Download Manual - Janome

content.janome.com

Download Manual - Janome

v

x

v

z

b

n

m

e

r

x

u

c

b

n

m

w

c r

y

i

z

o

t

q

13

Threading the Machine

Press the needle up/down button to raise the take-up lever

to the highest position.

Press the lockout key to lockout the machine. Raise the

presser foot.

q Lockout key

Pass the thread in order from z to m.

z Hold the thread with both hands and pass the thread

into the guide slot.

w Guide slot

x Hold the thread with both hands and draw the thread

around the corner of the guide.

Firmly pull the thread toward you along the right

channel until the thread snaps.

e Corner of the guide

r Right channel

c Draw the thread down along the right channel and

around the bottom of the thread guide plate.

Pull the thread up along the left channel.

r Right channel

t Thread guide plate

y Left channel

v While holding the thread at the spool, firmly draw the

thread up and to the back of the take-up lever. Draw

the thread forward to draw it into the eye of the take-up

lever.

u Eye of the take-up lever

b Then pull the thread down along the left channel

and through the lower thread guide.

i Lower thread guide

n Slide the thread behind the needle bar thread guide

from the left.

o Needle bar thread guide

m Thread the needle with the needle threader (refer to

the next page).