Tool case offer 2011 - Haupa

haupa

Tool case offer 2011 - Haupa

international

Offer

valid until 29.02.2012

Tool case trolly „Master“ 1000 V

hard-side case, black, 2 tool sections, document pocket, combination lock,

bottom half of case equipped with variable partitions, with high-grade

fittings, 2 locks, 38 tools, case art. 220023.

Content:

•2C-VDE-screwdrivers set PH

•VDE-Cable knive straight blade

•Industrial cleaning wipes

•Measuring tape 3 m

•PUK pocket saw, fixed handle

•VDE cable cutter 230 mm

•2C-VDE combination pliers 185 mm

•VDE side cutters 165 mm

•VDE telephone pliers 45°, 200 mm

•Automatic wire stripper 0,2 - 6 mm 2

•Ear protection plugs SNR 30 db

•2C-VDE screwdrivers PZ/FL, size 1

•2C-VDE screwdrivers PZ/FL, size 2

•Perlon fish tapes 15 mm, 3

•LED Pocket lamp 18 x 91mm 80 lm

•Universal stripper 0,2 - 4 mm 2

•Wire stripper, hooked blade, 8 - 28 mm Ø

•Crimping pliers for crimp terminals/end sleeves

•Cable cutter 160 mm, coating-insulated

•Crimping pliers 0,75 - 16 mm 2

•Ratched screwdriver „Flex“, 58 pcs.

•Safety glasses

1000 V IEC 60900:2004

Tool case offer 2011

•Spanner for switch-cabinets

•Voltage tester „Profi Plus“

•Elektronik ESD Electronic side cutter 115 mm

•Adjustable single-head wrench 24 mm

•2C Allround soft-grip scissors 140 mm

•Cable glands IP 68, M20, light-grey

•Dispenser box with insulated end sleeves (DIN)

•Cable ties UV-resistant 250 x 4,8 mm

•Nailing clips for round cable 7-10, white

1000 V IEC 60900:2004

Art. No. 22 02 54

38-pcs., 470 x 220 x 360 mm

Art. No. 22 02 52

19-pcs., 470 x 220 x 360 mm

Tool cases for industry & craftsman

Tool case trolly „Start up“ 1000 V

hard-side case, black, 2 tool sections, document pocket,

combination lock, bottom half of case equipped with

variable partitions, with high-grade fittings, 2 locks,

19 tools, case art. 220023.

Content

• 2C-VDE electricians’ screwdrivers

2,5 x 75, 4 x 100, 5,5 x 125, 6,5 x 150 mm

• 2C-VDE cross slotted screwdrivers PH, size 1 + 2

• 2C-VDE combination pliers, 185 mm

• 2C-VDE side cutters, 165 mm

• 2C-VDE telephone pliers, 200 mm

• 2C-VDE wire stripping pliers, 160 mm

•Wire stripper, hooked blade, 8 - 28 mm Ø

• Cable knife, 1 blade

• Engineers’ hammer, 300 g

• PUK pocket saw, fixed handle

• Electricians’ chisel, 10 x 250 mm

• Paint scraper, 40 mm

• Voltage tester, blade 50 mm

• Measuring tape, 3 m

• Water brushes

...convincing solutions


Hard-side tool cases

Art. No. 22 02 29

47-pcs., 460 x 160 x 310 mm

Tool case „Inspektor“

hard-side case, black, with high-grade fittings,

Master’s case with 25 tools. Case 22 00 68.

Content:

•2C combination pliers, 180 mm

•2C heavy duty side cutters, 180 mm

•2C telephone pliers, 200 mm

•2C telephone pliers, bent 200 mm

•2C water pump pliers, 240 mm

•2C wire stripping pliers, 160 mm

•2C electrician‘s screwdrivers 75, 125, 150 mm

•2C engineers’ screwdrivers 100, 150 mm

•2C cross slotted screwdrivers PH, size 1 + 2

•2C piercing awl

•Voltage tester, 150 - 250 V

•Adjustable single-head wrench

with ratch function, 200 mm

•Wire stripper, hooked blade,

8 - 28 mm Ø

•Paint scraper, 50 mm

Art. No. 22 01 77

32-pcs., 460 x 180 x 310 mm

•Electricians’ chisel, 10 x 250 mm

•Engineers’ hammer, 300 g

•Cable knife, 1 blade

•Universal scissors, 190 mm

•PUK pocket saw, fixed handle

•Measuring stick, 2 m

•Alu level 400 mm

Art. No. 22 01 76

25-pcs., 460 x 180 x 310 mm

Tool case „Compact“

hard-side case, black, 2 tool sections (one with document

pocket), bottom half of case equipped with variable partitions,

with high-grade fittings, 47 tools, case 22 00 38.

Content:

•2C electrician‘s screwdrivers,

2.5 x 75, 4 x 100, 4 x 125, 5 x 150 mm

•2C cross slotted screwdrivers PH, size 1 + 2

•Electronic screwdriver set, 7-pieces

•2C combination pliers, 180 mm

•2C side cutters, 160 mm

•2C telephone pliers, 200 mm

•Wire stripper, hooked blade, 8 - 28 mm Ø

•Cable stripping knife, 4 - 16 mm Ø

•Automatic wire stripper, 0.2 - 6 mm2 •Cable cutter with a snap

•2C Soft-Grip scissors, 140 mm

•PUK pocket saw, fixed handle

•HAUPA „Bit box“, 17-pieces

•SDS-plus set, 5-pieces

•Spirit level, 400 mm

•Measuring tape, 3 m

•Voltage tester „Basic“

www.haupa.com

The ideal tool assortment

hard-side case, black, with high-grade fittings, with 32 tools.

Case 22 00 68.

Content:

•2C combination pliers, 180 mm

•2C telephone pliers, 200 mm

•2C side cutters, 160 mm

•2C telephone pliers, 200 mm

•2C water pump pliers, 240 mm

•ESD electronic side cutters, 115 mm

•ESD electronic needle nose pliers, 130 mm

•2C electrician screwdrivers 75, 75, 125, 150 mm

•2C engineers’ screwdrivers 100, 150 mm

•2C cross slotted screwdrivers PH, size 1 + 2

•Electronic screwdriver set, 7-pieces

•Solder for electronic work, Sn 60%, 1.5 mm, 100 g

•Claw retriever with fixed shaft, size 165

•2C piercing awl, square

•2C socket wrenches 7, 8, 10

•Checking mirror, 210 mm

•Socket wrench set, 1/4”, 33-pieces

•Contact soldering iron, 30 watt

•Cable stripping knife, plastic handle

•Bench hammer, 300 g

•Universal saw, heavy, 150 mm

•Cable stripper, 0.5 - 4 mm Ø

•Tweezer angled

•Combination snips, 190 mm

•VDE/GS Voltage tester


Art. No. 22 02 44

19-pcs., 460 x 160 x 310 mm

Tool case „Basic“

hard-side case, black, 2 tool sections (one with document

pocket), bottom half of case equipped with variable partitions,

with high-grade fittings, 19 tools. Case 22 00 38.

Content:

•2C-VDE electrician‘s screwdrivers,

2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

• 2C-VDE cross slotted screwdrivers PH, size 1 + 2

•2C combination pliers, 180 mm

•2C side cutters, 160 mm

•2C telephone pliers, straight, 200 mm

•2C wire stripping pliers, 160 mm

•Wire stripper, hooked blade, 8 - 28 mm Ø

•Cable knife, 1 blade

•Engineers’ hammer, 300 g

•PUK pocket saw, fixed handle

•Electricians’ chisel, 10 x 250 mm

•Voltage tester, blade 50 mm

Art. No. 22 05 56

25-pcs., 400 x 245 x 230 mm

•Measuring stick, 2 m

•Paint scraper, 40 mm

•Water brushes

Art. No. 22 01 53

19-pcs., 460 x 160 x 310 mm

Tool case „Basic VDE“

hard-side case, black, 2 tool sections (one with document

pocket), bottom half of case equipped with variable partitions,

with high-grade fittings, 19 tools. Case 22 00 38.

Content:

•2C-VDE electrician‘s screwdrivers,

2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

• 2C-VDE cross slotted screwdrivers PH, size 1 + 2

•2C-VDE combinations pliers, 185 mm

•2C-VDE side cutters, 165 mm

•2C-VDE telephone pliers, straight, 200 mm

•2C-VDE cable cutter, 200 mm

•Wire stripper, hooked blade, 8 - 28 mm Ø

•Cable knife, 1 blade

•Engineers’ hammer, 300 g

•PUK pocket saw, fixed handle

•Electricians’ chisel, 10 x 250 mm

•Voltage tester blade, 50 mm

Nylon cases, hard-side tool cases

HAUPA „Trend Box Plus“

Tool bag for professional use. With inside and outside pockets, easy access

to the tools, inside and outside compartments for tools, reinforced handles,

material: extra strong 600D polyester, colour: green, black. Big box 22 00 95.

Content:

•2C-VDE electrician‘s screwdrivers,

2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

• 2C-VDE cross slotted screwdrivers PH, size 1 + 2

•2C combination pliers, 180 mm

•2C telephone pliers, 200 mm

•2C side cutters, 160 mm

•2C water pump pliers, 240 mm

•2C wire stripping pliers, 160 mm

•Bit-Box, 17-pieces

•Voltage tester „Basic“

•Allen keys set, 7-pieces

•Adjustable single-head wrench

•Chalk - blue

•Impact cord roller

•Carpenters’ pencil

1000 V IEC 60900:2004

•Measuring stick, 2 m

•Paint scraper, 40 mm

•Water brushes

•Engineers’ hammer 300 g

•Cable stripping knive

•Junior hacksaw, heavy, 150 mm

•Cable cutters, 160 mm, insulatet

•Combi-drillbox

•Spanners for switch-cabinets

•Folding rule, fibre glass, 2 m


Art. No. 22 02 11

7-pcs., 200 x 100 x 300 mm

HAUPA „Tool bag VDE“

Tool bag with inner and outer tool compartments, rubber-reinforced

base. Comes complete with 13 tools. Material: extra strong 600D

polyester, colour: green, black. Tool bag 22 00 61.

Content:

•VDE combinations pliers, 185 mm

•VDE side cutters, 165 mm

•2C-VDE telephone pliers, straight, 200 mm

•2C-VDE wire stripping pliers, 160 mm

•2C-VDE electrician‘s screwdrivers,

2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

• 2C-VDE cross slotted screwdrivers PH, size 1 + 2

•Spanners for switch-cabinets

•Cable knife

•Voltage tester „Basic“

Art. No. 22 05 00

22-pcs., 320 x 190 x 280 mm

HAUPA „Tool belt VDE“

8 compartments for your tools,

material: extra strong 600D polyester, colour: green, black.

Tool belt 22 01 05.

Content:

• 2C combination pliers, 185 mm

• 2C side cutters, 165 mm

• 2C electrician’s screwdriver 3.5 x 100 mm

• 2C cross slotted screwdrivers PH, size 1 + 2

• Voltage tester „Basic“

• Cable knife, 1 blade

Art. No. 22 05 10

13-pcs., 320 x 190 x 280 mm

HAUPA „Tool bag“

Tool bag with inner and outer tool compartments, rubber-reinforced

base. Comes complete with 22 tools. Features: Waterproof and dirt

resistant, rubber-reinforced base, double cross-seam for heavy loads,

removable shoulder strap, adjustable, 10 compartments inside/outside

(various sizes), belt for spirit level (outside), material: extra strong 600D

polyester, colour: green, black. Tool bag 22 00 61.

Content:

•2C combination pliers, 200 mm

•2C side cutters, 160 mm

•2C telephone pliers, straight, 200 mm

•2C wire stripping pliers, 160 mm

•2C-VDE electrician‘s screwdrivers,

2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

• 2C-VDE cross slotted screwdrivers PH, size 1 + 2

•Voltage tester

•Wire stripper, hooked blade,

8 - 28 mm Ø

•Water brush

•Paint scraper, 40 mm

•Electrician’s chisel, 10 x 250 mm

•Stone chisel, 300 mm

1000 V IEC 60900:2004

•Engineers’ hammer, 300 g

•Sledge hammer, 1000 g

•Plaster container

•Cable knife, 1 blade

•PUK pocket saw, fixed handle

•Carpenter’s pencil


Art. No. 22 02 32

35-pcs., 500 x 430 x 210 mm

Tool case „Delux Plus“ 1000 V

hard-side case, signal-red, with high-grade fittings, complete with 54 safety tools,

case 22 00 76.

Content:

• 2C-VDE electrician‘s screwdriver

2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

• 2C-VDE cross slotted screwdriver PH, size 1 + 2

• VDE telephone pliers, coating insul., straight, 200 mm

• VDE telephone pliers, coating insul., bent, 200 mm

• VDE combination pliers, coating insul., 185 mm

• VDE side cutters, coating insul., 165 mm

• VDE wire stripping pliers, coating insul., 160 mm

• Socket wrenches 5.5, 7, 8, 10 mm

• Voltage tester „Profi Plus“

• Reversible ratchet, coating insul., 1/2“

• T-sliding handle, coating insul., 1/2“

• Hexagon sockets, coating insul., 10, 11, 12, 13, 14, 15, 16

• Open end spanners, coating insul., 10, 12, 13, 19, 22, 24

• 2C-VDE Cable knife

1000 V IEC 60900:2004

• Cable scissors 200 mm, coating insul.

• Slip-on bushes 5-pieces No. 1, 10 mm

• Slip-on bushes 5-pieces No. 2, 10 mm

• Slip-on bushes 5-pieces No. 3, 10 mm

• Plastic pliers, 180 mm

• Plastic clamp

• Covering tape, grey

• Covering tape, red

• Safety grip

• Gloves size 9

Art. No. 22 01 36

32-pcs., 460 x 180 x 310 mm

Tool case „Profi VDE“ 1000 V

hard-side case, black, 2 tool sections, document pocket,

combination lock, bottom half of case equipped with variable partitions,

shoulder strap, with high-grade fittings, 35 tools.

Case 22 00 31.

Content:

•VDE long chain nose pliers, coating insul.,

straight, 200 mm

•VDE combination pliers, coating insul. 185 mm

• VDE heavy duty side cutters, coating insul. 200 mm

•VDE wire stripping pliers, coating insul. 160 mm

•VDE cable cutter, coating insul., max. 15 mm

•2C-VDE Cable knife, 50 mm

•Finger gloves, size 9

•2C-VDE electrician’s screwdrivers

2.5 x 75, 3 x 100, 6.5 x 150, 8 x 175 mm

•2C-VDE socket wrenches, size 5.5, 7, 8, 10

•2C-VDE cross slotted screwdrivers PH, 1 + 2

•NH-safety fuse grip

•Rubber towel, 1000 x 1000 x 1,6 mm

Art. No. 22 02 39

54-pcs., 460 x 180 x 310 mm

Tool case „Leopard“ 1000 V

hard-side case, signal-red, with high-grade fittings, complete

with 32 safety tools, case 22 00 76.

Content:

•2C-VDE electrician’s screwdrivers

2.5 x 75, 4 x 100, 6.5 x 150, 8.0 x 175, 10.0 x 200 mm

•2C-VDE cross slotted screwdrivers PH, size 1 + 2

•2C-VDE cross slotted screwdrivers PZ, size 1 + 2

•Retaining screwdrivers 100, 125 mm

•Retaining screwdriver, cross-slotted

•Right angle allen keys, coating insul., 6, 8 mm

•VDE round nose pliers, coating insul., 160 mm

•VDE telephone pliers, coating insul., straight, 200 mm

•VDE telephone pliers, coating insul., bent, 200 mm

•VDE combination pliers, coating insul., 185 mm

•VDE wire stripping pliers, coating insul., 160 mm

•VDE side cutter, coating insul., 165 mm

•Socket wrenches 5,5, 6, 7, 8 mm

•Plastic clips, 160 mm

•Slip on bushes,

No. 1, 2, 3 (each 4 x)

•Self adhesive PVC tape,

red, 10 m

•Heat protection gloves

•Safety glasses

1000 V IEC 60900:2004

•Voltage Tester „Profi Plus“

•Cable knife, coating insul.,

•2C-VDE cable knife

•Cable scissors

•Plastic pliers 180 mm

•Covering tape, red 10 m

•NH-safety fuse grip

•Finger gloves, size 9

...convincing solutions

HAUPA GmbH & Co. KG, Königstraße 165-169, D-42853 Remscheid, Phone: +49 (2191) 8418-0. Fax: +49 (2191) 8418840, E-Mail: sales@haupa.com.

Valid until 29.02.2012. Errors and technical changements reserved.


Art. No. 22 02 35

19-pcs., 500 x 430 x 210 mm

Tool case „Start-up“

hard-side case, black, 2 tool sections, document pocket,

combination lock, bottom half of case equipped with variable

partitions, with high-grade fittings, 19 tools. Case 22 00 31.

Content:

•2C-VDE electrician‘s screwdrivers

2.5 x 75, 4 x 100, 5.5 x 125 und 6.5 x 150 mm

•2C-VDE cross slotted screwdrivers PH, size 1 + 2

•2C combination pliers, 185 mm

•2C side cutters, 165 mm

•2C telephone pliers, 200 mm

•2C wire stripping pliers, 160 mm

•Wire stripper, hooked blade, 8 - 28 mm Ø

•Cable knife, 1 blade

•Engineers’ hammer, 300 g

•PUK pocket saw, fixed handle

•Electricians’ chisel, 10 x 250 mm

•Paint scraper, 40 mm

Art. No. 22 03 03

21-pcs., 460 x 180 x 310 mm

•Voltage tester, blade 50 mm

•Measuring tape, 3 m

•Water brush

Tool case „Start-up VDE“

hard-side case, black, 2 tool sections, document pocket,

combination lock, bottom half of case equipped with variable

partitions, with high-grade fittings, 19 tools, case 22 00 31.

Content:

• 2C-VDE electricians’ screwdrivers

2,5 x 75, 4 x 100, 5,5 x 125, 6,5 x 150 mm

• 2C-VDE cross slotted screwdrivers PH, size 1 + 2

• 2C-VDE combination pliers, 185 mm

• 2C-VDE side cutters, 165 mm

• 2C-VDE telephone pliers, 200 mm

• 2C-VDE wire stripping pliers, 160 mm

•Wire stripper, hooked blade, 8 - 28 mm Ø

• Cable knife, 1 blade

• Engineers’ hammer, 300 g

• PUK pocket saw, fixed handle

• Electricians’ chisel, 10 x 250 mm

• Paint scraper, 40 mm

• Voltage tester, blade 50 mm

• Measuring tape, 3 m

• Water brushes

Art. No. 22 02 21

19-pcs., 500 x 430 x 210 mm

Tool case „Power Pack“ 1000 V

hard-side case, signal-red, with high-grade fittings, complete with

21 safety tools, case 22 00 76.

Content:

•2C-VDE electrician‘s screwdrivers

2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

•2C-VDE cross slotted screwdrivers PH, size 1 + 2

•2C-VDE screwdrivers PZ/FL, size 1 + 2

•2C-VDE combination pliers, 185 mm

•2C-VDE diagonal cutter, 165 mm

•2C-VDE telephone pliers, 200 mm

•2C-VDE cable cutter, 200 mm

•2C-VDE water pump pliers, 240 mm

•VDE cable knife, straight blade, 50 mm

•Safety glasses „PRO“

•Automatic wire stripper, 0.2 - 6 mm 2

•Voltage tester „TestPen“

•Voltage tester „Profi Plus“

•Finger gloves, size 9

•Ear protection plugs

•NH-safety fuse grip

1000 V IEC 60900:2004

1000 V IEC 60900:2004

Hard-side tool cases


Leather cases, nylon cases

Tool case „Start“

Tool case for apprentices, made from black coloured cowhide

equipped with 20 tools, case 22 00 60.

Content:

•2C telephone pliers, 200 mm

•2C combination pliers, 180 mm

•2C side cutters, 160 mm

•2C wire stripping pliers, 160 mm

•2C-VDE electrician‘s screwdrivers,

2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

•2C-VDE cross slotted screwdrivers PH, size 1 + 2

•Cable knife, 1 blade

•Electricians’ chisel, 10 x 250 mm

•VDE/GS Voltage tester - blade 50 mm

•PUK pocket saw, fixed handle

•Brush

•Stone chisel, 300 mm

•Engineers’ hammer, 300 g

1000 V IEC 60900:2004

1000 V IEC 60900:2004

Art. No. 22 05 74

20-pcs., 440 x 190 x 300 mm

•Double-face sledge hammer, 1000 g

•Spatula, 40 mm

•Plaster container

Art. No. 22 01 68

20-pcs., 365 x 150 x 250 mm

Art. No. 22 01 68/VDE

20-pcs., 365 x 150 x 250 mm

HAUPA „Kick-Off“

Solid Nylon tool case for the trainee –

with 20 tools.

Content:

• 2C-VDE telephone pliers, 200 mm

• 2C-VDE combination pliers, 185 mm

• 2C-VDE side cutters, 165 mm

• 2C-VDE wire stripping pliers, 160 mm

• 2C-VDE electrician‘s screwdrivers,

2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

• 2C-VDE cross slotted screwdrivers PH, size 1+2

• Cable knife, 1 blade

• PUK pocket saw, fixed handle

• Brush

• Electricians’ chisel, 10 x 250 mm

• VDE/GS Voltage tester, blade 50 mm, 100 – 250 V

• Stone chisel, 250 mm

• Engineers’ hammer, 300 g

• Double-face sledge hammer, 1000 g

• Spatula, 40 mm

• Plaster container

Tool case „Start VDE“

Tool case for apprentices, made from black coloured cowhide

equipped with 20 tools, case 22 00 60.

Content:

•2C-VDE telephone pliers, 200 mm

•2C-VDE combination pliers, 180 mm

•2C-VDE cutters, 160 mm

•2C-VDE wire stripping pliers, 160 mm

•2C-VDE electrician‘s screwdrivers,

2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm

•2C-VDE cross slotted screwdrivers PH, size 1 + 2

•Cable knife, 1 blade

•Electricians’ chisel, 10 x 250 mm

•VDE/GS Voltage tester - blade 50 mm

•PUK pocket saw, fixed handle

•Brush

•Stone chisel, 300 mm

•Engineers’ hammer, 300 g

•Double-face sledge hammer, 1000 g

•Spatula, 40 mm

•Plaster container

www.haupa.com


W 4213K1

Tool case trolly „Fly“

hard-side case, black, 3 tool sections, 2 locks,

document pocket, with high-grade fittings, bottom half of

case equipped with variable partitions

Art. No. 22 02 48

470 x 220 x 360 mm

Network service case HAUPA

hard-side case, black, for electricians and network technicians,

with high-grade fittings, 2 tool sections (one with

document pocket), bottom half of case contains 8 small

removable boxes, secured for transport purposes

Tool case „Aktion“

hard-side case, 2 tool sections (one with document

pocket). Ground bowl with variables to dividing bars,

with high-grade fittings

Tool case „Pendant“

hard-side case, signal red, 30 tool compartments, with

high-grade fittings, 1 combination lock, 1 section for

documents, 2 plate for tools, 2 locks, variables to

dividing bars

Company stamp

Art. No. 22 00 73

460 x 160 x 310 mm

Tool case „Omega“

hard-side case, black, 30 tool compartments, with highgrade

fittings, 1 combination lock, 1 section for

documents, 2 plate for tools, 2 locks, variables dividing

bars

Art. No. 22 00 68

460 x 180 x 310 mm

Art. No. 22 00 38

460 x 160 x 310 mm

Art. No. 22 00 76

460 x 180 x 310 mm

HAUPA-Group

www.haupa.com

DIN EN ISO 9001

QZERTIFIKAT

HAUPA Belt bag „Tool belt“

8 compartments for your tools,

reinforced main compartment,

steel rivets for high reliable quality.

Big front compartment for nails or measurement

tape, hammer sleeve, fits up to 135 cm hips,

material: extra strong 600D polyester,

colour: green, black

Art. No. 22 01 05

200 x 100 x 300 mm

Tool cases „Tool bag“

Tool bag with inner and outer tool compartments,

rubber-reinforced base. Waterproof and dirt

resistant, rubber-reinforced base, double

cross-seam for heavy loads, removable shoulder

strap, adjustable, 10 compartments inside and

outside (various sizes), belt for spirit level (outside),

material: extra strong 600D polyester,

colour: green, black

Art. No. 22 00 61

320 x 190 x 280 mm

HAUPA „Big Box“

very big box look alike Tool bag,

easy approach to the tools,

inside and outside compartments for tools,

reinforced handles,

material: extra strong 600D

polyester, colour: green, black

Art. No. 22 00 95

400 x 245 x 230 mm

...convincing solutions

HAUPA GmbH & Co. KG, Königstraße 165-169, D-42853 Remscheid, Phone: +49 (2191) 8418-0. Fax: +49 (2191) 8418840, E-Mail: sales@haupa.com.

Valid until 29.02.2012. Errors and technical changements reserved.

Hard-side cases, leather cases, nylon cases

More magazines by this user
Similar magazines