Download Manual - Janome

content.janome.com

Download Manual - Janome

q

33

Manual Stitch Settings

When you press the adjust key, the screen shows

the manual setting window.

q Adjust key

You can alter the stitch width (or needle drop

position of the straight stitches), stitch length and

needle thread tension.

Press the “+” or “–” key beside the setting you

wish to change.

Altering needle drop position (straight

stitches)

Press the “+” key to move the needle drop

position to the right.

Press the “–” key to move the needle drop

position to the left.

Altering stitch width

Press the “+” key to increase the stitch width.

Press the “–” key to decrease the stitch width.

NOTE:

The adjustable range of patterns U6, U7, U9,

U10 and U11 is 0.0 to 7.0.

Altering stitch length

Press the “+” key to increase the stitch length.

Press the “–” key to decrease the stitch length.

More magazines by this user
Similar magazines