Installation and Configuration Guide for Linux® Workstations

More documents

Recommendations

Info

34 | Chapter 4 Install Linux 4 Append a line to /etc/fstab so the filesystem is mounted at startup, for example: /dev/vg00/lvol1 /mnt/ StorageMedia xfs rw,noatime,inode64 5 Optional: Confirm that the filesystem can mount automatically by rebooting the workstation and using the command df -h again.
Installing Your Software Prepare the installation media Check the release announcement to find out on what media the installers are available. Major releases are distributed on a USB device. To mount a USB device: ■ Attach the device. Log in to the terminal as root. ■ Use the dmesg command to output something like sdf: sdf1 to list a recent device connected. Or list the devices attached to your system with the command: fdisk -l | grep "/dev/sd". The device assigned to the USB device should look similar to /dev/sds or /dev/sde ■ On a fresh Red Hat installation, automount is enabled , but execution from the device is disabled. So you must unmount the USB drive with eject / or eject /dev/. ■ Create a mount point directory for the disk with mkdir /mnt/usbdisk. ■ Mount the device mount -o shortname=winnt /dev/1 /mnt/usbdisk. Or from the GUI browse to /dev, right-click the USB device, and choose Mount. Software is sometimes distributed as tar files. To extract from a tar file: 1 In a terminal, as root, use the md5sum command to verifty the checksum matches the md5sum listed in the checksum file. 2 Extract the from the tar archive with tar -zxvf filename.tar.gz. Install Flame Premium Prerequistes ■ If you need to change your system date or time, do it before installing the application. ■ Archive existing media on the framestore (highly recommended). Refer to the “Archiving” topic in the application help. ■ Prepare the installation media (page 35) to access the install directory. 5 35
Page 1 and 2: ® Autodesk ® Flame Premium 2013 A
Page 3 and 4: Contents Chapter 1 Installation wor
Page 5 and 6: Installation workflows This guide c
Page 7 and 8: System requirements Hardware requir
Page 9 and 10: Hardware configuration 3 If you are
Page 11 and 12: There are two kinds of Lustre works
Page 13 and 14: Peripheral connections overview Ada
Page 15 and 16: Lucid ADA 88192 Audio Converter Con
Page 17 and 18: The storage can be connected to the
Page 19 and 20: Connect media storage | 15
Page 21 and 22: ■ The total number of enlcosures
Page 23 and 24: NOTE The XR 5402 and XR 5412 RAID e
Page 25 and 26: While Autodesk Media and Entertainm
Page 27 and 28: Install Linux To prepare your syste
Page 29 and 30: etc/sysconfig/network-scripts/ifcfg
Page 31 and 32: This can be done with version 1.5 o
Page 33 and 34: 2 Create the LUNs. 3 Power off the
Page 35 and 36: 4 Repeat for each disk. To partitio
Page 37: meta-data=/dev/vg00/lvol1 agcount=1
Page 41: ■ To use the new configuration fi
Page 44 and 45: ■ On the mounted filesystem creat
Page 46 and 47: 2 Use the 2007, 2008, 2009, 2010, o
Page 48 and 49: 2 Activate the new network share fo
Page 50 and 51: Burn for Lustre This is the Linux r
Page 52 and 53: 2 Insert the first installation dis
Page 54 and 55: Configure backburner server to dete
Page 56 and 57: Port All computers on the BrowseD n
Page 58 and 59: This function receives the followin
Page 60 and 61: Attribute dst_host dst_path Attribu
Page 62 and 63: Attribute src_path dst_os dst_path
Page 64 and 65: ■ Separate your media and metadat
Page 66 and 67: Reserving Bandwidth for an Applicat
Page 68 and 69: Perform the steps in the procedure
Page 70 and 71: By default, the configuration file
Page 72 and 73: NOTE If you are using XFS and unwri
Page 74 and 75: Verifying that Stone and Wire Proce
Page 76 and 77: 2 Depending on the result of the pr
Page 78 and 79: 6 If you continue to get error mess
Page 80 and 81: Option: MB/sec: 111.509057 Ping suc
Page 82 and 83: As root, open a terminal on your wo
Page 84 and 85: Network licensing 3 Select Node-Loc
Page 86 and 87: 2 Log in to support portal: https:/
Page 88 and 89:
Change the default port used by the
Page 90 and 91:
Type: -v -H -V -i -r --red-frames T
Page 93 and 94:
Index A AMD starting daemon 77 appl
Page 95 and 96:
NFS 39 starting daemon 77 O operati
show all

Installation and Configuration Guide for Linux® Workstations

Create successful ePaper yourself

Delete template?

Save as template?