Mobile Device Power Monitor Manual - GitHub Pages

Recommendations

Info

5 Hardware and Software Requirements for the Development Workstation A dedicated Windows platform workstation is required to be used with the Power Monitor to achieve the optimal performance and results. • Microsoft Windows XP SP2, Windows Vista, or Windows 7 • 1 GHz 32-bit (x86) or 64-bit (x64) processor • 4 GB of system memory • 40 GB hard drive with at least 15 GB of available space • Full Speed USB 1.1/USB 2.0 – integrated chipset or PCI/PCI Express add in card. USB Hubs should not be used with the Power Monitor
Installing the PowerTool Software, Drivers and Connecting to the Power Monitor Hardware 6 Prior to installing the latest version, uninstall any previous version of the Power Monitor Software from the Control Panel. Create a new temporary folder on the development workstation under the root directory (C:\). Copy PowerTool.zip to the development workstation. Extract the contents of PowerTool 4.X.X.X.zip to the temporary folder. Run PowerTool Install.exe Follow the on screen prompts to install the PowerTool Software. Power Monitor Driver Installation After the PowerTool application has been installed and this is the first time the workstation will be running the PowerTool application you will need to install two drivers, the Power Monitor driver and the Firmware driver. Instructions are as follows: 1. Power on Power Monitor in normal mode – Green led should be on. 2. Under Device Manager find Mobile Device Power Monitor – will have a yellow exclamation mark. 3. Right click and select Update Driver Software… 4. Select Browse my computer for driver software 5. Browse to C:\Program Files (x86)\Monsoon Solutions, Inc\PowerMonitor\Drivers\PC and click on Next. 6. Click on Close once the driver has finished installing. 7. Under Device Manager – Ports (COM & LPT) verify that the Mobile Device Power Monitor (COMx) has enumerated properly.
Page 1 and 2: Mobile Device Power Monitor Manual
Page 3 and 4: 2 Document Revision History Date Re
Page 5: 4 Mobile Device Power Monitor
Page 9 and 10: 8 Connecting to the Power Monitor H
Page 11 and 12: 10 Using the PowerTool Software Aft
Page 13 and 14: 12 Powering-up and Powering-down a
Page 15 and 16: 14 Protecting the Main Power Supply
Page 17 and 18: 16 The Legend Dialog Box The Legend
Page 19 and 20: 18 Markers Markers enable users to
Page 21 and 22: 20 Zoom Selecting a certain area wi
Page 23 and 24: 22 In addition to Auto USB passthro
Page 25 and 26: 24 Auxiliary Port (Aux) (Experiment
Page 27 and 28: 26 Functional Description of the Po
Page 29 and 30: 28 USB Channel Component Min Max In
Page 31 and 32: 30 Battery By-pass Modification Ins
Page 33 and 34: 32 Cover the main body of the batte
Page 35 and 36: 34 Cut a 10 centimeter length piece
Page 37 and 38: 36 Power Monitor Data and Control P
Page 39 and 40: 38 Code Meaning D Start immediately
Page 41 and 42: 40 C20000 Stop capture after 20000
Page 43 and 44: 42 Name Description C# data type By
Page 45 and 46: 44 Marker 0x8000 Voltage 0x0700 Tab
Page 47 and 48: 46 auxCoarseResistor Resistor offse
Page 49 and 50: 48 The following table lists the va

Mobile Device Power Monitor Manual - GitHub Pages

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?