october, november, december 2010 - Greater West Power Tools

TRADE SPECIALS 

$ 185 

SHINANO 

SI-1200B 

¼” MINI RATCHET WRENCH 

SI-1205B 

3/8” MINI RATCHET WRENCH 

Normal price $248 

Now $168.18 + GST 

• Bolt Capacity: 6mm (SI-1200B) 

10mm (SI-1205B) 

• Free Speed: 200rpm (SI-1200B) 

220rpm (SI-1205B) 

• Max Torque: 35Nm/26ft lb (SI-1200B) 

40Nm/30ft lb (SI-1205B) 

$ 172 

SHINANO SI-5500 

10MM PISTOL DRILL 


Now $156.37 + GST 

• Non reversible 

• Free Speed: 2600rpm 

Industrial Air Tools 

OCTOBER, NOVEMBER, DECEMBER 2010 

$ 327 

SHINANO SI-1440T 

½” IMPACT WRENCH 


Now $297.28 + GST 

• Twin Hammer Clutch 

• Max Torque: 850Nm 627ft lb 

• Net Weight: 2.12kg 

KUANI KI-35 

¾” SQ. DR. IMPACT 

WRENCH 


Now $908.18 + GST 

• Twin Hammer Clutch 

• Max Torque: 2033Nm 1500ft lb 


FREIGHT CHARGES MAY APPLY 

$ 999 

$ 361 

TECNA 9335 

TOOL BALANCER 


Now $328.18 

+ GST 

• Capacity: 10-14kg 

• Cable Length: 

2500mm

FREE ALLIANCE DIE GRINDER 

WITH THE PURCHASE OF 

ANY OF THESE 

BURR KITS 

SHINANO SI-2015AD 

STRAIGHT DRILL 


Now $248.18 + GST 

• Non reversible 

• Chuck Size: 10mm 

• Drilling Capacity: 6mm 


SANDING PADS 

$ 175 

CHIEFTAIN BURR KIT 1 

SET OF 12 / 1/8” SHANK BURRS 


Now $159.09 + GST 

$ 273 

$ 380 

SHINANO SI-3101-6 

150MM DUAL ACTION 

PALM GRIP SANDER 


Now $345.46 + GST 


• Orbit Diameter: 5mm 

60726 - 150MM 6 HOLE VINYL FACE SANDING PAD 

Normal price $29.70 Now $20 + GST = $22 

60796 - 150MM 6 HOLE VELCRO FACE SANDING PAD 

Normal price $31.90 Now $20.91 + GST = $23 


Normal price $35.20 Now $23.64 +GST = $26 


Normal price $41.80 Now $27.28 + GST = $30 

$ 349 


SET OF 8 / ¼” SHANK / 3/8” AND 

½” HEAD DIAMETER BURRS 


Now $317.28 + GST 

SHINANO SI-2600L 

180MM ANGLE GRINDER 


Now $511.82 + GST 

• Disc Size: 180 x 6 x 22CH 

• Spindle Thread: Splined 



$ 212 

$ 166 

SHINANO SI-2001S 

¼” COMPACT DIE GRINDER 


Now $150.91 + GST 

• Collet Options: 6mm, 1/8”, 3mm 




SET OF 8 / ¼” SHANK / 

¼” HEAD DIAMETER BURRS 

Now $186.37 + GST 

$ 205 

$ 563 

SHINANO SI-3100 

150MM DUAL ACTION 

BAR HANDLE SANDER 


Now $192.73 

+ GST 


• Orbit Dia: 7mm 

ALLIANCE AT-3350 

C SERIES NAILER 

• Takes C series brads 

• Length: 20 – 50mm 

• Head: 3mm 

• Gauge: 16 


Now $329.09 + GST 

$ 362 

ALLIANCE AL-1310K 

¼” MINI DIE GRINDER KIT 


NOW $79.10 + GST 


• Variable speed 

$ 87 

WAGNER 0311097 

AIRLESS SPRAY GUN KIT 

WITH HOPPER 

$2265.46 + GST 

• Kit includes 5 litre hopper, AG-08 

airless gun, 15m airless hose, 

515 Trade Tip 2 and base. 

• Max Pressure: 3000psi 

• Max Flow Rate: 1.25L/Min 

$ 2492 

$ 173 

ALLIANCE AL-3101 

3/16” CAPACITY RIVETER 


Now $157.28 + GST 

• Std Nose Pieces: 3/32”, 1/8”, 5/32”, 3/16” 

• Traction Power: 720kg 

406ES 

TOOTHED ERASER WHEEL 

Normal price $13.20 

Now $8.64 + GST 

• For use on AL-1341 


PIN STRIPE REMOVER 


Now $98.18 + GST 

• Used by automotive painters for 

removal of pin stripes before painting 

and also erases marks on plastics and 

painted surfaces. 



$ 9.50 

$ 108 

$ 308 


150MM SELF-VAC 

PALM GRIP SANDER 


Now $280 + GST 


• Orbit Dia: 3mm 

ALLIANCE 

AL-2340 3/8” HEAVY DUTY 

RATCHET WRENCH 

Al-2345 ½” HEAVY DUTY 

RATCHET WRENCH 

• Twin Pawl Ratchet Head 


• Torque: 81Nm 60ft lb 


Now $127.28 

+ GST 

$ 140

Industrial Air Tools 

TRADE SPECIALS 

OCTOBER, NOVEMBER, DECEMBER 2010 

SURFACE PREPARATION SPECIALS 

TRELAWNY MHS11 

159.6000 

MULTI-HEADED FLOOR 

SCABBLER 


Now $6750 + GST 

• Cutting Width: 250mm 

• Blows per minute: 11 X 2200 

• Air Consumption: 1560L/Min 55cfm 

• Weight: 70kg 

$ 7425 

TRELAWNY 131.3000 

3B SEMI PISTOL GRIP NEEDLE 

SCALER 


Now $660 + GST 

• Blows Per Minute: 2200 

• Needle Qty: 28 X 3mm 

• Air Consumption: 228l/Min 8cfm 

• Weight: 4.5kg 

$ 1614 

TOP CAT 

CHIPPING HAMMER KIT 

TAKES 0.580” HEX CHISELS 


NOW $1467.28 

• Kit includes TC-10, TC-20 or TC-30 Chipping hammer, 

point + 2 chisels, roll of 20m x 12mm hose and 

bottle of air tool lubricant in a toolbox 

• Blows / Min: 2800 (TC-10) 2400 (TC-20) 1900 (TC-30) 

• Max Air Cons: 11.8L/Sec 25cfm 

• Weight: 6.6kg (TC-10) 6.7kg (TC-20) 7.0kg (TC-30) 

$ 726 $ 1284 


HEAVY DUTY TRIPLE HEAD 

SCABBLER 


Now $1167.27 + GST 

• Blows Per Minute: 3 X 2400 

• Air Consumption: 408l/Min 14.3cfm 


$ 1337 


3BPG PISTOL GRIP NEEDLE / 

CHISEL SCALER KIT 


Now $1215.46 + GST 

• Blows Per Minute: 2200 

• Needle Qty: 28 X 3mm 

• Also Takes 12mm Square Chisels 

• Air Consumption: 228l/Min 8cfm 


NEW 

MODEL 

$ 1180 


TRIPLE HEAD BACK HANDLE 

SCABBLER 


Now $1072.73 + GST 

• Blows Per Minute: 3 X 2800 

• Air Consumption: 450l/Min 15.9cfm 

• Weight: 4.7kg

october, november, december 2010 - Greater West Power Tools

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?