107810 V_ERBE

2
Orientation Guide
In order to find the best type of tap quickly,
please, use the orientation guide below.
3 steps to find the best tool for your application
1. Possibility
Machining 42CrMo 4; 900 N/mm 2 / material-no. 1.7225 / DIN 371 M6 6H through hole
First Step Second Step Third Step
1 2 3
Look at the chart:
Example of Materials
page 6-9
The a.m. material
42CrMo 4 (heat
treatable steel),
900 N/mm²
is line 1.2
Move on to the
Recommendation table
page 10-17
You will find the right
tools in line 1.2
Depending on hole type,
chamfer type and thread
type you will find the
catalogue-no. and the
corresponding page.
2. Possibility
You already know the Neoboss-Catalogue-No.
Move on to the according
page in the Catalogue
Here you find all necessary
information concerning
your tool.
See page 4-5 of the Chart of Catalogue-No.s and look for the appropriate page.