Nokia Mobile VPN

More documents

Recommendations

Info

Creating VPN Client policy Before the Nokia Mobile VPN Client policy can be created, a device certificate and CA certificate for Nokia Mobile VPN Client must be available. In this example, the PKCS#12 packet is used to deliver the device certificate, and the CA certificate is delivered separately in its own file. Start Nokia VPN Client Policy Tool and press the Load Template button. Select the Cisco_3000_rsasig.pol policy from the Cisco\3000 Concentrator directory.
Add the correct VPN gateway address and get the path to your CA certificate (not needed if the CA certificate is part of the PKCS#12 packet). Make sure that the Format in Certificate Authority selection is set to BIN. Do the same to the PKCS#12 packet. If silent authentication is desired (the PIN code for the certificate is not requested), this option needs to be activated from the Advanced View. Go to Advanced View, open the IKE tree, and select “Cert store” to be DEVICE instead of USER. Note that only selected S60 3 rd Edition, Feature Pack 1 devices support Device store. See the release notes for more information. Policy also uses e-mail address as identity from client certificate, so make sure it is added into the certificate. Other advice: you can change Identity type value from RFC822_NAME to something else To export the VPN policy, press the Generate VPN Policy button, and store Cisco_3000_rsasig.vpn to your PC. Consult the Nokia Mobile VPN Client User’s Guide, Chapter 6.1, for details on how to install a given policy file to your device.
Page 1 and 2: Nokia Mobile VPN How to configure N
Page 3 and 4: Introduction This document is based
Page 5 and 6: Certificate management Importing CA
Page 7 and 8: Select the certificate file and cli
Page 9 and 10: Enrolling identity certificate Clic
Page 11 and 12: Here is a sample of the certificate
Page 13 and 14: Certificate Management screen shoul
Page 15 and 16: Enter the address range for this IP
Page 17 and 18: DNS server configuration Navigate t
Page 19 and 20: Defining policies for CRACK authent
Page 21 and 22: Enter the name of the SA (“CRACK_
Page 23 and 24: In the Identity tab, enter the name
Page 25 and 26: Navigate to Configuration | User Ma
Page 27 and 28: Creating VPN client policy Before t
Page 29 and 30: Defining policies for certificate a
Page 31 and 32: From the “Inactive Proposals” l
Page 33 and 34: Enter the name of the SA (“CERT_S
Page 35 and 36: Defining user group for certificate
Page 37: Navigate to Configuration | Policy

Nokia Mobile VPN

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?