Hull and Stability

Pt B, Ch 1, Sec 3
Table 3 : Plans and documents to be submitted depending on additional class notations (1/3/2008)
Additional class notation Plans or documents
DMS See Pt F, Ch 13, Sec 11, [1.2]
ICE CLASS IA SUPER
ICE CLASS IA
ICE CLASS IB
ICE CLASS IC
ICE CLASS ID
The plans relevant to shell expansion and fore and aft part structures are to define (see Pt F, Ch 9,
Sec 1, [2.2]) the maximum draught LWL, the minimum draught BWL (both draughts at midship, fore
and aft ends), and the borderlines of fore, midship and aft regions defined in Pt F, Ch 9, Sec 2, [1.2]
LASHING Lashing arrangement plans, indicating:
container arrangement in holds, on decks and on hatch covers, with specification of the gross
mass of each container and of each container stack
arrangement of mobile lashing equipment with the specific location of the various pieces of
equipment
Complete list of the mobile lashing equipment, with detailed drawing and indication of materials,
safety working loads, breaking loads or test loads
Removable load-bearing structures for containers, such as guides, cells, buttresses, etc., connected to
the hull structure or to hatch covers
MON-HULL See Pt F, Ch 5, Sec 1, [1.2]
POLAR CLASS PC1
POLAR CLASS PC2
POLAR CLASS PC3
POLAR CLASS PC4
POLAR CLASS PC5
POLAR CLASS PC6
POLAR CLASS PC7
SPM See Pt F, Ch 13, Sec 4, [2]
The plans relevant to shell expansion and fore and aft part structures are to define the maximum
draught at UIWL, the minimum draught at LIWL (both draughts at midship, fore and aft ends), and the
borderlines of hull areas in longitudinal and vertical directions as indicated in Pt F, Ch 10, Sec 2, [1.1]
as well as the other items required for the structural checks as per Pt F, Ch 10, Sec 2, [4] and Pt F,
Ch 10, Sec 2, [6].
RINA Rules 2012 27