COMAND - Mercedes Benz USA

Dolby Digital
DTS
MLP
Setting Surround Sound
You can select LOGIC7 ® on or LOGIC7 ® off
in surround sound mode.
X Select Sound£Surround.
Surround sound setting (display image may differ
depending on model)
Basic Functions of COMAND 37
X To select the setting: Rotate ymz or slide
qmr.
X To save the setting: Press n.
The setting is stored and you exit the menu.
X To exit the menu without changes: Press
the k button or slide omp.
i Please note the following:
RFor the optimum audio experience for all
passengers when LOGIC7 ® is switched
on, the balance and fade should be set to
the center of the passenger
compartment.
RYou will achieve the best sound results
by playing high-quality audio and DVD
Video.
RMP3 tracks should have a bit rate of at
least 128 kbit/s.
RSurround-sound playback does not work
for mono signal sources, such as the AM
waveband in radio mode.
RIf the radio reception is poor, e.g. in a
tunnel, you should switch off LOGIC7 ®
because it may otherwise switch
automatically between stereo and mono
and therefore distort the sound
temporarily.
ROn some stereo recordings, the sound
characteristics may differ from
conventional stereo playback.
Z
At a Glance