Batten luminaires - Alfred Pracht Lichttechnik GmbH

Batten luminaires
01with
reflectors
Protection Class II according to VDE 0711/EN 60598
Ingress protection IP65
Dust-proof
Jet-proof
Shock (RC) 0.63**
230V/50 Hz
Type (VDE designation) Watt Inductive Compensated Electronic ballast L Weight
Art.-No. Art.-No. Art.-No. (mm) (kg)
Individual luminaire with pralux ® parabolic mirror reflector 090 made of acrylic glass (PMMA), without through-wiring
PPR SR 100/1 PSR-PLEX-IG 090 1 x 18 140 100 140 101 140 103 630±2 2.4
PPR SR 100/3 PSR-PLEX-IG 090 1 x 36 140 230 140 231 140 233 1240±2 3.1
PPR SR 100/5 PSR-PLEX-IG 090 1 x 58 140 360 140 361 140 363 1540±2 4.1
Luminaire for individual and continuous mounting with pralux ® parabolic mirror reflector 090 made of acrylic glass (PMMA), with through-wiring 2 x 1.5 mm 2
PPR SR 112/1 PSR-PLEX-IG 090 1 x 18 141 100 141 101 141 103 630±2 2.4
PPR SR 112/3 PSR-PLEX-IG 090 1 x 36 141 230 141 231 141 233 1240±2 3.1
PPR SR 112/5 PSR-PLEX-IG 090 1 x 58 141 360 141 361 141 363 1540±2 4.1
Luminaire for continuous mounting with pralux ® parabolic mirror reflector 090 made of acrylic glass (PMMA), with through-wiring 4 x 1.5 mm 2
PPR SR 114/1 LB PSR-PLEX-IG 090 1 x 18 142 100 142 101 142 103 630±2 2.4
PPR SR 114/3 LB PSR-PLEX-IG 090 1 x 36 142 230 142 231 142 233 1240±2 3.1
PPR SR 114/5 LB PSR-PLEX-IG 090 1 x 58 142 360 142 361 142 363 1540±2 4.1
Individual luminaire with pralux ® with parabolic mirror reflector 090 made of impact-resistant polycarbonate (PC), without through-wiring
PPR SR 100/1 PSR-MAK-IG 090 1 x 18 140 110 140 111 140 113 630±2 2.4
PPR SR 100/3 PSR-MAK-IG 090 1 x 36 140 240 140 241 140 243 1240±2 3.1
PPR SR 100/5 PSR-MAK-IG 090 1 x 58 140 370 140 371 140 373 1540±2 4.1
Luminaire for individual and continuous mounting with pralux ® parabolic mirror reflector 090 made of impact-resistant polycarbonate (PC), with through-wiring 2 x 1.5 mm 2
PPR SR 112/1 PSR-MAK-IG 090 1 x 18 141 110 141 111 141 113 630±2 2.4
PPR SR 112/3 PSR-MAK-IG 090 1 x 36 141 240 141 241 141 243 1240±2 3.1
PPR SR 112/5 PSR-MAK-IG 090 1 x 58 141 370 141 371 141 373 1540±2 4.1
Luminaire for continuous mounting with pralux ® parabolic mirror reflector 090 made of impact-resistant polycarbonate (PC), with through-wiring 4 x 1.5 mm 2
PPR SR 114/1 LB PSR-MAK-IG 090 1 x 18 142 110 142 111 142 113 630±2 2.4
PPR SR 114/3 LB PSR-MAK-IG 090 1 x 36 142 240 142 241 142 243 1240±2 3.1
PPR SR 114/5 LB PSR-MAK-IG 090 1 x 58 142 370 142 371 142 373 1540±2 4.1
Extra cost:
El. bal. Dim 1–10V (add to electronic ballast version) 685 004
El. bal. Dim Dali (add to electronic ballast version) 685 005
El. bal. Industry (add to electronic ballast version) 36/58 685 006
**Shock version 100 999
Variants: For covers with louvers please complete basic models Avus, Monza, Monza-LBW with accessories!
26
Listed with the
Deutsche Bahn AG
*
Luminaire Monaco T8
for FL T8/26 mm
single-lamp
Utmost energy efficiency owing to
modern pralux ® engineering!
10
Housing: Tubular housing, fully sealed, made of white, fiberglass-reinforced
polyester, essentially fully resistant against acids and alkalis.
Socket end pieces: One-piece socket ends made of PBT.
Socket: Two-slot plug-in socket with silver-plated contacts.
Lamp cover: Parabolic mirror reflector, all-round distribution, made of acrylic glass
(PMMA) or polycarbonate (PC), impact-resistant, adjustable, internal ribbing.
Seals: Short, age-resistant silicone seals.
Electrical components: Low loss ballast B1 starter; electronic ballast;
through-wiring max. 7 x 2.5 mm 2 .
Installation: Variable mounting points with Pracht Clip System made of
stainless steel. Suitable for ceiling, pendant and horizontal wall mounting.
Befestigungslochabstand
77±1 Variable mounting points
variabel
90°
105±1
Areas of application: Food industry, beverage industry, heavy industry, steel industry, auto repair workshops, maintenance halls,
gardening centers and greeneries, lighting height of 3–7 meters.
Design with internal, white cross blade louvers. Design with mirrored internal ring dark-light louvers.
160±2
*For versions with electronic ballast:
Identification
Luminaires must be operated
with covers in place!
L