Redding Wiederlade-Produkte wie Matrizen, Wiederladepressen und Pulverfüller, sowie Kalibertabellen auf einen Blick.
The T-7 combines strength, power and convenience with the speed and versatility of a turret press. Rear casting support assures a rigid turret and precise alignment. “Cast iron construction, powerful compound linkage and a rigid seven station turret make this the best turret press ever!” The T-7 Turret Reloading Press In our effort to create the ultimate turret press our engineering team started with time proven cast iron construction and a turret support second to none. The powerful compound linkage has over 3.8” of ram travel. A 1” diameter ram was chosen with the “smart primer arm” and “spent primer collection system” borrowed from our Ultramag. Another station was added to the turret for greater versatility and an optional “Slide Bar Automatic Primer Feeding System” was designed. Built with the precision you expect from Redding, customers say “this is the best turret press ever.” The Slide Bar Automatic Primer Feeder System also fits the Big Boss Presses. See below for details. ITEM NO. 67000 . . . . . . . $513.70 Available in kit form with shellholder, and your choice of any Series “A” die set. To order, replace XXX with the last three numbers from the Series “A” dies (page 11) ITEM NO. 67XXX . . . $583.75 Spare 7 Station Turret w/bushing ITEM NO. 67002 . . . . . . . $120.25 Features: • Seven station turret head with operating handle • Heavy duty cast iron frame for strength and wear resistance • Powerful compound linkage with positive ram stop. • 1” diameter ram • 4-3/4” press opening • 3-13/16” ram stroke • Ball handle • “Spent primer collection system” Shown with optional “Slide Bar Automatic Primer Feeder System”. • Accepts all standard 7/8"-14 threaded dies and universal shell holders • Shellholders may be rotated to any comfortable position desired • “Smart” primer arm for seating small and large primers • Interchangeable turret heads • Competition die compatible Unique! Turret Stacker A convenient system for storing extra turret heads. Supplied with an assortment of spacers allowing up to three turrets to be stacked with dies installed, thus preserving their adjustment. This system also prevents damage to decapping rods and pins when dies are not in use. ITEM NO. 67950 . . . . . $64.50 Optional Slide Bar Automatic Primer Feeding System Eliminates handling of primers, and speeds up reloading operations. Complete with tubes for both large and small primers. Capacity: approximately 100 primers. Fits the T-7 and Big Boss Presses. ITEM NO. 99600 . . . . . $75.40 Extra Slide Bar Primer Arm Assembly Allows you to quickly change primer cup & pin sizes by simply replacing the slide bar on your Automatic Primer Feeder. Includes slide bar, knob, spring and large & small primer cup assemblies. ITEM NO. 99585 . . . . . $27.80 28
These top of the line single station presses have the largest window opening and longest usable ram stroke of any in their class. The Big Boss II and original Big Boss Reloading Presses Both the original Big Boss and the new Big Boss II reloading presses have all the desirable features of the “Boss” reloading press, but are built on heavier frames with a 1” diameter ram and longer 3.8” usable ram stroke for reloading the largest magnum cartridges. The Big Boss II now features the unique Redding “Spent Primer Collection System” used on the T-7 and Ultramag presses. This top of the line single station press has the largest window opening and longest usable ram stroke of any press in its class. Simply, the only press you will ever need! ITEM NO. 79000 Big Boss . . . . . . . . . . $295.60 (Big Boss Press supplied with “Boss” style primer catcher.) ITEM NO. 97000 Big Boss II . . . . . . . . . $329.50 Both available in kit form with shellholder, and your choice of any Series “A” die set. To order, replace XXX with the last three numbers from the Series “A” dies (page 11) ITEM NO. 79XXX Big Boss . . . . . . . . . . . $365.70 ITEM NO. 97XXX Big Boss II . . . . . . . . . $399.65 ITEM NO. 97601 Big Boss II ram only . . . $58.25 Optional bushing for 1”-14 threaded dies ITEM NO. 70030. . . . . . . . . . . . . . . . . . . $27.80 “Spent Primer Collection System” Spent primers automatically drop through the large diameter hollow ram into a handy flexible plastic tube that can hold hundreds of spent primers before emptying, or be easily routed to your trash container. “Smart Primer Arm” “Smart” primer arm automatically swings into position during the ram stroke and flips out of the way when not in use. For maximum sensitivity at the lowest possible leverage, priming is done at the end of the ram stroke. Extra Smart Primer Arm Assembly Quickly change primer cup & pin size by simply exchanging the entire primer arm assembly. Fits both the T-7 and Big Boss Presses. ITEM NO. 99500 . . . . . $26.25 The Big Boss II – Now featuring the unique Redding “Spent Primer Collection System” used on the T-7 and Ultramag presses. Features: • “Spent primer collection system” • 1” diameter ram • Heavy duty cast iron frame with 36° offset for easy access and visibility • Large 4-1/2" frame opening • 3-13/16" of ram stroke for easy reloading of magnum cartridges • Offset/straight pull ball handle for ease of operation • "Smart" primer arm that moves in and out of position with ram travel • Heavy duty compound linkage • Steel adapter bushing accepts all standard 7/8"-14 threaded dies and is removable for use with oversized dies • Frame with bushing removed accepts 1-1/4" - 12 dies 29