UI-Kennlinienmeßgerät für Solarmodule und -generatoren


UI-Kennlinienmeßgerät für Solarmodule und -generatoren

PVPM Users Manual Page 34


Caution: Carrying out this function can not be cancelled!!

When you select data transfer the data sets will be transferred

one after the other and the files are stored to disk automatically

using a file name that contains the date and time of the


8.4.3 Synchronize PVPM to PC date/time

With this function the internal real time clock of the PVPM1000C

is set to the PCs date/time.

8.4.4 Modify PVPM sensor database

You can connect different irradiance sensors to the PVPM. Every

sensor has its own calibration value, so PVPM needs to know

this value for correct operation. To

make this simple during

measurement you can define a table

with up to ten different sensors, its

names and calibration values, which

will be stored in the PVPMs permant

memory. So later on you just have to

select the appropriate sensor. The

name you give the sensor is more or

less free. It will be displayed later on

on PVPMs display and informs you

about the actually selected sensor.

You can select the sensor at the

PVPM via the menu “Service” and “Select sensor”.

If you want to use this function the PVPM must be connected

and ready for data transfer! When you start this function the

database is loaded from PVPM and will be stored back to PVPM

when you close this form.

To enter a new value just select a free line and enter the values

in the edit fields below the table.

PV-Engineering GmbH

More magazines by this user
Similar magazines