ROPA Flyer Microtopper 2 englisch.indd
ROPA Flyer Microtopper 2 englisch.indd
ROPA Flyer Microtopper 2 englisch.indd
Transform your PDFs into Flipbooks and boost your revenue!
Leverage SEO-optimized Flipbooks, powerful backlinks, and multimedia content to professionally showcase your products and significantly increase your reach.
Precision Leaf topping<br />
<strong>ROPA</strong> has responded to the growing demand<br />
for harvesting beet with their crowns intact<br />
but leaves and storks cut off and developed<br />
the optimal solution which should equally<br />
satisfy beet growers, lifting contractors and<br />
sugar processors!<br />
The <strong>ROPA</strong> Micro-Topper 2 has proven itself in<br />
operation with striking results. No other harvester<br />
offered a better ‘cut’ at the harvesting trials<br />
in Lelystadt.<br />
The significant advantages of <strong>ROPA</strong><br />
Micro-Topping are:<br />
• Additional yield for the beet grower through<br />
harvesting the undamaged beet precisely<br />
topped<br />
• Subject to the requirements of the beet grower<br />
the Micro-Topper 2 performs a second<br />
cut or in order to harvest the whole beet<br />
only ‘shaves off’ the leaves (Micro-Topping)<br />
• Consistently high harvesting speeds are possible<br />
when topping with a secondary precision<br />
scalping unit – undiminished operational<br />
efficiency.<br />
• Even with a highly irregular growth a perfect<br />
alignment can be made with the visibly varying<br />
head heights of the beet<br />
• No increased fuel consumption, spare part<br />
expenditure and maintenance<br />
• A simple upgrade of all harvesting components<br />
is possible<br />
With its Micro-Topper 2 <strong>ROPA</strong> allows for total harvesting<br />
of the entire usable beet. The additional<br />
yield offers the beet grower an increased profit.<br />
- innovative technology for an<br />
economical sugar beet harvest<br />
Micro-Topping<br />
The beet leaves are ‘shaved off’ the beet<br />
with a sharp blade<br />
Micro-Topping-Cut at the leaf base<br />
Optimal harvest = higher yield
The most efficient beet harvester,<br />
proven at Beet Europe 2010<br />
A greater yield and by far the least wastage of all beet harvesters tested<br />
Signifi cantly less wastage: the <strong>ROPA</strong> euro-Tiger V8-3<br />
LIZ - News<br />
Beet harvesters with varying degrees of wastage<br />
Results of the harvesting trials held at Lelystadt (NL), Beet Europe 2010<br />
As part of the programme of Beet Europe 2010 ten beet harvesters underwent trials with a view to comparing their<br />
lifting effi ciency. The results were compiled by the Dutch Sugar Beet Institute (IRS). An extract of it published in<br />
the table below clearly shows the quality fl uctuations of the harvesters at various stages of the operating process.<br />
In view of the high yields of 95 t/ha the total harvesting losses in €/ha are however relatively low. In general a<br />
5% loss, the equivalent of ca. 160 €/ha, is unavoidable. With the total amount of wastage shown, the soil residue<br />
(share of freight cost) and the loss of sugar during storage at the edge of the fi eld in terms of beet damage are<br />
however not taken into account.<br />
Results of harvester trials (Lelystad 2010)<br />
Source: IRS 2010<br />
Source: www.liz-online.de/skripte/newspopup.asp?intWerk=1&ID=21281<br />
lifting Quality % Harvesting Losses €/ha<br />
topping quality soil<br />
topped root loss of<br />
with leaf stalks too low & residue too low & fracture whole total<br />
> 2cm