IMPORTANT SAFETY INSTRUCTIONS SAVE THESE ... - Janome

content.janome.com

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE ... - Janome

Buttonholes(B)

Auto BH

Pull Button Holder firmly.

1

AUTO

2 3 4 5 6 7

8 9 10 11 12 13 14

15 16

17 18 19 20 21

Step 1

Sew to length required,

then press " ".

Step 2

Sew up to start position,

then press " ".

Step 3

Machine stops when

BH is completed.

Restart for the same size.

Different size

R

R

R

R

36

Automatic (square) buttonhole

Select pattern B2.

Pull the button holder all the way out.

Mark the buttonhole position on the fabric. Insert the

fabric under the foot. Press the up/down needle button

twice. Remove the fabric to the left to draw the needle

thread through the hole of the foot.

Insert the garment under the foot, and lower the needle

at the starting point.

Then lower the automatic buttonhole foot R.

NOTES:

You do not need to pull down the buttonhole lever.

If you wish to change the buttonhole width and stitch

density press the adjust key.

If you wish to sew a buttonhole longer than the size

permitted by the automatic buttonhole foot R, use satin

stitch foot F.

Step-1

Sew up the left side until the end of the buttonhole

mark. Then press the reverse button.

Step-2

Depress the foot control. The machine will automatically

tack and sew down the right side of the buttonhole.

Stop the machine when you are directly opposite the

starting point.

Press the reverse button.

Step-3

Keep the foot control depressed. The machine will

bartack, lock the stitches and automatically stop when

the buttonhole is completed.

To make the next buttonhole, position the fabric and

step down on the foot control.

To sew the next button hole in a different size press the

exit key X

. The machine will sew another

buttonhole identical to the first one each time you step

down on the foot control.

NOTE:

To cut the buttonhole opening, refer to the instructions

on the previous page.

More magazines by this user
Similar magazines