 35 mm; hydraulic bar safety device

Bale chamber

18 steel rollers (4 mm) reinforced on the inside (including cleaning & starter roller);

double-row pendulum roller bearings

Binding unit with camera system

Film and net binding, hydraulically adjustable brake roller, automatic monitoring

2 cameras for monitoring film binding and bale deposit, including color monitor

Drawbar: rigid drawbar

Chassis & tires

Tandem axle chassis; tires: 560/45-R22.5 Flotation Trac;

brake system: dual-line air brake system

Drive

PTO speed: 1,000 rpm, AFC Auto Flow Control: split drive concept,

overload safeguard with 2 cam switch couplings;

chains: main drive – bale chamber: 24 OH, secondary drive of bale chamber: 100 HSP

Rotor: 80 HSP Triplex, Pick-Up: 80 HSP

Maintenance: Fully automatic central lubricator for grease and oil

Control: Fully automatic program control ISOBUS (without terminal)

Wrapping machine

Twin wrapping arm; hydraulically actuated wrapping table; bale deposit backwards;

4 bale conveyor belts including belt guide; 4 bale guide rollers; film pre-stretcher for

750 mm; Film cutter basic; film monitoring unit; single-film mode; hydraulically lowering, closed film

storage for 14 rolls of film and 2 rolls of wide film

or netting; LED work lights; additional roller for wrapping table


Weight 8,980 kg Height – single binding unit 2,820 mm

Length 7,420 mm Height – dual binding unit 2,820 mm

Width (560/45-R22.5) 3,000 mm Bale diameter 1.25 m

7420 7420

G-1F125 Kombi with single binding unit

G-1F125 Kombi with dual binding unit


12 13

Bale deposit

Oil requirement

starting at 80 l/min at 200 bar - optimal: starting at 105 l/min at 200 bar

2820

ISOBUS program control



round baler


3000

2820

All specifications in mm

G-1 F125 KOMBI

SILAGE ADDITIVE DOSING UNIT

DRIVE AXLE


• Maximum safety and maximum comfort in every position

– uphill and downhill

• The sensor system integrated in the drawbar

controls the operating states of the drives

– Neutral – brake is completely autonomous.

• The driver can concentrate fully on the work

• A clearly organized display continuously informs the

driver of all relevant parameters

• The system enables maximum traction with 100 %

soil protection



• Dosing device for lactic acid bacteria

• Suitable for minimally corrosive acids

• Self-priming pump with filter, flow meter &

electrical speed controller

• Two spray nozzles

• The dosing unit is switched on or off via the Pick-Up

and / or the infeed roller

• Inspection glass for quantity control

• Display for quantity indication l/h, day quantity counter

• Dosing adjustment via electric speed controller

• Can be calibrated for acids of different viscosity

• Technical data:

Dosing capacity: 20 – 150 l/h

Drive: 12 volt (DC)

Tank size: 100 l, with complete emptying

Display

Tractor

12 V power supply

Control signals V/N/R/B

Electronic

control

LS TL

P

SYSTEM REQUIREMENTS IMPOSED ON THE TOWING VEHICLE:

• Pressurized oil supply starting from Power-Beyond (LS)

• Oil delivery capacity for G-1 F125 Kombi: optimal starting at 105 l/min

• Oil delivery capacity G-1 F125: optimal starting at 65 l/min

• Operating pressure: 200 bar

• 12-volt signal from the reverse gear

• 12-volt signal from the brake light

• 12-volt power supply

• Yoke / ball-type hitch (K80)


Tires 650/40-R22.5 Vredestein Flotation Trac (extra charge added to standard tires)

Width altered to 3,150 mm | without EU type-approval

Tires 710/35-R22.5 Nokian Country King (extra charge added to standard tires)


Swiveling touch wheels (extra charge added to basic model “Touch wheels with pneumatic tires”)

Dual binding unit

The bale is wrapped simultaneously in two nets or wide films.

This cuts the binding time for the bale in half.





Drive axle, complete

Hydraulic drive uphill, automatic braking function downhill, ABS system

Automatic regulation, parameters can be set on the terminal

Film pre-stretcher combined

For film widths between 500 mm and 750 mm; the overlap can be adjusted as well

Additional bale turn

When the wrapping process is complete, the bale will keep turning to allow the film

to make better contact

Bale drop mat

For a gentle bale drop onto the field

Bale tipper

When the wrapping process is complete, the bale is positioned on its right front side

with the direction of travel

Bale stopper for bale tipper

For safely tipping bales, even on slopes. Only in conjunction with bale tipper and ISOBUS

Bale catcher

For safely depositing bales on slopes. Only in conjunction with ISOBUS


Dosistar control unit, pump with filter, electronic flow meter,

various nozzles, 100 l tank

Cleaning kit with air pressure

Consisting of compressed air hose and air gun, used for cleaning the round baler –

only in combination with air brake system!





Drawbar eye types: A, C, D, F (for an overview, see page 104) – please specify when placing

your order!



Extra charge added to basic model

Rotating light (height – single & dual binding unit: 3,015 mm)

Freight costs net


14 Training net

15

G5050 KOMBI


BASIC MODEL (without round baler) - WITH EU type-approval

Load sensing

Can also be operated in conjunction with tractors without load sensing pump

Twin wrapping arm

Hydraulically actuated wrapping table

Additional roller for wrapping table

4 bale conveyor belts including belt guide and 4 bale guide rollers

Bale deposit backwards

Film pre-stretcher 750 mm

Film cutter basic

Film monitoring unit

Single-film mode

Hydraulically lowerable film storage for up to 10 rolls of film

Height-adjustable drawbar for high and low hitch

Tandem axle chassis with tires 560/45-R22.5 Flotation Trac


Weight 5,400 – 7,700 kg Bale diameter 0.90 – 1.50 m

Total length 7,840 mm When bales are loaded through without wrapping process (hay, straw) up to 2.00 m

Total width 2,990 mm Oil requirement starting at 60 l/min at 190 bar

Total height 2,800 – 3,350 mm Bale weight up to 1,800 kg


Tires 650/40-R22.5 Vredestein Flotation Trac (extra charge added to standard tires)


Tires 710/35-R22.5 Nokian Country King (extra charge added to standard tires)








Extra bale rotation



Bale drop mat: for a gentle bale drop onto the field

Bale tipper

When the wrapping process is complete, the bale is positioned on its right front side with

the direction of travel

Drawbar – long version: 200 mm longer than standard drawbar

PTO shaft may have to be extended

Camera system – Required connection: 12 volt hybrid connector DIN ISO 4165





Drawbar eye types: A, B, C, D, F (for an overview, see page 104) – please specify when

placing your order!

Baler assembly net

At the factory: Baler is provided by the customer (cost of delivering the baler is borne by the

customer)

At the customer's: Installation requires one person and a 5,000 kg crane (baler will be lifted

to a height of approx. 1.5 m during installation)



(extra charge added to basic model)

Rotating light (height plus 200 mm)


Dual-line air brake system

Freight costs net

Attachment parts for round baler AGCO (Fendt & MF) 130F, 160V, 180V

Training net

Paint option of blue or baler color


LED work lights

1 pressure connection and 1 depressurized return for the supply of the wrapper

Fully automatic program control ISOBUS (without terminal)

Load Sensing connection (required for LS mode only)


16


17

LT-MASTER F115

Baler-Wrapper combination for bale diameters of 115 cm

21

LT-MASTER F115


BASIC MODEL - WITH EU type-approval for up to 80 km/h

Twin wrapping arm

Hydraulically driven bale chamber for bale diameters of 115 cm

Dual binding unit for net and film

On-board hydraulic system with oil cooler

Refeed to prevent possible crumbling losses

Integrated Multicrop feeder (working width 3.50 m)



Bale drop towards the front via hydraulic bale delivery ramp

Height-adjustable drawbar

Film pre-stretcher 500 mm and 750 mm combined with overlap adjustment

Film cutter basic


Single-film mode

Tandem axle chassis with suspension and tires 385/55 R22.5


LED work lights


Variable bale size (only for film binding)

infinitely variable bale size from 0.60 – 1.15 m

Camera system

The four cameras are positioned such that they afford you a clear view of the top of

the bale chamber, the sloping conveyor, the wrapping table and the rear of the machine (on the

right in direction of travel) at all times.

Water injection for bale chamber

Consists of solenoid valve, tubing, and adjustable nozzles. For mixing water into dry materials

Radio hand-held transmitter for bale deposit

Automatic central lubrication system for oil and grease

Fully automatic program control PROFI with terminal PROFI plus L

The execution of all work cycles is fully automatic

490 - 1200


Weight

14,800 kg

Length

11,850 mm

Width

2,550 mm

Height

4,000 mm

Bale diameter

from 0.60 to 1.15 m

TRANSPORT POSITION

3251 1093 1472

6450

11850

4000

30°

30°

POWER REQUIREMENT OF THE TOWING VEHICLE

Oil requirement pivoting drawbar

Power requirement

14170

3940

10 l at 200 bar

at least 90 kW

WORK POSITION

3700

3500

2550 6130

22


1 double-acting and 1 single-acting control device for the pivoting drawbar


The electrical power supply for the machine is provided through the ISOBUS socket or the supplied wiring harness

23

LT-MASTER F115



Electric drive

Consists of a 90 kW electric motor with soft starter. Complete with switch cabinet, wiring,

base with forklift slings, emergency switch and main switch

Required connection for electric motor: 400 V / 50 Hz, CEE 125 A, protection class IP55

Weighing system, non-calibrated

Consists of weighing table, display and label printer with GÖWEIL logo or customer logo

Price only valid when purchased together with LT-Master

Weighing system, calibrated


Bale delivery ramp with bale tipper

The bale can be set down gently on the face side (left or right), or forward


Dosistar control unit, pump with filter, electronic flow meter, various nozzles,

suction hose for external container.

Attention! Tank not included

Silage additive tank

450 liter stainless steel tank mounted on the machine

Voltage converter ABS

12V to 24V

24V Lighting

Consists of 15-pin to 13-pin and 2x 7-pin to 13-pin Spiral Cables

Drawbar eye types: A, B, C, D, E, G (for an overview, see page 104)

Please specify when ordering!



Terminal PROFI plus L

Electric drive

Silage additive dosage and Silage additive tank


Dual-line hydraulic brake system - with emergency brake valve and accumulator -

WITHOUT EU type-approval

no extra charge

15

13

Rotating light

Spiral Cable - Semi-truck 24V 15-pin to 13-pin 12V

Freight costs net

Training net

7

ATTENTION!

All prices referring to baler-wrapper combination LT-Master are quoted as net prices!

13

Spiral Cable - Semi-truck 24V 2x 7-pin to 13-pin 12V

7

24

25

LT-MASTER F60

Baler-Wrapper combination for bale diameters of 60 cm

26 27

LT-MASTER F60



Hydraulically powered bale chamber for bale diameters of 0.6 m

Film and net binding


Refeed belt to prevent possible loss of material

Bunker with 3.5 m³ volume

Hydraulically tilting wrapping table

2 bale conveyor belts with belt guide and 2 bale guide rollers

Mechanical bale delivery ramp for bale deposit towards the rear

PTO drive shaft (without hydraulic oil)

Including gearbox with pump, return filter and 90 l hydraulic oil tank

Lower linkage link drawbar for Cat. I and II

Film pre-stretcher 250/375 mm combined with overlap adjustment

Film cutter linear

Film monitoring

Single-film mode

Hydraulically adjustable lift axle and Tires 380/55-R17 AW

Film storage for up to 14 rolls of film

LED work lights

Hand-held transmitter with remote control for bale deposit

Fully automatic central lubrication system for oil

Fully automatic program control PROFI with PROFI plus L handset

All work cycles are fully automatic

TECHNICAL DATA Transport position Work position

Weight

TRACTOR POWER REQUIREMENTS

Oil requirement (lift axle)

Power requirements

3,730 kg

Length 7,570 mm 8,340 mm

Width 2,200 mm 3,110 mm

Height 2,925 mm 2,570 mm

Round bale diameter

0.60 x 0.60 m

10 l at 200 bar

At least: 44 kW (60 hp) - optimum: 60 kW (80 hp)


Cardan shaft connection: Speed: 540 -1000 | 1 3/8“ Z6

1 double-acting control device for controlling the lift axle

Power is supplied to the machine via the ISOBUS socket or the cable harness supplied

A 7-pin socket for the entire lighting system, except work lights


Fully automatic central lubrication system for grease

Camera system

The two cameras are positioned so that the press chamber and the bunker can be viewed

from above.

RBG 60 (see Bale Transport Devices)


Freight costs net

Training net

ATTENTION!

All prices referring to baler-wrapper combination LT-Master are quoted as net prices!

28 29

VARIO-MASTER V140

Baler-Wrapper combination with variable bale chamber

for bale diameters between 80 - 140 cm in steps of 5 cm

31

VARIO-MASTER V140



Twin wrapping arm

Hydraulically driven variable bale chamber for bale diameters between 80 - 140 cm

Dual binding unit for net and film


Two belts for a high compression of the material

Refeed to prevent possible crumbling losses

Integrated Multicrop feeder (working width 3.50 m)



Bale drop towards the front via hydraulic bale delivery ramp

Height-adjustable drawbar

Film pre-stretcher 500 mm and 750 mm combined with overlap adjustment

Film cutter basic


Single-film mode

Tandem axle chassis with suspension and tires 385/55 R22.5


LED work lights


Camera system

The four cameras are positioned such that they afford you a clear view of the top of

the bale chamber, the sloping conveyor, the wrapping table and the rear of the machine (on the

right in direction of travel) at all times.

Water injection for bale chamber

Consists of solenoid valve, tubing, and adjustable nozzles. For mixing water into dry materials

Radio hand-held transmitter for bale deposit

Automatic central lubrication system for oil and grease

Fully automatic program control PROFI with Terminal PROFI plus L


490 - 1200


Weight

15,800 kg

Length

11,780 mm

Width

2,550 mm

Height

4,000 mm

Bale diameter

from 0.80 to 1.40 m

TRANSPORT POSITION

3251 1093 1472

6450

11850

4000

4375

Oil requirement pivoting drawbar

Power requirement

14170

2550 6130

30°

30°

POWER REQUIREMENT OF THE TOWING VEHICLE

10 l at 200 bar

at least 90 kW

WORK POSITION

3700

3500


1 double-acting and 1 single-acting control device for the pivoting drawbar


The electrical power supply for the machine is provided through the ISOBUS socket or the supplied wiring harness

32 33

VARIO-MASTER V140



Electric drive

Consists of a 90 kW electric motor with soft starter. Complete with switch cabinet, wiring,

base with forklift slings, emergency switch and main switch


Weighing system, non-calibrated


Price only valid when purchased together with LT-Master

Weighing system, calibrated



The bale can be set down gently on the face side (left or right), or forward


Dosistar control unit, pump with filter, electronic flow meter, various nozzles,

suction hose for external container.

Attention! Tank not included

Silage additive tank

450 liter stainless steel tank mounted on the machine

Voltage converter ABS

12V to 24V

24V Lighting

Consists of 15-pin to 13-pin and 2x 7-pin to 13-pin Spiral Cables

Drawbar eye types: A, B, C, D, E, G (for an overview, see page 104)

Please specify when ordering!



Terminal PROFI plus L

Electric drive

Silage additive dosage and Silage additive tank


Dual-line hydraulic brake system - with emergency brake valve and accumulator -

WITHOUT EU type-approval

no extra charge

15

13

Rotating light

Freight costs net

Spiral Cable - Semi-truck 24V 15-pin to 13-pin 12V

Training net

7

ATTENTION!

All prices referring to baler-wrapper combination VARIO-Master are quoted as net prices!

13

Spiral Cable - Semi-truck 24V 2x 7-pin to 13-pin 12V

34 35

7

G1015

ROUND BALE WRAPPER



Weight

Length

985 kg

2,220 mm

Program control STANDARD


Stops the wrapping process if film tears or runs out

Connections for hydraulic upper linkage

The hydraulic upper linkage is controlled directly using the program control

of the wrapper

Support roller

Length changes to: 2,370 mm / height changes to: 2,505 mm

Bale tipper

Operation via program control

Counterweight

Approx. 60 kg

Battery supply cable 5.3 meters 2 x 6 mm² with 3-pin power socket

LED Light and indicator system


Including gearbox with hydraulic pump, slip-on tractor PTO drive shaft, return filter

and 30l hydraulic oil tank

Width

1,800 mm

Height

2,355 mm

Roller opening width

Bale diameter

Oil requirement

1,750 mm

0.90 – 1.60 m

starting at 20 l/min at max. 190 bar

1750 mm

Possible attachments (without installation):

Euro-attachment

Bale weight

BASIC MODEL

Load sensing

Can also be operated in conjunction with tractors without load sensing pump

Single wrapping arm

Cat. II and Cat. III three-point linkage

Hydraulically swiveling roller arms for picking up and depositing the bales

up to 1,200 kg

Merlo, Dieci Dedalus, Weidemann hydr., Kramer, Schäffer small, Faucheux, Giant

Merlo ZM3, SMS, MX, Dieci/New Holland, JCB Compact Tool Carrier, Schäffer big, Claas Scorpion,

Zettelmeyer 402, Zettelmeyer 602, Faresin, CAT TH 407 C, Skid Steer, Liebherr L514

Manitou, JCB Q-Fit, Atlas, CAT 907H / Liebherr L507, Fendt Cargo T955/Sennebogen, Volvo BM

Bobcat

Other attachments -

Overview of attachments with dimensions - see page 106

2 bale guide rollers


Film cutter basic

Storage for 1 roll of film

LED work lights

Program control STANDARD with radio remote control

Bale pick-up and deposit are controlled using the electronic joystick. The cycles “wrapping

process” and “film cutting” start automatically.


Freight costs net

Training net


1 pressure connection and one depressurized return for the supply of the wrapper

Load Sensing connection (required for LS mode only)

3-pin socket for electrical supply with direct supply to the battery (12V/30A) - wire cross section 2x6 mm²

38 39

G2020

ROUND BALE WRAPPER




Additional bale guide roller (each) – maximum 2 items


Including gearbox with pump, return filter and 30 L hydraulic oil tank

Wide-angle cardan shaft (one-sided)


Drawbar eye option: B (overview on page 97)



BASIC MODEL

Single wrapping arm



Bale pick-up and bale deposit backwards


Film cutter basic

Storage for 4 rolls of film

Trailer drawbar (height-adjustable)

Tires 380/55-17AW


LED work lights


Bale pick-up and deposit are controlled using the electronic joystick. The cycles “wrapping

process” and “film cutting” start automatically.


Weight 1,150 kg *Bale diameter 0.90 – 1.50 m with standard wrapping arm

Length 3,885 mm *Bale diameter 0.90 – 1.35 m (height altered to 2,760 mm)

Width 2,440 mm Oil requirement starting at 20 l/min at max. 190 bar

Height 3,010 mm Bale weight up to 1,400 kg

*Please specify when ordering!


Freight costs net

Training net


1 pressure connection and one depressurized return for the supply of the wrapper (not applicable for PTO drive shaft)



40 41

G3010

ROUND BALE WRAPPER


Weight 865 kg Bale diameter 0.90 – 1.60 m

Length 2,705 mm Oil requirement starting at 20 l/min at max. 190 bar

Width 1,720 mm Bale weight up to 1,800 kg

Height

BASIC MODEL

Single wrapping arm



Bale deposit to the left and the right


Film cutter basic

Three-point linkage Cat. II

2,670 mm

LED work lights


The cycles “wrapping process” and “film cutting” start automatically,

while “bale drop” starts at the push of a button


Fully automatic PROFI program control

The execution of all work cycles is fully automatic.

Extra charge for Standard control

Radio remote control

Only in combination with fully automatic program control PROFI

Required connection: 3-pin socket for electrical supply of the hand-held terminal (12V/10A)

Bale pick-up

Bale pick-up on the right with or against the direction of travel

Bale deposit on the left (on the right, only possible in bale pick up)


Bale weight: up to 1,100kg


Stops the wrapping process if film tears or runs out.


LED Light and indicator system – Required connection: 7-pin socket for the entire lighting

system (except work lights)

Electric drive (without hydraulic oil) – tractor operation still possible

4 kW electric motor, return filter and 30 l hydraulic oil tank, fully assembled



Including gearbox with hydraulic pump, slip-on tractor PTO drive shaft, return filter and

30l hydraulic oil tank

1-cylinder Honda gasoline engine (without hydraulic oil) – tractor operation still possible

8.2 kW gasoline engine with battery, electric starter, return filter and 30 l hydraulic oil tank



1 pressure connection and 1 depressurized return for the supply of the wrapper (not applicable for PTO drive shaft)



Freight costs net

Training net

42 43

G3010 FARMER

ROUND BALE WRAPPER


Tires 380/55-17 AW





10 L spare fuel can including bracket

Lower linkage link

Drawbar eye types: I, J, K, L (for an overview, see page 104) – Please specify when placing

your order!



BASIC MODEL (without hydraulic oil) - WITH EU type-approval

Single wrapping arm



Bale deposit on the left and the right


Film cutter basic

Hydraulically adjustable lift axle

Removable, hydraulic articulated drawbar


Tires 300/80-15.3 AW

1-cylinder Honda gasoline engine (without hydraulic oil)



LED work lights


The cycles “wrapping process” and “film cutting” start automatically, while “bale drop” starts at the push

of a button


Weight 1,450 kg Bale diameter 0.90 – 1.60 m

Length 5,260 mm Oil requirement Self-sufficient oil supply


Height

2,990 mm with the lift axle extended



without EU type-approval

Hydraulic brake without accumulator and breakaway quick-closing device


Rotating light

Freight costs net

Training net



44 45

G3010 PROFI

ROUND BALE WRAPPER

Program control PROFI


Weight 1,670 kg Bale diameter 0.90 – 1.60 m

Length 5,610 mm Oil requirement Self-sufficient oil supply


Height

3,030 mm with the lift axle extended


Tires 520/50-R17 FLT

Width altered to 2,545 mm, height altered to 3,090 mm (with lift axle extended)




Diesel engine speed control

Automatically switches to idle speed after the wrapping process or extended intervals

Axle suspension

Lower linkage link



your order!



Single wrapping arm



Bale deposit on the left and the right


Film cutter basic




Tires 380/55-17 AW

3-cylinder diesel engine Kubota (without hydraulic oil): 17.5 kW diesel engine, water cooled,

battery, electric starter, hours counter, return filter and 44 l hydraulic oil tank


LED work lights

Fully automatic program control PROFI with radio remote control







Rotating light

Freight costs net

Training net



3-pin socket for electrical supply of the hand-held terminal (12V / 10A)

46 47

G5010

ROUND BALE WRAPPER



Single wrapping arm



Bale pick-up from the front, bale deposit backwards


Film cutter basic


Hydraulically controlled pivoting drawbar with manual control and lower linkage link

Tires 380/55-17 AW


LED work lights


“Bale pick-up” is controlled manually using the electronic joystick. The cycles “wrapping

process” and “film cutting” start automatically, while “bale drop” starts at the

push of a button.



Length 3,940 mm *Bale diameter 0.90 – 1.35 m height altered to 2,785 mm





Tires 480/45-17 AW





Including gearbox with pump, return filter, hydraulic oil tank

and lower linkage link

Cardan shaft


Prevents the bale from dropping off the wrapping table in steep terrain

Bale drop mat (including additional roller)


Bale tipper (including additional roller)












Freight costs net

Training net



1 double-acting control device for controlling the pivoting drawbar



48 49

G5012

ROUND BALE WRAPPER



Twin wrapping arm





Film cutter basic


Hydraulically controlled pivoting drawbar with manual control and lower linkage link

Tires 380/55-17 AW


LED work lights


“Bale pick-up” is controlled manually using the electronic joystick. The cycles “wrapping

process” and “film cutting” start automatically, while “bale drop” starts at the push of a button.








Tires 480/45-17 AW





Including gearbox with pump, return filter, hydraulic oil tank

and lower linkage link

Cardan shaft



Bale drop mat (including additional roller)


Bale tipper (including additional roller)












Freight costs net

Training net



1 double-acting control device for controlling the pivoting drawbar



50 51

G5020

ROUND BALE WRAPPER




Width 2,750 mm Oil requirement starting at 65 l/min with LS hydraulics at max. 190 bar




Load-sensing: can also be operated in conjunction with tractors without load sensing pump

Twin wrapping arm





Film cutter basic

Film monitoring

Single-film mode


Hydraulically controlled pivoting drawbar with lower linkage link

Tires 380/55-17 AW


LED work lights

Fully automatic program control ISOBUS (without terminal)


Tires 480/45-17 AW – width altered to 2,880 mm

PTO drive shaft Load Sensing (without hydraulic oil)

Including gearbox with pump, return filter, hydraulic oil tank and lower linkage link

Cardan shaft

Extra bale rotation





Bale drop mat (including additional roller): For a gentle bale drop onto the field

Bale tipper (including additional roller): When the wrapping process is complete, the bale is

positioned on its right front side with the direction of travel













Freight costs net

Training net



round baler



52 53

G3010 Q

SQUARE BALE WRAPPER


Weight 1,130 kg For all bale dimensions from 0.80 x 0.50 up to 1.20 x 1.40 m

Length 2,705 mm Bale length from 0.80 up to 1.60 m

Width 1,720 mm Round bale diameter 0.90 – 1.50 m

Height 2,760 mm Oil requirement starting at 20 l/min at max. 190 bar

Bale weight round / square

max. 1,800 / 1,000 kg

BASIC MODEL

Single wrapping arm

Hydraulically tilting wrapping table with mechanical belt length adjustment

Wide, continuous bale conveyor belt with belt guide and 2 bale guide rollers


Combined film pre-stretcher 500 mm and 750 mm

Film cutter basic

Feed rate shut-off valve

This ensures that the film will overlap accurately for rectangular bales


LED work lights






Fully automatic program control PROFI


Extra charge for Standard control


Only in combination with fully automatic program control PROFI

Required connection: 3-pin socket for electrical supply of the hand-held terminal

(12 V / 10 A)

Bale pick-up for square and round bales

Bale pick-up on the right against the direction of travel

Bale deposit on the left




Additional bale guide roller

LED Light and indicator system – Required connection: 7-pin socket for the entire lighting

system (except work lights)

Electric drive (without hydraulic oil) – tractor operation still possible

4 kW electric motor, return filter and 30 l hydraulic oil tank, fully assembled



Including gearbox with hydraulic pump, slip-on tractor PTO drive shaft, return filter and 30 l

hydraulic oil tank

1-cylinder Honda gasoline engine (without hydraulic oil) – tractor operation still possible




1 pressure connection and one depressurized return for the supply of the wrapper (not applicable for PTO drive shaft)



Freight costs net

Training net

56 57

G3010 Q FARMER

SQUARE BALE WRAPPER


Weight 1,670 kg For all bale dimensions up to 1.20 x 1.40 m

Length 5,260 mm Bale length up to 1.60 m


Height 3,140 mm with the lift axle extended Oil requirement self-sufficient oil supply


max. 1,800 / 1,000 kg



Single wrapping arm





For film widths between 500 mm and 750 mm; the overlap can be adjusted as well.

Film cutter basic


Tires 380/55-17 AW





10 L spare fuel can including bracket

Lower linkage link


your order!





Tires 300/80-15.3 AW

1-cylinder Honda gasoline engine (without hydraulic oil)








Rotating light

Freight costs net

Training net

LED work lights






58 59

G3010 Q PROFI

SQUARE BALE WRAPPER


Weight 1,850 kg For all bale dimensions up to 1.20 x 1.40 m

Length 5,610 mm Bale length up to 1.60 m


Height 3,180 mm with the lift axle extended Oil requirement self-sufficient oil supply


max. 1,800 / 1,000 kg


Single wrapping arm






Film cutter basic




Tires 380/55-17 AW


battery, electric starter, hours counter, return filter and 44 l hydraulic oil tank




LED work lights






Width altered to 2,545 mm,

Height altered to 3,240 mm (with the lift axle extended)






Axle suspension

Lower linkage link



your order!






Rotating light

Freight costs net

Training net



3-pin socket for electrical supply of the hand-held terminal (12 V / 10 A)


60 61

G4010 Q PROFI

SQUARE BALE WRAPPER


Weight 3,200 kg For all bale dimensions from 0.80 x 0.80 to 1.20 x 1.40 m

Length 6,790 mm Single/double bales from 1.00 up to 2.00 m


Height 3,530 mm – to 3,710 Oil requirement self-sufficient oil supply

depending on position of upper part with the lift axle extended Bale weight round / square max. 1,800 / 1,500 kg


Load-sensing

Twin wrapping arm



Bale deposit to the left with the direction of travel



Film cutter basic


Lower linkage link

Hydraulic support foot

Height-adjustable drawbar with hydraulic support foot for wheel loader operation,

can be controlled via radio remote control


Tires 380/55-17 AW

3-cylinder diesel engine Kubota (without hydraulic oil): 17.5 kW diesel engine, water cooled, battery,

electric starter, hours counter, pressure & return filter and 44 l hydraulic oil tank




2 LED work lights






Width altered to 2,545 mm, height altered to 3,590 – 3,770 mm depending on position

of upper part, with lift axle extended

Film monitoring unit with single-film mode:


Automatically switches to “single-film mode” as soon as one roll

runs out. During this process the feed rate is reduced to ensure an overlap of 50 %.



Bale drop mat

Hydraulically lowerable rubber mat that can be controlled via radio remote control

Axle suspension


Drawbar eye types: A, B, C, D, G (for an overview, see page 104) – Please specify

when placing your order!





40 km/h design in accordance with road traffic regulations

Special permit only in conjunction with dual-line air brake system

Rotating light

Freight costs net

Training net



3-pin socket for electrical supply of the hand-held terminal (12 V / 10 A)


62 63

G4020 Q PROFI

SQUARE BALE WRAPPER


Weight 3,680 kg For all bale dimensions from 0.80 x 0.80 to 1.20 x 1.40 m

Length 6,410 mm Single / double bales from 1.00 up to 2.00 m


Height 3,710 mm with the lift axle extended Oil requirement starting at 80 l/min at max. 190 bar


Load-sensing: can also be operated in conjunction with tractors without load sensing pump

Twin wrapping arm



Bale pick-up for square and round bales

Bale pick-up on the right hand side with the direction of travel

Bale deposit to the left



Film cutter basic




max. 1,800 / 1,500 kg



Width altered to 2,545 mm, height altered to 3,770 mm


Required connection: 3-pin socket for electrical supply of the hand-held terminal 12 V / 10 A)

Hydraulic support foot

Height-adjustable drawbar with hydraulic support foot for wheel loader operation.

Can be controlled via radio remote control – no PTO drive shaft possible

Only in conjunction with 3-cylinder diesel engine Kubota

Film monitoring unit with single-film mode:


Automatically switches to “single-film mode” as soon as one roll

runs out. During this process the feed rate is reduced to ensure an overlap of 50 %.


Including gearbox with pump, return filter and 60 l hydraulic oil tank

Not combinable with 3-cylinder diesel engine Kubota

Cardan shaft


battery, electric starter, hours counter, return filter and 44 l hydraulic oil tank.

Tractor operation still possible


Switches automatically to idle speed after the wrapping process or extended intervals –

Only in conjunction with 3-cylinder diesel engine Kubota

Axle suspension


Drawbar eye types: A, B, C, D, G (for an overview, see page 104) – Please specify when

placing your order! Only in conjunction with additional equipment “hydraulic support foot”





40 km/h design in accordance with road traffic regulations

Special permit only in conjunction with dual-line air brake system

Rotating light


Lower linkage link drawbar

Freight costs net

Storage for up to 16 rolls of film

Training net

Tires 380/55-17 AW


Feed rate shut-off valve – This ensures that the film will overlap accurately for rectangular bales



Load sensing connection (for LS operation) – (not applicable for PTO drive shaft)

2 LED work lights





64 65

G1010

PALLET WRAPPER



Required connection: 3-pin socket for electrical supply of the hand-held terminal

(12 V / 10 A)

Fork tines - Length: 2,200 mm

Extra charge added to fork tines 1,400 mm (basic model)

Telescopic forks: 1.300mm long with 950 mm extension

Extra charge added to fork tines 1,400 mm (basic model)


Camera system

For a better overview in the area of the fork tines and Film cutter basic

Required connection: 12 volt hybrid connector DIN ISO 4165


Weight 760 kg Maximum pallet size 1,350 x 1,350 mm

Length 2,000 mm Maximum pallet height 1,700 mm

Width 1,400 mm Oil requirement starting at 25 l/min. at max. 190 bar

Height 2,240 mm Pallet weight up to 2,000 kg

BASIC MODEL (without attachment)

Load sensing

can also be operated in conjunction with tractors without load sensing pump

Single wrapping arm

Hydraulically folding film cutter linear





Hydraulically actuated film pre-stretcher

Height adjustment: 600 mm

Standardized fork tine mount: ISO 3B

Fork tines - Length: 1,400 mm

LED work lights


All work steps can be performed manually and in fully automatic fashion


Splash guard

Especially for operation with wheel loader or telescopic loader


Euro-attachment

Merlo, Weidemann hydr., Kramer, Schäffer small, Faucheux, Giant

SMS, MX, Dieci/New Holland, JCB Compact Tool Carrier, Schäffer big,

Claas Scorpion, Zettelmeyer 602, CAT 907H / Liebherr L507, Liebherr L514, Skid Steer,

Merlo ZM3, Faresin, CAT TH 407 C

JCB Q-Fit, Atlas, Volvo BM, Fendt Cargo T955/Sennebogen, Forklift-attachment ISO II, Manitou,

Cat. II and Cat. III three-point linkage

Amkodor, Bobcat

Other attachments -



Freight costs net

Training net


1 pressure connection and 1 depressurized return for the supply of the wrapper

Load Sensing connection (for LS mode)


68 69


TDE – Bale Transport Spike Single

For transporting unwrapped round bales.

Base frame with Cat. I and II three-point linkage

Euro-attachment

Reinforced tines | Ø: 42 mm, length: 1100 mm

Tine protection for road transport

Weight: 75 kg

Bale weight: max. 1,500 kg

Support foot (Fig. 1)


Adapter Weiste triangle Cat. II

Other attachments -


Freight costs net

Fig. 1

BTGME – Round Bale Transport Fork

mechanical

For transporting wrapped or unwrapped round bales.


Large fork pipes / Ø: 110 mm

Quick-release fastener for width adjustmentFor bale

diameters of 1.00 – 1.80 m

Weight: 90 kg


Hydraulic width adjustment (Fig. 1)

Double-acting hydraulic control device required

Kit for conversion to bale transport spike double (Fig. 2)

For transporting two unwrapped round bales (max. bale

diameter 1.60 m) or square bales at the same time / reinforced

tines (Ø: 42 mm, length 1,100 mm)

Payload: max. 1,500 kg



Other attachments -


Freight costs net

Fig. 1 Fig. 2

TDD – Bale Transport Spike Double

For transporting two unwrapped round bales (max. bale

diameter 1.60 m) or square bales at the same time


Euro-attachment

Reinforced tines | Ø: 42 mm, length: 1100 mm

Tine protection for road transport

Weight: 134 kg

Payload: max. 2,500 kg

Support foot (Fig. 1)

Square bale attachment (Fig. 2)



Other attachments -


Freight costs net

Fig. 2

Fig. 2

72 73


BTGHA – Round Bale Transport Fork

For transporting and tipping wrapped or unwrapped

round bales


Large fork pipes / Ø: 110 mm

Mechanically adjustable fork pipes with quick-release

fastener

Two hydraulic cylinders for unlocking the fork pipes

For bale diameters of 1.00 – 1.80 m

Max. operating pressure: 200 bar

Weight: 136 kg


Single-acting hydraulic control device required

Hydraulic width adjustment




Other attachments -


Freight costs net

DTR – Double Transport Frame

For attaching two BTGME or BTGHA round bale transport

forks in order to transport two bales at once with a

diameter of up to 1.60 m.

Base frame with Cat. II three-point linkage

Hydraulically movable transport carriage

WITHOUT BTGME/BTGHA bale transport forks


Weight (without transport fork): 218 kg





Other attachments -


Freight costs net

BTGHY – Round Bale Transport Fork

hydraulic

For transporting and stacking round bales


Ball bearing mounted, rotatable fork pipes

Hydraulic cylinder for width adjustment

Support foot

For bale diameters of 0.90 – 1.80 m


Weight: 245 kg



Pressure relief valve including check valve

(telescopic / wheel loaders require an operating pressure

greater than 200 bar)

Kit for conversion to bale transport spike

Tine design same as for bale transport spike single


Euro-attachment

Hauer B, Merlo, Dieci Dedalus, Weidemann hydr., Kramer,

Schäffer small, Faucheux, Giant

SMS, MX, Dieci/New Holland, JCB Compact Tool Carrier,

Schäffer big, Claas Scorpion, Hydrema, Zettelmeyer 402,

CAT TH 407 C, Skid Steer, Merlo ZM3


Manitou, JCB Q-Fit, Atlas, Volvo BM, CAT 907H / Liebherr

L507, Fendt Cargo T955/Sennebogen, Forklift-attachment

ISO II

Amkodor, Bobcat

Other attachments -


Freight costs net

74 75


Small bale adapter

RBG 60

76

RBG 160 – Round Bale Grabber

For loading and stacking bales of any kind

(silage, hay, and straw)

Base frame with large, rounded gripper arms with swivel

compensator

Hydraulic cylinder for bale securing

Bale diameters of 1.10 – 1.60 m


Weight: 202 kg / Bale weight: max. 1,800 kg

Small bale adapter

For transporting smaller bales (Ø of 0.90 – 1.40 m)


RBG option for bale diameters of 0.80 – 1.40 m


Weight: 199 kg / Bale weight: max. 1,800 kg

Small bale adapter

For transporting smaller bales (Ø of 0.70 – 1.20 m)


RBG option for one or two bales with a bale diameters of

0.60 m (LT-Master F60)


Weight: 140 kg / Bale weight: max. 500 kg

Double-acting hydraulic control device for all RBG options required


(telescopic & wheel loaders require an operating pressure



Euro-attachment

Cat. I and Cat. II three-point linkage


Schäffer small, Avant, Faucheux, Giant

Merlo ZM3, SMS, MX, Dieci/New Holland, JCB Compact Tool

Carrier, Schäffer big, Claas Scorpion, Zettelmeyer 402,

Zettelmeyer 602, Liebherr L514, Faresin, CAT TH 407 C,

Skid Steer


Requires three-point linkage


L507, Fendt Cargo T955/Sennebogen

Amkodor, Bobcat

Other attachments -


Freight costs net

BTGQU – Square Bale Grabber

For transporting / stacking round & square bales

For square bales of up to 2.10 m and round bales of up

to 2.00 m

Base frame with large, rounded gripper arms

Hydraulic cylinder for bale securing

Low-maintenance gripper arm guides

Pressure relief valve incl. check valve

Weight: 381 kg




Euro-attachment



Schäffer small, Avant, Faucheux, Giant

Merlo ZM3, SMS, MX, Dieci/New Holland, JCB Compact

Tool Carrier, Schäffer big, Claas Scorpion, Zettelmeyer

402, Zettelmeyer 602, Liebherr L514, Faresin,

CAT TH 407 C, Skid Steer


Requires three-point linkage


L507, Fendt Cargo T955/Sennebogen, Forklift-attachment

ISO II

Amkodor, Bobcat

Other attachments -


Freight costs net

NEW: with bolted attachments!

77


GFM – Film Storage

For transporting 16 rolls of film or 14 rolls of film

and two rolls of net / wide film


Hydraulic cylinder for lowering the film storage

Weight: 250 kg


Lighting kit

4 LED work lights and 2 marker lights

can be controlled via hand-held transmitter


Euro-attachment

Dieci Dedalus, Kramer, Schäffer small, Faucheux,

Weidemann hydr., Giant

Merlo ZM3, Dieci/New Holland, Schäffer big, Zettelmeyer

602, Liebherr L514, Faresin, CAT TH 407 C, Skid Steer,

SMS, Claas Scorpion


CAT 907H/Liebherr L507, JCB Q-Fit, Manitou, Fendt Cargo

T955/Sennebogen

Bobcat

Other attachments -


Freight costs net

78


RBS – Round Bale Slicer

For cutting and transporting bales of any kind (silage,

hay, and straw), 5 reinforced tines (Ø: 42 mm, length:

1,000 mm), scraper bar of HARDOX 500, Double-acting

hydraulic control device required

Max. opening area: 1,520 mm


Max. operating pressure: 200 bar, weight: 440 kg



(telescopic / wheel loaders require an operating pressure


Film holder for RBS

Film / net are separated from the bale without

the need to climb down from the tractor

Fixes the net and the film in place across the

entire width by means of 8 hooks – machines

made in 2002 or later can be retrofitted with

the film holder, weight: 52 kg

Two additional tines


Euro-attachment

Hauer B, Merlo, Dieci Dedalus, Weidemann hydr.,

Kramer, Schäffer small, Faucheux, Giant

Merlo ZM3, SMS, MX, Dieci/New Holland, JCB Compact

Tool Carrier, Schäffer big, Claas Scorpion, Zettelmeyer

602, CAT TH 407 C, Skid Steer


Manitou, JCB Q-Fit, Volvo BM, CAT 907H / Liebherr L507,

Atlas

Amkodor, Bobcat

Other attachments -


Freight costs net

RBA – Round Bale Unroller

BASIC MODEL

Basic device without three-point linkage

Scraper floor with curved path-controlled pick-up

SHORTENED VERSION // The width is reduced by 300 mm

BASIC MODEL

Basic device without three-point linkage

Scraper floor with curved path-controlled pick-up


Weight

520 kg

Length

1,600 mm

Width

2,100 mm

Height

1,100 mm

Bale weight

TECHNICAL DATA // DEVICE WITH LOADING

ARM AND STACKER COLLET

Weight

Length

Width

Height

760 kg

1,800 mm

2,230 mm

1,477 mm

up to 1,000 kg


1 pressure connection and 1 depressurized return

80 81


RBA

Figure 1 – Cat. II three-point linkage with stacker collet

Figure 3 – Spreader attachment

Figure 2 – Hydraulic loading arm

Figure 4 – Electric drive


Cat. II three-point linkage with stacker collet (Fig. 1)

Hydraulic loading arm (Fig. 2)

With 2 load cylinders and 1 telescopic cylinder (loading arm can be reattached on the opposite

side with a few hand movements). Double-acting hydraulic control device required.

Spreader attachment (Fig. 3)

Fixture for evenly spreading straw

Hydraulic swivel device for spreader attachment

Quantity control valve for spreader attachment

Only in combination with quantity control valve RBA

Quantity control valve RBA

For adjusting the speed of the scraper floor and of the pick-up

Electric drive (Fig. 4)

Composed of 4 kW electric motor with hydraulic pump, return filter and hydraulic oil tank as

well as control device for scraper floor

Chassis height-adjustable including drawbar (Fig. 5)

Drawbar combined with drawbar eye D40 and tractor linkage drawbar;

Mechanical support for bale pick-up

Double-acting hydraulic control device required.

Chassis height-adjustable including swivel wheels (Fig. 6)

Double steering wheels (for operation in conjunction with smaller tractors),

only in conjunction with three-point linkage, top link bolt must be attached with

a chain, not suitable for articulated steering tractors!

Double-acting hydraulic control device required.

Feed chute

Hand control slide valve 2 functions



Radio remote control 2 sections

Solenoid valve, radio remote control for the load arm and scraper floor functions.

Figure 5 – Chassis with drawbar

Figure 6 – Chassis with swivel wheels

Radio remote control with joystick, 3 sections

Solenoid valve, radio remote control for the load arm, chassis, and scraper floor functions.

1 pressure connection and 1 depressurized return required


Adapter Weiste triangle Cat. II – Only in combination with three-point attachment

Other attachments -



Freight costs net

82 83


RADIO REMOTE CONTROL


2 sections

Radio remote control with joystick

3 sections


• The control unit is mounted on the basic device.

• Only the operating unit with radio control is in the tractor

No longer the control together with device hoses

• For operation with a wheel loader or telescopic loader,

a single-acting control unit with free return, as well as

a 12-volt connection are required

• With the radio remote control you can also operate

the round bale pulper outside of the tractor

(e.g. when removing film and net)

• Can be retrofitted on existing round bale pulpers

HAND CONTROL SLIDE VALVE

Control device on the round bale pulper

For operation from the tractor cab

Depending on equipment 2, 3, and 4 times

1 x notch for scraper floor

84

HIGH LIFT BUCKETS

GHU 06 MINI


Swivel device

Straightforward installation, can be fitted and removed with

ease and without the use of tools, increases the height of the front

panel by 310 mm, can still be used as a bucket extension


Adapter Weiste triangle Cat. 0 Communal

Other attachments -



Freight costs net

BASIC MODEL

From 8 – 20 kW (~ 10 – 25 HP) // payload up to 700 kg

Double-acting 2-stage telescopic cylinder, upright in three-point frame

Three-point linkage Cat. 0 / Cat. I

Flat bucket bottom with welded-on scraper bar made from HARDOX 500

Removable swing gate

STANDARD SIZES

Bucket depth: 600 mm I Front / side wall height: 350 mm

Model Bucket width Weight

GHU 06/880 880 mm (outside width 1,000 mm) 119 kg

GHU 06/1200 1,200 mm 131 kg

GHU 06/1400 1,400 mm 139 kg

86 87

HIGH LIFT BUCKETS

GHU 08


Swivel device

Straightforward installation (can be fitted and removed with ease

and without the use of tools), increases the height of the front


Sidewall extension

Consisting of 2 side panels, front panel and one holder

for the swing gate

Additional height of 350 mm

BASIC MODEL

10 – 45 kW (~ 15 – 60 HP) // payload up to 2,400 kg

Single or double-acting 2-stage telescopic cylinder, upright in three-point frame

Three-point linkage Cat. I

Torsion spring for quick lowering into end position including automatic end position

locking in single-acting version



STANDARD SIZES

Bucket depth: 800 mm I Front / side wall height: 600 mm


GHU 08/1200 1,200 mm 236 kg

GHU 08/1400 1,400 mm 247 kg

GHU 08/1550 1,550 mm 255 kg

GHU 08/1700 1,700 mm 263 kg

GHU 08/1850 1,850 mm 271 kg

GHU 08/2000 2,000 mm 279 kg

GHU 08/2200 2,200 mm 291 kg

Hauer B

Additional swing gate

Bucket width: 1,200 mm - 1,850 mm

Bucket width: 2,000 mm, 2,200 mm

Connecting strips

For connecting the additional swing gate with standard

swing gate

Plug stanchions (1 pair)

Height: 500 mm

Simple installation (can be slipped on or removed without

the use of tools)



Euro attachment including Cat. II attachment

Straightforward installation thanks to bolted attachment

three-point attachment remains fully usable

2-stage locking lugs effect an improved tilt angle, allowing

for picking up larger amounts of bulk solids

Weidemann hydr.

Skid Steer

Adapter Weiste triangle Cat. 0 Communal


Hauer B

Other attachments -



Freight costs net

88 89

HIGH LIFT BUCKETS

GHU 10


Swivel device


and without the use of tools), increases the height of the front panel

by 450 mm, can still be used as a bucket extension

Sidewall extension


for the swing gate


BASIC MODEL


Single or double-acting 2-stage telescopic cylinder, upright in three-point frame

Three-point linkage Cat. I and Cat. II

Torsion spring for quick lowering into end position

including automatic end position locking in single-acting version



STANDARD SIZES

Bucket depth: 1,000 mm I Front / side wall height: 600 mm


GHU 10/1400 1,400 mm 315 kg

GHU 10/1700 1,700 mm 333 kg

GHU 10/1850 1,850 mm 342 kg

GHU 10/2000 2,000 mm 384 kg

GHU 10/2200 2,200 mm 398 kg

Hauer B


Bucket width: 1,400 mm, 1,700 mm, 1,850 mm


Connecting strips

For connecting the additional swing gate with standard swing gate


Height: 500 mm


the use of tools)


Euro attachment





Weidemann hydr.

Skid Steer

Kramer

Weiste triangle Cat. II

Hauer B

Other attachments -



Freight costs net

90 91

HIGH LIFT BUCKETS

GHU 12


Swivel device




Sidewall extension


for the swing gate


BASIC MODEL

Starting at 60 kW (~ 80 HP) // payload up to 5,000 kg


Three-point linkage Cat. II and Cat. III



STANDARD SIZES



GHU 12/2000 2,000 mm 526 kg

GHU 12/2200 2,200 mm 545 kg

GHU 12/2350 2,350 mm 559 kg

GHU 12/2500 2,500 mm 567 kg

Hauer B




Connecting strips



Height: 500 mm


the use of tools)


Euro attachment





Weidemann hydr.

Manitou, Kramer, CAT 907H / Liebherr L507

Liebherr L514


Hauer B

Other attachments -



Freight costs net

92 93

HIGH LIFT BUCKETS

GHK


Swivel device




Sidewall extension


for the swing gate


BASIC MODEL

starting at 75 kW (~ 100 HP) // payload up to 7,000 kg


three-point attachment Cat. II and Cat. III

Flat bucket bottom with bolted scraper bar made from HARDOX 500


STANDARD SIZES



GHK/2200 2,200 mm 644 kg

GHK/2500 2,500 mm 668 kg

Hauer B


Bucket width: 2,200 mm

Bucket width: 2,500 mm

Connecting strips



Height: 500 mm


the use of tools)


Euro attachment





Weidemann hydr.

Manitou, Kramer, CAT 907H / Liebherr L507

Liebherr L514


Hauer B

Other attachments -



Freight costs net

94 95

HIGH LIFT BUCKETS

GHS 10

FOR FORKLIFTS


Swivel device




Sidewall extension


for the swing gate


BASIC MODEL


Double-acting 2-stage telescopic cylinder



Stacker attachment via fork tines


Bucket width: 1,400 mm, 1,700 mm, 1,850 mm


Connecting strips



Height: 500 mm


the use of tools)


Freight costs net

STANDARD SIZES



GHS 10/1400 1,400 mm 275 kg

GHS 10/1700 1,700 mm 293 kg

GHS 10/1850 1,850 mm 302 kg

GHS 10/2000 2,000 mm 344 kg

GHS 10/2200 2,200 mm 358 kg

65 mm

150 mm

NOTICE: The delivery time for GHS is up to 8 weeks.

96 97

HIGH LIFT BUCKETS

GHS 12

FOR FORKLIFTS


Swivel device




Sidewall extension


for the swing gate


BASIC MODEL

starting at 60 kW (~ 80 HP) // payload up to 5,000 kg

Double-acting 3-stage telescopic cylinder



Stacker attachment via fork tines




Connecting strips



Height: 500 mm


the use of tools)

STANDARD SIZES



GHS 12/2000 2,000 mm 461 kg

GHS 12/2200 2,200 mm 480 kg

GHS 12/2350 2,350 mm 494 kg

GHS 12/2500 2,500 mm 503 kg

65 mm

150 mm


Freight costs net

NOTICE: The delivery time for GHS is up to 8 weeks.

98 99

MS 100

BLADE SHARPENER

EXHIBITION STANDS

TECHNICAL DATA (specifications without transport devices, high lift buckets or G1015)

BASIC MODEL (price does not include equipment)

Exhibition stand for 4 attachments (transport devices and high lift buckets)

or 1 attachment (wrapper G1015)

Eyes for transport

Holder for mounting a flagpole with a diameter of 90 mm

Transport devices, high lift buckets

Weight 340 kg 250 kg

Length 2,467 mm 2,250 mm

Width 950 mm 1,480 mm

Height 2,733 mm 1,275 mm

G1015

net price, without discount

BASIC MODEL

Basic model with mobile base frame

Pivotable 1.1 kW electric motor – available with 230 V, 400 V (50 Hz) or 120 V (60 Hz)

Please specify when ordering (plug not included)

Special cup with coarse grain size

TECHNICAL DATA

L x W x H

Weight

930 x 675 x 1.455 mm

69 kg

Exhibition stand for transport devices

Exhibition stand for G1015


Replacement cup wheel

Cup wheel: coarse grain size

Cup wheel: fine grain size, for increased service life

Linear grinding unit

Adapter for sharpening straight blades

Cooling unit

Prevents the blade from heating up while being sharpened


Freight costs net

Exhibition stand for high lift buckets

102 103

DRAWBAR EYE TYPES

TIRES

A K80 drawbar eye

Ball coupling

H USA drawbar eye D33

mm

rigid

Complete wheel 300/80-15.3

10PR/6 hole / ET0 / Diagonal, AW

Complete wheel 380/55-17

B Standard drawbar eye

D40 mm

Acc. to DIN 11026, ISO 5692-2

no extra

charge

I K80 drawbar eye

Variable inclination

10PR/6 hole / ET0 / Diagonal, AW

Complete wheel 480/45-17

10PR/6 hole / ET-35 / Diagonal, AW

C Ring drawbar eye D50

mm

Rotatable (hitch ring)

DIN similar to 9678, ISO

similar to 5692-1

J D40 drawbar eye


according to DIN 11026

ISO 5692-2

no extra

charge

Complete wheel 500/60-R22.5

155D/8 hole/ET+50 BKT/Radial, FL630 Plus

D Ring drawbar eye D50

mm

Rigid (hitch ring)


similar to 20019

E Standard drawbar eye

D50 mm

Truck drawbar eye


similar to 1102

no extra

charge

K D50 drawbar eye

Fixed (hitch ring)


DIN similar to 9678

ISO similar to 20019

L USA drawbar eye


no extra

charge

Complete wheel 520/50-R17

147D/6 hole / ET-35 / Radial, Vredestein Flotation Trac


152D/8 hole / ET0 Radial, Vredestein Flotation Trac


F Standard drawbar eye

D40 mm, moved downward

42 mm thick


similar to 5692-2

F Standard drawbar eye

D40 mm, moved downward

for G-1

42 mm thick


similar to 5692-2

no extra

charge

159D/8 hole / ET0 Radial, Vredestein Flotation Trac


156D/8 hole / ET-35 Radial Vredestein Flotation Trac


161D/8 hole / ET-50 Radial Vredestein Flotation Trac


157D/8 hole / ET-65 Radial, Nokian Country King

G Standard drawbar eye

D40 mm

Truck drawbar eye

30 mm thick


similar to 8755

no extra

charge

104 105

ATTACHMENTS

Volvo BM

Faucheux

Dieci/New Holland

Dieci Dedalus

JCB Q-Fit

Avant

Manitou

CAT 907 H & Liebherr L507

JCB Compact Tool Carrier

Euro-attachment

Hauer B

Hydrema

Kramer

Faresin

SMS

Merlo ZM3

Merlo

Please check whether the attachment is available for your desired product.

106 107

ATTACHMENTS

Adapter Weiste triangle Cat. O Communal


Atlas

MX

Liebherr L514

Amkodor

CAT TH 407 C

Bobcat

Weidemann, hydraulic

Zettelmeyer 602

Schäffer small

Schäffer big

Claas Scorpion

Zettelmeyer 402

Giant

Skid Steer

Please check whether the attachment is available for your desired product.

108 109

110 111

TERMS AND CONDITIONS

NOTES

Excerpt from the Terms and Conditions (available at https://www.goeweil.com/en/terms-and-conditions/

Terms of sale and delivery

• Sale and delivery will only be performed in accordance with the general terms of delivery applicable to agricultural

machinery and vehicles.

• Our liability only applies to the use of original parts and is voided by any modifications or repairs performed on

the delivery item by the purchaser or a third party without our prior written approval.

• Claims can only be accepted if filed within the first 8 days.

• In warranty cases, the manufacturer must be notified in writing before any repairs are made.

Terms of payment – default interest

• As a basic principle, we will only accept such terms of payments as have been granted by us or are specified on the

invoice. Banking default interest plus cost and expenses will be charged from the day of maturity.

• The goods will remain our property until payment has been received in full.

Goods on consignment

• The purchaser is liable for any loss or damage of goods stored by the purchaser as well as for any consequences

resulting from improper storage.

• The manufacturer must be notified immediately in case the goods are sold! Any commissioning or transfer (lending)

is subject to the manufacturer's approval.

Place of performance and jurisdiction

• The place of performance and jurisdiction for the delivery, payment, and all other mutual obligations is A-4020 Linz.

• The legal relationships are governed by the laws of Austria.

112 113

114 115

116 117

118 119

Art. Art. no. no. 86,01238K 86,00315K / UK / ENGLISH


Davidschlag 11, 4202 Kirchschlag // AUSTRIA

+43 (0) 7215 2131-0

office@goeweil.com

www.goeweil.com

Facebook

www.facebook.com/goeweil/

Instragram

www.instagram.com/goeweil/

Google

We look forward to your rating on

Google.

YouTube

www.youtube.com/goeweilcom

EN | Product Range | Goeweil

Verwandeln Sie Ihre PDFs in ePaper und steigern Sie Ihre Umsätze!

EN | Product Range | Goeweil

Verwandeln Sie Ihre PDFs in ePaper und steigern Sie Ihre Umsätze!

Template löschen?

Als Template speichern ?