Completed Emerald Green 250 1 Stitch Counter 00001 ST:126x110mm 2 13 min 6 Colors 7,052 ST 70x78mm 1 Jog/ST X START STOP Auto A Z 2 71 Starting to Sew Embroidery Press the Pattern Selection key to select the desired pattern. Lower the presser foot. Press the start/stop button and sew 5 to 6 stitches. Press the start/stop button again to stop the machine. Raise the presser foot, cut the loose thread close to the beginning of the starting point and lower the presser foot. 1 Loose thread Press the start/stop button to start sewing again. The machine will stop (and trim the threads if the auto thread cutting is activated) automatically when the first color section is finished. Change the thread and sew the next section. Sewing results The embroidery pattern is sewn against the centerlines on the fabric as shown. 2 Centerlines on the Fabric NOTE: The embroidery stitch pattern position against the centerlines is indicated on the template sheets.
Gothic(1/3) ST:126x110mm 1 A Gothic Script Cheltenham Hollowblock 1 2 3 4 Bauhaus Galant Typist Brush 5 6 7 8 First Grade Jupiter 2 Letters 3 Letters 9 10 11 12 Border Normal Sew 13 14 2 A Z X 72 Monogramming Press the monogram key to open the monogram window. In the monogram window, you can program words by pressing the alphabet keys directly. After you press an alphabet key, the letter is memorized and the cursor is moved to the right. 1 Cursor NOTE: Use the standard hoop ST for monogramming. Font selection You can change the type of font for monogramming by pressing the font key. The font selection window will open. 2 Font key To select the desired font, press one of the following options: 1 Gothic font 2 Script font 3 Cheltenham font 4 Hollowblock font (upper case only) 5 Bauhaus font 6 Galant font 7 Typist font 8 Brush font 9 First grade font 10 Jupiter font (upper case only) 11 2-Letter 12 3-Letter 13 Border patterns 14 Normal sew patterns (patterns similar to ordinary stitches)