MOTOMAN Arcsystem

More documents

Recommendations

Info

Robots SSF2000 Reach 1378 mm EA1800N Reach 1807 mm Positioners (one station) HSD-250 SNM HSD-500 SNM 2 Mandatory: Robot, positioner and safety equipment MT1-750 S2NL SSA2000 Reach 1390 mm EA1900N Reach 1904 mm Endless HSD-250 SNM HSD-500 SNM MT1-250 S2N HSC-250 SNM SPE, SPF, SPH tailstock Positioners (two station) RM2-250 STN RM2-500 STN HP20 Reach 1717 mm HP20-6 Reach 1915 mm HSC-500 SNM SPE, SPF, SPH tailstock VMH-250 S2NM VMH-500 S2NM Endless VMH-250 S2NM VMH-500 S2NM VMH-500 CD VMI-500 NM Safety equipment Sheet metal guard Light guard Safety fence, curtains and sliding doors MOTOMAN Arcsystem The MOTOMAN Arcsystem consists of one or two robots and a positioner plus necessary safety equipment. In addition to this, it is possible to add more equipment from our wide range of predefi ned options and accessories. MOTOMAN Arcsystem welding cells are designed to deliver cost effi cient, reliable and high performance arc welding operation. They are based on a modular system of standard components that can meet the requirements of the general and automotive industry using a minimum of fl oor space. The MOTOMAN Arcsystems are built to a global standard that delivers savings in both time and money. Our welding systems can be designed to meet customer demands as well as national and international safety regulations. With all the optional equipment to choose from, it is easy to customize an Arcsystem to suit your particular need, a customization that is more cost effective than a custom designed welding cell. When built on a platform, the Arcsystem is easy to move and relocate somewhere else on the factory fl oor with a forklift truck or a crane. The holes for the forklift and the lifting eye bolts are already in place and easy to use.
Advantages at a glance � Low investment cost � Short delivery times � Easy to install and operate � Reliable operation � Modular design � Plug and play � More than 600 possible combinations � Well proven technology Design an ideal combination to suit your particular need! MotoVisual is a user friendly three dimensional simulation software designed to support project engineering. Complete with 3D models of our sample cells and standard components, MotoVisual makes it easy to design a customized arc welding system to suit your particular needs! Optional: Robot stand, tracks, welding equipment and accessories Robot stand H = 180 to 1500 mm Floor mounted Tracks TPL-600 Pneumatic Welding equipment and accessories Fume hood Air cooled torches Torch cleaning unit Angle = 15° or 30° Tilted section TSL-600 SN Servo powered Wire feed units from Fronius, Kemppi, Motoman, SKS etc. H = 420 to 1420 mm Track mounted TSL-1000 SN Servo powered Water cooled torches A wide range of power sources Platform Operator panel Roller doors Modular concept with well proven standard components 3
Page 1: MOTOMAN Arcsystem The most cost eff
Page 5 and 6: Space saving design with platform a
Page 7 and 8: Arcsystem RM2 RM2-250 STN L = 3000

MOTOMAN Arcsystem

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?