Champion Shooters Supply Catalog 2011-2012

DWG-C Wind Gauge with soft case 99.00
Freeland Scope Stand Wind Gauge Mount
Our new 5/8” stand mount allows you to place your
wind speed and/or wind direction gauge directly on your
scope stand. The mounting arm is adjustable in/out, can
be angled up/down and can be rotated on its axis. The
adjustable arm makes it possible to position the gauges
in a location that is easily seen while shooting. Our new
ultra sensitive wind direction indicator will pick up even
faintest breezes. It uses a standard 1/4 x 20 mounting
system so it is very easy to mount just about anywhere
there is a ¼” hole.
SSA-GMA Gauge Mount Arm for 5/8” Rod 15.00
DWG-WDI 1/4x20 Wind Direction Indicator 25.00
Ready to go 5/8” Stand Kit Options
DWG-K1
Windtronics 2 digital wind
109.00
gauge & 5/8” mounting arm
DWG-K2
Directional wind indicator with
34.00
DWG-K3
Windtronics 2 Digital Wind Gauge
This device delivers a fast, accurate and
easy to read wind speed. It can be hand
held or you can use its standard camera
mount for stationary use. It can even be
used in the rain. By a simple push of a
button you may select one of the following
units: KM/H, KTS, M/S, or MPH.
NEW!
mounting arm
Ultra Sensitive
Wind Indicator
Windtronics 2 digital wind
gauge, Indicator & mount arm
1/4x20
Mount
5/8” Wind Gauge
Stand Mount
129.00
Digital Wind Indicator Stand
This device delivers a fast, accurate and
easy to read wind speed and direction. It
uses the Windtronics 2 multi-directional
wind gauge and a precision wind
direction indicator. The wind indicator
moves but the digital display is stationary
allowing you get all the information you
need. Unit comes with a heavy duty
protective case and leveling base.
CSS-DWI Digital Wind Indicator 195.00
36
CSS-WM Shooters Deluxe Windmill 149.95
Case Master measures case neck
concentricity, case neck
thickness, case length and bullet
runout, all important to
accuracy.
The .22 LR rim thickness gauges
can be used with the case master
or any dial indicator/caliper.
GAU-CM RCBS Case Master 95.00
GAU-22R .22 LR Rim Thickness Gauge 5.95
Digital Caliper
Comes with
carry case.
Shooters Deluxe Windmill
This is the best windmill ever made.
Below are some of the improvements:
tripod base - works much better on
grass, level bubble on the base for a
more accurate reading, extremely
sensitive internal bearings, an elevated
and adjustable pointer (closer to eye
level), and a heavy duty protective
carry case.
Accuracy 0.001 inch
GAU-DC-6 6” Stainless Steel Digital Caliper 29.95
Sinclair is now cutting the caliber
holes with actual rifle throating
reamers. This means a better fit on
the bullet when you are measuring,
and a more accurate measurement
since the comparator duplicates the
throat of the rifle.
Sinclair Bullet Comparator, 6 Caliber:
09-600 224, 6mm, 257, 6.5mm, 7mm, 308 17.50
09-700 172, .204, .224, .270, .308, and .338 17.50
Sinclair M-16 / AR-15 Link
The Link separates the upper and lower
assemblies, but holds them securely
allowing easy breech access for your
rod guide. Made of Delrin and
stainless steel, it is virtually impervious
to solvents. The Link uses the rear
locking pin and rear locking pin hole
and installs in seconds.
CLA-AR-L Sinclair M-16/AR-15 Link 14.95
RIG PRODUCTS
RIG-UG1 Universal Gun Grease 1.5oz tube 3.50
RIG-UG3 Universal Gun Grease 3 oz 5.50
RIG-UG12 Universal Gun Grease 12 oz 10.50
RIG-RAG RIG Sheepskin Rag 7.25