IMPORTANT SAFETY INSTRUCTIONS SAVE THESE ... - Janome

content.janome.com

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE ... - Janome

Utility(U)

Straight Stitch

1

2 3 4 5 6 7

8 9 10 11 12 13 14

15 16

17

18

19

A

26

Utility Stitches

Straight stitches

Patterns U1 to U6 are straight stitches for seaming.

Press the pattern selection key of the desired stitch.

Starting to sew

Raise the presser foot and position the fabric next to a

seam guideline on the needle plate. Lower the needle

to the point where you want to start.

Pull the needle and bobbin threads towards the rear.

Press the start/stop button or foot control. Gently guide

the fabric along the seam guideline letting the fabric

feed naturally.

Sewing from the edge of thick fabric

The black button on the zigzag foot locks the foot in the

horizontal position.

This is helpful when you start sewing at the extreme

edge of thick fabrics or sewing across a hem.

Lower the needle into the fabric at the point where you

wish to start sewing.

Lower the foot while pushing in the black button. The

foot will be locked in the horizontal position to avoid

slipping.

Changing sewing direction:

Stop the machine and bring the needle down into the

fabrics by pressing the needle up/down button.

Raise the presser foot.

Pivot the fabric around the needle to change the sewing

direction as desired.

Lower the presser foot and start sewing in a new

direction.

More magazines by this user
Similar magazines