12" Deluxe Dovetail Jig Combination Kit - Normand
12" Deluxe Dovetail Jig Combination Kit - Normand
12" Deluxe Dovetail Jig Combination Kit - Normand
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Dovetail</strong> <strong>Jig</strong><br />
24" OMNIJIG Joinery System<br />
• Adjustable finger template enables user to cut variable-spaced half-blind and through dovetails<br />
• Fixed-space, half-blind dovetails can also be cut with a single pass of the router on this versatile jig<br />
• Adjustable, split finger design allows user to change both position and width of the pins for the chosen joint style<br />
• Durable base design allows for clamping or bolting directly onto work bench<br />
• "Set & Forget" template positioning stops and router bit depth gauges minimize test cuts and provide<br />
repeatability across applications<br />
77240<br />
MSRP. $899<br />
<strong>Dovetail</strong> & Joiner<br />
12" <strong>Deluxe</strong> <strong>Dovetail</strong> <strong>Jig</strong><br />
• Board alignment lines and router bit depth gauges allow for quick,<br />
easy set-up<br />
• Router bit depth gauges allow the user to set bit depth without<br />
measuring<br />
• Accommodates stock from 1/4" to 1-1/8" thick<br />
55160<br />
MSRP. REG. $000 $699<br />
12" <strong>Deluxe</strong> <strong>Dovetail</strong> <strong>Jig</strong> <strong>Combination</strong> <strong>Kit</strong><br />
• Template alignment lines and router bit depth gauage allow for quick,<br />
easy set-up<br />
• Router bit depth gauges allow the user to set bit depth<br />
without measuring<br />
• On-board instructions provide clear user guidance for the various<br />
applications<br />
4216<br />
Nailers Stapler Router Compressor<br />
18 Ga., 2" Brad Nailer <strong>Kit</strong><br />
• Drives 18 gauge nails from 5/8” to 2” length<br />
• Tool-free depth-of-drive adjustment<br />
• Tool-free jam release mechanism<br />
BN200B<br />
REG. MSRP. $000 $125<br />
16 Ga., 2-1/2" Finish Nailer <strong>Kit</strong><br />
• Drives 16 Ga. "FN" style finish nails from<br />
1” to 2-1/2” length<br />
• Maintenance-free motor<br />
FN250C<br />
MSRP. REG. $000 $173<br />
18 Ga., 1-1/2" Narrow Crown Stapler <strong>Kit</strong><br />
• Internal piston catch<br />
• Drives 18 gauge staples with 1/4” crown from<br />
1/2” to 1-1/2” length<br />
NS150B<br />
REG. MSRP. $000 $132<br />
22 Ga., 3/8" Upholstery Stapler<br />
• Uses standard Senco ® "C" Type, 22 Ga., 3/8"<br />
crown staples<br />
• 1" nose extension for limited clearance fastening<br />
US58<br />
REG. MSRP. $000 $123<br />
MSRP. REG. $000 $259<br />
PC Compressor 10.1scfm@90psi, 60gal, 135psi max<br />
• Soft-starting, 12 Amp motor<br />
• Variable-speed control<br />
• 6-position adjustable turret<br />
895PK<br />
MSRP. REG. $000 $389<br />
3-1/4 HP Five-Speed Motor<br />
• 15 amp motor provides the power and durability for the tougest<br />
applications<br />
• Auto release collet system allows for easy bit removal<br />
7518<br />
MSRP. REG. $000 $499<br />
12" <strong>Dovetail</strong> <strong>Jig</strong><br />
• Accommodates stock from 1/4" to 1-1/8" thick<br />
• Heavy-duty cam-style clamps with sandpaper backed locking<br />
bars provide a firm grip of the wood<br />
• Includes 4211 template for half-blind, rabbeted half-blind<br />
and sliding dovetails<br />
4210<br />
12" <strong>Deluxe</strong> <strong>Dovetail</strong> <strong>Jig</strong><br />
• Accommodates stock from 1/4" to 1-1/8" thick<br />
• Heavy-duty cam-type clamps with sandpaper-backed locking<br />
bars provide solid grip of wood<br />
• Machined aluminum templates provide superior cutting<br />
accuracy and long term durability<br />
4212<br />
<strong>Deluxe</strong> Plate Joiner <strong>Kit</strong><br />
• 7.5 Amp, 120 V, AC only, 10,000 RPM<br />
• 1" O.D. dust port accepts standard bag or can be connected<br />
to a vacuum<br />
• Fence tilts from 0° to 135° with positive adjustable stop at 90°<br />
• Precise micro height-adjustment knob<br />
557<br />
MSRP. REG. $000 $169<br />
MSRP. REG. $000 $229<br />
MSRP. REG. $000 $299<br />
PC Compressor 10.1scfm@90psi, 60gal, 135psi max<br />
• 3.0 Running HP allows for high SCFM and quick compressor recovery time<br />
• 60 gallon (ASME) tank supports heavy-duty air tool usage<br />
• 135 Max PSI allows for longer air tool run time<br />
C7501<br />
PC Compressor 10.1scfm@90psi, 60gal, 135psi max<br />
• 3.0 Running HP allows for high SCFM and quick compressor recovery time<br />
• 60 gallon (ASME) tank supports heavy duty air tool usage<br />
• 135 Max PSI allows for longer air tool run time<br />
C5512<br />
MSRP. REG. $000 $899<br />
MSRP. REG. $000 $749<br />
NEW!<br />
Band Saws<br />
Prices & specifications subject to change without notice.<br />
Prices in effect from September 1 to December 31, 2009. While Quantities Last.<br />
14" Band Saw with Enclosed Stand<br />
14" Band Saw with 1 HP Motor & Enclosed Stand 14" Band Saw with 3/4 HP Motor & Open Stand<br />
Unisaw<br />
• Cut graceful curves, resaw thick hardwood<br />
• Nine-spoke precision-balanced wheels<br />
• Full 16" x 16" cast-iron table tilts 45°<br />
right and 3° left for beveling operations<br />
• Quick release tension lever<br />
• 4" Integral dust port<br />
28-475X *Limited Quantities Available<br />
Drilling Machines<br />
20" Variable-Speed Drill Press<br />
• Heavy-duty 1 HP motor<br />
• Large quill stroke capacity<br />
• A quick-adjust depth stop<br />
• Large, redesigned base<br />
• Integrated task light<br />
20-950<br />
BONUS LEVEL 2<br />
MSRP. $1,699<br />
MSRP. $1,099<br />
17" Laser Drill Press<br />
• Heavy-duty 3/4 HP motor<br />
• Fully adjustable laser pod<br />
• Large, redesigned base<br />
• A quick-adjust depth stop<br />
• Large quill stroke capacity<br />
• Integrated task light<br />
17-959L<br />
MSRP. $799<br />
• Nine-spoke precision-balanced wheel<br />
• Full 16" x 16" cast-iron table tilts 45°<br />
right and 3° left for beveling operation<br />
• Quick release tension lever<br />
• 4" Integral dust port<br />
28-206<br />
MSRP. $1,099<br />
Dealer Stamp<br />
Planers<br />
15" Planer with <strong>Deluxe</strong> Stand<br />
MSRP. $2,099<br />
• Nine-spoke precision-balanced wheels.<br />
• Full 16" x 16" cast-iron table tilts 45°<br />
right and 3° left for beveling operations<br />
• Quick release tension lever<br />
• 4" Integral dust port<br />
28-276<br />
• 3 HP, 240V, 1 Phase, 60 Hz<br />
• 15,000 CPM; 5,000 RPM<br />
• 15" x 62-1/2" table<br />
• Spiral serrated steel infeed roller and polyurethane<br />
outfeed roller<br />
• Rugged chain and sprocket drive provides<br />
positive feeding and long running life<br />
22-790X<br />
BONUS LEVEL 2 BONUS LEVEL 2 BONUS LEVEL 2<br />
MSRP. $899<br />
3 HP 10" UNISAW with 52" BIESEMEYER Fence System<br />
• 3 HP, 230V, 1 Phase, 60 Hz motor<br />
• Single-Cast Trunnion System<br />
• Dual Front Cranks<br />
• The Bevel Dial allows fine tuning of the blade bevel<br />
• BIESEMEYER Fence System provides hairline pointer and built-in tape<br />
www.deltaportercable.com www.deltaportercable.com www.deltaportercable.com<br />
BONUS LEVEL 1<br />
BONUS LEVEL 1<br />
36-L352<br />
®<br />
40” Package<br />
OR<br />
371<br />
OR<br />
690LR<br />
BONUS LEVEL 2<br />
NEW!<br />
MSRP. $4,299<br />
40” Package<br />
+<br />
24” Package<br />
OR<br />
690LR<br />
371
Sanders<br />
6" Belt/12" Disc Sanding Center<br />
• Sturdy, cast-iron tables tilt 0° to 45° for bevel sanding<br />
• Sturdy steel stand for greater stability<br />
• Eccentric belt tracking control for easy,<br />
accurate belt alignment<br />
31-300<br />
MSRP. $1,399<br />
Hybrid Table Saws<br />
MSRP. $2,199<br />
LEFT TILT RIGHT TILT<br />
10" Left-Tilt Hybrid Saw w/BC30 30" BIESEMEYER ®<br />
Commercial Fence System, Rail and Table Board<br />
• 1-3/4 HP, 120/240 motor<br />
• Side table board included<br />
• 30" BIESEMEYER ® Commercial Fence System<br />
36-717B<br />
18" x 36" Drum Sander<br />
• Powerful 1-1/2 HP induction motor with a 6 groove belt<br />
• Large sturdy steel cabinet style base<br />
• Blow-molded integral dust hood<br />
• Up-front, motor controls and redesigned<br />
easy-to-read thickness gauge<br />
31-260X<br />
BONUS LEVEL 2<br />
Radial Saws Shapers & Stock Feeders<br />
12" Radial Arm Saws<br />
• Unique turret arm action permits saw blade<br />
to rotate 360° above work table<br />
• Precision indexing with positive stops<br />
for 90° and 45°<br />
33-890<br />
BONUS LEVEL 2<br />
10" Professional Radial Arm Saw<br />
• Depth-of-cut control handle and locking levers<br />
• Cast-iron track, column and column support<br />
• Steel stand for sturdy support<br />
RS830<br />
Heavy-Duty Wood Shaper<br />
• 5 HP, 230V, 1 Phase, 60 Hz motor<br />
• 7,000 & 10,000 RPM<br />
• Poly-V drive system transmits more efficient<br />
torque to the spindle<br />
43-455<br />
Production Stock Feeder<br />
• 1 HP, 240V, 60 Hz, 1 Phase motor<br />
• 13, 26, 36, 72 FPM<br />
• 3 rubber feed rollers<br />
36-851<br />
BONUS LEVEL 2 BONUS LEVEL 2 BONUS LEVEL 2<br />
BONUS LEVEL 2<br />
REG. $3,599<br />
10” Left-Tilt <strong>Deluxe</strong> Hybrid Saw w/50” Biesemeyer Fence<br />
System, Rail and Table Board<br />
• 1-3/4 HP continuous duty, fan-cooled motor 115/230 volts<br />
(wired 115V)<br />
• Independent height and bevel adjustment wheels<br />
• Large cast-iron table with two cast-iron wings<br />
• Left tilting blade<br />
36-750B<br />
BONUS LEVEL 2<br />
BONUS LEVEL 2<br />
®<br />
10" Right-Tilt Hybrid Saw w/BC30 30" BIESEMEYER ®<br />
Commercial Fence System, Rail and Table Board<br />
• 1-3/4 HP, 120/240 motor<br />
• Side table board included<br />
• 30" BIESEMEYER ® Commercial Fence System<br />
36-720<br />
BONUS LEVEL 2<br />
MSRP. $1,799 MSRP. $1,799<br />
LEFT TILT RIGHT TILT<br />
10" Left-Tilt Hybrid Saw w/T2-30<br />
30" Fence System<br />
• 1-3/4 HP, 120/240 motor<br />
• Left-tilting blade tilts away from fence<br />
• 45° and 90° bevel stops adjustable from the table top<br />
36-715B<br />
10" Left-Tilt Hybrid Saw w/30" UNIFENCE ® ,<br />
Rail and Table Board<br />
• 1-3/4 HP, 120/240 motor<br />
• Side table board included<br />
• 30" UNIFENCE ®<br />
36-716B<br />
10" Right-Tilt Hybrid Saw w/T2-30<br />
30" Fence System<br />
MSRP. $2,199 MSRP. $3,199<br />
MSRP. $1,499<br />
www.deltaportercable.com<br />
BONUS LEVEL 2<br />
MSRP. $1,599<br />
• 1-3/4 HP, 120/240 motor<br />
• Right-tilting blade tilts away from fence<br />
• 45° and 90° bevel stops adjustable from the table top<br />
36-718<br />
MSRP. $1,599 MSRP. $1,599<br />
BONUS LEVEL 2<br />
MSRP. $1,799<br />
10” Right-Tilt Hybrid Saw w/U30 30” UNIFENCE ®<br />
• 1-3/4 HP, 120/240 motor<br />
• Side table board included<br />
• 30" UNIFENCE ®<br />
36-719<br />
BONUS LEVEL 2<br />
BONUS LEVEL 2<br />
MSRP. $1,799<br />
Dust Management<br />
2 HP Dust Collector 2100 CFM<br />
• Standard 1 micron filtration bags<br />
• Powerful TEFC induction motor<br />
• Sturdy steel base<br />
50-761<br />
Jointers<br />
8" DJ-20 Precision Jointer<br />
• Unique parallelogram support system<br />
• Cast-iron assures less vibration<br />
• Specially-designed cast-iron fence<br />
37-365X<br />
Wood Lathe<br />
12-1/2" Variable-Speed MIDI LATHE<br />
1-1/2 HP Dust Collector 1200 CFM<br />
• Standard 1 micron filtration bags<br />
• Powerful TEFC induction motor<br />
• Sturdy steel base<br />
50-760<br />
1 HP Dust Collector<br />
• 1 HP TEFC (Totally Enclosed Fan Cooled)<br />
induction motor<br />
• 2 micron pleated canister filter<br />
• Clear disposable bottom bags<br />
50-720CT<br />
BONUS LEVEL 1 BONUS LEVEL 1 BONUS LEVEL 1<br />
BONUS LEVEL 1<br />
• Powerful 1 HP Max, 1,725 RPM motor<br />
• Large 12-1/2" swing capacity provides the largest<br />
capacity in its class<br />
• Forward and Reversing function allows the turner<br />
to achieve a superior finish<br />
• Includes stand and extension<br />
46-460SE<br />
BONUS LEVEL 1<br />
MSRP. $999<br />
MSRP. $699<br />
MSRP. $549<br />
6" Professional Jointer<br />
• 1 HP, 120/240V (Wired 120V), 60 Hz,<br />
1 Phase, 3,450 RPM<br />
• 6” Cut capacity width<br />
• 1/8” Cut capacity depth<br />
37-275X<br />
BONUS LEVEL 1<br />
MSRP. $2,299 MSRP. $849<br />
NEW!<br />
MSRP. $1,199<br />
BONUS LEVEL 1<br />
BONUS LEVEL 1<br />
MSRP. $749<br />
BONUS LEVEL 1<br />
MSRP. $599<br />
www.deltaportercable.com<br />
NEW!<br />
NEW!<br />
3-Speed Ambient Air Cleaner<br />
• Highest air flow three-speed air cleaner<br />
in its class<br />
• Filters shop air faster than competition<br />
• Remote controlled<br />
50-895<br />
12-1/2" Variable-Speed MIDI LATHE<br />
• Powerful 1 HP Max, 1,725 RPM motor<br />
• Large 12-1/2" swing capacity provides the largest<br />
capacity in its class<br />
• Forward and Reversing function allows the turner<br />
to achieve a superior finish<br />
46-460<br />
12-1/2" 5-Speed MIDI LATHE<br />
• Powerful 3/4 HP Max, 1,725 RPM motor<br />
• Large 12-1/2" swing capacity<br />
• Five speed controls (500; 950; 1,550; 2,700<br />
and 4,000) reduces down time<br />
46-455<br />
MSRP. $549<br />
Tracksaws<br />
Heavy-Duty 6-1/2 (165mm) 28V Cordless TrackSaw <strong>Kit</strong> with 59" & 102" Tracks<br />
• Zero clearance TrackSaw cutting system delivers precise,<br />
straight, splinter-free cuts.<br />
• On-track cut depth: 2-1/8” (54mm) @ 90°, 1-5/8" (41mm) @ 45º;<br />
depth scale accurately indicates exact depth of cut accounting for<br />
track thickness<br />
• Continuous Anti-Kickback mechanism & riving knife prevent<br />
kickback when engaged<br />
DC351CKL<br />
MSRP. $729 MSRP. $659<br />
Heavy-Duty 6-1/2 (165mm) TrackSaw <strong>Kit</strong> with 102" Track<br />
Heavy-Duty 6-1/2 (165mm) TrackSaw <strong>Kit</strong> with 59" Track<br />
• Zero clearance TrackSaw cutting system delivers precise, straight,<br />
splinter-free cuts<br />
• On-track cut depth: 2-1/8” (54mm) @ 90°, 1-5/8" (41mm) @ 45º;<br />
depth scale accurately indicates exact depth of cut accounting for<br />
track thickness<br />
• Zero clearance TrackSaw cutting system delivers precise, straight, splinter-free cuts<br />
• For use with TrackSaw dual-edged tracks for perfectly straight cuts in both directions<br />
• On-track cut depth: 2-1/8” (54mm) @ 90°, 1-5/8" (41mm) @ 45º; depth scale accurately<br />
indicates exact depth of cut accounting for track thickness<br />
• 12A, 1300W motor effortlessly powers through hard woods<br />
up to 2-1/8" thick<br />
DWS520SK<br />
DWS520LK<br />
Compressor<br />
Heavy-Duty 200 PSI 15 Gallon 120 Volt Electric Wheeled<br />
Portable Workshop Compressor<br />
• 5.4 SCFM @ 90 PSI allows for quick compressor recovery times<br />
• 200 PSI max tank storage pressure allows for longer air tool run times<br />
• 78 dBA (tested per ISO3744) operational noise level for a quieter<br />
work environment<br />
D55168<br />
Heavy-Duty Plate Joiner <strong>Kit</strong><br />
• 6.5 Amp, 10,000 rpm motor provides power for working in the hardest woods<br />
• Dual rack and pinion fence ensures blade and fence are always parallel<br />
for accurate joints every time<br />
• Integral one-piece fence is adjustable and tilts 0-90°<br />
DW682K<br />
MSRP. $529<br />
MSRP. $249<br />
Heavy-Duty 6-1/2 (165mm) TrackSaw <strong>Kit</strong> with 59" & 102" Track<br />
• Zero clearance TrackSaw cutting system delivers precise, straight, splinter-free cuts<br />
• For use with TrackSaw dual-edged tracks for perfectly straight cuts in both directions<br />
• On-track cut depth: 2-1/8” (54mm) @ 90¡, 1-5/8" (41mm) @ 45¡; depth scale<br />
accuratly indicates exact depth of cut accounting for track thickness<br />
• 12A, 1300W motor effortlessly powers through hard<br />
woods up to 2-1/8" thick<br />
Heavy-Duty 200 PSI 15 Gallon 120 Volt Electric Wheeled Portable<br />
Workshop Compressor<br />
• 200 PSI max pressure allows for longer air tool run time<br />
• 4.8 SCFM @ 90 PSI allows for quick compressor recovery time<br />
• 78 dBA (tested per ISO3744) operational noise level for a quieter<br />
work environment<br />
D55167<br />
MSRP. $529<br />
Heavy-Duty Compact Router <strong>Kit</strong><br />
• 30,000 RPM, 5.6 amp motor provides the power and durability<br />
required to cut in various materials<br />
• Perfect for most trimming, small edge forming and hinge<br />
routing applications<br />
• Ergonomics allow for comfortable and assured, single handed control<br />
D26670K<br />
DWS520CK<br />
MSRP. $769<br />
Heavy-Duty 6-1/2 (165mm) 28V Cordless TrackSaw <strong>Kit</strong> with 102" Track<br />
• Zero clearance TrackSaw cutting system delivers precise, straight, splinter-free cuts<br />
• On-track cut depth: 2-1/8” (54mm) @ 90°, 1-5/8" (41m) @ 45º;<br />
depth scale accurately indicates exact depth of cut accounting for track thickness<br />
DC351LKL<br />
MSRP. $1,159<br />
MSRP. $1,349 MSRP. $1,199<br />
Joiner Router<br />
Heavy-Duty 1 Gallon, 135 PSI Max, Trim Compressor<br />
•.75 SCFM delivered @ 90 PSI pump, 1.0 gallon tank and 135 max PSI<br />
enables more nails to be fired and provides quicker recovery<br />
• Durable oil free pump provides extended maintenance-free operation<br />
• Low 71 dBA* allows for quieter operation (*Tested per ISO3744)<br />
D55140-WK<br />
MSRP. $179<br />
Heavy-Duty 1-3/4 HP (maximum motor HP) Fixed Base Router<br />
• 1-3/4 HP (maximum motor HP), 11.0 Amp motor provides the power<br />
to rout smoothly through the toughest hardwoods<br />
• Micro-fine depth adjustment ring provides precise depth<br />
adjustments in 1/64" increments and adjusts vertically<br />
for a constant switch/cordset location<br />
$ 219<br />
DW616<br />
MSRP. $249 MSRP. $199<br />
www.dewalt.com<br />
Heavy-Duty 6-1/2 (165mm) 28V Cordless<br />
TrackSaw <strong>Kit</strong> with 59" Track<br />
• Zero clearance TrackSaw cutting system delivers<br />
precise, straight, splinter-free cuts<br />
• On-track cut depth: 2-1/8” (54mm) @ 90¡,<br />
1-5/8" (41mm) @ 45¡; depth scale accuratly<br />
indicates exact depth of cut accounting for track<br />
thickness<br />
• 28V cordless system delivers the same cut quality<br />
and accuracy of a corded TrackSaw. Cuts over<br />
150' (46 m) of 5/8" (16 mm) plywood on a single<br />
charge<br />
DC351SKL