Exmark - Heavy Duty Equipment

heavydutyturf.com

Exmark - Heavy Duty Equipment

Exmark Mfg. Co., Inc. / 2101 Ashland Avenue / P.O. Box 808 / Beatrice, NE 68310-0808 / Call 402.223.6300 / Fax 402.223.6384

Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may

vary in use, design, required attachments and safety features. We reserve the right to improve our products

and make changes in specifi cations, designs and standard equipment without notice and without incurring

obligation. See your dealer for details on all of our warranties.

Exmark ® , Turf Tracer ® , Lazer Z ® , Metro ® , Pioneer ® , Vantage ® , Phazer ® , Quest ® , Exmark Parts Plus ® , Navigator ® , and

UltraVac ® are registered trademarks, and Viking , UltraCut , Micro-Mulch and CustomRide are trademarks of

Exmark Mfg. Co., Inc.

Kohler ® is a registered trademark and Kohler ® Command is a trademark of Kohler Co. Kawasaki ® is a registered

trademark of Kawasaki Motors Corp. Turf Mate ® , Turf Master ® , Turf Saver ® and Multi-Trac ® are registered

trademarks of Carlisle Tire & Rubber Co.

Kubota ® is a registered trademark of Kubota Engine America Corp. Honda ® is a registered trademark of

American Honda Motor Co., Inc. Hydro-Gear ® is a registered trademark of Hydro-Gear.

© 2012 Exmark Manufacturing Company, Inc. All rights reserved. Printed in the U.S.A. 2012 Form No. 116-6520

2012


WHERE DOES PRIDE

COME FROM?

2 3


ADVANTAGE

IT COMES FROM THE DESIRE TO MAKE THE

LANDSCAPE MORE BEAUTIFUL.

EXMARK DIFFERENCE

If you’re an Exmark owner, chances are, you had a hand in building your machine. Whether you know it or not, you’re the reason the deck is deeper, the controls

are smoother and the parts are fewer.

Before we build machines, we go into the fi eld and ride

alongside our customers. We get sweaty. We get tired.

We get the best feedback. Then we gather our fi ndings

and get busy putting everything we learned into each

4 5

nut and bolt.

But that’s only part of the story. Our lines of communication

are always open. Along with our tireless poking and

prodding, we’re supported by our incredible customer

service department. Those guys always do us proud.

So if you want to tell people you help build the best

commercial-grade machines in the industry, go ahead.

It’s not too far from the truth.

ADVANTAGE


QUALITY

6

IT COMES FROM NEVER SETTLING, NOT

WITH ANYONE OR ANYTHING.

EXMARK COMMERCIAL QUALITY

If you’ve ever used an Exmark, then we don’t need to tell you that they’re high-quality, low-maintenance, commercial-grade machines. You already know from

experience that they’re exceedingly durable and incredibly productive. And that they require little maintenance.

If you’re reading this thinking, “Who is Exmark?” we invite

you to get to know us by test-driving one of our mowers.

Jump on. Fire it up. Take it in the fi eld. We’re confi dent

that you’ll be impressed.

If you have any questions, speak to one of our Exmark

dealers. And don’t be surprised if you’re impressed with

them as well. All of our dealers are straight-shooters who

take pride in helping pros any way they can. That’s why

we partner with them. And with a strong dealer network,

it shouldn’t be hard to fi nd a local one in your area. Then

you’ll get the full picture of why Exmark mowers are

preferred by pros more than any other brand.

7

QUALITY


THE CUT

8

IT COMES FROM THE TIRELESS PURSUIT

OF THE PERFECT CUT. CUT

CUTTING TECHNOLOGY

If you want to build the very best commercial-grade machines, start with the very best commercial-grade components. Exmark’s decks, hydro drive systems and

spindles are a testament to that. They make our mowers more durable—and more reliable and a heck of a lot more popular.

HYDRO DRIVE SYSTEM

Our hydro drive system is how most things should be:

painless. It’s exclusively designed to contain fewer parts

and pieces, reducing maintenance and increasing durability.

Take its unitized pump and wheel motor. They eliminate

hoses and potential leak points. And the tow valves can be

operated without the use of tools, not to mention that the

customized valving provides smooth control. Like we said,

painless.

DECK

It doesn’t matter how much experience you have. It doesn’t

matter how many hours you clocked in the fi eld. If the cut

doesn’t look good, you’re done. That’s why we worked hard

in perfecting our cutting decks. Let’s take a look inside:

The patented fl ow-control baffl es accelerate airfl ow under

the deck, resulting in the easy movement of materials and

a more even discharge. We’ve optimized the blade-tip

speed, which optimizes discharge distance and uniformity.

All the components in our deck work together to deliver a

standout cut, job after job after job.

SPINDLES

Meet the superheroes of spindles. Their superpowers lie

in their simplicity and durability. Made from tough cast

aluminum that houses sealed ball bearings, they can

withstand the effects of impact and moisture. They’re also

maintenance-free—yet another superpower.

9

THE CUT


RIDERS

10

A

®

QUEST

B C D

A high-quality threaded pneumatic tires for a smoother ride

B single-point rake adjust for easy deck adjustment

C wash-out port for easy cleaning

D exclusive Exmark fl oor mat for reduced vibrations

A RESIDENTIAL RIDER DESIGNED TO IMPRESS.

What happens when you come from a family of

overachievers? You do everything you can to get noticed.

Just like this zero-turn mower. The Quest delivers the kind

of cut that gets a major nod from the lawn enthusiast. It’s

designed for the guy who wants his yard to stand out in his

county, not just the neighborhood. Wherever the Quest

mows, it results in a million-dollar cut. You better believe

the Quest lives up to the family name.

MODELS INCLUDE:

Quest E-Series

Quest S-Series

CUT QUALITY:

The cutting deck works hard to deliver the the exclusive

Exmark cut in no time. It employs serious cutting

technology that banishes banishes stragglers and doublecutting.

It not only cuts grass beautifully, but also

cuts your mowing time, which is also a beautiful

thing.

SEAT:

On the Quest, comfort starts with the seat and

seating suspension. The coil spring seating system

provides a smooth ride over uneven terrain. Quest

users will fi nd that being comfortable while mowing

makes the task seem even shorter.

TRACTION AND HANDLING:

The Quest’s parts and pieces are arranged in its

frame in a way that optimizes traction with a lower

center of gravity, making it an incredibly smooth

ride. Its zero-turn technology will have you easily

maneuvering around the landscape, for an even

faster fi nish.

See pages 42 and 43 for Quest specs.

11

RIDERS


RIDERS

12

A B C D

®

PIONEER

A 7-gallon single-point fuel tank

B transport lock for convenient trailering

C bolstered seats with coil spring suspension

D greaseless spindles eliminate yearly greasing

A MOWER WITH A HEAD FOR NUMBERS.

It’s a given that all Exmark mowers are exceptional

machines that hold their value. But of the rider family lineup,

the Pioneer sets itself apart. It’s one heck of a workhorse

that has made its mark in the value price category. It delivers

precision, durability, comfort and traction with every job.

And, of course, one heck of a cut. Do the math and compare

for yourself. You’ll realize that no other similarly equipped

machine comes close to the Pioneer’s commercial-grade

performance and quality. After all, it’s an Exmark.

MODELS INCLUDE:

Pioneer E-Series

Pioneer S-Series

HYDRO-GEAR ® :

The Pioneer’s hydrostatic drive system makes the

Pioneer S-Series a smooth ride. The system includes

charge pumps, steel-cut gears and shock valves

that deliver years of reliable service.

CUTTING DECK:

This machine takes its job of cutting grass seriously.

It’s equipped with Exmark’s patented deep cutting

deck that improves cutting effi ciency and delivers

attention-grabbing results.

FRAME:

Fewer parts and pieces—that’s one of this

mower’s strengths. With a simplifi ed design and

a reduction in the number of moving parts, this

machine promises to be low in maintenance and

high in reliability. Really high.

See pages 44 and 45 for Pioneer specs.

13

RIDERS


RIDERS

14

A B

C D

®

LAZER Z

A rear-sloping ROPS bar defl ects branches from operator

B panhard rod used in race cars eliminates deck sway

C single-point height adjust matches cutting height on fl eet

D easy-to-read operator diagnostics

THE ONE AND ONLY LAZER Z.

Ever talk to a Lazer Z owner about his machine? No? In

conversation, owners usually throw out comments like,

“Best machine ever,” “It’s a workhorse. Just keeps going

and going,” “No way am I going to use anything else,”

and “Don’t even think about jumping on my machine.”

What causes them to make such strong statements? With

the Lazer Z, it could be a number of things. Like its simple

design, resulting in fewer parts and less maintenance.

And its undeniable cut quality that fosters pride from the

operator and envy from everyone else. And we can’t forget

about the increased comfort factor. See, so many things to

like about the Lazer Z.

Maybe you should ride one and chime in with your very own

strong statement.

MODELS INCLUDE:

Lazer Z E-Series

Lazer Z S-Series

Lazer Z X-Series

Lazer Z DS-Series (see next page).

•EFI units available •Propane units available

HYDRO DRIVE SYSTEM:

This system has no hoses, with reduced leak points

and only annual maintenance required. It also

boasts a serviceable pump and motor. When used

with exclusive Exmark hydro oil, it becomes even

more maintenance-free.

UNIBODY FRAME:

Studying automotive manufacturing helped us

construct this lighter and more durable frame.

With it, we can position the body lower to the

ground, improving improving center of gravity, balance and

traction in in most conditions. As an an added perk, it’s

made the machine easier to handle.

SEATING SYSTEM:

Forget the seat when you can have a seating

system. It has a 3-dimensional motion isolation

design that reduces vibrations, bumps and jarring.

And rubber mounts that allow 0.5-inch free

movement in all directions, resulting in a smoother

ride and a back that experiences less pain.

See pages 46 to 48 for Lazer Z specs.

15

RIDERS


RIDERS

16

A B C D

®

LAZER Z DS-SERIES

A radiator position and wavy screen ensure effi cient cooling

B canister air fi ltration system improves productivity

C iso-mounted diesel engine reduces vibrations

D welded, heavy-duty steel frame designed for extreme mowing conditions

RED AND GREY ON THE OUTSIDE,

GREEN ON THE INSIDE.

If you don’t believe that a mower can strike a balance

between commercial mowing and environmental

consciousness, then you haven’t met the Lazer Z diesel.

It’s a hard-working machine that’s ready to tackle the grass

but leave the environment intact. Its heavy-duty frame

and engine cooling system keep it from early retirement

so it can continue delivering a picture-perfect cut, even

under the toughest conditions. Its large drive tires optimize

traction and stability. So what you have here is a productive

machine that’s focused on doing its part in keeping the

planet beautiful.

LARGER DRIVE TIRES:

The Lazer Z diesel sports 4-ply Multi-Trac ® drive

tires that optimize traction and stability, for a

smoother ride over uneven ground.

SERIES 5:

Here’s a deck that’s affl icted with grass

perfectionism. Its Exmark-exclusive baffl e design

and deep platform make each blade of grass stand

at attention as the blades cut in unison, leaving no

stragglers behind.

SEAT SUSPENSION:

Comfort comes standard on this diligent worker.

Elastomeric Vibration Control (EVC) material and

suspension respond to bumps and jars, providing

better cushioning. Doing good for the environment

and doing good for your body—that’s just how this

mower rolls.

See page 49 for Lazer Z DS-Series specs.

17

RIDERS


RIDERS

18 18

A B C D

®

NAVIGATOR

A exclusive fi ll-reduction system provides bagging fl exibility

B full-fl oating deck design minimizes scalping

C feather-touch control system enhances precision

D independent gear-reduction wheel motors increase control

A MOWER THAT FITS IN ALMOST ANYWHERE,

INCLUDING ON HIGH-END PROPERTIES.

Owners of high-end properties are a particular bunch.

They want their lawns to be perfectly manicured. They want

each blade to be in place. And they don’t want to see any

grass clippings. The Navigator was designed for such a job.

With its exclusive Exmark deck and dedicated collection

system, it leaves behind nothing but that “straight out of

the pages of a magazine” lawn that customers demand.

But let’s not forget that this mower comes with all of the

advantages of being an Exmark, including better operator

comfort, higher ground speed and undeniable productivity.

Those are the kinds of benefi ts that impress a certain

discriminating customer—you.

•EFI units available

GEARBOX:

The splined PTO shaft, with its high-speed U-joints

and shear pins, provides complete blade drive

protection. And if you ever need to disconnect it,

a drive shaft coupling near the engine allows for

speedy removal.

DRIVE CONTROL SYSTEM:

Even with its large dedicated bagger in the back

and a hefty frame, the Navigator practically glides

over the landscape. Its exclusive control system

allows for smooth maneuverability, even at higher

mowing speeds.

COLLECTION SYSTEM:

Reduce emptying and job time with the large

9.5-bushel hopper. Attached is a discharge diffuser

with an exclusive baffl e design that more evenly

fi lls the hopper from rear to front. Even better, the

18% higher blade tip speed slices grass into fi ner

particles, increasing the hopper’s load.

See page 50 for Navigator specs.

19

RIDERS


RIDERS

20

A B C D

®

VANTAGE

rubber heat shield separates user from drive system heat

heavy-duty muffl er guard reduces muffl er wear and tear

UltraCut A

B

C

deck ensures beautiful results with each pass

D adjustable rear tire stance improves stability

RISE ABOVE.

If you’re a stand-on kind of guy, then here’s a mower that

stands out from the rest. With its large operator platform

and ergonomic levers, the Vantage is designed to keep

you comfortable all day as you move from job to job to job.

But comfort isn’t the only benefi t going for it. It’s chock-full

of everything that’s characteristically Exmark: durability,

reliability, ruggedness, superior traction and handling.

Of course you can’t forget about the kind of cut it delivers—

a cut that gives your goose bumps goose bumps.

•EFI units available

OPERATOR PLATFORM:

The Vantage’s superior weight distribution and

larger, rubber platform with self-compensating

suspension allows pros of all shapes and sizes to

stand in comfort. And if you feel like stretching your

legs, the platform folds up, turning the stand-on

into a walk-behind.

STEERING SYSTEM:

The ergonomically designed control system,

called the Limited Variable Speed bar, includes

an adjustable front reference bar that can vary

the top-end speed of the machine. The sides

of the controls are angled to accommodate the

natural position of the hands and wrists.

TRACTION AND HANDLING:

For better weight distribution, the heaviest

components are positioned in the front while the

operator stands behind the tires. The mower’s wide

stance allows the operator to shift his body weight

in response to the changing landscape, making it a

smoother ride over varying terrain.

See page 51 for Vantage specs.

21

RIDERS


SPECS

22

RIDING

MOWERS

MODEL NAME Quest E-Series Quest S-Series Pioneer E-Series Pioneer S-Series Lazer Z E-Series Lazer Z S-Series

DECK SIZE 42” 50” 50” 48” 52” 44” 48” 52” 60” 48” 52” 60” 48” 52” 60” 72”

ENGINE BRAND Kawasaki ® V-Twin Kawasaki V-Twin Kawasaki V-Twin Kohler ® Command Kohler Command Kawasaki V-Twin Kohler Command Kawasaki V-Twin Kohler Command Kawasaki V-Twin Kohler Command Kohler Command Kohler Command EFI Kawasaki V-Twin Kohler Command EFI Kawasaki V-Twin Kawasaki V-Twin

ENGINE MODEL FR651V FR691V FR691V FR651V FR691V FX600V FX651V CV680 CV740 FX600V FX691V CV740 FX651V CV680 FX691V CV740 CV740 ECV730 FX801V–Propane ECV749 FX801V FX801V–Propane

CHASSIS Unibody • Riveted 10-ga. steel Unibody • Welded • Heavy-duty 2" square tubular steel Unibody • Welded • Heavy-duty 2" square tubular steel Unibody • Welded • Heavy-duty 1.5" x 3" Tubular steel Unibody • Welded • Heavy-duty 1.5" x 3" tubular steel

DECK SYSTEM Exmark Series 1 • Stamped steel deck • 4" deep •

Cutting heights from 1.5"–4.5"

•EFI unit

•Propane unit

Exmark Series 2

fabricated steel deck •

4" deep • Cutting heights

from 1.5"–4.5"

UltraCut Series 4 • 4" deep deck • Cutting heights

from 1.5"– 5" • Hex-style spindle blade driver • Chain

support and transport lock

UltraCut Series 3 • 5.0" deep deck • Cutting heights from 1.5"– 5" • Wide-fl ange

cutter housings with spindle driver • Chain support and transport auto-lock

UltraCut Series 4 •

4" deep deck • Cutting

heights from 1.5"–5" •

Hex-style spindle blade

driver • Chain support

and transport lock

UltraCut Series 4 • 5.5" deep deck • Cutting heights from 1"–4.5" • Wide-fl ange

cutter housings with spindle driver • Chain support and transport auto-lock •

Single-point, fi nite height adjustment

PTO 80 ft-lbs 125 ft-lbs 125 ft-lbs 125 ft-lbs 175 ft-lbs 175 ft-lbs 200 ft-lbs 200 ft-lbs

SPEED 0-7 mph 0-7 mph 0-7 mph 0-8 mph 0-9 mph 0-8 mph 0-10 mph

DRIVE SYSTEM ZT2100 Integrated

transmission

ZT2200 Integrated

transmission

ZT2800 Integrated

transmission

FUEL CAPACITY 2.9-gallon • Single fi ll location 2.9-gallon •

Single fi ll location

SEAT High-back foam

padded seat

Commercial-grade

high-back seat

Commercial-grade

high-back seat

DRIVE TIRES 18 x 7.5-8 • 4-ply Turf Tech TL 20 x 8-10 • 4-ply Turf

Master ®

FRONT CASTER TIRES 350/410 x 4 Smooth tread •

Pneumatic

13 x 5 ribbed tread •

Pneumatic

13 x 5 Ribbed tread •

Pneumatic

ZT2800 Integrated transmission ZT3100 Integrated transmission Dual Hydro Gear ZT3400,

hydro-static transmission

UltraCut Series 4 • 5.5" deep deck • Cutting heights from 1"–5.5" • Standard-duty cutter housings • Wide-fl ange cutter housings with spindle driver • Chain support with side spring and transport auto-lock • Single-point, fi nite height adjustment • Patented deck support struts

Exmark exclusive Parker unitized pump and wheel motors • No hoses–12cc pumps Exmark exclusive Parker unitized pump and wheel motors • No hoses • Integrated cooling fans–12cc pumps

7-gallon • Single fi ll location 7-gallon • Single fi ll location 8-gallon • Single fi ll location 12-gallon • Single fi ll location 8-gallon capacity 10.3-gallon propane tank 12-gallon • Single fi ll location 10.3-gallon propane tank

Commercial-grade high-back seat Commercial-grade high-back seat Commercial-grade high-back seat Deluxe, two-tone bolstered seat with Elastomeric Vibration Control (EVC) material

20 x 8-10 Turf Master 22 x 9.5-12 Kenda Tires 23 x 10.5-12 Kendra 22 x 9.5-12 Turf Master 23 x 10.5-12 Turf Master 23 x 9.5-12 • Turf Master 24 x 12-12 • Turf Master

13 x 5-6 • Smooth-tread • Pneumatic 13 x 5-6 • Smooth-tread • Pneumatic 13 x 5.0-6 • Smooth-tread •

Pneumatic

12 x 5-6 • Smooth-tread • Pneumatic 13 x 5.0-6 • Pneumatic 13 x 5.0-6 • Smooth-tread • Semi-pneumatic 13 x 6.5-6 • Smooth-tread •

Semi-pneumatic

INSTRUMENTATION Optional hour meter Optional hour meter Standard hour meter Standard hour meter Operational diagnostics • Integral fuel gauge and hour meter Operational diagnostics • Integral fuel gauge and hour meter

MODEL # QTE651KA421 QTE691KA501 QTS691KA502 PNE651KA482 PNE691KA522 PNS600KA443 PNS651KA483 PNS680KC523 PNS740KC604 LZE600KA484 LZE691KA524 LZE740KC604 LZS651KA484

LZS651KA484CA

LZS680KC524 LZS691KA524CA LZS740KC524 LZS740KC604CA

LZS740KC604

23

13 x 5.0-6 • Smooth-tread • Semi-pneumatic 13 x 6.5-6 • Smooth-tread • Semi-pneumatic 13 x 5.0-6 • Smooth-tread •

Semi-pneumatic

LZS730EKC604 LZS801PKA604 LZS749EKC724 LZS801KA724 LZS801PKA724

SPECS


SPECS

RIDING

MOWERS

MODEL NAME Lazer Z X-Series Lazer Z DS-Series Navigator Navigator Decks Vantage

DECK SIZE 48” 52” 60” 72” 60” 72” 42” 48” 36” 48” 52” 60”

ENGINE BRAND Kohler ® Command Kohler Command Kohler EFI Kawasaki ® V-Twin Kohler Command Kohler Command Kubota ® Diesel Kohler Command Kohler Command EFI Kawasaki V-Twin Kawasaki V-Twin Kawasaki V-Twin Kohler EFI Kohler EFI

ENGINE MODEL CV680 CV740 CV740 ECV749 FX801V CV940 • CV980 CV940 • CV980 D902 CV640 • CV740 ECV730 FS541V FS651V FS691V FS691V ECV730 ECV740

CHASSIS Unibody • Welded • Heavy-duty 1.5" x 3" tubular steel Welded • Heavy-duty tubular steel Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing

with a ground clearance of 4.0" • Strategically located,

continuous-force counterweight springs

DECK SYSTEM UltraCut Series 6 • 5.5"-deep deck • Cutting heights from 1"– 5.5" • Premium, heavy-duty cutter housings • Heavy-duty support with side spring and transport auto-lock

Single-point, fi nite height adjustment • Patented deck support struts

Series 5 • 6" deep deck • Cutting heights from 1"– 5" • Premium,

heavy-duty cutter housings • Heavy-duty support with dual side

springs and transport lock

Full fl oating rear-discharge cutting deck with heavy duty gear

driver • Spindle assembly • Cutting heights 1"– 4"

Welded • Heavy-duty 1.5" x 3" Tubular steel

UltraCut Series 3 •

5" deep deck • Cutting

heights from 1"– 5"

UltraCut Series 4 • 5"-deep deck • Cutting heights from 1"– 5"

PTO 200 ft-lbs 200 ft-lbs 200 ft-lbs 200 ft-lbs 250 ft-lbs 250 ft-lbs 250 ft-lbs 6” brake band 175 ft-lbs 200 ft-lbs

SPEED 0-10 mph 0-11.5 mph 0-12 mph 0-7 mph 0-8 mph

DRIVE SYSTEM Exmark-exclusive Parker unitized pump and wheel motors •

No hoses • Integrated cooling fans–12cc pumps

Exmark-exclusive Parker unitized pump and wheel motors • No hoses • Integrated cooling fans–16cc pumps Dual Hydro-Gear ® 21cc pumps power •

18-cubic-inch wheel motors

Dual Hydro-Gear 12cc variable-displacement pumps power •

Hydro-Gear planetary reduction motors

FUEL CAPACITY 12-gallon • Single fi ll location 15.5-gallon twin fuel tanks 7.5-gallon • Pivoting tank 8-gallon • Single fi ll location

SEAT Deluxe, two-tone bolstered seat with Elastomeric Vibration Control (EVC) material • Innovative Seat Isolation System (SIS) • Fore and aft adjustment from operator’s position with seat fl ip-up* Hinge-mounted, deluxe, two-tone, bolstered full-suspension

seat with Elastomeric Vibration Control (EVC) material •

Adjusts to individual operator weight, and features padded,

height-adjustable armrests

High-back, Elastomeric Vibration Control (EVC) seat

Two Hydro-Gear 10cc pumps powering two Parker 12-cubic-inch motors

DRIVE TIRES 24 x 9.5-12 • 4-ply Multi-Trac ® 24 x 12-12 • 4-ply Multi-Trac 26 x 12-12 • 4-ply Multi-Trac 18 x 10.5-10 Multi-Trac C/S 18 x 8.5-8 Kenda ® Tires 20 x 10.5-8 Kenda Tires

FRONT CASTER TIRES 13 x 5.0-6 Smooth-tread • Semi-pneumatic tires 13 x 6.5-6 Smooth-tread • Semi-pneumatic tires 13 x 6.5-6 Smooth-tread • Semi-pneumatic tires 8 x 3-4 Semi-pneumatic 11 x 4-5 • Smooth-tread •

Semi-pneumatic tires

INSTRUMENTATION Operational diagnostics • Integral fuel gauge and hour meter Mechanical fuel gauge • Standard hour meter Translucent visual fuel indicator Standard hour meter

MODEL # LZX680KC486 LZX740KC526 LZX740KC606

LZX740KC606CA

•EFI unit

*LZX801KA606SS, LZX940KC606, LZX940KC724, LZX980KC606, and LZX980EKC726 have a suspension seat.

LZX749EKC606 LZX801KA606

LZX801KA606SS

LZX940KC606

LZX980KC606

24

LZX940KC726

LZX980KC726

LZDS902K605 LZDS902K725 NV640KC

NV740KC

NV730EKC CD42CD CD48CD VT541KA363CA

VT541KA363

11 x 4-5 • Smooth-tread • Semi-pneumatic tires

VT651KA484 VT691KA484CA VT691KA524

VT691KA524CA

VT730EKC524 VT740EVC604

25

SPECS


ECS CONTROLS

26

EASY ON THE HANDS. Our

ECS CONTROLS

Let’s face it, the comfort of the operator’s hands isn’t the fi rst thing you think of when you think walk-behinds. But we couldn’t forget about the hands, considering,

in this case, they do just as much work as the operator’s legs and feet.

patented Enhanced Control System (ECS) walk-behinds

place the handles where your hands naturally fall, which also

helps protect them from hitting objects that stick out.

The shorter grip distance and drive levers relieve fatigue

while the cushioned handles reduce vibration. It’s total

comfort for hard-working hands.

27

ECS CONTROLS


WALK-BEHINDS

28

A

B

COMMERCIAL 21

C

D

A redesigned handle mount improves ergonomics

B multipurpose blade allows for cutting fl exibility

C infi nitely variable drive speeds for more control

D automotive-grade polymer wheels for increased reliability

EXPECT BIG THINGS FROM THIS COMPACT MOWER.

Don’t let its smaller size fool you. The Commercial 21 is a

heavy-duty, full-feature trim and fi nish mower. It’s built to

last and it delivers Exmark’s signature quality cut quickly

and effi ciently. Its simple design means that it has fewer

parts, resulting in reduced maintenance, fewer failures and

absolutely no grease points. Even its height adjustment

function is simple, eliminating the need for pivot-style

adjusters. And as for the bagger, it’s easy to take off and put

on, doing away with levers and headaches. That translates

to less time emptying and more time mowing.

MODELS INCLUDE:

Commercial 21 S-Series

Commercial 21 X-Series

BAGGER:

Easy to remove and easy to put back on, the

bagger eliminates the need for levers and

reduces headaches. It allows you to quickly

empty it and get back to the job at hand.

HEIGHT ADJUST:

The mower’s innovative and durable front

height adjust means there there are no pivot-style

adjusters to deal with.

FRAME:

With 60% fewer parts than anything in its class,

you can expect less downtime and a lot more

mowing time. And with absolutely no grease

points, maintenance becomes less of a concern.

See pages 52 and 53 for Commercial 21 specs.

29

WALK-BEHINDS


WALK-BEHINDS

30

A B

C D

WIDE-AREA

WALK-BEHINDS

A ECS lessens fatigue and provides greater comfort

B drive belt service requires no tools

C superior clipping dispersal with molded discharge chute

D smooth-tread semi-pneumatic caster tires reduce repair

GOOD NEWS: YOUR SEARCH FOR THE BEST

WALK-BEHIND JUST ENDED.

Large properties. Small properties. Tight spaces. Ornate

landscaping. Whether you’re looking for a large walk-

behind with all of the bells and whistles or something a

bit more modest, this is the family to turn to. All Exmark

walk-behinds are designed to be incredibly productive,

delivering a one-of-a-kind cut with each pass. These

machines are built to last, taking on the toughest mowing

conditions without breaking a sweat. They’ll have you easily

maneuvering on hillsides, around fl ower beds, and anything

else that can end up on the lawn.

MODELS INCLUDE:

Metro ®

Viking Turf Tracer ® S-Series

Turf Tracer X-Series

•EFI units available •Propane units available

ECS:

Exmark’s patented Enhanced Control

System comes standard on many widearea

walk-behinds. It lessens fatigue

and provides greater comfort to the

operator’s hands, arms and back.

DRIVE BELT:

The drive belt is designed to be hassle-free.

It can be easily and quickly changed without

the need for a single tool.

DRIVE TIRES:

The drive tires provide unmatched stability and

maneuverability, giving you the freedom to move

over uneven terrain with incredible ease.

See pages 55 to 58 for wide-area walk-behind specs.

31

WALK-BEHINDS


SPECS

32

WALK-BEHIND

MOWERS

MODEL NAME Commercial 21 S-Series Commercial 21 X-Series Metro 26 Metro Viking Turf Tracer S-Series Turf Tracer X-Series Turf Tracer X-Series Decks

DECK SIZE 21” 21” 26” 32” 36” 48” 36” 48” 36” 48” 52” 52” 60”

ENGINE BRAND Kawasaki ® KAI Honda ® GXV Kawasaki KAI Kawasaki KAI Kawasaki V-Twin Kawasaki V-Twin Kawasaki V-Twin Kawasaki V-Twin Propane Kawasaki V-Twin Kohler ® Command Kawasaki V-Twin Kohler Command EFI Kawasaki V-Twin Propane

ENGINE MODEL FJ180V GXV160 FJ180V FJ180V FS481V FS481V FS481V FS481V FS600V FS600V FS541V FS600V CV640 ECV650 FX691V FX691V

DECK SYSTEM 0.25"-thick die-cast

aluminum • 5"-deep •

Cutting heights 1"– 4.5"

in 0.5" increments”

•EFI unit

•Propane unit

0.25"-thick die-cast aluminum • 5"-deep •

Cutting height 1"– 4.5" in 0.5" increments

0.25"-thick die-cast

aluminum • Cutting height

1"– 4" in 0.5" increments

Full-fl oating, 5"-deep deck • Cutting height 1"– 4.25" Full-fl oating, 5"-deep deck • Cutting height 1"– 4.25" Full-fl oating, 5"-deep deck • Cutting height 1"– 4.5" UltraCut Series 4 • 4"-deep deck • Cutting heights from

1.5"– 5" • Hex-style spindle blade driver • Chain support

and transport lock

SPEED 0-4.2 mph 0-4.1 mph 0-6.2 mph 0-6.2 mph 0-6.2 mph 0-6.75 mph

SPEED CONTROL BBC fi ngertip bail control Standard pistol-grip • Available Enhanced Control System (ECS) Enhanced Control Systems (ECS) Enhanced Control System (ECS) Enhanced Control System (ECS)

PTO Lever-actuated blade engagement with blade brake Mechanical blade engagement with blade brake Mechanical blade engagement with blade brake Electromagnetic 200 ft-lbs clutch

DRIVE SYSTEM Hand-push Self-propelled • Rear-wheel gear-driven Self-propelled •

Rear-wheel gear-driven

Single-belt drive Dual-belt drive Dual Hydro-Gear variable-displacement pumps Dual Hydro-Gear variable-displacement pumps Dual Hydro-Gear variable-displacement pumps

DRIVE TIRES 9" x 2.5" • Semi-pneumatic 9" x 2.5" • Semi-pneumatic 10 x 3-7 • Semi-pneumatic 13 x 5-6 • 4-ply Turf Saver ® 13 x 6.5-6 • 4-ply Turf Master ® 13 x 6.5-6 • 4-ply Turf Master 16 x 6.5-8 • 4-ply Turf Master 18 x 8.5-8 • 4-ply Turf Master

FRONT CASTER TIRES 9 x 3.5-4 • Smooth-tread • Semi-pneumatic 9 x 3.5-4 • Smooth-tread • Semi-pneumatic 9 x 3.5-4 • Smooth-tread • Semi-pneumatic 11 x 4-5 • Smooth-tread • Semi-pneumatic

PARKING BRAKE Standard brake bands Lever-actuated mechanical compression Lever-actuated mechanical compression Lever-actuated mechanical compression

MODEL ECSKAP21

ECSKA21

ECXHN21

ECXHNBBC21

ECXKA21

ECXKABBC21

MSKABBC26 MG481KA322P MG481KA362

MG481KA362P

MG481KA362CA

MG481KA483P

MG481KA483

MG481KA483CA

VH481KA362

VH481KA362CA

VH481KA483

VH481KA483CA

TTS481KA363

TTS481KA363CA

TTS481KA483 TTS600KAE483 TTS600PKAE483 TTS541KA523 TTS600KAE523 TTX640KCE TTX650EKCE TTX691KAE

TTX691KAECA

33

TTX691PKAE FMD524 FMD604

SPECS


UNIT TYPE COMMERCIAL WARRANTY CONSUMER WARRANTY

commercial riders & front-mount decks

Lazer Z ® DS-Series & Navigator ® 2 Years, Limited 2 Years, Limited

WARRANTY EXCEPTIONS

Bags, Belts and Tires

Battery

Engine*

90 Days

1 Year, Prorated

2 Years**

90 Days

1 Year, Prorated

2 Years**

Lazer Z X-Series, Lazer Z S-Series & Vantage ® 3 Years, Limited 5 Years or 750 Hours, Limited

WARRANTY EXCEPTIONS

Bags, Belts and Tires

Battery

Engine*

90 Days

1 Year, Prorated

2 Years–Kawasaki ®

2 Years–Kohler ® **

90 Days

1 Year, Prorated

3 Years–Kawasaki

2 Years–Kohler**

Lazer Z E-Series 2 Years Limited 4 Years or 500 Hours, Limited

WARRANTY EXCEPTIONS

Bags, Belts and Tires

Battery

Engine*

90 Days

1 Year, Prorated

2 Years–Kawasaki

2 Years–Kohler

90 Days

1 Year, Prorated

3 Years–Kawasaki

2 Years–Kohler

Pioneer ® S-Series 2 Years, Limited 4 Years or 500 Hours, Limited

WARRANTY EXCEPTIONS

Bags, Belts and Tires

Battery

Engine*

90 Days

1 Year, Prorated

2 Years

90 Days

1 Year, Prorated

3 Years

Pioneer E-Series 1 Year, Limited 4 Years or 500 Hours, Limited

WARRANTY EXCEPTIONS

Bags, Belts and Tires

Battery

Engine*

90 Days

1 Year, Prorated

2 Years

90 Days

1 Year, Prorated

3 Years

Quest ® E-Series & Quest S-Series 30 Days, Limited 3 Years, Limited

WARRANTY EXCEPTIONS

Bags, Belts and Tires

Battery

Engine*

walk-behinds

90 Days

1 Year, Prorated

2 Years

Commercial Walk-Behinds (excludes 26" & 21") 2 Years 2 Years

26" & 21" Mowers 1 Year 1 Year

accessories

90 Days

1 Year, Prorated

3 Years

Attachments and Accessories (except as noted below) 1 Year, Limited 1 Year, Limited

Striping Roller & Operator-Controlled Discharge 90 Days 90 Days

Quest Attachments and Accessories 30 Days, Limited 1 Year Limited

miscellaneous

Engine*

Warranty is covered by

engine manufacturer

Peerless 5-Speed Transmission 2 Years (extended 21 months beyond

manufacturer’s warranty of 90 days)

Bags, Belts and Tires 90 Days 90 Days

(One-time pick-up and delivery allowed)

(One-time pick-up and delivery allowed)

Warranty is covered by

engine manufacturer

2 Years (extended 21 months beyond

manufacturer’s warranty of 90 days)

Battery 1 Year, Prorated 1 Year, Prorated

WE’VE GOT

YOU COVERED

OEM PARTS

Exmark parts are engineered to work with

every other part to deliver the kind of power

and performance required to maximize your

productivity. So when you need a part for your

Exmark zero-turn or walk-behind, go original.

EXMARK PARTS PLUS ®

If a dealer does not have in stock the Exmark part

you need, we will have it available to you on the

next business day, or the part is free! Our Parts

Plus program is just another way to ensure that

your machine achieves maximum uptime. †

your machine achieves maximum uptime. †

your machine achieves maximum uptime.

INDUSTRY-LEADING WARRANTY

When you purchase an Exmark zero-turn or

walk-behind mowing system, you can buy with

confidence, because it’s backed by Exmark’s

industry-leading warranty.

See your local Exmark dealer for complete warranty details.

† Restrictions apply; please contact your Exmark dealer for further

details. Dealer participation is optional. Program not available in

Hawaii and Canada.

* Please refer to the engine manufacturer’s warranty statement.

We are not authorized to handle warranty adjustments on engines.

This warranty only includes the cost of parts and labor.

** Kohler-powered EFI units offer a 3-year commercial warranty.

WARRANTY

COLLECTION SYSTEMS

34

ULTRAVAC ® S-SERIES 3-BAGGER

ULTRAVAC X-SERIES

ULTRAVAC E-SERIES

• Power and durability in one low-cost package.

• Commercial-grade, cloth mesh bags with

reinforced bottoms.

• Full 8.0-bushel commercial capacity.

• 5-blade, 0.25-inch, abrasion-resistant steel

impellers provide the power you’ll need.

• Sealed, non-greaseable impeller bearings for

longer life.

ULTRAVAC X-SERIES

• Discharges grass quickly with one simple

motion of the release lever.

• UltraVac X-Series commercial-grade steel and

polyethylene hopper with rear-discharge door

(7 bushels or 11 bushels).

See pages 59 to 61 for full specs and fi t-up information.

ULTRAVAC S-SERIES

• Quick-attach design enables easy switching

from bagging to side-discharge without tools.

• Larger-diameter, smooth-discharge tube

handles volumes of debris with less clogging.

• Compact design minimizes trailer space for

easy maneuverability.

• Sealed hood reduces dust around engine

and operator.

• Three UltraVac 32-gallon (13.4 bushels)

collection bags. Available on select models.

• Two UltraVac 32-gallon (8 bushels)

collection bags.

NON-POWERED COLLECTION SYSTEMS

• Simple, effective design and ease of installation.

• Larger-diameter, smooth-bore discharge tubes

for uninterrupted flow from deck to hopper.

• Sturdy, large-capacity collection bags.

• Durable, injection-molded hood.

• Quick-attach deck boot.

• Streamlined design enables better trimmability.

• Low profile to get under obstacles easier.

®

POWER DECK LIFT

Change your deck from any cutting height to the transport position quickly and easily,

with a convenient foot pedal actuator switch that lets you keep your hands safely on the

drive levers. Created specifically for your 48"–72" cutting deck Lazer Z, its electronic motor

features Exmark’s signature durability and a low-profile design that leaves plenty of trailer

space. (Fits only 2010 model year.)

HELLA ® WORK LAMP KIT

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this

Hella Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel

dust, withstand impact and can even take on high-pressure cleaning. With twice the

illumination output of a conventional work lamp, the kit also features a pivot base and

easy bulb replacement.

EQUIPMENT COVER

Protect your zero-turn mower from the elements with this sturdy, waterproof cover.

It’s constructed from tough 600-denier polyester, making it abrasion- and tear-resistant.

Its elastic opening provides a secure, snug fit. See dealer for fit-up information.

Two sizes:

Small (116-1378) – Fits Quest units.

Large (116-1379) – Fits all Lazer Z and Pioneer units.

Does not fit 72" units.

TRASH CONTAINER

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon

capacity and a durable, easy-to-clean mesh receptacle. See dealer for fit-up information.

RIDING

MOWERS

JACK AND RECEIVER

Safely access the underside of your zero-turn

mower’s deck. Jack attaches for smooth lift

without hassle or strain, thanks to the comfortable,

ergonomic design. Built for years of reliability.

Fits most Lazers, Vantage, Pioneer and Quest.

SEAT ISOLATION SYSTEM

Reduces operator fatigue with a 3-dimensional,

motion-isolation layout. Its rubber mounts allow

0.5-inch free movement in all directions, resulting

in 12-hour days that feel more like 6. Fits most Lazer

Z models.

35

ACCESSORIES


ACCESSORIES

36

RIDING

MOWERS

NAVIGATOR ® QUICK-HITCH ATTACHMENT SYSTEM

This hitch system replaces the mowing deck and

makes it easy to connect and remove attachments.

Blower or blade attachments can be utilized from

operator controls.

NAVIGATOR DUMP TUBS

Debris can be quickly and conveniently managed

with our two polyethylene tub inserts. These

removable tubs enable the weight of a full,

9.5-bushel hopper to be split and unloaded one

tub at a time.

NAVIGATOR BLADE

Featuring a 48" width, the snow blade can be angled 20° either right or left. It utilizes a

ground scraper constructed of carbon steel that is reversible, to double its productivity.

Requires Quick-Hitch Attachment System and fits up without tools.

NAVIGATOR SNOW BLOWER

48" in width and constructed of lasting 12- and 16-gauge steel, this heavy-duty,

two-stage blower attachment features a high-speed, 4-blade impeller. Blower

controls and rotational chute are easily maneuvered from the operator’s seat.

Requires Quick-Hitch Attachment System and fits up without tools.

CUSTOMRIDE SYSTEM

A great value in comparison to more expensive full-suspension seats, our CustomRide

suspension system easily mounts to your existing EVC operator seat. System features

enable operator to customize suspension settings to their individual weight and personal

preference. Fits all Lazer Z ® models.

12-VOLT POWER ADAPTER

Conveniently located for ease of use. Great for phone chargers or any other operator

comfort accessory. (Phone not included.)

ADDITIONAL RIDING MOWER ACCESSORIES

FULL-SUSPENSION SEAT

Designed to fit all Lazer Z

models, this low-profile,

full-suspension seat

enhances operator comfort

and lumbar support by

adjusting to individual

weight and preferred

seat-back angle.

SUN SHADE

Easily mounts to Rollover

Protection System (ROPS).

Made of heavy-duty,

water-repellent canvas

for maximum durability.

Easily removable for

transport. Fits all Lazer

Z and Pioneer ® models.

Does not fit Quest. ®

Does not fit Quest. ®

Does not fit Quest.

COMMERCIAL 21 WHEEL WEIGHT KIT

Enhance your productivity in wet conditions. Each wheel plate weighs 3 pounds to give you

excellent performance, even with a full load of grass.

COMMERCIAL 21 DECK WEAR KIT

Prolong the life of your deck in the toughest conditions with this heavy-duty deck wear kit.

3-BUSHEL BAGGER

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer,

Vantage ® and all wide-area walk-behinds.

WALK-BEHIND

MOWERS

COMMERCIAL 21 9.5"-DIAMETER WHEELS

For extended cut height, tough terrain or when

reduced rolling resistance is needed, this largerdiameter

wheel kit improves your productivity.

EXMARK STANDON

Increase productivity while reducing workload

with this pull-behind sulky. Uses an innovative

QuikMount system, and convenient, spring-loaded

latch. Expanded operator deck with foot guard for

safer, more comfortable riding.

37

ACCESSORIES


ACCESSORIES

38

WALK-BEHIND

MOWERS

COMMERCIAL 21 GAS TANK

Maximize your mowing with increased fuel

capacity. The 1-gallon gas tank fits easily onto your

engine to provide optimum productivity. Available

for ECSKAP21 and ECSKA21 models.

WALK-BEHIND WEIGHT SET

Add weight to the front end of your Exmark walkbehind.

Enhance stability and control when using

Exmark StandOn. Comes in pairs. Each weighs

9.5 pounds. Excludes Turf Tracer ® X-Series.

COMMERCIAL 21 ENGINE GUARD

Protect your engine from impact when mowing around low-hanging branches and

other obstacles.

COMMERCIAL 21 MULCH PLUG

Easily transition from bagging to mulching.

METRO ® 26 SIDE-DISCHARGE CHUTE

Quickly change from rear-bagging to side-discharge.

METRO 26 MULCH KIT

Easily transition from bagging to mulching.

OPERATOR-CONTROLLED DISCHARGE

The infinitely adjustable blocker door opens and closes, allowing user to quickly control

discharge when mowing around parked cars and windows. Easily installs and removes

without tools.

EXMARK PREMIUM HYDRO OIL

Designed for today’s more demanding hydraulic systems to enhance control performance.

Delivers superior anti-wear protection and twice the shear stability of competing oils.

EXMARK PREMIUM ENGINE OIL

Using a synthetic formulation that is far more stable and robust than inexpensive oil from your

local auto parts store or big retail outlet, Exmark premium is the right choice for your mower.

HYDRO MAINTENANCE KIT

Kit includes:

• 4 bottles Exmark Premium hydraulic oil

• 1 belt

• 2 hydro filters

ALL

MOWERS

EXMARK TURF STRIPER

Allows you to mow and stripe at the same time.

Installs quickly, using existing mounting points.

Easily adjusts for varying cutting height settings.

Does not affect your ability to get up and over curbs.

MICRO-MULCH SYSTEM

The aerodynamically designed deck, baffles and

blades create airflow patterns that circulate leaves

and grass for repeated cuttings and even dispersal

deep into the turf. Mulching baffles also keep the

underside clean, which reduces grass buildup

and clumping.

39

ACCESSORIES


PRODUCTIVITY

40

PRODUCTIVITY AND INCREDIBLE

VALUE COME STANDARD.

COST OF OWNERSHIP AND PRODUCTIVITY

They’re tough. They’re reliable. They’re efficient. They’re low-maintenance. It’s exactly what you want in your mowers. Exmark mowers are engineered to start

working and stay working, reducing downtime and overall operating expense, which makes them more valuable than their sticker price. And with each passing

year, their value gets even higher.

As a landscape professional, the investment you make in

original equipment doesn’t impact your bottom line as

much as other operational costs. As a matter of fact, with

Exmark mowers’ high performance and low maintenance,

you’ll be saving time and money in the long run.

FUEL

9%

EQUIPMENT

16%

LABOR

50%

MAINTENANCE

15%

DOWNTIME

10%

75% of a landscape

professional’s mowing

costs comprise labor,

downtime and maintenance.

MPH

REDUCED COST OF OWNERSHIP

Owning an Exmark increases your profits through:

• Maximized productivity per employee.

• Minimized downtime losses.

• Reduced in-house shop costs.

• Decreased repair costs.

• Increased focus on customer sales and marketing.

• Better retention of strong employees.

• Higher equipment resale value.

RIDER ACRES-PER-HOUR PRODUCTIVITY

Efficiency at 100% and 80%*

EXAMPLE:

20% more acres per hour (from 5–6 mph)

@ $40.00 per hour = $8.00 per hour.

180 working days per year x 5 hours per day

= 900 hours x $8.00.

= $7,20 0 per year.

20% revenue increase per hour.

34" Width 42" Width 48" Width 52" Width 60" Width 66" Width 72" Width

100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80%

1.5 0.52 0.41 0.64 0.51 0.73 0.58 0.79 0.63 0.91 0.73 1.00 0.80 1.09 0.88

2.0 0.69 0.55 0.85 0.68 0.97 0.78 1.05 0.84 1.21 0.97 1.33 1.06 1.45 1.16

2.5 0.86 0.69 1.06 0.85 1.21 0.97 1.31 1.05 1.52 1.21 1.67 1.33 1.83 1.45

3.0 1.03 0.82 1.27 1.02 1.45 1.16 1.58 1.26 1.82 1.45 2.00 1.60 2.19 1.74

3.5 1.20 0.96 1.48 1.19 1.70 1.36 1.84 1.47 2.12 1.70 2.33 1.86 2.54 2.04

4.0 1.37 1.10 1.70 1.35 1.94 1.55 2.10 1.68 2.42 1.94 2.67 2.13 2.90 2.33

5.0 1.72 1.37 2.12 1.69 2.42 1.94 2.63 2.10 3.03 2.42 3.33 2.66 3.64 2.90

6.0 2.06 1.65 2.55 2.03 2.91 2.33 3.15 2.52 3.64 2.91 4.00 3.19 4.37 3.49

7.0 2.40 1.92 2.97 2.37 3.39 2.72 3.68 2.94 4.24 3.40 4.67 3.73 5.05 4.08

8.0 2.75 2.19 3.39 2.71 3.88 3.10 4.20 3.36 4.84 3.88 5.33 4.26 5.80 4.66

8.5 2.92 2.33 3.61 2.88 4.12 3.29 4.46 3.57 5.15 4.11 5.67 4.52 6.18 4.94

9.0 3.09 2.47 3.82 3.05 4.36 3.48 4.73 3.77 5.46 4.35 6.00 4.79 6.53 5.23

9.5 3.26 2.60 4.03 3.22 4.61 3.68 4.99 3.98 5.76 4.59 6.33 5.06 6.90 5.52

10.0 3.43 2.74 4.24 3.39 4.85 3.87 5.25 4.19 6.06 5.00 6.67 5.32 7.27 6.00

11.0 3.78 3.02 4.67 3.73 6.66 5.33 7.33 5.85 8.02 6.42

12.0 4.12 3.29 5.09 4.06 7.27 5.81 8.00 6.39 8.73 6.97

* Two productivity ratings are shown: one at 100% and one at 80% efficiency. Many manufacturers use 100% efficiency ratings for sales purposes.

Exmark believes an 80% efficiency rating is more representative of actual mowing conditions as it allows for turns and overlapping.

Formulas for calculating acres per hour:

100% efficiency–MPH efficiency x width of cut ÷ 99 = acres per hour | 80% efficiency–MPH efficiency x width of cut ÷ 124 = acres per hour

41

PRODUCTIVITY


RIDERS

42

RIDING MOWER SPECIFICATIONS

QUEST ® E-SERIES

Model Blades Weight Width (defl ector down) Length Height

QTE651KA421 2 Blades at 21.60" 551 lbs. 53.8 in. (136.7 cm) 71.8 in. (182.4 cm) 40.7 in. (103.4 cm)

QTE691KA501 3 Blades at 17.50" 623 lbs. 63 in. (160.0 cm) 72.9 in. (185.2 cm) 42.9 in. (109.0 cm)

decks

STYLE – Exmark Series-1 stamped steel deck. Side-discharge standard with the option

to bag or mulch.

WIDTHS AVAILABLE – 42", 50".

CUTTING HEIGHTS – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

TRACTOR FRAME – Unibody, riveted 10-ga. steel.

STEERING & MOTION CONTROL – Hydraulically dampened twin levers adjust fore and aft.

FRONT CASTER TIRES – 350/410 x 4 smooth-tread, pneumatic (42" model), 13 x 5 ribbed tread,

pneumatic (50" model).

DRIVE TIRES – 18 x 7.50-8, 4-ply Turf Tech TL (42" model), 18 x 9.50-8, 4-ply Turf Tech

TL (50" model).

TURNING RADIUS – True zero-turn.

PARKING BRAKE – Lever-actuated brake system. Integral to transaxles.

SEAT – High-back foam-padded with armrests. Hinged mounting, spring suspension.

Adjustment: Fore and aft 3 in, by loosening 2 bolts and sliding seat (42" model).

Commercial-grade, high-back, contoured and foam-padded with armrests. Hinged mounting,

spring suspension, fore and aft adjustment from operator's position (50" model).

power components

ENGINES AVAILABLE – Kawasaki ® V-Twin FR651V, FR691V

DRIVE SYSTEM – Two Hydro-Gear ® ZT2100 hydrostatic transaxles (42" model). Two

Hydro-Gear ZT2200 (50" model).

SPEED – 0–7 mph (11.3 kph) forward, 0–3.4 mph (5.5 kph) reverse.

PTO ENGAGEMENT – MagStop electromagnetic 80-ft-lbs clutch (42" model). MagStop

electromagnetic 125-ft-lbs clutch (50" model).

FUEL CAPACITY – 2.9 gallons.

RIDING MOWER SPECIFICATIONS

QUEST S-SERIES

Model Blades Weight Width (defl ector down) Length Height

QTS691KA502 3 Blades at 17.50" 681 lbs. 62.75 in. (159.3 cm) 71.8 in. (182.4 cm) 42.9 in. (109.0 cm)

decks

STYLE – Exmark Series-2 fabricated and welded steel deck. Side-discharge standard with the

option to bag or mulch.

WIDTHS AVAILABLE – 50".

CUTTING HEIGHTS – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from

operator seat with standard foot-operated assist.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

TRACTOR FRAME – Unibody, riveted 10-ga. steel.

STEERING & MOTION CONTROL – Hydraulically dampened twin levers adjust fore and aft.

FRONT CASTER TIRES – 13 x 5 ribbed tread, pneumatic.

DRIVE TIRES – 20 x 8.0-10, 4-ply Turf Master.

TURNING RADIUS – True zero-turn.

PARKING BRAKE – Lever-actuated brake system. Integral to transaxles.

SEAT – Commercial-grade, high-back, contoured and foam-padded with armrests. Hinged

mounting, spring suspension, fore and aft adjustment from operator's position.

power components

ENGINES AVAILABLE – Kawasaki V-Twin FR691V.

DRIVE SYSTEM – Two Hydro-Gear ZT2800 hydrostatic transmissions with charge pumps, no

hoses, integrated cooling fans, remote reservoir, spin-on fi lter and heavy-duty components.

SPEED – 0–7 mph (11.3 kph) forward, 0–3.4 mph (5.5 kph) reverse.

PTO ENGAGEMENT – MagStop electromagnetic 125-ft-lbs clutch.

FUEL CAPACITY – 2.9 gallons.

43

RIDERS


RIDERS

44

RIDING MOWER SPECIFICATIONS

PIONEER ® E-SERIES

Model Blades Weight Width (defl ector down) Length Height

PNE651KA482 3 Blades at 16.25" 799 lbs. 60 in. (152 cm) 78 in. (198 cm) 71 in. (180 cm)

PNE691KA522 3 Blades at 18.00" 805 lbs. 64 in. (163 cm) 78 in. (198 cm) 71 in. (180 cm)

decks

STYLE – UltraCut Series 2. Side discharge standard with the option to bag or mulch.

WIDTHS AVAILABLE – 48", 52".

CUTTING HEIGHTS – 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

TRACTOR FRAME – Unibody, welded, heavy-duty 2" square tubular steel.

STEERING & MOTION CONTROL – Hydraulically dampened twin levers, adjustable both fore

and aft, and to 2 height positions.

FRONT CASTER TIRES – 3 x 5.0-6, smooth-tread, pneumatic.

DRIVE TIRES – 20 x 8.0-10 Turf Master. ®

TURNING RADIUS – True zero-turn.

PARKING BRAKE – Lever-actuated pawl brake.

SEAT – Commercial-grade, high-back, contoured and foam-padded with armrests. Hinged

mounting, spring suspension. Fore and aft adjustment from operator's position.

power components

ENGINES AVAILABLE – Kawasaki ® V-Twin FR651V FR691V.

DRIVE SYSTEM – Two Hydro-Gear ZT2800 hydrostatic transmissions with charge pumps, no

hoses, integrated cooling fans, remote reservoir, spin-on fi lter and heavy-duty components.

SPEED – 0–7.0 mph (11.3 kph) forward, 0–4.0 mph (6.4 kph) reverse.

PTO ENGAGEMENT – MagStop electromagnetic 125-ft-lbs clutch.

FUEL CAPACITY – 7-gallon (26.5L) single fuel tank with single fi ll location.

RIDING MOWER SPECIFICATIONS

PIONEER S-SERIES

Model Blades Weight Width (defl ector down) Length Height

PNS600KA443 2 Blades at 22.25" 822 lbs. 58 in. (147 cm) 79 in. (201 cm) 72 in. (183 cm)

PNS651KA483 3 Blades at 16.25" 862 lbs. 60 in. (152 cm) 78 in. (198 cm) 72 in. (183 cm)

PNS680KC523 3 Blades at 18.00" 873 lbs. 65 in. (165 cm) 78 in. (198 cm) 72 in. (183 cm)

PNS740KC604 3 Blades at 20.50" 948 lbs. 73 in. (185 cm) 79 in. (200 cm) 72 in. (183 cm)

decks

STYLE – UltraCut Series 3. Side-discharge standard with the option to bag or mulch.

WIDTHS AVAILABLE – 44", 48", 52", 60".

CUTTING HEIGHTS – 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

TRACTOR FRAME – Unibody, welded, heavy-duty 2" square tubular steel.

STEERING & MOTION CONTROL – Hydraulically dampened twin levers, adjustable both fore

and aft, and to 2 height positions.

FRONT CASTER TIRES – 13 x 5.0-6, smooth-tread, pneumatic.

DRIVE TIRES – 22 x 9.5-12 Kenda ® tires (23 x 10.5-12 Kenda tires on PNS740KC604).

TURNING RADIUS – True zero-turn.

PARKING BRAKE – Lever-actuated pawl brake.

SEAT – Commercial-grade, high-back, contoured and foam-padded with armrests. Hinged

mounting, spring suspension. Fore and aft adjustment from operator's position.

power components

ENGINES AVAILABLE – Kawasaki ® V-Twin FX600V, FX651V, Kohler ® Command CV680, CV740.

DRIVE SYSTEM – Two Hydro-Gear ZT3100 (ZT3400 on PNS740KC604) hydrostatic transmissions

with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on fi lter and heavyduty

components.

SPEED – 0–8.0 mph (11.3 kph) forward, 0–5.0 mph (6.4 kph) reverse. (0–9.0 mph (14.5 kph)

forward, 0–6.0 mph (9.7 kph) reverse on PNS740KC604.

PTO ENGAGEMENT – MagStop electromagnetic 175-ft-lbs clutch.

FUEL CAPACITY – 7-gallon (26.5L) single fuel tank with single fi ll location.

45

RIDERS


RIDERS

46

RIDING MOWER SPECIFICATIONS

equipment

CUTTING PERFORMANCE – Side discharge with option to bag or mulch.

BLADES – 0.20"-thick (5.1 mm) alloy steel.

BLADE SPINDLES – 1.75" (44.5 mm)-diameter splined blade driver.

HYDRO FLUID – Exmark Premium Hydro Oil.

ELECTRICAL SYSTEM – 12-V battery.

ENGINE HOURMETER – Standard.

LAZER Z ® E-SERIES

decks

STYLE – Full-fl oating UltraCut Series 4. Side-discharge standard with the option to bag or mulch.

WIDTHS AVAILABLE – 48", 52", 60". 10-gauge top that is formed and continuously seamwelded.

7-gauge side skirt with wide-fl ange cutter housings.

CUTTING HEIGHTS – 1.0–4.5" in 0.25" increments, adjustable from the operator’s seat.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

TRACTOR FRAME – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.

STEERING & MOTION CONTROL – Hydraulically damped twin levers adjust fore and aft.

Adjustable dampers (3 positions) to customize drive responsiveness. Levers are also adjustable

to 2 height positions.

FRONT CASTER TIRES – 12 x 5.0-6, smooth-tread, pneumatic. (13 x 5.0-6, smooth-tread,

pneumatic on LZE740KC604).

DRIVE TIRES – 22 x 9.5-12 Turf Master. ® (23 x 10.5-12 Turf Master on LZE740KC604.)

TURNING RADIUS – True zero-turn.

PARKING BRAKE – Lever-actuated disc brake.

SEAT – High back with adjustment fore and aft.

DIAGNOSTICS – Operational diagnostics with integral fuel gauge.

power components

DRIVE-WHEEL RELEASE – Allows unit movement without engine running.

SAFETY PACKAGE – Operator Presence Controls (OPC).

ROLLOVER PROTECTION SYSTEM (ROPS) – 2-post foldable ROPS standard with seat belt

and latch.

CUP HOLDER – Standard.

DECK LIFT – Standard.

CASTERS – 0.50"-thick, double-yoke, smooth-tread caster wheel assembly with pre-installed

bearing cups.

Model Blades Weight Width (defl ector down) Length Height

LZE600KA484 3 Blades at 16.25" 1035 lbs. 59.6 in. (151.4 cm) 79.2 in. (201.2 cm) 69.5 in. (176.5 cm)

LZE691KA524 3 Blades at 18.00" 1070 lbs. 64.8 in. (164.6 cm) 79.2 in. (201.2 cm) 69.5 in. (176.5 cm)

LZE740KC604 3 Blades at 20.50" 1105 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 69.5 in. (176.5 cm)

power components

ENGINES AVAILABLE – Kawasaki ® V-Twin - FX600V, FX691V, Kohler ® Command CV740.

DRIVE SYSTEM – Two Exmark-exclusive Parker unitized pump and wheel motor systems with no

hoses, 1.7-quart integrated reservoir, spin-on fi lter and heavy-duty components. 12cc pumps and

14.5-cubic-inch motors.

SPEED – Infi nitely variable speed selection from 0–8 mph forward, 0–6 mph reverse.

PTO ENGAGEMENT – MagStop electromagnetic 175 ft-lbs clutch with spot brake. (200 ft-lbs on

LZE740KC604).

FUEL CAPACITY – 8-gallon, single fuel tank with single fi ll location.

RIDING MOWER SPECIFICATIONS

LAZER Z S-SERIES

Model Blades Weight Width (defl ector down) Length Height

LZS651KA484 3 Blades at 16.25" 1089 59.6 in. (151.4 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm)

LZS651KA484CA 3 Blades at 16.25" 1089 lbs. 59.6 in. (151.4 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm)

LZS680KC524 3 Blades at 18.00" 1088 lbs. 64.8 in. (164.6 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm)

LZS740KC524 3 Blades at 18.00" 1088 lbs. 64.8 in. (164.6 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm)

LZS691KA524CA 3 Blades at 18.00" 1088 lbs. 64.8 in. (164.6 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm)

LZS730EKC604 3 Blades at 20.50" 1133 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70 in. (177.8 cm)

LZS740KC604 3 Blades at 20.50" 1133 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70 in. (177.8 cm)

LZS740KC604CA 3 Blades at 20.50" 1133 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70 in. (177.8 cm)

LZS801PKA604 3 Blades at 20.50" 1316 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm)

LZS749EKC724 3 Blades at 24.50" 1208 lbs. 84.9 in. (215.6 cm) 86.1 in. (218.7 cm) 70 in. (177.8 cm)

LZS801KA724 3 Blades at 24.50" 1208 lbs. 84.9 in. (215.6 cm) 86.1 in. (218.7 cm) 70 in. (177.8 cm)

LZS801PKA724 3 Blades at 18.00" 1403 lbs. 84.9 in. (215.6 cm) 86.1 in. (218.7 cm) 70.5 in. (179.1 cm)

decks

STYLE – Full-fl oating UltraCut Series 4. Side-discharge standard with the option to bag or mulch.

WIDTHS AVAILABLE – 48", 52", 60", 72". 10-gauge top that is formed and continuously seam-

welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for

improved strength and reduced weight. 4-point suspension, full-fl oating deck, 4 adjustable antiscalp

rollers.

CUTTING HEIGHTS – 1.0 - 5.5" in 0.25" increments, adjustable from the operator’s seat.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

TRACTOR FRAME – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.

STEERING & MOTION CONTROL – Hydraulically damped twin levers adjust fore and aft.

Adjustable dampers (3 positions) to customize drive responsiveness. Levers are also adjustable

to 2 height positions.

FRONT CASTER TIRES – 13 x 5.0-6, smooth tread, pneumatic, on 48" and 52" units (and

LZS801PKA604, LZS801PK724, LZS730EKC604). 13 x 6.5-6, smooth-tread, pneumatic, on 60" and

72" units (except LZS801PKA604, LZS730EKC604 and LZS801PKA724).

DRIVE TIRES – 23 x 9.5-12 Turf Master on 48" and 52" units. 24 x 12-12 Turf Master on 60" and 72"

units.

TURNING RADIUS – True zero-turn.

PARKING BRAKE – Lever-actuated disc brake.

SEAT – Deluxe, two-tone, bolstered seat with Elastomeric Vibration Control (EVC) material.

DIAGNOSTICS – Operational diagnostics with integral fuel gauge.

power components

ENGINES AVAILABLE – Kohler Command CV680, CV740; Kawasaki V-Twin FX651V, FX801V,

FX691V; Kohler Electronic Fuel Injection ECV730, ECV749.

DRIVE SYSTEM – Two Exmark-exclusive Parker unitized pump and wheel motor systems

with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on fi lter and

heavy-duty components. 12cc pumps and 14.5-cubic-inch motors. Integrated shock valves

on 60" and 72" units.

SPEED – Infi nitely variable speed selection from 0–10 mph forward, 0–6 mph reverse.

PTO ENGAGEMENT – MagStop electromagnetic 200-ft-lbs clutch with spot brake.

FUEL CAPACITY – High-capacity, 12-gallon, single fuel tank with single fi ll location (except

LZS730EKC604). 8-gallon, single fuel tank with single fi ll location on LZS730EKC604. 10.3-gallon

(43.5 lbs) propane tank on LZS801PKA724.

47

RIDERS


RIDERS

48

RIDING MOWER SPECIFICATIONS

LAZER Z ® X-SERIES

Model Blades Weight Width (defl ector down) Length Height

LZX680KC486 3 Blades at 16.25" 1125 lbs. 59.6 in. (151.4 cm) 79.2 in. (201.2 cm) 70.5 in. (179.1 cm)

LZX740KC526 3 Blades at 18.00" 1116 lbs. 64.8 in. (164.6 cm) 79.2 in. (201.2 cm) 70.5 in. (179.1 cm)

LZX740KC606 3 Blades at 20.50" 1195 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm)

LZX740KC606CA 3 Blades at 20.50" 1200 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm)

LZX749EKC606 3 Blades at 20.50" 1212 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm)

LZX801KA606 3 Blades at 20.50" 1212 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm)

LZX801KA606SS 3 Blades at 20.50" 1212 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm)

LZX940KC606 3 Blades at 20.50" 1260 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm)

LZX940KC726 3 Blades at 24.50" 1292 lbs. 84.9 in. (215.6 cm) 86.1 in. (218.7 cm) 70.5 in. (179.1 cm)

LZX980KC726 3 Blades at 24.50" 1276 lbs. 84.9 in. (215.6 cm) 86.1 in. (218.7 cm) 70.5 in. (179.1 cm)

decks

STYLE – Full-fl oating UltraCut Series 6 with heavy-duty spindle. Side-discharge standard with

the option to bag or mulch.

WIDTHS AVAILABLE – 48", 52", 60", 72". 10-gauge top that is formed and continuously seam-

welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for

improved strength and reduced weight.

CUTTING HEIGHTS – 1.0-5.5" in 0.25" increments adjustable from the operator's seat.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

TRACTOR FRAME – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.

STEERING & MOTION CONTROL – Hydraulically damped twin levers adjust fore and aft.

Adjustable dampers (3 positions) to customize drive responsiveness. Levers are also adjustable

to 2 height positions.

FRONT CASTER TIRES – 13 x 5.0-6, smooth-tread, semi-pneumatic tires (48" and 52" models);

13 x 6.5-6, smooth-tread, semi-pneumatic tires (60" and 72" models).

DRIVE TIRES – 24 x 9.5-12, 4-ply Multi-Trac ® (48" and 52" models); 24 x 12.0-12, 4-ply Multi-Trac

(60" and 72" models).

TURNING RADIUS – True zero-turn.

PARKING BRAKE – Lever-actuated disc brake.

SEAT – Deluxe, two-tone, bolstered seat with Elastomeric Vibration Control (EVC) material.

Innovative Seat Isolation System (SIS) that provides operator isolation in all three planes of

motion Fore and aft adjustment from operator's position with seat fl ip-up. Suspension seat

standard on LZX801KA606SS, LZX940KC606, LZX940KC726, LXZ980KC606 and LZX980KC726.

DIAGNOSTICS – Operational diagnostics with integral fuel gauge.

power components

ENGINES AVAILABLE – Kawasaki V-Twin FX801V, Kohler Command V-Twin CV680, CV740,

CV940, CV980, Kohler Electronic Fuel Injection - ECV749.

DRIVE SYSTEM – Two Exmark-exclusive Parker unitized pump and wheel motor systems with

no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on fi lter and heavy-duty

components. 12cc pumps and 14.5-cubic-inch motors (48" and 52" models). 16cc pumps and

17.1-cubic-inch motors with integrated shock valve (60" and 72").

SPEED – Infi nitely variable speed selection from 0–10.0 mph forward, 0–6.0 mph reverse (48" and

52" models); 0–11.5 mph forward, 0–7 mph reverse (60" and 72" models).

PTO ENGAGEMENT – 200-ft-lbs on all models with engines up to FX801V up to 250-ft-lbs on all

models with CV940 and CV980.

FUEL CAPACITY - High-capacity, 12-gallon, single fuel tank with single fi ll location.

RIDING MOWER SPECIFICATIONS

LAZER Z DS-SERIES

Model Blades Weight Width (defl ector down) Length Height

LZDS902K605 3 Blades at 20.75" 1602 lbs. 72.8 in. (184.9 cm) 84.5 in. (214.6 cm) 72.7 in. (184.7 cm)

LZDS902K725 3 Blades at 24.75" 1702 lbs. 85.8 in. (217.9 cm) 88.7 in. (225.3 cm) 72.7 in. (184.7 cm)

decks

STYLE – Series 5 high-capacity cutting platform. Side-discharge standard with option

to bag or mulch.

WIDTHS AVAILABLE – 60" and 72". 10-gauge top that is formed and continuously seam-welded,

with 10-gauge top reinforcement plate, 7-gauge side skirt and 7-gauge reinforcement rings at

spindle assembly. 6" deep, 4-point suspension, full-fl oating platform with 6 adjustable coneshaped

anti-scalp rollers.

CUTTING HEIGHTS – 1.0" (2.5 cm) to 5" (12.7 cm) in 0.25" (0.64 cm) increments and adjustable

from operator's seat.

equipment

TRACTOR FRAME – Welded, heavy-duty tubular steel.

STEERING & MOTION CONTROL – Hydraulically dampened twin levers adjust fore and aft.

Levers are also adjustable to 2 height positions.

FRONT CASTER TIRES – 13 x 6.50-6, smooth-tread, semi-pneumatic tires.

DRIVE TIRES – 26 x 12-12, 4-ply MultiTrac.

TURNING RADIUS – True zero-turn.

PARKING BRAKE – Lever-actuated drum and band integrated with transmission-neutral

interlock.

SEAT – Hinge-mounted, deluxe, two-tone, bolstered, full-suspension seat with Elastomeric

Vibration Control (EVC) material. Adjusts to individual operator weight and features padded,

height-adjustable armrests.

power components

ENGINES AVAILABLE – Kubota 3-cylinder liquid-cooled diesel D902.

DRIVE SYSTEM – Two Hydro-Gear 21cc pumps with integral SCR (System Check Relief) valves (in

forward), powering two 18-cubic-inch wheel motors with 1.25" (3.18 cm)-diameter tapered shafts.

SPEED – Infi nitely variable speed selection from 0–12 mph (19.3 kph) forward, 0–8.0 mph (12.9

kph) reverse.

PTO ENGAGEMENT – MagStop electromagnetic 250-ft-lbs clutch with spot brake.

FUEL CAPACITY – 15.5-gal. (58.7-L) twin fuel tanks.

49

RIDERS


RIDERS

50

RIDING MOWER SPECIFICATIONS

NAVIGATOR ®

Model Blades Weight Width (defl ector down) Length Height

NV640KC 845 lbs. 42.6 in. (108.2 cm) 67.3 in. (170.9 cm) 51.2 in. (130.0 cm)

NV730EKC 850 lbs. 42.6 in. (108.2 cm) 67.3 in. (170.9 cm) 51.2 in. (130.0 cm)

NV740KC 850 lbs. 42.6 in. (108.2 cm) 67.3 in. (170.9 cm) 51.2 in. (130.0 cm)

CD42CD 2 Blades at 22" 325 lbs. 43.2 in. (109.7 cm) 37.2 in. (94.5 cm) 13.1 in. (33.3 cm)

CD48CD 2 Blades at 25" 295 lbs. 49.2 in. (125.0 cm) 39.9 in. (101.3 cm) 13.1 in. (33.3 cm)

decks

STYLE – Full-fl oating rear-discharge cutting deck with heavy-duty gear-driven spindle assembly.

Patented fi ll reduction baffl es standard.

WIDTHS AVAILABLE – 42" and 48". 7-gauge sides joined by a continuous bead weld to a

10-gauge top, 0.1875" wear guard is welded to entire base of deck. 7-gauge deck spindle

supports. 0.25" thick strap-iron deck supports.

CUTTING HEIGHTS – 1.0" (2.5 cm) to 4" (10.2 cm).

equipment

TRACTOR FRAME – Channeled and fully welded 1.5" x 1.5" x 0.1875" wall tubing with ground

clearance of 4.0", strategically located, continuous-force counterweight springs.

STEERING & MOTION CONTROL – FeatherTouch hand-control drive levers. Low-force

constant-speed lever.

FRONT CASTER TIRES – 8.0 x 3-4 semi-pneumatic.

DRIVE TIRES – 18 x 10.50-10 MultiTrac ® C/S.

TURNING RADIUS – True zero-turn.

power components

ENGINES AVAILABLE – Kohler ® Command CV640, ECV730, CV740.

DRIVE SYSTEM – Dual Hydro-Gear ® PJ 12cc variable-displacement pumps power in-wheel

planetary gear reduction motors.

SPEED – Infi nitely variable speed selection from 0–7 mph (11.3 kph) forward, 0–5.5 mph (8.9 kph)

reverse.

FUEL CAPACITY – 7.5-gallon pivoting tank for easier engine service.

RIDING MOWER SPECIFICATIONS

equipment

CUTTING PERFORMANCE – Side-discharge with option to bag or mulch.

BLADES – 0.20"-thick (5.1 mm) alloy steel.

BLADE SPINDLES – 1.75" (44.5 mm)-diameter splined blade driver.

HYDRO FLUID – Exmark Premium Hydro Oil.

ELECTRICAL SYSTEM – 12-V battery.

ENGINE HOURMETER – Standard.

VANTAGE ®

Model Blades Weight Width (defl ector down) Length (platform up) Height Length (platform down)

VT541KA363 2 Blades at 18" 790 lbs. 48.0 in. (121.9 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT541KA363CA 2 Blades at 18" 790 lbs. 48.0 in. (121.9 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT651KA484 3 Blades at 16.25" 855 lbs. 59.6 in. (151.4 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT691KA484CA 3 Blades at 16.25" 855 lbs. 59.6 in. (151.4 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT691KA524 3 Blades at 18" 866 lbs. 64.8 in. (164.6 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT691KA524CA 3 Blades at 18" 866 lbs. 64.8 in. (164.6 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT730EKC524 3 Blades at 18" 875 lbs. 64.8 in. (164.6 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT740EKC604 3 Blades at 20.50" 883 lbs. 72.8 in. (184.9 cm) 62.5 in. (159 cm) 50 in. (127 cm) 76 in. (193 cm)

decks

STYLE – UltraCut Series 4. Side-discharge standard with the option to bag or mulch. (Series 3

on VT541KA363 and VT541KA363CA.)

WIDTHS AVAILABLE – 36", 48", 52", 60". 10-gauge top that is formed and continuously seam-

welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for

improved strength and reduced weight. 4-point suspension with mechanical spring deck lift.

CUTTING HEIGHTS – 1.0–5.0" in 0.25" increments adjustable from the operator's position.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

TRACTOR FRAME – Welded, heavy-duty 1.5" x 3" tubular steel.

SUSPENSION PLATFORM – Self-compensating elastomer suspension. Stowable operator

platform.

STEERING & MOTION CONTROL – Twin levers with no-tools adjustable front reference bar to

modify forward ground speed.

power components

DRIVE-WHEEL RELEASE – Allows unit movement without engine running.

SAFETY PACKAGE – Operator Presence Controls (OPC).

DECK LIFT – Standard.

FRONT CASTER TIRES – 11 x 4-5, smooth-tread, semi-pneumatic tires.

DRIVE TIRES – 20 x 10-8 Turf Master ® drive tires. (18 x 8.5-8 Kenda ® Tires on VT541KA363 and

T541KA363CA).

TURNING RADIUS – True zero-turn.

PARKING BRAKE – Lever-actuated bar brake.

power components

ENGINES AVAILABLE – Kawasaki ® V-Twin FS541V, FS651V, FS691V, and Kohler Electronic Fuel

Injection ECV730, ECV740.

DRIVE SYSTEM – Two Hydro-Gear 10cc pumps powering two Parker 12-cubic-inch motors.

SPEED – Infi nitely variable speed selection from 0–8 mph forward, 0–4 mph reverse.

PTO ENGAGEMENT – 175-ft-lbs clutch (200-ft-lbs clutch on 60" model).

FUEL CAPACITY – 8-gallon, single fuel tank with single fi ll location.

51

RIDERS


WALK-BEHINDS

52

WALK-BEHIND MOWER SPECIFICATIONS

COMMERCIAL 21 S-SERIES

Model Blades Weight Width (defl ector down) Length Height

ECSKAP21 1 Blade at 20.5" 107 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm)

ECSKA21 1 Blade at 20.5" 112 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm)

decks

STYLE – Side-discharge bagger and mulch plug standard, with option to rear-discharge.

WIDTHS AVAILABLE – 21" (53.3 cm).

CUTTING HEIGHTS – 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3cm) increments.

BLADES – 0.135"-thick (3.4 cm) alloy steel.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

ENGINE DECK – 5"-deep, 0.25"-thick die-cast aluminum.

DRIVE TIRES – 9" x 2.5", semi-pneumatic.

BAG CAPACITY – 2.5 bushels (20 gallons).

SAFETY PACKAGE – Zone start.

power components

ENGINES AVAILABLE – Kawasaki ® FJ180V KAI (180cc).

DRIVE SYSTEM – Rear-wheel gear-driven. (ECSKAP21—Push only.)

TRANSMISSION – Infi nitely variable speed selection.

SPEED CONTROL – Fingertip control.

SPEED – 0.0 mph to 4.2 mph (6.6 kph) forward.

FUEL CAPACITY – 2-quart integral fuel tank.

WALK-BEHIND MOWER SPECIFICATIONS

COMMERCIAL 21 X-SERIES

Model Blades Weight Width (defl ector down) Length Height

ECXKA21 1 Blade at 20.5" 114 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm)

ECXHN21 1 Blade at 20.5" 112 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm)

ECXHNBBC21 1 Blade at 20.5" 117 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm)

ECXKABBC21 1 Blade at 20.5" 115 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm)

decks

STYLE – Side-discharge bagger and mulch plug standard, with option to rear-discharge.

WIDTHS AVAILABLE – 21" (53.3 cm).

CUTTING HEIGHTS – 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.

BLADES – 0.135"-thick (3.4 cm) alloy steel.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

ENGINE DECK – 5"-deep, 0.25"-thick die-cast aluminum.

DRIVE TIRES – 9" x 2.5", semi-pneumatic.

BAG CAPACITY – 2.5 bushels (20 gallons).

SAFETY PACKAGE – Zone start.

power components

ENGINES AVAILABLE – Kawasaki FJ180V KAI (180cc) or Honda ® GXV (160cc). All models

CARB-compliant.

DRIVE SYSTEM – Rear-wheel gear-driven.

TRANSMISSION – Infi nitely variable speed selection.

SPEED CONTROL – Fingertip control.

SPEED – 0.0 mph to 4.2 mph (6.6 kph) forward.

FUEL CAPACITY –1-gallon integral fuel tank.

53

WALK-BEHINDS


WALK-BEHINDS

54

WALK-BEHIND MOWER SPECIFICATIONS

METRO ® 26

Model Blades Weight Width (defl ector down) Length Height

MSKABBC26 1 Blade at 26.10" 151 lbs. 27.7 in. (68.6 cm) 69.0 in. (175.3 cm) 44.0 in. (111.8 cm)

decks

STYLE – Rear-discharge bagger standard with option to side-discharge or mulch.

WIDTHS AVAILABLE – 26" (66 cm).

CUTTING HEIGHTS – 1.0" (2.5 cm) to 4.0" (10.2 cm) in 0.5" (1.3 cm) increments.

BLADE-TIP SPEED – Approximately 18,500 fpm.

BLADES – 1-0.156" (3.96 mm) thick alloy steel.

BLADE SPINDLES – 1.0" (25.4 mm)-diameter, hardened steel.

equipment

ENGINE DECK – Die-cast aluminum.

DRIVE TIRES – 10 x 3-7, semi-pneumatic with die-cast aluminum rims with bearing assembly.

FRONT TIRES – 8 x 2-6, semi-pneumatic with die-cast aluminum rims with bearing assembly.

BAG CAPACITY – 3 bushels (24 gallon).

SAFETY PACKAGE – Zone start/Blade Brake Clutch (BBC).

power components

ENGINES AVAILABLE – Kawasaki ® FJ180V KAI (180cc).

DRIVE SYSTEM – Self-propelled rear-wheel gear-drive.

TRANSMISSION – 3-speed.

SPEED CONTROL – Finger-tip bail controls, infi nitely variable.

SPEED – 2.0 mph (3.2 kph) to 4.1 mph (6.6 kph) forward.

FUEL CAPACITY – 1-gallon (3.79-L).

WALK-BEHIND MOWER SPECIFICATIONS

METRO

Model Blades Weight Width (defl ector down) Length Height

MG481KA322P 2 Blades at 16.25" 421 lbs. 43.3 in. (110.0 cm) 73.0 in. (185.4 cm) 43.0 in. (109.2 cm)

MG481KA362P 2 Blades at 18.00" 451 lbs. 47.0 in. (119.4 cm) 73.0 in. (185.4 cm) 43.0 in. (109.2 cm)

MG481KA362 2 Blades at 18.00" 451 lbs. 47.0 in. (119.4 cm) 78.0 in. (198.1 cm) 43.0 in. (109.2 cm)

MG481KA483P 3 Blades at 16.25" 501 lbs. 57.9 in. (147.1 cm) 73.0 in. (185.4 cm) 43.0 in. (109.2 cm)

MG481KA483 3 Blades at 16.25" 501 lbs. 57.9 in. (147.1 cm) 73.0 in. (185.4 cm) 43.0 in. (109.2 cm)

MG481KA362CA 2 Blades at 18.00" 456 lbs. 47.0 in. (119.4 cm) 78.0 in. (198.1 cm) 43.0 in. (109.2 cm)

MG481KA483CA 3 Blades at 16.25" 506 lbs. 57.9 in. (147.1 cm) 78.0 in. (198.1 cm) 43.0 in. (109.2 cm)

decks

STYLE – Fixed-deck, side-discharge standard, with molded discharge chute and option to bag or

mulch. Series 3 (32" and 36"), Series 4 (48").

WIDTHS AVAILABLE – 32" (81.3 cm), 36" (91.4 cm), 48" (121.9 cm).

CUTTING HEIGHTS – 1.0" (2.5 cm) to 4.25" (10.8 cm) in 0.25" (0.64 cm) increments.

BLADES – Excalibur 0.20"-thick (5.1 mm) alloy steel.

BLADE SPINDLES – 1.0" (25.4 mm) diameter.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

ENGINE DECK – 7-gauge welded steel.

STEERING & MOTION CONTROL – Pistol-grip or Enhanced Control System (ECS).

TURNING RADIUS – Zero-turn around center of inside tire.

FRONT CASTER TIRES – Double-yoke, 9 x 3.5-4, smooth-tread, semi-pneumatic.

DRIVE TIRES – 32": 13 x 5.0-6, 4-ply Turf Saver ® ; 36" and 48": 13 x 6.5-8, 4-ply Turf Master. ®

; 36" and 48": 13 x 6.5-8, 4-ply Turf Master. ®

; 36" and 48": 13 x 6.5-8, 4-ply Turf Master.

SAFETY PACKAGE – Operator Presence Controls (OPC).

power components

ENGINES AVAILABLE – Kawasaki V-Twin FS481V.

DRIVE SYSTEM – Direct drive from transmission to double-belt wheel drives (single-belt on 32").

TRANSMISSION – 5-speed Peerless 700-070A.

SPEED CONTROL – Padded shift lever.

SPEED – 2.0 mph (3.2 kph) to 6.2 mph (10.0 kph) forward, reverse assist.

FUEL CAPACITY – 5-gallon (18.9-L) fuel tank.

55

WALK-BEHINDS


WALK-BEHINDS

56

WALK-BEHIND MOWER SPECIFICATIONS

VIKING

Model Blades Weight Width (defl ector down) Length Height

VH481KA362 2 Blades at 18.00" 481 lbs. 47.0 in. (119.4 cm) 78.0 in. (198.1 cm) 43.2 in. (109.7 cm)

VH481KA362CA 2 Blades at 18.00" 486 lbs. 47.0 in. (119.4 cm) 78.0 in. (198.1 cm) 43.2 in. (109.7 cm)

VH481KA483 3 Blades at 16.25" 531 lbs. 57.9 in. (147.1 cm) 78.0 in. (198.1 cm) 43.2 in. (109.7 cm)

VH481KA483CA 2 Blades at 18.00" 536 lbs. 57.9 in. (147.1 cm) 78.0 in. (198.1 cm) 43.2 in. (109.7 cm)

decks

STYLE – Fixed-deck, side-discharge standard, with molded discharge chute and option to bag or

mulch. Series 3 (36"), Series 4 (48").

WIDTHS AVAILABLE – 36" (91.4 cm), 48" (121.9 cm).

CUTTING HEIGHTS – 1.0" (2.5 cm) to 4.25" (10.8 cm) in 0.25" (0.64 cm) increments.

BLADES – Excalibur 0.20"-thick (5.1 mm) alloy steel.

BLADE SPINDLES – 1.0" (25.4 mm) diameter.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

FRONT CASTER TIRES – Double-yoke, 9 x 3.5-4, smooth-tread, semi-pneumatic.

DRIVE TIRES – 16 x 6.5-8, 4-ply Turf Master. ®

power components

ENGINES AVAILABLE – Kawasaki ® V-Twin FS481V.

PTO ENGAGEMENT – Mechanical blade engagement with blade brake.

WALK-BEHIND MOWER SPECIFICATIONS

equipment

ENGINE DECK – 7-gauge, heavy-duty, welded steel.

STEERING & MOTION CONTROL – Hydro drive with Enhanced Control System (ECS), forward/

reverse, left/right or zero-turn.

TRACKING ADJUSTMENT – Insta-Track.

DRIVE-WHEEL RELEASE – Easy-access dump valves, with engine on or off.

TURNING RADIUS – True zero-turn.

SAFETY PACKAGE – Operator Presence Controls (OPC).

PARKING BRAKE – Standard mechanical compression.

DRIVE SYSTEM – Two Hydro-Gear variable-displacement pumps and twin

high-effi ciency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.

TURF TRACER ® S-SERIES

Model Blades Weight Width (defl ector down) Length Height

TTS481KA363 2 Blades at 18.00" 569 lbs. 46.7 in. (118.6 cm) 77.7 in. (197.4 cm) 42.0 in. (106.7 cm)

TTS481KA363CA 2 Blades at 18.00" 574 lbs. 46.7 in. (118.6 cm) 77.7 in. (197.4 cm) 42.0 in. (106.7 cm)

TTS600KAE483 3 Blades at 16.25" 621 lbs. 57.9 in. (147.1 cm) 73.7 in. (187.2 cm) 42.0 in. (106.7 cm)

TTS481KA483 3 Blades at 16.25" 602 lbs. 57.9 in. (147.1 cm) 73.7 in. (187.2 cm) 42.0 in. (106.7 cm)

TTS541KA483CA 3 Blades at 16.25" 626 lbs. 57.9 in. (147.1 cm) 73.7 in. (187.2 cm) 42.0 in. (106.7 cm)

TTS600PKAE483 3 Blades at 16.25" 689 lbs. 57.9 in. (147.1 cm) 73.7 in. (187.2 cm) 42.0 in. (106.7 cm)

TTS541KA523 3 Blades at 18.00" 636 lbs. 63.5 in. (161.3 cm) 75.9 in. (192.8 cm) 42.0 in. (106.7 cm)

TTS600KAE523 3 Blades at 18.00" 659 lbs. 63.5 in. (161.3 cm) 75.9 in. (192.8 cm) 42.0 in. (106.7 cm)

decks

STYLE – Full-fl oating, side-discharge standard, with molded discharge chute and option to bag

or mulch.

WIDTHS AVAILABLE – 36" (91.4 cm), 48" (121.9 cm), 52" (132 cm).

CUTTING HEIGHTS – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.

BLADES – Excalibur 0.20"-thick (5.1 mm) alloy steel.

BLADE SPINDLES – 1.75" (44.5 mm) diameter.

BLADE-TIP SPEED – Approximately 18,500 fpm.

SPEED – Turf Tracer ® S-Series has infi nitely variable selection from 0–6.2 mph (10 kph) forward,

0–2.2 mph (3.5 kph) reverse.

FUEL CAPACITY – 5-gallon (18.9-L) fuel tank.

LUBRICATION – Synthetic oil with continuous fi ltration of hydro oil.

power components

DRIVE-WHEEL RELEASE – Allows unit movement without engine running.

SAFETY PACKAGE – Operator Presence Controls (OPC).

DECK LIFT – Standard.

equipment

FRONT CASTER TIRES – Double-yoke, 9 x 3.5-4, smooth-tread, semi-pneumatic.

DRIVE TIRES – 36": 16 x 6.5-8, 4-ply Turf Master ® ; 48", 52": 16 x 735-8, 4-ply Turf Master.

power components

ENGINES AVAILABLE – Kawasaki ® V-Twin FS481V, FS541V, FS600V.

PTO ENGAGEMENT – Mechanical blade engagement with blade brake.

ELECTRICAL SYSTEM – 12-V battery, 15-amp alternator (only on electric-start models).

57

WALK-BEHINDS


WALK-BEHINDS

58

WALK-BEHIND MOWER SPECIFICATIONS

equipment

ENGINE DECK – 7-gauge, heavy-duty, welded steel.

STEERING & MOTION CONTROL – Hydro drive with Enhanced Control System (ECS), forward/

reverse, left/right or zero-turn.

TRACKING ADJUSTMENT – Insta-Track.

DRIVE-WHEEL RELEASE – Easy-access dump valves, with engine on or off.

TURNING RADIUS – True zero-turn.

SAFETY PACKAGE – Operator Presence Controls (OPC).

PARKING BRAKE – Standard mechanical compression.

DRIVE SYSTEM – Twin Hydro-Gear variable-displacement pumps and twin

high-effi ciency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.

TURF TRACER ® X-SERIES

Model Blades Weight Width (defl ector down) Length Height

TTX640KCE N/A 439 lbs. 85.4 in. (216.9 cm) 45.0 in. (114.3 cm)

TTX650EKCE N/A 439 lbs. 85.4 in. (216.9 cm) 45.0 in. (114.3 cm)

TTX691KAE N/A 762 lbs. 85.4 in. (216.9 cm) 45.0 in. (114.3 cm)

TTX691KAECA N/A 434 lbs. 85.4 in. (216.9 cm) 45.0 in. (114.3 cm)

TTX691PKAE N/A 448 lbs. 85.4 in. (216.9 cm) 45.0 in. (114.3 cm)

FMD524 3 Blades at 18" 292 lbs. 64.0 in. (162.6 cm)

FMD604 3 Blades at 20.5" 333 lbs. 72.0 in. (182.9 cm)

decks

STYLE – Full-fl oating UltraCut Series 4. Side-discharge standard, with molded discharge chute

and option to bag or mulch.

WIDTHS AVAILABLE – 52" (132 cm), 60" (152.4 cm).

CUTTING HEIGHTS – 1.5" (3.8 cm) to 4.5 (11.4 cm) in 0.5" (1.3 cm) increments.

BLADES – Excalibur 0.20"-thick (5.1 mm) alloy steel.

BLADE SPINDLES – 1.75" (44.5 mm) diameter.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipment

FRONT CASTER TIRES – Double-yoke, semi-pneumatic, 11 x 4.0-5, smooth-tread.

DRIVE TIRES – 18 x 8.5-8, 4-ply Turf Master. ®

SPEED – 0-6.75 mph (10.9 kmph) forward, 0-2.25 mph (3.6 kmph) reverse.

FUEL CAPACITY – 5-gallon (18.9-L) fuel tank.

LUBRICATION – Synthetic oil with continuous fi ltration of hydro oil.

power components

DRIVE-WHEEL RELEASE – Allows unit movement without engine running.

SAFETY PACKAGE – Operator Presence Controls (OPC).

DECK LIFT – Standard.

power components

ENGINES AVAILABLE – Kohler ® Command CV640; Kawasaki ® V-Twin FX691V; Kohler Command

EFI ECV650.

PTO ENGAGEMENT – Electromagnetic 200-ft-lbs clutch.

ELECTRICAL SYSTEM – 12-V battery, 15-amp alternator.

ENGINE HOURMETER – Standard.

ULTRAVAC ® SPECIFICATIONS

S-SERIES 2-BAGGER FOR ALL 48" AND 52" LAZER Z MODELS

COLLECTION BAGS – Two commercial-grade, cloth mesh bags with reinforced bottoms.

TOTAL COLLECTION CAPACITY – 8 bushels (64 gallons).

DUMP MECHANISM – Manual lift-off.

BLOWER TUBE – Fixed, abrasion-resistant polyethylene.

S-SERIES 3-BAGGER FOR ALL FULL-SIZE 60" AND 72" LAZER Z MODELS

COLLECTION BAGS – Three commercial-grade, cloth mesh bags with reinforced bottoms.

TOTAL COLLECTION CAPACITY – 13.4 bushels (107.2 gallons).

DUMP MECHANISM – Manual lift-off.

BLOWER TUBE – 7.75"-diameter, fi xed, abrasion-resistant polyethylene.

LZ E-Series 48" LZ E-Series 52" LZ S & X-Series 48" LZ S & X-Series 52"

Overall Unit Length with Bagger 102.25" (259.7 cm) 102.25" (259.7 cm) 102.25" (259.7 cm) 102.25" (259.7 cm)

Overall Unit Width with Bagger 62.50" (158.8 cm) 67.75" (172.1 cm) 62.50" (158.8 cm) 67.75" (172.1 cm)

Total Bagging System Weight 266 lbs. (120 kg) 266 lbs. (120 kg) 309 lbs. (140 kg) 309 lbs. (140 kg)

IMPELLER – 5-bladed, 1/4"-thick (6.4 mm), abrasion-resistant steel with vertical axis.

IMPELLER AXIS – Vertical.

IMPELLER HOUSING – 0.187"-thick, abrasion-resistant steel.

BEARINGS – 1" (2.54 cm) sealed non-greasable bearings.

LZ S & X-Series 60" LZ S & X-Series 72" LZ DS-Series 60" LZ DS-Series 72" LZ E-Series 60"

Overall Unit Length with Bagger 107.0" (271.8 cm) 110.0" (279.4 cm) 110.9" (281.6 cm) 115.4" (293 cm) 107.0" (271.8 cm)

Overall Unit Width with Bagger 74.94" (190.3 cm) 87.38" (221.9 cm) 74.94" (190.3 cm) 87.38" (221.9 cm) 74.44" (189.08 cm)

Total Bagging System Weight 449 lbs. (204 kg) 406 lbs. (184 kg) 261 lbs. (118.4 kg) 268 lbs. (122.6 kg) TBD

IMPELLER – 5-bladed, abrasion-resistant steel, 15.0" diameter.

IMPELLER AXIS – Vertical.

IMPELLER HOUSING – 0.187"-thick abrasion-resistant steel.

BEARINGS – 1" (2.54 cm) sealed non-greasable bearings.

59

COLLECTION SYSTEMS


COLLECTION SYSTEMS

60

ULTRAVAC ® SPECIFICATIONS

X-SERIES FOR ALL 48" AND 52" LAZER Z MODELS

COLLECTION BAGS – Commercial-grade steel and polyethylene hopper with rear discharge

door. Commercial-grade cloth mesh door panel with molded lower wear panel.

TOTAL COLLECTION CAPACITY – 7 bushels (56 gallons).

DUMP MECHANISM – Single-motion actuation from operator's seat.

BLOWER TUBE – Fixed, abrasion-resistant polyethylene.

X-SERIES FOR ALL FULL-SIZE 60" AND 72" LAZER Z MODELS

COLLECTION BAGS – 3 commercial-grade, cloth mesh bags with reinforced bottoms.

TOTAL COLLECTION CAPACITY – 13.4 bushels (107.2 gallons).

DUMP MECHANISM – Manual lift-off.

BLOWER TUBE – 7.75"-diameter, fi xed, abrasion-resistant polyethylene.

LZ E-Series 48" LZ E-Series 52" LZ S & X-Series 48" LZ S & X-Series 52"

Overall Unit Length with Bagger 102.0" (259.1 cm) 102.0" (259.1 cm) 102.0" (259.1 cm) 102.0" (259.1 cm)

Overall Unit Width with Bagger 62.50" (158.8 cm) 67.75" (172.1 cm) 62.50" (158.8 cm) 67.75" (172.1 cm)

Total Bagging System Weight 288 lbs. (130 kg) 288 lbs. (130 kg) 331 lbs. (150 kg) 331 lbs. (150 kg)

IMPELLER – 5-bladed, 1/4"-thick (6.4 mm), abrasion-resistant steel.

IMPELLER AXIS – Vertical.

IMPELLER HOUSING – 0.187"-thick abrasion-resistant steel.

BEARINGS – 1" (2.54 cm) sealed, non-greasable bearings.

LZ S & X-Series 60" LZ S & X-Series 72" LZ DS-Series 60" LZ DS-Series 72" LZ E-Series 60"

Overall Unit Length with Bagger 106.5" (270.5 cm) 109.5" (286.2 cm) 109.4" (278 cm) 113.9" (289.4 cm) 106.5" (270.5 cm)

Overall Unit Width with Bagger 75.0" (190.5 cm) 87.25" (221.6 cm) 74.9" (190.3 cm) 87.4" (221.9 cm) 75.0" (190.5 cm)

Total Bagging System Weight 477 lbs. (216 kg) 434 lbs. (197 kg) 331 lbs. (150.1 kg) 338 lbs. (153.3 kg) TBD

IMPELLER – 5-bladed, abrasion-resistant steel, 15.0" diameter.

IMPELLER AXIS – Vertical.

IMPELLER HOUSING – 0.187"-thick abrasion-resistant steel.

BEARINGS – 1" (2.54 cm) sealed non-greasable bearings.

ULTRAVAC SPECIFICATIONS

2-BAGGER OPTION FOR ALL QUEST AND PIONEER S-SERIES MODELS

COLLECTION BAGS – 2 commercial-grade, cloth mesh bags with reinforced bottoms.

TOTAL COLLECTION CAPACITY – 8 bushels (64 gallons).

DUMP MECHANISM – Manual lift-off.

BLOWER TUBE – Fixed, abrasion-resistant, molded polyethylene.

All Quest and Pioneer S-Series 44" All Quest and Pioneer S-Series 48" All Quest and Pioneer S-Series 52" Pioneer S-Series 60"

Overall Unit Length with Bagger 97" (246 cm) 97" (246 cm) 97" (246 cm) 98.6" (250.5 cm)

Overall Unit Width with Bagger 58" (147 cm) 62" (157 cm) 66" (168 cm) 74" (188 cm)

Total Bagging System Weight 125 lbs. (276 kg) 125 lbs. (276 kg) 125 lbs. (276 kg) 125 lbs. (276 kg)

IMPELLER – 5-bladed, 1/4"-thick (6.4 mm), abrasion-resistant steel with vertical axis.

IMPELLER AXIS – Vertical.

IMPELLER HOUSING – 0.187"-thick, abrasion-resistant steel.

BEARINGS – 1" (2.54 cm) sealed, non-greasable bearings.

61

COLLECTION SYSTEMS


INDEX

INDEX

Brand Stories

Exmark Difference ...................................................4

Exmark Commercial Quality ..................................6

Exmark Cutting Technology ..................................8

Riding Mowers

Quest ® .....................................................................10

Pioneer ® ...................................................................12

Lazer Z ® ....................................................................14

Lazer Z DS-Series ...................................................16

Navigator ® ...............................................................18

Vantage ® ..................................................................20

Mower Charts .........................................................22

Brand Stories

ECS Controls ...........................................................26

Walk-Behind Mowers

Commercial 21........................................................28

Wide-Area Walk-Behinds .....................................30

Mower Charts .........................................................32

Warranty & Cost Benefits.................................34

Accessories & Options

UltraVac ® ..................................................................34

Riding Mowers ........................................................35

Walk-Behind Mowers ............................................37

All Mowers...............................................................39

Brand Stories

Cost of Ownership and Productivity ..................40

Specifications

Riding Mowers ........................................................42

Walk-Behind Mowers ............................................52

UltraVac ....................................................................59

More magazines by this user
Similar magazines