flow meter
flow meter
flow meter
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PRESSURE RETAINING VALVE<br />
The Differential (Pressure-retaining) valve is setted after the Flow <strong>meter</strong>. This valve<br />
does temporaly pressure on the liquid and prevent vaporization of the propan-butan, and<br />
in that way provide measuring only of the liquid phase.<br />
Nomenclature № DESCRIPTION<br />
1065.0401.01 Pressure-Retaining Valve 1"<br />
Pos. Nomenclature № DESCRIPTION<br />
1 1009.0104.02 Cover shell of Pressure-retaining valve<br />
2 1009.0104.01 Body of Pressure-reatining valve<br />
3 1030.1101.01 Screw special М10<br />
4 1030.1101.02 Mesh<br />
4.1 1030.1102.01 Shaft with thread М10<br />
4.2 1030.1102.02 Bush DN19х4.5<br />
4.3 1030.1102.03 Cap - down<br />
4.4 1030.1102.04 Washer<br />
4.5 1030.1102.05 Valve<br />
4.6 1030.1102.06 Seal DN104<br />
4.7 1030.1102.07 Seal DN30х10х1<br />
5 1030.1101.03 Adjusting nut<br />
6 1030.1101.04 Bush<br />
7 1030.1101.05 Vibration reducer<br />
Standart Products<br />
8 1030.1101.06 Spring DN4хDN33 L=70; 8,5 turns<br />
9 1030.1101.07 Spring DN3хDN23 L=70; 10 turns<br />
10 1030.1101.08 Spring DN1.5хDN26 L=25; 5 turns<br />
11 1073.0105.09 Bolt М8х30; DIN 912; 8,8<br />
12 1079.2301.09 Spring washer M8; DIN 127 B;<br />
13 1072.0507.06 Bolt М10х20; DIN 933; 5,8<br />
14 1020.0828.01 "O" ring DN 9х3.5<br />
1.3<br />
page 1 / 1
Change language