51 Rolled hemming This section provides two options of the rolled hemming, one with straight stitch and the other with zigzag stitch. Attach the rolled hem foot D. Fold the fabric edge twice to form a hem, 0.3 cm (1/8”) wide and 5 cm (2”) long then press. Place the fabric aligning the hem edge with the guide of the foot. Lower the foot and sew several stitches slowly while pulling on the threads to assist feeding the fabric. Stop the machine and lower the needle into the fabric. Raise the foot and insert the folded portion of the fabric into the curl of the foot. Lower the foot and sew while lifting the edge of the fabric to keep it feeding into the curl smoothly and evenly.
Right side of fabric Zipper1 Straight Stitch 1 Sew left side Sew right side (A) (B) Opening size 1 cm Basiting E Zipper size Reverse stitch 2 cm 52 Zipper sewing This section provides 2 options of zipper sewing, one for lapped zipper and the other for concealed zipper. Lapped zipper sewing Press the lapped zipper icon and the zipper sewing window will open. (A) To sew the left side of the zipper, attach zipper foot E with the pin on the right-hand side. (B) To sew the right side of the zipper, attach zipper foot E with the pin on the left-hand side. Fabric preparation Add 1 cm (3/8˝) to the zipper size. This is the overall opening size. Place the right sides of the fabric togather and sew to the end of the opening with a 2 cm (13/16˝) seam allowance. Reverse stitch to lock the seam. Manually increase the stitch length to 5.0 and baste the zipper opening with the thread tension loosened. To sew 1. Fold back the left seam allowance. Turn the right seam allowance under to form a 0.2 to 0.3 cm (1/8˝) fold. Place the zipper teeth next to the fold and pin in place. Set the stitch length and thread tension back to the default.