UI-Kennlinienmeßgerät für Solarmodule und -generatoren

pvengineering

UI-Kennlinienmeßgerät für Solarmodule und -generatoren

PVPM Users Manual Page 21

Messages

'Values not evaluablely' Data is not sufficient for calculation. Redo the

measurement

Voltage too high! Immediately switch off the generator with the

external security switch! The device could be

damaged by the high voltage!

Service required! The device is damaged internally and requires

test and repair through authorised personell.

Wrong polarity! The measuring cables are mounted in the

wrong way! Switch off the generator with the

external security switch immediately! The

device will short circuit the generator if the

polarity is wrong and can take harm. If you

disconnect the cables under voltage a light arc

can cause serious damage to health and

material

PV-Engineering GmbH

More magazines by this user
Similar magazines