Safety Equipment 10.6 MB - Clarkson Laboratory and Supply

clarksonlab.com

Safety Equipment 10.6 MB - Clarkson Laboratory and Supply

SHORT LINE CATALOG

HAWS CATALOG 0003241584

revised 1999

EMERGENCY EQUIPMENT


EYEWASHES

PORTABLES

DRENCH

SHOWERS

2

4-8

9-10

11-13

COMBINATION UNITS

DECONTAMINATION

UNIT

LABORATORY

UNITS

BARRIER FREE

MODELS

POLAR SHOWERS

TEMPERED

WATER

ACCESSORIES

14-20

21-27

28-31

32-33

34-38

A Q U I C K L O O K

This shortline catalog provides a quick

look at Haws extensive line of

emergency equipment, including color

photos, model numbers and detailed

descriptions. Divided into eight product

category sections, it directs you toward

the type of equipment needed for most

applications.

For complete details on any product,

return the enclosed reply card or use

Haws 24-hour, 7-day toll free

INFOFAX: 1-888-FAX-HAWS (1-888-329-4297)

An automated voice will prompt you

through our system. International

customers: dial direct 510-525-0609.

(See page 3 for code numbers you will

need to use)

CERTIFIED

to ANSI Z358.1

Notice: All models shown meet ANSI Standard and

OSHA rules and regulations relating to this type of

product. Units should be tested regularly. Continued

product improvements make specifications subject to

change without notice.

RS Models marked with this symbol are stocked for

immediate delivery in our Regional Warehouses. To

order from these warehouses, contact your local HAWS

REPRESENTATIVE.

W A R R A N T Y

HAWS warrants that all of its products are

guaranteed against defective material or

workmanship for a period of one year

from date of shipment. HAWS liability

under this warranty shall be discharged

by furnishing without charge FOB HAWS

Factory any goods, or part thereof, which

shall appear to the Company upon

inspection to be defective material or not

of first class workmanship, provided that

claim is made in writing to Company

within a reasonable period after receipt of

the product. Where claims for defects are

made, the defective part or parts shall be

delivered to the Company, prepaid, for

inspection. HAWS will not be liable for

the cost of repairs, alterations, or replacements,

or for any expense connected

therewith made by the owner or his

agents, except upon written authority from

HAWS. HAWS will not be liable for any

damages caused by defective materials or

poor workmanship, except for replacements,

as above provided. Buyer agrees

that HAWS has made no other warranties

either expressed or implied in addition to

those above stated, except that of title

with respect to any of the products or

equipment sold hereunder and that

HAWS shall not be liable for general,

special, or consequential damages

claimed to arise under the contract of

sale.

This emergency equipment manufactured

by Haws Corporation is warranted to

function if installation and maintenance

instructions provided are adhered to. The

units also must be used for the purpose

which they were intended. This product is

intended to supplement first-aid treatment.

Due to widely varying conditions,

Haws Corporation cannot guarantee that

the use of this emergency equipment will

prevent serious injury or the aggravation

of existing or prior injuries.

NO OTHER WARRANTIES EXPRESSED

OR IMPLIED ARE AUTHORIZED,

PROVIDED OR GIVEN BY HAWS

CORPORATION.

OSHA - Haws Emergency Equipment

enables you to meet the requirements in

the OSHA Rules and Regulations covering

this type of equipment.

ANSI - Haws Emergency Equipment is

manufactured to meet ANSI Z358.1 for

Emergency Eyewash and Shower

Equipment.


INFOFAX: 1-888-FAX-HAWS (1-888-329-4297) ● INTERNATIONAL: DIAL DIRECT 510-525-0609

Model Catalog Specification Installation Operation &

Page # Sheet Drawings Maintenance

7000B 4 170002 270002 370002

7000BT 4, 29 170002 270002 370002

7001 4 17001 27001 37001

7100B 4 171002 271002 371002

7100BT 4 171002 271002 371002

7101 4 17101 27101 37101

7120B 5 171202 271202 371202

7120BT 5 171202 271202 371202

7121 5 17121 27121 37121

7260 5 17260 27260 37260

7260B 5 172602 272602 372602

7260BT 5 172602 272602 372602

7261 6 17261 27261 37261

7301DM 21 1730136 2730136 3730136

7324 6 17324 27324 37324

7360 6 17360 27360 37360

7360B 6 173602 273602 373602

7360BT 6 173602 273602 373602

7360BTWC 28 17360289 27360269 37260289

7361 6 17361 27361 37361

7433FP 7 1743337 2743337 3743337

7460 7 17460 27460 37460

7460B 7 174602 274602 374602

7460BT 7 174602 274602 374602

7461 7 17461 27461 37461

7500 9 17500 27500 37500

7500EB 9 1750032 2750032 3750032

7601.10.2 10 17601102 27601102 37601102

7601.37 10 1760137 2760137 3760137

7602.10 10 1760210 2760210 3760210

7602.15 10 1760215 2760215 3760215

7602.10TW 10 1760289 2760289 3760289

7610 21 17610 27610 37610

7611 21 17611 27611 37611

7612 22 17612 27612 37612

7612LH 22 1761254 2761254 3761254

7613 22 17613 27613 37613

7650 22 17650 27650 37650

7651 22 17651 27651 37651

7655WC 22,29 1765592 2765592 3765592

7656WC 22,29 1765692 2765692 3765692

7720 8 17720 27720 37720

7721 8 17721 27721 37721

7752WC 29 1775292 2775292 3775292

7760 8 17760 27760 37760

7760B 8 177602 277602 377602

7760BT 8 177602 277602 377602

7763 8 17763 27763 37763

7777 8 17777 27777 37777

7778B 8 177782 277782 377782

8100 11 18100 28100 38100

8111FP 11 1811137 2811137 3811137

8122H 11 181224 281224 381224

8122HWC 29 18122492 28122492 38122492

8122V 11 181228 281228 381228

8123H 13 181234 281234 381234

8123HCTFP 12 18123428 28123428 38123428

8123HPCP 24 18123727 28123727 38123727

8123V 13 181238 281238 381238

8127 34 18127 28127 —

8127HP 34 18127 28127 —

8129 34 18129 28129 —

8130H 13 181304 281304 381304

8130V 13 181308 281308 381308

8133H 13 181334 281334 381334

8133V 13 181338 281338 381338

8163 23 18163 28163 38163

8164 23 18164 28164 38164

8165 23 18165 28165 38165

8169 24 18169 28169 38169

8170 23 18170 28170 38170

8200 14 18200 28200 38200

8200CRP 14 18200277 28200277 38200277

8200WC 29 1820092 2820092 3820092

8225 14 18225 28225 38225

8226 14 18226 28226 38226

INDEX AND INFOFAX CODES

Model Catalog Specification Installation Operation &

Page # Sheet Drawings Maintenance

8300 15 18300 28300 38300

8300CRP 15 18300277 28300277 38300277

8300.157 15 18300157 28300157 38300157

8300.158 15 18300158 28300158 38300158

8300FP 15 1830037 2830037 3830037

8309 16 18309 28309 38309

8309PCP 16 18309727 28309727 38309727

8309WC 30 1830992 2830992 3830992

8317 16 18317 28317 38317

8317CTFPB 17 18317372 28317372 38317372

8317CTFPT 17 18317378 28317378 38317378

8320 16 18320 28320 38320

8327WC 17,31 1832792 2832792 3832792

8330 18 18330 28330 38330

8330FP 18 1833037 2833037 3833037

8335 18 18335 28335 38335

8336 18 18336 28336 38336

8346 19 18346 28346 38346

8347 19 18347 28347 38347

8355WC 25,31 1835592 2835592 3835592

8365EWFP 19 1836537 2836537 3836537

8410 19 18410 28410 38410

8560 20 18560 28560 38560

8590 20 18590 28590 38590

8600WC 20,31 1860092 2860092 3860092

8605 20 18605 28605 38605

8605SS 26 1860577 2860577 3860577

8710 32 18710 — —

8710.21 32 1871021 2871021 —

8710.22 32 1871022 2871022 —

8710.23 32 1871023 2871023 —

8710.24 32 1871024 2871024 —

8730 32 18730 28730 —

8760 32 18760 — —

8760.21 32 1876021 2876021 —

8760.22 32 1876022 2876022 —

8760.23 32 1876023 2876023 —

8760.24 32 1876024 2876024 —

8780 32 18780 — —

8780.21 32 1878021 2878021 —

8780.22 32 1878022 2878022 —

8780.23 32 1878023 2878023 —

8780.24 32 1878024 2878024 —

8901.6 34 189016 289016 389016

8901B 27 189012 289012 389012

8901RFK 34 18901735 28901735 38901735

8903 27 18903 28903 38903

8904 27 18904 28904 38904

8905 27 18905 28905 38905

8908 27 18908 28908 38908

9001 34 19001 29001 39001

9001EXP 34 19001397 29001397 39001397

9007 35 19007 29007 —

9008 35 19008 29008 —

9009 35 19009 29009 —

9010 35 19010 29010 —

9015 35 19015 — —

9018 35 19018 — —

9020 36 19020 29020 —

9021 36 19021 29021 —

9022 36 19022 29022 —

9037 36 19037 29037 39037

9040 36 19040 29040 —

9070 37 19070 — —

9081 37 19081 — 39081

9090 37 19090 — —

9094 37 19094 — —

9095 37 19095 — —

9098 37 19098 — —

9101 37 19101 29101 39101

9102 37 19102 29102 39102

9201 38 19201 29201 39201

9202 38 19202 29202 39202

TWBS.EW 33 1892739 2892739 3892739

TWBS.EWH 33 18927394 28927394 38927394

TWBS.SH 33 1892774 2892774 3892774

3


7000

S E R I E S

7100

S E R I E S

4

7000BT

7001

Using foot treadle activation

7100BT

7101

Omni-Flo

■ 7000BT

Wall mounted with trap

■ 7000B*

Wall mounted with waste tailpiece

■ 7001

Pedestal mounted with floor flange

ABS Plastic Bowl

Specifications

Receptor: Safety Green ABS plastic with UV

stabilizers resistant to damage from alkalies, salt

solutions, oils, most acids, sun exposure, color

change and brittleness.

Head: Patented Omni-Flo, wrap-around spray head

provides superior spray pattern that gently covers

entire facial area. Includes permanent, one-piece,

hinged dust cover of bright yellow durable ABS

plastic. Positive link actuation assures instant opening,

while providing positive cover retention.

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem. Model 7001

offers push flag and foot treadle activation.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991

designating safety and location of first aid and safety

equipment.

Stream Control: Steady water flow under varying

pressures assured with automatic pressure compensation

devices for 30-90 PSI. The single wide orifice

flow control can be serviced if clogging occurs (or

exchanged if high or low water pressure is present.)

Strainer: Fully serviceable in-line, 50x50 mesh

strainer filters debris from reaching the eyewash.

■ 7100BT RS

Wall mounted with trap

■ 7100B* RS

Wall mounted with waste tailpiece

■ 7101

Pedestal mounted with floor flange

Specifications

Receptor: Safety Green ABS plastic resistant to damage

from alkalies, salt solutions, oils, most acids.

Heads: Twin Soft-Flo** patented ABS plastic antisurge

eyewash heads in Safety Green (Model SP11).

Dust covers protect heads and automatically release

with water pressure.

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Stream Control: Steady water flow under varying

pressures assured with automatic pressure compensation

devices for 30-90 PSI. The single wide orifice

flow control can be serviced if clogging occurs (or

exchanged if high or low water pressure is present.)

Strainer: Fully serviceable in-line, 50x50 mesh

strainer filters debris from reaching the eyewash.

Removable cartridge on underside allows for easy

cleaning.

EYE/FACE WASH

Filter System: Internal foam filters for reliable

operation and easy removal for cleaning and maintenance.

Mounting: Integral stainless steel wall

bracket. Model 7001 has 9" diameter floor flange

and 1 1 ⁄4" hot dipped galvanized steel pipe pedestal

with a 21" long self adhesive high

visibility stripe in Safety Green and bright

yellow to improve visibility.

Trap: 1 1 ⁄2" IPS satin chrome plated trap.

Details

Supply: 1 ⁄2" IPS (Complete separation of supply and

waste)

Waste: 7000BT -1 1 ⁄2" IPS, 7000B -1 1 ⁄4" O.D.

tailpiece, 7001 -1 1 ⁄4" IPS

Shipping Weight: 7000BT -12 lbs.,

7000B -11lbs., 7001 -22 lbs.

Options (Additional Cost)

Model TWBS.EW: Tempered water blending

system specially designed for eyewash units.

7000B, 7000BT

Model SP220W: Wall mounted foot control

assembly allows user to operate without hands.

7001

CRP Green Coating: Additional protection against

corrosive atmospheres.

*Patent No. 5,008,963

EYEWASH

Mounting: Integral high strength ABS plastic wall

bracket. Model 7101 has 9" diameter floor flange

and 1 1 ⁄4" hot dipped galvanized steel pipe pedestal

with a 21" long self adhesive high

visibility stripe in Safety Green and bright

yellow to improve visibility.

Trap: 1 1 ⁄2" IPS satin chrome plated trap.

Details

Supply: 1 ⁄2" IPS (complete separation of supply and

waste)

Waste: 7100BT -11 ⁄2" IPS, 7100B -11 ⁄4" O.D.

tailpiece, 7101 - 11 ⁄4" IPS

Shipping Weight:

7100BT -8 lbs., 7100B -7 lbs., 7101 -20 lbs.

*Patent Pending

**Patent No. 3,809,315


EYE/FACE WASH

■ 7120BT RS

Wall mounted with trap

■ 7120B* RS

Wall mounted with waste tailpiece

■ 7121 RS

Pedestal mounted with floor flange

Specifications

Receptor: Safety Green ABS plastic resistant to

damage from alkalies, salt solutions, oils, most

acids.

Heads: Twin Feather-Flo** patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Stream Control: Steady water flow under varying

pressures assured with automatic pressure compensation

devices for 30-90 PSI. The single wide orifice

flow control can be serviced if clogging occurs (or

exchanged if high or low water pressure is present.)

Strainer: Fully serviceable in-line, 60x50 mesh

strainer filters debris from reaching the eyewash.

Removable cartridge on underside allows for easy

cleaning.

■ 7260BT RS

Wall mounted with trap

■ 7260B* RS

Wall mounted with waste tailpiece

■ 7260

Unmounted

EYEWASH

Specifications

Receptor: Safety Green ABS plastic resistant to

damage from alkalies, salt solutions, oils, most

acids.

Head: Twin Soft-Flo** patented ABS plastic antisurge

eyewash heads in Safety Green (Model SP11).

Dust covers protect heads and automatically release

with water pressure.

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Strainer: Fully serviceable in-line, 50x50 mesh

strainer filters debris from reaching the eyewash.

Mounting: Anodized aluminum wall bracket.

Trap: 1 1 ⁄2" IPS satin chrome plated trap.

Mounting: Integral high strength ABS plastic wall

bracket. Model 7121 has 9" diameter floor flange

and 1 1 ⁄4" hot dipped galvanized steel pipe pedestal

with a 21" long self adhesive high visibility stripe in

Safety Green and bright yellow to improve visibility.

Trap: 1 1 ⁄2" IPS satin chrome plated trap.

Details

Supply: 1 ⁄2" IPS

Waste: 7120BT -11 ⁄2" IPS, 7120B -11 ⁄4" IPS,

7121 -11 ⁄4" IPS

Shipping Weight: 7120BT -8 lbs.,

7120B -7 lbs., 7121 -20 lbs.

*Patent Pending

**Patent No. 3,602,436

7120B

Details

Supply: 1 ⁄2" IPS

Waste: 7260BT -1 1 ⁄2" IPS, 7260B -1 1 ⁄4" O.D.

tailpiece, 7260 -1 1 ⁄4" IPS

Shipping Weight: 7260BT -8 lbs.,

7260B -7 lbs., 7260 -7 lbs.

Options (Additional Cost)

Model SP220W: Wall mounted foot

control assembly allows user to activate

without hands.

Model TWBS.EW: Tempered water

blending system specially designed for eyewash

units.

*Patent Pending

**Patent No. 3,809,315

ABS Plastic Bowl

ABS Plastic Bowl

7260BT

7121

7120

S E R I E S

7260

S E R I E S

5


7261

S E R I E S

7300

S E R I E S

6

7324

Pedestal with ABS Plastic Bowl

7261

Push flag activation

7361

Stainless Steel Bowl

7360BT

With optional 9001 dust cover

■ 7261

Pedestal mounted with floor flange

Specifications

Receptor: Safety Green ABS plastic resistant to

damage from alkalies, salt solutions, oils, most

acids.

Head: Twin Soft-Flo* patented ABS plastic antisurge

eyewash heads in Safety Green (Model SP11).

Dust covers protect heads and automatically release

with water pressure.

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Strainer: Fully serviceable in-line, 50x50 mesh

strainer filters debris from reaching the eyewash.

Mounting: 9" diameter floor flange and 1 1 ⁄4" hot

dipped galvanized steel pipe pedestal with a 21" long

self adhesive high visibility stripe in Safety Green

and bright yellow to improve visibility.

■ 7360BT RS

Wall mounted with trap

■ 7360B RS

Wall mounted with waste tailpiece

■ 7360

Unmounted

■ 7361

Pedestal mounted with floor flange

■ 7324

Wall mounted without receptor

Specifications

Receptor: 11" stainless steel with #7 bright finish

on exterior.

Head: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem. Model 7361

offers push flag and foot treadle activation.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Strainer: Fully serviceable in-line, 50x50 mesh

strainer filters debris from reaching the eyewash.

(Not included on Model 7324)

EYEWASH

Details

Supply: 1 ⁄2" IPS

Waste: 1 1 ⁄4" IPS

Shipping Weight: 20 lbs.

Options (Additional Cost)

CRP Green Coating: Additional protection

against corrosive atmospheres.

Model TWBS.EW: Tempered water blending

system specially designed for eyewash units.

Model TWBS.EWH: Instantaneously heated

tempered water system specially designed for eyewash

units.

*Patent No. 3,809,315

EYE/FACE WASH

Mounting: Anodized aluminum wall bracket. Model

7361 has 9" diameter floor flange and 1 1 ⁄4" hot

dipped galvanized steel pipe pedestal with a 21" long

self adhesive high visibility stripe in Safety Green

and bright yellow to improve visibility. Model 7324

has high strength ABS plastic wall bracket.

Trap: 1 1 ⁄2" IPS satin chrome plated trap.

Details

Supply: 1 ⁄2" IPS

Waste: 7360BT -1 1 ⁄2" IPS, 7360B -1 1 ⁄4" O.D.

tailpiece, 7360 -1 1 ⁄4" IPS, 7361 -1 1 ⁄4" IPS

Shipping Weight: 7360BT -8 lbs., 7360B -7 lbs.,

7360 -7 lbs., 7361 -20 lbs., 7324 -6 lbs

Options (Additional Cost)

7360 Series

Model SP220W: Wall mounted foot control

assembly allows user to activate without hands.

Model 9101: ABS dust cover assembly protects

unit from dust and other environmental

contamination. Pressure on flag raises cover and

activates eyewash.

Model 9102: Stainless steel dust cover

assembly protects unit from dust and other

environmental contamination. Pressure on

flag raises cover and activates eyewash.

Model TWBS.EW: Tempered water blending

system specially designed for eyewash units.

*Patent No. 3,602,436


■ 7460BT

Wall mounted with trap

■ 7460B

Wall mounted with waste tailpiece

■ 7460 RS

Unmounted

■ 7461 RS

Pedestal mounted with floor flange

■ 7433FP RS

Wall mounted with freeze resistant valve

EYEWASH

Specifications

Receptor: 11" stainless steel with #7 bright finish

on exterior.

Head: Twin Soft-Flo* patented ABS plastic antisurge

eyewash heads in Safety Green (Model SP11).

Dust covers protect heads and automatically release

with water pressure.

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem. Model 7461

offers push flag and foot treadle activation. On Model

7433FP the supply originates and drains within interior

of building after each operation. Special shaft

extension allows valve to be located in tempered

environment to protect against freezing. Shaft length

accommodates maximum 15" wall thickness.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Strainer: Fully serviceable in-line, 50x50 mesh

strainer filters debris from reaching the eyewash.

(Not included on 7433FP)

Mounting: Anodized aluminum wall bracket.

Model 7461 has 9" diameter floor flange and 1 1 ⁄4"

hot dipped galvanized steel pipe pedestal with a 21"

long self adhesive high visibility stripe in Safety

Green and bright yellow to improve visibility.

Trap: 1 1 ⁄2" IPS satin chrome plated trap. (Not

included on 7433FP)

Details

Supply: 1 ⁄2" IPS

Waste: 7460BT -1 1 ⁄2" IPS, 7460B -1 1 ⁄4" O.D.

tailpiece, 7460 -1 1 ⁄4" IPS, 7461 -1 1 ⁄4" IPS,

7433FP -1 1 ⁄4" IPS

Shipping Weight: 7460BT -8 lbs., 7460B -7 lbs.,

7460 -7 lbs., 7461 -21 lbs., 7433FP -11 lbs.

Options (Additional Cost)

CRP Green Coating: Additional protection against

corrosive atmospheres.

7460, 7460B, 7460BT, 7461

Model 9101: ABS dust cover assembly

protects unit from dust and other environmental

contamination. Pressure on flag raises cover and

activates eyewash.

Model 9102: Stainless steel dust cover

assembly protects unit from dust and other

environmental contamination. Pressure on

flag raises cover and activates eyewash.

Model TWBS.EW: Tempered water blending

system specially designed for eyewash units.

Model TWBS.EWH: Instantaneously heated

tempered water system specially designed for

eyewash units.

7460B, 7460BT

Model SP220W: Wall mounted foot control

assembly allows user to operate without hands.

*Patent No. 3,809,315

Stainless Steel Bowl

7460BT

With optional 9101 dust cover

7433FP

Freeze Resistant

7461

7400

S E R I E S

7


7700

S E R I E S

7777

7778B

8

Face

Spray Ring

7763

Stainless

Steel

7760BT

7777

7778B

■ RS 7760BT

Wall mounted with trap

■ RS 7760B

Wall mounted with waste tailpiece

■ 7760

Unmounted

■ 7720 RS

Pedestal mounted with floor flange

■ 7721RS

Pedestal mounted with floor flange and without

foot treadle

■ 7763

Pedestal mounted with floor flange plus hand

held hose and spray

Specifications

Receptor: 11" stainless steel with #7 bright finish on

exterior.

Head: Twin Soft-Flo* patented ABS plastic anti-surge

eyewash heads in Safety Green (Model SP11). Dust

covers protect heads and automatically release

with water pressure.

Spray Ring: Raised, circular stainless steel with 16

spray openings to bathe entire facial area (Model SP30).

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem. Models 7720 and

7763 offer push flag and foot treadle activation.

Dust cover: ABS plastic in Safety Green completely

covers bowl and protects unit from dust and other environmental

contamination. Pressure on flag raises cover

(Model 9101†).

Body Spray: Model 7763 is equipped with eye/face

and body spray with Feather-Flo** patented ABS plastic

spray head (Model SP21) operated with stay open

squeeze lever handle valve mounted on 8’ heavy duty

rubber hose.

■ 7777

Pedestal mounted with stainless steel

components

Specifications

Receptor: 11" stainless steel with #7 bright finish on exterior.

Head: Twin Soft-Flow* patented stainless steel anti-surge

eyewash heads (Model SP18). Dust covers protect heads and

automatically release with water pressure.

Spray Ring: Raised, circular stainless steel with 16 spray

openings to bathe entire facial area (Model SP30).

Activation: Stainless steel push flag and foot treadle operate

a stay open type 316 stainless steel ball valve.

Dust cover: ABS plastic in Safety Green completely covers

bowl and protects unit from dust and other environmental

contamination. Pressure on flag raises cover (Model 9101†).

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety equipment.

Stream Control: Steady water flow under varying pressures

assured with dual automatic pressure compensation devices.

Strainer: Fully serviceable in-line, 50x50 mesh strainer filters

debris from reaching the eyewash.

Mounting: 9" diameter floor flange and type 304 stainless

steel pipe pedestal with a 21" long self adhesive high visibility

stripe in Safety Green and bright yellow to improve visibility.

Details

Supply: 1 ⁄2"IPS

Waste: 11 ⁄4"IPS

Shipping Weight: 27 lbs.

Options

Model TWBS.EW: Tempered water blending

system specially designed for eyewash units.

† Full dust cover required to meet ANSI Standard and

CSA certification.

*Patent No. 3,809,315

EYE/FACE WASH

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety equipment.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure compensation

devices.

Strainer: Fully serviceable in-line, 50X50 mesh strainer

filters debris from reaching the eyewash.

Mounting: Anodized aluminum wall bracket. Models

7720 and 7763 have 9" diameter floor flange and 11 ⁄4"

hot dipped galvanized steel pipe pedestal with a 21"

long self adhesive high visibility stripe in Safety Green

and bright yellow to improve visibility.

Trap: 11 ⁄2" IPS satin chrome plated trap.

Details

Supply: 1 ⁄2" IPS

Waste: 7760BT -11 ⁄2" IPS, 7760B -11 ⁄4" O.D.

tailpiece, 7760 -11 ⁄4" IPS, 7720 -11 ⁄4" IPS,

7763 -11 ⁄4" IPS

Shipping Weight: 7760BT -9 lbs., 7760B -8 lbs.,

7760 -8 lbs., 7720 -24 lbs., 7763 -24 lbs.

Options (Additional Cost)

Model TWBS.EW: Tempered water blending system

specially designed for eyewash units.

7720, 7763

CRP Green Coating: Additional protection against

corrosive atmospheres.

7760B, 7760BT

Model SP220W: Wall mounted foot control

assembly allows user to operate without hands.

*Patent No. 3,809,315,

†Full dust cover required to meet ANSI Standard and

CSA certification.

**Patent No. 3,602,436

■ 7778B

Wall mounted with stainless steel components

Specifications

Receptor: 11" stainless steel with #7 bright finish on exterior.

Head: Twin Soft-Flow* patented stainless steel anti-surge

eyewash heads (Model SP18). Dust covers protect heads and

automatically release with water pressure.

Spray Ring: Raised, circular stainless steel with 16 spray

openings to bathe entire facial area (Model SP30).

Activation: Stainless steel push flag operates a stay open

type 316 stainless steel ball valve.

Dust cover: ABS plastic in Safety Green completely

covers bowl and protects unit from dust and other environmental

contamination. Pressure on flag raises cover (Model

9101†).

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating safety

and location of first aid and safety equipment.

Stream Control: Steady water flow under varying pressures

assured with dual automatic pressure compensation devices.

Strainer: Fully serviceable in-line, 50x50 mesh strainer filters

debris from reaching the eyewash.

Mounting: Stainless steel wall bracket.

Details

Supply: 1 ⁄2" IPS

Waste: 11 ⁄2" O.D. tailpiece

Shipping Weight: 12 lbs.

Options (Additional Cost)

CRP Green Coating: Additional protection against corrosive

atmospheres.

Model TWBS.EW: Tempered water blending

system specially designed for eyewash units.

† Full dust cover required to meet ANSI Standard and

CSA certification.

*Patent No. 3,809,315


PORTABLE

■ 7500

Specifications

Tank: 16 gallon capacity. FDA high-density polyethylene

material.

Portability: Has single top handle for easy carrying

when empty and dual double-wide integral side handles

to facilitate two person handling when filled.

Features: Threaded cap and wide fill opening for

easy filling, inspection and cleaning. In stand-by

position, eyewash heads are protected in a recessed

area from airborne debris. Drain hose provided with

unit. No loose parts to get lost or damaged.

Color: Highly visible yellow arm distinguishes itself

from the Safety Green tank allowing it to be located

and activated.

Flushing Time: Over 15 minutes of full flow pattern

at not less than 0.4 GPM (1.5 liters per minute).

Mounting: Can be wall mounted (bracket included)

or shelf mounted.

Hydrosep: Bacteriostatic additive to permit storage

of water for several months (Model 9081).

Details

Measurements: 221 ⁄2" high, 211 ⁄2" wide, 191 RS

⁄2" deep

Shipping Weight: 17 lbs.

PORTABLE

RS ■ 7500EB

Specifications

Tank: 16 gallon capacity. FDA high-density polyethylene

material.

Heating System: Tempered water model is

warmed by a 1000-watt heater and comes equipped

with fitted, insulated protective cover. Thermostatic

controls maintain water temperature at an average of

75°F (24°C). Temperature and safety controlled by

two thermostats. Control maintains desired water

temperature. Safety over-ride thermostat with

warning light and manual reset button helps prevent

overheating in the event of primary thermostat failure.

Electrical System: Plugs into any grounded 110volt

line. Grounded and weather tight. All UL-listed

electrical components. Three lighted indicators tell if

power is on, heater is activated or there is a malfunction.

Ground fault interrupt recommended.

Flushing Time: Over 15 minutes of full flow pattern

at not less than 0.4 GPM (1.5 liters per minute).

Hydrosep: Bacteriostatic additive to permit storage

of water for several months (Model 9081).

Options (Additional Cost)

Model 9125: Thermal protection jacket.

Recommended for areas where extreme heat or

sunlight might cause water to overheat.

Model 9008: Cart

Model 9009: Waste water container

9125

7500 shown with optional

9125 thermal jacket

Details

Measurements: 22 1 ⁄2" high, 21 1 ⁄2" wide, 19 1 ⁄2" deep

Shipping Weight: 25 lbs.

Options (Additional Cost)

Model 9008: Cart

Model 9009: Waste water container

9008 and 9009

Optional cart and waste water container

Gravity Operated Eyewash

7500

With optional 9008 cart and 9009

waste water container

7500

Self Contained Heated Eyewash

7500

7500EB

S E R I E S

7500EB

9


7601

S E R I E S

7602

10

7601.37

9007- Optional cart

ASME Coded Eyewash

10 Gallon Eyewash

7602.15

7602.10

■ 7601.37

37 gallon capacity with cart

■ 7601.10.2

13 gallon capacity

Specifications

Tank: ASME coded stainless steel type 304, with

carrying handle. Air pressure filled through tire-type

air valve. Pressure gauge, safety release valve and

tire-type valve are mounted on the tank. Model

7601.37 has a 37 gallon capacity with 30 gallons of

usable water. ASME rating 110 PSI maximum working

pressure at 100°F. Air pressure filled to recommended

100 PSI. Relief valve set at 110. Model

7601.10.2 has a 13 gallon capacity with 7 1 ⁄2 gallons

of usable water. ASME rating 130 PSI maximum

working pressure at 100°F. Air pressure filled to recommended

87 PSI. Relief valve set at 120.

Heads: Twin Soft-Flo* patented ABS plastic antisurge

eyewash heads in Safety Green (Model SP12).

Dust covers protect heads and automatically release

with water pressure.

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Body Spray: Equipped with eye/face and body

wash with Feather-Flo** patented ABS plastic spray

head (Model SP21) operated with stay open squeeze

lever handle valve mounted on 6’ heavy duty rubber

hose.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

■ 7602.10 RS

10 gallon capacity

■ RS 7602.15

15 gallon capacity. Features 10 gallons of

useable water offering increased eyewash

flow duration

■ 7602.10TW

10 gallon capacity with heater and insulating

jacket for tempered water

Specifications

Tank: 10 gallon capacity with 7 1 ⁄2" gallons of usable

water, stainless steel with carrying handle. Air pressure

filled through tire-type valve to recommended

87 PSI. Pressure gauge, safety relief valve (set at 120

PSI), and tire-type valve are mounted on the tank.

Additional relief valve built into tank cover.

Heads: Twin Soft-Flo* patented ABS plastic antisurge

eyewash heads in Safety Green (Model SP12).

Dust covers protect heads and automatically release

with water pressure.

Heating System: Model 7602.10TW only, 600

watt tank heater with dual thermostats and thermofuses

safely keeps water temperature between 65°F

and 85°F (18°C to 29°C). Includes insulating jacket.

Requires 120 A.C. to operate.

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

PORTABLE

Hydrosep: Bacteriostatic additive to permit storage

of water for several months (Model 9081).

Details

Measurements: 7601.37 -overall height with cart,

60"x27" deep, 7601.10.2 -overall height 44",

diameter 12 1 ⁄4"

Shipping Weight: 7601.37 -161 lbs., less cart -

112 lbs., 7601.10.2 -55 lbs.

Options

7601.37 without cart (Less cost)

Model 9007: Cart for 7601.10.2

(Additional cost)

*Patent No. 3,809,315 **Patent No. 3,602,436

PORTABLE

7601.10.2

With optional 9007 cart

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Hydrosep: Bacteriostatic additive to permit storage

of water for several months (Model 9081).

Details

Measurements: Overall height, 43", 12 1 ⁄4"

diameter

Shipping Weight: 7602.10 -25 lbs.,

7602.10TW -27 lbs.

For ASME Coded stainless steel tank see Model

7601.10.2

Options (Additional Cost)

Model 9007: Cart for ease of mobility.

7602.10

Model 8901.6: Eye/face and body spray

with ABS plastic Feather-Flo** spray head with

integral flip top dust cover (Model SP21) operated

with stay open squeeze lever handle valve

mounted on 6' heavy duty rubber hose.

*Patent No. 3,809,315 **Patent No. 3,602,436

7602.10TW


DRENCH SHOWER

■ 8100

Specifications

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Standard: 9" diameter floor flange and 11 ⁄4" hot dip

galvanized steel pipe with two 21" long self adhesive

high visibility stripes in Safety Green and bright

yellow to improve visibility.

Details

Supply: 1 1 ⁄4" IPS

Shipping Weight: 35 lbs.

Options (Additional Cost)

Model 8127: Stainless steel shower head.

CRP Green Coating: Additional protection

against corrosive atmospheres.

Model TWBS.SH: Tempered water blending

system designed for showers and eyewashes.

■ 8111FP

Specifications

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel stem. Special shaft extension

allows valve to be located in tempered environment

to protect against freezing. Shaft length accommo-

■ RS 8122H

ABS shower head - horizontal supply

■ 8122V RS

ABS shower head - vertical supply

Specifications

Head: 10" ABS plastic in Safety Green (Model

8129).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Piping: 1" hot dip galvanized steel pipe.

Details

Supply: 1" IPS

Shipping Weight: 8122H -7 lbs., 8122V -6 lbs.

Options (Additional Cost)

CRP Green Coating: Additional protection

against corrosive atmospheres.

Model 8901RFK: Eye/face and body spray

with ABS plastic Feather-Flo* spray head with

integral flip top dust cover (Model SP21) operated

with stay open squeeze lever handle valve

mounted on 8' heavy duty rubber hose.

*Patent No. 3,602,436

dates maximum 15" wall thickness and can be operated

from left or right side.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Mounting: Shower pipe support rod and bracket

supplied.

Details

Supply: 1" IPS

Shipping Weight: 10 lbs.

Options (Additional Cost)

Model 8127: Stainless steel shower head.

CRP Green Coating: Additional protection

against corrosive atmospheres.

For freeze resistant wall-mounted eyewash see

Model 7433FP.

8122H

8100

Floor

Mounted,

Plastic Head

Wall Mounted,

Freeze Resistant

ABS

Plastic Head

8122V

Push flag activation

8100

8111FP

8111FP

Supply piping by others

8122H

8122V

11


8123Cable Heated Freeze Resistant DRENCH SHOWER

H C T F P

12

Alarm Options

(additional cost)

8317NEMA41DLT

Optional NEMA4 indicator light

8317NEMA4LT

Optional NEMA4 area light

8317NEMA71DLT

Optional NEMA4 indicator light

8317NEMA7LT

Optional NEMA7 area light

■ 8123HCTFP

Horizontal supply

Heat traced horizontal drench shower for installation

into the wall of a heated area. Standard models are

explosion proof CLASS 1, Division 2, Group B, C, D.

(Class 1, Division 1 available on request).

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem.

Jacket: Safety Green, UV resistant, ABS plastic with

removable polyethylene foam insulation. Includes

elastomeric seal for added weather protection.

Electric Cable: Reliable self-regulating heat cable

with external braid, guards against overheating and

cold spots. FM and CSA approved. CLASS 1,

Division 2, Group B, C, D. NEC T6 185°F(85°C).

Thermostat: The temperature control thermostat

shuts off heat at 57°-67°F(8°C-11°C ). CLASS 1,

Division 2, Group B, C, D explosion proof.

Freeze Protection Bleed Valve: (Model

SP158A) Flushes water through line when internal

water temperature drops below 35°F(2°C). Closes at

45°F(7°C).

Junction Box: CLASS 1, Division 1, Group B, C, D

supplied with units.

Power Supply: 120V, 60HZ single phase, AC.

AMP Loading: .7 AMPS, 80 watts 50°F internal unit

temperature.

Mounting: Stainless steel wall plate with lock-inplace

coupler.

Details

Supply: 1" IPS, with 18" of electric cable lead.

Options (Additional Cost)

Model 8127: Stainless steel shower head.

Model 9001: Weatherproof alarm (CL1, DIV 2

on request)

Model 8317NEMA4IDLT: NEMA 4 indicator

light kit. When lighted, indicates that power is

being supplied to shower.

Model 8317NEMA7IDLT: NEMA 7 indicator

light kit, CLASS 1. Div. 2,Group B, C, D

Model 8317NEMA4LT: Vapor tight and gasketed

NEMA 4 green area light for continuous illumination

of shower, CLASS 1, Div. 2, Group B,

C,D. "T2B"

Model 8317NEMA7LT: Explosion proof white

area light for Class 1, Div. 1, Group C and D.

"T3C"


DRENCH SHOWER

■ RS 8123H

Stainless steel shower head

-horizontal supply

■ 8123V RS

Stainless steel shower head

- vertical supply

Specifications

Head: 10" stainless steel head (Model 8127).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem.

Sign: Universal emergency sign included.

Piping: 1" hot dip galvanized steel pipe.

Details

Supply: 1" IPS

Shipping Weight: 8123H -10 lbs., 8123V -7 lbs.

Options (Additional Cost)

CRP Green Coating: Additional protection against

corrosive atmospheres.

Model 8901RFK: Eye/face and body spray with

ABS plastic Feather-Flo* spray head with integral flip

■ 8130H

ABS shower head with stainless steel valve

- horizontal supply

■ 8130V

ABS shower head with stainless steel valve

- vertical supply

Specifications

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Rigid stainless steel pull rod operates a

stay open type 316 stainless steel ball valve.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Piping: Heavy duty schedule 80 PVC painted in

Safety Green. (8130H)

Details

Supply: 1" IPS

Shipping Weight: 8130H -9 lbs., 8130V -5 lbs.

■ 8133H

Stainless steel shower head, piping and

valve - horizontal supply

■ 8133V

Stainless steel shower head, piping and

valve - vertical supply

Specifications

Head: 10" stainless steel head (Model 8127).

Activation: Rigid stainless steel pull rod operates

a stay open type 316 stainless steel ball

valve.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991

designating safety and location of first aid and

safety equipment.

Piping: All fittings and pipe are type 304 stainless

steel.

Details

Supply: 1" IPS

Shipping Weight: 8133H -9 lbs., 8133V -5 lbs.

top dust cover (Model SP21) operated

with stay open squeeze lever handle

valve mounted on 8’ heavy duty

rubber hose.

Polish Chrome Plated: For all

PCP specify model 8123HPCP

*Patent No. 3,602,436

8130H

8133H

8123V

Stainless

Steel Head

Corrosion

Resistant

8130V

8133V

8123H

Stainless

Steel

8123H

8123V

8130H

8130V

8133H

8133V

13


8200

8200CRP

14

OmniFlo

■ 8200

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem.

Flow Control: 20.0 GPM chrome plated brass

assembly (Model SP38).

Standard: 9" diameter floor flange with 11 ⁄4" hot dip

galvanized steel pipe. Stanchion incorporates an

exclusive cast air gap/supply fitting that separates

supply and waste. Two 21" long self adhesive high

visibility stripes in Safety Green and bright yellow to

improve visibility.

Eye/Face Wash

Receptor: Safety Green ABS plastic with UV

inhibitors resistant to damage from alkalies, salt

solutions, oils, most acids, sun exposure, color

change and brittleness.

8225

8226

ABS

Plastic Bowl

RS ■ 8225*

ABS plastic shower head with eyewash

■ RS 8226*

ABS plastic shower head with eye/face wash

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem.

Flow Control: Model 8226 only, has 20.0 GPM

chrome plated brass assembly (Model SP38).

Standard: 9" diameter floor flange with 1 1 ⁄4" hot dip

galvanized steel pipe. Stanchion incorporates an

exclusive cast air gap/supply fitting that separates

supply and waste. Two 21" long self adhesive high

visibility stripes in Safety Green and bright yellow to

improve visibility.

Eyewash & Eye/Face Wash

Receptor: Safety Green ABS plastic resistant to

damage from alkalies, salt solutions, oils, most

acids.

Heads: Model 8225 features Twin Soft-Flo**

patented ABS plastic anti-surge eyewash heads in

Safety Green (Model SP11). Dust covers protect

heads and automatically release with water pressure.

Heads: Patented Omni-Flo, wrap-around spray

head provides superior spray pattern that gently covers

entire facial area. Includes permanent, one-piece,

hinged dust cover of bright yellow durable ABS plastic.

Positive link actuation assures instant opening,

while providing positive cover retention.

Activation: Stainless steel push flag and foot treadle

operate a stay open chrome plated brass ball

valve that is equipped with a stainless steel ball and

stem.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Stream Control: Steady water flow under varying

pressures assured with automatic pressure compensation

devices for 30-90 PSI. The single wide orifice

flow control can be serviced if clogging occurs or

exchanged if high or low water pressure is present.

Strainer: Fully serviceable in-line, 50x50 mesh

strainer filters debris from reaching the eyewash.

Filter System: Internal foam filters for reliable

operation and easy removal for cleaning and maintenance.

Details

Supply: 1 1 ⁄4" IPS

Waste: 1 1 ⁄4" IPS

Shipping Weight: 51 lbs.

Patent No. 5,008,963

Model 8226 has Twin Feather-Flo*** patented ABS

plastic eye/face wash heads in Safety Green with

integral flip top dust covers that protect heads and

automatically release with water pressure (Model

SP21).

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Sign: Universal emergency sign

included.

Color: Safety Green, per ANSI Z535.1-

1991 designating safety and location of

first aid and safety equipment.

Stream Control: Steady water flow

under varying pressures assured with

automatic pressure compensation devices

for 30-90 PSI. The single wide orifice flow

control can be serviced if clogging occurs

or exchanged if high or low water pressure

is present.

Strainer: Fully serviceable in-line, 60x50

mesh strainer filters debris from reaching the

eyewash.

Details

Supply: 1 1 ⁄4" IPS

Waste: 1 1 ⁄4" IPS

Shipping Weight: 8225 -48 lbs., 8226 -48 lbs.

Options (Additional Cost)

CRP Green Coating: Additional protection

against corrosive atmospheres.

Model TWBS.SH: Tempered water blending

system designed for showers and eyewashes.

Model 9001: Alarm system

activated by shower or eyewash to summon help.

COMBINATION UNIT

■ 8200CRP

Same as Model 8200 except with CRP Safety Green

coating for additional protection against corrosive

atmospheres. Covers all exposed piping except

valves, bowl and head assembly.

Options (Additional Cost)

Barrier Free: Specify model

8200WC

Model TWBS.SH: Tempered water blending

system designed for showers and eyewashes.

Model 8127: Stainless steel shower head.

Model 9001: Alarm system activated by

shower or eyewash to summon help.

Model 9020: 3 sided ABS plastic

sign featuring universal pictorial of shower and

eyewash.

Model 9037: Privacy curtain wraps around to

enclose shower and user.

8226

Model 9020: 3 sided ABS plastic sign

featuring universal pictorial of shower

and eyewash.

Model 9037: Privacy curtain wraps

around to enclose shower and user.

*Patent Pending

**Patent No. 3,809,315

***Patent No. 3,602,436

8200CRP

8225

8200

8226


COMBINATION UNIT

8300

8300FP

RS ■ 8300

ABS shower head with stainless steel bowl

■ 8300CRP

Corrosion resistant coating for added protection

■ 8300.157

Equipped with scald protection bleed valve

■ 8300.158

Equipped with freeze protection bleed valve

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem.

Sign: Universal emergency sign included.

Standard: 9" diameter floor flange with 1 1 ⁄4" hot dip

galvanized steel pipe. Stanchion incorporates an

exclusive cast air gap/supply fitting that separates

supply and waste. Two 21" long self adhesive high

visibility stripes in Safety Green and bright yellow to

improve visibility.

Eyewash

Receptor: 11" stainless steel with #7 bright finish

on exterior.

Heads: Twin Soft-Flo* patented ABS plastic antisurge

eyewash heads in Safety Green (Model SP11).

Dust covers protect heads and automatically release

with water pressure.

Activation: Stainless steel push flag and foot treadle

operate a stay open chrome plated brass ball

valve that is equipped with a stainless steel ball and

stem. Model 8300.158 is push flag operated only.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Strainer: Fully serviceable in-line, 50x50 mesh

strainer filters debris from reaching the eyewash.

Distinctions

8300CRP Corrosion Resistant Coating: CRP

green coating for additional protection against corro-

■ 8300FP

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model

8129).

Activation: Single motion large zinc plated steel

push-plate. Valve stays open until manually closed.

Special freeze-proof valve (Model MK81A)

drains water from shower after closing to

prevent freezing. Specify depth of bury

required: 24", 42", 66".

Sign: Universal emergency sign included.

Standard: 9" diameter floor flange with 11 ⁄4"

hot dip galvanized steel pipe. Two 21" long

self adhesive high visibility stripes in Safety

Green and bright yellow to improve visibility.

Eyewash

Receptor: 11" stainless steel with #7 bright

finish on exterior.

Heads: Twin Soft-Flo* patented ABS plastic

anti-surge eyewash heads in Safety Green

(Model SP11). Dust covers protect heads and

sive atmospheres covering all exposed piping except

valves, bowl and head assemblies.

8300.157 Scald Protection Bleed Valve:

Recommended for high ambient temperature locations

where extreme heat or hot sun might cause

internal water overheating. Flushes water through

line when internal water temperature rises above

110°F (43°C). Closes at 95°F(35°C).

8300.158 Freeze Protection Bleed Valve:

Recommended for areas that experience occasional

“snap freezes”. Automatic thermal actuator bleed

valve opens when internal water temperature drops

below 35°F(2°C). Fully closes at 45°F(7°C). Ball

valves are self draining to prevent freezing.

Code Approved: In line air gap provided with unit.

Details

Supply: 1 1 ⁄4" IPS Waste: 1 1 ⁄4" IPS

Shipping Weight: 8300 -50 lbs., 8300CRP -50

lbs., 8300.157 -50 lbs., 8300.158 -52 lbs.

8300.158

Freeze protection bleed valve

automatically release with water pressure.

Activation: Single motion large zinc plated steel

push-plate. Valve stays open until manually closed.

Special freeze-proof valve (Model MK8A) drains

water from shower after closing to prevent freezing.

Specify depth of bury required: 24", 42", 66".

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Details

Supply: 1 1 ⁄4" IPS for shower, 3 ⁄4" IPS for eyewash.

Waste: 1 1 ⁄4" IPS for eyewash

Shipping Weight: 24”, 42”, 66” -54 lbs.

Options (Additional Cost)

Model 8127: Stainless steel shower head.

CRP Green Coating: Additional protection

against corrosive atmospheres.

Model 9020: 3 sided ABS plastic sign featuring

universal pictorial of shower and eyewash.

*Patent No. 3,809,315

Stainless

Steel Bowl

Options (Additional Cost)

Model 8127: Stainless steel shower head.

Model 9101: Dust cover assembly protects unit

from dust and other environmental contamination.

Pressure on flag raises cover and activates

eyewash.

Model TWBS.SH: Tempered water blending

system designed for showers and eyewashes.

*Patent No.3,809,315

8300.157

Scald protection bleed valve

Freeze

Resistant

8300

S E R I E S

8300FP

15


8309

8309PCP

16

Stainless

Steel Bowl

■ 8309*

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem.

Flow Control: 20.0 GPM chrome plated brass

assembly (Model SP38).

Sign: Universal emergency sign included.

Standard: 9" diameter floor flange with 11 RS

⁄4" hot dip

galvanized steel pipe. Stanchion incorporates an

exclusive cast air gap/supply fitting that separates

supply and waste. Two 21" long self adhesive high

visibility stripes in Safety Green and bright yellow to

improve visibility.

8317 Shower

and Eye/Face

RS Wash

■ 8317

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless stem.

8320 ABS

Plastic Bowl

■ 8320 RS

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model

8129).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem.

Eye/Face Wash

Receptor: 11" stainless steel with #7 bright finish

on exterior.

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Stainless steel push flag and foot treadle

operate a stay open chrome plated brass ball

valve that is equipped with a stainless steel ball and

stem.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Strainer: Fully serviceable in-line, 50x50mesh

strainer filters debris from reaching the eyewash.

Details

Supply: 1 1 ⁄4" IPS

Waste: 1 1 ⁄4" IPS

Shipping Weight: 48 lbs.

■ 8309PCP**

Model 8309PCP Combination Shower and Eye/Face

Wash with all polished chrome plated finish. Pull rod

activated shower head is high polished stainless

steel (Model 8127HP). Eye/Face Wash has stainless

steel receptor with Twin Feather-Flo Heads** and

offers push flag and foot treadle activation. Floor

flange, pipe and fittings are red brass with polished

chrome plated finish.

Flow Control: 20.0 GPM chrome plated brass

assembly (Model SP38).

Sign: Universal emergency sign included.

Standard: 9" diameter floor flange and 1 1 ⁄4" hot dip

galvanized steel pipe with two 21" long self adhesive

high visibility stripes in Safety Green and bright yellow

to improve visibility.

Eye/Face Wash

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Standard: 9" diameter floor flange with 1 1 ⁄4" hot dip

galvanized steel pipe. Stanchion incorporates an

exclusive cast air gap/supply fitting that separates

supply and waste. Two 21" long self adhesive high

visibility stripes in Safety Green and bright yellow to

improve visibility.

Eyewash

Receptor: Safety Green ABS plastic resistant to

damage from alkalies, salt solutions, oils, most

acids.

Heads: Twin Soft-Flo* patented ABS plastic antisurge

eyewash heads in Safety Green (Model SP11).

Dust covers protect heads and automatically release

with water pressure.

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Options

(Additional Cost)

Model 8127:

Stainless steel

shower head.

(Model 8309 only)

CRP Green Coating: Additional

protection against corrosive

atmospheres.

Model 9001: Alarm system

activated by shower or eyewash

to summon help.

Model 9020: 3 sided ABS plastic sign

featuring universal pictorial of shower

and eyewash.

Model 9101: ABS dust cover assembly

protects unit from dust and other environmental

contamination. Pressure on flag raises

cover and activates eyewash.

Model 9102: Stainless steet

dust covers assembly protects

unit from dust and other environmental

contamination.

Pressure on flag raises cover and

activates eyewash.

Model TWBS.SH: Tempered water blending

system designed for showers and eyewashes.

*Patent No. 3,602,436

**Patent No. 5,008,963

8309

Details

Supply: 1 1 ⁄4" IPS

Shipping Weight: 46 lbs.

COMBINATION UNIT

Options (Additional Cost)

Model 8127: Stainless steel shower head.

CRP Green Coating: Additional

protection against corrosive atmospheres.

Model TWBS.SH: Tempered

water blending system

designed for showers and

eyewashes.

Model 9001: Alarm system activated by

shower or eyewash to summon help.

Model 9020: 3 sided ABS plastic sign

featuring universal pictorial of shower and

eyewash.

*Patent No. 3,602,436

Strainer: Fully serviceable in-line, 50x50 mesh

strainer filters debris from reaching the eyewash.

Details

Supply: 1 1 ⁄4" IPS

Waste: 1 1 ⁄4" IPS

Shipping Weight: 47 lbs.

Options (Additional Cost)

Model 8127: Stainless steel shower

head.

CRP Green Coating: Additional protection

against corrosive atmospheres.

Model TWBS.SH: Tempered water blending

system designed for showers and eyewashes

*Patent No. 3,809,315

8320

8309PCP

8317


COMBINATION UNIT

8317CTFPB

With optional 9001 alarm system

8327WC

■ 8317CTFPT

Top supply

■ 8317CTFPB

Bottom supply

A fully assembled, ready to install, cable traced

freeze resistant unit with top or bottom supply.

Standard models are explosion proof CLASS

1, Division 2, Group B, C, D. and NEMA4

(Class 1, Division 1 available on request).

Specifications

Shower

Head: 10” ABS plastic in Safety Green (Model 8129).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem.

Flow Control: 20.0 GPM chrome plated brass

assembly (Model SP38).

Standard: 9” diameter floor flange with 1 1 ⁄4" hot dip

galvanized steel pipe.

Jacket: Safety Green, UV resistant, ABS plastic with

removable polyethylene foam insulation. Includes

elastomeric seal for added weather protection.

Eye/Face Wash

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Hose: Heavy duty UV resistant 4 ft. length. Allows

for spot washing of body, boots or equipment.

Activated by stainless steel push plate which operates

a stay open ball valve.

Total Unit

Electric cable: Reliable self-regulating heat cable

with external braid, guards against overheating and

cold spots. FM and CSA approved. CLASS 1,

Division 2, Group B, C, D. NEC T6 185°F(85°C).

Thermostat: The hermetically sealed temperature

control thermostat shuts off heat at 57°-67°F(8°C-

11°C ). CLASS 1, Division 2, Group B, C, D explosion

proof.

■ RS 8327WC

Specifications

Shower

Head: 10” ABS plastic in Safety Green (Model 8129).

Activation: Weight on 29”x32” hot dip galvanized

carbon steel diamond plate treadle opens chrome

plated brass self closing globe valve which simultaneously

activates both shower and eye/face wash.

Flow Control: 20.0 GPM chrome plated brass

assembly (Model SP38).

Standard: 9” diameter floor flange and 11 ⁄4" hot dip

galvanized steel pipe with two 21” long self adhesive

high visibility stripes in Safety Green and bright yellow

to improve visibility.

Eye/Face Wash

Heads: Twin Feather-Flo* patented ABS

plastic eye/face wash heads in Safety

Green with integral flip top dust covers that

protect heads and automatically release with

Freeze Protection Bleed valve: (Model

SP158A) Flushes water through line when internal

water temperature drops below 35°F(2°C). Closes at

45°F(7°C).

Junction box: CLASS 1, Division 1, Group B, C, D,

and NEMA4 supplied with units.

Power Supply: 120V, 60HZ single phase, AC.

AMP Loading: .7 AMPS, 80 watts 50°F internal

unit temperature.

Details

Supply: 1 1 ⁄4" IPS. Freeze protection of supply to unit

by others.

Shipping weight: 110 lbs.

Options (Additional Cost)

Model 8127: Stainless steel shower head.

Model 9001: Weatherproof alarm (CL1, DIV 2

on request)

Model 8317NEMA4IDLT: NEMA 4 indicator

light kit. When lighted, indicates that power is

being supplied to shower.

Model 8317NEMA7IDLT: NEMA 7 indicator

light kit, CLASS 1. Div. 2,Group B, C, D

Model 8317NEMA4LT: Vapor tight and gasketed

NEMA 4 green area light for continuous

illumination of shower, CLASS 1, Div. 2, Group

B, C,D. “T2B”

Model 8317NEMA7LT: Explosion proof white

area light for CLASS 1, Div. 1, Group C and D.

“T3C”

Model SP157A: Scald protection bleed valve

flushes water when internal temperature rises

above 110°F(43°C) to prevent the possibility of

scalding water. Closes at 95°F(35°C).

Recommended for areas where extreme heat or

hot sun might cause internal water overheating.

Model 8317CTFPEXP: Similar to Model

8317CTFP except explosion proof. CLASS 1,

Div. 1, Group C and D.

Model 8317CTFP.220V: Similar to Model

8317CTFP except 220 volt.

*Patent No. 3,602,436

water pressure (Model SP21).

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Details

Supply: 1 1 ⁄4" IPS

Shipping Weight: 78 lbs.

Options (Additional Cost)

Model 8127: Stainless steel shower head.

CRP Green Coating: Additional protection

against corrosive atmospheres.

Model TWBS.SH: Tempered water blending

system designed for showers and eyewashes.

Model 9001: Alarm system activated by

shower or eyewash to summon help.

Model 9020: 3 sided ABS plastic sign featuring

universal pictorial of shower and eyewash.

*Patent No. 3,602,436

Cable

Heated

Freeze Resistant

8317NEMA41DLT

Optional NEMA4

indicator light

8317NEMA71DLT

Optional NEMA4

indicator light

Treadle

Operated

Alarm Options

(additional cost)

8317

C T F P

8317NEMA4LT

Optional NEMA4

area light

8317NEMA7LT

Optional NEMA7

area light

8327WC

17


8330

18

Stainless

Steel

RS ■ 8330

Stainless steel

■ 8330FP

Stainless steel - freeze resistant

Specifications

Shower

Head: 10" stainless steel head (Model 8127).

Activation: Model 8330 features a single motion

rigid stainless steel pull rod operating a stay open

type 316 stainless steel ball valve. Model 8330FP

activated by large stainless steel push-plate. Valve

stays open until manually closed. Special stainless

steel freeze-proof valve (Model MK81ASS) drains

water from shower after closing to prevent freezing.

Specify depth of bury required: 24”,42”,66”.

Flow Control: 20.0 GPM stainless steel assembly.

8335

Stainless

Steel

■ 8335

Stainless steel, three piece welded subassemblies

provide quick assembly and

clean appearance.

Specifications

Shower

Head: 10" ABS plastic in Safety Green

(Model 8129).

Activation: Single motion rigid stainless steel pull

rod operating a stay open type 316 stainless steel

ball valve.

8336

Corrosion

Resistant PVC

■ 8336

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Rigid stainless steel pull rod operates a

stay open type 316 stainless steel ball valve.

Standard: 9" diameter stainless steel floor flange

with 1 1 ⁄4" type 304 stainless steel pipe and fittings.

Stanchion incorporates an exclusive cast air

gap/supply fitting that separates supply and waste.

Two 21" long self adhesive high visibility stripes in

Safety Green and bright yellow to improve visibility.

Eyewash & Eye/Face Wash

Receptor: 11" stainless steel with #7 bright finish

on exterior.

Heads: Twin Soft-Flow* patented stainless steel

anti-surge eyewash heads (Model SP18). Dust covers

protect heads and automatically release with

water pressure.

Face Spray Ring: Model 8330 only, raised, circular

stainless steel with 16 spray openings to bathe

entire facial area (Model SP30).

Activation: Rigid stainless steel push flag and foot

treadle operate a stay open type 316 stainless steel

ball valve. Model 8330FP activated by large stainless

steel push-plate. Valve stays open until manually

closed. Special stainless steel freeze-proof valve

(Model MK81ASS) drains water from shower after

closing to prevent freezing. Specify depth of bury

required: 24", 42", 66".

Dust Cover: Model 8330 only, ABS plastic in

Safety Green completely covers bowl and protects

unit from dust and other environmental contamination.

Pressure on flag raises cover (Model 9101†).

Standard: Stainless steel floor flange with 1 1 ⁄4" type

304 stainless steel pipe and tubing.

Eyewash & Eye/Face Wash

Receptor: 11" stainless steel with #7 bright finish

on exterior.

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Stainless steel push flag operates a stay

open type 316 stainless steel ball valve

Stream Control: : Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Details

Supply: 1 1 ⁄4" IPS

Waste: 1 1 ⁄4" IPS

Standard: Heavy duty Schedule 80 PVC Pipe and

Schedule 40 fittings.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Eyewash

Receptor: Safety Green ABS plastic bowl.

Heads: Twin Soft-Flo* patented ABS plastic antisurge

eyewash heads in Safety Green (Model SP11).

Dust covers protect heads and automatically release

with water pressure.

Activation: Stainless steel push flag operates a stay

open type 316 stainless steel ball valve

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Strainer: Model 8330 only, fully serviceable inline,

50x50 mesh strainer filters debris from reaching

the eyewash.

Details

Supply: 8330 -1 1 ⁄4" IPS, 8330FP shower and

eyewash -1 1 ⁄4" IPS

Waste: 1 1 ⁄4" IPS

Shipping Weight: 8330 -55 lbs.,

8330FP -24", 42", 66" -67 lbs.

Options (Additional Cost)

Model 8129: Shower head,

10” ABS plastic in Safety

Green. (Less cost)

Model 9001: Alarm system

activated by shower or eyewash

to summon help.

Model 9020: 3 sided ABS

plastic sign featuring universal

pictorial of shower and

eyewash.

*Patent No. 3,809,315

† Full dust cover required to meet ANSI

Standard and CSA certification.

COMBINATION UNIT

Options (Additional

Cost)

Model 9001: Alarm system activated

by shower or eyewash to summon

help.

Model 9020: 3 sided ABS plastic

sign featuring universal pictorial

of shower and eyewash.

Model 9101: ABS dust cover assembly protects

unit from dust and other enviornmental

contamination. Pressure on flag raises cover

and activates eye/face wash.

Model 9102: Stainless steel dust cover

assemly protects unit form dust and other

enviornmental contamination. Pressure on

flag raises cover and activates eye/face wash.

*Patent No. 3,809,315

8330FP

Details

Supply: 11 ⁄4" IPS

Waste: 11 8335

⁄2" PVC SLIP

Assembly: Unit shipped in two complete assembled

sections utilizing one threaded union connection

for easy installation.

Shipping Weight: 37 lbs.

Options (Additional Cost)

Model TWBS.SH: Tempered water blending

system designed for showers and eyewashes.

Model 9020: 3 sided ABS plastic sign featuring

universal pictorial of shower and eyewash.

*Patent No. 3,809,315

8330

8336


COMBINATION UNIT

8346

8365EWFP

8410

■ 8346

11 ⁄4" pipe standard

■ 8347

11 RS

⁄2" pipe standard

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem.

Flow Control: 20.0 GPM chrome plated brass

assembly (Model SP38).

Sign: Universal emergency sign included.

Standard: 9" diameter floor flange with 1 1 ⁄4" hot dip

galvanized steel pipe. Model 8347 supplied with

1 1 ⁄2" pipe. Stanchion on Model 8346 incorporates an

exclusive cast air gap/supply fitting that separates

supply and waste. Two 21" long self adhesive high

visibility stripes in Safety Green and bright yellow to

improve visibility.

■ 8365EWFP

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Single motion large zinc plated steel

push-plate. Both shower and eyewash activate

simultaneously. Valve stays open until manually

closed. Special freeze-proof valve (Model MK81A)

drains water from shower and eyewash after closing

to prevent freezing. Specify depth of bury required:

24",42",66".

Flow Control: 20.0 GPM chrome plated brass

assembly (Model SP38).

Sign: Universal emergency sign included.

Standard: 9" diameter floor flange and 11 ⁄4" hot dip

galvanized steel pipe with two 21" long self adhesive

high visibility stripes in Safety Green and bright yellow

to improve visibility.

■ 8410

Specifications

Shower

Head: 10" ABS plastic in Safety Green

(Model 8129).

Activation: Rigid stainless steel pull rod

operates a stay open chrome

plated brass ball valve that is equipped

with a stainless steel stem.

Sign: Universal emergency sign

included.

Flow Control: 20.0 GPM chrome

plated brass assembly (Model

SP38).

Standard: 11 ⁄4" hot dip galvanized

steel pipe. Stanchion incorporates

an exclusive cast air gap/supply fitting

that separates supply and

waste. Two 21" long self adhesive

high visibility stripes in Safety

Eye/Face Wash

Receptor: 11" stainless steel with #7 bright finish

on exterior.

Heads: Twin Soft-Flo* patented ABS plastic antisurge

eyewash heads in Safety Green (Model SP11).

Dust covers protect heads and automatically release

with water pressure.

Face Spray Ring: Raised, circular stainless steel

with 16 spray openings to bathe entire facial area

(Model SP30).

Activation: Stainless steel push flag and foot treadle

operate a stay open chrome plated brass ball

valve that is equipped with a stainless steel ball and

stem.

Dust Cover: ABS plastic in Safety Green completely

covers bowl and protects unit from dust and other

environmental contamination. Pressure on flag raises

cover (Model 9101†).

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Strainer: Fully serviceable in-line, 50x50 mesh

strainer filters debris from reaching the eyewash.

Eye/Face Wash

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Details

Supply: 1 1 ⁄4" IPS

Shipping Weight: 24”, 42”, 66” -61 lbs.

Options (Additional Cost)

CRP Green Coating: Additional protection

against corrosive atmospheres.

Model 9020: 3 sided ABS plastic sign featuring

universal pictorial of shower and eyewash.

*Patent No. 3,602,436

Green and bright yellow to improve visibility.

Platform: Base and railing are heavy gauge hot dip

galvanized steel with open steel grating treadle.

Eye/Face Wash

Receptor: 11" stainless steel with #7 bright finish

on exterior.

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Weight on 30"x30" open type galvanized

subway treadle grate opens chrome plated

brass self closing globe valve.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Details

Supply: 1 1 ⁄4" IPS

Waste: 1 1 ⁄4" IPS

Shipping Weight: 215 lbs.

Stainless

Steel Bowl

Freeze

Resistant

Platform

Mounted

8346

8347

Details

Supply: 8346 -1 1 ⁄4" IPS, 8347 -1 1 ⁄2" IPS

Waste: 8346 -1 1 ⁄4" IPS, 8347 -1 1 ⁄2" IPS

Shipping Weight: 8346 -48 lbs., 8347 -55 lbs.

Options (Additional Cost)

Model 8127: Stainless steel shower head.

CRP Green Coating: Additional protection

against corrosive atmospheres.

*Patent No. 3,809,315

† Full dust cover required to meet ANSI Standard and

CSA certification.

8365

E W F P

8410

Options (Additional Cost)

Model 8127: Stainless steel shower head.

CRP Green Coating: Additional protection

against corrosive atmospheres.

*Patent No.3,602,436

19


8560

8590

20

■ 8560

Designed for high hazard areas. Thorough drenching

of entire body within seconds.

Specifications

Shower

Nozzles: 22 chrome plated brass, full-cone, direction

pre-set, non-adjustable, plus four weep sprays

for drainage.

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel stem. Valve can be activated

when approached from either direction.

Panels: Safety Green ABS plastic with a universal

emergency sign.

Standard: Hot dip galvanized steel pipe.

8600WC

8605

Walk Through Shower

Details

Supply: 1" IPS

Shipping Weight: 230 lbs.

Options (Additional Cost)

Model TWBS.SH: Tempered water blending

system designed for showers and eyewashes.

Model 9021: 3 sided ABS plastic sign featuring

universal pictorial of shower.

■ 8590

For areas of high hazard where space is limited. Can

be mounted against a wall.

Specifications

Nozzles: 12 chrome plated brass, full-cone, direction

pre-set, non-adjustable, self-cleaning, plus two

weep sprays for drainage.

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel stem. Valve can be activated

when approached from either direction.

Sign: Universal emergency sign included.

Standard: Hot dip galvanized steel pipe.

Details

Supply: 1" IPS

Shipping Weight: 95 lbs.

Multiple Nozzles & Eye/Face Wash

Shower & Eye/Face Wash

■ 8600WC

Complete decontamination booths for areas where

excess water on floor may damage surroundings.

Can be installed flush to floor for Barrier Free access.

Specifications

Booth: Reinforced molded fiberglass, enclosed on

three sides, alkali and acid resistant, bright white

finish. Molded anchoring pads provided. Vertical

header and overhead are hot dip galvanized pipe.

Horizontal leads to nozzle are PVC.

Shower Nozzles: 7 chrome plated brass, direction

pre-set, full cone nozzles located over head and on

the sides of the shower booth.

Activation: Weight on treadle opens chrome plated

brass self closing globe valve which simultaneously

activates all shower nozzles and eye/face wash.

Sign: Large graphics identify the booth as an emergency

shower/eyewash station and assist in guiding

user to the front.

Eye/Face Wash

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Details

Supply: 1" IPS

Waste: 3" inside caulk

Shipping Weight: 400 lbs.

Options (Additional Cost)

Model 9040: Shower curtain for privacy and

water containment.

Model 9001: Alarm system activated by shower

or eyewash to summon help.

*Patent No. 3,602,436

■ 8605

For areas where excess water on floor may damage

surroundings. Can be installed flush to floor for

Barrier Free access.

Specifications

Booth: Reinforced molded fiberglass, enclosed on

three sides, alkali and acid resistant, bright white finish.

Molded anchoring pads provided. Vertical header

and overhead are hot dip galvanized pipe.

Shower

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem.

Flow Control: 20.0 GPM chrome plated brass

assembly (Model SP38).

Sign: Large graphics identify the booth as an emergency

shower/eyewash station and assist in guiding

user to the front.

Eye/Face Wash

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

DECONTAMINATION UNIT

Options (Additional Cost)

Model TWBS.SH: Tempered water

blending system designed for showers

and eyewashes.

Model 9021: 3 sided ABS plastic sign featuring

universal pictorial of shower.

COMBINATION UNIT

Details

Supply: 1 1 ⁄4" IPS

Waste: 3" inside caulk

Shipping Weight: 380 lbs.

Options (Additional Cost)

Model 9040: Shower curtain for privacy

and water containment.

Model 9001: Alarm system activated by

shower or eyewash to summon help.

*Patent No. 3,602,436

8600WC

Barrier free accessibility

8560

8590

8605


LABORATORY UNIT

■ 7301DM

Specifications

Receptor: 11" stainless steel with #4 satin finish.

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Pushing down on knob operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel stem.

Sign: Universal emergency sign included.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Mounting: Special mounting device secures bowl

to counter top.

Details

Supply: 1 ⁄2" IPS

Waste: 11 ⁄4" NPS

Shipping Weight: 11 lbs.

Options (Additional Cost)

Model 9022: 3 sided ABS plastic sign featuring

universal pictorial of an emergency eyewash.

*Patent No. 3,602,436

■ 7610

Single action swing down

■ 7611RS

Single action swing away

All polished chrome plated laboratory eye/face wash

units designed for counter or sink mounting. Model

7610 is single action swing down unit for sink back

or counter top mounting. Ideal for installations where

side counter space is limited. Model 7611 is single

action low profile swing away for mounting either

right or left side of sink mounting.

Specifications

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Model 7610 is activated by a single pull

down motion. Model 7611 is activated by swinging

forward. Single motion activates a unique polish

chrome plated stay open ball type valve.

Directional Sign: High impact styrene.

Sign: Universal emergency sign included.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Details

Supply: 1 ⁄2" O.D. slipjoint

Shipping Weights: 7 lbs.

*Patent No. 3,602,436

Deck Mounted Eye/Face Wash

7610

7611

7301DM

7610

7301DM

7610

7611

21


7612

7613

7650

S E R I E S

22

7651

7656WC

Pull Down Eye/Face Wash

7656WC

7613

7655WC

Eyewash LABORATORY UNIT

RS ■ 7612

Polished chrome plated for right side mounting

■ 7612LH

Polished chrome plated for left side mounting

■ 7613

Chrome plated for right side mounting

All models are swing away design for mounting on

counter top near or over sink. Unit leaves eyewash

clear of sink when not in operation and swings into

position during use. Model 7612 and 7612LH are all

polished chrome plated and are ideal for laboratory

installation. Model 7613 is rough chrome plated and

recommended for industrial applications.

7612

■ 7655WC

Recessed wall mounted - pull

down

■ 7650

Counter mounted - pull down

■ 7651

Wall mounted - pull down

Polished chrome plated pull down

laboratory eye/face wash with ABS

heads. Model 7655WC furnished with

fully recessed stainless steel cabinet

and extra long arms for Barrier

Free access.

Specifications

Heads: Twin Feather-Flo* patented

ABS plastic eye/face wash heads in

Safety Green with integral flip top dust

covers that protect heads and automatically

release with water pressure

(Model SP21).

■ 7656WC

Recessed wall mounted - pull down

Polished chrome plated pull down laboratory eyewash

with polished chrome plated heads. Furnished

with fully recessed stainless steel cabinet and

drainage pan designed for Barrier Free access.

Specifications

Heads: Polished chrome plated brass Soft-Flo*

anti-surge eyewash heads (Model SP10)..

Activation: Pull down drainage pan operates a polished

chrome plated brass ball type valve. Supply

stop and integral trap are supplied.

Sign: Universal emergency sign included.

Stream Control: Steady water flow under varying

pressures assured with automatic pressure compensation

device.

Cabinet: Fully recessed corrosion resistant, 16

gauge stainless steel mounting can with ABS tray

and pull handle.

Specifications

Heads: Models 7612 and 7612LH have twin Soft-

Flo* patented polished chrome plated brass antisurge

eyewash heads (SP10). Model 7613 has twin

Soft-Flo* patented ABS plastic anti-surge eyewash

heads in Safety Green (Model SP11). Dust covers

protect heads and automatically release with water

pressure.

Activation: Models 7612 and 7612LH feature a

stainless steel push flag which operates a stay open

polished chrome plated brass ball valve that is

equipped with a stainless steel ball and stem.

Model 7613 has chrome plated valve.

Sign: Universal emergency sign included.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Details

Supply: 1 ⁄2" O.D. slipjoint

Shipping Weights: 7 lbs.

*Patent No. 3,809,315

LABORATORY UNIT

Activation: Pull down arms operate a polished

chrome plated stay open ball valve.

Sign: Universal emergency sign included.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Cabinet: Model 7655WC has a fully recessed corrosion

resistant, 16 gauge, type 304, no. 4 finish

stainless steel cabinet that includes stop and union

connection.

Details

Supply: 7650, 7651 - 1 ⁄2" O.D. slipjoint.

7655WC - 1 ⁄2" IPS for bottom or back connection.

Shipping Weight: 7650 -7 lbs., 7651 -7 lbs.

7655WC -27 lbs.

*Patent No. 3,602,436

Details

Supply: 1 ⁄2" IPS for back or side connection.

Waste: 1 1 ⁄2" IPS for back or side connection.

*Patent No. 3,602,436

Options

(Additional Cost)

Model 9022: 3 sided

ABS plastic sign featuring

universal pictorial

of eyewash.

*Patent No. 3,602,436

7656WC closed


LABORATORY UNIT

■ 8163

Good for retro fit applications where wall

penetration is not practical

■ 8170

Good for retro fit applications where wall

penetration is not practical

Specifications

Head: Model 8163 is satin finished cast aluminum

featuring a flange for flush to ceiling mounting.

Spreader is stainless steel10" stainless steel head.

Model 8170 is satin finished cast aluminum featuring

a flange for flush to ceiling mounting. Spreader

is stainless steel

Activation: Model 8163 is rigid stainless steel pull

rod operates a stay open chrome plated brass ball

valve that is equipped with a stainless steel stem.

This extended rod is located parallel to the wall.

Piping: Model 8163 has a 6 1/2" long nipple and

1" elbow with escutcheon included. Model 8170

has a 4" long nipple and 1" elbow included.

Sign: Universal emergency sign included.

Details

Supply: 1" IPS

Options (Additional Cost)

Model 9021: 3 sided ABS plastic sign featuring

universal pictorial of shower.

Pull rod: Other lengths available on special

order.

■ 8164

Flush to ceiling for concealed mounting

with recessed pull down lever valve

■ 8165

Exposed stainless steel shower head with

recessed pull down lever valve

Specifications

Head: Model 8164 is satin finished cast aluminum

featuring a flange for flush to ceiling mounting.

Spreader is stainless steel.Model 8165 is a 10"

stainless steel head.

Activation: Heavy duty stainless steel activating

arm with PVC handle, operates a stay open chrome

plated brass ball valve that is equipped with a stainless

steel stem.

Piping: Model 8164 has a 4" long nipple and 1"

elbow included.. Model 8165 has a 6 1/2" long nipple

and 1" elbow with escutcheon included.

Sign: Universal emergency sign included.

Details

Supply: 1" IPS

Options (Additional Cost)

Model 9021: 3 sided ABS plastic sign featuring

universal pictorial of shower.

Drench Shower

8163

8164

8165

8170

Activating arm

8163

8170

8164

8165

23


8123

8169

H P C P

24

Drench Shower LABORATORY UNIT

8169

8123HPCP

■ 8123HPCP

Polished stainless head with polished

chrome plated valve and piping.

■ 8169

Flush to ceiling for concealed mounting

Specifications

Head: Model 8123HPCP has a high polished corrosion

resistant 10" stainless steel head (Model

8127HP). Model 8169 is satin finished cast aluminum

featuring a flange for flush to ceiling mounting.

Spreader is stainless steel.

Activation: Rigid stainless steel pull rod operates a

stay open chrome plated brass ball valve that is

equipped with a stainless steel stem. Supplied pull

rod is designed to operate shower when installed in

ceiling up to 8'. For other length pull rods, see

options below.

Piping: Model 8123HPCP has polished chrome

plated red brass

Sign: Universal emergency sign included.

Details

Supply: 1" IPS

Shipping Weight: 8123HPCP -13 lbs.,

8169 -11 lbs.

Options (Additional Cost)

Model 9020: 3 sided ABS plastic sign featuring

universal pictorial of shower and eyewash.

8169

Stainless steel pull rod for other than 8’ ceiling

installation:

Model SP204: 56" overall for 9' ceilings.

Model SP203: 68" overall for 10' ceilings.

Pull rod: Other lengths available on special

order.


LABORATORY UNIT

■ 8355WC

Recessed wall mounted - pull down. Pull

down laboratory drench shower and eyewash

in one recessed stainless steel housing.

Furnished with fully recessed stainless

steel cabinet and drainage pan designed for

Barrier Free access.

Specifications

Shower

Head: Satin finished cast aluminum featuring a

flange for flush to ceiling mounting. Spreader is

stainless steel.

Activation: Heavy duty stainless steel activating

arm with PVC handle, operates a stay open chrome

plated brass ball valve that is equipped with a stainless

steel stem.

Piping: 4" long nipple and 1" elbow included.

Sign: Universal emergency sign included.

Eyewash

Head: Polished chrome plated brass Soft-Flo*

anti-surge eyewash heads (Model SP10).

Activation: Pull down drainage pan operates a polished

chrome plated brass ball type valve. Supply

stop and trap are supplied.

Sign: Universal emergency sign included.

Stream Control: Steady water flow under varying

pressures assured with automatic pressure compensation

device.

Cabinet and Access Panel: Fully recessed corrosion

resistant, 16 gauge #4 satin finish stainless

steel, with Safety Green ABS tray and pull handle.

Details

Supply: 1" IPS, side inlet

Waste: 1 1 ⁄2" IPS, side outlet

Options (Additional Cost)

Model 9020: 3 sided ABS plastic sign featuring

universal pictorial of shower and eyewash.

*Patent No. 3,602,436

Pulldown Shower and Eyewash

8355WC eyewash

8355WC

Drainage pan closed

25


8605SS

S E R I E S

26

Stainless Steel Combination LABORATORY UNIT

■ 8605SS

For areas where material corrosion resistance

or cleanliness is a concern, and where

excess water on floor may damage surroundings.

Specifications

Booth: 16 gauge 304 stainless steel panels, with #4

finish, enclosed on three sides. Vertical header and

overhead pipe are stainless steel. Four stainless steel

anchoring brackets provided.

Grate: Floor grate is powder coated steel with corrosion

resistant substrate.

Shower

Head: 10" stainless steel head (Model 8127).

Activation: Rigid stainless steel pull rod operates a

stay open type 316 stainless steel ball valve.

Sign: Large graphics identify the booth as an emergency

shower/eyewash station and assist in guiding

user to the front.

Eye/Face Wash

Head: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Stainless steel push flag operates a stay

open type 316 stainless steel ball valve.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Details

Supply: 1" IPS

Waste: 3" inside caulk

Options (Additional Cost)

Model 9040: Shower curtain for privacy and

water containment.

Model 9001: Alarm system activated by shower

or eyewash to summon help.

*Patent No. 3,602,436


LABORATORY UNIT

■ RS 8901B

Wall mounted

■ 8903 RS

Deck mounted

■ 8904

Deck mounted with dual 45° angled dual

heads

Specifications

Heads: Feather-Flo* patented ABS plastic eye/face

wash head in Safety Green with integral flip top dust

cover that protects head and automatically release

with water pressure (Model SP21). Model 8904 is

equipped with dual heads angled at 45° to thoroughly

flush both eyes at once.

LABORATORY UNIT

■ 8905

Wall mounted with dual 45° angled heads

and recoil hose

■ 8908

Wall mounted with single 45° angled head

and recoil hose

Easy to locate and operate wall mounted emergency,

face and body spray models with recoil hose allow

user the ability to wash all parts of the face and body.

8908

8904

Activation: Squeeze handle operates stay open

chrome plated brass valve.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Flow Control: Steady water flow under varying

pressures.

Hose: 25/32" O.D. 8' 250 PSI pressure rated.

Chrome plated swivel fitting at one end to facilitate

ease of operation.

Mounting: Model 8901B supplied with high impact

ABS plastic wall bracket. Mounting screws not furnished.

Model 8903 and 8904 are supplied with an

impact and corrosion resistant Norylplastic deck

flange that incorporates guiding key slots for proper

positioning of spray heads. Flange is secured to

deck with locknut.

Details

Supply: 1 ⁄2" IPS

Shipping Weight: 8901B -5 lbs., 8903 -6 lbs.,

8904 -7 lbs.

Options (Additional Cost)

Model SP212: Vacuum Breaker

Flexible Stainless Steel Hose: Metal

jacketed hose for abrasion resistance and extra

long protection from UV rays.

*Patent No. 3,602,436

Note: Per ANSI, “Hand-held drench hoses provide support

for emergency shower and eyewash units but shall not

replace them.”

Specifications

Heads: Model 8905 has dual 45° angled Feather-

Flo* patented ABS plastic eye/face wash heads in

Safety Green with integral flip top dust covers that

protect heads and automatically release with water

pressure (Model SP21). Model 8908 has a single

45° angled head (Model SP21).

Activation: Squeeze handle operates stay open

chrome plated brass valve.

Recoil Hose: 12' yellow recoil hose supplied with

elbow and wall escutcheon, returns to a compact coil

after use for convenient storage and to resist tangling.

Flow Control: Steady water flow under varying

pressures.

Sign: Universal emergency sign included.

Mounting: Model 8905 features “U” shaped

chrome plated steel bracket with two grabber clips.

Model 8908 features high strength ABS plastic

bracket with single grabber clip. Screws not

furnished.

Details

Supply: 1 ⁄2" IPS

Shipping Weight: 8905 -6 lbs., 8908 -7 lbs.

Options

Model SP212: Vacuum breaker

*Patent No. 3,602,436

Note: Per ANSI, “Hand-held drench hoses provide support

for emergency shower and eyewash units but shall not

replace them.”

Eye/Face and Body Spray

8903

Recoil Hose and Spray

8901B

8905

8900

S E R I E S

8900

S E R I E S

27


7360

B T W C

28

Stainless Steel Bowl

■ 7360BTWC

Wall mounted with trap

Features a custom redesigned bowl holder and wall

mounting bracket for Barrier Free access.

Specifications

Receptor: 11" stainless steel with #7 bright finish on

exterior.

Head: Twin Feather-Flo* patented ABS plastic eye/face

wash heads in Safety Green with integral flip top dust

covers that protect heads and automatically release with

water pressure (Model SP21).

Activation: Stainless steel push flag operates a stay open

chrome plated brass ball valve that is equipped with a

stainless steel ball and stem.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety equipment.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Strainer: Fully serviceable in-line, 50x50 mesh strainer

filters debris from reaching the eyewash.

Mounting: Stainless steel wall bracket.

Trap: 11⁄2" IPS satin chrome plated trap, with provisions

for three optional mounting installations.

BARRIER FREE

Details

Supply: 1 ⁄2"IPS

Waste: 11 ⁄2"IPS

Options (Additional Cost)

Model SP220W: Wall mounted foot control

assembly allows user to activate without hands.

(Not Barrier Free)

Model 9101: ABS dust cover assembly protects

unit from dust and other environmental

contamination. Pressure on flag raises cover

and activates eyewash.

Model 9102: Stainless steel dust cover assembly

protects unit from dust and other environmental

contamination. Pressure on flag raises cover and

activates eyewash.

Model TWBS.EW: Tempered water blending

system specially designed for eyewash units.

*Patent No. 3,602,436


■ 7000BTWC

Receptor: Safety Green ABS plastic with UV

inhibitors and corrosion resistant.

Head: Patented Omni-Flo*, wrap-around spray

head provides superior spray pattern that gently covers

entire facial area. Includes hinged dust cover of

durable ABS plastic.

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Sign: Universal emergency sign included.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Stream Control: Steady water flow under varying

pressures assured with automatic pressure compensation

devices for 30-90 PSI. The single wide orifice

flow control can be serviced if clogging occurs or

exchanged if high or low water pressure is present.

Strainer: In-line, 50x50 mesh.

Filter System: Foam filters are easy to remove for

cleaning and maintenance.

Mounting: Integral stainless steel wall bracket.

Trap: 1 1 ⁄2" IPS satin chrome plated trap.

Supply: 1 ⁄2" IPS

Waste: 1 1 ⁄2" IPS

Shipping Weight: 12 lbs.

NOTE: For installation options see

7360BTWC drawings on page 28.

*Patent No. 5,008,963

■ 7655WC

BARRIER FREE

Heads: Twin Feather-Flo** patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers (Model SP21).

Activation: Pull down arms operate a polished

chrome plated stay open ball valve.

Sign: Universal emergency sign included.

BARRIER FREE

■ 8122HWC

Barrier Free shower with ABS shower head -

horizontal supply. Pull rod is set back close to wall

with low torque ball valve activation that exceeds

ADA requirements.

Specifications

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Extended rigid stainless steel pull rod

operates a stay open chrome plated brass ball valve

that is equipped with a stainless steel stem.

Piping: Extended 1" hot dip galvanized steel pipe.

Sign: Universal emergency sign included.

Details

Supply: 1" IPS

Shipping Weight: 12 lbs.

■ 8200WC*

Specifications

Shower

Head:10" ABS plastic in Safety Green (Model

8129).

Activation: Extended rigid stainless steel pull rod is

designed to be within reach of the wheelchair user.

Pull rod operates a stay open chrome plated brass

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Cabinet: Fully recessed corrosion resistant, 16

gauge, type 304, no. 4 finish stainless steel.

Supply: 1 ⁄2" IPS for bottom or back connection. Stop

and union connection included.

Shipping Weight: 27 lbs.

**Patent No. 3,602,436

■ 7656WC

Recessed wall mounted - pull down

Polished chrome plated pull down laboratory eyewash

with polished chrome plated heads. Furnished

with fully recessed stainless steel cabinet and

drainage pan designed for Barrier Free access.

Specifications

Heads: Polished chrome plated brass Soft-Flo*

anti-surge eyewash heads (Model SP10)..

Activation: Pull down drainage pan operates a polished

chrome plated brass ball type valve. Supply

stop and integral trap are supplied.

Sign: Universal emergency sign included.

Stream Control: Steady water flow under varying

pressures assured with automatic pressure compensation

device.

Cabinet: Fully recessed corrosion resistant, 16

gauge stainless steel mounting can with ABS tray

and pull handle.

Details

Supply: 1 ⁄2" IPS for back or side connection.

Waste: 1 1 ⁄2" IPS for back or side connection.

*Patent No. 3,602,436

Options (Additional Cost)

Model 9022: 3 sided ABS plastic sign featuring

universal pictorial of eyewash.

*Patent No. 3,602,436

ball valve that is equipped with a stainless steel

stem.

Flow Control: 30.0 GPM chrome plated brass

assembly (Model SP38).

Standard: 9" diameter floor flange and 1 1 ⁄4" hot dip

galvanized steel pipe with two 21" long self adhesive

high visibility stripes in Safety Green and bright

yellow to improve visibility.

Eye/Face Wash

Receptor: Safety Green ABS plastic resistant to

damage from alkalies, salt solutions, oils, most

acids. Receptor extends 19" from stanchion and the

eye/face wash is located 36” high.

Heads: Patented Omni-Flo, wrap-around spray

head provides superior spray pattern that gently covers

entire facial area. Includes permanent, one-piece,

hinged dust cover of bright yellow durable ABS plastic.

Positive link actuation assures instant opening,

while providing positive cover retention.

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and safety

equipment.

Stream Control: Steady water flow under varying

Eye/Face Wash

■ 7752WC

Drench Shower

Barrier Free eye/face wash with stainless

steel receptor

Specifications

Receptor: Stainless steel bowl with wraparound

skirt to conceal plumbing. Extends

19” from wall to comply with current

Barrier-Free standards.

Heads: Twin Feather-Flo* patented

ABS plastic eye/face wash heads in

Safety Green with integral flip top dust

covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Stainless steel push flag operates

a stay open chrome plated brass ball

valve that is equipped with a stainless steel

ball and stem.

Sign: Universal emergency sign included.

Stream Control: Steady water flow under

varying pressures assured with

dual automatic pressure compensation

devices.

Details

Supply: 1 ⁄2" IPS

Waste: 11 ⁄2" IPS

Shipping Weight: 17 lbs.

*Patent No. 3,602,436

sation devices for

30-90 PSI. The single

wide orifice flow

control can be serviced

if clogging

occurs or

exchanged if high or

low water pressure

is present.

Strainer: Fully serviceable

in-line,

50x50 mesh strainer

filters debris from

reaching the eyewash.

7655WC

Details

Supply: 11 ⁄4" IPS

Waste: 11 8200WC

Extended pull rod

⁄4" IPS

Shipping Weight: 53 lbs.

Options (Additional Cost)

Model 8127: Stainless steel shower

head.

*Patent No. 5,008,963

7000BTWC●7655WC

7656WC●7752WC

7000BTWC

7752WC

7656WC

OmniFlo Combination Unit

8122HWC

8200WC

8122HWC

pressures assured with automatic pressure compen- 29


8309WC

30

Shower and Eye/Face Wash BARRIER FREE

■ 8309WC

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model

8129). Extra long extension places shower head over

wheelchair users.

Activation: Extended rigid stainless steel pull rod is

designed to be within reach of the wheelchair user.

Pull rod operates a stay open chrome plated brass

ball valve that is equipped with a stainless steel

stem.

Flow Control: 20.0 GPM chrome plated brass

assembly (Model SP38).

Sign: Universal emergency sign included.

Standard: 9" diameter floor flange and 11 ⁄4" hot dip

galvanized steel pipe with two 21" long self adhesive

high visibility stripes in Safety Green and bright

yellow to improve visibility.

Eye/Face Wash

Receptor: 11" stainless steel with #7 bright finish

on exterior. Receptor extends 18 5 ⁄8" from stanchion

and 36" high.

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Activation: Stainless steel push flag operates a stay

open chrome plated brass ball valve that is equipped

with a stainless steel ball and stem.

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

Strainer: Fully serviceable in-line, 50x50 mesh

strainer filters debris from reaching the eyewash.

Details

Supply: 1 1 ⁄4" IPS

Waste: 1 1 ⁄4" IPS

Shipping Weight: 50 lbs.

Options (Additional Cost)

Model 8127: Stainless steel shower head.

CRP Green Coating: Additional protection

against corrosive atmospheres.

Model 9101: ABS dust cover assembly

protects unit from dust and other environmental

contamination. Pressure on flag raises cover and

activates eyewash.

Model 9102: ABS dust cover assembly

protects unit from dust and other environmental

contamination. Pressure on flag raises cover

and activates eyewash.

*Patent No. 3,602,436


■ 8327WC

Specifications

Shower

Head: 10" ABS plastic in Safety Green (Model 8129).

Activation: Weight on 29"x32" hot dip galvanized

carbon steel diamond plate treadle opens chrome

plated brass self closing globe valve which simultaneously

activates both shower and eye/face wash.

Flow Control: 20.0 GPM chrome plated brass

assembly (Model SP38).

Standard: 9" diameter floor flange and 11 ⁄4" hot dip

galvanized steel pipe with two 21" long self adhesive

high visibility stripes in Safety Green and bright yellow

to improve visibility.

Eye/Face Wash

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

top dust covers that protect heads and automatically

release with water pressure (Model SP21).

Stream Control: Steady water flow under varying

pressures assured with dual automatic pressure

compensation devices.

■ 8355WC

Recessed wall mounted - pull down. Pull

down laboratory drench shower and eyewash

in one recessed stainless steel housing.

Furnished with fully recessed stainless

steel cabinet and drainage pan designed for

Barrier Free access.

Specifications

Shower

Head: Satin finished cast aluminum featuring a

flange for flush to ceiling mounting. Spreader is

stainless steel.

Activation: Heavy duty stainless steel activating

arm with PVC handle, operates a stay open chrome

plated brass ball valve that is equipped with a stainless

steel stem.

Piping: 4" long nipple and 1" elbow included.

Sign: Universal emergency sign included.

Eyewash

Head: Polished chrome plated brass Soft-Flo*

anti-surge eyewash heads (Model SP10).

■ 8600WC

BARRIER FREE

Complete decontamination booths for areas where

excess water on floor may damage surroundings.

Can be installed flush to floor for Barrier Free access.

Specifications

Booth: Reinforced molded fiberglass, enclosed on

three sides, alkali and acid resistant, bright white finish.

Molded anchoring pads provided. Vertical header

and overhead are hot dip galvanized pipe.

Horizontal leads to nozzle are PVC.

Shower Nozzles: 7 chrome plated brass, direction

pre-set, full cone nozzles located over head and on

the sides of the shower booth.

Activation: Weight on treadle opens chrome plated

brass self closing globe valve which simultaneously

activates all shower nozzles and eye/face wash.

Sign: Large graphics identify the booth as an emergency

shower/eyewash station and assist in guiding

user to the front.

Eye/Face Wash

Heads: Twin Feather-Flo* patented ABS plastic

eye/face wash heads in Safety Green with integral flip

Details

Supply: 1 1 ⁄4" IPS

Shipping Weight: 78 lbs.

Options (Additional Cost)

Model 8127: Stainless steel

shower head.

CRP Green Coating: Additional

protection against corrosive atmospheres.

Model TWBS.SH: Tempered water

blending system designed for

showers and eyewashes.

Model 9001: Alarm system activated

by shower or eyewash to summon help.

Model 9020: 3 sided ABS

plastic sign featuring universal

pictorial of shower and eyewash.

*Patent No. 3,602,436

Activation: Pull down drainage pan operates a polished

chrome plated brass ball type valve. Supply

stop and trap are supplied.

Sign: Universal emergency sign included.

Stream Control: Steady water flow under varying

pressures assured with automatic pressure compensation

device.

Cabinet and Access Panel: Fully recessed corrosion

resistant, 16 gauge #4 satin finish stainless

steel, with Safety Green ABS tray and pull handle.

Details

Supply: 1" IPS, side inlet

Waste: 1 1 ⁄2" IPS, side outlet

Options (Additional Cost)

Model 9020: 3 sided ABS plastic sign featuring

universal pictorial of shower and eyewash.

*Patent No. 3,602,436

top dust covers that protect heads

and automatically release with water

pressure (Model SP21).

Stream Control: Steady water

flow under varying pressures

assured with dual automatic pressure

compensation devices.

Details

Supply: 1" IPS

Waste: 3” inside caulk

Shipping Weight: 400 lbs.

Options (Additional Cost)

Model 9040: Shower curtain

for privacy and water

containment.

Model 9001: Alarm system

activated by shower or

eyewash to summon help.

*Patent No. 3,602,436

Shower and Eye/Face Wash

8600WC

Barrier free accessibility

8327WC

8355WC eyewash

Shower

and Eye/Face

Wash

Drainage pan closed

8327WC

8355WC

8600WC

Shower

and Eye/Face

Wash

31


8710

8730

32

8730

8760

8780

8710

8760

■ 8710

Decontamination booth with an

internal hot water supply and tempering

system. Incudes a shower,

eye/face wash and drench hose

assembly in a heated enclosure

■ 8730

Decontamination booth includes a

shower, eye/face wash and drench

hose assembly in a heated enclosure

Specifications

Standard Insulated Enclosures:

Insulated with 1 1 ⁄2" thick urethane

foam. Protected with UV inhibitors,

the exterior resin skin is bright yellow

with Safety Green graphics.

Large graphics identify the building

as an emergency shower/eyewash station and assist in

guiding the user to the double swing doors. The interior

space is heated and illuminated to provide for safe user

comfort. The shower area of Model 8710 is a spacious

5’x4’ and a large access panel is provided to facilitate

equipment access and maintenance. Exterior and interior

FRP skins with 1 1 ⁄2" flame retardant insulation: Total R

value =11.

8710 Series Polar Booths 5'x 9'x 8'6"

8730 Series Polar Booths 4' x 4' x 8'6"

Multiple Drench Systems: Includes a Haws shower,

eye/face wash and drench hose protected with Haws

freeze and scald valves. All stay-open valves are chrome

plated brass.

Alarm System: Standard alarm system is flow switch

■ 8760

Skid-mounted decontamination station with an integral

hot water supply and tempering system. Includes a

shower, eye/face wash and drench hose assembly.

■ 8780

Skid-mounted tempering system with heater and mixing

valve

Standard Specifications

Water Heater: 4.0kW, 240 VAC copper immersion

heater or steam.

Blending System: Haws Model TWBS.SH

Piping: Schedule 40 galvanized piping with brass and

stainless steel valves.

Thermostat: Dual element thermostat with manual reset

hi-limit protection.

Skid: 8760 Series 4' x 8' galvanized steel. 8780

Series

4' x 5' galvanized steel.

Drenching/Alarm Specifications -8760 Series

only

Multiple Drench Systems: Model 8760 includes a

Haws shower, eye/face wash and drench hose protected

with a Haws scald valve. All stay-open valves are

chrome plated brass with stainless steel stems.

Alarm System: Standard alarm system is flow switch

activated and provides local audible and visible alarms

with dry hermetic relay contacts for remote alarm

hookup. System includes silencing circuit with

auto reset. Area light flashes and alarm

sounds upon activation.

Heavy Duty Skid: Each system is

supported on a heavy duty galvanized

Booths POLAR

activated and provides local audible and visible alarms

with dry hermetic relay contacts for remote alarm hookup.

System includes silencing circuit with auto reset. Area

light flashes and alarm sounds upon activation.

Windows: Clear 8" x 12" plexiglass with rubber trim.

Lights: 100 watt, interior clear and exterior green.

(Normally on).

Space Heater: Natural convection 2.7kW, for hazardous

classification; forced air 3kW for Nema 4.

Piping: Schedule 40 galvanized piping with brass and

stainless steel valves.

Thermostat: Dual element thermostat with manual reset

hi-limit protection.

Flow Switch: 5 AMP SPDT, alarm activation at 2.2

GPM.

Freeze/Scald Valves: Haws Models SP157A and

SP158A.

Shower Head: ABS plastic head (Model 8129).

Eye/Face Wash: 6 GPM Feather-Flo* ABS plastic

heads.

Drench Hose: 4 GPM hose with flag and ball valve.

8710

Water Heater: 4.0kW, 240 VAC copper immersion

heater or steam.

Blending System: Haws Model TWBS.SH

Tempering System Options - 8710 Series only

Tank Systems

119 Gallon Tank (Option No. 21): Stores

enough hot water to provide a single 15 minute, 20

GPM shower. Recovery time of up to 6 hours.

119 Gallon ASME Tank (Option No. 22): Stores

enough hot water to provide a single 15 minute, 20

GPM shower. Recovery time of up to 6 hours.

frame with open steel grating and forklift slots. The base

assembly is also supplied with a protective barrier wall

and modesty curtain to help promote safety and full

decontamination (i.e., the removal of contaminated clothing).

Light: 100 watt, green. (Normally on).

Flow Switch: 5 AMP SPDT, alarm activation at 2.2

GPM.

Scald Valve: Haws Model SP157A.

Shower Head: ABS plastic head, with flow control

(Model 8129).

Eye/Face Wash: 6 GPM feather flow ABS plastic heads

(Model SP21).

Drench Hose: 4 GPM hose with flag and ball valve.

Tempering System Options

Tank Systems

119 Gallon Tank (Option No. 21): Stores

enough hot water to provide a single 15 minute, 20

GPM shower. Recovery time of up to 6 hours.

119 Gallon ASME Tank (Option No. 22): Stores

enough hot water to provide a single 15 minute, 20

GPM shower. Recovery time of up to 6 hours.

325 Gallon ASME Tank (Option No. 23): Stores

enough hot water to provide two 15 minute, 30 GPM

showers before tank recovery is required. Recovery

time of up to 18 hours.

Steam Systems

When a steam supply is available, a Haws steam heat

exchanger and mixing system can be the best approach

325 Gallon ASME Tank (Option No. 23):

Stores enough hot water to provide two 15 minute, 30

GPM showers before tank recovery is

required. Recovery time of up to 18

hours.

Steam Systems

When a steam supply is available, a Haws steam heat

exchanger and mixing system can be the best approach

for efficient tempering, especially with multiple shower or

recirculating systems. Our standard system is sized to

provide up to 30 GPM of 80°F (26°C) tempered water.

Higher flow systems are available upon request. Haws’

steam system requires no recovery time.

Steam Heater (Option No. 24): Feed forward

instantaneous heater. Requires 15 PSIG, 1300 lb/hr

steam supply.

Electrical System Options

Choose from any of the following classifications. Our

standard system requires 120VAC and 240VAC single

phase, 3 wire 40 amps (min), electrical supply.

NEMA 4 (8710 tank - option 31, 8710 steam -

option 36, 8730 - option 31)

NEMA 7 CLASS I, DIV2, GR. B, C, D (8710 tank

- option 32, 8710 steam - option 37, 8730 -

option 32)

NEMA 7 CLASS I, DIV1, GR. C, D (8710 tank -

option 33, 8710 steam - option 38, 8730 - option 33)

*Patent No. 3,602,436

for efficient tempering, especially with multiple shower or

recirculating systems. Our standard system is sized to

provide up to 30 GPM of 80°F tempered water. Higher

flow systems are available upon request. Haws’ steam

system requires no recovery time.

Steam Heater (Option No. 24): Feed forward

instantaneous heater. Requires 15 PSIG, 1300 lb/hr

steam supply.

Electrical System Options

Choose from any of the following classifications. Our

standard system requires 120VAC and 240VAC single

phase, 3 wire 40 amps (min), electrical supply.

NEMA 4 (tank - option 31, steam - option 36)

NEMA 7 CLASS I, DIV2, GR. B, C, D

(tank - option 32, steam - option 37)

NEMA 7 CLASS I, DIV1, GR. C, D

(tank - option 33, steam - option 38)

8780


■ TWBS.SH

A safe, prepackaged, fully engineered and tested system

for mixing large volumes of hot and cold water

to provide tempered water for emergency showers

and eyewashes. Ideal for areas where supply water

temperatures fall below 60°F(15°C). Unit contains

no electrical components, thus suitable for combustible

atmospheres.

Specifications

Fail Safe Back Up: System provides multiple levels

of protection to prevent scalding, including a

high temperature limit valve set at 85°F(29°C). Also

included is a pressure relief cold water bypass that

protects against constricted flow.

Tempered Water: Engineered to provide warm

water, 60°F - 85°F(15°C - 29°C) (factory set at

80°F(26°C)) over a wide range of flows, 3-35 GPM.

System is designed to mix cold and hot water supplies

for a single combination shower and eyewash

or several eyewashes.

Temperature Gauge: System includes outlet temperature

gauge.

Details

Supply: 1 1 ⁄4" IPS. Dielectric inlet and outlet unions

provided. System requires 40 GPM combined flow

rate at 35 psi dynamic pressure supplied.

Shipping Weight: 121 lbs.

■ TWBS.EW

■ TWBS.EWH

POLAR

A safe, prepackaged, fully engineered and tested system

for producing small volumes of tempered water

for emergency eyewashes. TWBS.EW mixes supplies

of hot and cold water, while TWBS.EWH is ideal

where hot water is not present. Used for areas where

supply water temperatures fall below 60°F(15°C).

Specifications

Fail Safe Back Up: System provides multiple levels

of protection to prevent scalding including a high

temperature limit valve set at 95°F(35°C). Also

included is a pressure relief cold water bypass that

protects against constricted flow.

TWBS.EW

Operation: Engineered to provide warm water,

60°F- 85°F(15°C - 29°C), factory set at 80°F(26°C)

for flows up to 5 GPM. System is designed to mix

cold and hot water supplies for an eye and eye/face

wash.

Temperature Gauge: System includes outlet temperature

gauge.

Supply: 1 ⁄2" IPS. System requires 5 GPM flow rate at

50 psi dynamic pressure supplied for facewash

applications.

Shipping Weight: 18 lbs.

For additional tempered water units see Models 9201 and 9202 shown on page 38.

Options (Additional Cost)

Remote Relay Contacts: With outputs for

control room instrument panel status.

Higher Capacity Flows: For up to 60 GPM

flow requirements. (Cabinet not available)

TWBS.CAB Enclosure: Protective, corrosion

resistant fiberglass cabinet with security latch,

19 1 ⁄2"H x 16”W x 10 1 ⁄4"D. Shipping weight of

20 lbs.

TWBS.EWH

TWBS.EWH

Operation: Engineered to provide warm water

instantaneously up to 80°F(26°C) for flows up to

2.5 GPM. System is designed to heat cold water

supply up to 45°F(25°C)∆T on demand for an

eyewash only.

Temperature Gauge: System includes outlet

temperature gauge.

Supply: 1 ⁄2" IPS. System requires 480V 18KW,

3 phase electrical supply. Other voltages available as

special orders.

Shipping Weight: 43 lbs.

Options (Additional Cost)

TWBS.EW

TWBS.CAB Enclosure: A protective, corrosion

resistant fiberglass cabinet with security latch,

19 1 ⁄2"H x 16”W x 10 1 ⁄4"D. Shipping weight of

20 lbs.

Tempered Water Blending System

TWBS.SH

With optional cabinet

TWBS

S E R I E S

TWBS.SH

TWBS.EW

Installed in optional cabinet

33


8127 ●8127HP

8129 ●8901 ●9001

KITS

9001

Deluge

Shower Heads

E X P

34

8127

8901RFK

Shown on 8300

Hose and

Spray Kits

Emergency Alarm

System

Explosion Proof

Alarm System

9001EXP

9001

3-Sided Sign ACCESSORIES

RS

■ Model 8127

Shower Head: Corrosion resistant #4 satin finish,

stainless steel 10” shower head with perforated

stainless steel spreader.

Supply: 1" IPS.

Shipping Weight: 4 lbs.

■ Model 8127HP

Shower Head: Corrosion resistant, high polished,

stainless steel 10" shower head with perforated

stainless steel spreader.

Supply: 1" IPS.

Shipping Weight: 4 lbs.

■ Model 8901RFK

Unit includes clamp hook-up, tee clip and fittings for

“retrofit” installation on any emergency shower or

eyewash combination unit.

■ Model 8901.6

■ Model 9001

RS

Includes hose and spray for model 7602.10 portable.

Specifications

Head: Feather-Flo* patented ABS plastic anti-surge

eyewash head in Safety Green with integral flip top

dust cover that protects head and automatically

releases with water pressure (Model SP21).

Hose: On Model 8901RFK 25/32" O.D. 8 foot 250

PSI pressure rated. Chrome plated swivel fitting at

one end to facilitate ease of operation. On Model

8901.6, hose is 6 foot.

Color: Safety Green, per ANSI Z535.1-1991 designating

safety and location of first aid and emergency

equipment.

Alarm and light are activated by flow switch when

emergency shower or eyewash is in operation to

summon help. Recommended for use in noisy or

remote locations. Designed for indoor or outdoor

installation.

Specifications

Light: Amber flashing, UL Listed and CSA

approved.

Audible Alarm: Intermittent signal rated at 90 Db

at 10 feet.

Alarm Voltage: AC, 120 volts, 50 or 60 cycle, single

phase.

Flow Switch: AC, 125/250V, 5 amps, single pole,

double throw, UL Listed and CSA approved.

■ Model 9001EXP

All explosion proof alarm system. Alarm and light

are activated by flow switch when emergency shower

or eyewash is in operation to summon help.

Recommended for use in noisy or remote locations.

Specifications

Light: Red flashing vapor tight light, ignition temperature

rating T3.

Audible Alarm: Intermittent signal rated 90 Db at

10 feet.

Alarm Voltage: AC, 120 volts, 50 or 60 cycle, single

phase.

RS

■ Model 8129

Shower Head: Molded ABS plastic 10" shower

head with perforated spreader in Safety Green.

Corrosion-resistant against alkalies, oils and most

acids.

Color: Safety Green, per ANSI Z535.1-1991

designating safety and location of first aid and safety

equipment.

Supply: 1" IPS.

Shipping Weight: 3 lbs.

8129

Activation: Squeeze handle operates stay open

chrome plated brass valve.

Flow Control: Steady water flow under varying

pressures.

Details

Supply: 1 ⁄2" IPS.

Shipping Weight: 8901RFK -8 lbs.,

8901.6 -4 lbs.

Options (Additional Cost)

Flexible Stainless Steel Hose: Metal

jacketed hose for abrasion resistance and extra

long protection from UV rays.

Model SP212: Vacuum Breaker

*Patent No. 3,602,436

Note: Per ANSI, “Hand-held drench hoses provide support

for emergency shower and eyewash units but shall not

replace them.”

Watertight. Must be located on the water supply line

in horizontal position at least 6” from any bend or tee

(Model SP154).

Remote Alarm Contacts: Normally closed contact

provided as standard.

Mounting: Can be mounted to pipe or to wall with

optional wall bracket provided.

Details

Supply: 1 1 ⁄4" IPS

Shipping Weight: 15 lbs.

Options (Additional Cost)

SP154DPDT: Flow switch with DPDT (double

pole double throw) contacts for wiring to remote

location.

Flow Switch: AC, 125/250V, 5 amps, single pole,

double throw, UL Listed, CSA approved and watertight.

Must be located on the water supply line in

horizontal position at least 6” from any bend or tee.

Remote Alarm Contacts: Normally closed contact

provided as standard.

Electrical: Class I, Division 2, Group B,C and D.

UL listed components.

Details

Supply: 1 1 ⁄4" IPS

Shipping Weight: 29 lbs.

Options (Additional Cost)

Class I, Div. I Group C,D Rating


ACCESSORIES

■ Model 9007 Cart

Can be used with any of the 10, 13, or 15 gallon

portables, Models 7601.10.2, 7602.10 and

7602.10TW for long distance mobility. Powder coated

and constructed of heavy duty 1” tubular frame.

Velcro strap included.

Shipping Weight: 23 lbs.

■ Model 9008 Cart

Holds Model 7601.37 portable eyewash and 7500

gravity fed eyewash. Also can be used with Model

9009 waste water container and Model 9010 shower

test kit. Features a stable assembly mobile enough

for short range positioning or transferring equipment

over long distances. Powder coated and constructed

of heavy duty 1” square steel tubing. Velcro strap

included.

Shipping Weight: 78 lbs.

■ Model 9009

Waste Water Container

Adapts to Model 9008 to be used with Models 7500

or 9010. Twenty gallon yellow container constructed

of tough polymer resin.

Shipping Weight: 6 lbs.

■ Model 9010 Shower Test Kit

Affords periodic shower testing with ease. Kit

includes upper corrosion resistant ring to encircle

the shower head and tunnel shaped yellow Tyvek

waterproof tube to guide the water column to Model

9009 waste water container, or a drain. Holding rod

can be used as a handle for ease of testing by user.

Testing record card included.

Shipping Weight: 5 lbs.

■ Model 9015 Eyewash Gauge

Allows easy testing of eyewashes per ANSI Standard

Z358.1. Directions in black on clear Acrylic. Also

serves as 6 in.(15mm) ruler. Packaged in quantity of 6.

Shipping Weight: 1 lb.

■ Model 9018 Video

Haws Emergency Equipment sponsors an

Emergency Equipment training video that educates

users on OSHA requirements and the ANSI

Standard. An important item to include in any

company’s safety program.

Shipping Weight: 1 lb.

9010

9018

Test Kit

9007

Eyewash Gauge

9008 and 9009

9015

9007●9008 ●9009

9010 ●9015

9018

35


9020

S E R I E S

9037

9040

36

9022

Eyewash

9037

Installed on 8346

9021

Drench shower

3 Sided Sign

9020

Combination shower and eyewash

9020

Installed on 8300

ACCESSORIES

Privacy Curtains ACCESSORIES

9040

Installed on 8605

■ Model 9020

3 Sided Sign

For use on Haws combination shower and eyewash

units. This large yellow ABS plastic sign with Safety

Green printed stripes is visible from multiple directions.

Features universal pictorial of an emergency

shower and eyewash. Can be mounted on wall for 2

way visibility or on shower upright for 3 sided

visibility.

Shipping Weight: 4 lbs.

■ Model 9021

3 Sided Sign

Similar to Model 9020 except for use on Haws

emergency drench shower units only. Features

universal pictorial of an emergency shower.

Shipping Weight: 4 lbs.

■ Model 9022

3 Sided Sign

Similar to Model 9020 except for use on Haws emergency

eyewash stations only. Features universal pictorial

of an emergency eyewash. Mounted on wall for

2 way visibility.

Shipping Weight: 4 lbs.

■ Model 9037

Privacy Curtain

Protect your personnel by providing shower privacy

for removal of contaminated clothing with our easyto-install

modesty curtain. Designed to be used on

horizontal emergency drench shower or combination

emergency drench shower and eyewash units. This

curtain can be installed on new or previously

installed models. With a quick sweep of the hand on

both sides, the curtain wraps around to enclose the

shower and user. Durability is provided by the corrosion

resistant curtain rod. Partial water containment

is provided by the curtain which helps minimize the

danger of equipment damage.

Privacy Gown: Included in pocket of curtain.

Curtain Material: Tyvek yellow

Curtain Length: 78”

Diameter of Curtain Rod: 47 1 ⁄2"

Shipping Weight: 23 lbs.

■ Model 9040

Privacy Curtain

Designed for use with Models 8600WC and 8605,

this shower curtain performs water containment and

provides privacy to the employee who must disrobe

in an emergency. Snap hooks and shower rod

included.

Curtain Material: Tyvek white

Shipping Weight: 4 lbs.


ACCESSORIES

■ Model 9070

Filter

Recommended for installation on all eyewash units

for additional protection for eyes. Made of FDAapproved

polypropylene with disposable FDA

approved viscose fibre filter media which removes

particles down to 20 microns.

Flow Capacity: 7 GPM

Max. Working Pressure:125 PSI at 125°F.

Size: 15" overall by 5" diameter.

Supply: 3 ⁄4 "IPS inlet and outlet.

Shipping Weight: 5 lbs.

■ Model 9070C

Replacement Cartridge

For Model 9070

Shipping Weight: 1 lbs.

■ Model 9081 RS

Hydrosep Bacteriostatic Additive

For use in portable eyewash stations. Carton contains

four 8 oz. (236.8 ml.) plastic bottles.

Application: Portable eyewash solution preservative

for use only with clean potable water. When used

as directed, one 8 oz. bottle will preserve 5 to 20 gal-

9095

Installed on 7260BT

ACCESSORIES Eyewash Dust Cover Assembly

RS

■ Model 9101

Dust Cover Assembly

Corrosion and impact resistant ABS plastic cover in

Safety Green for use on most eye, eye/face wash and

combination models that use a stainless steel type

receptor and push flag activation. Protects the eyewash

orifices as well as the bowl. Pushing the flag

valve raises the dust cover and activates the eyewash.

When closed, it protects the eyewash bowl area

against heavy dust particles, metal fillings or other airborne

particulates. Assembly is adaptable to most

existing models and all new units which operate a

push flag activated valve.

Shipping Weight: 2 lbs.

■ Model 9102

Dust Cover Assembly

22 gauge stainless steel for use on most eye, eye/face

wash and combination models that use a stainless

steel type receptor and push flag activation. Protects

the eyewash orifices as well as the bowl. Pushing the

flag raises the dust cover and activates the eyewash.

When closed, it protects the eyewash bowl area

against heavy dust particles, metal fillings or other airborne

particulates. The flared rim helps to hold the

cover in position. Assembly is adaptable to 11" diameter

bowls with horizontal push flag assemblies.

lons of potable water for up to six months. Directions

on bottle.

Shipping Weight: 3 lbs.

For a material safety data sheet on Model 9081 call

the Haws toll free INFO FAX system and request

document #39081.

■ Model 9090

Dust Cover

For use on the Omni-Flo* series eyewashes and

combination units. One piece, hinged dust cover of

bright yellow durable ABS plastic.

Shipping Weight: 2 lbs.

■ Model 9094

Dust Cover

Use on all Haws portable eyewash units that feature

the SP12 Soft Flo** heads. Keeps eyewash heads

from contamination when not in use. Has Safety

Green polyethylene plastic cover with integral retainer

strap which automatically removes when water is

turned on. Sold in pairs.

Shipping Weight: 1 lb.

■ Model 9095 RS

Dust Cover

Similar to Model 9094 except used on all Haws eyewash

units featuring the SP10, SP11 or SP18 Soft

Flo** heads. Sold in pairs.

Shipping Weight: 1 lb.

■ Model 9098 RS

Dust Cover

For use on all SP21 Feather-Flo*** heads without

integral flip top dust cover. Cover automatically

removes when water is turned on. Sold in pairs.

(Note: for replacement of heads see current Model

SP21’s with integral flip top dust covers).

Shipping Weight: 1 lb.

*Patent No. 5,008,963 , **Patent No. 3,809,315

***Patent No. 3,602,436

Bacteriostatic Additive

Filter Dust Covers

9101

Shown on 7460B

9070

9081

9090

9102

9094

9070 ●9070C

9081 ●9090

9098

SERIES

9101

9102

37


9201

9202

38

Thermostatic Mixing Valve

9201 chart

Omni-Flo

9202 chart

ACCESSORIES

■ Model 9201

Thermostatically mixes hot and cold water for the

tempering of flushing fluids for emergency equipment.

Suitable for multiple eye or face wash fixtures

or flows up to 25 GPM.

Specifications

Fail Safe Back Up: Liquid thermal thermostat with

tamper resistant control adjustment. System shuts

off all incoming hot water should cold water supply

fail. Should the hot water supply become interrupted

or the thermostatic element fails, the valve will go

into cold water bypass flow.

Tempered Water: The thermostatic element

responds to changes in incoming hot and cold water

temperatures to maintain outlet temperatures to +/-

5°F (2.5°C). Varying conditions can be up to a 30°F

(16°C) change in hot water temperature, 30°F

(16°C) change in cold water temperature, and a 50%

drop in inlet supply pressure. The factory setting is

80°F(26°C). The valve is constructed of bronze,

brass, copper and stainless steel and contains an

easy to replace thermostatic cartridge

Temperature Gauge: System includes outlet temperature

gauge.

Details

Supply: 1 1 ⁄4" IPS inlet and outlet. Haws recommends

isolation check valves be used at both supplies

(included).

ACCESSORIES

■ Model 9202

Thermostatically mixes large quantities of hot and

cold water in a wide range of flows for the tempering

of flushing fluids for emergency equipment. Suitable

for multiple eye or face wash fixtures and emergency

drench showers.

Specifications

Fail Safe Back Up: Liquid thermal thermostats

with tamper resistant control adjustment. System

shuts off all incoming hot water should cold water

supply fail. Redundant thermostatic elements provide

tempering even when one element fails. Should

the hot water supply become interrupted or the thermostatic

elements fail, the valve will go into cold

water bypass flow.

Tempered Water: Twin thermostatic elements

respond independently to changes in incoming hot

and cold water temperatures to maintain outlet temperatures

to +/- 5°F (2.5°C). Varying conditions can

be up to a 30°F (16°C) change in hot water temperature,

30°F (16°C) change in cold water temperature,

and a 50% drop in inlet supply pressure. Factory set

at 80°F(26°C), and designed for flows up to 60

GPM. The valve is constructed of bronze, brass,

copper and stainless steel and contains easy to

replace thermostatic cartridges.

Temperature Gauge: System includes 3 temperature

gauges for performance monitoring.

Details

Supply: 1 1 ⁄4" IPS inlet and outlet. Maximum inlet

pressure is 125 PSI. Inlets can be attached from top

or bottom. Haws recommends isolation check valves

be used at both supplies (included).


HAWS REPRESENTATIVES

ALABAMA

Plumbing

Delta Sales Co.

Tucker, GA

800-334-7116

Fax: 770-934-6865

Safety

Delta Sales

Tucker, GA

800-334-7116

Fax: 770-934-6865

ALASKA

Plumbing

Almex Alaska

Anchorage, AK

907-346-4669

Fax: 907-346-4675

Safety

Western Safety Associates

Banks, OR

503-324-7213

Fax: 503-324-2084

ARIZONA

Plumbing

KLM Sales, Inc.

Mesa, AZ

480-966-0049

Fax: 480-894-6312

Safety

Western Safety Associates

Scottsdale, AZ

602-315-6000

Fax: 602-391-0998

ARKANSAS

Plumbing

Mid-America Marketing

Memphis, TN

901-795-0045

Fax: 901-795-0394

Safety

Mc Crory & Associates

Greenwell Springs, LA

225-261-0576261-0576

Fax: 225-261-5226

CALIFORNIA

Plumbing

Northern:

RV and Associates, Inc.

Benicia, CA

707-745-3655

Fax: 707-745-2059

Southern:

Specification Sales Co.

Walnut, CA

909-594-7088

Fax: 909-594-2798

Safety

Western Safety Associates

Corona, CA

909-371-8685

Fax: 909-371-2496

COLORADO

Plumbing

The Dillon Co.

Denver, CO

303-399-5566

Fax: 303-399-2114

Safety

Mountain States Safety & Mktg.

Golden, Co

303-582-3611

Fax: 303-582-3759

CONNECTICUT

Plumbing

Croft and Smith, Inc.

Niantic, CT

860-739-4488

Fax: 860-739-9802

Safety

Lycknell Associates

Lexington, MA

781-862-8121

Fax: 781-860-7309

DELAWARE

Plumbing

Kent and Sussex Counties:

Burns Associates, Inc.

Severna Park, MD

410-544-5585

Fax: 410-544-6657

New Castle County Only:

Barbieri & Kline, Inc.

Glenside, PA

215-885-0440

Fax: 215-885-0446

Safety

Lycknell Associates

Wyomissing, PA

610-374-4292

Fax: 610-372-1019

DISTRICT OF COLUMBIA

Plumbing

Burns Associates, Inc.

Severna Park, MD

301-261-2216

Fax: 410-544-6657

Safety

Lycknell Associates

Wyomissing, PA

610-374-4292

Fax: 610-372-1019

FLORIDA

Plumbing

Northern:

SMI/Liphart

Atlanta, GA

800-257-5566

Fax: 800-642-2655

Pensacola and Panama City Only:

Delta Sales Co.

Tucker, GA

800-334-7116

Fax: 770-934-6865

Southern:

Harry Raskin, Inc.

N. Miami Beach, FL

305-653-2999

Fax: 305-651-9966

Safety

O’Hearn & Associates

Rome, GA

706-291-0393

Fax: 706-235-8512

Pensacola and Panama City Only:

Delta Sales

Tucker, GA

800-334-7116

Fax: 770-934-6865

GEORGIA

Plumbing

Delta Sales Co.

Tucker, GA

800-334-7116

Fax: 770-934-6865

Safety

Delta Sales

Tucker, GA

800-334-7116

Fax: 770-934-6865

HAWAII

Plumbing

L.N. Sales, Inc.

Honolulu, HI

808-531-6124

Fax: 808-945-7442

Safety

Western Safety Associates

Fullerton, CA

714-525-9276

Fax: 714-525-9276

IDAHO

Plumbing

Boise Area:

Braley-Gray & Associates

New Plymouth, ID

800-891-6972

Fax: 208-278-3691

Northern:

Johnson Industries, Inc.

Seattle, WA

800-548-6895

Fax: 206-763-1081

Southern:

Intermountain Specification Sales

Co., Inc.

Bountiful, UT

801-295-1199

Fax: 801-295-8013

Safety

Mountain States Safety & Mktg.

Draper, UT

801-495-2353

Fax: 801-495-2354

ILLINOIS

Plumbing

Central:

R.K. Ray Sales, Inc.

Decatur, IL

217-423-2544

Fax: 217-423-8285

Northern:

Miller Sales, Inc.

Addison, IL

630-458-8816

Fax: 630-458-9015

Rock Island & Moline:

Service Reps Inc.

Marion, IA

319-373-5523

Fax: 319-373-5533


Southern:

American Sales Co., Inc.

St. Louis, MO

314-231-6114

Fax: 314-231-6117

Safety

R.C. Bremer

Northfield, IL

847-256-3459

Fax: 847-441-0598

INDIANA

Plumbing

Lugar-Lutron, Inc.

Indianapolis, IN

800-486-9381

Fax: 877-844-4824

Lake, Porter & La Porte Counties

Only:

Miller Sales, Inc.

Addison, IL

630-458-8816

Fax: 630-458-9015

Safety

United Sales Associates

Fishers, IN

317-578-8093

Fax: 317-570-6678

Lake, Porter & La Porte Counties

Only:

R.C. Bremer

Northfield, IL

847-256-3459

Fax: 847-441-0598

IOWA

Plumbing

Service Reps Inc.

Marion, IA

319-373-5523

Fax: 319-373-5533

Safety

R.C. Bremer

Northfield, IL

847-256-3459

Fax: 847-441-0598

KANSAS

Plumbing

The Dworkin Co.

Kansas City, MO

816-531-2505

Fax: 816-756-0326

Safety

R.C. Bremer

St. Joseph, MO

816-671-9861

Fax: 816-671-9861

KENTUCKY

Plumbing

Lugar-Lutron, Inc.

Indianapolis, IN

800-486-9381

Fax: 877-844-4824

Safety

United Sales Associates

Simpsonville, KY

502-722-0233

Fax: 502-722-8408

LOUISIANA

Plumbing

ESP Agency, Inc.

Harahan, LA

504-733-0603

Fax: 504-734-7328

Safety

Mc Crory & Associates

Greenwell Springs, LA

225-261-0576

Fax: 225-261-5226

MAINE

Plumbing

R.F. Smith Associates

Lakeport (Laconia), NH

603-528-4122

Fax: 603-524-3898

Safety

Lycknell Associates

Lexington, MA

781-862-8121

Fax: 781-860-7309

MARYLAND

Plumbing

Burns Associates, Inc.

Severna Park, MD

410-544-5585

Fax: 410-544-6657

Safety

Lycknell Associates

Wyomissing, PA

610-374-4292

Fax: 610-372-1019

MASSACHUSETTS

Plumbing

Eastern:

R.F. Smith Associates

Lakeport (Laconia), NH

HAWS REPRESENTATIVES

603-528-4122

Fax: 603-524-3898

Western:

Croft and Smith, Inc.

Niantic, CT

860-739-4488

Fax: 860-739-9802

Safety

Lycknell Associates

Lexington, MA

781-862-8121

Fax: 781-860-7309

MICHIGAN

Plumbing

Knight Sales, Inc.

Redford Township, MI

313-534-9800

Fax: 313-534-3030

Upper Peninsula:

Tom Tiernan & Associates, Inc.

Brookfield, WI

262-790-1357

Fax: 262-790-1368

Safety

United Sales Associates

South Lyon, MI

248-486-9015

Fax: 248-486-9017

Upper Peninsula:

R.C. Bremer

Northfield, IL

847-256-3459

Fax: 847-441-0598

MINNESOTA

Plumbing

SCHU/Marketing Assoc., Inc.

Minneapolis, MN

612-593-5616

Fax: 612-593-5654

Safety

R.C. Bremer

Edina, MN

612-922-1118

Fax: 612-925-3741

MISSISSIPPI

Plumbing

Central & Southern:

ESP Agency, Inc.

Harahan, LA

504-733-0603

Fax: 504-734-7328

Northern:

Mid-America Marketing

Memphis, TN

901-795-0045

Fax: 901-795-0394

Safety

Mc Crory & Associates

Greenwell Springs, LA

225-261-0576

Fax: 225-261-5226

MISSOURI

Plumbing

Eastern:

American Sales Co., Inc.

St. Louis, MO

314-231-6114

Fax: 314-231-6117

Western:

The Dworkin Co.

Kansas City, MO

816-531-2505

Fax: 816-756-0326

Safety

R.C. Bremer

St. Joseph, MO

816-671-9861

Fax: 816-671-9861

MONTANA

Plumbing

Vemco Inc.

Billings, MT

406-248-8373

Fax: 406-248-8396

Vemco Inc.

Great Falls, MT

406-727-5335

Fax: 406-727-5997

Vemco Inc.

Missoula, MT

406-549-6113

Fax: 406-721-2941

Safety

Mountain States Safety & Mktg.

Draper, UT

801-495-2353

Fax: 801-495-2354

NEBRASKA

Plumbing

Service Reps Inc.

Omaha, NE

402-333-2095

Fax: 402-333-2610


HAWS REPRESENTATIVES

Safety

R.C. Bremer

St. Joseph, MO

816-671-9861

Fax: 816-671-9861

NEVADA

Plumbing

Northern:

RV and Associates, Inc.

Benicia, CA

707-745-3655

Fax: 707-745-2059

Southern:

Solomon Sales

Henderson, NV

702-269-7493

Fax: 702-269-7492

Safety

Northern:

Western Safety Associates

Byron, CA

925-634-2960

Fax: 925-634-7410

Southern:

Western Safety Associates

Fullerton, CA

714-525-9276

Fax: 714-525-9276

NEW HAMPSHIRE

Plumbing

R.F. Smith Associates

Lakeport (Laconia), NH

603-528-4122

Fax: 603-524-3898

Safety

Lycknell Associates

Lexington, MA

781-862-8121

Fax: 781-860-7309

NEW JERSEY

Plumbing

Barbieri & Kline, Inc.

Glenside, PA

215-885-0440

Fax: 215-885-0446

Safety

Lycknell Associates

Wyomissing, PA

610-374-4292

Fax: 610-372-1019

NEW MEXICO

Plumbing

Northern:

Winright Marketing

Albuquerque, NM

505-881-4820

Fax: 888-858-4853

Southern:

Winright Marketing

El Paso, TX

915-565-7377

Fax: 915-565-7378

Safety

Mountain States Safety & Mktg.

Golden, Co

303-582-3611

Fax: 303-582-3759

NEW YORK

Plumbing

Albany-Schenectady:

Van Amburgh Associates, Inc.

Albany, NY

518-438-3136

Fax: 518-438-3288

Buffalo-Rochester Area:

T.I.A. Sales Co.

East Aurora, NY

716-652-8520

Fax: 716-652-0338

New York City & Vicinity:

Metro Rep

New Hyde Park, NY

516-616-4650

Fax: 516-616-4605

Syracuse:

Van Amburgh Associates, Inc.

Syracuse, NY

315-472-9243

Fax: 315-472-9255

Safety

Buffalo-Rochester Area:

United Sales Associates

Cincinnati, OH

513-231-4266

Fax: 513-231-1456

Metropolitan:

Lycknell Associates

Wyomissing, PA

610-374-4292

Fax: 610-372-1019

NORTH CAROLINA

Plumbing

Creedeco, Inc.

Raleigh, NC

919-787-8111

Fax: 919-787-4005

Creedeco, Inc.

Matthews, NC

704-821-7777

Fax: 704-821-6884

Safety

O’Hearn & Associates

Mt. Airy, NC

336-786-5858

NORTH DAKOTA

Plumbing

Eastern:

SCHU/Marketing Assoc., Inc.

Minneapolis, MN

612-593-5616

Fax: 612-593-5654

Western:

Vemco Inc.

Billings, MT

406-248-8373

Fax: 406-248-8396

Safety

R.C. Bremer

Edina, MN

612-922-1118

Fax: 612-925-3741

OHIO

Plumbing

Promarc Sales, Inc.

Garfield Heights, OH

888-584-7468

Fax: 888-584-7469

Promarc Sales, Inc.

Galloway, OH

614-207-8477

Fax: 614-870-8994

Safety

United Sales Associates

Cincinnati, OH

513-231-4266

Fax: 513-231-1456

United Sales Associates

Painesville, OH

440-354-0300

Fax: 440-354-5128

OKLAHOMA

Plumbing

Pannell Associates, Inc.

Tulsa, OK

918-664-7732

Fax: 918-664-6333

Safety

Mc Crory & Associates

Denison, TX

903-786-6204

Fax: 903-786-9895

OREGON

Plumbing

Braley-Gray & Assoc., Inc.

Portland, OR

503-249-6972

Fax: 503-288-4464

Safety

Western Safety Associates

Banks, OR

503-324-7213

Fax: 503-324-2084

PENNSYLVANIA

Plumbing

Eastern:

Barbieri & Kline, Inc.

Glenside, PA

215-885-0440

Fax: 215-885-0446

Western:

Musillo Sales Agency

West Homestead, PA

412-461-4544

Fax: 412-461-4881

Safety

Eastern:

Lycknell Associates

Wyomissing, PA

610-374-4292

Fax: 610-372-1019

Western:

United Sales Associates

Painesville, OH

440-354-0300

Fax: 440-354-5128

RHODE ISLAND

Plumbing

R.F. Smith Associates

Lakeport (Laconia), NH

603-528-4122

Fax: 603-524-3898


Safety

Lycknell Associates

Lexington, MA

781-862-8121

Fax: 781-860-7309

SOUTH CAROLINA

Plumbing

Creedeco, Inc.

Columbia, SC

803-407-2643

Fax: 803-407-2649

Safety

O’Hearn & Associates

Mt. Airy, NC

336-786-5858

SOUTH DAKOTA

Plumbing

Eastern:

SCHU/Marketing Assoc., Inc.

Minneapolis, MN

612-593-5616

Fax: 612-593-5654

Western:

Vemco Inc.

Rapid City, SD

605-394-5790

Fax: 605-394-5791

Safety

R.C. Bremer

Edina, MN

612-922-1118

Fax: 612-925-3741

TENNESSEE

Plumbing

Central:

Mid-America Marketing

Nashville, TN

615-259-9944

Fax: 615-259-5111

Eastern:

Delta Sales Co.

Tucker, GA

800-334-7116

Fax: 770-934-6865

Western:

Mid-America Marketing

Memphis, TN

901-795-0045

Fax: 901-795-0394

Safety

Central:

O’Hearn & Associates

Knoxville, TN

423-691-5932

Fax: 423-691-5932

Eastern:

Delta Sales

Tucker, GA

800-334-7116

Fax: 770-934-6865

Western (Memphis area):

Mc Crory & Associates

Greenwell Springs, LA

225-261-0576

Fax: 225-261-5226

TEXAS

Plumbing

Dallas:

The Thompson Co.

Plano, TX

972-516-8981

Fax: 972-516-1689

El Paso:

Winright Marketing

El Paso, TX

915-565-7377

Fax: 915-565-7378

Houston:

Jim Bell & Associates

Spring, TX

281-362-7515

Fax: 281-362-7516

San Antonio:

Steve Mechler and Assoc., Inc.

San Antonio, TX

210-545-0084

Fax: 210-545-7535

Safety

Mc Crory & Associates

Denison, TX

903-786-6204

Fax: 903-786-9895

Houston:

Daniel Sales Co.

Spring, TX

281-350-2300

Fax: 281-350-2343

Statewide except Houston:

Mc Crory & Associates

Webster, TX

281-480-1369

Fax: 281-480-1795

HAWS REPRESENTATIVES

UTAH

Plumbing

Intermountain Specification Sales

Co., Inc.

Bountiful, UT

801-295-1199

Fax: 801-295-8013

Safety

Mountain States Safety & Mktg.

Draper, UT

801-495-2353

Fax: 801-495-2354

VERMONT

Plumbing

Van Amburgh Associates, Inc.

Albany, NY

518-438-3136

Fax: 518-438-3288

Safety

Lycknell Associates

Lexington, MA

781-862-8121

Fax: 781-860-7309

VIRGINIA

Plumbing

Central Sales, Inc.

Newport News, VA

757-244-3333

Fax: 757-244-7077

Fairfax, Loudoun, Fauquier, Prince

William & Stafford Counties Only:

Burns Associates, Inc.

Severna Park, MD

301-261-2216

Safety

Lycknell Associates

Wyomissing, PA

610-374-4292

Fax: 610-372-1019

WASHINGTON

Plumbing

Johnson Industries, Inc.

Seattle, WA

800-548-6895

Fax: 206-763-1081

Safety

Western Safety Associates

Banks, OR

503-324-7213

Fax: 503-324-2084

WEST VIRGINIA

Plumbing

Bush-Spradling

Hurricane, WV

304-757-5770

Fax: 304-757-6811

Weirton & Weeling Only:

Musillo Sales Agency

West Homestead, PA

412-461-4544

Fax: 412-461-4881

Safety

United Sales Associates

Cincinnati, OH

513-231-4266

Fax: 513-231-1456

WISCONSIN

Plumbing

Tom Tiernan & Associates, Inc.

Brookfield, WI

262-790-1357

Fax: 262-790-1368

Eau Claire, La Crosse, & Superior

Only:

SCHU/Marketing Assoc., Inc.

Minneapolis, MN

612-593-5616

Fax: 612-593-5654

Safety

R.C. Bremer

Northfield, IL

847-256-3459

Fax: 847-441-0598

WYOMING

Plumbing

Northern:

Vemco Inc.

Billings, MT

406-248-8373

Fax: 406-248-8396

Southern:

The Dillon Co.

Denver, CO

303-399-5566

Fax: 303-399-2114

Safety

Mountain States Safety & Mktg.

Golden, Co

303-582-3611

Fax: 303-582-3759


NOTES

More magazines by this user
Similar magazines