Specification Catalog - Accent Building Products

accentbuildingproducts.com

Specification Catalog - Accent Building Products

Specification Catalog

March 7, 2011


Five (5) Year Limited Warranty

High Point Cabinetry warrants to the original user, for �Household Use� only, as

defined below, that for a five (5) year term, measured from the date of purchase from

High Point Cabinetry, that High Point Cabinetry will repair or replace any product of

High Point Cabinetry’s manufacture which is defective in material or workmanship.

The term �Household Use� shall include use for personal and family purposes as well

as in hotel or motel residential short term rental units, but does not apply to other

purposes for commercial use. The remedy of repair or replacement (which shall

be at the option of High Point Cabinetry) is the exclusive remedy of the user.

Claims for repair or replacement should be submitted to High Point Cabinetry

at P. O. Box 870, High Point, NC, 27260-0870.

It is the nature of wood products to have variations in the grain pattern and wood

color. Any surface finish may be affected by exposure to sunlight and other elements

which are part of the aging process. These material variations and changes are not

covered by this Warranty. Proper care and use are essential to preserving your rights

to this Warranty. High Point Cabinetry will not repair or replace any product if damage

is caused by improper use or maintenance such as the use of abrasives or harsh

cleaning agents on cabinet surfaces.

Also, this warranty does not cover damage to High Point Cabinetry products from

negligence, abuse, normal wear and tear, accidents, trauma, fire, water damage, or

other catastrophe, or if a product is routinely subjected to steam or unusually high

humidity. Costs related to damages incurred in transit, handling, installation, and all

costs related to the transportation, removal or reinstallation of defective High Point

Cabinetry products are not assumed by High Point Cabinetry under this Warranty.

HIGH POINT CABINETRY MAKES NO IMPLIED WARRANTIES OF MERCHANT-

ABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. THESE AND ALL

OTHER IMPLIED WARRANTIES ARE SPECIFICALLY DISCLAIMED. IN NO

EVENT WILL HIGH POINT CABINETRY BE LIABLE FOR CONSEQUENTIAL,

INDIRECT OR INCIDENTAL DAMAGES RESULTING FROM ANY CAUSE.

Some states do not allow limitations on how long an implied warranty lasts and some

states do not allow an exclusion or limitation of incidental or consequential damages,

so the above limitations or exclusions may not apply to you. This warranty gives you

specific legal rights, and you may also have other rights which vary from state to

state.

High Point Cabinetry is a Division of Marsh Furniture Company


INDEX

1.1 Walls

2.1 Bases

3.1 Talls

4.1 Vanities

5.2 Overlay Ends and Doors

5.3 Hoods

5.7 Wall Accessories

5.9 Base Accessories

5.12 Tall Accessories

5.13 Fillers

5.19 Moldings

5.21 Decorative Accents

5.26 Miscellaneous

6.1 Sales Samples

High Point Cabinetry — Effective 03/07/2011

0.1

INDEX


0.2

TABLE OF CONTENTS

TABLE OF CONTENTS AND ABBREVIATIONS

Abbrev. Description Page Abbrev. Description Page

20 Door Wall Pager. Door Pager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

50, 45 . . . . . . . . Sales Samples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

64 Door Pager. Door Pager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

2FIB . . . . . . . . . Two Faced Island Base . . . . . . . . . . . . . . . . . . . . . 2.6

A

ACOR ........ Acanthus Corbels ..........................5.23

APL . . . . . . . . . Apple Foot ................................5.23

AV . . . . . . . . . . . Arched Valance ............................5.21

B

BAFFL........ Base Angled Filler - Fluted .................5.16

BBP . . . . . . . . . Bead Board Panel . . .......................5.25

BC . . . . . . . . . . . Bookcase Cabinet ......................1.9, 5.7

BCWN. . ...... Beaded Crown Molding ....................5.20

BEC. . . . . . . . . . Base End Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5

BES . . . . . . . . . . Base End Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6

BF . . . . . . . . . . . Base Filler ................................5.15

BFB . . . . . . . . . Base Filler Box ............................5.13

BFC . . . . . . . . . Base Fluted Column .......................5.13

BFFL . . . . . . . . . Base Filler - Fluted ........................5.16

BM . . . . . . . . . . . Batten Molding ............................5.19

BPC . . . . . . . . . Base Profiled Column ......................5.14

BSB . . . . . . . . . Burner Sink Base . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3

BSF . . . . . . . . . . Base Sink Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7

BTC . . . . . . . . . . Base Transitional Cabinet . . . . . . . . . . . . . . . . . . . 2.5

C

CAH. . . . . . . . . . Corner Appliance Hutch . . . .............1.10, 5.8

CBF . . . . . . . . . . Corner Base Filler .........................5.15

CDU . . . . . . . . . Carousel Display Unit . . . . . . . . . . . . . . . . . . . . . . . 6.2

CM. . . . . . . . . . . Cap Molding . . ............................5.19

CR . . . . . . . . . . . Corner Round Molding - Outside Corner .....5.19

CS . . . . . . . . . . . Corner Shelf ...........................1.9, 5.7

CSF . . . . . . . . . . Corner Sink Front . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7

CSTP......... Corner Shelf Top Plate . . . ...............1.9, 5.7

CT . . . . . . . . . . . Cutlery Tray ..........................2.9, 5.10

CTEM . ....... Counter Top Edge Molding . ................5.19

CV . . . . . . . . . . . Cove Molding .............................5.19

CWC . . . . . . . . . Corner Wall Cabinet - Diagonal . . . . . . . . . . . . . . 1.6

CWCGL ...... Corner Wall Cabinet - Diagonal with

Glass Doors ................................1.6

CWCMD ...... Corner Wall Cabinet - Diagonal with

Mullion Doors ...............................1.6

CWF . . . . . . . . . Corner Wall Filler . .........................5.15

D

DB . . . . . . . . . . . Drawer Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3

DBP. . . . . . . . . . Drawer Base Pots & Pans . . . . . . . . . . . . . . . . . . . 2.3

DCB. . . . . . . . . . Decorative Counter Bracket . . ...............5.23

DCK . . . . . . . . . Ductless Conversion Kit . . . . . . . . . . . . . . . . . . . . . 5.6

DKBU ........ Ductless Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6

DM. . . . . . . . . . . Dentil Molding . ............................5.20

DMK . . . . . . . . . Door Mounting Kit . ....................2.9, 5.10

DO . . . . . . . . . . . Desk Organizer ........................1.9, 5.7

DWB . . . . . . . . . Double Waste Baskets . . . ..............2.9, 5.10

DWE . . . . . . . . . Dishwasher End Panel ................5.17, 5.18

High Point Cabinetry — Effective 03/07/2011

E

ES . . . . . . . . . . End Skins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2

EZCB ........ Easy Reach Corner Base . . . . . . . . . . . . . . . . . . . . 2.5

F

FA . . . . . . . . . . . Furniture Aprons ..........................5.21

FF . . . . . . . . . . . Filler Strip - Laminate.......................5.15

FP . . . . . . . . . . . Finished Panel . . ..........................5.25

FPC . . . . . . . . . . Finished Panel Crossgrain ..................5.25

FS . . . . . . . . . . . Filler Strip ................................5.15

FSFL . . . . . . . . . Filler Strip - Fluted ....................5.16, 5.17

FV . . . . . . . . . . . Frieze Valance ............................5.21

G

GR . . . . . . . . . . Galley Rail ................................5.19

GRCL ........ Grape Cluster .............................5.22

GRCOR ...... Grape Corbel .............................5.22

H

HS . . . . . . . . . . Heat Shields ..............................5.26

K

KC . . . . . . . . . . . Cultured Marble . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

L

LB . . . . . . . . . . . Light Bar Trim Molding .....................5.19

LBM. . . . . . . . . . Individual Finish Box Samples . . . . . . . . . . . . . . . . 6.2

LBCP......... LeMans Corner Pull Out ...............2.10, 5.11

LCWN ....... Large Crown Molding with Heel . . . . . . . . . . . . . 5.20

LES . . . . . . . . . . Left End Splash . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

LONLAYA .... Large Acanthus Onlay .....................5.21

LONLAYGR . . Large Grape Onlay ........................5.22

LS . . . . . . . . . . . Loose Shelving ............................5.26

LSCB......... Lazy Susan Corner Base . . . . . . . . . . . . . . . . . . . . 2.4

M

MKC . . . . . . . . . Cultured Marble - 19� deep . . . . . . . . . . . . . . . . . . 4.8

O

OC . . . . . . . . . . . Oven Cabinet ..........................3.4, 3.5

ODK . . . . . . . . . Oven Drawer Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4

ONLAYA3 . . . . Small Acanthus Ornament ..................5.21

ONLAYA6 . . . . Large Acanthus Ornament . . ................5.21

OVDB ........ Overlay Door - Base . . . . . . . . . . . . . . . . . . . . . . . . 5.2

OVDUC....... Overlay Door - Utility Cabinet . . . . . . . . . . . . . . . . 5.2

OVDV ........ Overlay Door - Vanity - Standard . . . . . . . . . . . . . 5.2

OVDVBH ..... Overlay Door - Vanity - Base Height . . . . . . . . . . 5.2

OVDW........ Overlay Door - Wall . . . . . . . . . . . . . . . . . . . . . . . . . 5.2

P

PB . . . . . . . . . . . Pantry Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2

PBC. . . . . . . . . . Pantry Base Corner . . . . . . . . . . . . . . . . . . . . . . . . . 2.4

PFT . . . . . . . . . Plain Full Turning .....................5.23, 5.24

PROD ........ Pantry Roll Out, Double ................3.6, 5.12

PROS ........ Pantry Roll Out Single . . . ..............3.6, 5.12

PST . . . . . . . . . Split Turning End Post .....................5.24

PST30/42/84 . . Split Turning Plain Center ..................5.24


R

TABLE OF CONTENTS AND ABBREVIATIONS

Abbrev. Description Page Abbrev. Description Page

REP. . . . . . . . . . Refrigerator End Panel . . ...................5.17

RES. . . . . . . . . . Right End Splash . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

RFT . . . . . . . . . Reeded Full Turning .......................5.24

RH . . . . . . . . . . . Range Hood . . . .........................5.3-5.6

RHB. . . . . . . . . . Range Hood Blower . . . . . . . . . . . . . . . . . . . . . . . . 5.6

RLR . . . . . . . . . Radius Light Rail Molding ..................5.20

RLS . . . . . . . . . . Round Lazy Susan . . . .................1.10, 5.8

RM. . . . . . . . . . . Rope Molding .............................5.20

ROS3 ........ Rosette . . . ...............................5.23

RST30/42/84 . . Split Turning Reed Center ..................5.24

RT . . . . . . . . . . . Roll Out Tray ...........................2.8, 5.9

RTP . . . . . . . . . . Range Toe Plate . . ........................5.26

RV . . . . . . . . . . . Valance - Profiled Edge . . ...................5.21

RW . . . . . . . . . . Refrigerator Wall Cabinets . . . . . . . . . . . . . . . . . . . 1.5

S

SBM . . . . . . . . . Shoe Base Molding ........................5.20

SBX . . . . . . . . . . Sample Box Only . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

SBXC ........ Complete Sample Box of Finishes . . . . . . . . . . . . 6.2

SCMC . . ...... Shaker Crown Molding......................5.20

SCR . . . . . . . . . Small Outside Corner . . . ...................5.19

SF . . . . . . . . . . . Soffit Molding .............................5.19

SFB . . . . . . . . . Scribe Base Filler .........................5.17

SFE . . . . . . . . . Sink Front End Panel . . . ...................5.18

SFF . . . . . . . . . Sink Front Floors . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7

SFW . . . . . . . . . Scribe Wall Filler ..........................5.17

SH . . . . . . . . . . Stemware Holder . . . ...................1.10, 5.8

SM . . . . . . . . . . Scribe Molding ............................5.19

SMC . . . . . . . . . Sample Molding Chain . . . . . . . . . . . . . . . . . . . . . . . 6.2

SONLAYGR . . . Small Grape Onlay . . . .....................5.22

SPDBX ...... Spice Drawer Box .....................1.10, 5.8

SPWC ....... Spice Drawer Cabinet/Wine Cube .......1.10, 5.8

SSCV ........ Solid Scalloped Valance Wood ..............5.21

SWB . . . . . . . . . Single Waste Basket . . . ................2.9, 5.10

T

TB . . . . . . . . . . . Tray Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2

TBSM . . . . . . . . Triple Bead Stacked Molding ................5.20

TF . . . . . . . . . . . Tall Filler .................................5.16

TFB . . . . . . . . . Tall Filler Box .............................5.13

TFC . . . . . . . . . Tall Fluted Column .........................5.14

TLG . . . . . . . . . 2-Sided Taper Leg .........................5.23

TLL . . . . . . . . . . Tulip Foot ................................5.23

TP . . . . . . . . . . . Toe Plate cover ............................5.26

TPC . . . . . . . . . . Tall Profiled Column ........................5.14

TPC-Black . . . . Toe Plate Cap .............................5.26

TPC-White . . . . Toe Plate Cap .............................5.26

TUK . . . . . . . . . Touch-up Kit . . . ...........................5.26

U

UC . . . . . . . . . . Utility Cabinet . ..........................3.2-3.3

UCWN ....... Universal Crown Molding ...................5.20

UC3S ........ Utility Cabinet - Three-Shelf Kit .........3.6, 5.12

V

VBF . . . . . . . . . . Vanity Base Filler ..........................5.16

VBFFL . . . . . . . Vanity Base Filler - Fluted ..................5.17

VD . . . . . . . . . . Vanity Drawer Base . . . . . . . . . . . . . . . . . . . . . . . . . 4.5

VDBH . . . . . . . . Vanity Drawer - Base Height . . . . . . . . . . . . . . . . . 4.6

VDL . . . . . . . . . Vanity Drawer Lavatory . . . . . . . . . . . . . . 4.3, 4.4, 4.5

VDLBH . . . . . . . Vanity Drawer Lavatory -

Base Height . ......................4.3, 4.4, 4.5

VDU . . . . . . . . . Vanity Drawer Unit ......................4.7, 4.8

VFB . . . . . . . . . Vanity Filler Box . . .........................5.13

VFBBH . . . . . . . Vanity Filler Box - Base Height . . . . . . . . . . . . . . 5.13

VFC . . . . . . . . . Vanity Fluted Column . . . . . . . . . . . ...........5.14

VFCBH . . . . . . Vanity Fluted Column - Base Height . . . . . . . . . 5.14

VFD . . . . . . . . . Vanity File Drawer ......................4.6, 4.7

VL . . . . . . . . . . . Vanity Lavatory .........................4.2, 4.6

VLF . . . . . . . . . . Vanity Lavatory Front . . . . . . . . . . . . . . . . . . . . . . . . 4.7

VLBH . . . . . . . . Vanity Lavatory - Base Height . . . . . . . . . . . . 4.2, 4.3

VLEG . . . . . . . . Vanity Desk Leg . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

VPC . . . . . . . . . Vanity Profiled Column. . . . . . . . . . . . . . . . . . . . . . 5.14

VPCBH . . . . . . . Vanity Profiled Column - Base Height. . . ......5.14

VSD . . . . . . . . . Vanity Side Drawer . . . . . . . . . . . . . . . . . . . . . . . . . 4.4

VSDBH . . . . . . Vanity Side Drawer - Base Height . . . . . . . . . . . . 4.4

VWS . . . . . . . . . Vanity Wall Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . 4.7

W

WC . . . . . . . . . . Wall Cabinet ........................1.2-1.4, 1.5

WCC . . . . . . . . Wall Corner Cabinet .....................1.5-1.6

WCGL . . . . . . . Wall Cabinet with Glass Doors . . . . . . . . . . . . 1.3-1.4

WCM . . . . . . . . Wall Microwave Cabinet . . . . . . . . . . . . . . . . . . . . . 1.8

WCMD . . . . . . . Wall Cabinet with Mullion Doors . . . . . . 1.2, 1.3-1.4

WCMW . . . . . . Wall Cabinet with Microwave Cabinet . . . . . . . . . 1.8

WCPRE . . . . . . Wall Cabinet with Plate Rack . . . . . . . . . . . . . . . . 1.4

WCR . . . . . . . . Outside Corner Molding - Laminate . . . . . . . . . . 5.19

WCWN ....... Crown Molding.............................5.20

WDCT . . . . . . . Wood Cutlery Tray ....................2.10, 5.11

WDDWB ...... Double Waste Baskets. . . . . . . . . . . . . . . . . . 2.9, 5.10

WDSI......... Spice Drawer Insert ...................2.10, 5.11

WDSWB ...... Single Waste Basket . . . . . . . . . . . . . . . . . . . 2.9, 5.10

WDUT . . . . . . . . Wood Utility Tray......................2.10, 5.11

WEA . . . . . . . . . Wall End Angled Cabinet - Manhattan . . . . . . . . . 1.7

WEC . . . . . . . . . Wall End Angled Cabinet . . . . . . . . . . . . . . . . . . . . 1.7

WECGL . . . . . . Wall End Angled Cabinet with

Glass Doors ...............................1.7

WFB . . . . . . . . . Wall Filler Box ............................5.13

WFC . . . . . . . . . Wall Fluted Column ........................5.13

WLB . . . . . . . . . Light Bar Trim Molding . . . . . . . . . . . . . . . . .....5.19

WPC . . . . . . . . . Wall Profiled Column .......................5.14

WR . . . . . . . . . . Wine Rack . . ..........................1.10, 5.8

WRC . . . . . . . . Radius Corner Molding . . . . . . . . . . . . . . . . . . . . . 5.19

WRCE ....... Lattice Wine Rack Cabinet . . . . . . . . . . . . . . . . . . . 1.4

WRT . . . . . . . . . Wood Roll Out Tray .....................2.8, 5.9

WSM . . . . . . . . . Cap Molding - Laminate . . . . . . . . . . . . . . . . . . . . 5.19

WST . . . . . . . . . Scribe Trim - Laminate . . . . . . . . . . . . . . . . . . . . . 5.19

WSV . . . . . . . . . Valance - Laminate.........................5.21

Aerosol Spray .............................5.26

Quart Stain ................................5.26

Dealer Binder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

Mini Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

Cabinet Modifications .......................0.14

High Point Cabinetry — Effective 03/07/2011

0.3

TABLE OF CONTENTS


0.4

TABLE OF CONTENTS

TABLE OF CONTENTS BY SECTION

WALL CABINETS

WALLS

WC. . . . . . . . . . . Wall Cabinet ..................... 1.2-1.4, 1.5

WCGL . . . . . . . Wall Cabinet with Glass Doors .........1.3-1.4

WCMD . . . . . . . Wall Cabinet with Mullion Doors ....1.2, 1.3-1.4

WCPRE . . . . . . Wall Cabinet with Plate Rack . . . . . . . . . . . . . . . 1.4

WEA . . . . . . . . . Wall End Angled Cabinet - Manhattan . . . . . . . 1.7

WEC . . . . . . . . . Wall End Angled Cabinet . . . . . . . . . . . . . . . . . . 1.7

WECGL . . . . . . Wall End Angled Cabinet with

Glass Doors .............................1.7

WRCE. ....... Lattice Wine Rack Cabinet . . . . . . . . . . . . . . . . . 1.4

CORNER WALLS

CWC . . . . . . . . . Corner Wall Cabinet - Diagonal . . . . . . . . . . . . . 1.6

CWCGL ...... Corner Wall Cabinet - Diagonal with

Glass Doors ..............................1.6

CWCMD . ..... Corner Wall Cabinet - Diagonal with

Mullion Doors .............................1.6

WCC . . . . . . . . . Wall Corner Cabinet . ..................1.5-1.6

MICROWAVE WALLS

WCM . . . . . . . . . Wall Microwave Cabinet . . . . . . . . . . . . . . . . . . . 1.8

WCMW . . . . . . . Wall Cabinet with Microwave Cabinet . . . . . . . 1.8

REFRIGERATOR WALLS

RW. . . . . . . . . . . Refrigerator Wall Cabinets . . . . . . . . . . . . . . . . . 1.5

REP. . . . . . . . . . Refrigerator End Panel ...................5.17

WALL ACCESSORIES

BC . . . . . . . . . . . Bookcase Cabinet.....................1.9, 5.7

CAH. . . . . . . . . . Corner Appliance Hutch . . ............1.10, 5.8

CS . . . . . . . . . . . Corner Shelf..........................1.9, 5.7

CSTP. . . ...... Corner Shelf Top Plate . . ..............1.9, 5.7

DO . . . . . . . . . . . Desk Organizer .......................1.9, 5.7

SH . . . . . . . . . . . Stemware Holder . ...................1.10, 5.8

WR. . . . . . . . . . . Wine Rack . . . .......................1.10, 5.8

SPDBX ....... Spice Drawer Box....................1.10, 5.8

SPWC . . ...... Spice Drawer Cabinet/Wine Cube......1.10, 5.8

RLS . . . . . . . . . . Round Lazy Susan. . .................1.10, 5.8

RANGE HOODS

RH . . . . . . . . . . . Range Hood ......................... 5.3-5.6

RHB. . . . . . . . . . Range Hood Blower . . . . . . . . . . . . . . . . . . . . . . . 5.6

DCK. . . . . . . . . . Ductless Conversion Kit . . . . . . . . . . . . . . . . . . . 5.6

DKBU ........ Ductless Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6

BASE CABINETS

BASES

TB . . . . . . . . . . . Tray Base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2

BEC. . . . . . . . . . Base End Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . 2.5

BES . . . . . . . . . . Base End Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6

BSB . . . . . . . . . . Burner Sink Base . . . . . . . . . . . . . . . . . . . . . . . . . 2.3

BSF . . . . . . . . . . Base Sink Front . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7

BTC . . . . . . . . . . Base Transitional Cabinet . . . . . . . . . . . . . . . . . . 2.5

DB . . . . . . . . . . . Drawer Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3

DBP. . . . . . . . . . Drawer Base Pots & Pans . . . . . . . . . . . . . . . . . 2.3

PB . . . . . . . . . . . Pantry Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2

SFF . . . . . . . . . . Sink Front Floors . . . . . . . . . . . . . . . . . . . . . . . . . 2.7

CORNER BASES

CSF . . . . . . . . . . Corner Sink Front . . . . . . . . . . . . . . . . . . . . . . . . . 2.7

EZCB. . . ...... Easy Reach Corner Base . . . . . . . . . . . . . . . . . . 2.5

LSCB......... Lazy Susan Corner Base . . . . . . . . . . . . . . . . . . 2.4

PBC. . . . . . . . . . Pantry Base Corner . . . . . . . . . . . . . . . . . . . . . . . 2.4

High Point Cabinetry — Effective 03/07/2011

ISLAND BASES

2FIB. . . . . . . . . . Two Faced Island Base. . . . . . . . . . . . . . . . . . . . 2.6

BASE ACCESSORIES

SWB . . . . . . . . . Single Waste Basket .................2.9, 5.10

WDSWB . . . . . . Wood Single Waste Basket . . . . . . . . . . . 2.9, 5.10

DWB . . . . . . . . . Double Waste Baskets ...............2.9, 5.10

WDDWB . . . . . . Wood Double Waste Baskets. . . . . . . . . . 2.9, 5.10

DMK . . . . . . . . . Door Mounting Kit - Waste Basket . . . . . 2.9, 5.10

CT . . . . . . . . . . . Cutlery Tray .........................2.9, 5.10

WDCT . . . . . . . Wood Cutlery Tray . . ................2.10, 5.11

RT . . . . . . . . . . . Roll Out Tray .........................2.8, 5.9

WRT . . . . . . . . . Wood Roll Out Tray ...................2.8, 5.9

WDUT . . . . . . . . Wood Utility Tray . . . ................2.10, 5.11

WDSI......... Spice Drawer Insert .................2.10, 5.11

LBCP......... LeMans Corner Pull Out .............2.10, 5.11

TALL CABINETS

OVEN CABINETS

OC . . . . . . . . . . . Oven Cabinet . . . ..................... 3.4, 3.5

ODK . . . . . . . . . Oven Drawer Kit . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4

UTILITY CABINETS

UC . . . . . . . . . . . Utility Cabinet ........................ 3.2-3.3

TALL ACCESSORIES

PROD ........ Pantry Roll Out, Double . . . ...........3.6, 5.12

PROS ........ Pantry Roll Out Single ...............3.6, 5.12

UC3S. . ....... Utility Cabinet Three Shelf Kit . . . . . . . . . 3.6, 5.12

VANITY CABINETS

WALLS

VWS . . . . . . . . . Vanity Wall Cabinet . . . . . . . . . . . . . . . . . . . . . . . 4.7

BASES

VD . . . . . . . . . . . Vanity Drawer Base . . . . . . . . . . . . . . . . . . . . . . . 4.5

VDBH . . . . . . . . Vanity Drawer - Base Height . . . . . . . . . . . . . . . 4.6

VFD . . . . . . . . . . Vanity File Drawer ....................4.6, 4.7

VDU. . . . . . . . . . Vanity Drawer Unit ....................4.7, 4.8

VLEG . . . . . . . . Vanity Desk Leg . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

SINKS

VDL . . . . . . . . . . Vanity Drawer Lavatory ........... 4.3, 4.4, 4.5

VDLBH . . . . . . . Vanity Drawer Lavatory -

Base Height .....................4.3, 4.4, 4.5

VSD. . . . . . . . . . Vanity Side Drawer. . . . . . . . . . . . . . . . . . . . . . . . 4.4

VSDBH . . . . . . . Vanity Side Drawer - Base Height. . . . . . . . . . . 4.4

VL . . . . . . . . . . . Vanity Lavatory ...................... 4.2, 4.6

VLBH. . . . . . . . . Vanity Lavatory - Base Height . . . . . . . . . . 4.2, 4.3

VLF . . . . . . . . . . Vanity Lavatory Front . . . . . . . . . . . . . . . . . . . . . . 4.7

VANITY TOPS

KC . . . . . . . . . . . Cultured Marble. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

MKC . . . . . . . . . Cultured Marble - 19” deep. . . . . . . . . . . . . . . . . 4.8

LES . . . . . . . . . . Left End Splash. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

RES. . . . . . . . . . Right End Splash . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

DECORATIVE DOORS AND ENDS

OVDW........ Overlay Door - Wall . . . . . . . . . . . . . . . . . . . . . . . 5.2

OVDB ........ Overlay Door - Base . . . . . . . . . . . . . . . . . . . . . . 5.2

OVDUC. . . .... Overlay Door - Utility Cabinet. . . . . . . . . . . . . . . 5.2

OVDV ........ Overlay Door - Vanity - Standard . . . . . . . . . . . 5.2

OVDVBH ..... Overlay Door - Vanity - Base Height. . . . . . . . . 5.2

ES . . . . . . . . . . . End Skins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2


TABLE OF CONTENTS BY SECTION

FILLERS

WALL FILLERS

CWF . . . . . . . . . Corner Wall Filler . .......................5.15

WFB . . . . . . . . . Wall Filler Box ...........................5.13

FS . . . . . . . . . . . Filler Strip...............................5.15

FSFL . ........ Filler Strip - Fluted .......................5.16

FF . . . . . . . . . . . Filler Strip - Laminate ....................5.15

SFW . . . . . . . . . Scribe Wall Filler.........................5.17

WFC . . . . . . . . . Wall Fluted Column . . . ...................5.13

WPC . . . . . . . . . Wall Profiled Column . . ...................5.14

BASE FILLERS

BF . . . . . . . . . . . Base Filler ..............................5.15

BFB . . . . . . . . . . Base Filler Box ..........................5.13

BFC . . . . . . . . . . Base Fluted Column .....................5.13

BFFL . ........ Base Filler - Fluted. . . . ...................5.16

BAFFL........ Base Angled Filler - Fluted ................5.16

BPC. . . . . . . . . . Base Profiled Column ....................5.14

SFB . . . . . . . . . . Scribe Base Filler ........................5.17

CBF . . . . . . . . . . Corner Base Filler . . . ....................5.15

TALL FILLERS

TF . . . . . . . . . . . Tall Filler ................................5.16

TFB . . . . . . . . . . Tall Filler Box............................5.13

TFC . . . . . . . . . . Tall Fluted Column .......................5.14

TPC . . . . . . . . . . Tall Profiled Column . . . ...................5.14

VANITY FILLERS

VBF . . . . . . . . . . Vanity Base Filler ........................5.16

VBFFL. . . . . . . . Vanity Base Filler - Fluted.................5.17

VFB . . . . . . . . . . Vanity Filler Box . . . ......................5.13

VFBBH . . . . . . . Vanity Filler Box - Base Height ............5.13

VFC . . . . . . . . . . Vanity Fluted Column. ....................5.14

VFCBH . . . . . . . Vanity Fluted Column - Base Height........5.14

VPC. . . . . . . . . . Vanity Profiled Column ...................5.14

VPCBH . . . . . . . Vanity Profiled Column - Base Height ......5.14

MOLDINGS

BCWN. . . ..... Beaded Crown Molding ...................5.20

BM . . . . . . . . . . . Batten Molding ..........................5.19

CM. . . . . . . . . . . Cap Molding . . ..........................5.19

CR . . . . . . . . . . . Corner Round Molding - Outside Corner ....5.19

CTEM ........ Counter Top Edge Molding ................5.19

CV . . . . . . . . . . . Cove Molding . ..........................5.19

DM. . . . . . . . . . . Dentil Molding ...........................5.20

GR . . . . . . . . . . . Galley Rail ..............................5.19

LB . . . . . . . . . . . Light Bar Trim Molding ...................5.19

LCWN ........ Large Crown Molding with Heel............5.20

RLR . . . . . . . . . . Radius Light Rail Molding .................5.20

RM. . . . . . . . . . . Rope Molding ...........................5.20

SBM . . . . . . . . . Shoe Base Molding ......................5.20

SCMC ........ Shaker Crown Molding . . . ................5.20

SCR. . . . . . . . . . Small Outside Corner . ...................5.19

SF . . . . . . . . . . . Soffit Molding............................5.19

SM . . . . . . . . . . . Scribe Molding ..........................5.19

TBSM . . . . . . . . Triple Bead Stacked Molding ..............5.20

UCWN........ Universal Crown Molding .................5.20

WCWN ....... Crown Molding ..........................5.20

WCR . . . . . . . . . Outside Corner Molding - Laminate . . ......5.19

WLB . . . . . . . . . Light Bar Trim Molding . . . . . . . . . . .........5.19

WRC . . . . . . . . . Radius Corner Molding . . . . . . . . . . . . . . . . . . . 5.19

WSM . . . . . . . . . Cap Molding - Laminate . . . . . . . . . . . . . . . . . . 5.19

WST . . . . . . . . . Scribe Trim - Laminate . . . . . . . . . . . . . . . . . . . 5.19

ACCESSORIES

ACOR ........ Acanthus Corbels ........................5.23

APL . . . . . . . . . . Apple Foot ..............................5.23

AV . . . . . . . . . . . Arched Valance..........................5.21

BBP . . . . . . . . . . Bead Board Panel .......................5.25

DCB. . . . . . . . . . Decorative Counter Bracket . . . . . . . . . . . . . . . 5.23

DWE . . . . . . . . . Dishwasher End Panel . . . . . . . . . . . . . . 5.17, 5.18

FA . . . . . . . . . . . Furniture Aprons .........................5.21

FP . . . . . . . . . . . Finished Panel . . ........................5.25

FPC . . . . . . . . . . Finished Panel Crossgrain . . . . . . . . . . . . . . . . 5.25

FV . . . . . . . . . . . Frieze Valance ..........................5.21

GRCL . ....... Grape Cluster ...........................5.22

GRCOR . ..... Grape Corbel............................5.22

HS . . . . . . . . . . . Heat Shields ............................5.26

LONLAYA . .... Large Acanthus Onlay . . . . . . . . . . . . . . ......5.21

LONLAYGR . . . Large Grape Onlay.......................5.22

LS . . . . . . . . . . . Loose Shelving ..........................5.26

ONLAYA6 . .... Large Acanthus Ornament . . . . . . . . . . . . . . . . 5.21

ONLAYA3 . .... Small Acanthus Ornament . . . . . . . . . . . . . . . . 5.21

PFT . . . . . . . . . . Plain Full Turning ...................5.23, 5.24

PST . . . . . . . . . . Split Turning End Post. . . . . . . . . . . . . . . . . . . . 5.24

PST30/42/84 . . Split Turning Plain Center . . . . . . . . . . . . . . . . . 5.24

ROS3 ........ Rosette .................................5.23

RST30/42/84 . . Split Turning Reed Center . . . . . . . . . . . . . . . . 5.24

RFT . . . . . . . . . . Reeded Full Turning......................5.24

RTP . . . . . . . . . . Range Toe Plate .........................5.26

RV . . . . . . . . . . . Valance - Profiled Edge. . . . ...............5.21

SFE . . . . . . . . . . Sink Front End Panel. . . . . . . . . . . . . ........5.18

SONLAYGR . . . Small Grape Onlay.......................5.22

SSCV ........ Solid Scalloped Valance Wood . . . . . . . . . . . . 5.21

TLG . . . . . . . . . . 2-Sided Taper Leg .......................5.23

TLL . . . . . . . . . . Tulip Foot ...............................5.23

TP . . . . . . . . . . . Toe Plate cover..........................5.26

TPC-Black . . . . Toe Plate Cap ...........................5.26

TPC-White . . . . Toe Plate Cap ...........................5.26

WSV . . . . . . . . . Valance - Laminate . . . . . . . . . . . . . . . . . . . . . . 5.21

MISCELLANEOUS

20 Door Wall Pager. Door Pager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

50, 45 . . . . . . . . Sales Samples . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

64 Door Pager. Door Pager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

CDU. . . . . . . . . . Carousel Display Unit . . . . . . . . . . . . . . . . . . . . . 6.2

LBM . . . . . . . . . Individual Finish Box Sample . . . . . . . . . . . . . . . 6.2

SBX . . . . . . . . . . Sample Box Only . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

SBXC ........ Complete Sample Box of Finishes . . . . . . . . . . 6.2

SMC . . . . . . . . . Sample Molding Chain. . . . . . . . . . . . . . . . . . . . . 6.2

TUK . . . . . . . . . . Touch-up Kit.............................5.26

Aerosol Spray . .........................................5.26

Quart Stain.............................................5.26

Dealer Binder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

Mini Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

High Point Cabinetry — Effective 03/07/2011

0.5

TABLE OF CONTENTS


CABINET REFERENCES

CASCADE*

White

• Frameless construction

• 5/8� thick white melamine

slab door

• Full overlay

• Concealed hinges

Drawers

• 5/8� thick flat drawer head

• Metal sides with built-in

side guides with two wood

drawer options

• Pulls required

GEORGETOWN* and GEORGETOWN ARCH*

White

• Frameless construction

• 3/4� thick door

• Full overlay

• Rounded corners

• Raised center panel

• Raised center panel with

Arch on upper wall

cabinets

• Not available on bases

• Thermofoil surface

• Concealed hinges

Drawers

• 3/4� thick face

• Raised center panel

• Thermofoil surface

• Metal sides with built-in

side guides with two wood

drawer options

• Pulls required

* White lines have finished ends as standard

DAKOTA*

White

• Frameless construction

• 3/4� thick door

• Full overlay

• Square corners

• Raised center panel

• Thermofoil surface

• Concealed hinges

Drawers

• 3/4� thick face

• Raised center panel

• Thermofoil surface

• Metal sides with built-in

side guides with two wood

drawer options

• Pulls required

High Point Cabinetry — Effective 03/07/2011

0.7

DOOR STYLES


0.8

DOOR STYLES

CABINET REFERENCES

MISSION

Maple

• Frameless construction

• 3/4� thick solid maple door

frame, mortise and tenon

• Full overlay

• Veneered recessed center

panel

Drawers

• Slab 3/4� thick drawer head

• Metal sides with built-in

side guides with two wood

drawer options

• Pulls required

SHAKER

Maple

• Frameless construction

• 3/4� thick solid maple door

frame, mortise and tenon

• Full overlay

• Veneered center panel

recessed in traditional

Shaker style

Drawers

• 5-piece drawer head

• 3/4� thick face frame

• Metal sides with built-in

side guides with two wood

drawer options

• Pulls required

* White lines have finished ends as standard

High Point Cabinetry — Effective 03/07/2011

ROSE HILL

Cherry

• Frameless construction

• 3/4� thick solid cherry wood

door frame

• Full overlay, mortise and

tenon door

• Raised veneer center panel

• Concealed hinges

Drawers

• Profiled 3/4� thick slab

drawer head

• Metal sides with built-in

side guides with two wood

drawer options

• Pulls required

WINDSOR

Maple

• Frameless construction

• 3/4� thick solid maple door

frame

• Full overlay, mitered doors

• Raised veneer center panel

• Concealed hinges

Drawers

• 5-piece drawer head

• 3/4� thick frame

• Flat veneer center panel

• Metal sides with built-in

side guides with two wood

drawer options

• Pulls required


0.10

WOOD INFORMATION

SPECIES AND FINISH AVAILABILITY CHART

Door Style

Price

Column Wood Specie

* Glaze Available

Cascade 1 Melamine �/

Dakota 3 Thermofoil �/

Georgetown 2 Thermofoil �/

Georgetown Arch 2 Thermofoil �/

Manhattan 7 Maple • • • • • • • • •

Manhattan 8 Cherry • • • • • •

Mission 4 Maple • • • • • • • • •

Rosehill* 6 Cherry • • • • • •

Shaker 4 Maple • • • • • • • • •

Windsor* 5 Maple • • • • • • • • •

Note: For Ivory - Ends will be natural painted ivory with a maple natural interior.

Available:

�/ No Glaze

Glaze Type:

• Hand Wiped

Glazes Available:

Alabaster

Caramel

Chocolate

High Point Cabinetry — Effective 03/07/2011

Café

Cordovan

Espresso

Ivory

Natural

Onyx

Sienna

Tuscany

Wheat

White


WOOD SPECIES INFORMATION

Marsh Furniture Company offers both solid

hardwoods and hardwood veneers in our

cabinetry. These natural materials have inherent

characteristics such as varying grain pattern, small

mineral streaks, knots, and slight color variations.

Because of this, our quality standards establish

tolerance ranges for matching the wood.

Cherry is a moderately hard wood, heavy and strong. It

is generally a straight grained, uniformly textured wood

characterized by its red undertones. Given that, it may

range in color from a light to dark reddish brown

heartwood with tones from greenish to white sapwood.

There is also a natural occurrence of small knots, pitch

pockets or wormholes in the surface of the wood.

Cherry is well known for its response to artificial and

natural light sources, developing a rich and lustrous

patina in the colors noted above. These variations are

often quite visible with natural or light finishes while

appearing less on darker stains, shielding the wood

from various light sources.

Maple is a hard and dense wood with a close grain that

is relatively subtle in appearance. The grain pattern may

vary from a tight vertical pattern to a wild arch-shape.

The color range runs from white to yellow and brown.

Marsh is very selective in this color range, ensuring the

brown portion to have a faint brown tint. Inherently,

there are fine honey-colored mineral and sugar streaks.

Maple will react to both natural and artificial light

sources, taking on a slightly subdued patina. When a

light finish is applied, these variations are visible and

should not be considered defects.

These variations are what create the unique

natural beauty of each piece. Additionally,

exposure to sunlight, smoke, and other chemical

agents can cause wood colors to change over

time. You are urged to make final selection of

specie and finish from a full size door sample.

Oak is an extremely hard wood with an open grain

pattern. The pattern may vary from a tight to wide

pattern with a coarse texture. In oak’s natural state,

colors may range from brownish with a red tinge to a

light yellow. When a light finish is applied, these

variations are visible and should not be considered a

defect.

Birch is a medium-hard wood with plain and closed

grain. The grain is often characterized as a curly or

wavy pattern. It is predominantly a light yellow wood

that takes stain very well. When a light finish is applied

these variations may be visible and should not be

considered a defect. When a dark stain is applied the

wavy and curly grain absorbs stain and reflects light in

such a manner as to enhance the natural characteristics

of the species and should not be considered a defect.

Thermofoil is Medium Density Fiberboard (MDF)

covered with a durable thermofoil laminate. The maple

wood frame is painted with a white paint to closely

match the laminate. You may notice some small seams

in the paint at the joints of the cabinetry face frame due

to expansion and contraction of the wood. This will not

affect the integrity of the cabinet or the finish.

Painted Wood differs from standard finishes. Wood products expand and contract due to changes in climatic

conditions. Some of the characteristics that are common and acceptable aspects of painted wood include

finish breaks, slight recesses, and seam lines at stile, rail, and panel joints. Joint separation may be more

apparent on mitered doors; therefore, opaque finishes are not recommended for use in environments of high

humidity. Since seam lines and variations are normal characteristics of opaque finishes, they will not be

considered reason for product replacement.

You may be required to sign a FINISH WAIVER FORM when ordering a painted product. Neither Marsh Furniture nor

your Marsh dealer can be responsible for these conditions.

High Point Cabinetry — Effective 03/07/2011

0.11

WOOD INFORMATION


0.12

CABINET SPECIFICATIONS

CABINET SPECIFICATIONS

Will refer to:

1. Cascade, Georgetown, Georgetown Arch, Dakota, Shaker, Mission, Windsor, and Rosehill

2. Manhattan

A Doors (1,2)

• Solid wood stiles and rails

• Wood veneer door panels

• Thermofoil Medium Density Fiberboard (MDF) door

selections

• Laminate door selections

B End Panels (1,2)

• Constructed of 5/8� industrial grade particleboard

• The exterior and interior of white door styles are white

melamine

• The exterior and interior will be natural maple

melamine on all wood lines

Top and Bottom Panels for Walls

• (1) Top and bottom panels are 3/4� industrial grade

particleboard

• (2) Top and bottom panels are 5/8� industrial grade

particleboard

• Panels are PVC edgebanded to match exterior of

cabinet

Bottom Panels for Bases (1,2)

• Bottom panels are 5/8� industrial grade particleboard

Back Panels for Walls (1,2)

• Back panels are 1/2� industrial grade particleboard

• Rear exterior is unfinished

Back Panels for Bases

• (1) Back panels are 1/4� industrial grade

particleboard, melamine clad on one side

• (2) Back panels are 1/2� industrial grade

particleboard melamine

• Rear exterior is unfinished

High Point Cabinetry — Effective 03/07/2011

C Shelves (1,2)

• Shelves are constructed of 5/8� industrial grade

particleboard for cabinets 24� high or taller

• Shelves are constructed of 3/4� industrial grade

particleboard for cabinets 33� wide or wider

• White melamine clad on white door styles

• Natural maple color melamine on all wood lines

• The front edges of shelves have PVC edge-banding

applied to match interior

• Base shelves are half-depth

• Wall shelves are 5/8� thick and adjustable in

3� increments

• 42� high Wall cabinets with two doors have a fixed

center shelf

D Hinges (1,2)

• 6-way fully concealed 120� self-closing cup hinges

allow easy height (vertical), side (horizontal) and

depth (in/out) adjustment

E Cabinet Interior (1,2)

• The standard cabinet interior is a melamine with a

natural wood grain print for all wood lines

• A white laminate interior will be used for white lines

and painted door styles in white

• Finished Interior Option (FI) — On wall, base and

tall cabinets up to 24� deep, the “FI” option can be

selected as an upgrade

• The cabinet interior will be a natural maple melamine

on all wood lines, white melamine on all white lines

• FI option on glazed cabinets will not be glazed but will

match the finish color

• Shelves in cabinets with the FI option will be PVC

edge banded to match


CABINET SPECIFICATIONS

Will refer to:

1. Cascade, Georgetown, Georgetown Arch, Dakota, Shaker, Mission, Windsor, and Rosehill

2. Manhattan

F Drawers (1,2)

• Drawers feature an epoxy coated steel, finished white

and natural

• Drawer bottoms are 1/2� thick and backs are 5/8�

thick matching melamine clad particleboard

• The guides feature self-closing, parallel-closure and a

positive stop

• Drawer guides are certified up to 75 lb.

Upgrade Options:

• 5/8� Wood dovetail drawer box with 3/4 extension

undermount guides

• 5/8� Wood dovetail drawer box with full extension

undermount Soft Close guide system

• Drawer sides, front and back, are constructed of

5/8� solid wood featuring dovetail construction

• Wood drawer bottoms are 1/4� wood veneer

• Drawer guides are certified up to 75 lbs.

G Base Stretcher Braces (1,2)

• 5/8� industrial grade particleboard

• The front brace is finished with white melamine on

white lines, natural maple color melamine for all wood

lines

• The back stretcher brace is unfinished

H Toe Kicks

• (1) The toe kick is inset into the cabinet box 1-3/4�

and is 4� high

• (2) The toe kick is inset into the cabinet box 3-1/2�

and is 4-1/2� high

• Toe kicks are 5/8� unfinished industrial grade

particleboard

• To finish the toe kick space, a TP overlay is required

(page 5.26)

— Options available are listed under each cabinet

A

D

D

F

H

E

C

G

High Point Cabinetry — Effective 03/07/2011

B

B

0.13

CABINET SPECIFICATIONS


CABINET DIMENSIONS

for Cascade, Georgetown, Georgetown Arch, Dakota, Shaker, Mission, Windsor and Rosehill

Wall Cabinets Wall Cabinets

2 adjustable shelves included on 30” & 36”

3 adjustable shelves included on 42” high

Base Cabinets / Base Height Vanities

4”

6 3/16”

24”

4”

Base Drawer

6 3/16”

6 3/16”

8 3/4”

8 3/4”

4”

30”

36”

34 1/2”

34 1/2”

1 adjustable shelf included

Utility Cabinets 84” High

18”

61 1/2”

4”

Vanity Base

6 3/16”

83 1/2”

30 3/4”

24”

27”

Utility Cabinets 90” High

24”

61 1/2”

4”

4” 4”

*** not to scale Inside measurements are for openings

20”

89 1/2”

Wall Cabinets

No shelves included

Utility Cabinets 96” High

Vanity Base Drawer Vanity File Drawer

8 3/4”

8 3/4”

8 3/4”

30 3/4”

30”

61 1/2”

4”

6 3/16”

6 3/16”

13 3/4”

4”

12”

15”

18”

21”

95 1/2”

30 3/4”

High Point Cabinetry — Effective 03/07/2011

0.15

CABINET SPECIFICATIONS


0.16

CABINET SPECIFICATIONS

CABINET DIMENSIONS

for Manhattan ONLY

42”

34 1/2”

34 1/2”

34 1/2”

2 adj. shelves

1 shelf fixed (center)

BASE CABINETS

5 3/4”

4 1/2”

Drawer Base Pot & Pan

5 3/4”

11 7/8”

11 7/8”

4 1/2”

Drawer Bases

Vanity Drawer Base Height

5 3/4”

5 3/4”

8 7/8”

8 7/8”

WALL CABINETS WALL CABINETS

23 7/8”

30”

&

36”

2 adj. shelves included

24”

&

27”

UTILITY CABINETS 84” HIGH

84”

31 1/2”

&

34 1/2”

4 1/2”

Vanity Lav/ Vanity

Drawer Lav

VLBase Height/

VDL Base Height

1 adj. shelf included

UTILITY CABINETS 90” HIGH

18” 24”

Vanity Drawer

12”

15”

18”

&

21”

no shelves

UTILITY CABINETS 96” HIGH

61 1/2” 61 1/2” 61 1/2”

Vanity File Drawer

4 1/2” 4 1/2” 4 1/2” 4 1/2”

4 1/2”

4 1/2”

5 3/4” 5 3/

4”

5 3/

4”

20 7/8”

90”

31 1/2”

*** not to scale Inside measurements are for openings

High Point Cabinetry — Effective 03/07/2011

10 3/8”

10 3/8”

96”

31 1/2”

5 3/4”

15”

30”


Construction Options

and Modifications

RD - Reduce Depth

AD - Added Depth

ND - No Doors

FI - Finished Interior

IA - Installed Accessories

FB - Finished Bottoms

Reference Modifications Table on Page 0.14

Features:

How to read item code:

WC 3030

Item

Width

Height

$

!

Option Chart Symbols

Standard

Available with an Upcharge

Available with Exceptions

Not Available

� Cabinet interior is laminate with a natural maple grain pattern. White interior will be

used on white cabinets.

� Hinges are fully concealed 6-way adjustable with a limited lifetime warranty from

manufacturer.

� Hinging must be specified left or right for Arch door styles. Right-hand hinging

standard on single door cabinets.

� Please refer to Cabinet References (page 0.7-0.9) for decorative hardware

requirements.

Options:

Available options are noted beside each cabinet.

� Depth Change: A reduction in 3� increments with 6� being minimum depth

allowable. Cabinets may be increased in 3� increments up to a maximum depth

of 24�.

� No Doors: Finished interior is not included standard in this option.

� Finished Interior: Glazed cabinets will not have a glazed interior.

� Finished Bottoms: Check Options Chart beside cabinet for availability.

High Point Cabinetry — 03/07/2011

WALLS


1.2 WALL CABINETS

WALLS

12"

12� Deep Wall Cabinets

12� HIGH

12"

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

Two doors, no shelves

30�, 36�, and 39� wide

15"

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

15� HIGH

12"

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

Two doors, no shelves

30�, 33�, 36�, and 39� wide

18”

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

18� HIGH

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

Two doors, no shelves

24�, 27�, 30�, 33�, 36�, and 39� wide

High Point Cabinetry — 03/07/2011

WC3012

WC3612

WC3912

WC3015

WC3315

WC3615

WC3915

WC2418

WC2718

WC3018

WC3318

WC3618

WC3918

WC3018MD

OPTIONS

RD

AD

FI

ND

21”

21� HIGH

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

Two doors, no shelves

30�, 33�, and 36� wide

24”

24� HIGH

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

Two doors, one adjustable shelf

24�, 27�, 30�, 33�, 36�, and 39� wide

27”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

27� HIGH

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

Two doors, one adjustable shelf

30� wide

AE

IA

BD

HA

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

WC3021

WC3321

WC3621

WC2424

WC2724

WC3024

WC3324

WC3624

WC3924

WC3027


� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

30”

30� HIGH

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

One door, two adjustable shelves

Specify RH or LH on Arch styles

9�, 12�, 15�, 18�, and 21� wide

30”

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

30� HIGH

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

Two doors, two adjustable shelves

24�, 27�, 30�, 33�, 36�, and 39� wide

WC930

WC1230

WC1530

WC1830

WC2130

WC1230GL

WC1530GL

WC1830GL

WC2130GL

WC1230MD

WC1530MD

WC1830MD

WC2130MD

WC2430

WC2730

WC3030

WC3330

WC3630

WC3930

WC2430GL

WC2730GL

WC3030GL

WC3330GL

WC3630GL

WC3930GL

WC2430MD

WC2730MD

WC3030MD

WC3330MD

WC3630MD

WC3930MD

OPTIONS

RD

AD

FI

ND

36”

36� HIGH

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

One door, two adjustable shelves

Specify RH or LH on Arch styles

9�, 12�, 15�, 18�, and 21� wide

36”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

36� HIGH

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

Two doors, two adjustable shelves

24�, 27�, 30�, 33�, and 36� wide

AE

IA

BD

HA

WALL CABINETS

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

WC936

WC1236

WC1536

WC1836

WC2136

WC1236GL

WC1536GL

WC1836GL

WC2136GL

WC1236MD

WC1536MD

WC1836MD

WC2136MD

WC2436

WC2736

WC3036

WC3336

WC3636

WC2436GL

WC2736GL

WC3036GL

WC3336GL

WC3636GL

WC2436MD

WC2736MD

WC3036MD

WC3336MD

WC3636MD

High Point Cabinetry — 03/07/2011

1.3

WALLS


1.4 WALL CABINETS

WALLS

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

42”

42� HIGH

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

One door, two adjustable shelves

Center shelf fixed for structural integrity

Specify RH or LH on Arch styles

9�, 12�, 15�, 18�, and 21� wide

42”

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

42� HIGH

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

Two doors, two adjustable shelves

Center shelf fixed for structural integrity

24�, 27�, 30�, 33�, and 36� wide

High Point Cabinetry — 03/07/2011

WC942

WC1242

WC1542

WC1842

WC2142

WC1242GL

WC1542GL

WC1842GL

WC2142GL

WC1242MD

WC1542MD

WC1842MD

WC2142MD

WC2442

WC2742

WC3042

WC3342

WC3642

WC2442GL

WC2742GL

WC3042GL

WC3342GL

WC3642GL

WC2442MD

WC2742MD

WC3042MD

WC3342MD

WC3642MD

OPTIONS

RD

AD

FI

ND

Wall Rack Cabinets

LATTICE WINE RACK CABINET

30” & 36”

18” & 24”

12”

RD AD FI FB ND IA BD

� � � □$ � � �

Not available unfinished

15”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

PLATE RACK CABINET

30”/36”

RD AD FI FB ND IA BD

� � � □$ � � �

AE

IA

BD

HA

Number

of

A B Bottles

WRC1830E 18” 30” 11

WRC3018E 30” 18” 11

WRC2430E 24” 30” 17

WRC2436E 24” 36” 23

12”

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

WRC2430E

WRC2436E

WRC1830E

WRC3018E

WC3015PRE

WC3615PRE

Accommodates 10� plates

Four front dowels removable for cleaning

Finished interior

Increasing depth is not recommended as it will allow plates to roll back too far


� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Refrigerator Wall Cabinets

24� DEEP

12”/15”/18”/

21”/24”

30”/33”/36”/

39”/42”/48”*

24”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

For use over refrigerators

FI available on cabinets with no doors only

48� has four doors

RW3012

RW3312

RW3612

RW3912

RW4212

RW4812

RW3015

RW3315

RW3615

RW3915

RW4215

RW4815

RW3018

RW3318

RW3618

RW3918

RW4218

RW4818

RW3021

RW3321

RW3621

RW3921

RW4221

RW4821

RW3024

RW3324

RW3624

RW3924

RW4224

RW4824

OPTIONS

RD

AD

FI

ND

24”

24� Deep Wall Cabinets

24� DEEP

24”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

Two doors

For use over refrigerators

FI available on cabinets with no doors only

36� and 39� wide

Wall Corner Cabinets

30� HIGH

30”/36”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

AE

IA

BD

HA

One door, two adjustable shelves

Specify RH or LH on Arch styles

24�, 30�, and 36� wide have only one door as shown

14-7/8� wide fixed panel

FI available on cabinets with no doors only

WALL CABINETS

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

WC362424

WC392424

WCC2430

WCC3030

WCC3630

High Point Cabinetry — 03/07/2011

1.5

WALLS


1.6 WALL CABINETS

WALLS

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

36� HIGH

See drawing/options on page 1.5 WCC2436

30”

30� HIGH

42”

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

Two doors, two adjustable shelves

14-7/8� wide fixed panel

FI available on cabinets with no doors only

42”

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

42� HIGH

12”

RD AD FI FB ND IA BD

□$ □$ □$ □$ □$ � �

One door, two adjustable shelves

Center shelf fixed for structural integrity

Specify RH or LH on Arch styles

FI available on cabinets with no doors only

14-7/8� wide fixed panel has one door

24�, 30�, and 36� wide

High Point Cabinetry — 03/07/2011

WCC3036

WCC3636

WCC4230

WCC2442

WCC3042

WCC3642

OPTIONS

RD

AD

FI

ND

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

Diagonal Wall Cabinets

30� & 36� HIGH

30”/36”

12 1/4”/15 1/4”

24”/27”

24”/27”

RD AD FI FB ND IA BD

� � □$ □$ □$ □$ �

One door, two adjustable shelves

Specify RH or LH on Arch styles

CWC cabinets have the ends already finished

42� HIGH

24”/27”

42”

12 1/4”/15 1/4”

24”/27”

RD AD FI FB ND IA BD

� � □$ □$ □$ □$ �

AE

IA

BD

HA

One door, two adjustable shelves

Center shelf fixed for structural integrity

Specify RH or LH on Arch styles

CWC cabinets have the ends already finished

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

CWC2430

CWC2730

CWC2436

CWC2736

CWC2430GL

CWC2730GL

CWC2436GL

CWC2736GL

CWC2430MD

CWC2730MD

CWC2436MD

CWC2736MD

CWC2442

CWC2742

CWC2442GL

CWC2742GL

CWC2442MD

CWC2742MD


� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

30”/

36”

Wall End Angled

30� & 36� HIGH

12” 12”

RD AD FI FB ND IA BD

� � □$ � □$ � �

Two doors, two fixed shelves

42”

42� HIGH

12”

12”

RD AD FI FB ND IA BD

� � □$ � □$ � �

Two doors, three fixed shelves

30”/

36”

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

WEC1230

WEC1236

WEC1230GL

WEC1236GL

WEC1242

WEC1242GL

30� & 36� HIGH (MANHATTAN CONSTRUCTION)

12” 12”

RD AD FI FB ND IA BD

� � □$ � □$ � �

Two doors, two fixed shelves

WEA1230

WEA1236

OPTIONS

RD

AD

FI

ND

42”

42� HIGH (MANHATTAN CONSTRUCTION)

12”

12”

RD AD FI FB ND IA BD

� � □$ � □$ � �

Two doors, three fixed shelves

30”/

36”

Wall End Cabinets

WEA1242

30� & 36� HIGH (MANHATTAN CONSTRUCTION)

12”

12”

RD AD FI FB ND IA BD

� � □$ � □$ � �

One door, two fixed shelves

Specify RH or LH

42”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

WEC1230

WEC1236

42� HIGH (MANHATTAN CONSTRUCTION)

12”

12”

RD AD FI FB ND IA BD

� � □$ � □$ � �

One door, three fixed shelves

Specify RH or LH

AE

IA

BD

HA

WALL CABINETS

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

WEC1242

High Point Cabinetry — 03/07/2011

1.7

WALLS


1.8 WALL CABINETS

WALLS

21”

Microwave Wall Cabinets

21� HIGH

17 3/8”

30”

28 3/4”

RD AD FI FB ND IA BD

� � � � � � �

12”

19 3/4”

opening

Interior is veneered to match the exterior

30”

&

36”

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

30� & 36� HIGH

17 3/8”

27” & 30”

25 3/4”

&

28 3/4”

12”

17 3/8”

opening

RD AD FI FB ND IA BD

� � □$ � □$ � �

Two doors, no shelves

High Point Cabinetry — 03/07/2011

WCM3021

WCMW2730

WCMW3030

WCMW2736

WCMW3036

OPTIONS

RD

AD

FI

ND

42”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

42� HIGH

27” & 30”

17 3/8”

25 3/4”

&

28 3/4”

RD AD FI FB ND IA BD

� � □$ � □$ � �

Two doors, one adjustable shelf

AE

IA

BD

HA

12”

17 3/8”

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

WCMW2742

WCMW3042


42”

CORNER SHELF TOP PLATE

6”

LH as shown

12”

RH as shown

12”

6”

30”/

36”

CS630

CS636

CS642

CSTP126

Designate LH or RH when ordering ALL white lines

In white lines, edges of the shelves are profiled

CSTP126 has a square top shelf for use with crown moldings, and is finished on

both sides (not pictured)

BOOKCASES

24”, 30”, 36”

48”/

52”/

58”

Fixed shelf has a 2 3/4”

facia board on front

Fixed shelf

has a 2 3/4”

facia board

on front

17 1/2”

from bottom

of facia board

to countertop

12”

12”

Bookcases have

a finished interior

and exterior.

Bottom shelf is

stationary and

other 2 shelves

are adjustable.

17 1/2”

from bottom

of facia board

to countertop

24”, 30”, 36”

Fixed bottom shelf and two adjustable shelves in 48�/52�/58� high

Fixed bottom shelf and three adjustable shelves in 64� high

Interior is finished to match exterior

6”

6”

DESK ORGANIZERS

36”

30”

12”

12”

Interior finished to match exterior

WALL ACCESSORIES

64”

BC2448E

BC3048E

BC3648E

BC2452E

BC3052E

BC3652E

BC2458E

BC3058E

BC3658E

BC2464E

BC3064E

BC3664E

DO30

DO36

High Point Cabinetry — Effective 03/07/2011

1.9

WALLS


1.10 WALL ACCESSORIES

WALLS

6”

SPICE DRAWER CABINET, WINE CUBE CABINET

18”, 24”,

30”, 36”, 42”

5 3/4”

12”

Cabinet shown horizontal with

one spice drawer box, SPDBX

12”

6”

18”,

24”,

30”,

36”,

42”

5 3/4”

SPWC18

SPWC24

SPWC30

SPWC36

SPWC42

SPDBX

*Specify species; M=Maple, C=Cherry

18� wide spice drawer cabinet accepts three spice drawer boxes,

24� wide accepts four boxes,

30� wide accepts five boxes,

36� wide accepts six boxes, and

42� wide accepts seven boxes

Boxes to be ordered separately as SPDBX

Available in all finishes

Finished both ends

Not intended for end of run (staples and pinholes will show)

Finished on side, top, and bottom

Drawer boxes are ordered by door style

SCALLOPED WINE RACK

36”

36”

Scalloped wood

Trim in 3� increments

2 1/2”

STEMWARE HOLDER

11 3/4”

36”

1 5/8”

3-1/4� Moldings are mounted on 4� centers

WR

SH

High Point Cabinetry — Effective 03/07/2011

18”

CORNER APPLIANCE HUTCH

12 1/4”

24”

Finished on interior and exterior

18”

CAH

CORNER APPLIANCE HUTCH

(MANHATTAN CONSTRUCTION)

12 1/4”

24”

Finished on interior and exterior

CAH

ROUND LAZY SUSAN SHELVES

For use in diagonal corner wall cabinets

Designate White (W) or Almond (A) when ordering

CAHX

CAHE

2 - 20� Diagonal RLS30

2 - 20� Diagonal RLS36

3 - 20� Diagonal RLS42


Construction Options

and Modifications

WD - Wood Dovetail Drawer

FX - Wood Dovetail Drawer with

Soft Close Feature

RD - Reduce Depth

AD - Added Depth

ND - No Doors/No Drawers

FI - Finished Interior

IA - Installed Accessories

BD - Bottom Drawers

Reference Modifications Table on Page 0.14

Features:

Base Cabinets

How to read item code:

PB 30

Item

Width

$

!

Option Chart Symbols

Standard

Available with an Upcharge

Available with Exceptions

Not Available

� Cabinet interior is laminate with a natural maple grain pattern. White interior will be

used on white cabinets.

� Hinges are fully concealed 6-way adjustable with a limited lifetime warranty from

manufacturer.

� Right-hand hinging standard on single door cabinets.

� Arch door styles not available in base cabinets.

� Drawer cabinets with a reduced depth of more than 18� will receive a vent unless

upgraded to FX.

� Standard cabinet has a 3/4 extension integrated metal sided drawer.

� Shelves are half-depth.

� Cabinets have unfinished toe kick. A Toe Plate (TP) must be ordered to finish.

� Please refer to Cabinet References (page 0.7-0.9) for decorative hardware

requirements.

Options:

Available options are noted beside each cabinet.

� Depth Change: A reduction in 3� increments with 12� being minimum depth allowable.

� No Doors: Finished Interior is not included standard in this option.

� Finished Interior: Glazed cabinets will not have a glazed interior.

� Bottom Drawers: Check Options Chart beside cabinet for availability.

High Point Cabinetry — 03/07/2011

BASES


2.2 BASE CABINETS

BASES

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

TRAY BASE

34 1/2”

9”

For price columns 1-6 only

34 1/2”

9”

24”

24”

For price columns 7 and 8 only

Solid top

Will accommodate BPO5 accessory

RD AD FI FB ND IA BD

□$ □$ □$ � □$ � �

One door, no shelves

PANTRY BASES

34 1/2”

24”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ □$ □$

One door, one drawer, one full-depth shelf

12�, 15�, 18�, and 21� wide

High Point Cabinetry — 03/07/2011

TB9

PB12

PB15

PB18

PB21

OPTIONS

RD

AD

FI

ND

PANTRY BASES

34 1/2”

24”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ □$ □$

Two doors, one drawer, one full-depth shelf

24�, 27�, and 30� wide

PANTRY BASES

34 1/2”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

RD AD FI FB ND IA BD

□$ □$ □$ � □$ □$ □$

AE

IA

BD

HA

24”

Two doors, two drawers, one full-depth shelf

33�, 36�, and 39� wide

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

PB24

PB27

PB30

PB33

PB36

PB39


� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

BURNER SINK BASE

34 1/2”

For price columns 1-6 only

Two full-height doors

Blind apron

34 1/2”

24”

For price columns 7 and 8 only

24”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ □$ �

Two doors, one vent, no shelves

24�, 27�, 30�, 33�, 36�, 39� and 42� wide

DRAWER BASES

34 1/2”

24”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ □$ �

Four drawers

12�, 15�, 18�, 21�, 24�, and 30� wide

Two shallow height drawers, two deep drawers

BSB24

BSB27

BSB30

BSB33

BSB36

BSB39

BSB42

DB12

DB15

DB18

DB21

DB24

DB30

OPTIONS

RD

AD

FI

ND

POT & PAN DRAWER BASE

34 1/2”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

24”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ □$ �

Three drawers

30� and 36� wide

Top drawer is shallow

Bottom two drawers are deep

AE

IA

BD

HA

BASE CABINETS

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

DBP30

DBP36

High Point Cabinetry — 03/07/2011

2.3

BASES


2.4 BASE CABINETS

BASES

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

BLIND BASE CABINETS

RD AD FI FB ND IA BD

□$ □$ □$ � □$ □$ �

One door, one drawer, one full-depth shelf

39�, 42�, 45�, and 48� wide

Use filler on adjacent wall

High Point Cabinetry — 03/07/2011

PBC39L

PBC39R

PBC42L

PBC42R

PBC45L

PBC45R

PBC48L

PBC48R

OPTIONS

RD

AD

FI

ND

LAZY SUSAN CORNER BASES

34 1/2”

34 5/8” 34 5/8”

Toe Plates shipped loose

RD AD FI FB ND IA BD

� � □$ � � □$ �

LSCB3636

Requires 36� wall space

Sets 1-3/8� from rear walls

Frameless Corner Base Ends (except white lines) need finished ends called out

in R or L where base end is exposed and not connected to adjacent base

Comes with four leveler legs and loose toe plate

LAZY SUSAN CORNER BASES

(MANHATTAN CONSTRUCTION)

34 1/2”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

24”

33”/36”

33”/36”

RD AD FI FB ND IA BD

� � □$ � � □$ �

AE

IA

BD

HA

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

LSCB3333

LSCB3636

Requires 33�/36� wall space

Frameless Corner Base Ends (except white lines) need finished ends called out

in R or L where base end is exposed and not connected to adjacent base

Comes with two leveler legs and toe plate attached


� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

EASY REACH CORNER BASES

34 1/2”

34 5/8”

22 5/8”

RD AD FI FB ND IA BD

� � □$ � � � □$

34 5/8”

EZCB3636

Requires 36� wall space

Sets 1-3/8� from rear walls

Shelf is not adjustable and can not be ordered separately

Toe Plates shipped loose

Frameless Corner Base Ends (except white lines) need finished ends called out

in R or L where base end is exposed and not connected to adjacent base

Comes with four leveler legs and loose toe plate

EASY REACH CORNER BASES

(MANHATTAN CONSTRUCTION)

34 1/2”

24”

33”/36”

33”/36”

RD AD FI FB ND IA BD

� � □$ � � □$ �

EZCB3333

EZCB3636

Requires 33/36� wall space

Shelf is adjustable

Frameless Corner Base Ends (except white lines) need finished ends called out

in R or L where base end is exposed and not connected to adjacent base

Comes with two leveler legs and toe plate attached

OPTIONS

RD

AD

FI

ND

BASE END CABINET

34 1/2”

24”

24”

24” 24”

23 3/8”

RD AD FI FB ND IA BD

� � □$ � □$ � �

Two doors, one adjustable shelf

34 1/2”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

BASE TRANSITIONAL CABINETS

12”

12”

24”

RD AD FI FB ND IA BD

� � □$ � □$ � �

AE

IA

BD

HA

12”

12”

BASE CABINETS

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

24”

BEC24

BTC12L

BTC12R

One door, one shelf

LH shown

The left or right hand is determined by which side the short end is located

High Point Cabinetry — 03/07/2011

2.5

BASES


2.6 BASE CABINETS

BASES

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

TWO FACED ISLAND BASES

34 1/2”

RD AD FI FB ND IA BD

□$ □$ □$ � � � □$

24”

2FIB24

2FIB30

Two doors each side

One drawer and two doors on one side, two full-height doors on other side

There is a dividing panel in center of cabinet for structural purposes

One adjustable shelf on each side

RT not available on 2FIB bases

TWO FACED ISLAND BASES

(MANHATTAN CONSTRUCTION)

34 1/2”

24”/30”

RD AD FI FB ND IA BD

□$ □$ □$ � � � □$

24”

2FIB24

2FIB30

Two doors each side

One drawer and two doors on one side, vent and two doors on other side

There is a dividing panel in the center of cabinet for structural purposes

One adjustable shelf on each side

RT not available on 2FIB bases

High Point Cabinetry — 03/07/2011

OPTIONS

RD

AD

FI

ND

TWO FACED ISLAND BASES

34 1/2”

RD AD FI FB ND IA BD

□$ □$ □$ � � � □$

24”

2FIB36

Two doors each side

Two drawers and two doors on one side, two full-height doors on other side

There is a dividing panel in center of cabinet for structural purposes

One adjustable shelf on each side

RT not available on 2FIB bases

TWO FACED ISLAND BASES

(MANHATTAN CONSTRUCTION)

34 1/2”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

36”

RD AD FI FB ND IA BD

□$ □$ □$ � � � □$

24”

2FIB36

Two doors each side

Two drawers and two doors on one side, vent and two doors on other side

There is a dividing panel in the center of cabinet for structural purposes

One adjustable shelf on each side

RT not available on 2FIB bases

BASE END SHELF

34 1/2”

12”

24”

11-1/4” Radius

Shipped ready-to-assemble

Can be assembled right or left

AE

IA

BD

HA

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

BES1224


� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

CORNER SINK FRONTS

34 1/2”

16 1/2”

36” or 42”

36” or 42”

24”

34 1/2”

24”

Top View

CSF165 bridges 36� x 36� opening

CSF255 bridges 42� x 42� opening

Toe plates shipped loose

BASE SINK FRONT

34 1/2”

15” & 21”

One door, one vent

25 1/2”

4 7/8”

CSF165

CSF255

BSF15

BSF21

OPTIONS

RD

AD

FI

ND

BASE SINK FRONT

34 1/2”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

24”, 27”, 30”,

33” & 36”

Two doors, one vent

SINK FRONT FLOORS

AE

IA

BD

HA

Not shown

3/8� Fiberboard - stained two sides

48� X 23-1/4�

42� X 42�

BASE CABINETS

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

4 7/8”

BSF24

BSF27

BSF30

BSF33

BSF36

SFF4824

SFF4242

High Point Cabinetry — 03/07/2011

2.7

BASES


2.8 ROLL OUT TRAYS

BASES

ROLL OUT TRAYS

Order RTU same size as cabinet

One unit packed per box

Standard RTU’s are 7mil miter-fold

vinyl tray with 2-1/2� sides

Color will be natural maple for wood

lines and white for white lines

Designed for pantry base and utility

cabinets that are 24� deep ONLY

Will not fit vanity cabinets

Pilasters are 20� tall and sit 1/4� from

bottom of cabinet

Accommodates three roll outs max

per pilaster

50 lb. capacity per tray

RT12

RT15

RT18

RT21

RT24

RT27

High Point Cabinetry — Effective 03/07/2011

WOOD ROLL OUT TRAYS

Order WDRTU same size as cabinet

One unit packed per box

Wood RT’s are a maple wood tray

with 2-1/2� sides

Designed for pantry base and utility

cabinets that are 24� deep ONLY

Will not fit vanity cabinets

Pilasters are 20� tall and sit 1/4� from

bottom of cabinet

Accommodates three roll outs max

per pilaster

All mounting fixtures included

50 lb. capacity per tray

WRT12

WRT15

WRT18

WRT21

WRT24

WRT27

WRT30

WRT33

WRT36


SINGLE WASTE BASKET FOR 24� DEEP BASE

10 3/4”

36 Qt

SWB fits all base cabinets 12� wide and larger

Does not fit TB9, PB21, or PB24

SWB

DOUBLE WASTE BASKET FOR 24� DEEP BASE

11 5/8”

27 Qt per container

Fits bases that are 15� wide and larger

Does not fit TB9, PB12, PB24, or PB27

DWB

DOOR MOUNTING KIT FOR 24� DEEP BASE

Drawing not shown

35 QT SINGLE WASTE BIN

22 5/8”

35 qt

container

included

6” Dove-tailed construction

19 1/4”

12”

Full ext for PB15 and up

Will not work in PB27; opening is too small

All mounting hardware and DMK included

Features soft-close open & close

DMK

WDSWB35

35 QT DOUBLE WASTE BIN

22 5/8”

2 - 35 qt

containers

included

6” Dove-tailed construction

19 1/4”

14 1/4”

Full ext for PB18 and up

Will not work in PB30; opening is too small

All mounting hardware and DMK included

Features soft-close open & close

CUTLERY TRAY

Plastic - 16� x 21�

Trim to fit drawers in 18� base cabinets

BASE ACCESSORIES

WDDWB35

CT18

High Point Cabinetry — Effective 03/07/2011

2.9

BASES


2.10 BASE ACCESSORIES

BASES

B

DRAWER INSERT ACCESSORIES

14� Wood Cutlery Tray

For use in 15� and 18� cabinets

20� Wood Cutlery Tray

For use in 21� and 24� cabinets

18� Wood Utility Tray

For use in 12�, 18�, 21�, and 24� cabinets

18� Spice Drawer Insert

For use in 18� and 21� cabinets

A

Right Pull

C

Left-hand corner

base shown

Framed Cabinet

WDCT14

WDCT20

WDUT18

WDSI18

A

Left Pull

Right-hand corner

base shown

High Point Cabinetry — Effective 03/07/2011

C

B

CORNER PULLOUT ORGANIZERS

LeMans Corner Pullout - R (Right Pull)

LeMans Corner Pullout - L (Left Pull)

Will work in both framed and frameless cabinets

See drawing and chart below

A B

Framed Cabinet

C

LBCP4851R

LBCP4851L

Frameless Cabinet

INCHES (mm) INCHES (mm) INCHES (mm) INCHES (mm)

min. 33-1/2 (851) min. 21 (533) 15-16 (381-406) 16-17 (406-432)

min. 34-1/2 (876) min. 21 (533) 18-19 (457-483) 19-20 (483-508)

min. 39-1/2 (1003) min. 21 (533) 21-22 (533-559) 22-23 (559-584)

Inside dimension (clearance height) for all cabinets: min. 28 inches (711 mm)

C


Construction Options

and Modifications

WD - Wood Dovetail Drawer

FX - Wood Dovetail Drawer with

Soft Close Feature

RD - Reduce Depth

AD - Added Depth

ND - No Doors/No Drawers

FI - Finished Interior

IA - Installed Accessories

BD - Bottom Drawers

Reference Modifications Table on Page 0.14

Features:

Tall Cabinets

How to read item code:

$

!

UC 158424

Item

Width Depth

Standard

Height

Option Chart Symbols

Available with an Upcharge

Available with Exceptions

Not Available

� Cabinet interior is laminate with a natural maple grain pattern. White interior will be

used on white cabinets.

� Hinges are fully concealed 6-way adjustable with a limited lifetime warranty from

manufacturer.

� Right-hand hinging standard on single door cabinets.

� For Oven Cabinets (OC) with drawers, standard drawer is 3/4 extension metal

sided drawer.

� Bottom doors will not be Arch door style.

� Shelves are full depth.

� Cabinets have unfinished toe kick. A Toe Plate (TP) must be ordered to finish.

� Please refer to Cabinet References (page 0.7-0.9) for decorative hardware

requirements.

Options:

Available options are noted beside each cabinet.

� Depth Change: A reduction in 3� increments with 12� being minimum depth allowable.

� No Doors: Finished interior is not included standard in this option.

� Finished Interior: Glazed cabinets will not have a glazed interior.

� Bottom Drawers: Check Options Chart beside cabinet for availability.

High Point Cabinetry — 03/07/2011

TALLS


3.2 TALL CABINETS

TALLS

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Utility Cabinets

12� DEEP

83 1/2”

89 1/2”

95 1/2”

18”

12” / 24”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ □$ �

18� wide

96� high cabinet shown hinged RH

84� high has one fixed shelf only

90� high has one fixed shelf and one adjustable shelf

96� high has one fixed shelf and two adjustable shelves

Shelf kits available at additional cost

24� DEEP

UC188412

UC189012

UC189612

See drawing/options above UC188424

High Point Cabinetry — 03/07/2011

UC189024

UC189624

OPTIONS

RD

AD

FI

ND

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

12� DEEP (MANHATTAN CONSTRUCTION)

15” & 18”

84”

90”

96”

12” / 24”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ □$ �

AE

IA

BD

HA

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

15�/18� wide

96� high cabinet shown hinged RH

84� high has one fixed shelf only

90� high has one fixed shelf and one adjustable shelf

96� high has one fixed shelf and two adjustable shelves

Shelf kits available at additional cost

UC158412

UC159012

UC159612

UC188412

UC189012

UC189612

24� DEEP (MANHATTAN CONSTRUCTION)

See drawing/options above UC158424

UC159024

UC159624

UC188424

UC189024

UC189624


� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

12� DEEP

83 1/2”

89 1/2”

95 1/2”

24”

24”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ □$ �

24� wide

84� high has one fixed shelf only

90� high has one fixed shelf and one adjustable shelf

96� high has one fixed shelf and two adjustable shelves

Shelf kits available at additional cost

24� DEEP

UC248412

UC249012

UC249612

See drawing/options above UC248424

UC249024

UC249624

OPTIONS

RD

AD

FI

ND

12� DEEP (MANHATTAN CONSTRUCTION)

24”, 30” & 36”

84”

90”

96”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

12” & 24”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ □$ �

AE

IA

BD

HA

TALL CABINETS

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

24�/30�/36� wide

84� high has one fixed shelf only

90� high has one fixed shelf and one adjustable shelf

96� high has one fixed shelf and two adjustable shelves

Shelf kits available at additional cost

UC248412

UC249012

UC249612

UC308412

UC309012

UC309612

UC368412

UC369012

UC369612

24� DEEP (MANHATTAN CONSTRUCTION)

See drawing/options above UC248424

UC249024

UC249624

UC308424

UC309024

UC309624

UC368424

UC369024

UC369624

High Point Cabinetry — 03/07/2011

3.3

TALLS


3.4 TALL CABINETS

TALLS

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Oven Cabinets

OVEN CABINETS - WHITE LINES

30” / 33”

83 1/2”

89 1/2”

95 1/2”

24”

RD AD FI FB ND IA BD

� � □$ � � � �

OC3084

OC3384

OC3090

OC3390

OC3096

OC3396

Shown with panel partially removed for oven installation

84� high has no shelf

90� high has one adjustable shelf and one fixed shelf

96� high has two adjustable shelves and one fixed shelf

Frameless Front Panel removable for routing to fit oven and drawer kit

Ledger support included

Does not include drawer kits

Panel shipped unattached; packed with cabinet

Solid panel shaped on all four edges from bottom of door to top of toe kick

OVEN CABINETS (MANHATTAN CONSTRUCTION)

30” / 33”

84”

90”

96”

24”

RD AD FI FB ND IA BD

� � □$ � � � �

OC3084

OC3384

OC3090

OC3390

OC3096

OC3396

Shown with panel partially removed for oven installation

84� high has no shelf

90� high has one adjustable shelf and one fixed shelf

96� high has two adjustable shelves and one fixed shelf

Frameless Front Panel removable for routing to fit oven and drawer kit

Ledger support included

Does not include drawer kits

High Point Cabinetry — 03/07/2011

OPTIONS

RD

AD

FI

ND

OVEN DRAWER KITS

6 3/16”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

30” / 33”

ODK30

ODK33

OVEN DRAWER KITS (MANHATTAN CONSTRUCTION)

5 3/4”

30” / 33”

AE

IA

BD

HA

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

ODK30

ODK33


� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

30� WIDE - WOOD LINES

48 9/16”

54 15/16”

42 1/4”

30”

25”

Opening

OC (T) - 3 Drawers

OC (D) - 2 Drawers

OC (S) - 1 Drawer

RD AD FI FB ND IA BD

� � □$ � � � �

83 1/2” /

89 1/2” /

95 1/2”

84� OC3084S

84� OC3084D

84� OC3084T

90� OC3090S

90� OC3090D

90� OC3090T

96� OC3096S

96� OC3096D

96� OC3096T

Please specify Single (S), Double (D), or Triple (T) drawers when ordering

Not available in white lines

OPTIONS

RD

AD

FI

ND

33� WIDE - WOOD LINES

48 9/16”

54 15/16”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

42 1/4”

33”

28”

Opening

OC (T) - 3 Drawers

OC (D) - 2 Drawers

OC (S) - 1 Drawer

RD AD FI FB ND IA BD

� � □$ � � � �

AE

IA

BD

HA

TALL CABINETS

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

83 1/2” /

89 1/2” /

95 1/2”

84� OC3384S

84� OC3384D

84� OC3384T

90� OC3390S

90� OC3390D

90� OC3390T

96� OC3396S

96� OC3396D

96� OC3396T

Please specify Single (S), Double (D), or Triple (T) drawers when ordering

Not available in white lines

High Point Cabinetry — 03/07/2011

3.5

TALLS


3.6 TALL ACCESSORIES

TALLS

SHELF KITS FOR UTILITY CABINETS

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

SHELF KITS FOR UTILITY CABINETS

(MANHATTAN CONSTRUCTION)

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

High Point Cabinetry — Effective 03/07/2011

UC3S1812X

UC3S1824X

UC3S2412X

UC3S2424X

UC3S1512

UC3S1524

UC3S1812

UC3S1824

UC3S2412

UC3S2424

UC3S3012

UC3S3024

UC3S3612

UC3S3624

PANTRY ROLL OUTS

Fits UC1824

Mount left or right side of cabinet

Baskets are 3� apart

Available in white only

Fits UC2424

Mount in center only

Baskets are 3� apart

Available in white only

White PROS

White PROD


Construction Options

and Modifications

WD - Wood Dovetail Drawer

FX - Wood Dovetail Drawer with

Soft Close Feature

RD - Reduce Depth

AD - Added Depth

ND - No Doors/No Drawers

FI - Finished Interior

IA - Installed Accessories

BD - Bottom Drawer

Reference Modifications Table on Page 0.14

Features:

Vanity Cabinets

How to read item code:

$

!

VDL 12BH

Item

Standard

Width

Height

Option Chart Symbols

Available with an Upcharge

Available with Exceptions

Not Available

� Cabinet interior is laminate with a natural maple grain pattern. White interior will be

used on white cabinets.

� Hinges are fully concealed 6-way adjustable with a limited lifetime warranty from

manufacturer.

� Manhattan vanity cabinets are 31-1/2� high standard and 34-1/2� high for Base

Height (BH); all other vanity cabinets are 30-1/2� high standard and 34-1/2� high for

Base Height (BH).

� Hinging must be specified left or right. Right-hand hinging standard on single door

cabinets.

� Arch door styles not available in vanity cabinets.

� Drawer cabinets with a reduced depth of more than 18� will receive a vent unless

upgraded to FX.

� Standard cabinet has a 3/4 extension integrated metal sided drawer.

� Shelves are half-depth.

� Cabinets have unfinished toe kick. A Toe Plate (TP) must be ordered to finish.

� Please refer to Cabinet References (page 0.7-0.9) for decorative hardware

requirements.

Options:

Available options are noted beside each cabinet.

� Depth Change: A reduction in 3� increments with 12� being minimum depth allowable.

� No Doors: Finished interior is not included standard in this option.

� Finished Interior: Glazed cabinets will not have a glazed interior.

� Bottom Drawers: Check Options Chart beside cabinet for availability.

High Point Cabinetry — 03/07/2011

VANITIES


4.2 VANITY CABINETS

VANITIES

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

21� Deep Vanities

31-1/2� HIGH (MANHATTAN CONSTRUCTION)

31 1/2”

18”

16”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ � �

One door, one vent

30-3/4� HIGH

30 3/4”

21”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ � �

VENT

WITH

VERTICAL

BRACE

One full-height door, no drawers, no shelves

VL1816

VL21L

VL21R

31-1/2� HIGH (MANHATTAN CONSTRUCTION)

31 1/2”

21” 21”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ � �

One door, one vent, no shelves

VENT

WITH

VERTICAL

BRACE

High Point Cabinetry — 03/07/2011

VL21

OPTIONS

RD

AD

FI

ND

30-3/4� HIGH

30 3/4”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ � �

Two full-height doors, no drawers, no shelves

24�, 27�, 30�, 33�, and 36� wide

VL24

VL27

VL30

VL33

VL36

31-1/2� HIGH (MANHATTAN CONSTRUCTION)

24”, 27”, 30”,

33” & 36”

31 1/2”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ � �

Two doors, one vent, no shelves

34-1/2� HIGH

34 1/2”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

RD AD FI FB ND IA BD

□$ □$ □$ � � □$ �

Two full height doors, no shelves

24�, 27�, 30�, 33�, and 36� wide

AE

IA

BD

HA

VENT

WITH

VERTICAL

BRACE

21”

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

VL24

VL27

VL30

VL33

VL36

VL24BH

VL27BH

VL30BH

VL33BH

VL36BH


� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

34-1/2� HIGH (MANHATTAN CONSTRUCTION)

34 1/2”

24”, 27”, 30”,

33” & 36”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � � □$ �

Two doors, one vent, no shelves

30-3/4� HIGH

30 3/4”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ � �

One door, one drawer, no shelves

12�, 15�, and 18� wide

All hinged RH (door reversible)

Vent &

Vertical

Brace

VL24BH

VL27BH

VL30BH

VL33BH

VL36BH

VDL12

VDL15

VDL18

31-1/2� HIGH (MANHATTAN CONSTRUCTION)

12”, 15” & 18”

31 1/2”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � □$ � �

One door, one drawer, no shelf

All hinged RH (door reversible)

VDL12

VDL15

VDL18

OPTIONS

RD

AD

FI

ND

34-1/2� HIGH

34 1/2”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � � □$ □$

One door, one drawer, no shelves

12�, 15�, and 18� wide

Drawer is shallow height

All hinged RH (door reversible)

VDL12BH

VDL15BH

VDL18BH

34-1/2� HIGH (MANHATTAN CONSTRUCTION)

34 1/2”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

12”, 15“ & 18”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � � □$ □$

One door, one drawer, no shelves

Drawer is shallow height

All hinged RH (door reversible)

VANITY CABINETS

AE

IA

BD

HA

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

VDL12BH

VDL15BH

VDL18BH

High Point Cabinetry — 03/07/2011

4.3

VANITIES


4.4 VANITY CABINETS

VANITIES

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

30-3/4� HIGH

30 3/4”

30” / 36”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

VDL30L

VDL30R

VSD36L

VSD36R

One door, two drawers, no shelves

False front above door and drawers

The basis for determining RH or LH for this cabinet is based on the location of

the door. If the door is on the right side of the cabinet and the stack of drawers

is on the left side, it would be ordered as a RH cabinet (LH shown)

31-1/2� HIGH (MANHATTAN CONSTRUCTION)

31 1/2”

30”/36”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

21”

VDL30L

VDL30R

VSD36L

VSD36R

One door, two drawers, one vent, no shelves

False front above door and drawers

The basis for determining RH or LH for this cabinet is based on the location of

the door. If the door is on the right side of the cabinet and the stack of drawers

is on the left side, it would be ordered as a RH cabinet (as shown)

High Point Cabinetry — 03/07/2011

OPTIONS

RD

AD

FI

ND

34-1/2� HIGH

34 1/2”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

One door, three drawers, one vent, no shelves

LH as shown

30� and 36� wide

False front above door and drawers

One drawer is shallow height and two drawers are tall height

21”

VDL30BHL

VDL30BHR

VSD36BHL

VSD36BHR

34-1/2� HIGH (MANHATTAN CONSTRUCTION)

34 1/2”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

21”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

AE

IA

BD

HA

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

One door, three drawers, one vent, no shelves

RH as shown

30� and 36� wide

False front above door and drawers

One drawer is shallow height and two drawers are tall height

VDL30BHL

VDL30BHR

VSD36BHL

VSD36BHR


� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

30-3/4� HIGH

30 3/4”

36” / 42”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

Two doors, two drawers, no shelves

Drawers are shallow height

False front between drawers

21”

VDL36

VDL42

31-1/2� HIGH (MANHATTAN CONSTRUCTION)

31 1/2”

36” / 42”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

21”

Two doors, two drawers, one vent, no shelves

Drawers are shallow height

False front between drawers

34-1/2� HIGH

34 1/2”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

21”

Two doors, two drawers, one vent, no shelves

36� and 42� wide

False vent between two shallow height drawers

VDL36

VDL42

VDL36BH

VDL42BH

OPTIONS

RD

AD

FI

ND

34-1/2� HIGH (MANHATTAN CONSTRUCTION)

34 1/2”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

21”

Two doors, two drawers, one vent, no shelves

36� and 42� wide

False vent between two shallow height drawers

30-3/4� HIGH

30 3/4”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

12”, 15”,

18” & 21”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

Three drawers

Drawers are 8-3/4� high

VDL36BH

VDL42BH

VD12

VD15

VD18

VD21

31-1/2� HIGH (MANHATTAN CONSTRUCTION)

12”, 15”, 18” & 21”

31 1/2”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

Three drawers

One - 5-3/4� high drawer

Two - 10-3/8� high drawers

VANITY CABINETS

AE

IA

BD

HA

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

VD12

VD15

VD18

VD21

High Point Cabinetry — 03/07/2011

4.5

VANITIES


4.6 VANITY CABINETS

VANITIES

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

34-1/2� HIGH

34 1/2”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

Four drawers

12�, 15�, 18�, and 21� wide

Two shallow height drawers and two tall height drawers

VD12BH

VD15BH

VD18BH

VD21BH

34-1/2� HIGH (MANHATTAN CONSTRUCTION)

34 1/2”

21”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

Four drawers

12�, 15�, 18�, and 21� wide

Two - 5-3/4� high drawers

Two - 8-7/8� high drawers

18� Deep Vanities

18� DEEP

30 3/4”

18”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

Two full-height doors, no drawers, no shelves

24�, 30�, 33�, and 36� wide

High Point Cabinetry — 03/07/2011

VD12BH

VD15BH

VD18BH

VD21BH

VL2418

VL3018

VL3318

VL3618

OPTIONS

RD

AD

FI

ND

18� DEEP (MANHATTAN CONSTRUCTION)

31 1/2”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

18”

RD AD FI FB ND IA BD

□$ □$ □$ � � � �

Two doors, no drawers, no shelves

24�, 30�, 33�, and 36� wide

21� Deep Vanities

30-3/4� HIGH

30 3/4”

18”

21”

RD AD FI FB ND IA BD

� � □$ � � � �

Three drawers

18� wide

Top two drawers are 6-3/16� high

Bottom drawer is 13-3/4� high

Hanging hardware included

AE

IA

BD

HA

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

VL2418

VL3018

VL3318

VL3618

VFD18


� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

31-1/2� HIGH (MANHATTAN CONSTRUCTION)

31 1/2”

18”

21”

RD AD FI FB ND IA BD

� � □$ � � � �

Three drawers

Top two drawers are 5-3/4� high

Bottom drawer is 15� high

Hanging hardware included

40”

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Vanity Wall Cabinets

8� DEEP

24”

8”

RD AD FI FB ND IA BD

� � � □$ □$ � �

VFD18

VWS2440

Two doors, two shelves

One shelf behind doors and one open shelf with towel rod beneath

OPTIONS

RD

AD

FI

ND

40”

8� DEEP (MANHATTAN CONSTRUCTION)

24”

8”

RD AD FI FB ND IA BD

� � � □$ □$ � �

VWS2440

Two doors, two shelves

One shelf behind doors and one open shelf with towel rod beneath

Miscellaneous

VANITY LAVATORY FRONT

(MANHATTAN CONSTRUCTION)

31 1/2”

24”, 30” & 36”

Two doors, one vent

6 1/2”

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

VANITY DRAWER UNIT

24” / 30”

21”

VANITY CABINETS

AE

IA

BD

HA

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

4 7/8”

VLF24

VLF30

VLF36

VDU24

VDU30

High Point Cabinetry — 03/07/2011

4.7

VANITIES


4.8 VANITY CABINETS

VANITIES

6”

� Standard

□$ Available with an Upcharge

�! Available with Exceptions

� Not Available

31”

Refer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

VANITY DRAWER UNIT (MANHATTAN CONSTRUCTION)

24” / 30”

VANITY LEG

21 3/4”

21”

6 3/8”

Finished both sides, rounded edges

VDU24

VDU30

VLEGE

VANITY LEG (MANHATTAN CONSTRUCTION)

31 1/2”

21”

6”

Finished both sides, rounded edges

High Point Cabinetry — 03/07/2011

VLEGF

OPTIONS

RD

AD

FI

ND

22”

Vanity Tops

22� DEEP

4” ON CENTER

KC25

KC28

KC31

KC34

KC37

KC43

Cultured marble

ORDER SEPARATELY - Integral oval

KC49

bowl and backsplash. Oval bowl

centered with overflow.

KC55

White on White Left End Splash LES

19"

Reduce Depth

Add Depth

Finished Interior

No Doors/No Drawers

19� DEEP

4" on center

Cultured marble

For use with

VL2418 VL3018

VL3318 VL3618

AE

IA

BD

HA

Applied Overlay Ends

Installed Accessories

Bottom Drawers

Handicap Accessible

Right End Splash RES

MKC2519

MKC3119

MKC3419

MKC3719


* Some items will not have a place for glaze hangup. These will be coated overall in glaze

for color-blend consistency when a Frost or Ivory finish is chosen

using a Caramel or Chocolate glaze.

Bookcases & Desk

Organizers

Fillers/

Filler Boxes

Reference page 7.2 for Filler and Spice Drawer Profiles

Full & Split

Turnings

Installed Accessories

Corbels &

Onlays

High Point Cabinetry — Effective 03/07/2011

ACCESSORIES


5.2 OVERLAY DOORS

OVERLAY ENDS & DOORS

Decorative Overlay Doors

DECORATIVE OVERLAY DOORS

Representative

of door shown

Overlay door sets for UC’s consist of one top door

and one bottom door - 24� deep UC’s need two sets

OVDW15

OVDW18

OVDW21

OVDW24

OVDW30

OVDW36

OVDW42

OVDB

OVDV

High Point Cabinetry — Effective 03/07/2011

OVDVBH

OVDUC84S

OVDUC90S

OVDUC96S

END SKINS

13� x 31�

13� x 43�

25� x 36�

13� x 97�

25� x 97�

ES13X31

ES13X43

ES25X36

ES13X97

ES25X97


40 5/32” - 58 21/32”

28 9/16” - 46 27/32”

28 11/32” - 46 21/32”

Stainless Steel Range Hoods

RANGE HOOD MODERN GLASS

139 3/8”

1 3/32”

11 11/32”

15 3/4”

10 3/32”

35 7/16”

15 1/8”

16”

RANGE HOOD CURVED GLASS

27 9/16”

11 7/32”

4 11/32”

19 9/32”

To be discontinued

9 15/16”

35 7/16”

RANGE HOOD MULTI LAYER

27 3/8”

3 3/4”

19 1/2”

11 7/32”

10 1/32”

15 3/4”

35 7/16”

RHMG36

RHCG36

RHM36

27 5/32” - 45 15/32”

27 9/16” - 45 7/16”

28 5/32” - 46 15/32”

RANGE HOOD TRIAD

27 5/32”

3 15/16”

19 11/16”

11 7/32”

To be discontinued

10 1/16”

RANGE HOOD SLIM

26 3/16”

11 7/32”

18 29/32”

10 1/16”

35 7/16”

35 7/16”

RANGE HOOD PYRAMID

26 19/32”

3 15/16”

11 7/32”

19 11/16”

10 1/16”

35 7/16”

2 31/32”

1 3/32”

RANGE HOODS

1 9/16”

RHT36

RHS36

RHP36

High Point Cabinetry — Effective 03/07/2011

5.3

HOODS


5.4 RANGE HOODS

HOODS

27 3/4” - 42 1/8”

29 23/32” - 44 3/32”

RANGE HOOD ISLAND CURVED GLASS

2 9/16”

23 5/8”

12 29/32”

11 3/16”

35 7/16”

RANGE HOOD ISLAND MULTI LAYER

3 25/32”

23 5/8”

12 29/32”

11 3/16”

35 7/16”

High Point Cabinetry — Effective 03/07/2011

RHICG36

RHIM36

FLUE EXTENSION

39 1/4”

11 1/4”

For use with taller ceilings

10”

HALOGEN REPLACEMENT BULBS

RHEXT

Not shown RHRL


Heritage Collection Wood Range Hoods

25”

ARCHED VALANCE

20”

32”

38”

44”

Available in 30�, 36�, and 42�

Independent Unit - must be attached to wall and cannot

be attached to adjacent cabinets

Exhaust system is not included

For use with blower

Liner and Ductless Kit also available

Check local building codes for installation requirements

Installation instructions and hardware are included

No modifications available

23”

STRAIGHT VALANCE

20”

32”

38”

44”

Available in 30�, 36�, and 42�

Independent Unit - must be attached to wall and cannot

be attached to adjacent cabinets

Exhaust system is not included

For use with blower

Liner and Ductless Kit also available

Check local building codes for installation requirements

Installation instructions and hardware are included

No modifications available

RHA30

RHA36

RHA42

RHST30

RHST36

RHST42

CHIMNEY FOR HERITAGE COLLECTION

21 1/2”

31 1/2”

If ordering: Then order:

11”

14”

20”

26”

RHC31/30

RHC31/36

RHC31/42

RHC21/30

RHC21/36

RHC21/42

1/2� Plywood

Available in 31.5� and 21.5� heights

Can be used with 30�, 36�, and 42� straight and arched wood range hoods

Trimmable to desired height

Hood Chimney Blower Liner Ductless Kit (if needed)

RHA30

or

RHST30

RHA36

or

RHST36

RHA42

or

RHST42

RHC31/30

or

RHC21/30

RHC31/36

or

RHC21/36

RHC31/42

or

RHC21/42

RHBUSHL370

or

RHBUDHL370

RHBUDHL710

RHBUDHL710

RHAL30 (arched)

or

RHSTL30 (straight)

RHAL36 (arched)

or

RHSTL36 (straight)

RHAL42 (arched)

or

RHSTL42 (straight)

RANGE HOODS

DKBUSHL370

or

DKBUDHL370

DKBUDHL710

DKBUDHL710

High Point Cabinetry — Effective 03/07/2011

5.5

HOODS


5.6 RANGE HOODS

HOODS

LINERS

Purchased separately

For use in 30�, 36�, and 42� straight

and arched wood range hoods

30� Straight liner has two brackets

included for installation

Silver Metallic

BLOWERS

(Requires 1 - 50W Halogen Bulb)

(Requires 2 - 50W Halogen Bulbs)

(Requires 2 - 50W Halogen Bulbs)

ARCHED RHAL30

RHAL36

RHAL42

STRAIGHT RHSTL30

RHSTL36

RHSTL42

RHBUSHL370

RHBUDHL370

RHBUDHL710

Purchased separately

Three speed options - max level 370 CFM and 710 CFM

Ideal for use with a ventilating duct

Ductless Kit is available

Includes one removable dishwasher safe aluminum filter

Requires halogen bulb(s) which can be purchased at any home store

Installation instructions, warranty and repair information included

For use with Heritage Collection Wood Range Hoods

DUCTLESS KITS

Kit contains the following:

Conversion duct

Duct

Grill

Charcoal filter(s)

Installation screws

High Point Cabinetry — Effective 03/07/2011

DKBUSHL370

DKBUDHL370

DKBUDHL710

RANGE HOOD, BLOWER, DUCTLESS KIT

ADJACENT

CABINET

30”

24”

ADJACENT

CABINET

RH30FA

Tilts out for Frameless

Should be ordered according to door style since doors are on the front

RHBE

Includes housing, blower unit, damper, lights, (2) L-shaped filters, and motor

speed controls. Must vent

Required for use with RH30FA

Uses one filter included

Not pictured DCK2

RANGE HOOD, BLOWER, DUCTLESS KIT

FOR WOOD LINES

30”

Galley Rail shipped loose

24”

RH30

RHB

Includes housing, blower unit, damper, lights, (2) L-shaped filters,

and motor speed controls. Must vent

Required for use with RH30

Will only work with RH30

Will not work in Heritage Wood Hoods

Not pictured DCK1


42”

CORNER SHELF TOP PLATE

6”

LH as shown

12”

RH as shown

12”

6”

30”/

36”

CS630

CS636

CS642

CSTP126

Designate LH or RH when ordering ALL white lines

In white lines, edges of the shelves are profiled

CSTP126 has a square top shelf for use with crown moldings, and is finished on

both sides (not pictured)

BOOKCASES

24”, 30”, 36”

48”/

52”/

58”

Fixed shelf has a 2 3/4”

facia board on front

Fixed shelf

has a 2 3/4”

facia board

on front

17 1/2”

from bottom

of facia board

to countertop

12”

12”

Bookcases have

a finished interior

and exterior.

Bottom shelf is

stationary and

other 2 shelves

are adjustable.

17 1/2”

from bottom

of facia board

to countertop

24”, 30”, 36”

Fixed bottom shelf and two adjustable shelves in 48�/52�/58� high

Fixed bottom shelf and three adjustable shelves in 64� high

Interior is finished to match exterior

6”

6”

DESK ORGANIZERS

36”

30”

12”

12”

Interior finished to match exterior

WALL ACCESSORIES

64”

BC2448E

BC3048E

BC3648E

BC2452E

BC3052E

BC3652E

BC2458E

BC3058E

BC3658E

BC2464E

BC3064E

BC3664E

DO30

DO36

High Point Cabinetry — Effective 03/07/2011

5.7

WALL ACCESSORIES


5.8 WALL ACCESSORIES

WALL ACCESSORIES

6”

SPICE DRAWER CABINET, WINE CUBE CABINET

18”, 24”,

30”, 36”, 42”

5 3/4”

12”

Cabinet shown horizontal with

one spice drawer box, SPDBX

12”

6”

18”,

24”,

30”,

36”,

42”

5 3/4”

SPWC18

SPWC24

SPWC30

SPWC36

SPWC42

SPDBX

*Specify species; M=Maple, C=Cherry

18� wide spice drawer cabinet accepts three spice drawer boxes,

24� wide accepts four boxes,

30� wide accepts five boxes,

36� wide accepts six boxes, and

42� wide accepts seven boxes

Boxes to be ordered separately as SPDBX

Available in all finishes

Finished both ends

Not intended for end of run (staples and pinholes will show)

Finished on side, top, and bottom

Drawer boxes are ordered by door style

SCALLOPED WINE RACK

36”

36”

Scalloped wood

Trim in 3� increments

2 1/2”

STEMWARE HOLDER

11 3/4”

36”

1 5/8”

3-1/4� Moldings are mounted on 4� centers

WR

SH

High Point Cabinetry — Effective 03/07/2011

18”

CORNER APPLIANCE HUTCH

12 1/4”

24”

Finished on interior and exterior

18”

CAH

CORNER APPLIANCE HUTCH

(MANHATTAN CONSTRUCTION)

12 1/4”

24”

Finished on interior and exterior

CAH

ROUND LAZY SUSAN SHELVES

For use in diagonal corner wall cabinets

Designate White (W) or Almond (A) when ordering

CAHX

CAHE

2 - 20� Diagonal RLS30

2 - 20� Diagonal RLS36

3 - 20� Diagonal RLS42


ROLL OUT TRAYS

RT12

RT15

RT18

RT21

Order RTU same size as cabinet

One unit packed per box

RT24

Standard RTU’s are 7mil miter-fold

vinyl tray with 2-1/2� sides

RT27

Color will be natural maple for wood

lines and white for white lines

Designed for pantry base and utility cabinets that are 24� deep ONLY

Will not fit vanity cabinets

Pilasters are 20� tall and sit 1/4� from bottom of cabinet

Accommodates three roll outs max per pilaster

50 lb. capacity per tray

WOOD ROLL OUT TRAYS

Order WDRTU same size as cabinet

One unit packed per box

Wood RT’s are a maple wood tray

with 2-1/2� sides

Designed for pantry base and utility

cabinets that are 24� deep ONLY

Will not fit vanity cabinets

Pilasters are 20� tall and sit 1/4� from

bottom of cabinet

Accommodates three roll outs max

per pilaster

All mounting fixtures included

50 lb. capacity per tray

ROLL OUT TRAYS

WRT12

WRT15

WRT18

WRT21

WRT24

WRT27

WRT30

WRT33

WRT36

High Point Cabinetry — Effective 03/07/2011

5.9

BASE ACCESSORIES


5.10 BASE ACCESSORIES

BASE ACCESSORIES

SINGLE WASTE BASKET FOR 24� DEEP BASE

10 3/4”

36 Qt

SWB fits all base cabinets 12� wide and larger

Does not fit TB9, PB21, or PB24

SWB

DOUBLE WASTE BASKET FOR 24� DEEP BASE

11 5/8”

27 Qt per container

Fits bases that are 15� wide and larger

Does not fit TB9, PB12, PB24, or PB27

DWB

DOOR MOUNTING KIT FOR 24� DEEP BASE

Drawing not shown DMK

35 QT SINGLE WASTE BIN

22 5/8”

35 qt

container

included

6” Dove-tailed construction

19 1/4”

12”

Full ext for PB15 and up

Will not work in PB27; opening is too small

All mounting hardware and DMK included

Features soft-close open & close

High Point Cabinetry — Effective 03/07/2011

WDSWB35

35 QT DOUBLE WASTE BIN

22 5/8”

2 - 35 qt

containers

included

6” Dove-tailed construction

19 1/4”

14 1/4”

Full ext for PB18 and up

Will not work in PB30; opening is too small

All mounting hardware and DMK included

Features soft-close open & close

CUTLERY TRAY

Plastic - 16� x 21�

Trim to fit drawers in 18� base cabinets

WDDWB35

CT18


B

DRAWER INSERT ACCESSORIES

14� Wood Cutlery Tray

For use in 15� and 18� cabinets

20� Wood Cutlery Tray

For use in 21� and 24� cabinets

18� Wood Utility Tray

For use in 12�, 18�, 21�, and 24� cabinets

18� Spice Drawer Insert

For use in 18� and 21� cabinets

A

Right Pull

C

Left-hand corner

base shown

Framed Cabinet

C

WDCT14

WDCT20

WDUT18

WDSI18

A

Left Pull

Right-hand corner

base shown

B

CORNER PULLOUT ORGANIZERS

LeMans Corner Pullout - R (Right Pull)

LeMans Corner Pullout - L (Left Pull)

Will work in both framed and frameless cabinets

See drawing and chart below

A B

BASE ACCESSORIES

Framed Cabinet

C

LBCP4851R

LBCP4851L

Frameless Cabinet

INCHES (mm) INCHES (mm) INCHES (mm) INCHES (mm)

min. 33-1/2 (851) min. 21 (533) 15-16 (381-406) 16-17 (406-432)

min. 34-1/2 (876) min. 21 (533) 18-19 (457-483) 19-20 (483-508)

min. 39-1/2 (1003) min. 21 (533) 21-22 (533-559) 22-23 (559-584)

Inside dimension (clearance height) for all cabinets: min. 28 inches (711 mm)

High Point Cabinetry — Effective 03/07/2011

C

5.11

BASE ACCESSORIES


5.12 TALL ACCESSORIES

TALL ACCESSORIES

SHELF KITS FOR UTILITY CABINETS

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

SHELF KITS FOR UTILITY CABINETS

(MANHATTAN CONSTRUCTION)

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

High Point Cabinetry — Effective 03/07/2011

UC3S1812X

UC3S1824X

UC3S2412X

UC3S2424X

UC3S1512

UC3S1524

UC3S1812

UC3S1824

UC3S2412

UC3S2424

UC3S3012

UC3S3024

UC3S3612

UC3S3624

PANTRY ROLL OUTS

Fits UC1824

Mount left or right side of cabinet

Baskets are 3� apart

Available in white only

Fits UC2424

Mount in center only

Baskets are 3� apart

Available in white only

White PROS

White PROD


12”

15”

18”

21”

24”

27”

30”

36”

42”

Filler Boxes

WALL FILLER BOXES - PLAIN

15”

Filler boxes are 5/8� thick veneered plywood end

panels joined together with grooved and dado

construction

All are 3� wide

Edges are unfinished

34 1/2”

BASE FILLER BOXES - PLAIN

27”

Filler boxes are 5/8� thick veneered plywood end

panels joined together with grooved and dado construction

All are 3� wide

Edges are unfinished

VANITY FILLER BOXES - PLAIN

30 3/4”

31 1/2”

&

34 1/2”

24”

WFB12

WFB15

WFB18

WFB21

WFB24

WFB27

WFB30

WFB36

WFB42

BFB3

VFB3

Filler boxes are 5/8� thick veneered plywood end

panels joined together with grooved and dado construction

All are 3� wide

Edges are unfinished

VFBBH3

84”

90”

&

96”

TALL FILLER BOXES - PLAIN

15” & 27”

Filler boxes are 5/8� thick veneered plywood end

panels joined together with grooved and dado construction

All are 3� wide

Edges are unfinished

12”

15”

18”

21”

24”

27”

30”

36”

42”

WALL FILLER BOXES - FLUTED

15”

Fluted filler boxes are 5/8� thick veneered

plywood end panels joined together with

grooved and dado construction

They are the same as plain filler boxes

but with a fluted filler

All are 3� wide

Edges are unfinished

BASE FILLER BOXES - FLUTED

34 1/2”

27”

TFB8415

TFB9015

TFB9615

TFB8427

TFB9027

TFB9627

WFC12

WFC15

WFC18

WFC21

WFC24

WFC27

WFC30

WFC36

WFC42

BFC3

Fluted filler boxes are 5/8� thick veneered plywood end

panels joined together with grooved and dado construction

They are the same as plain filler boxes but with a fluted filler

All are 3� wide

Edges are unfinished

FILLERS

High Point Cabinetry — Effective 03/07/2011

5.13

FILLERS


5.14 FILLERS

FILLERS

VANITY FILLER BOXES - FLUTED

30 3/4”

31 1/2”

&

34 1/2”

24”

VFC3

VFCBH3

Fluted filler boxes are 5/8� thick veneered plywood end

panels joined together with grooved and dado construction

They are the same as plain filler boxes but with a fluted filler

All are 3� wide

Edges are unfinished

84”

90”

&

96”

TALL FILLER BOXES - FLUTED

15” & 27”

Fluted filler boxes are 5/8� thick veneered plywood end

panels joined together with grooved and dado construction

They are the same as plain filler boxes but with a fluted filler

All are 3� wide

Edges are unfinished

12”

15”

18”

21”

24”

27”

30”

36”

42”

WALL FILLER BOXES - PROFILED

15”

Filler boxes are 5/8� thick veneered

plywood end panels joined together with

grooved and dado construction

All are 3� wide

Edges are unfinished

High Point Cabinetry — Effective 03/07/2011

TFC8415

TFC9015

TFC9615

TFC8427

TFC9027

TFC9627

WPC12

WPC15

WPC18

WPC21

WPC24

WPC27

WPC30

WPC36

WPC42

BASE FILLER BOXES - PROFILED

34 1/2”

27”

BPC3

Filler boxes are 5/8� thick veneered plywood end

panels joined together with grooved and dado construction

All are 3� wide

Edges are unfinished

VANITY FILLER BOXES - PROFILED

30 3/4”

31 1/2”

&

34 1/2”

24”

VPC3

Filler boxes are 5/8� thick veneered plywood end

panels joined together with grooved and dado construction

All are 3� wide

Edges are unfinished

TALL FILLER BOXES - PROFILED

15” & 27”

Filler boxes are 5/8� thick veneered plywood end

panels joined together with grooved and dado construction

All are 3� wide

Edges are unfinished

VPCBH3

TPC8415

TPC9015

TPC9615

TPC8427

TPC9027

TPC9627


12”

15”

18”

24”

30”

36”

42”

36”

42”

Wall Fillers

5/8� LAMINATE WALL FILLERS WITH OVERLAY

3”

3/4� WOOD WALL FILLER - FLAT

6” 1”

36”

42”

Solid Wood - 3/4� thick

30”/

36”/

42”

30”/

36”/

42”

5/8� LAMINATE WALL FILLERS - FLAT

FS3

For Manhattan, order

as FS330

FS312

FS315

FS318

FS324

FS336

FS342

FS136

1� wide

FS142

1� wide

FS636

6� wide

FS642

6� wide

3” FF330

5/8� LAMINATE WALL FILLERS - FLAT

3”

FF336

FF342

FS3F

For Manhattan, order

as FS330F

FS336F

FS342F

30”

36”

42”

30”/

36”/

42”

Wall, Base & Vanity Fillers

5/8� CORNER LAMINATE WALL FILLERS

WITH OVERLAY

3”

3”

CWF3

For Manhattan, order

as CWF330

CWF336

CWF342

5/8� CORNER LAMINATE WALL FILLERS - FLAT

3” 3”

34-1/2� HIGH LAMINATE BASE FILLERS

3” / 6”

34 1/2”

w/overlay flat

34 1/2”

3” / 6”

34 1/2”

CWF3F

For Manhattan, order

as CWF330F

CWF336F

CWF342F

BF3

BF6

BF3F

BF6F

34-1/2� HIGH CORNER LAMINATE BASE FILLERS

3”

w/overlay flat

3”

34 1/2”

FILLERS

CBF3X3

CBF3X3F

High Point Cabinetry — Effective 03/07/2011

5.15

FILLERS


5.16 FILLERS

FILLERS

30-3/4� & 31-1/2� HIGH 5/8� LAMINATE

VANITY BASE FILLERS

3”

30 3/4”/

31 1/2”

3”

w/overlay flat

84”

90”

96”

Tall Fillers

30 3/4”/

31 1/2”

5/8� LAMINATE TALL FILLERS

3”

3”

84”

90”

96”

w/overlay flat

Filler aligns with top door panel and bottom door panel

84”

90”

96”

VBF3

VBF3F

TF84F

TF90F

TF96F

TF84

TF90

TF96

TALL FILLERS (MANHATTAN CONSTRUCTION)

3”

84”

90”

96”

w/overlay flat

3”

Filler aligns with top door panel and bottom door panel

TF384F

TF390F

TF396F

TF384

TF390

TF396

High Point Cabinetry — Effective 03/07/2011

12”

15”

18”

24”

30”

36”

42”

Fluted Fillers

WALL FLUTED FILLERS - WOOD

3”

3”

Section View

1 1/2”

1 1/2”

3/4”

BASE FLUTED FILLERS - WOOD

3”

34 1/2”

1 1/2”

6”

Base Fluted Filler

2”

2”

FS312FL

FS315FL

FS318FL

FS324FL

FS330FL

FS336FL

FS342FL

BF3FL

BASE ANGLE FLUTED FILLERS - WOOD

3”

Base angle

3/4”

30” &

27”

4 3/4”

3”

3”

Section view

BAF3FL

For Manhattan, order

as BAF330FL

BAF327FL


VANITY FLUTED FILLERS - WOOD

3”

34 1/2”

1 1/2”

6”

Vanity Fluted Filler

3”

TALL FLUTED FILLERS - WOOD

84”

90”

96”

6”

1 1/2”

Filler aligns with top door panel and bottom door panel

30”/

36”/

42”

Miscellaneous

SCRIBE FILLER WALL

3”

Filler profiled on three sides

Not available in Cascade

VBF3FL

FS384FL

FS390FL

FS396FL

SFW30

For Manhattan, order

as SFW330

SFW36

For Manhattan, order

as SFW336

SFW42

For Manhattan, order

as SFW342

SCRIBE FILLER BASE

34 1/2”

3”

Filler profiled on three sides

Not available in Cascade

96”

REFRIGERATOR END PANEL

24 3/4”

5/8� thick

Both sides finished and edgebanded on both long edges

DISHWASHER END PANEL

34 1/2”

3”

24 3/4”

5/8� thick

One side finished

3”

24 3/4”

34 1/2”

FILLERS

SFB

For Manhattan, order

as SFB3

REP96

DWE3

DWE3F

High Point Cabinetry — Effective 03/07/2011

5.17

FILLERS


5.18 FILLERS

FILLERS

DISHWASHER END PANEL

(MANHATTAN CONSTRUCTION)

34 1/2”

34 1/2”

24 3/4”

24 3/4”

5/8� thick

One side finished

3”

3”

DWE3

High Point Cabinetry — Effective 03/07/2011

DWE3F

SINK FRONT END PANEL

34 1/2”

24 3/4”

SFE

5/8� thick

Veneer

Finished on two sides and edgebanded on one 34-1/2� side

If white, will be melamine


5/16”

Laminate & Wood Moldings

LAMINATE MOLDINGS - FOR WHITE LINES ONLY

15/16”

1/4”

1 1/2”

2”

3/4”

1/4” 1/4"

1/2”

1 1/4”

15/16”

1 1/4”

2 1/2”

1 1/2”

3/4”

3/4”

5/16”

3/4”

1 1/4”

1/2”

Wood Moldings

WOOD MOLDINGS

11/16”

1 1/4”

3/4”

3/4"

1”

1"

7/32”

5/16”

WCR96

8� pc. Outside Corner

WCR96 Box

Box 48� Outside Corner

WSM96

8� pc. Cap 1-1/4�

WSM96 Box

Box 48� Cap 1-1/4�

WST96

8� pc. Scribe Trim

WST96 Box

Box 48� Scribe Trim

WLB96

8� pc. Light Bar

WLB96 Box

Box 48� Light Bar

WRC96

8� pc. Radius Corner

WRC96 Box

Box 48� Radius Corner

SM96

8� pc. Scribe 11/16�

SM96 Box

Box 48� Scribe 11/16�

CM96

8� pc. Cap 1-1/4�

CM96 Box

Box 48� Cap 1-1/4�

CR96

8� pc. Outside Corner

CR96 Box

Box 48� Outside Corner

WOOD MOLDINGS

1/4” 1/2”

3/4”

2 1/8" 1/8”

3/4”

3/4”

SCR96

8� pc. Small Outside

Corner

SCR96 Box

Box 48� Small Outside

Corner

1/4” CV96

8� pc. Cove

3/4”

3/4"

1 3/4”

1 1/8”

1/2”

11/16”

3/4”

3/4”

3/4”

2”

1/4”

MOLDINGS

CV96 Box

Box 48� Cove

BM96

8� pc. Batten

BM96 Box

Box 48� Batten

GR96

8� pc. Galley Rail

GR96 Box

Box 48� Galley Rail

CTEM96

8� pc. Counter Top Edge

CTEM96 Box

Box 48� Counter Top Edge

SF96

8� pc. Soffit

SF96 Box

Box 48� Soffit

SF144

12� pc. Soffit

SF144 Box

Box 36� Soffit

LB96

8� pc. Light Bar

LB96 Box

Box 48� Light Bar

High Point Cabinetry — Effective 03/07/2011

5.19

MOLDINGS


5.20 MOLDINGS

MOLDINGS

11/16”

WOOD MOLDINGS

2 5/8”

3 5/16”

3”

11/16”

4 1/16”

4 3/16”

2 3/16”

4 1/8”

3/4”

3 5/8”

3/4”

High Point Cabinetry — Effective 03/07/2011

WCWN96

8� pc. Crown

WCWN96 Box

Box 48� Crown

WCWN144

12� pc. Crown

WCWN144 Box

Box 36� Crown

SBM96

8� pc. Shoe Base

SBM96 Box

Box 48� Shoe Base

RM96

8� pc. Rope Strip

RM96 Box

Box 48� Rope Strip

DM96

8� pc. Dentil Strip

DM96 Box

Box 48� Dentil Strip

BCWN96C

8� pc. Beaded Crown

BCWN96C Box

Box 48� Beaded Crown

BCWN144C

12� pc. Beaded Crown

BCWN144C Box

Box 36� Beaded Crown

UCWN96C

8� pc. Universal Crown

UCWN96C Box

Box 48� Universal Crown

UCWN144C

12� pc. Universal Crown

UCWN144C Box

Box 36� Universal Crown

1/2”

WOOD MOLDINGS

2 5/8”

7/8”

1 5/16”

3/4”

3/4”

1/2”

2 3/4”

1 3/4”

2 3/8”

3”

3 5/8”

2”

1 1/2”

R 5/8”

5/8”

R 1/4” typ.

SCM96C

8� pc. Shaker Crown

SCM96C Box

Box 48� Shaker Crown

SCM144C

12� pc. Shaker Crown

SCM144C Box

Box 36� Shaker Crown

LCWN96

8� pc. Large Crown

Molding w/Heel

LCWN144

12� pc. Large Crown

Molding w/Heel

RLR96

8� pc. Radius Light

Rail Molding

RLR144

12� pc. Radius Light

Rail Molding

TBSM96

8� pc. Triple Bead

Stacked Molding

TBSM144

12� pc. Triple Bead

Stacked Molding


Valances

SCALLOPED VALANCE

48” / 72”

3/4� Solid Wood

Available in Wood lines only

6”

4 1/2”

SSCV48

SSCV72

VALANCE - 3/4� LAMINATE & SOLID WOOD

48”/ 72”/ 96”

RV’s have profiled edge

White lines are laminate

Wood lines are species specific

RV96 not available in wood lines

6”

5/8� WHITE SOLID LAMINATE

48” / 72”

Available in Cascade only

FRIEZE VALANCE

RV48

RV72

RV96

WSV48

WSV72

48� Trimmable to 31-1/2� FV48

72� Trimmable to 54�

5”

48” / 72”

3/4� Solid Wood

Available in all lines except Cascade

Dim “B”

ARCHED VALANCE

3”

Dim “A”

2 1/2”

2 5/16”

2 5/16”

Dim “C”

Arched Valance’s

SKU Dim “A” Dim “B” Dim “C”

AV30 30.0” 12.5” 4.5”

AV36 36.0” 12.5” 4.5”

AV48 48.0” 15.5” 4.5”

AV54 54.0” 15.5” 4.5”

AV60 60.0” 18.5” 4.5”

Trimmable up to 2� on each side

FV72

AV30

AV36

AV42

AV48

AV54

AV60

Aprons

SCALLOPED FURNITURE APRON

38”, 44”, 50”

4” 4”

Available in all finishes

3/4� thick

*Specify species; M=Maple, C=Cherry

4 5/8”

ARCHED FURNITURE APRON

4”

20”, 26”, 32”

4 5/8”

Available in all finishes

3/4� thick

*Specify species; M=Maple, C=Cherry

Onlays & Corbels

ACANTHUS ONLAYS

20”

2 7/8”

2 9/16”

5”

1 9/16”

5 1/8”

3 3/4”

4 1/2”

4 1/2”

1 9/16”

*Specify species; M=Maple, C=Cherry

DECORATIVE ACCENTS

5/8”

FA38

Trimmable to 36�

FA44

Trimmable to 42�

FA50

Trimmable to 48�

FA20

Trimmable to 18�

FA26

Trimmable to 24�

FA32

Trimmable to 30�

LONLAYA

Large Onlay

ONLAYA3

Small Ornament

ONLAYA6

Large Ornament

High Point Cabinetry — Effective 03/07/2011

5.21

DECORATIVE ACCENTS


5.22 DECORATIVE ACCENTS

DECORATIVE ACCENTS

GRAPE ONLAYS

3 3/16”

3 5/8”

5/8”

4 1/2”

20” 5/8”

2 5/16”

3 1/2”

5/8”

Easy to apply with woodworking glue or a small brad

Available in all finishes

*Specify species; M=Maple, C=Cherry

High Point Cabinetry — Effective 03/07/2011

SONLAYGR

Small

LONLAYGR

Large

GRCL

Grape Cluster

GRAPE CORBELS

22 mm

( 7 /8”)

51 mm

(2”)

111

(4 3/8”)

146 mm

(5 3 /4”)

116 mm

(4 9 /16”)

73 mm

(2 7 /8”)

610

(24”)

22 mm

( 7 /8”)

133

(5 1/4”)

154 mm

(6 1 /16”)

139 mm

(5 1 /2”)

234 mm

(9 3 /16”)

225 mm

(8 7 /8”)

102

(4”)

305

(12”)

225 mm

(8 7 /8”)

324 mm

(12 3 /4”)

GRCOR9

Small

GRCOR13

Medium

GRCOR24

Large

Wood corbels can be mounted with keyhole plates provided and pre-attached

If using the keyhole plates, use #8 or larger screws


ACANTHUS CORBELS

22 mm

( 7 /8”)

146 mm

(5 3 /4”)

116 mm

(4 9 /16”)

50 mm

(2”)

73 mm

(2 7 /8”)

111

(4 3/8”)

22 mm

( 7 /8”)

610

(24”)

ROSETTE

3� x3� x 3/4�

Solid Wood

6”/

9”/11”

234 mm

(9 3 /16”)

154 mm

(6 1 /16”)

139 mm

(5 1 /2”)

225 mm

(8 7 /8”)

123

(5 1/4”)

228 mm

(9”)

330 mm

(13”)

102

(4”)

305

(12”)

DECORATIVE COUNTER BRACKET

3”

6”/9”/11”

ACOR9

Small

ACOR13

Medium

ACOR24

Large

ROS3

DCB6

DCB9

DCB11

Furniture Feet & Turnings

FURNITURE FEET

3”

1 3/4”

4 5/8”

3 1/2”

Apple Foot Tulip Foot

4 5/8”

Available in all finishes

SOLD INDIVIDUALLY

*Specify species; M=Maple, C=Cherry

2-SIDED TAPER LEG

*Specify species; M=Maple, C=Cherry

FULL TURNING - PLAIN

35 1/4”

7 1/4”

3 1/2” – 4 1/2”

Available in all finishes

*Specify species; M=Maple, C=Cherry

DECORATIVE ACCENTS

APL

TLL

TLG

PFT3

3-1/2�

PFT4

4-1/2�

High Point Cabinetry — Effective 03/07/2011

5.23

DECORATIVE ACCENTS


5.24 DECORATIVE ACCENTS

DECORATIVE ACCENTS

FULL WOOD TURNING - PLAIN

7 1/2”

4 1/2”

2 13/16”

2 13/16”

34 1/2”

*Specify species; M=Maple, C=Cherry

FULL TURNING - REEDED

35 1/4”

1/4”

3 1/2” – 4 1/2”

Available in all finishes

16 Reeds on 3-1/2�

20 Reeds on 4-1/2�

*Specify species; M=Maple, C=Cherry

8”

SPLIT TURNING END POST

2 1/2”

5 1/2”

*Specify species; M=Maple, C=Cherry

PFT2

RFT3

3-1/2�

RFT4

4-1/2�

PST

High Point Cabinetry — Effective 03/07/2011

7 1/2

4 1/2

SPLIT WOOD TURNING

2 13/16

1 3/8

34 1/2

*Specify species; M=Maple, C=Cherry

SPLIT TURNING - PLAIN

30”

42”

84”

1 7/8”

5/8”

Available in all finishes

*Specify species; M=Maple, C=Cherry

SPLIT TURNING - REEDED

30”

42”

84”

1 7/8”

5/8”

Available in all finishes

*Specify species; M=Maple, C=Cherry

Cannot be used by itself

PST2

PST30

PST42

PST84

RST30

RST42

RST84


Panels

34 1/2”

34 1/2”

34 1/2”

&

48”

FINISHED OVERLAY END PANEL - LAMINATE

96” FP96X34

Edge Banded

3 Sides

FINISHED OVERLAY END PANEL - 3/16� PLYWOOD

GRAIN

96”

FP

Horizontal grain

GRAIN

96”

FPC

Vertical grain

All are 3/16� Plywood

Finished panels for Onyx and Ivory are crossgrain

Grain runs with the length

FP96X34

FPC34X96

FPC48X96

BEAD BOARD PANEL

96” X 48”

96”

DECORATIVE ACCENTS

48”

BBP96X48

High Point Cabinetry — Effective 03/07/2011

5.25

DECORATIVE ACCENTS


5.26 MISCELLANEOUS

MISCELLANEOUS

LOOSE SHELVING - MAPLE VENEER MDF

11 1/2”

Finished on two surfaces and front edge

TOE PLATE COVER - 96� x4� x 3/16�

Single 8� pc. TP96

Box 48’ with 6 pcs.

For white lines, it is 3/8� thick

One side is white and one side is black

TOE PLATE CAP

Not shown

Sold in boxes of 25

High Point Cabinetry — Effective 03/07/2011

LS48

48� x 11-1/2� x 3/4�

LS96

96� x 11-1/2� x 3/4�

TP96 Box

TPC-White (WHT)

TPC-Black (BLK)

4”

4 1/2”

RANGE TOE PLATE

1 3/4”

30”

15”

RTP30X

RANGE TOE PLATE (MANHATTAN CONSTRUCTION)

3 1/2”

30”

HEAT SHIELDS

15”

18 gauge steel with white powder coat finish

1-9/16� x 30�

Sold two per package

TOUCH-UP KIT

Contains: Liquid finish in brush-top bottle,

soft filler stick and felt touch-up marker

RTP30E

HS2

TUK

TOUCH-UP AEROSOL SPRAY AND STAIN

HAZMAT charges do apply

Required by DOT, Regulation HM126F

Hazmat certification is required if an

individual is picking up

Quart Stain

Aerosol Spray


CARE AND MAINTENANCE OF MARSH CABINETS

WOOD SURFACES

For normal cleaning use a clean soft cloth dampened with a mild solution of two drops of dishwashing liquid per

one gallon of water.

Dry off thoroughly, removing any excess moisture.

DO NOT USE STRONG DETERGENTS, SOLVENTS, OR ABRASIVE CLEANERS.

Do not use a dish cloth on cabinet surfaces.

THERMOFOIL AND MELAMINE SURFACES

For normal cleaning use a clean soft cloth dampened with a mild solution of two drops of dishwashing liquid per

one gallon of water.

Dry off thoroughly, removing any excess moisture.

DO NOT USE STRONG DETERGENTS, SOLVENTS, OR ABRASIVE CLEANERS.

Do not use a dish cloth on cabinet surfaces.

All non-abrasive household cleaners may be used. Examples: Simple Green, Formula 409, etc.

When using a self-cleaning oven, opening all the adjacent doors and drawers or using heat shields is

recommended. This is to help prevent damage and discoloration of the cabinets.

MOISTURE FROM STEAM AND HOT WATER PRESENT IN KITCHENS SHOULD BE KEPT OFF OF ALL

CABINETS. IF CABINETS DO GET WET, DRY THEM BY WIPING WITH A CLEAN SOFT DRY CLOTH TO

MAINTAIN FINISH.

High Point Cabinetry — Effective 03/07/2011

7.1

ADDITIONAL INFORMATION


7.2

ADDITIONAL INFORMATION

PROFILES FOR GL DOORS AND FILLER BOXES

Rosewood

Windsor

Shaker &

Mission

High Point Cabinetry — Effective 03/07/2011

1/2� Rab

1/2� Rab

9/16� Rab

More magazines by this user
Similar magazines