Views
5 years ago

1 2 3 4 A - SIPROTEC

1 2 3 4 A - SIPROTEC

Preface Typographic and

Preface Typographic and Symbol Conventions 6 The following text formats are used when literal information from the device or to the device appear in the text flow: Parameter Names Designators of configuration or function parameters which may appear word-for-word in the display of the device or on the screen of a personal computer (with operation software DIGSI), are marked in bold letters in monospace type style. The same applies to the titles of menus. 1234A Parameter addresses have the same character style as parameter names. Parameter addresses contain the suffix A in the overview tables if the parameter can only be set in DIGSI via the option Display additional settings. Parameter Options Possible settings of text parameters, which may appear word-for-word in the display of the device or on the screen of a personal computer (with operation software DIGSI), are additionally written in italics. The same applies to the options of the menus. „Messages“ Designators for information, which may be output by the relay or required from other devices or from the switch gear, are marked in a monospace type style in quotation marks. Deviations may be permitted in drawings and tables when the type of designator can be obviously derived from the illustration. The following symbols are used in drawings: Device-internal logical input signal Device-internal (logical) output signal Internal input signal of an analog quantity External binary input signal with number (binary input, input indication) External binary output signal with number (device indication) External binary output signal with number (device indication) used as input signal Example of a parameter switch designated FUNCTION with the address 1234 and the possible settings ON and OFF SIPROTEC, 7UT6x, Manual C53000-G1176-C230-2, Release date 06.2012

SIPROTEC, 7UT6x, Manual C53000-G1176-C230-2, Release date 06.2012 Preface Besides these, graphical symbols are used according to IEC 60617-12 and IEC 60617-13 or symbols derived from these standards. Some of the most frequently used are listed below: ■ Input signal of an analog quantity AND gate OR gate Exclusive OR (antivalence): output is active, if only one of the inputs is active Coincidence gate (equivalence): output is active if both inputs are active or inactive at the same time Dynamic inputs (edge–triggered) above with positive, below with negative edge Formation of one analog output signal from a number of analog input signals Limit stage with setting address and parameter designator (name) Timer (pickup delay T, example adjustable) with setting address and parameter designator (name) Timer (dropout delay T, example non-adjustable) Dynamic triggered pulse timer T (monoflop) Static memory (RS-flipflop) with setting input (S), resetting input (R), output (Q) and inverted output (Q) 7

  • Page 1 and 2: SIPROTEC Differential Protection 7U
  • Page 4 and 5: Preface Additional Support Training
  • Page 8 and 9: Preface 8 SIPROTEC, 7UT6x, Manual C
  • Page 10 and 11: Contents 10 2.2 Differential Protec
  • Page 12 and 13: Contents 12 2.14 Undervoltage Prote
  • Page 14 and 15: Contents 14 2.23 Average Values, Mi
  • Page 16 and 17: Contents A Appendix. . . . . . . .
  • Page 18 and 19: Introduction 1.1 Overall Operation
  • Page 20 and 21: Introduction 1.1 Overall Operation
  • Page 22 and 23: Introduction 1.2 Application Scope
  • Page 24 and 25: Introduction 1.3 Characteristics Di
  • Page 26 and 27: Introduction 1.3 Characteristics Un
  • Page 28 and 29: Introduction 1.3 Characteristics Ex
  • Page 30 and 31: Introduction 1.3 Characteristics 30
  • Page 32 and 33: Functions 2.1 General 2.1 General 3
  • Page 34 and 35: Functions 2.1 General 2.1.1.3 Infor
  • Page 36 and 37: Functions 2.1 General 2.1.3 Configu
  • Page 38 and 39: Functions 2.1 General Differential
  • Page 40 and 41: Functions 2.1 General Single-phase
  • Page 42 and 43: Functions 2.1 General Undervoltage
  • Page 44 and 45: Functions 2.1 General 44 Addr. Para
  • Page 46 and 47: Functions 2.1 General 2.1.4 Power S
  • Page 48 and 49: Functions 2.1 General 48 Figure 2-2
  • Page 50 and 51: Functions 2.1 General 50 Note If yo
  • Page 52 and 53: Functions 2.1 General Special Consi
  • Page 54: Functions 2.1 General 54 Current co
  • Page 57 and 58:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 59 and 60:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 61 and 62:

    Assignment of Voltage Measuring Inp

  • Page 63 and 64:

    Figure 2-9 Power measurement at gen

  • Page 66 and 67:

    Functions 2.1 General 66 The mode o

  • Page 68 and 69:

    Functions 2.1 General Figure 2-12 R

  • Page 70 and 71:

    Functions 2.1 General Current Trans

  • Page 72 and 73:

    Functions 2.1 General 72 Similar ap

  • Page 74 and 75:

    Functions 2.1 General 74 Hereinafte

  • Page 76:

    Functions 2.1 General 76 Figure 2-1

  • Page 80 and 81:

    Functions 2.1 General 80 As the abo

  • Page 82 and 83:

    Functions 2.1 General 2.1.4.4 Circu

  • Page 84 and 85:

    Functions 2.1 General 84 Addr. Para

  • Page 86 and 87:

    Functions 2.1 General 86 Addr. Para

  • Page 88 and 89:

    Functions 2.1 General 88 Addr. Para

  • Page 90 and 91:

    Functions 2.1 General 90 Addr. Para

  • Page 92 and 93:

    Functions 2.1 General 92 Addr. Para

  • Page 94 and 95:

    Functions 2.1 General 94 Addr. Para

  • Page 96 and 97:

    Functions 2.1 General 2.1.5 Setting

  • Page 99 and 100:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 101 and 102:

    Addr. Parameter C Setting Options D

  • Page 103 and 104:

    No. Information Type of Information

  • Page 105 and 106:

    2.2 Differential Protection SIPROTE

  • Page 107:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 113 and 114:

    Figure 2-25 Tripping logic of the d

  • Page 115 and 116:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 117 and 118:

    Earthed Starpoint SIPROTEC, 7UT6x,

  • Page 119 and 120:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 121 and 122:

    Use on Single-phase Auto-transforme

  • Page 123 and 124:

    2.2.3 Differential Protection for G

  • Page 125 and 126:

    2.2.5 Differential Protection for M

  • Page 127 and 128:

    2.2.6 Single-phase Differential Pro

  • Page 131 and 132:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 134:

    Functions 2.2 Differential Protecti

  • Page 140 and 141:

    Functions 2.3 Restricted Earth Faul

  • Page 142 and 143:

    Functions 2.3 Restricted Earth Faul

  • Page 144 and 145:

    Functions 2.3 Restricted Earth Faul

  • Page 146:

    Functions 2.3 Restricted Earth Faul

  • Page 150:

    Functions 2.3 Restricted Earth Faul

  • Page 153 and 154:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 155 and 156:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 157 and 158:

    2.4.1.2 Inverse Time Overcurrent Pr

  • Page 159 and 160:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 161 and 162:

    2.4.1.5 Inrush Restraint SIPROTEC,

  • Page 163 and 164:

    Figure 2-74 Fast busbar protection

  • Page 168:

    Functions 2.4 Time Overcurrent Prot

  • Page 173 and 174:

    2.4.2.3 Information List No. Inform

  • Page 178:

    Functions 2.4 Time Overcurrent Prot

  • Page 182 and 183:

    Functions 2.5 Time Overcurrent Prot

  • Page 184 and 185:

    Functions 2.5 Time Overcurrent Prot

  • Page 186 and 187:

    Functions 2.5 Time Overcurrent Prot

  • Page 188:

    Functions 2.5 Time Overcurrent Prot

  • Page 196 and 197:

    Functions 2.6 Dynamic Cold Load Pic

  • Page 198:

    Functions 2.6 Dynamic Cold Load Pic

  • Page 202 and 203:

    Functions 2.7 Single-Phase Time Ove

  • Page 204:

    Functions 2.7 Single-Phase Time Ove

  • Page 211 and 212:

    2.8 Unbalanced Load Protection SIPR

  • Page 213 and 214:

    Pickup, Trip Dropout SIPROTEC, 7UT6

  • Page 215 and 216:

    Thermal Stage Pickup, Warning Therm

  • Page 217 and 218:

    Logic SIPROTEC, 7UT6x, Manual C5300

  • Page 219:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 223:

    Example: Machine I N = 483 A SIPROT

  • Page 230:

    Functions 2.9 Thermal Overload Prot

  • Page 236:

    Functions 2.9 Thermal Overload Prot

  • Page 246 and 247:

    Functions 2.11 Overexcitation Prote

  • Page 249 and 250:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 253:

    Delay and Logic Two delay times are

  • Page 258 and 259:

    Functions 2.13 Forward Power Superv

  • Page 262:

    Functions 2.14 Undervoltage Protect

  • Page 267:

    2.15.1 Function Description SIPROTE

  • Page 271:

    Figure 2-106 Logic diagram of frequ

  • Page 275 and 276:

    2.16.4 Information List No. Informa

  • Page 277 and 278:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 279 and 280:

    Delay Time and Breaker Failure Trip

  • Page 281 and 282:

    Initiation SIPROTEC, 7UT6x, Manual

  • Page 285 and 286:

    2.18 External Trip Commands 2.18.1

  • Page 288 and 289:

    Functions 2.19 Monitoring Functions

  • Page 290:

    Functions 2.19 Monitoring Functions

  • Page 294:

    Functions 2.19 Monitoring Functions

  • Page 297 and 298:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 299 and 300:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 301 and 302:

    The following figure shows the logi

  • Page 303:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 307:

    No. Information Type of Information

  • Page 310 and 311:

    Functions 2.20 Protection Function

  • Page 312 and 313:

    Functions 2.20 Protection Function

  • Page 314 and 315:

    Functions 2.21 Disconnection of Mea

  • Page 316 and 317:

    Functions 2.22 Additional Functions

  • Page 318 and 319:

    Functions 2.22 Additional Functions

  • Page 322:

    Functions 2.22 Additional Functions

  • Page 329 and 330:

    2.22.4 Differential and Restraining

  • Page 332 and 333:

    Functions 2.22 Additional Functions

  • Page 334 and 335:

    Functions 2.22 Additional Functions

  • Page 336 and 337:

    Functions 2.22 Additional Functions

  • Page 338 and 339:

    Functions 2.22 Additional Functions

  • Page 340 and 341:

    Functions 2.22 Additional Functions

  • Page 342 and 343:

    Functions 2.22 Additional Functions

  • Page 345 and 346:

    2.22.10 Commissioning Aids SIPROTEC

  • Page 347 and 348:

    2.23 Average Values, Minimum and Ma

  • Page 349 and 350:

    2.23.2 Min/Max Measurement Setup 2.

  • Page 352 and 353:

    Functions 2.24 Command Processing C

  • Page 354 and 355:

    Functions 2.24 Command Processing 3

  • Page 356 and 357:

    Functions 2.24 Command Processing 3

  • Page 358 and 359:

    Functions 2.24 Command Processing 3

  • Page 360 and 361:

    Mounting and Commissioning 3.1 Moun

  • Page 362 and 363:

    Mounting and Commissioning 3.1 Moun

  • Page 365 and 366:

    RTD-Box SIPROTEC, 7UT6x, Manual C53

  • Page 367 and 368:

    The ratings of the fuse are printed

  • Page 369 and 370:

    Board Arrangement 7UT613/63x SIPROT

  • Page 371 and 372:

    3.1.2.3 Switching Elements on Print

  • Page 373 and 374:

    Processor Module C-CPU-2 SIPROTEC,

  • Page 375 and 376:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 377 and 378:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 379 and 380:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 381 and 382:

    Input/Output Board C-I/O-2 (only 7U

  • Page 383 and 384:

    The input/output board C-I/O-2 carr

  • Page 385 and 386:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 387 and 388:

    Input/Output Board C-I/O-9 (only 7U

  • Page 389 and 390:

    Table 3-22 Assignment of jumpers fo

  • Page 391 and 392:

    Note SIPROTEC, 7UT6x, Manual C53000

  • Page 393 and 394:

    Table 3-24 Exchange Interface Modul

  • Page 395 and 396:

    RS485 Interface SIPROTEC, 7UT6x, Ma

  • Page 397 and 398:

    3.1.3 Mounting 3.1.3.1 Panel Flush

  • Page 399 and 400:

    3.1.3.2 Rack and Cubicle Mounting S

  • Page 401 and 402:

    Figure 3-25 Installation of a 7UT63

  • Page 403 and 404:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 405 and 406:

    System interface SIPROTEC, 7UT6x, M

  • Page 407 and 408:

    RTD box SIPROTEC, 7UT6x, Manual C53

  • Page 409 and 410:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 411 and 412:

    3.3.1 Test Mode / Transmission Bloc

  • Page 413 and 414:

    Structure of the Dialog Box SIPROTE

  • Page 415 and 416:

    Structure of the Dialog Box SIPROTE

  • Page 417 and 418:

    An update is made: Exiting the Proc

  • Page 419 and 420:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 421 and 422:

    Table 3-30 Indications on matching

  • Page 425 and 426:

    Flexible Functions Current Function

  • Page 428 and 429:

    Mounting and Commissioning 3.3 Comm

  • Page 430 and 431:

    Mounting and Commissioning 3.3 Comm

  • Page 435:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 438 and 439:

    Mounting and Commissioning 3.3 Comm

  • Page 440:

    Mounting and Commissioning 3.3 Comm

  • Page 444 and 445:

    Mounting and Commissioning 3.3 Comm

  • Page 447 and 448:

    Figure 3-46 Phasor Diagram of the P

  • Page 451 and 452:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 454 and 455:

    Mounting and Commissioning 3.4 Fina

  • Page 456:

    Technical Data 4.1 General 4.1 Gene

  • Page 460:

    Technical Data 4.1 General 4.1.5 Co

  • Page 473 and 474:

    Operating Range Frequency (Transfor

  • Page 475 and 476:

    Operating Times (Generators, Motors

  • Page 477:

    Operating Time (Busbars, Short Line

  • Page 484 and 485:

    Technical Data 4.4 Time Overcurrent

  • Page 488 and 489:

    Technical Data 4.4 Time Overcurrent

  • Page 490 and 491:

    Technical Data 4.4 Time Overcurrent

  • Page 500:

    Technical Data 4.8 Unbalanced Load

  • Page 504:

    Technical Data 4.8 Unbalanced Load

  • Page 510:

    Technical Data 4.11 Overexcitation

  • Page 520 and 521:

    Technical Data 4.20 User-defined Fu

  • Page 522 and 523:

    Technical Data 4.20 User-defined Fu

  • Page 529 and 530:

    Time Synchronisation Commissioning

  • Page 531 and 532:

    4.23.3 Panel Surface Mounting (Encl

  • Page 533 and 534:

    4.23.5 Panel Surface and Cabinet Mo

  • Page 535 and 536:

    4.23.7 RTD box Figure 4-26 Dimensio

  • Page 537 and 538:

    Appendix A This appendix is primari

  • Page 539 and 540:

    Additional Specification L for Furt

  • Page 541 and 542:

    Additional Specification L for Furt

  • Page 543 and 544:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 545 and 546:

    1) Only in connection with position

  • Page 547 and 548:

    Exchangeable Interface Modules SIPR

  • Page 549 and 550:

    SIMATIC CFC 4 Varistor SIPROTEC, 7U

  • Page 551 and 552:

    7UT613*-*D/E Figure A-2 Overview di

  • Page 553 and 554:

    7UT633*-* D/E Figure A-3 General di

  • Page 555 and 556:

    7UT633*-* P/Q Figure A-4 General di

  • Page 557 and 558:

    7UT635*-* D/E Figure A-5 General di

  • Page 559 and 560:

    7UT635*-* P/Q Figure A-6 General di

  • Page 561 and 562:

    7UT613*-* B Figure A-8 General diag

  • Page 563 and 564:

    7UT633*-* B Figure A-9 General diag

  • Page 565 and 566:

    7UT633*-* N Figure A-10 General dia

  • Page 567 and 568:

    7UT635*-* B Figure A-11 General dia

  • Page 569 and 570:

    7UT635*-* N Figure A-12 General dia

  • Page 571 and 572:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 573 and 574:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 575 and 576:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 577 and 578:

    Figure A-22 Connection example 7UT6

  • Page 579 and 580:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 581 and 582:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 583 and 584:

    A.3.2 Voltage Transformer Connectio

  • Page 585:

    A.3.3 Assignment of Protection Func

  • Page 590 and 591:

    Appendix A.5 Default Settings A.5 D

  • Page 592 and 593:

    Appendix A.5 Default Settings A.5.5

  • Page 594:

    Appendix A.5 Default Settings A.5.6

  • Page 597 and 598:

    Addr. Parameter Setting Options Def

  • Page 599 and 600:

    A.8 Settings Addresses which have a

  • Page 601 and 602:

    Addr. Parameter Function C Setting

  • Page 603 and 604:

    Addr. Parameter Function C Setting

  • Page 605 and 606:

    Addr. Parameter Function C Setting

  • Page 607 and 608:

    Addr. Parameter Function C Setting

  • Page 609:

    Addr. Parameter Function C Setting

  • Page 629 and 630:

    A.9 Information List SIPROTEC, 7UT6

  • Page 631 and 632:

    No. Description Function Type of In

  • Page 633:

    No. Description Function Type of In

  • Page 637:

    No. Description Function Type of In

  • Page 640 and 641:

    Appendix A.9 Information List 640 N

  • Page 642 and 643:

    Appendix A.9 Information List 642 N

  • Page 644 and 645:

    Appendix A.9 Information List 644 N

  • Page 646:

    Appendix A.9 Information List 646 N

  • Page 650 and 651:

    Appendix A.9 Information List 650 N

  • Page 652 and 653:

    Appendix A.9 Information List 652 N

  • Page 654 and 655:

    Appendix A.9 Information List 654 N

  • Page 656 and 657:

    Appendix A.9 Information List 656 N

  • Page 658:

    Appendix A.9 Information List 658 N

  • Page 663:

    SIPROTEC, 7UT6x, Manual C53000-G117

  • Page 669 and 670:

    Literature /1/ SIPROTEC 4 System Ma

  • Page 677:

    LVU Master Metered value MLFB Modem

  • Page 683 and 684:

    Index A Acknowledgement of commands

  • Page 685 and 686:

    Fault Value Storage Storage Criteri

  • Page 687 and 688:

    P Parameter Group Changeover 36, 97

  • Page 689 and 690:

    Z Zero Current 124 Zero Sequence Cu

SIPROTEC 7SJ602 Multifunction Overcurrent and Motor Protection ...
Page 1 Page 2 Page 3 Page 4 Page 5 PDWER TooLS 日日括 ...
Wow! What A POOL! 1 2 4 3
7 8 9 8 3 4 9 0 2 9 4 0 1 .0 6 5 1 .0 4 1 1 .0 9 6 1 .1 9 2 1 .3 2 3 1 .3 6 5
Fig. 1 Fig. 2 Fig. 3 Fig. 4 - Guerbet
1 2 3 4 5 6 7 - Wizards of the Coast
JAZZFACTS 3-07 SID 1-4 vers 3:JAZZFACTS LEO 2 - Svensk Musik
2 k m 7 . 0 m l ; 1 1 . 3 : 4 5 - Cyngor Bwrdeistref Sirol Caerffili
Page 1 Page 2 Page 3 Page 4 6-THE MOORESVILLE (N.C. ...
Page 1 Page 2 Page 3 Page 4 15 From Crimp DEU re avrival of ...
Page 1 \'% m ^^-v- ^^&.; i%m Page 2 lOCf- Page 3 Page 4 Page 5 ...
1.jpg 2.jpg 3.jpg 4.jpg - Black River Imaging
Page 1 Page 2 Page 3 Page 4 LITINOVY HoRAK) E zÁRuKA 5 let ...
Rotary on the Move 1 2 3 4 5 6 7 8 - ClubRunner
Page 1 Page 2 Ball Bearings EKF 3113 Page 3 Page 4 Page 5 ...
Page 1 Page 2 Page 3 Page 4 Page 5 recision xerirnents with ...
Level Rail Step 1: Step 2: Step 3: Step 4: Step 5:
Page 1 Page 2 Page 3 Dive Computer Watch Page 4 Page 5 Page 6 ...
Rotary on the Move 1 2 3 4 6 7 8 - Rotary District 9650
17 Driving Days Bus # 1 2 3 4 5 6 7 8 Taxi White Mini Totals
19 Driving Days Bus # 1 2 3 4 5 6 7 8 Taxi White Mini Totals
Page 1 Page 2 Page 3 THE STFIUIIGEST NAME IN DRUMS Page 4 ...