High Voltage Generator 1.3 - SCHNIER Elektrostatik GmbH

1.3
High Voltage Generator
Type: HER 18/03
Part No.: 810192
95 mm
HER 18/01
215 mm
HVE 13/01
ca. 560 mm
Nr. 810192DE_02/00
Sheet 1 of 2
Technical Data Output voltage:: 100 kV negative
Output current: 700 µA
Input voltage: 36 V DC
Power consumption: 100 W
Dischraging resistor: 1GOhm / 40 W
surrounding conditions: +5°C to + 40°C
max. 80% rel. humidity
Dimensions L / W / H : 560 / 215 X 90 mm
Weight : 6500g
Safety mode t: IP 65
Construction modet: Insulartion encapsuled,
Fully shielded,
Mulstiple switching acc. to
the cascade priciple
High voltage connection: Grease free plug point
350mm approx. deep
Control: Type HST 01/01
Standards applied: See safety advise
Characteristics: Exchangeable discharging
resistor
Standard = 1G Ohm

1.3
Description
Load Diagram
Safety Advise
High Voltage Generator
140
120
100
80
60
40
20
Voltage
in kV
100 200 300 400 500 600 700 800 900 1000
No. 810192DE_02/00
Sheet 2 of 2
The high capacity, high voltage generator, type HER 18/03, is
constructed for the use in electrostatic coating plants for wet paint,
powder paint and for flock. The compact, encapsuled construction
allows an installation near the spray system. The HV-generator
is suitable for the use in explosion endangered areas of the zones
2, 21 und 22 if the combustible atmosphere is generated by
coating systems. The supply voltage from the control device comes
to 36V DC.
Current
in µA
The operation of the HV-geneator, type HER 18/03, is permissible
only in connection with the HV-control, type HST 01/XX, and only
with eledctrostatic coating plants which conform to at least one
of the safey features listed in the safety data sheet 810001SE02.