IMPORTANT SAFETY INSTRUCTIONS SAVE THESE ... - Janome

content.janome.com

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE ... - Janome

4

2

(B)

(A)

7

1

5

3

11

7 Press the bobbin winding button again .

When the bobbin is fully wound, the bobbin winder

stopper returns to the original position and the

machine will stop automatically.

Cut the thread with the thread cutter.

Inserting the Bobbin

1 Place the bobbin in the bobbin holder with the thread

running off counterclockwise.

2 Guide the thread into the front notch (A) on the

bobbin holder.

3 Draw the thread to the left, sliding it between the

tension spring blades.

4 Continue to draw the thread lightly until the thread

slips into the side notch (B).

5 Pull out about 10 cm (4") of thread to the rear.

Reattach the hook cover plate.

NOTE:

A threading chart is shown on the hook cover plate for

your reference.

More magazines by this user
Similar magazines