RSD SLANT 2-INTO-1 EXHAUST SYSTEMS - Drag Specialties

1800-1560 

JANUARY 2013 

1800-1561 

RSD SLANT 2-INTO-1 

EXHAUST SYSTEMS 

All stainless steel construction with carbon fiber 

end caps available in two finishes 

Works Stainless/Carbon features a brushed stainless finish 

Carbon Ops version features a lightweight Gloss Carbon and Satin Black design that is dipped in the Black Ceramic for the toughest possible finish 

All TIG welded with 18mm O2 sensor bungs; O2 plugs (PART #1861-0464) are not included but are available separately for non-sensor applications 

Two step header pipes: 1.75” to 2.0” 

Includes heat shields for rear header pipe and collector inlet; also includes exhaust port gaskets 

Fiberglass and stainless steel wool baffle materials for high temperature resistance 

Muffler body measures: 17” L x 10” W x 6” D 

Includes mounting hardware and instructions 

Optional “DB Killer” sound insert provides a more toned down exhaust note 

Made in the U.S.A. 

PART # DESCRIPTION SUG. RETAIL 

FOR 04-13 XL MODELS 

1800-1560 Stainless steel $895.95 

1800-1561 Carbon Ops 995.95 

1861-0830 Opt. DB Killer sound insert 69.95

2 

0802-0723 

0802-0726 

0802-0729 

0802-0732 


FOR 00-05 FXST, 00-13 FLST (EXCEPT FXSTD, FLS, FLSTN, 07-13 FLSTF, 08-11 

FLSTSB) (29” L X 13 1 /2” W FRONT SEATING AREA X 9 1 /2” W REAR SEATING AREA) 

0802-0723 Smooth $409.95 

0802-0724 Flame 429.95 

0802-0725 1 Pillow 369.95 

0802-0726 Smooth w/ studs 429.95 

0802-0727 Flame w/ studs 439.95 

0802-0728 1 Pillow w/ studs 379.95 

DRAG SPECIALTIES SEATS 

From initial design to the fi nal fi tting processes, the longterm 

commitment to quality that the Craftsmen at Drag 

Specialties Seats demonstrate is brought out in every step 

of the process. Every one of our seats is hand-crafted using 

only the highest quality materials to provide the ultimate in 

comfort, style and durability for any bike and any rider. And 

it all takes place right here in the heartland of the U.S.A. 

ONE PIECE SOLO STYLE SEATS WITH DRIVER BACKREST OPTION 

New advanced clean appearance with an improved seating position and lower profile 

Looks like two separate seats, but is actually mounted on a single seat pan 

Solar-reflective leather in the seating area and automotive-grade vinyl on the sides (unless noted) 

Molded flexible urethane foam for maximum comfort and styling 

3 /16” ABS thermoformed seat base with carpeted bottom to protect paint 

Seats with studs feature brass nickel studs will not rust 

Optional driver backrest sold separately PART # 0822-0133 EZ Glide II Small or PART # 0822-0154 EZ Glide II Large pad or PART # 0822-0157 

EZ Glide II covertible 


1 Leather vinyl in the seating area and automotive grade vinyl on sides. 1” lighter density foam for added comfort. 

0802-0724 0802-0725 

0802-0727 

0802-0730 

0802-0728 

0802-0731 

0802-0733 0802-0734 


FOR 84-99 FXST, FLST (29” L X 13 1 /2” W FRONT SEATING AREA X 

9 1 /2” W REAR SEATING AREA) 

0802-0729 Smooth $409.95 

0802-0730 Flame 429.95 

0802-0731 1 Pillow 369.95 

0802-0732 Smooth w/ studs 429.95 

0802-0733 Flame w/ studs 439.95 

0802-0734 1 Pillow w/ studs 379.95

0802-0735 


FOR 00-05 FXST, 00-13 FLST (EXCEPT FXSTD, FLS, FLSTN, 07-13 FLSTF, 

08-11 FLSTSB) (29” L X 13 1 /4” W FRONT SEAT AREA X 7” W REAR SEAT AREA) 

0802-0735 Smooth $349.95 

0802-0736 1 Pillow 304.95 

0802-0737 Flame 369.95 

0802-0738 Smooth w/ studs 369.95 

0802-0739 1 Pillow w/ studs 319.95 

0802-0740 Flame w/ studs 379.95 

0802-0736 

“CHOPPED” ONE PIECE SOLO STYLE SEATS 

New advanced clean appearance with improved seating position and lower profile 

Solar-reflective leather in the seating area and automotive-grade vinyl on the sides (unless noted) 

Molded flexible urethane foam for maximum comfort and styling 

3 /16” ABS thermoformed seat base with carpeted bottom to protect paint 

Looks like two separate seats, but is actually mounted on a single seat pan 

Seats with studs feature brass nickel studs that will not rust 



FOR 84-99 FXST, FLST (28 3 /4” L X 13 1 /2” W FRONT SEAT AREA X 6 1 /2” W 

REAR SEAT AREA) 

0802-0717 Smooth $349.95 

0802-0718 1 Pillow 304.95 

0802-0719 Flame 369.95 

0802-0720 Smooth w/ studs 369.95 

0802-0721 1 Pillow w/ studs 319.95 

0802-0722 Flame w/ studs 379.95 

1 Leather-like vinyl in the seating area and automotive grade vinyl on sides. 1” lighter density foam for added comfort. 

SADDLEBAG TETHERS 

Includes two Drag Specialties printed tethers 

Four steel zinc plated support plates 

Four saddle bag lid screws and instructions 

Measures 83 /4” L x 73 /4” W 

Sold in pairs 


NOTE: Screws provided are for the Saddle Bag lids. Latch screws are machine screws and are not provided. 

0802-0737 

0802-0738 0802-0739 0802-0740 

0802-0717 0802-0718 0802-0719 

0802-0720 0802-0721 0802-0722 


3501-0806 For 93-13 FLD, FLHX, FLHT, FTHR, FLTR $39.95 

3

4 

0601-1998 

DRAG SPECIALTIES HANDLEBARS 

Our own line of handlebars have become an 

industry benchmark that riders everywhere ask for 

by name. Whatever your customer wants; fatter, 

wider, taller, fl atter, more comfort or perhaps just 

some added style, there is a Drag Specialties 

handlebar that will fi t their needs. Get your hands 

on some of our latest additions right here. 

1 

FOR 84-13 MODELS (EXCEPT 08-13 FLHT/FLHR/FLHX/FLTR, H-D FL TRIKE AND 11 FLSTSE2) 

PART # 

CHROME 

DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK SUG. RETAIL 

0601-1998 12” Chopper T-bar 12” 31.5” 10” 4.5” $199.95 

0601-2000 

GLOSS BLACK 

14” Chopper T-bar 14” 31.5” 10” 4.5” 199.95 

0601-1997 10” Chopper T-Bar 10” 31.5” 10” 4.5” 199.95 

0601-1999 12” Chopper T-Bar 12” 31.5” 10” 4.5” 199.95 

0601-2001 14” Chopper T-Bar 14” 31.5” 10” 4.5” 199.95 

1 /2” “BIG” BUFFALO T-BARS 

0601-1997 

Handlebars for the “biggest fattest” look 

Gloss black or chrome-plated finish 

Drilled and dimpled for stock controls 

Designed for use with 96 and newer style controls and master cylinders 

Optional gauge mounts are available separately; see the Drag Specialties 

2013 FatBook 


NOTE: Not compatible with hydraulic clutch master cylinders. 

0601-2001 

11 /4” BUFFALO T-BARS 

The ultimate 11 0601-1931 

0601-1934 

/4” diameter handlebar, 

designed for maximum comfort 

Drilled for internal wires; works with 

standard controls 

Available with a show chrome or gloss 

black finish 

Notched for throttle-by-wire capability 


0601-1930 

PART # 

CHROME 

DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK SUG. RETAIL 

0601-1929 12” T-Bar 12” 29” 9” 5” $159.95 

0601-1931 14” T-Bar 14” 29” 9” 5” 169.95 

0601-1933 

BLACK 

16” T-Bar 16” 29” 9” 5” 179.95 

0601-1930 12” T-Bar 12” 29” 9” 5” 159.95 

0601-1932 14” T-Bar 14” 29” 9” 5” 169.95 

0601-1934 16” T-Bar 16” 29” 9” 5” 179.95 

HANDLEBAR PLUG FOR TBW HANDLEBARS 

Plug the electronic throttle control notches on TBW (Throttle By Wire) handlebars 

Allow the use of TBW bars to be used on non-TBW bikes 

Equals out the right and left side of the handlebars 

Sold each 



0634-0331 Plugs for TBW handlebars $5.95

1 1 /4” BUFFALO 

RISERS 

Risers are machined from 

billet aluminum 

Fit any handlebars that have 

a 1” diameter in the 

clamping area 

Accepts Buffalo handlebar 

clamps or OEM-style 

handlebar clamps with offset 

mounting holes 

All risers use 1 /2”-13 riser bolts; 

available separately 

Pullback risers have 1” 

of pullback 


0602-0516 

STRAIGHT RISERS 

PART # 

CHROME 

DESCRIPTION SUG. RETAIL 

0602-0516 10” tall $259.95 

0602-0518 12” tall 289.95 

0602-0518 


GLOSS BLACK 

0602-0520 4” tall $94.95 

0602-0521 6” tall 104.95 


GLOSS BLACK (CONT) 

0602-0517 10” tall $199.95 

0602-0519 12” tall 229.95 

PART # 

GLOSS BLACK 


0502-0522 91 PULLBACK RISERS (1” PULLBACK) 

/2” tall $164.95 

PRELOAD FORK ADJUSTERS 

With the use of an Allen wrench, easily increase or decrease preload 

to alter the handling characteristics for a softer or stiffer ride 

Replaces the OEM top fork caps 

Available for 39mm and 49mm forks 

Easy installation. No need to remove fork or top triple tree from bike 

CNC machined from billet aluminum 

Up to 1.15” of preload adjustability 

Available in Black Ops, Contrast Cut and chrome finishes 



39MM FOR 88-13 XL MODELS, 87-94 FXR, 91-05 FXDL AND FXD (WILL NOT FIT, 

1200S OR 00-05 FXDX/FXDXT) 

0414-0444 Chrome $169.95 

0414-0446 Contrast Cut 159.95 

0414-0448 Black Ops 169.95 

MISANO STEM NUTS/BOLTS 

Designed to match RSD’s fork cap and riser hole plugs, while taking 

styling cues from High Performance suspension components 

Replaces stock steering stem nut/bolt 

CNC machined from billet aluminum and stainless steel 

Available in black, Black Ops, chrome and Contrast Cut finishes 



89-13 FLS/FLST/C/F/N (REPL. OEM #4453 BOLT & 6655 WASHER) 

0410-0180 Chrome $48.95 

0410-0187 Contrast Cut 48.95 

0410-0188 Black Ops 48.95 

84-10 FXST/C, 93-08 FXDWG, 10-13 FXDWG, 06-13 FXD, 11-13 FXS, 

84-13 FLT, FLHT, FLHR, FLHX, FLTR (REPL. OEM #45718-60 NUT, 

45727-08 WASHER, 45717-63 WASHER) 

0410-0179 Chrome 48.95 

0410-0185 Contrast Cut 48.95 

0410-0180 

0602-0520 

0602-0521 0602-0517 

0414-0445 


49MM FOR 06-13 DYNA 

0414-0445 Chrome $169.95 

0414-0447 Contrast Cut 169.95 

0414-0449 Black Ops 169.95 

0410-0188 

0414-0447 

0414-0449 

0602-0519 

0602-0522 

0410-0186 

0410-0187 

0410-0179 


84-10 FXST/C, 93-08 FXDWG, 10-13 FXDWG, 06-13 FXD, 11-13 FXS, 

84-13 FLT, FLHT, FLHR, FLHX, FLTR (REPL. OEM #45718-60 NUT, 

45727-08 WASHER, 45717-63 WASHER) (CONT) 

0410-0186 Black Ops $48.95 

88-94 FXR, 91-05 FXD, 88-13 XL (REPL. OEM #4993 BOLT & 6611 WASHER) 

0410-0184 Black 45.95 

0410-0189 Contrast Cut 48.95 

0410-0190 Black Ops 48.95 

5

6 

1800-1554 

1800-1476 

1800-1555 

STAINLESS HI-OUTPUT 2-INTO-1 

Engineered for high output engine modifications 

Dyno developed and tested to increase volumetric efficiency 

critical to extracting maximum horsepower from high output 

engine modifications 

1 3 /4” to 2” tapered headpipes with 2 1 /2” inlet to megaphone and 

4” to 4 1 /2” stepped muffler body 

3” to 3 1 /4” baffle with anti-reversion cone 

All stainless steel construction with TIG welding and raceinspired 

brushed stainless “Works” finish 

Contoured laser-cut heat shields 

Flat plane 12mm and quick access 18mm oxygen sensor ports 

for wideband tuning capability 



1800-1554 For 86-13 FXS/FLS/FXST/FLST models $999.95 

1800-1555 For 06-13 Dyna models (except FLD) 999.95 

1800-1477 


1800-14761 For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) $779.95 

1800-1477 For 06-11 Dyna models 779.95 

1800-1475 For 10-13 FLHT, FLHR, FLHX, FLTR models 779.95 

1800-14781 BLACK PRO PIPE 

Includes tuned length stepped headers with a highly efficient merge collector that feeds into the stepped 4 

For 99-08 FLHT, FLHR, FLHX, FLTR models 779.95 

1 Non-sensor applications will require O2 sensor port plug kit PART #1861-0464 (sold separately). 

1 1800-1475 1800-1478 

/2” megaphone design 

Complete with header and collector heat shields, as well as a shield over the first step of the megaphone; also features a CNC-machined chrome plated 

billet end cap 


NOTE: Not for Softail models with Heritage-style saddlebags.

1802-0260 

w/ 1801-0606 mufflers 

POWER DUALS 

Power Duals is the ticket to style, quality and performance 

More than just individual head pipes, Power Duals integrates an exclusive Vance 

& Hines Power Chamber hidden behind a contoured heat shield that generates 

more horsepower and torque than stock 

Systems include 220° full-coverage header pipe heat shields 

This new right side design eliminates the heat issues on the left side for the 

passenger, routing hot exhaust gases below the footpeg and protecting vital 

engine components and side covers from heat damage 

Allows the use of any 09-13 OEM style mufflers (sold separately) 

Conversion kit (PART #1861-0573) available separately includes grommet and 

mounting rail required to convert 10 FLTRX/FLHX models with factory 2-into-1 exhaust to Big Shot Duals, Dresser Duals or Power Duals 

Adapter kit (PART #1802-0129) available separately extends Power Duals head pipes to allow installation on H-D FL Trike models 



FOR 10-13 FLHT, FLHX, FLHR, FLTR MODELS 

1802-0260 Chrome $549.95 

DRESSER DUALS 

Independent 1 3 /4” header 

pipe system for maximum 

performance 

Include 220° full-length 2 1 /8” 

heat shields 

Allow the use of any 95-13 

OEM-style mufflers 

(sold separately) 

Perfect complement to the Vance & Hines 

Slip-on mufflers (sold separately) 

Available in chrome or black ceramic finish 

1802-0258 

w/ 1801-0311 

mufflers 

Conversion kit (PART #1861-0573) available separately includes grommet and mounting rail required to convert 10 FLTRX/FLHX models with factory 

2-into-1 exhaust to dual systems 

Adapter kit (PART #1802-0129) available separately extends Dresser Dual head pipes to allow installation on H-D FL Trike models 



FOR 10-13 FLTR, FLHR, FLHT, FLHX MODELS 

1802-0258 Chrome $479.95 

1 Non sensor applications will require sensor port plug kit PART #1861-0464. 

O2 SENSOR 

HARNESS 

EXTENSION 

6” extension harness with easy fit connectors 

Provides added slack to the rear 18mm O2 sensor harness to allow easy 

hook up; ideal for use on 10-13 XL models when using a competition 

series 2-into-1 exhaust 

No cutting or splicing required 

Sold each 



1861-0827 6” O2 extension harness $26.95 

1802-0261 



FOR 10-13 FLHT, FLHX, FLHR, FLTR MODELS (CONT) 

1802-0261 Black $619.95 

1802-0259 



FOR 10-13 FLTR, FLHR, FLHT, FLHX MODELS (CONT) 

1802-0259 Black $549.95 

REPLACEMENT 

AIR FILTER 

High-flow washable design 

Replaces filter found in Vance & Hines 

VO2 air intakes 


1011-2939 Repl. filter for VO2 Air Cleaners $65.95 

7

GAS TANKS FOR SPORTSTER 

Great looking ‘Old School’ tanks 

Attach to the stock frame mounting points 

Made from high-quality 18-gauge AKDQ special deep draw material 

Accept all 22mm H-D ® or aftermarket petcocks and L96-13-style screw-in gas caps; 

tanks for fuel-injected models accept stock OEM fuel pump assembly 


NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings. 

NOTE: All tanks are pressure-tested and are bare metal; fit before painting. 

PART # 

3.5-GAL. DISHED TANKS 


0701-0700 For 95-03 XL $372.95 

0701-0701 For 04-06 XL 399.95 

0701-0702 For 07-13 XL 424.95 

8 

0701-0700 

0701-0703 

PAUGHCO 

The good folks at Paughco like to 

proclaim that here is where “Old 

School” never went out of style. 

Take a look back through the Drag 

Specialties catalogs of years past 

and you will see Paughco there with 

us right from the start. Today you 

can fi nd all of their latest offerings 

throughout both the OldBook and 

FatBook catalogs. For today’s old 

school revival, nothing beats the 

originators at Paughco. 

0701-0704 

0701-0701 


2.9-GAL. KING TANKS 

0701-0703 For 95-03 XL $179.95 

0701-0704 For 04-06 XL 219.95

POWDERCOATED 

40-SPOKE WHEEL 

ASSEMBLIES 

Affordable 40-spoke assemblies look 

great on “old school” bikes 

Feature chrome spokes and a chrome 

steel hub with custom powdercoated hubcaps to hide the 

mounting hardware 

Designed for pre-2000 applications with 

FRONT WHEELS 


FOR 84-99 FXST (EXCEPT FXSTS MODELS), 93-99 FXDWG, 85-86 FXWG AND 

PAUGHCO WIDE SPRINGERS (WHEN USING A SINGLE DISC BRAKE) 

0203-0535 Black, 16” x 3.00” $399.95 

0203-0536 Red, 16” x 3.00” 399.95 

3 /4” Timken bearings 

Bearings are pre-set at the factory and ready to install 

Wide tire rear wheels feature a sprocket/pulley-side flange moved out 

.875” from stock for belt clearance 

REAR WHEELS 


FOR 84-99 BIG TWIN AND XL (EXCEPT TOURING MODELS) (INSTALLATION ON 

86-99 MODELS REQUIRES USE OF PULLEY SPACER, OEM #40932-81) 

0204-0425 Black, 16” x 3.00” $399.95 

0204-0426 Red, 16” x 3.00” 399.95 

CHROME 80-SPOKE 

FRONT WHEEL 

ASSEMBLIES 

80-spoke design with 6/8 gauge round 

or twisted spokes and custom nipples 

Chromed steel rims 

Chrome billet hubs with 

diamond facets 

Chrome valve stems 

Sealed wheel bearings and center 

spacers pre-installed 

Sealed spoke wells for tubeless tires 

For use with dual disc brake system 

Wheels require the use of 00-13 

brake rotors 

Round 

Spoke 


FOR 00-07 FLHT/FLHR/FLHX/FLTR MODELS 

0203-0539 21” x 3.25” w/ twisted spokes $419.95 

0203-0540 21” x 3.25” w/ round spokes 419.95 


FOR 84-99 FXST (EXCEPT FXSTS MODELS), 93-99 FXDWG, 85-86 FXWG AND 

PAUGHCO WIDE SPRINGERS (WHEN USING A SINGLE DISC BRAKE) (CONT) 

0203-0537 Black, 21” x 2.15” $399.95 

0203-0538 Red, 21” x 2.15” 399.95 


FOR 84-99 BIG TWIN AND XL (EXCEPT TOURING MODELS) 

180/200 WIDE TIRE APPLICATIONS 

0204-0427 Black, 16” x 5.50” $499.95 

0204-0428 Red, 16” x 5.50” 499.95 

0204-0429 Black, 18” x 5.50” 499.95 

0204-0430 Red, 18” x 5.50” 499.95 

Twisted 

Spoke 


FOR 08-13 FLHT/FLHR/FLHX/FLTR MODELS (W/O ABS) 

0203-0541 21” x 3.25” w/ twisted spokes $419.95 

0203-0542 21” x 3.25” w/ round spokes 419.95 

9

1” BEATER BARS 

Classic, yet simple beater for your beater bike 

Style straight up and narrow with just enough pullback 

Available in four finishes, our new stainless steel shot peen sandblast, polished and, of course, Gloss or Flat Black 

Slotted for internal wiring 

No knurling or electronic throttle control notch 


PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK SUG. RETAIL 

0601-2092 Polished 8” 27.75” 5.5” 4.75” $144.95 

0601-2093 Sandblast 8” 27.75” 5.5” 4.75” 144.95 

0601-2094 Gloss Black 8” 27.75” 5.5” 4.75” 124.95 

0601-2095 Flat Black 8” 27.75” 5.5” 4.75” 124.95 

0601-2105 Polished 10” 27.75” 5.5” 4.75” 144.95 

0601-2106 Sandblast 10” 27.75” 5.5” 4.75” 144.95 

0601-2107 Gloss Black 10” 27.75” 5.5” 4.75” 124.95 

0601-2108 Flat Black 10” 27.75” 5.5” 4.75” 124.95 

0601-2088 

0601-2090 

1” MOTO BAR 

Motocross style bar low profile 

Made with performance in mind 

Available in four finishes, our new stainless steel shot peen sandblast, polished and, of course, Gloss or Flat Black 

Slotted for internal wiring 

No knurling or electronic throttle control notch 


0601-2091 

PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK SUG. RETAIL 

0601-2088 Polished 3.5” 30” 5.5” 3.25” $144.95 

0601-2089 Sandblast 3.5” 30” 5.5” 3.25” 144.95 

0601-2090 Gloss Black 3.5” 30” 5.5” 3.25” 124.95 

0601-2091 Flat Black 3.5” 30” 5.5” 3.25” 124.95 

“KO” RAKED TRIPLE TREES 

Billet aluminum trees add 8 degrees of rake to attain proper 

geometry when using 21”, 23” or 26” front wheels (stretches the 

front of bike approximately 5”) 

Fairing maintains stock position and does not require 

angled headlight wedges or special brackets to properly adjust 

your headlight 

Triple Tree kit includes aluminum triple trees, steering stem, fork 

tube extension, fork stops, travel limiters and everything else 

necessary for installation 

Trim kits for FLTR models raise the fairing for proper clearance 

0408-0300 

(sold separately) 

NOTE: Will not work with factory diameter wheels 

NOTE: Raked triple trees change the handling characteristics of the motorcycle. Use caution until familiar with the changes. 


RAKED TRIPLE TREE KIT 

0408-0300 For 97-13 FLT, FLHT, FLHX, FLTR models $899.95 

10 

0601-2094 

0601-2106 

0601-2089 

2330-0101 


TRIM KITS 

2330-0100 For 09-13 FLTR models $149.95 

2330-0101 For 98-08 FLTR models 149.95

0713-0097 

WIDELINE OIL COOLER KITS 

Aluminum construction with durable powder-coated finish 

10-tube, two-pass design offers significantly more cooling surface than the closest competitor 

Extreme performance in a compact package; the WideLine’s special in-line turbulators add to the cooler’s efficiency with minimal oil pressure loss 

or restriction 

Specifically designed to exceed the cooling demands of the modern V-Twin motorcycle 

Kits integrate a chrome or black channel along the outer edge of the cooler to complement your engine 

Mount to the left frame down-tube, spaced away from the frame to allow airflow to both the oil cooler and the engine’s cylinders 

Mount to the frame using unique, highly-durable, Uralite mounts, which have a shock absorbing effect and clean styling 


FOR 84-99 SOFTAIL, 91-13 FXD/FXDWG, 84-99 FXR, 09-13 FLHT/FLHR/FLHX/FLTR (W/O OEM OIL COOLERS) 

0713-0097 Black $249.95 

0713-0098 Chrome 279.95 


0603-0438 For 1” bars $59.95 

0603-0439 For 11 eCADDY GARMIN NUVI 

GPS BALL MOUNT 

The simple, classy way to mount a 

Garmin Nuvi GPS 

All parts are made to last – 

machined aluminum with chrome plating and stainless steel; 

no plastic parts 

Will not scratch bars 

Faceted lug on the stem provides six mounting options to choose from 

17mm ball (same size ball as a car mount) utilizes a stock Nuvi cradle or 

the socket-mounting hole on the back of the unit; just snap the cradle 

or unit directly into the ball mount 

Kit includes: Mounting stem with 17mm ball and Mounting bracket with 

UltraSecurity feature 

Holders fit left side or right side of most 1” or 1 

/4” bars 64.95 

0603-0441 For 96-13 H-D controls 54.95 

1 /4” bars, or a mount for 

all 96-13 Harley-Davidson handlebar control clamps with 11 0603-0441 

/2” 

screw spacing 

0603-0438 

0713-0098 

11

BATTISTINIS 

As Rikki likes to point out, many of their 

contemporary products clearly demonstrate a 

blend of West Coast Style and European Infl uences 

developed through their presence and background 

in both locations. With the introduction of the new 

Wireframe line-up we told you to be watching here 

for more exciting parts in this line-up. Take a look 

now at some of the newest additions and have 

them on hand when riders come asking for them. 

1014-0126 

WIRE FRAME AIR FILTER COVERS 

Machined from 6061 T-6 aluminum 

1014-0127 

Fit any Arlen Ness Big Sucker or Screamin’ Eagle Stage I air filter kit 

Simple bolt-on installation 


PART # 

FOR STAGE 1 AIR FILTERS 


1014-0126 Chrome $379.95 

1014-0127 Black anodized 379.95 

WIRE FRAME HORN COVERS 

Machined from 6061 T-6 aluminum construction 

Simple bolt-on installation 

Direct replacement of stock “cowbell” H-D horn cover 


2107-0111 


FOR 91-13 MODELS W/ COWBELL-STYLE HORN COVER 

2107-0110 Chrome $339.95 

2107-0111 Black anodized 339.95 

12 

2107-0110 

1014-0128 

1014-0129 


FOR STAGE 1 AIR FILTERS (CONT) 

1014-0128 Chrome/black anodized $379.95 

1014-0129 Black anodized/chrome 379.95 

2107-0112 

2107-0113 


FOR 91-13 MODELS W/ COWBELL-STYLE HORN COVER (CONT) 

2107-0112 Chrome/black anodized $339.95 

2107-0113 Black anodized/chrome 339.95 

JANUARY 2013 | 9901-1366

RSD SLANT 2-INTO-1 EXHAUST SYSTEMS - Drag Specialties

Create successful ePaper yourself

Delete template?

Save as template?