Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

Chapter —Bar Codes
Setup Bar Codes
Intermec Fingerprint v8.xx-compatible EasyCoder printers can optionally
be fitted with an EasySet bar code wand or a scanner (see the
printer’s User’s Guide). By reading a special bar code containing encoded
data for one or several setup parameters, the printer’s setup can easily be
changed, even by a person without any knowledge of Intermec Fingerprint,
the Direct Protocol, or their supporting software.
You could print such bar codes with your printer and paste them on a
board in the vicintity of the printer. When, for example, the operator
needs to switch to another type of media, he or she will only have to pick
up the EasySet wand or scanner and read the appropriate bar code.
The only bar code that can be used for this purpose is a Code 128 containing
the function character FNC3 (ASCII 130 dec). If the FNC
character is missing, the printer will regard the bar code as containing
ordinary ASCII input to the "wand:" device.
Please refer to the EasySet Bar Code Wand Setup manual for syntax and
parameter descriptions.
0 Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual