UGIMA® 4404 HM / UGIMA® 316L XL - Ugitech
UGIMA® 4404 HM / UGIMA® 316L XL - Ugitech
UGIMA® 4404 HM / UGIMA® 316L XL - Ugitech
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
As promised!<br />
UGIMA ® <strong>4404</strong> <strong>HM</strong> / UGIMA ® <strong>316L</strong> <strong>XL</strong><br />
C 0.030 max • Cr 16.5-17.5 • Ni 11-12 • Mo 2.0-2.5<br />
Complies with standards<br />
EN 10088-3 : 1.<strong>4404</strong> et 1.4401 X2CrNiMo 17-12-2 - AISI <strong>316L</strong> et 316 - JIS SUS 316<br />
> A new grade for the UGIMA ® 2 family<br />
> Machining performance and flexibility combined with corrosion resistance!<br />
> UGIMA ® <strong>4404</strong> is already a benchmark, UGIMA ® <strong>4404</strong><strong>HM</strong> is a new technological advance.<br />
> Optimised machinability, whatever the operation and whatever the machine used.<br />
Improved chip breakability,<br />
Productivity increases of 10 to 20% over UGIMA ® <strong>4404</strong><br />
UGITECH<br />
remains at the cutting edge of machinability.<br />
We shall continue to develop UGIMA ® 2<br />
For all grades designed for machining purposes!
Turning<br />
screw machining<br />
with Tin coated carbide insert<br />
Drilling<br />
Ø4 mm HSS<br />
over a depth of 16 mm<br />
Chip flow (cm 3 /mn)<br />
Chip flow (cm 3 /mn)<br />
28<br />
26<br />
24<br />
22<br />
20<br />
16<br />
14<br />
12<br />
10<br />
2.1<br />
1.9<br />
1.7<br />
1.5<br />
1.3<br />
1.1<br />
0.9<br />
0.7<br />
0.5<br />
+27%<br />
UGI <strong>4404</strong><br />
+10%<br />
+38% +30%<br />
UGI <strong>4404</strong><br />
UGIMA ® <strong>4404</strong><br />
UGIMA ® <strong>4404</strong><br />
UGITECH<br />
Avenue Paul Girod<br />
73403 UGINE Cedex<br />
FRANCE<br />
Tel. +33 (0)4 79 89 30 30<br />
Fax: +33 (0)4 79 89 34 34<br />
www.ugitech.com<br />
GB_Fiche format A4 recto verso adresse au verso<br />
Productivity increase calculation method<br />
Diameter (mm) 10<br />
Component length (mm) 30<br />
Material weight (kg/m) 0,617<br />
Material weight per component (g) 18<br />
Hourly machine cost (€/hr) 30<br />
No. of components per production run 100 000<br />
UGIMA ® <strong>4404</strong> UGIMA ® <strong>4404</strong><strong>HM</strong><br />
Productivity* (components per production run) 117,5 137,5<br />
Machining cost (€/component) 0,26 0,22<br />
Machining increase per component (€) 0,04**<br />
Production run increase (€) 4000<br />
Material cost per component (€) 0,04**<br />
*with 83% efficiency<br />
**Nota Bene : In this example, the machining increase<br />
is equivalent to the material cost<br />
UGIMA ® <strong>4404</strong> <strong>HM</strong><br />
UGIMA ® <strong>316L</strong> <strong>XL</strong><br />
For a production run of 100,000 components of the type illustrated above,<br />
the productivity increases obtained result in a saving of 0.04 € per component,<br />
i.e. a total of 4000 €.<br />
UGIMA ® <strong>4404</strong><strong>HM</strong><br />
UGIMA ® <strong>4404</strong><strong>HM</strong><br />
Cross-cutting<br />
with TiCN coated carbide insert<br />
VC=140 m/min - F=0,05-0,015<br />
Tool life in number<br />
of components produced in 8h<br />
1100<br />
1000<br />
900<br />
800<br />
700<br />
600<br />
500<br />
400<br />
300<br />
200<br />
175%<br />
UGI 4<strong>4404</strong><br />
17%<br />
UGIMA ® <strong>4404</strong><br />
UGIMA ® <strong>4404</strong><strong>HM</strong><br />
13<br />
Imprimeurs : Dumas & Titoulet - www.thuria.com - Photo credits : <strong>Ugitech</strong> - Non-contractual document 01/2009 - D7586