S.L. Hardwoods - Decorative Veneered MDF S.L. Hardwoods - Shelf ...

S.L. Hardwoods - Shelf Supports / Rustin’s
40
Concealed shelf support with screw mounting plate
• For concealed mounting of shelves.
• For installation into woodwork or masonry walls.
• With screw mounting plate.
• For 24mm shelf thickness
• Fitting comprises: 1 galvanized steel supporting pin
with mounting plate, 1 pre-moulded plastic sleeve and 2
adjusting screws for inclination adjustment.
• Supporting pin with knurled section installed in a Ø
12mm hole in the shelf, the pin may be exposed or
concealed depending on the thickness of the shelf.
• Height adjustable via slots.
• Inclination adjustment using adjusting screws which
pres on the rear plate when turned in.
• Lateral adjustment by lifting the supporting pin; can
be adjusted to the right or left.
Maximum of 700mm distance between the shelf supports.
Item Code: 283.33.904 Price: £9.99 per pair
WOOD FINISHES FLOOR CARE
Button Polish
250ml ............................ £3.40
500ml ............................ £5.95
1ltr ................................. £11.31
Exterior Varnish - Clear Gloss or Satin
(water based, quick drying)
250ml............................. £4.25
500ml ............................ £7.65
1ltr ................................. £12.76
Exterior Woodstain - Satin
(water based, quick drying
250ml ............................ £3.74
500ml ............................ £6.37
1ltr ................................. £10.20
French Polish
250ml ............................ £3.23
500ml ............................ £5.61
Friction Polish
500ml ............................
£6.80
Garden Furniture Oil
500ml ............................ £5.69
1ltr ................................. £9.78
Teak Oil
250ml ............................ £2.80
500ml ............................ £4.50
1ltr ................................. £8.42
White Polish
1ltr ................................. £13.61
Acrylic Floor Coating - Satin
2.5ltr .................................. £28.08
5ltr ..................................... £52.77
Clear Plastic Floor Coating - Satin
1ltr pack ............................. £17.86
4ltr pack ............................. £51.06
WOOD PREPARATION
Grain Filler
230gm ............................... £2.37
Colours: Natural, Oak, Mahogany & Teak
Knotting BSS 1336
125ml ................................
Linseed Oil, Raw
250ml ................................
500ml ................................
Linseed Oil, Boiled
250ml ................................
500ml ................................
MDF Sealer (Clear) - Quick Drying
250ml ................................ £2.29
500ml ................................ £4.08
1ltr ..................................... £7.48
Renovators
Finish Reviver 250ml ............ £3.40
Surface Cleaner 250ml ........ £3.40
Steel Wool - Boxed Wools
Grade 000 Super Fine .........
£2.37
£2.20
£3.40
£2.54
£3.91
£2.29
Strypit Pain & Varnish Stripper
500ml .............................. £4.25
1ltr ................................... £7.48
Wood Dye
250ml .............................. £3.65
Supplied in: Pine, Light, Medium & Dark
Oak, Walnut, Ebony, Red & Brown
Mahogany, Light Teak, Dark Teak, Antique
Pine.
Woodstopping. Exterior White
260gm ............................. £3.40
Woodstopping
320gm .............................
SUNDRIES
Cellulose Thinner
250ml .............................. £2.97
500ml .............................. £5.19
1ltr ................................... £8.50
Methylated Spirits
250ml ..............................
500ml ..............................
Turpentine Pure
250ml ..............................
500ml ..............................
info@slhardwoods.co.uk www.slhardwoods.co.uk
£2.80
£1.61
£2.37
£1.69
£2.97
Decorative Veneers on Moisture-Resistant MDF
£
6mm
19mm
£
6mm
19mm
Birdseye Maple
/ Maple bal
1-249 250+
150.00 140.28
154.00 145.94
Rosewood /
Sapele bal
1-249 250+
93.08 83.77
115.04 103.63
Cherry
A/B
1-249 250+
46.09 39.20
63.04 53.58
Teak /
Brown bal
1-249 250+
64.80 58.32
72.66 63.40
Walnut
A/B
1-249 250+
51.57 46.41
67.60 61.84
Iroko
A/B
1-249 250+
55.91 47.52
69.80 62.82
To meet the trend for using real wood veneers in bathrooms
and other moist environment, SL Hardwood
have developed an exciting, new product range-
Decorative real wood veneers on Moisture Resistant
6mm & 18mm MDf (sheet size 2440 x 1220mm).
Whether for:
• Bath panels
• Vanity Units
• Wall panelling (but not in shower cubicles)
• Panelling to cisterns & pipework
Specify veneerd, moisture-resistant MDF from SL
Hardwoods with complete confidence and relax in a
beautiful bathroom.
To complement the range, we can also offer:
• Real wood veneer iron-on edging strips (for application
on site)
• A full cut-to-size and edge-lipping service
• Other veneers on a special order basis
• Solid hardwood framing & mouldings to
match veneers.
Wenge
2 Sides A/B
1-249 250+
108.74 92.43
120.00 108.00
Pippy Oak /
Oak balancer
1-249 250+
53.98 47.38
68.90 58.60
Wenge /
Balancer
1-249 250+
81.04 70.38
94.60 86.14
Please note prices are exclusive of delivery and VAT
Red Elm
A/B
1-249 250+
59.29 50.40
75.93 66.54
Zebrano
A/B
1-249 250+
97.04 82.49
111.60 99.98
Tel No: 0845 004 8912 technical advice & info 020 8683 0292 41
S.L. Hardwoods - Decorative Veneered MDF

S.L. Hardwoods - Crown Tools
42
Carpentry Tools
CODE DESCRIPTION PRICE
CR101 305mm MITRE BLOC £4.08
CR103 305mm MITRE BOX £4.97
CR101 305mm MITRE BLOCK £4.24
CR103A 305mm MITRE BOX £5.54
CR102M MINI MITRE BOX £3.34
CR104 CARVERS MALLET £14.19
CR105M MINI BEECH MALLET £3.83
CR105 102mm MALLET £4.24
CR106 114mm MALLET £4.97
CR107 127mm MALLET £6.11
CR108 152mm MALLET £7.50
CR109 WOOD FLOAT £4.97
CR110 BRADAWL £1.96
CR110A PINNED BRADAWL £2.04
CR110P POINTED BRADAWL £2.04
CR110S SQUARE BRADAWL £2.77
CR110SR R/WOOD H BRADAWL £5.38
CR110XW RAMPIN BRADAWL £5.79
CR111 GIMLET £2.36
CR112 R/H MARKING KNIFE £2.93
CR112A L/H MARKING KNIFE £2.93
CR114 127mm SCRATCH AWL £4.40
CR114R 127mm SCRATCH AWL R/W £5.54
CR114RX 37mm ROUND AWL £4.65
CR115M MINI BEVEL £4.81
CR115 190mm R/W BEVEL W/ NUT £6.69
CR116 229mm R/W BEVEL W/ NUT £7.17
CR117 267mm R/W BEVEL W/ NUT £8.48
CR115A 190mm R/W BEVEL LEVER £7.58
CR116A 229mm R/W BEVEL LEVER £8.23
CR117A 267mm R/W BEVEL LEVER £9.54
CR115B 190mm BEECH BEVEL W/NUT £4.40
CR116B 229mm BEECH BEVEL W/NUT £5.14
CR117B 267mm BEECH BEVEL W/NUT £5.30
CR116XW 229mm R/W BEVEL BR BLADE £15.25
CR120 152mm TRY SQUARE £3.99
CR121 229mm TRY SQUARE £4.57
CR122 305mm TRY SQUARE £5.63
CR123 75mm MINI TRY SQUARE £5.46
CR124 100mm MINI TRY SQUARE £5.71
CR125 152mm TRY SQUARE £6.44
CR126 229mm TRY SQUARE £7.74
CR127 305mm TRY SQUARE £9.70
CR128W MULTI-ANGLE SQUARE £19.48
CR1236M DOVETAIL SQUARE 1.6 £6.28
CR1238M DOVETAIL SQUARE 1.8 £6.28
CR130 150mm TRY/MITRE SQUARE £6.85
CR131 229mm TRY/MITRE SQUARE £8.89
CR132 305mm TRY/MITRE SQUARE £11.33
Carpentry Tools
CODE DESCRIPTION PRICE
CR133M MINI R/W TRY/MITRE SQUARE £6.28
CR134 254mm MITRE SQUARE £13.61
CR135 BEECH MARKING GAUGE £3.02
CR136 BEECH MARKING GAUGE P/H £3.91
CR137 BEECH MAR/GAUGE P/H/R/H £4.73
CR138 R/WOOD MARKING GAUGE £9.13
CR138M MINI R/W MARKING GAUGE £4.16
CR140 BEECH CUTTING GAUGE £4.73
CR141 BEECH CUTTING GAUGE P/H £5.87
CR142 BEECH CUT/GAUGE P/H/R/H £6.77
CR143 R/W CUTTING GAUGE P/H&S £10.68
CR143M MINI R/W CUTTING GAUGE £5.63
CR150 BEECH MORT/MARK GAUGE £6.52
CR151 BEECH M/M GAUGE B/P/H £8.07
CR152 ROSE MORT/MARK GAUGE £10.11
CR140 BEECH CUTTING GAUGE £4.73
CR141 BEECH CUTTING GAUGE P/H £5.87
CR142 BEECH CUT/GAUGE P/H/R/H £6.77
CR143 R/W CUTTING GAUGE P/H&S £10.68
CR143M MINI R/W CUTTING GAUGE £5.63
CR150 BEECH MORT/MARK GAUGE £6.52
CR152 ROSE MORT/MARK GAUGE £10.11
CR153 R/WOOD M/M GAUGE P/H £11.82
CR154 R/WOOD M/M GAUGE SCREW £19.89
CR152M MINI R/WOOD MORT GAUGE £6.36
CRMINSET/1 MINI TOOL SET .4PC £27.64
CR155 BENCH HOOK £4.73
CR156 OILSTONE BOX £4.73
CR169RAW 3mm BEVEL CHISEL £5.94
CR170RW 6mm BEVEL CHISEL £6.11
CR170RAW 10mm BEVEL CHISEL £6.11
CR171RW 13mm BEVEL CHISEL £6.44
CR171RAW 16mm BEVEL CHISEL £7.01
CR172RW 19mm BEVEL CHISEL £7.01
CR172RAW 22mm BEVEL CHISEL £7.34
CR173RW 25mm BEVEL CHISEL £7.34
CR173RAW 32mm BEVEL CHISEL £8.07
CR173RBW 38mm BEVEL CHISEL £9.70
CR174R 4pc CHISEL SET(DISPLAY BOX) £30.74
CR175R 4pc CHISEL SET WOOD BOX £43.53
CR175RX 10pc CHISEL SET WOOD BOX £90.00
CR174RB1W 6mm BUTT CHISEL £6.93
CR174RB2W 10mm BUTT CHISEL £7.01
CR174RB3W 12mm BUTT CHISEL £7.01
CR174RB4W 16mm BUTT CHISEL £7.09
CR174RB5W 19mm BUTT CHISEL £7.09
CR174RB6W 22mm BUTT CHISEL £7.50
CR174RB7W 25mm BUTT CHISEL £7.50
CR174RB 4pc CHISEL SET £30.16
CR174RBW 4pc CHISEL SET WOOD BOX £39.70
CR174RBX 7pc CHISEL SET £55.76
CR174RBXW 7pc CHISEL SET WOOD BOX £68.81
CR175RC 76mm X 6mm CORNER CHISEL £7.66
CR175CC 10mm CORNER CUT CHISEL £21.20
CR1741SK 13mm L/R/H SKEW CHISEL £15.00
CR1742SK 19mm L/R/H SKEW CHISEL £18.10
CR1743SK 25mm L/R/H SKEW CHISEL £19.08
CR1761 6mm REG MORTICE CHISEL £11.98
CR1762 8mm REG MORTICE CHISEL £11.98
CR1763 10mm REG MORTICE CHISEL £11.98
CR1764 13mm REG MORTICE CHISEL £11.98
CR1765 16mm REG MORTICE CHISEL £14.19
CR1766 19mm REG MORTICE CHISEL £14.19
CR1767 22mm REG MORTICE CHISEL £16.31
CR1768 25mm REG MORTICE CHISEL £16.31
info@slhardwoods.co.uk www.slhardwoods.co.uk
Carpentry Tools
CODE DESCRIPTION PRICE
CR1769 32mm REG MORTICE CHISEL £17.45
CR1770 38mm REG MORTICE CHISEL £18.42
CR1771 51mm REG MORTICE CHISEL £20.06
CR176PW 6mm PARING CHISEL £14.67
CR177PW 13mm PARING CHISEL £15.57
CR178PW 19mm PARING CHISEL £16.14
CR179PW 25mm PARING CHISEL £17.69
CR180PW 32mm PARING CHISEL £19.08
CR176PWC 6mm CRANKED PAR/CHISEL £17.85
CR177PWC 13mm CRANKED PAR/CHISEL £18.59
CR178PWC 19mm CRANKED PAR/CHISEL £19.57
CR179PWC 25mm CRANKED PAR/CHISEL £23.07
CR179PWS 4pc CHISEL SET £79.81
CR180 76mm CABINET S/DRIVER £4.57
CR181 102mm CABINET S/DRIVER £4.73
CR182 127mm CABINET S/DRIVER £5.63
CR183 152mm CABINET S/DRIVER £5.71
CR184 203mm CABINET S/DRIVER £7.50
CR185 254mm CABINET S/DRIVER £9.86
CR185 6PC CABINET SCREWDRIVER SET £36.36
CRMPBW MINI BLOCK PLANE £11.90
CRMPBNW MINI BULL-NOSED PLANE £14.84
CRMPSW MINI SCRAPER PLANE £14.84
CRDK DRAW KNIFE £26.82
CRDKB BENT DRAW KNIFE £28.04
CRPHW PLANE HANDLE SET £13.04
Sundry Items
CODE DESCRIPTION PRICE
CR375 CABINET SCRAPER 5” X2.1/2” £1.58
CR376 SET OF 3 CABINET SCRAPER £4.73
CR377W BURNISHER R/W HANDLE £5.54
CR4900 102mm CENTER PUNCH £2.69
CR4901 127mm CENTER PUNCH £2.93
CR4902 152mm CENTER PUNCH £3.51
CR4903 203mm CENTER PUNCH £4.24
Saws
CODE DESCRIPTION PRICE
CR187M 102mm MINI GENTS SAW £6.20
CR186A 152mm GENTS SAW £6.20
CR186 152mm GENTS SAW R/W £6.52
CR187 203mm GENTS SAW £7.09
CR187L 254mm GENTS SAW £7.50
CR187RS 254mm REVERSIBLE SAW £9.29
CR187F FLUSH CUTTING SAW £5.63
CR187RSM 102mm MINI REV SAW £7.42
CR187JS 152mm MODEL MAKERS SAW £121.72
CR187V VENEER SAW £7.50
CR187VR 76mm VENEER INLAY SAW £7.91
CR188 203mm DOVETAIL SAW £25.11
CR195 305mm TENON SAW £26.25
The most technologically advanced woodturning lathe on the market...
nova dvr
• Electronic variable speed
with digital readout from
100-3500rpm
• Direct Drive - No belts to
change
• 5 pre set speeds for instant
desired speed access
• Low speed (up to
1000rpm) torque increased
100% giving even more control
when turning large or
out of balance piece
• 16” swing over bed bars
xp TM
3000
The computer operated motor monitors the speed of the drive shaft and compares that with the desired speed set on the digital
display. As a result when a large cut is taken, the motor increases the power to maintain the speed and torgue, giving a smooth and
effortless turning experience.
Accessories available: Outrigger Attachment, Stand, Bed Extension, Bed Extension Legs
• 29” outboard (using
optional outrigger)
• 24” between centres
(extendible in 20” units
with optional extension
beds)
• Increased head and bed
size for even more
vibration damping
• Soft grip handles for
comfort and ease of use
• 360 degree swivel head
• 24 set indexing
• 2hp motor
See page 39 for more information and other products by Robert Sorby...
Tel No: 0845 004 8912 technical advice & info 020 8683 0292
S.L. Hardwoods - Crown Tools / Sorby Lathe 43

S.L. Hardwoods - Crown Tools / Lime
2240 - £90.00
Woodcarving Tools
CODE
CR2221
CR2222
CR2223
CR2224
CR2225
CR2226
CR2227
CR2228
CR2229
CR2230
CR2231
CR2232
CR2233
CR2234
CR2235
CR2236
CR2237
CR2238
DESCRIPTION
No1 10mm SQUARE CHISEL
No2 3mm SKEW CHISEL
No2 10mm SKEW CHISEL
No4 6mm STRAIGHT GOUGE
No4 13mm STRAIGHT GOUGE
No4 19mm STRAIGHT GOUGE
No5 3mm STRAIGHT GOUGE
No5 6mm STRAIGHT GOUGE
No5 13mm STRAIGHT GOUGE
No6 10mm STRAIGHT GOUGE
No7 3mm STRAIGHT GOUGE
No8 19mm STRAIGHT GOUGE
No11 1.6mm VEINER GOUGE
No14 19mm BENT GOUGE
No16 10mm BENT GOUGE5
No27 10mm SPOON BIT
No39 V TOOL
No39 6mm V TOOL
Carving Tools
Woodcarving Sets
CODE DESCRIPTION PRICE
CR220 6PC CARVING SET £21.12
CR2239 6PC DISPLAY BOX £76.47
CR2240 6PC WOODEN BOX £90.00
CR2241 12PC DISPLAY BOX £145.44
CR2242 12PC WOODEN BOX £166.64
PRICE
£10.60
£10.60
£10.60
£11.17
£12.31
£13.70
£11.09
£11.09
£12.31
£11.09
£11.09
£13.70
£12.31
£15.25
£15.25
£12.31
£12.88
£12.88
Selected, Kiln-dried Lime (Tilia Vulgaris) The traditional carvers timber.
L
550
550
450
300
300
550
550
450
300
300
550
550
450
300
300
no.2 skew chisel
2241 - £145.44
no.4 no.5 no.6 no.7 no.8
no.11 veiner gouge
no.14 no.16
no.10 spoon bit
no.39 v tool
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
no.1 square chisel
W
400
200
300
200
150
400
200
300
200
150
400
200
300
200
150
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
THICKNESS
150
150
150
150
150
100
100
100
100
100
75
75
75
75
75
PRICE
£109.55
£54.78
£67.22
£29.88
£22.41
£73.03
£36.52
£44.52
£19.92
£14.93
£54.78
£27.39
£33.62
£14.93
£11.21
Capitals, Corbels, Columns and Rosettes
hc224 Lime HC Corbel
305 x 95 x 210mm
£40.00
hc151 Beech PF Rosette
98 x 91 x 15mm
£11.25
Sold in pairs only
hc156 Beech PF Corbel
140 x 140 x 35mm
£24.30
Sold in pairs only
c46 Beech PF Capital
83 x 150 x 25mm
£19.50
Sold in pairs only
hc03 Lime HC Capital
70 x 170 x 58mm
£9.00
Sold in pairs only
hc229 Lime HC Corbel
305 x 95 x 210mm
£25.65
hc157 Beech PF Corbel
70 x 68 x 23mm
£13.00
Sold in pairs only
hc20 Lime HC Corbel
305 x95 x 210mm
£52.00
hc150 Beech PF Rosette
93 x 82 x 16mm
£10.00
Sold in pairs only
hc241 Lime HC Column
1100 x 235 x 176mm
£150.00
c545 Beech PF Corbel
256 x 131 x 143mm £36.00
hc242 Lime HC Column
1100 x 235 x 215mm
£300.00
hc223 Lime HC Corbel
305 x180 x 155mm £100.00
c532
Beech PF Corbel
180 x 60 x 45mm
£19.60
Beech PF Rosette
c530
Beech PF Corbel
210 x 120 x 75mm
£29.80
c84 90mm dia x 6mm £12.00
c85 70mm dia x 11mm £11.90
c86 54mm dia x 11mm £10.00
Sold in pairs only
c535 Beech HC Corbel
170 x 88 x 95mm £22.00
hc243 Lime HC Column
1100 x 125 x 205mm
£160.00
Mail Order Only All items are priced each and subject to VAT Carriage Charges Apply
44 info@slhardwoods.co.uk www.slhardwoods.co.uk
Tel No: 0845 004 8912 technical advice & info 020 8683 0292
45
S.L. Hardwoods - Capitals & Corbels

S.L. Hardwoods - Turning Blanks
46
Turning Blanks
MUHUHU ENGLISH YEW FIGURED MYRTLE
AMERICAN WHITE ASH BLACKWOOD SANDELWOOD
BOXWOOD LOG BUBINGA AMERICAN CHERRY
EBONY SQUARES EUCALYPT MARBLE KINGWOOD (Dalergia caerensis)
LIGNUM VITAE AMERICAN WHITE OAK OLIVEWOOD
SATINWOOD TAMBOOTIE THUYA BURR
MALEE SLICES TULIPWOOD (South American) WENGE TURNING BLANKS
TEA TREE GOLD FIELD BURR (front & back) SATOBA
SASSAFRAS MUSK MAPLE
SAPELE
MGURURE GREVILLEA
Please ring for size availability and prices
info@slhardwoods.co.uk www.slhardwoods.co.uk
Ref
NDVR3000
NBTA
N3000S
NBU3000
N3000SEL
Precision Mini /
Light-pull Drive
Description
DVR XP Lathe
Outrigger Attachment
Stand
Bed Extension
Bed Extension Legs
The precision Mini / Light-pull drive
has a serrated teeth head for a very
positive drive. The head is 5/16” in
diameter, ideal togive a precise
friction fit when making light pulls.
The addition of the relief behind the
head allows for extra access
without the danger of damage
to the tools.
PMD081 1MT £21.06
PMD082 2MT £21.06
Drive & Revolving Centres
Revolving Centre Boxed Sets comprise
high quality revolving centre
and seven popular acessories in a
sturdy fitted storage box
DRCK/1 1MT £44.68
DRCK/2 2MT £44.68
Lazy Susan Bearings
LZ4 - £2.25
LZ6 - £3.75
Robert Sorby Lathes
DVR XP Woodturning Lathe
Price
£1357.45
£148.94
£93.62
£114.89
£38.30
The computer operated motor monitors the speed of the drive shaft and
compares that with the desired speed set on the digital display. As a result
when a large cut is taken, the motor increases the power to maintain the
speed and torgue, giving a smooth and effortless turning experience.
The most technologically advanced woodturning lathe on the market.
Ref
765/S
766/4
766/6
766/9
767
767E
768
• Electronic variable speed with digital readout from
100-3500rpm
• Direct Drive - No belts to change
• 2hp motor
• 5 pre set speeds for instant desired speed access
• Low speed (up to 1000rpm) torque increased 100%
giving even more control when turning large or out of
balance piece
• 16” swing over bed bars
• 29” outboard (using optional outrigger)
• 24” between centres (extendible in 20” units with
optional extension beds)
• Increased head and bed size for even more
vibration damping
• Soft grip handles for comfort and ease of use
• 360 degree swivel head
• 24 set indexing
Supernova2 Chuck
The supernova 2 has one of the most powerful grips around, compact
and lightweight and comes with a 2 year garuntee.
Thread Sizes- 3/4” x 16, 1” x 8, 1” x 12, 25 x 2mm, 20 x 1.5mm, 30 x
3.5mm, 1 1/4” x 8, 1” x 10, 5/8” plain bore. 1 1/2” x 6 (dual thread), 33 x
3.5mm, 1 1/8” x 12, 3/4” x 10, 1” x 10 left hand, 7/8” x 12 left hand.
SNSZ Supernova2 Chuck (Please specifiy thread size) £119.15
Lathe Accessories - The Modular Tool Rest System
Most turners have problems with their lathe tool rest. The majority are either cast or made
from low grade steel and tend to be relatively soft. As a result, when a square tool, like a
parting tool, is used it can dig into the rest creating a series of notches. The Cross bards
from the new Modular Tool Rest System are made from hardened steel, greatly reducing this
problem and therefore enhancing the ease and enjoyment of the turner.
Description
Stem
4” Crossbar
6” Crossbar
9” Crossbar
9” Internal Bowl Crossbar
9” External Bowl Crossbar
Box Scraper Platform
RCSTB100 7/8” X 1mt Revolving £31.28
RCSTB200 7/8” X 2mt Revolving £31.28
STBCHUCK 7/8” Steb Drive £26.81
STB150 1/2” X 1mt Original £26.81
STB100 7/8” X 1mt Original £26.81
STB250 1/2” X 2mt Original £26.81
STB200 7/8” X 2mt Original £26.81
Stubcentres
Price
£4.47
£9.79
£11.49
£13.19
£14.43
£14.43
£5.91
Tel No: 0845 004 8912 technical advice & info 020 8683 0292 47
S.L. Hardwoods - Robert Sorby Lathes

S.L. Hardwoods - Robert Sorby Tools
48
Specialist Turning Tools
830SH Slim Parting Tool
£13.40
821H 3/4” Hardwood Scraper Handled
£26.34
813H 1/4” Round Skew Chisel Handled
£14.68
813H 3/8” Round Skew Chisel Handled
£15.95
813H 1/2” Round Skew Chisel Handled
£18.68
812H 3/4” Spindlemaster Handled
£25.48
879H 1/2” Micro Spindlemaster Handled
£15.74
973 Thread & Sizing Gauge
£19.53
895H Relief Cutting Tool
£16.80
983H Tool Support
£16.80
890H Pair 16pi Handled
£34.68
Dimensioning
974 4” Double-Edged Callipers
£9.57
977 7” Double Ended
£13.82
9785 8½” Inside / Ouside
£16.12
Sandmaster
Allows sanding and polishing of
work piece whilst still on the lathe.
Multi-position 2” velcro pad. Also
takes otional 3” velcro pad.
Complete with 2 discs of each of 5
grits: 60, 120, 180, 240 & 400.
Woodworking Chisels
Traditional Bevel Edge Chisels
166 - Boxwood Carving
Handled
Traditional carving handle with
parelles brass ferule Fitted with
parallel leather washer. Size 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1¼” 1½” 2” Set 3 Set 5
£21.23 £15.53 £15.74 £16.38 £17.65 £19.36 £26.59 £29.57 £36.38 £83.82
167 - Octagonal Boxwood
Handled
Considered tobe the ultimate in
handle design. Double hoops in
solid brass for extra handle strength.
Gilt Edge Chisels
520 - Rosewood Handled
Beautiful in every way. Without
doubt one of the finest bevel
edged chisels in the world.
Aesthetic and functional, with
excellent blance.
Robert Sorby Tools
410 Sandmaster £27.19
Multi-Tip Hollowing Tool
A most versitile hollowing tool.
Ideal for end and side grain. Will
under-cut rims. Includes scraper
blade for half round, shallow
and flat work as well as sheer
scraping.
RS200KT Multi-Tip Hollowing Tool £44.21
Midi Multi-Tip Hollowing Tool
All the benefits of the full size
Multi-tipped Hollwing tool but
2/3 the size, giving access
through a much smaller aperture
when turning fine hollow forms.
Comes with 3 cutters.
RS100KT Midi Multi-Tip Hollowing Tool £35.31
Hollowmaster
Swan neck design for hollowing
through limited access. 3/4” flat
shank, unique to Robert Sorby,
gived increased stability.
Complete with scraper cutter,
round-end swivel cutter.
RS230KT Hollowmaster £37.40
Midi Hollowmaster
Downsized from the original
Hollowmaster this version has a
1/2” shank with a flat underside
and can reach up to 6” inside a
vessel for hollowing. Comes with
2 cutters.
RS130KT Midi Hollowmaster £31.06
Size 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1¼” 1½” 2” Set 3 Set 5
£23.78 £18.29 £18.51 £19.14 £20.21 £22.55 £29.36 £32.97 £39.57 £98.51
Size 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1¼” 1½” 2” Set 3 Set 5
£23.61 £19.53 £20.00 £20.85 £22.55 £23.61 £66.51 £106.38
info@slhardwoods.co.uk www.slhardwoods.co.uk
Beginners Turning Tool Set
(6 Peice Set)
The ultimate full size all round
woodturning set. Perfect for the
beginner for any type of turning.
Contains-
3/4“ Roughing Gouge
1/4” Parting Tool
3/8” Bowl Gouge
3/8” Spindle Gouge
3/4” Oval Skew
1/2” Round Nose Scraper
67HS Turning Tool Set £99.00
Texturing Tool
Enchances turned peices by
producing a myriad of different
textures. It can also be used to
creste unigue effects that alter
the tactile and visual qualities of
your bowls, hollow forms,
goblets or boxes.
310H Texturing Tool incl Cutter £44.46
Spiralling System
The Spiralling System is used to create
both left and right handed spirals with
ease. It features an innovative rest with
indexed reference positions, which
enable the replication of the spirals.
Contains-
Texturer Cutter
Cutter 2m Pitch
Cutter 4mm Pitch
Cutter 6mm Pitch
330H Spirralling & Texturing System £102.93
Chatter Tool
Creates an infinite variety of
decoration of endgrain by altering
cutter, cutter length, lathe speed or
position of tool rest. The Chattertool
Kit contains the Chattertool with the
two cutters and a shear scraper cutter.
RS216 KT Chatter Tool & Shear Scraper Tool £37.87
Deluxe Universal Sharpening
System. Incorporates all the features
of both the Fingernail
Profiler and the Universal
Sharpening system. Changes
from fingernail profiling to standard
use in seconds.
447 Deluxe Universal Sharperner £68.04
Woodcarvers Clamp
A unique design allows for
multi direction access with
positive position locking. an
extremely solid design for all
types of carving.
R400 Woodcarver’s Clamp £75.00
Bowl Gouges
Standard Size Ref Length Handled Blade Only
1/4” 842LH 23” £24.04 £16.13
3/8” 842LH 23” £29.36 £21.70
1/2” 842LH 23” £36.55 £28.89
Fingernail Size Ref Length Handled Blade Only
Tel No: 0845 004 8912 technical advice & info 020 8683 0292 49
1/4”
3/8”
1/2”
842FLH 23”
842FLH 23”
842FLH 23”
£24.04
£29.36
£36.55
£16.13
£21.70
£28.89
Spindle Gouges
Standard Size Ref Length Handled Blade Only
1/4”
3/8”
1/2”
840H
840H
840H
16½”
16½”
18¼”
£14.68
£16.38
£20.63
£9.79
£11.49
£15.28
Fingernail Size Ref Length Handled Blade Only
3/8”
1/2”
840FH
840FH
16½”
18¼”
£16.38
£20.63
£11.49
£15.28
Roughing-Out Gouges
Roughing-Out Size Ref Length Handled Blade Only
3/4” 843H 19” £29.36 £23.79
Skew Chisels
Oval Size Ref Length Handled Blade Only
1/2” 809H 16¼” £22.08 £16.13
3/4” 809H 16¼” £24.63 £18.68
1” 809H 18¼” £29.74 £22.95
Parting Tools
Standard Size Ref Length Handled Blade Only
1/8” 830H 13½” £19.14 £14.04
Diamond Section Size Ref Length Handled Blade Only
3/16” 831H 17” £34.85 £28.89
Beading & Parting Size Ref Length Handled Blade Only
3/8” 833H 18¾” £22.76 £15.53
Scrapers
Round Nose Size Ref Length Handled Blade Only
1/2”
3/4”
820H
820H
16”
16”
£22.08
£24.83
£16.13
£18.68
Square-End Size Ref Length Handled Blade Only
1/2”
3/4”
823H
823H
16”
16”
£22.08
£24.83
£16.13
£18.68
Curved Size Ref Length Handled Blade Only
3/4” 828H 16” £24.89 £18.68
S.L. Hardwoods - Robert Sorby Tools

S.L. Hardwoods - Planet Manufacturing
PLANET MANUFACTURING TOOLS
Carpenters Clamp - These are the most lightweight of URKO’s
range of cast iron clamps.
Size CODE PRICE
150mm UK21/150 £5.77
300mm UK21/300 £6.82
600mm UK21/600 £8.92
Heavy-Duty F-Clamp 3-P - Overall jaw depth of 138mm -
120mm to centre of jaw and up to 1000kg of clamping pressure.
Size CODE PRICE
250mm UK3P/250 £12.49
300mm UK3P/300 £13.07
400mm UK3P/400 £14.12
500mm UK3P/500 £15.48
600mm UK3P/600 £16.69
800mm UK3P/800 £18.90
1000mm UK3P/1000 £21.31
1200mm UK3P/1200 £23.57
Universal Clamp 3-V
Jaw Set 1 CODE PRICE
Nodular cast iron, UK3V/JAW £8.92
overall depth 138mm,
120mm to centre of jaw.
Extension Bars - 35mm x 8mm
section, serrated and plated.
Size CODE PRICE
200mm UK3V/200 £4.51
250mm UK3V/250 £5.09
300mm UK3V/300 £6.03
400mm UK3V/400 £7.61
500mm UK3V/500 £9.03
600mm UK3V/600 £10.39
800mm UK3V/800 £13.17
1000mm UK3V/1000 £16.06
1200mm UK3V/1200 £18.42
1500mm UK3V/1500 £21.63
Extension Block CODE PRICE
Joins two extension bars together rigidly, UK3V/EXT £13.59
very substantial construction.
URKA Sash Cramp NO.873
Size CODE PRICE
1000mm UK873/1000 £30.81
1300mm UK873/1300 £35.07
1600mm UK873/1600 £39.16
1900mm UK873/1900 £43.41
URKA Variable Mitre CODE PRICE
Clamp 70deg - 120deg UK280V £23.04
Router - Overall length (I) / height (h) x holding force
Horizontal Type CODE PRICE
70mm (I) x 27kg H25 £5.40
138mm (I) x 90kg H35 £7.61
171mm (I) x 230kg H45 £9.39
267mm (I) x 340kg H55 £14.64
330mm (I) x 630kg (extra clamp cap.) H65X £13.12
Verticle Type CODE PRICE
100mm (h) x 90kg V25 £7.45
146mm (h) x 225kg V45 £9.66
196mm (I) x 350kg V65 £13.59
Push Type CODE PRICE
138mm (I) x 135kg L15 £12.07
Eze-Lap Diamond Sharpeners - Complete with leather pouch
Size CODE PRICE
4” x 2” Superfine EZ56SF £14.64
4” x 2” Fine EZ56F £14.64
4” x 2” Medium EZ56M £17.79
4” x 2” Coarse EZ56C £20.47
Eze-Lap Diamond Sharpeners - Continued...
Size CODE PRICE
6” x 2” Superfine EZ66SF £20.73
6” x 2” Fine EZ66F £20.73
6” x 2” Medium EZ66M £26.77
6” x 2” Coarse EZ66C £31.44
8” x 2” Superfine EZ76SF £27.24
8” x 2” Fine EZ76F £27.24
8” x 2” Medium EZ76M £35.64
8” x 2” Coarse EZ76C £41.94
8” x 3” Superfine EZ86SF £38.79
8” x 3” Fine EZ86F £38.79
8” x 3” Medium EZ86M £49.87
8” x 3” Coarse EZ86C £60.03
Double-sided bench stones - Cost-saving combinations of grit
size. Supplied with non-slip mat to facilitate sharpening procedure.
Size CODE PRICE
2” x 6” F/M EZD6FM £41.73
2” x 6” SF/C EZD6SFC £41.73
6” x 2” F/M EZD8FM £62.73
6” x 2” SF/C EZD8SFC £62.73
Adjustable Stone Holder
5 1/2” - 8 1/2 “ adjustable CODE PRICE
capacity. Chromed bars SH1 £12.07
& non-sliprubber supports.
Eze-Lap Diamond Hand Laps - 6” x 3/4 “ overall. 2”x 3/4”
diamond portion. Available as singles or in sets.
Hand Laps CODE PRICE
Superfine EZLSF £4.98
Fine EZLF £5.25
Medium EZLM £6.82
Course EZLC £7.61
Extra Course EZLXC £8.92
Set of 3 (DF, F, M) EZL-3PAK £14.64
Set of 5 (SF, F, M, C, XC) EZL-5PAK £26.19
Eze-Fold Diamond Hones - The covers of this stone fold back to
create a very substantial handle. 4” x 3/4” diamond portion. Overall
length when open 9”.
Eze-Fold Diamond Hones CODE PRICE
Superfine EZ500 £14.96
Fine EZ501 £14.96
Medium EZ502 £19.16
Course EZ503 £20.73
Extra Course EZ504 £24.93
Double Sided SF/M EZ510 £27.24
Double Sided F/C EZ520 £27.24
Shaft-Type Hones
‘M’ type 3 1/4” x 1/4” round shaft. CODE PRICE
Fine grade, overall length when EZMF £16.74
open 8”.
‘S’ type 2 1/4” D-Shaped diamond CODE PRICE
section with groove. Overall length EZSF £5.19
when open 5 1/2”.
‘C’ type 3 1/2” x 2” (5.5mm) CODE PRICE
diameter round shaft with two EZCF £10.44
grooves. Fine grade diamond.
Overall length with open 7 1/2”.
Honing Guide
Chisel, plane iron etc CODE PRICE
up to 3” wide at the HG3 £4.98
correct sharpening (Box of 30)
angle whilst it is HG3/30 £130.20
being honed.
Sawtooth Forstner Bits - Long series - all sizes are a minimum of
150mm long. Suitable for all wood types including end grain boring.
Will produce over-lapping holes. Resharpenable. Clam packed for
retail display.
SIZE P/CODE PRICE
1” STC01 £5.35
1 1/16”1 1/16” STC27 £5.35
1 1/8”v STC1.18 £5.88
1 1/4” STC1.14 £6.51
1 3/8” STC1.38 £7.03
1 1/2” STC1.12 £7.71
1 5/8 STC1.58 £8.29
1 3/4” STC1.34 £8.92
1 7/8” STC1.78 £9.45
2” STC02 £10.13
2 1/4” STC2.14 £11.28
2 1/2” STC.12 £13.65
2 3/4” STC2.34 £15.17
3” STC03 £17.85
3 1/4” STC3.14 £21.00
3 1/2” STC3.12 £23.25
4” STC04 £26.51
25mm STC25 £5.35
30mm STC30 £6.51
40mm STC40 £8.29
43mm STC43 £8.92
50mm STC50 £10.13
60mm STC60 £11.28
80mm STC80 £20.05
Bench Stop CODE PRICE
Overall size 62 x 38mm BS1 £4.35
Rotating Centres CODE PRICE
Light Duty Centre 1MT LD1 £17.79
Standard Duty Centre 1MT SD1 £22.57
2MT SD2 £22.57
Heavy Duty Centre 1MT HD1 £36.22
2MT HD2 £36.22
Slim Delux Centre 1MT DX1 £29.40
2MT DX2 £32.02
Long Hole Boring CODE PRICE
Piloted Drive (Counterbore) 1MT 0141B £16.59
2MT 1042B £17.95
3MT 0143B £20.26
Hollow Centre 1MT 5161B £15.75
2MT 5162B £16.80
Drive Centres CODE PRICE
3/8” x 2-prong 1MT 3821 £12.07
3/8” x 4-prong 1MT 3841 £12.07
5/8” x 2-prong 1MT 5821 £12.07
5/8” x 4-prong 1MT 5841 £12.07
1” x 2-prong 1MT 0121 £12.54
1” x 4-prong 1MT 0141 £12.54
5/8” x 2-prong 2MT 5822 £12.60
5/8” x 4-prong 2MT 5842 £12.60
1” x 2-prong 2MT 0122 £13.12
1” x 4-prong 2MT 0142 £13.12
1 1/2” x 2-prong (Relieved) 2MT 11222(R) £23.57
1 1/2” x 4-prong (Relieved) 2MT 11242(R) £23.57
Drill Chuck Mandrels - 1/2” x 20TPI - adaptors suitable for
mounting drill chucks in lathe.
Spec CODE PRICE
Drill chuck mandrel 1MT DM1A £5.19
2MT DM2A £6.24
Depth Gauge - A traditional depth gauge incorporating an overlength
6”/150mm rule. Full 6”/150mm capacity.
Spec CODE PRICE
Depth Gauge / Single DG06 £5.19
Rotating Centre CODE PRICE
2MT Shank RTC2 £30.18
Plastic Centre Finder CODE PRICE
Plastic Centre Finder 8” Dia CF1 £3.41
Universal Pen Mandrel CODE PRICE
1MT Kit complete PM1 £16.74
2MT Kit complete PM2 £17.79
Shaft, spacers, cones and brass
clamping ring. (No MT shank)
Suitable for holding in headerstock
drill chuck etc. PM0 £11.49
SPARES
Set of 3 parallel spacers PM3S £3.15
Set of 4 cones PM4C £4.20
2 cones, 2 spacers, 1
knurled brass clamping nut. PM5X £6.30
Pen Kits 7mm Diameter
Each PKT1 £2.62
Pack of 5 PKT1/5 £8.92
Bulk Packed 100s PKT1/100
£170.10
Pen Blank Trimming Tool CODE PRICE
7mm Pens PBT1 £14.01
Plastic Pen Boxes - Elegant plastic pen boxes that add an extra
appeal to your finished pen. Suitable for displaying and storing pens
and pencils made with the above kits. Flocked interior for added prestige.
Supplied in protective cardboard sleeve.
Spec CODE PRICE
Single Box Pkt 4 PBP1/4 £2.20
Pkt 20 PBP1/20 £8.34
Pkt 100 PBP1/100 £37.80
Double Box Pkt 4 PBP2/4 £3.09
Pkt 20 PBP2/20 £11.49
Pkt 100 PBP2/100 £51.71
Larger Quantities POA
Detachable CODE PRICE
Ring Centre CR60 £5.56
Lace Bobbin CODE PRICE
Drive (Tapered) 1MT LBD1 £10.44
1/2“squared 2MT LBD2 £11.28
Halved Solid CODE PRICE
Centres 1MT HC1 £3.78
2MT HC2 £4.30
Calipers CODE PRICE
4” Inside Caliper C151/4 £4.67
6” Inside Caliper C151/6 £4.98
8” Inside Caliper C151/8 £7.08
4” Outside Caliper C052/4 £4.67
6” Outside Caliper C052/6 £4.98
8” Outside Caliper C052/8 £7.08
6” Dividers CD50/6 £2.95
Large Calipers CODE PRICE
12” Joint to Tip CO331/12 £5.19
Double Ended Calipers CODE PRICE
Double Ended Outside Capiler CDE/7 £12.07
Inside / Outside Capiler CIO/7 £12.07
Both 7” Capacity
For more information visit:
www.slhardwoods.co.uk or Tel: 020 8683 0292
50 info@slhardwoods.co.uk www.slhardwoods.co.uk
Tel No: 0845 004 8912 technical advice & info 020 8683 0292
51
S.L. Hardwoods - Planet Manufacturing

S.L. Hardwoods - Linemine Plans
52
Chisel Chest TL-05
An elegant and practical solution to
chisel and tool storage, the looks of
this small chest belie the relative simplicity
of its construction.
W- 452mm, D- 348mm, H- 346mm
PRICE £9.00
Apothecary Chest DR-01
A beautiful and compact chest of
drawers adapted from a design seen
in chemists shops a century ago, ideal
for storing smaller items.
W- 507mm, D- 407mm, H- 863mm
PRICE £9.00
Shaker Writing Desk
DK-01
This Shaker-influenced writing desk is
based on a traditional bonheur de jour
(small writing desk), and combines compact
design with generous writing area.
W- 864mm, D- 406mm, H- 906mm
PRICE £9.00
Morris Chair CH-01
A popular classic, reworked using
modern construction techniques. The
seat frame is designed to allow a supporting
webbing to be attached.
W- 864mm, D- 723mm, H- 1080mm
PRICE £9.00
Shaker Writing Chair
CH-05
Filing Cabinet OF-04
A simple and practical addition to
home or work file storage, this hardwood
filing cabinet has a much gentler
feel than its metal cousin.
W- 452mm, D- 348mm, H- 346mm
PRICE £8.00
Morris Sofa ST-01
This practical version of a classic design
employs modern jointing techniques, using
dowels and biscuits in the construction.
The seat frame is designed to allow a supporting
webbing to be attached.
L- 1500mm, D- 850mm, H- 780mm
PRICE £8.00
info@slhardwoods.co.uk www.slhardwoods.co.uk
Oak Dresser DS-02
Plenty of display space for china, with
a relatively shallow base unit only
406mm deep, gives this dresser an
extra edge in the utility stakes.
W- 1524mm, D- 406mm, H- 1803mm
PRICE £9.00
Joiners Bench TL - 03 Kitchen Trolley KN - 02 Corner Cupboard CU-01
Chest of Drawers DR-07 Wall Mounted Toolbox Coffee Table TB-21 Arbour Seat GA-12 Luytchens Bench GA-03
This elegant chest of drawers is a
companion piece to the side table,
with similar turned features and
applied mouldings to the drawers.
W- 1219mm, D- 508mm, H- 852mm
PRICE £9.00
TV Cabinet CA-02 Coffer Chest CS-01 Bedside Chest of Tall Clock CL-01
Combine traditional and modern, this Fielded panels in a solid mortice and Drawers DR-06
Another Shaker style piece, this ele-
TV cabinet has a drawer for DVDs,
speaker compartments, and a shelf for a
DVD player below the TV storage.
tenon frame, housed into section legs,
complimented by Cedar of Lebanon
removable storage trays.
Drawer height increases towards the
base, with drawers made using traditional
dovetail construction, and carcass
sides housed into top and base.
gant design has relatively few
joints. The dimensions in the upper
may case need adjusting to fit the
clock movement.
W- 507mm, D- 407mm, H- 863mm
PRICE £9.00
L- 876mm, D- 420mm, H- 428mm
PRICE £8.00
W- 460mm, D- 380mm, H- 524mm
PRICE £8.00
W- 356mm, D- 203mm, H- 1981mm
PRICE £9.00
A companion piece to the writing desk.
Tapered front and back legs help to
give this chair a lighter feel, the tops of
the back legs being finished with contrasting
turned oak finials.
W- 355mm, D- 355mm, H- 890mm
PRICE £8.00
A real workshop bench with a tool
tray at the back, and integrated vice
and dog holes.
L- 1900mm, W- 730mm, H- 905mm
PRICE £9.00
A combination of storage for a variety of
trays, bread bin, and knife racks as well as
the expected substantial chopping block
makes this a really useful and stylish addition
to the kitchens equipment.
W- 565mm, D- 406mm, H- 840mm
PRICE £9.00
Accurate setting out on the top and
base are the key to the construction
of this corner cupboard woodworking
plan, a useful and unusual addition
to household storage.
W- 368mm, D- 368mm, H- 762mm
PRICE £8.00
Refectory Table TB-10 Oak Settle ST-03 Side Table TB-08 Garden Bench GA-02 Tall Cupboard CU-07
A substantial and very robust dining
table based on traditional English
designs and including stopped chamfers
on the legs. This table is a companion
piece to the Carver and Dining Chairs.
W- 1200mm, D- 735mm, H- 1830mm
PRICE £9.00
Linemine Plans Free Linemine Project
All plans come printed on A3 sheets. Cutting lists and elavations included.
LineMine woodworking plans are high quality, computer drawn plans based on actual projects designed and made by some of the UK's leading
furniture and woodwork designer/makers, such as Kevin Ley, and Mark Ripley. Most of these projects have been published in the UK's leading
woodworking magazines, Furniture and Cabinetmaking, The Router, or New Woodworking. The published projects are illustrated by Simon Rodway,
a freelance technical illustrator, who reconstructs each piece as a computer 3D model to produce the exploded perspectives seen in these magazines.
The plans are taken from these models to ensure accuracy, and include a cutting list and usually an annotated exploded drawing showing
the construction of the project.
A practical answer to the problem of
tool storage, this compact wall hung
toolbox is a real space saver.
(Width is with doors closed, double
when open)
W- 1100mm, D- 360mm, H- 900mm
PRICE £8.00
The Arts & Crafts look of this elegant settle
belies its lack of traditional jointing, constructed
entirely with housing and biscuit
joints. This settle is ideal for homes with
limited space and a lack of storage.
W- 1320mm, D- 405mm, H- 735mm
PRICE £8.00
A robust and practical medium sized
table with additional storage on a
lower shelf. The simple design is
enhanced by turned legs.
W- 1150mm, D- 700mm, H- 450mm
PRICE £8.00
This compact side table covers traditional
table construction techniques, including
dovetailed and twin tenoned drawer rails,
dovetailed drawer construction, tenoned
brackets to front and side rails and more.
L- 510mm, D- 405mm, H- 610mm
PRICE £8.00
Spend hours admiring your hard
work in the garden from this stylish
arbour seat.
W- 1520mm, D- 800mm, H- 2010mm
PRICE £9.00
A sturdy traditional garden bench,
with alternative arm and crest rail
details on the plans.
L- 1524mm, D- 597mm, H- 914mm
PRICE £8.00
A classic garden bench based on
one of Sir Edwin Lutchens designs.
Give your garden that timeless
Edwardian look..
W- 1720mm, D- 612mm, H- 1010mm
PRICE £9.00
Simple detailing and framed doors
and back give this cupboard a quality
look. Adjustable shelving adds to
its practicality.
W- 727mm, D- 422mm, H- 2107mm
PRICE £9.00
Tel No: 0845 004 8912 technical advice & info 020 8683 0292 53
S.L. Hardwoods - Linemine Plans