Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

PRPOS (PP)
Chapter —Program Instructions
Purpose Statement for specifying the insertion point for a line of text, a bar code,
an image, a box, or a line.
Syntax PRPOS|PP,
is the X-coordinate (number of dots from the origin).
is the Y-coordinate (number of dots from the origin).
Default value: 0,0
Reset to default by: PRINTFEED execution.
Remarks When the printer is set up, a “print window” is created. This involves
specifying the location of the origin along the X-axis, setting the max. print
width along the X-axis from origin, and setting the max. print length along
the Y-axis from origin.
The X-coordinate goes across the media path and the Y-coordinate along
the media feed direction, as illustrated below. They are set in relation to the
origin on the printhead, not in relation to the media. Thus, the position
where an object actually will be printed depends on the relation between
printhead and media at the moment when the printing starts.
Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual 11